This is a 4.30 Triple Pack that contains : Rogero CEX-4.30 v1.00 + multiMAN ver 04.08.01 + Showtime 04.01.208

Link ------> Rogero_CEX4.30_V1.00 Full Pack ( Clicked 29206 times ) Mirror ----> Rogero_CEX4.30_V1.00 Full Pack ( Clicked 19292 times )

Update --> multiMAN Add-ons for CFW4.30- bdRESET lastGAME gameDATA ( Clicked 2964 times )

------------> Rogero CEX-4.30 v1.00 PS Home Workaround/Fix by TechnoDon ( Clicked 7874 times )

PUP MD5: 7ADF524594D46EF669F4C64E07462631 ---> This is the MD5 of the current patched PUP.

PUP Size : 192 MB (201,449,227 bytes)

This is the MD5 of the initial un-patched release (Links removed, MD5 kept just in case anyone have the initial PUP with the "PS3~dev_blind.zip" patch and needs to confirm the MD5)MD5: 7ef38c26482465b939a8ab5e960f165c

This CFW was tested on most PS3 Models by different testers and no problems were encountered.But as any CFW release you must install it with caution and by following proper instructions, No one will be held responsible for any damage caused.

* For details about Updating from CFW3.55/4.21 to CFW4.30 Please read the Update Guide below

* For details about Downgrading back to CFW/OFW3.55 Please read the Downgrade Guide below

* For details about Recovering from a Brick please check this thread --> Brick-Recovery Procedure.

Rogero CEX-4.30 v1.00 Details - Compatibility problem with some PS3 models is now fully fixed.- XMB Icons problem from in-game PS button is now fixed.- PSN/SEN access is available as long as the current "passphrase" still the same.- Loading games from App_home Icon is now fixed.- noBD and noBT patches are applied to allow installation onconsoles with broken BR drive or Bluetooth controller.- It was tested by hundreds of testers on all PS3 models (FAT & Slim) and no problems were encountered.- It can run games signed with Keys up to version 4.30 without any Eboot/Sprx patching needed- Games can be loaded from Disc Icon (with Original game in BD) and from app_home (Disc-less, but not all games).- Current 3.55 homebrew applications can't be loaded on thisCFW, applications must be re-signed properly for FW4.21/4.30

ATTENTION:

1- This CFW doesn't have LV1 checks disabled and can't be installed on Downgraded PS3 consoles unless you have Dehashed/Reset Syscon Properly (if you're not sure about your PS3, Dehash it anyway to avoid any risk) Link ----> Dehashing Tutorial

2- Always make a NOR/Nand dump using multiMAN or memdump before installing any CFW to have a recovery backup in case of any bricks.Having a valid NOR/Nand dump is an essential step before upgrading, because you will always have a way to recover (using hardware flashers) when you have a valid dump.** A Hardware Flasher alone without a valid dump may not fixyour bricked PS3 **

3- The QA flag must be always Enabled on your PS3 for safer upgrading/downgrading operations. Link ----> toggle_qa.pkg

4- Always use the Recovery Menu while installing this CFW toavoid possible bricks (XMB update works, but Recovery Menu is safer).

6- Please Check the MD5 of the downloaded PUP file before installing any CFW to avoid possible bricks.

7- DO NOT HAVE DISC IN PS3 WHEN UPDATING FIRMWARES..As the PS3 will take the UPDATE from the DISC First.

8- You need to already be on 3.55 to install this. Installing from any firmware other than 3.55 will simply notwork

- Downgrading back to 3.55 is always possible using the following steps :- Download the Downgrader PUP ---> Downgrader PUP mirror ---> Downgrader PUP Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db- Rename the downloaded file to "PS3UPDAT.PUP" and put it onyour USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP"- While on Rogero CFW4.30, go to System Update from XMB and install the Downgrader PUP.- After the Downgrader PUP installs you'll be on a hybrid CFW3.55 that will still shows ver4.21/4.30 from system settings.- Enable QA flag by following these steps:

1- Download the Rebug QA_Toggle package from here ---> toggle_qa.pkg2- Put the "toggle_qa.pkg" on USB and Install it on the PS3.3- Run the "Rebug Toggle QA" from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear 2 or 3 Beeps and the PS3 will Restart back to XMB.4- If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time):

L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_downYou should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.

- Now put "Rogero CEX-3.55 CFW V3.7" on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP" ---> Rogero CEX-3.55 CFW V3.7.PUP- Start the PS3 into Recovery Menu and install "Rogero CEX-3.55 CFW V3.7" (from Recovery Menu, this is important)- Once you're back on Rogero CFW3.55 v3.7 Start the PS3 intoRecovery Menu and install any CFW 3.55/4.21/4.30.

Useful Hint ( for Slims / FATs with NOR Flash only ): you can simply use CondorStrike's Updater package from XMB to enter Recovery Menu directly from XMB without going through several restart/shutdown sequences. --> Condor Updater v2.0

- Updating from CFW3.55/4.21 to the CFW4.30 v1.00 should be done using the following steps :1- Proper Way ( CFW4.21 --> CFW3.55 --> CFW4.30 )---- Downgrade back to Rogero CEX3.55 v3.7 using the guide above.---- Once on Rogero CEX3.55 v3.7, start the PS3 into Recovery Menu and Instal (original) OFW3.55.       ( This step may not be needed for all consoles but better do it )---- Once on (original) OFW3.55, start the PS3 into RecoveryMenu again and update into CFW4.30 v1.00.

2- Alternative Way ( CFW4.21 --> Recovery Menu --> CFW4.30 )---- You can try updating from CFW4.21 to CFW4.30 v1.00 fromRecovery Mode.---- If it didn't work, then you'll have to use the first Proper Way ( CFW4.21 --> CFW3.55 --> CFW4.30 )

- Changing/Upgrading the HDD while on Rogero CFW4.30 should be done using the following steps :- Download the Downgrader PUP ---> Downgrader PUP mirror ---

> Downgrader PUP Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db- Rename the downloaded file to "PS3UPDAT.PUP" and put it onyour USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP"- Swap the current HDD with the New HDD, Turn the PS3 on, follow screen instructions and let it install the DowngraderCFW.- After the Downgrader CFW installs you'll be on a hybrid CFW3.55 that will still shows ver4.21 from system settings.- Enable QA flag by following these steps:

1- Download the Rebug QA_Toggle package from here ---> toggle_qa.pkg2- Put the "toggle_qa.pkg" on USB and Install it on the PS3.3- Run the "Rebug Toggle QA" from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear 2 or 3 Beeps and the PS3 will Restart back to XMB.4- If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time):

L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down

You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.

- Now put "Rogero CEX-3.55 CFW V3.7" on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP" ---> Rogero CEX-3.55 CFW V3.7.PUP- Start the PS3 into Recovery Menu and install "Rogero CEX-3.55 CFW V3.7" (from Recovery Menu, this is important)- Once you're back on Rogero CFW3.55 v3.7 Start the PS3 intoRecovery Menu and install any CFW 3.55/4.21/4.30.

Useful Hint: you can simply use CondorStrike's Updater package from XMB to enter Recovery Menu directly from XMB without going through several restart/shutdown sequences. --> Condor Updater v2.0

Credits to :- PS3DevWiki for the valuable and always up-to-date source of information.- Deank for his continuous efforts on Multiman and many other PS3 tools/fixes.- Tortuga-cove staff for the support forum.- Andoma for his work on his excellent Showtime Media Player.- All the Beta-Testers and all Tortuga-Cove members for their support and patience.It is not the years in your life that count. It is the life in your years.

Rogero Developer Posts: 264Joined: Mon Jul 04, 2011 4:07 pmHas thanked: 43 timesBeen thanked: 334 timesReputation point: 503

TopRe: Rogero CEX-4.30 v1.00 / multiMAN ver 04.08.01 / Showtime04.01.208by S4BRE » Sun Oct 28, 2012 9:47 pm

thanks man!

Tortuga Cove Administrator

S4BRE Site Admin

 Posts: 1164Joined: Thu Jun 30, 2011 8:27 amHas thanked: 54 timesBeen thanked: 47 timesReputation point: 138

TopRe: Rogero CEX-4.30 v1.00 / multiMAN ver 04.08.01 / Showtime04.01.208by BobbyBlunt » Sun Oct 28, 2012 9:50 pm

Awesome. Thanks for everything you have done in both the PS3and 360 communities

BobbyBlunt Moderator

 Posts: 46Joined: Fri Apr 06, 2012 3:17 amHas thanked: 4 timesBeen thanked: 9 timesReputation point: 15

TopRe: Rogero CEX-4.30 v1.00 / multiMAN ver 04.08.01 / Showtime04.01.208by william5k » Sun Oct 28, 2012 9:51 pm

thank you very much

william5k Member

 Posts: 4Joined: Wed Aug 15, 2012 5:26 amHas thanked: 0 timeBeen thanked: 0 timeReputation point: 0

TopRe: Rogero CEX-4.30 v1.00 / multiMAN ver 04.08.01 / Showtime04.01.208by realth » Sun Oct 28, 2012 9:52 pm

Thankyou very much Rogero - peoples hero

Extra mirror here, to help with the main load on yours

http://uploaded.net/file/hr87ge6yLast edited by realth on Sun Oct 28, 2012 9:58 pm, edited 1 time in total.

realth Member

 Posts: 30Joined: Fri Oct 26, 2012 3:14 pmHas thanked: 9 timesBeen thanked: 12 timesReputation point: 4

TopRe: Rogero CEX-4.30 v1.00 / multiMAN ver 04.08.01 / Showtime04.01.208by goosezit » Sun Oct 28, 2012 9:54 pm

thanks, and i'm looking forward for some reply's about CECHL04. i can't test it cause i don't have a flasher.

goosezit Member

 Posts: 8Joined: Sun Oct 28, 2012 6:24 pmHas thanked: 29 timesBeen thanked: 6 timesReputation point: 0

TopRe: RogeReputation point: 7

Top

Re: Rogero CEX-4.30 v1.00 / multiMAN ver 04.08.01 / Showtime04.01.208by whocaresit » Sun Oct 28, 2012 9:58 pm

Thank you for v4.30! That was fast!

ANY BRICKS YET (newly introduced bugs?)-- PS3 SLIM CECH-2501A? I'm on 4.21 v1.09D and it's working quite well for me. No flasher. Haven't tried this one yet.Last edited by whocaresit on Sun Oct 28, 2012 10:05 pm, edited 1 time in total.

whocaresit Member

 Posts: 9Joined: Fri Oct 26, 2012 8:50 pmHas thanked: 0 timeBeen thanked: 0 timeReputation point: 0

Top

Re: Rogero CEX-4.30 v1.00 / multiMAN ver 04.08.01 / Showtime04.01.208by xfighter11 » Sun Oct 28, 2012 10:01 pm

Many THX Rogero, you are a hero. Nothing more to say!

Will try now!

xfighter11

Member

 Posts: 12Joined: Fri Oct 26, 2012 5:58 pmHas thanked: 0 timeBeen thanked: 0 timeReputation point: 0

Top

Re: Rogero CEX-4.30 v1.00 / multiMAN ver 04.08.01 / Showtime04.01.208by windrider » Sun Oct 28, 2012 10:03 pm

GUYS KEEP ON TOPIC.

POST RESULTSIf we all are here to help others , then what exactly are others here for?

http://tortuga-cove.com/irc-chat

windrider Moderator

 Posts: 794Joined: Mon Jul 18, 2011 12:11 amLocation: AlbertaHas thanked: 154 timesBeen thanked: 67 timesReputation point: 242

Top

Top of FormNext Display posts from previous: Sort by Bottom of Form

Post a reply1081 posts • Page 1 of 109 • 12 3 4 5 ... 109 Return to RogeroTop of FormJump to: Bottom of FormWho is onlineUsers browsing this forum: aitlbach, Google Feedfetcher, ibrudiiv, kimo98, MaTo77, mikele13, pulido72, senas8, vrolokand 76 guestsThe team • Delete all board cookies • All times are UTC