sisis brochure_0811_export

World-class turf maintenance equipment

designer & manufacturer of natural and artificial

turf maintenance machinery since 1932

Export Catalogue

For over 80 years SISIS has been designing

and manufacturing exceptionally dependable,

durable maintenance equipment for sports

and amenity turf and artificial surfaces

Tractor mounted deep slitters 4

Powered slitters 5

Tractor mounted aerators 6

Powered aerators 8

Powered scarifiers 10

Tractor mounted scarifiers 13

Tractor mounted sweepers 14

Spreaders and top dressers 15

Seeders 17

Combination implement frames 18

Towed implement frames 20

Tractor mounted powered brushes 20

Tractor mounted brushes 21

Ride on brushes 22

Line markers 23

Rollers 23

Dragmats 24

Hand operated equipment 24

Welcome to the SISIS catalogue

Creating the perfect looking turf is the ultimate aim of every groundsman,

greenkeeper and gardener the world over. Whether in preparation for a

prestigious event at a national stadium or a leisurely Sunday afternoon at

the local sports club, your turfs appearance is everyone’s first impression.

The team at SISIS shares your pride in creating the best. That’s why we are

so passionate about the products we design, make and test at our factory.

Every machine is hand built by experienced engineers, drawing on a long

tradition of quality manufacturing and using only the best most reliable

materials and components.

Together with the support of our professional dealership network we

believe you invest in more than an established marque of quality, but

gain throughout the whole machine life cycle with a higher level of advice

and education, access to technical support and when required efficient

responsive parts and servicing.

Team SISIS look forward to supporting every step you take towards

achieving the ultimate result.

designer & manufacturer of natural and artificial turf maintenance machinery since 1932

Football Hockey Rugby Cricket Bowls Croquet Tennis Golf Amenity Artificial

Tractor mounted deep slitters Tractor mounted deep slitters

Powered slitters

Megaslit

Maxislit

Deep slitting aerators give deep, clean penetration with minimal surface disturbance.


• Choice of interchangeable slitting tines to suit different ground conditions. • The angle of the tines and spiral design of tine shaft assist penetration giving

maximum underground cultivation with minimum surface disturbance. • Tine plates have a wide rim to reduce marking in soft or undulating conditions.• Safety guard is quickly removed for easy tine change.• Standard cat.1, 3-point linkage. • Simple design for low maintenance.• Requires minimum 40 hp unit

Option

Floating rear roller.

• Choice of interchangeable slitting tines to suit different ground conditions. • The angle of the tines and spiral design of tine shaft assist penetration giving

maximum underground cultivation with minimum surface disturbance. • Tine plates have a wide rim to reduce marking in soft or undulating conditions. • Safety guard is quickly removed for easy tine change. • Standard cat.1, 3-point linkage. • Simple design for low maintenance.• Requires minimum 25-35 hp unit

Description Code Order ref

2.5m wide deep slitter MG/240 FS0717includes 32 x F35602 tines

Optional roller MG/240PR FS1097


1.8m wide deep slitter MX/160 FS0634includes 32 x F34842 tines and roller

5 4 FULL SPECIFICATION AVAILABLE ON www.sisis.com FULL SPECIFICATION AVAILABLE ON www.sisis.com

Sports Fields

Sports Fields

Golf

Golf

Amenity

Amenity

Multislit

Autoslit


Deep slitter suitable for use on fine or outfield turf. Deep clean slitting action with minimal surface marking.

• Choice of interchangeable slitting tines to suit different ground conditions.• The angle of the tines and spiral design of tine shaft assist penetration giving

maximum underground cultivation with minimum surface disturbance.• Tine plates have a wide rim to reduce marking in soft or undulating conditions.• Standard cat.1, 3-point linkage. • Simple design for low maintenance.• Can be used with most trucksters by use of a Variable Pressure Frame.• Requires minimum 15-25 hp unit

Option

Weights (weight bar will accept max 10, 25kg weights ref. F33150).

• Choice of interchangeable slitting tines to suit different ground conditions.• The angle of the tines and spiral design of tine shaft assist penetration giving

maximum underground cultivation with minimum surface disturbance.• Tine plates have a wide rim to reduce marking in soft or undulating conditions.• Safety guard is quickly removed for easy tine change.• For ease of use, and to comply with EU lifting regulations, the patented design

uses a cantilever system to lift the machine out of work.• Incorporates rear smoothing roller.


1.5m wide deep slitter MS/1500 FS1173includes 40 x D6951 tines

Optional tines (40/unit) 152mm heavy duty D7493

152mm sharpened D6951

203mm sharpened D6998


6.5hp deep slitting aerator AS/1000 FS0819includes 24 x D6951 tines

Optional tines (24 per unit)152mm heavy duty D7493

152mm fine turf D6951

Sports Fields

Sports Fields

Golf

Golf

Amenity

Amenity

Tractor mounted Aerators Tractor mounted Aerators

Multitiner 1.8m Mounted Rolaspike

Multitiner 1.2m

Javelin Aer-Aid 1500

Tractor mounted drum-type aerator for use on fine turf.

Tractor mounted Sarel type roller.

Tractor mounted drum-type aerator for use on fine turf. Also suitable for use on outfield turf such as soccer pitches.

Vertical action, air-injection aerator for fine and outfield turf.

• Three drums with independent rotation.• Choice of interchangeable tines with a maximum working depth of 100mm (4ins).• Quick release pins and clips for rapid tine change.• Standard cat. 1, 3-point linkage for use on most compact tractors.• Simple design for low maintenance.• Guards are easily removed.• Roller, fitted as standard can be used for extra weight in hard conditions.• Tractor power requirement - 30hp minimum.

• 180cm wide Sarel type roller.• Working depth of up to 50mm.• Three rotating drums on one shaft.• Fast forward speed for excellent productivity.• Can be fitted to the SISIS Single Play, Twin Play, Quadraplay for fitting to the

tractor 3 point linkage.• Tractor power requirement - 30hp minimum.

• Choice of interchangeable tines Max working depth of 100mm (4 ins).• Quick-release pins and clips for rapid tine change Integral weight bar for additional

weights if required.• Rear spring-loaded pressure roller fitted as standard Standard cat.1.• 3-point linkage for use on most compact tractors.• Can also be adapted to fit most trucksters. • Simple design for low maintenance.• Tractor power requirement - 30hp minimum.

Option

Swath boards (for use with hollow tines only).

• Minimal Surface Disturbance Depth is infinitely variable to a maximum of 127mm (5ins).

• Quick, single-lever depth setting for easy adjustment.• Cam trigger mechanism ensures that the air is always expelled at

the bottom of the tine penetration, enabling treatment to be targeted precisely and consistently.

• Working at 75mm (3ins) spacing, air is introduced at a rate of 88 litres (3cu.ft.) per minute.

• The air injection tines are specially designed to use the maximum air available from the compressor which produces clean, fresh air at a constant rate.

• Tipped tines for extra durability.• Alternative tines for other operations such as hollow coring prior to top

dressing.• Wide working width.• Fast forward speed for excellent productivity.• Minimal maintenance – all bearings fully sealed and no grease

nipples in the drive system.• Quiet in operation.• Quality British made Compair compressor.• Tractor power requirement - 30hp minimum.

Options

Rear pressure rollers


1.8m wide drum aerator (less tines) MT/180 FS1179includes roller

Optional tines - set of 120 100mm solid tine HS D6728

100mm chisel tine OSH D2109

76mm hollow tine HO D2048

115mm Jumbo hollow tine F35967

76mm pencil tine SL D2047


1.8m wide drum Rolaspike RS/180 FS1169(requires Single Play frame)

Single play frame SP FS0870


1.2m wide drum aerator (less tines) MT/4 FS0546

Optional tines - set of 96 100mm solid tine HS D6728


76mm hollow tine HO D2048

115mm Jumbo hollow tine F35967

76mm pencil tine SL D2047


1.5m wide vertical action air injection JV/1500/AA FS1066aerator (includes set of air/non air tines)

Special tines (set of 10 tines) 127 x 10mm ‘air tines’ F36948

127 x 10mm ‘non air tines’ F36949

Optional rear pressure roller FS1115

Optional turf retainers FS1009

Optional tines (20 or 30 per set)

127mm solid tine set of 20 F31730 set of 30

127 x 7mm pencil tine set of 20 F33965 set of 30

127 x 16mm hollow tine set of 20 F31277 set of 30

114mm Jumbo hollow tine set of 20 F35967 set of 30

100 x 12.5mm hollow tine set of 20 F36447 set of 30

Sports Fields

Sports Fields

Sports FieldsSports Fields

Golf

Golf

GolfGolf

Amenity

Amenity

AmenityAmenity

76 FULL SPECIFICATION AVAILABLE ON www.sisis.com FULL SPECIFICATION AVAILABLE ON www.sisis.com

Powered Aerators Powered Aerators

Arrow Aer-Aid Supaturfman

Dart

Arrow

Independently powered vertical-action air-injection aerator.

Independently powered, heavy duty aerator for bowling greens, tennis courts, cricket squares etc.

Independently powered vertical action aerator for bowling greens, tennis courts, cricket squares etc.

Powered, vertical-action aerator.

• Working width 600mm.• Wide range of interchangeable tines.• Up to 12.5cm (5ins) working depth.• Variable tine spacing.• Minimal surface disturbance.• Powerful 13hp engine.• Assisted lift for easy operation.• Independent disengagement of tine drive.• Vibration reducing handles.• Quality British made Compair compressor.

Option

Optional tines see Arrow.

• 100mm depth with minimal surface disturbance.• Working depth of 10cm (4 ins) max.• Choice of interchangeable tines.• Pivoted tine bar for vertical penetration and withdrawal

without surface disturbance.• 6.5hp engine.• Will also operate on spiker-slitter.• Supplied with transport trolley.

Option

Spiker-slitter ref. SS/3T width 90cm (35 ins).

• Working depth of 100mm (4 ins) max.• Wide range of interchangeable tines. • Clean, vertical penetration and withdrawal without

surface disturbance.• All controls, including balanced depth control, adjust-

able from operating position.• “Easy lift” system for effortless turning and transport• Designed for ease of handling.• Minimal maintenance with sealed bearings and easily

removed cover.• Effortless depth selection with clearly visible indicator.• 100mm depth with minimal surface disturbance.

Option

Swath Board

• Working width 600mm.• Wide range of interchangeable tines.• Up to 12.5cm (5ins) working depth.• Variable tine spacing.• Minimal surface disturbance.• Powerful 10hp engine.• Assisted lift for easy operation.• Independent disengagement of tine drive.• Vibration reducing handles.• Complies with all EU safety regulations.


60cm wide independently powered ARW/AA FS1178vertical action air injection aerator

Special tines (set of 4 tines) 127 x 10mm ‘air tines’ F36948

127 x 10mm ‘non air tines’ F36949

Optional Arrow Aer-Aid tines are listed below as Arrow


6.5hp drum type aerator. Less tines SMA/444/2/6 FS0637Includes transport trolley

Q/R tines (set of 32 tines) 100mm solid tine F34682

100mm pencil tine F35079

100mm hollow coring tine F34984

100mm chisel tine F35078

114mm Jumbo coring tine F35077

0.9m spiker slitter attachment SS/3T FS0312


6.5hp vertical action aerator. Less tines DRT/42 FS1108

Tines (set of 8 tines) 100mm solid tine HS D6728

100mm pencil tine F34257

100mm hollow coring tine OGH D2107


100 x 10mm hollow tine F36447

Optional Swath Board FS1117


60cm wide heavy duty, vertical action ARW/60 FS1129aerator. Less tines

Optional tines (8 or 12 per set) for both Arrow and Arrow AerAid

127mm solid tine set of 8 F31730 set of 12

127 x 7mm pencil tine set of 8 F33965 set of 12

127 x 16mm hollow tine set of 8 F31277 set of 12

114 x 22mm Jumbo hollow tine set of 8 F35967 set of 12

100 x 12.5mm hollow tines set of 8 F36447 set of 12

100mm chisel tine set of 8 D2109 set of 12


Sports Fields

Sport

Sports Fields

Golf

Golf

Golf

Amenity

Amenity

Amenity

Sport Golf Amenity

Powered Scarifiers Powered Scarifiers

Auto Rotorake Mk.5 Rotorake 450Heavy duty scarifier for removal and control of thatch on fine and other quality turf.

Scarifier with power to the reel and assisted drive to the rear tyres, for removal and control of thatch on fine turf.

• Working width of 50cm (20ins).• Cutting reel safety brake.• Contra-rotating reel with specially designed tipped blades for clean,

consistent cut and maximum thatch removal.• Alternative blades for light scarifying.• Optional Brush Reels, Rolaspike Reel.• Depth of cut adjustment control is mounted on the handle to enable

depth to be set whilst moving forwards.• User-friendly, operator presence controls designed for maximum

operator safety.• Easy-fit collector box.• 6.5hp petrol engine with independent drive to wheels and reel.• Careful weight distribution, slick tyres and full differential ensure

ease of turning and minimal surface marking.• Optional artifical surface Brush Reels.

• Working width of 46cm (18 ins).• Contra-rotating reel with blades spaced at 1.8cm (3/4in) for clean,

consistent cut.• Choice of reels for year-round use.• O.P.C. controls for operator safety.• Depth of cut adjustment control is mounted on the handle to enable

depth to be set whilst moving forwards.• Collector box.• 4hp petrol engine.• Optional artifical surface Brush Reels.


50cm wide powered scarifier. 24 tungsten blades & collection box.Honda engine FS1052

Optional complete reels (ARR/5 only) 50cm thatch removal reel with ARR/5TR FS109337 x 1.6mm tipped ‘hook’ blades

50cm light scarifying reel with ARR5/LRS FS109837 x 1mm tungsten tipped blades

50cm thatch control reel with ARR5/TCR FS109526 x 4926 blades

50cm wide spiral brush reel ARR/5BR FS1088

50cm wide synthetic brush reel ARR/5SSR FS1090

50cm wide Rolaspike reel ARR/5RS FS1113


45cm wide scarifier. Fitted with thatch RR450 FS1130removal reel & collection box.

Optional complete reels (also suitable for ARR4 and STR/18/2) Thatch removal reel (RR450) 450/TRR FS1161

Brush reel ARR/BR FS0818

Verticut reel ARR/RRT FS0292

Thatch control reel ST/TCR FS087/09

Tri-tipped Reel FS1185

Rolaspike reel 450/RS FS1160

Synthetic brush reel ARR/SBR FS0867


Sport

Sport

Golf

Golf

Amenity

Amenity

Synthetic

Synthetic

Powered Scarifiers Tractor Mounted Scarifiers

Rotorake 602 & 602S Veemo Mk2

Rotorake TM1000

Reels for existing SISIS Rotorake Mk3/Mk4 and Trio Rotorake (STR18/2)

Heavy Duty Powered Scarifier, de-thatcher and Linear Aerator. Seeder option available.

A purpose designed, heavy duty scarifier using strong cutting blades for maximum thatch removal with minimum surface disturbance.

Combined de-thatcher and Linear Aerator with collection.

• Working depth of 50mm (2 ins) max.• Working width of 60cm (24 ins).• Contra-rotating reel for clean, consistent cut.• Front or rear discharge.• Choice of blades, with variable spacing, for year-round use.• Tungsten tips are 25mm long for a longer working life.• 6 forward speeds for efficiency under varying conditions & depths.• Reverse gear for manoeuvrability.• O.P.C. controls for operator safety.• New box design.• Powerful 14hp V twin petrol engine for smooth running and low

vibration, with independent drive to wheels and reel.

• Improved chassis design incorporating pivoted rear section and support wheels at front.

• Efficient hydraulic system with large volume tank, fewer pipe connections and stainless steel braided flexible pipes for improved heat dissipation.

• Direct drive to tine shaft via hydraulic motors mounted on scarifying units.• Extra durable tungsten tipped, hook blades with variable spacing.• Improved depth setting incorporating locking micro-adjusters on each unit.• Blades new registered design.• Tractor power requirement - 30hp minimum.

Option

Integral heavy-duty oil cooler.

• Floating unit to follow ground contours.• Fast ground coverage.• Interchangeable blades and optional variable spacing.• Quick, simple depth setting without tools to max. 50mm.• Contra-rotation of reel throws debris forward for clean,

consistent groove.• Standard Cat.1, 3-point linkage.• Collector box for use when working to depth of 25mm.• When used without collector box, scarifying unit can be offset

so that wheels do not run over the removed thatch.

Option

Hydraulic tipping kit.


Rotorake 60260cm wide heavy duty de-thatcher with RR/602 FS11542mm tungsten blades & collection box.

Rotorake 602Sas above but fitted with seeder RR/602S FS1125

Optional reels

Standard thatch removal reel (23 x F36560 blades) FS1155

Light scarifying/verticut reel (44 x F36653 blades) FS1156

Rolaspike reel FS1158

Faze-Mo reel (11 x F37536 blades) FS1159

Spiral brush reel FS1157


Triple, mounted hydraulic driven, 2m wide. VMO/2 FS1014Includes 57 2mm tungsten tipped blades.

Spare blades (set of 57) 2mm tungsten tipped ‘hook’ blades F36560

1mm tungsten tipped ‘hook’ blades F36653

Optional oil cooler kit VMO2TK FS1132


1m wide mountes scarifier with single shaft. RRTM/1000 FS10352mm tungsten tipped blades & collector

Optional Faze-Mo reel FS1183

Options Faze-Mo blades (set of 19) F37536

1mm tungsten tipped blades (set of 54) F36608



Optional hydraulic tip kit FS1061


Brush reel ARR/BR FS0818

Verticut reel ARR/RRT FS0292

Thatch control reel ST/TCR FS087/09

Thatch removal reel (ARR/3 & STR/18/2) ST/TRR FS087/13

Thatch removal reel (ARR/4) ST/TRR/4 FS087/27

Rolaspike reel ARR/RS FS1160

Synthetic brush reel ARR/SBR FS0867

Sports Fields Golf Amenity


Sports Fields

Sports Fields

Golf

Golf

Amenity

Amenity

Tractor Mounted Sweepers Tractor Mounted Sweepers

Spreaders & Top Dressers

Litamina 1200 & 1500 SSS1000

PowaspredLitamisa 1800

Compact sweeper/collector for collecting all types of surface debris from fine turf and outfield turf.

A rotary brush for use on artificial turf surfaces to remove surface debris, lift the pile and redistribute sand or rubber crumb infill giving your surface maximum performance and life.

Top dresser which spreads a wide range of materials, at the desired rate, with an even consistent spread.Tractor mounted sweeper and collector for collecting

all types of surface debris from large areas.

• Collects wide range of materials incl. leaves, pine needles, grass clippings, thatch, cores, litter.

• Spiral design brush for effective collection.• Follows ground contours.• Simple brush adjustment without tools.• Large capacity hopper.• Hydraulic tip facility for easy emptying.• Useful for occasional use on paths and car parks.• Mesh hopper model for use on synthetic turf.• Standard cat 1, 3-point linkage, PTO drive.• Tractor power requirement 1200 - 25hp minimum.• Tractor power requirement 1500 - 30hp minimum.

• Aluminium hopper with stainless steel mesh for long life.• Adjustable drawbar which lifts upright for easy storage.• Hopper quickly removed for emptying.• Fast workrate keeping surfaces in play.• Wheel drive to the brush is disengaged by simple “pull & twist”

clutch levers on each wheel for transport between sites.• Adjustable brush to increase/decrease ground engagement and

to allow for brush wear.• Robustly constructed and low maintenance.• Tractor power requirement - 12hp minimum.

• Infinitely variable spreading rates.• Accurate placement.• Oscillating base plate to reduce bridging.• Rotating brush at point of discharge to ensure even spread.• 540 PTO drive from tractor.• Cable controls for material shut-off from tractor. • Handles with ease wide variety of materials even when damp,

especially sand based dressings.• Wheeled version has 4 turf-tyres on a twin axle to avoid marking

and to spread load on fine turf.

• Collects wide range of materials incl. leaves, pine needles, grass clippings, thatch, cores, litter.

• Spiral design brush for improved collection.• Follows ground contours.• Simple brush adjustment without tools.• Large capacity hopper.• Hi-tip facility.• Useful for occasional use on paths and car parks.• Standard cat 1, 3-point linkage, PTO drive.• Tractor power requirement 1800 - 45hp minimum.


Litamina HT1.2m wide sweeper with standard hopper HLL/1200 FS1070

Litamina SH1.2m wide sweeper with mesh hopper HLL1200SH FS1072

Litamina 15001.5m wide sweeper HLL/1500 FS1047


Artificial surface sweeper SSS/1000 FS1079


Top dresser with wheels & drawbar TDM/48PT FS0780 Description Code Order ref

1.8m wide sweeper with high tip facility RSC/6HT FS0428

Sports Fields

Sports Fields

Sports Fields

Sports Fields

Golf

Golf

Golf

Amenity

Amenity

Amenity

Amenity


Synthetic1200

version only

Synthetic

Spreaders & Top Dressers Seeders


Autospred Variseeder 1300

Truspred

Independently Powered Top Dresser. Versatile Tractor Mounted Seeder.

Hand Operated Spreader and Top Dresser.

• Infinitely variable spreading rates.• Oscillating base plate to reduce bridging.• Rotating brush at point of discharge to ensure even spread.• Slick tyres to avoid marking on fine turf.• OPC controls for safe, easy handling.• Hydrostatic drive for manoeuvrability.• Compact size for areas with restricted access, and for convenient. storage.• Independently powered – no tractor required.• Electric start.

• Seeding rate is variable and is simple and accurate to set by Zero-Max box.

• Fast work rate.• Overseeding carried out without taking ground out of play.• Studded roller creates seed bed.• Low maintenance with few wearing parts.• Integral weight bar. • Standard cat.1, 3-point linkage for use on most compact tractors.• Can be adapted for use with most common power units for golf

course and sports ground work.• An Ultra Fine seed roller is available for sowing pure bents.• Storage trolley.• Two discharge roller options for all types of seed. - Standard for rye and bent/fescue mixes. - Ultra fine for pure bents.

• Simple to set spreading rates.• Ribbed rubber conveyor belt for accurate placement.• Marker to avoid gaps or overlapping.• Carrier wheels permit spread right to the edge of bowling greens.• Rubber tyres to minimise marking.


11hp self propelled top dresser ASD/33 FS0557 Description Code Order ref

1.3m wide seeder with discharge roller VSE/1300 FS1056(please specify ultra fine or standard)

Optional discharge rollerUltra fine, for pure bent seed only VSE/USFR FS1059

Standard, for rye grass/fescue bent VSE/SR FS1057


0.9m wide drop spreader TSD/36 FS1174

Sports Fields

Sports Fields

Golf

Golf

Amenity

Amenity

Sport Golf Amenity

Implement Mounted Frames Implement Mounted Frames Options


Combination Implement Frames

1.8m Implements

1.2m Implements

1.3m Implements

2.4m Implements

Single pass maintenance system incorporates a mounted frame which accepts a variety of different implements for use on both turf and hard porous surfaces.

• Versatile – can be used on natural turf, synthetic turf and hard porous surfaces.

• Fast – Up to four operations carried out simultaneously.• Agri-jacks allow implements to be used lightly or more

aggressively as required.• 183cm and 244cm working widths available.• Quadraplay has carrying platform for hand tools, seed etc.• Connects to any tractor with 3-point linkage and utility

trucks with suitable frame.• Robustly constructed and very low maintenance.

Quadraplay - 4 implements

Twinplay - 2 implements

Tri-play - 3 implements

Singleplay - 1 implements


Quadraplay frame for 4 implements QMF FS0758

Tri-play frame for 3 implements TRP FS0870+FS1001

Twinplay frame for 2 implements TWP FS0870+FS1123

Singleplay frame for 1 implement SP FS08700


Intermediate rake QMR/6 FS0759

Tilth rake QTR/6 FS0760

Spring tine grooming rake QGR/6 FS0761

Fine grooming rake FGR/6 FS1075

Levelling lute QTL/6 FS0762

Roller QR/6 FS0763

Spiker slitter QSS/6 FS0764

Brush QB/6 FS0765

Flexicomb FXC/6 FS1134

Zig zag brush ZZB/6 FS0869

2m wide grader plate for sand tracks QGP/6 FS1111/1110

Rola Spike 180 RS/180 FS1169


Spring tine grooming rake QGR/8 FS0771

Fine grooming rake FGR/8 FS1076

Levelling lute QTL/8 FS0772

Roller QR/8 FS0773

Spiker slitter QSS/8 FS0774

Brush QB/8 FS0775

Zig zag brush ZZB/8 FS0516

2.4m wide grader plate for sand tracks QGP/8 FS1111/1109

Sports Fields Golf Amenity Synthetic


Deep slitter (32 x D6951 tines) FS1162

Spiker slitter SS/4MT FS0561

Grooming rake QGR/4 FS1148

Brush QB/4 FS0865

Roller QR/4 FS0863


Flexicombe FS1163

Tractor Mounted Brushes

Tractor Mounted Powered Brushes


Osca 3

Flexibrush

Varibrush

Tractor mounted oscillating brush.

Tractor mounted brush.

Tractor mounted multiple-action brush.

• Equally effective on natural and synthetic turf.• Aggressive brushing action disperses top dressing quickly and evenly,

preventing excess material being left on the surface where it could contribute to disease.

• On synthetic surfaces, keeps infill mobile, preventing surface compaction and loss of porosity.

• On synthetic surfaces, maintains infill level at a constant depth, giving consistent playing characteristics, and preventing pill damage caused by reduced infill levels.

• Uses fewer passes than conventional drag brushes, causing less compaction.

• Option of using any 1.8m implements from mounted frame options using twin implement extension arm kit.

• Storage frame is supplied as standard.

• Equally effective on natural and sand filled synthetic turf.• 5.35m wide working width.• Brush sections float to follow ground contours.• Outer sections fold for transport and storage.• Supplied with stand and castors for easy movement when storing.

• Equally effective on natural and synthetic turf.• Multiple action means fewer passes and therefore reduced compaction.• Easy to handle and attach.• Drawbar is adjustable for towing height and length.• Brush frame is reversible to allow for brush wear.• 1.85m wide working width.• Three versions are available: - 3-point mounted for tractors & trucksters (adaptor frame required). - Manual lift towing frame & ball hitch. - Electric lift towing frame & ball hitch.


1.8m wide, 3 point linkage mounted OSC/3 FS0958

Optional twin implement extension arms FS1123

Optional 1.8m wide brush QB/6 FS0765

For other prices see mounted frame implements

Retro-fit storage frame FS1136


5.35m wide, 3 point linkage mounted FBR/537 FS1033


Complete unit with wheels including: VBR/186 FS1023

Mounting options - please specify when ordering3 point linkage mounting frame FS1023+FS1029

manual lift towing frame & ball hitch FS1023+FS1024

electric lift towing frame & ball hitch FS1023+FS1027

Sports Fields

Sports Fields

Sports Fields

Golf

Golf

Golf

Amenity

Amenity

Amenity

Synthetic

Synthetic

Synthetic

Implement Frames

Towed Implement FrameDesigned specifically for daily maintenance of artificial surfaces, keeping it in good playing condition and maximising surface life. Ideal for towing behind small compact garden tractors.

• Implements can be used singly, or in pairs.• Enables Quadraplay implements to be used even when

hydraulic lift is not available.• Specific 1.2m implements.

Option

Electric winch lift option for easy lifting without getting off the power unit.


Towed single implement frame - manual lift TIF FS1118

Towed single implement frame - electric lift FS1118+FS1122

Twin implement extension arms FS1123

Specific Implements1.2m wide deep slitter (32 x D6951 tines) FS1162

1.2m wide spiker slitter SS/4MT FS0561

1.2m wide grooming rake QGR/4 FS1148

1.2m wide brush QB/4 FS0865

1.3m wide flexicombe FS1163

1.2m wide roller QR/4 FS0863Sports Fields Golf Amenity Synthetic

Ride-on Brushes Line Markers

Rollers


Robbi Truline

TrulevelRosca

Ride-on triple brush. Unique, continuous belt system ensures positive adhesion to the surface and a continuous supply of marking liquid.

Bowling Green Roller.

Ride-on brushing system, comprising a pair of mid-mounted oscillating brush units and three rear-mounted brushes.

• Equally effective on natural and synthetic turf.• Specially designed “S” brushes for improved brushing effect.• Interchangeable brushes for different surfaces and conditions.• Brushes are ram assisted to hold them to the surface and to fold them

back when not in use.• Low ground pressure and low centre of gravity to prevent surface damage.• 1m folded width for ease of access and storage.• OPC controls for safe, easy handling and accurate control.• Simple to drive and easy to maintain.• Fast operation encourages regular use.• Fold-over seat has suspension springing and carrying box below.• ROBBI is supplied as standard with one set soft bristles and 1 set medium

bristles.

Option

LPG gas conversion option.

• Unique continuous belt system.• 3 widths of belt available for different sports.• Belts are interchanged very quickly without tools.• Line of the belt gives a positive guide for steering.• Curves can be marked with ease.• Applies most types of marking liquid.• Most areas can be marked in one pass.• Wide pneumatic tyres improve performance in adverse conditions.• Dismantled in seconds for easy and thorough cleaning.• Supplied with 100mm belt.

• Over-riding action on slight hollows allows level areas to be firmly rolled, whilst low areas are left, so that the playing surface is progressively levelled.

• Outer rollers can be raised concentrating the whole weight on the centre cylinder if desired.

• Additional weights can be added if required, to increase weight to approx. 150kg (328lbs).

• Runs without effort on self-lubricating bearings.• Can be pushed or pulled with ease.

• Specially designed for maintaining synthetic surfaces.• Ride-on for manoeuvrability and operator convenience.• Electric start.• Hydrostatic drive for forward/reverse.• Oscillating brushes for thorough, periodic brushing.• Rear mounted brushes for routine, frequent use.• Outer brushes fold for transport and storage.• Causes less compaction than conventional drag brushes.• Rear ball hitch for towing.

Option

LPG gas conversion option.


6hp ride-on brush system, includes ROB/8 FS08322 sets of brushes (soft & medium)


Liquid line marker with 100mm belt LM/234 FS0117

Spare marker belts50mm wide marker belt D5058

75mm wide marker belt D5061

100mm wide marker belt D5065


120kg bowling green roller HRT FS0801

Additional weights (set of 2) F31936Description Code Order ref

11.5hp ride-on brush system for FS1116artificial turf

Sports Fields

Sports Fields

Amenity

Amenity

Amenity

Amenity

Synthetic

Synthetic

Sport

Hand Operated Equipment

Hand Operated Equipment

25 FULL SPECIFICATION AVAILABLE ON www.sisis.com

Aerdrain Fork

Trulute

Combirake

Drag Mat

Bray Hand Tools

Drag Brush

A simple but effective tool for year round use.

Reversible levelling grid for many uses on turf surfaces.

Simple to use, dual purpose implement for use on small fine turf areas.

Useful hand tool on small areas for rubbing in dressings, routine surface renovation on hard porous pitches, etc.

Ideal for overseeding and aerating small areas on bowling greens, tennis courts, golf greens, tees and ornamental lawns.

Basic hand tool for natural and synthetic turf and hard porous surfaces.

• 4 kinds of tines

• The two sides of the TRULUTE have completely different profiles: - one side has smooth edges for spreading top dressings and levelling. - one side has sharp edges for working-in top dressings, cutting back high spots etc.

• Dual purpose.• Downward pressure is applied by gentle pressure on the handles.• Virtually maintenance free.• Rake wires and brush can be replaced when worn.• Rake and brush can be lifted clear of the ground for transport.

• Equally effective on natural and synthetic turf, and hard porous areas.• Can also be drawn behind a tractor, or in conjunction with a top-dresser.

• Interchangeable heads between slotter and spiker.• 50% saving of grass seed when overseeding using slotter.• Rapid germination and stronger growth.• No loss of play and no top dressing required.• Simple to store and maintain.• Working width 250mm (10”).

• Heavy duty drag brush is for use on sand filled synthetics and hard porous surfaces, and for brushing in top dressing.


Turf aerating fork excluding tines FC FS1144

127mm long solid tines (set of 5) S D1534

127mm long hollow tines (set of 3) H D1535


60cm wide levelling & dressing tool TL/24 FS0302


Combined rake & brush unit CMB/1 FS0932


1.3m wide x 1m deep hand pull drag mat HDM/54 FS1036*


Bray hand seed slotter BS002

Bray hand seed spiker BS004

Additional spiker reel BS003

Additional slotter reel BS005


1.8m heavy duty hand drag brush DB/6H FS1166

Dragmat

DragmatTowed Dragmat.• Working width of 270cm (9ft).


2.7m wide x 1.2m long towed dragmat HDM/108 FS1037

Sports Fields Golf Amenity

24 FULL SPECIFICATION AVAILABLE ON www.sisis.com

We keep good company

SISIS supports industry associations through corporate membership, which include:

Visit sisis.com for further information

Telephone 01274 565131www.stri.co.uk

Telephone 01908 312511www.iog.org

Telephone 01347 833 800www.bigga.co.uk


Built with Experience

Associations

Dennis is synonymous with ornamental, summer and winter sports surfaces, designing and manufacturing high quality pedestrian grounds maintenance equipment, meeting the needs of groundsmen, greenkeepers and gardeners for over 80 years.

Part of the Howardson group alongside SISIS, the two product portfolios offer a truly comprehensive range of British manufactured products, built and designed with a vital ingredient: EXPERIENCE.

Our reputation is built not only on the quality of our products but also on the high level of customer and technical support provided by our experienced field and office based teams and our professional dealership network.

To find out more about the Dennis range of products or to request a catalogue telephone +44 (0)1332 824777 or visit www.dennisuk.com.

26

SISIS - Division of Howardson Ltd.

Howardson Works, Ashbourne Road, Kirk Langley, Derby DE6 4NJTel: +44 (0)1332 824777 Fax: +44 (0)1332 824525 E-mail: [email protected]

www.sisis.com

www.dennisuk.comwww.sisis.com

Due to a policy of continual development Sisis reserves the right to change specification without prior notification. All goods sold subject to the company’s terms and conditions of sale, copies available on request. E&EO.


sisis brochure_0811_export

Documents

tractor mounted aerators

tractor mounted brushes

deep slitters tractor

tractor mounted scarifiers

tractor mounted sweepers

powered aerators

minimum surface disturbance

low maintenance