lyn_distributing_literature_2012b.pdf - lyn distributing

27 Acid cleaners, Bowl cleaners, Drain Openers, Concrete Truck Cleaners, Truck Trailer Cleaners

28-80 Aerosols, Battery cleaner, Battery Coater, Anti-Seize, Silicone, Penetrating Oil, Brake Cleaners, All Purpose Cleaner, Safety Solvent, Wasp Spray, Glass Cleaner

81-82 Infectious Waste Bags Red, Infectious Linen Bags Yellow, Recycle Bags Blue, Trash Bags, 2 mil, 1.3mil, 1 mil, .5 mil 3 mil, 4 mil, 6 mil

83-92 Brooms, Push Brooms, Street Brooms, Floor Squeegees, Scrapers, Wash Brushes, Handles, Hand Scrub Brushes.

93-100 Color Coded Brushes, Color Coded Brooms, Color Coded Squeegees, Color Coded Handles, Tank Brushes

101-136 Degreasers, Citrus Degreasers, Citrus Tar Remover,

Citrus Drain Cleaner, Vandal Mark Remover, Paint Stripper, Tar and Asphalt Remover, Electrical Solvents, Parts Washing Solvents, Soy Degreasers, Brake Cleaner.

137-150 Disinfectants Sanitizers, Conquer, Patrol, T-chlor, DQ-10, Spray Fresh

151-154 Paper Product Dispensers, Roll Towels, Folded Towels, Center Pull Towels

155-162 Hand Soap Dispensers, Hand Cleaner Dispensers

163-167 Foggers For Insecticides

168-174 Gear Lube, Grease

174-201 Hand Sanitizers, Lotion Hand Soap, Gym Body Soap, Waterless Hand Cleaner, E-2 Hand Soap, Foamy Hand Soaps

203-211 Absorbent Pads, Absorbent Pillows, Booms, Socks, Rolls, White Pads, Blue Pads, Yellow Pads, Grey Pads.

212-218

Containment Pallets, Containment Mat Drain Protectors, Containment Kits,

219 High Density Bags, 6 mic, 8 mic, 12 mic, 16 mic, 22 mic. Clear, Black

220-232 Laundry Soaps, Bleach, Fabric Softener, Dry Bleach, Color Safe Bleach,

233-254 Misc. Liquids, Digester, Drain Mate, Mud & Silt Remover, Weather Guard, Asphalt Release Agent, Wash Bay Pit Deodorizer, Anti-Static, Power Plunger Drain Opener, Alkaline Coil Cleaner

255-259 Mops, Wet Mops, Dust Mops, Handles, Frames, Carpet Bonnets,

260-262 Buffing pads, Hand Pads, Steel Wool Pads, Stainless Steel Scrubber, Pad holders, Lambs Wool Pads, Sand Screens

263-266 Gallons of Paint, Aerosol Paints, Line Marking Paints.

267-270

Paper Products, Tissue, Roll Towels, Multifold Towels, Blue Windshield Towels, C-Fold Towels

271-278 Polish, Auto Dash Shine, Prism Foaming Wax, Red Sheater Rinse & Wax, Stainless Steel Polish,

279-298 Activate Drain Opener, Powdered Floor Soaps, Powdered Car Wash, Ice Melters, Absorbent Powder, Powdered Steam Soap, Hot Tank Cleaner, Aluminum Low Foam Hot Tank

299-321 Hydro Proportioners Push Button dispenser, Drain Pump Dispenser, Drum Top Dispenser, Hydrofoamer Hydrosprayer Sink Master

322-325 Safety Glasses, Ear Plugs,

326-340 Disposable Gloves, Nitrile, Latex, Vinyl, Poly, Safety Vests, Face Shields, PVC Boots,

1

1

Aprons, Dust Masks, Rain Suits, Disposable Coveralls, Gloves, Sting Knit Latex Coated, Nitrile Dipped Gloves, Jersey Gloves, Hair Nets

341-348 Rodent Control, Bait Stations, Baits, Traps, Glue Boards, Animal Traps

349-412 Soaps, Liquid Floor Soaps, Equipment Cleaning Detergents, Pressure Washer Soaps, Steam Cleaning Soaps, Car Wash Soaps, Drive Thru Car Wash Soaps, Mining Degreasers, Windshield Cleaners, Freezer Floor Cleaners, Special Soaps

413-423 Sprayers, Foamers, Gilmour Foamers, HydroFoamers, HydroSprayes, Parts For Hydrofoamers and Sprayers, Trigger Sprayers, Spray Bottles, 2 Quart Hand pressure sprayers, Sure Shot Sprayers

424-430 Ware Washing Detergents, Rinse Aids, Test Papers For Water Testing and pH testing, Chlorine, Quat, and Iodine Testing, Water Hardness Testing.

431-433 Hard Water Descaler, Hard Water Remover

434-445 Floor Wax, Floor Finish, Wax Stripper, Shine Restorer, Low Odor Wax Stripper, Neutral Floor Cleaners

446-458 Insect repellent, Insecticides, Weed Killers, Herbicides, Wetting Agents, Ground Maintenance Products

459-467 Drum Pumps, Tank Pumps, Drum Wrenches, Drum Funnels

468-542 Continental Manufacturing Mop Equipment, Dust Pans, Trash Cans, Dust Mops, Brooms,

2

2

ALUMINUM BRIGHTENERCONCENTRATED

*Brightens Aluminum *Removes oxides, Road film, and Diesel Smoke *Highly Concentrated- Economical *Works Quickly-

Requires No Heavy Scrubbing or Polishing A highly concentrated blend of detergents and inorganic acids formulated for the removal of oxides, scum, road film, and diesel smoke deposits from aluminum truck bodies and trailers. Directions for use: To avoid corrosion, mix solution in a plastic pail or other suitable container. Dilute concentrate with 50 - 100 parts of water to one part A.B.C. concentrate. Apply solution to surface to be cleaned with brush or sprayer, working in small sections from the bottom upward to avoid streaking. Allow solution to remain on surface for 3 to 5 minutes. Do not allow surface to dry out during application. Agitate surface with a long handle brush to remove heavy soils, Then rinse with clear water. Avoid contact with glass or porcelain surfaces as product will etch. If contact should occur, rinse immediately with water. Caution: Keep out of the reach of children. Product contains inorganic acids, avoids contact with eyes, skin or clothing. It is advisable to wear protective clothing during application procedure. If eyes or skin are effected, flush area with copious amounts of magnesia or water beaten with egg whites. Contact physician. Keep container sealed when not in use. Rinse empty container before disposal in authorized landfill site. LYN DISTRIBUTING 965 NORTH REDWOOD ROAD NO. SALT LAKE, UT 84054 PHONE 801-295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

3

3

ALUMINUM CLEANER & BRIGHTENER.

VERY CONCENTRATED

*Brightens Aluminum *Removes oxides, Road film, and Diesel Smoke *Highly Concentrated- Economical *Works Quickly- Requires No Heavy

Scrubbing or Polishing *Contains No Hydrofloric Acid A highly concentrated blend of detergents and inorganic acids formulated for the removal of oxides, scum, road film, and diesel smoke deposits from aluminum truck bodies and trailers. Directions for use: To avoid corrosion, mix solution in a plastic pail or other suitable container. Dilute concentrate with 50 - 100 parts of water to one part ALUMINUM CLEANER concentrate. For non-polished areas to be cleaned with Aluminum Cleaner Concentrate dilute concentrate with 5-50 parts water for heavy duty cleaning. Apply solution to surface to be cleaned with brush or sprayer, working in small sections from the bottom upward to avoid streaking. Allow solution to remain on surface for 3 to 5 minutes. Do not allow surface to dry out during application. Agitate surface with a long handle brush to remove heavy soils, rinse with clear water. Avoid contact with glass or porcelain surfaces as product will etch. If contact should occur, rinse immediately with water. Caution: Keep out of the reach of children. Product contains inorganic acids, avoids contact with eyes, skin or clothing. It is advisable to wear protective clothing during application procedure. If eyes or skin are effected, flush area with copious amounts of magnesia or water beaten with egg whites. Contact physician. Keep container sealed when not in use. Rinse empty container before disposal in authorized landfill site.

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD NO. SALT LAKE, UT. PHONE 801-295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022 WEB SITE WWW.LYNDIST.COM : EMAIL FOR INFORMATION [email protected]

4

4

http://www.lyndist.com

mailto:[email protected]

BRUTE PORCELAIN & TILE CLEANER

• Removes: Scale, Soap Scum, Water Spots, Mineral Deposits, Grease and Oil • Safe to Use • Nonfuming • Green Mint Fragrance

LYN DISTRIBUTING 965 North Redwood Road North Salt Lake, UT 84054 (801) 295-5022 WATS (800)366-5022 FAX (801)295-5044 E-mail : [email protected] WWW http://www.lyndist.com/

Hotels, motels, locker rooms, health spas, nursing homes, hospitals, municipal buildings, jails, apartments, and schools.

Contains mild acid, wetting agents and solvents to remove scale from ceramic tile, brick, glass, shower stalls, etc. REMOVES: Soap scum, water spots, mineral deposits, grease and oil. BRIGHTENS: Stainless steel and chrome. CLEANS: Toilet bowls, urinals, ceramic and porcelain tile, tubs and sinks. This clear, pink, pleasantly scented, non-viscous food grade acid detergent is formulated for the cleaning and maintenance of toilet bowls, urinals, wash basins, porcelain and ceramic tile, sinks, shower stalls, chrome faucets and fixtures, glass shower doors, stainless steel bath tubs, and water fountain basins. Use of this product will clean and remove water spots and mineral deposits, rust, grease and oil, and soap scum from bathroom surfaces safely and effectively. Will not harm paint. Very safe to use. Non-fuming. Ready to use.

Apply product at appropriate dilution concentration with a hand trigger sprayer, sponge, cloth or bowl swab or brush. Allow surface to remain wet for 2 to 3 minutes, then agitate surface with brush, swab or sponge. Rinse thoroughly and wipe dry to restore luster and to minimize water spotting.

Description

Areas of Use

Directions

5

5

Application: To clean and disinfect both toilet bowls and urinals - first remove standing water by forcing it upand over the trap area with swab mop. Wring excess water out of the swab mop and saturate with bowlcleaner. Start the cleaning operation under the rim of the commode or top rim of the urinal using the side ofthe applicator. Force the bowl cleaner up and in to the water outlet holes allowing the product to run down thesides of the bowl or urinal. This will allow the full strength product to come into direct contact with the areasmost likely to have the worst build up of organic soils. Proper disinfection requires a thorough cleaning of thetrap area as well as the bowl. If you have done a proper job of forcing all the standing water out, you shouldhave no trouble swabbing the trap and bowl without the product becoming diluted. Allow this product toremain for at least 10 minutes until all rust, scale and deposits are loosened. Rinse by flushing. Use agermicidal cleaner for the seat and outside areas - do not use this product on any surface outside the commodeor urinal.

FirstAid: External-Eyes:wash with water for 15 minutes. Get prompt medical attention. Skin: wipe acidgently off the affected area and immediately flood the surface with water. Use soap freely, then cover withmoist magnesia or baking soda.Keep out of reach of children. For industrial and institutional use only by trained personnel.

DANGER - POISON: May be fatal or harmful if swallowed. Do not breathe vapor or fumes. Produceschemical burns. Do not get in eyes, on skin, or on clothing

First Aid: Internal - Call a physician immediately. Drink a teaspoon or more of magnesia, chalk or smallamounts of water-softened soap in milk or raw egg white.

Authorized by the USDA for use on federally inspected meat and poultry plants. Classification C-2 for use intoilets and / or dressing rooms. Registered with the Environmental Protection Agency

LYN DISTRIBUTING 965 No. Redwood Road North Salt Lake, Utah 84054Phone Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

Technical DataColor ...................... Milky White emulsionFragrance............................. CharacteristicpH......................................... Less than 1.0Density ........................................ 9.6#/gal.Acid content ................... 20.0% min. HCLStability ..............................2 yr. minimumDetergency.................................. ExcellentViscosity.........................................1 0 cpsRust removal............................... ExcellentFlash point …………………………..None

CONCENTRATEDCONCENTRATEDGERMICIDAL BOWLGERMICIDAL BOWL

CLEANERCLEANER

ACTIVE INGREDIENTS:Hydrogen chloride..............................................……….20.00%n-Alkyl dimethyl ethylbenzyl ammonium chloride..…....0.75%Alkyl (C l 4, 50%; C l 2, 40%; C l 6, 1 0%)dimethyl benzyl ammonium chloride…………………... 0.75%

6

6

Concentrated Lime and Scale Solvent

• Safe to use on all metal • Removes Hard Water and Soap

Deposits • Economical to Use • Fast Acting • Thick or Regular

This product has been designed especially to meet the problem caused by the build up of hard water deposits and soap film. Excellent for cleaning and brightening on stainless steel, aluminum food utensils and chrome fixtures, steam cookers, coffee makers, steam tables, dishwashing machines, ice machines, sinks, and glassware (windows & mirrors).

CLASS is U.S.D.A. approved for use in all areas on all surfaces. This product may be used on floors to help to make floors slip resistant and deep clean. Use in banana rooms to clean hard water and algae off walls and equipment. Use in wet box areas to deep clean and brighten floor, use on showcase mirrors to remove hard water or on store windows for hard water removal. Ask for the thickened CLASS for cleaning vertical surfaces.

DIRECTIONS FOR USE ON STEAM TABLES : 1. Fill steam table with water. 2. Add 8 ounces of CLASS for each gallon of water used. 3. Heat solution to 200°F and let stand for 30 minutes to one hour. 4. Drain and rinse thoroughly with clear water. 5. Tables with excessive build up may require a second cleaning.

DIRECTIONS FOR USE ON DISHWASHING AND ICE MACHINES: 1. Spray entire machine inside and out. Let stand until build-up dissolves. 2. Rinse thoroughly with clear water.

DIRECTIONS FOR USE ON WINDOWS AND MIRRORS: 1. Spray CLASS on wet or dry surface with high volume trigger sprayer (Q3333-35-10). Spray hard water

areas, let sit for 5 to 10 minutes then brush lightly. Works best on dry surface. 2. Rinse with clear water, let window or mirror dry. For extreme buildup repeat step 1.

CAUTION: This product is acidic. Contact with skin and eyes should be avoided. Skin – Wash thoroughly with soap and water. Eyes- Flood with clear water for 15 minutes. Consult a physician. If swallowed consult a physician.

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD, NORTH SALT LAKE, Utah 84054 Phone in Salt Lake Area 295-5022 www.lyndist.com Outside Salt Lake Area 1-800-366-5022

7

7


This acid coil cleaner removes dust, dirt, grime, grease and oxidation from aluminum or copper coils and fins of cooling units and air conditioners. Use it regularly to clean the coils for more efficient operation and lower power consumption. Coil Brite is a quick acting, high foaming, blend of acid detergents for the brightening and cleaning of aluminum condenser coils and fins. It produces fast wetting action for deep penetration of stubborn dirt. It is free rinsing while coils are condensing. If coils remain dry, flush off with water.

Coil-Brite should be diluted with five parts water before application. Do not allow Coil-Brite to dry on coils or condenser. Avoid contact with glass or porcelain surfaces as etching will occur. DIRECTIONS:

Apply only when unit is not running. Spray or brush onto coils and allow to penetrate for 3 to 5 minutes. Flush coils thoroughly with clean water. Appropriate safety clothing, glasses or face shield should be used for protection of eyes, skin, and clothing. Avoid breathing spray mist. Avoid contact with skin as this product will burn skin. We recommend using this type product no more than 2 to 3 times per year. Alkaline coil cleaners (ACC-101) may used as often as needed during the year, but this product is very strong and doesn’t need to be used more than 3 times per year. If more frequent cleaning with this product is desired during the year then dilute Coil-Brite 1 part concentrate to 10 parts water. Do not use this cleaner around food or on food contact surfaces. CAUTIONS Harmful or fatal if swallowed. Contains Hydrofloric Acid. Use rubber gloves and goggles when applying. Avoid contact with eyes, skin, or clothing. Do not mix this compound with other chemicals. KEEP OUT OF REACH OF CHILDREN. LYN DISTRIBUTING 965 North Redwood Road North Salt Lake, UT 84054Phone In Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

8

8

CONTREAT

• Acid Base • Non-Fuming • Descaling Detergent • Concentrated


Excellent product for an industrial maintenance shop, concrete, masonry or tile suppliers, contractors, and transporters and more.

An acid used to clean bricks and mortar. Descales: removes lime and waterscale. Non-fuming. May be used diluted with water for lighter soil conditions, or for concrete etching. A rapidly effective, low-odor, non-fuming, high sudsing acid base detergent for a variety of cleaning and descaling operations. This concentrated product may be used undiluted for severe encrustation of scale, mineral deposits, alkaline matter, or diluted with water for economical removal of hard water formations, soap scum, corrosion, lime build-up, or mortar spatters. This unique formulation combines chemical strength of blended acids with the emulsification properties of high sudsing synthetic detergents. Cleans debris from brick and masonry surfaces, ceramic tile, mortar stone, and metallic surfaces other than aluminum or magnesium. This product is ideal for cleaning, degreasing, and providing a light etch to concrete floors. Water conditioners assist in film-free rinsing of cleaned surface. Dilutes from ready to use to 1 : 3 with water depending on application.

For severe soil conditions, dilute product with equal parts of water. Light soil accumulations may be removed with a dilution of one part product to 3 parts water. Adjust dilution to most appropriate concentration. Apply to surface by mopping, spraying, brushing, or by immersion in solution. Allow surface to remain wet with solution for at least 5 minutes. Agitate if required for more even distribution of product. Rinse thoroughly with clear water and allow to dry. Repeat application procedure if necessary.

Description

Areas of Use

Directions

9

9

CONCRETE REMOVER & MASONARY CLEANER

PRODUCT DESCRIPTION: A clear red liquid, non-fuming acid detergent compound for removal of concrete, plaster, rust, scale, grease, oil, and road film. WHERE CONCRETE CLEANER (C.R.M.C. -83 ) CAN BE USED:

For cleaning concrete mixer trucks, cement, brick, floors, forms, windows, door frames, tools, and other cement handling equipment.

ADVANTAGES OF ( C.R.M.C. - 83 ) CONCRETE CLEANER: Harmless to paint, rubber, windshields, and ordinary glass. Removes and cleans a wide range of deposits and soils quickly. Can be diluted for economical use 1 part CRMC-83 Concentrate to 2-3 parts water. Reduced hazard to user and surfaces. Contains a combination of acids, detergents, wetting and penetrating agents. Contains a odor control agent to reduce fumes. C.R.M.C.-83 is inhibited against attacking most metals and paint when used in diluted form. HOW TO USE:

Using the proper dilution, apply by spraying or brushing. Allow surface to remain wet four to five minutes, while agitating with a brush. Rinse thoroughly with clear water, allow to dry.

PROSPECTIVE USERS:

Concrete mixers, cement contractors, and other accounts having accumulations of cement, plaster, rust, scale, grease, oil, and road film to be removed from equipment. DEMONSTRATION: Mix a solution of 1 part Concrete Cleaner with 2-3 parts water (heavy duty solution) in a plastic spray bottle. Apply to cement deposit on equipment or floors, or on greasy concrete floor. Allow to stand 4 to 5 minutes, brush scrub and rinse. NOTE: A reasonable days accumulation of concrete will be readily removed, however a long-time accumulation will require repeated applications. PRECAUTIONS:

DANGER ! Keep out of the reach of children. Maybe fatal if swallowed. Cause burns. Avoid contact with eyes and skin. In case of contact, immediately flush with plenty of water. Wash skin with soap and water. Use with adequate ventilation. Do not breath fumes.

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE, UT. 84054PHONE: SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 800-366-5022

10

10

CONCRETE REMOVER & MASONARY CLEANER

PRODUCT DESCRIPTION: A clear red liquid, non-fuming acid detergent compound for removal of concrete, plaster, rust, scale, grease, oil, and road film. WHERE CONCRETE CLEANER (C.R.M.C. -83 RTU ) CAN BE USED:

For cleaning concrete mixer trucks, cement, brick, floors, forms, windows, door frames, tools, and other cement handling equipment.

ADVANTAGES OF ( C.R.M.C. - 83 RTU) CONCRETE CLEANER: Harmless to paint, rubber, windshields, and ordinary glass. Removes and cleans a wide range of deposits and soils quickly. Can be diluted for economical use. Reduced hazard to user and surfaces. Contains a combination of acids, detergents, wetting and penetrating agents. Contains a odor control agent to reduce fumes. C.R.M.C.-83 is inhibited against attacking most metals and paint when used in diluted form. HOW TO USE:

Using the proper dilution, apply by spraying or brushing. Allow surface to remain wet four to five minutes, while agitating with a brush. Rinse thoroughly with clear water, allow to dry.

PROSPECTIVE USERS:

Concrete mixers, cement contractors, and other accounts having accumulations of cement, plaster, rust, scale, grease, oil, and road film to be removed from equipment. DEMONSTRATION: Use as is in a plastic spray bottle. Apply to cement deposit on equipment or floors, or on greasy concrete floor. Allow to stand 4 to 5 minutes, brush scrub and rinse. NOTE: A reasonable days accumulation of concrete will be readily removed, however a long-time accumulation will require repeated applications. PRECAUTIONS:

DANGER ! Keep out of the reach of children. Maybe fatal if swallowed. Cause burns. Avoid contact with eyes and skin. In case of contact, immediately flush with plenty of water. Wash skin with soap and water. Use with adequate ventilation. Do not breath fumes.


11

11

FOAMY CONCRETE REMOVER& MASONARY CLEANER

PRODUCT DESCRIPTION: A clear red liquid, non-fuming acid detergent compound for removal ofconcrete, plaster, rust, scale, grease, oil, and road film.

WHERE CONCRETE CLEANER (D-7) CAN BE USED:For cleaning concrete mixer trucks, cement, brick, floors, forms, windows, door frames, tools, and other

cement handling equipment.

ADVANTAGES OF (D-7) CONCRETE CLEANER: Harmless to paint, rubber, windshields, and ordinary glass. Removes and cleans a wide range ofdeposits and soils quickly. Can be diluted for economical use. Reduced hazard to user and surfaces. Containsa combination of acids, detergents, wetting and penetrating agents. Contains a odor control agent to reducefumes. D-7 is inhibited against attacking most metals and paint when used in diluted form.

HOW TO USE:Using the proper dilution, apply by spraying or brushing. Allow surface to remain wet four to five

minutes, while agitating with a brush. Rinse thoroughly with clear water, allow to dry.

PROSPECTIVE USERS:Concrete mixers, cement contractors, and other accounts having accumulations of cement, plaster,

rust, scale, grease, oil, and road film to be removed from equipment.

DEMONSTRATION:Mix a solution of 1 part Concrete Cleaner with 1 part water (heavy duty solution) in a plastic spray bottle.Apply to cement deposit on equipment or floors, or on greasy concrete floor. Allow to stand 4 to 5 minutes,brush scrub and rinse. NOTE: A reasonable days accumulation of concrete will be readily removed,however a long-time accumulation will require repeated applications.

PRECAUTIONS:DANGER ! Keep out of the reach of children. Maybe fatal if swallowed. Cause burns. Avoid

contact with eyes and skin. In case of contact, immediately flush with plenty of water. Wash skin with soapand water. Use with adequate ventilation. Do not breath fumes.


12

12

DE-MIN-24DE-MIN-24BOWL & URINAL HEAVYBOWL & URINAL HEAVY

DUTY CLEANER ANDDUTY CLEANER ANDMINERAL REMOVER!MINERAL REMOVER!

Economical to useRapid Activity

Highly ConcentratedDissolves Encrustation's, Scale, and

Stains

This highly concentrated blend of detergents, inorganic acids, wetting agents, andrinse additives is specifically formulated to keep toilet bowls and urinals bright andsparkling clean. Regular; maintenance use of this product will help to clean traps andlines, aiding in preventing clogs. This product may be used to recondition badlysoiled bowls and urinals or for use as a regular maintenance housekeeping product.By removal of mineral scale, organic matter and stains from bowl and urinal surfaces,the source of offensive odors is eliminated.

NOTE: This product is made for use on toilet bowls and urinals only. Do not use onporcelain or enamel bathtubs or wash basins as etching will occur. This product is aheavy duty cleaner descaler.

DIRECTIONS FOR USE:Use bowl mop or brush to push water in bowl over trap. Pour 2 to 4 ounces of DE-MIN 24 onto bowl mop or brush and scrub inside surfaces thoroughly. Work cleanerunder the rim and down the sides to the bottom. Use more cleaner as needed. Flushto rinse clean. For stubborn stains and incrustations, repeat procedure.DO NOT MIX THIS PRODUCT WITH ANY OTHER CHEMICALS OR CLEANING PRODUCTS

CAUTION: This product contains hydrochloric acid. May be harmful or fatal if swallowed. Avoidinhalation of vapor. Keep container sealed when not in use. Rinse empty container beforediscarding.

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE, UT. 84054PHONE 801-295-5022 OUTSIDE SALT LAKE CITY 1-800-366-5022

13

13

DE-RUST 20

• Rust Remover and Phosphatizer • Metal Prep Agent


This product is used to soften and dissolve rust from: machinery, equipment, sheet iron, carpets, bridges, pipes, concrete, metal parts, automobiles.

This concentrated blend of inorganic acids, wetting agents, detergents and water softeners is specifically designed for the rapid removal of rust, while providing phosphatized ferrous metal surface. The detergent action helps to remove grease and oils which may have accumulated on the metal surface. Phosphatizing offers a very conducive surface for metals which are to be painted following the removal of rust. An excellent prep treatment and binder for metal surfaces to be painted. May be water diluted for lighter work.

For rust removal: Dilute concentrate with water at a rate of 1 part concentrate to up to 3 parts water. Solution may be applied by soaking, brushing, or spraying onto surfaces. Treatment time will vary depending upon the extent of the rust to be removed. Usually the process may be accomplished within 30 minutes, but solution may remain on surface for longer periods if required. Often it may be necessary to make a second application if rusting is extensive. Do not rinse. As a phosphatizing and rust preventative treatment: Dilute concentrate with water at a rate of 1 part concentrate to up to 30 parts water. Apply to surface by spraying, brushing, or soaking. Allow solution to air dry, do not rinse.

Description

Areas of Use

Directions

14

14

• Turns Solid Masses Into Free-Flowing Liquids • Concentrated Liquid Drain Opener – Almost Twice As Heavy As Water-

Gets To The Problem • Liquefies Rags, Grease, Paper, Sanitary Napkins, Tampons, Hair, Urine

salt

This highly specialized product is formulated to open clogged drains, and to be use as a preventive maintenance product in drains, sinks, and grease traps. This product maybe used in large municipal sewer lines. This powerful product helps eliminate backups, rodding and snaking of drain lines. Dynamite contains a special additive that coats drain pipe surfaces to help prevent harmful corrosion. Regular use will help prevent grease build-up. DIRECTIONS FOR USE: Always wear face shield when using this high powered product. Do-not mix with any other drain opener product or use immediately after using any other drain opening product. Water activates this product. • Small Drains- Apply 8 ounces, allow to stand 2-3 minutes, then flush with water

for 2 – 3 minutes. • Floor Drains – Apply 1 quart, allow to stand 10 minutes, then flush with water for

5 minutes. • 6 to 8 INCH Drains – Apply ½ gallon, allow to stand 15 minutes, then flush with

water to 5 minutes. • Grease Traps – Apply 1 quart or more. Use 20% to 50% of initial application

periodically for control. • Septic Tanks – Apply 1 gallon to 500-gallon capacity. Pour into drain.

LYN DISTRIBUTING 965 North Redwood Road, No. Salt Lake, Utah 84054 Phone (801)295-5022 Outside Salt Lake Area 1-800-366-5022

15

15

• Turns Solid Masses Into Free-Flowing Liquids • Concentrated Liquid Drain Opener – Almost Twice As Heavy As Water-

Gets To The Problem • Has built-in odor control that floats on surface to control odors • Liquefies Rags, Grease, Paper, Sanitary Napkins, Tampons, Hair, Urine

salt • Dissolves Styrofoam Packing or Plates

This highly specialized product is formulated to open clogged drains, and to be use as a preventive maintenance product in drains, sinks, and grease traps. This product maybe used in large municipal sewer lines. This powerful product helps eliminate backups, rodding and snaking of drain lines. Dynamite Plus contains a special additive that coats drain pipe surfaces to help prevent harmful corrosion. Regular use will help prevent grease build-up. DIRECTIONS FOR USE: Always wear face shield when using this high power product. Do-not mix with any other drain opener product or use immediately after using any other drain opening product. • Small Drains- Apply 8 ounces, allow to stand 2-3 minutes, then flush with water for 2 – 3

minutes. • Floor Drains – Apply 1 quart, allow to stand 10 minutes, then flush with water for 5 minutes. • 6 to 8 INCH Drains – Apply ½ gallon, allow to stand 15 minutes, then flush with water to 5

minutes. • Grease Traps – Apply 1 quart or more. Use 20% to 50% of initial application periodically for

control. • Septic Tanks – Apply 1 gallon to 500-gallon capacity. Pour into drain.

LYN DISTRIBUTING 965 North Redwood Road, No. Salt Lake, Utah 84054 Phone (801)295-5022 Outside Salt Lake Area 1-800-366-5022

16

16

Contains a blend of acids, wetting agents and solvents to remove scale from ceramic tile,brick, glass, shower stalls, etc. REMOVES: Soap scum, water spots, mineral deposits, greaseand oil. BRIGHTENS: Stainless steel and chrome. CLEANS: Toilet bowls, urinals, ceramic andporcelain tile, tubs, showers and sinks. This clear, green, pleasantly scented, non-viscous foodgrade acid detergent is formulated for the cleaning and maintenance of toilet bowls, urinals,wash basins, porcelain and ceramic tile, sinks, shower stalls, glass shower doors, stainless steelbath tubs, and water fountain basins. Use of this product will clean and remove water spots andmineral deposits, rust, grease and oil, and soap scum from bathroom surfaces safely andeffectively. Will not harm most paints. Very safe to use. Non-fuming. Ready to use. Foam-briteis stronger than Steel-Brite for heavy hard water problems.Where to Use:Hotels, motels, locker rooms, health spas, nursing homes, hospitals, municipal buildings, jails,apartments, and schools.Directions:Apply product at appropriate dilution concentration with a hand trigger sprayer, plastic pump upsprayer, hose foaming sprayer, sponge, cloth, bowl swab or brush. Allow surface to remain wetfor 2 to 3 minutes, then agitate surface with brush, swab or sponge. Rinse thoroughly and wipedry to restore luster and to minimize water spotting.

Clinging Foam Descaler-CleanerWith a Pleasant Fragrance

Instantly dissolves dirt, body oils & mineral deposits. •• Economical—dilutes tovarious concentrations to suit cleaning tasks. •• Rust-inhibitive- can be used onany metal surface except aluminum & magnesium. •• Restores & rejuvenates.

DilutionsLight Duty 1 part cleaner / 35 parts waterMedium Duty 1 part cleaner / 25 parts waterHeavy Duty 1 part cleaner / 15 parts waterExtra Heavy Duty 1 part cleaner / 1-5 parts waterWhen using this product be sure to let foam act long enough topenetrate and loosen soil and grime.


17

17

LDX-33 ACID DETERGENT

• Industrial Detergent • Medium Foaming • Low Odor/Fume • Free Rinsing


This detergent is ideal for use in food related industries such as, dairies, canneries, breweries, grocers, ice cream manufacturing plants, candy producers, restaurants, bakeries, meat packers, bottling plants and many other types of food processors.

This product is a highly concentrated blend of inorganic acids, detergents, wetting agents, penetrants, and rinse conditioners for rapid and thorough removal of acid-soluble debris. Alkaline films and residues may be effectively removed from stainless steel, porcelain, ceramic tile, grout, sinks, bathtubs, shower stalls, windows, and cooking equipment with regular use of this product, thereby eliminating the need for expensive, time-consuming procedures. In janitorial and industrial applications, this product is ideal for removal of oxides and carbonates which accumulate on metallic surfaces causing a dull, filmy appearance. The product will brighten metal and remove light rust deposits. Dilutes with water up to 1 : 30 depending on application.

Dilute with water to concentration desired for effective cleaning: Heavy Encrustations: 1:4 Cooking Equipment: 1:20 Ice Machines: 1:15 Descaling Swimming Pools: 1:10 Removing Milkstone: 1:30 Stainless Steel Tanks: 1:15 Spray or brush diluted solution onto surface and allow to remain in contact for 3 to 5 minutes or as required to do the job. Rinse thoroughly with clear water to remove residue. Use a potable water rinse if equipment is used with food products.

Description

Areas of Use

Directions

18

18

DESCRIPTION: A triple action, jelled, green bowl cleaner that cleans, deodorizies toilet bowls and other similar surfaces. Contains a deep penetrating agent that loosens encrusted lime deposits, soil, stains and scum with ease. Destroys bacteria on contact and leaves toilet areas with a fresh, mint odor. It’s easy to use because the product is jelled and will cling to undersides of bowl rims and on vertical surfaces. ADVANTAGES: • Jelled for easy use on vertical surfaces • Contains a high percentage of detergents for

faster and easier cleaning • Highly concentrated • Pleasant, mint odor • Green color for easier use • Economical • Fast-works in seconds after application • Dissolves algae deposits

AREAS OF USE: • Toilet bowls • Urinals • Boat Algae DIRECTIONS: • Remove water from bowl by forcing over

trap with applicator swab. • Press excess water out of swab. • Saturate swab with Might Mint, hold bottle

and swab over bowl. • Clean entire bowl, under the rim and at

water outlets. Flush to rinse swab and rinse Mighty Mint off.

• To clean urinals, saturate swab with Mighty Mint holding swab and bottle over urinal, swab entire surface with attention to grooves at sides and water outlets at the top.

• Flush well and rinse out swab.

LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake,Ut. 84054 Phone (801)295-5022 Outside Salt Lake Area 1-800-366-5022

19

19

• Removes Milk & Water Scale • Free Rinsing • Non-Fuming • Removes Lime Deposits • Medium Sudsing • Nice Odor

• Showers – Walls-Floors • Locker Rooms –Walls – Floors • Dairy Tile Floors • Spas – Floors – Walls • Swimming Pools

This concentrated mixture of inorganic acids, wetting agents, penetrants, and rinse additives quickly cuts through heavy build-ups of hard water scale. This product is recommended for descaling and lime removal on high temperature food equipment, cooking kettles, steam tables, dishwashers, tile floors, walls, and other areas where hard water needs removed. This product works to clean slippery floors in kitchens and plant work areas that may need to be deep clean to make floors slip resistant. DIRECTIONS FOR USE: Dilute with water to concentration desired for effective cleaning: • Kitchen Floors - 1 to 3 - 5 parts water • Showers – Floors & Walls 1 to 4 – 10 parts water • Dishwashers – 1 to 8 parts water • Swimming Pools – 1 to 3 parts water Spray or brush diluted solution on to surface and allow to remain in contact for 3 to 5 minutes or as required to do the job. Rinse thoroughly with clear water to remove residue. Use a potable water rinse if equipment is used with food products. LYN DISTRIBUTING 965 No. Redwood Road, No. Salt Lake, UT 84054Phone In Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

20

20

TILE CLEANER & BRIGHTENER

“TURN GRAY BACK TO WHITE”

A blend of acid-detergents for cleaning and quickly brightening of tile floors, urinals, and toilets. High foaming action pushes out dirt, grease, and oil to leave surface sparkling clean. This product is used to remove hard water rings off toilet bowls and in showers when nothing else will work. Always use with caution. This product will etch some tile so always test before using. Restore may be used on glass and mirrors when nothing else will remove the hard water and replacement is considered, then try Restore before replacing glass, but use with caution because this product may etch the glass. Always wear gloves when using this product it penetrates when you don’t know it’s working. Restore needs to remain on surface for approximately 60 seconds. When cleaning tile floors always try our product X-It-Out before using restore. Never mix these 2 products together because they will react together. Restore should be used 2 – 3 times per year to clean and brighten and remove water scale. Weekly cleaning with a heavy duty cleaning disinfectant like Patrol will keep grease and dirt off tile floors in locker rooms and shower floors. Cleaning showers and locker room tile floors with X-IT-OUT monthly will keep algae and dirt grime off floors and walls. DIRECTIONS FOR USE: Apply with hand foamer or plastic pump-up sprayer. Use undiluted or 1 to 1 with water. Allow to remain on surface for 60 seconds then brush lightly and rinse. Always wear protective gloves when using this product. LYN DISTRIBUTING 965 No. Redwood No. Salt Lake, Utah 84054Phone (801)295-5022 Outside Salt Lake Area 1-800-366-5022

21

21

THICK MILD CLEANER & DESCALER PLEASANT FRAGRANCE

FOR • PORCELAIN • ENAMEL • STAINLESS STEEL • TOILET BOWLS • URINALS • CHROME

• CHROME FAUCETS • BATHTUBS • CERAMIC WALLS • SHOWERS

Safety clean was especially formulated for easy cleaning and removal of water deposits, heavy soap scum, soil, and greasy residues. Safety clean may be used to clean and maintain commodes, urinals, showers, chrome fixtures, faucets and pipes. Safety clean contains no hydrogen chloride or other harsh acids. DIRECTIONS: Apply with a coarse spray, sponge, cloth, or bowl swab. Allow surface to remain wet 1 to 2 minutes. Scrub heavy soil if necessary. Rinse with water and dry. Safety clean may be diluted with water ( 1 part cleaner with up to 4 parts water ) depending on surface to be cleaned. Caution: Contains acid. Do not take internally. Avoid contact with eyes or skin. If in the eyes see a physician immediately. If swallowed, drink large quantities of milk or water follow with milk of magnesia, beaten eggs, or vegetable oil. Call physician immediately. DO NOT MIX WITH OTHER MATERIAL. LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake,Ut. 84054 Phone (801)295-5022 Outside Salt Lake Area 1-(800)-366-5022

22

22

Contains mild acids, wetting agents and solvents to remove scale from ceramic tile, brick,glass, shower stalls, etc. REMOVES: Soap scum, water spots, mineral deposits, grease and oil.BRIGHTENS: Stainless steel and chrome. CLEANS: Toilet bowls, urinals, ceramic andporcelain tile, tubs, showers and sinks. This clear, red, pleasantly scented, non-viscous foodgrade acid detergent is formulated for the cleaning and maintenance of toilet bowls, urinals,wash basins, porcelain and ceramic tile, sinks, shower stalls, chrome faucets and fixtures, glassshower doors, stainless steel bath tubs, and water fountain basins. Use of this product will cleanand remove water spots and mineral deposits, rust, grease and oil, and soap scum frombathroom surfaces safely and effectively. Will not harm most paints. Very safe to use. Non-fuming. Concentrated for economy. Product should be diluted before use.Where to Use:Hotels, motels, locker rooms, health spas, nursing homes, hospitals, municipal buildings, jails,apartments, and schools.Directions:Apply product at appropriate dilution concentration with a hand trigger sprayer, plastic pump upsprayer, hose foaming sprayer, sponge, cloth, bowl swab or brush. Allow surface to remain wetfor 2 to 3 minutes, then agitate surface with brush, swab or sponge. Rinse thoroughly and wipedry to restore luster and to minimize water spotting.

Clinging Foam Descaler-CleanerWith a Pleasant Fragrance

Instantly dissolves dirt, body oils & mineral deposits. •• Economical—dilutes tovarious concentrations to suit cleaning tasks. •• Rust-inhibitive- can be used onany metal surface except aluminum & magnesium. •• Restores & rejuvenates.

DilutionsLight Duty 1 part cleaner / 35 parts waterMedium Duty 1 part cleaner / 25 parts waterHeavy Duty 1 part cleaner / 15 parts waterExtra Heavy Duty 1 part cleaner / 1-5 parts waterWhen using this product be sure to let foam act long enough topenetrate and loosen soil and grime.


23

23

Super Concentrate ALUMINUM

BRIGHTENER Freight Saver

*Brightens Aluminum *Removes oxides, Road film, and Diesel Smoke *Highly Concentrated- Economical *Works Quickly- Requires No Heavy

Scrubbing or Polishing A highly concentrated blend of detergents and inorganic acids formulated for the removal of oxides, scum, road film, and diesel smoke deposits from aluminum truck bodies and trailers. Directions for use: This super concentrate should be diluted 2-6 gallon containers mixed with 43-gallons cold water to make 55 gallons then used as a regular concentrated aluminum cleaner-brightner with the following use instructions. To avoid corrosion, mix solution in a plastic pail or other suitable container. Dilute concentrate with 50 - 100 parts of water to one part A.B.C. concentrate. Apply solution to surface to be cleaned with brush or sprayer, working in small sections from the bottom upward to avoid streaking. Allow solution to remain on surface for 3 to 5 minutes. Do not allow surface to dry out during application. Agitate surface with a long handle brush to remove heavy soils, Then rinse with clear water. Avoid contact with glass or porcelain surfaces as product will etch. If contact should occur, rinse immediately with water. Caution: Keep out of the reach of children. Product contains inorganic acids, avoids contact with eyes, skin or clothing. It is advisable to wear protective clothing during application procedure. If eyes or skin are effected, flush area with copious amounts of magnesia or water beaten with egg whites. Contact physician. Keep container sealed when not in use. Rinse empty container before disposal in authorized landfill site. LYN DISTRIBUTING 965 NORTH REDWOOD ROAD NO. SALT LAKE, UT. PHONE 801-295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

24

24

DESCRIPTION

This product will quickly remove oxidation and road film without agitation, it brightens surfaces uniformly. This is a heavy duty acid-based product made especially for industrial and institutional use only. This product should be use by trained personnel only. This product requires no brushing or rubbing to clean surfaces. This product works well to clean grime off wheels and extremely dirty truck frames.

This concentrated cleaner may be diluted with one hundred parts water, depending on the condition of the surface to be cleaned. Extremely severe conditions may allow only a 10 to 1 dilution. Brush or spray solution on surface to be cleaned, working from the bottom up. Allow to remain wet for three to five minutes then high pressure rinse thoroughly. Use plastic pails or automatic injectors for mixing or applying solutions. Always test on hot surfaces. Attention: If product must be used near glass, cover glass with oil first. However, user does so at own risk. This product will etch glass. Do not mix this cleaner with any other cleaners. Do not use on polished aluminum. SAFETY: This product contains sulfuric and fluoride based acids. Causes skin and eye burns. Use eye protection and rubber gloves.

LYN DISTRIBUTING 965 No. Redwood Road No. Salt Lake, UT 84054 Phone (801) 295-5022 Outside Salt Lake Area (800) 366-5022

TRAILER WASH ACID

CONCENTRATED CLEANER, BRIGHTENER, & ROAD FILM

REMOVER. Use on concrete trucks, truck vans, refrigerated trailers, and dry trailers.

DIRECTIONS FOR USE:

25

25

ACTIVE INGREDIENTS: Hydrogen chloride.........................................…......................................................................................8.0% n-Alkyl dimethyl ethylbenzyl ammonium chloride..........................................................….........................0.5% Alkyl (Cl 4, 50%; Cl 2, 40%; Cl 6, 1 0%) dimethyl benzyl ammonium chloride........................................... 0.5%

Application: To clean and disinfect both toilet bowls and urinals - first remove standing water by forcing it up and over the trap area with swab mop. Wring excess water out of the swab mop and saturate with bowl cleaner. Start the cleaning operation under the rim of the commode or top rim of the urinal using the side of the applicator. Force the bowl cleaner up and in to the water outlet holes allowing the product to run down the sides of the bowl or urinal. This will allow the full strength product to come into direct contact with the areas most likely to have the worst build up of organic soils. Proper disinfection requires a thorough cleaning of the trap area as well as the bowl. If you have done a proper job of forcing all the standing water out, you should have no trouble swabbing the trap and bowl without the product becoming diluted. Allow this product to remain for at least 10 minutes until all rust, scale and deposits are loosened. Rinse by flushing. Use a germicidal cleaner for the seat and outside areas - do not use this product on any surface outside the commode or urinal. FirstAid: External-Eyes:wash with water for 15 minutes. Get prompt medical attention. Skin: wipe acid gently off the affected area and immediately flood the surface with water. Use soap freely, then cover with moist magnesia or baking soda. Keep out of reach of children. For industrial and institutional use only by trained personnel. DANGER - POISON: May be fatal or harmful if swallowed. Do not breathe vapor or fumes. Produces chemical burns. Do not get in eyes, on skin, or on clothing First Aid: Internal - Call a physician immediately. Drink a teaspoon or more of magnesia, chalk or small amounts of water-softened soap in milk or raw egg white. Authorized by the USDA for use on federally inspected meat and poultry plants. Classification C-2 for use in toilets and / or dressing rooms. Registered with the Environmental Protection Agency.

LYN DISTRIBUTING 965 No. Redwood Road, North Salt Lake, Utah 84054 Phone 295-5022 www.lyndist.com Outside Salt Lake Area 1-800-366-5022

Technical Data

Color...............................................Clear Blue Fragrance.....................................Wintergreen pH.............................................. Less than 1.0 Density ............................................. 8.8#/gal. Acid content.............................. 8.0% min. HCL Stability .....................................2 yr. minimum Detergency ........................................Excellent Viscosity……thick…………………….………..800 cps Rust removal......................................Excellent Flash point.............................................. None

TRI-SAN GERMICIDAL BOWL

CLEANER

26

26

DESCRIPTION

This product will quickly remove oxidation and road film without agitation, it brightens surfaces uniformly. This is a heavy duty acid-based product made especially for industrial and institutional use only. This product should be use by trained personnel only. This product requires no brushing or rubbing to clean surfaces. This product works well to clean grime off wheels and extremely dirty truck frames.

This concentrated cleaner may be diluted with one hundred parts water, depending on the condition of the surface to be cleaned. Extremely severe conditions may allow only a 10 to 1 dilution. Brush or spray solution on surface to be cleaned, working from the bottom up. Allow to remain wet for three to five minutes then high pressure rinse thoroughly. Use plastic pails or automatic injectors for mixing or applying solutions. Always test on hot surfaces. Attention: If product must be used near glass, cover glass with oil first. However, user does so at own risk. This product will etch glass. Do not mix this cleaner with any other cleaners. Do not use on polished aluminum. SAFETY: This product contains sulfuric and fluoride based acids. Causes skin and eye burns. Use eye protection and rubber gloves.


T.R.-T.A.

CONCENTRATED CLEANER, BRIGHTENER, & ROAD FILM

REMOVER. Use on concrete trucks, truck vans, refrigerated trailers, and dry trailers.

DIRECTIONS FOR USE:

27

27

Markets:

Although versatile enough to use virtually anywhere, suggested uses include freshening rooms, fabric, drapes, bedspreads, carpet, auto interiors and air conditioners, closets, lockers, chests, shoes, luggage, showers, and garbage receptacles in hotel rooms, restaurants, hospitals, apartments, schools, nurseries, fitness centers, animal clinics and nursing homes. Directions:

To deodorize the air: Spray whenever odors are a problem or occur. Allow a few seconds for super-fine mist to bloom.

To deodorize fabrics: Hold can 14 to 15 inches from surface and spray evenly in a sweeping motion to obtain maximum penetration. Description:

This new and improved product represents yet another evolution in room deodorizers. This breakthrough formulation contains all of the performance one might expect from a dry-type air freshener — but with a twist. Excellent bloom and suspension time, ultra fine particles, no fall out, and no residue for use in textile applications are just some of the attributes. What is truly remarkable about the product is that it achieves the incredibly dry spray without using ozone depleters. In fact, this product contains less than 30% total VOC content! A remarkable spray is not the only exciting thing about this new and improved formulation. The fragrances have been upgraded to ensure superior olfactory notes and tones. But a fantastic fragrance is not the only premium feature you will find. Also included is not one, but two odor counteractants for maximum deodorizing power. The dual system quickly neutralizes malodors with industrial and institutional strength even on smoke, decay, urine, feces, solvent, vomit, cooking, animal and more. Also featured is a new light-touch actuator for effortless pinpoint spray control. When used as directed, this advanced formula will effectively freshen without staining or leaving a residue. Fragrances: Baby Powder, Bayberry, Lemon Peel, Snappy Apple, Cinna-Fresh, and Cool Breeze. Also available in metered versions. 20 ounce cans.

Lyn Distributing 965 North Redwood Road North Salt Lake, Utah 84054 Phone (801) 295-5022 Outside Salt Lake Area 1-800-366-5022 web page www.lyndist.com

• Innovative Dry Formula • Ultra Fine Spray-Long Suspension Time • Dual Odor Counteraction System • Low VOC Content - Meets ’96 CARB Limit • Nonchlorinated, Non-Ozone Depleting • Light Touch Actuator • Fragrances: Baby Powder, Bayberry, Lemon Peel, Snappy Apple, Cinna-Fresh, and Cool Breeze

28

28

This product is an aerosol version that’s close to our Natural Solv-x product and is an excellent emulsified solvent. This high foaming, nonflammable, all purpose cleaner is especially formulated with ingredients that allow it to remain on vertical surfaces and remove dirt, smudges, grease and fingerprints. This special formulation does not contain any chlorinated solvents or petroleum distillates. Powerful natural degreasers and deodorizers are combined to provide quick and effective cleaning on most surfaces and soils. Use to clean and degrease doors, walls, ceramic and plastic tile, floors, bathroom fixtures, and more. 20 ounce can. This all organic, biodegradable solvent based all purpose cleaner will find a home in virtually all businesses and industrial industries. To name a few would be; banks, business offices, service stations, restaurants, hotels, motels, schools, institutions, printers, spas, health clubs, nursing homes, contract cleaners, factories and office buildings to name a few. Directions: For heavily soiled areas, spray surface to be cleaned from a distance of 6 to 8 inches allow to stand for two to three minutes, scrub and wipe clean. Repeat if necessary. For stubborn stains, allow foam to remain longer on surface before removing. WARNING: Eye and skin irritant. Avoid contact with skin and eyes. If eye contact occurs, flush with water for 15 minutes. If irritation persists, consult a physician. If skin contact occurs, remove contaminated clothing. Wash with soap and warm water. If irritation persists, consult a physician. Do not ingest. lf this should occur, drink large volumes of water and seek medical attention.

KEEP OUT OF REACH OF CHILDREN.

www.lyndist.com

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD NORTH SALT LAKE, UTAH 84054 PHONE IN SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

Citrus Foaming All Purpose Cleaner

Spray On -Wipe Off Clean Doors, Walls,

Telephones, Light Switch Covers, Desk Tops, Arm Rest

in Automobiles

29

29

DESCRIPTION Acrylic Coating provides an invisible quick drying coating that protects wood, metal, photographs, artwork, blueprints, books, etc., from water, dirt, oil, chemical fumes, grease, skin oils, acids or alkalis. Prolongs life of coated pieces. DIRECTIONS Apply to clean dry surface. Fan spray across surface from approximately 10 inches to provide a thin even coat. Allow several minutes before applying second coat. Dries hard in approximately one (1) hour. ADDITIONAL PRODUCT DATA: Sprays a superfine mist, which provides an even coating with no brush marks. Eliminates mixing, brushing and clean-up problems. Sealed container cannot dry up or skin over as with paint type cans. QUICK DEMONSTRATION Take a piece of tissue. Spray with acrylic coating. Let coating dry clear. Then put a few drops of water on tissue both the treated and untreated parts. Note the water penetrates through the untreated part while it beads up on the treated surface and you cannot feed the water on the underside. DANGER Contains ethyl acetate. Use only in a well ventilated area. Do not use near heat, sparks, or open flame. Avoid contact with eyes or prolonged contact with skin. In case of contact with eyes, flush with water. If irritation persists, get medical attention. Do not puncture or Incinerate container. Do not expose to heat or store at temperatures above 120°F. Keep out of reach of children. Manufactured for Lyn Distributing 965 North Redwood Road North Salt Lake, UT 84054 Phone(801)295-5022 WATS(800)366-5022 FAX(801)295-5044] E-mail [email protected] WWW http://www.lyndist.com/

CLEAR ACRYLIC COATING

Clear, Transparent, Durable,

Non-Yellowing

30

30

AIR DUSTER

Ø Leaves no residue Ø Quick & easy Ø Environmentally safe Ø Will not harm the atmosphere


Offices, homes monitors, restaurants, keyboards, motels, hotels, office equipment, darkrooms, computers, industrial plants, printers, schools, photographic equipment, laboratories, etc.

Air Duster is a authorized product which is a blend of environmentally safe ingredients packaged at high pressure to offer a quick method of removing dust, paper chips, staples, paper clips and other foreign material. Just point the nozzle towards area to be cleaned and spray. The strong blast quickly cleans most surfaces. Use wherever screen cleaner or body cleaner cannot be applied, especially recessed areas. Can also be used as a film duster.

Remove protective cap. Point opening in spray nozzle toward surface to be cleaned. Holding can in upright position 12 to 14 inches from surface, press down on top of spray nozzle to use. Hold can above keys on keyboard, forcing spray down into keys to blow particles out from around keys. Spray in quick bursts forcing particles from surfaces.

Description

Areas of Use

Directions

31

31

Anti seize

Lubricating spray

Manufactured by LYN DISTRIBUTING 965 North Redwood Road North Salt Lake, UT 84054 (801) 295-5022 WATS (800)366-5022 FAX (801)295-5044 E-mail : [email protected] WWW http://www.lyndist.com/

Type product : Aerosol lubricant specific gravity: .20 Clarity: opaque spray pattern : Heavy wet mist Color: silver pressure : 40 PSI @ 720°F Odor: mild -lead content : None Viscosity: slight lubricating ability : Excellent Drying time: 2 to 3 minutes water solubility : None Penetration : Excellent deleterious effects on: Retards corrosion ferrous metals : None Non-conductive non-ferrous metals : None Glass : None Formulation : Special blend of lubricants, heat resistant compounds

This compound shortens downtime and reduces the cost of maintenance by providing positive complete parts protection against extreme heat (over 2100°F). Seizure, galling, fretting, carbon fusion, rust, environmental corrosion and galvanic pitting. Used in industrial plants, paper and pulp mills, federal, State, city and county agencies for sanitation and water departments, machinery maintenance. Highway, road and street equipment, heavy-duty trucks, school busses, chemical plants, food processing. For all bearing applications, newspaper and printing plants, heavy construction equipment, fork lifts, trucks, marine motors, farm equipment, gas transmission and electric power plant.

Shake well before using, use in an upright position. Spray 8” to 10” from surface to be covered. For best results, use in temperatures above 650°F. Surfaces should be free from dirt, grease, and oil before spraying. After spraying, turn can upside down, press valve for a few seconds to clean out material left in spray tip.

Description

Technical Data

Directions

32

32

• Solvent Based Residual Insecticide • Residual Action Using Propoxur • Kills a Variety of Flying & Crawling Insects • Continues to Kill for Several Weeks • Nonchlorinated, Non-Ozone Depleting


Applications for this product can be found in commerical and institutional buildings, apartment, garages, motels, hotels, food processing plants, and most industrial pest control needs.

This product is a ready to use crack & crevice insecticide for the control of crawling insects. Lasts for several weeks. This formulation contains Propoxur, a vaporizing insecticide that kills insects fast. Extender tubes are packed in every case to aid in reaching into cracks and crevices. 20 ounce can.

Important: Hold container only in upright position to spray. Keep spray actuator pointed to mark on valve cup. Direct spray from face. Insert extension tube into actuator and hold container 6 to 12 inches from surface and spray area of infestation. Thorough applications produce a coating that will vaporize into cracks and crevices for insect control. If reinfestations occur, repeat applications as necessary. Use for spot treatment only.

Description

Areas of Use

Directions

33

33

Non-Flammable Brake & Parts Cleaner Non-Flammable Brake & Parts Cleaner is a flush action solvent that quickly removes fluid, grease and oily contaminants from brake linings, disc pads, drums, cylinders and springs. This product is non-flammable because it is a chlorinated product. This product will eliminate disc brake squeal. Non-flammable Brake cleaner is used by truck lines, bus lines, golf cart maintenance shops, forklift shops, automotive dealerships, and rental companies. Directions: Spray brake housing or coil fins liberally. Continue to spray until all contaminants run off. Wipe or let air dry. This product evaporates quickly. Will not harm most rubber parts. This is the perfect product to use for cleaning before and after disassembly. Non-Flammable

• High Discharge Flush Valve • Removes Fluid, Grease and Oily

Contaminants From Brake Linings And Drums

• Stops Disc Brake Squeal • Not Necessary To Disassemble Brake Unit • Useful On Linings, Disc Pads, Drums,

Cylinders And Springs • Cleans Tools And Other Parts • Evaporates Leaving No Film • Non-Flammable – Will Not Burn

Lyn Distributing 965 North Redwood Road, North Salt Lake, Utah 84054Phone (801)295-5022 Outside Salt Lake Area 1-800-366-5022

34

34

Non-chlorinated Brake & Parts Cleaner Non-chlorinated Brake & Parts Cleaner is a flush action solvent that quickly removes fluid, grease and oily contaminants from brake linings, disc pads, drums, cylinders and springs. This product will not cause environmental concerns because it is a non-chlorinated product. This product will eliminate disc brake squeal. Non-Chlorinated Brake cleaner is used by truck lines, bus lines, golf cart maintenance shops, forklift shops, automotive dealerships, and rental companies. Directions: Spray brake housing or coil fins liberally. Continue to spray until all contaminants run off. Wipe or let air dry. This product evaporates quickly. Will not harm rubber parts or plastic. This is the perfect product to use for cleaning before and after disassembly. Caution: Flammable

• High Discharge Flush Valve • Removes Fluid, Grease and Oily

Contaminants From Brake Linings And Drums

• Stops Disc Brake Squeal • Not Necessary To Disassemble Brake Unit • Useful On Linings, Disc Pads, Drums,

Cylinders And Springs • Cleans Tools And Other Parts • Evaporates Leaving No Film

Lyn Distributing 965 North Redwood Road, North Salt Lake, Utah 84054Phone (801)295-5022 Outside Salt Lake Area 1-800-366-5022

35

35

Block OutBlock Out

LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, Utah 84054Phone Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

36

36

Battery Terminal Coater & Protector

Long Term Corrosion Preventative. Flexible &

Durable Prolongs Battery Life

Puts a brown protective coating on any surface that it is applied to. Bonds to and protects Battery Terminals, Cables, Carriers, and Hold Downs, against deterioration and corrosion even under the most severe atmospheric conditions. May be used to protect all types of metal in all types of conditions, indoors and outdoors for long term protection against rust, corrosion and weathering.

Use on autos, boats, golf carts, lift trucks, construction vehicles, snow clearing vehicles, lawn maintenance equipment, reserve power generators, amusement park vehicles, and R V generators. Excellent long term protection for any battery during storage or use. Stays pliable. Will not crack or peel. Improves electrical output. Protects battery boxes, and battery holding areas for long periods of time.

Directions: Remove corrosion with "Battery Terminal Cleaner" and wipe dry, then spray an even coat over all surfaces. For aevere storage conditions a second coat may be applied within a few minutes. Meets these specs. Mil-c-16173D, grade 4, and Mil-C-83933 A. Caution: Use only in a well-ventilated area. Do not use hear heat, sparks, or open flames. Avoid contact with eyes or prolonged contact with skin. If swallowed, do not induce vomiting. Call physician immediately. Keep out of reach of children. MSDS SHEET WEB SITE WWW.LYNDIST.COM PURCHASE ON LINE

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD NORTH SALT LAKE, UTAH 84054 PHONE IN SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

37

37

http://www.lyndist.com/msds_sheets/sec_aerosols/battcoater.PDF

http://www.lyndist.com/

http://www1.lyndist.com/html/eng/373-AA.shtml

LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, Utah 84054 Phone Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

www.lyndist.com

38

38

BaseStrip Aerosol Floor Finish/Wax Remover Ø Eliminates Costly Stripping Ø Converts Waxes and Plastics Ø Finishes into Easily Removed Emulsion Ø No Need for Harsh or Abrasive Cleaners

Manufactured for LYN DISTRIBUTING 965 North Redwood Road North Salt Lake, UT 84054 (801) 295-5022 WATS (800)366-5022 FAX (801)295-5044 E-mail : [email protected] WWW http://www.lyndist.com/

Applications for this product include restaurants, hotels, motels, industrial plants, cafeterias, hospitals, churches, nursing homes, department stores, grocery stores, schools, apartments and other institutions.

This product is nonflammable, heavy -duty, foaming wax stripper with an inverted valve. Cleans and strips areas where a floor machine cannot reach. The wet foam clings to vertical surfaces such as baseboards, metal doors and frames, making them quick and easy to clean up months and even years of buildup. The powerful formula rapidly converts waxes and plastic type floor finishes into an easily removed emulsion. Corners come clean in a flash. The ideal product for solving one of the most difficult cleaning problems. 24 ounce can.

Shake can well and invert before using. Before using, determine suitability and safety of product on surface to be cleaned. Hold can upside down. Spray wax stripper about 6 to 10 inches from baseboard or floor surface. A thin, even coating should cover the wax and soil. Do not apply to painted surfaces- immediately wipe off any overspray. Wait 3 to 5 minutes. Then wet scrub the surface using either a white cleaning pad, cleansing sponge or similar item. Rinse surface with clean, warm water.

Description

Areas of Use

Directions

39

39

BELT DRESSING Ø Stops slipping and squealing Ø Adds more power Ø Reduces wear on moving parts


Applications for this product can be found in garment/textile manufacturing, automotive and fleet maintenance, marine, aircraft, and most general industriall maintenance facilities.

This specially formulated product stops belts from slipping, adds more power, eases strain on bearings and bushings, and stops squealing. This Belt Dressing works particularly well on leather, rubber, canvas, and fabric belts. The results are quick and economical improvements over untreated belts. A next generation formulation, this product is made without chlorinated solvents or ozone depleters.

SHAKE WELL BEFORE USING. From a distance of 6-8 inches, lightly spray the belt while running. Use only enough spray to cover belt but do not use excessively. For hard-to-reach areas or to reduce overspray, insert extension tube provided.

Description

Areas of Use

Directions

40

40

TECHNICA

DATA

FORM: Oil Base Aerosol ODOR: Petroleum Oil COLOR: Gray-Black DETERGENCY. None TOXICITY- 200 ppm OSHA TLV WETTING ABILITY- Saturates STORAGE STABILITY- 1 year plus COLD STABILITY. 0 F PHOSPHATES: None

CHAINS & CABLES NUTS - BOLTS

CORRODED PARTS DOOR HINGES - LOCKS

MACHINE PARTS

FLASH POINT 2000 F plus FLAME EXTENSION: 18" plus SOLUBILITY IN WATER: 0% SPECIFIC GRAVITY, 0.9 % VOLATILE BY VOLUME: 25 pH: N/A PROPELLENT. Hydrocarbon EVAPORATION RATE: Very Slow BIODEGRADABILITY. No

INDUSTRIAL MACHINERY MACHINE SHOPS CARS - TRUCKS

HOMES OIL RIGS

OFFICE BUILDINGS

www.lyndist.com LYN DISTRIBUTING 965 NO. REDWOOD ROAD NORTH SALT LAKE, UT.84054 PHONE IN SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

FOAMY Chain & Cable Lubricant with Moly is specially designed to provide maximum protection to wire ropes and chains of all types. Will completely penetrate into the strands of wire ropes providing the ultimate in lubrication. Does not build up on chains to attract dust or dirt, but provides complete

lubrication of rollers, pins and bushings. Continued use of this product reduces chain whip, vibration and noise, also protects against galling, seizing and wear, thus adds life to chain cable and

sprockets.

Foamy CHAIN & CABLE

LUBRICANT WITH MOLY

TECHNICAL DATA

APPLICATIONSAREAS OF USE

41

41

Areas of Use It is especially suited for use on most any coils such as window air conditioners, roof top HVAC units, auto radiators, small air cooled equipment, small condenser and evaporator coils, metal filters, fan blades, and more. Description This high performance product is a heavy-duty foam detergent coil cleaner in the convenience of an aerosol can. Nonflammable and water based, it contains no chlorinated solvents or ozone depleters. Equipped with a special 360 degree valve, this product can be sprayed in any position to easily reach into tight areas. The aggressive alkaline detergent blend quickly and easily liquefies dirt, grease, oil, or other residue and deposits. Fortified with corrosion inhibitors to prevent metal degradation, the product will not harm drain pans, plastics, or other materials in and around the area. The clinging foam is completely self-rinsing on condensate producing coils. Simply spray on and condensation generated will wash away the emulsified material. The pleasant lemon fragrance helps leave area not only cleaned but also deodorized. 20 ounce can. Directions Turn off or disconnect power to unit being serviced. Shake well. Remove cap and point toward surface to be cleaned. Thoroughly saturate the targeted area with product. Be sure foam evenly covers the entire surface. With this self-rinsing formula, the foam will break and condensation accumulation will completely rinse the emulsified material. However, you may wipe clean or rinse with water if desired or if using on non-condensation producing coils. For extremely stubborn or heavy deposits, repeat applications may be necessary. Turn on or return power to the unit.

LYN DISTRIBUTING 965 North Redwood Road North Salt Lake, UT 84054 (801) 295-5022 WATS (800)366-5022 FAX (801)295-5044 E-mail : [email protected] Web page http://www.lyndist.com/

Aerosol Spray For Convenient Use High Foaming 360 Spray Heavy Duty Alkaline Detergent Cleaning Power Self-Rinsing Fast Break Foam Contains No Ozone Depleters Nonflammable, Water-Based Pleasant Lemon Fragrance

42

42

COIL CLEANING SOLVENT Ø High Solvency Cleaning Power Ø High Pressure Blasting Nozzle Ø Leaves No Residue, Dries Fast Ø Nonconductive and Nonflammable Ø Pleasant Lemon Fragrance Ø Contains No Ozone Depleters


For use by professional maintenance personnel on HVAC equipment for residential, commercial, and institutional applications.

This high performance product offers maximum cleaning and clegreasing from an aerosol coil cleaner. The high solvency formula quickly and easily liquefies dirt, grease, oil or other residue and deposits while the blasting nozzle powerfully separates the undesirable materials from the surface. The product is super-fast evaporating and normally requires little or no wiping or post-use clean up. The nonflammable, nonconductive formula is safe to use on or near live equipment while the pleasant lemon fragrance leaves the area clean and fresh smelling. This product contains no ozone depleters. 20 ounce can.

Always use in a well-ventilated area. Place protective paper or cloth absorbent media behind and under area to be cleaned to avoid over spray and to capture deposits being removed. Point special blasting nozzle and spray toward desired surface to be cleaned. Thoroughly saturate the targeted area with product allowing the high pressure solvent blast to remove material off surface and onto the absorbent media. Once surface is clean and dry, remove the soiled media.

Description

Areas of Use

Directions

43

43

• Clear, invisible• Anti-fog• Anti-static• Anti-fingerprint,• Anti-smudge• Anti-dust• Anti-scratch• Anti-lint

Product FeaturesReduces wear and scratching. Marks and Fingerprints on treated surfaces are easily wiped off - reduces maintenancetime. Leaves no gummy residue or film. Covers minute scratches, and harmless to surfaces normally surroundingscreens.

Recommended forComputer display terminals, CRT screens, electronic game Screens, remote terminal screens, TV screens, radarscreens, TV weather Board screens, tracking screens, recording chart covers, plastic masks, shields, helmets and visors(Fire Departments, Riot Squads, Divers, Industry).

SpecificationsOdor: odorlessColor: white foamSpray pattern: circular foamFlammability: Non-Flammable SprayPropellant: HydrocarbonSpray rate: 2.0 grams/sec.

Manufactured by Item #A110-1 LYN DISTRIBUTING965 North Redwood RoadNorth Salt Lake, UT 84054(801)295-5022 wats (800)366-5022 fax (801)295-5044E-mail: [email protected] WWW: http://www.lyndist.com

• Non-smearing• Non-irritating• Non-yellowing• Odorless• Non-abrasive• Non-acid• Contains no waxes• Anti-oils

CRT Screen Care

Micronic protective and repellent cleaner &coating

for all screens, glass & plastic.

44

44


45

45

DISINFECTANT FOAM CLEANER Ø Cleans, Disinfects, & Deodorizes Ø Quat Type Actives Ø Hospital Claims Plus HIV Ø Non-ammonicated, High Foam Ø Nonflammable, 360°spray Ø Pleasant Fresh and Clean Fragrance


Hospitals, nursing homes, medical centers, athletic clubs, school locker rooms, hotels, motels, restaurants, food processing and food preparation areas, cafeterias, apartment complexes, office buildings and complexes, employee rest areas, municipalities, jails.

Cleans, disinfects and deodorizes in one operation. No need to use a two step method. Kills Staph, Salmonella, Pseudomonas, and HIV-1 (AIDS Virus) on hard surfaces when used as directed. A versatile product that can be applied regularly without damage to tile, porcelain, ceramic, stainless steel and enameled surfaces. Contains no abrasives. Uses a fresh and clean fragrance along with a 3600 valve to spray in any position. 20 ounce can.

To disinfect hard non-porous surfaces (such as those listed above), proceed as indicated below: (1) SHAKE CAN BEFORE USING. (2) Hold six to eight inches from surface to be treated, (3) Spray area until it is covered with a white foam. Allow foam to penetrate and remain wet for 10 minutes. No scrubbing necessary. (4) Wipe off with a clean cloth, mop or sponge. The product will not leave grit or soap scum. For heavy soiled area, remove gross soil before treatment. *KILLS HIV-1 ON PRECLEANED ENVIRONMENTAL SURFACES/OBJECTS PREVIOUSLY SOILED WITH BLOOD/BODY FLUIDS in health care settings or other settings in which there is an expected likelihood of soiling on inanimate surfaces/objects with blood or body fluids, and in which the surfaces/objects likely to be soiled with blood or body fluids can be associated with the potential for transmission of human immunodeficiency virus Type 1 (HIV-1) (associated with AIDS) Contact Time: Leave surfaces wet for 10 minutes at 250C.

Description

Areas of Use

Directions

46

46

GENERAL INFORMATIONTHIS PRODUCT IS FOR SURFACE DISINFECTION, SURFACE DEODORIZATION, MILDEW CONTROL, AND AIRDEODORIZATION. THIS PRODUCT DISINFECTS HARD NON-POROUS SURFACES SUCH AS: FURNITURE,BATHROOM AND KITCHEN FIXTURES, FISHING EQUIPMENT & SPORTS EQUIPMENT, SUCH AS SKATE SHOESAND BOWLING SHOES. AIDS IN THE CONTROL OF ATHLETES FOOT FUNGI. CONTROLS Staphylococcus aureus,Salmonella choleraeusuis, Trichophyton interdigitale.

SPECIFICALLY DESIGNED TO CONTROL OF ODORS COMMONLY FOUND IN HOSPITALS, NURSING HOMESAND CLINICS.CONTROLS TB GERMS.

It can be used in hospitals, nursing homes, clinics, hotels, motels and general offices.

DIRECTIONS FOR USEMILDEW CONTROL AND SURFACE DISINFECTION: CLEAN SURFACE SPRAY FROM A DISTANCE OF ABOUT 8INCHES UNTIL SURFACE IS WET AND ALLOW TO DRY. REPEAT APPLICATION EVERY 21 DAYS FOR MILDEWCONTROL. FOR DEODORIZING THE AIR; SPRAY IN A SWEEPING MOTION UP AND TO THE CENTER 0F THEROOM FOR ABOUT 5 SECONDS. FOR DEODORIZING SURFACES: SPRAY DISINFECTANT FROM A DISTANCEOF ABOUT 10 INCHES ALLOWING SPRAY TO PENETRATE THE POROUS SURFACE TO BE TREATED.

TECHNICAL DATADISINFECTANT DEODORANT DELETERIOUS ACTION ONCLARITY : CLEAR FERROUS METALS : NONECOLOR : YELLOW NON-FERROUS METALS : NONEODOR : CITRUS FRAGRANCE GLASS : NONESPECIFIC GRAVITY : .882 PLASTIC : NONEpH : 9.8 @ 72°F FABRICS : NONE% SOLIDS : .77 PAINTED SURFACES : NONESOLIDS RESIDUE : TACKY CAKE TUBERCULOCIDALSPRAY PATTERN : CONICAL, FINE MIST FUNGICIDAL A.O.A.C. GERMICIDALPRESSURE : 75 PSI @ 70°F STAPHYLOCIDAL TESTS EMPLOYEDWATER SOLUBILITY : EXCELLENT PSUEDOMONICIDALRINSABILITY : EXCELLENT E.P.A. REGISTERED : NUMBER 9143-41FREE ALKALI : NONE U.S.D.A. MEAT ANU POULTRY APPROVEDPENETRATION : EXCELLENTODOR REPRESSENT : EXCELLENT

Manufactured forLYN DISTRIBUTING965 North Redwood RoadNorth Salt Lake, UT 84054(801)295-5022 WATS(800)366-5022 FAX(801)295-5044E-mail : [email protected] WWW : http://www.lyndist.com/

SURFACEDISINFECTANT

BactericidalStaphylocidal

TuberculocidalFungicidal

Spray

47

47

DRY MOLY LUBRICANT Ø Fast Drying Ø Withstands High Temperatures and Pressure Ø High Solids Ø Nonflammable Ø No Ozone Depleters


Automotive, oil field, marine, bakeries, mold releases, construction, mining, foundries, general maintenance, machine shops, plumbing, food processing, textile agricultural, printing, lumber, firearms, computer and manufacturing.

A unique formulation for use on surfaces that require lubrication without the after-effects of a wet, greasy residual film. Uses include conveyors, open gears, king pens, sliding surfaces, couplings, belts, pulleys, chains, etc. Also excellent for coating parts to prevent corrosion during shipping and yet have them lubricated and ready to assemble at thejob site. This is a molybdenum disulfide formulation which dries to a hard, black coating very quickly. It adheres to most all substrates, especially metal, with minimum surface preparation. It resists wear and abrasion, provides high lubricity, gives excellent extreme-pressure properties (up to 100,000 psi) and is stable at extreme temperatures, both high and low. Typical applications for this moly lubricant are chain lubricating, maintenance on furnaces, kilns, ovens, conveyors, gasket coatings, and mold release, etc. Very good anti-seize lubricant for head bolts, muffler clamps and pipe threads. Holds up under temperatures as high as 750°F 16 ounce can.

For best results apply to a dry, clean surface at room temperature. Shake very well until you hear the ball rattle in the can, then continue to shake for 30 seconds. Hold the can 6 to 8 inches from the surface and spray a thin even film. Avoid thick spraying, because it decreases effectiveness.

Description

Areas of Use

Directions

48

48

DUST MOP TREATMENT Ø Protects Ø Polishes


Applications for this product include restaurants, hotels, motels, industrial plants, cafeterias, hospitals, churches, nursing homes, department stores, grocery stores, schools, apartments and other institutions.

An economical, easy to use method of dust removal from any surface. Treat dust mops, cloths and soft bristle push brooms with a light, moist spraying of this product. Treated mops and cloths pick up dust just as a magnet picks up iron filings. Dust and dirt is not just pushed around but is held in the mop or cloth until a gentle shake releases it in the disposal area. Dusting with this product cleans and polishes furniture, painted plastic and formica surfaces. When replacing filters on heating and air conditioning systems spray the filters, thus reducing the amount of dust which again becomes airborne. 20 ounce can.

DUST MOPS: Spray dust mop until moist, never wet. Do not spray at the very ends. Shake mop vigorously to release dust. Renew by spraying lightly in center of mop. When mop head becomes excessively soiled, remove and wash in soapy solution, rinse and dry. CLOTHS: Spray dust cloth from about 6 inches by moving the spray rapidly across the cloth. Spray until moist, not wet. Retreat cloth lightly as needed. When cloths become dirty, they should be washed in soapy water, rinsed and dried.

Description

Areas of Use

Directions

49

49

FOG AWAY Ø Solvent Based Insecticide Fogger Ø Total Release Valve Treats up to 6,000 Cubic Feet Ø Contains Dual Synthetic Pyrethroids Ø Kills a Variety of Flying and Crawling Insects Ø Nonchlorinated, Non-Ozone Depleting


Schools, warehouses, theaters. F2 USDA rating.

A combination of two synthetic pyrethroids gives this total release lock down aerosol effectiveness against a wide range of flying and crawling insects, including the control of cockroaches. The special lock down valve allows the contents to be sprayed manually or automatically. One can treats up to 6,000 cubic feet. The formula has low residual odor. 16 ounce can.

Cover exposed foods, dishes and food handling equipment. Open cabinets and doors to area to be treated. Shut off fans and air conditioners. Put out all flames and pilot lights. Close doors and windows. Point valve opening away from face and eyes when releasing. Use one unit for each 6,000 cubic feet of unobstructed area. Do not remain in the area during treatment and ventilate thoroughly before reentry.

Description

Areas of Use

Directions

50

50

FURNITURE POLISH FOR WOOD Ø Gives Furniture a Deep Rich Luster that lasts and lasts Ø Combines the protection afforded by paste wax and the ease of an aerosol spray Ø Special wax base formulation with lemon oil


Applications for this product include restaurants, hotels, motels, industrial plants, office buildings, hospitals, nursing homes, department stores, grocery stores, schools, and other institutions.

A superior polish and cleaner that is made with the correct blend of waxes, lemon oil and cleaning agents that combines the protection afforded by paste wax and the ease of application of aerosols. This product polishes, cleans and dusts in one easy application with no hard buffing. Old wax build-up is removed at the same time leaving a deep gloss. The thick emulsion helps fill in minor scratches and nicks so that they blend in with the natural finish. It is used for quick cleaning and polishing of hard surfaces such as furniture, formica, woodwork, vinyl, brass, chrome, stainless steel, tile, marble, appliances including paneling, office machines, telephones, cabinets, and more. It may also be used to polish leather. The lemon oil and other lemon essences leave a lasting, refreshing fragrance. 20 ounce can.

SHAKE WELL BEFORE USING. Hold can upright, point valve opening towards and approximately 12 inches from surface to be polished. Spray sparingly. Let dry momentarily before polishing. Buff lightly before polish is completely dry with a dry clean cloth. A high luster will result.

Description

Areas of Use

Directions

51

51

FURNITURE POLISH PLUS

• Gives Furniture a Deep Rich Luster that Lasts and Lasts • Combines the protection afforded by paste wax and the ease of application aerosols • Special wax base formulation with lemon oil


Applications for this product include restaurants, hotels, motels, industrial plants, office buildings, hospitals, nursing homes, department stores, grocery stores, schools, and other institutions.

A superior polish and cleaner that is made with the correct blend of waxes, lemon oil and cleaning agents that combines the protection afforded by paste wax and the ease of application of aerosols. This product polishes, cleans and dusts in one easy application with no hard buffing. Old wax build-up is removed at the same time leaving a deep gloss. The thick emulsion helps fill in minor scratches and nicks so that they blend in with the natural finish. It is used for quick cleaning and polishing of hard surfaces such as furniture, formica, woodwork, vinyl, brass, chrome, stainless steel, tile, marble, appliances including paneling, office machines, telephones, cabinets, and more. It may also be used to polish leather. The lemon oil and other lemon essences leave a lasting, refreshing fragrance. 20 ounce can.

SHAKE WELL BEFORE USING. Hold can upright, point valve opening towards and approximately 12 inches from surface to be polished. Spray sparingly. Let dry momentarily before polishing. Buff lightly before polish is completely dry with a dry clean cloth. A high Iuster will resuIt.

Description

Areas of Use

Directions

52

52


53

53

2/03

• POWERFUL PINPOINT DIRECTIONAL SPRAY

• CONTAINS ODOR NEUTRALIZING AGENTS

• EXCELLENT CARPET PRE-SPOTTER FOR USE INCONJUNCTION WITH EXTRACTION EQUIPMENT

SPRAY ONand WATCHSPOTS and

STAINSDISAPPEAR

REMOVES:SOFT DRINKS • OIL • GREASE • BLOOD • KOOL AID • URINE • MUD

ALCOHOLIC BEVERAGES • KETCHUP • INK • COFFEE • TEA and MORE!

LYN DISTRIBUTING, INC.WEB SITE WWW.LYNDIST.COM PURCHASE ON LINE HERE MSDS Sheet Here

More Information e-mail [email protected] North Redwood Road, North Salt Lake, Utah 84054

Fax: 801-295-5044 • Call in USA: 800-366-5022 • Utah: 801-295-5022

REQUIRES NO RUBBINGEFFECTIVE ON BOTH WATER BASED & OIL BASED SOILS

PRODUCT NO. HEAVY DUTYCARPETSTAIN REMOVER

54

54




http://www.lyndist.com/msds_sheets/sec_aerosols/heavydutycarpetspot.pdf

Specifications

Features

For Use by For Use On

Description

aerosolproduct

datasheet

Appearance and Odor ................................................ Cloudy Liquid with Slight Alcohol OdorFlash Point of Concentrate ................................................. None to Boiling (212°F - T.O.C.)Flammability ...................................................................................... Non -Flammable SpraySpecific Gravity ............................................................................................................. 0.996Propellant ........................................................................................ Liquified Petroleum GasSpray Pattern ................................................................................................ Pin Point SprayNFPA Fire Rating ......................................................................................... Level 1 AerosolPackaging ................................................... 12 x 14oz. Net Wt. Cans per case (16oz. Cans)

POWERFUL PIN POINT SPRAYQUICK DISSOLVING ACTION

CONTAINS ODOR NEUTRALIZING AGENTSWILL NOT HARM MOST CARPET FIBERS OR DYES

(PRE-TESTING IS SUGGESTED)

HOTELS • MOTELS • HOSPITALSNURSING HOMES • RESTAURANTSOFFICE BUILDINGS • SHOWROOMS

RETAIL STORES • MEDICAL OFFICESNIGHT CLUBS • MOVIE THEATERS

BANKS • VEHICLE INTERIORS

COFFEE • TEA • URINESODA • KETCHUP • MUSTARD

COSMETICS • BLOOD • OIL • GREASEMUD • ALCOHOLIC BEVERAGES

CHOCOLATE • PETS STAINSMANY OTHER ORGANIC SOILS

HEAVY DUTY CARPETSTAIN REMOVER

A unique inverted spray aerosol spotter that removes water and oil based spots and stains fromcarpet and upholstery. Eliminates the need for rubbing and scrubbing. Leaves no visible residue.Will not harm carpet backing or upholstery foam. Neutralizes odors caused by stains. Excellentpre-spotter prior to carpet extraction. Inverted spray valve provides easy waist high application.

55

55

Non-flammable high power solvent that removes oil-based spots and stains from carpet and upholstery. Dissolves stains caused by grease, oil, paint, make-up, and other oil soluble soils. Concentrated stream allows product to be sprayed directly where needed for easy treatment of stains. Dries quickly leaving no residue or ring. Safe on most carpet fibers, backing, and padding. Note: All carpets, especially wool, should be tested to insure color fastness. Test on an inconspicuous area of carpet. For light colored and/or low pile carpet test for possible stain bleeding on a small portion of stain before proceeding. Stains created by acids, dyes or similar agents are generally permanent and may not be affected by this product. Stains previously treated with other chemicals may have been set and may not be removed by this product. Health Hazard Data: Contents under pressure. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120°F. Avoid contamination of food. Do not spray into eyes. KEEP OUT OF REACH OF CHILDREN. Spill Or Leakage Procedures: Do not flush to sewer. Absorb with suitable material and dispose of according to local, state and federal regulations. Aerosol cans when vented to atmospheric pressure through normal use, pose no disposal hazard. Wt./20 oz. can: 20 Ounces

Lyn Distributing 965 North Redwood Road North Salt Lake, Utah 84054

Phone (801) 295-5022 Outside Salt Lake Area 1-800-366-5022

Carpet Spot RemoverSolvent Based

Use on heavy oil or grease spots.

Removes tar and asphalt from carpet.

56

56

PRODUCT NO.

1/03

• Dries Fast• Moisturizes• Greaseless• Sanitary Aerosol• Hypo-Allergenic

with Lanolinand Aloe Vera

• Water alone will not remove protection

• Protects against irritation from Alkalies, Acids, Inks, Epoxies,

Resins, Greases, Paints, Fiberglass Fibers

• Allows hands to flex and breathe

• Gives touch and feeling sensitivity not obtainable with gloves

• Authorized by U.S.D.A.

Lyn Distributing, Inc.Web Site www.Lyndist.com Purchase online here MSDS Sheet Here

More Information e-mail to [email protected] North Redwood Road, North Salt Lake, Utah 84054

Fax: 801-295-5044 • Call in USA: 800-366-5022 • Utah: 801-295-5022

Protective Emollient Foam

INVISIBLEGLOVE

Coats Skin with an Invisible Barrier

57

57



http://www.lyndist.com/msds_sheets/sec_aerosols/invisibleglove.PDF


Specifications

Features

For Use by

A unique invisible skin protectant that features the moisturizing power of aloe vera and lanolin. Allowsskin to flex and breathe while being protected. Forms a highly resistant barrier between skin and dirt,oil, grease, solvents, paints, fiberglass fibers, resins, alkalies, acids, inks, tar and shop grime. Excellentwhen working with small parts where gloves may be burdensome. Helps prevent reactions causedby latex sensitivity. One application protects for up to four hours.

Description

aerosolproduct

datasheet

Appearance and Odor ............................................................ White Foam, Perfumed ScentFlash Point of Concentrate .................................................. None to boiling (~212°F - T.O.C)Flammability ....................................................................................... Non-Flammable SpraySpecific Gravity ............................................................................................................... 1.00Propellant ........................................................................................ Liquified Petroleum GasSpray Pattern ...................................................................................................... Thick FoamNFPA Fire Rating .......................................................................................... Level 1 AerosolPackaging ................................................... 12 x 14oz. Net Wt. Cans per case (16oz. Cans)

INDUSTRIAL WORKERSCHEMICAL WORKERS

PRINTERS • CRAFTPERSONSPLUMBERS • PAINTERS

SERVICEPERSONSNURSES

SANITARY AEROSOLPROTECTS FOR UP TO FOUR HOURS

SMOOTH CREAM • ALLOWS SKIN TO BREATHEHYPO-ALLERGENIC • GREASELESS

AUTHORIZED BY USDA

InvisibleGloveProtective Emollient Foam

58

58

GENERAL INFORMATIONTHIS GENERAL PURPOSE INSECT REPELLENT IS FOR PROTECTION AGAINST MOSQUITOES, BITING FLIES,GNATS, AND FLEAS. FOR PROTECTION AGAINST MOSQUITOES AND BITING FLIES, PAY SPECIAL ATTENTIONTO WHERE BITING THROUGH CLOTHES OCCURS – SHOULDERS, ELBOWS, SEAT OF TROUSERS, FRONT OFTROUSERS, FRONT OF THIGHS, KNEES AND SOCKS. FOR PROTECTION AGAINST CHIGGERS (MITES), FLEASAND TICKS. PAY SPECIAL ATTENTION TO THE SOCKS, SHOE TOPS AND FLY, TROUSER LEG CUFFS,TROUSER FLY AND WAISTBAND, FRONT FLY AND CUFF OF THE SHIRT. THIS PRODUCT IS FOR PERSONALAPPLICATION AND CLOTHING. IT IS FOR EXTERNAL USE ONLY!

DIRECTIONS FOR USESKIN APPLICATION FOR MOSQUITOES, BITING FLIES, GNATS, AND FLEAS. HOLD UNIT 4 TO 6 INCHES FROMTHE SKIN OF ARMS OR LEGS WHILE APPLYING WITH A SLOW SWEEPING MOTION UNTIL SURFACE ISSLIGHTLY MOISTENED, RUB WITH HAND TO INSURE EVEN DISTRIBUTION. TO APPLY TO FACE AND NECK,SPRAY IN PALM OF HAND IN SHORT BURSTS AND SPREAD ON THE SKIN. DO NOT SPRAY DIRECTLY ONFACE.

TECHNICAL DATA TYPE PRODUCT: AEROSOL INSECT REPELLENT VISCOSITY : 10 CPSCLARITY : CLEAR RESIDUAL STRENGTH: EXCELLENTCOLOR : COLORLESS DELETERIOUS ACTIONON:ODOR : SPICE METALS : NEGATIVESPECIFIC GRAVITY : .842 GOGGLES : POSITIVESPRAY PATTERN : FINE WET MIST WATCH CRYSTALS : POSITIVEWATER SOLUBILITY : PARTIAL FABRICS : NEGATIVERINSABILITY : GOOD -50569 PLASTICS : POSITIVEE P A REGISTERED : 9143-38-50569 GLASS : NEGATiVERiPEENT STRENGTH : EXCELLENTREFRACTIVE INDEX : 1.3638PRESSURE : 50 PSI @ 90°F

FORMULATION:N,N-DIETHYL-METATOLUAMIDE : 14.25%. OTHER DIETHYL TOLUAMIDES :.75%DICHLORODIFLUOROMETHANE, TRICHLOROMONOFLUOROMETHANE, ETHANOL : 85.00%.

Manufactured forLYN DISTRIBUTING965 North Redwood RoadNorth Salt Lake, UT 84054E-mail : [email protected] WWW : http://www.lyndist.com/

INSECTREPELLENT

59

59

BLASTER INSECT SPRAY Ø Water based natural pyrethrin formula Ø Dual synergized actives Ø Blasting nozzle for increased contact kill effectiveness Ø Effective against many flying and crawling insects

Manufactured by LYN DISTRIBUTING 965 North Redwood Road North Salt Lake, UT 84054 (801) 295-5022 WATS (800)366-5022 FAX (801)295-5044 E-mail : [email protected] WWW http://www.lyndist.com/

Applications for this product are found in both food and non-food areas of warehouses, food processing plants, motels, hotels, theaters, schools, offices, land and most any industrial and institutional area.

This all purpose space spray[contact killer utilizes 0.30% natural pyrethrins combined with dual synergists for excellent knockdown of a wide variety of both flying and crawling insects. The unique product features a blasting actuator that is an easy-to-use yet forceful spray control for wide areas such as baseboards, for recessed areas such as cracks and crevices, to kill wasps and hornets, as well as for room fogging.

To kill Flies, Mosquitoes, Gnats, Wasps, Hornets : Close doors and windows and spray toward upper corners of room. Keep valve depressed, so as to thoroughly mist the room (6-7 seconds per 1,000 cubic ft.). Leave room closed for 15 minutes, after which doors and windows may be opened. To kill Roaches, Water Beetles, Silverfish, Crickets, Ants: Spray baseboards, cracks, crevices, moist areas, and openings around sinks and pipes and other hiding places, hitting the insects directly. Spray ant hill and ant trails over windows and door sills and other locations. Repeat as necessary for control.

Description

Areas of Use

Directions

60

60

Removes: • Crayons, Ball-point Ink • Lipstick, Many Others


Municipalities, government agencies, highway departments, utilities, post offices, schools, universities, bus fleets, building and ground superintendents, apartment complexes, factories in high risk areas, train and bus depots, airports.

A vandalism mark remover similar to our regular vandal remover, only jelled for longer contact on vertical surfaces. Use this one on heavy duty stains where longer working time is needed. Safe to use on glazed or ceramic tile, cinder block, glass or bare metal. Be careful when using on baked enamel surfaces, do not allow to stand longer than one minute. Do not use on ordinary painted surfaces—product will attack the paint. May be wiped off or washed off with detergent and water. 16 ounce can.

Shake well before using. Spray on surface to be cleaned and wipe off with a clean cloth. In stubborn cases, repeat the application and allow the product to set for 15 to 30 seconds so the chemicals can work. Before using on synthetic surfaces such as plastic, rubber, asphalt or others, spray in hidden area and test.

Description

Areas of Use

Directions

61

61

MOISTURE GUARD

• Nonflammable • 4-N-1 Penetrating Oil • Lubricates (Contains P.T.F.E.) • Excellent Rust-Buster • Displaces Water • Prevents Corrosion


Areas of Use Automotive, machine shops, oil fields, fishing, firearms, printing, food processing, mining, construction, textile, manufacturing, marine, HVAC, electrical, lumber, agricultural, plumbing, refineries, and general maintenance and lubrication.

Description This nonflammable lubricant is a combination of special water displacement compounds, corrosion inhibitors, solvents, nongreasy lubricants, and P.T.F.E. It is used to displace water and moisture from electrical equipment such as contact points and automotive distributors, machinery parts, guns and equipment. This lubricant is used by factories, truck lines, delivery services, transit systems, schools, machine shops, service stations, air lines, air maintenance shops and general industries. Contains no ozone depleters.

Directions Keep actuator pointed towards dot on valve cup. Remove cap. Direct spray toward area to be treated and spray liberally until all moisture is rinsed away. This will also leave a protective coating to repel moisture. Repeat as needed. Can also be used to loosen rusty nuts and bolts.

62

62


63

63

q Heavy-bodied; designed for on-the-spot lubrication of truck fifth wheels q Works under all weather conditions q Special additives prevent squeezing out under loads up to 40,000 lbs. q Contains exclusive antioxidants for rust and corrosion protection. q Lubricates and Protects even under water. q Continuously recoats metal on each revolution.

A heavy duty, highly adherent lubricant and rust preventive, protective coating – suitable for all weather conditions. Prevents metal to metal contact under extreme pressures. Penetrates wire rope and cable. Strong metal adhesiveness prevents loss by washing of water or balling tendency of dust.

Applications: Heavy-duty construction and conveyance equipment such as cranes, elevators, hoists, cables, chains, springs, drag lines, slide racks, pins, screws, fifth wheels, tracks. Trash collection and street cleaning machines. Automatic car wash conveyors. Marine cables and winches. Metal working presses. DANGER: Contains petroleum distillates. Extremely flammable. Use only in a well ventilated area. Do not use near heat, sparks, open flame or other sources of ignition. Do not smoke in use area. Harmful or fatal in swallowed. . Do not take internally. If swallowed, do not induce vomiting. Call physician immediately. Contents under pressure. Do not puncture or incinerate container. Do not expose to heat or flame. Color: Black. Odor: Mild Petroleum. General Appearance: Opaque, Tacky Liquid

Lyn Distributing 965 North Redwood Road North Salt Lake, Utah 84054 Phone 801-295-5022 Outside Salt Lake Area 1-800-366-5022 Fax 801-295-5044 Web Address http://www.lyndist.com Email to: [email protected]

64

64

• Institutional Strength • Caustic Formula • Spray On, Wipe Off


Restaurant & fast food establishments, hospitals, nursing homes, apartment complexes, schools, colleges, supermarkets & supermarket deli areas, caterers, housing authorities, country clubs, churches, day care facilities, bakers, bowling alleys, fraternal organizations.

This heavy duty formula cleans fast in both warm and cold ovens, yet is pleasant and easy to use. Formulated for hard-to-clean institutional ovens and cooking utensils such as pots, pans, french fry baskets, rotisseries, outdoor grills, etc. It also cleans stainless steel to a bright new luster. Do not allow cleaner to remain on asphalt tile or aluminum. 20 ounce can.

SHAKE WELL. From a distance of 9 to 12 inches spray a liberal amount of this cleaner on the surface. Allow the chemicals to set for 5 to 10 minutes on warm surfaces and 10 to 20 minutes on cool surfaces. Repeat the process in cases of heavy caking. This cleaner works equally well on warm or cold surfaces. Do not spray on asphalt, tile or painted surfaces, linoleum or aluminum. Do not spray on electrical connections. Turn off current in electric ovens and pilot lights in gas ovens. With a paper towel or clean cloth wipe the surface clean. After removing cleaner, wash surface with potable water to remove all remaining cleaner.

Description

Areas of Use

Directions

65

65

PAINT, GASKET & DECAL REMOVER

• Versatile 3-in-1 Product • Powerful solvent performance • Spray on, scrape or flush off • Contains no ozone depleters


This product has many areas of use including paint and body shops, auto and fleet maintenance facilities, wood restoration and refinishing, metal treating and coating, and more.

This unique aerosol is a fast-acting, easy-to-use stripper that can strip paint, gaskets, and decals- all in one product. It is even effective on varnish, adhesive, and contact cement. As a gasket remover, it is effective on all types of gaskets including fiber compound, silicone, and most rubber materials. The high concentration of powerful solvents makes this product more effective than most competitive brands while still gentle enough to be used on wood without raising the grain. The thick gel material will cling to vertical surfaces or overhead areas without running off. The product contains no ozone depleters. 16 ounce can.

TO REMOVE PAINT: Prepare the surface by removing dirt, grease, and oil, and allow surface to dry. Hold can 8-10 inches from surfaceand coat liberally. Allow gel to remain until entire surface is blistered (dwell time varies but usually 3-10 minutes). Scrape or flush off with water the loosened paint. For heavy coats, it may be necessary to allow additional dwell time and/or multiple applications. To remove paint only but not primer, reduce dwell time. TO REMOVE GASKETS: Clear away disassembled parts from gasket area. Preparesurface by scraping or wire brushing away any loose material. Remove debris, grease, and oil, and allow to dry. Hold can 4-6 inches and liberally coat gasket completely with gel material but do not overspray (it may be necessary to mask or shield surfaces without gasket material). Allow several minutes to penetrate and separate. Scrape away material and remove any residual gel with water or cleaning solvent. TO REMOVE DECALS: Hold can 4-6 inches and spray just the decal area. Be sure to spray only the decal and eithermask or shield other areas and/or quickly remove gel from adjoining surfaces. After one minute, begin trying to remove decal. Do not allow gel material to remain in contact with decal or surface for more than two minutes to prevent damage to the surface beneath the decal. Reapply as necessary per these instructions. Upon decal removal, remove gel material with water or cleaning solvent.

Description

Areas of Use

Directions

66

66

PUNCH Heavy Duty Industrial Foam Cleaner & Degreaser

A unique aerosol foam which enables simple and easy cleanup of tools, parts, workbenches, vent covers, machinery, coils, industrial equipment, concrete and more! Sprays as an engulfing, heavy duty foam that clings to surfaces and provides extended cleaning contact time. Contains super powerful, water soluble, grease dissolving agents and detergents for instant "mega-forceful" cleaning action. Provides a self indicating foam that quickly breaks down grease and grime and becomes dirty indicating soils is ready to be flushed away. Deodorizes as it cleans, leaving the area with a fresh citrus scent.

SUPER POWERFUL GREASE DISSOLVING ACTION BIODEGRADABLE •• NON-FLAMMABLE

FOR USE BY INDUSTRIAL PLANTS •• CHEMICAL PLANTS •• REFINERIES •• SHIPYARDS ••

POWER GENERATING PLANTS •• STEEL MILLS •• FOOD and BOTTLING PLANTS •• CONSTRUCTION INDUSTRIES •• PETROLEUM INDUSTRY ••

GENERAL MAINTENANCE

FOR USE ON LAWN EQUIPMENT •• GUTTERS •• AIR CONDITIONING COILS •• FARM and ROAD EQUIPMENT •• TANKS •• PIPING •• DUCTS •• TRUCKS •• TRAILERS ••

SIGNS •• FANS •• BOATS •• DOCKS •• OIL RIGS •• DAIRY EQUIPMENT

UNIQUE " FOAM GUN " SPRAY THAT PRODUCES A THICK CLINGING ENGULFING FOAM THAT BREAKS DOWN GREASE AND DIRTY GRIME.

Appearance and Odor White Foam, Citrus OdorFlash Point of Concentrate 125°FFlammability Non-Flammable SpraySpecific Gravity .997Spray Pattern Foam DelugeNFPA Fire Rating Level 1 AerosolPackaging 12 X 20 oz. Liquid cans 16 oz. Net Wt.

www.lyndist.com

Lyn Distributing 965 North Redwood Road North Salt Lake, Utah 84054 Phone in Salt Lake Area 1-801-295-5022 Out Side Salt Lake Area 1-800-366-5022

67

67

FEATURES:• Holds up under EXTREME temperatures (500°°F). Adheres to hot metal surfaces. Will not run or liquify under

heat. Resistant to Low Temperatures -40-F.• Holds up under EXTREME pressures and high shock loads.• Not washed away by water or steam.. Lubricates in the presence of water.• Resists acids, oxidation, dust, dirt, salt spray. Prevents corrosion on metal surfaces.• Shelf Life (500 hrs. min.)• Cleans and displaces old and contaminated lubricant. Penetrates deeply into difficult to lubricate surfaces.

BENEFITS• Reduces Frequency of Lubrication• Extends Operational Life of Equipment• Lowers Labor Costs for Greasing Operations• Reduces Machine Downtime

CONSTRUCTION EQUIPMENTWire Rope, Conveyor Chains, Chassis, Chain Drives, Open Gears, Fifth Wheels, Linkages and Draglines.

WATER & SEWAGE PLANTSMore sustained and enduring lubrication and corrosion prevention for Water Meters. Fittings Threads. Valves. Pumps

MARINEDredqes, Tugboats, Ships, Open Gears, Wire Rope & Cable, Fittings, Valves, Pumps, Winches, Dockside Cranes, Off-shore Drill Rigs.

INDUSTRIAL.Conveyor Chains. Cams, Slides. Exposed Gears. Valves. Hose Couplings. Hoists. Pulleys, Fork Lifts. Rollers Presses

TECHNICAL SPECSFlammability - None Shear Stability - 200kgDrop Point - 570°F Life Performance – 500+hrsUnworked Penetration - 265-295 Low Temp Limit - -40°F

Manufactured for :LYN DISTRIBUTING965 North Redwood RoadNorth Salt Lake, UT 84054(801)295-5022 WATS(800)366-5022 FAX(801)295-5044E-mail : [email protected] WWW : http://www.lyndist.com/

RED SPRAYGREASE

A non-flammable broad use range penetratingliquid that air cures to an extra heavy duty, thick

high temperature, extreme pressure grease.

68

68

SUPER RED 600°°F RTV SILICONE

HIGH HEAT 400°°F BLUE SILICONE

BLACK RTV SILICONE


69

69

AREAS OF APPLICATION INDUSTRIAL MACHINERY NUTS • BOLTS MACHINE SHOPS CORRODED PARTS HOMES DOOR HINGES CARS LOCKS TRUCKS WIRE CABLE OIL RIGS MACHINE PARTS HOTELS MOTELS

TECHNICAL DATA FORM: Solvent Base Aerosol FLASH POINT: 110° F TCC ODOR: Sweet FLAME EXTENSION: 18" COLOR: Amber SOLUBILITY IN WATER: 0% DETERGENCY: None SPECIFIC GRAVITY: 0.8 TOXICITY: 500 ppm OSHA TLV % VOLATILE BY VOLUME: 60% WETTING ABILITY: Saturates pH: None STORAGE STABILITY: 1 year + PROPELLENT: Hydrocarbon COLD STABILITY: 0° F EVAPORATION RATE: Slow PHOSPHATES: None BIODEGRADABILITY: No Rust-Solv is a USDA authorized greaseless lubricant for general use. Contains a light mineral oil in a petroleum distillate base with a corrosion preventative for long lasting protection. Cleans, lubricates, penetrates and prevents rust giving four-way protection.

Lyn Distributing 965 North Redwood Road North Salt Lake, Utah 84054 Phone (801) 295-5022 Outside Salt Lake Area 1-800-366-5022 web page www.lyndist.com

Sprays

70

70

General information This product is a general-purpose dry lubricant which stops sticking of drawers, windows, doors. Screens, zippers, locks, and other metal surfaces. Eliminates annoying squeaks in hinges, latches, springs, etc. Stops car doors, locks and trunk moldings from sticking. It helps prevent grass, dirt and mud from sticking to lawn mowers. Use on metal, glass, rubber, plastic, painted finishes and fabrics. This lubricant dries fast. It leaves no greasy or oily film and is heat stable. It will not freeze or melt & is not affected by water, oil or solvents. It can be used in manufacturing plants, bottling plants, packing plants, schools, institutions, car dealerships, cabinet shops, service stations, and general industry. Directions for use Shake well - thoroughly clean surfaces to be sprayed. Spray a light film with a sweep motion. When used on sticking surfaces, work object back and forth. Spray again if necessary. Technical data Type product: aerosol dry lubricant lubricating qualities: excellent Clarity: clear penetration: excellent Color: colorless retards corrosion Odor: mild oily film: none Specific gravity: .970 friction-free % solids: 50% stainless Solids residue: clear viscous liquid @ 72°f waxless Spray pattern: fine, conical mist heat and cold stable Pressure: 38 psi @ 72*f non-conductive U.S.D.A. Meat and poultry approved deleterious action on Water solubility: none ferrous metals: none Viscosity: medium non-ferrous metals: none Drying time: 2 to 3 minutes glass: none Leveling: excellent plastic: none

fabrics: none Manufactured by LYN DISTRIBUTING 965 North Redwood Road North Salt Lake, UT 84054 (801)295-5022 wats (800)366-5022 fax (801)295-5044 E-mail : [email protected] WWW : http://www.lyndist.com

71

71

SPRAY ADHESIVE • Medium Solids • Fast Tack, Quick Adhesion • Temporary or Permanent Bonds • Waterproof and Nonstaining • Nonchlorinated and Non-Ozone Depleting


This versatile adhesive may also be used in upholstery shops, auto upholstery, marinas, sheet metal shops, leather shops, foam shops, labeling (cardboard), hotels, motels (carpet and wallpaper repair) and in the specialized industry of asbestos abatement. This product can be successfully marketed in any industry where strong permanent or temporary adhesion is applicable.

This wide web spray adhesive provides a combination of versatility and performance for the most demanding applications. The medium solids, translucent formula is excellent for use on uneven or porous surfaces and will adhere to a variety of materials including plastics, polyethylene sheeting, wood, corrugated, paper, cork, fiberboard, insulation, rubber, cloth, leather, and more. Waterproof, flexible, and non-staining, this product can be used for both temporary and permanent bonds. Formulated with the environment in mind, this product contains no chlorinated solvents or ozone depleters. Non intended for use on vinyls. 20 ounce can.

Always shake well before using. Never aim valve at face. Hold can upright and apply adhesive in a side to side motion 10 to 14 inches from surface. TEMPORARY BONDS: Spray surface, allow to tack and apply material to be bonded. PERMANENT BONDS: Liberally spray both surface and material, allow to tack, then apply.

Description

Areas of Use

Directions

72

72

SPRAY DE-ICER

• Removes: Ice, Snow and Frost • Prevents Refreezing


Any fleet operator, taxi cab companies, concrete truck operators, city and county garages and bus barns. Apartment and motel operators to unthaw door locks. City departments to unthaw locks on gates and fences.

A push of the button removes ice, snow, frost and prevents refreezing on windshields, windows and headlights. Thaws frozen door locks. Will not harm plexiglass. paint. metal or rubber. This fast acting formula works very well in the removal of ice and frost from aircraft wings, propellers, windshields and fuselages while on the ground. Also deters ice formation and buildup while in the air. 20 ounce can.

Removing Ice and Frost: Spray liberal amount of ice melt on surface to be cleaned. On windshields, turn on wipers for quicker action, on other surfaces rub lightly. Thawing Frozen Locks: Hold can upright and spray into lock. Wait 30 seconds and try key. To prevent future freezing use once a week.

Description

Areas of Use

Directions

73

73

Description The blend of special cleaners and polish oils is ideal for use on brushed and high gloss metal surfaces. This product was specifically designed to use on stainless steel and most other metal surfaces such as chromium, aluminum, zinc, mild steel, brass, copper and silver. When used on these surfaces in accordance with the directions, this cleaner restores a “like new” brilliant shine and leaves a protective coat to help retard tarnishing. The pleasant lemon fragranced product does not contain any abrasives which might mar the finish.

Areas of Use Applications for this product include restaurants, hotels, motels, industrial plants, dairies, cafeterias, office buildings, elevators, hospitals, nursing homes, department stores, grocery stores, schools and other institutions. 20 ounce can. Directions For best results, apply with a clean cloth, damp or dry. Spray stainless steel polish directly on surface or cloth. Rub briskly on surface, working with the grain if possible. Use sparingly...a little goes a long way. Polish surface with a clean dry cloth. Allow up to 5 minutes to dry before using surface. Item # A163-1

LYN DISTRIBUTING 965 North Redwood Road North Salt Lake, UT 84054 (801) 295-5022 WATS (800)366-5022 FAX (801)295-5044 E-mail: [email protected] http://www.lyndist.com

• Cleans Deposits, Restores Luster • Contains No Chlorinated Solvents and Protects Surface or Ozone Depleters • Use Also on Chrome, Aluminum, Steel, • Pleasant Lemon Fragrance Brass, Copper and More • High Gloss Oil Based Formula

74

74

PAINLESS STAINLESS

• Cleans Deposits, Polishes Metal, and Protects Surface • Use Also on Chrome, Formica, Copper, Aluminum, Brass, Steel and More • Contains No Chlorinated Solvents or Ozone Depleters • Nongreasy, Water Based Formula • Pleasant Lemon Fragrance


Applications for this product include restaurants, hotels, motels, industrial plants, dairies, cafeterias, office buildings, elevators, hospitals, nursing homes, department stores, grocery stores, schools and other institutions.

This product is a water-based formula used for cleaning and polishing stainless steel, chrome, formica, copper, aluminum, brass, and other hard surfaces. It is a water-in-oil emulsion, where the oil surrounds the water and contacts the surface to be cleaned first. This allows the product to act like a solvent (oil based) system while not having it’s oiliness or flammability. This product is ideally suited for use in food preparation areas, where the odor of mineral spirits and aromatic solvents would be objectionable. This pleasantly fragranced product cuts through grease and oil while leaving a protective shine.

Shake well before using. Spray sparingly over surface. Wipe clean with a dry cloth, turning often. For heavy deposits, allow foam to remain up to a minute before wiping. Polish to a high shine with a different CLEAN dry cloth.

Description

Areas of Use

Directions

75

75

SUPER SOLVENT

• High Solvency Cleaning Power • Leaves No Residue, Dries Fast • Non-Ozone Depleting: No CFC’s or HCFC’s • Nonconductive to 29,000 Volts • Nonflammable and Low Odor • Dual Action Spray - Mist/Blast


Automotive, machine shops, printing equipment, refineries, construction, oil field, lumber, abatement, silkscreen, schools, custodial, marine, manufacturing, food processing, HVAC, electrical.

This product is one of the most powerful industrial solvent cleaners available. It is fast drying, nonflammable, nonconductive, and completely non-ozone depleting. The low odor formulation leaves no residue and does not contain methylene chloride. A unique feature of is the special dual action valving system which allows for both a misting spray for broad area degreasing and a blasting spray for hard to reach areas and extra deposit removal power. Use this product to remove grease, oil, dirt, and other deposits from electric motors, power equipment, printing presses, conveyor/escalators, and virtually any metal equipment or parts cleaning. While excellent as a multi-purpose industrial cleaner, it has the advantage of dielectric strength for use on live electrical equipment. As with most chlorinated solvent based products, it will affect certain plastics and rubbers. Always test in an inconspicuous area to check product for compatibility.

Remove cap and point actuator toward surface to be cleaned. MIST SPRAY: Place finger on top of actuator and press down to mist broad surfaces to be cleaned. Saturate to desired level. BLAST SPRAY: Place finger behind actuator and push forward for blast/stream spray into nooks and crannies or for extra power on stubborn deposits on any area. Allow solvent to remain in contact for thirty seconds to one minute and then wipe or air dry. Repeat as necessary to achieve desired results. Extra heavy deposits may require brushing. Check to be sure bristles are compatible with the solvent before using. NOTE: This product is nonflammable and nonconductive and therefore can be used while equipment is operating.

Description

Areas of Use

Directions

76

76

7/02

100% SOLVENT BASED FORMULATION PROVIDESSUPERIOR INSECT EXOSKELETON PENETRATION AND KILL

Dielectric Breakdown Voltage25,000 Volts by ASTM Test Method D-877

with INSTANT FREEZING ACTION

SprayWasp & Hornet Killer

• Features a powerful 20 foot spray• Treats entire nests - ends re-infestation• Super high pressure, non-flammable spray• Sprays at same pressure throughout can life• Provides instant freeze action for quick knockdown

Shootsa 20-footfoggingstream

LYN DISTRIBUTING, INC.Web Site www.LynDist.com Purchase on line Here MSDS Sheet Here

More Informatiion e-mail to [email protected] North Redwood Road, North Salt Lake, Utah 84054

Fax: 801-295-5044 • Call In USA 800-366-5022 • Utah: 801-295-5022

PRODUCT # A124-177

77




http://www.lyndist.com/msds_sheets/sec_aerosols/wasp_hornet_spray.PDF

Appearance and Odor .......................... Transparent Oily Liquid, Solvent / Insecticide OdorFlash Point of Concentrate ...................................................................................... ~100°FAerosol Flammability ........................................................................Non-Flammable SpraySpecific Gravity of Concentrate ..................................................................................0.826Propellant .................................................................................... 1,1,1,2-TetrafluoroethaneSpray Pattern .............................................................................. 20 Foot Fogging StreamNFPA Fire Rating ....................................................................................... Level 3 AerosolPackaging ...........................................12 X 14 oz. Net Wt. cans per case (20 oz. can size)

Specifications

20 Foot Spray25,000 Volt Dielectric Strength

Constant can pressure from start to finish100% solvent based

Super Freezing Spray

Features

For Use byWasps • HornetsNests OutdoorsNests Indoors

Chimneys • Cracks • CrevicesOverhangs • Car Ports • Tree Nests

For Use On

Spray Wasp & Hornet Killer is a powerful 100% solvent based Tetramethrin aerosol insecticide.The product features a unique propellant and aerosol valve system that delivers a super powerful20 foot fogging stream. Sprays at the same pressure throughout the life of the can. High dielectricbreakdown voltage of 25,000 volts. This formula is totally unique. No other EPA registered productof this kind is available. The spray force and kill effectiveness are simply unbeatable. Try it andsee for yourself! You'll soon understand why we feel this is the best aerosol Wasp and HornetKiller money can by!

Description

aerosol product data sheet

Electrical Power and Telephone CrewsHotels • Motels • Schools

Commercial Buildings • Warehouses • TheatersRestaurants • Manufacturing Plants

Office Buildings • Hospitals Apartment Buildings • MunicipalitiesParks and Recreation Departments

SprayWasp & Hornet Killer

78

78

WATERLESS HAND CLEANER

• Effective When Removing Grease, Tar, Oil, Ink and Paint

• Conditions as it Cleans • Use With or Without Water • Convenient Package & Application


Printing shops, industrial plants, automobile shops, construction, oilfield workers, refineries, airports, gas stations, asphalt companies and wherever a waterless hand cleaner is needed.

Specially formulated to deep clean tough grease, ink, tar, paint and dirt from hands without drying. The aerosol packaging allows for convenient application and handling. Can be used by mechanics, oilfield personnel, machinists, printers and painters.

Shake well before using. Apply product to the palm of hand. Rub hands together, being sure to work the hand cleaner between fingers and under nails. Wipe off with towel or rag. With water, wet hands prior to application and continue as instructed above. Rinse hands after use. When used with water, this product creates a rich lather. CAUTION: Keep out of reach of children. Contents under pressure. Do not use or store near heat or open flame. Exposure to temperatures above 120° F may cause bursting. Never throw container into fire or incinerator.

Description

Areas of Use

Directions

79

79

WHITE LITHIUM GREASE

• Lubricates & Reduces Friction • Fortified with PTFE • Prevents Rust & Corrosion • Nonchlorinated


Applications for this product can be found in the packaging industry, automotive field, marine and aircraft maintenance. Additional markets can be found in general industrial maintenance facilities.

This product is white lithium grease in a convenient, easy-to-use aerosol can. It is an exceptional coating for the prevention of rust and corrosion. In addition, this PTFE fortified, durable, nonstaining lubricant provides superior friction reduction between similar or different materials than other competing brands. Will not melt, run, wash off, or freeze and does not gum or cake. Use this product on battery terminals, brake cables, distributor caps, latches, hinges, bolts, locks, antennas, equipment, tools, tracks, glides, bearings, rollers, buckles, shackles, winch gears, and other external moving parts or exposed surfaces. This next generation product is formulated without chlorinated solvents or ozone depleters.

SHAKE WELL BEFORE USING. ALWAYS HOLD CAN UPSIDE DOWN AND SPRAY FOR TWO SECONDS AFTER EACH USE TO PREVENT SPRAY TIP FROM CLOGGING. Hold can 6-10 inches from surface to be lubricated and spray liberally. For hard-to-reach areas, insert extension tube provided.

Description

Areas of Use

Directions

80

80

Red Infectious Waste Bags

Red Infectious Waste Bags are guaranteed to provide film impact resistance greater than 165 grams and film tear strength greater than 480 grams

when tested in accordance with ASTM D- 1922-94a and ASTM D-1709-97. All film colorants are non-metallic. Red Infectious Waste Bags are printed with a six inch diameter Biohazard Symbol and warning message in

English and Spanish. All printing is in black ink, one side, random repeat. Red Infectious Waste Bags are supplied with a STAR SEAL bottom and are packed in rugged, white corrugated

cartons. Certified to meet the 480 gram tear strength standard (ASTM D1922-00A) as required by D.O.T. Reg. 173.197

for transportation of regulated medical waste.

Yellow Infectious Linen Bags

Printed with a six-inch Biohazard symbol and warning message in English and Spanish printed on each Yellow Infectious Linen Bag .

Printing on each Yellow Infectious Linen Bag is in black ink, one side, random repeat. All Yellow Infectious Linen Bags are supplied with a STAR SEAL bottom

Yellow Infectious Linen Bags On Rolls have 25 Bags per roll 6 to 8 rolls per case. Yellow Infectious Linen Bags On Rolls are packed in rugged, white corrugated cartons.

Meets Federal and State regulations for tear resistance of 480 grams (ASTM D1922-94a) and impact resistance of 165 grams (ASTM D1709-97) Warnings are printed in both English and Spanish. Yellow Infectious Linen

Bags come in 20-32 gallon and 40 - 44 gallon sizes and both in 1.3 mil. thickness and are DOT approved. Special virgin resin plastic allows for these hazardous waste heavy duty yellow bags to resist punctures, tears and abrasions, while labeling what is in the hamper or trash can. They are safe for incineration and have been

tested for load capacity and seal integrity.

Red Infectious Waste Bags LLD Flat Pack or Rolls Printed IW2423R 10 Gallon 24" X 24" Red Infectious Bags 1.2 mil 250/case IW2432R 15 Gallon 24" X 32" Red Infectious Bags 1.2 mil 250/case IW3339R 30-33 Gallon 33"X40" Red Infectious Bags 1.2 mil 100/case IW4046R 40 - 45 Gallon 40"X47" Red Infectious Bags 1.2 mil 100/case IW3043RLR 30-33 Gallon 30" X 43"Red Infectious Bags 1.3 Mil 200/case 8 rolls of 25 IW3043R3 30 Gallon 30.5" X 43" Red Infectious Bags 3 Mil 50/case IW3848RLR 30 Gallon 38" X 48" Red Infectious Bags 1.3 Mil 100/case 4 rolls of 25

IL3339YRL 33 Gallon 33"X39" YELLOW Infectious Linen Bags 1.3 mil 200/case 8 rolls of 25

IL4047YRL 40 Gallon 40"X47" YELLOW Infectious Linen Bags 1.3 mil 150/case 6 rolls of 25

SL3043BLRL 36 Gallon 30" X 43" Blue 1.3 Mil Soiled Linen Bags 150/case 6 rolls of 25

SL3750BLRL 44 Gallon 37" X 50" Blue 1.3 Mil Soiled Linen Bags 150/case 6 rolls of

Lyn Distributing Phone 1-801-295-5022

81

81

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD NORTH SALT LAKE, UTAH 84054 PHONE 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

Bags for Square Trash cans 50 gallon – 56 gallon LLD or Low Linear Density Bags

T44X47-H-5 1.0 MIL 100 / Case white, black or clear 44” X 47” T44X47-EX-H-6 1.3 MIL 100/Case, White, Black, Clear 44” X 47” T44X47-XXH-5 2. MIL 100/case White. Black, Clear 44” X 50” T50X4815BLK-5 1.5 MIL 100 PER CASE BLACK 50” X 48”

Bags for Round Trash cans 50 gallon – 60 gallon LLD or Low Linear Density Bags

T38X58-EX-H-5 1.3 MIL 100/ Case White, Black, Clear 38” X 58” T38X58-XX-H-5 2 MIL 100/Case White, Black, Clear 38” X 58” T38X58-XX-H-5 2 MIL 100/Case Orange 38” X 58” T38X65-RL-5 2.5 MIL 50 PER ROLL BLACK 38” X 65” T38X58-XXX-H-5 3 MIL 50/Case Orange 38” X 58”

Bags for Round/Square cans 33 gallon – 45 gallon LLD or Low Linear Density Bags

T40X46-H-5 1 MIL 100/ Case White, Black, Clear 40” X 46” T40X46-EX-H-5 1.3 MIL 100/ Case White, Black, Clear 40” X 46” T40X46-XX-H-5 2 MIL 100/ Case White, Black, Clear 40” X 46”

Bags for Round/Square cans 25 gallon – 33 gallon LLD or Low Linear Density Bags

T33X39-H-5 1. MIL 250/ Case White, Black, Clear 33” X 39” T33X39EX-H-5 1.3 MIL 250/ Case White, Black, Clear 33” X 39” T33X39XX-H-5 2 MIL 100/ Case White, Black, Clear, Orange 33” X 39” T33X39XXX-H-5 3 MIL 100/ Case Black, Orange 33” X 39”

Bags for Wall Hugger cans 20 gallon – 25 gallon LLD or Low Linear Density Bags

T30X36-EX-H-6 1. MIL 250/ Case White, Black, Clear 30” X 36”

Bags for Office Waste cans 28 Quart – 41 Quart LLD or Low Linear Density Bags

T24X24WH-5 .5 MIL 500 PER CASE WHITE 24” X 24” T24X24BLK-5 .5 MIL 500 PER CASE BLACK 24” X 24” T24X32-5 .5 MIL 500/ Case White, Black, 24” X 32” T23X33-EXH-5 1 MIL 500 PER CASE BLACK 24” X 33” 3-11-2012

82

82

Lyn Distributing 965 North Redwood Road North Salt Lake, Utah 84054 1-800-366-5022

Trash Bags Draw String Quick Draw 10 gallon to 15 gallon size,

Trash Bags Draw String Quick Draw 10 gallon to 15 gallon size. With Quick Draw Trash Bags there is no need to knot the bag or use clumsy twist ties with the easy open or close Quick Draw trash bags. Quick Draw trash bags feature a convenient drawstring closure and flat bottom construction which allows you to use the full capacity of the bag. The drawstring helps keep hands clean and creates a handy carry handle. These trash bags are designed to fit the container without waste, adding more capacity, and are constructed with no bottom seal to help prevent leakage. Uniquely packaged on an interleaved coreless roll for added convenience. Specifications Size 24 inches X 28 inches. Capacity 10 to 15 Gallon Trash Bags, Gauge .85 Mil, Color White, Quantity per case 250 10 rolls, 25 bags per roll. Item #: QDTB24X28WH White

Trash Bags Draw String Quick Draw, 20 gallon to 33 gallon size, 1 mil,

Trash Bags draw string Quick Draw, 20 gallon to 33 gallon size, 1 mil. With Quick Draw Trash Bags there is no need to knot the bag or use clumsy twist ties with the easy open or close Quick Draw trash bags. Quick Draw trash bags feature a convenient drawstring closure and flat bottom construction which allows you to use the full capacity of the bag. The drawstring helps keep hands clean and creates a handy carry handle. These trash bags are designed to fit the container without waste, adding more capacity, and are constructed with no bottom seal to help prevent leakage. Uniquely packaged on an interleaved coreless roll for added convenience. Specifications Size 33x39, Capacity 20 gallon to 33 Gallon Trash Bags, Gauge 1 Mil, Color Choose Black or White, Quantity per case 150, 6 rolls of 25 bags per roll. Item # QDTB33X39WH White #QDTB33X39BK Black

Trash Bags Draw String Quick Draw 40 gallon to 50 gallon size, 1.2 mil

Trash Bags draw string With Quick Draw Trash Bags there is no need to knot the bag or use clumsy twist ties with the easy open or close

Quick Draw trash bags. Quick Draw trash bags feature a convenient drawstring closure and flat bottom construction which allows you to

use the full capacity of the bag. The drawstring helps keep hands clean and creates a handy carry handle. These trash bags are designed to fit

the container without waste, adding more capacity, and are constructed with no bottom seal to help prevent leakage. Uniquely packaged on an interleaved coreless roll for added convenience. Specifications Size 41 inches X 46 inches, Capacity 40 50 Gallon Trash Bags, Gauge 1.2 Mil,

Color Black, Quantity per case 100 5 rolls of 20 bags per roll. Item # QDTB4146BK Black Bags

LYN DISTRIBUTING PRODUCTS LIST “BROOMS-SQUEEGEES”

PHONE IN SALT LAKE AREA-295-5022 -OUTSIDE SALT LAKE AREA – 1-800-366-5022 1

SECTION “B” BROOMS, BRUSHES, FLOOR SQUEEGEES, SCRAPERS, HANDLES, FEATHER DUSTERS BRACES.

B176-6 -#176-HAND & NAIL BRUSH-White tampico - Staple set in smooth sanded and waxed hardwood block.

B101-6 -.#228-WISK BROOM-Made of selected fine broom corn. No coarse corn. Sewed two times. This is the best quality whisk broom for home, office and automobiles.

B101A-6 #101-BUTCHER BLOCK BRUSH STEEL-Tempered flat steel wire. Staple set in smooth wax tumbled hardwood block.

B110-6 -#110-PALMYRA FIBER DECK BRUSH-Staple set in smooth sanded hardwood block with one tapered and one threaded handle hole.

B1118A-6 -18" 11A LINE FLOOR BRUSH-Dark red coarse gauge plastic in center rows. Outside of brush is filled with fine gauge black plastic. Staple set in dense hole pattern in clear lacquered flat top hardwood block. RECOMMENDED USE: For wet or dry sweeping. The coarse plastic bristles in the center sweep the heavy debris, while the finer plastic on the outside sweep the finer dirt. Good on rough or smooth concrete, asphalt, wood, etc. The 11A BRUSHES REQUIRE A BD-60 HANDLE AND MAYBE USED WITH A B99 BRACE.

#B99 BRACE

BD-60 HANDLE

STREET BROOM

FOUNTAIN BRUSH OR WASH BRUSH

FLOOR BROOM OR GARAGE BROOM

UPRIGHT BROOM OR PALLET BROOM

COUNTER BRUSH #B55-6

BOLE BRUSH

CURVED FLOOR SQUEEGEE

STACK BRUSH

POLY ANGLED UPRIGHT BROOM

83

83



B1124A-6 -24" 11A LINE FLOOR BRUSH-SAME AS A #B1118A EXCEPT 24" IN LENGTH.

B1130A-6 -30" 11A LINE FLOOR BRUSH -SAME AS A #B1118A EXCEPT 30" IN LENGTH.

B1136A-6 - 36" 11A LINE FLOOR BRUSH-SAME AS A #B1118A EXCEPT 36" IN LENGTH.

B799-6 -.HEAVY ICE & UTILITY SCRAPER 6" WIDE-A heavy duty steel floor scraper with a steel handle. Use for scraping debris off concrete floor or scraping ice off concrete. Has 6" or 8" steel replacement blades.

#B1316-6 - 16" WHITE PLASTIC STREET BROOM-Heavy gauge white plastic. Staple set in smooth sanded hardwood block. Durable long-lasting plastic will far outlast natural fiber. Will not absorb odors, mildew, rot or discolor. Will not absorb water. Rinses clean. Wide flare on ends allows close sweeping to curbs. RECOMMENDED USE: For wet or dry sweeping where a rugged broom is required on rough surfaces such as concrete or asphalt street gutters, dairy barns, highway construction, etc. REQUIRES A #BC-60 HANDLE.

#B1424A-6 - 24" 14A LINE GARAGE BRUSH-Brown palmyra fiber. Staple set in clear lacquered flat top hardwood block. RECOMMENDED USE: Palmyra fiber has been used for many years in driveway and floor sweeping brushes, Its tough, long-wearing qualities make it a favorite for wet or dry sweeping rough or smooth concrete or asphalt driveways and floors. REQUIRES A BD-60 HANDLE AND #B99 BRACE IS OPTIONAL.

#B1516-6 - 16"AFRICAN BASS FIBER STREET PUSH BROOM-Specially treated African Bass fiber. Staple set in smooth sanded hardwood block. Wide flare on ends allows close sweeping to curbs. RECOMMENDED USE: For wet or dry sweeping in dairy barns, street sweeping, highway work, etc. REQUIRES A # BC-60 HANDLE.

#B152P-6 - PLASTIC BOWL BRUSH--Plastic fill material is twisted in wire. Set in plastic handle. Brush head size: 4" X 5" Handle length 11 3/4".

84

84



#B160-6 - PLASTIC HAND SCRUB BRUSH--Crimped plastic fill material is staple set in smooth wax tumbled hardwood block. Block size: 10" long X 2 1/4" wide. Length of trim: 1".

#B1724A-6 - 24"LONG #17A LINE FLOOR BRUSH--Steel wire and black tampico mixed in center rows. Border of black horsehair and plastic mixture. Staple set in clear lacquered flat top hardwood block. RECOMMENDED USE: For dry sweeping rough concrete and asphalt floors such as in machine shops, indoor parking lots, etc. REQUIRES A #BD-60 HANDLE. RECOMMEND A #B99 BRACE

#B2224A-6 - 24"LONG #22A LINE FLOOR BRUSH--Coarse brown plastic. Staple set in clear lacquered flat top hardwood block. RECOMMENDED USE: For wet or dry sweeping rough concrete and asphalt driveways. Also wet floors such as in breweries, bottling plants and creameries. REQUIRES A #BD-60 HANDLE. RECOMMEND A #B99-6 BRACE.

#B2230A-6 -30" LONG #22A LINE FLOOR BRUSH--Same as broom #B2224A except 30" long. REQUIRES A #BD-60 HANDLE. RECOMMEND A #B99 BRACE.

#B233-6 - LOW COST PAINT BRUSH 2" WIDE--Chinese bristles vulcanized in rubber. Single thickness. Smooth sanded handle with tin ferrule. Trim 1.5"

#B235-6 - LOW COST PAINT BRUSH 3" WIDE--Same as above except 3" wide.

#B236-6 - LOW COST PAINT BRUSH 4" WIDE--Same as #B233 except 4" wide.

#B2624-6 - 24" #26 LINE FLOOR BRUSH--Best quality black horsehair and plastic blend border, inside black SR grade plastic. Staple set in clear lacquered half-round hardwood block. RECOMMENDED USE: For wet or dry sweeping. This brush will sweep fine or coarse debris on all types of surfaces. This broom comes complete with a #BM-60 HANDLE.

#B2710-6 - 10" WIDE BUS FLOOR SWEEPING BRUSH--Filling material is staple set in clear lacquered hardwood block. Outside rows are filled with red plastic. Inside rows are filled with cream color plastic. This brush is designed to sweep under the seats and the aisles of buses. This brush come complete with a #BA-48" HANDLE.

#B3010-6 - FEATHER TIP UPRIGHT BROOM--9 1/8" long X 1 5/8" wide, with 4"trim. Light green feather tip plastic. Staple set in clear lacquered hardwood block. RECOMMENDED USE: For indoor sweeping fine dust on polished or rough floors in home, office or warehouse. This brush comes complete with a #BA-48" HANDLE, or may be used with a #BA-60, #BB-60, or #BM-60 handle.

85

85



#B3028-6.FOUNTAIN TRUCK & FREIGHT VAN WASHING BRUSH--10" long X 2.5" wide with 3" tampico tip trim. Filling material is staple set in cream color foam plastic block. Use as either a fountain brush with a #BF-60-6 handle or as a bucket-type brush with a #BFG-60-6 (60" FIBERGLASS handle) or a #BFG-72-6 (72" fiberglass handle).The 10" block have one threaded and one tapered handle hole. Protective bumper around block.

#B3029-6 - FOUNTAIN TRUCK & FREIGHT VAN WASHING BRUSH--10" long X 2.5" wide with 3" white plastic flag tip trim. Filling material is staple set in cream color foam plastic block. Use as either a fountain brush with a #BF-60-6 handle or as a bucket-type brush with a #BFG-60-6 (60" FIBERGLASS handle) or a #BFG-72-6 (72" fiberglass handle).The 10" block have one threaded and one tapered handle hole. Protective bumper around block. #B3032B-6 -.FOUNTAIN TRUCK & FREIGHT VAN WASHING BRUSH--10" long X 2.5" wide with 3" silver plastic flag tip trim. Filling material is staple set in cream color foam plastic block. Use as either a fountain brush with a # BF-60 handle or as a bucket-type brush with a #BFG-60-6 (60" FIBERGLASS handle) or a #BFG-72-6 (72" fiberglass handle).The 10" block have one threaded and one tapered handle hole. Protective bumper around block.

#B3033-6 - FOUNTAIN TRUCK & FREIGHT VAN WASHING BRUSH--Same brush as above except this brush is filled with GREEN NYLON TRIM.

#B3034-6 -FOUNTAIN TRUCK & FREIGHT VAN WASHING BRUSH--Same brush as #B3033 except this brush has a smaller block that is 8" long instead of 10" long.

#B3036-6 - 8"FOUNTAIN TRUCK & FREIGHT VAN WASHING BRUSH--Same as #B3032B except that this brush is 8" wide.

#B3037-6 - CONCRETE MIXER & MOBILE HOME WASHING BRUSH--10" wide cream colored foam plastic block. Use as either a fountain brush with No.BF-60 handle or as a bucket-type brush with #BB-60 handle. These brushes are acid resistant. Fill material is tampafil plastic.

#B3318-6 -FOUNTAIN TRUCK & FREIGHT VAN WASHING BRUSH--18" wide with silver flagged plastic trim set in foam plastic block with tw o threaded handle holes. This brush may be used with #BB-120 handle for tall van trailer washing or with #BFG-72 handle for low height van washing.

#B3324-6 - FOUNTAIN TRUCK & FREIGHT VAN WASHING BRUSH--24" wide brush that is the same as above except this brush is 24" wide. This brush may be used with the same handles as brush #B3318.

86

86



#B3916-6 - CARBON STEEL WIRE STREET BROOM--Round carbon steel wire. Staple set in smooth sanded hardwood block with two tapered handle holes. Wide flare on ends allows close sweeping next to curbs. RECOMMENDED USE: For thorough sweeping of asphalt and concrete before applying black-top sealant and for sweeping loose pea gravel and dirt from roofs before retaring. REQUIRES #BC-60 handle.

#B4118-6 - 18" STRAIGHT FLOOR SQUEEGEE W/HANDLE--Made of 1" angle aluminum to which a strip of high-grade, flexible rubber is attached with screws. Rubber is 2" wide X 1/4" thick. Use #B4218 refill to replace blade.

#B4124-6 - 24" STRAIGHT FLOOR SQUEEGEE W/HANDLE--Same as above except this floor squeegee is 24" wide. Use #B4224 refill to replace blade.

#B4136-6 -36" STRAIGHT FLOOR SQUEEGEE W/HANDLE--Same as #B4118 except this squeegee is 36" wide. Use #B4236 refill to replace blade.

#B4218-6 -18"REPLACEMENT BLADE FOR SQUEEGEE #B4118..



#B4408-6 -WINDOW SQUEEGEE 8"--Window squeegee for store, office and factory windows. Blade is made of heavy gauge aluminum. Handle socket is cadmium-plated steel. Double squeegee rubbers. Squeegee rubber is red. Back-up rubber is black. Use #B4408R refill to replace blade. May be used with #BC-60 handle to reach high windows.

#B4408R-6..REFILL BLADE FOR ABOVE SQUEEGEE..

#B4412-6 -WINDOW SQUEEGEE 12"--Same as #B4408 except 12" wide blade. This squeegee uses #B4412R refill to replace blade. #B4412R-6 -REFILL BLADE FOR ABOVE SQUEEGEE..

#B4418-6 -WINDOW SQUEEGEE 18"--Same as #B4408 except 18" wide blade. This squeegee uses #B4418R refill to replace blade.

#B4418R-6- REFILL BLADE FOR ABOVE SQUEEGEE..

87

87



#B4618-6 - 18"CURVED FLOOR SQUEEGEE W/HANDLE.. Made of 1" angle aluminum to which a strip of high-grade rubber is attached with plated screws. Rubber is 2" wide X 1/4" thick. This squeegee comes complete with handle. Use #B4218 refill to replace blade.

#B4624-6 - 24"CURVED FLOOR SQUEEGEE W/HANDLE.. Same as squeegee above except this squeegee is 24" wide. Use #B4224 refill to replace blade.

#B4636-6 - 36"CURVED FLOOR SQUEEGEE W/HANDLE.. Same as squeegee above except this squeegee is 36" wide. Use #B4236 refill to replace blade. #B5-SC-7-6 - PAINTERS SCRATCH/ SCRAPER BRUSH.. Round carbon steel wire. Staple set in wax tumbled hardwood block with scraper and handle bracket attached. For scaling and scraping old paint. This brush comes with a 4' long handle.

#B53-6 - HORSE HAIR COUNTER BRUSH--Horsehair and black tampico mixture. Staple set in clear lacquered hardwood block. Hang up hole in handle. Brush face length: 9" Overall length 13 1/2"

#B55-6 - SILVER FLAGGED-TIP PLASTIC COUNTER BRUSH.. Silver flagged-tip plastic. Staple set in clear lacquered hardwood block. Hang up hole in handle. This is a very popular brush. Sweeps finest dust. Brush face length: 9". Overall length 13 1/2".

#B6-BP-6 - FOAM PLASTIC BLOCK WHITE WALL BRUSH BRASS WIRE FILL.. Brass wire fill material set in plastic block that will not rot or crack when left setting in tire cleaning solution like wood block brushes.

#B6-NP-6 - FOAM PLASTIC BLOCK WHITE WALL BRUSH WITH BLACK NYLON FILL.. Black nylon fill material set in plastic block that will not rot or crack when left in tire cleaning solution like wood block brushes will.

#B68-6 - HARDWOOD BLOCK HAND SCRUB BRUSH WITH BROWN PLASTIC FILL-STIFF.. A wood block utility scrub brush with a stiff brown plastic bristle that shows little dirt.

#B680-6 - WHITE ACRYLIC BOWL MOP.. This bowl mop is acid resistant and holds liquid bowl cleaner in its soft acrylic material to be applied to bowls and urinals.

#B681-6 - WHITE ACRYLIC BOWL MOP WITH A SQUEEZE WRINGER.. This mop is same as above but has a white squeeze wringer to help release water after use.

#B68CP-6 - SHORT HANDLE UTILITY BRUSH WITH A POLYPROPYLENE BLOCK & CREAM PLASTIC FILL.. This brush will not break or crack. Will not absorb water. It's handle is set at a angle to prevent scraped knuckles. This brush is white in color and is recommended for use in the food industry.

88

88



#B70CP-6 - LONG PLASTIC HANDLE UTILITY BRUSH WITH CREAM PLASTIC FILL.. Same description as above except the handle is 20" long instead of 9"long.

#B718-6 - 18" LONG BLACK HORSEHAIR BROOM.. Stiff black horsehair, staple set in half round clear lacquered hardwood block. Use for sweeping smooth, dry floors, such as tile, linoleum, terrazzo, waxed and polished wood floors, etc. This broom comes with a BM-60 handle.

#B71N-6 - SHORT HANDLE WHITE NYLON UTILITY SCRUB BRUSH WITH WHITE POLYPROPYLENE BLOCK.. This brush will not crack or rot while setting in solutions of cleaning material. This brush is a little more aggressive than the B68CP. Use this brush around food areas and in all areas.

#B724-6 - 24" LONG BLACK HORSEHAIR BROOM.. Same as #B718 except this broom is 24" wide.

#B73N-6 - 20"LONG HANDLE WHITE NYLON UTILITY SCRUB BRUSH WITH WHITE POLYPROPYLENE BLOCK.. Same as #B71N except has a 20" handle instead of 9" handle.

#B751-6 - IRON HANDLE SCRUB BRUSH...Plastic scrub brush with a handle shaped like a iron. This brush can be used on many different surfaces.

#B155-6 - EUROPEAN STYLE BOWL BRUSH .. Polypropylene fiber brush set in a polypropylene handle. New angle design reaches every section of bowl. Brush is not affected by bowl cleaners. Rinses clean. Will not mar or scratch any surfaces. This brush has rounded head.

#B7539-6 - 8"BUG SPONGE WITH WINDOW SQUEEGEE & 1-1/2 FT. HANDLE.. This product is used mainly by the automotive industry to clean windshield. This product has a metal head holding the scrubber-sponge.

#B7539P-6 – 8” BUG SPONGE WITH WINDOW SQUEEGEE WITH HANDLE – PLASTIC HEAD- This product is like windshield cleaning tool above except it has a plastic head and handle.

#B8200-6 - FEATHER DUSTER WITH OSTRICH FEATHER 20” -This feather duster will attract dust and collect it to be shook loose somewhere else. Regular feathers will not attract dust, they just spread it.

#B8201-6 - FEATHER DUSTER WITH OSTRICH FEATHER 12” -This feather duster will attract dust and collect it to be shook loose somewhere else. Regular feathers will not attract dust, they just spread it.

89

89



#B8730-6…MOSS / FOAM RUBBER FLOOR SQUEEGEE… This double bladed floor squeegee will squeegee water and liquids from floors exceptionally well and will give over small bumps and not loose liquid that you are moving. Soft foam rubber is the secret. REQUIRES #BA-60-6 OR BB-60-6 HANDLE. 30” WIDE FLOOR SQUEEGEE. BB8730-T-6

#B8830-6..MOSS / FOAM NEOPRENE FLOOR SQUEEGEE… This double bladed floor squeegee is like the one above except that it is made of RED neoprene foam that is oil and solvent resistant for long life. 30” wide. REQUIRES #BA-60-6 OR #BB-60-6 HANDLE.

#B9500-6 - METAL HANDLE COUPLER...This handle coupler is used to connect two handles together. Diameter of handles should not to exceed 1-1/8".

#B976-YL-6 - POLY BROOM UPRIGHT...This broom is like a corn broom except it will not break apart like a corn broom, because of the poly fill material. The fill material is fairly stiff. This broom is yellow in color.

#B976-RD-6 - POLY BROOM UPRIGHT...This broom is like a corn broom except it will not break apart like a corn broom, because of the poly fill material. The fill material is fairly fine for light sweeping. This broom is red in color. 10”-12” head size.

#B464-6 - POLY BROOM UPRIGHT...This broom is like a corn broom except it will not break apart like a corn broom, because of the poly fill material. The fill material is fairly fine for light sweeping. This broom has a small head for hard to reach places. 8” head size.

#BFG60-6- FIBERGLASS HANDLE 60" LONG...This handle works on brooms , wash brushes and paint rollers. When left in water or cleaning solutions it will not rot away like wood. These handle are extremely strong.

#BFG72-6- FIBERGLASS HANDLE 72" LONG...This handle works on brooms, wash brushes and paint rollers. When left in water or cleaning solutions it will not rot away like wood. These handle are extremely strong.

#B98-6 - STEEL SCRAPER FOR BROOMS...Steel scraper that attaches to the back of a broom.

#B99-6 - BROOM BRACE.. Brace used for brooms 18" to 36" to help strengthen the handle so that you don't break handles and will provide for a better job of sweeping surface.

#BA-48-6 -WOOD HANDLE 48" LONG - THREADED.. Wood threaded handle 7/8" thick 48" long.

90

90



#BA-60-6 - WOOD HANDLE 60" LONG W/ WOOD THREADS. Same handle as above except is 60" long.

#BA-72-6…WOOD HANDLE 72” LONG WITH WOOD THREADS…Wood handle with wood threads 15/16” thick 72” long. Hard wood handle with finish coating.

#BB-60-6 - METAL THREADED WOOD HANDLE HEAVY DUTY 1 1/8" DIAMETER...Hard wood handle with clear lacquered finish. One end rounded and the other end is equipped with heavy-duty metal thread. Handle length is 60".

#BB-72-6 - METAL THREADED WOOD HANDLE HEAVY DUTY 1 1/8" DIAMETER...Hard wood handle with clear lacquered finish. One end rounded and the other end is equipped with heavy-duty metal thread. Handle length is 72".

#BB120-6 - METAL THREADED HARDWOOD HANDLE HEAVY DUTY 1 1/8" DIAMETER...Same handle as above except this handle is 10'long.

#BC-144-6 - WOOD HANDLE HEAVY DUTY 1 1/8" DIAMETER WITH TAPERED END...This handle is made of N0.1 straight hardwood smoothly sanded with one end rounded and the other end tapered. Handle length is 12' long.

#BC-60-6 - WOOD HANDLE HEAVY DUTY 1 1/8" DIAMETER WITH TAPERED END...Same handle as above except this handle is 60" long.

#BD-60-6 -MALLEABLE METAL CONNECTOR ON HEAVY DUTY LACQUERED HANDLE...This handle is made of best grade lacquered hardwood with metal red heavy duty brace connector. Handle is 60" long.

#BF-60-6 -TUBULAR STEEL FOUNTAIN BRUSH HANDLE...Tubular steel with baked enamel finish. Handle is designed for heavy-duty use. Standard thread on one end and other end equipped with water hose coupling. Handle length is 60".

#BF-93-6 -REPLACEMENT THREADS / FIBERGLASS.. Replacement threads made of heavy-duty fiberglass for extra strength. Easy to install on any 15/16 inch diameter handle. Simply cut off damaged thread and slip on fiberglass thread.

#BS-94-6 -REPLACEMENT THREADS / STEEL - Replacement threads made of steel for extra strength. Easy to install on any 1-1/8 inch diameter handle. Simply cut off damaged thread and slip on steel thread.

#BU-90-6 -REPLACEMENT THREADS / NYLON -Replacement threads made of heavy-duty nylon for extra strength. Easy to install on any 1-1/8 inch diameter handle. Simply cut off damaged thread and slip on nylon thread.

#BR-90-6 -REPLACEMENT THREADS / POLY -Replacement threads made of heavy-duty poly for extra strength. Easy to install on any 1-1/8 inch diameter handle. Simply cut off damaged thread and slip on poly thread.

91

91



#BBR-60-6 -" WOOD HANDLE WITH NYLON THREADS.- One end is equipped with acid-resistant thread. 1-1/8 diameter handle. Special lacquered surface for long handle life.

#BH100-6 - SQUEEGEE HANDLE WITH METAL BRACE END...This hardwood handle has a metal V brace to fit the B41__ & B46__ line of floor squeegees, these squeegees come complete with handle, but if one breaks during use, these are the replacement handle.

#BM-48-6 - METAL THREADED HARDWOOD HANDLE 48" LONG...Selected hardwood with clear lacquered finish. One end rounded and other end equipped with metal thread to fit standard floor broom or paint roller.

#BM-60-6 - METAL THREADED HARDWOOD HANDLE 60" LONG...Same as above handle except this handle is 60" long.

#BW-54-6 - SHORT THREADED HARDWOOD HANDLE 54" LONG...This handle is made to be used on wax applicators. Handle is clear lacquered and has short wood threads that will not go beyond flat applicator base to interfere with pad holder tightening.

#BZ8200-6 - DAIRY SCRUB BRUSH...Rounded head scrub brush to use in dairy areas and other food plants. Made from white nylon to meet all sanitary codes.

#B180-HH-6 – Horse hair brush for cleaning upholstery. Soft bristle brush won’t harm fabric. This brush has a poly block and will not rot with water.

#B65-HH-6 – Horse hair brush for cleaning upholstery. Soft bristle brush won’t harm fabric. This brush has a poly block and will not rot with water.

BWPTADAPT-6 – Wood cone thread adapter. Changes threaded handles into a taper handle end.

E1800-172-6 – 18” paint roller frame, that requires a thread handle to use. This heavy duty frame is use for applying floor coatings.

E18SCO38-6 – Paint roller cover 3/8” nap, used for applying floor coatings. 18” wide for heavy duty frames. CALL US AT LYN DISTRIBUTING FOR YOUR SPECIAL BROOM NEEDS

B155-6 BOLE BRUSH

B8200-6 FEATHER DUSTER

E1800-172-6 ROLLER FRAME 18”

B65-HH-6 UPHOLSTERY BRUSH WITH HANDLE

B180-HH-6 UPHOLSTERY BRUSH

E18SC038-6 - 18” ROLLER COVER FOR FLOOR COATINGS

92

92


Duo-Sweep® Angle Brooms are designed to provide general purpose sweeping, reaching into corners, along walls, or into hard to reach areas for fast, efficient cleaning. From lobby and light industrial, to heavy duty, this angle broom is well suited for theater lobbies, restaurants, convention centers, malls, and theme parks. 56" Long x 12” wide with 48" color-coded Self-Locking Flex-Tip® Fiberglass handle for more hygenic use and HACCP complicance. two handle holes; one angled, one upright #41083

01 Brown, 02 White, 03 Black, 04 Yellow, 24 Orange

05 Red, 09 Green, 14 Blue, 25 Tan, 68 Purple

Sanitary, solid one-piece construction minimizes possible contamination areas; reduces possibility for dirt to collect in squeegee. Economical squeegees are available in 6 Spectrum® colors to help prevent cross contamination. Integral blade eliminates seams, and crevices inherent in conventional double foam blade; eliminates places for bacteria to grow. Colors: Blue(14), Green(09), Red(05), White(02), Yellow(04), Black(03), 68 Purple, 24 Orange #36567 = 20" Squeegees #36568 = 24" Squeegees

#40480 - 8" Plastic Handle w/White Polyester Bristle 8" POLYESTER BENCH BRUSH

4048001 Brown, 4048002 White

4048004 Yellow, 4048005 Red

4048009 Green, 4048014 Blue

4048025 Tan

93

93


8" Utility Scrub Brush

4054101 Brown, 4054102 White

4054103 Black, 4054104 Yellow

4054105 Red, 4054109 Green

4054114 Blue, 4054125 Tan

Tank & Kettle Brushes 5-1/2" x 9" Flare Head Brush w/Polyester Bristles #40043 Use these brushes for your HACCP program.

01 Brown, 02 White 03 Black, 04 Yellow

05 Red, 09 Green 14 Blue, 25 Tan Flare head design assures all-around thorough cleaning and can be used with different length threaded handles to reach bottom of kettles and tanks. Crimped bristles are staple set into solid plastic head with polyester bristles that provide excellent chemical resistance. Base resins used to produce bristles are made of FDA approved materials. Threaded handle hole; #40225 Sparta® Spectrum® Self-Locking Flex-Tip® Handle is recommended to complete HACCP compliant program

Seafood Blue Produce Green

Meat Red Bakery Yellow Deli White

60" Spectrum Fiberglass Handle

W/Self-Locking Flex-Tip 1" D

#40225

Use these handles for your HACCP program.

01 Brown, 02 White 03 Black, 04 Yellow

05 Red, 09 Green 14 Blue, 25 Tan

94

94


41890 - 18" Omni Sweep

Color-Coded Omni Sweeps

02 White, 04 Yellow, 24 Orange

05 Red, 09 Green, 14 Blue, 68 Purple

41891 - 24" Omni Sweep

Color-Coded Omni Sweeps



Seafood Blue Produce Green Meat Red Bakery Yellow Deli White

LONG HANDLE UTILITY BRUSH WITH A POLYPROPYLENE BLOCK & with Polyester Bristles.

This long handle utility scrub brush will not break or crack. Will not absorb water. Choose brush color.

This utility scrub brush is recommended for use in the food industry. 20" long. These color coded brushes are to help with HACCP.

4050101 Brown 4050102 White 4050103 Black

4050104 Yellow 4050105 Red 4050109 Green

4050114 Blue 4050125 Tan

95

95


6" POLYESTER HAND SCRUB BRUSH or CUTTING BOARD BRUSHES

HAND SCRUB BRUSHES WITH A POLYPROPYLENE BLOCK & with Polyester Bristles. This brush will not break or crack. Will not absorb water. Choose brush color. This utility scrub brush is recommended for use in the food industry. 6"long. These color coded brushes are to help with HACCP. Hand Scrub brush has medium stiff bristles for heavy cleaning. #40521. brown = 4052101 white =4052102 etc. Bristle Trim: 1.38" Length: 6" Width: 2.50"

01 Brown 02 White 04 Yellow 05 Red

09 Green 14 Blue 25 Tan

40000 - 12" Total Length Utility Brush with a Carafe Handle and Soft Polyester Bristles

Staple set round or oval head brushes are versatile for cleaning a variety of commercial kitchen equipment with rounded surfaces such as steam kettles, vats, Cateraide™ Beverage Servers, Trim Line™ Beverage Dispensers, pots, pans, crocks, and tanks. Rounded heads and ends protect against scratching and clean in all directions. This Round Head Scrub brush has softer bristles for more delicate cleaning.

01 Brown 02 White 04 Yellow 05 Red 09 Green

14 Blue 25 Tan

Bristle Diameter: 2.75 inches. Brush Length: 4.00 inches Overall Length: 12.00 inches. Weight:1-lb.

40001 - 16" Total Length Utility Brush with a Carafe Handle and Soft Polyester Bristles

Staple set round or oval head brushes are versatile for cleaning a variety of commercial kitchen equipment with rounded surfaces such as steam kettles, vats, Cateraide™ Beverage Servers, Trim Line™ Beverage Dispensers, pots, pans, crocks, and tanks. Rounded heads and ends protect against scratching and clean in all directions. This Round Head Scrub brush has softer bristles for more delicate cleaning.

01 Brown 02 White 03 Black 04 Yellow 05 Red

09 Green 14 Blue 25 Tan

Bristle Diameter: 3.25 inches Brush Length: 6.50 inches Overall Length: 16"

96

96

3" Round Bristle Brushes


40003 - 30" Total Length Oval Head Utility Brush with a Carafe Handle and Medium Stiff Polyester Bristles

Staple set oval head brushes are versatile for cleaning a variety of commercial kitchen equipment with rounded surfaces such as steam kettles, vats, Cateraide™ Beverage Servers, Trim Line™ Beverage Dispensers, pots, pans, crocks, and tanks. Rounded heads and ends protect against scratching and clean in all directions. This Oval Head Scrub brush has medium stiff bristles for heavy cleaning.

02 White 04 Yellow 05 Red 09 Green 14 Blue

Brush Length: 6" Overall Length: 30"

40005 - 16" Total Length Round Head Utility Brush with a Carafe Handle and has Medium Stiff 4"Diameter Round Polyester Bristles

Staple set round head brushes are versatile for cleaning a variety of commercial kitchen equipment with rounded surfaces such as steam kettles, vats, Cateraide™ Beverage Servers, Trim Line™ Beverage Dispensers, pots, pans, crocks, and tanks. Rounded heads and ends protect against scratching and clean in all directions. This Round Head Scrub brush has medium stiff bristles for heavy cleaning.

Bristle Diameter: 4" Brush Length: 6" Overall Length: 16"


40006 has 30" Total Length Round Head Utility Brush with a Carafe Handle and has Medium Stiff 3" Diameter Round Polyester Bristles




97

97

5" Round Bristle Brushes

Scrub Brushes

41395 - 7.25" Multi Purpose Hand Scrub w/Polyester Bristles


40008 has 30" Total Length Round Head Utility Brush with a Carafe Handle and has Medium Stiff 5" Diameter Round Polyester Bristles




40423 - 10" Hi-Lo™ Floor Scrub Brush

The split-shape is efficient for cleaning flat surfaces, under counters, around equipment, and along baseboards. Non-absorbent plastic blocks and synthetic bristles wash easily and prevent gathering of mold and mildew.

01 Brown 02 White 03 Black 04 Yellow

05 Red 09 Green 14 Blue 25 Tan

#41395 – 7.25” Multi Purpose Hand Scrub Brush.

Stiff Polyester bristles staple set into comfortable, easy grip handle styles. This hand scrub brush reaches into tight crevices and corners. This multi purpose hand scrub brush has a plastic block that won't crack or splinter. All base resins used to produce blocks and bristles are made of FDA approved materials. 7.25" long brush

02 White 04 Yellow 05 Red

09 Green 14 Blue

98

98

41396 - 8-1/2" Multi Purpose Hand Scrub w/Polyester Bristles

40024 - 6" Iron Handle Hand Scrub or 6" Polyester Bake Pan Lip Brush


5-1/4"x7-1/2" KETTLE BRUSH or TANK BRUSH Flare head design assures all-around thorough cleaning and can be used with different length threaded handles to reach bottom of kettles and tanks. Crimped bristles are staple set into solid plastic head with polyester bristles that provide excellent chemical resistance. Base resins used to produce bristles are made of FDA approved materials. Threaded handle hole; #40225 Sparta® Spectrum® Self-Locking Flex-Tip® Handle is recommended to complete HACCP compliant program

4004101 Brown 4004102 White 4004103 Black 4004104 Yellow

4004105 Red 4004109 Green 4004114 Blue 4004125 Tan

Stiff Polyester bristles staple set into comfortable, easy grip handle styles. This hand scrub brush reaches into tight crevices and corners. This multi purpose hand scrub brush has a plastic block that won't crack or splinter. All base resins used to produce blocks and bristles are made of FDA approved materials. 8.5" long brush


09 Green 14 Blue

Stiff Polyester bristles staple set into comfortable iron handle grip brush. This hand scrubbrush reaches into tight crevices and corners. This iron handle scrub brush has a plastic block that won't crack or splinter. All base resins used to produce blocks and bristles are made of FDA approved materials. 6" long brush, 2.5" wide, trim length is 1".


09 Green 14 Blue

99

99


Poly Scoop Shovel Item No: 79722 For scooping grain, snow, mulch or general purpose clean-up #12 Size equivalent, 14-3/4" x 18-3/4" poly blade 27" Ash wood handle with poly D-grip on this Poly Scoop Shovel

5" Handle Hand and Nail Brush with Polyester Bristles And Wall Sign with hang up hook.

Hand and Nail Brush kit. New improved stiffer center bristles offer a more thorough cleaning. Works better than soap and water alone for cleaning under fingernails where bacteria, dirt, and other contaminants can become trapped. 40021 kit includes a 5" x 2" brush, cord to secure the brush in place, hanging hook, and an adhesive backed hand washing instruction decal in English and Spanish Length: 2" Width: 5"

Color Coded Floor Squeegee, Sparta Spectrum 2 Blade 24 inch #41568 Color Coded Floor Squeegees Sparta Spectrum Hygienic All Plastic 2 Blade Foam floor squeegees, Color Coded Floor Squeegees are easy to sanitize, will not rust, and are extremely durable; frame for handle is threaded for secure use. Hygienic Color Coded floor squeegees available in SEVEN colors for use with HACCP compliance programs. No. FSB40225 Sparta Spectrum Self-Locking Flex-Tip color coded 60 inch handle is recommended to complete HACCP compliant program. 18” available # 41567



100

100

This advanced formula degreaser/deodorizer cleaner utilizes the best available natural materials to keep pace with today’s environmental regulations. Powerful all organic, biodegradable, solvents are specially blended to outperform most conventional petroleum based solvents plus have the added advantage of being water dilutable. The multipurpose concentrate instantly emulsifies grease, oils and fats without the use of harsh acids, caustics/alkalines, petroleum distillates, butyl solvents, chlorinated solvents, or ozone depleters. This organic extract based product has an extremely powerful and pleasant natural citrus fragrance to deodorize effectively even under the most extreme conditions. The vapors from this product leave the area smelling clean and fresh with a natural orange fragrance. Ideal uses for this product include degreasing concrete floors, equipment, trucks, motors, and metal surfaces. It is safe for use on many plastics, glass, and a variety of painted surfaces. This product will remove most resins, adhesives, printing inks, decals, dirt and soil, and most petroleum based substances such as tar, asphalt, grease, oil, and even rubber tire marks. The combined degreasing/deodorizing ability makes it an excellent choice for maintaining drains, grease traps, and other sewer/septic applications as well as for treating dumpsters, trash receptacles, sewer plants, garbage trucks, and more. B.O.D. concentrate is an excellent general purpose, heavy duty industrial degreaser cleaner, tar and asphalt remover for shops, maintenance, and plant applications. Use to clean walls, floors, autos, trucks, counter tops, vinyl dashes in autos, rubber mats, vinyl mats, restroom areas and other places that need to be cleaned and deodorized. When mixing with water, product should stay clear and mix easily. Surface Degreasing: Dilute with water 2-4 ounces per gallon and apply by brushing, spraying or mopping. Allow solution to stand for 5 minutes. Rinse thoroughly. For removal of stubborn spots, apply undiluted and rinse off with water. Odor Control: Dilute with water 2 ounces per gallon and apply by brushing, spraying or mopping. Drain Cleaning: Apply product undiluted 6-8 ounces directly into the drain. Let stand for 1 to 2 hours. Flush drain with hot water. General Purpose Cleaning: Dilute 16 ounces (pint) of product per gallon of water and apply by brushing, spraying or mopping. Allow solution to stand for 2 minutes. Rinse thoroughly. Heavy Duty Cleaning: Spot Cleaning of Stubborn Soil/Tar and Asphalt Removal: Apply product undiluted by spraying or wiping onto surface. Brush or agitate if required and repeat as necessary. Wipe clean with shop cloth and/or rinse thoroughly with water. Do not use this product on waxed floors, the degreasing and cleaning quality of this product will dull or remove wax. This product contains no phosphates and has a controlled pH of less than 9.

For Industrial Use Only Keep Out Of Reach of Children.

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE,UTAH 84054 Phone 295-5022 Outside Salt Lake Area 1-800-366-5022

B.O.D. Concentrate Biodegradable Orange Degreaser

• Cleans • Degreases • Deodorizes • Contains 100% Natural Citrus Solvents • Nonchlorinated, Non-Butyl Formula • Contains No Petroleum Distillates or No Ozone Depleters • All Organic, 100% Biodegradable • Pleasant Orange Aroma

101

101

B.O.D. DOUBLE CONCENTRATE BIODEGRADABLE ORANGE DEGREASER CLEANER

DOUBLE CONCENTRATE

Freight Saver

PRODUCT DESCRIPTION This highly concentrated citrus cleaner degreaser is safe to use on a wide variety of surfaces. Simply dilute the concentrate to the proper dilution and spray the diluted product with a trigger sprayer on any surface and wipe it off. It quickly dissolves the toughest filth, grease, dirt, oil, wax, ink, resin, carbon, soot, and soap scum. Will not harm painted surfaces when diluted properly. This excellent penetrating formulation is aided by the advancement of a new organic solvent derived from orange oil, which is biodegradable, safe to use, non-toxic and produces no objectionable fumes when sprayed. B.O.D. is excellent for a laundry pre-spot! Does not contain Butoxyethanol (butyl). B.O.D. DOUBLE concentrate is a safe alternative to hazardous cleaners of the past. This cleaner gives you something that ordinary cleaners can't offer- "DEODORIZING ACTION". The citrus extracts in this cleaner leave a pleasant, fresh scent that your customers are sure to notice and appreciate. USES/BENEFITS *VINYL *TOOLS *TABLES *PLASTICS *SOAP SCUM *RESTROOMS *SINKS *ALL WALLS *ALL FLOORS *PORCELAIN *EVERY APPLIANCE *GREASE *LAUNDRY PRE-SPOT *SINKS, SHOWERS B.O.D. Has a pleasant orange scent, safe on all surfaces when used as directed, economical & convenient and won't leave a film when used as directed. DIRECTIONS FOR USE: Dilute B.O.D. with 10 –150 parts water, then simply spray it on and wipe it off. Leaves no streaks, films or smudges. The above directions are flexible rather than specific. In many cases a more diluted solution can be used, while for extreme conditions a less diluted solution may be used.


102

102

This advanced formula degreaser/deodorizer cleaner utilizes the best available natural materials to keep pace with today’s environmental regulations. Powerful all organic, biodegradable, solvents are specially blended to outperform most conventional petroleum based solvents plus have the added advantage of being water dilutable. The multipurpose concentrate instantly emulsifies grease, oils and fats without the use of harsh acids, caustics/alkalines, petroleum distillates, butyl solvents, chlorinated solvents, or ozone depleters. This organic extract based product has an extremely powerful and pleasant natural citrus fragrance to deodorize effectively even under the most extreme conditions. The vapors from this product leave the area smelling clean and fresh with a natural orange fragrance. Ideal uses for this product include degreasing concrete floors, equipment, trucks, motors, and metal surfaces. It is safe for use on many plastics, glass, and a variety of painted surfaces. This product will remove most resins, adhesives, printing inks, decals, dirt and soil, and most petroleum based substances such as tar, asphalt, grease, oil, and even rubber tire marks. The combined degreasing/deodorizing ability makes it an excellent choice for maintaining drains, grease traps, and other sewer/septic applications as well as for treating dumpsters, trash receptacles, sewer plants, garbage trucks, and more. B.O.D. Ready To Use is an excellent general purpose, heavy duty industrial degreaser cleaner, tar and asphalt remover for shops, maintenance, and plant applications. Use to clean walls, floors, autos, trucks, counter tops, vinyl dashes in autos, rubber mats, vinyl mats, restroom areas and other places that need to be cleaned and deodorized. Product is a ready to use formula, but may be mixed with water, product should stay clear and mix easily. Surface Degreasing: Dilute with water 32-64 ounces per gallon and apply by brushing, spraying or mopping. Allow solution to stand for 5 minutes. Rinse thoroughly. For removal of stubborn spots, apply undiluted and rinse off with water. Odor Control: Use as is and apply by brushing, spraying or mopping. General Purpose Cleaning: Use as is or dilute 16-64 ounces (1 pint -1/2 gallon) of product per gallon of water and apply by brushing, spraying or mopping. Allow solution to stand for 2 minutes. Rinse thoroughly. Heavy Duty Cleaning: Spot Cleaning of Stubborn Soil: Apply product undiluted by spraying or wiping onto surface. Brush or agitate if required and repeat as necessary. Wipe clean with shop cloth and/or rinse thoroughly with water. Do not use this product on waxed floors, the degreasing and cleaning quality of this product will dull or remove wax. This product contains no phosphates and has a controlled pH of less than 9.

For Industrial Use Only Keep Out Of Reach of Children.


B.O.D. READY TO USE Biodegradable Orange Degreaser

• Cleans • Degreases • Deodorizes • Contains 100% Natural Citrus Solvents • Nonchlorinated, Non-Butyl Formula • Contains No Petroleum Distillates or No Ozone Depleters • All Organic, 100% Biodegradable • Pleasant Orange Aroma

103

103

NEW CAR PROTECTIVENEW CAR PROTECTIVECOATING REMOVER AND DE-COATING REMOVER AND DE-

WAXERWAXERNEW FORMULA FOR VEHICLES WITHNEW FORMULA FOR VEHICLES WITH

SENSITIVE RUBBER MOLDINGSENSITIVE RUBBER MOLDING

C C R 92 WAS ESPECIALLY DEVELOPED TOREMOVE PROTECTIVE COATINGS AND WAX FROM

FOREIGN CARS AND EQUIPMENT THAT HAVE BEEN COATEDTO PROTECT THE SURFACE FROM THE ENVIRONMENT WHILE IN

TRANSPORTATION FROM FOREIGN COUNTRIES.

C C R 92 MAY BE DILUTED WITH MINERAL SPIRITS ORKEROSENE TO REDUCE COSTS.

DIRECTIONS FOR USE:MIX 1 PART C C R 92 WITH 1-4 PARTS SOLVENT. APPLY TO A NEW CAR WITH A MITT

OR A LOW PRESSURE SPRAYER (TANK TYPE SPRAYER). LET SET ON SURFACE FOR 1 TO5 MINUTES THEN AGITATE. RINSE WITH CLEAR WATER. C C R 92 IS SAFE ON METALSAND TENDS TO RETARD CORROSION ON SURFACES.

DANGER:KEEP OUT OF REACH OF CHILDREN. HARMFUL OR FATAL IF SWALLOWED.

CONTAINS PETROLEUM DISTILLATES, DO NOT TAKE INTERNALLY. IF INGESTED-DO NOTINDUCE VOMITING. COMBUSTIBLE LIQUID- KEEP AWAY FROM HIGH HEAT AND OPENFLAME

LYN DISTRIBUTING 965 North Redwood Road North Salt Lake, Utah 84054PHONE IN SALT LAKE AREA 295-5022 - OUTSIDE SALT LAKE AREA 800-366-5022

104

104

NEW CAR PROTECTIVENEW CAR PROTECTIVECOATING REMOVER ANDCOATING REMOVER AND

DE-WAXERDE-WAXER

C C R WAS ESPECIALLY DEVELOPED TOREMOVE PROTECTIVE COATINGS AND WAX FROM

FOREIGN CARS AND EQUIPMENT THAT HAVE BEEN COATEDTO PROTECT THE SURFACE FROM THE ENVIROMENT WHILE IN

TRANSPORTATION FROM FOREIGN COUNTRIES.

C C R MAY BE DILUTED WITH MINERAL SPIRITS ORKEROSENE TO REDUCE COSTS.

DIRECTIONS FOR USE:MIX 1 PART C C R WITH 1-4 PARTS SOLVENT. APPLY TO A NEW CAR WITH A MITT

OR A LOW PRESSURE SPRAYER (TANK TYPE SPRAYER). LET SET ON SURFACE FOR 1 TO5 MINUTES THEN AGITATE. RINSE WITH CLEAR WATER. C C R IS SAFE ON METALS ANDTENDS TO RETARD CORROSION ON SURFACES.

DANGER:KEEP OUT OF REACH OF CHILDREN. HARMFUL OR FATAL IF SWALLOWED.

CONTAINS PETROLEUM DISTILLATES, DO NOT TAKE INTERNALLY. IF INGESTED-DO NOTINDUCE VOMITING. COMBUSTIBLE LIQUID- KEEP AWAY FROM HIGH HEAT AND OPENFLAME

LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, Utah 84054PHONE IN SALT LAKE AREA 295-5022 - OUTSIDE SALT LAKE AREA 800-366-5022

105

105

393-090203

CD PLUS SOLVENT WATER RINSABLE Product #

Water-rinsable industrial degreaser

Developed to safely remove grease, oil, cosmoline and tar from motor, chassis, tools and parts. Use directly from the containeror diluted with water, it works quickly without causing corrosion under normal conditions. Made from a blend of natural andsynthetic compounds that combine to produce a remarkably effective product. Natural citrus extracts produce incrediblesolvency to cut through the most difficult oil, grease and tar deposits. Carefully selected, ozone-safe solvents allow the use ofthis product on plastics and painted surfaces. Biodegradable rinse additives suspend grease, grime and soils in water tocomplete the cleaning/degreasing process.

They are so quick and effective they are perfect to use on:l Metal parts l Parts washer l Painted surfaces l Most plasticl Truck parts l Motors l Chassis l Cement floors

Effective Againstl Grease and oil l Adhesivel Cosmoline l Undercoatingl Grime l Tar

Features and Benefitsl Removes grease, oil and tar from motors, chassis, tools and partsl Works quickly without causing corrosionl Water-rinsable

DirectionsFor cleaning motors, chassis, truck parts and cement floors: Useundiluted and rinse with water. For light cleaning, dilute with up to 5parts of water.Dip tank: Use undiluted and rinse with water.Cosmoline undercoating and adhesive removal: Spray, brush orsponge undiluted onto surfaces. Rinse with water.Test plastics and painted surfaces before using.

AuthorizationsUSDA authorization: C1: Cleaning compounds for all surfaces ininedible processing areas, non-processing areas and exterior areas.

SafetyCaution: Combustible. May be harmful if swallowed. Keep out of the reach of children.

Quantities55 gallon30 gallon5 gallon4 x 1 gallon/case6 x 1 gallon/case LYN DISTRIBUTING 965 NORTH REDWOOD ROAD, N.S.L., UTAH 84054 PHONE 1-800-366-5022

PropertiesAppearance......................... Colorless liquidFragrance .......................... SolventReady to use or Conc. ....... Use as bothSpecific gravity……........... 0.803Flash point ........................ 105 º FVOC content....................... >90 % by wt.Solubility............................ EmulsifiesBiodegradable..................... YesChlorinated solvents …...... Noned’Limonene content............ 21.5%

Active Ingredients CAS NumberMineral Spirits ......................................................................................................................... 8052-41-3d’Limonene .............................................................................................................................. 5989-27-5Nonionic Surfactant ................................................................................................................. 9036-19-5

DOT Shipping (ground transportation)Proper Shipping Name: NoneClass: NoneID Number: NonePackage Group: None

Milwaukee, WI 53224 • 1-800-743-6417 • Fax 414-354-9219 • www.athea.com

106

106

Citrus Drain Energizer

Contains No Petroleum based or Chlorinated Solvents

NON-ACID, NON-CAUSTIC, NON-CORROSIVE, BIODEGRADABLE

FRESH CITRUS AROMA

SPEEDS ACID DRAIN OPENER ACTION

KNOCKS DOWN FOUL ACID ODORS

DISSOLVES GREASE, BODY OILS, FATS

A 100% active, all natural, highly dilutable, citrus based cleaner in a pour top container.

Concentrated cleaner can be diluted to desired strength for many cleaning jobs. Excellent grease cutting and soil dissolving action. Works as a degreaser for engines, motors, grease traps, concrete and removes oil & grease

stains, bumper stickers & decals, adhesives, scuff marks, crayon marks, tar, asphalt and tire marks from any non-porous hard surfaces. Controls odors and leaves the area where used with a lingering fresh citrus fragrance.

Available in Quarts (12 quarts per case) or Pints (24 Pints per case) 55 gallon drums.

A DRAIN MAINTENANCE

Product Pour into Drains, let set for 5-15

minutes, then flush with water. Will Clean & Deodorize Drains.

Lyn Distributing Serving Industries Across North America Phone 1-800-366-5022

Web Site www.lyndist.com

107

107

379-090203

CITRUS DRAIN ENERGIZER & CLEANER Product #

Clean and deodorize drains & grease traps

A safe, all-natural product that allows you to remove clogs, as well as maintain and deodorize drains and greasetraps. Formulated with the all-natural orange peel extract d’Limonene, this product easily cuts through heavygrease and grime. It also deodorizes as it cleans, leaving behind the pleasant fragrance of fresh oranges. Non-corrosive, safe to use on most pipes and can also be safely used to deodorize septic tanks.

Use in:l Bathroom drains l Sinks l Floor drains l Slow drainsl Septic tanks l Wet wells l Drain fields l Grease traps

Eliminates:l Greasy build-up l Organic debrisl Fatty deposits l Annoying odors

Features and Benefitsl Formulated with a blend of 50% d’Limonene, grease-stripping solvents and emulsifying agentsl Excellent alternative to hazardous acid or caustic drain cleanersl Will not disrupt bacterial actionl Regular applications keep drains clog-free

DirectionsFor clogged or slow drains, add one pint directly to drain and allowto act for 30 minutes.Maintain and deodorize drains add 4 ounces to each drains weekly.To clean grease traps, add one gallon directly to trap or pour intonearest sink. Allow to act overnight and flush with hot waterTo deodorize septic systems and improve drainage, add 1/2 to 1gallon directly to tank and distribution box.AuthorizationsC1: Cleaning compounds for all surfaces in indelible processing

area, non-processing areas and exterior areas.

SafetyCaution: Combustible. May be harmful if swallowed. Use with adequate ventilation. Avoid contact with eyes and mucousmembranes or prolonged or reputed contact with skin. Keep out of the reach of children.

Quantities55 gallon30 gallon5 gallon4 X 1 gallon/case6 X 1 gallon/case12 pint/case North Salt Lake, UT 84054 * 1-800-366-5022 * Fax 801-292-6196 * www.LYNDIST.com

PropertiesAppearance ...................... Water white liquidFragrance ........................ CitrusReady to use..................... YesSpecific gravity………....... 0.799Flash point ....................... 105 º Fd’Limonene content........... 50%VOC content ..................... 97%

Active Ingredients CAS Numberd’Limonene..................................................................................…………............................. 5989-27-5Mineral Spirits.......................................................................................................................... 64742-47-8Poly (oxyethylene) Nonylphenol............................................................................................... 9016-45-9Etholylated Octyl Phenol…………………………………………………………………....... 9036-19-5


108

108

This powerful spot cleaner is designed to remove heavy grease, oil, and ground-in stains from carpets, rugs, and upholstery. It contains special clean solvent, so that tough stains are dissolved quickly and washed away with water easily. Use wherever heavy grease and oil stains call for extra cleaning power.

DIRECTIONS: Spot treatment of extremely soiled areas: Spray on area to thoroughly wet carpet fibers. Brush lightly into fibers with a circular motion, then gently rub out stain with a clean, damp cloth. Follow this spot treatment with a thorough cleaning of the entire carpet.

CLEAR SPOT SOLVENT CARPET

SPOTTER

REMOVES OIL & GREASE STAINS ON RUGS, CARPET & UPHOLSTRY

CAUTION: VAPOR HARMFUL. Use

only with adequate ventilation. Harmful if swallowed. See side panel for further cautions and first aid instructions.

KEEP OUT OF REACH OF CHILDREN

Yarn pad cleaning and hot water extraction: This spot remover mixes with all types of detergents and shampoos, and increases their effectiveness in cleaning oily or greasy stains. Mix the shampoo according to directions, then add this solvent carpet cleaner at the rate of 2 to 3 ounces per gallon of detergent solution. Shampoo or extract normally.

CAUTION: VAPOR HARMFUL. Contains trichlorethelyene. Use only in well ventilated area. Avoid prolonged breathing of vapor or contact with eyes, skin, or mucous membranes. In case of contact, flush with plenty of water for at least 15 minutes. If inhaled, remove person to fresh air and obtain medical attention. If swallowed, give several glasses of water and induce vomiting. Call physician immediately.

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE, UTAH 84054 PHONE 801-295-5022 OUT SIDE SALT LAKE AREA 1-800-366-5022

109

109

DEODORIZED DEGREASER DIRECTIONS: Deo-Solv may be diluted with up to 8 parts diesel oil or mineral spirits. Apply with sprayer, brush or mop directly to dry surface. Let stand for 3 to 10 minutes to allow for maximum penetration. Additional scrubbing aids in loosening heavy grime. Apply this product to the surface before surface area is wetted with water, this will insure maximum penetration. DESCRIPTION: A safe but powerful industrial strength multipurpose flooring adhesive remover that even removes linoleum. Proven when properly used it works better than other degreasers. This solution is specially formulated to remove multi-purpose adhesives but it is also a very effective cleaner. It cleans everything from greasy machinery to paint covered hands. Removes everything from blood stains to oil marks to chewing gum, on just about any type of surface. The applications are unlimited. Deo-Solv is proven to be non-toxic and a non-irritant. It can be used to safely clean grease or tar from skin. It is also reusable, dirty solvent placed in a container will separate. Contaminants settle to the bottom, allowing clean Deo-Solv to be poured off from the top. This product was developed to contain no odor or a nice fragrance when being used for all kinds of jobs. Available fragrances: orange, cherry, lime, mint, spice, or no odor. AREAS OF USE: Auto, truck, machine shops, railroads, airplanes, farm equipment, shop floors, transmissions and marine equipment. This product works well in parts washer in shops of all kinds. Can be used on carpeting, fabric, ceramic tile, painted surfaces, wallpaper, cement, wood, metal, aluminum, plexiglass, most plastics and skin. EFFECTIVELY REMOVES: Chewing gum, Oil, Crayon, Fresh paint, Blood, Waxes, Cosmetics, Tar, Grease, Asphalt, Duplicator Ink, Scuff marks, Adhesive Residue, and Multipurpose Adhesives. CAUTION: FOR INDUSTRIAL AND INSTITUTIONAL USE ONLY. KEEP OUT OF THE REACH OF CHILDREN. LYN DISTRIBUTING 965 N. Redwood Rd. NSL, UT. 84054

110

110

ENVIROMENTALLYFRIENDLY

Description: This product is an effective blend of heavy duty solvents and other degreasers.Fast acting and thorough, this cleaner makes the dirty jobs easier to handle. An excellentproduct for use in machine shops, automotive shops or any place where the removal of dirt andgreasy soils from metal surfaces is important. Contains no chlorinated solvents.DIRECTIONS: Spray this product on parts or brake area to clean dirt, dust, grease, and othercontaminents off brakes and other parts. Use of a chemical resistant sprayer or a aircompressed sprayer is recommended for application to keep vapors at a minimal level. Thisproduct will evaporate extremely quick leaving no film.

Health Hazard Data: Harmful or fatal if swallowed. Contains petroleum distillates. Ifswallowed, DO NOT INDUCE VOMITING. Call a physician immediately. Avoid prolongedor repeated breathing of vapors. Extremely flammable. Do not use near fire, flame, or whilesmoking. Contents under pressure. Do not puncture or incinerate container. Do not expose toheat or store at temperatures in excess of 120°F.Keep out of reach of children. HMIS FLAMMABLE RATING: 4 Meets or exceeds currentCalifornia V.O.C. requirements.

Product Specifications:

USDA Category: N/A Classification: Solvent Based Cleaner \ Degreaser General Appearance: Clear Liquid Color: Colorless Odor: Hexane, Alcohol pH: N/A Vapor Pressure At 70°F: 85-100 psig Flammability: Extremely flammable as

per CPSC Flame Projection Test NFPA Code 30B: Level 3

Lyn Distributing 965 North Redwood Road North Salt Lake, Utah 84054Phone in Salt Lake Area 295-5022 Phone anywhere in the U.S.A. 1-800-366-5022

111

111

DESCRIPTION : A specific blend of solvents, penetrants and emulsifiers to provide fast action removal of asphalt and tar deposits. ADVANTAGES: The jelled multiple solvent action goes to work immediately. Unexcelled for deep penetration. Powerful emulsifying action floats away deposits. Reduces chipping and scraping. The jelled liquid clings to vertical surfaces for maximum cleaning performance with no waste from run off. Free rinsing. Easy to use - reduces maintenance time. Will not harm most painted surfaces. RECOMMENDED For: Removal of asphalt and tar deposits from most painted and bare metal surfaces on equipment and tools of black-top contractors, roofing contractors, municipal and fleet operators. APPLICATION: Apply, as is for maximum performance, by spray, brush, mop and wiping. For light deposits allow to stand 5 to 10 minutes, for medium deposits 1 hour and for heavy deposits up to 12 hours (overnight). Reapplication of product during standing will provide greater penetration. For extremely heavy deposits apply and let stand for 1 hour – brush or scrap lightly and reapply to let stand up to overnight. For final removal flush with water from hose nozzle or high pressure cleaning equipment. Always apply this product to dry surface before water is on surface for effective asphalt and tar removal. For immersion of tools this concentrate can be diluted with up to two parts kerosene, light fuel oil or mineral spirits for further economy. NOTE – Under normal use conditions and when used according to directions, the product will not adversely affect painted surfaces. However, we recommend applying the product to a small test area before proceeding with large scale cleaning operations.

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD NORTH SALT LAKE, UTAH 84054 PHONE IN SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 1(800)366-5022

THICK CLINGING EMULSIFIABLE

D-TAR

112

112

Description: Our recommended product which has a jell consistency like latex paint, because it is jelled it does not runoff vertical surfaces and stays in place to work longer and better than other degreasers. Has a controlled drying time and may be washed off with pressure water as long as 8 hours after application. Is the premium product for removing heavy grease, oil, tar, asphalt, bitumen, road film. Since it works better when jelled, dilution with kerosene is not recommended as it will lose its jell characteristic. It can be diluted with up to 7 parts of kerosene if jell is not needed on horizontal surface. Advantages: • Harmless to most finishes. • Economical • Will not run off vertical surfaces. • No separation • May be diluted • Water Emulsifiable Areas of Use: Cleans and degreases motors on automobiles, trucks, tractors, airplanes, lawn mowers, boats, etc. Excellent for cleaning and municipal equipment, concrete floors and driveways, boat bilges, vertical surfaces, ceilings, and hard to reach areas. Removes tar, asphalt, and grease from all types of vehicles, equipment and masonry surfaces such as brick, stone, concrete, etc. It emulsifies tar, asphalt bitumen and asphalt based plastic cements and mono-form compounds used by roofers. Caution: Contains combustible solvents. Use with adequate ventilation. May cause eye or skin irritation. Wash well with soap and water. Keep out of reach of children.

LYN DISTRIBUTING 965 NORTH REDWOOD NORTH SALT LAKE, UTAH 84054 PHONE (801)295-5022 OUTSIDE SALT LAKE AREA (800)366-5022

• Flowable jell • Slight odor • Biodegradable • Slow Evaporation rate • Non-Corrosive

113

113

EMULSIFIABLE SOLVENT DEGREASER SAFE FIRE POINT - SUPERIOR PENETRATION AND EMULSIFICATION

DESCRIPTION: A heavy duty emulsifiable solvent degreaser composed of petroleum distillates, emulsifiers, wetting and penetrating agents. Designed to loosen and combine with oils, greases, and soils, so that when flushed with hot water, an emulsion (soap-like) compound is formed, then is easily rinsed away. Most useful is cleaning and degreasing automobiles, trucks, tractors, farm equipment, trailers, road building equipment, fork lifts, industrial and manufacturing machinery, stainless steel, tar and asphalt equipment, concrete floors, filters, grease traps, bearings, parts, and etc. May be used on any surface not harmed by kerosene. DIRECTIONS: HEAVY SOIL: Use compound undiluted. Spray on to surface and slow soak 10-15 minutes. Flush off with water under pressure. Brushing helpfull if soil is very heavy. LIGHT SOIL: Use compound diluted up to 2 parts with kerosene. Spray on the surface, and allow to soak 10-15 minutes. Flush off with water under pressure. CAUTION: HARMFUL OR FATAL IF SWALLOWED Contains petroleum distillates. If swallowed, do not induce vomiting. Call physician immediately. Avoid contact with eyes or skin. Combustible. Do not use or store near or open flame. Keep container closed when not in use. Rinse empty container before discarding. KEEP OUT OF REACH OF CHILDREN!

LYN DISTRIBUTING 965 N. Redwood Rd. N.S.L., UT 84054 Phone (801)295-5022 Outside S.L.C. area (800) 366-5022

114

114

SEWAGE TREATMENT PLANTS •• LIFT STATIONS •• GREASE SUMPS

Dissolves Scum Cake •• Prevents Solidification of Grease •• Controls Odors

As raw sewage flows into lift station wet wells to be pumped to treatment facilities, accumulations of sewage, grease, oils, fatty acids, and calcium and magnesium soaps form deposits on the walls. These deposits reduce the volume capacity of wet wells, and by their natural decomposition process, emit offensive odors. To return lift station to optimum efficiency, this accumulation of debris must be removed or substantially reduced. This highly specialized product is formulated to be fast breaking emulsification system possessing degreasing and detergent properties which cleans the vertical surfaces of lift stations, wet wells, and similar treatment facilities. This product is added directly to lift station wet wells in its concentrated form for effortless cleaning. Use this product to prevent grease build-up after scum blanket is eliminated. Allow one gallon of LSC-3 to drip into influent every 24 hours, this is at a rate of 45 drops per minute to establish ½ to 1 ½ ppm. For pumping stations, wet wells and sewer lines - Add product directly into force mains and sewer lines as needed to remove grease build-up. Product may be dripped directly into wet wells and pumping stations. Product is not affected by temperature and may be used in sub-freezing temperatures.

To eliminate scum cake and liquefy grease – Through any port or inspection opening, add 20 to 25 gallons of product immediately followed by the addition of 500 to 2000 gallons of water. Wet down the top surface area of scum cake with water daily. Daily addition of 1 to 2 gallons of product in the sludge compartment will allow effective and continuous treatment of both top and bottom of grease cake. Circulation should be continued as usual.

To free sticking floating digester covers - Pour product around edge of covers and wet down with water. Repeat as required.

Available in 5 fragrances: citrus, cinnamon, floral, cherry, or wintergreen. Available in: 6 – 1 gallon bottles, 6 gallon pail, 15 gallon drum, 30 gallon drum, or 55 gallon drum.


MIXES WITH WATER

115

115

SEWAGE TREATMENT PLANTS •• LIFT STATIONS •• GREASE SUMPS

Dissolves Scum Cake •• Prevents Solidification of Grease •• Controls Odors

As raw sewage flows into lift station wet wells to be pumped to treatment facilities, accumulations of sewage, grease, oils, fatty acids, and calcium and magnesium soaps form deposits on the walls. These deposits reduce the volume capacity of wet wells, and by their natural decomposition process, emit offensive odors. To return lift station to optimum efficiency, this accumulation of debris must be removed or substantially reduced. This highly specialized product is formulated to be fast breaking emulsification system possessing degreasing and detergent properties which cleans the vertical surfaces of lift stations, wet wells, and similar treatment facilities. This product is added directly to lift station wet wells in its concentrated form for effortless cleaning. Cleaning and degreasing is accomplished by the rise and fall of the water level. As the water fluctuates, the cleaner removes the debris from the sides of the wet well. A secondary property of this unique product is its ability to ‘seal’ or contain offensive odors which emit from the lift station.

For pumping stations, wet wells - Add product directly into force mains and sewer lines as needed to remove grease build-up. Product should be added to wet wells until a layer of 8 to 12 inches is floating on the surface. This initial treatment should remain effective for a period of three to six months, depending upon system demands. Product is not affected by temperature and may be used in sub-freezing temperatures.

Available in 5 fragrances: citrus, cinnamon, floral, cherry, or wintergreen. Available in: 6 – 1 gallon bottles, 6 gallon pail, 15 gallon drum, 30 gallon drum, or 55 gallon drum.


FLOATS ON WATER

116

116

MARK & VANDAL REMOVER • For Removal of Ink • Powerful Solvent Blend • Removes even permanent marks!!


Are your kidding? Just open your eyes and look around.

Mark & Vandal Remover is formulated to remove ink, felt tipped marker, ballpoint, pencil, crayon or lipstick from such surfaces as formica, plexiglass, glass, metal, P.V.C., polypropylene, painted surfaces, etc. Excellent for removing spray paint from painted surfaces. It can be wiped on or applied with a hand sprayer and then wiped off. Tougher jobs may require scrubbing or repeated applications. Ready to use.

Apply to surface by wiping on or with a hand sprayer. Allow to remain on surface for 30 to 60 seconds and wipe clean. For stubborn marks, repeat the process and work the product in with a soft nylon brush or soft cloth. When finished, wipe the surface clean with detergent and water, then rinse. Pre-test painted surfaces in an inconspicuous area to determine if safe. Use above 45ºF and only on dry surfaces.

Description

Areas of Use

Directions

117

117

REMOVES BALL POINT INK, CRAYONS, LIPSTICK, MAGIC MARKER, TAPE MARKS, ROAD TAR, SPRAY PAINT, SCUFF MARKS,

STENCIL AND PRINT INK! This potent vandal mark remover will wipe away paint, marker, ink lipstick, and other marks from walls, lockers, rest room stalls, concrete, reflective road signs, formica counters, desk tops, buses and trucks, interior seats, parks department outdoor stainless steel toilets, mirrors and most all metal surfaces. This vandal remover removes marks that other vandal removers leave behind. This product is non-aerosol so you use 100% of the product, it's very economical. This product may be used on all porcelain tile, glass, marble, stone and most formica. Use caution when applying to synthetic surfaces, vinyl, paints, and certain plastics. Test the surface by applying in an inconspicuous area first. DIRECTIONS FOR USE: Apply to a clean cloth and wipe across the mark to be removed. Difficult marks may require the user to make 6 to 10 passes across the mark. This product does an excellent job of removing marks prior to repainting, it stops vandal marks from bleeding through paint. To remove vandal marks from unpainted concrete apply by spraying directly on the vandal marks to be remove, then brush with a stiff brush to clean the concrete pores. Absorb the material with a cloth after brushing. DANGER: HARMFUL OR FATAL IF SWALLOWED. POISON- CONTAINS METHANOL. AVOID PROLONGED CONTACT WITH SKIN OR BREATHING OF VAPOR. USE ONLY IN A WELL VENTILATED AREA. LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE, UTAH 84054 PHONE IN SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE 800-366-5022

118

118

ODOR MASKING AND GREASE CONTROL TREATMENT Spice •• Cinn-Apple ••Citrus ••Berry

• Penetrating Pleasant Aroma Effectively Masks Any Odors That Are Present • Reduces Grease Buildup • High Solvent Action Reduces Clogging - Helps Keep Sewage Systems Clean and Free-

Flowing • Dilutes with 4 to 100 Parts Water Depending on Severity of Odor or Grease

• Improves Working Conditions - Eliminates public Complaints Areas of Use: Sewage Disposal plants •• Waste Areas •• Refuse Cans and Trucks •• Manure Piles •• Solvent For the Removal of Grease, Oil, Detergents, Tar & Sludge •• Sludge Beds •• Drains and Grease Traps •• Warehouses Under Dock Plates •• Automotive Hoists

Application - Sewage Treatment Plants • Removal of Grease and Fatty Deposits: Dilute 1 to 25 parts M.O.C. per million gallons of sewage flow and drip at the sewage plant out fall, or incoming water flow. Use in lift stations, trickling filters, etc. using spray method of application, spray full strength on grease foam or blankets on aeration tanks, digesters, lift stations or where a gross buildup of grease or fatty deposits is evident. Using drip method of application, use full strength or dilute 1 part M.O.C. with 25 parts water at a rate of 4 to 20 parts M.O.C. per million parts of water or sewage flow. This will effectively mask existing odors and reduce buildup of grease, and other materials in which bacteria can reproduce and create bad odors. Land Fill Areas: Dilute 4 parts M.O.C. with 100 parts water for treating land fill areas. Apply by spray at the rate of 50 gallons to each 1,000 square feet to adequately cover obnoxious odors. Refuse Trucks and Containers: Use as is and spray on containers or trucks to remove heavy grease & fatty deposits. Pleasant fragrance masks odors while cleans and degreases. Grease Traps and Sumps: For controlling sour odors from grease traps and sumps pour directly in grease trap and let the emulsifying action dissolve the grease and sludge and control odors. Use 1 pint M.O.C. per grease trap every 2 weeks for preventive maintenance. Other Purposes Mix 1 part M.O.C. with 4 to 25 parts for Spray application, depending on the severity of odors and grease to be controlled. * Always add water to M.O.C. to make emulsions. Never M.O.C. to water when diluting product.

Lyn Distributing 965 North Redwood Road North Salt Lake, Utah 84054 Phone in Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

119

119

DIRECTIONS FOR USEALTHOUGH THIS PRODUCT IS SAFE TO USEON MOST PLASTICS AND PAINTED SURFACES,BE SURE TO PRETEST BEFORE USING.Drains, grease traps and septic tanks: To keepdrain lines open, pour 4-8 ounces into drain,allow to stand for one hour, then flush with hotwater. In garbage disposals, allow to stand 5-10minutes, flush with hot water. Built up greasedeposits: Mix 4 oz. of Natural solv-x to onegallon of warm water.Apply generously to floors, walls, equipment,etc., with sponge , rag or sprayer, allow to workfor approximately 5 minutes,then scrub orbrush with floor machine or broom, then rinsewith clean water, or pickup with floor machine.Odor control: Mix 2-10 ounces of Natural solv-xto one gallon of cold water. Apply with sprayerto odor problem areas. Wet wells, sewer linesand pumping stations: Drip directly intopumping stations and wet wells.Tar removal: Dilute 12oz. to 64oz. Natural solv-xto 1 gallon of water, apply to tar by spraying orpouring directly on tar to be desolved, allow towork for 20 minute to 2 hours, then wipe off orpressure wash off.

NATURAL SOLV-XCLEANER

DEGREASER

A NATURAL CITRUS SOLVENTWITH EXCELLENT

DEODORIZING, ANDDEGREASEING POWER

*NON ACID*NON CAUSTIC

*NON CORROSIVE TO METAL*PLEASANT FRAGRANCE

*BIODEGRADABLE*ENVIRONMENTALLY FRIENDLY

*SUPER CONCENTRATE

This pleasantly scented product isideal for removing oily films frommetal surfaces or concrete floors,unclogging drains and grease traps,removing tar from most hardsurfaces,cleaning motors, removingadhesives and decals, and manyother uses.

USES/BENEFITSNatural solv-X contains no hazardouscomponents.Natural solv-x controls odors in problemareas.Natural solv-x is dilutable with water.Natural solv-x has excellent solvency.Natural solv-x is highly concentrated foreconomy.Natural solv-x maintains drains, greasetraps and septic tanks.Natural solv-x cleans greasey floors,walls and equipment safely.Natural solv-x removes rubber tiremarks and adhesives.

LYN DISTRIBUTING965 NO. REDWOOD ROADNO. SALT LAKE, UTAH 84054PHONE 801-295-5022OUTSIDE SALT LAKE AREA 800-366-5022

120

120

This all-natural degreaser uses the cleaning ability of D-Limonene from orange peel extract. The powerful cleaning solvent will remove heavy grease and oils from parts and equipment - even tar and asphalt - without harming most paints. The pleasant citrus odor makes it ideal for use in parts washers. It deodorizes as it works for great results in kitchen areas, too! For parts washing and equipment cleaning, and general all-purpose degreasing, use as is. On heavy tar and asphalt accumulations, allow to penetrate for several minutes. For lighter cleaning, use diluted with mineral spirits. This clean solvent quickly dissolves gum, wax and tar from rugs, carpets, and upholstery without staining or obnoxious fumes. Use it to clean and degrease concrete or masonry easily. The emulsifiable formula assures fast penetration of deposits - flush with a hose to wash away-emulsified dirt and grease. Helps to prepare wood or concrete floors for resurfacing - without the harmful fumes of chlorinated solvent cleaners. Do not apply undiluted ORANGE DEGREASER directly to resilient flooring.

NATURAL SOLV-X-PLUS

ORANGE DEGREASER

WITH THE POWER OF D-LIMONENE

CLEAN AND ALL NATURAL POWERFUL SOLVENT CLEANER MULTI-PURPOSE DEGREASER

CONTAINS NO PETROLEUM DISTILLATE

CAUTION – COMBUSTIBLE: May be harmful if swallowed. Keep away from heat or open flame This natural solvent even has the power to loosen rubber carpet backing or adhesives from sub-flooring. Simply spray undiluted onto the residue, allow several minutes to penetrate, then hose off! To degrease and deodorize dumpsters and garbage cans, dilute up to 1:20 with warm water. In kitchen areas, use it undiluted on heavy grease and carbon build-up, or add it to mop water for extra power on greasy dirt. Deodorizes as it cleans, too! Just add 1 to 3 ounces per gallon of warm water along with your regular detergent. CAUTION: May be harmful if swallowed. Keep away from heat or open flame. Use with adequate ventilation. Avoid prolonged contact with skin. FIRST AID: External - Flush with water. Internal - Do not induce vomiting. Call physician immediately. Eyes - Flush eyes and under eyelids with water for at least 15 minutes. If irritation persists, obtain medical attention. KEEP OUT OF REACH OF CHILDREN

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD, NORTH SALT LAKE, UTAH 84054 PHONE 295-5022 OUTSIDE SALT LAKE AREA 800-366-5022 FAX 801-295-5044 WWW.LYNDIST.COM [email protected]

121

121

NATURAL-SOLV-X PRODUCT DATA SHEET

REVISION DATE 10/10/94 Natural-solv-x is a biodegradable solvent occurring in nature as the main component of citrus peel oil. Natural-solv-x's interesting chemical properties, pleasant citrus aroma, & FDA-GRAS rating ("generally recognized as safe") have earned the product phenomenal acceptance in many diverse chemical applications. Natural-Solv-X can be used in its pure form, blended with most other solvents & drying oils, or easily emulsified to make water soluble cleaning products.

USES & APPLICATIONS: replacement for toxic chlorinated solvents, glycol ether, MEK (methyl ethyl ketone), xylene, freon, and CFCs, parts cleaner, engine degreaser (automotive, aircraft, and aerospace industries), electronics cleaning, tar and asphalt remover, asbestos shingle remover, graffiti remover, grease trap maintainer, lift station and sewage treatment applications, hand cleaner, floor cleaner, printing press cleaner, carpet stain cleaner, metal cleaner, aerosol ingredient, fragrance additive, odorant for petroleum industry, heat transfer medium, and possible candidate for a variety of medical applications including cancer and AIDS research.

TYPICAL ANALYSIS: Technical Grade Boiling Point 310*F Flash Point (TCC) 115'F Specific Gravity @ 25oC 0.838 - 0.843 Refractive Index @ 20*C 1.471 -1.474 Optical Rotation +96' - +104' Vapor Pressure @ 20'C 2mmHg Evaporation Rate (Ether = 1) less than 1 Solubility in Water complete Kauri-Butanol Value 62.7 Pound Per Gallon @ 25'C 7.1 Viscosity @ 25*C water thin

Min.d-limonene by GC (% uncorrected) 90% (95% typical) Dielectric Strength 25,000 volts Appearance and odor clear liquid, variable colorless to yellow cast with strong citrus odor CLASSIFICATIONS: Chemical Name & Formula (TSCA Inventory): Cyclohexene, 1-methyl-4-(l-methylethenyl)-, (R) Common Names: citrus terpenes, orange terpenes, menthadiene. CAS Number: 5989-27-5 WHMIS Class: Class B - Division 3; Combustible Liquid / Class D - Division 2B

SHIPPING CLASSIFICATIONS: Proper Shipping Name: TERPENE HYDROCARBONS, N.O.S. Label / Placard [exemption §173.150( f) applies]: Hazard Class: 3 ( 3.3 for Canada) Identification No.: UN2319 Packing Group: Highway / Rail: per requirements for COMBUSTIBLE LIQUIDS Air / Ship: per requirements for FLAMMABLE LIQUIDS 1. NTP, OSHA, & IARC do NOT list product as carcinogenic to humans. 2. Unused product is NOT listed by EPA as hazardous waste (40CFR Part 261). 3. Natural solv-x is NOT listed on California's Prop. 65 toxic substance list. 4. Natural solv-x is listed on EPA's Chemical Inventory (PL94-469); however, it is NOT on EPA's CORR (Chemicals of Regulatory Rules) list, which contains those materials which pose a health or environmental risk. 5. Natural solv-x does NOT contain lead, cadmium, mercury, or hexavalent chromium or come in contact with these chemicals

since it is a citrus derived essential oil produced by steam distillation. Further, Natural solv-x is packaged in food grade containers with inert liners that do NOT contain lead, cadmium, mercury, or hexavalent chromium. 6. Natural solv-x does NOT contain and is NOT manufactured with any of the Class I or 11 ozone-depleting substances listed under the United States Clean Air Act of 1990. 7. Since Natural solv-x is a combustible liquid, it is hazardous under OSHA 29CFR 1910.1200. Natural solv-x does require an MSDS sheet.

EMERGENCY PHONE NUMBERS In the United States In Canada CHEMTREC 800-424-9300 CANUTEC 613-996-6666 VOC INFORMATION Natural solv-x is a naturally occurring VOC. Natural solv-x is reportable as 95% VOC (850 grams per liter, 6.8 lbs. per gallon). Emulsions containing Natural solv-x are sometimes exempt from VOC regulation. Contact state VOC authorities for ruling. NJ RIGHT TO KNOW d-limonene 5989-27-5 myrcene 123-35-3

alpha-pinene 80-56-8 linalool 78-70-6 octanal 124-13-0

HMIS: Health 1 Flammability 2 Reactivity 0 Protection G SARA TITLE III Not listed as reportable substance No reportable quantity (RQ) limit

122

122

This all-natural degreaser uses the cleaning ability of D-Limonene from orange peel extract mixed with soy. The powerful cleaning solvent will remove heavy grease and oils from parts and equipment - even tar and asphalt - without harming most paints. The pleasant citrus odor makes it ideal for use in parts washers. It deodorizes as it works for great results in kitchen areas, too!

For parts washing and equipment cleaning, and general all-purpose degreasing, use as is. On heavy tar and asphalt accumulations, allow to penetrate for several minutes. For lighter cleaning, use diluted with mineral spirits.

This clean solvent quickly dissolves gum, wax and tar from rugs, carpets, and upholstery without staining or obnoxious fumes.

Use it to clean and degrease concrete or masonry easily. The emulsifiable formula assures fast penetration of deposits - flush with a hose to wash away-emulsified dirt and grease. Helps to prepare wood or concrete floors for resurfacing - without the harmful fumes of chlorinated solvent cleaners. Do not apply undiluted Natural Solv 2000 directly to resilient flooring.

NATURAL SOLV-2000

ORANGE/SOY DEGREASER

WITH THE POWER OF D-LIMONENE

& SOY. CLEAN AND ALL NATURAL POWERFUL SOLVENT CLEANER MULTI-PURPOSE DEGREASER

CONTAINS NO PETROLEUM DISTILLATE

CAUTION – COMBUSTIBLE: May be harmful if swallowed. Keep away from heat or open flame This natural solvent even has the power to loosen rubber carpet backing or adhesives from sub-flooring. Simply spray undiluted onto the residue, allow several minutes to penetrate, then hose off! To degrease and deodorize dumpsters and garbage cans, dilute up to 1:20 with warm water. In kitchen areas, use it undiluted on heavy grease and carbon build-up, or add it to mop water for extra power on greasy dirt. Deodorizes as it cleans, too! Just add 1 to 3 ounces per gallon of warm water along with your regular detergent. CAUTION: May be harmful if swallowed. Keep away from heat or open flame. Use with adequate ventilation. Avoid prolonged contact with skin. FIRST AID: External - Flush with water. Internal - Do not induce vomiting. Call physician immediately. Eyes - Flush eyes and under eyelids with water for at least 15 minutes. If irritation persists, obtain medical attention. KEEP OUT OF REACH OF CHILDREN

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD, NORTH SALT LAKE, UTAH 84054 PHONE 295-5022 OUTSIDE SALT LAKE AREA 800-366-5022 FAX 801-295-5044 WWW.LYNDIST.COM [email protected]

123

123

Replaces traditional toxic solvents for the following applications:

• Manual and Automatic Precision Cleaning Systems

• Automatic Parts Cleaners • Ultrasonic Cleaners • Degreasing

• Agitated Tank Cleaners • Heavy Lubricant

Degreasing • Precision Cleaning • Chip Board Cleaning • Engine Degreasing

• Paint Brush Cleaning • Air Brush Paint Clean-up • Mold Release Agents • Manual Spray and Wipe

Cleaning

High Grade Precision Cleaning Solvent for Technical Applications...

• Non-toxic, Renewable • Eliminates Water Rinse • No H2O Corrosion risk • Dries Faster Than Water

• 100% Biodegradable • Excellent KB Value (>1000) • Dries Without High Combustibility • 90% Recovery Through Distillation

Product Specifications ………Dangerous goods class: 3 Physical state: Liquid Odor: No fragrance added Color: Clear pH concentrate: N/A Net weight: 8.3 lb/gal Specific Gravity: 1.035 Molecular Weight: N/A Solubility in water: Complete Rinsibility: Excellent Surfactants: None

Abrasives: None Flash point: >139ºF. ASTM D93 closed cup Boiling Point: 309°F Vapor Pressure @ 68°F: 1.7mm Hg Evaporation Rate: 0.22 Volatile by volume: 100% Toxicity: N/A Biodegradable: Yes, begins at 5 days in water Kauri-Butanol Value: >1000

Natural Solv-CE

Made From Biodegradable

Corn Oil

A Green Earth Product From Lyn Distributing

High Performance, precision cleaning, 100% biodegradable Solvent!



124

124

A Earth Friendly Product From Lyn Distributing

Formulated for use in applications where rinsibility is critical, Natural Solv-S is tested and proven to be a safe, effective and powerful product for use in many industries including:

• Industrial/Manufacturing • Electronics • Paint Gun Clean-up • Asphalt Maintenance • Graphic & Jet Ink Clean-up • Graffiti Removal • Grease & Oil Clean-up • Mastic Removal

• Adhesive Removal • Heavy Lube Clean-up • Tar & Asphalt Removal • Decal Removal • Hydrocarbon Cleaning • Rubber Compound Cleaning • Paint Clean-up

One of the safest, most economical degreaser / cleaners available today... • Non-toxic • Excellent Rinsibility • Non Abrasive • Concentrated, Economical

• Biodegradable • High Flash Point • No Caustic Fumes • Stronger Cleaning Power

________ Product Specifications ________

Dangerous goods class: Non-hazardous Physical state: Liquid Odor: No fragrance added Color: Pale Yellow pH concentrate: N/A Net weight: 7.92 lb/gal Specific Gravity: 0.946 Molecular Weight: N/A Solubility in water: Complete Rinsibility: Excellent Surfactants: Non-toxic

Abrasives: None Flash point: >150°F ASTM D93 closed cup Boiling Point: 292°F Vapor Pressure @ 68°F: 0.9 mm Hg Evaporation Rate: 0.0098 Volatile by volume: % VOC's 0 grams per liter Toxicity: N/A Biodegradable: Yes, begins at 28 days in soil or 7 days in water Kauri-Butanol Value: >70

Natural Solv-S Biodegradable, Non-toxic Solvent Cleaner Made From Farm grown

plants! Contains No V.O.C’S



125

125

Medium Viscosity Paint Remover Developed For Building Restoration Projects. Made For Use through

a Sprayer. •• Removes a Wide Variety of Paints and Coatings •• Removes Grease, Oil, Tar, Carbon. ••

Rapid Blistering Action •• Clings to Vertical Surfaces •• Washes Off With Water

This medium viscosity, solvent based paint stripper is formulated for the rapid thorough removal of oil based paints, varnishes, lacquers, shellacs, adhesives, reflector tapes, bakelites, epoxies, urethanes, oils, grease and carbon deposits from wood , metal, terrazzo or concrete surfaces. This heavy duty product penetrates through paints and coatings to break the bond and cause a blistering effect. Due to the viscosity, this product will cling to vertical surfaces to accomplish difficult stripping operations.

Directions For Use: Open large bung slowly to allow vapor pressure to be released. Apply product in its concentrated form, do not dilute. For best results, heavy accumulations of grease, oil, or dirt should be removed with a suitable degreaser or cleaner prior to stripping of coatings. Apply product to surface with a brush, sponge or spraying. Do not work the brush back and forth, apply by moving brush in one direction and letting the paint stripper to penetrate for a few minutes. Blisters and cracking will develop on painted surface with in a few seconds after product has been applied. Allow product to work through all layers of paint but do not allow the stripper to dry on surfaces. Remove with a scraper, putty knife or pressure washer. On concrete floors, coating and stripper may be removed with a floor squeegee. After removing clean all surfaces with suitable cleaner before repainting. Do not use on linoleum, asphalt tiles or similar surfaces. LYN DISTRIBUTING 965 NORTH REDWOOD ROAD, NO. SALT LAKE, UT. 84054 PHONE IN SALT LAKE AREA 295-5022 OUT SIDE SALT LAKE AREA 1-800-366-5022

126

126

P. W. S. PARTS WASHING SOLVENT LOW ODOR, NO NOXIOUS FUMES, CORROSION

INHIBITORS, ECONOMICAL, CONCENTRATE, DISSOLVES GREASE, OIL, INK, AND SLUDGE.

This solvent compound is specifically formulated for use in recirculating parts washer equipment. This product provides an economical and effective method for cleaning metal parts while being gentle on the hands. Grease, oil, dirt, sludge, grime, ink, light carbon and similar soils are dissolved with minimal soaking and brushing. Machine shops, garages, factories, industrial repair shops and automobile make-ready facilities will find this product to be an ideal compound for use in their recirculating parts washer units.

Specifications color……………………………….Green Odor……………………………….Petroleum Dilution……………………………Ready to Use Flash point…………………………> 105 Degrees F.

This product contains corrosion inhibitors to protect metal parts that have been cleaned with this product. These special inhibitors will stop parts from rusting and help protect parts if they are stored for long periods of time.

P. W. S. contains skin conditioners to condition your skin if it comes in contact with this product. LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE, UT. PHONE 801-295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

127

127

RINO CITRUS RINO CITRUS DEGREASERDEGREASER & TAR & TAR REMOVER REMOVER CONCENTRATECONCENTRATE Emulsifiable citrus degreaser. Does not contain petroleum distillates. Dissolves and removes: Grease, oil, tar, asphalt, bitumen, dirt, road oil, roofing compound, graffiti marks.

ENVIRONMENTALY SAFE - NO HARMFUL VAPORS BIODEGRADABLE - FRESH CITRUS FRAGRANCE

USE ON: TRUCKS, TRACTORS, TRAILERS, MOTORS, ROAD AND CONSTRUCTION MACHINERY, FARM EQUIPMENT, ROOFING EQUIPMENT, ASPHALT PLANTS, DRILLING MACHINERY, INDUSTRIAL PLANTS, SHOVELS, METAL TRIM, GUTTERS, DOWNSPOUTS, AND FLOORS. WORKS ON: CONCRETE, BRICK, STONE, AND METAL SURFACES. RINO is a new trend setting formulation that keeps pace with today’s safety and environmental regulations. Powerful natural deodoriziers and degreasers are blended to out perform the conventional hazardous solvent degreasers. RINO concentrate instantly emulsifies grease, oils and fats without the use of harsh acids, alkali, or petroleum solvents. RINO organic extract has an extremely strong natural citrus fragrance to deodorize effectively, even under the worst conditions. RINO has a wide variety of uses indoors and out. RINO will remove most resins, adhesives, printing inks, decals, tar, rubber tire marks and asphalt. RINO also is an effective drain cleaner, deodorizer and maintainer.

DIRECTIONS FOR USE: For heavy duty cleaning, degreasing and rubber tire mark removal on concrete, dilute RINO concentrate 1 to 9 with water until a uniform emulsion is formed. Let stand 2 minutes. Scrub thoroughly and rinse with water. For drain cleaning, use RINO straight and pour directly into drain - let stand for 2 hours and flush with hot water.

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NORTH SALT LAKE, UT. 84054 PHONE 295-5022 OUTSIDE DAVIS COUNTY SALT LAKE AREA 1-800-366-5022


128

128

T E C H N I C A L D A T A S H E E TT E C H N I C A L D A T A S H E E T _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ Product Name: Rino Citrus Degreaser Concentrate Item Number: D1022 Description: A new trend setting formulation that keeps pace with today's safety and environmental regulations. Powerful natural degreasers and deodorizers are specially blended to out perform the conventional hazardous solvent degreasers. This multi-purpose concentrate instantly emulsifies grease, oils and fats without the use of harsh acids, alkaline or petroleum solvents. This organic extract has an extremely strong natural citrus fragrance to deodorize effectively even under the worst conditions. The vapors from this product are not considered harmful. This allows for a wide variety of uses indoors as well as out. Ideal uses for this product include degreasing concrete floors, equipment, trucks, motors and metal surfaces. This product will remove most resins, adhesives, printing inks, decals, rubber tire marks, tar and asphalt and most soils that are removed by conventional solvent based degreasers. This natural solvent is an effective drain cleaner, deodorizer and main-tainer.

Directions: For heavy duty cleaning, degreasing and rubber tire removal on concrete floors: Dilute product 1 to 9 with water until a uniform emulsion is formed. Let stand 2 minutes, scrub thoroughly and rinse off. Surface Degreasing: Add 2 to 4 ounces of product to one gallon of water. Apply by spraying, brushing or mopping. Allow solution to stand for 5 minutes. Rinse thoroughly. Product may also be applied straight and pressure washed off with water. Drain Cleaning: Pour 6 to 8 ounces of product directly into clogged drain. Let stand for 1 to 2 hours. Flush drain with hot water. To control severe odors dilute 2 ounces of product with one gallon of water. Mixture can be sprayed or mopped onto surface. Areas for use include sewer plants, garbage trucks and dumpsters, industrial plants, restaurants, hospitals, schools, bathrooms and other similar areas.

WARNING: Contains monocyclic terpene. Combustible liquid. Use only in a well ventilated area. Do not use near heat, sparks, open flame or other sources of ignition. Do not smoke in use area. Eye and skin irritant. Avoid contact with eyes and prolonged contact with skin. In case of eye contact, flush with water for 15 minutes, then get prompt medical attention. For skin, wash with water. If irritation persists, get medical attention. Keep container sealed when not in use. KEEP OUT OF REACH OF CHILDREN. Container Disposal: Triple rinse container and discard according to local regulations. Spill Or Leakage Procedures: Absorb on inert material & collect in suitable containers for disposal. Spills may be diluted 1:20 with water & washed down sanitary sewers. Dispose of in accordance with all local, state and federal regulations. Product Specifications: USDA Category: C1 Classification: Cleaner/Deodorizer/Degreaser General Appearance: Clear Liquid Color: Orange Odor: Citrus pH: 9.0 - 9.5 Flash Point: 165ºF TCC

CAS NUMBERS: Monocyclic Terpene 5989-27-5; Butyl Cellusolve 111-76-2; Water 7732-18-5; Nonyl Phenol Polyethoxylate 9016-45-9; Dodecylbenzene Sulfonic Acid 27176-87-0. HMIS RATING: Health-2; Flammability-2; Reactivity-0; Personal Protection-B.

10/2003

129

129

EMULSIFIABLE SOLVENT DEGREASER CONCENTRATESAFE FIRE POINT - SUPERIOR PENETRATION AND EMULSIFICATION

DESCRIPTION:A heavy duty emulsifiable solvent degreaser concentrate composed of petroleum distillates,emulsifiers, wetting and penetrating agents. Designed to loosen and combine with oils, greases, andsoils, so that when flushed with hot water, an emulsion (soap-like) compound is formed, then iseasily rinsed away. Most useful is cleaning and degreasing automobiles, trucks, tractors, farmequipment, trailers, road building equipment, fork lifts, industrial and manufacturing machinery,stainless steel, tar and asphalt equipment, concrete floors, filters, grease traps, bearings, parts, andetc. May be used on any surface not harmed by kerosene.

DIRECTIONS:HEAVY SOIL: Use compound diluted 1 part Solv-X-7 to 4 parts petroleum distillate. Spray on tosurface and allow to soak 10-15 minutes. Flush off with water under pressure. Brushing helpfull if soilis very heavy.LIGHT SOIL: Use compound diluted up to 1 part with 10 parts kerosene. Spray on the surface, andallow to soak 10-15 minutes. Flush off with water under pressure.

CAUTION:HARMFUL OR FATAL IF SWALLOWED Contains petroleum distillates. If swallowed, do not inducevomiting. Call physician immediately. Avoid contact with eyes or skin. Combustible. Do not use orstore near or open flame. Keep container closed when not in use. Rinse empty container beforediscarding.

KEEP OUT OF REACH OF CHILDREN!

LYN DISTRIBUTING 965 N. Redwood Rd. N.S.L., UT 84054Phone (801)295-5022 Outside S.L.C. area (800) 366-5022

130

130

701-090203

NATURAL EZ LIFT DS Product #

All-natural floating lift station degreaser

Keeps lift station surfaces free of grease. As waste water levels rise and fall, heavy grease deposits are depositedon lift station walls. It coats the walls and surfaces of the lift station to remove heavy grease accumulationsquickly and safely. The special non-emulsifying formula floats on the surface of the water, so it continues toremove deposits as the water level changes. Contains a soybean oil derivative which does not evaporate as fast asother solvents, so it remains on the surface of wastewater longer to penetrate fats, grease and dirt and strip themaway from surfaces. Will not disrupt the natural biological digestion of bacteria in the lift station.

Use in Lift stations:Keeps walls, pumps hoses clean and functioning properly

Effective Against:l Floating grease balls l Heavy oil accumulation l Annoying odors

Features and Benefitsl Float on the surface so it will rise and fall with the level of the wastewaterl Quickly dissolves heavy grease and fat accumulations in a lift stationl Creates an odor absorbing barrier to control odors and leaves a pleasant citrus scentl Color indication lets you know when you need to add morel 100% natural biodegradable formula will not interfere in lift station bacteria

DirectionsUse approximately 1/2 gallon for every square foot of wastewatersurface area.

SafetyCaution: Combustible. May be harmful if swallowed. May irritate eyes and skin. Keep out of the reach of children.

Quantities55 gallon30 gallon5 gallon4 x 1 gallon/case6 x 1 gallon/case LYN DISTRIBUTING PHONE 1-800-366-5022 FAX 1-801-292-6196

PropertiesAppearance......................... Green liquidFragrance .......................... Citrus scentSpecific gravity……........... 0.88Flash point ........................ 165 º FVOC content (% by wt.)...... 5-15 %Solubility ........................... Insoluble in waterStability at 70 ºF ................. 1 year

Active Ingredients CAS NumberMethyl Ester of Soybean Oil…………………………………………………….………......... 67784-80-9d’Limonene …………………………………………………………………….…………..... 5989-27-5Green Dye………………………………………………….……………………………….... No CAS number



131

131

S P W S PARTS WASHING SOLVENT LOW ODOR, NO NOXIOUS FUMES, CORROSION

INHIBITORS, ECONOMICAL, CONCENTRATE, DISSOLVES GREASE, OIL, INK, AND SLUDGE.

This solvent compound is specifically formulated for use in recirculating parts washer equipment. This product provides an economical and effective method for cleaning metal parts while being gentle on the hands. Grease, oil, dirt, sludge, grime, ink, light carbon and similar soils are dissolved with minimal soaking and brushing. Machine shops, garages, factories, industrial repair shops and automobile make-ready facilities will find this product to be an ideal compound for use in their recirculating parts washer units.

Specifications color……………………………….Blue Odor……………………………….Petroleum Dilution……………………………Ready to Use Flash point…………………………> 140 Degrees F.

This product contains corrosion inhibitors to protect metal parts that have been cleaned with this product. These special inhibitors will stop parts from rusting and help protect parts if they are stored for long periods of time. S P W S contains skin conditioners to condition your skin if it comes in contact with this product. S P W S contains no chlorinated solvents or other CFC’s that are known to harm the environment. LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE, UT. PHONE 801-295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

132

132

USEFor cleaning grease, oil, wax, dyes, inks for electric motors, generators, starters, packagingmachinery, linotype machines, rollers and mats, air filters, brake and linings, relay andelectronic equipment, dye vats and molds in plastic manufacturing, automatic bowling pinsetters, parking meters, electric panels in grain elevators and many other similar uses.

PRECAUTIONSKeep containers sealed and away from open flames. Avoid prolonged breathing of vapor orcontact with skin. Do not take internally.May be harmful to plastic parts.Do not use on automated electronic or monitoring systems.Lubricate electric motors immediately after cleaning.

DIRECTIONSDo not dilute Safety Solvent. May be applied by hand sprayer or high-pressure spray. Whenused in dip tanks, keep tank sealed as much as possible. May also be wiped on with a rag thenwiped clean with clean rag.

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD, NORTH SALT LAKE, UTAHPHONE IN SALT LAKE AREA 295-5022 ANYWHERE IN U.S.A. 1-800-366-5022

133

133

SS-210 • Industrial Cleaning Solvent • Nonflammable & Nonconductive • Non-Ozone Depleting • Dries Residue Free • Medium Drying


Factories, automotive repair, bus companies, buildings, aircraft industry, printing industry, textile industry, diesel repair, oil industry, equipment re-building, machine shops, paint shops, electrical repair, marine sales and repair.

This medium-drying Industrial Safety Solvent has no flash point up to boiling, and is non-corrosive, and non-etching. This product is a medium-drying blend of non-flammable petroleum solvents formulated for the removal of grease, oil, wax, ink, lint, dust, mold release agents, some adhesives, and light carbon deposits. This highly effective safety solvent may be used to clean and degrease electric motors, automatic pinsetters, printed circuits, sewing machines, textile industry machines, printing presses, rollers, blankets, offsettype, watch and clock parts, radio and television components, precision parts, condenser and coils, generators and starters, electrical and mechanical equipment, typewriters and other office machines. With use of this product for regular maintenance and protection, fire hazards and losses are reduced, motor life is extended, down-time on equipment is reduced, and repair and replacement costs are minimized. Ready to use.

Electric Motors: Motors may be cleaned and degreased while in operation by spraying solvent into openings. Smaller motors may be cleaned by immersion. After cleaning is accomplished, motor should be blown dry with compressed air and relubricated to protect bearings. General Degreasing: Spray on and blow dry; spray on and wipe off; wipe on with brush or rag or use an immersion cleaner and air dry parts.

Description

Areas of Use

Directions

134

134

This fast-dry Industrial Safety Solvent has no flash point up to boiling, and is non-corrosive, and non-etching. This product is a fast-drying blend of non-flammable petroleum solvents formulated for the removal of grease, oil, wax, ink, lint, dust, mold release agents, some adhesives, and light carbon deposits without leaving a residue. This highly effective safety solvent may be used to clean and degrease electric motors, brake parts, automatic pinsetters, printed circuit boards, sewing machines, textile industry machines, printing presses, rollers, blankets, offset type, watch and clock parts, radio and television components, precision parts, condenser coils, generators and starters, electrical and mechanical equipment, typewriters and other office machines. With use of this product for regular maintenance and protection, fire hazards and losses are reduced, motor life is extended, down-time on equipment is reduced, and repair and replacement costs are minimized. Places to use SS-410: Factories, automotive repair, bus companies, buildings, aircraft industry, printing industry, textile industry, diesel repair, oil industry, equipment re-building, machine shops, paint shops, electrical repair, marine sales and repair. Use this product through our chemical resistant hand trigger sprayer or in a sure-shot compressed sprayer. If compressed air is available then product may be used through our #e86 gun. This gun siphons the product with the airflow through the gun. Lyn Distributing 965 North Redwood Road, North Salt Lake, Utah 84054 Phone in Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

Industrial Cleaning Solvent

Non Flammable & Non Conductive

Non Ozone Depleting Dries Residue Free Fast Drying

135

135

THE FAST EASY WAYTO REMOVE ASPHALT

AND TAR

• Multiple Solvent action goes towork immediately

• Unexcelled for deep penetration.• Powerful emulsifying action floats

away deposits.• Reduces chipping and scraping.• Free rinsing.• Easy to use - reduces maintenance

time.• Will not harm most painted

surfaces.

Contains special solvent seals to keep productworking for extended periods of time. Thisproduct has an extremely high KB value!

This heavy duty cleaner has been designed specifically for fast and easy removal of asphalt and tar depositsfrom equipment and tools. The superior solvent combination with solvent sealers in the formula has a highaffinity for asphalt and tar deposits, first with a softening and dissolving action that “digs” deep and secondlyone that holds residues in an emulsifiable form to be later flushed away with a water rinse. Maintenance ismade easy on road building, municipal, institutional or fleet equipment. Start using this product today andincrease the appearance and working value of your tools and equipment. This product works wll for black-top contractors, roofing contractors, municipal and fleet operators.

APPLICATION: Apply, as is for maximum performance, by spray, brush, mop and wiping. Forlight deposits allow to stand 5 to 10 minutes, for medium deposits 1 hour and for heavy and old deposits upto 12 hours (overnight). Reapplication of product during standing will provide greater penetration. For finalremoval flush with water from hose nozzle or high pressure cleaning equipment. For immersion of tools thisconcentrate can be diluted with up to 2 parts kerosene, light fuel oil or mineral spirits for further economy.Don’t dilute this product more than 1 part to 5 parts mineral spirits or you will loose the great penetratingquality of this product.

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD, NORTH SALT LAKE, UT.84054PHONE IN SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

136

136

DISINFECTANT

DIRECTIONS FOR USEIt is a violation of Federal Law to use this product in a manner inconsistent with it’slabeling. DQ-10 10% Solution is designed specifically for hospitals, foodprocessing plants, sanitization and deodorization is of prime importance.When used as directed, DQ-10 10% Solution is formulated to disinfect pre-cleaned,hard surfaces such as walls, floors, sink tops, tables, chairs, telephones, and bedframes.DQ-10 10% Solution deodorizes those areas which generally are hard to keep freshsmelling, such as garbage storage areas, empty garbage bins and cans, pet areas andany other areas which are prone to odors caused by microorganisms.In addition , DQ-10 10% Solution will sanitize previously cleaned and rinsednonporous food contact surfaces such as tanks, chopping blocks, counter tops,drinking glasses and eating utensils. DQ-10% Solution can also be used to sanitizepreviously cleaned food grade eggs in shell egg and egg processing plants.

DISINFECTION – To disinfect pre-cleaned, Inanimate, hard surfaces, apply DQ-10 10% Solution with mop, cloth sponge or mechanical sprayer so as to wet allsurfaces thoroughly. Allow to remain wet for 10 minutes, then remove excessliquid. For disinfection, a pre-cleaning step is required. Prepare a fresh solution foreach use.

DILUTION RATES:GENERAL DISINFECTION – Add 3 ounces DQ-10 10% Solution per 5 gallons ofwater for disinfection against Staphylococcus aureus, Salmonella choleraesuis,Listeria monocytogenes, and Yersinia enterocolitica.HOSPITAL DISINFECTION – Add 3 ½ ounces DQ-10 10% Solution per 5gallons water for disinfection against Psuedomonas aeruginosa.

OTHER USES:For disinfection of pre-cleaned surgical instruments, barber tools and dentalequipment, simply submerge instruments into solution containing 1 ½ ounces DQ-10 10% Solution per gallon of water for 10 minutes.For disinfection of pre-cleaned poultry equipment (brooders, watering founts,feeding equipment), animal quarters and kennels, apply a solution of 3 ½ ounces ofDQ-10 10% Solution per 5 gallons of water. Small utensils should be immersed inthis solution. Prior to disinfection, all poultry, other animals and their feed must beremoved from the premises. This includes emptying all troughs, racks and otherfeeding and watering appliances. Remove all litter and droppings from floors, wallsand other surfaces occupied and traversed by poultry and other animals.After disinfection, ventilate building, coops, and other closed spaces. Do not housepoultry, other animals or employ equipment until treatment has been absorbed, setor dried.ALL TREATED EQUIPMENT THAT WILL CONTACT FEED OR DRINKINGWATER MUST BE RINSED WITH POTABLE WATER BEFOR REUSE.

VIRUCIDAL ACTIVITY – DQ-10 10% Solution, when used on environmental,inanimate hard surfaces at 3 ½ ounces per 5 gallons of water exhibits effectivevirucidal activity against Influenza A/Japan ( representative of the common fluvirus), Herpes Simplex Type 1 (causative agent of fever blisters andmononucleosis), Adenovirus Type 2 (pox virus group), and Avian influenza A(causative agent of an acute avian lower respiratory tract infection).

SANITIZATION – Recommended for use in restaurants, dairies, food processingplants, and bars. When used as directed DQ-10 10% Solution is an effectivesanitizer against Escherichia coli, Yersinia enterocolitica, and Staphylococcusaureus.Remove all gross food particles and soil from areas which are to be sanitized with agood detergent, pre-flush, pre-soak or pre-scraped treatment. Rinse with a potablewater rinse. To sanitize pre-cleaned and potable water-rinsed, non porous, foodcontact surfaces, prepare a 200 ppm active quaternary solution by adding 1 ounceDQ-10 10% Solution to 4 gallons of water, 2 ½ ounces to 10 gallons of water, or 5ounces to 20 gallons of water.To sanitize immobile items such as tanks, chopping blocks and counter tops, floodthe area with a 200 ppm active quaternary solution for at least 60 seconds makingsure to wet all surfaces completely. Remove and let air dry. Prepare a fresh solutiondaily or more frequently as soil is apparent.To sanitize mobile items such as drinking glasses and eating utensils, immerse in a200 ppm active quaternary solution for at least 60 seconds making sure to immersecompletely. Remove and let air dry. Prepare a fresh solution daily or morefrequently as soil is apparent.When used for sanitization of previously cleaned food equipment or food contactitems, limit the active quaternary to 200 ppm. NO POTABLE WATER RINSE ISREQUIRED. DQ-10 10% Solution is an effective sanitizer when diluted in waterup to 750 ppm hardnes (CaCO3).To sanitize pre-cleaned food grade eggs, spray with a solution of 1 ounce DQ-1010% Solution per 4 gallons of of warm water (200 ppm active quaternary solution).The solution should be warmer than the eggs, but not to exceed 130° F. Wet eggsthoroughly and allow to drain. Eggs sanitized with this product shall be subject toPOTABLE WATER RINSE ONLY IF THEY ARE BROKEN IMMEDIATELYfor use in the manufacture of egg products. Eggs should be dry before casing orbreaking. The solution should not be reused for sanitizing eggs.

DQ-1010% Solution

DISINFECTANT SANITIZERDEODORIZER VIRUCIDE

ACTIVE INGREDIENTS n-Alkyl (60% C14 , 30% C16, 5% C12, 5% C18) dimethyl benzyl ammonium chlorides ………………………………….5.0%

n-Alkyl (68% C12, 32% C14 ) dimethyl ethylbenzyl ammonium chlorides ………………………………….5.0%INERT INGREDIENTS …………………………….. 90.0% Total 100.00%

EPA REG. NO. 1839-86-50569EPA EST. NO. 50569-UT-0001


DANGERSee side panels for additional precautionary statements

NET CONTENTS

MANUFACTURED BY:LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, UT 84054(801) 295-5022 Outside of Salt Lake City (800) 366-5022

DEODORIZATION – To deodorize, apply DQ-10 10% solution asindicated under the heading GENERAL DISINFECTION.MILDEWSTAT- To control mold and mildew on pre-cleaned, hard,non-porous surfaces add 3 ounces of DQ-10 10% Solution per gallonof water. Apply solution with a cloth, mop or sponge making sure towet all surfaces completely. Let air dry. Prepare a fresh solution foreach use. Repeat application at weekly intervals or when mildewgrowth appears.

EFFICACY TESTS HAVE DEMONSTRATED THAT DQ-10 10% SOLUTION IS AN EFFECTIVE BACTERICIDEAND VIRUCIDE IN THE PRESENCE OF ORGANIC SOIL(5% BLOOD SERUM)

PRECAUTIONARY STATEMENTSHAZARD TO HUMANS AND DOMESTIC ANIMALS.

DANGER

KEEP OUT REACH OF CHILDREN. CORROSIVE.Causes severe eye and skin damage. Do not get in eyes, onskin or on clothing. Wear goggles or face shield and rubbergloves when handling. Harmful or fatal if swallowed. Avoidcontamination of food. Remove and wash contaminatedclothing.

STATEMENT OF PRACTICAL TREATMENT

In case of contact immediately flush eyes or skin with plenty ofwater for at least 15 minutes. For eyes , call a physician. Removeand wash contaminated clothing before reuse. If swallowed, drinkegg whites, gelatin solution or if these are not available, drink largequantities of water. Call a physician immediately.

NOTE TO PHYSICIAN

Probable mucosal damage may contraindicate the use of gastriclavage.

STORAGE AND DISPOSAL

DO NOT CONTANIMATE WATER, FOOD, OR FEED BY STORAGE ORDISPOSAL.

STORAGE – Store in a dry place no lower in temperature than 50°F or higherthan 120°F.

CONTAINER DISPOSAL – Do not reuse empty container. Triple rinse emptycontainer with water. Return metal drum then offer for reconditioning orpuncture and dispose of in a sanitary landfill, or by other procedures approvedby State and local authorities. Plastic containers may be disposed of in asanitary landfill, incinerated, or if allowed by local authorities, by burning. Ifburned stay out of smoke.

PESTICIDE DISPOSAL – Pesticide wastes are acutely hazardous. Improperdisposal of excess pesticides, spray mixture, or rinsate is a violation of FederalLaw. If these wastes cannot be disposed of by use according to labelinstructions contact your State Pesticide or Environmental Control Agency, orthe Hazardous Waste representative at the nearest EPA Regional Office forguidance.

137

137

CLEANER - DETERGENT - DEODORIZER, SANITIZER – NO FREE ALKALI MILDEWSTAT - DISINFECTANT – FUNGICIDE – With FRAGRANCE

CONQUER has been designed to provide effective cleaning, deodorizing, and disinfectionspecifically for hospitals, nursing homes, households, schools, food processing plants, food serviceestablishments and other institutions where housekeeping is of prime importance in controlling thehazard of cross contamination. CONQUER when used as directed, is formulated to disinfectinanimate hard surfaces such as walls, waxed floors, sink tops, toilet bowls, tables, chairs,telephones, and bed frames. For larger areas such as operating rooms, patient care facilities andrestrooms, this product is designed to provide both heavy duty cleaning and disinfection. Whenused as directed, CONQUER will remove most household dirt in a single application. CONQUERdeodorizes those areas which generally are hard to keep fresh smelling, such as garbage storageareas, empty garbage bins and cans, toilet bowls and other areas which are prone to odors causedby microorganisms. Fragrances available: Floral, Neutral Fresh, Lemon, Pine, Mint, and Bouquet.

DISINFECTION - To disinfect hard inanimate surfaces apply solution with a mop, cloth,sponge or mechanical sprayer so as to wet all surfaces thoroughly. Allow to remain wet for 10minutes and then let air dry.GENERAL DISINFECTION - Add 1/2 ounce CONQUER per gallon of water.

HOSPITAL DISINFECTION - Add 1/2 ounce CONQUER per gallon of water. For heavily soiledareas, a pre-cleaning step in required. Prepare a fresh solution for each use.

To disinfect toilet bowls, flush toilet, add 1/2 ounce CONQUER directly to the bowl water. Swabthe bowl completely using a scrub brush or toilet mop, making sure to get under the rim. Let standfor 10 minutes and flush.

MANUFACTURED BY: LYN DISTRIBUTING 965 No. Redwood Road North Salt Lake, Utah 84054Phone 295-5022 Outside Salt Lake Lake City Area 800-366-5022

CLEANER •• DETERGENT•• DEODORIZER •• SANITIZER ••

MILDEWSTAT •• DISINFECTANT•• FUNGICIDE •• With

FRAGRANCE ••NO FREE ALKALI

138

138

PPrroodduucctt BBuulllleettiinn

LIQUICHLOR 12.5% For Institutional and Industrial Uses. Do Not Store In or About Dwellings. ACTIVE INGREDIENT:

Sodium hypochlorite 12.5% INERT INGREDIENT: 87.5% TOTAL 100% KEEP OUT OF REACH OF CHILDREN, IRRESPONSIBLE PERSONS, AND PETS

DANGER STATEMENT OF PRACTICAL TREATMENT (FIRST AID)

If Contact With Eyes Occur: Flush with water for at least 15 minutes. Get prompt medical attention. If Contact With Skin Occurs: Wash with plenty of soap and water. If Swallowed: Drink large amounts of water. DO NOT induce vomiting. Call a physician or poison control center immediately.

Distributed by (Label #) LIQUICHLOR #12.5% Lyn Distributing EPA Reg. No. 550-20001 a Royal Vopak company (rev. 6-00 6100 Carillon Point, Kirkland, WA 98033 (425) 889-3400

PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS

DANGER: Corrosive, may cause severe skin and eye irritation or chemical burns to broken skin. Causes eye damage. Wear safety glasses or goggles and rubber gloves when handling this product. Wash after handling. Avoid breathing vapors. Vacate poorly ventilated areas as soon as possible. Do not return until strong odors have dissipated. ENVIRONMENTAL HAZARDS: This pesticide is toxic to fish and aquatic organisms. Do not discharge effluent containing this product into lakes, streams, ponds, estuaries, oceans or other waters unless in accordance with the requirements of a National Pollutant Discharge Elimination System (NPDES) permit and the permitting authority has been notified in writing prior to discharge. Do not discharge effluent containing this product to sewer systems without previously notifying the local sewage treatment plant authority. For guidance contact your State Water Board or Regional Office of the EPA.

PHYSICAL OR CHEMICAL HAZARDS STRONG OXIDIZING AGENT: Mix only with water according to label directions. Mixing this product with chemicals (e.g. ammonia, acids, detergents, etc.) or organic matter (e.g. urine feces, etc.) will release chlorine gas, which is irritating to eyes, lungs and mucous membranes.

DIRECTIONS FOR USE

It is a violation of federal law to use this product in a manner inconsistent with its labeling.

NOTE: This product degrades with age. Use a chlorine test kit and increase dosage, as necessary, to obtain the required level of available chlorine.

STORAGE AND DISPOSAL Store this product in a cool dry area, away from direct sunlight and heat to avoid deterioration. In case of spill, flood areas with large quantities of water. Product or rinsates that cannot be used should be diluted with water before disposal in a sanitary sewer. Do not reuse container but place in trash collection. Do not contaminate food or feed by storage, disposal or cleaning of equipment.

139

139

SWIMMING POOL WATER DISINFECTION For a new pool or spring start-up, superchlorinate with 52 to 104 fl. oz. of this product per 10,000 gallons of water to yield 5 to 10 ppm available chlorine by weight. Check the level of available chlorine with a test kit. Adjust and maintain pool water pH to between 7.2 and 7.6. Adjust and maintain the alkalinity of the pool to between 50 and 100 ppm. To maintain the pool, add manually or by a feeder device 11 fl. oz. of this product per 10,000 gallons of water to yield an available chlorine residual between 0.6 and 1.0 ppm. by weight. Stabilized pools should maintain a residual of 1.0 to 1.5 ppm available chlorine. Test the pH, available chlorine residual and alkalinity of the water frequently with appropriate test kits. Frequency of water treatment will depend upon temperature and number of swimmers. Every 7 days, or as necessary, superchlorinate the pool with 52 to 104 fl. oz. of this product per 10,000 gallons of water to yield 5 to 10 ppm available chlorine by weight. Check the level of available chlorine with a test kit. Do not re-enter pool until the chlorine residual is between 1.0 and 3.0 ppm. At the end of the swimming pool season or when water is to be drained from the pool, chlorine must be allowed to dissipate from treated pool water before discharge. Do not chlorinate the pool within 24 hours prior to discharge. WINTERIZING POOLS: While water is still clear and clean, apply 3 fl. oz. of this product per 1,000 gallons of water while filter is running to obtain a 3 ppm available chlorine residual, as determined by a suitable test kit. Cover pool, prepare heater, filter and heater components for winter by following manufacturer’s instructions. SPAS, HOT TUBS, IMMERSION TANKS, ETC. SPAS/HOT TUBS: Apply 5 fl. oz. of this product per 1,000 gallons of water to obtain a free available chlorine concentration of 5 ppm, as determined by a suitable chlorine test kit. Adjust and maintain pool water pH to between 7.2 and 7.8. Some oils, lotions, fragrances, cleaners, etc., may cause foaming or cloudy water as well as reduce the efficiency of the product. To maintain the water, apply 5 fl. oz. of this product per 1,000 gallons of water over the surface to maintain a chlorine concentration of 5 ppm. After each use, shock treat with 16 fl. oz. of this product per 1,000 gallons of water to control odor and algae. During extended periods of disuse, add 3 fl. oz. of this product daily per 1,000 gallons of water to maintain a 3 ppm chlorine concentration. HUBBARD AND IMMERSION TANKS: Add 5 fl. oz. of product per 200 gallons of water before patient used to obtain a chlorine residual of 25 ppm, as determined by a suitable test kit. Adjust and maintain water pH to between 7.2 and 7.6. After each use drain the tank. Add 5 fl. oz. of this product to a bucket of water and circulate this solution through the agitator of the tank for 15 minutes and then rinse out the solution. Clean tank thoroughly and dry with clean cloths. HYDROTHERAPY TANKS: Add 1 fl. oz. of this product per 1,000 gallons of water to obtain a chlorine residual of 1 ppm, as determined by a suitable chlorine test kit. Pool should not be entered until the chlorine residual is below 3 ppm. Adjust and maintain the water pH to between 7.2 and 7.6. Operate pool filter continuously. Drain pool weekly, and clean before refilling. SANITATION OF NONPOROUS FOOD CONTACT SURFACES RINSE METHOD: A solution of 100 ppm available chlorine may be used in the sanitizing solution if a chlorine test kit is available. Solutions containing an initial concentration of 100 ppm available chlorine must be tested and adjusted periodically to insure that the available chlorine does not drop below 50 ppm. Prepare a 100 ppm sanitizing solution by thoroughly mixing 1 fl. oz. of this product per 10 gallons of water. If no test kit is available, prepare a sanitizing solution by thoroughly mixing 2 fl. oz. of this product per 10 gallons of water to provide approximately 200 ppm available chlorine by weight. Clean equipment surfaces in the normal manner. Prior to use, rinse all surfaces thoroughly with the sanitizing solution, maintaining contact with the sanitizer for at least 2 minutes. If solution contains less than 50 ppm available

140

140

chlorine, as determined by a suitable test kit, either discard the solution or add sufficient product to re-establish a 200 ppm residual. Do not rinse equipment with water after treatment and do not soak equipment overnight. Sanitizers used in automated systems may be used for general cleaning but may not be re-used for sanitizing purposes. IMMERSION METHOD: A solution of 100 ppm available chlorine may be used in the sanitizing solution if a chlorine test kit is available. Solutions containing an initial concentration of 100 ppm available chlorine must be tested and adjusted periodically to insure that the available chlorine does not drop below 50 ppm. Prepare a 100 ppm sanitizing solution by thoroughly mixing 1 fl. oz. of this product per 10 gallons of water. If no test kit is available, prepare a sanitizing solution by thoroughly mixing 2 fl. oz. of this product per 10 gallons of water to provide approximately 200 ppm available chlorine by weight. Clean equipment in the normal manner. Prior to use, immerse equipment in the sanitizing solution for at least 2 minutes and allow the sanitizer to drain. If solution contains less than 50 ppm available chlorine, as determined by a suitable test kit, either discard the solution or add sufficient product to re-establish a 200 ppm residual. Do not rinse equipment with water after treatment. Sanitizers used in automated systems may be used for general cleaning but may not be re-used for sanitizing purposes. FLOW/PRESSURE METHOD: Disassemble equipment and thoroughly clean after use. Assemble equipment in operating position prior to use. Prepare a volume of 200 ppm available chlorine sanitizing solution equal to 110% of volume capacity of the equipment by mixing this product in a ratio of 2 fl. oz. per 10 gallons of water. Pump solution through the system until full flow is obtained at all extremities, the system is completely filled with the sanitizer and all air is removed from the system. Close drain valves and hold under pressure for at least 2 minutes to insure contact with all internal surfaces. Remove some cleaning solution from drain valve and test with a chlorine test kit. Repeat entire cleaning/sanitizing process if effluent contains less than 50 ppm available chlorine. CLEAN-IN-PLACE METHOD: Thoroughly clean equipment after use. Prepare a volume of a 200 ppm available chlorine sanitizing solution equal to 110% of volume capacity of the equipment by mixing this product in a ratio of 2 fl. oz. per 10 gallons of water. Pump solution through system until full flow is obtained at all extremities, the system is completely filled with the sanitizer and all air is removed from the system. Close drain valves and hold under pressure for at least 10 minutes to insure contact with all internal surfaces. Remove some cleaning solution from drain valve and test with a chlorine test kit. Repeat entire cleaning/sanitizing process if effluent contains less than 50 ppm available chlorine. SPRAY/FOG METHOD: Preclean all surfaces after use. Use a 200 ppm available chlorine solution to control bacteria, mold or fungi and a 600 ppm solution to control bacteriophage. Prepare a 200 ppm sanitizing solution of sufficient size by thoroughly mixing this product in a ratio of 2 fl. oz. per 10 gallons of water. Prepare a 600 ppm solution by thoroughly mixing this product in a ratio of 6 fl .oz. per 10 gallons of water. Use spray or fogging equipment which can resist hypochlorite solutions. Always empty and rinse spray/fog equipment with potable water after use. Thoroughly spray or fog all surfaces until wet, allowing excess sanitizer to drain. Vacate area for at least 2 hours. Prior to using equipment, rinse all surfaces treated with a 600 ppm solution with a 200 ppm available chlorine solution. SANITIZATION OF POROUS FOOD CONTACT SURFACES RINSE METHOD: Prepare a 600 ppm solution by thoroughly mixing 6 fl. oz. of this product with 10 gallons of water. Clean surfaces in the normal manner. Rinse all surfaces thoroughly with the 600 ppm solution, maintaining contact for at least 2 minutes. Prepare a 200 ppm sanitizing solution by thoroughly mixing 2 fl. oz. of this product with 10 gallons of water. Prior to using equipment, rinse all surfaces with the 200 ppm available chlorine solution. Do not rinse and do not soak equipment overnight. IMMERSION METHOD: Prepare a 600 ppm solution by thoroughly mixing in an immersion tank 6 fl. oz. of this product with 10 gallons of water. Clean equipment in the normal manner. Immerse equipment in the 600 ppm solution for at

141

141

least 2 minutes. Prepare a 200 ppm sanitizing solution by thoroughly mixing 2 fl. oz. of this product with 10 gallons of water. Prior to using equipment, immerse all surfaces in a 200 ppm available chlorine solution. Do not rinse or soak equipment overnight. SPRAY/FOG METHOD: Preclean all surfaces after use. Prepare a 600 ppm available chlorine sanitizing solution of sufficient size by thoroughly mixing this product in a ratio of 6 fl. oz. per 10 gallons of water. Use spray or fogging equipment which can resist hypochlorite solutions. Always empty and rinse spray/fog equipment with potable water after use. Thoroughly spray or fog all surfaces until wet, allowing excess sanitizer to drain. Vacate area for at least 2 hours. Prior to using equipment, rinse all surfaces with a 200 ppm available chlorine solution. Prepare a 200 ppm sanitizing solution by thoroughly mixing 2 fl. oz. of this product with 10 gallons of water. SANITIZATION OF NONPOROUS NON-FOOD CONTACT SURFACES RINSE METHOD: Prepare a sanitizing solution by thoroughly mixing 2 fl. oz. of this product with 10 gallons of water to provide approximately 200 ppm available chlorine by weight. Clean equipment surfaces in the normal manner. Prior to use, rinse all surfaces thoroughly with the sanitizing solution, maintaining contact with the sanitizer for at least 2 minutes. Do not rinse equipment with water after treatment and do not soak equipment overnight. IMMERSION METHOD: Prepare a sanitizing solution by thoroughly mixing, in an immersion tank, 2 fl. oz. of this product with 10 gallons of water to provide approximately 200 ppm available chlorine by weight. Clean equipment in the normal manner. Prior to use, immerse equipment in the sanitizing solution for at least 2 minutes and allow the sanitizer to drain. Do not rinse equipment with water after treatment. SPRAY/FOG METHOD: Preclean all surfaces after use. Prepare a 200 ppm available chlorine sanitizing solution of sufficient size by thoroughly mixing this product in a ratio of 2 fl. oz. per 10 gallons of water. Use spray or fogging equipment which can resist hypochlorite solutions. Prior to using equipment, thoroughly spray or fog all surfaces until wet, allowing excess sanitizer to drain. Vacate area for at least 2 hours. DISINFECTION OF NONPOROUS NON-FOOD CONTACT SURFACES RINSE METHOD: Prepare a disinfection solution by thoroughly mixing 6 fl. oz. of this product with 10 gallons of water to provide approximately 600 ppm available chlorine by weight. Clean equipment surfaces in the normal manner. Prior to use, rinse all surfaces thoroughly with the disinfecting solution, maintaining contact with the solution for at least 10 minutes. Do not rinse equipment with water after treatment and do not soak equipment overnight. IMMERSION METHOD: Prepare a disinfecting solution by thoroughly mixing, in an immersion tank, 6 fl. oz. of this product with 10 gallons of water to provide approximately 600 ppm available chlorine by weight. Clean equipment in normal manner. Prior to use, immerse equipment in the disinfecting solution for at least 10 minutes and allow the sanitizer to drain. Do not rinse equipment with water after treatment. SANITIZATION OF POROUS NON-FOOD CONTACT SURFACES RINSE METHOD: Prepare a sanitizing solution by thoroughly mixing, in an immersion tank, 6 fl. oz. of this product with 10 gallons of water to provide approximately 600 ppm available chlorine by weight. Clean surfaces in the normal manner. Prior to use, rinse all surfaces thoroughly with the sanitizing solution, maintaining contact with the sanitizer for at least 2 minutes. Do not rinse with water after treatment and do not soak equipment overnight. IMMERSION METHOD: Prepare a sanitizing solution by thoroughly mixing 6 fl. oz. of this product with 10 gallons of water to provide approximately 600 ppm available chlorine by weight. Clean equipment in the normal manner. Prior to use, immerse equipment in the sanitizing solution for at least 2 minutes and allow the sanitizer to drain. Do not rinse equipment with water after treatment. SPRAY/FOG METHOD: After cleaning, sanitize non-food contact surfaces with a 600 ppm available chlorine sanitizing solution of sufficient size by thoroughly mixing this product in a ratio of 6 fl. oz. per 10 gallons of water. Use spray or fogging equipment which can resist hypochlorite solutions. Always empty and

142

142

rinse spray/fog equipment with potable water after use. Prior to using equipment, thoroughly spray or fog all surfaces until wet, allowing excess sanitizer to drain. Vacate area for at least 2 hours. SEWAGE & WASTEWATER EFFLUENT TREATMENT The disinfection of sewage must be evaluated by determining that the total number of coliform bacterial and/or fecal coliform bacteria, as determined by the Most Probable Number (MPN) procedure, of the chlorinated effluent has been reduced to or below the maximum permitted by the controlling regulatory jurisdiction. On the average, satisfactory disinfection of secondary wastewater effluent can be obtained when the chlorine residual is 0.5 ppm after 15 minutes contact. Although the chlorine residual is the critical factor in disinfection, the importance of correlating chlorine residual with bacterial kill must be emphasized. The MPN of the effluent, which is directly related to the water quality standards requirements, should be the final and primary standard and the chlorine residual should be considered an operating standard valid only to the extent verified by the coliform quality of the effluent. The following are critical factors affecting wastewater disinfection. 1. Mixing: It is imperative that the product and the wastewater be instantaneously and completely flash mixed to assure reaction with every chemically active soluble and particulate component of the wastewater. 2. Contacting: Upon flash mixing, the flow through the system must be maintained. 3. Dosage/Residual Control: Successful disinfection is extremely dependent on response to fluctuating chlorine demand to maintain a predetermined, desirable chlorine level. Secondary effluent should contain 0.2 to 1.0 ppm chlorine residual after a 15 to 30 minute contact time. A reasonable average of residual chlorine is about 0.5 ppm after 15 minutes of contact time. SEWAGE & WASTEWATER TREATMENT EFFLUENT SLIME CONTROL: Apply a 100 to 1,000 ppm available chlorine solution at a location which will allow complete mixing. Prepare this solution by mixing 10 to 100 fl. oz. of this product per 100 gallons of water. Once control is evident, apply a 15 ppm available chlorine solution. Prepare this solution by mixing 3 fl. oz. of this product per 100 gallons of water. FILTER BEDS: SLIME CONTROL: Remove filter from service, drain to a depth of 1 foot above filter sand, and add 80 fl. oz. of this product per 20 sq. ft. evenly over the surface. Wait 30 minutes before draining water to a level that is even with the top of the filter. Wait 4 to 6 hours before completely draining and backwashing filter. DISINFECTION OF DRINKING WATER (EMERGENCY/PUBLIC/INDIVIDUAL SYSTEMS) PUBLIC SYSTEMS: Mix a ratio of 1 fl. oz. of this product per 100 gallons of water. Begin feeding this solution with a hypochlorinator until a free available chlorine residual of at least 0.2 ppm and no more than 0.6 ppm is attained throughout the distribution system. Check water frequently with a chlorine test kit. Bacteriological sampling must be conducted at a frequency not less than prescribed by the National Interim Primary Drinking Water Regulations. Contact your local Health Department for further details. INDIVIDUAL SYSTEMS: DUG WELLS: Upon completion of the casing (Lining) wash the interior of the casing (lining) with a 100 ppm available chlorine solution using a stiff brush. This solution can be made by thoroughly mixing 1 fl. oz. of this product into 10 gallons of water. After covering the well, pour the sanitizing solution into the well through both the pipesleeve opening and the pipeline. Wash the exterior of the pump cylinder also with the sanitizing solution. Start pump and pump water until strong odor of chlorine in water is noted. Stop pump and wait at least 24 hours. After 24 hours flush well until all traces of chlorine have been removed from the water. Consult your local Health Department for further details. INDIVIDUAL WATER SYSTEMS: DRILLED, DRIVEN, & BORED WELLS: Run pump until water is as free from turbidity as possible. Pour a 100 ppm available chlorine sanitizing solution into the well. This solution can be made by thoroughly

143

143

mixing 1 fl. oz. of this product into 10 gallons of water. Add 5 to 10 gallons of clean, chlorinated water to the well in order to force the sanitizer into the rock formation. Wash the exterior of pump cylinder with the sanitizer. Drop pipeline into well, start pump and pump water until strong odor of chlorine in water is noted. Stop pump and wait at least 24 hours. After 24 hours flush well until all traces of chlorine have been removed from the water. Deep wells with high water levels may necessitate the use of special methods for introduction of the sanitizer into the well. Consult your local Health Department for further details. INDIVIDUAL WATER SYSTEMS: FLOWING ARTESIAN WELLS: Artesian wells generally do not require disinfection. If analyses indicate persistent contamination, the well should be disinfected. Consult your local Health Department for further details. EMERGENCY DISINFECTION: When boiling of water for 1 minutes is not practical, water can be made potable by using this product. Prior to addition of the sanitizer, remove all suspended material by filtration or by allowing it to settle to the bottom. Decant the clarified, contaminated water to a clean container and add 8 drops of this product to 20 gallons of water. Allow the treated water to stand for 30 minutes. Properly treated water should have a slight chlorine odor, if not, repeat dosage and allow the water to stand an additional 15 minutes. The treated water can then be made palatable by pouring it between clean containers several times. PUBLIC WATER SYSTEMS RESERVOIRS: ALGAE CONTROL: Hypochlorinated streams feeding the reservoir. Suitable feeding points should be selected on each stream at least 50 yards upstream from the points of entry into the reservoir. MAINS: Thoroughly flush section to be sanitized by discharging from hydrants. Permit a water flow of at least 2.5 feet per minute to continue under pressure while injecting this product by means of a hypochlorinator. Stop water flow when chlorine residual test of 50 ppm is obtained at the low pressure end of the new main section after a 24 hour retention time. When chlorination is complete, the system must be flushed free of all heavily chlorinated water. NEW TANKS, BASINS, ETC.: Remove all physical soil from surfaces. Place 20 fl. oz. of this product per each 5 cubic feet of working capacity (500 ppm available chlorine). Fill to working capacity and allow to stand for at least 4 hours. Drain and flush with potable water and return to surface. NEW FILTER SAND: Apply 80 fl. oz. of this product per each 150 to 200 cubic feet of sand. The action of the product dissolving as the water passes through the bed will aid in sanitizing the new sand. NEW WELLS: Flush the casing with a 50 ppm available chlorine solution of water containing 5 fl. oz. of this product for each 100 gallons of water. The solution should be pumped or fed by gravity into the well after thorough mixing with agitation. The well should stand for several hours or overnight under chlorination. It may then be pumped until a representative raw water sample is obtained. Bacterial examination of the water will indicate whether further treatment is necessary. EXISTING EQUIPMENT: Remove equipment from service, thoroughly clean surfaces of all physical soil. Sanitize by placing 21 fl. oz. of this product per each 5 cubic feet capacity (approximately 500 ppm available chlorine). Fill to working capacity and let stand at least 4 hours. Drain and place in service. If the previous treatment is not practical, surfaces may be sprayed with a solution containing 5 fl .oz. of this product for each 5 gallons of water (approximately 1,000 available chlorine). After drying, flush with water and return to service. EMERGENCY DISINFECTION AFTER FLOODS WELLS: Thoroughly flush contaminated casing with a 500 ppm available chlorine solution. Prepare this solution by mixing 5 fl. oz. of this product with 10 gallons of water. Backwash the well to increase yield and reduce turbidity, adding sufficient chlorinating solution to the backwash to produce a 10 ppm available chlorine residual, as determined by a chlorine test kit. After the turbidity has been reduced and the casing has been treated, add sufficient chlorinating solution to produce a 50 ppm available chlorine residual. Agitate

144

144

the well water for several hours and take a representative water sample. Retreat well if water samples are biologically unacceptable. RESERVOIRS: In case of contamination by overflowing streams, establish hypochlorinating stations upstream of the reservoir. Chlorinate the inlet water until the entire reservoir obtains a 0.2 ppm available chlorine residual, as determined by a suitable chlorine test kit. In case of contamination from surface drainage, apply sufficient product directly to the reservoir to obtain a 0.2 ppm available chlorine residual in all parts of the reservoir. BASINS, TANKS, FLUMES, ETC.: Thoroughly clean all equipment, then apply 20 fl. oz. of this product per 5 cu. ft. of water to obtain a 500 ppm available chlorine, as determined by a suitable test kit. After 24 hours drain, flush, and return to service. If the previous method is not suitable, spray or flush the equipment with a solution containing 5 fl. oz. of this product for each 5 gallons of water (1,000 ppm available chlorine). Allow to stand for 2 to 4 hours, flush and return to service. FILTERS: When the sand filter needs replacement, apply 80 fl. oz. of this product for each 150 to 200 cubic feet of sand. When the filter is severely contaminated, additional product should be distributed over the surface at the rate of 80 fl. oz. per each 20 sq. ft. of sand. Water should stand at a depth of 1 foot above the surface of the filter bed for 4 to 24 hours. When the filter beds can be backwashed of mud and silt, apply 80 fl. oz. of this product per each 50 sq. ft., allowing water to stand at a depth of 1 foot above the filter sand. After 30 minutes, drain water to the level of the filter. After 4 to 6 hours drain, and proceed with normal backwashing. DISTRIBUTION SYSTEM: Flush repaired or replaced section with water. Establish a hypochlorinating station and apply sufficient product until a consistent available chlorine residual of at least 10 ppm remains after a 24 hour retention time. Use a chlorine test kit. EMERGENCY DISINFECTION AFTER FIRES CROSS CONNECTIONS OR EMERGENCY CONNECTIONS: Hypochlorination or gravity feed equipment should be set up near the intake of the untreated water supply. Apply sufficient product to give a chlorine residual of at least 0.1 to 0.2 ppm at the point where the untreated supply enters the regular distribution system. Use a chlorine test kit. EMERGENCY DISINFECTION AFTER DROUGHTS SUPPLEMENTARY WATER SUPPLIES: Gravity or mechanical hypochlorite feeder should be set up on a supplementary line to dose the water to a minimum chlorine residual of 0.2 ppm after a 20 minute contact time. Use a chlorine test kit. WATER SHIPPED IN BY TANKS, TANK CARS, TRUCKS, ETC.: Thoroughly clean all containers and equipment. Spray a 500 ppm available chlorine solution and rinse with potable water after 5 minutes. This solution is made by mixing 5 fl. oz. of this product for each 10 gallons of water. During the filling of the containers, dose with sufficient amounts of this product to provide at least a 0.2 ppm chlorine residual. Use a chlorine test kit. EMERGENCY DISINFECTION AFTER MAIN BREAKS MAINS: Before assembly of the repaired section, flush out mud and soil. Permit a water flow of at least 2.5 feet per minute to continue under pressure while injecting this product by means of a hypochlorinator. Stop water flow when a chlorine residual test of 50 ppm is obtained at the low pressure end of the new main section after a 24 hour retention time. When chlorination is completed, the system must be flushed free of all heavily chlorinated water. COOLING TOWER/EVAPORATIVE CONDENSER WATER SLUG FEED METHOD: Initial Dose: When system is noticeably fouled, apply 52 to 104 fl. oz. per 10,000 gallons of water in the system to obtain from 5 to 10 ppm available chlorine. Repeat until control is achieved. Subsequent Dose: When microbial control is evident, add 11 fl. oz. of this product per 10,000 gallons of water in the system daily, or as needed to maintain control and keep the chlorine residual at 1 ppm. Badly fouled systems must be cleaned before treatment is begun. INTERMITTENT FEED METHOD: Initial Dose: When system is noticeably fouled, apply 52 to 104 fl. oz. of this product per 10,000 gallons of water in the system to

145

145

obtain 5 to 10 ppm available chlorine. Apply half (or 1/3, 1/4, or 1/5) of this initial dose when half (or 1/3, 1/4, or 1/5) of the water in the system has been lost by blowdown. Subsequent Dose: When microbial control is evident, add 11 fl. oz. of this product per 10,000 gallons of water in the system daily, or as needed to maintain control and keep the chlorine residual at 1 ppm. Apply half (or 1/3, 1/4, or 1/5) of this initial dose when half (or 1/3, 1/4, or 1/5) of the water in the system had been lost by blowdown. Badly fouled systems must be cleaned before treatment is begun. CONTINUOUS FEED METHOD: Initial Dose: When system is noticeably fouled, apply 52 to 104 fl. oz. of this product per 10,000 gallons of water to obtain 5 to 10 ppm available chlorine. Subsequent Dose: Maintain this treatment level by starting a continuous feed of 1 fl. oz. per 1,000 gallons of water lost by blowdown to maintain a 1 ppm residual. Badly fouled systems must be cleaned before treatment is begun. LAUNDRY SANITIZERS Household Laundry Sanitizers IN SOAKING SUDS: Thoroughly mix 2 fl. oz. of this product per 10 gallons of wash water to provide 200 ppm available chlorine. Wait 5 minutes, then add soap or detergent. Immerse laundry for at least 11 minutes prior to starting the wash/rinse cycle. IN WASHING SUDS: Thoroughly mix 2 fl. oz. of this product per 10 gallons of wash containing clothes to provide 200 ppm available chlorine. Wait 5 minutes, then add soap or detergent and start the wash/rinse cycle. COMMERCIAL LAUNDRY SANITIZERS Wet fabrics or clothes should be spun dry prior to sanitization. Thoroughly mix 2 fl. oz. of this product to 10 gallons of water to yield 200 ppm available chlorine. Promptly after mixing the sanitizer, add the solution into the prewash prior to washing fabrics/clothes in the regular wash cycle with a good detergent. Test the level of available chlorine, if solution has been allowed to stand. Add more of this product if the available chlorine level has dropped below 200 ppm. FARM PREMISES Remove all animals, poultry, and feed from premises, conveyances, and enclosures. Remove all litter and manure from floors, walls and surfaces of barns, pens, stalls, chutes, and other facilities occupied or traversed by animals or poultry. Empty all troughs, racks and other feeding and watering appliances. Thoroughly clean all surfaces with soap or detergent and rinse with water. To disinfect, saturate all surfaces with a solution of at least 1,000 ppm available chlorine for a period of 10 minutes. A 1,000 ppm solution can be made by thoroughly mixing 11 fl. oz. of this product per 10 gallons of water. Immerse all halters, ropes, and other types of equipment used in handling and restraining animals and poultry, as well as the cleaned forks, shovels and scrapers used for removing litter and manure. Ventilate buildings, conveyances, boats and other closed spaces. Do not house livestock or poultry or employ equipment until chlorine has been dissipated. All treated feed racks, mangers, troughs, automatic feeders, fountains and waterers must be rinsed with potable water before reuse. PULP AND PAPER MILL PROCESS WATER SYSTEMS SLUG FEED METHOD: Initial Dose: When system is noticeably fouled, apply 52 to 104 fl. oz. of this product per 10,000 gallons of water in the system to obtain from 5 to 10 ppm available chlorine. Repeat until control is achieved. Subsequent Dose: When microbial control is evident, add 11 fl. oz. of this product per 10,000 gallons in the system daily, or as needed to maintain control and keep the chlorine residual at 1 ppm. Badly fouled systems must be cleaned before treatment is begun. INTERMITTENT FEED METHOD: Initial Dose: When system is noticeably fouled, apply 52 to 104 fl. oz. of this product per 10,000 gallons of water in the system to obtain 5 to 10 ppm available chlorine. Apply half (or 1/3, 1/4, or 1/5) of this initial dose when half (or 1/3, 1/4, or 1/5) of the water in the system has been

146

146

lost by blowdown. Badly fouled systems must be cleaned before treatment is begun. Subsequent Dose: When microbial control is evident, add 11 fl. oz. of this product per 10,000 gallons in the system daily, or as needed to maintain control and keep the chlorine residual at 1 ppm. Apply half (or 1/3, 1/4, or 1/5) of the initial dose when half (or 1/3, 1/4, or 1/5) of the water in the system has been lost by blowdown. Badly fouled systems must be cleaned before treatment is begun. CONTINUOUS FEED METHOD: Initial Dose: When system is noticeably fouled, apply 52 to 104 fl. oz. of this product per 10,000 gallons of water in the system to obtain 5 to 10 ppm available chlorine. Subsequent Dose: Maintain this treatment level by starting a continuous feed of 1 fl. oz. of this product per 1,000 gallons of water lost by blowdown to maintain a 1 ppm residual. Badly fouled systems must be cleaned before treatment is begun. AGRICULTURAL USES POST-HARVEST PROTECTION: Potatoes can be sanitized after cleaning and prior to storage by spraying with a sanitizing solution at a level of 1 gallon of sanitizing solution per ton of potatoes. Thoroughly mix 1 fl. oz. of this product with 2 gallons of water to obtain a 500 ppm available chlorine. LEAFCUTTING BEE CELLS & BEE BOARDS: Disinfect leaf cutting bee cells and bee boards by immersion in a solution containing 1 ppm available chlorine for 3 minutes. Allow cells to drain for 2 minutes and dry 4 to 5 hours or until no chlorine odor can be detected. This solution is made by thoroughly mixing 1 tsp. of this product per 100 gallons of water. The bee domicile is disinfected by spraying with 0.1 ppm solution until all surfaces are thoroughly wet. Allow the domicile to dry until all chlorine odor has dissipated. FOOD EGG SANITIZATION: Thoroughly clean all eggs. Thoroughly mix 2 fl. oz. of this product per 10 gallons of warm water to produce a 200 ppm available chlorine solution. The sanitized temperature should not exceed 130 F. Spray the warm sanitizer so that the eggs are thoroughly wetted. Allow the eggs to thoroughly dry before casing or breaking. Do not apply a potable water rinse. The solution should not be re-used to sanitize eggs. FRUIT AND VEGETABLE WASHING: Thoroughly clean all fruits and vegetables in a wash tank. Thoroughly mix 5 fl. oz. of this product in 100 gallons of water to make a sanitizing solution of 25 ppm available chlorine. After draining the tank, submerge fruit or vegetables for 2 minutes in a second wash tank containing the recirculating sanitizing solution. Spray rinse vegetables with the sanitizing solution prior to packaging. Rinse fruit with potable water only prior to packaging. AQUACULTURAL USES FISH PONDS: Remove fish from ponds prior to treatment. Thoroughly mix 103 fl. oz. of this product with 10,000 gallons of water to obtain 10 ppm available chlorine. Add more product to the water if the available chlorine level is below 1 ppm after 5 minutes. Return fish to pond after the available chlorine level reaches zero. FISH POND EQUIPMENT: Thoroughly clean all equipment prior to treatment. Thoroughly mix 2 fl. oz. of this product with 10 gallons of water to obtain a 200 ppm available chlorine. Porous equipment should soak for one hour. MAINE LOBSTER PONDS: Remove lobsters, seaweed, etc. from ponds prior to treatment. Drain the pond. Thoroughly mix 48.5 gallons per 10,000 gallons of water to obtain at least 600 ppm available chlorine. Apply so that all barrows, gates, rock and dam are treated with product. Permit high tide to fill the pond and then close gates. Allow water to stand for 2 to 3 days until the available chlorine level reaches zero. Open gates and allow 2 tidal cycles to flush pond before returning lobsters to pond. CONDITIONING LIVE OYSTERS: Thoroughly mix 5 fl. oz. of this product with 10,000 gallons of water at 50 to 70 F to obtain 0.5 ppm available chlorine. Expose oysters to this solution for at least 15 minutes, monitoring the available chlorine level so that it does not fall below 0.05 ppm. Repeat entire process if the available chlorine level drops below 0.05 ppm or the temperature falls below 50 F.

147

147

CONTROL OF SCAVENGERS IN FISH HATCHERY PONDS: Prepare a solution containing 200 ppm of available chlorine by mixing 2 fl. oz. of this product with 10 gallons of water. Pour into drained pond potholes. Repeat if necessary. Do not put desirable fish back into refilled pond until chlorine residual had dropped to 0 ppm, as determined by a test kit. SANITIZATION OF DIALYSIS MACHINES Flush equipment thoroughly with water prior to using this product. Thoroughly mix 6 fl. oz. of this product to 10 gallons of water to obtain at least 600 ppm available chlorine. Immediately use this product in the hemodialysate system allowing for a minimum contact time of 15 minutes at 20 C. Drain system of the sanitizing solution and thoroughly rinse with water. Discard and DO NOT reuse the spent sanitizer. Rinsate must be monitored with a suitable test kit to insure that no available chlorine remains in the system. This product is recommended for decontaminating single and multipatient hemodialysate systems. This product has been shown to be an effective disinfectant (virucide, fungicide, bacteriocide, pseudomonicide) when tested by AOAC and EPA test methods. This product may not totally eliminate all vegetative microorganisms in hemodialysate delivery systems due to their construction and/or assembly, but can be relied upon to reduce the number of microorganisms to acceptable levels when used as directed. This product should be used in a disinfectant program which includes bacteriological monitoring of the hemodialysate delivery system. This product is NOT recommended for use in hemodialysate or reverse osmosis (RO) membranes. Consult the guidelines for hemodialysate systems which are available from the Hepatitis Laboratories, CDC, Phoenix, AR 85021. ASPHALT OR WOOD ROOFS AND SIDINGS To control fungus and mildew, first remove physical soil by brushing and hosing with clean water, and apply a 5,000 ppm available chlorine solution. Mix 5 fl. oz. of this product per gallon of water and brush or spray roof or siding. After 30 minutes, rinse by hosing with clean water. BOAT BOTTOMS To control slime on boat bottoms, sling a plastic tarp under boat, retaining enough water to cover the fouled bottom area, but not allowing water to enter enclosed area. This envelope should contain approximately 500 gallons of water for a 14 foot boat. Add 18 fl. oz. of this product to this water to obtain a 35 ppm available chlorine concentration. Leave immersed for 8 to 12 hours. Repeat if necessary. Do not discharge the solution until the free chlorine level has dropped to 0 ppm, as determined by a swimming pool test kit. ARTIFICIAL SAND BEACHES To sanitize the sand, spray a 500 ppm available chlorine solution containing 5 fl. oz. of this product per 10 gallons of water at frequent intervals. Small areas can be sprinkled with a watering can.

148

148

CLEANER - DETERGENT - DEODORIZER - MILDEWSTAT - DISINFECTANT - FUNGICIDE - CANINE PARVOCIDAL - With FRAGRANCE

PATROL has been designed to provide effective cleaning, deodorizing, and disinfection specifically for hospitals, nursing homes, households, animal quarters, kennels, schools, parks and recreation areas, food processing plants, food service establishments and other institutions where housekeeping is of prime importance in controlling the hazard of cross contamination. PATROL when used as directed, is formulated to disinfect inanimate hard surfaces such as walls, floors, sink tops, toilet bowls, tables, chairs, telephones, and bed frames. For larger areas such as operating rooms, patient care facilities and restrooms, this product is designed to provide both heavy duty cleaning and disinfection. When used as directed, PATROL will remove most household dirt in a single application. PATROL deodorizes those areas which generally are hard to keep fresh smelling, such as garbage storage areas, empty garbage bins and cans, golf ball washing stations, toilet bowls and other areas which are prone to odors caused by microorganisms. Fragrances available: Floral, Neutral Fresh, Lemon, Pine, Mint, and Bouquet.

DISINFECTION - To disinfect hard inanimate surfaces apply solution with a mop, cloth, sponge or mechanical sprayer so as to wet all surfaces thoroughly. Allow to remain wet for 10 minutes and then let air dry.

GENERAL DISINFECTION - Add 4.5 ounces PATROL per gallon of water. HOSPITAL DISINFECTION - Add 6 ounces PATROL per gallon of water. For heavily

soiled areas, a pre-cleaning step in required. Prepare a fresh solution for each use. To disinfect toilet bowls, flush toilet, add 4.5 ounces PATROL directly to the bowl water. Swab the bowl completely using a scrub brush or toilet mop, making sure to get under the rim. Let stand for 10 minutes and flush.

VIRUCIDAL ACTIVITY - This product, when used on environmental inanimate hard nonporous surfaces at a dilution of 18 ounces per gallon of water exhibits effective virucidal activity against Canine Parvovirus. EPA REG. NO. 1839-101-50569 EPA EST. NO. 50569-UT-1

MANUFACTURED For: LYN DISTRIBUTING 965 No. Redwood Road North Salt Lake, Utah 84054 Phone 295-5022 Outside Salt Lake Lake City Area 800-366-5022 DATE 8/07/98

Works well in out side Rest rooms as cleaner and disinfectant.

Works well on animal quarters and kennels to kill Canine Parvovirus.

149

149

SPRAY FRESH BATHROOM CLEANER

DISINFECTANT DEODORANT

NON - ACID

CLEANER •• MILDEWSTAT •• DEODORIZER •• DISINFECTANT •• TUBERCULOCIDAL ••VIRUCIDE (HIV-1, CANINE PARVOVIRUS, AND POLIOVIRUS TYPE1)

SPRAY FRESH is designed specifically for general cleaning and disinfecting in homes, hospitals, nursing homes, schools and hotels. It is formulated to disinfect inanimate hard surfaces such as walls, sink tops, tables, chairs, telephones, bathrooms, shower stalls, bathtubs, hampers, cabinets and bed springs. In addition, SPRAY FRESH deodorizes those areas which generally are hard to keep fresh smelling, such as garbage storage areas, empty garbage bins and cans, basements, restrooms and other areas which are prone to odors caused by microorganisms. This product, when used on environmental, inanimate, non-porous surfaces, exhibits effective virucidal activity against HIV-1 (associated with AIDS). Available fragrances: Lemon, Pine, Floral, Bouquet. DISINFECTION, DEODORIZING AND CLEANING - Hold SPRAY FRESH container six to eight inches from surface to be treated. Spray area until it is covered with the solution. Allow product to penetrate and remain wet for 10 minutes. No scrubbing is necessary. Wipe off with a clean cloth, mop or sponge. SPRAY FRESH will not leave grit or soap scum. For heavily soiled areas, remove gross soil before treatment. MILDEWSTAT - To control mold and mildew on pre-cleaned, hard, non-porous surfaces spray surface to be treated making sure to wet completely. Let air dry. Repeat application at weekly intervals or when mildew growth appears. BACTERICIDAL ACTIVITY - When used as directed, SPRAY FRESH exhibits effective disinfectant activity against the organisms: Staphylococcus aureus, Salmonella choleraesuis and Pseudomonas aeruginosa and meets all requirements for hospital use. EFFICACY TESTS HAVE DEMONSTRATED THAT SPRAY FRESH IS AN EFFECTIVE BACTERICIDE AND FUNGICIDE IN THE PRESENCE OF ORGANIC SOIL (5% BLOOD SERUM). MANUFACTURED FOR: LYN DISTRIBUTING 965 North Redwood Road North Salt Lake, Utah 84054 Phone 295-5022 Outside Salt Lake City Area 800-366-5022 DATE 03/15/2000

150

150

Two Roll Standard Tissue Dispensers - R25

Dispenses universal rolls up to 5.30” diameter. Provides easy access to reserve roll. Contemporary design saves space, prevents theft, and encloses

rolls for maximum hygiene. Double latch metal lock works with standard metal key. Heavy gauge metal back and durable white or transparent plastic front.

#R25WH-10 = White #R25TS-10 = Transparent

Indestructible Toilet Tissue Dispensers This tissue dispenser is vandal resistant. It is made of 3/8" thick steel, and

comes in white or Silver in three sizes(padlock not included). Optional keyed-alike padlock available.

#200T WHT- White Triple 16.5"w X 6"d X 2"h #200T SPKL- Silver Triple 16.5"w X 6"d X 2"h

#200T(R) WHT-White Triple 16.5"w X 6"d X 2"h #200T(R) SPKL-Silver Triple 16.5"w X 6"d X 2"h

#200D WHT-White Double 12"w X 6"d X 2"h #200D SPKL-Silver Double 12"w X 6"d X 2"h

#200D(R) WHT-White Double 12"w X 6"d X 2"h #200D(R) SPKL-Silver Double 12"w X 6"d X 2"h

#200S WHT- White Single 5.25"w X 6"d X 2"h #200S SPKL- Silver Single 5.25"w X 6"d X 2"h

#200S(R) WHT- White Single 5.25"w X 6"d X 2"h #200S(R) SPKL- Silver Single 5.25"w X 6"d X 2"h

Option "R" for wider (1-3/4") cross-bar option (1-3/4") to slow down dispensing of tissue.

No-Waste Tissue Dispensers - R201-R221-R401-R421 Tissue rolls 1/2 revolution - rocking action returns roll for next sheet delivery. Controlled delivery saves tissue and money by eliminating waste. Anti-theft pin on spindles prevents tissue roll theft. Often specified by architects. Available in tough epoxy

coated die-cast aluminum or high impact ABS plastic. “U” indicates free-turning unit. #R201, #R201U, #R401, #R401U - Hold One Roll, Base is 6-1/2” x 1-3/4” Fits core to1-1/2”. Dispensers starting with a 2 are die-cast Aluminum. Dispensers

starting with a 4 are high impact ABS plastic. #R221, #R221U, #R421, #R421U - Hold Two Rolls, Base is 13” x 1-3/4” Fits core to1-1/2”. Dispensers starting with a 2 are die-cast Aluminum. Dispensers starting with a 4 are high impact ABS plastic.

Lyn Distributing 965 North Redwood Road, North Salt Lake, Utah 84054 Web site www.lyndist.com Phone 1-800-366-5022 Salt Lake City Area 295-5022 Fax 1-801-292-6196

Page 1

151

151

# DISP_1400BK ELECTRONIC ROLL TOWEL DISPENSER, SMART SYSTEM BLACK DISPENSING FLEXIBILITY. Preset (S-M-L) paper length and delay buttons for portion and usage control. Auto Transfer dispenses new roll when old roll is finished. INFINITY® SYSTEM ELIMINATES STUB ROLL WASTE. Easy-to-use, Infinity System’s Auto Transfer ensures complete roll usage. Dispenser size is 15 1/2 inch h x 13 inch wide x 9 5/8 inch deep. Construction: Break resistant plastic. Capacity:One 8 inch (200mm) wide roll; 8 1/2 inch (215mm) diameter. and a 4 inch (100mm) stub roll. Towel Core Diameter: 1 1/2 inch (38 mm) or larger. Requires 4 D Cell Alkaline Batteries. Up to a year battery life. Dispenses 90-100 800ft. rolls per battery life.

# DISP_1400BL ELECTRONIC ROLL TOWEL DISPENSER, SMART SYSTEM

TRANSLUCENT BLUE DISPENSING FLEXIBILITY. Preset (S-M-L) paper length and delay buttons for portion and usage control. Auto Transfer dispenses new roll when old roll is finished. INFINITY® SYSTEM ELIMINATES STUB ROLL WASTE. Easy-to-use, Infinity System’s Auto Transfer ensures complete roll usage. Dispenser size is 15 1/2 inch h x 13 inch wide x 9 5/8 inch deep. Construction: Break resistant plastic. Capacity:One 8 inch (200mm) wide roll; 8 1/2 inch (215mm) diameter. and a 4 inch (100mm) stub roll. Towel Core Diameter: 1 1/2 inch (38 mm) or larger. Requires 4 D Cell Alkaline Batteries. Up to a year battery life. Dispenses 90-100 800ft. rolls per battery life.

LEVER R0LL TOWEL DISPENSER WithOut TRANSFER MECH BLACK # 1100BK BLUE # 1100BL

Lever Roll Towel Dispenser without Transfer Mechanism.

Universal lever action dispenser handles all types of towels without jamming. Large capacity allows longer intervals between refills.

Holds rolls up to 8 inch wide and up to 8 1/2 inch diameter. Break resistant plastic construction with Bio Pruf treated handle to resist

bacterial growth. 13 wide x 9-5/8 deep x 15-1/2 high

# 400TBK TOWEL DISPENSER CENTER PULL TRANSPARENT BLACK

Classic Center Pull Towel Dispenser Offers hygienic single sheet

dispensing. Easy to load-holds 9” diameter roll of 9-1/2” wide center pull towels. Plastic. Transparent black pearl cover white back. Towels sold

separately. 9-1/8” wide x 9-1/2” deep x 11-5/8” high.

Lyn Distributing 965 North Redwood Road, North Salt Lake, Utah 84054 Phone 1-800-366-5022 Salt Lake City Area 295-5022 Fax 1-801-292-6196

152

152

Hands free towel dispensing Universal for most 8” wide roll towels Auto-cuts and dispenses pre-measured sheets Automatically transfers up to 2.75-inch stub roll. Transparent plastic front to view towel usage level Construction: Impact Resistant Plastic front with Rust Resistant Metal Back.

Hands Free Dispenser

The model T205-10 hands free roll towel dispenser was design for ultimate hygienic practices. A user never needs to touch the dispenser. Simply pull down on the roll towel and a new pre-measured sheet is dispensed from the dispenser. No need to touch the dispenser to receive a new towel. Dispenser uses most generic roll towels that are 8 inches wide and have a diameter of 8” or less. Company warrants each new product to be free from defects in material and workmanship to commercial and institutional purchasers.

Universal lever-action roll towel dispenser for rolls up to 8” diameter and 8” wide. Automatic transfer system allows complete usage of stub rolls up to 4” diameter. Heavy gauge metal back and durable white or transparent plastic front. Double latch standard key lock for safety. Model Capacity Dimensions Color T215TS-10 8” wide rolls 10 ½ w X 15 ¾ h X 8 ¾ d Transparent T215WH-10 One 8”dia. roll 10 ½ w X 15 ¾ h X 8 ¾ d White and a 4”stub roll Construction: 20 – gauge steel back and impact resistant plastic front.

ADA Approved Dispensers

LYN DISTRIBUTING SERVING CITIES ALL ACROSS AMERICA PHONE 1-800-366-5022 INTERNET ACCESS WWW.LYNDIST.COM

Auto-Transfer Lever Roll Towel Dispenser

153

153


Twin 9” JBT Dispensers

LYN DISTRIBUTING SERVING CITIES ALL ACROSS AMERICA PHONE 1-800-366-5022 INTERNET ACCESS WWW.LYNDIST.COM

Universal for all brands of 9” JBT (Jumbo Bath Tissue). Double latch standard key lock for safety. Impact resistant plastic with white or transparent plastic front. Model Capacity Dimensions Core Color R27WH-10 2 Jumbo Rolls 5-3/8”w X 11 ¾” h X 20-1/4” d 2-1/4” – 3-3/8” White R27TS-10 2 Jumbo Rolls 5-3/8”w X 11 ¾” h X 20-1/4” d 2-1/4” – 3-3/8” Transparent

Construction: Impact Resistant Plastic.

154

154


30 Ounce Foamy Soap Dispenser

This foam soap dispenser has a sleek, smooth modern design that complements any decor. The Foam•eze® Bulk foam soap dispenser is made of

durable ABS for extended lifetime of dispenser. These foam soap dispensers have a sight window that indicates level of soap remaining so you don’t have to open the dispenser to see if it needs refilled. These foam soap dispensers are ADA compliant with push bar operation for dispensing of foamy soap. Foam•eze® Bulk Foam Soap Dispenser have a key lock for maximum security or optional universal access your choice. Foam•eze® Bulk Foam Soap have a 1000 ml (33.8 oz.) refillable bottle which reduces environmental waste; features vented large screw cap for easy refilling. Each push dispenses 0.7 ml of liquid in the form of foam soap. The field tested foam pump mechanism in this foam soap dispenser lasts through several thousand cycles to give long life to this foam soap dispenser. Foam soap dispenser comes with refillable bottles marked "FOAM SOAP" to insure proper use and are recyclable. Extra bottles are available. This foam soap dispenser handles most foam soaps and bulk foam sanitizers from 0-14

centipose (cps). N9325-6 Bulk Foam Soap Dispenser is white/gray in color and the size is 11 " H x 4-7/8" W x 4 ¾” D N9326-6 Bulk Foam Soap Dispenser is black/gray in color and the size is 11 " H x 4-7/8" W x 4 ¾” D

LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, Utah. 84054 Phone Salt Lake Area 801- 295-5022 Outside Salt Lake Area 1-800-366-5022

155

155

The #1000 sensor dispenser was designed for use with our disposable or reusable pumps: 1) Foam pump for foaming liquid soaps. 2) Spray pump for liquid alcohol based disinfectants and sprayable soaps. 3) Standard pump for liquid soaps, gels, lotions of any viscosity and products with or without grit. Approximate dosage per use: Liquid soap: 1 ml or Spray: 1.25 ml. Capacity: 1,000 ml. Construction: Plastic. For use with: Foam soap, liquid soap, lotion, liquid alcohol based disinfectants and grit products. Special features: Foam, spray or regular soap. Disposable pump and refill cartridge system. INSTALLATION NOTE: please observe that the minimum distance between the bottom of the dispenser and a counter-top is 12" (30 cm).

Price:

Sensor Dispenser $140.00

Alcohol hand sanitizer price

$22.00 per gallon in liquid form or gel sanitizer form.

4 gallon per case.

1 gallon will fill the dispenser 4 times.

The #1000 manual dispenser was designed for use with our disposable or reusable pumps: Approximate dosage per use: Liquid soap: 1 ml or Spray: 1.25 ml. Capacity: 1,000 ml. Construction: Plastic. For use with: Foam soap, liquid soap, lotion, liquid alcohol based disinfectants and grit products. Special features: Foam, spray or regular soap. Disposable pump and refill cartridge system. Dispenser price $25.00

Lyn Distributing P.O. Box 208 Layton, Utah 84041

Phone 1-800-366-5022 Fax 801-292-6196

156

156

#N3311-10 WHITE -36oz. LOTION SOAP DISPENSER

• Bulk-loading system. Saves money over prepackaged small cartridges of lotion soaps

• Two portion control settings for adjustable flow control.

• Mounts easily – adhesive backing or screws. • Complies with ADA accessibility guidelines –

requires less than 5 pounds of force to operate. • Comes in bright white (N3311-10) and

executive black (N3313-10). • Clear walls for easy viewing of refill levels to

save time for sanitation people.

#N8511-10 WHITE -85oz. LOTION SOAP DISPENSER

• Bulk-loading system. Saves money over prepackaged small cartridges of lotion soaps

• Two portion control settings for adjustable flow control.

• Mounts easily – adhesive backing or screws. • Complies with ADA accessibility guidelines –

requires less than 5 pounds of force to operate. • Comes in bright white (N8511-10) and executive

black (N8513-10). • Clear walls for easy viewing of refill levels to save

time for sanitation people. • No metal parts, so unit stays clean in even the

highest humidity areas.

#N1300-10 • Manufactured of hi-impact corrosion-resistant ABS

plastic. • For 4 liter/ 1 gallon flat-top bottle, approximately

1.4 cc per crank • Contains built-in reservoir for ready supply of

product. • #N1300S-10 Swivel adapter fits on back-plate for

#N1300-10, allows for easy, no mess placement and removal of flat top bottles.

LYN DISTRIBUTING DENVER, PORTLAND, CHICAGO, DALLAS, HOUSTON, SALT LAKE CITY, LOS ANGLES, PHOENIX, SACRAMENTO, OMAHA, TULSA, BOISE, TAMPA. PHONE 1-800-366-5022

157

157

158

158

159

159

#NS46-10 46 oz. Bulk Soap Dispenser

Accommodates a wide variety of liquid and lotion soaps except pumice. Large push bar meets ADA requirements and dispenses approximately 1cc per stroke. Smooth, curved design prevents bacteria growth and unsightly smoke burns. See-thru tank allows easy view of soap level. Dimensions 8-1/2"h x 5-1/4"w x 5-1/4"d.

#NS30-10 30 oz. Bulk Soap Dispenser

Accommodates a wide variety of liquid and lotion soaps except pumice. Large push bar meets ADA requirements and dispenses approximately 1cc per stroke. Smooth, curved design prevents bacteria growth and

unsightly smoke burns. See-thru tank allows easy view of soap level. Dimensions 6-1/4"h x 4-1/2"w x 4"d

#ND51BLK-10 OR #ND51BLKWH-10 51 oz. Bulk Soap Dispenser

The bulk refillable D51 Soap Dispenser is ideal for use with liquid hand soap, shampoo, gel and lotion. It comes equipped with a trick-lock to prevent unauthorized access to the product content.

The D51's large 1,500 ml reservoir requires less refilling therefore saving personnel time. The D51 is easy to refill and should never be empty. The translucent reservoir allows maintenance personnel to view soap levels

from a distance. The simple one-hand push-button operation pushes the dispenser towards the wall, reinforcing its mounting every time the dispenser is used. There are two color combinations to choose from.

You can customize this dispenser with your company logo. The unit is mounted using a unique wall bracket that allows a quick and easy removal of the dispenser for a

thorough cleaning. To clean the dispenser, simply rinse with warm water or place in the dishwasher.

LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, Utah. 84054 Phone Salt Lake Area 801-295-5022 Outside Salt Lake Area 1-800-366-5022

160

160

#NZCV-10 • Suitable for high

viscosity hand cleaning preparations including beaded products, pumice products, as well as lotion soaps and creams. Robust version for industrial use with large 2.5 liter capacity.

• Ideal dispenser for industrial purposes, suitable for all high usage environments.

• Dispenser can be operated by hand, forearm or elbow.

• Easy to refill cartridges, or purchase filled cartridges.

• Holds 2.5 liter per cartridge and pump dosage is 3 ml. Per stroke.

LYN DISTRIBUTING DENVER, PORTLAND, CHICAGO, TAMPA, DALLAS, HOUSTON, BOISE, SALT LAKE CITY, LOS ANGLES, PHOENIX, SACRAMENTO, OMAHA, TULSA, PHONE 1-800-366-5022

161

161

Sensor Dispensing of Foam Hand Soaps This automatic dispensing foaming hand soap dispenser hold 32 ounces

of foaming hand soap. Place hands under the foaming hand soap dispenser within 1 inch of bottom of dispenser and the sensor will dispense

approximately .4cc of liquid into a rich foam. Battery operated dispenser use 3 c-cell batteries. Batteries should last 18 to 24 months before replacement.

46 Ounce Foamy Soap Dispenser

LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, Utah. 84054 Phone Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

162

162

Accessories: Model 200 Hitch-Back. Converts the Model 2107 from a push fogger into a pull behind fogger in just minutes. The Hitch-Back attaches the fogger to a garden tractor, riding mower, golf cart or fork lift with a hitch pin.

Specifications: Model 2107 Thermo Fogger Engine Briggs & Stratton Heavy duty, 4-cycle Horsepower 5 HP Fuel Lead-free gasoline Type Unit Thermal Fogger: using oil-based insecticides Heating Principle Two-stage Turbo Fogger

1.First Stage: "Friction-disc" that pre-heats oil based insecticide 2.Second Stage: exposure to hot exhaust air blast Formulation Output Controllable from 0-6 gallons per hour (Dry fog, 4 gallons per hour) Filter Cleanable/Replaceable Fog Particle Size Controllable from 0-50 microns, Flameless low temperature Fuel Tank Capacity 1/2 gallon Formulation Tank Capacity 5 gallons (accessible, extra-large fill area reduces spillage) Engine Running Time 1 1/4 hours Starter Manual Weight 83 pounds Shipping Weight 88 pound Shipping Dimensions (L)25" (H)21" (W)25"

Featuring: • Large 20" ball bearing wheels • Adjustable height handle • Big 3" mouth on formulation tank for easy

filling • Low maintenance-easy start Briggs&Stratton

engine • Kick stand for stable parking • Flameless One year limited warranty

MODEL 2107 THERMO FOGGER

LYN DISTRIBUTING Denver, Chicago, Dallas, Houston, Boise, Tampa, Tulsa, Omaha, Salt Lake,

Los Angles, Portland, Phoenix, PHONE 1-800-366-5022

163

163

The Mobile Thermo Fogger - Model 2108

Specifications: Model 2108 Thermo Fogger Engine Briggs & Stratton Heavy duty, 4-cycle Horsepower 5 h.p. Fuel Lead-free gasoline Type Unit Thermal Fogger: using oil-based insecticides Heating Principle Two-stage Turbo Fogger

1. First Stage: "Friction-disc" that pre-heats oil based insecticide 2. Second Stage: exposure to hot exhaust air blast

Formulation Output Controllable from 0-6 gallons per hour (Dry fog, 4 gallons per hour)

Filter Cleanable/Replaceable Fog Particle Size Controllable from 0-50 microns Flameless low temperature Fuel Tank Capacity 1/2 gallon Formulation Tank Capacity 5 gallons (accessible, extra-large fill area reduces spillage) Engine Running Time 1 1/4 hours Starter Manual Weight 82 pounds Shipping Weight 87 pound Shipping Dimensions (L)25" (H)21" (W)25"

Featuring: • Large 20" ball bearing wheels • Easy attachment to most vehicles

with a hitch pin • Big 3" mouth on formulation tank for

easy filling • Low maintenance-easy start

Briggs&Stratton engine • Flameless One year limited warranty

Accessories: Model 201 Push Kit. Converts the Model 2108 from a pull behind fogger into push fogger in just minutes. This allows fogger use when vehicle is not available or when distance and/or area favors walking with the fogger. Kit contains U-shaped handle and kickstand assembly, for stable parking.



164

164

A Durable General Purpose Fogger The time-proven Fogmaster Tri-Jet ® 6208 fogger serves the needs of a wide range of uses for both indoor and outdoor application. Food plants, hotels, barns, parks and hospitals are just a few examples of sites which depend on the Fogmaster Tri-Jet for effective treatment. This pioneering unit, now in its fourth decade of service, provides the standard of reliability against which other foggers are measured. It's in daily use for such diverse applications as controlling odors, disinfecting and sanitizing, carpet mildew control, flood and fire damage restoration, controlling mosquitos, flies and other insects, dispensing water for humidification and dust control and a host of innovative applications. The portable 6208 is a "cold fogger" -- it handles both water- and oil-based solutions -- and has a one-turn control knob to adjust particle size and degree of misting. The dispensing rate is easy to calibrate in the field to compensate for differences in liquid density or viscosity. The Tri-Jet fogging head can be adjusted at up or down angles as required. Made of durable aluminum, it's lightweight, but tough enough to justify its five-year limited warranty. More uses than ever ... another effective solution from Fogmaster SPECIFICATIONS Motor 1 Hp, 120V AC/DC, 7 amp Optional: 240V, 3.5 amp Fogging Nozzle Three counter-rotating vortex nozzles Particle Size 15-30 micron VMD, adjustable Chemicals Handles both oil- and water-based chemical solutions (Liquid viscosity and density affect particle size distribution) Liquid Flow Rate 0-10 oz/min [0-300 ml/min], adjustable Tank Capacity 1 gallon [4 liters] Materials of Construction Power head housing and tank - aluminum Tubing - fuel and oil resistant vinyl Fittings and control valve - brass Nozzle - Celcon Dimensions H x L x Dia: 15.4 x 12.5 x 8.6 in [39 x 32 x 22 cm] Shipping Weight 12 pounds Warranty Period Five years

LYN DISTRIBUTING BOISE, CHICAGO, DENVER, DALLAS, HOUSTON, LOS ANGLES,

PORTLAND, SALT LAKE, SACROMENTO, TAMPA PHONE 1-800-366-5022

165

165

Model 3901 Heavy Duty Thermo Fogger

Specifications: Model 3901 Heavy Duty Thermo Fogger Briggs & Stratton Heavy duty, 4-cycle Horsepower 10 HP Fuel Lead-free gasoline Type Unit Thermal Fogger: using oil-based insecticides Heating Principle Two-stage Turbo Fogger

1.First Stage: "Friction-disc" that pre-heats oil based insecticide 2.Second Stage: exposure to hot exhaust air blast Formulation Output Controllable from 0-25 gallons per hour

(Dry fog, 16 gallons per hour) Filter Cleanable/Replaceable Fog Particle Size Controllable from 0-50 microns, Flameless low temperature Fuel Tank Capacity 1 1/2 gallon Engine Running Time 1 1/4 hours Starter Manual Weight 180 pounds Shipping Weight Approximately 201 pounds Shipping Dimensions (L)44" (H)31" (W)24" (Cu. Ft.)18.9'

Featuring: • Easy start, low maintenance Briggs &

Stratton engine • Adjustable output and micron size • Remote truck cab control included • Flameless • One year limited warranty • Formulation Filter - cleanable • One man operation



166

166

Model 3902 Heavy Duty Thermo Fogger

Specifications: Model 3902 Heavy Duty Thermo Fogger Briggs & Stratton Heavy duty, 4-cycle Horsepower 10 HP Fuel Lead-free gasoline Type Unit Thermal Fogger: using oil-based insecticides Heating Principle Two-stage Turbo Fogger

1. First Stage: "Friction-disc" that pre-heats oil based insecticide 2. Second Stage: exposure to hot exhaust air blast Formulation Output Controllable from 0-25 gallons per hour

(Dry fog, 16 gallons per hour) Filter Cleanable/Replaceable Fog Particle Size Controllable from 0-50 microns, Flameless low temperature Fuel Tank Capacity 1 1/2 gallon Formulation Tank Capacity 15 gallons (Accessible, extra-large fill area reduces spillage) Engine Running Time 1 1/4 hours Starter Manual Weight 201 pounds Shipping Weight Approximately 226 pounds Shipping Dimensions (L)44" (H)31" (W)24" (Cu. Ft.)18.9'

Featuring: • Easy start, low maintenance Briggs &

Stratton engine • 15 gallon steel formulation tank • Adjustable output and micron size • Remote truck cab control included • Flameless • One year limited warranty • Formulation Filter - cleanable • One man operation



167

167


RED HI-TEMP NO MELT GREASE # G1008-1 TUBES # G1008-120-1 120 POUND DRUM # G1008-420-1 420 POUND DRUM # G1008-45-1 45 POUND PAIL # G1008-7-1 7 POUND CAN * * MAY BE USED WITH # G1014-1 MINI LUBE PORTABLE GREASE GUN

168

168


ULTRA HIGH TEMPERATURE GREASE / LUBRICANT

# G1019-TB-1 TUBES # G1019-45-1 45 POUND PAIL # G1019-120-1 120 POUND DRUM # G1019-7-1 7 POUND CAN * * USE WITH # G1014-1 MINI LUBE PORTABLE GREASE GUN

169

169


MOLY HEAVY DUTY HIGH TEMPERATURE LUBRICANT

# G1006-1 TUBES # G1006-120-1 120 POUND DRUM # G1006-420-1 420 POUND DRUM # G1006-45-1 45 POUND PAIL # G1006-7-1 7 POUND CAN * * USE WITH # G1014-1 MINI LUBE PORTABLE GREASE GUN

170

170

GREEN SUPER IMPACT GREASE Item # G1007-1 Tube Grease # G1007-120-1 120-Pound Small Drum # G1007-420-1 420-Pound Large Drum LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, Utah 84054 Phone Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

171

171


WHITE GUARD U.S.D.A H-1 GREASE

# G1003-1 TUBES # G1003-120-1 120 POUND DRUM # G1003-420-1 420 POUND DRUM # G1003-45-1 45 POUND DRUM # G1003-7-1 7 POUND CAN

172

172

Our multi-purpose gear oils are formulated with premium quality paraffin base stocks especially for heavy-duty requirements. These products are designed to withstand the most severe shock loads, where in most cases, conventional types of lubricants will tend to break down and allow metal to metal contact. Our gear oils are specially

blended with extreme pressure additives and adhesive and cohesive agents that make them immediately climb and cling to gears to provide maximum protection. May

be used in virtually all types of enclosed gears. USER BENEFITS 1. Reduces frequency of oil changes. 2. Prevents metal to metal contact, so oil remains on gears No dry starts. 3. Excellent oxidation stability-With every 20 degree temperature rise oxidation doubles. Our gear oils are formulated with special oxidation inhibitors to remain stable under oxidation and breakdown conditions-Thus longer oil life. 4. Non-foaming. 5. Will not mix and emulsify with water. 6.Prevents rusting and is non-corrosive. 7.Helps prevent leakage through loose seals. 8.Low pour point-Efficient starting in low temperature conditions. 9.Minimum wear on gears.

PERFORMANCE CHARACTERISTICS: Meets and/or Exceeds: MIL-L-2105C; A.P.I. GL2-GL5; CRC L-33 Moisture and Corrosion test; CRC L-37 High Torque Axle Test; ASTM D-892 Foam Test; ASTM D-130 Copper Corrosion Test; Mack GO-G; John Deere J11D; ICH B-22; Clark MS-8; Terex EEMS 19003; White Motors MS 0016; Ford M2 C 105A; Ford M2 C108C; GM Spec. No. 9985044 and 9985182; Chrysler MS 3636; Chrysler MS 3725; All equipment manufacturers specifying the use of MIL-L-2105-B or MIL-L-2105-C type lubricant or equivalent. Pour Point, -22 deg.F PRECAUTIONS: SAE weight selected for a particular type of equipment should correspond with the recommended weight and temperature recommendations in the owners manual. LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, Utah 84054 PHONE 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

HI-LOAD EXTREME PRESSURE

GEAR OIL SAE 90

173

173

Our multi-purpose gear oils are formulated with premium quality paraffin base stocksespecially for heavy duty requirements. These products are designed to withstand the

most severe shock loads, where in most cases, conventional types of lubricants willtend to break down and allow metal to metal contact. Our gear oils are specially

blended with extreme pressure additives and adhesive and cohesive agents that makethem immediately climb and cling to gears to provide maximum protection. May be

used in virtually all types of enclosed gears.USER BENEFITS1. Reduces frequency of oil changes. 2. Prevents metal to metal contact, so oil remains ongears No dry starts. 3. Excellent oxidation stability-With every 20 degree temperature riseoxidation doubles. Our gear oils are formulated with special oxidation inhibitors to remainstable under oxidation and breakdown conditions-Thus longer oil life. 4. Non-foaming. 5. Willnot mix and emulsify with water. 6.Prevents rusting and is non-corrosive. 7.Helps preventleakage through loose seals. 8.Low pour point-Efficient starting in low temperatureconditions. 9.Minimum wear on gears.

PERFORMANCE CHARACTERISTICS: Meets and/or Exceeds: MIL-L-2105C;A.P.I. GL2-GL5; CRC L-33 Moisture and Corrosion test; CRC L-37 High Torque Axle Test;ASTM D-892 Foam Test; ASTM D-130 Copper Corrosion Test; Mack GO-G; John DeereJ11D; ICH B-22; Clark MS-8; Terex EEMS 19003; White Motors MS 0016; Ford M2 C 105A;Ford M2 C108C; GM Spec. No. 9985044 and 9985182; Chrysler MS 3636; Chrysler MS3725; All equipment manufacturers specifying the use of MIL-L-2105-B or MIL-L-2105-C typelubricant or equivalent. Pour Point, 5°F. PRECAUTIONS: SAE weight selected for aparticular type of equipment should correspond with the recommended weight andtemperature recommendations in the owners manual.

LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, Utah 84054PHONE 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

HI-LOADEXTREME PRESSURE

GEAR OIL SAE 140

174

174

ALCOHOL GEL INSTANT HAND SANITIZER

Ø Evaporates Quickly

Ø Leaves Hands Soft


Excellent for use by hospitals, dental personnel, children care services, nursing homes, veterinarians, labs, emergency response teams, police and fire personnel, correctional facilities, money handling and food service workers.

This product instantly sanitizes hands without water or towels. The special blend of emollients and ethyl alcohol leaves hands sanitized, smooth and conditioned without an antiseptic smell. Helps prevent bacterial transfer and reduces hospital-acquired infections. Excellent for use by hospitals, dental personnel, children care services, nursing homes, veterinarians, labs, emergency response teams, police and fire personnel, correctional facilities, money handling and food service workers. Not a substitute for washing hands from heavy soil. Important to use regular hand hygiene methods.

No water or towels required. Apply a small amount to clean, dry hands. Rub lightly until dry. Will air dry in 15 seconds leaving hands with a clean, fresh citrus fragrance. WARNING: KEEP AWAY FROM FIRE OR FLAME. For external use only. Do not use in or near the eyes. In case of eye contact, flush with water for 15 minutes. Consult physician if irritation persists. In case of ingestion, seek medical assistance or consult a poison control center immediately. Keep out of reach of children. Close spout after use to avoid evaporation. Store below 95º F. ACTIVE INGREDIENTS: 60% Ethyl Alcohol

Description

Areas of Use

Directions

175

175

Clear Antibacterial Skin Cleanser 303 Active ingredient .03% Triclosan™ kills a broad

spectrum of bacteria and yeasts, and helps to prevent the growth of gram-positive and gram-negative

pathogens. Clear antibacterial soap gentle enough for the most sensitive skin. Formulated for healthcare

workers or other frequent hand washers. Hypoallergenic-no harsh fragrances or dyes.

Will not stain nonporous countertops. Light Spicy-Lemon fragrance.

Cleans hands and kills 99.5% of germs as you wash. Combines mild cleansing agents with emollients.

Contains: Sodium Laureth Sulfate (and)Sodium Lauryl Sulfate (and)Clear Liquid 42 Disodium Oleamido MEA Sulfosuccinate (and)Cocamide DEA

(and) Cocamidopropyl Betaine (Active Ingredient:Triclosan)

Packaged in: 12 ounce pump bottle 12 per case. 4-1 gallon bottles per case

Clear Antibacterial Skin Cleanser 101

Rich lathering liquid soap with a formulation of mild yet effective skin cleaners. Conditioners and moisturizing agents smooth and protect skin while maintaining its

natural pH balance. USDA Classification E4. Healthcare personnel hand wash that reduces the risk of cross

contamination. Contains 0.3% parachlorometaxylenol (PCMX).

Will not stain nonporous countertops. Light spicy-fruit fragrance.

Cleans hands and kills 99.5% of germs as you wash. Combines mild cleansing agents with emollients.

Contains: Sodium Laureth Sulfate (and)Sodium Lauryl Sulfate (and)Clear Liquid 42 Disodium Oleamido MEA Sulfosuccinate (and)Cocamide DEA

(and) Cocamidopropyl Betaine Active Ingredient 0.3% parachlorometaxylenol (PCMX).

Packaged in: 12 ounce pump bottle 12 per case. 4-1 gallon bottles per case

176

176

BAC-BREAK Hand Sanitizer Solution

Category E3 (Hand Sanitizing Compounds) Description Lyn Distributing's Bac-Break is an effective hand dip sanitizer which has been authorized by USDA for use in federally inspected meat, poultry and food processing plants. BTC 2125M (50%)....................................................................................... 20.0 Water ......................................................................................................... 80.0 100.0% Appearance................................................................................................. clear liquid pH as is ...................................................................................................... 7.2 Density, lbs/gal. ........................................................................................... 8.24 Directions Prepare a 200 ppm active quaternary solution by adding 1 ounce of 10% Bac-Break to 4 gallons of water. Thoroughly wash and rinse the hands prior to sanitizing with the solution. Dip hands into sanitizing solution; remove hands from solution and allow to remain wet for at least 60 seconds. A potable water rinse is not necessary after the hands have been sanitized.

Lyn Distributing 965 North Redwood Road, North Salt Lake, Utah 84054 Phone 801-295-5022 www.lyndist.com Fax 801-295-5044

177

177

Description: A pearlescent, biodegradable, industrial hand and skin cleaner which safelyremoves heavy industrial soils with complete gentleness to skin. Contains lanolin, moisturizers,and emollients that leave the skin moist. Heavy soils such as grease, oil, carbon, fresh inks, andpaints are removed safely. Contains no solvents, abrasives or caustics.

Directions: Rub cleaner well into soiled hands. Take a small amount of water and work intolather. Work lather into all dirt until removed. Rinse off with water and dry hands. This is aconcentrated hand and skin cleanser and may be diluted for use as follows:For Removal Of:Graphite, carbon, paint, tar & heavy grease & grime: Dilute 1:1 with waterLight Shop Oils: Dilute 1:1 with waterLight Grease & Grime: Dilute 1:2 with waterLiquid Soap Dispenser Use: Dilute 1:2 with waterUse in Showers: Dilute 1:3 with water

CAUTION: Do not ingest. if this should occur, drink large volumes of water and seek medicalattention. Avoid storage of product in freezing temperatures. Keep container sealed when not inuse. Rinse empty container before discarding in an authorized landfill site. KEEP OUT OFREACH OF CHILDREN.

HMIS RATING: Health-0; Flammability-0; Reactivity-0; Personal Protection-.0Product Specifications:Color: Yellow pH: 7 – 8Flash: None Odor: CitrusLbs./gal.: 8.7Shelf Life: One year in a sealed container

MANUFACTURED BY: LYN DISTRIBUTING965 North Redwood Rd. North Salt Lake, Utah 84054Phone in Salt Lake Area 801-295-5022 outside Salt Lake Area 800-366-5022

178

178

Description: This highly effective waterless hand cleaner has been formulated using hard working

surfactants, mild solvents, a blend of skin conditioning emollients and is fortified with scrubbing pumice particles for additional cleaning power. This product will clean the most stubborn soils from hands while skin conditioners protect hands from irritation and chapping. Ready to use. This product contains bacteria fighting ingredients, to help heal hands and skin.

Markets: Industrial plants, forklift shops, city road shop, county road shop, state road shops,

auto transport shops, grounds maintenance shops, building maintenance shops, machine shops, fire stations, factories, rest rooms, automobile dealerships, golf course maintenance shops, tire repair shops, service stations.

Directions for use: Work into hands until grime is liquefied, then wipe hands clean with

the paper towels or rinse off with water, notice how well the product removed some very difficult grease. Note the conditioning properties of Cool Blue Hand Cleaner!

Available in: 1 gallon bottle 4 or 6 per case, 6 gallon container, 55 gallon drum.

Lyn Distributing 965 North Redwood Road North Salt Lake, Utah 84054 Phone 801-295-5022 www.lyndist.com fax 801-295-5044

CCCOOOOOOLLL BBBLLLUUUEEE Hand Cleaner Cleans and Conditions Skin - Contains Pumice for Deep Scrubbing for tuff to clean hands. Cool Blue contains skin conditions

to leave hands conditioned after use.

179

179

Crystal Lotion Soap Mild Effective shampoo & hand soap

Crystal Lotion Soap is a gentle, yet effective liquid body shampoo and hand soap containing emollients and skin conditioners that leaves skin soft, moist and smooth.

Crystal Lotion Soap is also a gentle shampoo that gives hair a new bounce and radiance. Very

economical lotion soap and does not deplete natural skin oils or cause chapping.

For body washing, showering and sponge bathing...Apply to damp cloth, clean and rinse thoroughly.

For shampooing...Wet hair, apply Crystal Clear, lather and rinse.

As a hand soap...Dispense 5 cc. of Crystal Lotion Soap into the palm of one hand. Clean and

rinse thoroughly.

COLOR: Clear FRAGRANCE: Light, French Vanilla

Ingredients: , Water, 1,3-dihydroxymethyl-5,5-dimethylhydantoin: dmdm hydantoin: 1,3-dimethylol-5,5-dimethylhydantoin: 1,3-di(hydroxymethyl)-5,5-dimethyl-2,4-imidazolidinedione. Glycerin, Sodium Lauryl

Ether Sulfate, Cocamidopropyl Betaine, sodium lauryl sulfate, Citric Acid, Fragrance.

Lyn Distributing 965 North Redwood Road, North Salt Lake, Utah 84054

Phone 801-295-5022

180

180

Crystal Red Lotion Soap Mild Effective shampoo & hand soap

Crystal Red Lotion Soap is a gentle, yet effective liquid body shampoo and hand soap containing emollients and skin conditioners that leaves skin soft, moist and smooth.

Crystal Red Lotion Soap is also a gentle shampoo that gives hair a new bounce and

radiance. Very economical lotion soap and does not deplete natural skin oils or cause chapping.

For body washing, showering and sponge bathing...Apply to damp cloth, clean and rinse thoroughly.

For shampooing...Wet hair, apply Crystal Clear Red, lather and rinse.

As a hand soap...Dispense 5 cc. of Crystal Red Lotion Soap into the palm of one hand.

Clean and rinse thoroughly.

COLOR: Clear Red FRAGRANCE: Light, Orange Sherbet

Ingredients: , Water, 1,3-dihydroxymethyl-5,5-dimethylhydantoin: dmdm hydantoin: 1,3-dimethylol-5,5-dimethylhydantoin: 1,3-di(hydroxymethyl)-5,5-dimethyl-2,4-imidazolidinedione. Glycerin, Sodium Lauryl

Ether Sulfate, Cocamidopropyl Betaine, sodium lauryl sulfate, Citric Acid, f d & c red, Fragrance.

Lyn Distributing 965 North Redwood Road, North Salt Lake, Utah 84054

Phone 801-295-5022

181

181

Change your hands from greasy grime to clean and conditioned. Use Deep Scrub or Soft Scrub hand cleaners.

DEEP SCRUB WATERLESS HAND CLEANER IS THE PRODUCT OF CHOICE FOR PEOPLE WHO REALLY USE THEIR HANDS. Powerful cleaning agents, odorless solvents, and skin conditioners, along with fine pumice grit work together to quickly remove stubborn grime that ordinary soaps won’t touch-even if there is no water available. The special emollients prevent chapping and redness, and keep hands soft and comfortable even after repeated uses. The most powerful, most practical and most economical way to clean dirty working hands. Place a generous amount of this green gelled hand cleaner on palm, and rub into soiled skin. Be sure to clean thoroughly around cuticles, fingernails, and knuckles. Wipe hands clean and dry with cloth or paper towel, or rinse with water if available. Deep Scrub leaves a nice lime fragrance when used. SOFT SCRUB WATERLESS HAND CLEANER IS THE SAME AS DEEP SCRUB EXCEPT IT DOES NOT CONTAIN FINE PUMICE. Soft Scrub may be used with or without water. Soft Scrub is a white gelled hand cleaner with a nice almond fragrance, this hand cleaner is loaded with skin conditioners.

LYN DISTRIBUTING 965 NO. REDWOOD ROAD, NO. SALT LAKE, UT 84054 PHONE 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

DEEP SCRUB & SOFT SCRUB COME IN A 4.5 LB. CAN - 6 PER CASE. OR 22 OUNCE TUBE FOR EASY DISPENSING ON THE JOB. 12 OR 24 TUBES PER CASE.

182

182

E-2 HAND CLEANER & SANITIZER

"E-2 SANITIZING HAND SOAP IS AUTHORIZED BY THE U.S.D.A.

UNDER CATEGORY E2 FOR SANITIZING HAND SOAPS"

DIRECTIONS: E-2 is recommened for use in food processing plants and restaurants by personal prior to handling food and/or food processing equipment. E-2's formulation effectively reduces bacterial flora of the skin. Hands need not be washed prior to using this product. For one step hand washing and sanitizing, place approximately 5cc in palm of hand, add 15cc of water, lather and wash in normal manner. After use, hands must be thoroughly rinsed with potable water. Repeat whenever re-entering production area. This product must be dispensed from an adequate dispenser located a sufficient distance from the processing line to prevent accidental production contamination. Caution:do not get in eyes. Harmful if swallowed. Avoid contamination of food. Remove and wash contaiminated clothing. In case of contact, immediately flush eyes, call a physician. Remove and wash all contaminated clothing before reuse. If swallowed, drink egg whites or gelatin solution, or if these are not available, drink large quantities of water. Call a physician. Do not contaminate water, food, or feed by storage and disposal. Keep out of reach of children.

.LYN DISTRIBUTING PH. 801- 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022 965 NO. REDWOOD RD. NO. SALT LAKE UTAH 84054

183

183

WATERLESS HAND CLEANER USE WITH OR WITHOUT WATER

Made WITH OR WITHOUT PUMICE

DISSOLVES GREASE, DIRT, GRIME, PAINT AND INKS.

AREAS OF USE PRINTING SHOPS, GARAGES, RUBBER MILLS, TIRE SHOPS,TEXTILE PLANTS, FORKLIFT SHOPS, BLDG. MAINT. SHOPS, BUILDING CONTRACTS, FARMS, DAIRY MAINT. DEPARTMENTS, MEAT PACKING PLANTS MAINT. DEPT. AUTO DEALER SHOPS, TIRE RECAPPING SHOPS, MUFFLER REPAIR SHOPS, COUNTY ROAD SHOPS, CITY ROAD SHOPS, STATE ROAD SHOPS, SCHOOLS, HOTEL-MOTEL BUILDING MAINT. SHOP, GOLF COURSE MAINT. SHOP, SERVICE STATIONS, NATURAL GAS COMPANIES, BUS SHOPS, TRUCK SHOPS, ELECTRIC POWER COMPANIES, AIRPLANE MAINTENANCE SHOPS, SEWAGE TREATMENT PLANTS, WATER DEPARTMENTS. HEAVY EQUIPMENT REPAIR SHOPS.

PRODUCT DESCRIPTION: GRIME BUSTER hand cleaner is a thick lotion type hand cleaner that may be used with or without water. GRIME BUSTER with PUMICE may be used for aggressive scrubbing action. The fine pumice gets into the small cracks and crevices of your hands and scrubs the grime and dirt away. GRIME BUSTER will rinse off clean and leave your hands feeling soft and smooth. GRIME BUSTER quickly cleans and emulsifies soil, grease, paint, oil, tar, and carbon. GRIME BUSTER contains no caustic. GRIME BUSTER contains skin conditioning oils and emollients for extra conditioning.

Direction s for use: Do not wet hands, apply to dry hands and rub into skin until grease and soil have loosened. Rinse clean with water, or wipe off with a clean towel or wiper. If all the grease or grime have not been removed, repeat above directions once again. This product contains a hand bacteria killer. MANUFACTURED BY: LYN DISTRIBUTING SECTION HCL # N1021 & # N1022

965 No.Redwood Rd. No. Salt Lake, Ut. 84054 Phone in Salt Lake Area 801-295-5022 outside Salt Lake Area 800-366-5022

184

184

HAND CLEANER / CONDITIONERIN TUBES FOR ON LOCATION HAND CLEANING!

Lyn Distributing formulates 4 different types of hand cleanersand packages them in convenient to dispense and use 22 oz.

Tubes.

DEEP SCRUB hand cleaner containsfine pumice for deep cleaning. It has apleasant fragrance and will rinse orwipe off your hands leaving handsclean and conditioned.SOFT SCRUB hand cleaner is thesame as DEEP SCRUB less thepumice.

RINO DEEP SCRUB hand cleanercontains all natural citrus extract toclean deeply embedded grease andgrime, yet will wipe clean and leaveyour hands conditioned and fresh.This hand cleaner also contains finepumice for aggressive cleaning.RINO SOFT SCRUB is the same asabove without the pumice.

Lyn Distributing 965 No. Redwood Road No. Salt Lake, Utah. 84054Phone 801-295-5022 Outside Salt Lake Area 1-800-366-5022

Areas of use:Service trucks for equipment dealers.Utility companies line trucks.Farmers & Ranchers in the fields.Sportsmen in the field.Water Dept. service personnel.Fire Departments in the field.Police Departments.Landscaping companies.Service trucks for truck stops.Service trucks for automobile dealers.Towing trucks.Sign painting companies.Fish and Game departments.Asphalt companies.Surveying crews.Concrete companies.Construction companies.

185

185

Hand & Body soap. Ready to use. Gives a very thick, copious lather. Its pH of 8 is very gentle, yet cleans the toughest dirt without drying out the skin. A good shower body shampoo. A very good shampoo for animals such as dogs, horses, cattle, etc. This soap is enhanced with glycerin emollients to provide the ultimate in gentle, effective skin cleaning. This rich, clear hand and body soap may be diluted for further economy. This product is ideal for persons who must wash their hands several times each day as it will condition the skin and not deplete the natural skin oils which provide protection against chapping and cracking. Ready to use but may be diluted up to 1:2 with water. Markets: Airports, bars, cocktail lounges, dairies, food plants, locker rooms, offices, animal pounds, city hall, health spas, factories, hotels, motels, recreation areas, automobile dealerships, commercial launders, fire stations, jails, nursing homes, restaurants, rest rooms, service stations, machine shops, golf courses, airports, and nursing homes. CAUTION: Do not ingest. If this should occur, drink large volumes of water and seek medical attention. Avoid storage of product in freezing temperatures. Keep container sealed when not in use to prevent contamination. Rinse empty container before discarding in an authorized landfill site. KEEP OUT OF REACH OF CHILDREN.

Lyn Distributing 965 North Redwood Road North Salt Lake, Utah 84054 Phone 801-295-5022 www.lyndist.com Outside Salt Lake City Area 1-800-366-5022

Hand & Body Soap Thick Clear Hand & Body Cleaner

With emollients and a pleasant fragrance

186

186

H S Apple Hand Soap

A gentle lotion hand cleaner

with a pleasant

spicy-apple fragrance A gentle lotion hand cleaner with a pleasant apple fragrance. This product is ideal for persons who must wash their hands several times each day as it will condition the skin and not deplete the natural skin oils which provide protection against chapping and cracking. Ready to use but may be diluted up to 1:2 with water. Apple hand soap will quickly and easily remove all soils and greases without irritation to even the most delicate hands. Contains a broad-spectrum bacteriostatic agent for hygienically sound cleaning of hands. Produces a dense creamy lather and contains no free alkali or other irritants. Ingredients: sodium laureth sulfate, sodium lauryl sulfate, cocamidopropyl betaine, fragrance, glycerin, aloe, 1,3-dihydroxymethyl-5,5-dimethylhydantoin: dmdm hydantoin: 1,3-dimethylol-5,5-dimethylhydantoin: 1,3-di(hydroxymethyl)-5,5-dimethyl-2,4-imidazolidinedione.

Markets: Airports, bars, cocktail lounges, dairies, food plants, locker rooms, offices, animal pounds, city hall, health spas, factories, hotels, motels, recreation areas, automobile dealerships, commercial launders, fire stations, jails, nursing homes, restaurants, rest rooms, service stations, machine shops, golf courses, airports, and nursing homes.

KEEP OUT OF REACH OF CHILDREN:

CAUTION: IF SPLASHED IN EYES WASH WITH CLEAR WATER FOR 15 MINUTES. Do not ingest. If this should occur, drink large volumes of water and seek medical attention. Avoid storage of product in freezing

temperatures. Keep container sealed when not in use to prevent contamination. Rinse empty container before discarding in an authorized landfill site

50 ounce cartridge 12/case 1 gallon bottle

6 X 1 gallon per case

6 gallon container w/pour spout 15 gallon drum w/pour spout 55 gallon drum w/pour spout

Lyn Distributing PHONE 1-800-366-5022

965 North Redwood Road, North Salt Lake, Utah 84054 WWW.LYNDIST.COM

187

187

IIINNNDDDUUUSSSTTTRRRIIIAAALLL HHHAAANNNDDD CCCLLLEEEAAANNNEEERRR CITRUS BASED HAND CLEANER

DESCRIPTION A SUPERIOR HAND CLEANER, THIS PRODUCT WILL QUICKLY PENETRATE, DISSOLVE, AND SAFELY REMOVE GREASE AND GRIME WHILE CONDITIONING YOUR SKIN WITH A UNIQUE BLEND OF ESSENTIAL OILS. CLEANS MOST INKS, PAINTS, ADHESIVES, GREASE, OILS, TARS, AND

RESINS FROM WORKING HANDS. THIS HAND CLEANER IS FORMULATED WITH SURFACTANTS, CITRUS OILS, AND HAS A CONTROLLED pH. THIS HAND CLEANER WORKS WELL WITH OR WITH OUT WATER. THIS HAND CLEANER HAS A PLEASANT SCENT AND A RICH COSMETIC CREAM CON- SISTENCY.

DIRECTIONS FOR USE: DISPENSE 1/2 oz. INTO THE PALM OF YOUR HAND, WORK INTO THE GRIME UNTIL GRIME HAS BECOME LIQUIFIED. THEN RINSE WITH WATER. IF NO WATER IS AVAILABLE THEN WIPE OFF HANDS WITH A WIPER OR TOWEL.

MANUFACTURED BY LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE CITY, UTAH 84054

PHONE IN SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 800-366-5022

ADVANTAGES CITRUS OIL BASE PLEASANT FRAGRANCE NO PETROLEUM SOLVENTS CONTAINS SKIN CONDITIONERS USE WITH OR WITHOUT WATER QUICK CLEANING ACTION WILL NOT CLOG DRAINS MAY BE DILUTED FOR ECONOMY CONTAINS NO ABRASIVES

188

188

MHS-101 Moisturizing Hand Scrub W/ Pumice

#N3001-1 Features: Waterless Hand Cleaner Cleans and Condit ions Skin Contains Pumice Description: This highly effective waterless hand cleaner has been formulated using hard working surfactants, mild solvents, a blend of skin

conditioning emollients and is fortified with scrubbing pumice particles for additional cleaning power. This product will clean the most stubborn soils from hands while skin conditioners protect hands from irritation and chapping. Ready to use.

Markets: Airports, bars, cocktail lounges, dairies, food plants, locker rooms, offices, animal pounds, jails, nursing homes, city hall,

restaurants, hotels, motels, commercial launders, machine shops, fire stations, health spas, factories, rest rooms, recreation areas, automobile dealerships, service stations.

Demonstrations: 1. Soil your hands with the grease and then add some MHS-101 to your hands. 2. Work up into a lather and then wipe hands clean with the paper towels, showing how the well the product removed some very difficult grease. Note the conditioning properties of product. 3. Explain to the customer that the product can be rinsed with water if desired. Notes:

Manufactured by: LYN DISTRIBUTING 965 NO. REDWOOD ROAD, NO. SALT LAKE, UTAH PHONE 295-5022 IN SALT LAKE AREA PHONE 1-800-366-5022 OUTSIDE SALT LAKE AREA

189

189

#N3000-1 MOISTURIZING SKIN CLEANER

Features: Moisturizing Hand Cleaner - Cleans and Conditions Skin - may beused with or without water!Cherry Fragrance

Description: This highly effective waterless hand cleaner has been formulated using hardworking surfactants, mild solvents and a superior blend of skin conditioners. Thisproduct will clean the most stubborn soils while softening and conditioning theskin. Product works equally well when used with water if desired. Ready to use.

Markets: Airports, auto rental shops, food plants, city vehicle shops, animal pounds, jails,nursing homes maintenance area, city hall maintenance area, hotel maintenancearea, machine shops, fire stations, concrete company maintenance shops, asphaltplants, factories, rest rooms, recreation vehicle maintenance shop, automobiledealerships, service stations.

Demonstrations: Obtain some dirty, used grease, and some paper towels.

1. Soil your hands with the grease and then add some MSC-100 to your hands.2. Work until grime is loose, then wipe hands clean with the paper towels,

showing how the well the product removed some very difficult grease. Notethe conditioning properties of product.

3. Explain to the customer that the product can be rinsed with water if desired.

LYN DISTRIBUTING 965 NORTH REDWOOD ROADNORTH SALT LAKE, UTAH 84054PHONE IN SALT LAKE AREA 295-5022OUTSIDE SALT LAKE AREA 1-800-366-5022

190

190

This all purpose luxury hand and body cleaner is a new alternative forpersonal cleansing. Its versatility and, potential are unlimited - it can be used as ahand cleaner, a body bath, and is an excellent product for use in the shower.

Wet the hands or body and apply thick pearlescent cleaner. It lathers to excellentfoam even in hard water, and rinses easily leaving the skin feeling good. It has asubtle, country fresh citrus fragrance.

This product is based on a synthetic detergent system; it is acid balanced formildness and special emollients minimize cold-weather skin drying. This productcontains a broad spectrum bacteria and fungi growth inhibitor. Pink Pearl inhibitsthe growth of gram positive and gram negative bacteria as well as yeasts andmolds.

Use in athletic showering/bathing facilities, industrial plant locker rooms, and indispensing, systems for large buildings.

Available in: 1 gallon bottles 6 per case, 30-gallon drums, and 55 gallon drums.

Ingredients: Water, Sodium olefin sulfonate, Lauramide DEA, Sodium Chloride, Glycerin,Glycol Stearate, Preservative, Citric Acid, Fragrance, & Dye.

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD NO. SALT LAKE, UT.84054PHONE IN SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

ALL PURPOSE HAND SOAPALL PURPOSE HAND SOAP

191

191

PRODUCT DESCRIPTION An extraordinary product not available in shampoos in the retail market. A uniquely blended product that combines the desirable quality of a fantastic full-bodied shampoo with an effective cleaning and rinsing shower soap. • Protein enriched to refresh the hair and skin.

• Full-bodied, creamy lather for both hair and body.

• pH balanced for gentleness and nonstripping of hair.

• Broad range of cleaning and conditioning agents. • Contains bacteria and fungi killing agent.

DIRECTIONS FOR HAIR Pour a small amount (about the size of a 50-cent piece) into the palm of your hand. Wet hair, and rinse free. FOR BODY Pour the same amount on a washcloth and spread the lather over the skin. Rinse free. This is a very mild cleaner that is free rinsing. Available in almond, coconut, pina cola, and cinnamon fragrance.

LYN DISTRIBUTING 965 NO. REDWOOD ROAD, NO. SALT LAKE, UT. 84054 PHONE - SALT LAKE AREA 295-522 OUTSIDE SALT LAKE AREA 1-800-366-5022

192

192

This remarkable pink powdered hand cleaner is especially formulated from selected mild scrubbers, quality vegetabe oil soaps, skin emollients and an exclusive cooling agent. This unique combination of ingredients cleans hands thoroughly yet is very mild. It removes tough soils, even ink. This product can be applied for plant or office use. Although powerful, this cleaner’s fine scrubbers will not abrade or irritate the skin. The high percentage of vegetable oil soap is relied upon to remove skin soils. The gentle scrubbers in the formula produce a “washcloth” action to remove inbedded soils rather than taking off layers of skin. This prodcut contains no harsh abrasives such as silica or pumice. Irritated skin is especially susceptabel to dermatitis. This product contains lanolin. Prolonged use of nearly any skin cleaner will deplete naural oils. The skin emollients replenish oils lost in the washing process and thus prevent chapping and drying of the skin. This product also contains an exclusive cooling agent. This special organic material creates a cooling dffect on hands and assists in cleaning. This agent also helps to leave skin soft and supple. This powder is light and fluffy in appearance. In fact, it is 20% lighter per unit volume than most powdered hand soaps. Thus, since these products are generally dispensed by volume, not weight, it is very economical to use.

NOTE THESE FEATURES! •• EASY ON HANDS •• CONTAINS NO FILLERS •• 100% ACTIVE •• QUICK RINSING •• WILL NOT CLOG PLUMBING •• PLEASANT SCENTED •• USE HOT OR COLD WATER. DIRECTIONS FOR USE: Wet hands and add powder, working up lather by rubbing hands together. Add more water washing arms and in and around fingernails and knuckles. Rinse under running water and towel or air dry. Repeat often to keep hands clean and sanitary. Packaged in: 6 each 5 pound bottles per case, 100 pound drum, 300 pound drum

MANUFACTURED BY LYN DISTRIBUTING

965 NO. REDWOOD ROAD NO. SALT LAKE CITY, UTAH 84054 PHONE IN SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 800-366-5022

• BORATED Powdered Hand Cleaner

• Cleans Better • Easy on Hands • Free Flowing

193

193

This remarkable tan powdered hand cleaner is especially formulated from selected mild scrubbers, quality vegetabe oil soaps, skin emollients and an exclusive cooling agent. This unique combination of ingredients cleans hands thoroughly yet is very mild. It removes tough soils, even ink. This product is primarily designed for plant use and will effectively clean very dirty greasy hands.. Although powerful, this cleaner’s fine scrubbers will not abrade or irritate the skin. The high percentage of vegetable oil soap is relied upon to remove skin soils. The gentle scrubbers in the formula produce a “washcloth” action to remove inbedded soils rather than taking off layers of skin. This prodcut contains no harsh abrasives such as silica or pumice. Irritated skin is especially susceptabel to dermatitis. This product contains lanolin. Prolonged use of nearly any skin cleaner will deplete naural oils. The skin emollients replenish oils lost in the washing process and thus prevent chapping and drying of the skin. This product also contains an exclusive cooling agent. This special organic material creates a cooling dffect on hands and assists in cleaning. This agent also helps to leave skin soft and supple. This powder is light and fluffy in appearance. In fact, it is 35% lighter per unit volume than most powdered hand soaps. Thus, since these products are generally dispensed by volume, not weight, it is very economical to use.

NOTE THESE FEATURES! •• EASY ON HANDS •• CONTAINS NO FILLERS •• 100% ACTIVE •• QUICK RINSING •• WILL NOT CLOG PLUMBING •• PLEASANT SCENTED •• USE HOT OR COLD WATER. DIRECTIONS FOR USE: Wet hands and add powder, working up lather by rubbing hands together. Add more water washing arms and in and around fingernails and knuckles. Rinse under running water and towel or air dry. Repeat often to keep hands clean and sanitary. Packaged in: 6 each 4 pound bottles per case, 100 pound drum, 200 pound drum

MANUFACTURED BY LYN DISTRIBUTING

965 NO. REDWOOD ROAD NO. SALT LAKE CITY, UTAH 84054 PHONE IN SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 800-366-5022

• Powdered Hand Cleaner • Cleans Better • Easy on Hands • Free Flowing

194

194

RINO EXTRA H.D.RINO EXTRA H.D. hand cleaner quickly removes tough grime with natural orangeextracts! This hand cleaner contains no petroleum solvents. RINO EXTRA H.D. contains amild grit to remove the stubborn grime that ordinary soaps won't touch - even when there is nowater available. This premium formula is fortified with lanolin and other skin emollients to helpprevent chapping and irritation, and keeps hands feeling soft and comfortable. The mostpowerful, most practical most economical way to clean working hands.

RINO EXTRA H.D.RINO EXTRA H.D. CONTAINS SPECIAL DETERGENTS AND NATURAL CITRUSSOLVENTS TO DISSOLVE THE TOUGHEST GRIME, OIL, TAR, MARKER INK,GEAR LUBES AND GREASES. RINO EXTRA H.D.RINO EXTRA H.D. CONTAINS SKINCONDITIONERS TO KEEP SKIN SOFT AND SOOTHED.

DIRECTIONS: DIRECTIONS: PLACE A GENEROUS AMOUNT OF THIS WATERLESS HANDCLEANER ON PALM, AND RUB INTO SOILED SKIN. BE SURE TO CLEANTHOROUGHLY AROUND CUTICLES, FINGERNAILS, AND KNUCKLES. WIPEHANDS CLEAN AND DRY WITH CLOTH OR PAPER TOWEL, OR RINSE WITHWATER AND WIPE DRY WITH PAPER TOWEL. COMPARE THIS WITH THEHAND CLEANER YOU ARE PRESENTLY USING, YOU WILL SEE THEDIFFERENCE.

LYN DISTRIBUTINGLYN DISTRIBUTING965 NO. REDWOOD ROAD, NO. SALT LAKE, UTAH 84054PHONEPHONE 801 - 295-5022 IN SALT LAKE AREA OUTSIDE SALT LAKE AREA 1-800-366-5022

195

195

RINO CITRUSRINO CITRUS HAND CLEANER QUICKLY REMOVES TOUGH GRIME WITHNATURAL ORANGE EXTRACTS! THIS HAND CLEANER CONTAINS NOPETROLEUM SOLVENTS. RINO CITRUS RINO CITRUS CONTAINS A MILD GRIT TO REMOVETHE STUBBORN GRIME THAT ORDINARY SOAPS WON'T TOUCH - EVEN WHENTHERE IS NO WATER AVAILABLE. THIS PREMIUM FORMULA IS FORTIFIEDWITH LANOLIN AND OTHER SKIN EMOLLIENTS TO HELP PREVENT CHAPPINGAND IRRITATION, AND KEEPS HANDS FEELING SOFT AND COMFORTABLE.THE MOST POWERFUL, MOST PRACTICAL MOST ECONOMICAL WAY TO CLEANWORKING HANDS.

RINO CITRUSRINO CITRUS CONTAINS SPECIAL DETERGENTS AND NATURAL CITRUSSOLVENTS TO DISSOLVE THE TOUGHEST GRIME, OIL, TAR, MARKER INK,GEAR LUBES AND GREASES. RINO CITRUSRINO CITRUS CONTAINS SKIN CONDITIONERSTO KEEP SKIN SOFT AND SOOTHED.

DIRECTIONS: DIRECTIONS: PLACE A GENEROUS AMOUNT OF THIS WATERLESS HANDCLEANER ON PALM, AND RUB INTO SOILED SKIN. BE SURE TO CLEANTHOROUGHLY AROUND CUTICLES, FINGERNAILS, AND KNUCKLES. WIPEHANDS CLEAN AND DRY WITH CLOTH OR PAPER TOWEL, OR RINSE WITHWATER AND WIPE DRY WITH PAPER TOWEL. COMPARE THIS WITH THEHAND CLEANER YOU ARE PRESENTLY USING, YOU WILL SEE THEDIFFERENCE.

LYN DISTRIBUTINGLYN DISTRIBUTING965 NO. REDWOOD ROAD, NO. SALT LAKE, UTAH 84054PHONEPHONE 801 - 295-5022 IN SALT LAKE AREA OUTSIDE SALT LAKE AREA 1-800-366-5022

RINO CITRUSHAND CLEANER

WITH ORWITHOUTPUMICE

196

196

This all purpose luxury hand and body cleaner is a new alternative forpersonal cleansing. Its versatility and, potential are unlimited - it can be used asa hand cleaner, a body bath, and is an excellent product for use in the shower.

Wet the hands or body and apply thick pearlescent cleaner. It lathers to excellentfoam even in hard water, and rinses easily leaving the skin feeling good. It has asubtle, country fresh floral fragrance.

This product is based on a synthetic detergent system; it is acid balanced formildness and special emollients minimize cold-weather skin drying. This productcontains a broad spectrum bacteria and fungi growth inhibitor. Sani Softyinhibits the growth of gram positive and gram negative bacteria as well as yeastsand molds.

Use in athletic showering/bathing facilities, industrial plant locker rooms, and indispensing, systems for large buildings.

Available in: 1 gallon bottles 6 per case, 30-gallon drums, and 55 gallon drums.

Ingredients: Water, Sodium olefin sulfonate, Lauramide DEA, Ammonium Chloride, Glycerin,Glycol Stearate, Preservative, Citric Acid, Fragrance, & Dye.

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD NO. SALT LAKE, UT.84054PHONE IN SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

ALL PURPOSE HAND & BODYALL PURPOSE HAND & BODYSOAPSOAP

197

197

Specifications: Each SCRUBS® bucket contains 72 - 10.5" x

12.25" perforated high strength absorbent cleaning towels.

6 Buckets per Case

When hands are really soiled, and there isn't any soap... and there isn't any water... regardless of place, time or location... no

matter what the soils are.

What are they? How do they work? Rough Touch® SCRUBS are a unique patented waterless hand-cleaning system combining both a high quality, liquid hand cleaner formula, and a heavy-duty, non-scratching, abrasive hand-cleaning towel. Who uses SCRUBS®? And where? Rough Touch® SCRUBS are essential for mechanics, painters, printers, silk screeners, machinists, glaziers, plumbers, and many more.

Lyn Distributing 965 North Redwood Road North Salt Lake, Utah 84054 Phone 801-295-5022 Out Side of Salt Lake Area 1-800-366-5022

Web Address www.lyndist.com

198

198

SPICY APPLE Hand Soap A gentle lotion hand cleaner

with a pleasant spicy-apple fragrance.

CAUTION: IF SPLASHED IN EYES WASH WITH CLEAR WATER FOR 15 MINUTES. Do not ingest. If this should occur, drink large

volumes of water and seek medical attention. Avoid storage of product in freezing temperatures. Keep container sealed when not

in use to prevent contamination. Rinse empty container before discarding in an authorized landfill site

PACKAGING SIZES: 50 ounce cartridge 12/case

1 gallon bottle 6 X 1 gallon case

6 gallon container w/pour spout 15 gallon drum w/pour spout 55 gallon drum w/pour spout

This mild cleaner may be used as a shampoo or a mild hand cleaner. Works great in Health SPAS, on the counter in office

restrooms, or a mild lotion soap by sinks A gentle lotion hand cleaner with a pleasant spicy apple fragrance. This product is ideal for persons who must wash their hands several times each day as it will condition the skin and not deplete the natural skin oils which provide protection against chapping and cracking. Ready to use but may be diluted up to 1 to 2 with water. Spicy Apple hand soap will quickly and easily remove all soils and greases without irritation to even the most delicate hands. Contains a broad-spectrum bacteriostatic agent for hygienically sound cleaning of hands. Produces a dense creamy lather and contains no free alkali or other irritants. Ingredients: sodium laureth sulfate, sodium lauryl sulfate, fragrance, glycerin, aloe, 1,3-dihydroxymethyl-5,5-dimethylhydantoin: dmdm hydantoin: 1,3-dimethylol-5,5-dimethylhydantoin: 1,3-di(hydroxymethyl)-5,5-dimethyl-2,4-imidazolidinedione.

KEEP OUT OF REACH OF CHILDREN:

Lyn Distributing PHONE 1-800-366-5022 965 North Redwood Road, North Salt Lake, Utah 84054

199

199

PRODUCT DESCRIPTION: WH-77 hand cleaner is a thick lotion type hand cleaner that may be used with or without water. WH-77 with PUMICE may be used for aggressive scrubbing action. The fine pumice gets into the small cracks and crevices of your hands and scrubs the grime and dirt away. WH-77 will rinse off clean and leave your hands feeling soft and smooth. WH-77 quickly cleans and emulsifies soil, grease, paint, oil, tar, and carbon. WH-77 contains no caustic. WH-77 contains skin conditioning oils and emollients for extra conditioning.

Direction s for use: Do not wet hands, apply to dry hands and rub into skin until grease and soil have loosened. Rinse clean with water, or wipe off with a clean towel or wiper. If all the grease or grime have not been removed, repeat above directions once again. This product contains a hand bacteria killer

LOTIONIZED WATERLESS HAND

CLEANER USE WITH OR WITHOUT WATER

Made WITH OR WITHOUT PUMICE

DISSOLVES GREASE, DIRT,GRIME, PAINT AND INKS


MANUFACTURED BY: LYN DISTRIBUTING SECTION HCL #N1005 & N1006 965 No.Redwood Rd. No. Salt Lake, Ut. 84054 Phone in Salt Lake Area 801-295-5022 outside Salt Lake Area 800-366-5022

200

200

PRODUCT DESCRIPTION: WH-77 hand cleaner is a thick lotion type hand cleaner that may be used with or without water. WH-77 with PUMICE may be used for aggressive scrubbing action. The fine pumice gets into the small cracks and crevices of your hands and scrubs the grime and dirt away. WH-77 will rinse off clean and leave your hands feeling soft and smooth. WH-77 quickly cleans and emulsifies soil, grease, paint, oil, tar, and carbon. WH-77 contains no caustic. WH-77 contains skin conditioning oils and emollients for extra conditioning.

Direction s for use: Do not wet hands, apply to dry hands and rub into skin until grease and soil have loosened. Rinse clean with water, or wipe off with a clean towel or wiper. If all the grease or grime have not been removed, repeat above directions once again. This product contains a hand bacteria killer

LOTIONIZED WATERLESS HAND

CLEANER SOY BASED USE WITH OR WITHOUT WATER

Made WITH OR WITHOUT PUMICE DISSOLVES GREASE, DIRT, GRIME. THIS IS A EXTRA

STRENGTH HAND CLEANER


MANUFACTURED BY: LYN DISTRIBUTING SECTION HCL #N1005S & N1006S

965 No.Redwood Rd. No. Salt Lake, Ut. 84054 Phone in Salt Lake Area 801-295-5022 Outside Salt Lake Area 800-366-5022 Email [email protected] Web site http://www.lyndist.com

201

201

Hard working people need a heavy duty skin conditioner and moisturizer toprotect and rehydrate the skin when skin is damaged from heavy duty cleaners orproducts that can dry skin and take the moisture out of the skin. WORKINGHANDS LOTION was develop with extremely high levels of skin moisturizers torevitalize the skin when skin damage has occurred. WORKING HANDSLOTION may be used every day to condition the skin and help maintain thesuppleness and softness of the skin. When using this product you will use less thannormal lotions because of the high levels of moisturizers this product contains.When skin is exposed to heavy duty cleaners and your skin is drying out useWORKING HANDS to revitalize your skin. “YOU WILL BE AMAZED AT THEABILITY OF THIS PRODUCT TO REHYDRATE SKIN”

Packaged in: PINTS 12 OR 24 PER CASE, QUARTS 12 OR 24 PER CASE, GALLONBOTTLES 6 PER CASE. 15 OR 30 GALLON DRUMS FOR DISPENSER REFILLING.

MANUFACTURED BY LYN DISTRIBUTING965 NO. REDWOOD ROAD NO. SALT LAKE CITY, UTAH 84054PHONE IN SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 800-366-5022

• CONTAINS SEVERAL SKINCONDITIONERS

• REPLENISHES MOISTURE IN SKIN• PROVIDES A HIGH LEVEL OF

ANTIMICROBIAL ACTIVITY• SEALS IN MOISTURE TO HEAL

SKIN

202

202

Absorbent Pads

All types of absorbent pads, hazmat pads, absorbent rolls, hazmat absorbent pads, grey absorbent pads for universal use, blue absorbent pads for oil , white absorbent pads for oil, and yellow

absorbent pads for caustic or acid. Multi Laminate technology produces a super-strong, heavy-weight mat or absorbent pad for rugged applications. Outer spun-bond layers constructed of continuous strands of interwoven polypropylene fibers provide toughness while the Melt Blown inner layer draws and traps ugly grime inside. Resistant to tears and abrasions, this mat or absorbent pad is perfect for lining tool cribs and placing under jagged parts and heavy equipment. Up-to-date technology means finding the finest materials and then blending them together in unique ways to ensure high absorbency and durability. For example, by ultrasonically sandwiching a layer of Melt Blown polypropylene between two Multi Laminated layers, our absorbent mat or absorbent pads becomes virtually indestructible to foot traffic. Therefore, it stays on the job longer and saves everyone money.

Universal Grey absorbent pads (Medium -Weight),19" x 15", 100/bundle

Grips the Floor for Safety Top and bottom layers of Fine Fiber are built of densely-woven, small-diameter strands of fiber to increase

surface area — enabling the Mat to grip the floor and secure it for safer walking. Universal application for oil, coolants, solvents and water. Virtually Indestructible Fine Fiber Mat has a layer of Melt Blown polypropylene

ultrasonically sandwiched between two Fine Fiber layers. Sonic-bonded "Dimples" add fast-wicking power and strength. 3-ply construction gives Mat durability to resist heavy foot traffic for longer wear and fewer change

outs. Absorbs 20.8 gal. per package

Absorbent pads Grey Universal,

Heavy -Weight, 15 inch x 19 inch 100 per bundle Grey Absorbent pads Universal, Multi Laminate technology produces a super-strong, heavy-weight mat or

absorbent pad for rugged applications. Outer spun-bond layers constructed of continuous strands of interwoven polypropylene fibers provide toughness while the Melt Blown inner layer draws and traps ugly grime inside. Resistant to tears and abrasions, this absorbent mat, absorbent pad is perfect for lining tool cribs and placing

under jagged parts and heavy equipment. Universal Grey absorbent pads 100 per bundle, HEAVY weight pads, absorbs 30 gallons per bundle. Lay out our absorbent mats throughout your facility to help absorb leaks and

spills from oils, coolants, solvents, water and even hazardous materials. LYN DISTRIBUTING

965 NO. REDWOOD ROAD NO. SALT LAKE, UTAH PHONE 801-295-5022 OUT SIDE SALT LAKE AREA 1-800-366-5022

203

203

Absorbent pads Grey Universal,

Heavy -Weight, 17 inch x 19 inch 100 per Box Absorbent pads Grey Universal, 100 per box. Multi Laminate technology produces a super-strong, heavy-

weight mat or absorbent pad for rugged applications. Outer spun-bond layers constructed of continuous strands of interwoven polypropylene fibers provide toughness while the Melt Blown inner layer draws and traps ugly grime inside. Resistant to tears and abrasions, this absorbent mat, absorbent pad is perfect for lining tool cribs and placing under jagged parts and heavy equipment. Universal Grey absorbent pads 100 per box, HEAVY

weight pads, absorb 30 gallons per bundle. Lay out our absorbent mats throughout your facility to help absorb leaks and spills from oils, coolants, solvents, water and even hazardous materials.

Universal Grey Absorbent Pads Air Laid

100 pads per package GPA100H Heavy Weight Universal Air Laid Grey Absorbent pads 100 pads per package. Absorbs up to 31.1 gallon per package. Absorbs up to 40.06 ounces per pad 19 inches Length x 15 inches Wide. Resilient, bounce-back polypropylene fibers are Air Laid between two layers of tough SpunBond making this an ideal for tight spots, wrapping pipes and other

equipment, wiping down machinery or just tucking in your back pocket. High Sorbency Stays on the Job Longer. Inner layer of air-filled polypropylene fibers creates uniform pockets of air that attract and hold liquids.

Drum Top Pads Grey Universal 25 pads per package Absorbs up to 8.6 gallons per package Absorbs up to 44 ounces per pad Ext. diameter 22 inches. Absorbs oil, water, antifreeze, brake fluid, brake cleaner, and most

liquids.

204

204

Universal Grey Fine Fiber Absorbent Mat or Roll, 150 feet long x 30 inches wide Heavy Weight Universal Fine Fiber Mat Roll grips the floor and absorbs oils, coolants, solvents and water where you walk to

keep floors dry and safe. Top and bottom layers of Fine Fiber are built of densely woven, small diameter strands of fiber to increase surface area enabling the Mat to grip the floor and secure it for safer walking. Universal application for oil, coolants, solvents and water. Fine Fiber Mat has a layer of Melt Blown polypropylene

ultrasonically sandwiched between two Fine Fiber layers. Sonic-bonded dimples add fast wicking power and strength. 3 ply construction gives Mat durability to resist heavy foot traffic for longer wear and fewer change

outs. Color coding helps you visually identify the right sorbent for your needs. Gray signifies Universal sorbency. Large-diameter MeltBlown polypropylene fibers create a high-loft inner layer that absorbs high

volumes of liquid fast. Heavy Weight construction offers the greatest sorbency. Absorbs 49 gallons of liquid per roll.

Rag Rug absorbent for universal absorbency 150 feet x 36 inches wide.

This Rag Rug Mat is made from recycled polypropylene and acrylic fibers, making it a great choice for use in rugged areas where steady foot traffic might wear out an ordinary mat or rug that's become soaked with over spray. Dark Color Hides Grime. Dark-colored Mat absorbs the grunge from oil, coolants, solvents and water

without looking dirty. Lasts Longer, so You Use and Spend Less. Because this durable Mat stands up to traffic abuse longer than regular mat, you can use it longer, which saves you money! Tough Rug Stands Up to

Punishment. Absorbency Up to 84.6 gallon per roll, roll size is 150 feet long 36 inches wide.

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE, UTAH

PHONE 801-295-5022 OUT SIDE SALT LAKE AREA 1-800-366-5022

205

205

Bonded Oil Only White absorbent pads (Heavy-Weight), 19" x 15", 100/bundle

White Absorbent Pads Oil Only 100 per Bundle 17 inch X 19 inch HEAVY WEIGHT. Eight layers of 100% polypropylene are thermally bonded to make pad the strongest pad on the market; won't rip, tear or fray even when saturated Exclusive dimple pattern speeds wicking of liquid throughout pad for faster, easier cleanup.

Highly absorbent, fine-fiber construction won't leave behind liquids or fiber residue. Absorbs and retains oils and oil-based liquids including lubricants and fuels without absorbing a drop of water. Floats on water to clean up oil spills on water. Bright white color makes absorbed oil easier to see; draws attention to machine leaks and clearly shows saturation level during spill response. Heavy-weight construction is highly durable and absorbent for demanding tasks and large-volume cleanups. Perforated pad is easy to tear to size so you only use what you

need. Pads are ideal for catching drips and soaking up spills. Can be wrung out and incinerated after use to reduce waste or for fuels blending.

Oil-Only White Absorbent Pillows 10 per case, 18" x 18" each

Use Oil-Only White Absorbent Pillows to absorb high-volume leaks and spills of oil and other petroleum-based liquids on land or water. Polypropylene filler is left in its natural hydrophobic state, repels water (and floats)

while only absorbing oils and other hydrocarbons. 10 EACH pillow per case. 18 inches x 18 inches each. White Absorbent Pillows are easy to place in hard-to-reach areas, use under machines and leaky hydraulic hoses or

wedge in corners cramped for space. 100% Post-Industrial Recycled Polypropylene Filler. Holds up to 29 gallons of oily liquid per case. Color-coding helps you visually identify the right sorbent for your needs. Bright

white designates Oil Only sorbency for oil and other petroleum-based fluids, but not water, makes it easy to identify when saturated.



206

206

Oil-Only White Absorbent Pillows 40 per case, 10" x 10" each

Use Oil-Only White Absorbent Pillows to absorb high-volume leaks and spills of oil and other petroleum-based

liquids on land or water. Polypropylene filler is left in its natural hydrophobic state, repels water (and floats) while only absorbing oils and other hydrocarbons. 40 each pillows per case. 10" x 10" each. White Absorbent

Pillows are easy to place in hard-to-reach areas, use under machines and leaky hydraulic hoses or wedge in corners cramped for space. 100% Post-Industrial Recycled Polypropylene Filler. Holds up to 34 gallons of oily

liquid per case. Color-coding helps you visually identify the right sorbent for your needs. Bright white designates Oil Only sorbency for oil and other petroleum-based fluids, but not water, makes it easy to identify

when saturated.

Bonded Oil Only Blue absorbent pads (Heavy-Weight), 19" x 15", 100/bundle

Blue Absorbent Pads Oil Only 100 per Bundle 17 inch X 19 inch HEAVY WEIGHT. Eight layers of 100% polypropylene are thermally bonded to make pad the strongest pad on the market; won't rip, tear or fray even when saturated Exclusive dimple pattern speeds wicking of liquid throughout pad for faster, easier cleanup.

Highly absorbent, fine-fiber construction won't leave behind liquids or fiber residue. Absorbs and retains oils and oil-based liquids including lubricants and fuels without absorbing a drop of water. Floats on water to clean

up oil spills on water. Heavy-weight construction is highly durable and absorbent for demanding tasks and large-volume cleanups. Perforated pad is easy to tear to size so you only use what you need. Pads are ideal for catching drips and soaking up spills. Can be wrung out and incinerated after use to reduce waste or for fuels

blending.

Drum Top Pads Blue Oil Only 25 pads per package Absorbs up to 8.6 gallons per package Absorbs up to 44 ounces per pad Ext. diameter 22 inches. Absorbs oil only, or petroleum based products no water.

207

207

White Absorbent Roll Oil Only 150 feet long x 30 inches wide WRF150H

White absorbent roll, Oil-Only Fine Fiber Mat Roll repels water and quickly absorbs oily spills or over spray. High Sorbency Keeps it on the Job Longer, Fine Fiber Oil-Only Mat is naturally water-resistant (hydrophobic). A random

assembly of large-diameter Melt Blown poly fibers creates a lofty inner layer that absorbs high volumes of oil but not water fast. Low-profile sorbent can be used wherever you need to catch oil leaks, spills or over spray. Heavy Weight

construction offers the greatest sorbency. Grips Surfaces Tightly Top and bottom layers of FineFiber are built of densely-woven, small-diameter strands of fiber to increase surface area, enabling the mat to grip surfaces securely.

Yellow Absorbent Pads Acid, Alkali or Caustic liquid 19” x 15”

100 percent polypropylene Mat quickly absorbs nearly any type of caustic, hazardous or unknown liquids including acids, bases, solvents and chemicals. Color-coded Safety Yellow for fast identification; know exactly what you are reaching for in an emergency spill situation. Fast-Acting for Quick Response. Top and bottom layers of Fine Fiber are built of densely-

woven, small-diameter strands of fiber to increase surface area enabling the Mat to quickly soak up liquids on contact before they can spread. A random assembly of large-diameter Melt Blown polypropylene fibers creates a high-loft inner

layer that absorbs high volumes of liquid fast. Heavy Weight construction offers the greatest sorbency. Virtually Indestructible Fine Fiber Mat has a layer of Melt Blown polypropylene ultrasonically sandwiched between two Fine Fiber

layers. Sonic-bonded Dimples add fast-wicking power and strength. 3-ply construction gives Mat durability. 19" x 15", 100/case

Yellow Absorbent Roll Acid, Alkali or Caustic liquid 150’ long x 30” wide #YRF150H

Yellow Absorbent Roll Acid and Alkali or Caustic liquid 150 feet long x 30 inches wide. When hazardous liquids spill, use Haz Mat Sorbents for quick, efficient response. These polypropylene Melt Blown Mat Pads soak up acids, bases and unknown fluids fast.100% polypropylene Mat quickly absorbs nearly any type of caustic, hazardous or unknown liquid including acids, bases, solvents and chemicals. Color-coded Safety Yellow for fast identification; know exactly what

you're reaching for in an emergency spill situation. Fast-Acting for Quick Response, A layer of MeltBlown polypropylene creates high surface area that enables SonicBonded Mat to quickly soak up liquids on contact before they can spread. High Absorbency, A random assembly of large-diameter MeltBlown poly fibers creates a lofty layer that absorbs high

volumes of liquid fast. LYN DISTRIBUTING

965 NO. REDWOOD ROAD NO. SALT LAKE, UTAH PHONE 801-295-5022

208

208

SPILL SORBENT MATERIAL

PRODUCT # LY 687-10 Size: 22” Diameter 25 pads per case Perfect for any business that stores 55 gallon drums. These non-selective pads are made from 100% post consumer textile fibers. Multi-color design hides ugly drips and leaks; fire retardant for added safety

PRODUCT # LY 691-10

Size: 3/8” X 17” X 19” 100 pads per case

Melt-blown polypropylene pads used for absorbing petroleum based liquids

off land or water. These hydrophobic pads absorb up to 25 times their own weight.

These pads can be used in the industrial sector under and around machinery.

PRODUCT # LY 693-10 SINGLE BOOMS Size: 5” X 10’ 4 per case These melt-blown polypropylene booms can be linked together to form any length required for containing and absorbing oil spills. They are specifically designed to be virtually lint free on the water. PRODUCT # LY 696-10 Size: 36” X 150’ (1 roll) Made from 100% post consumer recycled fibers that absorbs all non-aggressive liquids. Keeps work area safe by absorbing leaks, drips and sprays. Virtually dust-free and fire retardant. Extremely durable and will hold up to forklift traffic.

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD NORTH SALT LAKE, UTAH 84054 PHONE (801) 295-5022 OUT SIDE SALT LAKE AREA PHONE (800) 366-5022

209

209

Universal Grey absorbent pads (Medium -Weight),18" x 18", 100/case #E701570-10 Multi Laminate technology produces a super-strong, heavy-weight absorbent mat, absorbent roll or pad for rugged applications. Outer spun-bond layers constructed of continuous strands of interwoven polypropylene fibers provide toughness while the Melt Blown inner layer draws and traps ugly grime inside. Absorbent rolls or absorbent mats are resistant to tears and abrasions, this absorbent mat or pad is perfect for lining tool cribs and placing under jagged parts and heavy equipment.

Universal Grey Absorbent Rolls Heavy Weight Roll Size is 30" X 150' #LY697-10

Bonded Oil Only White absorbent pads (Heavy-Weight), 18" x 18", 100/case PRODUCT # LY 691-10

For Oil, White Absorbent Rolls Heavy Weight Roll Size is 30" X 150' #ARWRF150H-10

Bonded Oil Only Blue absorbent pads (Heavy-Weight), 18" x 18", 100/case #AP11115-10 Up-to-date technology means finding the finest materials and then blending them together in unique ways to ensure high absorbency and durability in a absorbent roll. For example, by ultrasonically sandwiching a layer of Melt Blown polypropylene between two Multi Laminated layers, our absorbent rolls, absorbent mats or absorbent pads becomes virtually indestructible to foot traffic. These multi laminated absorbent rolls stays on the job longer and saves everyone money.

For Oil, Blue Absorbent Rolls Heavy Weight Roll Size is 30" X 150' #AR15150-10

When hazardous or unknown liquids spill, use our Yellow absorbent pads (Heavy-Weight), 18" x 18", 100/case # AP50101-10 Yellow Hazardous Heavy Weight Acids & Caustic Absorbent Rolls Roll Size is 30" X 150' Fine Fiber Material #ARYRB150H-10 LYN DISTRIBUTING 965 No. Redwood Road No, Salt Lake, Utah 84054 Phone in Salt Lake Area 295-5022 Out Side Salt Lake Area 1-800-366-5022

Grey, White, and Blue Absorbent Rolls are Multi Laminate Technology. Durable long lasting absorbent rolls or absorbent mats.

210

210

#WPIL1818 Oil-Only Absorbent Pillows 10 per case, 18" x 18" Use Absorbent Pillows to absorb high-volume leaks and spills of oil and other petroleum-based liquids on land or water. Polypropylene filler is left in its natural hydrophobic state, repels water (and floats) while only absorbing oils and other hydrocarbons. Absorbent Pillows are easy to place in hard-to-reach areas, use under machines and leaky hydraulic hoses or wedge in corners cramped for space. 100% Post-Industrial Recycled Polypropylene Filler. Holds up to 29 gallons of oily liquid per case. Color-coding helps you visually identify the right absorbent for your needs. Bright white designates Oil Only absorbency for oil and other petroleum-based fluids, but not water, makes it easy to identify when saturated. 56-25-1

#WPIL1010 Oil-Only Absorbent Pillows 40 per case, 10" x 10" Use Absorbent Pillows to absorb high-volume leaks and spills of oil and other petroleum-based liquids on land or water. Polypropylene filler is left in its natural hydrophobic state, repels water (and floats) while only absorbing oils and other hydrocarbons. Absorbent Pillows are easy to place in hard-to-reach areas, use under machines and leaky hydraulic hoses or wedge in corners cramped for space. 100% Post-Industrial Recycled Polypropylene Filler. Holds up to 34 gallons of oily liquid per case. Color-coding helps you visually identify the right absorbent for your needs. Bright white designates Oil Only absorbency for oil and other petroleum-based fluids, but not water, makes it easy to identify when saturated. 50-25-1

#GSO430 3" x 4' Long, 30 socks per package, Gray, Polypropylene, Absorbency - Up to 25 gal. per package. Contain and Soak Up Leaks or Spills. Ideal for surrounding spilled fluids or wrapping around leaky machines. Easy and convenient to put into place. Contain spills to keep fluids from spreading into larger areas and becoming slippery hazards. Flexible to conform around machine bases and offer a snug fit with no seepage. Color-Coded Color-coding helps you visually identify the right sorbent for your needs. Gray signifies Universal sorbency. These durable, universal-application, 100% polypropylene-filled Socks absorb oils, coolants, solvents and water. Use them wherever you have a variety of spills and only want to stock one sock to cover everything. #75-50-1

#GSO1210 3" x 12' Long, 10 socks per package, Gray, Polypropylene,

Absorbency - Up to 25 gal. per package. Contain and Soak Up Leaks or Spills. Ideal for surrounding spilled fluids or wrapping around leaky machines. Easy and convenient to put into place. Contain spills to keep fluids from spreading into larger areas and becoming slippery hazards. Flexible to conform around machine bases and offer a snug fit with no seepage. Color-Coded Color-coding helps you visually identify the right sorbent for your needs. Gray signifies Universal sorbency. These durable, universal-application, 100% polypropylene-filled Socks absorb oils, coolants, solvents and water. Use them wherever you have a variety of spills and only want to stock one sock to cover everything. #75-50-2

211

211

#EN5254-10Spill pallet 2000 with drain plug Protect employees and prevent costlycleanups by keeping overflows and spills off the floor and in thePoly-Spillpallet 2000 where they can be easily recovered. Thissecondary containment system, designed for two drum storage, isengineered to meet the rigors of today's regulatory environment.Forkliftable. 54"x29"x17". Need a ramp? Ask for the Poly Ramp withRamp Extender. Exceeds DOT 40 CFR 264.175. 60lbs. 55 Gallon SumpCapacity. Holds up to 2,000 lbs. UDL ForkliftableRemovable grates for easy cleaning

#EN5000-10With a maximum sump capacity of 93 gallons, this fourdrum pallet features a 6000lb UDL rating, translucentsidewalls and removable grates. Forkliftable. Need a ramp?Ask for the Poly Ramp with Ramp Extender. Exceeds DOT40 CFR 264.175. 91lbs. 93 gallon sump capacity.

#EN5103-10Low-Profile IN-LINE POLY-SPILLPALLET™ 3000Where no drum storage has gone before.You'll be surprised how much new space you'll be able tofind around the plant floor when you start storing drums onour In-Line Poly-Spillpallet 3000. Start storing them in-linenear the wall, between columns, and in all those spaces youthought were unusable -- until now. It has the sameperformance specs as the Poly-Spillpallet 3000. It's justanother innovative way to help you manage your hazardousmaterials. Optional drain hole with plug and tarp foroutdoor storage.

#EN5401-10Holds four 55-gallon drumsLow 11-1/2" high profileHolds up to 3,000 lbs. UDL weightNew and improved non-skid, removable grates100% polyethylene construction66-gallon* maximum sump capacity meets EPA40 CFR 264.175 requirementsRaised edge on back and sides helps orient barrelson pallet

LYN DISTRIBUTING 965 North Redwood Road North Salt Lake, Utah 84054Phone in Salt Lake Area 295-5022 Out Side Salt Lake Area 1-800-366-5022

212

212

EN5000-10POLY-SLIM-LINE™ 6000 Slim is in. Poly-Slim-Line 6000 offers all of the same advantages ourPoly-Spill Pallet 3000 offers and more! This new addition toour pallet family maintains the low profile of the 3000 serieswhile increasing the UDL capacity to 6000 lbs. Optional drainhole with plug and tarp for outdoor storage.

#EN5039-10Get big performance at a great price withour Poly Ramp. The ribbed non-skidsurface allows for safe walk-ups. Holds upto 1,000 lbs. of UDL weight.

100% polyethylene construction10° ramp slopeRibbed, non-skid surface for safe walking

POLY-SUPER SUMP™ #EN8101-10Poly-Super Sump offers an extra edge in extraspill protection, controlling spills beforereaching the floor and reducing the risk of slipand fall injuries. One-piece molded 100%polyethylene means there are no joints orseams to leak. Won't rust or corrode!Holds up to four 55-gallon drums.The simple, cost efficient alternative tostandard spill pallets.

Drain Protector

Need a protective cover for drains, grates and manholes?Drain Protector's patented urethane bonding properties allowthe flexible mat to quickly seal an opening once installed.Environmentally safe and proven effective, Drain Protectoris flexible to cover a wide variety of opening configurations.Choose a size that is at least 6" larger than your drain forbest performance. 24” x 24” #E3011-10 36” x 36” #E3012-10 48” x 48” #E3013-10


Page 2213

213

tamper Proof! This convenient six gallon screwtop bucket kit is easily stored in shop corners orbehind the cab of industrial vehicles. MeetsUN1H2/Y30/S for packaging group II and III.Mounting bracket available. Six gallonrecovery capacity per kit. 10lbs. 15" diameter x18" high.

Contents: 1 six gallon bucket, 2 socks3" x 4', 20 pads 17" x 19", 1 pair of splash-resistant goggles, 1 pair of Nitrile gloves, 1disposal bag w/tie, 1 Instruction booklet.#E9005-10 oil #E 9007-10 universal#E9006-10 oil#E9008-10 universal refills#E 9115-10 aggressive fluid#E9116 -10 refill

This small stowaway kit has all of the great featuresof our popular Spill Responder kit in a small safetyyellow bag perfect for tight storage areas. Great forforklifts and marine watercraft. 18"x17"x6". 8Gallon Recovery Capacity. 8 lbs.

Contents: 1 water-resistant nylon bag, 3 socks3"x4', 1 sock 3"x10', 1 pillow 18"x18", 12 pads17"x19", 1 Pair of splash-resistant goggles, 1 Pairof Nitrile gloves, 2 Disposal bags w/ties, 1Emergency Response guidebook, 1 Instructionbooklet. Small kit #E9073-10 oil#E 9074-10 universal

This compact, portable vehicle response kit is idealfor small transportation spills. Contents packed insafety yellow nylon bag. Stores easily in truck cabsand stow spaces. 8"diam. x 17" long. 5 GallonRecovery Capacity. 5lbs.

Contents: 1 water resistant nylon bag, 2 socks3"x4’, 10 pads 17"x19", 1 Plug N Dike plug pattie,1 disposal bag w/cable tie, 1 pair of Nitrile gloves,1 Emergency Response guidebook, 1 Instructionbooklet.#E9071-10 oil #E 9072-10 universal


Page 3214

214

POLY-DRUM FUNNEL™ TALLBig splash protection when you're pouringfrom buckets into closed-head drums. Itprovides a higher 3½" side wall to reducesplash. #EN3002-10

This resealable economy spill kit is easilystowed behind or under the seats of workvehicles, boats and planes. 5 Gallon RecoveryCapacity. 5lbs. 18" x 4" x 20".

Contents: 1 Zip plastic bag, 2 socks 3"x4',15 pads 17"x19", 1 Pair of Nitrile gloves, 1Disposal bag w/tie, 1 Instruction booklet .#E9003-10 oil #E 9004-10 universal#E9093-10 aggressive fluid acids

This always ready kit is packed in a heavy dutywater-resistant nylon bag complete with zipper topand carry handles. Easily transported from site to site, this kit is amust for vehicles and vessels. 20"x9"x19". 15Gallon Recovery Capacity.

Contents: 1 water-resistant nylon bag, 3 socks3"x4', 2 socks 3"x10', 12 pads 17"x19", 1 pair ofsplash-resistant goggles, 3 pair of Nitrile gloves, 10disposal bags w/ties, 1 Instruction sheet.#E9030-10 UNIVERSAL#E 9032-10 OIL#E9031-10 REFILL UNIVERSAL#E9033-10 REFILL OIL#E 9132-10 AGGRESSIVE LIQUID#E 9133-10 REFILL AGGRESSIVE


Page 4215

215

408-gallon* maximum sump capacity exceeds EPA40 CFR 264.175 12,000 lb. UDL weight capacity sotwo IBCs can be stacked on top of sump 48" x 48"polyethylene platform is sized to fit storage needsof most IBC designs. Wet contact areas are allpolyethylene with UV inhibitorPedestal scuff cap is metal Safely stack multipleunits

POLY-DRUM FUNNEL™ #EN3050-1055 COVERFor use with Products No.3002-YE, 3005-YEand 3090-YE

60 gal.self-closing cabinet 43"x18"x65" 299 lbs.


Page 5

216

216

Our Oil Water Separator is a simple, low-cost device designed for the removal of non-emulsified oilfrom water. Contaminated water is purified by a replaceable filtration media. Simply pour oil-contaminated water into the unit and oil-free water will flow from the discharge holes in the bottom. Thefilter can be supported by a 5-gallon bucket or positioned directly over a drain to collect treated water. Formore demanding applications, stack two or three units together. The first unit acts as a rough pre-filter, whilethe subsequent filters insure an oil-free effluent. The last unit can also be filled with activated carbon forremoval of organic contaminants. The unit is shipped with approximately 7 pounds of oil sorbent capable ofcapturing up to 5 gallons of oil. 1/box 14.5 lbs.#3007 FOR UNIT WITH WITH MEDIA HOLDER#3008 MEDIA REFILL KIT 50 QUART REFILL 12 – LBS.


217

217

PORTABLEWORK STATION

JANITOR CART WILL ROLL UP RAMP FORLOADING AND UNLOADING. PALLET BROOMS,SCRAPERS, DUST PANS, MOPS AND TRASHCONTAINER WILL BE WITH THE JANITORCART.1 EACH 55 GALLON DRUM REFILLABLE WITHCLEANING SOLUTION FOR ON SITE CLEANING.THIS DRUM WILL REFILL MOP BUCKETS FORUNDER RACK CLEANING 9 TO 11 TIMESBEFORE REFILLING THE SOLUTION DRUM.THE CONTAINMENT PALLET WILL HOLD 13 - 15DUMPS OF THE MOP BUCKETS. THE PALLETHAS A PLUG ON THE SIDE FOR EMPTYING ANDTHE EMPTY DRUM WILL LIFT OFF PALLET FORCONTAINMENT CLEANING. THE DRUM HOLDERIS ATTACHED TO 1/2 OF THE GRATE AND WILLLIFT OFF FOR CLEANING.THE CLEANING SOLUTION DRUM MAY BE FILLIN THE 2" PLUG AT THE TOP OF THE DRUMFOR QUICK FILLING. THE 2" FAUCET ON THEBOTTOM WILL FILL MOP BUCKETS QUICK ANDEASY. ROLL THE EMPTY MOP BUCKET UNDERTHE FAUCET THEN OPEN AND FILL IN 1MINUTE. OPEN SMALL AIR VALVE ON TOPPLUG TO AVOID VACCUM AS LIQUID FILLS MOPBUCKETS.THE RAMP WILL FOLD UP BEHIND THESOLUTION DRUM FOR STORAGE WHEN NOT INUSE.

LYN DISTRIBUTING965 NORTH REDWOOD ROADNORTH SALT LAKE, UTAH 84054PHONE 1-800-366-5022

218

218

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD NORTH SALT LAKE, UTAH 84054 PHONE 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022 WEB WWW.LYNDIST.COM

Bags for Square Trash cans 50 gallon – 56 gallon High Density Bags

HD43X48H--5 56 Gal. 43" X 48"Clear plastic bags 12 mic 200/case HD43X48HP-R-5 56 Gal. 43"X48"Clear plastic bags 16 mic 200/case HD43X48EXH+-5 56 Gal. 43"X48" Black plastic bags 22 mic 150/case

Bags for Round Trash cans 50 gallon – 60 gallon High Density Bags

H3860H 38" X 60" plastic bags 14 mic 200/case HD38X60-EXH-5 38" X 60" Clear waste bags 16 mic 200/case HD38X60EXHBLK-5 38" X 60" Black trash bags 22 mic 150/case HD38X60EXHCOR-5 38" X 60" Clear trash bags 22 mic 150/case

Bags for Round/Square cans 33 gallon – 45 gallon High Density Bags

HD40X48H-5 40" X 48" Clear trash bags 12 mic 250/case HD40X48EXH-5 40" X 48" Clear trash bags 16 mic 250/case HD40X48EXH-CS-5 40" X 48" Black trash bags 22 mic 150/case

Bags for Round/Square cans 25 gallon – 33 gallon High Density Bags

HD33X40-5 33" X 40" Clear trash bags 12 mic 500/case HD33X40EXH-5 33" X 40" Clear trash bags 16 mic 250/case HD33X40EXHCOR-5 33" X 40" Black trash bags 22 mic 250/case

Bags for Wall Hugger cans 20 gallon – 25 gallon High Density Bags

HD30X37EXH-5 30" X 37"Clear bags 16 mic 20 rolls of 25 500/case

Bags for Office Waste cans 28 Quart – 41 Quart High Density Bags

HD24X24-5 24" X 24" trash bags 6 mic 20 rolls of 50 1000/Case HD24X24-H-5 24" X 24" trash bags 8 mic 20 rolls of 50 1000/Case H24X33-5 24" X 33" trash bags 6 mic 20 rolls of 50 1000/Case HD24X33H-5 24" X 33" trash bags 8 mic 20 rolls of 50 1000/Case

3-11-2010

219

219

Highly ConcentratedLotion Green Color With Lemon

FragranceThis rich green lotion softener is the most highly concentrated ever available. It deliverscomplete softening and static-free fabric at extremely economical dilutions. Often, particularlyfor household use where an accurate measuring pump is not available, it is recommendedthat the product be cut with water to avoid overuse and waste.

Contained optical brighteners revive whites and colored fabrics actually restoring their newappearance. These brighteners are not destroyed by hot drying and ironing.

The special quaternary ammonium softening ingredients stay with the fabric during extractionrather than going down the drain. These cationic agents attach themselves securely to allfibers.Regular use of this softener extends the use of linens, towels, and clothing. It can actuallydouble fabric life.

Unlike many softeners, this product is removed with each wash. It cannot build up and dullfabric. Also this product is specially formulated to help avoid iron scorch.

DIRECTIONS:COMMERCIAL MACHINES—For the following capacity washers add the amount shown:

200 pound capacity- 4 to 8 ounces 75 pound capacity - 2 to 4 ounces35 pound capacity - 1 to 2 ounces. Program dispenser to add correct amount of softenerwith final rinse water. After all items of liquid system are set, run test load of badly soiled orstained linens to observe remarkable cleaning and softening. If ironic scorch or resistance towetting are noticeable, reduce the amount of softener added.If static is noticed after drying, increase softener added.

HOUSEHOLD MACHINES—Mix softener concentrate with equal parts water. Add 1 ounce ofthis mix to final rinse, less for smaller than standard machines.

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NORTH SALT LAKE, UT. 84054PHONE 1-801-295-5022 OUT SIDE SALT LAKE AREA 1-800-366-5022

220

220

Use nature's own citrus extractsto cut through heavy grease,grime, spots and stains! Thisbiodegradable, non-toxic spotremover penetrates, lifts andremoves tough stains and soilsfrom fabrics, without fadingcolors. Powers out the tougheststains—the natural way!

DIRECTIONS: Spray directly onsoils and stains, and let set for 2to 3 minutes. Then simplylaunder as usual.

Always test fabrics for colorfastness before using.

CITRUSLAUNDRY

PRE-SPOTTERNEW GENERATION CLEANER

ALL NATURAL !

To remove carpet stains, spraydirectly onto area to be cleaned.Allow to set for 3 to 5 minutes,agitate with soft brush, then blotout with a damp, clean towel.

CAUTION: May irritate eyes. Incase of contact, flush with coolwater for at least 15 minutes.


This product contains CAS Numberd-Limonene ……………………..5989-27-5Tetrapotassium pyrophosphate ……………………………………..…… 7320-34-5Organic phosphate ester … .68130-47-2Triethanolamine ......................102-71-6Isopropanol ..............................67-63-0

LYN DISTRIBUTING 965 No. Redwood Road No. Salt Lake, Utah 84054Phone (801) 295-5022 Out Side Salt Lake Area (800) 366-5022

221

221

Concentrated Dry BleachThis free flowing granular powder supplements

detergent admirably. It contains a specialslow-release chlorine source which oxidizes stainsand tough soils as no detergent alone can. Whenused as directed it is safe on any colorfast fabricincluding whites, permanent press and some coloreditems.

Not only does this dry bleach remove stains but italso improves the overall whiteness and brightness offabric. Graying of whites and dulling of color iseliminated.

The slow-release chlorine featured in this productallows it to deliver full effectiveness all the way to thebottom of the drum. This chlorine instantly releases inwash water to attack soil.

When used as directed this bleach cannot damagecellulosic or non-cellulosic fiber and reduce fabric life.Other bleaches whose chlorine

source is not as stable can dissociateunevenly burning spots in sensitive fabric.

For very heavily soiled whites, thispowder may be used as a bleach to removestains often considered permanent. Justfollow directions for desired results.

DIRECTIONS FOR USE:For the following capacity commercial.washers add the amount shown:

35 Pound......................2 - 4 ounces50 Pound......................3 - 5 ounces75 Pound .....................5 - 7 ounces

For household machines add 1/4 cup to1/2 cup to wash water. Fill and swirl agitatorto dissolve. Add detergent and launder asusual.

Test for color fastness by applying asmall amount of bleach solution to aninconspicuous area of the fabric. If fabric isaffected, do not wash with this bleach.

PROPERTIES:Color White GranularOdor ChlorineAvailable Chlorine 8% Typical

PACKAGING :200 Pound Barrel100 Pound Barrel50 Pound Barrel

LYN DISTRIBUTING 965 No. Redwood Road · No. Salt Lake, UT. 84054 · (801)295-5022

DISPATCH

222

222

Concentrated Dry BleachThis free flowing granular powder supplements

detergent admirably. It contains a specialslow-release chlorine source which oxidizes stainsand tough soils as no detergent alone can. Whenused as directed it is safe on any colorfast fabricincluding whites, permanent press and some coloreditems.

Not only does this dry bleach remove stains but italso improves the overall whiteness and brightness offabric. Graying of whites and dulling of color iseliminated.

The slow-release chlorine featured in this productallows it to deliver full effectiveness all the way to thebottom of the drum. This chlorine instantly releases inwash water to attack soil.

When used as directed this bleach cannot damagecellulosic or non-cellulosic fiber and reduce fabric life.Other bleaches whose chlorine

source is not as stable can dissociateunevenly burning spots in sensitive fabric.

For very heavily soiled whites, thispowder may be used as a bleach to removestains often considered permanent. Justfollow directions for desired results.

DIRECTIONS FOR USE:For the following capacity commercial.washers add the amount shown:

35 Pound......................1 - 2 ounces50 Pound......................2 - 3 ounces75 Pound .....................3 - 4 ounces

For household machines add 1/8 cup to ¼cup to wash water. Fill and swirl agitator todissolve. Add detergent and launder asusual.

Test for color fastness by applying asmall amount of bleach solution to aninconspicuous area of the fabric. If fabric isaffected, do not wash with this bleach.

PROPERTIES:Color White GranularOdor ChlorineAvailable Chlorine 16% Typical

PACKAGING : 200 Pound Barrel100 Pound Barrel 50 Pound Box or Pail

LYN DISTRIBUTING 965 No. Redwood Road · No. Salt Lake, UT. 84054 · (801)295-5022

DISPATCH PLUS

223

223

LAUNDRY DETERGENT

HI-LITE CONCENTRATE is low sudsing, biodegradeable, concentrated,and specifically formulated to work as well in home automatic washingmachines as in laundry wheels up to 100 pounds capacity. It is designed togive maximum performance in hot, warm, or cold water. It also substantiallyreduces most formations of lime soap deposits on machines and fabric.Thus the hardness factor of the water is of little consequence.

The proper blending of surfactants, phosphates, silicates, suspendingagents and optical brighteners makes HI-LITE CONCENTRATEDDETERGENT an exceptional laundry product leaving fabrics lookingbrighter and feeling cleaner and softer.

DIRECTIONS

For home laundry use ¼ cup in top loading or front loading machines.For laundry wheels use ¼ to ½ cup per 100 pound load.

PRECAUTIONS

Keep out of reach of children.In case of ingestion drink large quantities of water or milk, contactphysician.

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE, UT.84054PHONE 801-295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

HI-LITESUPER

CONCENTRATE

224

224

LAUNDRY DETERGENTHI-LITE+ CONCENTRATE is low sudsing, biodegradeable, concentrated,and specifically formulated to work as well in home automatic washingmachines as in laundry wheels up to 100 pounds capacity. It is designed togive maximum performance in hot, warm, or cold water. It also substantiallyreduces most formations of lime soap deposits on machines and fabric.Thus the hardness factor of the water is of little consequence.

The proper blending of surfactants, phosphates, silicates, suspendingagents, optical brighteners, and color safe bleach make HI-LITE +CONCENTRATED DETERGENT an exceptional laundry product leavingfabrics looking brighter and feeling cleaner and softer. This product willhelp keep fabric lasting longer because it contains no harsh chemicals.This product is a natural deodorizer for fabric. Leaves fabric clean andfresh!

DIRECTIONSFor home laundry use 1/8 to 1/4 cup in top loading or front loading machines.For laundry wheels or large commercial machines use ½ cup per 100 pound load.

PRECAUTIONS



HOUSEHOLD LAUNDRY35 lb. Pail = 480 wash loads of average wash size (about 7 lbs.)50 lb. Pail = 680 wash loads of average wash size .(about 7 lbs.)

COMMERCIAL LAUNDRY BELOW35 lb. Pail = 180 wash loads of average commercial size (80 lbs.)50 lb. Pail = 265 wash loads of average commercial size (80 lbs.)(slightly larger amounts may be use for extra heavy soils.)

WITH COLORSAFE BLEACH

225

225

Whitens - Cleans – DeodorizesACTIVE INGREDIENTS:

SODIUM HYPOCHLORITE 11 – 15 %CAUTION: CAN CAUSE BURNS. HARMFUL IF SWALLOWED.


For Industrial & Institutional Use OnlySTORE UPRIGHT IN A COOL PLACE. KEEP TIGHTLY CAPPED. USE ON WHITE ANDFAST COLORS ONLY. DO NOT USE ON SILK OR WOOL. ***Laundering – LaundryBleach cleans, whitens, removes oily body dirt, deodorizes and removes stains. For top loadingautomatics - ½ cup per load. Wringer type washers – ½ cup per load. Front loading machines- ¼ cup per load. Use with a good laundry soap or detergent. Follow washer instructions ifyour machine has an automatic bleach dispenser. If not, add to wash water before clothes areput in or dilute in about 1 quart of water and add after machine has started and clothes arethoroughly wet, whichever is more convenient. Removing stains – Ink, fruit, vegetable,flower, grass, tea, coffee, scorch and mildew – use ¼ cup per gallon of hot water. Beforelaundering, soak entire garment in this solution for 5 minutes. Rinse well. Repeat if necessary.Use cool water for stains set by heat – such as egg, milk, blood; and on colored or delicatefabrics. To clean and deodorize - (refrigerators, enamel ware, bathtubs, washbasins,linoleum, tile. Wash. Then wipe with a solution of ¼ cup of laundry bleach per gallon of warmwater. Rinse. Repeat if necessary. Septic tank operation is not affected by regular farm andhome use of Laundry Bleach.CAUTION: IF bleach is splashed in eyes, flood with water. If swallowed, feed milk – callphysician. If splashed on skin rinse off with water. Do not use with ammonia or toilet bowlcleaners. Hazardous gases will release.Please Note: The use of this material being subject to conditions beyond the seller’s control,seller makes no warranty of any kind expressed or implied as to the material or its use. Theuser must assume all liability when using this product.

Lyn Distributing 965 North Redwood Road, North Salt Lake, Utah 84054Phone in Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

226

226

Powerful detergents combined withoptical brighteners and borax stainremovers give this laundrydetergent the extra strength to cleaneven the toughest grease and soil.It gives clothes "like new" brightnesswith the softness and fresh lemonscent expected from a qualitydetergent. Special water softeningingredients assure the bestperformance in hard waterconditions. Contains allbiodegradable surfactants.

DIRECTIONS: For top loadingwashers, use 3/4 cup of laundrydetergent per load.Front loading washers hold smallerloads, and require less detergent.

For institutional washing machines,use 1 cup of laundry detergent per20 pounds of laundry. Extremelysoiled garments may require a pre-soak treatment or larger amounts ofdetergent.

POWDERED

LAUNDRYDETERGENTNO PHOSPHATE FORMULAFOR AUTOMATIC WASHERS

CONTAINSWHITENERS & BRIGHTENERS

FOR EXTRA CLEAN CLOTHES

BIODEGRADABLE

CAUTION: Harmful if swallowed.See side panel for further cautions

and first aid instructions.


CAUTION: Harmful if swallowed.Avoid contact with skin, eyes, ormucous membranes. Containssodium metasilicate.FIRST AID:External - Flush with water.Eyes - Flush eyes and undereyelids with plenty of cool water forat least 15 minutes, If irritationpersists, obtain medical attention.Internal - Give several glasses ofwater followed with citrus fruit juice.Call a physician immediately.

NET CONTENTS

LEMONLEMONFRESHFRESH

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD, NORTH SALT LAKE, UTAH 84054PHONE 1-801-295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

227

227

Whitens - Cleans – DeodorizesACTIVE INGREDIENTS:

SODIUM HYPOCHLORITE 5.25 %CAUTION: CAN CAUSE BURNS. HARMFUL IF SWALLOWED.


For Industrial & Institutional Use OnlySTORE UPRIGHT IN A COOL PLACE. KEEP TIGHTLY CAPPED. USE ON WHITE ANDFAST COLORS ONLY. DO NOT USE ON SILK OR WOOL. ***Laundering – LaundryBleach cleans, whitens, removes oily body dirt, deodorizes and removes stains. For top loadingautomatics - 1 cup per load. Wringer type washers – 1 cup per load. Front loading machines- 1/2 cup per load. Use with a good laundry soap or detergent. Follow washer instructions ifyour machine has an automatic bleach dispenser. If not, add to wash water before clothes areput in or dilute in about 1 quart of water and add after machine has started and clothes arethoroughly wet, whichever is more convenient. Removing stains – Ink, fruit, vegetable,flower, grass, tea, coffee, scorch and mildew – use 1/2 cup per gallon of hot water. Beforelaundering, soak entire garment in this solution for 5 minutes. Rinse well. Repeat if necessary.Use cool water for stains set by heat – such as egg, milk, blood; and on colored or delicatefabrics. To clean and deodorize - (refrigerators, enamel ware, bathtubs, washbasins,linoleum, tile. Wash. Then wipe with a solution of 1/2 cup of laundry bleach per gallon ofwarm water. Rinse. Repeat if necessary. Septic tank operation is not affected by regular farmand home use of Laundry Bleach.CAUTION: IF bleach is splashed in eyes, flood with water. If swallowed, feed milk – callphysician. If splashed on skin rinse off with water. Do not use with ammonia or toilet bowlcleaners. Hazardous gases will release.Please Note: The use of this material being subject to conditions beyond the seller’s control,seller makes no warranty of any kind expressed or implied as to the material or its use. Theuser must assume all liability when using this product.


228

228

SAF-T-BLEACH CONC. is also useful for odor reduction. Because it is an oxygenbleach SAFE-T-BLEACH CONC. will not cause yellowing of nylon or resin treatedpolyester/cotton blends.

SAF-T-BLEACH CONC. is also utilized to remove heavy mildew stains fromcotton without adversely affecting the tensile strength of the fabric.

SAF-T-BLEACH CONC. possesses many other versatile features including rapidsolubility in water, stability In storage, elimination of anti-chlor, ease of use ineither the suds or bleach operation, safety on colored fabrics, and nondestructiveeffect on fluorescent whitening agents.

Use 2 ounces SAF-T-BLEACH by weight at 115 Deg. to 200 Deg. F. in the finalsuds or separate bleach operation as desired. Bleach at least 7 minutes at theusual low suds level. Drain and follow with normal procedure for completing washcycle.

FOR DIFFICULT Stains AND STAIN REMOVAL FROM DELICATE FABRICS:Use 1pound of SAF-T-BLEACH in a soak bath (about l-2 ounce per gallon ofwater). Use a water leve1 that covers the goods to be treated. Soak overnight at atemperature of 75° to 115° F. Avoid unnecessary agitation that could harm delicatefabrics. Drain, rinse and process as needed for the particular fabric.

FOR REMOVAL OF HEAVY MILDEW STAINS AND OTHER DIFFICULTSTAINS FROM COTTON:Wash goods to remove excessive soil. Use 7 pounds of SAF-T-BLEACH at the usuallow suds level. Start at 160° F. for 30 minutes. Drain, rinse thoroughly and follow withnormal procedure for completing wash cycle.

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE, UT. 84054PHONE- SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

Having effective bleaching and stain removal characteristics, SAF-T-BLEACH CONC.can be used under varying conditions of concentration, pH and water temperature.

DIRECTIONS

FOR NORMAL WASHING OPERATIONS WITH NORMAL FABRICS AND STAINS:

SAF-T-BLEACH CONC. is a non-chlorine, dry oxygen bleach for use in the commerciallaundry as a replacement for chlorine type bleaches. It is an all fabric, color safe bleachand is suitable under those conditions where chlorine bleach cannot be used.

OXYGEN BLEACHCOLOR SAFE

229

229

SAF-T-BLEACH is a non-chlorine, dry oxygen bleach for use in the commerciallaundry as a replacement for chlorine type bleaches. It is an all fabric, color safebleach and is suitable under those conditions where chlorine bleach cannot beused.

Having effective bleaching and stain removal characteristics, SAF-T-BLEACH can be used under varying conditions of concentration, pH and water temperature.

SAF-T-BLEACH is also useful for odor reduction. Because it is an oxygen bleachSAFE-T-BLEACH will not cause yellowing of nylon or resin treatedpolyester/cotton blends.

SAF-T-BLEACH is also utilized to remove heavy mildew stains from cottonwithout adversely affecting the tensile strength of the fabric.

SAF-T-BLEACH possesses many other versatile features including rapidsolubility in water, stability In storage, elimination of anti-chlor, ease of use ineither the suds or bleach operation, safety on colored fabrics, and nondestructiveeffect on fluorescent whitening agents.

DIRECTIONS

FOR NORMAL WASHING OPERATIONS WITH NORMAL FABRICS AND STAINS:

Use 2 ounces SAF-T-BLEACH by weight at 115 Deg. to 200 Deg. F. in the finalsuds or separate bleach operation as desired. Bleach at least 7 minutes at theusual low suds level. Drain and follow with normal procedure for completing washcycle.

FOR DIFFICULT Stains AND STAIN REMOVAL FROM DELICATE FABRICS:Use 1pound of SAF-T-BLEACH in a soak bath (about l/2 ounce per gallon ofwater). Use a water leve1 that covers the goods to be treated. Soak overnight at atemperature of 75° to 115° F. Avoid unnecessary agitation that could harm delicatefabrics. Drain, rinse and process as needed for the particular fabric.

FOR REMOVAL OF HEAVY MILDEW STAINS AND OTHER DIFFICULTSTAINS FROM COTTON:Wash goods to remove excessive soil. Use 7 pounds of SAF-T-BLEACH at the usuallow suds level. Start at 160° F. for 30 minutes. Drain, rinse thoroughly and follow withnormal procedure for completing wash cycle.

OXYGEN BLEACHCOLOR SAFE

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE, UT. 84054PHONE- SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

230

230

LAUNDRY DETERGENT

SPRING FRESH DETERGENT is low sudsing, biodegradeable,concentrated, and specifically formulated to work as well in home automaticwashing machines as in laundry wheels up to 100 pounds capacity. It isdesigned to give maximum performance in hot, warm, or cold water. It alsosubstantially reduces most formations of lime soap deposits on machinesand fabric. Thus the hardness factor of the water is of little consequence.

The proper blending of surfactants, phosphates, silicates,suspending agents and optical brighteners makes SPRING FRESHDETERGENT an exceptional laundry product leaving fabrics lookingbrighter and feeling cleaner and softer.

DIRECTIONS

For home laundry use ¼ cup in top loading or front loading machines.For laundry wheels use ½ - 1 cup per 100 pound load.

PRECAUTIONS



SPRINGFRESH

231

231

Tough GuyLiquid Laundry Detergent

This rich viscous purple liquidrepresents the latest in thedevelopment of liquid surfac-tants. In recent years, scientistshave found that specialcombinations of syntheticwetting agents yield optimumfabric cleaning performanceand at the same time newagents have been invented withthe same concepts in mind.This product is the result of thisresearch in its best form. Thisproduct contains phosphatesand silicates.

Due to its high concentrationof active ingredients, thisdetergent removes the toughestsoils and stains at economicaluse dilution’s. Alone It cleans allsynthetic fabrics well and whena builder/break is added, itlaunders cottons and othercellulose fibers superbly. Thecharacters of this detergentallows it to solublize not onlywater based soil, but also oilbased grease, and others. Regular use of this detergentis good for your laundry andequipment. This product

DrumPall

will not damage even sensitivefabrics. It rinses well and willnot build up on fibers. Used asdirected colors stay bright andwhites will not gray. No harshacids or alkalis are contained tobe unsafe to the operator ordamage delicate machineparts.

This detergent may also beused as a presoak or pretreatfor certain stains. As a presoakit is highly dilutable and ofteneliminates the need for expen-sive limited use presoaks andsprays.

Ordinarily this detergent isdesigned for use as acomponent of a 4 item liquidfeed system in commerciallaundry applications. Incombination with, destainer,neutralizer, and softener. Ityields remarkable performanceon any fabric. It may also beused In household typemachines at levels far belowpowders.

PROPERTIES:

ColorOdorDensitySpecific GravityActivesBiodegradability

PACKAGING

55 Gallons Plastic6 Gallons

Deep PurpleLemon Fresh8.33 Lb./Gal.1.1226%Complete

LYN DISTRIBUTING965 No. Redwood Road o No.SaltLake.UT84054 o

This liquid flows smoothlythrough feeding equipment andwill not separate or clog pumps.It causes no deterioration topump seals or tubing.

See your representative forspecific laundry handling in-structions and other uses of thisfine product.DIRECTIONS:

For the following capacitywashers add the amountshown:200 Pound Capacity . . 12 to 16 ounce75 Pound Capacity . . .6 to 8 ounce35 Pound Capacity . . .3 to 4 ounce

Program dispenser to addcorrect amount of detergentwith wash water fill. After allitems of liquid system are set,run test load of badly soiled andstained linens to observeremarkable cleaning. Check foralkali or acid residue and adjustbreak or neutralizer as needed.

232

232

700-090203

QUICK SLIDE-S Asphalt release agent

Provides a molecular film — a thin, heat-resistant shield —that does not allow hot, sticky asphalt to adhere tosurfaces. Asphalt will slide right off dump beds, rollers, spreaders, rakes, shovels and other surfaces. Made with100% natural ingredients. No hazardous diesel fuels, no harmful or noxious fumes. The special biodegradableformula is safe for both users and the environment, and it won’t degrade the quality of the asphalt. It even worksas a seal to protect against the damaging effects of rust and corrosion.

Use On:l Dump beds l Trucks l Rakesl Rollers l Spreaders l Shovels

Effective Against:l Asphalt deposits l Rust l Corrosion

Features and Benefitsl Prevents surfaces and saves time and money during clean upl Extends the working life of expensive tools and equipmentl 100% natural and biodegradable formula will not harm equipment or degrade quality of asphalt

DirectionsDilute 1 to 10 with water and spray back of truck beds. Asphalt maybe loaded into truck bed right away. Repeat protection for each newload of asphalt. Care should be taken as the release agent can softenand remove paint.

Racks and shovels may be sprayed or dipped into a 1 to 10 solution.

SafetyCaution: May be harmful if swallowed. May irritate eyes and skin. Keep out of the reach of children.

Quantities55 gallon30 gallon5 gallon4 x 1 gallon/case6 x 1 gallon/case LYN DISTRIBUTING PHONE 800-366-5022

PropertiesAppearance......................... Colorless liquidFragrance .......................... Soy scentConcentrate........................ YesSpecific gravity……........... 0.89Flash point ........................ >200 º FVOC content (% by wt.) ..... 1 %Petroleum Distillates…....... None

Active Ingredients CAS NumberMethyl Ester of Soybean Oil…………………………………………………….………......... 67784-80-9Nonionic Surfactant ……………………………………………………………………......... 9036-19-5Calcium Alkylbenzene Sulfonate………………………………………………….…….......... 68953-96-8Alkylbenzene Sulfonate…………………………………………………………..................... 68953-96-8



233

233

Special Solvent Shampoo For Rugs and Carpets

This specially formulated solvent shampoo has been developed for use as a bonnet scrub for rugs and carpets. It cleans quickly and thoroughly and lubricates the pad to prevent damage. Contains optical brighteners to restore original beauty to carpets by enhancing colors. No residue is left to resoil easily.

The bonnet method of cleaning is the fastest, driest way to maintain your carpets. It should not be considered as a deep cleaning procedure like rotary brush shampooing or extraction. One or both of these cleaning methods should be incorporated into your maintenance program on an infrequent basis. But for a speedy way to top clean and remove spots, the bonnet scrub can't be beat. Bonnet scrubbing requires a special shampoo since there is very little detergent solution applied. With the mild action of the well lubricated mop type bonnet pad, the cleaner has to do most of the work. This product removes tough soil even when nearly dry with little or no agitation. Its solvent penetrates petroleum grease and oil and its detergent encapsulates the emulsified oil as well as water based soil to allow them to be vacuumed away easily.

This product contains no harsh alkalis or petroleum solvents which might be harmful to sensitive carpet fibers or backing. It also liberates no obnoxious or irritating odor. This shampoo will not deluster fibers due to its neutral pH.

This remarkable product may also be used as a prespray for traffic lanes when diluted with water or a "water side" spotter when used full strength. Often it is the only product you need to keep your carpets looking great.

DIRECTIONS FOR USE:

BONNET SCRUB - Dilute 1 to 10 up to 1 to 16 in warm water. Spray area ahead of buffer with Bonnet Scrub solution. Soak bonnet in solution and buff. Allow to dry and vacuum thoroughly. SPOTTING - Use straight. Apply a small amount to spotted area and agitate with a soft brush or scraper. Blot with clean absorbent white towel. Apply a small amount of water to spot. agitate and blot again. Repeat process if spot is not completely removed. PRESPRAYING - Dilute from 1 to 4 up to 1 to 8 with water. Spray large spots and traffic lanes with solution. Rake or agitate with a brush. Shampoo, bonnet scrub or extract as desired. LYN DISTRIBUTING 965 No. Redwood Road, No. Salt Lake , Utah 84054 (801) 295-5022

BRITE BONNET

234

234

Although this product may be used on most surfaces, be sure to test before using. CARPETS: To remove pet odors from carpets, rugs, or floors, pour diluted product directly on odor spot. Leave overnight. Use a clean white cloth to blot out product. If the odor persists, repeat the procedure. UPHOLSTERY: To remove musty odors from upholstered couches and chairs, simply mist the fabric. CARPET MACHINES: To deodorize carpets, add 1/4 cup each time the solution tank is refilled. RESTROOMS: To deodorize urinals and bowls, spray surfaces and surrounding area including floors & walls. LAUNDRY PRESPOTTER: Spray soiled areas with diluted product prior to washing. Leave overnight. DRAIN LINES AND DOWN PIPES: Use product a minimum of two times weekly to a maximum of four times depending on the usage of the building. Add product in amounts listed, starting on the lowest floor and working up at the rate of one floor every day. Do not treat the same floor twice. When the top floor is reached, continue treatment on the top floor only.

Pipe Size Dosage Frequency 2" 4 ounces twice/week 4" 8 ounces twice/week 6" 12 ounces twice/week 8" 16 ounces twice/week

GREASE TRAPS: For traps less than 20 cubic feet capacity, add 4 to 5 ounces of product daily by pouring in a sink or pipeline closest to the trap. This should be done at night or when the traps are used the least. After adding, flush down with a cup of lukewarm water. For grease traps larger than 20 cubic feet, add 8 to 10 ounces daily using the same procedure.

Digester A LIQUID LIVING BACTERIA

DESTROYS WASTE AND ODOR THE NATURAL WAY

FOR USE ON: FLOORS AND WALLS •• AROUND

TOILETS AND URINALS •• RUGS & CARPET STAINS •• CLOTHING •• BEDS ••

PET WASTE BOXES. RECOMMENDED FOR USE BY

HOSPITALS, RESTAURANTS, SCHOOLS, NURSING HOMES, APARTMENTS,

KENNELS, HOTELS & MOTELS, RECREATIONAL VEHICLES &

CHEMICAL TOILETS, INDUSTRIES, PRISONS AND ANYWHERE ODORS

ORIGINATE!

Contents: Lyn Distributing

965 North Redwood Road North Salt Lake, Utah 84054

Phone (801) 295-5022

SEPTIC TANKS: Add one pint per 25 cubic feet capacity for the initial treatment. Thereafter, use 8 ounces per week. This should be poured directly into toilet and flushed. If the septic tank has become clogged and odorous, add one gallon of product directly to the tank through the manhole. MUNICIPAL SEWAGE TREATMENT TRICKLING FILTERS: Use 5 to 6 gallons per million gallons of daily flow. For preventive maintenance, use 2 gallons per MGD weekly to maintain proper operation. RECREATIONAL VEHICLES & CHEMICAL TOILETS: Add 2 ounces per gallon of water in hold tank. DRAIN OPENER ODOR CONTROL: This product may be used following the use of sulfuric acid based drain openers to dispel the odor of hydrogen sulfide gas.

SAFETY Keep out of reach of children.

CAUTION: Contains emulsifiers. Undiluted product may cause eye irritation. Avoid contact with eyes. Avoid contact with open wounds. FIRST AID: If splashed on skin, wash affected areas with soap and water. Remove contaminated clothing. If splashed in eyes, flush with large quantities of water. If swallowed, drink two glasses of water. Call a physician immediately. NOTE: Do not subject product to disinfectants, hot or boiling water or chlorinated products. Please Note: The use of this material being subject to conditions beyond the seller's control, seller's makes no warranty of any kind expressed or implied as to the material or its use. The user must assume all liability when using this product.

235

235

This natural digestant product uses nature's own cleaning agents to rid grease traps and plumbing of grease accumulations. Fortified with LIPASE ENZYMES for instant action, this product should be used regularly to prevent clogs or back-ups and reduce or eliminate the need for unpleasant manual cleaning of traps.

This non-toxic, environmentally safe product uses the natural digesting power of selected bacteria strains. It helps to degrade grease accumulations by nature's own methods. Contains no harsh, corrosive, or dangerous chemicals.

DIRECTIONS: Grease traps should be cleaned before a maintenance program is started on other drains to prevent overloading of the system. For best results, apply the digestant at closing time to allow the bacteria and enzymes to work undisturbed overnight.

DRAIN MAID GREASE TRAP

DIGESTANT

BACTERIA / ENZYME CULTURE SPECIALLY FORMULATED TO CLEAN GREASE TRAPS AND

REDUCE PUMPING

ALL NATURAL—HIGHLY EFFECTIVE

For initial cleaning of dirty, slow, or clogged grease traps of average size (about 20 cubic feet), use a 1 quart dose of this digestant. Dissolve in one or two gallons of warm (NOT HOT) water, and let stand for one hour. Then pour this mixture into the grease trap or the nearest drain. If the grease trap is full of very hot water, flush with cold water first. Cleaning action will be faster if the floating crust in the trap is broken up before adding the digestant. Repeat this treatment every 3 days until water flows smoothly through the trap. Commercial or institutional traps require larger treatments of 2 quarts of digestant.

Traps should be maintained by weekly additions of digestant. Dissolve 1/2 quart in warm water and add directly to the trap to prevent back-ups and accumulations.

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NORTH SALT LAKE, UTAH 84054 PHONE (801) 295-5022 OUT SIDE SALT LAKE AREA (800) 366-5022 FAX (801) 295-5044

236

236

Drainmate Super is a USDA authorized concentrated blend (double the bacteria count of most products on the market) of living aerobic

and anaerobic bacteria specially selected and adapted for their ability to produce large amounts of amylase, protease, cellulase and lipase

enzymes important in degrading common sanitary wastes. This bacteria contains the newest bio-technological ingredient (BioS

3112) and is considered new generation and are impervious to bleach, disinfectants and acids. This product can be used successfully in

drains, grease traps and septic tanks to quickly degrade wastes and reduce odors.

Note: This product performs best within a ph range of 5.5 - 8.5 and a temperature range of 50°F -100° F. Extremes of pH and temperature, as well as wide shifts in either parameters over a short period of time should be avoided. Cold temperatures reduce the effectiveness of the

product and no bacteria activity can be expected below 40° F.

AREAS OF USE MOTELS *RESTAURANTS*CHEMICAL PLANTS

RECREATIONAL VEHICLES * HOMES * SCHOOLS * MARINAS * OFFICE BUILDINGS * MEAT MARKETS

APPLICATIONS GREASE TRAPS * DRAINLINES * DOWN PIPES * PORTA

TOILETS * SEPTIC TANKS * SUMP PUMPS * WET WELLS

TECHNICAL DATA FORM: Liquid FLASH POINT: None ODOR: Sweet BOILING POINT: 212° F COLOR: White-Milky SOLUBILITY IN WATER: 100% DETERGENCY: Mild SPECIFIC GRAVITY: 1.0 TOXICITY: Non-Hazardous % VOLATILE BY VOLUME: 95% WETTING ABILITY: Excellent pH: 6.5+ STORAGE STABILITY: 1 to 2 years VISCOSITY: Thin COLD STABILITY: 32° F EVAPORATION RATE: Slow PHOSPHATES: None BIODEGRADABILITY: Yes ANALYSIS PLATE COUNT: 100,000,000/ml.-360 billion/gal.

Demonstrates visible reductions in grease when field test in Restaurant grease traps.

Drainmate Super Digestant Contains BioS 3112 Advanced Grease Control Will reduce grease trapped in drains & reduce odors in drains!

PACKAGED IN 6-GALLON PAIL, 6 X 1-GALLON BOTTLES, 30-GALLON DRUM, 55-GALLON DRUM

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD, NORTH SALT LAKE, UTAH 84054 PHONE 801-295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022 FAX 801-295-5044

WEB SITE WWW.LYNDIST.COM FOR MORE INFORMATION EMAIL [email protected]

237

237

Lyn Distributing • P.O. Box208 • Layton, Ut. 84041 • 800-366-5022

DUST CONTROL Concentrated Wetting Agent Form: Liquid

Color: Cloudy White

Odor: None

pH: 11.00 - 12.00

Solubility (in water): Soluble (in mineral spirits): Insoluble

Viscosity (CPS at 70oF): >40

Flash Point (ASTM D-7821): None

Specific Gravity: 1.10 ± 0.05 g/cm3

Density: 9.18 ± 0.05 lbs/gal

Storage Stability (at 70oF): 1 year

Ingredients C.A.S. # Water................................................7732-18-5 Sodium silicate.................................1344-09-8

Other DUST CONTROL Uses...

• Car Wash Wetting Agent • Valve Lubricant • Sludge Dewatering Activator • Sludge Drying Bed Penetrant • Tank Protector

DIRECTIONS: To lay the dust on roads, dirt streets, play fields, ball diamonds, driveways or parking lots, add 1 to 2 quarts of DUST CONTROL to 100 gallons of water. Increase the amount of product used when using hard water or when it is difficult to lay the dust. For mechanical sweepers, add 1 to 3 quarts of DUST CONTROL per 100 gallons of water, using the larger amounts in hard water, or where the dust is oily and difficult to wet and pick up.

HMIS

Health .....................................0 Flammability...........................0 Reactivity................................0 Personal Protection ..........None

Severe

SeriousModerate

SlightMinimal

43210

Extreme High Moderate Slight Insignificant

NFPA

Health ...................................... 0 Flammability............................ 0 Reactivity................................. 0 Special Precautions............None

238

238

INDUSTRIAL DEFOAMER • Safe, Effective, Fast and Efficient Foam

Control


Waste water facilities, cooling towers, boilers, industrial process water streams, acid descaling operations found throughout industry.

This product is a silicone anti-foam emulsion that will control foam in all types of aqueous systems. Foam control applications are so numerous and so varied that this product should be evaluated whenever unwanted foam occurs.

If possible, apply product prior to system beginning to foam. It will require less product to prevent foaming from occurring than to eliminate foam that has occurred. Use a starting dosage rate of 50 ppm on a continuous basis. Increase or decrease the dosage rate until optimum control is achieved. The precise concentration required will vary by the application. Both process and environmental conditions such as water chemistry, temperature, humidity and pressure will affect foam formation and stability.

Description

Areas of Use

Directions

239

239

COIL CLEANER Alkaline Cleaner for Evaporative

Coils and Filters

Product Description

Coil Cleaner is 100% biodegradable. It is formulated for extra heavy duty cleaning, yet has self rinsing properties. Coil Cleaner has very high soil suspending qualities, which allow dirt to rinse off freely, whether it is flushed off, or falls off with the condensate water. Coil Cleaner does not contain solvents, is non-flammable, and is effective in water with up to 500 PPM hardness. Coil Cleaner is non-corrosive to most metals and will not harm painted surfaces.

Application

If air conditioning unit is not in use, Coil Cleaner should be flushed off with water. If unit is in use, rinsing may be omitted as the condensate water will flush it off. For extremely dirty coils, scrubbing may be necessary for a thorough cleaning.

Heavy Duty: Use Coil Cleaner as received. Medium Duty: One part Coil Cleaner - 30 parts water. Light Duty: One part Coil Cleaner - 60 parts water.

A.C.C.-100

LYN DISTRIBUTING 965 NO. REDWOOD ROAD, NO. SALT LAKE, UTAH 84054 PHONE 1-801-295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

240

240

LIQUID ICE MELTER

• Prevents Ice Reformation • Will not Harm Grass or Sidewalks • Contains No Acids, Alkalis or Salts • Easy to use

LYN DISTRIBUTING 965 North Redwood Road North Salt Lake, UT 84054 (801) 295-5022 WATS (800)366-5022 FAX (801)295-5044 E-mail : [email protected] WWW http://www.lyndist.com

Railroad yards, public buildings, hotels, commuter trains, factories, motels, schools, industrial distribution.

This convenient, ready-to-use liquid ice melting compound is formulated to work by azeotropic action. No heat is generated; no harsh, corrosive salts to destroy concrete surfaces or harm lawns; no waiting. This compound chemically unites with ice or snow and changes the normal freezing point, thus preventing adhesion to surfaces. Pre-treated surfaces may be swept clean of ice or snow. New formations may be removed by treating with this ice melting product. A truely unique formula of chemicals designed to melt ice and inhibits its reformation. No acids, alkalis, or salts. Will not harm grass or sidewalks. Ready to use.

For most uniform coverage, use a pump-up or compressed air sprayer which has been adjusted to a stream type spray pattern. On Flat Surfaces and Walkways: Score ice with a rake to enable deeper, faster penetration into ice formations. Spray product onto surface at a rate of 1 gallon per 3300 square feet for prevention, or at a rate of 1 gallon per 550 square feet for removal. On Windows: Spray onto surface according to coverage rates listed above. Cover surface with spray, allow a few minutes for melting to occur, then wipe away ice layer. Note: Always use product at full strength. Do not dilute or add other chemicals.

Description

Areas of Use

Directions

241

241


• Effective When Deposits Are Built Upto 50% of Sewer Volume

• Reduces Amount of Debris LeftBehind in Manholes

• Breaks Up Hard Deposits of Sand andShale

• Loosens and Flushes Mud Trapped byTree Roots

• Compatible with Other SewerTreatment Agents

MUD & SILT REMOVERMUD & SILT REMOVERFlocculates heavy, dense deposits of mud andsilt, sanitary sewage, greasy deposits andsolidified detergents into particles that areeasily removed by flushing with water.

242

242

DIRECTIONS - SEWER LINE TREATMENTTo clean and remove deposits of sludge, silt, dirt, mud and sewage from STORMSEWERS, SANITARY SEWERS, and COMBINED STORM-SANITARY SEWERS useone of the methods shown below:1. Using buckets, add three gallons of MUD & SILT REMOVER per 1000 gallons of water. Pour directly

into open manhole.2. An alternate dosage method is to use one gallon of MUD & SILT REMOVER per 100 linear feet of

sewer pipe for each one-foot diameter of pipe. For example, a 2-foot diameter pipe will require 2 gallonsof MUD & SILT REMOVER per 100 linear feet.

3. Or, pour, into a manhole or other sewer opening, one gallon of MUD & SILT REMOVER per 100 feetof a one-foot diameter pipe. The next rain will supply enough agitation so that the MUD & SILTREMOVER will redissolve and wash out deposits. Regular monthly dosages of MUD & SILTREMOVER will remove storm sewer obstructions in a matter of months by rain action alone.

4. With Fire Hose Cleaning add MUD & SILT REMOVER as described by the three methods above.With Hydraulic Jet Pumping Units add MUD & SILT REMOVER at the rate of three gallons per 1000gallons of water.

DIRECTIONS -COOLING TOWER TREATMENTTo clean and remove deposits of sludge, silt, mud and dirt from fouledRECIRCULATING COOLING SYSTEMS and ONCE-THROUGH COOLINGSYSTEMS (water goes through system once and then out; 100% bleedoff with norecirculating of water), add MUD & SILT REMOVER as shown below, applying to thesump, tower basin or directly into the line in equipment room as with other watertreatment chemicals.

SYSTEM DOSAGES OF MUD & SILT REMOVER

1. Cooling Towers2. Absorption Units

(Lithium bromide)3. Air Washers or Humidifiers4. Evaporative Condensers

5. Hot or Chill Water6. Filter Beds or Ion Exchangers

1 quart per day per 100 tons (1000 gals)2 quarts per day per 100 tons (1000 gals)

1 quart per day per 100 tons (1000 gals)1 quart per day per 100 tons (1000 gals)

1 gallon per 5,000 gallons -once a week. Circulatewater for 24-48 hours. DRAIN system from its lowpoint until water runs clear. Repeat procedure asneeded.Backwash with one quart per 1000 gals.

For rapid Cleaning of badly fouled systems above, double dosage amounts until bleedoff water appears to beclean.

Lyn Distributing Tampa, Houston, Chicago, Los Angles, Salt Lake, Boise, Portland,Sacramento, Philadelphia, Denver, Dallas. Phone 1-800-366-5022

243

243

MUD & SILT REMOVER

• Biodegradable • Liquefies Deposits • Non Flammable • Water Soluble


Storm sewers, sanitary sewers, sewer lines, boilers, and cooling towers.

This concentrated liquid compound is intended to break-up and dissolve clusters and clumps of mud, silt, sand, sediment, sludge, and clay so that this matter can be flushed through lines with normal water flow. Storm sewers, sanitary sewers, and sewer lines often become clogged with this debris and normal flow is impaired or halted. Use of this product will chemically break-up these clumps of hardened matter into a liquid mixture of light weight, small, fluffy particles that are easily flushed through lines. Tree roots in sewer lines are a problem on their own, but they can track and hold mud and silt so that this matter becomes hardened and compacted. This product will dissolve these compacted debris, allowing them to be flushed through lines. Detergent residues which have solidified due to temperature changes can be broken up and flushed through sewer lines. The effectiveness of this product is not altered by water hardness or temperatures above the freezing point of water. Dilutes 1:10,000 with water.

To purge sewer lines, add one gallon of product into manhole for each 100 feet of one foot diameter pipe. Alternate dosage is one gallon of product for each 10,000 gallons of water. If available, flush product through lines with fire hose or high pressure hose. Repeat treatment on a regular basis to prevent severe formations.

Description

Areas of Use

Directions

244

244

POWER PLUNGER ODORLESS • Alkaline Type Drain Opener • Non-fuming • Economic • Low Odor • High Concentrate


Hotels, motels, apartments, prisons, schools, municipal buildings, restaurants, plumbing services.

Nonfuming, economical, low odor, no boil up, no backflash, harmless to pipes, rubber and septic tanks. This powerful, highly concentrated, ready to use, alkaline drain opener and maintainer may be used to clear clogged drains of organic matter, hair, paper, grease, and oils. As a drain maintainer, it can keep drain lines clear and free flowing and reduce offensive odors which are emitted by rancid matter in the drain lines. This alkaline drain opener works by saponification of grease and oil, turning them from hard, insoluble matter into soft, soapy-like material which is soluble in water. Note: Do not use this product with any other type of chemical. Ready to use.

When using this product, PROTECT FACE (especially eyes) by using full face shield or cup-type chemical goggles, AND OTHER PORTIONS OF BODY by using rubber gloves, rubber boots and rubber aprons. Use with adequate ventilation. 1. Slow Running Drains: Remove as much standing water as possible. Pour product into drain line and allow wetting agents and penetrants to work for at least 5 minutes. Flush through with hot water. Use from 1/4 cup to 1 cup of product, depending on drain size and extent of clog. 2. Stopped Up Drains: Remove any standing water. Pour product into drain line. Allow to remain for 10 to 20 minutes. Flush through with hot water. If drain is still slow running, use plunger and hot water and repeat procedure. DIRECTIONS

Description

Areas of Use

Directions

245

245

A Earth Friendly Product From Lyn Distributing

Formulated for use in applications where rinsibility is critical, Quick Slide-S is tested and proven to be a safe & effective product for use in many industries.

This product was developed as an economical method to reduce the asphalt from "sticking" to the beds of delivery trucks. Very concentrated dilute 1 part product to 6 to 10 parts water. Apply to surface before filling truck with asphalt.

Directions: Mix this concentrated product by adding 1 - 2 six-gallon bucket to an empty 55 gallon and then adding water slowly until drum is full and then stir to mix solution. (1-2 drums makes 500 - 600 gallons of RTU product). Apply the RTU product by any type of spray application to the bed of the truck. A "Drum HydroSprayer" applicator works best...consult your Sales Representative . When using a drum Hydrosprayer it will mix product for you.

One of the safest, most economical release agents available today... • Non-toxic • Excellent Rinsibility • Non Abrasive • Concentrated, Economical

• Biodegradable • High Flash Point • No Caustic Fumes

________ Product Specifications ________

Dangerous goods class: Non-hazardous Physical state: Liquid Odor: No fragrance added Color: Pale Yellow pH concentrate: N/A Net weight: 7.92 lb/gal Specific Gravity: 0.946 Molecular Weight: N/A Solubility in water: Complete Rinsibility: Excellent Surfactants: Non-toxic

Abrasives: None Flash point: >150°F ASTM D93 closed cup Boiling Point: 292°F Vapor Pressure @ 68°F: 0.9 mm Hg Evaporation Rate: 0.0098 Volatile by volume: % VOC's 0 grams per liter Toxicity: N/A Biodegradable: Yes, begins at 28 days in soil or 7 days in water Kauri-Butanol Value: >70

Quick Slide-S Biodegradable, Non-toxic

RELEASE AGENT Made From Farm grown plants!

Contains No V.O.C’S



246

246

ASPHALT RELEASE AGENT

DESCRIPTION:

This product was developed as an economicalmethod to reduce the asphalt from "sticking" tothe beds of delivery trucks. Veryconcentrated...one six gallon bucket of QUICKSLIDE makes a 55 gallon drum or one 55 gallondrum makes 500 gallons of ready to use AsphaltRelease.

Apply using a pressurized sprayer or by amechanical sprayer method. Use of this productwill save many hours of costly labor.

CAUTION:Do not take internally. If accidentalingestion does occur, drink large amount ofwater and consult physician. If splashedinto eyes, flush with large volumes of clearwater. Rinse empty container with waterbefore discarding in authorized landfill site.

KEEP OUT OF RE.ACH OF CHILDREN

PRECAUTION: AL USARIO: Si usted no lee Ingles, no use este producto haste que la etiqueta le haya sido explicada ampliamente.(TO THE USER: if you cannot read english, do not use this

This product is designed exclusively for industrial and institutional use by trained, professional maintenance personnel. Label directions and precautions must be followed exactly.LYN DISTRIBUTING will not be responsible for any injury, loss, or damage, if product is used in any manner not in compliance with label directions, or, if precautions are notobserved.

product until the label has been fully explained to you.

QUICK SLIDE

INTENDED FOR INDUSTRIAL AND INSTITUTIONAL USE ONLY NET CONTENTS:

LYN DISTRIBUTING 965 No. Redwood Road No. Salt Lake, UT. 84054Phone in Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

DIRECTIONS:

Mix this concentrated product by addingone six-gallon bucket to an empty 55 gallonand then adding water slowly until drum isfull and then stir to mix solution. (55 gallondrum makes 500 gallons of RTU product).Apply the RTU product by any type ofspray application to the bed of the truck. A"foaming" applicator works best...consultyour Sales Representative.

247

247

Root Bandit information sheetRoot Bandit is formulated for sewer line maintenance on a regular basis to prevent thebuildup of roots that cause blockage of flow. Root Bandit is not formulated for fastemergency clearing of heavy root growth already blocking sewer line flow.INITIAL KILLWhen poured into sewer line, Root Bandit coats roots and attacks the cells, causing the roots toatrophy or gradually shrivel and fall off to be passed through the sewer line with normal flow.Root Bandit also seeps in to the clay and tile joints of the sewer line to provide residual rootcontrol by attacking the cells of new roots as they attempt to grow in through the joints.

RECOMMENDED FOR REGULAR MAINTENANCE BY: Municipalities • Plumbers •Apartments • Campuses • Resorts • Hospitals • Schools • Motels/Hotels • Country Clubs /Industrial Concerns.

Directions:1. Start treatment at the first manhole of the first upstream section of he line.2. Plug the downstream end of the section to be soaked, using a pneumatic balloon of other

plug.3. One gallon of Root Bandit is added for every 200 gallons of water the sewer line section will

hold (the sewer line section must be filled to capacity with water so that Root Bandit willcome into contact with all root growth in the line and all joints). Allow Root Bandit toremain in line for 30 minutes to 1 hour, before releasing solution to the next section of thedrain line. 1 mixture of Root Bandit solution will work for 1000 feet of sewer line.

4. Determine the volume of water the sewer line section will hold by using the table below.For example: A section of 6” sewer line 200 feet long will require 300 gallons of water (200x 1.47 gallons of water per 1 for length). Since 1 gallon of Root Bandit is required for each200 gallons of water in the sewer line section, 1 ½ gallons of Root Bandit will be requiredto treat the 200-foot section holding 300 gallons of water.

SEWER PIPE CAPACITY PER FOOT ON LENGTHPipe Diameter Gallons of Water per 1 Foot Length

4 inches .656 inches 1.478 inches 2.6110 inches 4.112 inches 5.9

248

248

COPPER SULFATE SULUTION FOR SEWER SYSTEMS

• REMOVES TREE ROOTS FROM HOMESEWER LINES WITHOUT DAMAGE TOSEWAGE SYSTEM.

• REMOVES UNDESIRABLE SLIME,FUNGI, AND SYMBIOTIC ORGANISMSWHOSE GROWTH IS PROMOTED BYROOT OBSTRUCTIONS.

•• Helps Control Root Problems without Solvents or Mechanical Means•• Kills Roots in Lines without Harming Trunks and Foliage Trees•• Helps Eliminate Blockage and Backups Caused by Roots Entering Line through Tile Joints•• Ready-to-Use -- Highly Concentrated

The primary cause of sewer blockage is the invasion of the lines by tree roots that enterthrough small openings, such as pipe joints. A simple, inexpensive method of destroying theseroots safely is treat the connector lines with ROOT BANDIT, a stable, easy-to-handle materialhaving a salt radicle, making it mildly acidic. It is completely harmless to metallic, ceramic,porcelain, to terra cotta pipes, pipe lining, or other surfaces.

TO USE: Apply approximately 2 gallons of ROOT BANDIT, poured through manholes, seweraccess valves, drains, or toilets. Apply when sewer flow will be low or non-existent, as the lengthof time and amount of solution in contact with root obstruction increase effectiveness. Repeatapplication as needed, or if necessary. Preventative applications may be recommended,depending on continued root growth, and degree of obstruction. Will not harm trees when usedas directed.

CAUTION: in case of eye contact with solution, flush eyes immediately with water for at least15 minutes. Contact a physician immediately. If swallowed, drink large amounts of water,followed by milk, egg whites, or gelatin solution. Seek immediate medical attention.KEEP OUT OF REACH OF CHILDREN.

LYN DISTRIBUTING 965 No. Redwood Road North Salt Lake, Utah 84054Phone Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

249

249

RPD-400RPD-400RECLAIM PITRECLAIM PITDEODORIZERDEODORIZER

(Automotive Wash Bays)(Automotive Wash Bays)

RPD-400 is a highly active bactericide/ bacteriostat and fungistat. It can be usedas a preservative or deodorizer in large amounts of recycled water, in thetransportation industry. RPD-400 is miscible with soft or hard water ( 400ppmCaCo3) in all proportions, and is compatible with other anionics, cationics, andnonionics at the proper pH range of 7 – 12. RPD-400 will not contribute tocorrosion of metals.

RECOMMENDED USE: 16 – 32 ounces RPD-400 per 100 gallons of reclaimingpit capacity.

Caution: RPD-400 is slightly toxic orally and dermally and it causes mild eye andslight skin irritation in its concentrated form. This product is not mutagenic.Contains Hexahydro1,3,5 – Tris-s-triazine

LYN LYN DISTRIBUTING DISTRIBUTING 965 NO. REDWOOD 965 NO. REDWOOD ROAD NO. SALTROAD NO. SALT LAKE, UT.LAKE, UT.

PHONE SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022PHONE SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

250

250

EASY APPLICATION •• NONSTAINING WHEN USED AS DIRECTED ••QUICK DRYING •• REPELS DUST, DIRT & LINT

This product is a water-clear, nearly odorless solution designed to neutralize and retardformation of static electricity on rugs and carpets. Static electricity is generally developed incarpet fibers when humidity is low, particularly during fall and winter when furnaces areoperating. It can be very annoying, and around some of the newer electronic equipment such ascash registers and computers data may be lost due to malfunction of these devices.

Although not usually considered, great amounts of static electricity in carpet fibers can leadthem to retain dust and soil. Regular use of this liquid in all seasons can actually enhancevacuuming. This anti-stat product may also be used to treat upholstery and drapes where staticelectricity is a problem.

DIRECTIONS:For best results this product should be applied to freshly cleaned carpets or upholstery. At least vacuum

thoroughly. For large areas apply in a fine mist using a LYN Sprayer # E2103-2 (plastic pump-up sprayer 3gallon). For smaller areas use a trigger sprayer. (#Q3333-10) It may be sprayed on damp carpets. Rake up pileafter application. Coverage: 1000 square feet per gallon. Re-treat carpets as necessary using product straight orcut 1 to 1 with water to control static electricity. Use frequently during cold weather. Apply to upholstery with atrigger sprayer misting lightly. Brush fabric after application with a soft bristle brush or upholstery brush. Forcarpeting, hold spray wand upward so spray forms in an umbrella pattern, and let spray drift downward on carpetnap rather than spraying directly on carpeting. For plastic and vinyl furniture, spray lightly and remove any excesswith a clean, dry cloth. Do not wet or saturate upholstery and drapery fabrics or carpet pile or staining may result.Available in: 24 pints per case or 24 quarts per case • 6 – 1 gallon bottles per case • 6 gallon pail • 15 gallon drum•30 gallon drum or 55 gallon drum.


251

251

EASY APPLICATION •• NONSTAINING WHEN USED AS DIRECTED ••CONCENTRATED FOR ECONOMY •• QUICK DRYING •• REPELS DUST,

DIRT & LINTThis product is a concentrated water-clear, nearly odorless solution designed to neutralize

and retard formation of static electricity on rugs and carpets. Static electricity is generallydeveloped in carpet fibers when humidity is low, particularly during fall and winter when furnacesare operating. It can be very annoying, and around some of the newer electronic equipment suchas cash registers and computers data may be lost due to malfunction of these devices.

Although not usually considered, great amounts of static electricity in carpet fibers can leadthem to retain dust and soil. Regular use of this liquid in all seasons can actually enhancevacuuming. This anti-stat product may also be used to treat upholstery and drapes where staticelectricity is a problem.DIRECTIONS:

Dilute concentrate 1 part concentrate to 5 parts water - then use as follows. For best results this productshould be applied to freshly cleaned carpets or upholstery. At least vacuum thoroughly. For large areas apply in afine mist using a LYN Sprayer # E2103-2 (plastic pump-up sprayer 3 gallon). For smaller areas use a triggersprayer. (#Q3333-10) It may be sprayed on damp carpets. Rake up pile after application. Coverage: 1000 squarefeet per gallon. Re-treat carpets as necessary using product straight or cut 1 to 1 with water to control staticelectricity. Use frequently during cold weather. Apply to upholstery with a trigger sprayer misting lightly. Brushfabric after application with a soft bristle brush or upholstery brush. For carpeting, hold spray wand upward sospray forms in an umbrella pattern, and let spray drift downward on carpet nap rather than spraying directly oncarpeting. For plastic and vinyl furniture, spray lightly and remove any excess with a clean, dry cloth. Do not wetor saturate upholstery and drapery fabrics or carpet pile or staining may result.Available in: 24 pints per case or 24 quarts per case • 6 – 1 gallon bottles per case • 6 gallon pail • 15 gallon drum•30 gallon drum or 55 gallon drum.


252

252

Transparent Water SealFor Vertical Surfaces

• Keeps Wet Weather Out• Buildings Stay New-

Looking Longer• Concentrated - Diluted

With Water• May be Used on Sidewalks

•• Prolongs Life Of Building Surface as Water Has Difficulty Passing ThroughMasonry •• Minimizes Absorption of Soot and Dirt •• Protects against InteriorWater Damage •• Helps Prevent Cracking Caused by Freezing of PenetratingWater •• Effective within 4 Hours – Completely Cured in 24 HoursAREAS OF USE:

• Bricks• Sandstone• Limestone• Pre-cast stone• Ceramics• Concrete• Wallboard

• Long life last 7 to 12 years with little change in water repellency• Concentrated - dilutes 1 gallon to 13 gallon of water• May be used on concrete sidewalks and drives to increase

durability by improving resistance to effects of freeze-thawexposure – heavy traffic areas need to be treated every 3 to 5 years

• Reacts with carbon dioxide in the air to form an insolublewater-resistant resin within 24 hours

Easy to use- No expensive equipment is required. Simply spray on with a pump-up type sprayer or brush onsurface with a heavy wet coating. When diluting this product be sure to dilute properly – do not use at dilutionratio stronger than directed. Surfaces to receive the water soluble silicone treatment should be lightly dampenedimmediately prior to application. This methyl siliconate water repellency product is 40 –45 percent active in itsconcentrated form and should be used at 3% active material. Dilute 1 gallon concentrate with 13 gallon waterthen apply to a damp surface. Cover vegetation or other articles to protect from over spray. Keep off glass,plastic, aluminum and most metals. If contact does occur, wash immediately with water. Due to the highsolvent resistance of the cured material, Weather Guard that has dried on glass must be scraped, and othersurfaces may require sand blasting. This product shows little change in water and stain repellency over a 5 to 10year period.


253

253

CRYSTAL PLUS OIL 350FG

Crystal Plus Oil is an odorless, tasteless, crystal clear, food-grade white mineral oil of thehighest quality. This oil meets or exceeds requirements of US FDA regulation 21 CFR172.878. This oil also meets USDA requirements for H-1 lubricants for indirect food contactand 3-H lubricants for direct food contact.

Features• Excellent lubricity• Economical for users who require white oils,• Variable viscosities available upon request

Applications• Lubricant for drawing, stamping, forming and rolling of aluminum foil

used in food packaging• Fiber lubricant for textile fibers/fabric used to process food• Plasticizer for rubber used on conveyor belts; also used in hoses, rollers,

etc.• De-foamer in manufacturing of paper and adhesives intended for food

packaging• Lubricant cleaner and rust preventative for food machinery and other

equipment where the lubricant might incidentally come in contact withfood

• Component of animal feed to reduce dusting and enhance appearance indry feeds and mineral supplements. Up to 3.0 percent in mineralsupplements and to 0.06 percent maximum in finish feed

TypicalProperties

ASTM TestMethods

350

Gravity, ºAPI D287 31.0Specific Gravity @25ºC

D1298 .863

Viscosity, SUS @100ºF

D2161 350

Viscosity, cST.@40ºC

D445 68.5

Pour Point, ºF D97 +15Color, Saybolt D156 +30Flash Point, COCºF D92 445

Note: The oil above is colorless, odorless, and tasteless and surpasses requirements of FDA and US Pharmacopeiastandards for Neutrality, Sulfur Compounds Solid Parafins and Carbonizable Substances.

Consult the Material Safety Data Sheet (MSDS) for safety and handling information. To obtain and MSDS, call (512) 396-3399 ext 24.

254

254

Quick Change Dust Mop FramesLyn Distributing chromed heavy-duty industry standard dust mopframes with 5" width and 24", 36", 42", 48", 60", 72" length. UsesQuick Change Handle.

Quick Change Dust Mop HandlesStandard or heavy-duty 60" swivel snap hardwood or fiberglass handlehas quick change thumb release to change mops easily. Sold separatelyfrom quick change frames.

Breakaway Frames for Dust MopsSpecially designed collapsible frame "Breaks" in the middle for easyrelease of soiled dust mops. Mop common in the rental mop industry.Available in 36" and 48" length and 5" width.

Laundry Net BagsHeavy duty knitted 100% polyester nets with laced draw cord plasticclosure. Strongly recommended for all mop laundering to preventtangles and extend mop life. Available in 15" x 20" or 18" x 30".

Dust Mop Frame & HandleIncludes standard 1" x 60" hardwood handle along with combinationswivel/wing nut locked style frame 5" width and 24", 36", 48", 60", or72" length.

Rotary Bonnets for CarpetHigh Profiled designed for efficient shampooing or spot cleaning of allcarpets, including deep pile. Excellent also for buffing natural woodfloors. Our dura-lon yarn is sewn on white nylon mesh backing. Usewith any standard floor machine. Sizes available 15", 17", 19",diameters.

Rotary Bonnets with ScrubbersMedium Profiled with green scrubbing strips designed for efficientshampooing or spot cleaning of all of medium to dense carpets. Doubleface, tightly woven, looped bonnet keeps it shape after repeated use andlaundering. Use with any standard floor machine. Sizes available 15",17", 19", diameters

Lyn Distributing 965 North Redwood Road North Salt Lake, Utah 84054Phone in Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

255

255

Closed End Wet MopsHigh Performance, Long Lasting, Cost Effective Mops

The step-up mop that almost makes the cut end style obsolete.Last three to five times longer than cut end mops.

Available in Cotton or Synthetic Blend Yarn. With/Without Fan BandAvailable in: Small, Medium, or Large.

Disposable Dust MopOur disposable dust mop come pre-treated and polybagged. This disposable dust mop will dust up to1,000,000 square feet. Brush out dirt and grime then re-treat and use over and over. These mops pick up more dustand dirt than laundered mops because of the material type.They are not made to laundered. Available in 24", 36",42", 48", 60", and 72". Made to be used with 5" wideframes.

Launderable Cotton Dust MopLaunderable natural color cotton yarn and preshrunkcanvas backing is very durable and will readily accept userapplied mop treatment. Available in 24", 36", 42", 48", 60",and 72". Made to be used with 5" wide frames.

Floor Finish Flat MopTested and Perfected by Floor Care Professionals.Unsurpassed performance improves operator productivityby 50% vs. traditional finish mops. Controlled-even-coating means thinner coats, faster drying time and lesswasted finish with reduced operator fatigue. Inexperiencedoperators leave a smooth floor, no unsightly bubbles.Made with white no-lint monofilament yarn that glidessmoothly and evenly. Available in 5" Width, and 24" or36" length.

256

256

Metal Case Rayon or Cotton Mop

A metal stud protrudes from the top of the mop head and handle screws on.Allows for mop to lay flat. 4-ply rayon, lint free for damp mopping orapplying finish. Size #32,#24. SOLD BY: each.

A metal stud protrudes from the top of the mop head and handle screws on.Allows for mop to lay flat. 4-ply cotton, low lint for damp mopping. Size#32,#24. SOLD BY: each.

This Rayon cut end wet mop is made of a 4-ply rayon yarn. Clean white,lint-free yarn for damp mopping and applying floor finish. Available withfan band. Sold by: each. Size #32, #24, 32oz. 24oz. 16oz.

This Cotton cut end wet mop is made of a 4-ply cotton yarn. Clean white,low lint yarn for damp mopping. Available with fan band. Sold by: each. .Size #32, #24, 32oz. 24oz. 16oz

Looped End Wet MopDurable looped end wet mop of cotton-synthetic blended yarn. Goodperformance at a good price. Not pre-shrunk Launder with care. Soldby the each. . Size: X-Large, Large, or Medium.

Rayon or CottonCut End Mops With Or Without Fan End


257

257

Closed End Wet MopsHigh Performance, Long Lasting, Cost Effective Mops

The step-up mop that almost makes the cut end style obsolete.Last three to five times longer than cut end mops.

Available in Cotton or Synthetic Blend Yarn. With/Without Fan BandAvailable in: Small, Medium, or Large.

Disposable Dust MopOur disposable dust mop come pre-treated and polybagged. This disposable dust mop will dust up to1,000,000 square feet. Brush out dirt and grime then re-treat and use over and over. These mops pick up more dustand dirt than laundered mops because of the material type.They are not made to laundered. Available in 24", 36",42", 48", 60", and 72". Made to be used with 5" wideframes.

Launderable Cotton Dust MopLaunderable natural color cotton yarn and preshrunkcanvas backing is very durable and will readily accept userapplied mop treatment. Available in 24", 36", 42", 48", 60",and 72". Made to be used with 5" wide frames.

Floor Finish Flat MopTested and Perfected by Floor Care Professionals.Unsurpassed performance improves operator productivityby 50% vs. traditional finish mops. Controlled-even-coating means thinner coats, faster drying time and lesswasted finish with reduced operator fatigue. Inexperiencedoperators leave a smooth floor, no unsightly bubbles.Made with white no-lint monofilament yarn that glidessmoothly and evenly. Available in 5" Width, and 24" or36" length.

258

258

Quick Change Dust Mop FramesLyn Distributing chromed heavy-duty industry standard dustmop frames with 5" width and 24", 36", 42", 48", 60", 72"length. Uses Quick Change Handle.

Quick Change Dust Mop HandlesStandard or heavy-duty 60" swivel snap hardwood or fiberglasshandle has quick change thumb release to change mops easily.Sold separately from quick change frames.

Breakaway Frames for Dust MopsSpecially designed collapsible frame "Breaks" in the middle foreasy release of soiled dust mops. Mop common in the rentalmop industry. Available in 36" and 48" length and 5" width.

Laundry Net BagsHeavy duty knitted 100% polyester nets with laced draw cordplastic closure. Strongly recommended for all mop launderingto prevent tangles and extend mop life. Available in 15" x 20"or 18" x 30".

Dust Mop Frame & HandleIncludes standard 1" x 60" hardwood handle along withcombination swivel/wing nut locked style frame 5" width and24", 36", 48", 60", or 72" length.

Rotary Bonnets for CarpetHigh Profiled designed for efficient shampooing or spotcleaning of all carpets, including deep pile. Excellent also forbuffing natural wood floors. Our dura-lon yarn is sewn onwhite nylon mesh backing. Use with any standard floormachine. Sizes available 15", 17", 19", diameters.

Rotary Bonnets with ScrubbersMedium Profiled with green scrubbing strips designed forefficient shampooing or spot cleaning of all of medium to densecarpets. Double face, tightly woven, looped bonnet keeps itshape after repeated use and laundering. Use with any standardfloor machine. Sizes available 15", 17", 19", diameters


259

259

THE RIGHT PAD FOR THE JOB

POLISHINGWHITE - REGULAR MACHINE POLISHINGTAN - REGULAR MACHINE POLISH &CLEANINGRED-REGULAR MACHINE SPRAYCLEANING & POLISHINGSUPER RUBBERIZED WHITE- FOR HIGHSPEED POLISHING OVER 1200 RPMGORILLA- HIGH SPEED POLISH SPRAYBUFFING2001 NATURAL PAD - FOR HIGH SPEEDBURNISHING OVER 2000 RPM BONDED PAD

SCRUBBING & CLEANINGBLUE- WET SCRUBBING & CLEANINGHEAVIER THAN RED PADGREEN- HEAVY DUTY WET SCRUBBINGAND LIGHT STRIPPING

STRIPPINGBLACK - WET STRIPPING OF FLOORSBROWN - DRY STRIPPING OF FLOORSRAZORBACK H P BLACK - HEAVY DUTYSTRIPPING PAD HIGH PRODUCTIVE - WILLSTRIP MULTIPLE LAYERS OF FINISH

2001 PAD - NATURAL FIBER HOG HAIR PAD BONDEDIN THE MIDDLE FOR ADDED STRENGTH AT SUPERHIGH SPEEDS (2000 - 3000 RPM).

PAD SIZE FOR ALL PADS - 13", 15",17", 20".

#C89-6 Scour Sponge 3 1/2" X 6 1/2" X 1" thick is a medium duty scour padlaminated to an absorbent cellulose sponge. Each sponge is sealed in clear plastic.Green scrub pad on sponge.

#C414-6 Cleaning Sponge Sponge 3 1/2" X 6 1/2" X 1" thick is a light duty scourpad laminated to an absorbent cellulose sponge. Each sponge is sealed in clearplastic. White scrub pad on sponge.

260

260

#C90-6 ..Green general purpose, medium duty, hand pad. It has enoughabrasive strength for cleaning floors and kitchen equipment. 10 each Per box / 60per case. Size 6" X 9" X 1/4"

#C106-6 Black heavy duty hand pad. It has tough abrasive strength for cleaningfloors and kitchen equipment or anything that calls for extra abrasive action. 10each Per box / 60 per case. . Size 6" X 9" X 1/4"

#C104-6 Black Razorback hand pad. It has super abrasive strength for cleaningfloors, baseboards and kitchen equipment or anything that calls for extra abrasiveaction. Open weave construction holds extra loads when used. 10 each Per box /40 per case. . Size 4 3/8" X 10" X 3/8"

#C200-6 Swivel Scrub Pad Holder this pad holder is designed to save youfrom having to stoop over to clean baseboards or floors, and you don't have toclimb a ladder to reach walls or ceilings. Use any standard threaded handle. Usewith scrub pads or wall washing pads.

#C201-6 Hand Scrub Pad Holder this pad holder is designed to give youmore leverage than a handle swivel type pad holder. Use to clean baseboards,walls, floors, counters, and equipment. Use with scrub pads or wall washing pads.

#C101-6 Brown Pad for Heavy-duty cleaning, stripping. Use with abovepad holders. 5 Per Box / 20 Per case Size 4 3/8" X 10" X 1".#C102-6 Blue Pad for Medium-duty cleaning & scrubbing. Use with abovepad holders. 5 Per Box / 20 Per case Size 4 3/8" X 10" X 1".#C103-6 White Pad for Delicate Surface cleaning or polishing. Use withabove pad holders. 5 Per Box / 20 Per case Size 4 3/8" X 10" X 1".

#SW-R-6 Steelwool Roll-5 lb. Rolls of steelwool for use on any surface that needsabrasive cleaning. #O for fine abrasion #1 or #2 for heavier abrasion.

#SW0, #SW2, #SW3 Steelwool Scrub Pads for buffers. Cleaning & dry scrubbing. Padis thick & fluffy for high absorbency & minimum clog-up. Heavier than most by 25% to 30%.#0 is fine scrub, #2 heavier scrub, #3 heaviest abrasion. Size 17" or 20" round. 10 per case.

#C5550-6 Stainless Steel Scrub pads or sponge. Used for heavy duty scrubbing onequipment, pans, machinery. Package each.

#C2310,14,18,24-6 Lambs Wool Applicator. Comes complete with wood block andhandle with 1 each lambs wool pad. 10", 14", 18", 24" width. Replacement pads are available.Used to apply floor wax, floor seals (Urethane or Epoxy) or paints.

#C3110,14,18,24-6 Lambs Wool Replacement Pads. Replacement pads forapplicator above 6" wide by 10"14"18"or24" long pads. Package each.

Lyn Distributing 965 North Redwood Road North Salt Lake, Utah 84054Phone in Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022We serve areas all over the U.S.A.

261

261

SCREEN DISCSOr

Sanding Screens

60 GRIT - EXTREMELY COARSE80 GRIT-COARSE100 GRIT- MEDIUM120 GRIT- FINE150 GRIT- MEDIUM FINE180 GRIT- VERY FINE220 GRIT- SUPER FINE

Screen discs are used primarily on hardwood orconcrete floors. The discs sand down the oldfinish so that new finish can be applied. This isknown as the "scour method" of refinishing a floorand is most often used on gym floors, shop orwarehouse floors. Our discs are manufacturedwith waterproof resins & silicon carbide abrasive,assuring you of the finest quality you can buy.

SIZES 16", 18", 20".

LYN DISTRIBUTING: SERVING DENVER, PORTLAND, CHICAGO, DALLAS,HOUSTON, SALT LAKE CITY, LOS ANGLES, PHOENIX, SACRAMENTO, OMAHA,TULSA, BOISE, TAMPA. PHONE 1-800-366-5022

262

262

1-1407 Red Iron 1-1411 Aluminum 1-1412 Flat White 1-1413 Gloss White 1-1415 Gloss 1-1417 Dark 1-1418 LightOxide Primer Safety Black Machinery Gray Machinery Gray

ANSI 4

1-1419 Safety 1-423 Safety Red 1-1427 Safety Blue 1-1431 Lt. Gray 1-1433 Flat Black 1-1443 Equipment 1-1445 ColdYellow Primer Yellow Galvanizing Compound

1-1451 Safety 1-1452 SafetyOrange Green

INDUSTRIALCOATINGS

MaintenanceRepairOperations

MRO Maintenance Enamel

Seymour’s MRO is a high solids,Industrial metal protective coating of thehighest quality. It has been specificallydeveloped for protection and decoration ofmetal exposed to industrial and highlyhumid environments. This durable, highgloss coating is used for interior and exteriorprotection of steel, aluminum, wood andmost masonry. MRO enamel provides a corrosionresistant coating for maintenance andmachinery painting in any industrialapplication. In situations where long-termpaint life is expected, such as use on heavycapital structures, it meets the challengebecause of its quality, high solidsperformance. Available in a full range of popularindustrial colors that contains polyurethanewhich enhances the integrity of the paintfilm.

MRO has been tested and proven as a superior protective coating in the following exposures:

Weather Resistance: Excellent gloss and Abrasion Resistance: Very Goodcolor retention under normal weather conditions.

Water and Humidity: Withstands high Heat Resistance: Up to 250° F. dryhumidity and splash and spray. Not (121° C.).recommended for continuous immersion.

Ordering: Available in one and five gallon containers and 55 gallon drums.Suggested Uses:• blowers • benches • lift trucks • machinery • metal furniture • racks • fire doors •sprinkler systems • steel sash • gas meters • hand trucks • bins • dadoes • motors •elevators • lathes • tanks • mill shop equipment • hoists • boxes • drums • dustconveyors • piping • trash containers • fire escapes • stanchions • ventilators


OSHA SAFETY COLORSNOTE: Actual colors may vary in shade from color shown here since colors are inreproductionsSpecial colors made in 50 gallon batches

263

263

UNIQUE HIGH SOLIDS, LOW SOLVENT FORMULATION TO HIDE, COVER AND PROTECT

BETTER THAN ANY OTHER AEROSOL ON THE MARKET.

Best in Coverage and Hide

Sub-tropic testing. The panels above show MRO’s good color retention (compared to a standard industrial enamel) after one year of severe weathering in Florida. Tests were performed by an independent testing laboratory. Painted steel panels were placed on a test fence at 45 southern exposure. This test measures resistance to the ultraviolet sun rays that cause many paints to fade and lose gloss.

Protects against weather, rust, oil gasoline, corrosive chemicals and rough service

Does not contain lead, CFC’s, chromates or chlorinated solvents

Environmentally safer- Meets

the most stringent air quality requirements in the U.S.A.

Best in Corrosion Resistance

Independent testing. Corrosion resistance testing of nationally distributed products was conducted by an independent laboratory. Painted panels were exposed for 150 hours at 100F to a 5% salt solution, in accordance with ASTM Test Method B117. As shown above, the amount of blistering, scaling or rust evident under the paint is minimal with Seymour proving that MRO paint protects metal best.

√ High solids formulation delivers single-coat hiding power. √ Using fewer cans of MRO saves you time and money.

264

264

Stripe Traffic Marker is formulated to apply with the Stripe Marking Machine. It's the easy way to stripe parking lots, plants, warehouses, athletic fields and other sites where traffic control is required. Designed for use on all surfaces including concrete, blacktop, gravel, dirt and grass. Stripe Marking Paint is heavily pigmented for long lasting, one-coat coverage yielding a clean, crisp line up to 4" wide when applied with the Stripe Marking machine. The non-clogging formula is formulated with water for greater safety, but the paint is not soluble in water and will not wash away. The unique spray head is designed for exclusive use with the Stripe Marking Machine.

One-pass coverage Bright vivid stripes Contains water, lower flammability Non-clogging Long lasting-Not water soluble Stripe Marking Machine # Z-604-10 (pictured above) The new stripe marking machine is the most versatile applicator available. It comes ready to use and there are no accessories to buy. Just set the simple adjustment for stripe widths from 2" to 4" and apply sharp, even lines every time.

Water-base formula Safe for grass Will not wash away

Lyn Distributing 965 North Redwood Road North Salt Lake, Utah 84054 Phone Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022 Page 89

COLORS AVAILABLE # P20-642-3 Traffic White # P20-646-3 Traffic Yellow # P20-647-3 Red # P20-648-3 Handicap Blue

# Z-500-3 Parking Lot Stencil Kit

These giant stencils give you the most used symbols and lettering for a professional layout. Contains five reusable boards for marking traffic control and handicap parking

265

265

MRO INDUSTRIAL ENAMEL

TYPE: High Solids Alkyd

COMPONENTS: One

COLORS: White, Black, ANSI 49 & 70, Cold Galvanizingand OSHA Safety colors

FLASH POINT: 104° F. (40° C.)

SOLIDS BY WEIGHT: 65% (approximately)

VOC: 3.5 lb/gal

DENSITY: 9 lbs. per gallon (approximately)

RECOMMENDED FILM THICKNESS: 3 to 4 mils wet1 to 2 mils dry

SPREADING RATE: 400 –500 feet per gallon

STORAGE: Above 50° F.

MIXING: Mix well before use to insure proper pigment dispersion

SHELF LIFE: 1 year

PRIMERS: Use MRO primers

VISCOSITY: 78 – 83 KU

SURFACE PREPARATION: Properly primed surface should be free of dirt, oil,moisture, grease and other contaminants

APPLICATION: Apply with a brush, roller or spray. DO NOTAPPLY WHEN AIR OR SURFACE TEMPERATURES AREBELOW 50° F. OR ABOVE 90° F. Airless spray shoulduse .015 orifice and equipment operating at a fluidpressure or 2100 – 2400 PSI. Rollers should be ¼ “ to 3/8”nap and made from lambs wool or synthetic material.Brushes should be natural bristle. Apply 400 to 450square feet per gallon on smooth, sealed surfaces.Apply material with a flowing motion with no overbrushing or rolling.

THINNING: Mix thoroughly before using. Thinning is notrecommended, but if necessary, thin with mineral spiritsfor brush and roll application and VM&P Naptha forspray (approximately 6:1)

CLEAN UP: Clean up spills and spatters immediately. Cleanpainting tools with mineral spirits. Followmanufacturer’s recommendations for thorough sprayequipment maintenance.

DRY TIME: 4 to 6 hours. Overnight to recoat

TYPE OF CURE: Oxidation

ENVIRONMENTAL CONCERNS: This product complies with all Federal requirementsand is free of lead, mercury and formaldehyde. Driedpaint is safe for all areas where children are present.

266

266

Specifications:

Each SCRUBS® bucket contains 72 - 10.5" x 12.25" perforated high strength

absorbent cleaning towels. 6 Buckets per Case

When hands are really soiled, and there isn't any soap... and there isn't any water... regardless of place, time or location... no

matter what the soils are.

What are they? How do they work? Rough Touch® SCRUBS are a unique patented waterless hand-cleaning system combining both a high quality, liquid hand cleaner formula, and a heavy-duty, non-scratching, abrasive hand-cleaning towel. Who uses SCRUBS®? And where? Rough Touch® SCRUBS are essential for mechanics, painters, printers, silk screeners, machinists, glaziers, plumbers, and many more. Item # TFHC422-10

Lyn Distributing 965 North Redwood Road North Salt Lake, Utah 84054 Phone 801-295-5022 Out Side of Salt Lake Area 1-800-366-5022

Web Address www.lyndist.com

267

267

Item # TFH198-10 Toilet Tissue 2 Ply 500 Sheets Per Roll 96 Rolls Per Case. Size 4" Wide X 4 1/2" Length Per Sheet. White Item # P109500-10 Toilet Tissue 2 Ply 500 Sheets Per Roll 96 Rolls Per Case. Size 4 1/2" Wide X 4 1/2" Length Per Sheet Acclaim Brand. White Item # TFH145-10 Toilet Tissue 1 Ply 1000 Sheets Per Roll 96 Rolls Per Case. Size 4 1/2" Wide X 4 1/2" Length Per Sheet FORT JAMES Brand. White Item # TFH160-10 Toilet Tissue 2 Ply Folded 750 Sheets Per Pack/80 Pack Per Case. Size 4" Wide X 5 1/2" Length Per Sheet Fort James Brand. White

Item # JT550100-10 Toilet Tissue 2 Ply 1000' Roll 12 Rolls Per Case 9" Roll is Equal to 6 to 10 Rolls of Regular Tissue 2 Ply (4.5" X 500 Sheets or 4" X 300 Sheets). WHITE LABOR SAVER Item # TFH13501-10 Toilet Tissue 1 Ply 2000' Roll 12 Rolls Per Case 9" Roll is Equal to 6 to 10 Rolls of Regular Tissue 1 Ply (4.5" X 1000 Sheets or 4" X 600 Sheets). WHITE LABOR SAVER Item # TWIN680-10 Toilet Tissue 2 Ply 1000' Roll 12 Rolls Per Case 9" Roll is Equal to 6 to 10 Rolls of Regular Tissue 2 Ply (4.5" X 500 Sheets or 4" X 300 Sheets). WHITE. EMBOSSED FOR SOFT FEEL. LABOR SAVER

WHITE OR Bleached Roll Towels Item # RTHW800-10 Bleached /Roll Towel 8" wide X 800' length 12/Case. 9600' of Roll Towel Per Case. Quality High Virgin LABOR SAVER

Item # RTHWWHI31252-10 Bleached /Roll Towel 8" wide X 800' length 6/Case. 4800' of Roll Towel Per Case. Quality High Recycled LABOR SAVER

Item # TFH28705-10 White /Roll Towel 8" wide X 350' length 12/Case. 4200' of Roll Towel Per Case. Quality Medium #1220

Item # RT402306-10 White /Roll Towel 8" wide X 800' length 6/Case. 5280' of Roll Towel Per Case. Quality Medium LABOR SAVER

Natural Or Tan Roll Towels Item # RTHW800N-10 Natural / Roll Towel 8" wide X 800' length 12/Case. 9600' of Roll Towel Per Case. Quality Medium LABOR SAVER

Item # RT405506-10 Natural /Roll Towel 8" wide X 800' length 6/Case. 4800' of Roll Towel Per Case. Quality Medium LABOR SAVER #1341

Item # RT405320-10 Natural /Roll Towel 8" wide X 400' length 12/Case. 4800' of Roll Towel Per Case. Quality Medium

LYN DISTRIBUTING 965 No. Redwood Road North Salt Lake, Utah 84054 Phone Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

268

268

C Fold Hand Towels Recycled minimum 40 percent post consumer paper EPA Compliant for recycled content in paper towels One PLY towels 13.3 x 10.4 sheet size Embossed. White Paper 12 Packs per Case 200 Towels per Pack

Blue Single fold towels for convenient way to clean windshields. Blue color appealing to the eye. Can also be used for general purpose. Windshield Towels, 9-1/10” X 10_1/4”, One Ply. Application: Windshields; Applicable Material: Glass; Dairy towels, Oil check towels for auto service stations. Pack Includes 10 packs of 224 wipers per case.

Multifold Hand Towels Recycled minimum 40 percent post consumer paper EPA Compliant for recycled content in paper towels. One PLY towels 9 x 9 sheet size Absorbency pockets. White 12 Packs per Case 334 Towels per Pack 4008 towels per case.

Multifold Hand Towels 1 Ply 9 1/2 x 9 1/8 sheet size. Brown Paper EPA Compliant for recycled content in paper towels. 250 Towels per Pack 16 Packs per Case 4000 towels total.

Center Flow Hand Towels Provide protection against cross contamination. Users touch only the hand towel they'll use. White perforated at 11.8” X 8, 590 sheets. One ply 8” roll diameter. 6 Rolls per Case 590 Towels per Roll.

269

269

Presto-Wipes The leading choice for all-purpose wiping

AIRLAID TECHNOLOGY q Highly absorbent q Superior Oil and Grease clean up q Ideal for all types of liquid clean up q Soft, Bulky fabric q Low linting q Replaces many wipes with one q Eliminates need for rental shop towels q Different strengths for different uses q 100 per box / 8 boxes per case

Item # W6780-10

Wipers Airlaid for soft touch

Or Scrim Reinforcement for strength

Tuff-Job Wipes Multi-ply paper wipes reinforced with polyester

webbing for extra strength and durability q Highly sbsorbent q Durable q Superior wipe dry q Low lint q Environmentally friendly Scrim reinforcement gives extra strength for tough wiping jobs. Premium 4-ply for economy and value Leaves surfaces streak free Item # W420N-10

Blue Dairy/Windshield Towel q Used for cleaning cow teats q Used for dipstick wiper for oil change q Ideal for cleaning windshield, mirrors &

headlights q 2 ply Blue 140 wipers/pack 16 packs/case Item # TFH293-90-10

Supreme Wiper q Exceptional durability for long life q Low lint & high absorbency q Solvent resistant & repeated use q Blue color show less dirt q 1000 per case Item # W900-10 Item # W 898-10

Lyn Distributing 965 North Redwood Road North Salt Lake, Utah 84054 Phone 801-295-5022 Fax 801-295-5044 Web www.lyndist.com Outside SLC 1-800-366-5022

270

270

CCCCOOOONNNNDDDDIIIITTTTIIIIOOOONNNN----AAAALLLLLLLLProtective Barrier & ConditionerProtective Barrier & Conditioner

Restores Luster - Enhances AppeaRestores Luster - Enhances AppearranceanceProtects Against Further DamageProtects Against Further Damage

FOR VINYL, LEATHER, PLASTIC, WOOD, METAL,FOR VINYL, LEATHER, PLASTIC, WOOD, METAL,RUBBER, AND MANY OTHER SURFACESRUBBER, AND MANY OTHER SURFACES

This premium silicone emulsion treatment conditions surfaces and pro-tects against checking, dulling cracking, sun fading, hardening, deteriorationand aging. Condition-all renews the original finish and restores “ like new”luster to most any surface, with anti-soil and anti-static agents to repel dirtand dust, to keep surfaces looking their best. This formula is odorless, non-toxic, and non-corrosive, and contains no harmful solvents.

DIRECTIONS: Spray onto surface to be treated, and spread evenly witha cloth. Allow to penetrate several minutes, then buff dry with a clean cloth.To renew weathered or damaged surfaces, three applications are recom-mended as an initial treatment. Then maintain the finish as needed.

This product is available in a super concentrate that can be diluted withwater 1 part concentrate to 3 to 5 parts water. (Condition-all concentrate )

LYN DISTRIBUTING 965 No. Redwood Road No. Salt Lake, Ut. 84054Phone Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

271

271

CONDITION-ALL Super Concentrate (Dilute with water 1 part concentrate to 3-5 parts water)

Protective Barrier & Conditioner Restores Luster - Enhances Appearance

Protects Against Further Damage

FOR VINYL, LEATHER, PLASTIC, WOOD, METAL, RUBBER, AND MANY OTHER

SURFACES DIRECTIONS: This product is a super concentrate that must be diluted with water 1 part concentrate to 3 to 5 parts water. (Condition-all concentrate ) This product saves space. After product is diluted spray onto surface to be treated, and spread evenly with a cloth. Allow to penetrate several minutes, then buff dry with a clean cloth. To renew weathered or damaged surfaces, three applications are recommended as an initial treatment. Then maintain the finish as needed. CAUTION: Harmful or fatal if swallowed. Keep container well sealed when not in use to avoid contamination. If ingested, do not induce vomiting, contact physician immediately. LYN DISTRIBUTING 965 No. Redwood Road No. Salt Lake, Ut. 84054 Phone Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

272

272

Gloss Rubber Tire and Mat Dressing does not contain Silicone and leaves rubber looking like new without the shine that silicone based dressing leave. Gloss is not slippery when used like silicone tire and vinyl dressing. Made to not mess up paint shops because of silicone residue. This highly concentrated quick drying rubber dressing is recommended for renewing the appearance of tires, floor mats, and other rubber and plastic trim used on automobiles and trucks. It provides a temporary waterproofing to these surfaces which will not wash off in rain or with water alone. Directions For Use: The concentrated rubber dressing may be applied as received, undiluted for maximum luster, or diluted with 1 parts water for economy. Surface to be treated with rubber dressing should be cleaned and degreased with a good, industrial strength product, rinsed well with clear water, and allowed to dry completely. Apply product with a trigger sprayer, pump-up sprayer, or a sponge. Allow to air dry. Repeat procedure for darker color look. CAUTION: Protect product from freezing. Do not ingest. If this does occur, drink large volumes of water. For eye or skin contact, flush area with clear water for 15 minutes. Keep container sealed when not in use to prevent contamination. Rinse empty container before discarding in an authorized landfill site. Keep out of the reach of children, Do not ingest. FOR INDUSTRIAL & INSTITUTIONAL USE ONLY

Safe on Floor Mats

Not Slippery

Get in and out of Vehicles without Falling

Leaves Tires Looking

Like New, Not Spray Shined

NonFlammable Water Based Safe to Use!

Lyn Distributing 965 North Redwood Road North Salt Lake, Utah 84054 Phone 1-801-295-5022

273

273

LEMON SPRAYPOLISH

FOR DUSTING, CLEANING, ANDWAXING FINE WOOD ANDFURNITURE!

This rich lemon oil polish is a special blend of wetting agents, waxes, oils, andfresh fragrance. This combination or ingredients provides maximum protection and gloss.When used as directed with normal dusting you can more thoroughly clean, apply a fingermark resistant surface and deodorize all in one step.

This polish will not buildup to hide the beauty of furniture or appliances. It containsno harsh ingredients which might irritate sensitive skin or be damaging to surfaces. Thisproduct is a rich oil and silicone blend that will clean and protect many surfaces.

Use as directed to clean and polish furniture, woodwork, appliances, paneling,office equipment, leather, vinyl, ceramics, stainless steel, or plastic surfaces

DIRECTIONS FOR USE:1. Shake well before using.2. Fill spray bottle and lightly mist on surface, or apply directly to a clean soft cloth

and wipe on surface, this will clean and polish most furnishings.3. If desired wipe off to leave a light amount of protection on surface. This product

will stop fine woods from drying with age.

CAUTION- Do not use on floors and do not allow mist to fall on floors.

PROPERTIES:COLOR………………BRIGHT YELLOW LIQUIDODOR………………..FRESH LEMONDENSITY…………….7.6 LBS. / GALLON

PACKAGING:6 X 1 GALLON BOTTLES PER CASE6 GALLON HEADPACK WITH FAUCET30 OR 55 GALLON DRUMS.

LYN DISTRIBUTING 965 NO. REDWOOD ROAD, NO. SALT LAKE, UT.PHONE 801-295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

274

274

NU-LOOKTIRE RENOVATOR

KEEPS TIRES LOOKING NEW

NU-LOOK IS THE EASY-TO USE WAY TO KEEP TIRESLOOKING NEW AND BEAUTIFUL IN ONE EASY STEP.JUST SPRAY IT ON AND THAT’S ALL IT TAKES TO KEEPYOUR TIRES LOOKING GREAT. NO WIPING, TOUCHING, ORMESSY RAGS REQUIRED!

Nu-look penetrates rubber to protect from cracking and fading.Safe to use on wheels and wheel covers of all types. Nu-look isexcellent for other rubber surfaces such as bumpers, mud flaps,and trim. We recommend cleaning tires before application, butthis is not mandatory. (allow tires to dry after cleaning beforeapplying NU-LOOK) On higher gloss finishes, buff with a cleancloth to give maximum luster.If applying on molding around glass, wipe off glass or windshieldafter applying to prevent smearing.

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE, UT.PHONE (801) 295-5022 OUTSIDE SALT LAKE AREA 1 (800) 366-5022

275

275

PRISM FoamingAuto wax & coatingconcentrate!

This foaming concentrated wax and beading agent is used in thefinal rinse cycle of automatic car washes. This product willproduce a rich colored foam wax when used through a foamgenerating rinse arch. Prism is non-staining and may be used onany color automobile. Prism contains water beading agents,surfactants and finish protectors. Prism makes water run off thefinish for faster spot-free drying, and helps to resist furthersoiling to keep the paint and chrome finish looking better, longer.This highly concentrated product gives the gloss appearance thecustomer desires in a convenient economical form.

Directions: Dilute Prism with 10 - 30 parts soft water. Run thisdiluted solution into the air generating arch that applies the rinseand wax additive. Be sure to apply to a clean surface to allow theprotective coating to adhere to the automotive surface.

Caution: Contains petroleum distillates. Do not ingest, If thisdoes occur, do not induce vomiting. Contact physicianimmediately. For eye or skin contact flush area with clear waterfor 10 minutes. Keep container sealed when not in use.

Lyn Distributing 965 No. Redwood Road No. Salt Lake, Utah 84054Phone 295-5022 Outside Salt Lake Area 1-800-366-5022

276

276

RED SHEATER PREMIUMSUPER CONCENTRATED CHEATER WAX

PROVIDES FAST DRYING , HIGH BEADINGACTION AND PROTECTION ON ALL AUTOMOTIVE

SURFACES!

This concentrated product says stable in both concentrated and in the diluted form. This will give the customer a consistent uniform coverage of the automotive surface. This product should be diluted 1 part concentrate to 10 parts water then inject about 4-6 ounces of the diluted wax through a dispensing system onto a car surface. RED SHEATER contains special non-polar hydrophobes to make it a spectacular rinse aid and surface protector. Use this product along with Lyn Distributing’s other automotive products to clean and protect your automotive surfaces in a cost effective program.

Contains petroleum based products, cationic and nonionic emulsifiers and waxes.

Keep out of reach of children. For industrial use only.

L Y N D ISTRIBUTING L Y N D ISTRIBUTING 965 No. Redwood Road. No. Salt Lake, Utah Phone 295-5022 Outside Salt Lake Area 1-800-366-5022

277

277

• Cleaner & Protector• Preserves• Resists Re-Soiling• Restores Original Brightness• Pleasant Odor• Easy To Use

USES• Restaurants & Food Processing

Equipment• Hospital & all Medical

Equipment• Laundry Equipment• Elevators• Counters & Displays• Drinking Fountains• X-Ray & Photo Equipment• Dairy Equipment• Trucks & Trailers

Directions:1. Material may be applied with a

clean, soft, cloth, or sprayapplied with a hand type ofsprayer.

2. After application, rub surfaceuntil clean and then shine with adry cloth.

3. Use material sparingly as over-use will result in excessive dustand dirt pick-up.

LYN DISTRIBUTING 965 NO. REDWOOD ROAD, NO. SALT LAKE, UTAH 84054Phone in salt lake area 295-5022Phone outside salt lake area (800) 366-5022

278

278

ACTIVATE ACTUALLY CLEANS SEWER LINES AND DRAINSRATHER THAN JUST UNSTOPpING THEM

• CHEMICAL AGITATION LOOSENS ANDBREAKS UP LODGED WASTE SOLIDS

• CONTAINS NO ACIDS – HARMLESS TOSEWER LINES, FITTINGS ANDPACKINGS

• CONTINUES WORKING THROUGH TOSEPTIC TANK, DRAINS FIELDS ANDLAGOONS OR SEWAGE TREATMENTPLANT

• RESTORES FULL FLOW CAPACITYAND EFFICIENCY

• PROTECTS AGAINST CLOGGING ANDSTOPPAGES

• REDUCES COSTLY REPAIRS ANDCLEANOUTS

• EMULSIFIES AND DISSOLVESGREASE, OIL, PAPER, HAIR ANDOTHER CELLULOSE MATERIALS

• COLORED TO DETECTEFFECTIVENESS BY OBSERVINGCOLOR TRACES THROUGHOUTSYSTEM OR LINES

• READY TO USE – NO MIXINGNECESSARY USE IN MUNICIPALSEWER PLANTS, AND LINES ALSOINDUSTRIAL DRAINS (WILL THAWFROZEN DRAIN LINES IN SUBFREEZING TEMPERATURES)

Activate’s combination of chemical and metallic chips reacts with water to create considerable heat andagitation – readily dissolves greasy deposits, hair, vegetables and other materials containing a high percentageof cellulose that block normal water flow in sewer systems and drains. Activate breaks up and removeslodged debris and settlement not only in drains but throughout the drainage system. Particularly effective forcleaning drainage systems in food processing and meat packing plants where accumulations of organic mattertend to clog drainage facilities and produce strong unpleasant odors. Activate is easily poured or shoveled intomanholes and drains. It is colored for fast, convenient checking throughout a sewer pipe system … whenadded to strategic manholes the effectiveness of activate at work at later intervals can be checked by merelychecking for traces of color in the water in other areas or sewer lines.

Directions: For clogged sewers, use 30 pounds. Add to manhole or drain with water in drain and thechemical reaction will start. If the drain is dry add water after pouring in activate. To achieve a faster reactionpour another charge of activate following the first to get a super high heat reaction in the manhole or drain.

Regular use will aid in preventing problems caused by grease, oil, fiber, sludge and organic matter.When handling, wear goggles or face shield and protective gloves. Always add to cold water or use with coldwater only.


279

279

ARTIC BITESNOW & ICE MELTER

MELTS SNOW & ICEMELTS SNOW & ICEFAST FAST AND EFFECTIVEAND EFFECTIVE

DIRECTIONS: Apply ARTIC BITE at the beginning of snow storm if possible. Broadcastapproximately ¼ oz. Per square yard over area to be melted. For IceRemoval: Apply ARTIC BITE at the rate of 1 cup per square yard of iceto be removed.

Non-Warranty: Manufacture or seller makes no warranty, express or implied, concerning the useof this product other than for the purposes indicated on the label. Manufacture or seller is notliable for any injury or damage caused by this product.

LYN DISTRIBUTING965 NO. REDWOOD ROAD, NO. SALT LAKE, UTAH 84054

PHONE 1- 801- 295-5022 IN SALT LAKE AREAOUTSIDE SALT LAKE AREA 1- 800- 366-5022

STOP SLIPS ANDFALLS!!!

USE ARTIC BITE TOBE SAFE

NOT SORRY

280

280

DIRECTIONS: For the bestresults, wash vehicles in aprotected or shady area—not inhot sun. Use 1 to 2 ounces ofdetergent per gallon of warm orhot water. Spray, mop or spongethe cleaner solution onto wetvehicle and allo w to act forseveral minutes. Rinsethoroughly with clean water. Toavoid streaking, alway s startwashing the lower soiledsurfaces and move to uppersurfaces. For open top drummixing use 2 to 4 pounds per 50gallon of soft water.

This powdered car washdetergent may also be used inautomatic washers. Use 1 to 3ounces per gallon of water in thewash tank, or follow theinstructions provided by theequipment manufacturer.

CAR WASHPOWDERED DETERGENT

DRIES SPOTLESSAND FILM FREE

RESTORES BRIGHT LUSTERTO AUTOMOTIVE FINISHES

CAUTION: Harmful if swallowed.


CAUTION

Harmful if swallowed. Containsphosphates and other watersoftening agents. Avoid contactwith eyes or mucous membranesand prolonged contact with skin.

FIRST AID:Externa l - Flush with water.

Eye s - Flush with plenty of coolwater for at least 1 5 minutes andobtain immediate medicalattention.

Interna l - Give several glasses ofwater, followed with citrus fruitjuice. Call a physicianimmediately.

NET CONTENTS:

AWC-103

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD, NORTH SALT LAKE, UTAH 84054PHONE 1-801-295- 5022 OUT SIDE SALT LAKE AREA 1-800-366-5022

281

281

DIRECTIONS: For the bestresults, wash vehicles in aprotected or shady area—not inhot sun. Use 2 to 6 ounces ofdetergent per gallon of warm orhot water. Spray, mop or spongethe cleaner solution onto wetvehicle and allow to act forseveral minutes. Rinsethoroughly with clean water. Toavoid streaking, always startwashing the lower soiledsurfaces and move to uppersurfaces




RESTORES BRIGHT LUSTRETO AUTOMOTIVE FINISHES

BIODEGRADABLE


See side panel for further cautionsand first aid instructions.


CAUTION

Harmful if swallowed. Containssodium metasilicate. Avoidcontact with eyes or mucousmembranes and prolongedcontact with skin.

FIRST AID:External - Flush with water.

Eyes - Flush with plenty of coolwater for at least 15 minutes andobtain immediate medicalattention.

Internal - Give several glasses ofwater, followed with citrus fruitjuice. Call a physicianimmediately.

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD, NORTH SALT LAKE, UTAH 84054PHONE 1-801-295-5022 OUT SIDE SALT LAKE AREA 1-800-366-5022

282

282

DIRECTIONS: For the bestresults, wash vehicles in aprotected or shady area—not inhot sun. Use 1 to 4 ounces ofdetergent per gallon of warm orhot water. Spray, mop or spongethe cleaner solution onto wetvehicle and allow to act forseveral minutes. Rinsethoroughly with clean water. Toavoid streaking, always startwashing the lower soiledsurfaces and move to uppersurfaces. For open top drummixing use 1 to 2 pounds per 50gallon of soft water.




RESTORES BRIGHT LUSTERTO AUTOMOTIVE FINISHES



CAUTION

Harmful if swallowed. Containsphosphates and other watersoftening agents. Avoid contactwith eyes or mucous membranesand prolonged contact with skin.

FIRST AID:External - Flush with water.

Eyes - Flush with plenty of coolwater for at least 15 minutes andobtain immediate medicalattention.

Internal - Give several glasses ofwater, followed with citrus fruitjuice. Call a physicianimmediately.

NET CONTENTS:

AWC-210

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD, NORTH SALT LAKE, UTAH 84054PHONE 1-801-295-5022 OUT SIDE SALT LAKE AREA 1-800-366-5022

283

283

"BUTYLATED" POWDERED"BUTYLATED" POWDEREDCONCRETECONCRETE CLEANERCLEANER

HEAVY DUTY BUTYL BASED POWDERED FLOOR CLEANERFor super tough industrial jobs, Big Orange Concrete cleaner is the answer!Deep cleaning butyl solvents back up the 100% biodegradable detergents to givethis powder positive action in hot, cold, hard or soft water. Big Orange containsno caustics and produces no noxious fumes, but it penetrates dirt, grease andgrime other cleaners leave behind. Big Orange contains special anti-redepositingagents to lift grime and make sure that it will rinse away without leaving a film.

DIRECTIONS: Simply sprinkle BIG ORANGE generously on wetted surfaces,allow to soak then scrub with a deck brush or a stiff broom. The orange colorwill change to yellow green to show that it is digging deep to lift out the dirt, oil,grease and grime. Hose off and the floor looks like new. It really works. Youreyes will see the proof! Always use BIG ORANGE with care on finished orpainted floors, as some floor finishes are not detergent resistant and may beremoved by this product. This product is biodegradable. Because ofenvironmental problems with anti-freeze yellow green color this product is alsoavailable in red powdered form.

ORANGE POWDERED PRODUCT # U1001RED POWDERED PRODUCT # U10011

LYN DISTRIBUTING 965 No. Redwood Road No. Salt Lake, Ut 84054PHONE 295-5022 Outside Salt Lake Area 1-800-366-5022

284

284

This highly alkaline low suds heavy duty cleaner is exceptionally versatile and easy to use. It contains wetting agents,silica alkalis, water softeners and emulsifiers. The combination of these ingredients yields truly remarkable cleaning.This granular powder dissolves quickly and easily in water and the solution prepared is unaffected by hard water. Itimmediately attacks grease, oil and other soils imbedded in concrete and pulls them to the surface where they may beflushed away easily.This product has a multitude of uses, the first and primary of which Is concrete floor cleaning. It may also be used as anengine and parts degreaser, a paint stripper, a cleaner for oily equipment and tools, an additive or as the detergent forlaundering shop towels, wiping rags and work clothes, a steam cleaner, a whitewall tire cleaner and many others.Although highly alkaline, this product is safe when used as directed. It emits no hazardous or objectionable vapors in use.It is also completely biodegradable and permissible to sewer with water. As sewered it cleans traps and pipes to keepwater flowing.

DIRECTIONS FOR USE:Concrete Floors: For heavy buildups first wet floor thoroughly. Sprinkle powder lightly all over area to be cleaned. Scrubwith shop broom, brush, buffer, or walk behind scrubber. Rinse with water. For moderate to light soil add 2 to 4 ouncesper gallon of water. Flood floors with this solution. Scrub with shop broom, brush, buffer, or walk behind scrubber. Rinsewith water.

Hot Tank Degreasing: Add 5 to. 20 pounds of powder per 100 gallons of water. Heat solution to 170°F minimum. Dipengines and parts for at least 10 minutes. Remove, rinse with water and air dry. For paint stripping double or tripleconcentration. NOTE: Do not dip aluminum parts. To prevent flash rust of ferrous materials, treat surfaces immediatelywith rust preventative or light oil.

Steam Cleaning: Dissolve 1 pound of powder in 12 gallons of water. If steam cleaning unit has chemical premix tank,dissolve 2 pounds in 5 gallons of water and adjust dripolator or metering valve to deliver desired concentration. Steamsurface thoroughly, rinse and air dry.

Pressure Washers: Dissolve 2 to 4 ounces per gallon of water. If unit has chemical premix tank, dissolve 1 pound in 5gallons of water and adjust dripolator or metering valve to deliver desired concentration. Spray surfaces thoroughly andallow to stand for a few minutes to penetrate. Rinse and air dry.

Automatic Scrubbers: For large automatics to clean wood, block or concrete, add 5 pounds per 100 gallons of water.Laundry Detergent or Additive: Used as a detergent-1 cup per standard 20-25 pound load, 2 to 3 cups for 100 poundload. Used as an additive-1/4 t o 1/2 cup per standard load, 1 to 2 cups per 100 pound load.

LYN DISTRIBUTING 965 No. Redwood Road, North Salt Lake, Utah 84054Phone in Salt Lake Area 295-5022 Out Side Salt Lake Area (800)366-5022

• Odorless Heavy Duty Cleaner• Available In Orange Or White Powder• Controlled pH

285

285

Deep freezeSNOW & ICE MELTER

MELTS SNOW & ICEMELTS SNOW & ICEFAST FAST AND EFFECTIVEAND EFFECTIVE

DIRECTIONS: Apply deep freeze at the beginning of snow storm if possible.Broadcast approximately 1/8 oz. Per square yard over area to be melted.For Ice Removal: Apply deep freeze at the rate of 1/2 cup persquare yard of ice to be removed. This product has ten times the meltingpower or sodium chloride based products. A little goes a long ways.

Non-Warranty: Manufacture or seller makes no warranty, express or implied, concerning the useof this product other than for the purposes indicated on the label. Manufacture or seller is notliable for any injury or damage caused by this product.

LYN DISTRIBUTING965 NO. REDWOOD ROAD, NO. SALT LAKE, UTAH 84054

PHONE 1- 801- 295-5022 IN SALT LAKE AREAOUTSIDE SALT LAKE AREA 1- 800- 366-5022

STOP SLIPS ANDFALLS!!!

USE DEEP FREEZE“TO BE SAFENOT SORRY”

EFFECTIVE TO -60° F

286

286

BEST QUALITY, MEDIUM SUDS, MOST POPULARBEST QUALITY, MEDIUM SUDS, MOST POPULAR

Our finest quality oil grease, and grime remover for new and old concrete. This powdered cleaner cleans, rinses, and bleaches to leavethat new appearance to driveways, shop floors, ramps and docks.Deluxe concrete cleaner contains only environmentally safeingredients and is safe to use. Deluxe concrete cleaner comes in twocolors - orange that changes to yellow-green when wet or whitepowder. Use Deluxe Concrete cleaner in solution or sprinkle on andscrub in. Works in hard or soft water.

Deluxe Concrete Cleaner is a n alkaline powder that contains nosodium hydroxide which makes it safer to use. This product containspine oil for extra cleaning power and will deodorize areas that it isused in.

Always test Deluxe Concrete Cleaner on any painted surfaces tobe sure that the floor coating is not affected by this high poweredcleaning product.DIRECTIONS: Mix 2 to 4 ounces to a gallon of water (hot or cold) thenmop the floor with this solution. If the floor is exceptionally dirty, wetdown the floor and sprinkle DELUXE CONCRETE CLEANER lightly.Let set for 10 to 15 minutes, then agitate with stiff broom and rinse dirtaway.

WHITE POWDER PRODUCT #U10021-1 ORANGE POWDER PRODUCT #U1002

LYN DISTRIBUTIN G 965 NO. REDWOOD ROAD NO. SALT LAKE, UT.PHONE 295- 5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

287

287

Stan Hampton

Highlight

EMERGENCY CLEAN-UP KIT FACTSHEET

A COMPLETE CLEAN-UP AND DEODORANT KIT• QUICK• EFFECTIVE• CONVENIENT

• NON-BLEACHING• HOSPITAL GRADE• SAFE

PROVIDES SANITARY CLEAN-UP OF POTENTIALLY INFECTIOUS BLOOD ANDBODY FLUIDS SPILLS

FOR USE IN:PUBLIC FACILITIES TRANSPORTATION MEDICAL CHILD CARE

Schools Airplanes Ambulances Day Care CentersHotels/Motels School Buses Home Care Nursery SchoolsRestaurants/Bars Automobiles Cancer Care KindergartensPolice/Fire Depts. Cruise Ships Veterinary CampsChurches Tour Buses Nursing HomesCorrectional Institutions Taxis

PACKAGING:•Each kit is individually packaged for single use • Six kits are packaged to a box for multiple use

•Each box contains two sets of velcro strips for convenient wall mounting•Eight six pack boxes (48 kits) per case

FOR ENVIRONMENTAL HYGIENE

LYN DISTRIBUTING965 NO. REDWOOD ROAD NO. SALT LAKE, UTAH


KIT CONTENTS:1 Emergency Clean-Up Powder (ECP) 1.5 oz. Pack1 Pair Seamless Medical Grade Gloves with rolledcuffs.2 Water Resistant Spatulas with formed handles.2 Large EPA registered Quaternary GermicidalCloths.1 Antiseptic Hand Towel for personal hygiene.2 Black Disposal Bag with twist ties.1 Red Disposal Bag with twist tie provided strictlyas an outer bag to designate infectious wasteONLY!

288

288

EMERGENCY CLEAN-UP POWDER FACTSHEET

"SUPER" ABSORBS 100 TIMES IT'S WEIGHTTakes the dirty work out of cleaning up vomit, food spills, incontinency and

other malodor sourcesPROVIDES SANITARY CLEAN-UP OF POTENTIALLY INFECTIOUS BLOOD ANDBODY FLUIDS SPILLS

APPLICATIONS:PUBLIC FACILITIES TRANSPORTATION MEDICAL CHILD CARE

Schools Airplanes Ambulances Day Care CentersHotels/Motels School Buses Home Care Nursery SchoolsRestaurants/Bars Automobiles Cancer Care KindergartensPolice/Fire Depts. Cruise Ships Veterinary CampsChurches Tour Buses Nursing HomesCorrectional Institutions Taxis

"OCP" ODOR COUNTERACTANT POWERThe EMERGENCY CLEAN-UP POWDER is not a mask or cover up. It is an odor counteractant thatselectively filters out a broad spectrum of malodors allowing only the pleasant odors to be perceived.

This filtering effect eliminates perceived odor problems from the environment and replaces them with afresh clean scent.

FOR ENVIRONMENTAL HYGIENE

LYN DISTRIBUTING965 NO. REDWOOD ROAD NO. SALT LAKE, UTAH


FEATURES AND BENEFITS:• Instantly GELS and BINDS liquid and semi-

liquid accidents for quick and easy removal.• Instantly DEODORIZES the accident with the

Spring Green / OCP formula.• Instantly COVERS unsightly accidents.• BIODEGRADABLE - Gel safely flushes down

toilets and drains.• ENVIRONMENTALLY SAFE • NON-TOXIC• Packaging 1-lb. Can 6 per box.• 25, 50, and 100 pound drums *

*Refill cans provided with all drums

289

289

T E C H N I C A L D A T A S H E E TT E C H N I C A L D A T A S H E E T

P r o d u c t N a m e :P r o d u c t N a m e : EMZYMES 300I t e m N u m b e r :I t e m N u m b e r :

Description: This product is a concentrated bacteria-enzyme system for sewagedigestion. It biologically breaks down and digests mixtures of organic greases, fats,protein materials, oil, hair and other waste materials. Also reduces organic solids toliquids, reduces overloading of systems, reduces maintenance costs, eliminates stoppagesand eliminates odors. EMZYMES 300 contains a high anaerobic and aerobic bacterialactivity, having a minimum of 1 1/2 billion colonies per gram of product, plus a highcount of facultative types of bacteria. This product is non-caustic, non-toxic and is safe tohandle for mixing and applying. The formula is also non-corrosive to plumbing fixtures.

Where to Use: Municipal Sewage Treatment Systems / Anaerobic Sludge Digesters /Sludge Lagoons / Home Use (Wash Basins, Shower Stalls, Sinks) / Household GreaseTraps / Septic Tanks, Cesspools & Drain Fields / Restaurant and Institutional GreaseTraps and Grease Interceptors / Imhoff Tanks.

Advantages: Non-Acid / Non-Caustic / Non-Toxic / Non-Corrosive / Liquefies StandardWastes / Eliminates Odor / Hydrolyzes Proteins / Reduces Sludge Volume / ReducesSuspended Solids / Greater Digestive Capacity / Hydrolyzes Emulsified Fats to FattyAcids and Alcohols / Contains Buttering, Chelating and Anti-Chlor Additives / IncreasedLiquefaction and Gasification of Organic Wastes / Nutrient Rich to Stimulate the Growthof Micro-Organisms such as Bacteria, Fungi and Protozoa / Converts Starches toFermentable Sugars / Free Flowing Powder/

Directions: See label copy for specific use directions.

CAUTION: Do not ingest. If this should occur, drink large volumes of water and seekmedical attention. Store in a dry place. Keep container sealed when not in use to preventcontamination. Rinse empty container before discarding in an authorized landfill site.KEEP OUT OF REACH OF CHILDREN.Container Disposal: Triple rinse container and discard according to local regulations.

CAS NUMBERS: Salt 7647-14-5; Bacteria Culture (Mixture).HMIS RATING: Health-1; Flammability-0; Reactivity-0; Personal Protection-A.

10/93

290

290

This free flowing white granular powder contains caustic alkalis, water softeners, low foaming syntheticwetting agents, corrosion Inhibitors and emulsifiers. Its powerful ingredients yield remarkable cleaning in use,with safety to the operator. This powder dissolves through tough grease, carbon and oil and holds them insuspension for thorough rinsing. Although primarily designed for use as a steam or concrete cleaner, thisproduct has a number of other excellent applications. It may be used as a whitewall cleaner or pre-wash, &pressure wash, an alkaline general purpose cleaner and many more. This product's water softeners andcorrosion inhibitors keep spray tips clean and free flowing and prevent pitting and damage to delicate machineparts. This product also keeps steamer coils clean reducing the need for frequent descaling. Although highlyalkaline, this product is safe when used as directed. It emits no hazardous or objectionable vapors or fumes inuse. It is also completely biodegradable and permissible to sewer with water.

DIRECTIONS FOR USE:Steam Cleaning: Dissolve 1 pound in 12 gallons of water. If steam cleaning unit has chemical premix tank,dissolve 2 pounds in 5 gallons of water and adjust dripolator or metering valve to deliver desired concentration.Steam surfaces thoroughly, rinse and air dry.

Concrete Cleaning. For heavy buildups first wet floor thoroughly. Sprinkle powder all over area to be cleaned.Scrub with shop broom or brush. Rinse with water. For moderate to light soil add 2 to 4 ounces per gallon ofwater. Flood floor with this solution. Scrub with shop broom or brush. Rinse with water.

Whitewall Cleaner or Pre-wash: Dissolve 4 to 6 ounces per gallon of water. Apply to tire with a wheel brushor abrasive pad. Rinse with water. For pre-wash spray on tire prior to passing through car wash.

Pressure Washers: Mix I to 3 ounces per gallon of water. If unit ' has chemical premix tank, dissolve 1 poundin 5gallons of water and adjust dripolator or metering valve to deliver desired concentration. Spray surfacesthoroughly, rinse and air dry.General Purpose Cleaning: Dissolve 1 to 2 ounces per gallon of warm water. Mop, spray or wipe on surface.Scrub with an abrasive pad if required. Rinse with water.

PROPERTIES:Color: White Granular. Odor: None.Packaging: 500 pound drum, 200 pound drum, 100 pound drum, 50 pound pail.

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD NO. SALT LAKE, UT. 84054PHONE IN SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 800-366-5022

291

291

This hot tank stripper compound removesheavy grease, oil, sludge, rust, paint, andscale from ferrous metal parts, such asengine blocks, cylinder heads, crankshafts, oilpans, etc. made of steel, iron, stainless, andother ferrous metals. Do not use in contactwith aluminum, zinc galvanizing, copper,brass, bronze, tin or magnesium. Do not usein contact with painted surfaces unless paintremoval is desired.

DIRECTIONS: Use 2 to 1 pound per gallon ofwater. To charge the tank, add the stripperpowder slowly to cold water to avoidspattering and boil-over. Do not add to hotwater. Maintain the strength of the solution byperiodic additions of hot tank compound. Foroptimum cleaning, the tank solution should beheated to a minimum of 180°F. For heavycleaning, the temperature should be raised toat least 210°F. With the proper conditions oftemperature and solution strength, cleaningtime will vary from 15 minutes up to an houror more. Cleaning will be faster in agitatedtanks and fresh solutions. Freshly cleanedparts should be thoroughly flushed with waterand dried with compressed air (or wipeddown) to prevent flash rusting. Do not use thisproduct in closed spray pressure cleaningmachines, these machines require a lowfoaming solution like our low foam hot tankcleaner.

DANGER POISONHARMFUL OR FATAL IF SWALLOWED

CAUSES SEVERE BURNS

Contains sodium hydroxide. Avoidcontact with skin, eyes, mucousmembranes and clothing. Wear faceshield, rubber gloves and protectiveclothing when handling.

FIRST AID:

External: Remove contaminated clothingand launder before reuse. Flood skin withwater then wash with vinegar.

Internal: Drink large quantities of waterfollowed with citrus fruit juice. Callphysician or poison control centerimmediately.

Eyes: Call a physician immediately. Flusheyes and under eyelids with plenty of coolwater until medical help arrives.


LYN DISTRIBUTING965 NORTH REDWOOD ROADNORTH SALT LAKE, UT. 84054PHONE SALT LAKE AREA 295-5022OUTSIDE SALT LAKE 1-800-366-5022

DANGER POISONHARMFUL OR FATAL IF

SWALLOWEDCAUSES SEVERE BURNS

292

292

Directions: Add only 8 - 16 ounces L-F-HOT TANK CLEANER per gallon of water.Heat to between 150° - 200° F. Place parts to be cleaned in tank until desired resultsare obtained. This product may be used in regular hot tank solution or aluminum safehot tanks. Loose soil should be remove from parts before placing in a hot tank to extentthe life of the solution.

LOW FOAM ALUMINUM SAFE HOT TANK can also be used in a cold tank solution.This product will remain effective for many uses because it contains special bufferingagents to extend product life.

Caution: Can cause burns on skin in powdered form. May be fatal if swallowed. Do nottake internally. Do not get in eyes, on skin, or on clothing. Keep container closed.When handling, wear goggles or face shield.

• FAST ACTING - NEWFORMULATION

• SAVES LABOR AND TIME• LONG LASTING• ECONOMICAL – NEEDS LESS

THAN HALF AS MUCH TO DOTHE JOB COMPARED WITHMOST OTHER ALUMINUM-SAFEHOT TANK CLEANERS

• SAFE FOR ALL FERROUS ANDNON-FERROUS METALS

• ELIMINATES DANGER OF ACIDPICKLING AND TROUBLE-SOMEAFTER EFFECTS

• LOW FOAMING FOR EFFECTIVECLEANING IN ENCLOSED JETTYPE WASHING SYSTEMS.


293

293

Directions: Add only 8 - 16 ounces L-F-HOT TANK CLEANER per gallon of water.Heat to between 150° - 200° F. Place parts to be cleaned in tank until desired resultsare obtained. This product may be used in regular hot tank solution. Loose soil shouldbe remove from parts before placing in a hot tank to extent the life of the solution.

LOW FOAM HOT TANK can also be used in a cold tank solution. This product willremain effective for many uses because it contains special buffering agents to extendproduct life.

Caution: Can cause burns on skin in powdered form. May be fatal if swallowed. Do nottake internally. Do not get in eyes, on skin, or on clothing. Keep container closed.When handling, wear goggles or face shield.

• FAST ACTING - NEWFORMULATION

• SAVES LABOR AND TIME• LONG LASTING• ECONOMICAL – NEEDS LESS

THAN HALF AS MUCH TO DOTHE JOB COMPARED WITHMOST OTHER HOT TANKCLEANERS

• SAFE FOR ALL FERROUSMETALS

• ELIMINATES DANGER OF ACIDPICKLING AND TROUBLE-SOMEAFTER EFFECTS

• LOW FOAMING FOR EFFECTIVECLEANING IN ENCLOSED JETTYPE WASHING SYSTEMS.


294

294

HANDELING AND USE DIRECTIONSPOWER CLEAN 2001 is low foaming. Heavy-duty caustic cleaner. If is recommended forcleaning fryers and equipment with cooked onfood soils. POWER CLEAN 2001 is formulatedto be used in spray cleaning CIP cleaning and isfoam applications.

When making solutions, add POWER CLEAN2001 slowly and evenly over surface of coolwater with adequate agitation to prevent coolantspattering. Continue stirring until completelywith potable water

Foam Applications: Predissolve 10 pounds ofPOWER CLEAN 2001 in cool water, then slowlyadd to 50 gallons of hot (120-140F) water in afoamer with 1 – 2 quarts foamer. Foam onsurfaces and allow a 5 minute contact time. Donot allow foam to dry. Rinse completely withpotable water.

Boil out of Cooked-On Food Soils: use at a 1-3% caustic level, at 200 degrees for 2-3 hours.Boil out at 215 degrees for ½ hours in fryer. Forblanchers and other cooking vessels, heat the 1-3% caustic cleaning solutions for 1-2 hours at180-190 F.

CIP Cleaning: Use a 0.75 to 1/5% POWERCLEAN 2001 solutions at 170-200F. Circulatethis cleaning solution for 30-60 minutes, thendrain and rinse with potable water.Evaporator Cleaning: Prepare 1 1-3% solutionfor POWER CLEAN 2001 and circulate for 1-2hours at 170-200 F. Drain and rinse with potablewater.Bottle Washing: The normal usage is at 3-4%caustically applied through a spray system.

NOTE: 10.5 pounds of POWER CLEAN 2001 isaccepted by the USDA for use in Federallyinspected meat and poultry plants. Before usingthis compound, food products and packagingmaterials must be removed from the room orcarefully protected. After using this compound,all surfaces in the area must be thoroughly rinsedwith potable water.

Power Clean 2001

New Revolutionary Heavy Duty CausticCleaner

For INDUSTRIAL use only

DANGER

Power clean 2001 contains sodium hydroxide(CAS#1310-73-2). Causes severe eye and

skin irritation or burns. Harmful ifswallowed.

This product does not contain a knowcarcinogen.

NET CONTENTS:

LYN DISTRIBUTINGMaintenance & Industrial Chemicals

965 No. Redwood Road, No. SaltLake, Utah 84054 295-5022

PRECAUTIONS

Do not get product in eyes, on skin or on clothing.Wear recommended protective equipment. Avoidbreathing dust, use only with adequate ventilation.Keep container tightly closed when not in use.Wash thoroughly after handling.

Deadly carbon monoxide gas can form whenPOWER CLEAN 2001 contacts food soilcontaining sugars. After cleaning operations arecompleted, thoroughly ventilate enclosed areasbefore entering. Always monitor oxygen andcarbon monoxide levels when personnel are inenclosed areas. For proper tank entry procedures,see ANSIZ-117.1-1977.

PROTECTIVE EQUIPMENT

When handling POWER CLEAN 2001, workershould wear chemical goggles, rubber gloves,rubber apron and rubber boots. A nuisance dustmask may be needed if use causes dusting.

FIRST AID

EYES: Immediately flush eyes with plenty of cleanrunning water for at least 15 minutes, lifting theupper and lower lids occasionally. Call a physicianimmediately.EXTERNAL: In case of contact, immediately flushskin with plenty of clean running water for a t least15 minutes, while removing contaminated clothingand shoes. If burn or irritation occurs, call aphysician.INTERNAL: If swallowed, do NOT inducevomiting. Immediately drink a large quantity ofmilk or water and call a physician. Never giveanything by mouth to an unconscious person.INHALATION: If inhaled, immediately move tofresh air. If not breathing give artificial respiration,preferably mouth-to-mouth. If breathing isdifficult, give oxygen. Call a physician.

CHRONIC EXPOSURE EFFECTSProlonged exposure can cause dermatitis withpossible ulceration and destruction of tissue;otherwise, same as for over exposure.

295

295

LYN DISTRIBUTING 965 North Redwood Road North Salt Lake, Utah 84054 Phone in Salt Lake Area 295-5022 Out side Salt Lake City Area 1-800-366-5022

296

296

Vehicle Wash Kit-101Vehicle Wash Kit-101Automotive concentrated vehicle

washing kitÿÿ BUILDERS & WATER SOFTENERSÿÿ WETTING AGENTS & PENETRANTSThis kit was prepared to reduce shipping cost’s for CarWash Owner’s everywhere. This kit contains watersofteners, wetting agents, penetrants, rinsing agentsand detergent builders for a economically priced highperformance car washing detergent.

This kit is easy to blend on location at your car wash.This is a very concentrated kit to make 55 gallon ofconcentrated automotive wash detergent. This kitcannot be combined until you mix it in a 55 gallon drumwith soft or hard water.This kit is a great cost cutter because it saves freightcharges for the end user.

DIRECTIONS:First add 27 ½ gallon of soft water to a open top 55gallon drum, then add the box of powdered productlabel builders and water softeners.Mix this with a paddle for 3 minutes or until this part isdissolved, then add the pail labeled wetting agents andpenetrants to the 55 gallon drum, stir for 3 minutes thenfill with soft water and now you have a 55 gallon drumof concentrated automotive washing detergent that maybe diluted as far as 1 part to 200 parts water forwashing light dirt from automotive finishes. Thisproduct is free rinsing and leaves a vehicle clean andfilm free.

Caution: Do not take internally. If ingested, contact physician immediately. If eye or skin contact occurs, flush area with clear water for5 minutes. Seek medical attention if irritation persists. Keep containers sealed when not in use to prevent loss or contamination.Rinse empty container before discarding in an authorized landfill site.FOR INSTITUTIONAL & INDUSTRIAL USE ONLY

LYN DISTRIBUTINGLYN DISTRIBUTING 965 NO. REDWOOD ROAD, NO. SALT LAKE, UT. 84054965 NO. REDWOOD ROAD, NO. SALT LAKE, UT. 84054PHONE 801-295-5022 OUT SIDE SALT LAKE AREA 1-800-366-5022

297

297

CITRUS POWDERED CONCRETE CLEANERWITH ANTI-REDEPOSITING AGENTS TO LEAVE FLOORS

CLEAN !!!!

• 100% Biodegradable• Also comes in White Powder

that stays white when wet• Pleasant smelling• Made with Natural Citrus Oils

Z-12 is a free flowing orange (or white) granular powder that contains natural citrus oils and anti-redepositing agents to degrease and clean concrete or asphalt surfaces. Z-12 rinses completely toleave surfaces film free. Z-12 is 100% water soluble and turns green when used. Z-12's corrosioninhibitors, emulsifiers and citrus oils achieve remarkable cleaning ability.

DIRECTIONS: For heavy buildups, first wet floor thoroughly. Sprinkle Z-12 all over area to becleaned. Scrub with a stiff broom or brush. Wait a minute for chemicals to act, scrub again, thenrinse. For light grease and dirt on concrete, dilute 4oz. of Z-12 to a gallon of water, spread thissolution on floor and scrub with broom, then rinse.

ALWAYS use Z-12 with care on finished or painted floors, as some floor finishes are not detergentresistant and may be removed by this product.

PRODUCT # U0101

PhoneLYN DISTRIBUTING 1-801-295-5022965 NORTH REDWOOD ROAD Outside Salt Lake City:NORTH SALT LAKE, UTAH 84054 1-800-366-5022

ZZ--1122

298

298

1

Proportioning and Dispensing Systems

HydroChem SeriesHydroChems automatically dilute and dispense concentrated cleaning products in a

foaming and/or spraying mode. Models for dispensing one or two products are available,both providing full volume rinse.

Simplifies and enhances sanitation with easy operation

Cleaning up is easy with the HydroChem. Whether it’s a clean and rinse operation, orclean/rinse/sanitize, all functions are available in this one piece of equipment. Withspecial accessories, on and off can be controlled at the hose end, wherever the operatormay be. There's no need to mix a bucket of this or a bottle of that: everything is neat andhandy with the HydroChem, and switching from one function to the next is just the twistof a handle.

HydroChems not only simplify cleaning and sanitation, they deliver more effectivecleaning, too, for several reasons. First, automatically diluted solutions are mixed moreaccurately and more consistently than manually mixed solutions. Since the solution iscorrectly diluted, it performs as it was designed to perform. Second, if a foaming product

is used, the HydroChem produces a richfoam that clings to surfaces, providingmaximum contact time, which aids thecleaning process. Third, a high rinse flowcapacity helps prevent residue. Finally,since all the tools necessary for optimumcleaning results are at hand, theHydroChem increases labor productivity.Time is spent cleaning instead of goingafter tools or manually dilutingconcentrated products.

Reliable performance in a wide variety of applications

All chemically wetted parts in the HydroChem are designed to combat residue build-up and corrosion. The result is long service life even in demanding applications such as:▲ supermarket meat rooms▲ delicatessens▲ seafood shops▲ bakeries▲ any food preparation area, including full service kitchens▲ fitness facilities (locker rooms in schools, health clubs)▲ meat processing plants▲ vegetable processing and packaging areas▲ auto dealerships▲ anywhere cleaning and/or sanitizing occur and rinsing is a requirement.

HydroChem

s

Models 911 & 912

299

299

2

Systems3798 Round Bottom Rd., Cincinnati, OH 45244 USA ▲ Phone: 513-271-8800 ▲ Fax: 513-271-0160 ▲ Toll Free: 800-543-7184 ▲ www.hydrosystemsco.com © 2000Hydro Systems Europe Unit 3, The Sterling Centre, Eastern Rd., Bracknell, Berkshire, RG12 2PW England ▲ Tel: +44 (0)1344 488880 ▲ Fax: +44 (0)1344 488879Hydro Systems/Nova Controls, Hong Kong Room B, 21/F, Shin Yam Commercial Bldg., 163 Johnston Rd., Wanchai, Hong Kong ▲ Phone: 852-2836-6623 ▲ Fax: 852-2892-8880

HydroChem specifications

Number of Flow Rinse Dilution RangeModel Products Rate Flow Max.* Min.911 1 3.5 5.0 512:1 10:1912 2 3.5 5.0 512:1 10:1* Leaner dilutions possible — contact customer service for information.

Options and Accessories

Model DescriptionPrepackaged accessory kits: (everything needed to operate a HydroChem)127 Includes: (1) 1⁄2" x 6' inlet water hose (#138 below), (1) 1⁄2" x 25' discharge

hose (#131 below), (1) trigger spray gun (#141 below), and (1) foam wand(#124 below)

145 Includes: (1) 3⁄4" x 6' inlet water hose (#139 below), (1) 3⁄4" x 50' dischargehose (#134 below), (1) trigger spray gun (#141 below), and (1) foam wand(#124 below)

Hose end attachments:120 Foam wand, garden hose connection121 Spray gun with ball valve shut off, garden hose connection122 Spray gun with male quick connection123 Ball valve and female quick connect assembly (used with 122 and

124, providing hose-end control of on-off function)124 Foam wand, male quick connect141 Trigger spray gun with female quick connectHoses:131 Discharge hose, black, 1⁄2" x 25'132 Discharge hose, white, 1⁄2" x 25'133 Discharge hose, red, 3⁄4" x 25'134 Discharge hose, red, 3⁄4" x 50'138 Inlet water hose, black, 1⁄2" x 6'139 Inlet water hose, red, 3⁄4" x 6'Backflow preventors:

Accessory backflow preventors are available to meet various regulatoryrequirements. Contact Hydro Systems for assistance in choosing the model thatsuits your needs.

Hyd

roCh

ems

122 spray gun, 123 ballvalve and 124 foam wand

120 foam wand and121 spray gun

Model 911 Model 912

141 trigger spray gun

300

300

1

Proportioning and Dispensing Systems From Lyn Distributing

HydroChem SeriesHydroChems automatically dilute and dispense concentrated cleaning products in a

foaming and/or spraying mode. Models for dispensing one or two products are available,both providing full volume rinse.

Simplifies and enhances sanitation with easy operation

Cleaning up is easy with the HydroChem. There's no need to mix a bucket of this or abottle of that: everything is neat and handy with the HydroChem, and switching from onefunction to the next is just the twist of a handle.

You’ll find the following features in the HydroChem line:▲ Designed for both clean/rinse (one product) and clean/rinse/sanitize (two product)

operations.▲ On/off can be controlled at hose end, wherever the operator may be, using accessory tools.▲ Provides a thick, rich foam for more effective cleaning.▲ High rinse flow capacity helps to rinse quickly and prevent residue.▲ Components that contact chemicals are designed for chemical and corrosion resistance.▲ Clean/rinse/sanitize functions are clearly labeled for easy identification.

HydroChems not only simplify cleaningand sanitization, they deliver more effectivecleaning too. The automatically dilutedsolution is mixed more accurately andconsistently than manually mixed solutions.Since the solution is correctly diluted, itperforms just as it was designed to. Laborproductivity increases too, as time is spentcleaning rather than manually dilutingconcentrated products.

Reliable performance in a wide variety of applications

Equipment failure can cause huge problems in critical cleaning operations, and aservice call can easily double or triple the cost of the equipment. HydroChems aredesigned for long service life even in demanding applications such as:▲ supermarket meat rooms▲ delicatessens▲ seafood shops▲ bakeries▲ any food preparation area, including full service kitchens▲ fitness facilities (locker rooms in schools, health clubs)▲ meat processing plants▲ vegetable processing and packaging areas▲ auto dealerships▲ anywhere cleaning and/or sanitizing occur and rinsing is a requirement.

HydroChem

s

Models 918 & 919

301

301

Systems965 North Redwood Road, North Salt Lake, Utah USA ▲ Phone: 801-295-5022 ▲ Fax: 801-295-5044 ▲ Toll Free: 800-366-5022Hydro System USA Dealer Lyn Distributing 965 North Redwood Road, North Salt Lake, Utah 84054Tel: 801-295-5022 ▲ Fax:801-295-5044 ▲ www.lyndist.com © 2002 2

HydroChem specifications

Number of Flow Rinse Dilution RangeModel Products Rate Flow Max.* Min.918 1 3.5 5.0 512:1 10:1919 2 3.5 5.0 512:1 10:1* Leaner dilutions possible — contact customer service for information.

Options and Accessories

Model DescriptionPrepackaged accessory kits: (everything needed to operate a HydroChem)127 Includes: (1) 1⁄2" x 6' inlet water hose (#138 below), (1) 1⁄2" x 25' discharge

hose (#131 below), (1) trigger spray gun (#141 below), and (1) foam wand(#124 below)

145 Includes: (1) 3⁄4" x 6' inlet water hose (#139 below), (1) 3⁄4" x 50' dischargehose (#134 below), (1) trigger spray gun (#141 below), and (1) foam wand(#124 below)

Hose end attachments:120 Foam wand, garden hose connection121 Spray gun with ball valve shut off, garden hose connection122 Spray gun with male quick connection123 Ball valve and female quick connect assembly (used with 122 and

124, providing hose-end control of on-off function)124 Foam wand, male quick connect141 Trigger spray gun with female quick connectHoses:131 Discharge hose, black, 1⁄2" x 25'132 Discharge hose, white, 1⁄2" x 25'133 Discharge hose, red, 3⁄4" x 25'134 Discharge hose, red, 3⁄4" x 50'138 Inlet water hose, black, 1⁄2" x 6'139 Inlet water hose, red, 3⁄4" x 6'Backflow preventors:

Accessory backflow preventors are available to meet various regulatoryrequirements. Contact Hydro Systems for assistance in choosing the model thatsuits your needs.

Hyd

roCh

ems

122 spray gun, 123 ballvalve and 124 foam wand

120 foam wand and121 spray gun

141 trigger spray gun

Model 918 Model 919

302

302


1

Proportioning and Dispensing Systems

AccuDoseTM

Select SeriesAccuDose™ Select dispensers are the most economical way to dispense a wide variety of

automatically diluted solutions into spray bottles, buckets or other containers at the touchof a button. Dilution is controlled by drawing chemical through metering tips of varyingsize and injecting this metered amount into the water flow.

Lowest cost per product dispensed

AccuDose dispensers use durable materials and state of the art water valve technologyto provide low costs, consistent performance, and reliable service in a wide variety ofcustomer environments. Because the Select Series systems use fewer components to allowdispensing of many products, they offer a very low cost-per-product dispensed. The smallsystem size makes it fit well even in a janitor's closet. Users will also appreciate the ease ofoperation and low service requirements of the AccuDose line.

Users simply turn a knob to select the product or dilution desired, then push the buttonto dispense ready-to-use solution. And since each standard button can be converted tolockability in the field, customizing the standard systems to individual needs is simplerthan ever!

Select systems are available in three formats:▲ Models 3871AG-2 and 3872AG-2 provide up to four dilutions of a single product.

These systems allow multi-purpose products to easily be used for different applicationswithout altering the dispenser or requiring time-consuming measuring.

▲ Models 3874AG-2 and 3875AG-2 dispense four separate products, each at its requireddilution ratio. Alternatively, two products could each be dispensed at two differentdilutions. This system is useful when soil conditions require a product to be used fornormal and heavy duty applications, or where two products are used for various dutiesat different dilution strengths.

▲ Model 3876AG-2 is designed for building service and housekeeping applications andprovides four products dispensed at low flow through a selector – great for fillingspray bottles – plus a single product dispensed at high flow – perfect for floor care.

A key part of any chemical management program

AccuDose dispensers provide these benefits to any chemical management program:▲ Better chemical performance

• Consistently correct dilution ensures products perform as they were designed to.▲ Labor savings

• Employee time required to prepare solutions is greatly reduced.• Additional labor required to make up for solutions that are too weak is eliminated,

as well as re-work to restore areas damaged by solutions that were too strong.▲ Improved employee safety

• Exposure to potential eye and skin irritants is reduced by eliminating splashing andspilling when chemicals are poured.

• Potential for back strain is reduced by limiting lifting of large chemical containers.▲ Environmentally friendly

• Accurate dilution prevents excess chemical discharge into the waste water system.• Concentrating chemicals allows enormous reduction in packaging, minimizing

additions to the solid waste stream.

Top: Model 3876AG-2Bottom: Model representative of allother Select Series dispensers.

AccuDose Select

303

303

2

Systems3798 Round Bottom Rd., Cincinnati, OH 45244 USA ▲ Phone: 513-271-8800 ▲ Fax: 513-271-0160 ▲ Toll Free: 800-543-7184 ▲ www.hydrosystemsco.com © 2000Hydro Systems Europe Unit 3, The Sterling Centre, Eastern Rd., Bracknell, Berkshire, RG12 2PW England ▲ Tel: +44 (0)1344 488880 ▲ Fax: +44 (0)1344 488879Hydro Systems/Nova Controls, Hong Kong Room B, 21/F, Shin Yam Commercial Bldg., 163 Johnston Rd., Wanchai, Hong Kong ▲ Phone: 852-2836-6623 ▲ Fax: 852-2892-8880

One product dispensers1 GPM 3.5 GPM 1 GPM Dilutions 3.5 GPM Dilutions

Model Eductors Eductors Max.* Min. Max.* Min.3871AG-2 0 1 ----- ----- 350:1 3.5:13872AG-2 1 0 128:1 3:1 ----- -----

Four product dispensers1 GPM 3.5 GPM 1 GPM Dilutions 3.5 GPM Dilutions

Model Eductors Eductors Max.* Min. Max.* Min.3874AG-2 0 1 ----- ----- 350:1 3.5:13875AG-2 1 0 128:1 3:1 ----- -----

Five product dispenser1 GPM 3.5 GPM 1 GPM Dilutions 3.5 GPM Dilutions

Model Eductors Eductors Max.* Min. Max.* Min.3876AG-2 1 1 128:1 3:1 350:1 3.5:1

* Leaner dilutions possible – contact customer service for information.

Options and accessoriesModel Description103 Drip tray; catches spills, holds bottles while filling or not in use115 Chemical management rack; holds dispenser and concentrates, includes drip

tray. Wall, table or cart mountable116 Concentrate holding shelf for additional wall-mounted storage117 Chemical management rack for single product, lockable119 Locking option for 115 chemical management rack162 Tap water outlet valve; gives access to water source at dispenser138 Inlet water hose, 1⁄2" x 6', black185 Inlet water hose, 1⁄2" x 8', black186 Inlet water hose, 1⁄2" x 10', black

Model 3876AG-2

Accu

Dos

e Se

lect

AccuDose Select units are available with 3 types of eductors:▲ Hydro’s E-gap eductors, which provide backflow protection by using an elastomeric sleeve.▲ Hydro’s patented HydroGap II™ air gap eductors, which use a 1 inch gap of air between

the water source and the chemical inlet to provide backflow protection.▲ Standard eductors with hose bibb vacuum breakers.

* Check with Hydro’s customer service department to find out which modelis right for you.

304

304

1


AccuDoseTM Series

AccuDoseTM dispensers are an economical way to dispense a wide variety ofautomatically diluted solutions into spray bottles, buckets or other containers at the touchof a button. Dilution is controlled by drawing chemical through metering tips of varyingsize and injecting this metered amount into the water flow.

Economical, linkable systems to meet customers’ needs

AccuDose dispensers use durable materials and state of the art watervalve technology to provide low costs, consistent performance, and reliableservice in a wide variety of customer environments. Users will alsoappreciate the ease of operation and low service requirements of theAccuDose line.

Standard models are available with any combination of low and highflows in one, two and three product configurations. In addition, thelinkable inlet and outlet fittings on AccuDose dispensers allow for morethan three products to be dispensed – a larger dispensing system is createdby simply joining the appropriate units together. And even after installationof the system, it can be expanded as new product needs arise. This versatilityreduces stocking requirements while it increases the distributor's ability torespond to customer needs. And since each standard button can beconverted to lockability in the field, customizing the standard systems toindividual needs is simpler than ever!

A key part of any chemical management program

AccuDose dispensers provide these benefits to any chemical management program:

▲ Better chemical performance• Consistently correct dilution ensures products perform as they were designed to.

▲ Labor savings• Employee time required to prepare solutions is greatly reduced.• Additional labor required to make up for solutions that are too weak is eliminated,

as well as re-work to restore areas damaged by solutions that were too strong.

▲ Improved employee safety• Exposure to potential eye and skin irritants is reduced by eliminating splashing and

spilling when chemicals are poured.• Potential for back strain is reduced by limiting lifting of large chemical containers.

▲ Environmentally friendly• Accurate dilution prevents excess chemical discharge into the waste water system.• Concentrating chemicals allows enormous reduction in packaging, minimizing

additions to the solid waste stream.

AccuDose S e rie s

Top Left: Model 3833AG-2

Top Right: Model 3841AG-2

Right: Model 3853AG-2

305

305

2

Systems965 North Redwood Road, North Salt Lake, Utah 84054 USA Phone: 801-2955022 Fax: 801-295-5044 Toll Free: 800-366-5022 www.lyndist.com 2002

Hydro Systems/Nova Controls, Dealer For USA Lyn Distributing 965 North Redwood Road, North Salt Lake, Utah ▲ Phone: 801-295-5022 ▲ Fax: 801-295-5044

One product dispensers1 GPM 3.5 GPM 1 GPM Dilutions 3.5 GPM Dilutions

Model Eductors Eductors Max.* Min. Max.* Min.3830AG-2 1 0 128:1 3:1 ----- -----3833AG-2 0 1 ----- ----- 350:1 3.5:1

Two product dispensers1 GPM 3.5 GPM 1 GPM Dilutions 3.5 GPM Dilutions

Model Eductors Eductors Max.* Min. Max.* Min.3841AG-2 2 0 128:1 3:1 ----- -----3844AG-2 0 2 ----- ----- 350:1 3.5:13846AG-2 1 1 128:1 3:1 350:1 3.5:1

Three product dispensers1 GPM 3.5 GPM 1 GPM Dilutions 3.5 GPM Dilutions

Model Eductors Eductors Max.* Min. Max.* Min.3850AG-2 3 0 128:1 3:1 ----- -----3853AG-2 0 3 ----- ----- 350:1 3.5:13856AG-2 1 2 128:1 3:1 350:1 3.5:13858AG-2 2 1 128:1 3:1 350:1 3.5:1

* Leaner dilutions possible – contact customer service for information.

Options and accessoriesModel Description103 Drip tray; catches spills, holds bottles while filling or not in use115 Chemical management rack; holds dispenser and concentrates, includes

drip tray. Wall, table or cart mountable116 Concentrate holding shelf for additional wall-mounted storage117 Chemical management rack for single product, lockable119 Locking option for 115 chemical management rack144 Tap water outlet valve; gives access to water source at dispenser138 Inlet water hose, 1⁄2" x 6', black185 Inlet water hose, 1⁄2" x 8', black186 Inlet water hose, 1⁄2" x 10', black

Model 3833AG-2

Accu

Dos

e Se

ries

AccuDose units are available with 3 types of eductors:▲ Hydro’s E-gap eductors, which provide backflow protection by using an elastomeric sleeve.▲ Hydro’s patented HydroGap II™ air gap eductors, which use a 1 inch gap of air between

the water source and the chemical inlet to provide backflow protection.▲ Standard eductors with hose bibb vacuum breakers.

* Check with Lyn’s customer service department to find out which modelis right for you.

Model 3858AG-2

Model 3844AG-2

306

306


1


AutoDose™ Dispensing Systems

Pump S yste m

s(1000 S e rie s)

Using flexible programming capability, the 1000 Series AutoDoseTM Pumps dosedrains, cooling towers, boilers, pools, lubrication systems or other areas at theappropriate times. An easily programmed timer, which is housed in a moisture/vapor-resistant enclosure, turns the pump on and off to ensure regular dosing of chemicals.

Superior design for optimum performance and ease of use

It's widely accepted that it is easier to maintain drains than to unstop clogged ones.But maintenance of drains and other systems requires consistent application ofmaintenance chemicals. This is the job the AutoDose line of dispensers were designed for.Look at what the AutoDose dispensers have to offer:▲ Molded cabinet is durable and corrosion resistant, even in demanding applications.▲ The timer is visible when the cabinet is locked. It is secured from unauthorized

reprogramming and insulated frommoisture and vapors, yet the programcan be monitored.

▲ During normal operation, the timer runson the same power source as the pump,simplifying system maintenance (onlyone set of batteries to replace).

▲ Internal backup battery in timermaintains program even when mainpower source is disconnected orinoperative.

▲ Separate enclosure/access door for thetimer: the timer isn't exposed tomoisture or vapors even when thesystem cabinet is opened.

▲ Exterior pump location allows servicewithout unlocking system cabinet.

Maximum flexibility for customized dosing

Hydro's AutoDose pump systems offer great flexibility. Here's what they offer in termsof customization of dispensing:▲ choice of days, time (AM or PM) and dose durations (in one minute increments),▲ up to 8 dosing periods per 24 hours,▲ capability to dose every day, or just on specific days, and▲ tube options (Norprene and Viton) for compatibility with a wide variety of products.

But maybe the most important benefit gained by using the AutoDose pumps is thatthey don't forget to add a dose! This can greatly enhance the performance of thetreatment product.

Model 1060

307

307

2

From Lyn DistributingDistribution Nation Wide, USA ▲ Phone: 801-295-5022 ▲ Fax: 801-295-5044 ▲ Toll Free: 800-366-5022 ▲ www.lyndist.com © 2000

Pum

p Sy

stem

s(1

000

Seri

es)

AutoDose pump dispensing systems specifications

Choose the model that suits your need based on power supply desired and chemicalcompatibility of the pump tube with the product to be dispensed.

* Batteries required to run the units are not included.Models run on two 6-volt lantern-style batteries or eightD-size batteries (alkaline batteries suggested).

The following specifications apply to all models:Cabinetry ▲ Molded engineering resinFlow rate ▲ 100cc (3.5 oz.)/minute at 23 RPMProgram duration ▲ 7 days, daily variations possibleEvents ▲ 8 “on” and 8 “off” per dayMinimum “on” ▲ 1 minute (each program lasts at least 1minute)Timer display ▲ LCD

Battery or AC powered operation to suit specific needs

The AutoDose pumps run on two 6-volt lantern batteries, eight D-size batteries or onAC power (alkaline batteries suggested). Environmental conditions of the applicationcan be taken into consideration when choosing the power supply.

In some areas, particularly near drains where local safety codes may forbid electricaloutlets, battery power can be the only answer. No outlet is required at the treatment site,which adds safety in these wet areas. Battery power also makes installation easier, sincelocation of the system doesn't depend on outlet availability. Battery power ensures dosingat the proper time, even during or after power outages, enhancing the effectiveness oftreatment chemicals which require regular dosing at specified intervals.

Batteries in AutoDose systems will power Hydro's patented pump for up to 40 runninghours when alkaline batteries are used. This provides months of service for manytreatment needs. The Hydro pump is designed specifically to extend battery life, reducingthe frequency of battery replacement. These design advancements also increase tube andmotor life.

Where battery replacement may be difficult, the AC powered versions offer the sameflexible programmability and reliable dosing without requiring batteries.

Lant

ern

batte

ries

*

AC tr

ansf

orm

er

D-ce

l l ba

t teri

es*

Norp

ren e

tube

Vito

n tu

be

Model Size (w x h x d)

1060 ▲ ▲ 14" x 6" x 4"

1065 ▲ ▲ 14" x 6" x 4"

1070 ▲ ▲ 14" x 6" x 4"

1075 ▲ ▲ 14" x 6" x 4"

1080 ▲ ▲ 14" x 6" x 4"

1085 ▲ ▲ 14" x 6" x 4"

Model 1060

308

308


1

Pump Dispensing Systems

Pump System

s(1100 Series)

Using flexible programming capability, the UltraDose pail pump accurately dosesdrains, cooling towers, boilers, pools, lubrication systems or other areas at theappropriate times. An easily programmed timer turns the pump on and off as required toensure regular dosing of treatment chemicals.

Battery powered operation lends safety and convenience

UltraDose systems run on eight “D” cell alkaline batteries. No electrical outlet isrequired at the treatment site, which adds safety in wet areas. This is particularly critical

in some drain areas, where local fire and safetycodes may forbid outlets. This feature also makesinstallation easier, since location of the systemdoesn't depend on outlet availability.

Another advantage of battery power is that itensures dosing at the proper time, even during orafter power outages. This can be critical to theeffectiveness of treatment chemicals whichrequire regular dosing at specified intervals.

Batteries in the UltraDose pump system willpower Hydro's patented pump for up to 40running hours, providing months of service. TheHydro pump is designed specifically to extendbattery life, reducing the frequency of batteryreplacement. These design advancements alsoincrease tube and motor life.

Because the UltraDose pump sits on top of thetreatment product container, it's ideal wherespace is limited. These pumps add only 51⁄2 inchesto a pail's height.

Maximum flexibility for customized dosing

Hydro's 1100 Series UltraDose pumps offer great flexibility, making them the systemof choice in many applications. Here's what the UltraDose offers in terms ofcustomization of dispensing:▲ choice of days, time (AM/PM) and dose duration (one minute increments),▲ up to 8 dosing periods per 24 hours,▲ capability to dose every day, or just on specific days,▲ easy placement (due to size and battery power).

But maybe the most important benefit gained by using the UltraDose is that it doesn'tforget to add a dose! This can greatly enhance the performance of the treatment product.

309

309

Systems From Lyn Distributing

Lyn Distributing Nation Wide Distribution USAPhone: 800-366-5022 ▲ Fax: 801-295-5044 ▲ www.lyndist.com © 2003 2

UltraDose Pail Pump specifications

Pump:Flow rate ▲ 100cc (3.5 oz.) per minute at 23 RPMTube ▲ 4cc NorprenePower supply ▲ Model 1160: Eight “D” cell alkaline batteriesSize ▲ 8" tall x 14" max diameter

Timer:Program duration ▲ 7 days, daily variationEvents ▲ 8 “on” and 8 “off” per day

▲ minimum time “on” — 1 minuteDisplay ▲ LCD

Complete system as shipped includes dispenser (pump, timer/control and motor),supply and discharge tube, injection fitting, cable ties, tubing barbs and two-piece plastic“bonnet” cabinet.

Pum

p Sy

stem

s(1

100

Seri

es)

310

310

1


HydroMaster SeriesHydroMaster drum or wall mounted proportioners automatically mix liquid

cleaning and sanitizing concentrates with water and dispense the diluted solutioninto any container (auto scrubber, mop bucket, buddy jugs, etc.).

Better performance of concentrated products

Manual mixing of concentrates withwater is time consuming and imprecise— the strength of the diluted solutionmay be too strong one time and too weakthe next. Automatic dilution with theHydroMaster takes this variability out ofthe cleaning system, so the concentratedcleaning product consistently deliversmaximum performance.

Any size container of concentrate canbe used with the HydroMaster becausethere's no need to tip the container topour the contents. HydroMasters usewater power, not electricity, soconcentrates don't have to be locatednear outlets, just within a hose's reach ofa water source. Concentrates are safer touse with the HydroMaster, too. Exposureto the concentrated product is limitedonly to those times when theproportioner is being moved from oneconcentrate container to another.

Economical to use, and environmentally friendly, too!

HydroMasters are built with high quality, chemically resistant materials and haveestablished a reputation for long life in demanding industrial environments, sothey're inexpensive to operate and maintain as well as to purchase. Beyond theeconomic benefits of using HydroMasters, their contribution to the easier, moreeffective use of concentrates makes environmental sense. Use of concentrates reducessolid waste by minimizing packaging which must be disposed of or recycled.

HydroMasters have proven successful for mixing a wide variety of concentratedproducts:▲ all-purpose and specialized cleaners, sanitizers▲ water-soluble floor waxes and strippers▲ degreasers▲ soluble oil and synthetic coolants▲ fertilizers and fungicides.

HydroM

a ste rs

Model 206

311

311

2

Systems965 North Redwood Road, North Salt Lake, Utah 84054 USA ▲ Phone: 801-295-5022 ▲ Fax: 801-295-5044 ▲ Toll Free: 800-366-5022 ▲ www.lyndist.com © 2000


Recap of benefits:

▲ increased productivity of employees▲ efficient use of space▲ enhanced safety▲ maximized cleaning product performance▲ more conscientious response to environmental concerns.

HydroMaster performance characteristics by model

Flow Rate Approximate DilutionGPM at Range at 40 PSI, 1.0 cp

Model Description 40 PSI Max. Min.

204 wall mounted 4.8 400:1 4.5:1206 wall/drum mounted 4.8 400:1 4.5:1208 high concentration 2.5 110:1 1:1216 wall/drum mounted 9.8 1024:1 5:1220 wall/drum mounted 16.8 1136:1 8:1

Note: HydroMasters are not designed for use with a spray gun or any other type ofshut off valve at the discharge end of the proportioner. If the application requires thistype of operation, see information on the HydroSprayer and HydroChem Series ofproportioners.

Options and accessories

138 Inlet water hose, 1⁄2" x 6', black185 Inlet water hose, 1⁄2" x 8', black186 Inlet water hose, 1⁄2" x 10', black

Accessory backflow prevention devices are available as retrofitted options if required.See separate literature on the various types offered by Hydro Systems.

Hyd

roM

aste

rs

Model 206 Model 220

312

312


The HydroChem applies diluted solution in a foaming or spraying mode, depending on the chemical and hose attachment used to apply it. Models for applying one or two products are available, both providing high volume rinse capability. The wash/rinse/sanitize capability of the two-product system is ideal for cleaning food handling and processing areas such as meat rooms, as well as shower rooms and other large areas. HydroChems automatically dilute and apply concentrated cleaning and sanitizing products in a foaming and/or spraying mode. Models for applying one or two products are available, both providing high volume rinse. Simplifies and enhances sanitation with easy operation Cleaning up is easy with the HydroChem III. Whether it’s a clean and rinse operation, or clean/rinse/sanitize, all functions are available and identified on this one piece of equipment. With special accessories, on and off can be controlled either at the hose end or the dispenser, wherever the operator may be. There's no need to mix a bucket of this or a bottle of that: everything is neat and handy with the HydroChem III, and switching from one function to the next is just the twist of a handle. For ease of operation, the wash, rinse, and/or sanitize functions are clearly labeled for immediate identification. HydroChems not only simplify cleaning and sanitation, they deliver more effective cleaning, too. First, automatically diluted solutions are mixed more accurately and more consistently than manually mixed solutions. Since the solution is correctly diluted, it performs as it was designed to perform. Second, if a foaming product is used, the HydroChem III produces a rich foam that clings to surfaces, providing maximum contact time

313

313

which aids the cleaning process. Third, a high rinse flow capacity helps prevent residue. Finally, since all the tools necessary for optimum cleaning results are at hand, the HydroChem III increases labor productivity. Time is spent cleaning instead of going after tools or manually diluting concentrated products. Reliable performance in a wide variety of applications All chemically wetted parts in the HydroChem III are designed to combat residue build-up and eliminate corrosion. The result is long service life even in demanding applications such as: supermarket meat rooms delicatessens seafood shops bakeries any food preparation area, including full service kitchens

fitness facilities (locker rooms in schools, health clubs) meat processing plants. vegetable processing and packaging areas auto dealerships. anywhere cleaning and/or sanitizing occur and rinsing is a requirement

HydroChem specifications: Number of Flow Rinse Dilution Range

Model Products Rate Flow Max*. Min. 931 1 3.5 5 512:1 10:1 932 2 3.5 5 512:1 10:1

• Leaner dilutions possible — contact customer service for information. Model Description Prepackaged accessory kits: (everything needed to operate a HydroChem III) 127 Includes: (1) 1 /2" x 6' inlet water hose (#138 below), (1) 1/2" x 25' discharge hose (#131 below), (1) trigger spray gun (#141 below), and (1) foam wand (#124 below) 145 Includes: (1) 3 /4" x 6' inlet water hose (#139 below), (1) 3 /4" x 50' discharge hose (#134 below), (1) trigger spray gun (#141 below), and (1) foam wand (#124 below) Hose end attachments: #120 Foam wand, garden hose connection #121 Spray gun with ball valve shut off, garden hose connection #122 Spray gun with male quick connection #123 Ball valve and female quick connect assembly (used with 122 and 124, providing hose-end control of on-off function. #124 Foam wand, male quick connect #141 Trigger spray gun with female quick connect

Hoses: #131 Discharge hose, black, 1/2" x 25'. Hose approved to 200°F. #132 Discharge hose, white, 1 /2" x 25' #133 Discharge hose, red, 3 /4" x 25'. Hose approved to 200°F. #134 Discharge hose, red, 3 /4" x 50'. Hose approved to 200°F. #138 Inlet water hose, black, 1 /2" x 6' #139 Inlet water hose, red, 3 /4" x 6'

Backflow preventors: Accessory backflow preventors are available to meet various regulatory requirements. Contact Lyn Distributing for assistance in choosing the model that suits your needs.

Lyn Distributing Phone 1-800-366-5022 web site www.lyndist.com Fax 1-801-295-5044

#120 Foam wand, #121 Spray gun

#122 Spray gun male QC

#123 Ball valve and female QC

#141 trigger spray gun w/female QC

124 Foam wand, male QC

314

314

Lyn Distributing Drain Maintenance Pumps

115 Volt or Battery Powered

AutoDose (wall mounted) and UltraDose (pail mounted) peristalic pump systems deliver a prescribed amount of chemical at preset times using an easily programmed timer to turn the pump on and off. This helps ensure regular dosing around the clock for optimal performance of the chemical. Units can be powered by D-cell or lantern batteries. The wall mounted unit may also be converted to AC power.

LYN DISTRIBUTING 965 No. Redwood Road North Salt Lake, UT 84054

Phone (801) 295-5022 Web site www.lyndist.com Outside Salt Lake Area 1(800) 366-5022

315

315

QUICK FILL LYN DISTRIBUTING'S QUICK Fill System will fill auto-scrubbers and buckets 10 times faster than conventional methods. The unique blending system utilizes state-of-the-art super-concentrates. QUICK Fill has a 165 - 300 gallon translucent holding tank, which mounts on standard warehouse racking or an all welded stand. The automatic water shut off feature activates when the RTU solution tank is full, or when the RTU solution tank is empty, making it safe and easy to use. No employee mixing or handling of detergent products.

LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, Utah. 84054 Phone Salt Lake Area 295-5022 www.lyndist.com Outside Salt Lake Area 1-800-366-5022

The Quick Fill Float. This proportioning float value dilutes the concentrated detergent to just the right mixture everytime so that employees do not have to guess at the right dilution or handle concentrated cleaning products.

This chemical suction line will bring chemical from 2' -50' distances away from the mixed solution tank. Chemical may be mixed at dilution ratios from 1 part chemical to 4 parts water to 1 part chemical to 412 parts water. You the end user will decide the dilution ratio that works best in your facility.

316

316

Proportioning and Dispensing Systems from Lyn Distributing

Systems965 North Redwood Road, North Salt Lake, Utah 84054 USA ▲ Phone: 801-295-5022 ▲ Fax: 801-295-5044 ▲ Toll Free: 800-366-5022 ▲ www.lyndist.com Hydro Systems Intermountain USA Dealer Lyn Distributing 965 North Redwood Road North Salt Lake, Utah 84054 ▲ Tel: 801-295-5022 ▲ Fax: 801-295-5044Hydro Systems/Nova Controls, from Lyn Distributing 965 North Redwood Road, North Salt Lake, Utah 84054 Fax 1-801-295-5044

SinkMaster dispensers meet the need for filling large sinks with detergent and/orsanitizer in food service applications.

Convenient, point-of-use dispensing for manual warewashing

As the focus on food service safety increases, more attention is being paid to theimportance of manual warewashing. Hydro's SinkMaster allows you toconveniently fill large sinks with properly diluted solutions of detergent and/orsanitizer regardless of the size of the sink or how much solution is dispensed. Nomore guesswork on how much detergent or sanitizer to add, or worry about thetraining of new employees due to the high turnover in food service.

The SinkMaster was carefully designed to include the following benefits to foodservice operations:▲ Ball valve operation allows use without holding or locking a button

— labor productivity increases since employees can be doing other activitieswhile large sinks are filling.

▲ Label graphics make the unit easy to use, even for first-timers.▲ Ultra-lean metering tip is included for today's super concentrated sanitizers.▲ Rugged stainless steel construction is hygienic and consistent with other food

service equipment.▲ Worker safety is increased since chemical handling is virtually eliminated.▲ Chemical performance is optimized by consistent, appropriate dilution. Tough

standards of food service hygiene become easier to maintain.

Specifications, options and accessoriesDilution Range

Model Flow Rate Max. Min. Products Dispensed883 3.5 GPM 460:1 3.5:1 28831 4 GPM 460:1 3.5:1 2

Accessories:138 Inlet water hose, 1⁄2" x 6', black199 Adaptor kit (to install water inlet from overhead rinse arm)

S inkMa ste r

Model 883

SinkMaster from Lyn Distributing 1-800-366-5022

* Check with Lyn's Customer Service department to find out which model is right for you.

SinkMaster systems are available with two types of eductors: *▲ Hydro's E-Gap eductors, which provide backflow protection through use of an

elastomeric sleeve. (ASSE 1055B Approved)▲ Hydro's patented HydroGap II™ air gap eductors, which use a one inch gap of

air between the water source and the chemical inlet to provide backflowprotection. (ASSE 1055B Approved.)

317

317

1


TaskMizer Series

Ta skMiz e r

TaskMizer dispensers combine the latest in dispensing technology with maximumdesign flexibility, creating a system that delivers a unique and effective way to dispensediluted solutions into any container.

State-of-the-Art Technology

TaskMizer dispensers contain the latest developments indispensing technology, providing the industry's most advanced,cost efficient dispensers.▲ Patented remote activation: Allows for easy filling of buckets

and auto scrubbers, even around corners.▲ Unique bottle activation: Allows for easy one-hand filling of

spray bottles.▲ Patented selector valve: Provides lowest cost multi-product

system, along with flexibility for multiple dilutions of one ormore products.

▲ Optional flow control devices: Regulate water flow toincrease dilution accuracy and consistency.

▲ Unique mounting brackets: Allow for quick, easyinstallation, saving time and money.

▲ Space saving design: Requires less mounting area thansimilar systems.

Design Flexibility

No matter what you need in a chemical management system, the TaskMizer seriescan provide the results you are looking for.▲ For multi product use, the TaskMizer uses the selector valve concept to lower costs

for bottle and bucket filling.▲ Units can be supplied with our new patented remote filling gun, or the more

traditional button operation to meet your individual needs.▲ For satellite locations, use the single product high flow unit or the Select four

product low flow unit.▲ Optional features include: chemical enclosures that fit two 2-litre bottles, or wall

mounted racks for chemical storage.

* Check with Hydro's Customer Service department to find out which model is right for you.

TaskMizer systems are available with three types of eductors: *▲ Hydro's E-Gap eductors, which provide backflow protection through use of an

elastomeric sleeve. (ASSE 1055B Approved)▲ Hydro's patented HydroGap II™ air gap eductors, which use a one inch gap of

air between the water source and the chemical inlet to provide backflowprotection. (ASSE 1055B Approved.)

▲ Standard eductors with mechanical hose bibb vacuum breakers.

Models 48781, 48761, 48751, 48331

Model 48761

318

318

2

Systems965 North Redwood Road, North Salt Lake, Utah 84054 USA ▲ Phone: 801-2955022 ▲ Fax: 801-295-5044 ▲ Toll Free: 800-366-5022 ▲ www.lyndist.com [email protected] 2002


Task

Miz

er

Dual SelectModel Includes

High Flow

Air Gap Hose Bibb E-Gap Remote StandardEductor Vac. Bkr. Eductor Fill Gun Button Operation

48781 ▲ ▲48782 ▲ ▲48791 ▲ ▲48792 ▲ ▲48793 ▲ ▲

Description

Dispenses up to 4 lowflow and 2 high flowproducts.(plus clear water rinse)

Select Plus

One Product

Model IncludesHigh Flow


48761 ▲ ▲48762 ▲ ▲48771 ▲ ▲48772 ▲ ▲48773 ▲ ▲

Description

Dispenses up to four lowflow products and onehigh flow product. Oneproduct may be dispensedat both flow rates.

Low Flow Select FourModel Includes

High Flow


48751 ▲48752 ▲48753 ▲

Description

Dispenses up to fourproducts, or multipledilutions of 1-2 products.

Model IncludesHigh Flow


48331 ▲ ▲48332 ▲ ▲

Description

One product, high flow.

Options and accessoriesModel Description48000 Chemical container enclosures, fits two 2-litre containers, lockable49000 Chemical management rack, fits four 1-gallon containers115 Chemical management rack, fits three round 1-gallon or 4 F-style containers117 Chemical management rack for single product, lockable119 Locking option for 115 chemical management rack10084232 Flow Control device, 4GPM10084231 Flow Control device, 1GPM138 Water Inlet hose, 1⁄2" x 6', black

Model 48751 with 115 rack

Model 48331 with 117 rack

Model 48781 with (2) 48000enclosures

319

319



Hydrofoamer 481 - 96 ounce container hose end foamer

Hydrofoamer 483 48 ounce hose end foamer sprayer

The Hydrofoamer 483 - 48 ounce or Hydrofoamer 481 96 ounce tank size can be controlled using the trigger on

the spray gun and to clean the device, the concentrate container is easily disconnected via a fast coupler. The hydrofoamer 483/481 is non-electric and no installation is required, making it extremely user-friendly.

Hydrofoamer 483/481 hose end proportioners combine automatic dilution with convenient control of where and how solution is applied. Hydrofoamers provide a thick, rich foam for more cling time on the surface being

cleaned. On and off functions are controlled using a trigger on the spray gun. To rinse, the concentrate container is disconnected via a quick coupler. Dilution control tips supplied with the hydrofoamer 483 or 481.



HydroFoamer 481, 483 or HydroSprayer 381, 383 Spray Gun without Quick coupler. Insulated grip Spray Gun # HYD210

Quick Coupler for HydroFoamers or HydroSprayers. Couples Lids to Spray Guns #HYD211

HydroFoamer Lid for 48 ounce or 96 ounce HydroFoamers. HydroFoamer 483 or HydroFoamer 481. Connects to quick coupler for operation of the 2 models of hydrofoamers. # HYD214

320

320

Ease of use enhances product performance

Application of diluted solution with the HydroFoamer or HydroSprayer hose-end proportioners is easy. On and off functions are finger-tip controlled using a trigger on the spray gun. To rinse, the concentrate container is disconnected

using an easy-to-operate quick coupler, which is designed to allow either a full width spray or powerful jet stream when rinsing. This range of control helps personnel put the solution only where it's wanted. Handles on larger containers

increase the operator's control over application.

HydroFoamers and HydroSprayers eliminate the time and hassle of manually mixing concentrates, which not only increases labor productivity, but also increases concentrate performance because the solutions are consistently mixed as

directed by the manufacturer. Since concentrates are mixed only as they're applied, they are fresh and will perform at peak power, but waste is minimized. When the HydroFoamer and HydroSprayer are used in combination (see reverse), a total

system is provided that allows cleaning, rinsing and sanitizing. These hose end foamers are very durable.

HydroFoamer models Dilution Range

Model Capacity Max.* Min. 481 Hydrofoamer 96 ounces (2.8 litres) 128:1 , 12:1 483 Hydrofoamer 48 ounces (1.4 litres) 128:1 , 12:1

The HydroFoamer's unique injection concept mixes the proper amount of concentrate with both air and water to produce a thick, rich foam for longer soak time.

HydroSprayer Models Model Capacity Max.* Min.

381 Hydrosprayer 96 ounces (2.8 litres) 128:1 16:1 383 Hydrosprayer 48 ounces (1.4 litres) 128:1 16:1

Hydro Sprayers produce a fine mist spray suitable for application of no-rinse sanitizers or products used to cover relatively large areas.

Lyn Distributing 965 North Redwood Road, North Salt Lake, Utah 84054 801-295-5022

Quick coupler For

Hydrofoamer or Hydrosprayer

Sprayer Gun For Foamer or

Sprayer

Container Top For Foamer

Container Top For Sprayer

321

321

322

322

Sizes : One Size Fits Most Product Category PRC

Catalyst Safety Glasses, Black Gloss Frames with a Polycarbonate Lens, ASC (Anti-Scratch Coating) Lens, Wrap Around Lens for side protection, Soft

Flanged Nose Piece, flexible curved temples for secure fit.

All Styles Meet or Exceed ANSI Z87.1+ Standards and provide 99.9% U/V protection

Lyn Distributing Phone 1-800-366-5022 or Local 801-295-5022

LYEOB10S-10 LYEOB70S-10 LYEOB60S-10 Black Frame Clear Lens Black Frame Silver Mirror Lens Black Frame Blue Mirror Lens

LYEOB20S-10 LYEOB30S-10 LYEOB50S-10 Black Frame Grey Lens Black Frame Amber Lens Black Frame Indoor/Outdoor Lens

Retriever: Black Frame/Clear Lens: EJB10S

Sizes : One Size Fits Most

Retriever, Black Frame/Clear Polycarbonate Lens, ASC (Anti-Scratch Coating), Extendable Temples EJB10ST: Black Frame/Clear Anti-Fog Lens All Styles Meet or Exceed ANSI Z87.1+ Standards

323

323

DOBERMAN Safety Glasses

LYNENB50S-3 Black Frame, <Indoor/Outdoor Lens

< LYENB20S-3 Black Frame, Grey Lens LYENB70S-3 > Black Frame, Silver Mirror Lens

< LYENB30S-3 Black Frame, Amber Lens LYENB60S-3 > Black Frame, Blue Mirror Lens

Lyn Distributing 965 North Redwood Road, North Salt Lake, Utah 84054Phone 1-801-295-5022

Clear Gel Nose Safety Glasses. Doberman Safety Glasses Have Gel Temples That Comfortably Stay On By Wrapping Around The Back Of The Ears Rather Than Pressuring The Head And Will NOT Slip. Gel Nose Piece Fits Securely And Will Not Slip, Provides Comfort for Longer Periods Of Wear. Durable, Lightweight Polycarbonate Lens Offers 99.9% Ultraviolet Protection. Single Lens Wrap-Around Design Offers Unobstructed Field Of Vision. Rugged Proprietary "ASC" Lens Coating (Anti-Scratch Coating) Offers Superior Scratch Resistance. Meets Or Exceeds ANSI Z87.1, EN 166 And CSA Product category PRC

LYNENB10S-3 <Black Frame, Clear Lens LYNENB70S-3 Black Frame, > Silver Mirror Lens

324

324

325

325

LYN DISTRIBUTING Phone 1-800-366-5022 Fax 1-801-292-6196 Nitrile Disposable, Vinyl Disposable Gloves

Latex Gloves Disposable: Small, Medium, Large or Extra Large

Made with USDA approved materials (for safe food handling) Powder Free, Chemical Resistant

Ambidextrous * Seamless * 8 Mil thickness

100 per box, 10 boxes per case Natural Color






Made with USDA approved materials (for safe food handling) Lightly Powdered, Chemical Resistant



Latex Gloves Disposable: Small, Medium, Large or Extra Large, 12" Cuff



50 per box, 10 boxes per case Blue Color

326

326

LYN DISTRIBUTING Phone 1-800-366-5022 Fax 1-801-292-6196 Latex Disposable * Vinyl Disposable Gloves 1

Gloves Disposable : Small, Medium, Large or Extra Large, Nitrile


Ambidextrous * Seamless * 5 Mil thickness 100 per box, 10 boxes per case Blue Color

Gloves Disposable : Small, Medium, Large or Extra Large, Nitrile



Gloves Disposable : Small, Medium, Large or Extra Large , Nitrile



Polyethylene Gloves 100 per Dispenser box

100 dispenser boxes per case.

327

327

LYN DISTRIBUTING Phone 1-800-366-5022 Fax 1-801-292-6196 Latex Disposable * Nitrile Disposable Gloves * Vinyl Gloves Page 1

Vinyl Gloves Disposable: Small, Medium, Large or Extra Large

Made with USDA approved materials (for safe food handling) Powder Free



Vinyl Gloves Disposable: Small, Medium, Large or Extra Large, 12" Cuff



100 per bag, 10 bag per case Natural Color

328

328

LYN DISTRIBUTING Phone 1-800-366-5022 Fax 1-801-292-6196 Latex Disposable * Nitrile Disposable Gloves * Vinyl Gloves Page 2


Made with USDA approved materials (for safe food handling) Lightly Powdered





Ambidextrous * Seamless * 6.5 Mil thickness

300 per box, 4 boxes per case Green Color









329

329

VB230P: Class II, Lime Green or Orange Mesh Breakaway Safety Vests, Two Horizontal Silver Stripes, Velcro Closure, One Pocket Sizes Med, Large, X Large, 2 X Large, 3 X Large. Breakaway safety vest are for added plant safety.

COR-BRITE, Class III, Lime Green or Orange Mesh Safety Vest, Zipper Closure, Two Lower Inside Pockets, One Outside Pocket, One 4-Division Pen Pocket, 2-inch Silver Reflective Tape Meets ANSI / ISEA 107-2010 Standards.

Class II, Mesh Safety Vest, Two Horizontal Stripes, Zipper Closure, One Inside Pocket. All class II Safety Vests meet or exceed ANSI / ISEA 107-2004 STANDARD. Works on highways for workers or sign holders. Pick color orange or lime green.

COR-BRITE, Class III, Lime Green or Orange Mesh Safety Vests, Zipper Closure, Two Lower Inside Pockets, Two Outside Chest Pockets, Two Outside Lower Pockets, All Pockets include Velcro Closures, 2- inch Reflective Tape on 4.5- inch Contrasting Background Tape. Meets ANSI / ISEA 107-2010 Standards.

Class II, Surveyors Vest, Orange or Lime Green Safety Vests Mesh, Silver Stripes, Zipper Closure, Four Front Pockets.

Class I, Mesh safety Vest, 1" Reflective Tape ORANGE OR LIME COLOR: pick color from option pull down. Velcro closure 1 size fits all.

Class I, Mesh safety Vest, 2" Reflective Tape ORANGE OR LIME COLOR: pick color from option pull down. Velcro closure 1 size fits all. 95A

330

330

#H7337-20 Ratchet Headgear- Holds plastic face shield for full face protection.

#H7338-20 Polycarbonate Face Shield use with headgear above for liquid & chemical full face protection

#HPP950-3 Brown Insulated Work Glove PVC coated glove for wet protection.

#H102-10 Size 11 over the Shoe Boot. Black Rubber boot for working in wet areas. #H103-10 Size 10 over the Shoe Boot. Black Rubber boot for working in wet areas. #H104-10 Size 12 Black Rubber Boot.

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NORTH SALT LAKE, UT 84054 PHONE-SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

331

331

SIZE: Small 6 ½ - 8 Medium 8 – 9 ½ Large 9 ½ - 11 Extra Large 11 - 13 Item #CP086-XL-6 X-LARGE #CP086-L-6 LARGE #CP086-M-6 MEDIUM

#H2442-3 DISPOSABLE APRON 1000 PER CASE

HA1004-3 HEAVY DUTY NEOPRENE APRON

#H7312-10 DUST & MIST MASK MSHA & NIOSH APPROVED TC-21C-271 20/BOX

#H7300 DISPOSABLE NON-TOXIC DUST MASK – Protects for effects of pollen, dust, grass and non toxic particles. 50/BOX

#H101-1 SAFETY GOGGLES Perforated Frame for Maximum Ventilation Meet ANSI Z87.1 Safety Standards

#H7332-10 One Piece Safety Spectacles No Blind Spots Meet ANSI Z87.1-1989 Safety Standards

#H7330-10 Safety Glasses 58mm scratch-resistant poly-carbonate lens. Meets ANSI Z 87.1-1989 Safety Standards

Gatorback Pads For Shoes #CP087-XL-6 X-LARGE #CP087-L-6 LARGE #CP087-M-6 MEDIUM

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NORTH SALT LAKE, UT 84054 PHONE-SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

332

332

#H9314R-3 ROUGH GRIPBLACK PVC GLOVE WITHCLOTH LINING 14” CUFFLARGE SIZE FOR MEN

#HG102-3 ORANGE GLOVEWITH RUBBER GRIP WEBOVER-LAY. LARGE SIZEFOR MEN.

#H7302S-3 SMALL SIZE 35 MIL. RAIN SUIT#H7302M-3 MEDIUM SIZE 35 MIL. RAIN SUIT#H7302L-3 LARGE SIZE 35 MIL. RAIN SUIT#H7302XL-3 EXTRA LARGE 35 MIL.RAIN SUIT#H7302XXL-3 EXTRA-EXTRA LARGE 35 MIL SUIT

#H9410S-2 SMALL SIZE LATEX DISPOSABLE GLOVE. 100 / BOX#H9410M-2 MEDIUM SIZE LATEX DISPOSABLE GLOVE. 100 / BOX#H9410L-2 LARGE SIZE LATEX DISPOSABLE GLOVE. 100 / BOX

#H344-10 RUSSET COLORLEATHER GLOVE.FLEECE LINED. LARGESIZE FOR MEN

#H2700S-2 SMALL SIZE VINYL EXAM GLOVE LIGHTLY POWDERED#H2700M-2 MEDIUM SIZE VINYL EXAM GLOVE POWDERED#H2700L-2 LARGE SIZE VINYL EXAM GLOVE POWDERED. 100 / BOX

333

333

#H3806M-20 medium#H3806L-20 large#H3806XL-20 extra large

#H1003-3 LARGE SIZE GLOVE#H1003M-3 MEDIUM SIZE GLOVE#H1003S-3 SMALL SIZE GLOVE#H1003XL-3 EXTRA LARGE GLOVE

#HG103-3 RED LINEDBROWN JERSEY GLOVE

#H9001-10 PAINT & PESTICIDE RESPIRATOR#H9001P-10 PAINT / PESTICIDE CARTRIDGE AND FILTER

#HG104-3 BROWN JERSEYGLOVE UNLINED-CLUTEPATTERN

334

334

100% DuPont Kevlar Shell Gloves with Premium Latex Blue Palm Coating. Quality Kevlar Cut Resistant Gloves

10 Gauge Kevlar String Knit Shell Premium Blue Latex Palm Coated Made with FDA Accepted Materials for Food Contact

Applications Sizes for Kevlar latex palm coated gloves: S, M, L, XL # H0503

100% DuPont Kevlar Shell Gloves with Premium PVC Dotted on Both Sides Quality Kevlar Cut Resistant Gloves

7 Gauge Kevlar String Knit Shell PVC Dotted on 2 Sides ASTM/CPPT Cut Level 3: 1118 grams Sizes for Kevlar PVC Dotted gloves: S, M, L, XL # H5703

100% DuPont Kevlar String Knit Gloves Quality Kevlar Cut Resistant Gloves

7 Gauge Kevlar String Knit Medium Weight Made with FDA Accepted Materials for Food Contact

Applications, Reversible Gloves ASTM/CPPT Cut Level 3: 1118 grams Sizes for Kevlar String Knit gloves: S, M, L, # H0703

KEVLAR/LYCRA NITRILE PALM COATED GLOVES Kevlar Cut Resistant Gloves

Kevlar/Lycra String Knit Shell Foam Nitrile Palm Coated Provide cut and abrasion resistance without compromising

dexterity, tactility and comfort. The liner conforms to the shape of the hand and provides

minimal resistance to hand movement, thus greatly reducing fatigue

ANSI cut level 1 and EN388 cut level 2 performance. Textured nitrile coating gives impressive grip on wet or oily

surfaces. Sizes for Cut resistant gloves: S, M, L, XL ITEM #H5503

Lyn Distributing 965 North Redwood Road, North Salt Lake, Utah 84054 Phone 1-801-295-5022

335

335

Lyn Distributing Gloves Products List

Lyn Distributing Phone 801-295-5022 - 49 -

Gray Color String Knit with Blue Premium Latex Coated Palm. Palm Coated Glove (Blue Color Latex heavy latex coating) Thumb Coated. Size Small, Medium, Large, X-large

Gray Color String Knit with Grey Medium Latex Coated Palm. Palm Coated Glove (Grey Color Latex Medium latex coating) Thumb Coated. Size Small, Medium, Large, X-large

White Color String Knit with Blue Light Latex Coated Palm. Palm Coated Glove (Blue Color Latex light latex coating) Thumb Coated. Size Small, Medium, Large, X-large

Nitrile Gloves, Fully Coated with a Smooth Finish. Jersey lined with knit wrist.

Nitrile Gloves, Fully Coated with a Rough Finish. Jersey lined with knit wrist.

Nitrile Gloves, Fully Coated with a Smooth Finish. Jersey lined with Safety Cuff

Double Leather Palm Leather Glove, Striped Canvas Back Glove Has Double Leather Palm for longer wearing glove. Gunn Cut Pattern, 2.5-inch Rubberized Safety Cuff.

Shoulder Leather Palm with Striped Canvas Back, Gunn Cut Pattern, 2.5 inch Rubberized Safety Cuff

Standard Grain Cowhide Leather Driver Glove, Unlined Quality grain cowhide, keystone thumb, shirred elastic back. Sizes: S, M, L, XL

String Knit Kevlar Gloves with Latex Blue Palm Coating Sizes: S, M, L, XL Quality Kevlar Cut Resistant Gloves, Kevlar String Knit Shell, Premium Blue Latex Palm Coated

PVC Dotted String Knit Kevlar Gloves. Sizes: S, M, L, XL Quality Kevlar Cut Resistant Gloves, 100% Kevlar String Knit Glove, PVC Dotted on 2 Sides, 7 Gauge, Medium Weight, Reversible

String Kni t Kevlar Cut Resistant Gloves 100% Kevlar Yellow String Knit Glove, 7 Gauge, Medium Weight, Reversible. Sizes: S, M, L, XL

336

336



Kevlar/Lycra Nitrile Palm Coated Gloves Kevlar Cut Resistant Gloves, Kevlar/Lycra String Knit Shell. Foam Nitrile Palm Coated. Sizes: S, M, L, XL

Men's gray leather welder's gloves

Standard Deerskin Drivers Gloves Grain Deer Leather, Keystone Thumb, Shirred Elastic Back, Unlined, Sizes: Small, Medium, Large, Extra Large

Premium Deerskin Drivers Gloves Grain Deer Leather, Keystone Thumb, Shirred Elastic Back, Unlined, Sizes: Small, Medium, Large, Extra Large

Thinsulate Lined Premium Deerskin Gloves Grain Deer Leather, Keystone Thumb, Shirred Elastic Back, Thinsulate lined, Sizes: Small, Medium, Large, Extra Large

Red Fleece Lined Premium Deerskin Gloves Grain Deer Leather, Keystone Thumb, Shirred Elastic Back, Red Fleece lined, Sizes: Small, Medium, Large, Extra Large

Red Fleece Lined Brown Jersey Gloves Brown jersey glove with red fleece lining, full fashion, straight thumb, slip on style. one size large

String Knits Gloves or Glove Liner Seamless Medium weight natural white 100% cotton string knit, reversible, are commonly used as a glove liner and for various applications.

13 Mil Gloves Lightly Powder Disposable Latex Gloves Blue High Risk Medium, Large or Extra Large. These disposable latex gloves are made with USDA approved materials (for safe food handling). 13 Mil gloves. 50 per box, 10 boxes per case, Medical Grade

8 Mil Gloves Powder Free Disposable Latex Gloves Small, Medium, Large or Extra Large. These disposable latex gloves are made with USDA approved materials (for safe food handling). 8 Mil gloves. 100 per box, 10 boxes per case

337

337



8 Mil Gloves Powder Free Disposable Nitrile Gloves Small, Medium, Large or Extra Large, 2X Large. These disposable nitrile gloves are made with USDA approved materials (safe food handling). Chemical resistant gloves. 8 Mil gloves. 50 per box, 10 boxes per case

5 Mil Gloves Powder Free Disposable Latex Gloves Small, Medium, Large or Extra Large. These disposable latex gloves are made with USDA approved materials (for safe food handling). 5 Mil gloves. 100 per box, 10 boxes per case

5 Mil Gloves Lightly Powder Disposable Latex Gloves Small, Medium, Large or Extra Large. These disposable latex gloves are made with USDA approved materials (for safe food handling). 5 Mil gloves. 100 per box, 10 boxes per case

5 Mil Gloves Powder Free Disposable Nitrile Gloves Small, Medium, Large or Extra Large. These disposable nitrile gloves are made with USDA approved materials (for safe food handling). Chemical resistant gloves. 5 Mil gloves. 100 per box, 10 boxes per case

5 Mil Gloves Lightly Powder Disposable Nitrile Gloves Small, Medium, Large or Extra Large. These disposable nitrile gloves are made with USDA approved materials (for safe food handling). Chemical resistant gloves. 5 Mil gloves. 100 per box, 10 boxes per case

Polyethylene Food Handlers Gloves 100/Dispenser box, 10 boxes/case Clear Polyethylene Food Handling Gloves Water tight embossed. Fits either hand. FDA/USDA Accepted. 1.25 mils thick.100 gloves per pack, 10 packs/case 1000 gloves per case. Large, Medium, X Large. Sold by the case

6.5 Mil Gloves Lightly Powder Disposable Vinyl Green Gloves Small, Medium, Large or Extra Large. These disposable vinyl green gloves are made with USDA approved materials (for safe food handling). Chemical resistant gloves. 6.5 Mil gloves. 300 per box, 4 boxes per case Sold by the box.

5 Mil Gloves Lightly Powder Disposable Vinyl Gloves Small, Medium, Large or Extra Large. These disposable vinyl natural color gloves are made with USDA approved materials (for safe food handling). Chemical resistant gloves. 5 Mil gloves. 100 per box, 10 boxes per case. Sold by the box.

338

338



5 Mil Gloves Powder Free Disposable Vinyl Gloves Small, Medium, Large or Extra Large. These disposable vinyl natural color gloves are made with USDA approved materials (for safe food handling). Chemical resistant gloves. 5 Mil gloves. 100 per box, 10 boxes per case. Sold by the box.

5 Mil Gloves Lightly Powder Disposable Blue Vinyl Gloves Small, Medium, Large or Extra Large. These disposable vinyl natural color gloves are made with USDA approved materials (for safe food handling). Chemical resistant gloves. 5 Mil gloves. 100 per box, 10 boxes per case. Sold by the box.

Latex examination gloves, medical grade, 5 mil, powder-free, Small, Medium, Large or Extra Large. These disposable latex gloves are made with Medical Grade approved materials (Medical Grade Gloves). 5 Mil gloves. 100 per box, 10 boxes per case

PVC Gloves 14" Gauntlet Style Glove Smooth finish with light interlock lining single dipped, smooth finish, interlock lined PVC glove high chemical resistant.

PVC Gloves 18" Gauntlet Style Glove Smooth finish with light interlock lining single dipped, smooth finish, interlock lined PVC glove high chemical resistant.

PVC Gloves 14" Gauntlet Style Glove Rough finish with light interlock lining single dipped, rough finish, interlock lined PVC glove high chemical resistant.

Yellow Natural Latex Gloves, 18 mil, flock lined, 12" length, poly bag per pair Gloves are embossed grip on palm and fingers, Available in small, medium, large and extra large sizes. 120 pair /case.

Green Nitrile Gloves 15 Mil Flocked Lined 12" Length, Individually Bagged 12" Length nitrile gloves, meets FFDCA Requirements for Food Contact Nitrile gloves have strong chemical resistance, including petroleum based products. Available in small, medium, large, and extra large. 120 pair/case

339

339

N95V Particulate Respirator, 10/Box

Cooler, Easier Breathing because of valve

Innovative features give your workers added comfort and protection Exhalation valve reduces heat and humidity for comfortable, all-day wear Easily adjustable nose clip provides a secure seal Special filter material enhances breath ability Recommended for applications in non-oil areas NIOSH approved N95 Rated mask 10 per box 12 boxes per case

Comfortable Protection NIOSH approved N95 Rated mask

Reliable respirator provides minimum 95% filter efficiency against solid and non-oil based particulates

Adjustable nose clip offers a secure fit Soft inner shell material and padded nosepiece deliver all-day comfort NIOSH approved N95 Rated mask

20 per box, 12 boxes per case.

Nuisance Dust

Offers relief from irritating pollen, cut grass, animal dander, and other non-toxic airborne particulates

Comfortable dust masks have a metal nose clip that conforms easily for a secure seal

Designed for comfort only, not to be used for lung protection

White non-rated dust mask. Packed 50 per box. 20 boxes per case.

100 % Polyester Mesh Hairnets: Hair Net, Heavyweight Polyester, 100 nets per bag or box, 10 bags or boxes per case. White or Brown. Pricing is per case of 1000. BROWN No. #PMHNBN18=18”, #PMHNBN21=21”, WHITE No. #PMHNWH18=18”, #PMHNWH21=21”, #PMHNWH24=24” #PMHNWH27=27” Ultra fine White 100% nylon mesh hairnet. Packed 100 nets per bag, 10 bags per case. Pricing is per case of 1000. #NMHN18=18”, #NMHN21=21”, #NMHN24=24”, #NMHN27=27”

Lyn Distributing 965 North Redwood Road, North Salt Lake, Utah 84054 801-295-5022

340

340

E.P.A. accepted as“Tamper-Proof.”

Item # R910-tp-10 Metal Item # R903-tp-10 Plastic

These Tamper-Proof Bait Stations allow effective rodent control that meets or exceedsEPA criteria for “Tamper-Proof”. Both come complete with single-bolt locking devices thatsecure the lid with a metal to metal connector which is far superior to a metal to plastic orplastic to plastic connector. Also included is an Allen Key wrench. Both may be used indoorsand outdoors when properly secured.

Product # R903-TP-10 plastic Tamper-Proof Bait Station feature a baffle design to restrictentry by children and non-target animals and help prevent bait from being kicked out by rodents. Madeof tough rigid plastic, which will support a 250-pound person! Unique triangular design allowsplacement in corners or against straight walls. To overcome rat neophobia, these stations incorporateair vents proven to overcome rats’ fear of new places and increase bait acceptance. Two feeding areasthat hold up to 2 pounds of bait each. EPA approved locking hardware is included. Measures 13” L. x17” W. x 4 ½” H. Comes with a warning service log label. Packed 6 per case.

Product # R910-TP-10 metal Tamper-Proof Bait Stations are built to take a beating withheavy-gauge galvanized steel for indoor and outdoor use. Also included is a black plastic insert toinsulate interior against cold metal with separate compartments for bait and water. Fabricated ofheavy-duty galvanized steel, it features a seamless base for structural strength. Holes in base enable itto be secured to floor. A special overhanging Snap-On lid with EPA approved locking device securesthe unit. Packed 12 per case. Additional plastic inserts are available, item # R910ins-10

Product # R913-10 Anchoring Stakes are metal stakes designed for outdoor installation of allBait Stations. Anchoring hardware included. Packed 24 stakes per case.

LYN DISTRIBUTING 965 N. Redwood Rd. NSL, Utah 84054Phone (801)295-5022 Outside SLC area- (800) 366-5022

341

341

KEEPS GLUE BOARDS CLEANNew TRAPPER Tunnel is a plastic protective cover that fits

on Bell Lab’s rat-size TRAPPER Glue Boards. TRAPPER Tunnel keepsdust and debris off the board, keeping its surface tacky longer.An economical means of extending the life of TRAPPER Glue Boards,TRAPPER Tunnel is ideal for use in dusty areas, such as food processingplants and warehouses.TRAPPER Tunnel’s white color gives it a clean and sanitary look. TheTRAPPER Tunnel also hides captured rodents and insects from sight.Made of sturdy, ribbed plastic, TRAPPER Tunnel has tall, invitingentrance holes that can accommodate even the largest rat. This easyaccessibility makes TRAPPER Tunnel and TRAPPER Glue Boards ahighly effective rodent control tool.TRAPPER Tunnel snaps easily on the rat-size TRAPPER Glue Boardsand presents a professional appearance in both commercial andresidential accounts. TRAPPER Tunnel and TRAPPER Glue Boards aresold separately.

Packaging: Carton of 48 tunnels.Product #

TRAPPER TUNNEL

GLUE BOARDS CAPTURE RATS & MICE

Non-toxic TRAPPER Glue Boards capture rats andmice easily and effectively. They are odorless andcontain no poison, making them ideal for food plants,kitchens, hospitals, residences and zoos.TRAPPER Glue Boards possess a superior adhesivethat holds in a wide range of temperatures and willnot sag off the board, allowing it to be used incommercial freezers and unheated areas in the winter.A new “patent pending” design features a lowerprofile and tighter fit along walls where rodentstravel. The smaller edge around the sturdy, plasticboard prevents mice from running along the edge ofthe glue board and avoiding the glue.Along with a smaller edge, the new TRAPPER GlueBoards are slightly shorter in height, yet contain thesame amount of glue.TRAPPER glue is also available in bulk form.

Packaging: Bulk cartons of 48 rat-size trays or 96mouse-size trays; colorful display boxes of 24 x 2bags (rats or mouse); 4 x 1 gal. cans of bulk glue.Product #

TRAPPER GLUEBOARDS

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD, NORTH SALT LAKE, UTAHPHONE (801) 295-5022 OUTSIDE SALT LAKE AREA (800) 366-5022

342

342

LIQUI-TOX II is a liquid concentrate containing the active ingredient,Diphacinone, that kills both rats and mice. LIQUI-TOX IIContains 0.106 percent Diphacinone which can be mixed with a quart ofwater to yield a quart of finished bait with 0.005 percent Diphacinone.LIQUI-TOX II gives exceptional control under dry conditions or when foodis readily available, such as in grain elevators and food storage warehouses.Rats need water daily and mice will drink when it is available.LIQUI-TOX II can be placed in containers, such as chicken founts and plasticbait stations, for bait placement.Packaging: Cartons of 50 x 1.7 oz. pouches

DIRECTIONS FOR USEIt is a violation of Federal law to use this productin a manner inconsistent with its labeling.READ THIS LABEL: Read this entire label andfollow all use directions and use precautions.IMPORTANT: Do not expose children, pets, orother nontarget animals to rodenticides. To help toprevent accidents:1. Store product not in use in a location out of reachof children and pets.2. Apply bait in locations out of reach of children,pets, domestic animals and nontarget wildlife, or intamper resistant bait stations equipped fordispensing liquid rodenticide baits. These stationsmust be resistant to destruction by dogs and bychildren under six years of age, and must be used ina manner that prevents such children from reachinginto bait compartments and obtaining bait. If baitcan be shaken from stations when they are lifted,units must be secured or otherwise immobilized.Even stronger bait stations are needed in areas opento hoofed livestock, raccoons, bears, or otherpotentially destructive animals, or in areas prone tovandalism.3. Dispose of product container and unused,spoiled, and unconsumed bait as specified on thislabel.USE RESTRICTIONS: This product may be usedto control Norway rats (Rattus norvegicus), roofrats (R. rattus), and house mice (Mus musculus) inhomes; in industrial, agricultural, and commercialbuildings; and in similar manmade structures. Donot use LIQUI-TOX II in any area where there is apossibility of contaminating food or surfaces thatcome in direct contact with food.MIXING DIRECTIONS: Using scissors, cut one1.68 fl. oz. package where indicated and pour itscontents into one quart (32 fl. oz.) of water. MixLIQUI-TOX II and water thoroughly.SELECTION OF TREATMENT AREAS:Determine areas where rats and mice will mostlikely find and consume bait. Generally, these areasare along walls, by gnawed openings, besideburrows, in corners and concealed places, betweenfloors and walls, or in locations where or their signshave been seen.APPLICATION DIRECTIONS:RATS: Provide a minimum of 1-pint (16 fl. oz.) ofLIQUI-TOX II in each dispenser (suitably-equipped bait station, chick fount, or other suitabledevice). If infested area is large, or if rat populationappears to be high, use dispensers at severallocations. Space dispensers and refill them asneeded to ensure that the bait is exposed in allinfested areas where it can be used without puttingnontarget organisms at risk.

MICE: Provide ½ pint (8 fl. oz.) placements ofLIQUI-TOX II in suitably-equipped baitstations, chick founts, or other appropriatevessels. Place dispensers at intervals of 8-12feet in all infested areas where bait can be usedwithout putting nontarget organisms at risk.RATS & MICE: Replace contaminated orspoiled bait immediately. Collect and properlydispose of dead animals and bait that is nolonger needed. Continue treatments as long astarget species are being controlled by bait andnontarget species that are not at risk.PRECAUTIONARY STATEMENTSHAZARDS TO HUMANS & DOMESTICANIMALSCAUTION: Keep away from humans, domesticanimals and pets. If swallowed, this materialmay reduce the clotting ability of the blood andcause bleeding. Exposure during pregnancyshould be avoided. Avoid contact with skin,eyes, or clothing.STATEMENT OF PRACTICALTREATMENTIF SWALLOWED: Call a physician or Poisoncontrol center immediately. Drink 1 or 2glasses of water and induce vomiting bytouching back of throat with finger. Do notinduce vomiting or give anything by mouth toan unconscious person.IF IN EYES: Flush eyes with plenty of water.Call a physician if irritation persists.IF ON SKIN: Wash with plenty of soap andwater.NOTE TO PHYSICIAN: If ingested,administer Vitamin K1 intramuscularly ororally as indicated in bihydroxycoumarinoverdoses. Repeat as necessary based onmonitoring of prothrombin times.ENVIRONMENTAL HAZARDSKeep out of lakes, streams, or ponds. Do notcontaminate water by cleaning of equipment ordisposal of wastes.STORAGE AND DISPOSALDo not contaminate water, food, or feed bystorage or disposal.STORAGE: Store only in original, in a dryplace inaccessible to children and pets.PESTICIDE DISPOSAL: Wastes resultingfrom the use of this product may be disposed ofon site or at an approved waste disposalfacility.CONTAINER DISPOSAL: Securely wraporiginal container in several layers ofnewspaper and discard in trash.

SPECIMEN LABEL

LIQUI-TOX II

Mix contents of pouch with 1quart ofwater

KILLS RATS AND MICE

Active ingredient:Sodium salt of Diphacinone;(2-Diphenylacetyl-1,3-indiandione) .1.106%INERT INGREDIENTS…………..99.894%TOTAL ………………………….100.000%


CAUTION(See right panel for additionalprecautionary statements)

EPA EST. NO. 12455-WI-1EPA REG. NO. 12455-61Mfg. By Bell Laboratory Inc.

Sold ByLyn DistributingPhone 1-800-366-5022

LIQUI-TOX IIWATER SOLUBLE

LIQUID BAIT

343

343

Available with: Clear Plastic Lid •• Clear Plastic End Panel

Catch up to 15 mice in one setting without ever touching the mice!! This device caters to thenatural curiosity of the mouse to investigate the bait, each mouse becomes 'caught' inside.Safe from curious pets and children, all working parts of this unit are enclosed. You needonly check every couple of days for contents and disposal. Made of heavy galvanized steel -the Ketch-All Mouse Trap will last many years.

CLEAR VIEW LID

FOR BETTER TRAP MONITORINGEFFICIENCY. With clear view lids, you save the time it takes to pull back lids andcheck for catch, making inspection quicker and more efficient. 12 per case

GLUE TRAP

Holds mice and foreign material such as feces, hairs and potentially airborneparticles in place. THIS ALLOWS EASIER, FASTER, MORE SANITARY PESTREMOVAL. 100 per case

CLEAR VIEW END PLATE

INCREASES THE EASE OF MONITORING. To use, remove galvanized end plateand replace with clear view end plate, embossed side out. Make sure the clear viewend plate is securely inserted into the bottom of the KETCH-ALL. 48 per case


344

344

SERVICE LABELS

PROVIDE AN EASY WAY TO KEEP VITAL RECORDS ON EACHTRAP. Both service labels may be applied to the top or underside of theKETCH-ALL and STICK-ALL lids. Labels can also be places on theperimeter surfaces of each trap. Each label may be placed on the insidecross bar of the KETCH-ALL. 100 per case

PROTECTOR

The protector is a heavy steel guard that protects the KETCH-ALL fromcrushing by machinery, forklifts or foot traffic. 6 per case

POSITION STRAP

When inspectors insist that your KETCH-ALL remain in one location. 12per case

WALL GUARD

Provides protection for the KETCH-ALL from placement of pallets, boxes,bags and other storage methods. 12 per case

With the BIG SNAP-E, it's the end of the road for rats, gophers,chipmunks, ground squirrels and other pesky rodents. The quick responsetime makes certain that once caught, the rodent stays caught! Two pre-formed holes in the trap base allow for surface mounting. Fingers nevertouch the rodent.The SNAP-E- MOUSE-TRAP and BIG SNAP-E-RAT-TRAP are made ofdurable polystyrene and steel. They both resist stains and odors commonin old-fashioned wooden traps, are easy to clean and can be reused foryears of service. They are simple, safe and sanitary.

Quality Handmade Live Animal Traps KAGE-ALL live animal traps are the safe and humane way to catch andkeep animals. KAGE-ALL traps are custom designed to trapeverything from sparrows to coyotes. Selected styles are made of durable zinctreated and black coated steel heavy-gauge construction for years of use. Innovative features of the heavy-duty animal traps include: gravity actiondoor with patented spring loaded latch; guarded handle for safe and easytransport; protected bait area; large trip treadle grate; ground guard to keeplatch and door free from debris; steel door stop to keep trap locked untiloperator release; and protected finish to reduce reflections and light flashes.

Lyn Distributing •• 965 North Redwood Road, • North Salt Lake, Utah 84054Phone Salt Lake Area 295-5022 Anywhere else in the U.S.A. 1-800-366-5022

345

345

Bell laboratories introduces its newest single-feeding anticoagulant rodenticide, FINAL Rodenticide, with the powerfulactive ingredient Brodifacoum. FINAL combines the superior formulating expertise of Bell Laboratories with thestrongest anticoagulant available on the market today. Containing more than 16 human food-grade inert ingredients.Final is more palatable than other Brodifacoum baits on the market.Effective on rats and mice, FINAL with Brodifacoum is especially successful in cleaning out tough mouse infestationswhere populations are difficult to control or where resistance is suspected. Pelleted FINAL Rodenticide is colored red andis packaged in place pacs that rats and mice open themselves or in bulk in plastic pails. PACKAGING 100 X 25 G.PLACE PACS - EPA REG. NO. 12455-91 OR 25 LB. BULF PLASTIC PAIL - EPA REG. NO.12455-90

Specimen LabelDIRECTIONS FOR USE

It is a violation of Federal Law to use this product ina manner inconsistent with its labelingREAD THIS LABEL: Read this entire label andfollow all use directions and use precautions.IMPORTANT: Do not expose children, pets, orother nontarget animals to rodenticides. To help toprevent accidents:1. Store product not in use in a location out of

reach of shildren and pets.2. Apply bait in locations out of reach of children,

pets, domestic animals and nontarget wildlife,or in tamper-resistant bait stations. Thesestations must be resistant to destruction bydogs and by children under six years of age,and must be used in a manner that preventssuch children from reaching into baitcompartments obtaining bait. If bait can beshaken when they are lifted, units must besecured or otherwise immobilized. Evenstronger bait stations are needed in areas opento hoofed livestock, raccoons, bears, or otherpotentially destructive animals, or in areasprone to vandalism.

3. Dispose of product container and unused,spoiled, and unconsumed bait as specified onthis label.

USE RESTRICTIONS:For control of Norway rats, root rats and house micein and around homes, industrial, commercial,agricultural and public buildings, and similarmanmade structures. FINAL Rodenticide may alsobe used in transport vehicles (ships, trains, aircraft)and in and around related port or terminal buildings.This product may also be used in alleys. Do not usein sewers. Do not place bait in areas where there is apossibility of contaminating food or surfaces thatcome in direct contact with food. Do not broadcastbait. When this product is used in USDA inspectedplants, the applicator is required to use tamper-resistant bait stations.SELECTIONS OF TREATMENT AREAS:Determine areas where rats or mice will most likelyfind and consume the bait. Generally, these arealong walls, by gnawed openings, in or besideburrows, in corners and concealed places, betweenfloors and walls, or in locations where rodents ortheir signs have been seen. Protect bait from rain orsnow. Remove as much alternative food as possible.

FinalFinalRODENTICIDERODENTICIDE

KILLS RATS AND MICEKILLS RATS AND MICEKills Warfarin Resistant Norway RatsKills Warfarin Resistant Norway Rats

and House Miceand House MiceNorway rats and house mice may consume a

lethal dose in one feeding with first deadrodents appearing four or five days after

treatment begins.ACTIVE INGREDIENTS: Brodifacoum; 3-(3-(4'-Bromo-(1,1'-biphenyl)-4-y1) -1,2,3,4-tetrahydro-1-naphthalenyl)-4-hydroxy-2h-1-benzopyran-2-one…………….0.005%INERT INGREDIENTS………….99.995% TOTAL 100.00% *Contains Denatonium Benzoate

KEEP OUT OF REACH OF CHILDRENCAUTION

STATEMENT OF PRACTICAL TREATMENTIf Swallowed. Call physician or Poison ControlCenter. Drink 1 or 2 glasses of water and inducevomiting by touching back of throat with finger. Ifperson is unconscious, do not give anything bymouth and do not induce vomiting. If on skin: Washwith plenty of soap and water. Get medical attentionif symptoms persist. If in eyes: Flush eyes withplenty of water. Call a physician if irritationpersists.

Note To PhysicianIf swallowed this material may reduce the clottingability of blood and cause bleeding. If ingested,administer Vitamin K, intramuscularly or orally, asindicated in bishydroxycoumarin overdoses. Repeatas necessary based on monitoring of prothrombintimes. For 24 hour emergency medical advice,call 1-800-228-5635 ext. 311Mfg. By BELL LABORATORIES, INC.EPA EST. NO. 12455-WI-1EPA REG. NO. 12455-90

DIRECTIONS FOR USEAPPLICATION DIRECTIONS:RATS: apply 3 to 16 ounces of bait (usually atintervals of 15 to 30 feet) per placemant. Maintainan uninterrupted supply of fresh bait for at least 10days or until signs of rat activity cease.HOUSE MICE: Apply 1/4 to 1/2 oz. (1 to 2 leveltablespoons) of bait per placement at 8 to 12 footintervals. Larger placements (up to 2 ounces) maybe needed at points of very high mouse activity.Maintain an uninterrupted supply of fresh bait for atleast 15 days or until signs of mouse activity cease.RATS/MICE: Replace contaminated or spoiled baitimmediately. Collect and dispose of all deadanimals and leftover bait properly. To preventreinfestation, limit sources of rodent food, water, andharborage as much as possible. If reinfestation doesoccur, repeat treatment. Where a continuous sourceof infestation is present, establish permanent baitstations and replenish as needed.

PRECAUTIONARY STATEMENTSHAZARD TO HUMANS AND DOMESTICANIMALS CAUTION: May be harmful or fatal ifswallowed or absorbed through the skin. Causesmoderate eye irritation. Avoid contact with eyes,skin or clothing. Wash thoroughly with soap andwater after handling bait.

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD NORTH SALT LAKE, UTAH 84054PHONE IN SALT LAKE AREA 295-5022 ANYWHERE IN THE U.S.A. 1-800-366-5022

Final Rodenticide

New Rodenticide with Brodifacoum

346

346

CONTRAC Rat & Mouse Bait is a single-feeding rat and mouse bait, that is unsurpassed in rodent acceptance and control.Specially formulated with the optimal blend of food-grade inert ingredients to yield a highly palatable bait. CONTRACBait stays fresh and palatable in dry areas. The meal bait pieces fit easily into burrows, bait stations and tight baitingplaces. CONTRAC Meal Bait contains the single-feeding anticoagulant, Bromadiolone, which is less toxic to non-targetanimals in primary and secondary poisoning situations than other single-feeding anticoagulants. It is colored blue andauthorized by USDA for use in federally inspected meat and poultry plants. PACKAGING 25 LB. Plastic Pail - EPA REG.NO.12455-75






USE RESTRICTIONS:For control of Norway rats, root rats and house micein and around homes, industrial, commercial,agricultural and public buildings, and similarmanmade structures. CONTRAC Meal Bait mayalso be used in transport vehicles (ships, trains,aircraft) and in and around related port or terminalbuildings. This product may also be used in alleys.Do not use in sewers. Do not place bait in areaswhere there is a possibility of contaminating food orsurfaces that come in direct contact with food. Donot broadcast bait. When this product is used inUSDA inspected plants, the applicator is required touse tamper-resistant bait stations.SELECTIONS OF TREATMENT AREAS:Determine areas where rats or mice will most likelyfind and consume the bait. Generally, these arealong walls, by gnawed openings, in or besideburrows, in corners and concealed places, betweenfloors and walls, or in locations where rodents ortheir signs have been seen. Protect bait from rain orsnow. Remove as much alternative food as possible.

ContracContracMeal BaitMeal Bait




treatment begins.ACTIVE INGREDIENTS: Bromadiolone; 3-(3-(4'-Bromo-(1,1'-biphenyl)-4-y1) -3-hydroxy-1-phenylpropyl)-4-hydroxy-2h-1-benzopyran-2-one………………….0.005%INERT INGREDIENTS………….99.995% TOTAL 100.00% *Contains Denatonium BenzoateKEEP OUT OF REACH OF CHILDREN

CAUTIONSTATEMENT OF PRACTICAL TREATMENTIf Swallowed. Call physician or Poison ControlCenter. Drink 1 or 2 glasses of water and inducevomiting by touching back of throat with finger. Ifperson is unconscious, do not give anything bymouth and do not induce vomiting. If on skin: Washwith plenty of soap and water. Get medical attentionif symptoms persist. If in eyes: Flush eyes withplenty of water. Call a physician if irritationpersists.


DIRECTIONS FOR USEAPPLICATION DIRECTIONS:

RATS: apply 3 to 16 ounces CONTRAC Meal Bait(usually at intervals of 15 to 30 feet) per placemant.Maintain an uninterrupted supply of fresh bait for atleast 10 days or until signs of rat activity cease.HOUSE MICE: Apply ¼ to ½ ounce of bait perplacement at 8 to 12 foot intervals. Largerplacements (up to 2 ounces) may be needed at pointsof very high mouse activity. Maintain anuninterrupted supply of fresh bait for at least 15 daysor until signs of mouse activity cease.RATS/MICE: Replace contaminated or spoiled baitimmediately. Collect and dispose of all deadanimals and leftover bait properly. To preventreinfestation, limit sources of rodent food, water, andharborage as much as possible. If reinfestation doesoccur, repeat treatment. Where a continuous sourceof infestation is present, establish permanent baitstations and replenish as needed.



Contrac Rat & Mouse MealBaitOutstanding Rodent Acceptance

347

347

CONTRAC ALL-WEATHER BLOX is a multi-edged, single-feeding rat and mouse bait, manufactured by a uniqueextrusion process, that is unsurpassed in rodent acceptance and control. Specially formulated with the optimal blend offood-grade inert ingredients and low wax to yield a highly palatable, weatherable bait. CONTRAC BLOX stays fresh andpalatable in wet and dry areas. Ready-to-use CONTRAC BLOX bait pieces feature a patented multi-edge design that giverodents plenty of gnawing edges per piece. The 1-oz. Bait pieces fit easily into burrows, bait stations and tight baitingplaces. A hole through the center lets PCOs wire/hang the bait, or place on bait securing rods for added security.CONTRAC BLOX contains the single-feeding anticoagulant, Bromadiolone, which is less toxic to non-target animals inprimary and secondary poisoning situations than other single-feeding anticoagulants. It is colored blue and authorized byUSDA for use in federally inspected meat and poultry plants. PACKAGING 18 LB. Plastic Pail - EPA REG. NO.12455-79






USE RESTRICTIONS:For control of Norway rats, root rats and house micein and around homes, industrial, commercial,agricultural and public buildings, and similarmanmade structures. CONTRAC BLOX may alsobe used in transport vehicles (ships, trains, aircraft)and in and around related port or terminal buildings.This product may also be used in alleys. Do not usein sewers. Do not place bait in areas where there is apossibility of contaminating food or surfaces thatcome in direct contact with food. Do not broadcastbait. When this product is used in USDA inspectedplants, the applicator is required to use tamper-resistant bait stations.SELECTIONS OF TREATMENT AREAS:Determine areas where rats or mice will most likelyfind and consume the bait. Generally, these arealong walls, by gnawed openings, in or besideburrows, in corners and concealed places, betweenfloors and walls, or in locations where rodents ortheir signs have been seen. Protect bait from rain orsnow. Remove as much alternative food as possible.

Contrac Contrac BloxBloxALL-WEATHERALL-WEATHER




treatment begins.ACTIVE INGREDIENTS: Bromadiolone; 3-(3-(4'-Bromo-(1,1'-biphenyl)-4-y1) -3-hydroxy-1-phenylpropyl)-4-hydroxy-2h-1-benzopyran-2-one………………….0.005%INERT INGREDIENTS………….99.995% TOTAL 100.00% *Contains Denatonium Benzoate


STATEMENT OF PRACTICAL TREATMENTIf Swallowed. Call physician or Poison ControlCenter. Drink 1 or 2 glasses of water and inducevomiting by touching back of throat with finger. Ifperson is unconscious, do not give anything bymouth and do not induce vomiting. If on skin: Washwith plenty of soap and water. Get medical attentionif symptoms persist. If in eyes: Flush eyes withplenty of water. Call a physician if irritationpersists.


DIRECTIONS FOR USEAPPLICATION DIRECTIONS:RATS: apply 3 to 16 CONTRAC BLOX(usually atintervals of 15 to 30 feet) per placemant. Maintainan uninterrupted supply of fresh bait for at least 10days or until signs of rat activity cease.HOUSE MICE: Apply 1 block of bait perplacement at 8 to 12 foot intervals. Largerplacements (up to 2 blocks) may be needed at pointsof very high mouse activity. Maintain anuninterrupted supply of fresh bait for at least 15 daysor until signs of mouse activity cease.RATS/MICE: Replace contaminated or spoiled baitimmediately. Collect and dispose of all deadanimals and leftover bait properly. To preventreinfestation, limit sources of rodent food, water, andharborage as much as possible. If reinfestation doesoccur, repeat treatment. Where a continuous sourceof infestation is present, establish permanent baitstations and replenish as needed.



Contrac Blox ALL-WEATHER

Outstanding Rodent Acceptance

348

348

APC-10

LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, Utah. 84054Phone Salt Lake Area 295-5022 www.lyndist.com Outside Salt Lake Area 1-800-366-5022

• pH controlled• Low foaming – won’t harm

vacuum• Contains corrosion inhibitors• Contains no non-ionic

surfactants• Contains soil anti-redepositing

agents• U.S.D.A. authorized

Fast Acting – Free Rinsing – Highly Concentrated – Pleasant Fragrance

This product is a truly all-purpose concentrated detergent for use on every surfacenot harmed by water. Its controlled sudsing action quickly removes dirt, greaseand grime, leaving the surface film-free. Excellent for use in automatic scrubbingmachines. It is non-corrosive and non-flammable. This detergent is a synergisticblend of anionic and cationic surfactants along with special sequesterants andemulsifiers. The high quality of detergent builders in this product keep soilsuspended for easy pickup by machine vacuums or when used with a wet mop.Its superior soil penetration and retention allows it to be used at very low cost pergallon use dilutions. This product may be used with hard or soft water.

Use dilutions are as follows. Heavy soil - dilute 1 part concentrate with 35 partswater. Medium soil -1 part concentrate with 64 parts water. Light soil - 1 partconcentrate with 128 parts water. This product is authorized by the USDA foruse in federally inspected meat and poultry plants. Classification A-4 as a walland floor cleaner for use in all departments. Do not use this product on waxedfloors, the degreasing and cleaning quality of this product will dull or removewax.

349

349



vacuum• Contains corrosion inhibitors• Contains no non-ionic

surfactants• Contains soil anti-redepositing

agents• U.S.D.A. authorized

Fast Acting – Free Rinsing – Highly Concentrated – Pleasant Fragrance –Space Saver - Freight Saver

This product is a truly all-purpose concentrated detergent for use on every surfacenot harmed by water. Its controlled sudsing action quickly removes dirt, greaseand grime, leaving the surface film-free. Excellent for use in automatic scrubbingmachines. It is non-corrosive and non-flammable. This detergent is a synergisticblend of anionic and cationic surfactants along with special sequesterants andemulsifiers. The high quality of detergent builders in this product keep soilsuspended for easy pickup by machine vacuums or when used with a wet mop.Its superior soil penetration and retention allows it to be used at very low cost pergallon use dilutions. This product may be used with hard or soft water.



APC-10 Double Concentrate350

350

SUPER CONCENTRATE AUTO DETERGENT AS-1000is a complex formula consisting of detergents, wetting agents, water softeners, and rinse additives to effectively clean automotive vehicles. AS-1000 removes heavily accumulated grime and road film, rinses thoroughly, and will not harm automotive finishes. AS-1000 has a controlled pH to insure that there are no environmental concerns with the product that goes down drains. DIRECTIONS: FOAMING BRUSH--AS-1000 should be diluted with water 1 part AS-1000 to 400 parts water for foaming brush systems. This dilution should give rich dense foam when injected with air for foaming brushes. This dilution will clean bugs and road film off automotive surfaces, it will produce a pleasant fragrance while being used. AS-1000 should be rinse with clean clear cold water after being used. AS-1000 is safe on all automotive finishes. AS-1000 contains no free alkali. AS-1000 is biodegradable and is free rinsing. AUTOMATIC CAR WASHES--AS-1000 should be diluted with water 1 part AS-1000 to 1000 parts water. AS-1000 is designed for use with pressure wash systems. AS-1000 is effective and economical to use. AS-1000 cleans cars, trucks, and buses rapidly and effectively. AS-1000 will not gum up or corrode application equipment. AS-1000 may be diluted up to 1 part AS-1000 to 2000 parts water for light soils. Always adjust the dilution of AS-1000 to the amount needed to do the job you desire, both economically and effectively.

PROPERTIES COLOR.................…………………..RED ODOR..................…………………..LIME FOAM STABILITY.……......EXCELLENT RINSABILITY........………..VERY GOOD SOAP CONTENT.....………..........NONE pH.......................…………….………..8.5 DENSITY.................……………….....8.5 HARD WATER TOLERANT..….......YES

SAFETY KEEP AWAY FROM CHILDREN FOR INDUSTRIAL AND INSTITUTIONAL USE ONLY DO NOT TAKE INTERNALLY CONTROLLED pH FOR THE ENVIRONMENT

LYN DISTRIBUTING 965 No. Redwood Rd. No. Salt Lake, Ut. 84054Phone 295-5022 Outside Salt Lake Area 800-366-5022

351

351

DESCRIPTION: Attention is an economical light-duty cleaner. This controlled suds cleaner is ideal for mop and pail, brush, or sponge cleaning applications. This general purpose cleaner is effective against a variety of soils, and safe on all washable hard surfaces. Attention is non-phosphate, biodegradable, and is authorized by USDA for use in federally inspected meat and poultry plants. FEATURES: • No solvents • Controlled suds • Non phosphate • Biodegradable

• No free alkali • Nonflammable • Free rinsing

DIRECTIOINS: For use by hand, mop and bucket, or rotary disc machine cleaning. Do not allow cleaning solution to dry before rinsing. APPLICATIONS:• Tables • Chairs • Walls • Doors

• Counter tops • Light fixtures • Floor

CAUTIONS: Avoid eye contact If splashed in eyes, flush with water for 10 minutes. If irritation persists, consult a physician. Use rubber gloves and eye protection for hand application. TECHNICAL DATA: Appearance pH Density Odor

Yellow liquid pH = 10.0 0.2 8.6 lbs. / gal. Citrus

Stability: Heat stable 140° F @24 hrs. RECOMMENDED STARTING DILUTIONS: Manual Cleaning Light soil Moderate soil Heavy soil Machine Cleaning Moderate soil Heavy soil

1 to 30 (4ozs./gal.) 1 to 15 (8 ozs. /gal.) 1 to 7 (16 ozs. /gal.) 1 to 30 (4 ozs. /gal.) 1 to 15 (8 ozs. /gal.)

LYN DISTRIBUTING 965 No. Redwood Road No. Salt Lake, UT 84054 Phone (801) 295-5022 Outside Salt Lake Area 1(800) 366-5022

ALL PURPOSE CLEANER CONTROLLED pH NO FREE ALKALI

352

352

BATTERY CLEANER & NEUTRALIZER

REDUCES CURRENT LEAKAGE DUE TO DIRT AND CORROSION DEPOSITS. PENETRATES THRU CORROSION

AND NEUTRALIZES ACID RESIDUE. Biodegradable, non-corrosive and environmentally safe. Easy to apply and safe to use on metal, plastic and rubber. Complies with OSHA Regulation 1917.157(g). Use on rollers, stands, forklifts, under battery racks and floors

Minimizes safety risks by eliminating acid burns and shock. Extends the life of the battery and material handling equipment Eliminates trickle discharges to ensure optimum performance Neutralizes, degreases and cleans equipment batteries

USE ON ALL BATTERIES IN: FORKLIFTS, TRUCK LINES, FLEET CAR OPERATIONS, CONSTRUCTION EQUIPMENT, SCHOOL BUSES, MARINE EQUIPMENT, AIRCRAFT, STORAGE BATTERIES, AND GOLF CARTS. AFTER USING THIS PRODUCT LET EQUIPMENT DRY AND SEAL BATTERY AND SUROUNDING AREA WITH BATTERY COATER TO PROECT SURFACES. THIS PRODUCT WILL CLEAN GREASE AND DIRT FROME BATTERY CASES AND BOXES. DIRECTIONS FOR USE: Dilute this product 1 part to 5 - 10 parts hot water to clean grease and grime from batteries. Spray on battery and battery box let set for 2 to 5 minutes then spray off with pressure washer or hose with nozzle on the end. For heavy grease or oil deposits agitate with brush then pressure wash off. This product contains a corrosion preventative material that helps stop rusting of bare metal. This product may be used through battery cleaning machines. It will neutralize battery acid and clean batteries and battery cases. HMIS RATING: Health-1; Flammability-0; Reactivity-0; Personal Protection-B. Spill Or Leakage Procedures: Avoid eye or skin contact. Contain spill & carefully neutralize with acetic acid. Soak up in absorbent material & place in properly labeled non-leaking containers for proper disposal. Small amounts may be rinsed down the drain. WARNING: Eye and skin irritant. KEEP OUT OF REACH OF CHILDREN : Avoid contact with skin and eyes. If eye contact occurs, flush with water for 15 minutes. If irritation persists, consult a physician. If skin contact occurs, remove contaminated clothing. Wash with soap and warm water. If irritation persists, consult a physician. Do not take internally. If swallowed, give 1 to 2 glasses of water and call a physician. Lyn Distributing 965 No. Redwood Road No. Salt Lake, Ut. 84054 Phone 801-295-5022

353

353

BUTYL FLOOR & EQUIPMENT CLEANER / DEGREASER

CONCENTRATE!

B.F.E. instantly dissolves heavy dirt, grime, oil, and grease deposits.

Shop Floors: This multi-purpose cleaner and degreaser contains a high quality butyl combined with special detergents and builders for superior performance in hot or cold water. B.F.E. contains a special rinse additive and special anti-redepositing agents to clean and rinse without leaving a residue. When using B.F.E. dilute in warm or hot water for best performance. Spray brush or mop on, and allow the cleaner to penetrate and loosen deposits, then flush away with a clean water rinse. B.F.E. may be diluted from 1 part B.F.E. to 200 parts water. For greasy shop floors dilute 1 part to 5 parts water. If using a floor machine - B.F.E. may be diluted 1 part to 25 parts water. Remove difficult or hard deposits by allowing the B.F.E. solution to saturate for approximately five minutes, rub gently with stiff brush and rinse. Equipment : For degreasing equipment and greasy parts dilute B.F.E. 1 part to 15 parts water. Spray on surface and let product work for 5 to 8 minutes then rinse with high pressure wash or steam cleaner. B.F.E. also works well in a hot soak tank. This product is a amazing cleaner / degreaser. When using B.F.E. use through a proportioning device if possible. This will make the product go farther because it will always be used properly. Try this product it is a labor saver and cost cutter, people are amazed at the cleaning properties of B.F.E. Lyn Distributing 965 No. Redwood Road. No. Salt Lake, Utah 84054 Phone (801)295-5022 Outside Salt Lake Area 1-800-366-5022

354

354

SUPER STRIPPER!Fast Action for theNon-Routine StrippingJob.

1. PenetratorsProvide quickpenetration oftough floor finish.

2. DissolversChemically breakthe bonds of oldfinish and wax.

3. EmulsifiersReturn old solidsto liquid statequickly forcomplete removal

Old, tough floor finish has met its matchwith this fast action, heavy-duty stripper. Itis specially formulated for the removal ofhigh solids finishes, “case hardened”polymer build-up, hard metal crosslinkedfinish/wax, multiple floor finish applicationsand repeated spray buffing / recoating.

An energy saver, the outstandingchemical action of this stripper significantlyreduces manpower needed. Unlikeconventional strippers where hot water is amust, this product performs excellentlyunder cold or hot water conditions.

Our super stripper cuts throughtoday’s toughest jobs as easy as 1,2,3 —1) Penetrators. 2) Dissolvers and3) Emulsifiers. Together these hard-working components get the job done fast.

Stripper

Finish

Floor

Breakdown super concentrated stripper may be diluted 1 part superconcentrate to 3 parts water, this will make regular concentrated wax

stripper. This regular concentrate may be diluted 1 part stripper to 5 – 10parts water. Always adjust the dilution of a wax stripper to level needed

for a specific job. Use through a Lyn Distributing auto proportioner set at25 to 30 parts water to 1 part concentrate.

The above three-step process insures complete, in-depth removal of medium to heavy build-ups –right down to the surface without repeated scrubbing. The high concentration of surface activeingredients is the key to its effectiveness…67% greater than conventional strippers! This stripper iseasy to use. It has a pleasant odor, contains no ammonia. It’s biodegradable, nonflammable and lowfoaming. For use with conventional or automatic equipment.


355

355








Stripper

Finish

Floor

Breakdown regular concentrate may be diluted 1 part stripper to 5 – 10parts water. Always adjust the dilution of a wax stripper to level needed




356

356

Special Solvent Shampoo

For Rugs and Carpets

This specially formulated solvent shampoo has been developed for use as a bonnet scrub for rugs and carpets. It cleans quickly and thoroughly and lubricates the pad to prevent damage. Contains optical brighteners to restore original beauty to carpets by enhancing colors. No residue is left to resoil easily.

The bonnet method of cleaning is the fastest, driest way to maintain your carpets. It should not be considered as a deep cleaning procedure like rotary brush shampooing or extraction. One or both of these cleaning methods should be incorporated into your maintenance program on an infrequent basis. But for a speedy way to top clean and remove spots, the bonnet scrub can't be beat. Bonnet scrubbing requires a special shampoo since there is very little detergent solution applied. With the mild action of the well lubricated mop type bonnet pad, the cleaner has to do most of the work. This product removes tough soil even when nearly dry with little or no agitation. Its solvent penetrates petroleum grease and oil and its detergent encapsulates the emulsified oil as well as water based soil to allow them to be vacuumed away easily.

This product contains no harsh alkalis or petroleum solvents which might be harmful to sensitive carpet fibers or backing. It also liberates no obnoxious or irritating odor. This shampoo will not deluster fibers due to its neutral pH.

This remarkable product may also be used as a prespray for traffic lanes when diluted with water or a "water side" spotter when used full strength. Often it is the only product you need to keep your carpets looking great.

DIRECTIONS FOR USE:

BONNET SCRUB - Dilute 1 to 10 up to 1 to 16 in warm water. Spray area ahead of buffer with Bonnet Scrub solution. Soak bonnet in solution and buff. Allow to dry and vacuum thoroughly. SPOTTING - Use straight. Apply a small amount to spotted area and agitate with a soft brush or scraper. Blot with clean absorbent white towel. Apply a small amount of water to spot. agitate and blot again. Repeat process if spot is not completely removed. PRESPRAYING - Dilute from 1 to 4 up to 1 to 8 with water. Spray large spots and traffic lanes with solution. Rake or agitate with a brush. Shampoo, bonnet scrub or extract as desired. LYN DISTRIBUTING 965 No. Redwood Road, No. Salt Lake , Utah 84054 Phone(801) 295-5022 Toll-Free (800)366-5022

Brite Bonnet

357

357

You just cleaned your vehicle and now you are ready for that big road trip. The sun is shinning and your paint is blinding oncoming traffic. As night falls you arrive at your destination. The next morning you go to your car only to find bugs splattered all over your windows, windshield, grill, bumpers and headlights. You think to yourself, when I get home, it will take me hours to remove these bugs. You can sigh a sign of relief with Lyn Bug Away Plus, which is a heavy concentrated cleaner for that hard to remove bug residue. Removing bugs from auto paint, windows and grills has never been easier. Best of all, Lyn Bug Away Plus is safe for all cars and clear coat finishes and will loosen and remove bug residue seconds after application. Enjoy your road trip. Now, you can travel on highways and feel confident that love bugs can be removed safely and effectively.

Directions: Wet auto with water, spray Lyn Bug Away Plus on surface, let the product work for you by waiting 2 to 3 minutes, scrub with sponge or soft brush in back and forth motions and rinse surface or drive thru automatic car wash tunnel.

WARNING: Eye and skin irritant. KEEP OUT OF REACH OF CHILDREN : Avoid contact with skin and eyes. If eye contact occurs, flush with water for 15 minutes. If irritation persists, consult a physician. If skin contact occurs, remove contaminated clothing. Wash with soap and warm water. If irritation persists, consult a physician. Do not take internally. If swallowed, give 1 to 2 glasses of water and call a physician.

LYN DISTRIBUTING 965 No. Redwood Road, North Salt Lake, Utah 84054 Phone in Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

Lyn Bug Away Plus Heavy concentrated cleaner for that hard to remove bug residue.

Contains Natural citrus oils.

358

358

CHOICE NEUTRALCLEANER CONCENTRATE

CHOICE NEUTRAL DETERGENT concentrate for use on all washable surfaces.Mild, neutral cleaner concentrate, with a guaranteed pH of 7.0 to 8. This product containsonly biodegradable surfactants and no phosphates.

CHOICE CONCENTRATE is a multi-purpose cleaner concentrate that is easy and pleasantto use - it will not harm floor finishes, irritate hands or skin, or give off obnoxious fumes.Designed to perform most ordinary cleaning chores with maximum economy, CHOICECONCENTRATE is harmless to all common surfaces. It may be diluted from 1:20 for heavydirt removal, up to 1:100 for damp mopping and other light cleaning jobs. Designed for useon linoleum, rubber, asphalt, vinyl, marble, terrazzo, or wood floors, leather, plastic, and vinylupholstery, painted walls, floors, and other painted surfaces, ceramic, plastic, and porcelaintile, desks, tables, venetian blinds, and other furniture and woodwork.

Application:For greasy floors or other heavy jobs, dilute CHOICE CONCENTRATE 1:20 with warm orhot water. For cleaning floors, lockers, and other medium cleaning jobs, dilute 1:40, anddilute up to 1:100 for light cleaning jobs. At high dilutions, no rinse is required. Apply byspraying, mopping, of swabbing, and allow to penetrate deposits for several minutes. Heavydeposit removal will be speeded by light scrubbing.

LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, Utah. 84054Phone Salt Lake Area 295-5022 www.lyndist.com Outside Salt Lake Area 1-800-366-5022

USE ON WAXED FLOORS, WALLS,VINYL, LEATHER, BLINDS, DESKS,

TABLE TOPS, ETC.

359

359


• Cleans Glass, Mirrors, Chrome & Appliances

• Removes Dust, Dirt, Smoke & Film • Ready To Use – No Mixing Or Mess • Pleasant Fragrance – Pleasant To Use

This product is formulated to give any glass and many other hard surfaces that fresh sparkling clean shine. It cleans leaving a nice fresh fragrance. It is excellent in cleaning mirrors, windows, glass counters, shelves, display glass-ware, and plastic articles and many more applications for dust and smudge spot removal. DIRECTIONS FOR USE: Ready to use, or may be diluted 1part to 3 parts soft water. Pour into dispensing bottle and spray onto glass surface. Wipe clean with soft cloth or paper towel. Do not use paper wipers as many wipers are treated with chemicals and may cause smudging. Technical Data: • Liquid glass cleaner • Clear Liquid • Green in Color • 8. Pounds per gallon • Non-Flammable • pH: 7 • Special Blend Of Cleaners, Alcohol, And Detergent LYN DISTRIBUTING 965 North Redwood road North Salt lake, UT 84054 Phone: (801)295-5022 Outside Salt Lake area 800-366-5022

360

360


• Removes Dust, Dirt, Smoke & Film • Concentrated 1 Gallon Makes 10

Gallons • Pleasant Fragrance – Pleasant To Use

This product is formulated to give any glass and many other hard surfaces that fresh sparkling clean shine. It cleans leaving a nice fresh fragrance. It is excellent in cleaning mirrors, windows, glass counters, shelves, display glass-ware, and plastic articles and many more applications for dust and smudge spot removal. DIRECTIONS FOR USE: Concentrated for economy, must be diluted 1part to 10 parts soft water. After dilution, pour into dispensing bottle and spray onto glass surface. Wipe clean with soft cloth or paper towel. Do not use paper wipers as many wipers are treated with chemicals and may cause smudging. Technical Data: • Liquid glass cleaner • Clear Liquid • Blue in Color • 7. Pounds per gallon • Flammable • pH: 7 • Special Blend Of Cleaners, Alcohol, And Detergent LYN DISTRIBUTING 965 No. Redwood Road No. Salt Lake, UT 84054Phone: Salt Lake Area (801)295-5022 Outside Salt Lake Area 800-366-5022

361

361


• Removes Dust, Dirt, Smoke & Film • Concentrated 1 Quart Makes 5

Gallons • Pleasant Fragrance – Pleasant To Use

This product is formulated to give any glass and many other hard surfaces that fresh sparkling clean shine. It cleans leaving a nice fresh fragrance. It is excellent in cleaning mirrors, windows, glass counters, shelves, display glass-ware, and plastic articles and many more applications for dust and smudge spot removal. DIRECTIONS FOR USE: Concentrated for economy, must be diluted 1part to 20 parts soft water. After dilution, pour into dispensing bottle and spray onto glass surface. Wipe clean with soft cloth or paper towel. Do not use paper wipers as many wipers are treated with chemicals and may cause smudging. Technical Data: • Liquid glass cleaner • Clear Liquid • Blue in Color • 7. Pounds per gallon • Flammable • pH: 7 • Special Blend Of Cleaners, Alcohol, And Detergent LYN DISTRIBUTING 965 No. Redwood Road No. Salt Lake, UT 84054Phone: Salt Lake Area (801)295-5022 Outside Salt Lake Area 800-366-5022

362

362

CAR WASH CONCENTRATE pH BALANCED HIGH FOAMING CLEANER

dilutes 500 to 1

DESCRIPTION: A highly concentrated liquid cleaning formulation containing wetting agents, detergents, and water conditioners for fast penetration and break-up of accumulated soil and grime. Safe guards both truck and car finishes. Will not streak or dull waxed surfaces. Completely safe on all finishes, chrome, rubber, glass, plastics, metal, and aluminum. Will not deteriorate moldings around windshields and doors. Contains no harmful alkalis or solvents.

ADVANTAGES • Removes road film, insect stains, oil and traffic films, mud, exhaust film and salt. • Rinses and air dries freely without streaking

or dulling finishes. • Penetrates and suspends accumulated soil

and grime. • Safe on all finishes including aluminum,

glass and plastic. • Concentrated for high dilution. • Contains no salt for thickening, disperses

readily

DESCRIPTION Blue liquid with citrus odor.

PROPERTIES Toxiicity Low Wetting Ability Excellent Detergency Excellent Foaming Excellent Biodegradability Yes Storage Stability 1 year Corrosion Factor None Flash Point None Solubility in Water 100% pH 7-8

AREAS OF USE • Truck Fleets • Auto & Truck Rental Agencies • Bus & Taxi Fleets • Car Washes • City & County Garages • Golf Courses • Delivery Fleets--Bottling Companys • Equipment Companies • Farm Implement Dealers • Used Car Dealerships • Aircraft Dealers • Boat Dealers

DIRECTIONS FOR USE For light duty cleaning, use 1/4 oz. per gallon of water. For heavy-duty truck washing, use 1 to 2 oz. per gallon of water. For use in a air injected foaming brush use, 2 oz. per gallon of water. Apply to surface with wash mitt or soft brush covering the entire surface then rinse with clear cool water.

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE , UT. 84054 PHONE 801-295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

363

363

DEEP BLUE CONCENTRATE

WINDSHIELD WASHER CLEANER CONCENTRATE FOR USE WHEN FREEZING CONDITIONS ARE NOT A CONCERN! This special product contains a special spreading agent, detergents, and penetrating agents to clean windshields after being diluted with water. Deep Blue is a real money saver when diluted with water for non-freezing conditions. This windshield cleaner will penetrate and clean bugs, dirt, and grime. This product is made to be diluted 1 gallon to 54 - 100 gallons of water. This product may be used for a glass cleaner when diluted 1 to 120 parts water. When diluted with water for summer use this windshield cleaner will cost pennies per gallon. KEEP OUT OF REACH OF CHILDREN: WARNING: Harmful or fatal if swallowed. May irritate eyes. Keep away from high heat. External - Flush with water. Internal - Call a Physician immediately. If splashed in eyes, flush eyes and under eyelids with plenty of cool water.


364

364

DEEP BLUE SUPER CONCENTRATE

WINDSHIELD WASHER CLEANER CONCENTRATE FOR USE WHEN FREEZING CONDITIONS ARE NOT A CONCERN OR MIXING WITH ALCOHOL FOR SUB FREEZING CONDITIONS. This special product contains a special spreading agent, detergents, and penetrating agents to clean windshields after being diluted with water. Deep Blue Super Concentrate is a real money saver when diluted with water for non-freezing conditions. This windshield cleaner will penetrate and clean bugs, dirt, and grime. This product is made to be diluted 6 ounces to 55 gallons of water. This product may be used for a glass cleaner when diluted 1 to 1000 parts water. When diluted with water for summer use this windshield cleaner will cost pennies per gallon. KEEP OUT OF REACH OF CHILDREN: WARNING: Harmful or fatal if swallowed. May irritate eyes. Keep away from high heat. External- Flush with water. Internal- Call Physician immediately. If splashed in eyes, flush eyes and under eyelids with plenty of cool water. Item # K001SC-GL-4 gallon bottles #K001SC-HD6-4 6 gallon head pack

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE, UTAH PHONE (801) 295-5022 OUTSIDE SALT LAKE AREA (800) 366-5022 www.lyndist.com

365

365


366

366

deep freeze plusdeep freeze plusFreezer Freezer And Locker CleanerAnd Locker Cleaner


-50°°

Cleans at sub freezingCleans at sub freezingtemperatures!temperatures!

Here is one of the newest, most effectivecleaning agents for use anywhere cleaning isto be accomplished at below freezingconditions. The formula is specificallydesigned to provide a fast, efficient andpractical means of cleaning frozen foodstorage areas where conventional cleanersfreeze solid. The ability to resist freezing to-40° F is coupled with hard working cleaningaction to penetrate, dissolve and suspend soilfor easy removal by wiping, mopping,squeegee, or wet vacuum machine pickup.Costly shutdowns can now be eliminated, asfrozen food storage areas operating at -10° Fcan now be easily cleaned of dirt, grime, fatsand grease deposits during regular operations.Cleaning properties give all the cleaningpower the job demands- with safety. Includethis product today in your regular maintenanceprogram for all sub-freezing and frozenstorage area sanitation.

Authorized for use in meat plantsAuthorized for floor and wall cleaning infederally inspected meat and poultryestablishments by the technical servicesdivision, United States Department ofAgriculture, Consumer and Marketingservice.

• Immediately starts to dissolve grimeand suspend soil.

• Resists freezing to -40°° F.• Aids in melting existing ice

formations.• Contains no glycol - biodegradable• Authorized by U.S.D.A. for use in

meat plants.• Formulated for use with

conventional or automatic floorscrubbers.

367

367

DISH-A-CLEAN CONCENTRATED HAND DISH WASHING DETERGENT This dish washing detergent is specifically designed for industrial, institutional, and restaurant use where fast grease emulsification and lasting suds are a must. Ideal for cleaning heavily encrusted pots and pans. Mountains of hard working suds penetrate grease and food deposits. All pots, pans, glassware and china are left spot-free and film-free. This product contains no soap, only the finest anionic and non-ionic surfactants. Although tough on grease and fat, this lotion dish wash is easy on the hands. This dish wash is also an excellent fine fabric detergent for washing synthetics such as rayon, silk, orlon, nylon and dacron. USES & BENEFITS: Cleans glasses, china, silverware, pots and pans. Makes an excellent all purpose cleaner with remarkable cooking grease, fats and oil emulsification properties. Dish-a-clean rinses freely and never streaks, it has rich stable suds with a fresh lemon scent. Dish-a-clean is easy on the hands and is biodegradable. This product is concentrated so a little goes a long way, this also means freight savings and smaller area for stocking purposes and ease of handling. DIRECTIONS FOR USE: To clean dishes and glasses use ½ ounce to 1 ounce per gallon of water. For heavy grease and baked on food on pots and pans use 2 ounces to 3 ounces per gallon of water. Allow to soak for a few minutes. Hot water works better than cold. LYN DISTRIBUTING 965 No. Redwood Road No. Salt Lake, UT 84054 Phone (801) 295-5022 Outside Salt Lake Area (800) 366-5022

368

368

DISH-A-CLEAN SUPER CONCENTRATE HAND DISH WASHING DETERGENT This dish washing detergent is specifically designed for industrial, institutional, and restaurant use where fast grease emulsification and lasting suds are a must. Ideal for cleaning heavily encrusted pots and pans. Mountains of hard working suds penetrate grease and food deposits. All pots, pans, glassware and china are left spot-free and film-free. This product contains no soap, only the finest anionic and non-ionic surfactants. Although tough on grease and fat, this lotion dish wash is easy on the hands. This dish wash is also an excellent fine fabric detergent for washing synthetics such as rayon, silk, orlon, nylon and dacron. USES & BENEFITS: Cleans glasses, china, silverware, pots and pans. Makes an excellent all purpose cleaner with remarkable cooking grease, fats and oil emulsification properties. Dish-a-clean rinses freely and never streaks, it has rich stable suds with a fresh lemon scent. Dish-a-clean is easy on the hands and is biodegradable. This product is extremely concentrated so a little goes a long way, this also means freight savings and smaller area for stocking purposes and ease of handling. DIRECTIONS FOR USE: To clean dishes and glasses use ¼ ounce to ½ ounce per gallon of water. For heavy grease and baked on food on pots and pans use 1 ounce to 2 ounces per gallon of water. Allow to soak for a few minutes. Hot water works better than cold. LYN DISTRIBUTING 965 No. Redwood Road No. Salt Lake, UT 84054 Phone (801) 295-5022 Outside Salt Lake Area (800) 366-5022

369

369

HEAVY DUTY DEGREASER & CLEANER CONCENTRATE WITH 12% BUTYL

This multi-purpose cleaner and degreaser contains special detergents, builders andbutyl degreasers to instantly dissolve heavy dirt, grime, oil, and grease deposits.

DIRECTIONS: Dilute in warm or hot water for the best performance. Spray, brush or mop on, andallow the cleaner to penetrate and loosen deposits, then flush away with a clean water rinse.CLEANING FLOORS ... • Vinyl, Rubber, Linoleum tile • Ceramic, Terrazzo and Concrete floorsOne part detergent concentrate with up to 50 parts water.CLEANING ... • Walls * Greasy floors • Gymnasiums * White wall tires • Rubber and Wooden mats• Floor machine pads and brushes • Swimming pools, spas, shower room • One part detergentconcentrate with up to 30 parts water. REMOVAL OF WAX. • Asphalt tile * Vinyl floors • Terrazzo* Concrete • And all other hard & resilient floors One part detergent concentrate with up to 10 partswater. CLEANING...• Lockers * Files • Cabinets * Painted surfaces • Light cleaning on decorativesurfaces One part detergent concentrate with up to 64 parts water. CLEANING. . • Fans & Ducts •Motor shells • Brick walls • Counter & Hood • Greasy parts • Skylights Refrigerator and Airconditioner coils. One part detergent concentrate with up to 12 parts water.CLEANING ...• Auto, Bus, Truck & Equipment parts • Engines, transmissions, and chassis • Ovens,Fryers, & Grills * Kitchen hoods and air filters. One part detergent concentrate with up to 7 partswater. Remove difficult or hard deposits by allowing the detergent solution to saturate forapproximately five minutes, rub gently with steel wool and rinse.

CAUTION: Harmful if swallowed. Avoid contact with eyes and mucous membranes and prolonged contactwith skin.FIRST AID: External - Flush with water.Eyes - Flush with plenty of cool water for at least 15 minutes and obtain medical attention.Internal - Drink large quantities of water followed with citrus fruit juice. Call physician immediately.KEEP OUT OF REACH OF CHILDREN

LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, Utah. 84054Phone Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

370

370

DUAL POWER WATER BASED

CLEANER / DEGREASER FOR KITCHENS & RESTAURANTS This powerful water based cleaner degreaser works where others fail. Formulated with several different ingredients including a dual surfactant system. This formula works on extreme ly tough jobs that require extra strength. Concentrated, this product may be diluted with up to 200 parts water for greatest economy. This product may be used for degreasing and contains corrosion protection. Rust preventatives form a corrosion inhibiting coating when diluted cleaner is not rinsed from metal surfaces. Dual Power contains superior grease and soil penetrating qualities that allow this degreaser / cleaner to be used in many ways.

CLEANS: KITCHENS, FACTORIES, SCHOOLS, MACHINERY, FOOD PROCESSING EQUIPMENT, GARAGE FLOORS, HEAVY EQUIPMENT, RESTAURANT FLOORS.

VERSATILE: WORKS GREAT FOR HAND OPERATIONS, AUTOMATIC SCRUBBERS OR PRESSURE WASHERS. NO HARMFUL VAPORS OR TOXIC SOLVENTS, WORKS WELL IN HOT, CO LD, HARD OR SOFT WATER. NON-FLAMMABL E, NON-CORROSIVE, BIODEGRADABLE

Dual Power concentrate is a safe alternative to h azardous cleaners of the past. This cleaner gives you something that ordinary cleaners can't offer - Dual cleaning surfactants. This cleaner leaves a pleasant, fresh scent that your customers are sure to notice and appreciate.

Light soil................ .... Medium soil............... Heavy soil.................. Painted garage floors Oil stained un -coated concrete floors.......... Kitchens floors........... Windows or mirrors... Equipment................. Kitchen counters........ Kitchen equipment.. Greasy asphalt..........

1 to 150 parts water 1 to 40 parts water 1 to 10 parts water 1 to 10 parts water 1 to 5 parts water 1 to 8 parts water 1 to 200 parts water 1 to 10 parts water 1 to 15 parts water 1 to 5 parts water 1 to 8 parts water

The above directions are flexible rather than specific. In many cases a more diluted solution can be used, while for extreme conditions a less diluted solution may be used.

DIRECTIONS FOR USE:

Item # K1014A-4 55 gallon drum #K1014-HD6-4 6 gallon head pack #k1014-4 1 gallon bottle

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE,UTAH 84054 Phone 295-5022 Outside Salt Lake Area 1-800-366-5022 www.lyndist.com

371

371


DIRECTIONS:Rotary Scrub1. Vacuum carpets thoroughly.2. Check dye stability by applying a few drops of concentrate to an inconspicuous area.3. Remove furniture from carpet area to be cleaned.4. Prepare solution of 1 part concentrate to 25 parts warm water ( 5 ounces per gallon).5. Shampoo a 5 square foot section with a nylon or other soft bristle scrub brush on a floor machine. Repeat at a 90° angle to

first application.6. Repeat until carpet is cleaned.7. Rake or brush up pile and allow carpet to dry completely.8. Vacuum thoroughly and replace furniture.

Dry Foam Machine1. See steps 1, 2, 3, for rotary scrub.2. Prepare a solution of 1 part concentrate to 12 parts water (10 ounces per gallon).3. Apply liberally to a 6 square foot section through dry foam machine in one direction, then at 90° to the first application.4. See steps 6, 7, 8, for Rotary Scrub.

Upholstery1. Vacuum surface thoroughly.2. Check for dye stability by applying a few drops of concentrate to an inconspicuous area.3. Prepare a solution of 1 part concentrate to 8 parts warm water ( 16 ounces per gallon) in a bucket.4. Agitate solution to work up a head of foam.5. Using foam only apply to surface with a soft bristly brush working the foam until dissipated.6. Dry brush surface thoroughly.7. Allow to dry and vacuum.


This concentrated dry foam shampoo is a mixture of high foaming surfactants, resin salts, optical brighteners, and deodorizersformulated to deliver quick and effective carpet cleaning. It may be used by rotary scrub or dry foam machine application. Becauseof it’s high recommended dilutions, it is very economical to use. This shampoo is safe and gentle to carpet fibers, yet strongenough to remove the most stubborn soil and grease. Unlike other shampoos, this product does not build up or dull carpet fibers. Itdoes not leave them sticky to promote resoiling.The high foaming surfactants in this product breakup and encapsulate soil. Then they dry to a friable powder which can bevacuumed up easily. They also effectively remove stains and spots safely often eliminating the need for expensive limited usespotters.The resin salts in the formulation act as soil retardants coating the carpet fibers to seal them from spots and stains that wouldotherwise penetrate and be extremely difficult if not impossible to remove. These resins also leave fibers more resisitant to soilbuildup. This makes regular vacuuming much more effective.Optical brighteners contained in this shampoo actually brighten and sharpen colors restoring the carpet to it’s original beauty.

CARPET SHAMPOO CONCENTRATE

372

372

DIRECTIONS:Rotary Scrub1. Vacuum carpets thoroughly.2. Check dye stability by applying a few drops of concentrate to an inconspicuous area.3. Remove furniture from carpet area to be cleaned.4. Prepare solution of 1 part concentrate to 50 parts warm water (2 ½ ounces per gallon).5. Shampoo a 5 square foot section with a nylon or other soft bristle scrub brush on a floor machine. Repeat at a 90° angle to

first application.6. Repeat until carpet is cleaned.7. Rake or brush up pile and allow carpet to dry completely.8. Vacuum thoroughly and replace furniture.

Dry Foam Machine1. See steps 1, 2, 3, for rotary scrub.2. Prepare a solution of 1 part concentrate to 24 parts water (5 ounces per gallon).3. Apply liberally to a 6 square foot section through dry foam machine in one direction, then at 90° to the first application.4. See steps 6, 7, 8, for Rotary Scrub.

Upholstery1. Vacuum surface thoroughly.2. Check for dye stability by applying a few drops of concentrate to an inconspicuous area.3. Prepare a solution of 1 part concentrate to 16 parts warm water ( 8 ounces per gallon) in a bucket.4. Agitate solution to work up a head of foam.5. Using foam only apply to surface with a soft bristly brush working the foam until dissipated.6. Dry brush surface thoroughly.7. Allow to dry and vacuum.


This concentrated dry foam shampoo is a mixture of high foaming surfactants, resin salts, optical brighteners, and deodorizersformulated to deliver quick and effective carpet cleaning. It may be used by rotary scrub or dry foam machine application. Becauseof it’s high recommended dilutions, it is very economical to use. This shampoo is safe and gentle to carpet fibers, yet strongenough to remove the most stubborn soil and grease. Unlike other shampoos, this product does not build up or dull carpet fibers. Itdoes not leave them sticky to promote resoiling.The high foaming surfactants in this product breakup and encapsulate soil. Then they dry to a friable powder which can bevacuumed up easily. They also effectively remove stains and spots safely often eliminating the need for expensive limited usespotters.The resin salts in the formulation act as soil retardants coating the carpet fibers to seal them from spots and stains that wouldotherwise penetrate and be extremely difficult if not impossible to remove. These resins also leave fibers more resisitant to soilbuildup. This makes regular vacuuming much more effective.Optical brighteners contained in this shampoo actually brighten and sharpen colors restoring the carpet to it’s original beauty.

CARPET SHAMPOO CONCENTRATE

373

373

FCC-80

BLOCK CLEANER & WHITENER

This concentrated cleaner & brightener is formulated with the power of chlorine for grease cutting and bleaching. Designed for use in a wide variety of applications and dilutions for economical and versatile performance. This powerful liquid concentrate is designed for use in the food industry to clean and brighten problem areas, and contains chlorine bleach for the most effective cleaning performance on heavy grease and blood stains. Adjust the dilution to meet the cleaning requirements of each application to get the job done as quickly and economically as possible. Directions: dilute this concentrate with warm or cold water. Use 1 part fcc-80 to 4 parts water for most block whitening or cleaning. Dilution ratios may be adjusted for deeper stains or lighter stains, or desired speed of whitening. Be sure to rinse with potable water after use. This product is authorized by the U.S.D.A. as a general cleaning agent on all surfaces. LYN DISTRIBUTING 965 No. Redwood Rd. No. Salt Lake City, Utah 84054 Outside Salt Lake 1-800-366-5022 Salt Lake Area 1-801-295-5022

374

374


vacuum• Contains corrosion inhibitors• Contains non-ionic surfactants

to deep clean grease & oil• Contains soil anti-redepositing

agents


This product is a truly heavy duty all-purpose concentrated detergent for use onevery surface not harmed by water. Its controlled sudsing action quickly removesdirt, grease and grime, leaving the surface film-free. Excellent for use inautomatic scrubbing machines. It is non-corrosive and non-flammable. Thisdetergent is a synergistic blend of anionic and non-ionic surfactants along withspecial sequesterants and emulsifiers. The high quality of strong detergentbuilders in this product keep soil suspended for easy pickup by machine vacuumsor when used with a wet mop. Its superior soil penetration and retention allows itto be used at very low cost per gallon use dilutions. This product may be usedwith hard or soft water.



Formula 300375

375


vacuum• Contains corrosion inhibitors• Contains non-ionic surfactants

for deep cleaning surfaces• Contains soil anti-redepositing

agents


This product is a truly heavy duty all-purpose concentrated detergent for use onevery surface not harmed by water. Its controlled sudsing action quickly removesdirt, grease and grime, leaving the surface film-free. Excellent for use inautomatic scrubbing machines. It is non-corrosive and non-flammable. Thisdetergent is a synergistic blend of anionic and non-ionic surfactants along withspecial sequesterants and emulsifiers. The high quality of strong detergentbuilders in this product keep soil suspended for easy pickup by machine vacuumsor when used with a wet mop. Its superior soil penetration and retention allows itto be used at very low cost per gallon use dilutions. This product may be usedwith hard or soft water. This is a extremely concentrated product that savesfreight and storage space.



Formula 500376

376


NO RINSE FLOORFINISH EMULSIFIER

THE FASTEST STRIPPER TO HITTHE FLOORStrip your floors the new, easy way.Mop it on. Let the chemical do thehard work. No scrubbing. No back-breaking labor. In just minutes,vacuum off your old floor finish. It’sthat simple.

377

377

A new, advanced formula that simplifies floor stripping. Just mop it on. In minutes, it liquefiesyour old floor finish. Use a wet vacuum to remove the old film. No need for floor scrubbers orexpensive stripping pads.

This concentrated, water-based stripper is specially formulated for water emulsion floorfinishes and waxes. It actually re-emulsifies metal cross-linked and other polymers withoutmechanical agitation. It’s perfect for resilient tile, linoleum, terrazzo, quarry tile and concrete.EffectiveStrips the toughest, discolored, built-up floor finishes without expensive equipment.Effectively dissolves unsightly buildup in hard to reach areas and corners. Seldom a need forheavy-duty cove and baseboard strippers. No-foam formulation works quickly and is easilyremovable.

EconomicalAdvanced concentrated formulas for ultimate effectiveness and economy. Simplified methodminimizes labor costs. Eliminates costly use of pads and brushes in normal strippingoperations. Reduces equipment usage and application time. Cuts floor stripping timesubstantially.

Simple to UseThe most simplified method of floor stripping available. Unique two-step process. Eliminatesthe usual labor and time-consuming steps of stripping old, hard-to-remove finish buildup. Nosplashing on walls.

Quick DissolvingRe-emulsification is quick. Old finishes begin to liquefy immediately. Removal isaccomplished in five minutes for most jobs.

Maximizes Finish CoverageGet up to 30% more coverage from floor finishes after using our stripper. Floor porosityremains unaffected because of no machine scrubbing. Creates no blotchy appearance.

Contains No AmmoniaNo irritating ammonia fumes or annoying odor. No need to restrict floor stripping; usable in allareas including hospitals and nursing homes.

Where to UseHospitals •• Airports •• Train Stations •• Laboratories •• Supermarkets •• Restaurants•• Banks •• Office Buildings •• Shopping Malls •• Schools •• Lunchrooms ••Department Stores •• Restrooms •• Kitchens •• Fast Food Chains •• Nursing Homes ••Bus Depots •• Nurseries •• Apartment Buildings

DirectionsThis stripper is concentrated to maximize its effectiveness. The type of finish, number of coats,age of finish and frequency of spray buffing will determine the most effective dilution ratios.Each job will require a different solution strength. A good starting point is one part product to2 parts water. Do not use concentrate full strength; always dilute with water. Before strippingasphalt tile, test solution on small area for color fastness. Apply the solution liberally with astring mop. Wait at least five minutes. Keep the floor wet; do not allow to dry. Use wetvacuum or auto scrubber equipped with squeegee to remove solution. Rinse the floor twicewith warm water. Allow to dry and apply finish. If desired, for large areas, use this productwith rotary or automatic scrubber to remove extremely heavy finish buildup. Increase thedilution to 1:5 or 1:6.

378

378

GREEN CLEAN NEW BIODEGRADABLE

CLEANER AND DEGREASER Green clean is biodegradable, non-toxic and non-abrasive. This revolutionary product cleans grease, grime and dirt from tools, concrete floors, upholstery, vinyl, carpeting, equipment, engines and power trains. This product may be used in parts washers, through pressure washer and low pressure sprayers, and floor scrubbing equipment. Green clean eliminates the need for many other specialized and often hazardous products. This product out performs many specialized products. Green clean should always be diluted from it’s concentrated form. This product is very economical when used as directed by a LYN DISTRIBUTING representative. Green Clean is free rinsing and may be used with all water temperatures. Green Clean is great for cleaning printing equipment, and inks and grime from presses. Green Clean maybe used for window cleaning when diluted 1 part to 150 parts water. When using on fabric be sure to test fabric first for color fastness. Green Clean maybe diluted 1 part cleaner concentrate to 25 parts water for cleaning dirt, grease, and grime from shop floors. Green Clean does a great job that you will see by trying this product, this product comes with a guarantee of satisfaction, or product may be return at no cost to the user.

LYN DISTRIBUTING 965 No. Redwood Road No Salt Lake, UT 84054 Phone (801) 295-5022 Out Side Salt Lake Area (800)366-5022

379

379

HIGH FOAMING Non Butyl Cleaner

HFC-87 Foam Cleaner makes cleaning easy. This product is designed to be used through a foam nozzle attached to a pressure washer to quickly remove dirt, oil, grease, road film, and exhaust from aluminum or painted surfaces without attacking the surface. A special ionic detergent system quickly floats away road film and grease without use of brushes or other manual devices. This product may be used manually, however, if no pressure washer is available.

Special sequesterants keep equipment free of water mineral scale. This product rinses freely, leaving no film or residue when used as directed. May be used to clean any surface soiled with dirt, oil, traffic film, etc. Brightens aluminum surfaces without the use of acid. Use on: Cars •• Trucks •• Buses •• Airplanes ••Tank Trucks ••Aluminum Siding Garbage Trucks & Cans, Dumpsters, Food Equipment, Floors. Use as a one step cleaning operation, that leaves no film or residue and is safe on all surfaces. This product is highly concentrated, dilute one part concentrate to 25 parts water for pressure cleaning of heavy soil or traffic film. May be diluted with up to 100 parts water for light soil. Please note: While this product is safe to use on aluminum and painted surfaces when diluted according to the directions, it may remove wax from surface.

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD, NORTH SALT LAKE, UTAH 84054 PHONE 801-295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022 www.lyndist.com

380

380


High Pressure Touchless is an optimized cleaner that uses newly developed technology that

releases the polar bond of molecules from the surface they are attached or adhered. Dirt, grease,

and grime rinse off metal or painted surfaces without the need of a high pH. This control pH cleaner will do an amazing job of cleaning buses, trucks, cars, and airplanes without the user having

problems with environmental concerns. The surfactants in this product are completely biodegradable

and free rinsing. This product is designed for use in drive through touchless wash systems. High

Pressure Touchless may be diluted 50 to 100 parts water to 1 part cleaner. The special charged

molecules of this detergent system quickly float away road film without the use of brushes or other

manual devices. The pH of this product is 9 -10 when diluted with water.

For Industrial Use Only •• Keep Out Of Reach of Children.

Directions for Use: Spray on surfaces after product is diluted, then high pressure rinse.

Lyn Distributing 965 North Redwood Road, North Salt Lake, Utah 84054 Phone In Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

• Controlled pH • One Step Operation for Cleaning • Highly Concentrated • Use on All Surfaces • Free Rinsing with No Film or Residue • Environmentally Friendly (No VOC’s) • Works with High or Low Pressure

381

381

HIGH PRESSURESTEAM CLEANING DETERGENTHEAVY DUTY LIQUID CLEANER

LOW FOAMING, SCALE PREVENTATIVE FORMULACONTAINS RINSE AIDS AND WATER CHELATING

AGENTS FOR A CLEAR RINSE.

DIRECTIONS FOR USE

This is a heavy duty, fast acting, concentrated liquid steam cleaner. Specifically formulated forremoval of grease, oils; and imbedded soils on metal, wood, concrete, ceramic tile and mostpainted surfaces. This product works well in steam cleaners, high pressure washers, and otherhigh-pressure spray systems (enclosed jet washer systems).H.L.C. contains special inhibitors to protect against corrosion, scale and damage to heatingcoils.DILUTION RATIOS:Light duty cleaning................1 part H.L.C.———128 parts water.Medium duty cleaning...........1 part H.L.C.———64 parts water.Heavy duty cleaning..............1 part H.L.C.———32 parts water.For automatic proportioning equipment adjust tell the cleaning effectiveness is satisfactory.Rinse the detergent cleaner with clean water after use. Always check to be sure that thisproduct does not effect surface to be cleaned at the dilution you choose. H.L.C.providesconvenient effective cleaning in and easy to use liquid form.

CAUTION: Contains sodium hydroxide. Avoid contact with eyes, skin, mucous membranes.KEEP OUT OF REACH OF CHILDREN

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD NORTH SALT LAKE, UTAH 84054 www.lyndist.comPHONE SALT LAKE AREA 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

382

382


DIRECTIONS: FIND THE DESIRED APPLICATION IN THE CHART AT BOTTOM, AND DILUTE AS DESCRIBED. USE RECOMMENDED PROCEDURE FOR DESIRED APPLICATION. APPLY WITH A SPRAY BOTTLE. DOES NOT REQUIRE HEAT OR SOLVENTS, AND LEAVES NO ODOR OR FUMES. USE CAUTION WHEN USING ON ALUMINUM OR MAGNESIUM. REMOVES WAX, GUM, DYE, LIGHT CARBON, GREASE AND OIL. AIRDUCTS 1/50 ASPHALT FLOORS 1/50 WASH BASINS 1/20 FLOORS 1/10 GEN. MAINT. 1/5 PIPES 1/50 PLASTIC 1/30 RUBBER. 1/40 WAX REMOVAL 1/5 CONVEYORS 1/10 ENGINES 1/5 RANGES/OVENS 1/5 MACHINERY 1/5 LIGHTFIXTURES 1/40 PRESSES 1/40 SMALL PARTS 1/10 LOCKERS 1/50 TOOLS 1/5 TILE FLOORS 1/10 DIESEL UNITS 1/5 EXHAUST FANS 1/10 EQUIPMENT 1/50 WHITE WALLS 1/5 IF UNSURE OF SURFACE COMPATIBILITY, TEST IN AN INCONSPICUOUS AREA BEFORE USING. CAUTION: CORROSIVE, CONTAINS POTASSIUM HYDROXIDE. AVOID CONTACT WITH EYES, DKIN, AND CLOTHING. DO NOT TAKE INTERNALLY. ANTIDOTES: EYES: FLUSH WITH CLEAR WATER THOROUGHLY, THEN BATHE EYES WITH BORIC ACID SOLUTION. GET PROMPT MEDICAL ATTENTION. EXTERNAL: FLUSH WITH CLEAR WATER THOROUGHLY, THEN RINSE WITH VINEGAR. INTERNAL: DRINK AS MUCH LEMON OR ORANGE JUICE AS POSSIBLE, THEN FOLLOW WITH VEGETABLE OIL. GET PROMPT MEDICAL ATTENTION. KEEP OUT OF REACH OF CHILDREN. Please Note: The use of this material being subject to conditions beyond the seller’s control, seller makes no warranty of any kind expressed or implied as to the material or its use. The user must assume all liability when using this product. MANUFACTURED BY:

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE, UTAH 84054 PHONE (801) 295-5022 OUTSIDE SALT LAKE 1-(800)-366-5022 www.lyndist.com

HOT STUFF HEAVY DUTY DEGREASER SAFE NON-COMBUSTIBLE EMULSIFIABLE CLEANER HOT STUFF IS AN EXCELLENT CLEANER FOR THE REMOVAL OF PETROLEUM TYPE RESIDUES PERFECT FOR PRESSURE WASHER USE

383

383

KG-24 liquid car wash concentrate is biodegradable, non-polluting, safe on brushesand all automotive finishes. KG-24 is safe for use on all types of paints. KG-24 rinsesfreely to never leave a soap film on the surface of the automobile. KG-24 ismanufactured with special rinse additives so as to rinse freely even in the hardest ofwater. KG-24 contains no caustic or alkali, it will not dull paint even when someoneuses a little to much to clean a automobile. KG-24 is a neutral detergent that works bypenetrating into dirt with wetting agents and surfactants that break down the surfacetension of soil and lift it to be rinsed away. KG-24 does not remove wax onautomotive finishes. KG-24 is user friendly, when you use KG-24 it will not attackyour hands because it is neutral. KG-24 is very cost effective, a little goes a long way,1-oz. to 4 gallons of water usually does the trick for hand washing. When using KG-24through an automatic spray system KG-24 will dilute 1-oz. to 5 gallon of water.

AREAS OF USE: CARS, TRUCKS, FIRE TRUCKS, SCHOOL BUSES, CITY VEHICLES, COUNTY

VEHICLES, AIRPLANES, MOBILE HOMES, RECREATIONAL VEHICLES, UTILITIYCOMPANY VEHICLES.

PROPERTIES:KG-24 has a pleasant lemon - lime fragrance and is green in color. KG-24 has

excellent foam stability and is very hard water tolerant.

LYN DISTRIBUTING 965 No. Redwood Road, North Salt Lake, Utah 84054Phone 295-5022 Outside Salt Lake City Area 1-800-366-5022

384

384

KG-24 with wax liquid car wash concentrate is biodegradable, non-polluting, safe onbrushes and all automotive finishes. KG-24 with wax is safe for use on all types ofpaints. KG-24 with wax rinses freely to never leave a soap film on the surface of theautomobile. KG-24 with wax is manufactured with special rinse additives so as torinse freely even in the hardest of water. KG-24 with wax contains no caustic or alkali,it will not dull paint even when someone uses a little to much to clean a automobile.KG-24 with wax is a neutral detergent that works by penetrating into dirt with wettingagents and surfactants that break down the surface tension of soil and lift it to be rinsedaway. KG-24 does not remove wax on automotive finishes. KG-24 with wax is userfriendly, when you use KG-24 with wax it will not attack your hands because it isneutral. KG-24 with wax is very cost effective, a little goes a long way, 1-oz. to 4gallons of water usually does the trick for hand washing. When using KG-24 with waxthrough an automatic spray system KG-24 with wax will dilute 1-oz. to 5 gallon ofwater. This product contains a special wax to leave the surface protected after use.

AREAS OF USE: CARS, TRUCKS, FIRE TRUCKS, SCHOOL BUSES, CITY VEHICLES, COUNTY

VEHICLES, AIRPLANES, MOBILE HOMES, RECREATIONAL VEHICLES, UTILITIYCOMPANY VEHICLES.

PROPERTIES:KG-24 with wax has a pleasant lemon - lime fragrance and is green in color. KG-24

with wax has excellent foam stability and is very hard water tolerant. The foam from thisproduct breaks down quickly after use, so the rinse is very effect and leaves no water spots.

LYN DISTRIBUTING 965 No. Redwood Road, North Salt Lake, Utah 84054Phone 295-5022 Outside Salt Lake City Area 1-800-366-5022

385

385

This highly concentrated, low/medium-foam cleaner/degreaser instantly dissolves and emulsifies heavy dirt, grease, oils, detergent film and many other surface stains. Penetrates deeply into concrete surfaces. Formula contains low-foaming emulsifiers and is biodegradable, phosphate free, rust-inhibitive, nonpolluting and nonflammable. Specially formulated (Low Foaming L D X ) for use in parts washers, automatic jet spray washers, or automatic or conventional scrubbers. Mop or spray application rinses freely with water.

The Time & Labor Saver For Heavy Duty & General Maintenance Cleaning

Description: A special blend of water based chemical solvents for tough, heavy duty cleaning • Instantly dissolves & emulsifies grease, oils & other heavy soil deposits. • Rust-inhibiting formula. • Designed for use in parts washers, enclosed jet spray washers, conventional & automatic

scrubbers. • Nonpolluting & Nonflammable • Phosphate free & biodegradable • Also removes waves & old soap film. • Excellent for degreasing machinery, parts, floors, automotive engines, and parking areas. LYN DISTRIBUTING 965 No. Redwood Road, North Salt Lake, Utah 84054 Phone in Salt Lake Area (801)295-5022 Outside Salt Lake Area 1-800-366-5022

CLEANER /

HEAVY DUTY DEGREASER

Quickly Cuts Into Grease & Tough

Soil Deposits

386

386

Quat based formula with excellent lemon fragrance to clean restroom sinks, floors,toilets, and walls. Non-acid, safe on most hard surfaces and will not dull detergent resistantfloor finishes. This mild cleaner will deodorize areas where the product is used. This cleanerleaves a fresh lemon fragrance when used. This product may be used to spray in the air, tofreshen the air. When used in areas of heavy grime, a heavy-duty cleaner may be needed topre-clean the surface before using this product.

This product may be dilute from 1 part cleaner concentrate to 1-20 parts water. The Quat's inthis product will counteract with odors to neutralize odors at their source.

CAUTION: Harmful or fatal if swallowed. Keep container well sealed when not in use toavoid contamination. If ingested, do not induce vomiting, contact physician immediately.Drink milk, egg whites, or gelatin solution or if these are not available, drink large quantitiesof water. Triple rinse empty container with water and dispose of properly.

LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, Utah 84054Phone 295-5022 Outside Salt Lake Area 1-800-366-5022

FOR INDUSTRIAL USE ONLY

387

387

SUPER CONCENTRATE AUTO WASH & FOAMING BRUSH SOAP

MAX is a complex formula consisting of detergents, wetting agents, water softeners, and rinse additives to effectively clean automotive vehicles. MAX removes heavily accumulated grime and road film, rinses thoroughly, and will not harm automotive finishes. MAX has a controlled pH to insure that there are no environmental concerns with the product that goes down drains. DIRECTIONS: FOAMING BRUSH--MAX FOAMER/CLEANER should be diluted with water 1 part MAX to 400 parts water for foaming brush systems. This dilution should give rich dense foam when injected with air for foaming brushes. This dilution will clean bugs and road film off automotive surfaces, it will produce a pleasant fragrance while being used. MAX should be rinse with clean clear cold water after being used. MAX is safe on all automotive finishes. MAX contains no free alkali and is biodegradable and free rinsing. AUTOMATIC CAR WASHES--MAX should be diluted with water 1 part MAX to 2000 parts water. MAX is designed for use with pressure wash systems. MAX is effective and economical to use. MAX cleans cars, trucks, and buses rapidly and effectively. MAX will not gum up or corrode application equipment. MAX may be diluted up to 1 part MAX to 4000 parts water for light soils. Always adjust the dilution of MAX to the amount needed to do the job you desire, both economically and effectively.

PROPERTIES Color.............……………………….......Green Odor.................…….………………….....Lime Foam Stability.………………….......Excellent Rinsability........………………...….Very Good Soap Content........………………….......None pH....................…………………....………….8 Density...................………………………..8.5 Hard Water Tolerant......…………..……..Yes

SAFETY Keep away from children!! For industrial and institutional use only!! Do not take internally!! Controlled pH for the environment

LYN DISTRIBUTING 965 No. Redwood Rd. No. Salt Lake, Ut. 84054Phone 295-5022 Outside Salt Lake Area 800-366-5022 SERVICE REPS ALL AROUND THE U.S.A. BOISE, CHICAGO, DENVER, DALLAS,

HOUSTON, LOS ANGLES, SACRAMENTO, SALT LAKE CITY, TAMPA, PORTLAND.

388

388

Mining Degreaser & CleanerV.O.C. FREE

NEW BIODEGRADABLECLEANER AND DEGREASER

Mining Degreaser V.O.C. free is biodegradable, non-toxic, contains no butyl and noabrasives. This revolutionary product cleans grease, grime and dirt from tools,concrete floors, upholstery, vinyl, carpeting, equipment, engines and power trains.This product may be used in parts washers, through pressure washer and low-pressure sprayers, and floor scrubbing equipment. Mining Degreaser V.O.C. freeeliminates the need for many other specialized and often hazardous products. Thisproduct out performs many specialized products. Mining Degreaser V.O.C. free shouldalways be diluted from its concentrated form. This product is very economical whenused as directed by a LYN DISTRIBUTING representative. Mining Degreaser V.O.C.free is free rinsing and may be used with all water temperatures. Mining DegreaserV.O.C. free is great for cleaning printing equipment, and inks and grime from presses.Mining Degreaser V.O.C. free maybe used for window cleaning when diluted 1 part to150 parts water. When using on fabric be sure to test fabric first for color fastness.Mining Degreaser V.O.C. free maybe diluted 1 part cleaner concentrate to 25 partswater for cleaning dirt, grease, and grime from shop floors. Mining Degreaser V.O.C.free does a great job that you will see by trying this product, this product comes with aguarantee of satisfaction, or product may be return at no cost to the user. This productcontains no phosphates and has a controlled pH of less than 13. This product has anindependent laboratory certification.

LYN DISTRIBUTING 965 North Redwood Road North Salt Lake, Utah 84054Phone (801) 295-5022 Out Side Salt Lake Area (800)366-5022

389

389

Mining Degreaser & CleanerNEW BIODEGRADABLE

CLEANER AND DEGREASERMining DegreaserMining Degreaser is biodegradable, non-toxic and non-abrasive. This revolutionaryproduct cleans grease, grime and dirt from tools, concrete floors, upholstery, vinyl,carpeting, equipment, engines and power trains. This product may be used in partswashers, through pressure washer and low-pressure sprayers, and floor scrubbingequipment. Mining DegreaserMining Degreaser eliminates the need for many other specialized andoften hazardous products. This product out performs many specialized products.Mining Degreaser Mining Degreaser should always be diluted from its concentrated form. This product isvery economical when used as directed by a LYN DISTRIBUTING representative.Mining Degreaser Mining Degreaser is free rinsing and may be used with all water temperatures. MiningMiningDegreaserDegreaser is great for cleaning printing equipment, and inks and grime from presses.Mining DegreaserMining Degreaser maybe used for window cleaning when diluted 1 part to 150 partswater. When using on fabric be sure to test fabric first for color fastness. MiningMiningDegreaserDegreaser maybe diluted 1 part cleaner concentrate to 25 parts water for cleaning dirt,grease, and grime from shop floors. Mining DegreaserMining Degreaser does a great job that you willsee by trying this product, this product comes with a guarantee of satisfaction, orproduct may be return at no cost to the user. This product contains no phosphatesand has a controlled pH of less than 13. This product has an independent laboratorycertification.


390

390

N.C.-183

• Neutral pH Cleaner • Medium Suds • Leaves Protective Film • Non-Flammable • Concentrated • Biodegradable • Pleasant Lime Scent


Industries, schools, restaurants, hospitals, nursing homes, apartments, churches, office buildings and any facility that requires a biodegradable cleaner.

All purpose cold water detergent, 100% biodegradable surfactants with synergized phosphates and wetting agents added. Gives medium suds, and has thin viscosity. This detergent contains a wide range of chemicals for maximum efficiency in attacking all types of dirt and grime on any type of floor. Upon drying, it leaves a protective film for added beauty and slip resistant luster. In addition to use on floors, this detergent is also useful in cleaning walls, counters, woodwork, blinds, porcelain, or any painted or commercially enameled wood or metal surface without harm to hands. The detergent is equally efficient in cold or hot water, and excellent for hard-water areas. In extremely hard water areas, check with your distributor. Dilutes from 1 : 16 to 1 : 64 with water depending on application.

For light cleaning, use 2 to 4 ounces detergent per gallon of water. Mop or sponge the area to be cleaned. Pick up excess fluid, let the area dry, and buff for added luster. For heavy cleaning, use 4 to 8 ounces detergent per gallon of water. Allow the solution to remain on the floor for 5 to 10 minutes, then remove from the floor. For exceptionally dirty floors, use a scrubbing machine or stiff brush. Rinse the surface to remove cleaner.

Description

Areas of Use

Directions

391

391

CITRUS WATER BASED

CLEANER / DEGREASER This powerful water based cleaner degreaser works where others fail. Formulated with several different ingredients including nature's own natural citrus solvent. This formula works on extremely tough jobs that require extra strength. Concentrated, this product may be diluted with up to 200 parts water for greatest economy. This product may be used for dip tank degreasing and corrosion protection. Rust preventatives form a corrosion inhibiting coating when diluted cleaner is not rinsed from metal surfaces. Orange deodorant cleaner contains superior grease and soil penetrating qualities that allow this degreaser / cleaner to be used in many ways.

CLEANS: KITCHENS, FACTORIES, SCHOOLS, MACHINERY, FOOD PROCESSING EQUIPMENT, GARAGE FLOORS, HEAVY EQUIPMENT, RESTAURANT FLOORS. VERSATILE: WORKS GREAT FOR HAND OPERATIONS, AUTOMATIC SCRUBBERS OR PRESSURE WASHERS. NO HARMFUL VAPORS OR TOXIC SOLVENTS, WORKS WELL IN HOT, COLD, HARD OR SOFT WATER. NON-FLAMMABLE, NON-CORROSIVE, BIODEGRADABLE

ORANGE DEODORANT CLEANER concentrate is a safe alternative to hazardous cleaners of the past. This cleaner gives you something that ordinary cleaners can't offer- "DEODORIZING ACTION". The citrus extracts in this cleaner leave a pleasant, fresh scent that your customers are sure to notice and appreciate.

Light soil.................... Medium soil............... Heavy soil.................. Painted garage floors Oil stained uncoated concrete floors.......... Kitchens floors........... Windows or mirrors... Equipment................. Swimming pools........ White side wall tires.. Greasy asphalt..........



DIRECTIONS FOR USE:

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE,UTAH 84054 Phone (801)295-5022 Outside Salt Lake Area 1-800-366-5022

392

392

PINE OIL & WATER BASED CLEANER / DEGREASER

This powerful water based cleaner degreaser works where others fail. Formulated with several different ingredients including nature's own natural pine oil. This formula works on extremely tough jobs that require extra strength. Concentrated, this product may be diluted with up to 200 parts water for greatest economy. This product may be used for dip tank degreasing and corrosion protection. Rust preventatives form a corrosion inhibiting coating when diluted cleaner is not rinsed from metal surfaces. Pine oil cleaner contains superior grease and soil penetrating qualities that allow this degreaser / cleaner to be used in many ways.

DIRECTIONS FOR USE:

PINE OIL CLEANER concentrate is a safe alternative to hazardous cleaners of the past. This cleaner gives you something that ordinary cleaners can't offer- "DEODORIZING ACTION". The pine oil in this cleaner leaves a pleasant, fresh scent that your customers are sure to notice and appreciate.

Light soil.................... Medium soil............... Heavy soil.................. Painted garage floors Oil stained uncoated concrete floors.......... Kitchens floors........... Windows or mirrors... Equipment................. Swimming pools........ White side wall tires.. Greasy asphalt..........


CLEANS: KITCHENS, FACTORIES, SCHOOLS, MACHINERY, FOOD PROCESSING EQUIPMENT, GARAGE FLOORS, HEAVY EQUIPMENT, RESTAURANT FLOORS.

VERSATILE: WORKS GREAT FOR HAND OPERATIONS, AUTOMATIC SCRUBBERS OR PRESSURE WASHERS. NO HARMFUL VAPORS OR TOXIC SOLVENTS, WORKS WELL IN HOT, COLD, HARD OR SOFT WATER. NON-FLAMMABLE, NON-CORROSIVE, BIODEGRADABLE


LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE,UTAH 84054 Phone 295-5022 www.lyndist.com Outside Salt Lake Area 1-800-366-5022

393

393

CONCENTRATED FoamingUniversal Cleaner & Degreaser

U.S.D.A. RATED A-4FOR FLOOR AND WALL

CLEANINGThis degreasing cleaner produces a rich foam which quickly penetrates and floats away grease,

oil, dirt, bacteria, scum, fats, proteins, food residues, tallow, process wastes and blood from all verticaland horizontal surfaces. This cleaner emulsifies animal fats and oils quickly and economically. It canbe used on all floors and walls, in the following areas. Slaughter Houses • Meat Packing Plants •Bakeries and Butcher Shops • Kitchens • Rendering Plants • Food Processing Plants • All Tile andGrout Areas • Super Markets • Food Transport Vehicles • Fish, Poultry & Egg Processing • Dairies •Restaurants • Canneries • Showers • Perfect for use in all meat and food processing areas and industrialand institutional shower stalls • Free rinsing, non-flammable, non-corrosive •Emulsifies grease, oil, andsoil • Breaks down fats, protein and waste. • Penetrates any build up • Removes bacteria and blood.

PROPERTIES: Color……..clear • Odor……..None • pH………..13.4 • FlashPoint……….None • Fumes……….None • Rinsability………..…Complete • Fat & OilEmulsification……..Excellent •

DIRECTIONS FOR USE: First scrape heavy accumulations. Food must be removed orcovered. Manual application: Use mop, brush or sponge. Dilute one part Power Foam withtwenty parts hot water. Apply and let stand five minutes. Agitate with brush if needed for bestresults. Rinse well. Spray application: Use full strength in sprayer reservoir. Proportioningdevice should be set from 1 to 5 for heavy soiled areas; up to 1 to 30 for lighter soil. Apply andlet stand five minutes. Agitate with brush if needed. Rinse well afterwards. Shower stallcleaning: Dilute, apply and rinse as above. For best results, follow with a mild acid cleaner(C.L.A.S.S. ) for maximum removal of water minerals and soap scum. For maximumdeodorizing action and control of bacteria and mildew, apply a disinfectant as a third and finalstep. Packaged in 6 each 1 gallon bottles, 6 gallon pail, 30 gallon drum, 55 gallon drum, or 330gallon disposable tote.

LYN DISTRIBUTING 965 No. Redwood Road, North Salt Lake, Utah 84054Phone in Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

394

394

Vehicle CleanerPressure Washer Cleaner

Power Wash Plus makes vehicle cleaning easy. This product is designed tobe used through a pressure washer to quickly remove dirt, oil, grease, road film,and exhaust from aluminum or painted surfaces without attacking the surface. Aspecial ionic detergent system quickly floats away road film and grease withoutuse of brushes or other manual devices. This product may be used manually,however, if no pressure washer is available.

Special sequesterants keep equipment free of water mineral scale. Thisproduct rinses freely, leaving no film or residue when used as directed. May beused to clean any surface soiled with dirt, oil, traffic film, etc. Brightensaluminum surfaces without the use of acid.

Use on: Cars •• Trucks •• Buses •• Airplanes ••Tank Trucks ••Aluminum Siding

Use as a one step cleaning operation, that leaves no film or residue and is safe on all surfaces.This product is highly concentrated, dilute one part concentrate to 25 parts water for pressurecleaning of heavy soil or traffic film. May be diluted with up to 100 parts water forlight soil. Please note: While this product is safe to use on aluminum and paintedsurfaces when diluted according to the directions, it may remove wax fromsurface.

LYN LYN DISTRIBUTINGDISTRIBUTING 965 NORTH REDWOOD ROAD, NORTH SALT LAKE, UTAH 84054

PHONE 801-295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

395

395

DESCRIPTION: Shiny No Rinse Cleaner is an economical medium-duty cleaner. This controlled suds cleaner is ideal for use with a mop and pail with wringer, or scrubber with squeegee pickup applications. This general purpose cleaner is effective against a variety of soils, and safe on all washable hard surfaces. Shiny No Rinse Cleaner is non-phosphate, has a neutral pH, is biodegradable, and requires no rinse and is authorized by USDA for use in federally inspected meat and poultry plants. This cleaner has been specifically formulated for walk behind or ride-on scrubbers for large areas of warehouses with concrete floors (coated or uncoated) or tile floors. These machines cannot rinse floors and need soaps with a special charged surfactant system that will not leave a haze behind. This product is a great large warehouse floor cleaner or large mall floor cleaner. This product will not hurt waxed floors. FEATURES: • Controlled suds • Non phosphate • Biodegradable • Highly concentrated

• No alkali • Nonflammable • Non-rinsing • Pleasant fragrance

NOTE: Not harmed by freezing. If frozen, allow thawing at room temperature and mix. CAUTIONS: Avoid eye contact if splashed in eyes, flush with water for 10 minutes. If irritation persists, consult a physician. Use rubber gloves and eye protection for hand application. RECOMMENDED STARTING DILUTIONS: Manual Cleaning Light soil 1 to 64 (2ozs./gal.) Moderate soil 1 to 32 (4 ozs. /gal.) Heavy soil 1 to 20 (6 ozs. /gal.)

Machine Cleaning Moderate soil 1 to 128 (1 ozs. /gal.) Heavy soil 1 to 45 (3 ozs. /gal.)

TECHNICAL DATA: Appearance: Red Liquid pH: (7.0-7.5) Odor: Sweet Orange Stability: Heat stable Available in 275 gallon tote, 55 gallon drum, 30 gallon drum, 6 gallon container, 6 X 1 gallon bottles / case MSDS Available

LYN DISTRIBUTING 965 No. Redwood Road North Salt Lake, UT 84054

Phone (801) 295-5022 Web site www.lyndist.com Outside Salt Lake Area 1(800) 366-5022

No Rinse cleaner Biodegradable

Neutral pH

396

396


STEAM EXTRACTOR SHAMPOO

• Low Foam • Soil Retardant • Cleans & Brightens


For use in hotels, motels, restaurants, offices, schools, movie theaters and anywhere carpet needs cleaned.

This product is a concentrated carpet cleaner formulated for use in hot water extractors. Combines cleaners, brighteners, low foaming agents and soil retardants to effectively clean all colorfast fibers, acrylic, nylon, polyester, rayon and wool rugs and carpets. Removes grease, grime, mud, blood and other stains. For use in hotels, motels, restaurants, offices schools and movie theaters. Quickly dries, leaving carpets looking clean and new. Leaves no tacky residue.

Vacuum area to be cleaned to remove loose dirt, lint and other material. Pre-treat spots and stains with spotting solution. Mix at 2 oz. per gallon for light soil, 4 oz. per gallon for medium soil, and 6 oz per gallon for heavy soil. Mix in hot water tank of extractor unit. Operate extractor unit according to manufacturers instructions. Allow carpet to dry completely before traffic.

CAUTION: Keep out of reach of children. Contains 2-butoxyethanol. Use only in a well ventilated area. Avoid breathing vapor. Avoid prolonged or repeated contact with skin and eyes. If in eyes, flush thoroughly with water and consult physician. If on skin, wash thoroughly with soap and water. If swallowed, give 1 or 2 glasses of water and call a physician.

Description

Areas of Use

Directions

397

397

SUB 0SUB 0-3030°°Freezer Freezer And Locker CleanerAnd Locker Cleaner


-50°°

Cleans at sub freezingtemperatures!

Here is one of the newest, most effectivecleaning agents for use anywhere cleaning isto be accomplished at below freezingconditions. The formula is specificallydesigned to provide a fast, efficient andpractical means of cleaning frozen foodstorage areas where conventional cleanersfreeze solid. The ability to resist freezing to -30° F is coupled with hard working cleaningaction to penetrate, dissolve and suspend soilfor easy removal by wiping, mopping,squeegee, or wet vacuum machine pickup.Costly shutdowns can now be eliminated, asfrozen food storage areas operating at -10° Fcan now be easily cleaned of dirt, grime, fatsand grease deposits during regular operations.Cleaning properties give all the cleaningpower the job demands- with safety. Includethis product today in your regular maintenanceprogram for all sub-freezing and frozenstorage area sanitation.




formations.• Authorized by U.S.D.A. for use in



398

398

SUB 0SUB 0-5050°°Freezer Freezer And Locker CleanerAnd Locker Cleaner


-50°°

Cleans at sub freezingtemperatures!

Here is one of the newest, most effectivecleaning agents for use anywhere cleaning isto be accomplished at below freezingconditions. The formula is specificallydesigned to provide a fast, efficient andpractical means of cleaning frozen foodstorage areas where conventional cleanersfreeze solid. The ability to resist freezing to -50° F is coupled with hard working cleaningaction to penetrate, dissolve and suspend soilfor easy removal by wiping, mopping,squeegee, or wet vacuum machine pickup.Costly shutdowns can now be eliminated, asfrozen food storage areas operating at -10° Fcan now be easily cleaned of dirt, grime, fatsand grease deposits during regular operations.Cleaning properties give all the cleaningpower the job demands- with safety. Includethis product today in your regular maintenanceprogram for all sub-freezing and frozenstorage area sanitation.




formations.• Contains no glycol – Biodegradable.• Authorized by U.S.D.A. for use in



399

399

SUPER CONCENTRATED AUTO DETERGENT SUPER CONCENTRATE WAS DEVELOPED TO REDUCE STORAGE SPACE AND REDUCE FREIGHT COSTS. Super concentrate may be diluted into a 55 gallon drum and then diluted again at 400 - 500 to 1 part concentrate from the 55 gallon drum. This product may be use for auto prespray, foaming brush application and also regular auto wash applications. Super concentrate is pH balanced so it will not harm any auto finish. Super concentrate has a special

dispersing agent so that it mixes easily with hard or soft water. This concentrate is a unbelievable cleaner and is free rinsing.

6 GALLONS MAKES 55 GALLONS SUPER CONCENTRATE was formulated with special surfactants that are mild to human skin yet cut through grease and dirt very effectively. This product contains water chelating agents to rinse freely after being used. Keep dirt, salt and other weathering agents off your auto finish to keep it looking new for years.

PRODUCT BENEFITS: Mixes easily with cold or hot water. Stores in a small area. High sudsing after dilution. Reduced freight cost. Biodegradable No p h problems with waste water Free rinsing Neutral so it won’t harm any finish Won’t harm human skin when used. CAUTION: FOR INDUSTRIAL USE ONLY. KEEP OUT OF REACH OF CHILDREN!

LYN DISTRIBUTING 965 No. Redwood Road No. Salt Lake, Utah 84054 Phone (801)295-5022 Outside Salt Lake Area 1-800-366-5022

400

400

CONCENTRATED Universal Cleaner & Degreaser

U.S.D.A. RATED A-1 FOR FLOORS, WALLS, AND

EQUIPMENT CLEANING This degreasing cleaner produces a rich foam which quickly penetrates and floats away grease, oil, dirt, bacteria, scum, fats, proteins, food residues, tallow, process wastes and blood from all vertical and horizontal surfaces. This cleaner emulisifies animal fats and oils quickly and economically. It can be used on all floors, walls, tables and equipment in the following areas. Slaughter Houses • Meat Packing Plants • Bakeries and Butcher Shops • Kitchens • Rendering Plants • Food Processing Plants • All Tile and Grout Areas • Super Markets • Food Transport Vehicles • Fish, Poultry & Egg Processing • Dairies • Restaurants • Canneries • Showers • Perfect for use in all meat and food processing areas and industrial and institutional shower stalls • Free rinsing, non-flammable, non-corrosive •Emulsifies grease, oil, and soil • Breaks down fats, protein and waste. • Penetrates any build up • Removes bacteria and blood. PROPERTIES: •Color……………………….………...Clear • Odor………………………..………..None • pH…………………………..…….…..12.6 • Flash Point………………………….None • Fumes………….…………..………..None • Rinsability…………….….…..…Complete • Fat & Oil Emulsification…..…....Excellent DIRECTIONS FOR USE: First scrape heavy accumulations. Food must be removed or covered. Manual application: Use mop, brush or sponge. Dilute one part Super-Solv with twenty parts hot water. Apply and let stand five minutes. Agitate with brush if needed for best results. Rinse well. Spray application: Use full strength in sprayer reservoir. Proportioning device should be set from 1 to 5 for heavy soiled areas; up to 1 to 30 for lighter soil. Apply and let stand five minutes. Agitate with brush if needed. Rinse well afterwards. Shower stall cleaning: Dilute, apply and rinse as above. For best results, follow with a mild acid cleaner (C.L.A.S.S. ) for maximum removal of water minerals and soap scum. For maximum deodorizing action and control of bacteria and mildew, apply a disinfectant as a third and final step. Packaged in 6 each 1 gallon bottles, 6 gallon pail, 30 gallon drum, 55 gallon drum, or 330 gallon disposable tote. LYN DISTRIBUTING 965 No. Redwood Road, North Salt Lake, Utah 84054Phone in Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

401

401

HIGH FOAMINGVehicle Cleaner

Pressure Washer CleanerTouchless Foam Cleaner makes vehicle cleaning easy. This product is

designed to be used through a foam nozzle attached to a pressure washer toquickly remove dirt, oil, grease, road film, and exhaust from aluminum or paintedsurfaces without attacking the surface. A special ionic detergent system quicklyfloats away road film and grease without use of brushes or other manual devices.This product may be used manually, however, if no pressure washer is available.

Special sequesterants keep equipment free of water mineral scale. Thisproduct rinses freely, leaving no film or residue when used as directed. May beused to clean any surface soiled with dirt, oil, traffic film, etc. Brightensaluminum surfaces without the use of acid.

Use on: Cars •• Trucks •• Buses •• Airplanes ••Tank Trucks ••Aluminum Siding

Use as a one step cleaning operation, that leaves no film or residue and is safe on all surfaces.This product is highly concentrated, dilute one part concentrate to 25 parts water for pressurecleaning of heavy soil or traffic film. May be diluted with up to 100 parts water forlight soil. Please note: While this product is safe to use on aluminum and paintedsurfaces when diluted according to the directions, it may remove wax fromsurface.

LYN LYN DISTRIBUTINGDISTRIBUTING 965 NORTH REDWOOD ROAD, NORTH SALT LAKE, UTAH 84054

PHONE 801-295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

402

402

CONCENTRATED STEAM & PRESSURE WASHING

LIQUID CLEANER! HEAVY DUTY

• REDUCED SCALING AND CLOGGING OF EQUIPMENT

• NO TOXIC FUMES • FREE RINSING • CONTROLLED FOAM • REMAINS STABLE AT LOW AND HIGH TEMPERATURES

DIRECTIONS FOR USE This is a heavy duty, fast acting, concentrated liquid steam cleaner. Specifically formulated for removal of grease, oils; and imbedded soils on metal, wood, concrete, ceramic tile and most painted surfaces. This product works well in steam cleaners, high pressure washers, and other high pressure spray systems(enclosed jet washer systems). TD-3 contains special inhibitors to protect against corrosion, scale and damage to heating coils. DILUTION RATIOS: Light duty cleaning................1 part TD-3———128 parts water. Medium duty cleaning...........1 part TD-3———64 parts water. Heavy duty cleaning..............1 part TD-3 ———32 parts water. For automatic proportioning equipment adjust tell the cleaning effectiveness is satisfactory. Rinse the detergent cleaner with clean water after use. Always check to be sure that this product does not effect surface to be cleaned at the dilution you choose. TD-3 provides convenient effective cleaning in and easy to use liquid form. CAUTION: Contains sodium hydroxide. Avoid contact with eyes, skin, mucous membranes. KEEP OUT OF REACH OF CHILDREN LYN DISTRIBUTING 965 No. Redwood Road No. Salt Lake, Utah 84054 Phone (801)295-5022 Outside Salt Lake Area 1-800-366-5022

• WORKS WELL IN ALL KINDS OF WASHING EQUIPMENT • LIQUID FOR EASY DILUTION AND MIXING

403

403

CONCENTRATED STEAM & PRESSURE WASHING

LIQUID CLEANER! HEAVY DUTY

• REDUCED SCALING AND

CLOGGING OF EQUIPMENT • NO TOXIC FUMES • FREE RINSING • HIGH FOAMING • REMAINS STABLE AT LOW AND

HIGH TEMPERATURES

DIRECTIONS FOR USE This is a heavy duty, fast acting, concentrated liquid steam cleaner. Specifically formulated for removal of grease, oils; and imbedded soils on metal, wood, concrete, ceramic tile and most painted surfaces. This product works well in steam cleaners, high pressure washers, and high foaming applicators. This product when foamed will cling to vertical surfaces. TD-5 contains special inhibitors to protect against corrosion, scale and damage to heating coils. DILUTION RATIOS: Light duty cleaning................1 part TD-5———128 parts water. Medium duty cleaning...........1 part TD-5———64 parts water. Heavy duty cleaning..............1 part TD-5———32 parts water. For automatic proportioning equipment adjust until the cleaning effectiveness is satisfactory. Rinse the detergent cleaner with clean water after use. Always check to be sure that this product does not effect surface to be cleaned at the dilution you choose. TD-5 provides convenient effective cleaning in an easy to use liquid form. CAUTION: Contains sodium hydroxide. Avoid contact with eyes, skin, mucous membranes. KEEP OUT OF REACH OF CHILDREN LYN DISTRIBUTING 965 No. Redwood Road No. Salt Lake, Utah 84054 Phone (801)295-5022 Outside Salt Lake Area 1-800-366-5022

• WORKS WELL IN STEAM & PRESSURE WASHING EQUIPMENT

• LIQUID FOR EASY DILUTION AND MIXING

404

404

TOP CLEAN VINYL COATED FLOOR CLEANER SHOULD BE USED IN A 2-4 GALLON PUMP UP SPRAYER. TOP CLEAN IS A HEAVY DUTY CLEANER THAT WILL DEEP CLEAN SURFACES WITH LITTLE TO NO AGITATION. JUST SPRAY IT ON SURFACE TO BE CLEANED, LET IT SET SO THAT IT MAY PENETRATE SOIL, FOOD, SURUP AND SUGARS, THEN BRUSH LIGHTLY AND RINSE OR MOP OFF SURFACE.

APPLY THIS PRODUCT TO THE FLOOR OR ANY SURFACE WITH THE

SPRAYER AND ALLOW IT TO REMAIN WET ON SURFACE FOR 1 TO 2 MINUTES AGITATE WITH BRUSH THIS WILL CLEAN THE GROVES THAT ARE ON THE VINYL FLOOR COVERING. MOP FLOOR CLEAN WITH CLEAR WATER FROM MOP BUCKETS. BE CAREFUL WHEN USING THIS PRODUCT ON VINYL COATED FLOORS BECAUSE THEY WILL BE SLIPPERY. THIS PRODUCT IS PURPLE IN COLOR. A WET/DRY FLOOR VACUUM MAY BE USED TO PICK-UP DIRTY RESIDUE AND REDUCE DRYING TIME.

This product may be diluted from 1 part concentrate to 10 – 100 parts water.

CAUTION: Safety glasses and protective gloves should be worn when using this product.

KEEP OUT OF REACH OF CHILDREN. PLEASE NOTE: The use of this material being subject to conditions beyond the seller’s control, seller makes no warranty of any kind expressed or implied as to the material or its use. The user must assume all liability when using this product.

LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, UT 84054 Phone in Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022 www.lyndist.com

TOP CLEAN HEAVY DUTY CLEANER

FOR GENERAL CLEANING

SPRAY IT ON LET IT SET BRUSH THEN RINSE.

405

405


TRUCK & TRAILER CLEANER, NEUTRALIZER FOR 2 STEP

CLEANING SYSTEM OR MAY BE USED BY ITSELF

T.R.-T.N. IS A POWERFUL CLEANER FOR WASHING EQUIPMENT, SEMI-

TRAILERS, TRUCKS, AND MACHINERY

CUTS THROUGH BAKED ON ROAD FILM, OIL AND GREASE QUICKLY AND EASILY! • Adheres to soil for greater wetting and penetration-blasts away stubborn dirt! • Super concentrated for the most economical cleaning with high-pressure equipment! • Incredibly powerful contact agents act on impact! • Excellent results with cold or hot water-steam, too! • More effective pressure cleaning at any temperature or p.s.i.! It takes more than a strong pump in a pressure washer to do a first class cleaning job! The brute force of high pressure cleaning alone won’t remove baked on dirt and grease! Specially formulated, T.R.-T.N. pressure wash detergent penetrates deep to break down hard-to-remove soil that water alone can’t move. Directions: T.R.-T.N. is diluted with 50 to 100 parts for general cleaning of truck or trailer surface. We recommend application with a pressure sprayer and rinsed with pressure. When used in a 2-step system used the acid based cleaner (T.R.-T.A.) first.

LYN DISTRIBUTING 965 No. Redwood Road, North Salt Lake, Utah 84054 Phone (801)295-5022 Outside Salt Lake Area (800)366-5022

406

406

Description: This product is a solvent free cleaner and degreaser with powerful detergents and surfactants.Water softening agents allow it to work well in hard or soft water. Contains wetting agents to permit deep,penetrating, cleaning action. This is a medium sudsing product that is safe on aluminum and leaves no soapfilm.

Directions: Dilute with water to the concentration desired for effective cleaning:Wax Stripping: 1:15 Pressure Washer/Steam Cleaning: 1:20Floor Cleaning: 1:30 Car and Truck Wash: 1:20Spot Remover: 1:5 Machinery and Equipment: 1:10Aircraft Cleaning: 1:5 Carpet and Upholstery Cleaner: 1:40For removal of rubber tire marks from Concrete floors use undiluted with agitation.For grease, oil film, hard water deposits: 1:5For Heavy Duty degreasing before -pressure washing 1:5-10General purpose cleaner: 1:20-50Apply with a sprayer, sponge, brush or steel wool. Agitate as required. Rinse thoroughly with water. Allow toair dry or wipe dry on smooth surfaces.

CAUTION: Eye irritant. Contains sodium metasilicate. Avoid contact with eyes. If eye contact occurs, flushwith water for 15 minutes. If irritation persists, consult a physician. Do not take internally. If swallowed, do notinduce vomiting. Drink large volumes of clear water followed by a weak vinegar solution. If irritation persists,call a physician. KEEP OUT OF REACH OF CHILDREN.CONTAINER DISPOSAL: Triple rinse and dispose of container in accordance to local regulations.

Spill Or Leakage Procedures: Dike and contain. Recollect for reuse of concentrate. After removal of excessfluid, neutralize residual with vinegar water. Very small spills may be washed down the sewer. Dispose of inaccordance with all local, state and federal regulations.

HMIS RATING: Health-1; Flammability-0; Reactivity-0; Personal Protection-B.


• NON BUTYL CLEANER• FAST ACTING AND SAFE• CONTAINS NO CAUSTIC SODA• ph CONTROLED

407

407

Vehicle Wash Kit-101 Automotive concentrated vehicle washing kit

This kit was prepared to reduce shipping cost’s for Car Wash Owner’s everywhere. This kit contains water softeners, wetting agents, penetrants, rinsing agents and detergent builders for a economically priced high performance car washing detergent. This kit is easy to blend on location at your car wash. This is a very concentrated kit to make 55 gallon of concentrated automotive wash detergent. This kit cannot be combined until you mix it in a 55 gallon drum with soft or hard water. This kit is a great cost cutter because it saves freight charges for the end user.

DIRECTIONS: First add 27 ½ gallon of soft water to a open top 55 gallon drum, then add the box of powdered product label builders and water softeners. Mix this with a paddle for 3 minutes or until this part is dissolved, then add the pail labeled wetting agents and penetrants to the 55 gallon drum, stir for 3 minutes then fill with soft water and now you have a 55 gallon drum of concentrated automotive washing detergent that may be diluted as far as 1 part to 200 parts water for washing light dirt from automotive finishes. This product is free rinsing and leaves a vehicle clean and film free.

Caution: Do not take internally. If ingested, contact physician immediately. If eye or skin contact occurs, flush area with clear water for 5 minutes. Seek medical attention if irritation persists. Keep containers sealed when not in use to prevent loss or contamination. Rinse empty container before discarding in an authorized landfill site. FOR INSTITUTIONAL & INDUSTRIAL USE ONLY

LYN DISTRIBUTING 965 No. Redwood Road No. Salt Lake, UT 84054 Phone 801-295-5022 Outside Salt Lake Area 1-800-366-5022

408

408

• Concentrated-Dilutes with water

• Powerful- Penetrates through Dirt, Grease and oil

• Restores Like-New Appearance to White Wall Tires

• Safe-Biodegradable-Will Not Harm Rubber

This concentrated, biodegradable white side-wall tire cleaner may be used as received or diluted with water up to 1:6, yet still clean and impart a “like-new” look to discolored and soiled tires. Product is ideal for use by auto dealerships, service stations, fleet services, car wash installations, car rental agencies, and taxi and transport services. This formulation requires a minimum of labor to rapidly and effectively remove dirt, oil, grease, road film, and rubber burns from white walls. No harmful chemical compounds, low odor, non-flammable, safe on rubber, rapid activity. Cleaned surfaces are bright, white, and free of residue. Directions for use: For maximum efficiency, wet tires with diluted product from “high volume trigger sprayer” or 1-3 gal. hand pressure (#2102,#2103,or #2101) sprayer. Apply this solution to two tires to allow product to penetrate and emulsify soils and grease. This product works so well that usually you just spray the tire surface off with a pressure washer, if a pressure washer is not available agitate surface with brush, flush with clear water. Repeat this procedure on remaining tires. Always rinse tire completely. Allow to air dry. CAUTION: Do not take internally. If this should occur, drink large amounts of water and acid fruit juice or a solution of water and vinegar. Do not induce vomiting. Contact physician. For eye or skin contact, flush area with clear water for 15 minutes. Seek medical attention if irritation persists. To avoid accidents, wear safety equipment during application procedure. LYN DISTRIBUTING 965 No. Redwood Road No. Salt Lake, UT 84054 Phone (801)295-5022 Outside Salt Lake Area (800) 366-5022

409

409

WINDSHIELDWASHER SOLVENT& ANTIFREEZE SAVE MONEY AND BE EARTH FRIENDLY BY REFILLING YOUR EMPTY CONTAINERS

Windshield washer solvent is formulated to be used as an automotive and truck windshieldwashing cleaner. Special ingredients remove road film, salt residue, and insects.Windshields sparkle, and will not streak when wipers are used. This product may also beused to polish chrome on automobiles. This product maybe diluted 1 part cleaner to 1 partwater in winter months to resist freezing. See use dilution chart for dilution ratio to be usedin automobile reservoir according to temperature protection desired.

AREAS FOR USE:New & used car dealers.Large trucking companies.Police departments.City fleet maintenance.Service Stations.Construction companies.

Packaging:12 / 24 Quarts per case6 Gallons per case5 Gallon cubtainers5 Gallon Headpacks30 Gallon drums55 Gallon drumsBulk tanks > 110 gallons

DIRECTIONS FOR USE:1 part concentrate to: Freezing Point °C1 part water…………………………………..-5

SAFETY:Danger: POISON - Contains Methyl Alcohol (Methanol). May be fatal or cause blindness if

swallowed. Vapor harmful. Keep out of reach of children. Cannot be made non poisonous. Avoidcontact with eyes. Use only in a well ventilated area. Keep away from heat and open flame. Do not storein open or unlabeled containers. DANGER: flammable.

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD NORTH SALT LAKE, UT. 84054PHONE 801-295-5022 OUTSIDE SALT LAKE & DAVIS COUNTY AREA 1-800-366-5022

410

410

WINDSHIELD WASHER SOLVENT & ANTIFREEZE CONCENTRATE

Save Money And Be Earth Friendly By Refilling Your Empty Containers Windshield washer solvent is formulated to be used as an automotive and truck windshield washing cleaner. This concentrate is to be diluted with water prior o use. Special ingredients remove road film, salt residue, and insects. Windshields sparkle, and will not streak when wipers are used. This product may also be used to polish chrome on automobiles. This product maybe diluted 1 part concentrate to 10 parts water in winter months to resist freezing. See use dilution chart for dilution ratio to be used in automobile reservoir according to temperature protection desired.

Areas For Use: New & used car dealers. Large trucking companies. Police departments. City fleet maintenance. Service Stations. Construction companies. Packaging: Directions For Use: 12 / 24 Quarts per case 1 part concentrate to: Freezing Point °C 6 Gallons per case 1 part water…………………………………..-45 5 Gallon cubtainers 2 parts water………………………………….-25 5 Gallon Headpacks 3 parts water………………………………….-18 30 Gallon drums 4 parts water………………………………….-12 55 Gallon drums 5 parts water………………………………….-10 Bulk tanks > 110 gallons 10 parts water…………………………………-3 SAFETY: Danger: POISON - Contains Methyl Alcohol (Methanol). May be fatal or cause blindness if swallowed. Vapor harmful. Keep out of reach of children. Cannot be made non poisonous. Avoid contact with eyes. Use only in a well ventilated area. Keep away from heat and open flame. Do not store in open or unlabeled containers. DANGER: Concentrate is flammable.

LYN DISTRIBUTING 965 No. Redwood Road No. Salt Lake, UT 84054 Phone 801-295-5022 Outside Salt Lake 1-800-366-5022

411

411

This concentrated cleaning product is formulated with the grease and stain cutting power of 'chlorine. Designed for use in a wide variety of applications and dilution ratios for economical and versatile performance. Creates a clinging foam when used with any appropriate foamer or foam generating equipment. Ideal for removing heavy dirt, mildew, and scum from shower room floors and walls.

DIRECTIONS: Dilute this concentrate with warm or cold water. Use 1 part concentrate diluted with 3 to 10 parts water when extreme cleaning power is required. Use dilutions of up to 1:50 for lighter cleaning chores. Dilution ratios may be adjusted to give the desired results and speed of cleaning with the application method employed. This product will produce a thick clinging foam when applied with foam generating sprayers.

CHLORINATED FOAMING CLEANER

HIGH FOAMING CONCENTRATE WITH CHLORINE BLEACH FOR MAXIMUM CLEANING POWER

CAUTION: Irritant. See side panel for further cautions and first aid instructions.

CAUTION: Irritant. Contains sodium hypochlorite bleach. Avoid contact with eyes, skin, mucous membranes, or clothes. Do not mix with acids or any other cleaning chemicals. In case of eye contact, flush with plenty of cool water for at least 15 minutes, and obtain medical attention. Wash hands and skin after contact. If swallowed, give one or two glasses of water and call a physician immediately. KEEP OUT OF REACH OF CHILDREN

NET CONTENTS:

X-IT-OUT

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE, UTAH 84054 PHONE (801) 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

412

412

73QG14-10 Heavy Duty Sprayer for Cleaning

and/or Sanitizing • Accurately mixes cleaners or sanitizers with water as

you spray. • Convenient automatic cleaning eliminates hand

mixing soap and water. • Exclusive rinse lever switches to rinse instantly. • For cleaning trucks, walls, floors, commissaries, etc.;

Degreasing meat cutting rooms, equipment, etc.; Sanitizing equipment, utensils, etc.

Features: • Simple and easy to use. Pre-set ratios

eliminate hand mixing of chemicals with water.

• All brass mixing head, metering stem, and internal parts for long, trouble -free operation.

• Patented, comfortable, insulated handle for spraying boiling hot or ice cold water with no additional hand protection.

• Unique anti-siphon device built into handle meets all plumbing code requirements for protection against accidental contamination of water supplies.

• Easy to fill, wide mouth, chemical resistant polyethylene quart bottle.

• Colorful orange grips and black cap.

Applications: Clean, disinfect and deodorize the following:

• Meat cutting rooms and equipment • Food processing areas • To clean truck, cars, etc. • To clean walls, floors, etc. • Waste disposal equipment. • Restrooms • Showers • Animal containment areas • Many others

Operational Specifications: Water 40-90 psi ( for maximum accuracy 40 to 60 Pressure psi )

Output 3 gallons per minute

Metering Preset at factory to insure proper mix.

Standard 1/4 ounce of a DQ-10 weight chemical per Ratio gallon of water sprayed.

Customized Available from ¼ ounce per gallon to 9 Ratios ounces per gallon. (Note: this range is affected

by the viscosity of the chemical.)

Spray Adjustable fan deflector for covering large Pattern areas, removable for solid stream which

carries up to 30 feet.

Quick Coupler and Shut-Off-Valve Are optional accessories for added convenience and safety.

Lyn Distributing 965 North Redwood, North Salt Lake, Utah 84054

Phone 801-295-5022 Fax 801-295-5044 Web site www.lyndist.com

413

413

73QG-10 Heavy Duty Sprayer for Cleaning

and/or Sanitizing • Accurately mixes cleaners or sanitizers with water as

you spray. • Convenient automatic cleaning eliminates hand

mixing soap and water. • Exclusive rinse lever switches to rinse instantly. • For cleaning trucks, walls, floors, commissaries, etc.;


Features: • Simple and easy to use. Pre-set ratios






• Colorful orange grips and black cap.

Applications: Clean, disinfect and deodorize the following:

• Meat cutting rooms and equipment • Food processing areas • To clean truck, cars,etc. • To clean walls, floors, etc. • Waste disposal equipment. • Restrooms • Showers • Animal containment areas • Many others


Output 3 gallons per minute

Metering Preset at factory to insure proper mix.

Standard 2 ounces of a water weight chemical per Ratio gallon of water sprayed.

Customized Available from ¼ ounce per gallon to 9 Ratios ounces per gallon. (Note: this range is affected

by the viscosity of the chemical.)

Spray Adjustable fan deflector for covering large Pattern areas, removable for solid stream which

carries up to 30 feet.

Quick Coupler and Shut-Off-Valve Are optional accessories for added convenience and safety.



414

414

75QGFMR-10 Heavy Duty Foam Sprayer for

Cleaning and/or Sanitizing Adjustable Metering

• Accurately mixes foaming and/or non-foaming cleaners or sanitizers with water as you spray.

• Convenient automatic cleaning eliminates hand mixing soap and water.

• Detach handle for a powerful spray rinse. • For cleaning trucks, walls, floors, commissaries, etc.;


• Foam generating wand creates thick clinging foam to increase surface contact time.

Features: • Simple and easy to use. Adjustable ratios






• Colorful orange grips and orange cap.

Applications: Clean and/or disinfect with foaming degreasers detergents, disinfectants, acid or caustic cleaners or soaps.

• Supermarket or packing-house meat cutting rooms and equipment.

• Food handling or processing areas. • To clean truck, cars, etc. • To clean walls, floors, etc. • Waste disposal equipment. • Restrooms or locker rooms. • Showers


Output 1.5 gallons per minute

Metering 1 ounce to 10 ounces adjustable per gallon of water sprayed. (Note: this range is affected by the viscosity of the chemical.)

Spray Foaming attachment provides a fan spray, Pattern removable for solid stream which carries up to

30 feet. A fan deflector is available for non-foaming chemicals.

Quick Coupler and Shut-Off-Valve

Are optional accessories for added convenience and safety.



415

415

Hydrofoamer 481 - 96 ounce container hose end foamer

Hydrofoamer 483 48 ounce hose end foamer sprayer

The Hydrofoamer 483 - 48 ounce or Hydrofoamer 481 96 ounce tank size can be controlled using the trigger on

the spray gun and to clean the device, the concentrate container is easily disconnected via a fast coupler. The hydrofoamer 483/481 is non-electric and no installation is required, making it extremely user-friendly.

Hydrofoamer 483/481 hose end proportioners combine automatic dilution with convenient control of where and how solution is applied. Hydrofoamers provide a thick, rich foam for more cling time on the surface being

cleaned. On and off functions are controlled using a trigger on the spray gun. To rinse, the concentrate container is disconnected via a quick coupler. Dilution control tips supplied with the hydrofoamer 483 or 481.



HydroFoamer 481, 483 or HydroSprayer 381, 383 Spray Gun without Quick coupler. Insulated grip Spray Gun # HYD210

Quick Coupler for HydroFoamers or HydroSprayers. Couples Lids to Spray Guns #HYD211

HydroFoamer Lid for 48 ounce or 96 ounce HydroFoamers. HydroFoamer 483 or HydroFoamer 481. Connects to quick coupler for operation of the 2 models of hydrofoamers. # HYD214

416

416

Hydro Foamer Models 481 & 483

Package Contains:1. Injection molded assembly:

foaming barrel, handle, and eductor.2 . Concentrate container:

Model 481 - 96 oz., Model 483 - 48 oz.

3. Suction tube/strainer.4. Spray nozzle with quick disconnect assembly.5 . Metering tip kit.6 . Product information sheet.

Tip Color Drill Size Ratio Oz/Gal.

No Tip 12:1 10Gray 30 * *Black 40 * *Beige 50 * *Red 55 * *White 57 14:1 9Blue 60 16:1 8Tan 65 18:1 7Green 70 26:1 5Orange 72 32:1 4Brown 74 * *Yellow 76 42:1 3Aqua 77 * *Purple 79 64:1 2Pink 87 128:1 1

Operation:1. Unscrew foamer lid assembly from container.2. Select a metering tip using the chart below as a guideline and press the tip firmly into the hose barb on the bottom of the

lid assembly. Install the suction tube on the hose barb.3. Fill the container with concentrate. Screw foamer lid assembly securely onto container.

CAUTION: Foamer lid assembly must be securely fastened to container to prevent accidentalspilling of concentrate during use of foamer.

4. Insert foamer lid assembly into female quick connect on spray nozzle.5. Connect a garden hose with 3/4" male garden hose thread to the base of the spray nozzle handle. Turn on the water supply

to the hose. (Minimum 25 PSI water pressure is required to operate the foamer.)6. Grasp the spray nozzle handle in one hand and the foamer container in the other. Squeeze the spray nozzle handle to

begin foaming. Continuous operation can be achieved by usingthe handle lock provided on the spray nozzle. Rinse bydisconnecting the spray nozzle from the foaming lid assembly. To remove the foamer from the spray nozzle, simply graspthe quick connect on the spray nozzle in one hand and the foamer assembly in the other. Pull in opposite directions. (Theoutside collar around the quick connect will slide toward the spray nozzle, disengaging the foamer barrel.)

Metering Tip Selection:Dilution ratios below were achieved at 40 PSI, cold water and water-thin viscosity (1.0 CP). Ratios will vary given PSI, waterand ambient temperature, water flow rate, and product viscosity. At water-thin viscosity, the efficiency of the eductor is at itsmaximum with the black or gray tip. Removal of the foot strainer on the concentrate pick-up tube will also change these ratios.*If no tip is listed, the dilution ratio delivered falls between those shown.

THANK YOU FOR YOUR INTEREST IN OUR PRODUCTSPlease use this equipment carefully and observe all warnings and cautions.

**************************************************************** NOTE ****************************************************************protective clothing and eyewear when dispensing chemicals or other materials.

observe safety and handling instructions of the chemical manufacturers.

direct discharge away from you or other persons or into approved containers.

dispense cleaners and chemicals in accordance with manufacturer's instructions. ExerciseCAUTION when maintaining your equipment.

equipment after each use in accordance with instruction sheet.

protective clothing and eyewear when working in the vicinity of all chemicals, filling or emptyingequipment or changing metering tips.

re-assemble equipment according to instruction procedures. Be sure all components are firmlyscrewed or latched into position.

only to tap water outlets (85 PSI maximum).

WEAR

ALWAYS

ALWAYS

ALWAYS

CLEAN

WEAR

ALWAYS

ATTACH

417

417

HydroFoamer Parts List

2

4

5

6

3

Troubleshooting:

Problem Cause Remedy1. Unit does not draw a . Clogged suction tube a . Clean or replace

concentrate strainerb. Metering tip orifice b. Rinse tip or replace: Do not attempt to clean:

obstructed may alter size of orificec. Water pressure too low c. Minimum 25 PSI requiredd. Mineral deposits in d. Back flush unit. Remove container, suction

in barrel of foamer tube and metering tip. Put finger over barrelopening. Apply minimal water pressure throughgarden hose at nozzle of barrel to be flushed.

d. Descale foamer by soaking in weakdescaling solution.

e . Clogged water inlet e . Clean or replace strainer.strainer (low water flow)

2. Weak foaming action a . Clogged water inlet a . Clean or replacestrainer

b. Water pressure too low b. Minimum 25 PSI requiredc. Water temperature too c. Use lower temp water source. (Concentrate

high flow decreases above 140º F water)

If above steps fail to produce good concentrate draw and/or foaming action, replace lid assembly. Seecomponent chart below.

KEY PART NO. DESCRIPTION1 10083713 Spray nozzle & quick disconnect2 10061501 Foamer lid assembly3 688201 Concentrate container - 96 oz.

688202 Concentrate container - 48 oz.4 690014 Metering tip kit5 500808 Suction tube, 8"6 609600 Foot strainer

10061551Rev. A 7/07

1

Hydro Systems Company3798 Round Bottom RoadCincinnati, OH 45244 USAPhone: (513) 271-8800Fax: (513) 271-0160

418

418

Chemicalresistant sprayer

# E1038-3

Poly bottle 36ounces

# E936-10

P V C bottle 36ounce

# E936b-10

# E942p-102 quart pressure sprayer

16 ouncecrafe bottle

32 ouncecrafe bottle

32 ouncecylinder bottle

4 ouncecylinder bottle

1 gallon flat topbottle

LYN DISTRIBUTING 965 No. Redwood No. Salt Lake, Utah 84054Phone 801-295-5022 Out Side Salt Lake Area 800-366-5022

419

419

#E1041--- 7" tube#E1041A---9" tubeRED & WHITE OR

ALL WHITEFOAMER

#QT7900-10

ECONOMYFOAMER

#Q3333-10HIGH VOLUME

SPRAYER3 TIMES THE

VOLUME

#E1039---7"tube#E1039A---9"tube

HEAVY DUTYSPRAYER

BLUE OR GREEN2 times the volume

#E1040---7"tube#E1040A-3-9"tubeREGULAR SPRAYER

WILL BE TWOCOLORS

Red & white or blue &white

tip resistant bottle#E936-10---bottle

36oz. metered

#E1043PS-3---LynSafety bottle 24oz.

#E1042--- bottle22oz. metered

LYN DISTRIBUTING 965 No. Redwood No. Salt Lake, Utah 84054Phone 801-295-5022 Out Side Salt Lake Area 800-366-5022

SPRAYERS & BOTTLES

420

420

SURE SHOT SPRAYER Model A No. 1000 STEEL TANK WITH POWDER COLOR COAT, 1 QUART SIZE

Colors: Green, Red, Black

Sure Shot Sprayer Model A Number 1000 POWDER COATED FINISH STEEL SURE SHOT SPRAYER. Comes With Multi Purpose Nozzles (301 and 302). Nozzle Is Set For Regular Mist. For Pin Stream Remove 303 Spiral. Do not use water or water-based materials in steel sure shot sprayers. Sure Shot sprayers are an inexpensive way to apply bulk chemicals like cleaners, degreasers, penetrating oils, solvents and lubricants. Sure Shot Sprayers use readily available compressed air, instead of flammable and/or dangerous propellants,

and because they are refillable hand sprayers you don't have to worry about disposal of empty cans. Manufactured since 1932, Sure Shot Sprayers are the leader in Refillable, Rechargeable, completely portable compressed air sprayers. Not recommended for paint. Remove 303 spiral for pin stream, replace for regular

mist. spiral can easily be removed with a needle nose pliers.

SURE SHOT SPRAYER MODEL 1002 STEEL TANK WITH POWDER COLOR COAT 1 QUART with nozzle 602

SURE SHOT SPRAYER MODEL 1002 POWDER COATED FINISH STEEL SURE SHOT SPRAYER With Nozzle Number 602, Adjustable From Extra Fine Mist To Pin Stream. Sure Shot sprayers are an inexpensive way to apply bulk chemicals like cleaners, degreasers, penetrating oils, solvents and lubricants. SURE SHOT

SPRAYER MODEL 1002 use readily available compressed air, instead of flammable and/or dangerous propellants, and because they are refillable hand sprayers you don't have to worry about disposal of empty cans.

Manufactured since 1932, Sure Shot Sprayers are the leader in Refillable, Rechargeable, completely portable compressed air sprayers. Do not use water or water-based materials in steel SURE SHOT SPRAYER MODEL

1002. Not recommended for paint. Black only for this sprayer

LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE, UTAH PHONE 801-295-5022 OUT SIDE SALT LAKE AREA 1-800-366-5022

421

421

SURE SHOT SPRAYER Model A 1100 STEEL TANK

WITH NICKEL PLATED FINISH 1 QUART SURE SHOT SPRAYER Model A 1100 NICKEL-PLATED FINISH STEEL SURE SHOT SPRAYER With

Multi Purpose Nozzles (301 and 302). Nozzle Is Set For Regular Mist. For Pin Stream Remove 303 Spiral. Do not use water or water-based materials in SURE SHOT SPRAYER Model A 1100 steel sprayers. Not

recommended for paint. Remove 303 spiral for pin stream, replace for regular mist. spiral can easily be removed with a needle nose pliers. Sure Shot sprayers are an inexpensive way to apply bulk chemicals like cleaners, degreasers, penetrating oils, solvents and lubricants. SURE SHOT SPRAYER Model A 1100 use readily

available compressed air, instead of flammable and/or dangerous propellants, and because they are refillable hand sprayers you don't have to worry about disposal of empty cans. Manufactured since 1932, Sure Shot

Sprayers are the leader in Refillable, Rechargeable, completely portable compressed air sprayers. Not recommended for paint.

Sure Shot Sprayer 2602 Orange Powder Coated Finish Brass Sprayers With Nozzle No.602

Sure Shot Sprayer 2602 Orange Powder Coated Finish Sure Shot Brass Sprayers With Nozzle #602, Adjustable From Extra Fine Mist To Pin Stream. Do not use ammonia or ammonia-based materials in brass Sure Shot

Sprayers 2602. Not recommended for paint. Brass Sprayers are for use with water based products. Sure Shot sprayers are an inexpensive way to apply bulk chemicals like cleaners, degreasers, penetrating oils, solvents and

lubricants. Sure Shot Sprayers use readily available compressed air, instead of flammable and/or dangerous propellants, and because they are refillable hand sprayers you don't have to worry about disposal of empty cans.

Manufactured since 1932, Sure Shot Sprayers are the leader in Refillable, Rechargeable, completely portable compressed air sprayers.


422

422

SURE SHOT SPRAYER 1102 STEEL TANK WITH NICKEL PLATED FINISH

1 QUART with 602 nozzle SURE SHOT SPRAYER 1102 NICKEL-PLATED FINISH STEEL SURE SHOT SPRAYER Comes With

Nozzle Number 602, Adjustable From Extra Fine Mist To Pin Stream. Do not use water or water-based materials in SURE SHOT SPRAYER 1102 steel sprayers. Not recommended for paint. SURE SHOT

SPRAYERS No. 1102 are an inexpensive way to apply bulk chemicals like cleaners, degreasers, penetrating oils, solvents and lubricants. Sure Shot Sprayers use readily available compressed air, instead of flammable and/or dangerous propellants, and because they are refillable hand sprayers you don't have to worry about

disposal of empty cans. Manufactured since 1932, Sure Shot Sprayers are the leader in Refillable, Rechargeable, completely portable compressed air sprayers.

SURE SHOT SPRAYER 2002 BRASS TANK WITH CHROME PLATED FINISH

1 QUART with 602 nozzle SURE SHOT SPRAYER 2002 CHROME-PLATED PREMIUM FINISH Sure Shot Brass Sprayers Comes

With Nozzle Number 602, Adjustable From Extra Fine Mist To Pin Stream. Do not use ammonia or ammonia-based materials in SURE SHOT SPRAYER 2002. Not recommended for paint. Brass Sprayers are for use with

water based products. Sure Shot sprayers are an inexpensive way to apply bulk chemicals like cleaners, degreasers, penetrating oils, solvents and lubricants. Sure Shot Sprayers use readily available compressed air,

instead of flammable and/or dangerous propellants, and because they are refillable hand sprayers you don't have to worry about disposal of empty cans. Manufactured since 1932, Sure Shot Sprayers are the leader in

Refillable, Rechargeable, completely portable compressed air sprayers.

Sure Shot Sprayer Model 2600 Orange Powder Coated Finish Sure Shot Brass Sprayers

Comes With Multi Purpose Nozzles (No.301 and No. 302) Sure Shot Sprayer Model 2600 Orange Powder Coated Finish Brass Sprayers Comes With Multi Purpose

Nozzles (No.301 and No.302). Nozzle Is Set For Regular Mist. For Pin Stream Remove No.303 Spiral. Do not use ammonia or ammonia-based materials in Sure Shot Sprayer Model 2600 brass sprayers. Not recommended for paint. Remove No. 303 spiral for pin stream, replace for regular mist. spiral can easily be removed with a

needle nose pliers.


423

423

FOR INSTITUTIONAL & INDUSTRIAL USE ONLYThis highly concentrated, low sudsing, automatic dishwashing liquid is formulated using alkaline materials for maximumemulsification of grease and oil from dishes, silverware, glasses, and pots and pans. The convenient liquid form goesinto solution with water faster and more completely than the powdered forms. Anti-foam agents, water conditioners, andrinse additives enhance the performance of the product as well as to protect the machine lines.

DIRECTIONS FOR USE:Use this product according to machine manufacturer's instructions, or as a general use dilution: 8 liquid ounces to chargemachine and add 4 liquid ounces for each additional eight trays of utensils. For soft water, reduce amounts of productadded to machine.

NOTE: Do not use this product on hand-painted, silk-screened, or gold or silver leaf dishware.

CAUTION: Product is strongly alkaline. Do not ingest. If this does occur, drink large amounts of water and acid fruit juiceor a solution of vinegar and water. For skin, wash with solution of vinegar and water. For eye contact, flush with clearwater for 15 minutes, then apply a commercial boric acid eye wash. Seek medical attention if irritation persists. Keepcontainer sealed, when not in use and avoid storage where freezing may occur. Rinse empty container before discardingin an authorized landfill site.

PRECAUTIONS: Causes severe burns. Avoid contact with eyes, skin and clothing. Avoid breathing vapor.

Eyes Contacted: Flush thoroughly for 15 minutes with clear water. Get prompt medical attention.

Skin Contacted; Flush with water for 15 minutes. Change clothing, shoes, etc. if wetted with acid.If Swallowed: Drink large quantities of water or milk. Follow with milk of magnesia, beaten eggs, or vegetable oil. Callphysician immediately. Do not mix acid with other chemicals. Keep container closed when not using. Store away fromheat.Product Specifications:Specific Gravity: 1.159Weight Per Gallon: 9.67 lbs.Viscosity: Water-like

Container Disposal: Rinse empty container with water and discard in an authorized landfill site. Do not reuse container.

Manufactured byLYN DISTRIBUTING965 North Redwood RoadNorth Salt Lake, UT 84054(801) 295-5022 WATS (800)366-5022 FAX (801)295-5044E-mail : [email protected] WWW http://www.lyndist.com/

ADDLow Sudsing-High Alkaline Liquid

Detergent for Automatic Dishwashers

• Dissolves & Emulsifies Heavy Soils

• Water Conditioners for Spot-Free DishesAnti-Foaming Agents toPrevent Over-Sudsing

• Corrosion Inhibitors to Protect Machine

424

424


[email protected]

pH test paperin rolls - range 0 - 14

Test paper comes in a plastic compartment with tear tab.1 roll in the compartment will test pH range 0-11 theother roll will test pH range 12-14. Easy to read colorchart like above will tell pH of product.

Water hardness test paper comes in aplastic compartment with tear tab. 1 rollin the compartment will test hardnessfrom 0-20 the other roll will test 0-50hardness. Color chart like above is easyto read for hardness.

LYN LYN DISTRIBUTING DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE, UT. 84054PHONE 801-295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

Water hardnesstest paper inrolls-range 0-50

Chemically treatedtesting paper for liquids

425

425

Test PapersChemically treated paper strips.

Paper strips change color to indicate sanitizer level. 200 stripsand color chart in a waterproof plastic vial.

Chlorine test paper reads 10,50,100,200 ppm total chlorine.Part # test 4250bj-1

Iodine test paper reads 25, 50, 100 ppm iodine.Part # test 2948bj-1

QAC test paper reads 100, 200, 400 ppm QAC (quaternary ammoniumcompounds).

Part # test 2949bj-1

pH test paper reads 0 - 13 pH rangePart # test 2954 -1

LYN DISTRIBUTING LYN DISTRIBUTING 965 NO. REDWOOD ROAD NO. SALT LAKE, UT. 84054PHONE 801-295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

426

426

This product provides the ultimate modern approach to achieve spot-free, sparkling dishes, glasses and silverware-in machine dishwashing. It is the culmination of years of research and field testing. This fluid's special mixture of surface active agents repels water from the dish surface as no other can. This product contains no alcohol or acid and is completely safe to use. It's brillant blue color clearly indicates the flow of fluid to the pump when priming and the level in displacement injectors. Due to the high level of, active ingredients, this product may be diluted to very economical levels of use, yet still render exceptional performance. Even in the hardest water, glasses and dishes dry film and spot free. Often overlooked as an injector fluid's ability to dry dishes fast. This is a must in volume dish wash operations. This product when used as directed dries dishes, glasses and utensils quickly allowing them to be put back in service without delay. This fluid is completely homogenous to provide consistent rinse action. It is also non-corrosive to sensitive injector components such as rubber seals, metering valves, etc. DIRECTIONS:

PITOT BOTTLE-TYPE INJECTORS - Be sure bottle is clean. Fill bottle with fluid. Adjust to approximately 200 parts per million use dilution. Cycle Machine and run dishes through. Check drainage. Adjust until no water breaks appear on dishes. An "orange peel" pattern from water drying off of dishes is best.

HYDRAULIC AND ELECTRIC RINSE PUMPS - Insert feed tube into shipping container and cycle rinse to prime or if pump has prime switch, activate to prime. Adjust metering value or pump stroke to deliver 200 parts per million use dilution. Cycle machine and run dishes through. Check drainage. Adjust until no water breaks appear on dishes.

NOTE - For best results, rinse water should always be between 180°F and 190°F. Also if proper rinsing and drying is not achieved, check rinse nozzles for correct pattern and quantity of rinse.

LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, UTAH 84054 (801)295-5022

QUICKDRAW Concentrated Rinse Additive

PROPERTIES: Color Brilliant Royal Blue Odor Virtually None Density 8.66 Lbs./Gal. pH (Concentrate) 6.0-7.0 Total Actives 45.0% minimum

PACKAGING Drums 55 gallons (208.1 liters) 30 gallons (113.5 liters) 15 gallons (56.7 liters) Pail 6 gallons (22.7 liters) Case 6 each I gallon (6 x 3.785 liters) 4 each I gallon (4 x 3.785 liters)

FOR INSTITUTIONAL & INDUSTRIAL USE ONLY

427

427

This product has been for-

mulated to achieve sparkling spot and streak-free dishes, glasses and silverware and to go one step further. Often with unsoftened and non-deionized rinse water it is impossible to get spot-free dishes and glasses. This product controls the hardness and total dissolved solids of this water to yield consistently excellent results. Also it controls the scale buildup in the rinse tank of conveyor and flight type machines. This product is completely safe to use. Its brilliant magenta color clearly indicates the flow of fluid to the pump when priming and the level in displacement Injectors. Due to the level of active ingredients, this product may be diluted to very economical levels of use, yet still render exceptional performance. Even in the worst water, glasses and dishes dry film and spot-free.

Often overlooked is an injector fluid's ability to dry dishes fast. This is a must in volume dish wash operations. This product when used as directed dries dishes, glasses and utensils quickly allowing them to be put back in service without delay. This fluid is completely homogenous to provide consistent rinse action. It is also non-corrosive to sensitive Injector components such as rubber seals, metering valves, etc. DIRECTIONS: Pilot Bottle-Type Injector-Be sure bottle is clean. Fill bottle with fluid. Adjust to approximately (1 ounce to 8 gallons water) 1 part per thousand 'use dilution'. Cycle machine and run dishes through. Check drainage. Adjust until no water breaks appear on dishes. An "orange I peel" pattern from water drying off of dishes is best.

Hydraulic and Electric Rinse Pumps-insert feed tube into shipping container and cycle rinse to prime or it pump has prime switch activate to prime. Adjust metering value or pump stroke to deliver (1 ounce to 8 gallons water) 1 part per thousand 'use dilution'. Cycle machine and run dishes through. Check drainage. Ad-just until no water breaks appear on dishes. .Note-For best results, rinse water should always be between 180°F-190°F. Also if proper rinsing and drying is not achieved, check rinse nozzels for correct pattern and quantity of rinse. CAR WASH RINSE ADDITIVE: Add to rinse water at the rate of 1 to 2 ounces per 8 to 12 gallons of water. Adjust to proper sheeting action. Car will air dry without spots including windows.

PROPERTIES: pH (as is) Color Odor Viscosity @ 75°F

2.0 Magenta None 80 cps Nominal

LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, Utah 84054 Phone (801) 295-5022 Outside Salt Lake City Area (800) 366-5022

Rinse-Aid Hard Water Rinse Additive

Concentrated Rinse Aid for Dish Machines

& Final Spot Free Rinse

At Drive Through Car washes

Dilutes 1 part concentrate to 750-1000 parts water.

428

428

This product has been for-

mulated to achieve sparkling spot and streak-free dishes, glasses and silverware and to go one step further. Often with unsoftened and non-deionized rinse water it is impossible to get spot-free dishes and glasses. This product controls the hardness and total dissolved solids of this water to yield consistently excellent results. Also it controls the scale buildup in the rinse tank of conveyor and flight type machines. This product is completely safe to use. Its brilliant magenta color clearly indicates the flow of fluid to the pump when priming and the level in displacement Injectors. Due to the level of active ingredients, this product may be diluted to very economical levels of use, yet still render exceptional performance. Even in the worst water, glasses and dishes dry film and spot-free.

Often overlooked is an injector fluid's ability to dry dishes fast. This is a must in volume dish wash operations. This product when used as directed dries dishes, glasses and utensils quickly allowing them to be put back in service without delay. This fluid is completely homogenous to provide consistent rinse action. It is also non-corrosive to sensitive Injector components such as rubber seals, metering valves, etc. DIRECTIONS: Pilot Bottle-Type Injector-Be sure bottle is clean. Fill bottle with fluid. Adjust to approximately (1 ounce to 80 gallons water) 1 part per 10 thousand 'use dilution'. Cycle machine and run dishes through. Check drainage. Adjust until no water breaks appear on dishes. An "orange peel" pattern from water drying off of dishes is best.

Hydraulic and Electric Rinse Pumps-insert feed tube into shipping container and cycle rinse to prime or it pump has prime switch activate to prime. Adjust metering value or pump stroke to deliver (1 ounce to 80 gallons water) 1 part per 10 thousand 'use dilution'. Cycle machine and run dishes through. Check drainage. Ad-just until no water breaks appear on dishes. .Note-For best results, rinse water should always be between 180°F-190°F. Also if proper rinsing and drying is not achieved, check rinse nozzels for correct pattern and quantity of rinse. CAR WASH RINSE ADDITIVE: Add to rinse water at the rate of 1 to 2 ounces per 80 to 120 gallons of water. Adjust to proper sheeting action. Car will air dry without spots including windows.

PROPERTIES: pH (as is) Color Odor Viscosity @ 75°F Total Actives

2.0 Magenta None 80 cps Nominal >60% Minimum

LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, Utah 84054 Phone (801) 295-5022 Outside Salt Lake City Area (800) 366-5022

Rinse-Aid Super Concentrate

Hard Water Rinse Additive Concentrated Rinse Aid for Dish

Machines &

Final Spot Free Rinse At Drive through Car washes

Dilutes 1 part concentrate to 10,000 parts water.

429

429

This remarkable liquid rinse additive combines economy with spot-free, streak-free results. It contains the correct amount of the best available agents to yield excellent results, not a surplus of useless and expensive ingredients. This product contains no alcohol or acid and is completely safe to use. Its brilliant blue color clearly indicates the flow of fluid to the pump when priming. Due to its level of active ingredients, this product may be diluted as far as more expensive additives and yield more economical use, yet still render exceptional performance. Even in the hardest water, glasses and dishes dry film and spot-free. Often overlooked is an injector fluid's ability to dry dishes fast. This is a must in volume dish wash operations. This product when used as directed dries dishes, glasses and utensils quickly allowing them to be put back in service without delay. This fluid is completely homogenous to provide consistent rinse action. it is also non-corrosive to sensitive injector components such as rubber seals, metering valves, etc. This product may also be used as a car wash rinse additive leaving the surface free of water spots and shiny. DIRECTIONS: Hydraulic and Electric Pumps - Insert feed tube into shipping container and adjust metering valve to 300 PPM Upon running dishes through machine, check for drainage. Adjust until no water breaks appear on dishes. Not for use in bottle-type displacement injectors where phase separation is necessary. Note. For best results, rinse water should always be between 180° and 190°F. Carwash Rinse Additive - Add to rinse water at the rate of 1 to 2 ounces per 50 gallons of water. Adjust to proper sheeting action. Car will air dry without spots including windows.

LYN DISTRIBUTING 965 North Redwood Road, North Salt Lake, UT 84054

Phone (801) 295-5022 Outside Salt Lake City Area (800) 366-5022

SPOT FREE Special Rinse Additive

For Dish washers •• Car washes

Use dilution 3 parts concentrate To

10,000 parts water. (1 ounce to 26 gallons water)

PROPERTIES: pH 6.0-7.0 Color Brilliant Blue Odor None Viscosity @ 75°F 30 cps Total Actives, 18%

PACKAGING Drums 55 gallons (208.1 liters) 30 gallons (113.5 liters) 15 gallons 56.7 liters) Pails 5 gallons 18.9 liters) Case 6 each 1 gallon (6 x 3.785 liters)

Car Wash Spot Free Rinse

Quick Dryer For Spot Free Glasses & Dishes

430

430

PURPOSETo remove various types of mineral scales including calcium carbonate, calcium phosphate,and calcium sulfate from HVAC systems and other industrial process equipment. Will notattack metal surfaces including galvanized metal like mineral acid descalers. Also containsskin shield, which makes this considerably safer for handling and usage on equipment.

APPLICATIONDilute from 1-5 or 1-10 with water. Maintain pH from 1.5 to 2.5 to remove scale.Thoroughly rinse system with makeup water until pH of the rinse water is the same as themakeup water.

CAUTIONStrong acid. Wear protective clothing including gloves and eyewear when using. Ifcontact with skin take place, immediately flush thoroughly with water. If contact witheyes take place, immediately flush thoroughly with water for 15 minutes then contactphysician.

STORAGEKeep away from children. Store away from strong caustics or basic solutions. Keepcontainer closed when not in use. This product is for industrial use only.

LYN DISTRIBUTING 965 NO. REDWOOD ROAD, NO. SALT LAKE, 84054

PHONE 295-5022 OUTSIDE LINE 1-800-366-5022

SAFE HARD WATERDESCALER-USE IN

MANY PLACES

431

431

PURPOSE To remove various types of mineral scales including calcium carbonate, calcium phosphate, and calcium sulfate from HVAC systems and other industrial process equipment. Will not attack metal surfaces including galvanized metal like mineral acid descalers. Formulated with completely organic materials. APPLICATION Dilute from 1-5 or 1-10 with water. Maintain pH from 1.5 to 2.5 to remove scale. Thoroughly rinse system with makeup water until pH of the rinse water is the same as the makeup water. CAUTION Strong acid: Wear protective clothing including gloves and eye wear when using. If contact with skin takes place, immediately flush thoroughly with water. If contact with eyes takes place, immediately flush thoroughly with water for 15 minutes then contact physician. STORAGE: Keep away from children. Store away from strong caustics or basic solutions. Keep container closed when not in use. This product is for industrial use only. LYN DISTRIBTUING 965 North Redwood Road, North Salt Lake, Ut. 84054 Phone in Salt Lake Area 801-295-5022 Any Where In The U.S.A. 1-800-366-5022

LD425-S-C INDUSTRIAL DESCALER

432

432

ON-LINEON-LINE INDUSTRIAL DESCALER

PRODUCT DESCRIPTIONOn-line is a combination of dispersing agents and scale inhibitors. It is formulated to remove olddeposits and to prevent the formation of new non-microbiological deposits. It is recommended for usein boilers, cooling water systems, air washers, petroleum secondary recovery systems, and otherindustrial water systems.

PRODUCT DILUTION:Feed at the rate of 16.0 ounces per 1000 gallons of system water. Treat makeup water added to thesystem at the same rate. Maintain the concentration at 20 - 30 ppm in the system for on-linedescaling. At this recommended dosage, this product will not remove deposits so quickly thatsubsequent plugging of tubes or valves will occur. If faster descaling or cleaning is desired,concentrations two to three times higher than those suggested may be used.

PRODUCT CHARACTERISTICS

CAUTION:This product is highly alkaline. Keep out of reach of children. In case of contact flush thoroughly withwater. In case of eye contact, flush thoroughly with water for at least 15 minutes and get medicalattention. Do not take internally. Avoid prolonged breathing of vapors. Use with adequate ventilation.Do not allow to come in contact with acids.

LYN DISTRIBUTING Phone 801-295-5022 outside Salt Lake Area 800-366-5022965 No. Redwood Road No. Salt Lake, Utah 84054

Density @ 25 C .....................Approximate Wt./gal...............Approximate vol./lb.................pH ( 100 ppm in water)...........

1.07 g/ml.8.9 lbs.424 ml.8 - 9

WATERTREATMENTCHEMISTRY

433

433

Armour Plate

Urethane-Fortified Floor Finish

Highly Durable, Easily Maintained, Easily

removed, excellent heel mark resistance.

This product is designed for high-speed and low-speed floor machines. Its combination of acrylic resin fortified with durable urethane provides a long wearing film that responds readily to high speed burnishing as well as low speed polishing. This product provides a clear film, which will not discolor with ageing, and exhibits excellent mark and scuff resistance. It has outstanding detergent and water resistance but can be removed easily with an amine-based stripper like our Free ‘N’ Easy no-rinse stripper. This product is recommended for all resilient tile including asphalt, vinyl, vinyl composition, rubber, linoleum, terrazzo, and other masonry surfaces. It is ideally suited for heavy traffic areas such as supermarkets, shopping malls, restaurants, retail stores and office buildings. Directions: 1. Remove all old wax and/or finish using an amine stripper. Pick up solution with a wet vacuum. 2. Scrub rinse with clear water and allow floor to dry thoroughly. 3. Apply this product with a rayon mop or gravity fed applicator. 4. Allow to dry until “tack free” and apply a second coat. Apply a total of four coats for optimum protection and beauty. Maintenance 1. Dust mop daily with mop treated with a water-based dust mop product. 2. Damp mop as required with a neutral cleaner. 3. Burnish/Polish weekly, or more often if necessary, with a 1500 rpm machine and high speed burnishing pad. 4. When required, a restorer product can be used to enhance the gloss. COVERAGE : 2000 sq. ft./gal. CAUTION: Contains polymer emulsions. Undiluted product may cause eye irritation. Avoid contact with eyes. Do not take internally. FIRST AID: In case of contact, flush eyes with plenty of water for 15 minutes. If irritation persists, see a doctor. KEEP OUT OF REACH OF CHILDREN KEEP FROM FREEZING FOR INDUSTRIAL AND INSTITUTIONAL USE ONLY

Lyn Distributing 965 North Redwood Road North Salt Lake, UT 84054 (801) 295-5022 in Salt Lake City area Outside Salt Lake City area (800) 366-5022

434

434

BASE COAT • Water Emulsion Floor Sealer • Grease and Oil Resistant • High Gloss • Nonflammable • Economical Coverage


For use in schools, hospitals, hotels, motels, churches, and nursing homes.

All purpose acrylic emulsion sealer. White in color, dries crystal clear. May be applied to any floor that emulsion finishes will not harm. Grease and oil resistant. Apply with either wet mop or wax applicator. Gives a high gloss to any floor. Coverage: Up to 2000 square feet per gallon. Ready to use.

Note: This sealer concentrate may be diluted with water prior to application. Surface Preparation: Scrub floors thoroughly with a good detergent or neutral cleaner. If necessary, floor should be stripped free of old wax or finish. Rinse well with clear water and allow floor to dry thoroughly. Application Procedure: Apply a thin, even coat of sealer with a mop or applicator. Allow at least 30 minutes drying time. For badly worn or extremely porous surfaces, apply a second coat of sealer. After sealer is dry and completely cured, floor may be waxed or treated with an acrylic floor finish. Maintenance: Follow label instructions for upkeep on floor finish; this will extend wear and enhance beauty of floor surface.

Description

Areas of Use

Directions

435

435








Stripper

Finish

Floor

Breakdown super concentrated stripper may be diluted 1 part superconcentrate to 3 parts water, this will make regular concentrated wax

stripper. This regular concentrate may be diluted 1 part stripper to 5 – 10parts water. Always adjust the dilution of a wax stripper to level needed




436

436








Stripper

Finish

Floor

Breakdown regular concentrate may be diluted 1 part stripper to 5 – 10parts water. Always adjust the dilution of a wax stripper to level needed




437

437

DIAMOND LUSTER 24-26% solids

• Easy Maintenance • High Traffic • Metal Interlocked Floor Finish • Crosslinked Polymers • Tough, Medium Hard Finish • Excellent in Traffic Areas


This product is ideal for high traffic such as hotels and motels, government offices, hospitals, airports and transportation terminals, county and city schools along with other areas where appearance and beauty are of prime importance.

This high gloss, water emulsion floor finish is formulated using a blend of metal interlocked and crosslinked polymers with short chain polymers for a tough, crystal clear, film which resists repeated detergent cleaning. Will not powder or yellow, easily maintained, will not black mark and does not require buffing to retain its original luster and beauty. This product may be used to protect and finish vinyl, vinyl asbestos, rubber, terrazzo, linoleum, and marble floors. Heavy traffic areas may be recoated to blend invisibly with original coat without restripping entire floor. Highly scrubbable with ordinary cleaners. Strippable with ammoniated or butyl based wax stripper. Mirror-like gloss, detergent resistant, resistant to scuffing, anti-slip. Perfect for high traffic areas. Ready to use.

Prior to application of this product, floor surface should be properly prepared. Strip all old finish or wax from floor and rinse thoroughly with clear water to remove any residue from stripper. Allow floor to dry completely. Apply first coat of product in a thin, even film using a lamb’s wool or synthetic applicator or clean, dry string mop. Allow to dry for at least 20 minutes. Apply second coat in same manner. For maximum beauty and luster, apply a third coat in the same manner. MAINTENANCE: Dust mop daily. Damp mop when required using a solution of 1 part product with three parts water. Pick up dirty solution with mop and wring out. Allow to dry. This procedure may be repeated until stripping and refinishing is required.

Description

Areas of Use

Directions

438

438


NO RINSE FLOORFINISH EMULSIFIER

THE FASTEST STRIPPER TO HITTHE FLOORStrip your floors the new, easy way.Mop it on. Let the chemical do thehard work. No scrubbing. No back-breaking labor. In just minutes,vacuum off your old floor finish. It’sthat simple.

439

439

A new, advanced formula that simplifies floor stripping. Just mop it on. In minutes, it liquefiesyour old floor finish. Use a wet vacuum to remove the old film. No need for floor scrubbers orexpensive stripping pads.

This concentrated, water-based stripper is specially formulated for water emulsion floorfinishes and waxes. It actually re-emulsifies metal cross-linked and other polymers withoutmechanical agitation. It’s perfect for resilient tile, linoleum, terrazzo, quarry tile and concrete.EffectiveStrips the toughest, discolored, built-up floor finishes without expensive equipment.Effectively dissolves unsightly buildup in hard to reach areas and corners. Seldom a need forheavy-duty cove and baseboard strippers. No-foam formulation works quickly and is easilyremovable.

EconomicalAdvanced concentrated formulas for ultimate effectiveness and economy. Simplified methodminimizes labor costs. Eliminates costly use of pads and brushes in normal strippingoperations. Reduces equipment usage and application time. Cuts floor stripping timesubstantially.

Simple to UseThe most simplified method of floor stripping available. Unique two-step process. Eliminatesthe usual labor and time-consuming steps of stripping old, hard-to-remove finish buildup. Nosplashing on walls.

Quick DissolvingRe-emulsification is quick. Old finishes begin to liquefy immediately. Removal isaccomplished in five minutes for most jobs.

Maximizes Finish CoverageGet up to 30% more coverage from floor finishes after using our stripper. Floor porosityremains unaffected because of no machine scrubbing. Creates no blotchy appearance.

Contains No AmmoniaNo irritating ammonia fumes or annoying odor. No need to restrict floor stripping; usable in allareas including hospitals and nursing homes.

Where to UseHospitals •• Airports •• Train Stations •• Laboratories •• Supermarkets •• Restaurants•• Banks •• Office Buildings •• Shopping Malls •• Schools •• Lunchrooms ••Department Stores •• Restrooms •• Kitchens •• Fast Food Chains •• Nursing Homes ••Bus Depots •• Nurseries •• Apartment Buildings

DirectionsThis stripper is concentrated to maximize its effectiveness. The type of finish, number of coats,age of finish and frequency of spray buffing will determine the most effective dilution ratios.Each job will require a different solution strength. A good starting point is one part product to2 parts water. Do not use concentrate full strength; always dilute with water. Before strippingasphalt tile, test solution on small area for color fastness. Apply the solution liberally with astring mop. Wait at least five minutes. Keep the floor wet; do not allow to dry. Use wetvacuum or auto scrubber equipped with squeegee to remove solution. Rinse the floor twicewith warm water. Allow to dry and apply finish. If desired, for large areas, use this productwith rotary or automatic scrubber to remove extremely heavy finish buildup. Increase thedilution to 1:5 or 1:6.

440

440

INSTANT REPLAY Concentrated Spray Buff & Restorer

INSTANT REPLAY was formulated to clean, repair and restore the shine of today’s modern high gloss floor finishes, this solvent emulsion incorporates detergents and polymers to quickly penetrate surface soil while removing black heel marks, scuffs and repairing light scratches. The unique acrylic ethylene copolymer in the product not only restores but enhances the original gloss of your floor finish. Continued use of Instant Replay in a prescribed maintenance program will reduce overall maintenance costs with less frequent stripping and re-coating. BENEFITS: Economical- reduces floor maintenance costs by extending time between stripping floors. May be diluted with up to 10 parts water for normal maintenance. Effective-cleans and shines in one operation, a special blend of detergents, copolymers and solvent provide fast, effective repair of high traffic floors. Versatile-may be used with low to ultra high speed floor equipment to provide optimum appearance. Pleasant-and easy to use. No fumes or lingering solvent odors. Provides excellent slip resistance properties. DIRECTIONS: Sweep large debris and dust mop (preferably with a water based dust mop treatment like “ATTRACK ALL”). For best results, damp mop as needed using a neutral cleaner (NC-183 OR CONQUER). Make sure the floor is dry before beginning the spray buff procedure. Apply diluted product through appropriate dispenser to the width of your pass. Buff as require, remember that the more aggressive the pad the more floor finish will be removed. We suggest using a Hog Hair pad or white super rubberized pad. Dust mop floor to pick up any residue. Clean and store all equipment.

LYN DISTRIBUTING 965 No. Redwood Road No. Salt Lake, Utah 84054 Phone (801)295-5022 Outside Salt Lake Area 1-800-366-5022

441

441

This wax stripper is designed for maximum performance without the noxious ammonia fumes of common strippers. This highly concentrated stripper will remove all types of natural and synthetic finishes, including the detergent resistant, metal interlock acrylic finishes. Ideal for all hospitals, nursing homes, and any other area where ammonia and other noxious fumes may be unacceptable. Directions: Use 6 to 10 ounces per gallon of hot water. Mop on stripper solution and allow to act for 5 to 10 minutes. Pick up the stripper solution and residue, then rinse thoroughly. Heavy build-ups may require scrubbing or stronger solution. Lyn Distributing 965 No. Redwood Road No. Salt Lake, Ut. 84054

LOW ODOR WAX STRIPPER CONCENTRATE FOR FAST EFFORTLESS REMOVAL OF EMULSION

FLOOR FINISHES.

PLEASANT ODOR

EASY TO USE CONTAINS NO AMMONIA

IDEAL FOR HOSPITALS, SCHOOLS,

NURSING HOMES MEDICAL CLINICS

Warning Harmful if swallowed. Avoid contact with eyes and mucous membranes or prolonged contact with skin. Internal - Drink large quantities of water followed with citrus fruit juice. Call physician immediately. Eyes - Flush with plenty of cool water for at least 15 minutes and obtain medical attention. First Aid: External - Flush with water.

442

442

N.C.-183

• Neutral pH Cleaner • Medium Suds • Leaves Protective Film • Non-Flammable • Concentrated • Biodegradable • Pleasant Lime Scent


Industries, schools, restaurants, hospitals, nursing homes, apartments, churches, office buildings and any facility that requires a biodegradable cleaner.

All purpose cold water detergent, 100% biodegradable surfactants with synergized phosphates and wetting agents added. Gives medium suds, and has thin viscosity. This detergent contains a wide range of chemicals for maximum efficiency in attacking all types of dirt and grime on any type of floor. Upon drying, it leaves a protective film for added beauty and slip resistant luster. In addition to use on floors, this detergent is also useful in cleaning walls, counters, woodwork, blinds, porcelain, or any painted or commercially enameled wood or metal surface without harm to hands. The detergent is equally efficient in cold or hot water, and excellent for hard-water areas. In extremely hard water areas, check with your distributor. Dilutes from 1 : 16 to 1 : 64 with water depending on application.

For light cleaning, use 2 to 4 ounces detergent per gallon of water. Mop or sponge the area to be cleaned. Pick up excess fluid, let the area dry, and buff for added luster. For heavy cleaning, use 4 to 8 ounces detergent per gallon of water. Allow the solution to remain on the floor for 5 to 10 minutes, then remove from the floor. For exceptionally dirty floors, use a scrubbing machine or stiff brush. Rinse the surface to remove cleaner.

Description

Areas of Use

Directions

443

443

POLI-CLEAN Detergent Plus Floor Finish

A unique blend of cleaning agents and copolymer floor finish designed for maintenance cleaning and polishing of waxed or finished floors. Does not replace necessary periodic stripping and refinishing of the floor, but does reduce the frequency of major floor cleaning. Cleans and rejuvenates traffic and other high wear areas. Keeps floors at peak appearance and protection at all times with reduced cost of time and materials. Suitable for all types of floor and all types of finishes. Prevents wax build ups and discolored floors. Quick, easy and economical to use. Directions For Use: Mix a solution of 1 part cleaner/finish and 8 parts of warm water. Do not use hot water. Apply solution liberally to soiled areas of entire floor and mop sufficiently to loosen soil. Wring mop in separate bucket and pick up loosened soil. Do not mop floor completely dry, only pick up surplus solution containing soil. Allow to dry. Then polish entire floor to a high gloss. Spray buffing: Mix a solution of 1 part cleaner/finish and 8 parts warm water. Fill spray container with spray solution. Spray and buff until dry. Cleans, shines, and removes black marks in one easy operation. Take advantage of Poli-Clean to cut costs. Cut waxing cost in half, cut labor expense, and keep floors looking great for days longer. LYN DISTRIBUTING 965 No. Redwood Road No. Salt Lake, Ut. Phone (801)295-5022 Out Side Salt Lake Area (800) 366-5022

444

444

Lyn Distributing 965 North Redwood Road North Salt Lake, Utah 94054 Phone in Salt Lake Area 295-5022 Outside Salt Lake Area 1-800-366-5022

445

445

Q. Why should I use insect repellent? A. Insect repellents help people reduce their exposure to mosquito bites that may carry potentially serious viruses such as West Nile virus, and allow them to continue to play and work outdoors. Q. How does the percentage of DEET in a product relate to the amount of protection it gives? A. Based on a recent study: A product containing 23.8% DEET provided an average of 5 hours of protection from mosquito bites. A product containing 20% DEET provided almost 4 hours of protection. A product with 6.65% DEET provided almost 2 hours of protection. Products with 4.75% DEET and 2% soybean oil were both able to provide roughly 1 and a half hour of protection. Q. Why does CDC recommend using DEET? A. DEET is the most effective and best-studied insect repellent available. (Fradin, 1998). Studies using humans and mosquitoes report that only products containing DEET offer long-lasting protection after a single application.(Fradin and Day, 2002.) Q. Are non-DEET repellents effective (e.g. Skin-So-Soft, plant-based repellents)? A. Some non-DEET repellent products which are intended to be applied directly to skin also provide some protection from mosquito bites. However, studies have suggested that other products do not offer the same level of pro-tection, or that protection does not last as long as products containing DEET. A soybean-oil-based product has been shown to provide protection for a period of time similar to a product with a low concentration of DEET (4.75%) Q. Is DEET safe? A. Yes, products containing DEET are very safe when used according to the directions. Because DEET is so widely used, a great deal of testing has been done. When manufacturers seek registration with the U.S. Environmental Protection Agency (EPA) for products such as DEET, laboratory testing regarding both short-term and long-term health effects must be carried out. Over the long history of DEET use, very few confirmed incidents of toxic reactions to DEET have occurred when the product is used properly. The following Questions and Answers are from the Center for Disease Control, Division of Vector-Borne Infectious Diseases, published 10/04/02 Q. Which mosquito repellent works the best? A. The most effective repellents contain DEET (N,N-diethyl-m-toluamide), which is an ingredient used to repel pests like mosquitoes and ticks. DEET has been tested against a variety of biting insects and has been shown to be very effective. The more DEET a repellent contains the longer time it can protect you from mosquito bites. A higher percentage of DEET in a repellent does not mean that your protection is better—just that it will last longer. DEET concentrations higher than 50% do not increase the length of protection. Q. What are some general considerations to remember in order to use products containing DEET safely? A. Always follow the recommendations appearing on the product label. Do not spray aerosol or pump products in enclosed areas. Do not apply aerosol or pump products directly to your face.

Professional Skin Protection for Harsh Conditions Verified avian, animal and mosquito infections during 2002

Indicates human case(s) West Nile Virus in the United States, 2002

Insect Repellant wipes from: Lyn Distributing 1-800-366-5022

Fax 1-801-292-6196 Packaging: 100 per case or 300 per case

446

446

PRODUCT DISCRIPTION: A multi purpose, non-selective weed and grass killer concentrate that when diluted according to label directions (1:21 to 1:42 with water) KILLS THE COMPLETE PLANT from the top of the plant to the root, BUT DOES NOT STERILIZE THE SOIL.

ACTIVE INGREDIENTS: Active Ingredients: Glyphosate, N-(phosphonomethyl) glycine, in the form of its isopropylamine salt 18.0% Inert Ingredients: 82.0% 100.0% DILUTION: (1:21 – 1:42 with water) see label for specific use directions.

DISCUSSION: GLYPHO-KILL CONCENTRATE is a high concentrate non-selective grass and weed killer which, when absorbed systemically by contacted foliage, is carried throughout the stems and roots to give complete kill of tough annual and perennial grasses and broadleaf Plants – roots and all. Because it will not injure desirable plants as long as the spray does not come into contact with said plant. GLYPHO-KILL CONCENTRATE is a water based formula with non residual remaining in the soil – a very environmentally safe product. GLYPHO-KILL CONCENTRATE when diluted according to directions, 1 to 2 gallons will normally cover 1,000 square feet of turf to control plant growth around buildings, signs, utility poles, gardens, walk-ways, patios, beneath benches, along fence lines, golf courses, driveways, ditches and other non-crop areas.

TYPICAL PRODUCT DATA: (not to be considered as specifications) Appearance: Clear, viscous, amber-colored liquid, odorless to a slight Amine-like odor. Density: 1.07 g/ml (8.91 lb/gal) Flash Point: None Water Solubility: Complete Viscosity: 25-30 mm/Hg pH (as is): 5.0 – 6.0 pH (use solution): 6.0 – 8.0 NORMAL PACKAGING: 5 and 6 gallon pails, 20, 35 and 55 gallon drums

SOLD BY LYN Distributing 965 North Redwood Road No. Salt Lake, Utah 84054 Phone From Any Where In The U.S.A. 1-800-366-5022 In Salt Lake Area 295-5022

447

447

DISCRIPTION: This liquid weed killer is composed of bromacil in a phytoxic oil. The oil carrier combines the properties of low volatility with rapid penetration and translocation in the plant. The insolubility of the herbicide in water assures full effect regardless of rainfall after application or stage of vegetation. Translocation and root absorption of component herbicides procedure extensive root kill of weeds and provide long term residual control. As a soil sterilant type herbicide, the active ingredients will remain in the soil up to a full growing season, thereby prohibiting the growth or re-growth of weeds and other undesirable foliage. Dilution is 1 to 10. Coverage is 1000 to 2000 square feet per gallon of product. (Note: It is a violation of federal law to use this product in a manner inconsistent with its labeling. See product label copy for specific information.) WHERE TO USE: Non-cropland, areas such as loading ramps, fence rows, railroad sidings, storage yards, parking lots, around buildings and industrial plant sites.

WARNING: May be fatal if swallowed, inhaled or absorbed through the skin. Avoid contact with eyes, skin and clothing. Avoid breathing vapors or spray mist. Keep away from food, foodstuff and domestic water supplies. This concentrate is toxic to fish and wildlife. Do not apply directly to water. Do not contaminate water when disposing of equipment wash waters. Apply only as specified on this label. IF SWALLOWED: Drink a large amount of milk or water. Do not induce vomiting because of aspiration hazard. CALL A PHYSICAN IMMEDIATELY. IF IN EYES: Flush with plenty of water. See a physician immediately. IF ON SKIN: Remove contaminated clothing and wash affected area with soap and water. IF INHALED: Remove victim to fresh air. Apply artificial respiration if indicated. KEEP OUT OF THE REACH OF CHILDREN. CONTAINER DISPOSAL: See product label copy for specific information.

SPILL OR LEAKAGE PROCEDURES: Contain spill. Do not contaminate sewers, ground waters or surface waters. Soak up with inert absorbent material & place into properly labeled & sealed non-leaking containers for disposal in authorized manner as hazardous waste.

EPA Reg. No: 10807 – 144 Active Ingredients: Bromacil: 2.3% Inert Ingredients: 97.7% Color: Brown Odor: Aromatic Solvent Flash Point: 155 degrees F Lbs./gal.: 8.16 Shelf Life: One year in sealed container

LYN DISTRIBUTING 965 NO. REDWOOD ROAD, NO. SALT LAKE, UT. 84054 PHONE 801-295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

PRODUCT SPECIFICATIONS:

NON SELECTIVE WEED KILLER & SEMI-SOIL STERILANT

448

448

TECHNICAL DATA SHEET

Product Name : Fog Kill Oil Base Insecticide Description : A heavy oil based formula designed for use in thermal foggers that can deliver spray particle sizes within the aerosol size range. This product is a synthetic pyrethroid formula and is ideal for outdoor applications as well as indoors. (Note: It is a violation of federal law to use this product in a manner inconsistent with its labeling. See product label copy for specific information.) Where to Use : For control of flies, mosquitoes and gnats in warehouses, restaurants and industrial institutions. Also for reduction in annoyance from flies, mosquitoes and gnats in backyards, patios, around swimming pools, and horse stables. CAUTION: Harmful if swallowed, inhaled, or absorbed through skin. Avoid breathing vapors or spray mist. Avoid contact with skin and eyes. Avoid direct exposure to fog. Wash contaminated clothing prior to reuse. Do not contaminate food or feed. In food processing plants use only when plant is not in operation. Foodstuff should be removed or covered during treatment. Food processing surfaces and equipment must be covered during treatment, or cleaned with a detergent and rinsed with potable water before use. This pesticide is highly toxic to fish. Do not apply directly to water, to areas where surface water is present, or to inter tidal areas below the mean high water mark. Drift and runoff from treated sites may be hazardous to fish in adjacent waters. Do not contaminate water when disposing of equipment washwaters. This formula is combustible. Keep container sealed. Do not use, pour, spill or store near heat or open flame. IF SWALLOWED: Call a physician or Poison Control Center immediately. Gastric lavage is indicated if material is taken internally. Do not induce vomiting as this may cause aspiration pneumonia. IF INHALED: Remove victim to fresh air. Apply artificial respiration if required. FOR SKIN: Remove contaminated clothing and wash affected areas with soap and water. FOR EYES: Flush eyes with plenty of water. Get medical attention if irritation persists. KEEP OUT OF REACH OF CHILDREN. Container Disposal : See product label copy for specific information. Spill Or Leakage Procedures : Contain spill. Keep out of surface waters & any sewers or water courses entering or leading to surface waters. Soak up with inert absorbent & place in properly labeled leak-proof containers for disposal. Product Specifications: EPA Reg. No: 10807-107 Active Ingredients : Resmethrin: 0.20% Inert Ingredients : (Contains Petroleum Distillates ) 99.80% USDA: F1 Color: Colorless Odor: Hydrocarbon/trace of lemon Flash Point: 111ºF TCC Lbs./gal.: 6.55 Shelf Life: One year in sealed container HMIS RATING: Health-2; Flammability-2; Reactivity-0; Personal Protection-B. 09/94

449

449

PRECAUTIONARY STATEMENTS: HAZARDS TO HUMANS AND DOMESTICANIMALS

CAUTION: Harmful if swallowed. Avoid breathing vapors or spray mist. Wear a pesticide respiratorjointly approved by the Mining Enforcement and Safety Administration and the National Institute forOccupational Safety and Health under the provisions of 30 CFR Part II. Contains petroleumdistillate. If swallowed, do not induce vomiting. Get immediate medical attention. Avoid contactwith skin and eyes, In case of contact, immediately flush eyes or skin with plenty of water. Obtainmedical attention if irritation persists.Do not apply directly to food. Do not apply space spray while food processing is underway. Coveror remove all food processing surfaces. Thoroughly wash all food processing surfaces beforere-use. After spraying in meat packing plants, bakeries and the food processing plants, wash withpotable water all equipment, benches, shelving, etc., where exposed food will be handled.When using in animal housing areas, do not apply directly to food, water or feed supplements. Donot apply directly to animals. Wash teats of dairy animals before milking. Remove pets, birds, andcover fish aquariums before spraying. Physical Hazards: Do not store near heat or open flame.DIRECTIONS FOR USE: It is a violation of Federal law to use this product in a manner inconsistentwith its labeling.

STORAGE and DISPOSALProhibitions: Do not contaminate water, food, or feed by storage or disposal. Open dumping isprohibited.Pesticide Disposal: Pesticide spray mixture or rinse water that cannot be used according to labelinstructions must be disposed of according to applicable Federal, State and local procedures.Container Disposal: Triple rinse (or equivalent), then offer for recycling or reconditioning orpuncture and dispose of in a sanitary landfill, or by other approved State and local procedures.General: This concentrate is designed for use undiluted in mechanical sprayers such as the LECOMini-ULV or Micro-Gen Micro Generator which gives particles of aerosol size. It can be diluted withrefined kerosene’s, which meet Food Additive Regulation 121.1182 and applied in foggingequipment such as the Microsol or Challenger machines that give larger than aerosol particle size.It can also be diluted with the oil specified above and applied as a contact spray to kill crawlinginsects shown later on this label.Note: When used in hospitals, patients should be removed prior to treatment. Ventilate for twohours after treatment. Do not return patients to room until after ventilation.

General PurposeFlying Insect Killer,

.3PACTIVE INGREDIENTS:Pyrethrins……………………………………..0.30%*Piperonyl Butoxide technical………………1.50%Petroleum distillate…………………………98.20%


ONLY FOR SALE TO USE AND STORAGE BY SERVICE PERSONSEPA. REG. NO. 10807-88 EPA EST. NO. 10807-GA-1 / 10807-TX-1

450

450

For use In Homes, Restaurants, Food Processing Plants and Other Industrial Areas:Space Spray Undiluted: To kill Houseflies, Mosquitoes, Gnats and Small Flying Moths: Closeroom and shut off all air conditioning or ventilating equipment. Using a cold fog generator, apply atthe rate of 5 ounces per 1,000 cubic feet of space. Direct output from aerosol generator upwardtoward corners of room and ceiling. Leave room closed for ½ hour. Ventilate room thoroughlybefore re-entry. Repeat as necessary.Space Spray- Diluted for Ordinary Mechanical Fogging Equipment- to kill Files, Mosquitoes,Small Flying Moths and Gnats: Cover or remove exposed food and food handling surfaces. Closeroom and shut off all air conditioning or ventilating equipment. Dilute concentrate with oil at the rateof 1 part concentrate plus 2 parts of oil and mix well. Apply at the rate of 50-fl. oz. of dilute spray (.4gal.) per 25,000 cubic feet of space. Direct fog upward towards upper corners of room and ceilingarea. Leave room closed for ½ hour. Do not remain in treated areas. Ventilate room thoroughlybefore re-entry.Contact Spray-Diluted for use with Sprayers that give large wetting spray particles to killCockroaches and accessible stages of Granary Insects: Granary Weevils, Rice Weevils,Confused Flour Beetles, Rusty Grain Beetles, Red Flour Beetles, Indian Meal Moth Larvaeand Adults, Cadelles, Grain Miles and Sawtoothed Grain Beetles: Cover or remove exposedfood and close room as described above, Dilute concentrate with oil at the rate of 1 partconcentrate plus 2 parts of oil and mix well. Spray outside walls of grain bins, flooring, about baseof milling machinery, walls and baseboards, areas behind cabinets, around pipes and other insectharborages using 1 gallon of spray per 1,000 square feet of surface. Force spray into all cracks andcrevices. Repeat applications as necessary.For use In Dairy and Beef Barns, Swine Housing, Poultry Houses and Horse Barns:Space Spray-Undiluted for use in aerosol generators to kill Files, Mosquitoes, Gnats, SmallFlying Moths and Exposed Cockroaches: Cover or remove exposed food and watering troughsand close house as tightly as possible. Apply as a fine mist over the livestock in stanchions orholding pens or over the poultry in cages or pens. Use a fogger or mist generator so spray isdirected and applied above the animals and direct spray to center of the area where animals arehoused. Apply 2 ounces per 1,000 cubic feet so that spray mist is distributed uniformly throughoutthe entire area sprayed. Do not ventilate the area for at least 30 minutes after spray has beenapplied. If used in dairy barn, aerate the barn thoroughly before milking. Repeat daily, morning andafternoon, or as required. Keep sprayer unit reservoir and nozzle clean to insure proper delivery ofspray mist or fog.Space Spray-Diluted for Ordinary Mechanical Fogging Equipment to kill Files, Mosquitoes,Small Flying Moths and Gnats: Prepare for application as above. Dilute concentrate with refinedkerosene at the rate of 1 part concentrate plus 2 parts of refined kerosene and mix well. Apply atthe rate of 50-fl. oz. dilute spray (.4 gal.) per 25,000cubic feet of space above animals. Direct fogupward toward corners of room and ceiling. Ventilate room and leave closed for ½ hour.

LYN DISTRIBUTING 965 No. Redwood Rd. No. Salt Lake, Ut. 84054Phone 295-5022 Outside Salt Lake Area 800-366-5022

SERVICE REPS ALL AROUND THE U.S.A. BOISE, CHICAGO, DENVER, DALLAS, HOUSTON, LOS ANGLES, SACRAMENTO, SALT LAKE CITY, TAMPA, PORTLAND.

451

451

PRECAUTIONARY STATEMENTS Hazards to Humans and Domestic Animals

CAUTION May cause irritation of skin, eyes, nose, and throat. Avoid contact with skin, eyes and clothing. Avoid breathing dust. Wash thoroughly after handling.

ENVIRONMENTAL HAZARDS Keep out of lakes, streams, or ponds. Do not apply on or near valuable woody or herbaceous plants or on areas where their roots may extend, because of possible injury to such plants. Thoroughly clean spreading equipment with a suitable chemical cleaner before using for other purposes (or do not use same spreading equipment for other purpose).

DIRECTIONS FOR USE

GENERAL CLASSIFICATION It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

STORAGE AND DISPOSAL Do not contaminate water, food, or feed by storage, disposal, or cleaning of equipment. STORAGE: Store in dry area. Keep inner liner closed when not in use. Do not store near food, feed, seed, or fertilizer. PESTICIDE: Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility. CONTAINER DISPOSAL: Completely empty liner by shaking and tapping sides and bottom to loosen clinging particles. Empty residue into application equipment. Then dispose of liner and drum in a sanitary landfill or by incineration if allowed by State and local authorities.

NET CONTENTS: NET WEIGHT: ________

GRANULAR WEED CONTROL

NON-SELECTIVE HERBICIDE FOR CONTROLLING A WIDE RANGE OF

ANNUAL AND PERENNIAL WEEDS AND GRASSES.

FOR USE ON NON-CROPLAND AREAS SUCH AS FENCE ROWS, STORAGE YARDS,

AND INDUSTRIAL AREAS.

ACTIVEINGREDIENTS: Bromacil (5-bromo-3-sec-butyl-6-methyluracil)………4.0% INERT INGREDIENTS..............…………..96.0% TOTAL ................................ ..............………….100.0%

EPA REG. NO. 8123-74-50569 EPA EST. NO. 8123-IL-1 KEEP OUT OF REACH OF CHILDREN Read Side Panel For Additional Cautions

CAUTION STATEMENT OF PRACTICAL TREATMENT IF IN EYES: Flush with water for 15 minutes and obtain medical attention. IF ON SKIN: Wash skin with soap and water. IF SWALLOWED: Call physician or poison control immediately. See side panel for additional precautionary statement.

SOLD BY:

I

G-TWK WEED CONTROL is a non-selective herbicide for controlling a wide range of annual and perennial weeds and grasses. It is recommended only for non-cropland areas, such as railroad rights-of-way and industrial areas. The application of 200 to 400 pounds of this product per acre usually results in a nonproductive condition of the soil for a period of a year or more. The duration of non-productivity is dependent upon rainfall, type of soil and other conditions.

DIRECTIONS: Apply product as furnished using a seed spreader, fertilizer spreader, shaker type applicator or any equipment which will distribute this product uniformly over the area to be treated.

To control annual and most perennial weeds and grasses, apply at the rate of 200 to 400 pounds per acre; on smaller plots, 0.5# to 1# pound per 100 square feet. Repeat spot treatment may be required when deep rooted perennial weeds are present. To obtain best results, apply to the ground where it will be absorbed by the roots. Applications early in the season have been found to give results superior to applications made later in the season. This product may, however, be applied at any time of the year. Maximum effectiveness in arid regions is obtained when applied just prior to the rainy season. Users should consult State Agricultural Experimental Stations or Extension Service Weed specialists for recommendations as to use of this product in their particular area. IMPORTANT: Do not apply on or near valuable woody or herbaceous plants or in areas where their roots may extend, because of possible injury to such plants. Thoroughly clean spreading equipment with a suitable chemical cleaner before using for other purposes (or do not use same spreading equipment for other purposes).

G-T.W.K.

VK-44

LYN DISTRIBUTING CO. POST OFFICE BOX 208 LAYTON, UTAH 84041

NOTICE Seller makes no warranty, expressed or implied, concerning the use of this product other than indicated on the label. Buyer assumes all risk of use/or handling of this material when use and/or handling is contrary to label

452

452

DIRECTIONS FOR USE

It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.

CAUTIONS May cause skin irritation. Harmful if swallowed. Avoid contact with eyes, skin or clothing. Avoid inhaling spray mist. Do not use on light sandy soils. Do NOT store with foodstuffs. This product will kill or seriously injure many desirable forms of vegetation. Do not apply directly to flowers, fruits, vegetables, grapes, ornamentals, cotton or other desirable plants. Do not use when there is hazard from drifting mists. (Coarse sprays are less likely to drift). Vapors from this product may injure susceptible plants in the immediate vicinity. Avoid contamination of water used for domestic purposes and irrigation purposes. Excessive amounts of this product in the soil may temporarily inhibit seed germination and plant growth. Keep out of lakes, streams or ponds. Do not contaminate water by cleaning of equipment or disposal of wastes. Avoid contamination of feed and foodstuffs.

S.W.C.C.

AMINE SELECTIVE WEED CONTROL

For control of broadleaf weeds in turf, golf courses, park grounds and similar non-crop turf areas.

ACTIVE INGREDIENTS: * Dimethylamine salt of 2, 4-dichlorophenoxyacetic acid 12.6% INERT INGREDIENTS: 87.4% TOTAL 100.0% *Equivalent to 10. 5% 2,4-Dichlorophenoxyacetic acid, or . 91 lbs. 2,4-D acid per gallon. Isomer specific by AOAC Method No. 6-D01-5

CAUTION: KEEP OUT OF THE REACH OF CHILDREN SEE ADDITIONAL PRECAUTIONS ON SIDE PANELS

CONTROLS THESE TURF WEEDS:

BUCK HORN PLANTAINS

CURLED DOCK DANDELION RED SORREL

WILD GARLIC WILD ONION

MANY OTHERS

DIRECTIONS FOR USE Use 4 to 5 quarts per acre (3 to 5 ounces in 1 – 2 gallons water, per 1,000 sq. ft.) in sufficient water for uniform spray coverage. Repeat applications may be necessary. Use lower rate for easy-to-kill species, i.e. dandelion and plantains. Use higher rate for more effective general control of weeds. Use preferably in the spring or fall when weeds are actively growing. The killing action is more rapid when applied on warm clear sunny days than when weather is cool, cloudy or wet. NOTE: Do not use on newly seeded lawns. Do not mow turf for several days before or after treatment in some areas Dichondra, clover, bent grasses, carpet buffalo, and St -Augustine grasses may be injured.

SOLD BY

LYN DISTRIBUTING P.O. BOX 208

LAYTON, UTAH 84041

CAUTIONS Spray equipment used in applying this product should be thoroughly cleaned before using for any other purposes. Use repeated flushing with soap and warm water or suitable chemical cleaner. It is best to use a separate sprayer for application of insecticides and fungicides.

NOTICE

Follow directions carefully. Timing and method of application, weather and crop conditions, mixtures with other chemicals not specifically recommended, and other influencing factors in the use of this product are beyond the control of the seller. Buyer assumes all risks of use, storage or handling of this material not in strict accordance with directions given herewith. Do NOT store with foodstuffs.

ONLY FOR SALE TO, USE, AND STORAGE BY SERVICEPERSONS.

E.P.A. REG. NO-8123-56 –50569 EPA EST. NO. 8123-IL-1

NET CONTENTS:_____________________________

LSK-11 ( 5 / 84)

STORAGE AND DISPOSAL Do not contaminate water, food, or feed by storage or disposal. STORAGE: Do not stack more than four drums high. Leaking or damaged drums should be placed in over-pack drums for disposal. Spills should be absorbed in sawdust or sand and disposed of in a sanitary landfill. Keep container closed when not in use. Do not store neat fertilizers, seeds, insecticides, or fungicides. PESTICIDE DISPOSAL: Pesticide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of Federal Law. If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide of Environmental Control Agency, or the Hazardous Waste representative at your EPA Regional Office for guidance. CONTAINER DISPOSAL: Triple rinse (or equivalent). Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill, of by other procedures approved by state and local authorities.

453

453

DIRECTIONS FOR USE It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Uniformly spray one gallon of Emulsifiable Vegetation Killer Concentrate mixed in ten gallons of water over 1,250 sq. ft. of soil surface. Thoroughly wet all foliage to insure contact action. Best results are obtained when applications are made during or soon after weed emergence while growth is active. Where vegetation is tall and dense, use 1 ½ gallons of Emulsifiable Vegetation Killer Concentrate in ten gallons of water per 1,250 sq. ft. for control of hard -to-kill perennial weeds and grasses such as Johnson grass, Bindweed, and Wild Carrot, use 3-4 ½ gallons per 1,250 sq. ft. Although Emulsifiable Vegetation Killer Concentrate has considerable activity through the roots and therefore, adequate rainfall to move the chemical into the root zone is necessary. Under conditions where the rainfall is high and the growing season long, a second application may be necessary to maintain a weed-free soil surface. Care must be taken to keep this herbicide away from desirable flower beds, lawns, and shrubs. Do not apply over roots of valuable trees, or woody ornamental plants. Only apply herbicide outside of the drip line of t rees. Avoid spray drift to desirable plants.

T.W.K. I I

EMULSIFIABLE VEGETATION

KILLER CONCENTRATE ACTIVE INGREDIENTS: Prometon (2,4-Bis(isopropylamino)-6- Methoxy -s -triazine) 4.66% Petroleum Distillate 77.35% INERT INGREDIENTS: 17.99% TOTAL 100.00%

EPA REG. NO. 8123-71-50569 EPA EST. NO. 8123-IL-1

SCIENTIFICALLY FORMULATED FOR

INDUSTRIAL and INSTITUTIONAL USE

CAUTION: KEEP OUT OF REACH OF CHILDREN CONTAINS

PETROLEUM DISTILLATES HARMFUL OR FATAL IF SWALLOWED

Read side panel for additional cautions and directions

SOLD BY

LYN DISTRIBUTING P.O. BOX 208

LAYTON, UTAH 84041

This emulsifiable concentrate provides effective non-selective weed control on non-cropland areas such as parking lots, fence rows, railroad sidings, dra inage ditch banks, and around buildings or industrial sites where bare ground is desired, a wide variety of annual and perennial weeds and grasses are controlled on the above sites. IMPORTANT: Read the entire Directions for Use and the Conditions of Sale and Warranty before using this product.

NOTICE Since weather and other conditions under which this product may be used will vary, the Seller makes no warranty of any kind, expressed or implied, concerning the use of this product. The user assumes all risks of use or handling not in accordance with directions or suggestions. NET CONTENTS:_________________________________________ BATCH NO.:____________________________________________

LVK-101 ( 10 / 84 )

STORAGE AND DISPOSAL Do not contaminate water, food, or feed by storage or disposal. STORAGE: Do not expose to extreme temperatures. Do not stack more than five drums high. Drums should be opened in well-ventilated areas. Leaking or damaged drums should be placed in over-pack drums for disposal. Spills should be absorbed in sawdust or sand and disposed of in a sanitary landfill. Keep container closed when not in use. Do not store near fertilizers, seeds, insecticides, or fungicides. Store at temperature above 32 degre es F. PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility. CONTAINER DISPOSAL: Triple rinse or equivalent. Then offer for recycling or reconditioning, or puncture and d ispose of in a sanitary landfill, or by other procedures approved by state and local authorities.

PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS

CAUTION Keep out of reach of children. Harmful if swallowed. If swallowed, do not induce vomiting. Call a physician immediately. Avoid contact with eyes and skin. In case of skin contact, wash with soap and water. Avoid inhalation of sprat mists.

ENVIRONMENTAL HAZARDS Do not apply directly to water. Do not contaminate water by cleaning of equipment or disposal of wastes. Avoid contamination of food and feed. Do not contaminate water used for irrigation or domestic purposes. Apply this product only as specified on this label.

PHYSICAL OR CHEMICAL HAZARDS Do not use, pour, spill or store near heat or open flame.

454

454

GENERAL INFORMATIONThis product is a specially formulated non-selective

vegetation killer for controlling a wide range of annual andperennial weeds and grasses. Apply undiluted as a spray

on non-cropland areas where bare ground is desired.Control will very with the amount of chemical applied, soiltype, rainfall and other conditions. This product is non-corrosive to metal surfaces. Especially compounded for

industrial and municipal weed control.

T. W. K.WEED KILLER AND

SEMI-SOIL STERILANT

ACTIVE INGREDIENTS: Petroleum Solvent 95.83% 2, 4-Dichlorophenoxyacetic acid, Isoctyl ester* 1.09% Bromacil ( 5-bromo-3-sec-butyl-6-methyluracil) .98%INERT INGREDIENTS: 2.10% TOTAL 100.00%

*2, 4-Dichlorlphenoxyacetic acid equiv. .70%

EPA REG. NO. 8123-29-50569EPA EST. NO. 8123-IL-1

SCIENTIFICALLY FORMULATED FORINDUSTRIAL AND INSTITUTIONAL USE

CAUTION:KEEP OUT OF REACH OF CHILDREN

CONTAINS PETROLEUM DISTILLATESHARMFUL OR FATAL IF SWALLOWED

Read side panel for additional cautions and directions

EXCLUSIVELY SOLD BY

LYN DISTRIBUTING CO.P.O. BOX 208

LAYTON, UTAH 84041

DIRECTIONS FOR USE

It is a violation of Federal Law to use this product in amanner inconsistent with its labeling.

GENERAL WEED CONTROL: To control most weeds onnon-cropland areas such ad parking lots, fence rows,railroad sidings and storage yards, spray at the rate of 1 to 2gallons for each 1,000 square feet.

This product may be applied at any time of the year,EXCEPT when ground is frozen. Best results are obtainedafter vegetation has emerged, In late spring or earlysummer. Use power sprayers, compressed air handsprayers, or an ordinary sprinkling can. No dilution oragitation is required.

NET CONTENTS:_________________

Batch No.________________________

LVK-88 ( 5/95)

PRECAUTIONARY STATEMENTSHAZARDS TO HUMANS

CAUTIONHARMFUL OR FATAL IF SWALLOWEDCONTAINS PETROLEUM DISTILLATES

CALL PHYSICIAN IMMEDIATELYMay cause irritation of eyes, nose, throat and skin.If swallowed, do not induce vomiting. Immediately drinkegg whites, milk, or gelatin solution. Call physicianimmediately. Avoid breathing vapor or mist when sprayingthis product. Avoid contact with skin, wash with soap andwater. In case of contact with eyes, Immediately flushwith large amounts of water, and get medical attention.Remove and wash contaminated clothing with goodlaundry detergent before reuse.

Apply the product only as specified on this label. Do notapply when weather conditions favor drift from areastreated.

ENVIRONMENTAL HAZARDSThis product is toxic to fish and wildlife. Do notcontaminate water by cleaning of equipment or disposal ofwaste. Do not apply on or near desirable trees, shrubs,grassed, or other plants, or on areas where roots ofdesirable vegetation may extend. Do not contaminateirrigation or domestic water supplies. Thoroughly cleanapplication equipment with some geed detergent aftereach use.

Vapors from this product may injure susceptible plants inthe immediate vicinity.

Coarse sprays are less likely to drift.

Avoid spray drift to susceptible plants, as this product mayinjure cotton, beans, peas, grapes, ornamentals, etc.

PHYSICAL OR CHEMICAL HAZARDSDo not use or store near heat or open flame.

STORAGE AND DISPOSAL

Do not contaminate water, food, or feed by storage or disposal.STORAGE: Do not expose to extreme temperatures. Do notstack more than five drums high. Drums should be opened inwell ventilated areas. Leaking or damaged drums should beplaced in over pack drums for disposal. Spills should beabsorbed in sawdust or sand and disposed of in a sanitarylandfill. Keep container closed when not in use. Do not storenear fertilizers, seeds insecticides or fungicides.PESTICIDE DISPOSAL: Pesticide wastes are toxic.Improper disposal of excess pesticide spray mixture, or rinsateis a violation of Federal Law. If these wastes cannot bedisposed of by use according to label instructions, contact yourState Pesticide or Environmental Control Agency, or theHazardous Waste representative at your EPA Regional Officefor guidance.CONTAINER DISPOSAL: Triple rinse ( or equivalent).Then offer for recycling or reconditioning, or puncture anddispose of in a sanitary landfill, or by other proceduresapproved by state and local authorities.

455

455

PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS

WARNING HARMFUL OR FATAL IF SWALLOWED. CAUSES EYE-

IRRITATION MAY IRRITATE NOSE, THROAT, AND SKIN.

Do not get in eyes. Avoid contact with skin and clothing. Avoid breathing spray mist.

Keep away from heat and open flame. Wash thoroughly after handling. In case of contact, flush eyes or skin with plenty of water, for eyes, get

medical attention. ENVIRONMENTAL HAZARDS

Do not apply directly to any body of water. Do not contaminate water by cleaning of equipment or disposal of wastes. Do not use water from

treated ditches for irrigation.

KEEP OUT OF REACH OF CHILDREN WARNING

See side panel for additional precautionary statements.

NET CONTENTS:____ GALLONS_

STORAGE AND DISPOSAL Do not contaminate water, food, or feed by storage or disposal. STORAGE: Do not stack more than four drums high. Leaking or damaged drums should be placed in over pack drums for disposal. Spills should be absorbed in sawdust or sand and disposal of in a sanitary landfill. Keep container closed when not in use. Do not store near fertilizers, seeds, insecticides, or fungicides. PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of on site or a an approved waste disposal facility. CONTAINER DISPOSAL: Triple rinse (or equivalent). Then offer for recycling or reconditioning or puncture and dispose of in a sanitary landfill, or by other procedures approved by state and local authorities.

NOTICE OF WARRANTY This product conforms to the chemical description on the label hereof and is reasonably fit for purposes stated on such label only when used in accordance with directions under normal use conditions. It is impossible to eliminate all risks inherently associated with use of this product. Ineffectiveness or other unintended consequences may result because of such factors as weather conditions, presence of other materials, or the manner or use or application, all of which are beyond the control of seller. In so case shall seller be liable for consequential, special or indirect damages resulting from the use or handling of this product. All such risks shall be assumed by the buyer. SELLER MAKES NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY EXCEPT AS STATED ABOVE.

This product after mixing in water, is non-volatile, non-flammable, and non-corrosive to metals except aluminum. Do not use with aluminum spray nozzles.

DIRECTIONS Apply this product before or during the period of active growth of plants to be controlled when rainfall can be expected for soil activation. If dense growth is present results will be improved if vegetation is removed before treatment. Do not apply when ground is frozen. Before spraying calibrate equipment to determine quantity of water necessary to uniformly cover measured area to be treated. Measure the proper amount of this product and mix into the necessary volume of water. After this product has been thoroughly mixed in the spray tank, agitation of the spray solution in not required. Use a fixed boom power sprayer properly calibrated to a constant speed and rate of delivery. For application with a hand gun sprayer, use at least 200 gallons of spray per acre. For treatment in small areas, a tank type hand sprayer or sprinkling can may be used. For basal (soil) treatment of brush, this product may be applied undiluted with an exact delivery hand gun applicator. WEED CONTROL: To control most weeds for an extended period of time on non-cropland areas such as RAILROAD, HIGHWAY AND PIPELINE RIGHT OF WAYS, PETROLEUM TANK FARMS, LUMBERYARDS, STORAGE AREAS, and INDUSTRIAL PLANT SITES. Apply 12 to 24 gals. This product per acre to control annual weeds and grasses such as foxtail, ryegrass, wild oats, crabgrass,

TWK-120 NON-SELECTIVE

WEED KILLER WATER DILUTABLE LIQUID

IMPORTANT- Injury to or loss of desirable trees or other plants may result from failure to observe the followings. Do not apply, or drain or flush equipment on or near desirable trees or other plants or on areas where the chemical may be washed or moved into contact with their roots. Do not use on lawns, walks, driveways, tennis courts, or similar areas. Prevent drift of spray to desirable plants. Do not contaminate domestic waters. Keep from contact with fertilizers, insecticides, fungicides, and seeds. Thoroughly clean all traces of this product from application equipment immediately after use., Flush tank, pump, hoses, and boom with several changes of water after removing nozzle tips and screens (Clean these parts separately). GENERAL INFORMATION: This product is an effective general herbicide for use on non-cropland areas for control of brush and many annual and perennial weeds, and is particularly useful for control of perennial grasses. It is a water soluble liquid to be mixed in water and applied as a spray. It may also be applied undiluted for basal (soil) treatment of brush. Effects are slow to appear and may not become apparent until the chemical has been carried into the root zone of the weeds by moisture. The degree of control and duration of effect will vary with amount of chemical applied, soil type, rainfall, and other conditions.

SOLD BY

LYN DISTRIBUTING P.O. BOX 208 LAYTON, UTAH 84041

E.P.A. REG. NO. 8123-96-50569 E.P.A. EST. NO. 8123-IL-1

Active ingredients: Lithium Salt of Bromacil (5-bromo-3-sec-butyl-6-methyluracil)……………………………..2.75% Inert ingredients;……………………….97.25% 100.00% This product contains 0.25lbs. of bromacil per gallon DIRECTIONS FOR USE

It is a violation of Federal law to use this product in a manner in consistent with its labeling.

456

456

DESCRIPTION: A non-selective concentrated herbicide that can be applied for post-emergent or pre-emergent weed control. This product is dilutable at the rate of one part product to 10 parts oil or water. This product is water emulsifiable and non-corrosive to equipment. When diluted with oil, this product functions as a desiccant when applied to live vegetation. This ability to dehydrate the plant causes a quick top kill within 24 hours. In addition to an effective top kill, the treatment will be absorbed through the roots to give complete root kill. The effect will last up to a full season. This allows for the product to be used for the product to be used for spot treatment as well as for large area coverage. As a soil sterilant herbicide, the active ingredients will remain in the soil up to a full growing season, thereby prohibiting the growth or re-growth of weeds and other undesirable foliage. Coverage is 650 to 1000 square feet per gallon of product. See label copy for dilutions. (Note: It is a violation of federal law to use this product in a manner inconsistent with its labeling. See product label copy for specific information.)

WHERE TO USE: This non-selective herbicide that con be applied for post emergence or pre-emergence weed control. It is recommended that this product be used in areas such as industrial sites, around buildings, roadways, right-of-way, lumber yards, tank farms, cemeteries, driveways, parking lots, fence areas, recreational areas and airports.

WARNING - May be fatal if swallowed or absorbed through the skin. Do not breathe vapors or spray mist. Do not get in eyes, on skin or on clothing. Causes eye and skin irritation. In case of contact immediately flush eyes or skin with plenty of water. Get medical attention if irritation persists. This product is toxic to wildlife and fish. For terrestrial uses, do not apply directly to water, or to areas where surface water is present or to inter-tidal areas below the mean high water mark. Do not contaminate water when disposing of equipment wash waters. Do not use or store neat heat or open flame. IF SWALLOWED: Drink a large amount of milk or water. Do not induce vomiting because of aspiration hazard. CALL A PHYSICIAN IMMEDIATELY. If patient experiences difficulty in breathing, start mouth-to-mouth artificial respiration or administer oxygen. IF INHALED: Remove victim to fresh air. Apply artificial respiration if indicated. IF ON SKIN: Wash immediately with soap and water. IF IN EYES: Flush with plenty of water. SEE A PHYSICIAN IMMEDIATELY. KEEP OUT OF REACH OF CHILDREN. CONTAINER DISPOSAL: See product label copy for specific information. SPILL OF LEAKAGE PROCEDURES: Contain spill. Do not contaminate sewers, ground waters or surface waters. Soak up in inert absorbent material & place into properly labeled & sealed non-leaking containers for disposal in authorized manner as hazardous waste.

PRODUCT SPECIFICATIONS: EPA Reg. No: 10807 – 146 Active Ingredients: Prometon: 3.73% Inert Ingredients: 96.27% Color: Brown Odor: Aromatic solvent pH: N/A Flash Point: 146 degrees F Lbs./gal.: 8.17 Shelf Life: One year in sealed container

LYN DISTRIBUTING Phone Outside Salt Lake Area 1-800-366-5022 965 No. Redwood Road, No. Salt Lake , Utah 84054 In Salt Lake Area (801) 295-5022

457

457

This surfactant is a specially formulated to increase the effectiveness of agricultural chemical sprays. It reduces the surface tension of fertilizer and pesticide solutions, allowing them to penetrate into soil quickly, for less run-off and waste. The great wetting also assures even and thorough wash-off of expensive chemicals. Proper use of this surfactant will provide optimum performance and cost effectiveness of agricultural chemical applications.

DIRECTIONS: Add 1 gallon of this surfactant per 1000 gallons of mixed spray solution, or follow manufacturer's recommendations on the chemical label.

GREENS KEEPER SURFACTANT

WATER SOLUBLE

SPREADER & WETTING AGENT

CAUTION: May irritate eyes. In case of contact, flush eyes with plenty of cool water for at least 15 minutes. If irritation persists, obtain medical attention. If swallowed, give several glasses of water and induce vomiting.

INCREASES THE EFFECTIVENESS OF

FERTILIZERS, HERBICIDES, INSECTICIDES, FUNGICIDES, [RON, AND MICRONUTRIENT SOLUTIONS.

CAUTION: May irritate eyes. See side panel for further cautions and first aid instructions. KEEP OUT OF REACH OF CHILDREN

LYN DISTRIBUTING 965 NORTH REDWOOD ROAD NORTH SALT LAKE, UT. 84054

PHONE 295-5022 OUTSIDE SALT LAKE AREA 1-800-366-5022

458

458

Drum Pumps & Other Pumps From

Lyn Distributing

Phone 1-800-366-5022

801-295-5022

# 372

Siphon Pump - fits 55-gallon drums with 2" bung opening. Constructed of polyethylene. Dispensing rate of 1 pint per 5 strokes. Can be used with water and light oil

or other light fluids Not corrosive to polyethylene. Siphons to a lower level or pumps to higher level.

# 2134

Plastic Pump Hose. 4' X ¾” I.D. clear vinyl hose coupled on one end with a special thread (F) fitting and

on the other with a discharge nozzle. For use with MODEL 360, 362, 363 and 365 plastic pumps.

# 2136 Same as above only 6' long

# 10190 Lever Handle Metal Pump for High Viscosity

Liquids. An easily operated metal pump with die-cast Zinc alloy body, ideal for high viscosity liquids such as

paraffin, gear oil, etc. Suction Tube telescopes to fit various containers. Includes curved spout and high angle spout. Dispenses approximately 1 gallon per 8

strokes. Fits 15 to 55 gallon drums and other containers with a 2"NPT opening.

# 360 Lift Action Drum Pump Polypropylene Drum Pump w/o hose - fits 15 through 55-gallon drums with 2" bung opening. Constructed of polypropylene and nickel plated steel. Can be used with weak acids, anti-freeze, some mild chemicals and detergents. Includes bung adapter and discharge spout. Spout can be removed and special hose attached. Dispenses approximately 14 oz. per stroke. Hose ordered separately. (2134 4' length or 2136 6' length)

459

459

# 11219 Stainless Steel Rotary Pump

Stainless Steel Rotary Drum Pump Flow: 12 ounces / Rotation. Maximum Fluid Temperature For The Stainless Steel Rotary Drum Pump: 140˚F / 60˚C.

Mounting: 2 inch Male NPT Bung Adapter. Stainless Steel Rotary Drum Pump Suction Tube Length: 40 inch Maximum. Inlet: 1-1/4 inch O.D. Outlet: 1 inch O.D. Curved Spout 3/4” hose barb on spout. Stainless Steel

Pump Wetted Parts: 304 Stainless Steel & Teflon. Stainless Steel Rotary Pump Maximum Viscosity: 2,000 SSU (140 Weight Gear Oil). Standard Packing: 1 each

Gross Weight: 14 pounds each. This Stainless Steel Rotary Drum Pump is ideal for transferring soluble, corrosive, volatile and aggressive chemicals, such as

esters, ketones, alcohols, bases, alkali, acids, hydrocarbons, chlorinated hydrocarbons and water based

liquids which are compatible with pump component materials.

# 352 Pail Pump

Hand Pump - fits 5 through 6 1/2 gallon pails. Features a 48" vinyl discharge hose with curved metal spout at the discharge end, steel suction tube with plastic extension, standard bung adapter for external threads, special bung adapter for Rieke spout, and drain back for curved metal spout with standard bung adapter. Dispenses approximately 1 quart per 15 strokes.

# 365 Nylon Pump w/o hose

- fits 15 through 55-gallon drums with 2" bung opening. Constructed of nylon, stainless steel, and special

packing. Can be used with some stronger chemicals and solvents, such as lacquer thinner. Also suitable for edible products such as cooking oils. Includes bung adapter and discharge spout. Spout can be removed and special hose

attached #2134. Dispenses approximately 8 oz. per stroke.

# UNS428

Plastic Drum Pump with Pail Adapter Fits both 3/4 and 2 openings. Includes one pail adapter that snaps onto 5 gallon pails. Pumps 8 oz. per stroke. Pump fits 15 30 and 55 gallon drums.

460

460

# 36 Drum Pump Hose

½” I.D. clear vinyl tubing coupled on one end with a garden hose thread (F) fitting. 5' long. For use with

MODEL D-S, 338, 366, 381 and other drum pumps with garden hose threads.

# 366 Barrel Pump

without hose - fits 15 through 55-gallon drums with 2" bung opening. Has zinc die-cast piston with brass piston ring. Includes bung adapter and curved discharge spout.

Discharge spout can be rotated 180 ° and can be removed to expose garden hose threaded outlet. Dispenses approximately 1-1/2 pints per stroke.

# 381 Barrel Pump

Fits 15 through 55-gallon drums with 2" bung opening. Has a zinc die-cast piston with two brass rings, steel

telescoping tube assembly, Buna N Seals, plastic handle grip, and curved discharge spout with garden hose

threads. Dispenses approximately 1 pint per stroke. Has adjusting nut on bung threads.

# 366T Paint Thinner Pump

Barrel Pump w/o hose - fits 15 through 55-gallon drums with 2" bung opening. Has zinc die-cast piston with brass piston ring. Includes bung adapter and curved

discharge spout. Discharge spout can be rotated 180 ° and can be removed to expose garden hose threaded

outlet. Dispenses approximately 1-1/2 pints per stroke. MODEL 366T is unpainted and with lacquer thinner rod

packing.

461

461

# 382

Barrel Pump - same as MODEL 381 except is equipped with MODEL D01 non-drip attachment.

Features. Powder coated silver gray steel construction with die cast aluminum head. Heavy duty pump lever with rubber grip. Includes non-drip attachment (New

design). Garden hose threads on the head of the pump. A Buna N seal is used under the packing nut as a wiper as the rod is lifted up. Brass piston rings for long wear and oil additive resistance. Will easily adapt from 15 to 55 gallon drums with telescoping pickup tube. Unique

variable stroke allows for easy transfer of varied viscosity fluids at a rate of 9 ½ to 15 ounces per strokeBox Contents: Attractive retail box. Weight 5 poundsRecommended For: Light oils (Maximum 40 weight).

Kerosene, diesel, ATF and hydraulic fluid • Not suitable for chemicals or water based fluids Applications: Shop use for dispensing into small

measures or open containers. Best used to dispense fluids from drums to small containers

#385

Stainless steel lift pump for 2” bung opening. 22 oz. per stroke capacity. Removable discharge spout to attach ¾”

NPT hose (Model 2154) (hose Not included).

# D-S

Drum Pump w/o hose - fits 15 through 55-gallon drums with a 2" bung opening. Has a zinc die-cast piston with two brass piston rings, steel telescoping tube assembly, Buna N seals, plastic handle grip, and curved discharge

spout with garden hose threads. Dispenses approximately 1 pint per stroke. Attractive red enamel

finish.

#975

An accurate (adjustable stroke) Piston Pump, with rack and pinion gearing, which dispenses lubricating oils and

other non-corrosive liquids. Made from carbon steel, durable lightweight aluminum casting and Delrin® for its molded piston. The base is threaded 2" NPT to fit standard drum and tank opening. Includes a 2" bung

adapter and a telescoping suction tube assembly for use with 15 through 55-gallon drums, swing return drain

tube and lockable crank arm.

462

462

# 2154

Rotary Pump Hose. 4 feet of ¾’ clear vinyl tubing coupled on one end ¾” NPT (F). For use with MODEL

950, 952 and 1002 rotary pumps.

# 2156 = 6' long

# 2178

Rotary Pump Hose. 8' X ¾” I.D. synthetic rubber hose coupled ¾” NPT (F) one end and with a discharge

nozzle on the other. For use with MODEL 950, 952, 1007 and 1002 rotary pumps.

# 30A1

Diaphragm Pump - fits15 through 55-gallon drums, or tanks with 2" bung opening. A double acting diaphragm

pump for dispensing gasoline, diesel fuel, and similar petroleum products. Steel and aluminum telescoping

tube assembly (22" to 39"), MODEL L30-95N 8' hose with straight through discharge nozzle, ¾” NPT inlet and

outlet. Delivers approximately 1 gallon per 8 strokes.

# 30A2

Diaphragm Pump - same as MODEL 30A1 except includes automatic cut-off type discharge nozzle.

# 1002

Rotary Hand Pump - fits 15 through 55-gallon drums with 2" bung opening. A rotary vane type pump for

dispensing gasoline, diesel fuel, and similar light petroleum products. Heavy-duty cast iron body, dual

vanes, and bung adapter. Discharge spout threaded ¾-inch NPT (Male). Hose assemblies 2154, 2156, 2158,

and 2178 available at extra cost. Dispenses approximately 7-½ gallons per 100 revolutions.

463

463

https://www.lyndistributing.com/cgi-bin/shopper.cgi?preadd=action&key=zlin30a�

# P-490S

Plastic Lever Pump viton seals and stainless steel rodHand pump lever handle self priming with a plastic

piston and body for excellent chemical resistance.. Fits 15-gallon drums through 55-gallon drums with 2" bung opening threads for plastic drums. Body constructed of Polypropylene with stainless steel rod to be used with

chemicals, acids, alkali and other water based products. (compatibility chart available upon request). This drum

pump works great as a acid pump. Removable spout threaded for 3/4" garden hose fitting., telescoping

suction tube. Self-priming and self-venting. This barrel pump dispenses approximately 12 ounces per stroke.

# 1003

Model 1003 Rotary Pump - Same as MODEL 1002 but includes MODEL 2178 Hose and MODEL 53 nozzle

holster.

# P-490

Hand pump lever handle self priming with a plastic piston and body for excellent chemical resistance.. Fits 15-gallon drums through 55-gallon drums with 2" bung opening threads for plastic drums. Body constructed of Polypropylene with steel rod to be used with alcohol, fuel oils, lubricants, and other water based products.

(compatibility chart available upon request). Removable spout threaded for 3/4" garden hose fitting., telescoping suction tube. Self-priming and self-venting. This barrel

pump dispenses approximately 12 ounces per stroke.

# 960

Model 960 Economy Rotary Pump - fits 15 through 55-gallon drums with 2" NPT bung opening. Dispenses

gasoline, diesel fuel, ATF, Light oils, and hydraulic oil. Heavy-duty cast iron body with 3 piece steel suction

tube 3/4 inch threaded discharge spout (M). Hose assemblies 2158 and 2178 available at extra cost. Dispenses approximately 7-1/2 gallons per 100

revolutions.

464

464

# R-490S

Hand pump lever handle self priming with a plastic piston and body for excellent chemical resistance.. Fits 15-gallon drums through 55-gallon drums with 2" bung opening threads for plastic drums. Body constructed of

Ryton with stainless steel rod to be used with chemicals, acids including harsh acids (nitric acid) , alkali and

other water based products. (compatibility chart available upon request). ). Removable spout threaded for 3/4" garden hose fitting., telescoping suction tube.

Self-priming and self-venting. This barrel pump dispenses approximately 12 ounces per stroke.

# R-490ST Same as above but contains Teflon component for enhanced resistance and longer

operational life.

# 961

Economy Rotary Pump - fits 15 through 55-gallon drums with 2" NPT bung opening. Dispenses gasoline, diesel fuel, ATF, Light oils, and hydraulic oil. Heavy-duty cast iron body with 3 piece steel suction tube 3/4

inch threaded discharge spout (M). Rotary Pump - same as MODEL 960 rotary pump except includes MODEL

2178 hose assembly and MODEL 53 holster..

# RP-90PT

Chemical Resistant Rotary Pump With TEFLON seal, TEFLON vane, PP spout and suction tube.

Made from light weight, rust resistance and good abrasion resistance materials. Ideal for transferring many

organic acids, organic alcohols, detergents, and other water soluble inorganic chemicals which are compatible

with pump component materials. Recommended for: Light oil (up to 30 wt.), Antifreeze, Windshield washer fluid, Methanol, Chlorinated solvents, Lubricants based fluids, Cleaning Solutions, Soaps, Edible Liquids, etc. Ideal for heavy-duty use in industrial, automotive and agricultural applications. Supply with 2" bung adapter and a 3-piece PP suction tube to fit most 15, 30 and 55

gallon drums. Polypropylene Rotary Pump is self-priming unit, dispenses approximately 8 ounces per

stroke.

# 155 Drum Pump - fits 55-gallon drums with 2" bung

opening. Includes pump, bung adapter, and 5 feet of clear vinyl hose with curved discharge nozzle. Can be furnished with a MODEL 1500 universal pint meter by

special order at additional cost.

465

465

# RP-90RT

With Teflon seal, Teflon vane, 304 Stainless Steel spout, Ryton suction tube. Application liquids: acid, alkali,

gasoline, diesel, machine oil, water, alcohol, thinner, and other chemical liquids. Resists nitric acid with concentration of up to 40%. Polypropylene Rotary

Pump is self-priming unit, dispenses approximately 8 ounces per stroke

# RP-90HDPE

Rotary Drum Pump Blue HDPE Body Rotary Drum Pump With HDPE, Teflon vane, HDPE spout, HDPE suction tube, Polyethylene flange seals,

Viton shaft seal. Application liquids: Bleach, chlorine, water and other chemicals compatible with HDPE. For industrial use. Dispenses approximately 1 gallon for 16

revolutions.

# 10130

Zinc Plate metal lift pump for dispensing soaps, detergents, antifreeze, windshield fluids, oils and other non corrosive products. Delivers 16 oz per lift. Spout

may be removed to garden hose attachment. Hose ordered separately. (hose # 88 is a 8' hose & 36 is a 5' hose). Fits 15 to 55 gallon drums and other containers

with a 2"NPT opening.

# 10140

Stainless steel Lift pump for dispensing mild acids, detergents, antifreeze, windshield fluids, MEK,

chlorinated solvents, and acetone. 316 stainless steel construction. Delivers 16 oz per lift. Spout may be removed to garden hose attachment. Hose ordered

separately. (hose # AIS88 is a 8' hose & AIS36 is a 5' hose). Fits 15 to 55 gallon drums and other containers

with a 2"NPT opening

#10110

Stainless Steel Drum Lift pump for dispensing mild acids, detergents, antifreeze, windshield fluids, MEK, chlorinated solvents, and acetone. 316 stainless steel

construction. Delivers 8 oz per lift.

#10180

Zinc Plate metal lift pump for dispensing soaps, detergents, antifreeze, windshield fluids, oils and other

non corrosive products. Delivers 8 oz per lift.

466

466

http://www.americasindustrialsupply.com/cgi-bin/americasindust/AIS88.html?id=73hXVIBw&mv_pc=39483

http://www.americasindustrialsupply.com/cgi-bin/americasindust/AIS36.html?id=73hXVIBw&mv_pc=39482

# 151

Buttress Thread Adapter for plastic drums with buttress thread for 2" openings. 2" NPT (F) inlet, 2" buttress (M)

outlet. Nylon.

# 169

Plug Wrench - non-sparking aluminum wrench for use with 2" and ¾” drum plugs

Phone Toll Free 1-800-366-5022 Phone 1-801-295-5022

467

467

29

Floor Squeegees

Huskee™ Sweepers

Dust Pans

Brooms

Floor Sweeps

Handle Braces

Dust Mops

Dust MopFrames & Handles

29

30

30-31

31-33

33-37

37

38-43

43-44

ConventionalFloor Pads

UHS Floor Pads

Wood Surfacing Pad

Floor Pad Usage Guide

Utility Pads & Holders

Stripping Boots

Carpet Care

Contour Pads

45-48

49-52

53

54

55

56

56-57

57

F LO O R C A R E M A I N T E N A N C E

Item Pack Case CaseBrand Number Shape Size Case Weight CubeCMC 1800 Straight 18" 2 4.00 lbs. 0.280

CMC 2400 Straight 24" 2 5.00 lbs. 0.300

CMC 3600 Straight 36" 2 6.38 lbs. 0.460

CMC C2400 Curved 24" 2 5.50 lbs. 0.480

CMC C3600 Curved 36" 2 7.12 lbs. 0.720

Floor Squeegees

METAL FLOOR SQUEEGEES

Heavy zinc plated metal frames with a high grade dual edge and replaceable rubber blades.Designed for tapered handles. Straight squeegees feature a steel scraper edge.

Item Pack Case CaseBrand Number Shape Size Case Weight CubeCMC 1722 Straight 22" 6 4.62 lbs. 0.940

CMC 1730 Straight 30" 6 5.94 lbs. 1.280

PLASTIC FLOOR SQUEEGEE

High-impact plastic frame is shock,, rust and acid resistant. Dual soft foam rubber blades con-tour to fit to floor surfaces for greater liquid removal. Universal handle socket fits handles up toa 1" diameter.

Item Pack Case CaseBrand Number Shape Size Case Weight CubeDisco NL504018 Straight 18" 10 7.00 lbs. 0.840

Disco NL504022 Straight 22" 10 7.75 lbs. 0.430

DISPOSABLE FLOOR SQUEEGEE

Double blade of styrene-butadyne flexible foam rubber with a galvanized metal frame. Flexibleblade contours to irregular surfaces. Ideal for quick and easy removal of liquids in work areas.

Accepts taperedhandles only.

Accepts handlesup to 1" diameter.

Accepts threadedhandles only.

All Wilen® products are now shipping out of our Bridgeton, MO facility.Select Wilen® products are also shipping out of our Chino, CA facility.

029_057 9/18/10 8:18 AM Page 27

468

468

30

Huskee™ Sweepers

HUSKEE™ SWEEPER

Our commercial sweeper with horsehair and boar brush agitation has a 180˚ handle. It has alow profile design and textured paint that resists scratches, while allowing unit to lay flat to go

under furniture. Rubber bumpers prevent wall and door damage.

Item Pack Case CaseBrand Number Width Case Weight CubeCMC 5323 91/2" 1 2.72 lbs. 0.500

HUSKEE™ POWERROTOR SWEEPER

These sweepers clean hard floors and carpets. The self-cleaning flexible rubber blades beatthe floor with high frequency, creating friction and momentum that cleanly transports dirt, food,

lint and other debris into the dust compartments. Durable plastic body resists scratches anddents and is easy on walls, doors and furniture.

Item Pack Case CaseBrand Number Width Case Weight CubeCMC 5325 91/2" 1 2.51 lbs. 0.220

CMC 5327 121/2" 1 3.74 lbs. 0.360

5325

5327

UTILITY DUST PAN

Constructed of tough, yet flexible, black plastic with a contoured handle that snaps ontostandard broom handles for easy storage and accessibility. Yellow and black rubber lip lets

you sweep up dust and dirt that most dust pans miss. Hang hole for wall storage.

Item Pack Case CaseBrand Number Size Case Weight CubeWilen E601000 11" x 15" 12 11.00 lbs. 1.858

JUMBO DUST PAN

This lightweight, yet strong dust pan has an 18" mouth, making it ideal for outdoormaintenance such as picking up leaves and other debris that require a large capacity.

Contoured handle has a hang hole and also fits on standard broom or rake handles for easystorage and accessibility. Rubber feet prevent sliding on smooth surfaces.

Item Pack Case CaseBrand Number Size Case Weight CubeWilen E603000 18" x 18" 12 5.00 lbs. 2.828

Dust Pans

PLASTIC DUST PAN

Constructed of tough, yet flexible, black plastic with thin front edge for maximum dirt pick up.Handle hanger hole for easy hanging.

Item Pack Case CaseBrand Number Size Color Case Weight CubeCMC 712 4" x 121/4" x 12" Black 12 5.10 lbs. 1.370

12"

8"

15"

11"

18"

18"

029_057 9/18/10 8:18 AM Page 28

469

469


31

HEAVY DUTY METAL DUST PAN

This heavy-duty metal dust pan is 12" wide, ribbed for extra strength and powder coated forlonger life. Angled front edge for maximum dirt pick up. Handle hanger hole for easy storage.

Item Pack Case CaseBrand Number Size Color Case Weight CubeCMC 715 23/4" x 12" x 131/2" Black 2 dz. 29.88 lbs. 1.720

EXTRA WIDE METAL DUST PAN

Heavy-duty 16" wide metal dust pan is ribbed for strength and powder coated for longer life.Angled front edge for maximum dirt pick up. Handle hanger hold for easy storage.

Item Pack Case CaseBrand Number Size Color Case Weight CubeCMC 716 41/4" x 16" x 15" Black 12 26.88 lbs. 2.520

PICK UP DUST PAN

Metal dust pan with powder coated finish. Chrome handle with hanger.

Item Pack Case CaseBrand Number Size Color Case Weight CubeCMC 825 12" x 9" x 301/2" Black 6 20.22 lbs. 3.300

Item Pack Case CaseBrand Number Size Color Case Weight CubeCMC E500000 7/8" x 8" x 351/2" Black 12 11.10 lbs. 2.310

METAL LOBBY DUST PAN

Self opening and closing lid with extra long chrome handle. Pan/door are metal with powdercoated finish for longer life. Also available with an “L” grip handle for comfort and control.

Item Pack Case CaseBrand Number Handle Size Color Case Weight CubeCMC 808 Straight 12" x 97/8" x 313/8" Black 6 25.02 lbs. 3.240

CMC 808L “L” Shape 12" x 97/8" x 351/2" Black 1 5.75 lbs. 1.980

LOBBY DUST PAN

Durable plastic hopper with vinyl coated steel handle. Pan snap-locks in use and releases todump or carry. Space saving hanger for storage. The true-edge of pan conforms to floor - noneed for repeated sweeping. Serrated yoke provides area to “comb” debris from lobby broom.

Item Pack Case CaseBrand Number Size Color Case Weight CubeCMC 912BK 103/4" x 12" x 363/4" Black 6 9.60 lbs. 1.500

Lobby Brooms

ANGLED LOBBY BROOM

Angled lobby broom with flagged polypropylene bristles, black plastic frame and 7⁄8" diameterwood handle. Bristle length is from 4" to 5".

12"

8"

12"

10"

12" 9.75"

12" 9.75"

7.5"

16"10"

029_057 9/18/10 8:18 AM Page 29

470

470

32

Clean Sweep™ BroomsUpgrade your corn broom line with Clean Sweep™, the highest quality corn brooms made. For routine or heavy-dutycleaning, these durable upright brooms are designed for long life and efficient sweeping. Most are available with your

choice of 100% broom corn or economical blend fibers. All brooms feature double-stitched, nylon cord bound fibers thatare wire wrapped onto wood handles.

CORN / CORN BLEND BROOMS

The Clean Sweep™ Corn Broom line offers an upright broom for every cleaning task. This line features highquality corn brooms made for routine or heavy duty cleaning. These durable upright brooms are designed

for long life and efficient sweeping.

Item Fill No. of Stitch Metal Size/Color Total Pack Case CaseBrand Number Description Bristle Weight Stitches Color Band of Handle Length Case Weight CubeWilen E502036 Warehouse Blend 32# 5 Black Yes 11/8" Brown 56" 6 16.00 lbs. 3.263

Wilen E502028 Warehouse Blend 28# 4 Black Yes 11/8" Brown 56" 6 14.00 lbs. 4.296

Wilen E503028 Warehouse 100% Corn 28# 4 Red Yes 11/8" Brown 56" 6 14.00 lbs. 3.888

Wilen E504028 Janitor Blend 28# 5 Black No 11/8" Black 551/2" 6 14.00 lbs. 1.489

Wilen E502024 Housekeeper Blend 24# 4 Black No 7/8" Brown 531/2" 6 12.00 lbs. 1.460

Wilen E502018 Fan Maid Blend 18# 4 Black No 7/8" Brown 54" 6 9.00 lbs. 1.583

Wilen E503017 Maid 100% Corn 17# 5 Red No 7/8" Brown 521/2" 6 9.00 lbs. 1.583

Wilen E503500 Lobby Blend 7# 3 Black No 7/8" Brown 381/2" 12 9.00 lbs. 1.400

Wilen E503000 Lobby 100% Corn 7# 3 Red No 7/8" Brown 381/2" 12 9.00 lbs. 1.400

Wilen E513500 Toy Blend 7# 2 Black No 7/8" Brown 253/4" 12 7.00 lbs. 1.114

Wilen E504500 Whisk Blend 6# 2 Black No Hang Cap 11" 12 6.00 lbs. 0.848

Wilen E504000 Whisk 100% Corn 6# 2 Red No Hang Cap 11" 12 6.00 lbs. 0.848

Angle BroomsCONTEMPORARY PLASTIC BROOMS

HUSKEE™ SWEEP

Introducing our new multi-use sweep. Stiff black polypropylene fibers for fine to heavy sweeping. Angleddesign allows you to sweep into corners and hard to reach places. The sweep has a built-in grip brace

that allows you to remove the upright handle and use it as a whisk broom. Perfect for Industrial andFood Service applications.


Item Bristle Bristle Handle Size/Color Pack Case CaseBrand Number Bristle Color Trim Material of Handle Case Weight CubeWilen E515012 Flagged Polypropylene Black 6" Metal 1" x 48" Yellow 6 8.00 lbs. 3.923

12"

SYNTHETIC LOBBY BROOM

At 35" high, this broom is perfectly sized for use with our lobby dustpan. Stiff, flagged, polypropylenebristles do an excellent job of collecting debris on floor surfaces ranging from carpet to tile.

Item Bristle Bristle Handle Size/Color Pack Case CaseBrand Number Bristle Color Trim Material of Handle Case Weight CubeWilen E503600 Flagged Polypropylene Black 4" Metal 7/8" x 30" Black 6 4.00 lbs. 1.030


8"

029_057 9/18/10 8:18 AM Page 30

471

471


33

TRI-ANGLE BROOM

The versatile Tri-Angle may be used as a regular broom, a high duster or a whisk broom. Extend thehandle and you have a high duster that reaches 10 foot ceilings. Unscrew the handle and you have anergonomic whisk broom for smaller sweeping jobs.

Item Bristle Bristle Handle Size/Color Pack Case CaseBrand Number Item Bristle Color Trim Material of Handle Case Weight CubeWilen E505000 Complete Flagged PVC Yellow 4" Metal 1" x 31"-58" Black 12 16.00 lbs. 0.390

Wilen E506000 Head Only Flagged PVC Yellow 4" N/A N/A 12 9.00 lbs. 1.290


12"

ANGLED BROOM

Both sizes feature an angled design for sweeping into corners and tight areas and are attached to a48" long metal handle. The bristles are available with yellow polypropylene flagged or unflagged tips.

Item Bristle Bristle Handle Size/Color Pack Case CaseBrand Number Item Bristle Color Trim Material of Handle Case Weight CubeWilen E507008 Small /Complete Flagged PVC Yellow 5 1/2" Metal 7/8" x 48" Black 12 12.00 lbs. 3.900

Wilen E507012 Large/Complete Flagged PVC Yellow 6" Metal 7/8" x 48" Black 12 15.00 lbs. 3.900

Wilen E507112 Large/Complete Unflagged PVC Yellow 6" Metal 7/8" x 48" Black 12 15.00 lbs. 3.900


12"

Choosing the Best Value in SweepsHere’s a primer to help you brush up on your bristles! With an abundant brush and broom SKUs in this catalog, we can’t possibly cover everything—but a good basic understanding of fibers, blocks and construction techniques can go a long way.

Why So Many Fibers?Stiffness, liquid retention, durability and cost are just a few of the characteristics that make certain fibers better for certain jobs. And since brushes are used for so many different jobs—from dusting to applying wallpaper paste—there has to be a wide variety, as shown below:

NylonA resilient synthetic fiber that has a high heat tolerance, excellent bend recovery and can be autoclaved. It is available straight, crimped orflagged. Resists acid, heat, oil and most solvents. Used in most scrub brushes.

PolypropyleneA synthetic fiber that is available crimped or straight in a variety of colors. It has a very long life and high resistance to acid and most solvents.

Black Tampico Comes from the leaf of the cactus-like Lechuguilla plant of Mexico. With a soft to medium texture and good durability, Tampico may be used alone

or blended with other materials. Off-white in color, the fibers are dyed black.

White TampicoComes from the cactus-like Lechuguilla plant of Mexico. With a soft to medium texture and good durability, Tampico may be used alone or blended

with other materials. It has excellent liquid retention and is highly resistant to solvents and chemicals. Original color.

Horsehair From the tail or mane, has soft to slightly stiff characteristics and offers good texture and resilience. It may be used pure or blended with other

materials and is available in black or grey. Used for scratchless cleaning of highly polished areas.

Palmyra Stalks Very coarse and durable. Texture is quite stiff. It has the appearance of split bamboo and is primarily used for street brooms.

PalmyraComes from the base of the leaf stalks of the Palmyra palm of India and Africa. Texture is medium stiff to stiff. Low cost, durability and liquid

resistance make it ideal for a wide variety of uses. Comes brown in color.

029_057 9/18/10 8:18 AM Page 31

472

472

34

What does “flagged” mean?Many brushes have “flagged” (also known as “feathered”) bristles. Flagged bristles contain split ends which decrease stiffness andadd liquid and dust retention properties. This soft, synthetic fiber is ideal for dusting, fine sweeping of smooth surfaces and washingvehicles without scratching.

BlocksFibers are set into either structural foam or wood blocks, both of which come in a variety of styles and sizes. More and more end-users are choosing structural foam due to its obvious advantages—durability, water resistance and its non-warping, non-splinteringcharacteristics. Nevertheless, many end-users still prefer traditional wood.

Push ItThere are several different types of floor brushes (or push brooms) available: Floor Sweeps, for indoor surfaces; Garage Sweeps, for concrete and outdoor use; and StreetBrooms, for sweeping heavy debris on rough surfaces. In addition, each of these categories contain a variety of styles and sizes. For larger sweeps, our Handle Bracesprovide added support and keep the sweep from twisting. This informative catalog can help you decide what’s best for your particular application.

Scrub ItJust as there are many different surfaces to clean, there are many different brushes to accommodate these different needs. What tolook for: appropriate fiber stiffness for the job; block or handle ergonomics; and surface coverage. To give synthetic fibers betterliquid retention while retaining their superior strength, specify “crimped” fibers.

Dust It, Spread It, Scrape It, Wash It . . . Look to Wilen for products that work. We have the variety and styles for every environment and application.

The Wilen AdvantageWhat makes Wilen brushes better? Everything! From our state-of-the-art, computerized machinery, to our high quality construction,

to our breadth of line, you can be assured you’ll find the right tool for the right job.

Floor SweepsFINE TO MEDIUM FLOOR SWEEPS

Unparalleled quality makes Wilen’s floor sweeps the best value. With a variety of sizes, fibers and a choice of lacquered hardwood and structural foam, a sweep is available for every application. All blocks come with two

threaded handle holes. 36" wood sweep also includes handle arm braces for added strength. Sweep handles are sold separately.

FLAGGED POLYPROPYLENE FINE FLOOR SWEEP

This split-tipped synthetic fiber sweep is excellent for picking up fine particles of dust and dirt on smoothfloor surfaces. Grey fibers.

Item Block Bristle Pack Case CaseBrand Number Block Size Trim Case Weight CubeWilen F002018 Wood 18" 3" 12 20.00 lbs. 1.750

Wilen F002024 Wood 24" 3" 12 30.00 lbs. 2.298

Wilen F002036 Wood 36" 3" 4 24.00 lbs. 1.039

Wilen F002118 Foam 18" 3" 12 24.00 lbs. 1.750

Wilen F002124 Foam 24" 3" 12 30.00 lbs. 2.298

FLAGGED POLYPROPYLENE DOUBLE FILL FLOOR SWEEP

Fine flagged fibers on the outside edge with medium flagged fibers on the inside make this a very efficientsweep for cleaning smooth surfaces like wood, tile and smooth concrete. Water and solvent resistant fibers.

Black center fibers with orange casing fibers.


Wilen F003024 Wood 24" 3" 12 33.00 lbs. 2.298

Wilen F003036 Wood 36" 3" 4 24.00 lbs. 1.039

Wilen F003118 Foam 18" 3" 12 24.00 lbs. 1.750

Wilen F003124 Foam 24" 3" 12 33.00 lbs. 2.298

Accepts threaded handles only.


029_057 9/18/10 8:18 AM Page 32

473

473


35

ALL PURPOSE DOUBLE FILL FLOOR SWEEP

Heavy polypropylene center and flagged polypropylene around the outside perimeter to pick up both fineand medium particles. Black center fibers with grey casing fibers.


Wilen F004024 Wood 24" 3" 12 33.00 lbs. 2.298

Wilen F004036 Wood 36" 3" 4 24.00 lbs. 1.039

Wilen F004118 Foam 18" 3" 12 24.00 lbs. 1.750

Wilen F004124 Foam 24" 3" 12 33.00 lbs. 2.298

BLACK TAMPICO FLOOR SWEEP

This full bodied, flexible and long wearing sweep is ideal for industrial or commercial cleaning on concrete,wood or tile floors. Considered the best all-purpose tool for fine to medium clean up jobs. Black fibers.


Wilen F006024 Wood 24" 3" 12 30.00 lbs. 2.298

Wilen F006036 Wood 36" 3" 4 24.00 lbs. 1.039

Wilen F006118 Foam 18" 3" 12 25.00 lbs. 1.750

Wilen F006124 Foam 24" 3" 12 30.00 lbs. 2.298

BLACK POLYPROPYLENE FLOOR SWEEP

All purpose medium sweep for indoor/outdoor cleaning in industrial and commercial settings. Black fibers.


Wilen F007024 Wood 24" 3" 12 35.00 lbs. 2.298

Wilen F007036 Wood 36" 3" 4 24.00 lbs. 1.039

Wilen F007118 Foam 18" 3" 12 24.00 lbs. 1.750

Wilen F007124 Foam 24" 3" 12 35.00 lbs. 2.298




029_057 9/18/10 8:18 AM Page 33

474

474

36

Garage SweepsHEAVY-DUTY, INDOOR / OUTDOOR FLOOR SWEEPS

These medium to heavy sweeps feature coarser fibers than regular floor sweeps. This allows them to sweep heavier debris and perform better on rough surfaces like driveways. Available with lacquered hardwood and structural foamblocks, these long-wearing sweeps are ideal for outside sweeping, basements, warehouses and other rough surface areas.

30" and 36" wood sweeps include handle braces. Sweep handles are sold separately.

HEAVY POLYPROPYLENE GARAGE SWEEP

This durable, heavy-duty sweep is great for sweeping on wet or dry surfaces. Recommended for places likestreets, sidewalks, warehouses, driveways or basements. Also good for sweeping light snow. Green fibers.


Wilen F101024 Wood 24" 3" 12 35.00 lbs. 2.298

Wilen F101036 Wood 36" 3" 4 20.00 lbs. 1.039

Wilen F101118 Foam 18" 3" 12 26.00 lbs. 1.750

Wilen F101124 Foam 24" 3" 12 35.00 lbs. 2.298

CRIMPED POLYPROPYLENE GARAGE SWEEP

Excellent for commercial applications. Recommended for gas stations, food service, plants and othercommercial buildings. Solvent resistant fibers add to longer life. Maroon/brown fibers.


Wilen F103024 Wood 24" 3" 12 35.00 lbs. 2.298

Wilen F103036 Wood 36" 3" 4 20.00 lbs. 1.039

Wilen F103118 Foam 18" 3" 12 26.00 lbs. 1.750

Wilen F103124 Foam 24" 3" 12 35.00 lbs. 2.298

PALMYRA GARAGE SWEEP

The ideal sweep for coarse, heavy dirt on wet or dry surfaces. Ideal on driveways, basements,sidewalks and garages. Natural fibers.


Wilen F102024 Wood 24" 4" 12 37.00 lbs. 2.298

Wilen F102030 Wood 30" 4" 1 4.00 lbs. 0.450

Wilen F102036 Wood 36" 4" 1 5.00 lbs. 0.376




029_057 9/18/10 8:18 AM Page 34

475

475


37

Street & Patio SweepsCOURSE, OUTDOOR SWEEPSFor extra rough surfaces and heavy debris, these street and patio sweeps are perfect. Coarse, extra longfibers are great for a variety of heavy-duty, outdoor applications. Hardwood blocks have two taperedhandle holes. Order handles separately.

PALMYRA STALKS STREET SWEEP

This very coarse, long-lasting and durable fiber is perfect for any rugged sweeping. Ideal for streets,concrete and barns. Can also be used on any wet or dry surface. Natural fibers.

Item Block Bristle Pack Case CaseBrand Number Block Size Trim Case Weight CubeWilen F201016 Wood 16" 61/4" 6 19.00 lbs. 1.750

EXTRA SUPPORT HANDLE HARDWARE

HANDLE BRACE

Braces provide support, reduce breakage and add life to the handles. Angle braces provide extra supportfor wide sweeps. Available for all 24" wood block floor and garage sweeps. Our 30" and 36" sweepsinclude angle braces.

Item Pack Case CaseBrand Number Item Case Weight CubeWilen M202000 Brush Handle Arm Brace 12 5.00 lbs. 0.469

Assembled Floor & Garage SweepsThese high quality sweeps provide long lasting performance. Features include a heavy-duty zinc cast handle connector,durable 11⁄8" x 60" hardwood handle and a double-lacquered, smooth finish hardwood block. 12 gauge steel bracesstabilize the sweep head. Available in a variety of sizes.

MEDIUM POLYPROPYLENE ASSEMBLED FLOOR SWEEP

This all purpose medium floor sweep is great for indoor/outdoor cleaning in industrialand commercial areas. Blue fibers.


Wilen F522480 Wood 24" 4" 4 19.00 lbs. 10.137

HEAVY POLYPROPYLENE ASSEMBLED GARAGE SWEEP

This heavy-duty assembled sweep is great for sweeping on wet and dry surfaces.Ideal for streets, driveways and basements. Green fibers.


Wilen F532480 Wood 24" 4" 4 23.00 lbs. 10.137

Handle Braces

Accepts taperedhandles only.

029_057 9/18/10 8:18 AM Page 35

476

476

38

Choosing the Best Value in Dust Mops

The removal of dust and dirt particles is the first step in proper floor care. A preventative maintenance program using quality dustmops will protect your floor and finish from abrasive dust and dirt particles. To accommodate your needs, we offer a wider variety ofdust mops to assist in the efficient removal of dust and dirt. Let the following information assist you in choosing which dust mop isright for your needs.

YarnCotton is the most popular and economical yarn but lacks the longevity of stronger, though less absorbent, synthetic fibers. Cotton is often blended with synthetic fibers to addstrength. Some of these yarns are designed to withstand laundering while others, like disposables, are constructed with bulky, loosely twisted yarn that actually picks up dustbetter. Our PermaTwist™ cotton yarn combines exceptional durability via a unique fiber bonding process. Nylon, like that used in our Durastat™, has electro-static propertiesthat attract dust particles without the use of treatment.

BackingSynthetic backing material has replaced cotton as the industry standard becauseit dries much faster and absorbs less treatment than cotton. We also offer a vari-ety of backing styles including: Open Back, Key Hole, Slot Pocket and Break-Away (illustrated at right). All four backing styles are available for construction inour Professional Dust Mop category. Ties are also available upon request. OurSwivel Snap category is only available with a Key Hole style backing. Our ValueLine category is only available with an Open Back style. Our Disposable DustMops are only available with backings as shown. Backing colors include: red,blue, green and white, and match the color of the yarn, only. Backing colors maynot differ from the yarn color. Open Back Slot Pocket Key Hole Break Away

❶ A wide variety of high grade yarns provide maximumdurability and performance.

❷ Extra stitching assures long life, even with laundering.

❸ Heavy-duty, rust resistant snaps are fast and easy to use.

❹ Durable synthetic (polyester) backing dries fast and isavailable in bright colors.

❶

❷

❸❹

Cut-EndThe cut-end dust mop, though more economical at first, tends to fray, unravel and lint. These problems decrease its performance and lead to replacement of the mop. These problems are intensified by laundering. Our PermaTwist™ solves this problem by bonding the yarn fibers.

Looped-EndBy trapping more dust, producing less yarn debris, and resisting tangles, the looped-end dust mop delivers maximum performance. Becauselooped-end yarns withstand heavy use and frequent laundering without fraying and unraveling, linting is virtually eliminated. Looped-end yarnis available in long strands for greater coverage or short loops for hi-tech and health care applications.

DurabilityHigh quality construction standards lead to the best value in a dust mop. Mops of professional quality have pre-shrunkbackings and top grade yarn to withstand heavy use and repeated launderings. Reinforced stitching at stress points aresigns of better mop construction. Innovative yarns, like our Twister Loop™, Durastat™ and PermaTwist™, can providelonger lasting service as well as increased performance.

Frames & HandlesTo provide free swiveling or rigid handle positions, use a handle with a swivel-snap device attached to the frame. Frames are available from 12" to 72". Our Stick-M™ line uses a flat plastic base for maximum surface contact. Its velcro type attachment system allows quick and easy changes. Our Wear Ever™ Frame also provides a wide, flat surface for maximum yarn-to-floor contact, resulting in greater dust mop efficiency.

029_057 10/1/10 4:21 AM Page 36

477

477


39

Professional Dust MopsDURABLE, LAUNDERABLE MOPSThese high performance dust mops are designed and constructed for industrial launderers, health carefacilities and other demanding applications. Innovative yarns, pre-shrunk synthetic backings and heavy-dutyconstruction techniques provide maximum durability and efficiency.

PERMATWIST™

Exclusive bonding process of 100% ring-spun cotton yarn virtually eliminates fraying andlinting. Brilliant, permanent colors keep this duster looking new. PermaTwist™ deliversunsurpassed durability and performance and is the best dust mop you can buy. Launderable.

5" BackItem Yarn Pack Case Case

Brand Number Size Color Case Weight CubeWilen C001018* 18" Natural 12 12.00 lbs. 1.290

Wilen C001024* 24" Natural 12 15.00 lbs. 1.812




Wilen C003018 18" Blue 12 12.00 lbs. 1.290

Wilen C003024 24" Blue 12 15.00 lbs. 1.812

Wilen C003036 36" Blue 12 22.00 lbs. 2.265

Wilen C003048 48" Blue 6 15.00 lbs. 1.812

Wilen C003060 60" Blue 6 18.00 lbs. 1.812

Wilen C004018* 18" Green 12 12.00 lbs. 1.290

Wilen C004024* 24" Green 12 15.00 lbs. 1.812

Wilen C004036* 36" Green 12 22.00 lbs. 2.265

Wilen C004048* 48" Green 6 15.00 lbs. 1.812

Wilen C004060* 60" Green 6 18.00 lbs. 1.812

*Special Order Products

This close-upPermaTwist™ strandshows the “blooming”effect of the yarn’s endafter laundering,enabling maximum dustpick-up and retention.

TWISTER LOOP™

Twisted loop cotton yarn provides maximum durability for laundering and heavy use. No cutends to lint and fray. Twisted yarn provides an effective dust trap for better collection andretention. Yarn is dyed and laundered.


Brand Number Size Color Case Weight CubeWilen C013018* 18" Natural 12 12.00 lbs. 1.290





Wilen C014018* 18" Red 12 12.00 lbs. 1.290

Wilen C014024* 24" Red 12 15.00 lbs. 1.812

Wilen C014036* 36" Red 12 22.00 lbs. 2.265

Wilen C014048* 48" Red 6 15.00 lbs. 1.812

Wilen C014060* 60" Red 6 18.00 lbs. 1.812

Wilen C015018* 18" Blue 12 12.00 lbs. 1.290

Wilen C015024* 24" Blue 12 15.00 lbs. 1.812

Wilen C015036* 36" Blue 12 22.00 lbs. 2.265

Wilen C015048* 48" Blue 6 15.00 lbs. 1.812

Wilen C015060* 60" Blue 6 18.00 lbs. 1.812

Wilen C016018* 18" Green 12 12.00 lbs. 1.290

Wilen C016024* 24" Green 12 15.00 lbs. 1.812

Wilen C016036* 36" Green 12 22.00 lbs. 2.265

Wilen C016048* 48" Green 6 15.00 lbs. 1.812

Wilen C016060* 60" Green 6 18.00 lbs. 1.812


Polyester Keyhole with snaps standard.

Sewn Backing 2-ply


Tufted Backing 2-ply

029_057 9/18/10 8:19 AM Page 37

478

478

40

DURASTAT™

Durable 2-ply synthetic yarn attracts dust like a magnet using electro-static properties. Unlike other mops, Durastat™ requires no treatment, making it ideal for use in chemical sensitive areaslike hospitals and laboratories. In addition, the extra durable yarn is virtually lintless and frayless

even with intensive laundering.


Brand Number Size Color Case Weight CubeWilen C051018* 18" White 12 8.00 lbs. 1.290

Wilen C051024* 24" White 12 10.00 lbs. 1.812

Wilen C051036* 36" White 12 15.00 lbs. 2.265

Wilen C051048* 48" White 12 19.00 lbs. 2.828

Wilen C051060* 60" White 6 11.00 lbs. 1.812

Wilen C052018 18" Blue 12 8.00 lbs. 1.290

Wilen C052024 24" Blue 12 10.00 lbs. 1.812

Wilen C052036 36" Blue 12 15.00 lbs. 2.265

Wilen C052048 48" Blue 12 19.00 lbs. 2.828

Wilen C052060 60" Blue 6 11.00 lbs. 1.812


2-ply

4-ply

Polyester Keyhole with snaps standard.Requires no treatment.

Sewn Backing

Conventional Dust Mops

SWIVEL SNAP™

This industry standard dust mop is constructed of 4-ply cotton blended yarn sewn to a durablepolyester backing. Absorbent yarn provides excellent dust retention. Natural yarn is standard.

Also available in blue.

5" BackSewnItem Yarn Pack Case Case

Brand Number Size Color Case Weight CubeWilen C057018 18" Natural 12 12.00 lbs. 1.290

Wilen C057024 24" Natural 12 15.00 lbs. 1.290




Wilen C058018 18" Blue 12 12.00 lbs. 1.290

Wilen C058024 24" Blue 12 15.00 lbs. 1.290

Wilen C058036 36" Blue 12 22.00 lbs. 1.812

Wilen C058048 48" Blue 12 30.00 lbs. 2.265

Wilen C058060 60" Blue 6 18.00 lbs. 1.812

4-ply


Sewn Backing

PERMA-LOOP™

High-grade, cotton blend looped-end yarn won’t fray or unravel even with intensive laundering,ensuring longer life than conventional cut-end yarn. Long loops are for maximum dust

collection. 5" wide backing.

5" BackLong LoopItem Yarn Pack Case Case






Wilen C042018 18" Blue 12 12.00 lbs. 1.290

Wilen C042024 24" Blue 12 15.00 lbs. 1.812

Wilen C042036 36" Blue 12 22.00 lbs. 2.265

Wilen C042048 48" Blue 12 30.00 lbs. 2.265

Wilen C042060 60" Blue 6 18.00 lbs. 1.812


Sewn Backing

029_057 9/18/10 8:19 AM Page 38

479

479


41







4-ply

Open back with ties standard.

Tufted BackingVALUE LINE™

This economical, yet durable dust mop is constructed with 4-ply, long staple cotton yarn whichis tufted into white polyester backing, providing more yarn for better dust collection. Openback style with ties. Natural yarn only.

MICROLOOPED DUST MOP

This mop will pick up twice as much dirt as a 100% cotton cut-end dust mop. Can be usedas a wax application mop. Fits any standard dust mop frame. Launder up to 150 times.

Item Pack Case CaseBrand Number Size Color Case Weight CubeWilen C090018 18" x 5" Blue 12 4.50 lbs. 0.810

Wilen C090024 24" x 5" Blue 12 6.00 lbs. 1.070

Wilen C090036 36" x 5" Blue 12 8.00 lbs. 1.600

Wilen C090048 48" x 5" Blue 6 5.50 lbs. 1.070

C091018

C092036

Microfiber Dust Mops

C138024

C143018

MICROLOOPED MICROFIBER VELCRO & CANVAS BACKED DUST MOPS

Microfiber dust mops pick up dirt and dust electrostatically. These mops are more efficient andlast longer than typical cotton/blended dust mops. Microfiber dust mops are available in bothconventional keyhole style backing that accepts industry standard dust mop frames, as well ashook and loop backing for velcro frames.

VELCRO BACKEDItem Pack Case Case

Brand Number Size Color Case Weight CubeWilen C091018 5" x 18" Blue/Grey 12 4.00 lbs. 1.039

Wilen C091024 5" x 24" Blue/Grey 12 5.00 lbs. 1.039


CANVAS BACKEDWilen C092018 5" x 18" Blue/Grey 12 5.50 lbs. 1.039





FRINGED MOP & FRINGED MOP w/SCRUB

Made of 100% Microfiber. Flat mops can be used in wet or dry applications. Looped-end edgestyles are available in cut-end center with scrubs for scuff marks and looped-end center forscrubbing. Both flat mops accept Velcro® frames.

FRINGED MOP w/SCRUBItem Pack Case Case

Brand Number Size Color Case Weight CubeWilen C133018 5" x 18" Blue 12 5.50 lbs. 0.247

Wilen C133024 5" x 24" Blue 12 6.00 lbs. 0.328

Wilen C138018 5" x 18" Green 12 5.50 lbs. 0.247


FRINGED MOPWilen C143018 5" x 18" Blue 12 5.50 lbs. 0.247

Wilen C143024 5" x 24" Blue 12 6.00 lbs. 0.328



029_057 9/18/10 8:19 AM Page 39

480

480

42

E-LINE TIE-FREE™ DISPOSABLE

4-ply Cotton/Synthetic yarn with polyester backing for performance, durability and value. Splitcenter provides a trap to collect dust and dirt. Available pre-treated with Dust n’ Shine™ or

untreated. Use with Swivel Snap™ frame and handle.

5" BackUntreatedItem Yarn Pack Case Case






5" BackTreatedItem Yarn Pack Case Case






4-ply

Polyester Slot pocket standard.

Disposable Dust Mops

TIE-FREE™ DISPOSABLE

Cotton/synthetic yarn with Tie-Free™ backing provides performance, durability and value.Bulky, absorbent, pre-treated 4-ply yarn collects and retains more dust and will cover over amillion square feet before replacement is needed. Split center provides a trap to collect even

more dust.







JEAN CLEAN™ DISPOSABLE

Yarn is constructed of reconditioned denim and other textile materials, making it moredurable and absorbent than standard cotton blended yarn. Plus, no break-in period is

required. Cotton/polyester 4-ply yarn prevents fraying and tough Tie-Free™ backing providesperformance and durability. Colored yarn hides dirt.


Brand Number Size Color Case Weight CubeWilen C412018* 18" Blue 12 10.00 lbs. 1.290

Wilen C412024 24" Blue 12 13.00 lbs. 1.812

Wilen C412036* 36" Blue 12 17.00 lbs. 1.812

Wilen C412048* 48" Blue 12 21.00 lbs. 2.265

Wilen C412060* 60" Blue 6 12.00 lbs. 1.812


4-ply

Polyester Tie-free backing standard.

Pre-treated with Dust n’ Shine™.

4-ply

Polyester Tie-free backing standard.


029_057 9/18/10 8:19 AM Page 40

481

481


43

Roll-Out™ Dust Control

ROLL-OUT™ DISPOSABLE

40' roll of disposable dust mop. Pre-treated, open twist, blended cotton/synthetic yarn is sewnto a Tie-Free backing. Knife included for cutting to size to fit holder. Available in Stick-M™ andTie-Free™ backing styles.

Stick-M™Item Yarn Pack Case Case

Brand Number Size Color Case Weight CubeWilen C601000 40' Natural 1 16.00 lbs. 1.636

Dust Mop Frames & Handles

SWIVEL SNAP™ FRAME

These heavy-duty, industry standard frames are constructed of rust resistant black powdercoated metal wire for long life. Swivel Snap™ frame features welded one-piece construction.Use with our Swivel Snap™ Handle.

Item Pack Case CaseBrand Number Width Length Case Weight CubeWilen C702012 5" 12" 12 5.00 lbs. 0.218

Wilen C702018 5" 18" 12 8.00 lbs. 0.302

Wilen C702024 5" 24" 12 11.00 lbs. 0.452

Wilen C702036 5" 36" 12 14.00 lbs. 0.615

Wilen C702048 5" 48" 12 17.00 lbs. 0.849

Wilen C702060 5" 60" 12 20.00 lbs. 1.059

Wilen C702072 5" 72" 12 25.00 lbs. 1.269

Tie-Free™Item Yarn Pack Case Case

Brand Number Size Color Case Weight CubeWilen C630000 40' Natural 1 16.00 lbs. 1.636

Triangle Dust Mops

TRIANGLE DUST MOP

This small duster lies flat for use in tight areas like offices and classrooms. Removable mophead is launderable and is available with standard cotton blend yarn. 4" x 81⁄2" wire frameattached to 54" wood handle. Yarn spread measures 12" x 17". Optional Frame & Connectorallows use of any standard threaded handle.

Item Yarn Pack Case CaseBrand Number Item Color Case Weight CubeWilen C501000 Refills Natural 12 6.00 lbs. 0.564

Wilen C903000 Frame & Handle N/A 12 15.00 lbs. 2.620

Item Pack Case CaseBrand Number Item Case Weight CubeWilen C707000 Frame & Connector 12 7.00 lbs. 2.506

Stick-M™ shown.


4-ply

15/16" x 54"

029_057 9/18/10 8:19 AM Page 41

482

482

SWIVEL SNAP™ HANDLE

The regular Swivel Snap™ handle features 180˚ swivel action or rigid position and spring clip.Shafts are available in wood and fiberglass.

Item Pack Case CaseBrand Number Handle Size Case Weight CubeWilen C801060 Wood 1" x 60" 12 25.00 lbs. 1.100

Wilen C801260 Fiberglass 1" x 60" 12 25.00 lbs. 1.100

WEAR-EVER™ PLASTIC FRAME

High-impact plastic frame won’t rust or bend and lasts up to ten times longer than metalframes. Flat bottom allows better surface contact with dust mop, resulting in superior perform-

ance. Also eliminates the stress points common to wire frames that cause premature mopwear. Use with our Swivel Snap™ handle.

7"

3"


STICK-M™ HOLDER

High-impact plastic frame features Velcro® on bottom for quick and easy attachment of refills.Flat bottom allows total surface contact with dust mop for superior dust collection.

Uses Swivel Snap™ handles.


44

029_057 9/18/10 8:19 AM Page 42

483

483


45

About Our Tough, Long-Lasting Floor Maintenance Pads

Our Conventional Speed floor pads are resilient, long lasting and easy to clean. Manufactured to exceed industry standards, our pads deliver superb cleaning time after time.

A pad for every use:All floor maintenance pads illustrated and described are designed and produced to give superior performance on specific floor surfaces. They can be used wet or dry with conventional or high speed machines in institutional, commercial or industrial applications.

Manufactured to stringent standards:All polyester floor and hand pads are manufactured with 100% recycled fiber. Pads are bonded with a tough, strong, elastic synthetic resin and impregnated with abrasives. The specific types of fibers and abrasives used are related to the aggressiveness required for the particular floor maintenance procedure.

Built-in resiliency:Each pad is designed and constructed to provide thorough and continuous contact with floor surface. Open web construction enables easier dirt pick-up and permits faster pad cleaning under running water. All pads are usable on both sides with equal effectiveness.

Designed and manufactured to fit all machines:Thick line pads are manufactured in sizes from 7 3/4" to 32" in diameter. They are supplied with a center hole punch-out plug or with a bolt hole for selective high speedburnishers.

Manufactured by Glit®:Unless otherwise noted, all products on pages 46-57 are manufactured by Glit®.

Ultra High Speed floor padsmaximize the appearance ofany floor care program. Ourextensive line gives you theflexibility to mix and matchour pads with any machineand floor finish.

Conventional Thickline / Ultra Valuline® PadsAll floor maintenance pads are color-coded for easy identification. Manufactured for use with machines thatoperate at 175-350 RPM.

Emerald II- Safire ® 66 Black- Brown- Green- Blue- Red- Coral- Tan- White-Stripping: Stripping: Stripping: Stripping: Scrubbing: Cleaner: Buffing: Pre-Burnishing: Buff Polishing: Super Polish:Durable and Highly For long For fast, Wet, Wet, medium- For dry For use with For dry polishing For dry aggressive abrasive for lasting, uniform heavy-duty duty scrubbing. buffing, spray automatic buffable synthetic polishing for the maximum heavy-duty stripping, scrubbing. buffing or scrubbers. synthetic finishes. or with fine toughest stripping stripping. wet or dry. light-duty water mist stripping power. scrubbing. to ensure

high gloss

029_057 9/18/10 8:19 AM Page 43

484

484

46

STRIPPING PADS ~ Use on Machines Operating at 175-350 R.P.M.

Emerald II Safire® 66Item Case Case Item Case Case

Size Number Weight Cube Number Weight Cube13" 43213 2.00 lbs. 0.669 23454 2.00 lbs. 0.669

14" 43214 2.60 lbs. 0.669 23476 2.40 lbs. 0.669

15" 43215 3.40 lbs. 0.867 23477 3.00 lbs. 0.867

16" 43216 3.80 lbs. 0.867 23478 3.40 lbs. 0.867

17" 43217 4.28 lbs. 1.089 23455 3.53 lbs. 1.089

18" 43218 4.60 lbs. 1.089 23471 4.20 lbs. 1.089

19" 43219 5.20 lbs. 1.354 23466 4.72 lbs. 1.354

20" 43220 5.80 lbs. 1.354 23438 5.04 lbs. 1.354

21" 43221 6.20 lbs. 1.611 23479 5.80 lbs. 1.611

22" 43222 6.40 lbs. 1.611 23589 6.00 lbs. 1.611

23" 43223 6.60 lbs. 1.911 - - - - - - - - -

24" 43224 6.80 lbs. 1.911 - - - - - - - - -

14" x 20" 24426 5.30 lbs. 1.354 24429 3.57 lbs. 1.354

14" x 28" 24427 7.45 lbs. 2.608 24430 5.00 lbs. 2.608

14" x 32" 24428 8.50 lbs. 3.388 24431 7.00 lbs. 3.388

Black BrownItem Case Case Item Case Case


14" 20008 2.60 lbs. 0.669 20242 2.16 lbs. 0.669

15" 20009 3.28 lbs. 0.867 20243 2.35 lbs. 0.867

16" 20010 3.76 lbs. 0.867 20260 2.62 lbs. 0.867

17" 20011 4.04 lbs. 1.089 20244 2.84 lbs. 1.089

18" 20012 4.56 lbs. 1.089 20245 3.40 lbs. 1.089

19" 20013 5.00 lbs. 1.354 20246 4.00 lbs. 1.354

20" 20014 5.68 lbs. 1.354 20247 4.80 lbs. 1.354

21" 20015 6.04 lbs. 1.611 20248 5.10 lbs. 1.611

22" 20016 6.10 lbs. 1.611 20249 5.30 lbs. 1.611

23" 20017 6.50 lbs. 1.911 20250 5.50 lbs. 1.911

24" 20018 6.70 lbs. 1.911 20251 6.10 lbs. 1.911

14" x 20" 24406 5.07 lbs. 1.354 - - - - - - - - -

14" x 28" 24407 7.10 lbs. 2.608 - - - - - - - - -

14" x 32" 24408 8.11 lbs. 3.336 - - - - - - - - -

EMERALD II STRIPPING PADFiber Type: Polyester/Blend Resin: Acrylic/Urethane Grit: Aluminum Oxide

Aggressive, heavy-duty pad for maximum wet stripping performance. Quickly cuts through oldfinish, dirt and build-up.

SAFIRE® 66 STRIPPING PADFiber Type: Polyester/Blend Resin: SBR/Acrylic Grit: Aluminum Oxide

Highly abrasive and tear resistant for maximum stripping power. Quickly cuts through old finish,dirt and build-up. Durable and tough for increased efficiency.

BLACK STRIPPING PADFiber Type: Polyester/Blend Resin: SBR/Acrylic Grit: Aluminum Oxide

Aggressive, heavy-duty pad for wet stripping performance. Quickly cuts through old finish,dirt and build-up. High resiliency helps to conform to uneven floors.

BROWN STRIPPING PADFiber Type: Polyester/Blend Resin: SBR/Acrylic Grit: Aluminum Oxide

Slightly less aggressive wet stripping pad. Quickly cuts through old finish, dirt and build-up.High resiliency helps to conform to uneven floors.

INTENDED USE:To remove floor finish and soil prior to applying new floor finish. Can be used on mostresilient and stone floors that have a topical coating.

NOT INTENDED FOR USE:On linoleum or marble. Always follow proper floor stripping guidelines.

UNLESS OTHERWISE NOTED IN CHART:Floor pads have a 3.25" Center Hole and come 5 per Case Pack. Round pads areavailable in smaller sizes upon request.

029_057 9/18/10 8:19 AM Page 44

485

485


47

SCRUBBING PADS ~ Use on Machines Operating at 175-350 R.P.M.

MULTI-PURPOSE, DAILY MAINTENANCE PAD ~ Use on Machines Operating at 175-1,500 R.P.M.

Green BlueItem Case Case Item Case Case


14" 20125 2.40 lbs. 0.669 20203 1.72 lbs. 0.669

15" 20126 2.60 lbs. 0.867 20204 2.08 lbs. 0.867

16" 20127 2.80 lbs. 0.867 20205 2.40 lbs. 0.867

17" 20128 3.00 lbs. 1.089 20206 2.60 lbs. 1.089

18" 20129 3.93 lbs. 1.089 20207 2.90 lbs. 1.089

19" 20130 4.52 lbs. 1.354 20208 3.10 lbs. 1.354

20" 20131 4.63 lbs. 1.354 20209 3.40 lbs. 1.354

Green BlueItem Case Case Item Case Case


22" 20133 5.00 lbs. 1.611 20211 4.00 lbs. 1.611

23" 20134 5.30 lbs. 1.911 20212 4.20 lbs. 1.911

24" 20135 6.00 lbs. 1.911 20213 4.50 lbs. 1.911

14" x 20" - - - 3.60 lbs. 1.354 24409 3.07 lbs. 1.354

14" x 28" - - - 5.00 lbs. 2.608 24410 4.30 lbs. 2.608

14" x 32" - - - 5.70 lbs. 3.388 24411 4.91 lbs. 3.388

GREEN SCRUBBING PADFiber Type: Polyester/Blend Resin: SBR/Urethane Grit: Aluminum Oxide

Heavy-duty, deep scrubbing pad is ideal for scrub and recoat applications. Removes worn ordamaged floor finish.

BLUE CLEANER PADFiber Type: Polyester/Blend Resin: SBR/Acrylic Grit: Aluminum Oxide

Moderate scrubbing pad for scrub and recoat applications or light wet spray cleaning of floorsprior to burnishing and polishing.

INTENDED USE: To provide a clean and attractive condition to all hard surface floors and prepare floorsfor a fresh coat of finish.


CORAL PRE-BURNISHING PADFiber Type: Polyester Blend Resin: SBR/Acrylic Grit: Talc

A great alternative often used to simplify daily maintenance programs by reducing the need fornumerous pads. Works well with all floor types.

INTENDED USE: The Multi-Purpose Coral Pad can be used for daily light cleaning, dry or wet spray buffingand for burnishing applications. A virtual “mistake-free” alternative for daily maintenanceprograms. Can also be used on Automatic Scrubbers.


CoralItem Case Case

Size Number Weight Cube13" 25513 1.60 lbs. 0.669

14" 21512 1.81 lbs. 0.669

15" 25515 2.20 lbs. 0.867

16" 25516 2.35 lbs. 0.867

CoralItem Case Case


18" 25518 3.10 lbs. 1.089

20" 25520 3.40 lbs. 1.354

CoralItem Case Case


22" 25522 3.75 lbs. 1.611

24" 25524 4.10 lbs. 1.911

029_057 9/18/10 8:19 AM Page 45

486

486

48

BUFFING PADS ~ Use on Machines Operating at 175-350 R.P.M.

RED SPRAY BUFFING PADFiber Type: Polyester/Blend Resin: SBR/Acrylic Grit: Talc

A conventional, multi-purpose pad for wet and dry buffing and daily cleaning.

TAN BUFF POLISHING PADFiber Type: Polyester Resin: SBR/Acrylic Grit: Talc

A conventional spray buff pad made with rubberized resins for wet or dry buffing.

WHITE SUPER POLISHING PADFiber Type: Polyester Resin: SBR/Acrylic Grit: Talc

A non-aggressive pad for polishing a clean, dry floor.

INTENDED USE:RED: Ideal for spray buffing and daily cleaning to remove soil and provide a clean, sanitary

and attractive condition to hard floor surfaces.WHITE: For wet or dry buffing soft floor finish.

TAN: For use with floor finish that requires wet or dry buffing.

UNLESS OTHERWISE NOTED IN CHART:Floor pads have a 3.25" Center Hole and come 5 per Case Pack. Round pads are available

in smaller sizes upon request.

Red White TanItem Case Case Item Case Case Item Case Case

Size Number Weight Cube Number Weight Cube Number Weight Cube13" 20046 1.60 lbs. 0.669 14413 1.40 lbs. 0.669 13313 1.55 lbs. 0.669

14" 20047 1.80 lbs. 0.669 14414 1.60 lbs. 0.669 13314 1.67 lbs. 0.669

15" 20048 2.33 lbs. 0.867 14415 1.78 lbs. 0.867 13315 2.00 lbs. 0.867

16" 20049 2.16 lbs. 0.867 14416 1.92 lbs. 0.867 13316 2.16 lbs. 0.867

17" 20050 2.28 lbs. 1.089 14417 2.10 lbs. 1.089 13317 2.20 lbs. 1.089

18" 20051 3.05 lbs. 1.089 14418 2.40 lbs. 1.089 13318 2.50 lbs. 1.089

19" 20052 3.20 lbs. 1.354 14419 2.48 lbs. 1.354 13319 2.96 lbs. 1.354

20" 20053 3.40 lbs. 1.354 14420 2.80 lbs. 1.354 13320 3.16 lbs. 1.354

21" 20054 3.80 lbs. 1.611 14421 3.00 lbs. 1.611 13321 3.30 lbs. 1.611

22" 20055 4.20 lbs. 1.611 14422 3.35 lbs. 1.611 13322 3.50 lbs. 1.611

23" 20056 4.40 lbs. 1.911 14423 3.70 lbs. 1.911 13323 3.60 lbs. 1.911

24" 20057 4.60 lbs. 1.911 14424 3.90 lbs. 1.911 13324 3.80 lbs. 1.911

27" - - - - - - - - - - - - - - - - - - *13337 2.00 lbs. 1.165

27" - - - - - - - - - - - - - - - - - - *13327 2.00 lbs. 1.165

28" - - - - - - - - - - - - - - - - - - *13328 2.10 lbs. 1.165

12" x 18" - - - - - - - - - - - - - - - - - - 13338 2.50 lbs. 1.089

14" x 20" 24420 2.82 lbs. 1.354 24423 2.70 lbs. 1.354 - - - - - - - - -

14" x 28" 24421 3.22 lbs. 2.608 24424 3.80 lbs. 2.608 - - - - - - - - -

14" x 32" 24422 4.51 lbs. 3.388 24425 4.30 lbs. 3.336 - - - - - - - - -

*13327 & *13328 COME 2 PER CASE. *13337 HAS A .25" BOLT HOLE & COMES 2 PER CASE.

029_057 10/1/10 4:19 AM Page 46

487

487


49

Ultra High Speed Burnishing PadsEveryone wants to know more about the wet-look shine and how to obtain it. As a supplier of floor maintenance pads for the sanitary maintenance and supply market, we have beenactively supporting research being conducted by machine and finish manufacturers, distributors and end users in an effort to determine exactly what type of pads are needed. Results ofthis research indicate a need for more than one type of floor pad, because floor surfaces and preparation procedures are not all the same - they vary with the type of finish used, machinepad weight and environmental condition. It has been determined that a series of specially manufactured pads with varying degrees of aggressiveness should be made available to end users.A selection from the 14 pads below will produce and maintain the wet-look shine on various floor surfaces utilizing the different types of finishes and machines operating at 1,000 to 3,000 R.P.M.

Blue Ice®

For a deep and lasting shine. Soft binderswith fine synthetic fiber create a “super soft”pad for dry burnishing. Use where burnishingis required on a frequent basis for more timebetween re-coatings.

Beige LiteA moderately soft burnishing pad for a highgloss on softer finishes.

Beige Poly ThermalRubberized coating for superior tensilestrength and heat-generating capabilities.Soft to medium finishes.

UHS AquaSuperior soft pad that lightly polishes the floorfor a high gloss appearance.

Joey® SpecialtyA super soft pad that is designed for softbuffable finishes.

ChampagneA soft-textured pad with a rubberized binderfor dry burnishing and buffing for a high gloss.

UHS TanMinimize machine drag while producing awet look gloss. Especially effective onmedium to hard finishes.

Jackeroo® LiteThis exceptional floor pad effectively combinesnatural hair and fiber in a new, advanced way,bringing out the gloss on softer, more buffablefloor finishes. It’s the ultimate UHS tool.

Jackeroo®

A blend of synthetic fibers and natural hair.Pad lasts longer with the added benefit ofthe lubricating effect of a hair pad.

Buckaroo®

A natural hair burnishing pad with binderthat is hard and aggressive. Ideal forelectric and battery powered machines upto 3,000 R.P.M.

CocoPad®

Pad has natural lubricating factors - pad isboth organic and biodegradable.

PeachA mildly aggressive spray buffing pad that isan excellent cleaner and shiner. Can be usedwith an automatic scrubber for cleaning foruse up to 1,500 R.P.M.

100-D Neutral Poly ThermalAggressive burnishing pad to use onmedium to hard finishes with machinespeeds of 1,500 to 3,000 R.P.M.

029_057 9/18/10 8:19 AM Page 47

488

488

50

BURNISHING PADS ~ Use on Machines Operating at 1,000-3,000 R.P.M.

Blue Ice® Beige Lite Beige P.T. UHS Aqua Joey®Item Case Case Item Case Case Item Case Case Item Case Case Item Case Case

Size Number Weight Cube Number Weight Cube Number Weight Cube Number Weight Cube Number Weight Cube17" 29772 2.60 lbs. 1.089 20283 2.20 lbs. 1.089 15117 2.48 lbs. 1.089 13517 2.50 lbs. 1.089 20478 2.20 lbs. 1.089

18" 29773 2.72 lbs. 1.089 20284 2.70 lbs. 1.089 15118 2.80 lbs. 1.089 13518 2.65 lbs. 1.089 - - - - - - - - -

19" 29774 2.87 lbs. 1.354 20285 2.90 lbs. 1.354 15119 3.20 lbs. 1.354 13519 2.80 lbs. 1.354 - - - - - - - - -

19.5" 29780 3.10 lbs. 1.354 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

20" 29754 3.15 lbs. 1.354 20286 3.13 lbs. 1.354 15120 3.32 lbs. 1.354 13520 3.00 lbs. 1.354 20481 2.60 lbs. 1.354



23" 29776 3.50 lbs. 1.911 20289 4.20 lbs. 1.911 15123 4.10 lbs. 1.911 - - - - - - - - - 20484 3.45 lbs. 1.911


25" *29777 2.50 lbs. 1.165 *20291 2.00 lbs. 1.165 - - - - - - - - - - - - - - - - - - *20486 2.00 lbs. 1.165

26" - - - - - - - - - *20292 2.20 lbs. 1.175 - - - - - - - - - - - - - - - - - - *20487 2.20 lbs. 1.175

27" 29781 7.50 lbs. 2.608 - - - - - - - - - - - - - - - - - - 13557 7.00 lbs. 2.608 - - - - - - - - -

27" - - - - - - - - - *20298 2.00 lbs. 1.165 *15127 2.10 lbs. 1.165 *13527 2.80 lbs. 1.165 *20488 2.50 lbs. 1.165

27" *29785 3.00 lbs. 1.165 *20309 2.00 lbs. 1.165 - - - - - - - - - *13537 2.70 lbs. 1.165 *20504 2.50 lbs. 1.165

28" 29787 7.80 lbs. 2.608 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

28" *29779 3.20 lbs. 1.165 *20294 2.50 lbs. 1.165 *15128 2.20 lbs. 1.165 *13528 2.80 lbs. 1.165 *20489 2.70 lbs. 1.165

14" x 20" 24412 2.60 lbs. 1.354 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

14" x 28" 24413 4.20 lbs. 2.608 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

14" x 32" 24414 6.20 lbs. 3.336 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

*13528, *15128, *20291, *20292, *20294, *20486, *20487, *20489, * 29777 & *29779 COME 2 PER CASE. *13537, *20309, *20504 & *29785 HAVE A .25" BOLT HOLE & COME 2 PER CASE.

*13527, *15127, *20298 & *20488 HAVE A .25" BOLT HOLE & COME 5 PER CASE.

BLUE ICE® BURNISHING PADFiber Type: Polyester Resin: SBR/Acrylic Grit: Talc

This pad is super soft for dry burnishing.

BEIGE LITE BURNISHING PADFiber Type: Polyester/Blend Resin: SBR/Acrylic Grit: Kaolin

This pad specially blends fibers, resin and a binder to produce a medium soft pad.

BEIGE POLY THERMAL BURNISHING PADFiber Type: Polyester/Blend Resin: SBR/Acrylic Grit: Kaolin

This pad is a special blend of fibers, resin and a binder that produce a medium soft pad.

UHS AQUA BURNISHING PADFiber Type: Polyester Resin: SBR/Acrylic Grit: Talc

This pad is a special blend of fibers, resin and a binder that produce a soft pad.

INTENDED USE:For use with floor finish where frequent (4+ times a week) to moderate

(2-3 times per week) UHS burnishing is recommended.

UNLESS OTHERWISE NOTED IN CHART:Floor pads have a 3.25" Center Hole and come 5 per Case Pack. Round pads are

available in smaller sizes upon request.

JOEY® SPECIALTY BURNISHING PADFiber Type: Polyester Resin: SBR/Acrylic Grit: Kaolin

This pad specially blends fibers, resin and binder to produce a soft pad.

029_057 9/18/10 8:19 AM Page 48

489

489


51

CHAMPAGNE BURNISHING PADFiber Type: Polyester/Blend Resin: SBR/Acrylic Grit: Kaolin

Rubberized resins combine with fine synthetic fibers to create a soft textured floor pad that canbe used for dry UHS burnishing or buffing.

JACKEROO® LITE NATURAL HAIR PADFiber Type: Polyester/Blend & Straight Hog’s Hair Resin: SBR/Acrylic Grit: Kaolin

This pad is a lighter mix of natural hair which quickly and easily produces an exceptional gloss.

BUCKAROO® NATURAL HAIR PADFiber Type: Polyester/Hog’s Hair Resin: SBR/Acrylic Grit: Kaolin

This pad is made of animal hair with a hard and aggressive binder.

JACKEROO® NATURAL HAIR PADFiber Type: Polyester/Blend w/ Hog Hair Resin: SBR/Acrylic Grit: Kaolin

This pad is a blend of natural hair and synthetic fibers with the lubrication effect of a hair padand rubberized binder.

UHS TAN BURNISHING PADFiber Type: Polyester Resin: SBR/Acrylic Grit: Talc

This pad reduces machine drag for all types of finishes.

INTENDED USE:Recommended for use with floor finish where moderate (2-3 times per week) toinfrequent (1 time per week) UHS burnishing is required to produce a clean, shiny andsafe floor.CHAMPAGNE: Infrequent or ModerateTAN: Infrequent to ModerateJACKEROO LITE: ModerateJACKEROO: Infrequent to ModerateBUCKAROO: Infrequent


Champagne UHS Tan Jackeroo® Jackeroo® Buckaroo®Item Case Case Item Case Case Lite Item Case Case Item Case Case Item Case Case

Size Number Weight Cube Number Weight Cube Number Weight Cube Number Weight Cube Number Weight Cube17" 20322 2.24 lbs. 1.089 13917 2.20 lbs. 1.089 20439 2.08 lbs. 1.089 20400 2.00 lbs. 1.089 20361 2.40 lbs. 1.089

18" 20323 2.60 lbs. 1.089 13918 2.80 lbs. 1.089 - - - - - - - - - - - - - - - - - - 20362 2.84 lbs. 1.089




22" 20327 3.87 lbs. 1.611 13922 3.75 lbs. 1.611 - - - - - - - - - 20405 3.60 lbs. 1.611 20366 4.48 lbs. 1.611

23" 20328 4.50 lbs. 1.911 - - - - - - - - - - - - - - - - - - - - - - - - - - - 20367 4.65lbs. 1.911

24" 20329 4.80 lbs. 1.911 13924 4.00 lbs. 1.911 - - - - - - - - - 20407 4.20 lbs. 1.911 20368 4.80 lbs. 1.911

25" *20330 2.80 lbs. 1.165 - - - - - - - - - - - - - - - - - - *20408 2.78 lbs. 1.165 *20369 3.10 lbs. 1.165

26" *20331 3.00 lbs. 1.175 *13926 3.00 lbs. 1.175 - - - - - - - - - *20409 2.89 lbs. 1.175 *20370 3.30 lbs. 1.175

27" - - - - - - - - - 13957 6.25 lbs. 2.608 - - - - - - - - - - - - - - - - - - - - - - - - - - -

27" - - - - - - - - - - - - - - - - - - *20466 4.87 lbs. 2.429 - - - - - - - - - *20386 7.50 lbs. 2.608

27" - - - - - - - - - *13927 3.00 lbs. 1.165 - - - - - - - - - *20410 3.00 lbs. 1.165 - - - - - - - - -



*13926, *13927, *13928, *20330, *20331, *20333, *20369, *20370, *20372, *20386, *20408, *20409, *20410, *20411 & *20450 COME 2 PER CASE.

*15137, *20348, *20387, *20426 & *20465 HAVE A .25" BOLT HOLE & COME 2 PER CASE. *20466 HAS A .25" BOLT HOLE & COMES 5 PER CASE.

029_057 9/18/10 8:19 AM Page 49

490

490

52

BURNISHING PADS ~ Use on Machines Operating at 175-3,000 R.P.M.

INTENDED USE:Recommended for use with floor finish where moderate (2-3 times per week) to

infrequent (1 time per week) UHS burnishing is required.

UNLESS OTHERWISE NOTED IN CHART:Floor pads have a 3.25" Center Hole and come 5 per Case Pack. Round pads are available

in smaller sizes upon request.

PEACH PADFiber Type: Polyester/Blend Resin: SBR/Acrylic Grit: Talc

This mildly aggressive pad is designed for UHS burnishing as well as spray buffing applications.This pad can be used on machines operating at 175 to 1,500 R.P.M.

100-D NEUTRAL POLY THERMAL PADFiber Type: Polyester/Blend Resin: SBR/Acrylic Grit: Kaolin

This pad blends fibers, resins and binders to produce a medium-soft pad.

Peach 100-DItem Case Case Item Case Case


18" 20518 2.52 lbs. 1.089 44818 2.70 lbs. 1.089

19" 20519 2.85 lbs. 1.354 44819 2.80 lbs. 1.354

20" 20520 3.00 lbs. 1.354 44820 3.11 lbs. 1.354

21" 20521 3.15 lbs. 1.611 44821 3.68 lbs. 1.611

Peach 100DItem Case Case Item Case Case

Size Number Weight Cube Number Weight Cube22" 20522 3.30 lbs. 1.611 - - - - - - - - -

24" 20524 3.60 lbs. 1.911 44824 5.15 lbs. 1.911

27" - - - - - - - - - *44827 2.50 lbs. 1.165

27" *20543 2.24 lbs. 1.165 - - - - - - - - -

28" 20528 5.80 lbs. 2.608 *44828 2.55 lbs. 1.165

INTENDED USE:Recommended for use with floor finish where UHS burnishing or spray buffing is

performed frequently (4+ times per week) or moderately (2-3 times per week) toproduce a clean, shiny and safe floor.

UNLESS OTHERWISE NOTED IN CHART:Floor pads have a 3.25" Center Hole and come 5 per Case Pack. Round pads are

available in smaller sizes upon request.

COCOPAD®Fiber Type: Polyester & Coconut Fiber Resin: SBR/Acrylic Grit: Talc

This is a naturally lubricating fiber pad for UHS burnishing. The coconut fibers are bothorganic and biodegradable.

CoCoPad®Item Case Case


18" 24006 2.73 lbs. 1.089

19" 24007 2.88 lbs. 1.354

20" 24008 3.00 lbs. 1.354

21" 24009 3.15 lbs. 1.611



23" 24011 4.10 lbs. 1.911

24" 24012 4.27 lbs. 1.911

26" *24014 1.90 lbs. 1.175

27" *24016 2.80 lbs. 1.165


Size Number Weight Cube27" *24015 2.80 lbs. 1.165

28" *24017 2.90 lbs. 1.165

28" *24018 2.90 lbs. 1.165

*24014, *24016 & *24017 COME 2 PER CASE. *24015 & *24018 HAVE A .25" BOLT HOLE & COME 2 PER CASE.

*44827 & *44828 COME 2 PER CASE. *20543 HAS A .25" BOLT HOLE & COMES 2 PER CASE.

029_057 9/18/10 8:19 AM Page 50

491

491


53

WOOD FLOOR PADS ~ Use on Machines Operating at 175-350 R.P.M.

FLOOR PAD USAGE TIPS

NOT INTENDED FOR USE:On linoleum or marble. Always follow proper floor stripping guidelines.

GENERAL INFORMATION:Floor pads have a 3.25" Center Hole and come 10 per Case Pack. Round pads areavailable in smaller sizes upon request.

MAROON WOOD SURFACING PADFiber Type: Polyester /Blend Resin: SBR/Acrylic Grit: Aluminum Oxide

Designed for wood floor cleaning with minimal coating removal.

WHAT IS IN A FLOOR PAD?There are four main components used to produce any type of floor pad. These include: fiber, binder, abrasives and pigment or color. When you are

helping your customers select the best floor care program customized for their situation, it is very helpful to understand the basic components of each

floor pad and why some are better suited for different floor types, machine applications, etc. In addition to the information contained in this brochure,

please contact your Glit® Sales Representative for more detailed information available on our individual Product Specification Sheets.

HOW DO YOU CHOOSE THE PROPER AGGRESSIVENESS?This is a key driver for designing a successful floor care program. The proper combination of fiber, resin and abrasives are what determine the

aggressiveness of a floor pad. It is always best to use the least aggressive pad necessary to get the job done. Floor care can be both a science and an

art. While there are many guiding principles to use when choosing the right floor pad, the best approach is to test more than one pad to find the best fit.

The Floor Pad Usage Guide provided on page 5 is a great place to start.

WHY DO YOU WANT FLOOR PADS WITH AN OPEN WEB DESIGN?Floor pads made with an open web design offer many advantages, including but not limited to:

• Holds more stripper or cleaning solution, providing more efficiency

• Cushions the machine better, this helps prevent the machine from bottoming out

• Hugs uneven floors

• Excels at soil removal without clogging, preventing premature surface load

WHAT ELSE SHOULD YOU CONSIDER?Remember that floor pads are not the only determinant of success. The chemicals and equipment used, along with user competence and the floor itself

are all factors to consider when developing a floor care program. For assistance, contact your Glit® Distributor or Sales Representative for additional

expertise and guidance.

MaroonItem Case Case


14" 11514 2.70 lbs. 0.699

15" 11515 3.20 lbs. 0.853

16" 11516 3.60 lbs. 0.853

17" 11517 4.80 lbs. 1.089



19" 11519 5.40 lbs. 1.354

20" 11520 5.65 lbs. 1.354

21" 11521 5.80 lbs. 1.611

24" 11524 6.60 lbs. 1.911


Size Number Weight Cube14" x 20" 25685 3.00 lbs. 2.630

14" x 28" 25686 3.50 lbs. 2.630

14" x 32" 25687 4.00 lbs. 2.630

029_057 9/18/10 8:19 AM Page 51

492

492

54

Floor Pad Usage Guide

Emerald II Green Scrubbing Red Red Blue Ice Jackeroo CocoPad

Safire 66 Blue Cleaner White White Aqua CocoPad Buckaroo

Black Tan Jackeroo Lite Buckaroo Jackeroo

Brown Beige Lite Beige Lite Jackeroo Lite

Beige Beige Champagne

Joey Champagne Peach

Peach

Match the Correct Products to the Application and Powered Equipment

CONVENTIONAL FLOOR PADS UHS FLOOR PADS

Application

Floor Type

PoweredEquipment

Polymer

Floor PadOptions

Stripping Scrubbing Cleaning Spray Buffing UHS Burnishing UHS Burnishing UHS Burnishing(18-36 months) (Quarterly) (Daily) (1-5 x week) Frequent Moderate Infrequent

(4+ x week) (2-3 x week) (1 x week)

Resilient Floors Resilient Floors Resilient Floors Resilient Floors Resilient Floors Resilient Floors Resilient FloorsVCT, VAT, VCT, VAT VCT, VAT VCT, VAT VCT, VAT VCT, VAT VCT, VAT

Sheet Vinyl Sheet Vinyl Sheet Vinyl Sheet Vinyl Sheet Vinyl Sheet Vinyl Sheet Vinyl

Linoleum Linoleum

Non-Resilient Non-Resilient Non-Resilient Non-Resilient Non-Resilient Non-Resilient Non-ResilientFloors Floors Floors Floors Floors Floors Floors

Terrazzo, Granite, Terrazzo, Granite, Terrazzo, Granite, Terrazzo, Granite Terrazzo, Granite, Terrazzo, Granite, Terrazzo, Granite,

Concrete Concrete Concrete Concrete, Stone Concrete, Stone Concrete, Stone

Do not strip Note: 1500 RPM Note: 1500 RPM Note: Do notlinoleum max on linoleum max on linoleum strip linoleum

Standard Speed Standard Speed Standard Speed Standard Speed Propane, Battery, Propane, Battery, Propane, Battery,

Floor Machine Floor Machine Floor Machine Floor Machine Electric Burnishers Electric Burnishers Electric Burnishers

175-350 R.P.M. 175-350 R.P.M. 175-350 R.P.M. 175-350 R.P.M. 1,000-3,000 R.P.M. 1,000-3,000 R.P.M. 1,000-3,000 R.P.M.

- - - - - - - - - - - - Soft Moderate-Hard Hard

029_057 9/18/10 8:19 AM Page 52

493

493


55

Utility Pads & Holders

KLEENFAST® THICKLINE UTILITY PADS

LIGHT-DUTY - WHITEA light-duty pad for cleaning delicate surfaces and light cleanup on sinks, ceramic tile,windows, tubs and toilets.

MEDIUM-DUTY - BLUEUse to clean baseboards, swimming pool walls and for removing scuff marks on floors.

HEAVY-DUTY - BROWNFor heavily soiled traffic areas such as halls, stairs, around stoves and fryers. Easily removes old finish and wax build-up.

HEAVY-DUTY - BLACK

KLEENFAST® THICKLINE UTILITY PAD KITS

Kits contain one of three styles of Holders, along with one Brown and one White Pad.

Item Pack Case CaseNumber Size Color Case Weight Cube20968 41/2" x 10" White 4/5 2.20 lbs. 0.669

20967 41/2" x 10" Blue 4/5 2.80 lbs. 0.669

20969 41/2" x 10" Brown 4/5 2.40 lbs. 0.669

22508 41/2" x 10" Black 4/5 3.80 lbs. 0.669

Item Pack Case CaseNumber Item Case Weight Cube20972 Universal Swivel Holder Kit 4 Kits /cs. 4.20 lbs. 0.669

23217 Handblock Pad Holder Kit 4 Kits /cs. 4.00 lbs. 0.669

20983 Mini Handblock Holder Kit 4 Kits /cs. 4.00 lbs. 0.66920972

SAFIRE® 66 UTILITY PADFor stripping heavy wax build-up areas where machines can’t reach, such as baseboards and corners.

SAFIRE® 66 UTILITY PAD KITSKits contain one of three styles of Holders, along with two Safire® Pads.

EMERALD II UTILITY PADS - HEAVY-DUTYFor stripping heavy wax build-up areas where machines can’t reach, such as baseboards and corners.

EMERALD II UTILITY PAD KITSKits contain one of three styles of Holders, along with two Emerald II Pads.

KLEENFAST® PAD HOLDERS

Item Pack Case CaseNumber Item Case Weight Cube23554 Blue 31/2" x 6" Pads 4/10 3.00 lbs. 1.279

23553 Blue 41/2" x 10" Pads 4/10 5.00 lbs. 1.279

26067 Universal Swivel Holder Kit 4 Kits /cs. 5.00 lbs. 0.669


20985 Green 31/2" x 6" Pads 4/10 3.00 lbs. 1.279

20976 Green 41/2" x 10" Pads 4/10 6.00 lbs. 1.279

20978 Universal Swivel Holder Kit 4 Kits /cs. 5.50 lbs. 0.669


20986 Mini Handblock Holder Kit 4 Kits /cs. 5.50 lbs. 0.669

20931 Swivel Holder Universal 12 bulk 5.00 lbs. 0.669

20975 Handblock Pad Holder 12 bulk 5.00 lbs. 0.669

20984 Mini Handblock Holder 12 bulk 5.00 lbs. 0.66920984

20931

20975

An integrated system of six distinct utility pads and holders for a variety of cleaning jobs.

029_057 9/18/10 8:19 AM Page 53

494

494

56

Stripping Boots & Carpet Bonnets

Nylon /Polypropylene

Cotton

STRIPPING BOOTS

These stripping boots reduce your risk of slipping, while keeping your footwear dry and awayfrom harsh chemicals.

Item Pack Case CaseNumber Item Size Case Weight Cube23411 Kit: 1-Pair Protective Shoes Small (6-8) 1 Kit 1.80 lbs. 0.386

& 2-Pair Replacement Soles

23412 Kit: 1-Pair Protective Shoes Medium (8-91/2) 1 Kit 1.80 lbs. 0.386


23413 Kit: 1-Pair Protective Shoes Large (91/2-11) 1 Kit 2.20 lbs. 0.386


23414 Kit: 1-Pair Protective Shoes X-Large (11-14) 1 Kit 2.40 lbs. 0.386


23467 Kit: 3-Pair Replacement Soles Small 1 Kit 1.00 lbs. 0.386

23468 Kit: 3-Pair Replacement Soles Medium 1 Kit 1.00 lbs. 0.386

23469 Kit: 3-Pair Replacement Soles Large 1 Kit 1.20 lbs. 0.386

23470 Kit: 3-Pair Replacement Soles X-Large 1 Kit 1.20 lbs. 0.386

KING™ BONNETThis high profile bonnet has looped nylon/poly yarn for high absorption and durability.

KING™ COTTON BONNETThick profile pad with looped-end, small diameter cotton yarn provides maximum absorption.

QUEEN™ BONNETMedium profile pad is constructed of aggressive, yet absorbent, blended looped-end yarn for

extra durability. Ideal for medium to thick carpet. Available with aggressive scrubbing strips.

PRINCE™ BONNETThis low profile pad is for maximum agitation and tough jobs. Constructed of looped-end,

blended yarn, providing thorough cleaning and stable machine operation.

Item Pack Case CaseNumber Size Case Weight CubeN002017 Wilen 17" 6 12.00 lbs. 2.192

N002019 Wilen 19" 6 14.00 lbs. 2.192

N002021 Wilen 21" 6 16.00 lbs. 2.192


N006019 Wilen 19" 6 14.00 lbs. 2.192

N006021 Wilen 21" 6 16.00 lbs. 2.192


N007019 Wilen 19" 6 10.00 lbs. 1.689

N007021 Wilen 21" 6 11.00 lbs. 1.689


N009019 Wilen 19" 6 14.00 lbs. 1.701

N009021 Wilen 21" 6 16.00 lbs. 1.701

Rayon Polypropylene

Rayon

029_057 9/18/10 8:20 AM Page 54

495

495


57

Contour® Pads ~ Use on Machines Operating at 175-3,000 R.P.M.

ABSORBA™ BONNETThis bonnet is ideal for medium to thick pile carpet and high wet situations. Thick pile of

durable 6-ply, cut and loop yarn provides excellent absorption.

ROTOTECH™ BONNETMedium profile bonnet is constructed of nylon yarn. Very absorbent, blended, looped yarn is

extra durable. Ideal for medium to thick carpet.

QUEEN™ MITTGreat tool for cleaning spots, stairs and other small areas of carpet. Looped-end yarn

absorbs cleaning solution while the non-damaging cleaning strips agitate the fibers for

effective cleaning. Use with any common carpet cleaning solution. Highly launderable.


N010017 Wilen 17" 6 12.00 lbs. 2.192

N010019 Wilen 19" 6 14.00 lbs. 2.192

N010021 Wilen 21" 6 16.00 lbs. 2.192

Item Pack Case CaseNumber Size Case Weight CubeP00201500 Wilen 15" 4 7.00 lbs. 1.689

P00201700 Wilen 17" 4 8.00 lbs. 1.689


Nylon

Cotton / Rayon /Polyester

Polypropylene

Rayon

Item Pack Case CaseNumber Size Case Weight Cube23445 Wilen 17" 1 1.00 lbs. 0.145

23446 Wilen 19" 1 1.40 lbs. 0.178

23447 Wilen 20" 1 1.20 lbs. 0.178

23651 Wilen 27" 2 2.48 lbs. 1.165


24163 Wilen 19" 5 3.40 lbs. 1.354

24161 Wilen 20" 5 3.80 lbs. 1.354

24162 Wilen 27" 5 4.95 lbs. 2.608

DRY POLISH PAD

Use on any uneven or smooth surface with or without a buffable finish (marble, slateand resilient tile for example). Can also be used on propane machines operating at1,000-3,000 R.P.M. Machine washable.


24155 Wilen 14" 5 2.00 lbs. 0.669

24156 Wilen 17" 5 2.40 lbs. 1.089

24157 Wilen 19" 5 3.20 lbs. 1.354

24158 Wilen 20" 5 3.60 lbs. 1.354


24154 Wilen 14" 1 1.00 lbs. 0.115

23442 Wilen 17" 1 0.93 lbs. 0.145

23443 Wilen 19" 1 1.00 lbs. 0.178

23444 Wilen 20" 1 1.20 lbs. 0.178

DEEP SCRUB PAD

Use dry or wet on multiple floor surfaces to loosen deeply embedded soils. Use with machinesoperating at 175-350 R.P.M. Machine washable.

Microfiber

Microfiber

029_057 9/18/10 8:20 AM Page 55

496

496

106

Platform Trucks

Tilt Trucks

Tilt-N-Wheel™

Cube Truck

Utility Carts

Service / BussingCarts

106-108

106-107

107

107

108

108

Hand Trucks

Step Stools

Dunnage Racks

Shelves

109

109

109

110

M AT E R I A L H A N D L I N G

PLATFORM TRUCKS

Structural plastic construction and rounded corners protect against accidental wall and doordamage. No bumpers required. Plastic construction will not rust, dent, crack, chip, peel orsplinter unlike conventional metal or wood. All platform trucks come in charcoal grey and

feature a heavy-duty, reinforced steel handle.

Platform Trucks

Item Caster Deck Pack Case CaseBrand Number Item Capacity Size Size Case Weight CubeCMC 5860 Utility 700 lbs. 5" 24" x 48" 1 68.06 lbs. 6.420

CMC 5865 Standard 1,200 lbs. 6" 24" x 48" 1 75.50 lbs. 7.170

CMC 5870 Heavy-Duty 2,200 lbs. 8" 24" x 48" 1 78.88 lbs. 8.500

CMC 5875 Utility 700 lbs. 5" 30" x 60" 1 72.56 lbs. 10.030

CMC 5880 Standard 1,200 lbs. 6" 30" x 60" 1 80.00 lbs. 11.200

CMC 5885 Heavy-Duty 2,200 lbs. 8" 30" x 60" 1 83.38 lbs. 13.280

5/8 CUBIC YARD TILT TRUCKS

All models feature one-piece extra strong seamless industrial plastic construction. Inset wheelplacement prevents wall/door damage and allows for nesting in shipment and in storage. Fitsthrough standard office doorways. Optional domed, center-hinged lid helps to contain odors

and keep pests out. Stainless steel piano hinge will not rust.

TILT TRUCK COVER

Tilt Trucks

Item Pack Case CaseBrand Number Item Capacity Color Case Weight CubeCMC 5839BK Utility 300 lbs. Black 1 59.00 lbs. 43.110

CMC 5840BK Standard 750 lbs. Black 1 79.00 lbs. 43.110

CMC 5845BK Heavy-Duty 1,200 lbs. Black 1 81.00 lbs. 43.110

CMC 5843BK Fits all 5/8 cu. yd. tilt trucks Black 1 22.52 lbs. 8.640

PhoenixRecycles

Available in a Recycle model,see page 105 for details.

5840 Shown w/ 5843 Lid

106_110 9/18/10 8:39 AM Page 108

497

497

107

1.1 CUBIC YARD TILT TRUCKS

All models are equipped with deluxe roller bearing wheels and heavy-duty casters. Wheels areinset to fit standard office doorways and to reduce wall and door damage. This Tilt Truck iseasily handled by one person and can be easily cleaned with steam or high pressure hot water.Optional domed, center-hinged lid helps to contain odors and keep pests out. Stainless steelpiano hinge will not rust.

TILT TRUCK COVER

Item Pack Case CaseBrand Number Item Capacity Color Case Weight CubeCMC 5833BK Standard 800 lbs. Black 1 98.00 lbs. 55.280


CMC 5837BK Fits all 1.1 cu. yd. tilt trucks Black 1 22.52 lbs. 8.640

1.5 CUBIC YARD TILT TRUCKS

All models are equipped with deluxe roller bearing wheels and heavy-duty casters. This Tilttruck is easily handled by one person and is ideal for industrial/commercial applications.Optional domed, center-hinged lid helps to contain odors and keep pests out. Stainless steelpiano hinge will not rust.

TILT-N-WHEEL™

These 50 gallon containers have a hinged, double walled lid with standard 8" non-markingwheels.

TILT TRUCK COVER

Item Pack Case CaseBrand Number Item Capacity Color Case Weight CubeCMC 5849BK Standard 1,200 lbs. Black 1 202.00 lbs. 102.380


CMC 5853BK Fits all 1.5 cu. yd. tilt trucks Black 1 32.00 lbs. 18.300



Tilt-N-Wheel™

PhoenixRecycles


Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC 5850BK 50 gal. Black 2 56.00 lbs. 18.540

CMC 5850YW 50 gal. Yellow 2 56.00 lbs. 18.540

CUBE TRUCK

This 16 cubic foot Cube Truck features 3" casters placed in a diamond configuration. Twostationary and two fixed casters allow this unit to be turned on its own axis for greater mobility.Ideal for bulk linen collection and general material handling.

Cube Truck

PhoenixRecycles


Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC 5916BK 16 Cu. Ft. Black 1 79.00 lbs. 43.110

106_110 9/18/10 8:39 AM Page 109

498

498

108

UTILITY CART

The 5800 and 5805 two shelf Utility Carts feature 5" heavy-duty, non-marking grey castersfor industrial use. Supports 200 lbs. per shelf, 400 lbs. maximum capacity.

Optional center shelf available.

SERVICE / BUSSING CARTS

Three shelf cart features 4" heavy-duty, non-marking grey casters. Applications range fromindustrial use to food service and bussing. Supports 200 lbs. per shelf, 400 lbs. maximum

capacity. Accepts, without tools, the 5811 and 5812 silverware and refuse bins(see page 124 for details).

5805 shown w/ 5806,Optional Center Shelf.

Service / Bussing Carts

CMC 5801BE Fits all #5800 Carts Beige 1 10.40 lbs. 1.470CMC 5801GY Fits all #5800 Carts Grey 1 10.40 lbs. 1.470CMC 5806BE Fits all #5805 Carts Beige 1 16.50 lbs. 2.590CMC 5806GY Fits all #5805 Carts Grey 1 16.50 lbs. 2.590

Item Pack Case CaseBrand Number Size Color Case Weight CubeCMC 5800BE 343/8" x 171/2" x 33" Beige 1 32.90 lbs. 3.440

CMC 5800GY 343/8" x 171/2" x 33" Grey 1 32.90 lbs. 3.440

CMC 5805BE 403/8" x 251/2" x 33" Beige 1 42.60 lbs. 5.860

CMC 5805GY 403/8" x 251/2" x 33" Grey 1 42.60 lbs. 5.860

Item Pack Case CaseBrand Number Size Color Case Weight CubeCMC 5810BE 311/4" x 161/4" x 36 3/8" Beige 1 24.33 lbs. 4.340

CMC 5810BK 311/4" x 161/4" x 36 3/8" Black 1 24.33 lbs. 4.340

OPTIONAL CENTER SHELF

PNEUMATIC UTILITY CART

The heavy-duty plastic construction is lightweight and durable, and is designed to handle appli-cations from health care to industrial. The 8" fully pneumatic casters and all plastic design pro-

vide a cushioned, quiet ride that is ideal for transporting fragile items over rough surfaces.Derma-Tek® smooth skin, non-porous finish is easy to clean and provides a professional

appearance that will not peel, chip, crack or fade like conventional metal units. Supports 200lbs. per shelf, 400 lbs. maximum capacity. Compatible with 5806 Optional Center Shelf.

Utility Carts

Item Pack Case CaseBrand Number Size Color Case Weight CubeCMC 5805BE-PN 403/8" x 251/2" x 37" Beige 1 72.15 lbs. 5.860

CMC 5805GY-PN 403/8" x 251/2" x 37" Grey 1 72.15 lbs. 5.860

106_110 9/18/10 8:40 AM Page 110

499

499


109

DELUXE STEEL HAND TRUCK

Handles cartons or drums up to 55 gallons. Blue enamel finish is rust and corrosion resistant.Large, 10" x 23⁄ 4", solid wheels for durability.

Hand Trucks

Item Pack Case CaseBrand Number Color Case Weight CubeCMC 43 Blue Enamel Finish 1 36.13 lbs. 7.370

PLASTIC STEP STOOL

This structural plastic step stool is rugged enough to hold up to 350 lbs. The molded-in no-slipsurface prevents falls. Four retractable, non-marking casters and an anti-skid bottom makes iteasy to maneuver and hold it in place during use.

Step Stool

Item Pack Case CaseBrand Number Color Case Weight CubeCMC 523BK Black 1 8.30 lbs. 1.310

CMC 523TN Tan 1 8.30 lbs. 1.310

DUNNAGE RACK

These racks are the best solution for your storage needs. Made of durable polyethyleneconstruction, these units won’t rust, dent, chip or corrode like metal units. The light texturedsurface is easy to wipe-off or steam clean. The Dunnage-Key connector storage slot allows forstorage when not in use and is sloped to allow for drainage when cleaning. Ventilation slotsallow air to circulate under stored goods, promoting longer shelf life. Racks can be joinedtogether in end-to-end, back-to-back or in a L or U shape, to accommodate all storage needs.12" height meets NSF®, FDA and USDA requirements and meets food codes and H.A.C.C.P.’sfood storage requirements. Two keys are furnished with each rack. Additional keys available.

Dunnage Racks

Item Load Pack Case CaseBrand Number Size Capacity Color Case Weight CubeCMC 5930 30" x 22" x 12" 1,500 lbs. Grey 1 16.00 lbs. 4.950

CMC 5936 36" x 22" x 12" 1,500 lbs. Grey 1 19.50 lbs. 5.920



CMC 5906 N/A N/A Yellow 6 0.28 lbs. 0.010

DUNNAGE RACK KEY

NSF

NSF®�

106_110 9/18/10 8:40 AM Page 111

500

500


110

STRUCTO TUFF™ SHELVES

Structo Tuff™ Shelves are ideal for commercial use with chemical dispensing jugs, officesupplies and other items in warehouses, offices and janitor closets. Fast, easy assembly without

tools. Holds up to 250 lbs. per shelf.

Shelves

Item Pack Case CaseBrand Number Size Color Case Weight CubeCMC 4418-5GY 40" x 18" x 72" Charcoal Grey 1 71.00 lbs. 7.580

VENTILATED STORAGE SHELF

Ventilated Storage Shelf design allows for a moisture and dust free storage environment for allyour supplies. “Quick Assembly” socket and column system - no tools needed. Holds up to

150 lbs. per shelf.

Item Pack Case CaseBrand Number Size Color Case Weight CubeCMC 6484OY 361/4" x 181/8" x 541/4" Oyster 1 24.66 lbs. 4.220

NSF® VENTILATED STORAGE SHELF

Ventilated Storage Shelf design allows for a moisture and dust free storage environment forall your supplies with base leveling feet. NSF® listed. Holds up to 150 lbs. per shelf. Includes

practical 6" leveling feet for cleaning and stability.

Item Pack Case CaseBrand Number Size Color Case Weight CubeCMC 6485OY 361/4" x 181/8" x 601/4" Oyster 1 27.06 lbs. 4.220

NSF

NSF®�

106_110 9/18/10 8:40 AM Page 112

501

501

3

SPLASH GUARD™ SIDE-PRESS WRINGER

Accommodates 12 to 32 ounce mops. Mop handle holder is molded into wringer front.Ergonomic handle design for leverage and comfort. Wringer nests in bucket for economicstorage and shipment. Fits Continental® 26, 35 and 44 quart mop buckets.

DOWN-PRESS WRINGER

Accommodates a variety of mops. Extended handle design for leverage and comfort. Utilizesgears to increase leverage and reduce user fatigue. Wringer nests in bucket for economicstorage and shipment. SW2 fits Continental® 26 quart mop buckets. SW7 fits 26, 35 and44 quart mop buckets.

INSTITUTIONAL WRINGER

Accommodates 12 to 32 ounce mops. Funnel-type wringer design uses no moving parts and is completely metal-free for improved safety. Fits Continental® 35 quart bucket.

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC SW12YW 12 - 32 oz. mops Yellow 1 8.52 lbs. 1.440

CMC SW12BZ 12 - 32 oz. mops Bronze 1 8.52 lbs. 1.440

CMC SW12BL 12 - 32 oz. mops Blue 1 8.52 lbs. 1.440

CMC SW12GN 12 - 32 oz. mops Green 1 8.52 lbs. 1.440

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC SW2YW 8 -16 oz. mops Yellow 1 8.26 lbs. 1.450

CMC SW7YW 16 - 32 oz. mops Yellow 1 10.58 lbs. 2.370

CMC SW7BZ 16 - 32 oz. mops Bronze 1 10.58 lbs. 2.370

CMC SW7BL 16 - 32 oz. mops Blue 1 10.58 lbs. 2.370

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC SW9YW 12 - 32 oz. mops Yellow 1 4.00 lbs. 1.250

Wringers

SW7 shown

Wringers

Mop Buckets

Combo Packs

ErgoWorx®

Floor Signs & Cones

Microfiber

3

4

4-6

6

6-8

8-14

Sponge Mops

Wet Mops

Wet Mop Handles

Floor Finish Tools

Janitorial Carts

14

15-23

23-26

26-27

27-28

M O P P I N G EQ U I P M E N T

All Wilen® products are now shipping out of our Bridgeton, MO facility.Select Wilen® products are also shipping out of our Chino, CA facility.

001_028 9/18/10 10:11 AM Page 3

502

502

4

26 QT. SPLASH GUARD™ MOP BUCKET

Includes plated steel bail, 3" non-marking grey casters, embossed graduations and universal“caution” logo. Fits Continental® SW2, SW7 and SW12 wringers.

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC 226-3YW 26 qt. Yellow 1 13.00 lbs. 2.710

CMC 226-3BZ 26 qt. Bronze 1 13.00 lbs. 2.710

CMC 226-3BL 26 qt. Blue 1 13.00 lbs. 2.710

CMC 226-3GN 26 qt. Green 1 13.00 lbs. 2.710

44 QT. STRUCTOLENE® MOP BUCKET

Super durable Structolene® mop bucket with plated steel bail, 3" non-marking grey casters,embossed graduations and universal “caution” logo. Fits Continental® SW7 and SW12 wringers.


INSTITUTIONAL WRINGER COMBO

The 35 quart Institutional Wringer Combo is available with 3" non-marking casters for improvedmaneuverability (335-39) or without casters (335-9) for areas where safety is a concern.

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC *335-9YW 35 qt. Yellow 1 14.00 lbs. 3.950

CMC 335-39YW 35 qt. Yellow 1 16.00 lbs. 4.630

*Non-Stock Item

35 QT. SPLASH GUARD™ MOP BUCKET

Includes plated steel bail, 3" non-marking grey casters, embossed graduations anduniversal “caution” logo. Fits Continental® SW7, SW9 and SW12 wringers.



CMC 335-3BL 35 qt. Blue 1 16.00 lbs. 3.840

Mop Buckets

Combo Packs

UNIBODY® MOPPING SYSTEM

The 35 quart Unibody® is the most efficient side-press wringing system available. The one-piece design results in a positive transfer of force, removing more water per stroke. Includes

self-draining spigot and sediment screen drain grate.

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC 351YW 35 qt. Yellow 1 22.68 lbs. 7.200

CMC 351BZ 35 qt. Bronze 1 22.68 lbs. 7.200

CMC 351BL 35 qt. Blue 1 22.68 lbs. 7.200

CMC 351GN 35 qt. Green 1 22.68 lbs. 7.200

CMC 351RD 35 qt. Red 1 22.68 lbs. 7.200

Refers to 335-9YW

Spigot

001_028 9/18/10 10:11 AM Page 4

503

503


5

26 QT. SPLASH GUARD™ COMBO PACK

26 quart bucket with 3" non-marking grey casters and SW12 side-press wringer.



CMC 226-312BL 26 qt. Blue 1 17.46 lbs. 2.780

CMC 226-312GN 26 qt. Green 1 17.46 lbs. 2.780


35 quart bucket with 3" non-marking grey casters and SW12 side-press wringer.



CMC 335-312BL 35 qt. Blue 1 20.48 lbs. 4.410


35 quart bucket with 3" non-marking grey casters and SW7 down-press wringer.



CMC 335-37BL 35 qt. Blue 1 28.00 lbs. 4.410

35 QT. SPLASH GUARD™ BACKSAVER COMBO PACK

35 quart self-draining bucket with 3" non-marking grey casters and SW12 side-press wringer.Includes self-draining spigot and sediment screen drain grate.


35 QT. SPLASH GUARD™ BACKSAVER COMBO PACK

35 quart self-draining bucket with 3" non-marking grey casters and SW7 down-press wringer.Includes self-draining spigot and sediment screen drain grate.


SMOOTHLINE COMBO PACK

26 quart bucket with 3" non-marking grey casters. Choose between a SW2 down-presswringer or a SW6 side-press wringer for medium size mops.


CMC 266-36YW 26 qt. Yellow 1 10.50 lbs. 3.070

266-36 shown

001_028 9/18/10 10:11 AM Page 5

504

504

6

ErgoWorx®

Floor Signs and Cones

44 QT. STRUCTOLENE® COMBO PACK

44 quart bucket with 3" non-marking grey casters, embossed graduations, universal “caution”logo and a SW7 down-press wringer.


ERGOWORX® TOUCHLESS MICROTEK CLEANING SYSTEMContinental Commercial Products® introduces the first truly Touchless Microfiber Cleaning

System. Continental Commercial Products® has always been focused on developing more effectiveways to clean. We’ve taken the advanced science of Microfiber and created a complete

“SYSTEM” which will significantly reduce the risk of cross-contamination when cleaning anddisinfecting rooms.

Microfiber cleaning truly offers many health and safety benefits along with tangible cost benefits.This makes the Ergoworx® Touchless Microtek Cleaning System from Continental Commercial

Products® the clear choice for your Microfiber cleaning needs.

ERGOWORX® TROLLEYThe newest addition to the ErgoWorx® system, the Microfiber Trolley. This trolley can be added

to the SYS-5 to create a mobile cleaning system that is both compact and efficient. The 3" non-marking, all swivel casters provide finger touch mobility, ideal for tight hallways and small rooms.

The MFT-5 is designed to accommodate common cleaning tools including a wet floor sign,microflex duster, wipes and RTU trigger sprayer bottles.

ERGOWORX® LAUNDRY NET BAGMade of 100% polyester net with drawstring lock closure. This bag is perfect for discarding intoand transporting dirty Microfiber refills to the laundry. Designed to fit perfectly in the Ergoworx®

Microfiber Discharge Bucket. Available in white.

ERGOWORX® STARTER KITSWe offer two Starter Kits. SYSK-1 includes the following:

(1 ea) SYS-5, MFT-5BK, C714000, (2) A80805, (10) C103020, (12) E810016). SYSK-2 includes the following: (1 ea) SYS-5, C714000, (2) A80805, (10) C103020, (12) E810016).

ERGOWORX® ACCESSORIESA full line of products to use in conjunction with the ErgoWorx® System is shown on pages 8-14.

QUAD-CONE

Available in 26" or 35" high with universal caution symbol on all four sides. Accommodateslock-on warning signs (S222-1RD), a ring weight (W222BK fits 222YW only), barrier chain

(C123-2YW) and common barrier tape for cordoning off an area.

Item Pack Case CaseBrand Number Height Color Case Weight CubeCMC 221YW 26" Yellow 3 9.25 lbs. 2.491

CMC 222YW 35" Yellow 3 14.53 lbs. 4.430

Universal swivel joint has cross-pin

and ferrule nutconnector fora secure and

positive lock.

Ultrasonicallywelded Velcro® strips providea sure grip forthe Microfiber

\ flat mops.

Item Pack Case CaseBrand Number Item Size Color Case Weight CubeCMC SYS-5 Complete ErgoWorx® System 22" x 197/8" x 115/8" Yellow/Black 1 10.24 lbs. 2.640

CMC MFT-5BK ErgoWorx® Trolley for SYS-5 313/4" x 23" x 381/2" Black 1 13.80 lbs. 2.270

CMC CB-5YW Solution Bucket w/ Perf. Screen 22" x 123/8" x 115/8" Yellow/Black 1 5.72 lbs. 1.910

CMC SB-5YW Discharge Bucket w/ Alum. Rod 22" x 8" x 111/8" Yellow 1 3.54 lbs. 1.280

CMC MF-5BK Auto Discharge Mop Frame 18" x 55/8" x 13/4" Black 1 1.62 lbs. 0.160

CMC SYSK1 Starter Kit w/ Trolley Multiple Items - - - 1 29.14 lbs. 5.670

CMC SYSK2 Starter Kit w/out Trolley Multiple Items - - - 1 15.34 lbs. 3.480

Wilen A80805 Laundry Net Bag 21" x 63/4" x 91/2" White 5 2.40 lbs. 0.626

PATENTED

A80805 Laundry Net Bag

LAUNDRY NET BAG

SYS-5 shown w/MFT-5BK &C714000 Handle

001_028 9/18/10 10:11 AM Page 6

505

505


7

QUAD-CONE SYSTEM

This all-inclusive system contains three 35" yellow Quad-Cones, one 2" x 20' yellow BarrierChain and two red Lock-On Warning Signs, to create an entire floor safety system.

Item Pack Case CaseBrand Number Height Color Case Weight CubeCMC 222-3YW 35" Yellow 1 20.19 lbs. 4.430

COLLAPSIBLE TRI-CONE

These cones provide the most protection with the greatest flexibility. The three-sided designprovides 360° of visibility for increased protection. Both sizes come with a plastic storage tubefor mounting on a wall, column, gondola or a Janitor’s Cart.

Item Pack Case CaseBrand Number Height Color Case Weight CubeCMC 220 20" Yellow 12 11.46 lbs. 1.230

CMC 230 30" Yellow 12 15.48 lbs. 1.890

LOCK-ON WARNING SIGN

Large square sign with imprint. Twist-locks onto 221YW or 222YW Tri-Cones. Case includesone each of both signs.

Item Pack Case CaseBrand Number Height Color Case Weight CubeCMC S222-1RD Adds 103/8" Red 2 2.42 lbs. 0.254

BARRIER CHAIN

Plastic Barrier Chain easily locks into the Quad-Cone’s exclusive keyhole design accessoryport. Also fits 114, 119, and 120 easel-type floor signs.

Item Pack Case CaseBrand Number Size Color Case Weight CubeCMC C123-2YW 2" x 20' Yellow 3 3.24 lbs. 0.410

RING WEIGHT

This 9 lb. black painted steel ring fits the 222YW Quad-Cone to prevent tipping in heavy winds.

Item Pack Case CaseBrand Number Color Case Weight CubeCMC W222-2BK Black 1 21.00 lbs. 0.271

MULTI-USE FLOOR SIGN

This unique and patented design utilizes four separate multilingual message centers built into asingle sign - simply flip to the appropriate message center. Messages are imprinted in red andblack for increased visibility and are in English, Spanish and French. Accepts Barrier Chain andcommon barrier tape for connecting multiple signs and cordoning off an area.

Item Pack Case CaseBrand Number Height Color Case Weight CubeCMC 114 26" Yellow 2 11.50 lbs. 1.120

001_028 9/18/10 10:12 AM Page 7

506

506

8

“WET FLOOR” CAUTION CONES

These orange, 18" high bilingual English/Spanish cones are made of vinyl plastic with aweighted tip-proof base.

Item Pack Case CaseBrand Number Item Color Case Weight CubeCMC 125ENG English only Orange 6 23.25 lbs. 1.930

CMC 125SP English & Spanish Orange 6 23.25 lbs. 1.930

MAXI-WARN™ WET FLOOR SIGNS

The new 37" high, easel-type floor sign with two-sided, trilingual (Eng/Sp/Fr) message. AcceptsBarrier Chain and common barrier tape for connecting multiple signs and cordoning off an area.

Item Pack Case CaseBrand Number Item Color Case Weight CubeCMC 120 “Caution” Sign Yellow 6 20.88 lbs. 2.840

CMC 120C “Closed” Sign Yellow 6 20.88 lbs. 2.840

Item Pack Case CaseBrand Number Item Color Case Weight CubeCMC 119 “Caution” Sign Yellow 6 16.95 lbs. 1.120

CMC 119C “Closed” Sign Yellow 6 16.95 lbs. 1.120

WET FLOOR SIGNS

26" high, easel-type signs with a two-sided trilingual (Eng/Sp/Fr) imprint message. AcceptsBarrier Chain and common barrier tape for connecting multiple signs and cordoning off an

area.

MicrofiberWHAT IS MICROFIBER?

Microfiber is an ultrafine synthetic fiber that is very durable and lint free. Each fiber is split during the manufacturingprocess which creates unique shapes for effective mopping. Unlike conventional mop yarns, each strand of Microfiber is

wedge-shaped with sharp edges which makes it very effective for removing, absorbing and accumulating virtually any type of dirt, dust, grease or contaminant. Our Microfiber refills are made to the specifications of three microns where

most bacteria and dirt are between four and nine microns.

Microfiber cleaning truly offers many health and safety benefits along with tangible cost benefits, which makes ContinentalCommercial Products® ErgoWorx® Touchless Microtek Cleaning System the clear choice for your Microfiber cleaning needs.

See page 6 for the new ErgoWorx® System, Trolley and accessories.

Bacteria, Dust, Dirt,

Debris, etc.

Disposable Refills

CHARGER™ DISPOSABLE DUST MOP

The Charger™ Disposable Dust Mop picks up dust, dirt and hair by creating a static chargeand trapping the debris within the mops’ tiny fibers. Using this inexpensive, disposable dust

mop aids in cross-contamination prevention for health care environments. The Charger™ mopcomes conveniently packed in 200 pre-cut sheets per box, and attaches easily to the

SpringBack™ mop frame.

Item Pack Case CaseBrand Number Size Color Case Weight CubeWilen C429000 8" x 26" White 200 5.00 lbs. 1.523

Use with Springback™ mop frame.

001_028 9/18/10 10:12 AM Page 8

507

507


9

Launderable Refills

SUPER PRO II™

Looped-end construction and durable Microfiber provide long product life. Made of 100%Microfiber, it can be laundered 300 to 500 times, when cared for properly. Perma-Stitch sewnborder is extremely durable. Hook and loop attachment for easy installation and removal fromframe. Can be used for damp or dry mopping.


Wilen C103018 5" x 18" Blue 12 3.00 lbs. 0.247

Wilen C103020 5" x 20" Blue 10 2.30 lbs. 0.277

Wilen C103024 5" x 24" Blue 12 4.00 lbs. 0.328

Wilen C103036 5" x 36" Blue 12 6.00 lbs. 0.489

Wilen C104013 5" x 13" Red 12 2.00 lbs. 0.180

Wilen C104018 5" x 18" Red 12 3.00 lbs. 0.247

Wilen C104020 5" x 20" Red 10 2.30 lbs. 0.277

Wilen C104024 5" x 24" Red 12 4.00 lbs. 0.328

Wilen C104036 5" x 36" Red 12 6.00 lbs. 0.489

Wilen C107013 5" x 13" Yellow 12 2.00 lbs. 0.180










SUPER PRO II™ MICROFIBER w/SCRUB REFILLS

Cut-end construction designed to penetrate into cracks and crevices in the floor. Fibers allowmaximum scrubbing action to the floor’s surface. Scrubbing strips remove scuff marks.Microfiber yarn allows up to 500 washings. Hook and lop backing for easy attachment andremoval from Velcro® strip frame. Can be used damp or wet.


Wilen C123018 5" x 18" Blue 12 3.00 lbs. 0.247

Wilen C123024 5" x 24" Blue 12 4.00 lbs. 0.328

Wilen C123036 5" x 36" Blue 12 6.00 lbs. 0.489

Wilen C124013 5" x 13" Red 12 2.00 lbs. 0.180

Wilen C124018 5" x 18" Red 12 3.00 lbs. 0.247

Wilen C124024 5" x 24" Red 12 4.00 lbs. 0.328

Wilen C124036 5" x 36" Red 12 6.00 lbs. 0.489









001_028 9/18/10 10:12 AM Page 9

508

508

THE DUSTER™

Specially designed to attract dust, much like a cut-end dust mop, but has the strength anddurability of Microfiber. Use to pick up larger particles before damp mopping or disinfecting.

Can be laundered up to 150 times.

Dry Refills

Item Pack Case CaseBrand Number Size Color Case Weight CubeWilen C110020 5" x 20" White 10 2.30 lbs. 0.208

10

Specialty Refills

THE AGGRESSOR™

This innovative combination of Microfiber yarn and synthetic stiff brush fibers is designed toremove debris stuck to the floor that normal “yarn only” Microfiber flat mops cannot.

Item Pack Case CaseBrand Number Size Color Case Weight CubeWilen C109018 5" x 18" White/Green 12 3.50 lbs. 0.247

Wilen C109020 5" x 20" White/Blue 10 2.13 lbs. 0.404

SUPER PRO™ FINISH FLAT MOP

The Microfiber Finish Flat Mop is looped-end and constructed of high-wet modulus rayonblend yarn that provides quick, controlled liquid release. The Finish Flat Mop will cover a 20"

wide swath. Unlike conventional finish mops, 100% of the floor finish goes onto the floor alongwith full contact of the refill to the surface allowing better productivity and less chemical

wasted in the mop. Should be rinsed after every use.

Item Pack Case CaseBrand Number Size Color Case Weight CubeWilen C106020 5" x 20" Light Blue 6 1.40 lbs. 0.276

C109020

Microfiber Handles

MICROFIBER PRO™ FLAT MOP HANDLES

Pro handles are made of lightweight, long-lasting aluminum that will not rust or corrode. Twist-lock mechanism allows extendible handle to adjust from 33.5" to 60". Available in extendible

and 60" fixed sizes.

Item Pack Case CaseBrand Number Size Color Case Weight CubeWilen C714060 7/8" x 60" Fixed Blue/Silver 10 6.50 lbs. 0.631

Wilen C714000 7/8" x 331/2"-60" Blue/Silver 10 5.00 lbs. 0.439

001_028 9/18/10 10:12 AM Page 10

509

509


11

Microfiber Frames

PRO II™ FLAT MOP FRAME

Pro II™ Flat Mop Frame has a lightweight design that provides dramatic improvements in laborproductivity. The trapezoid head effectively cleans corners and edges. 360° swivel attachmentfor maneuvering in tight areas. Handle Locking Clip secures handle to frame connector.Designed to compliment our line of Microfiber refills.

Item Pack Case CaseBrand Number Size Color Case Weight CubeWilen C717011 3" x 11" Blue/Silver 10 4.00 lbs. 0.553

Wilen C717016 3" x 16" Blue/Silver 10 6.00 lbs. 0.796

Wilen C717018 43/4" x 18" Blue/Silver 10 7.00 lbs. 0.893



SPRINGBACK™ MOP FRAME

This heavy-duty aluminum frame, with its spring-loaded attachment, will hold up to threeCharger™ disposable sheets. Removable 1/4" thick foam pad allows easy maneuvering whiledry dust mopping. This frame can also be used with our 26" Microfiber refill pads. Frames canbe used with our current Pro™ flat mop handles.

Item Pack Case CaseBrand Number Size Color Case Weight CubeWilen C716024 31/2" x 24" Silver 10 13.00 lbs. 1.038

SUPER SORB TUBE MOP

This looped-end, wet mop is environmentally friendly because it requires less chemicals thancotton/blend yarn mops, Microfiber material offers excellent absorbency, as well as superiorscrubbing power. Mops can be laundered 400 times. Mop features a 5" wide headband to beused with jaw type handles.

Item Pack Case CaseBrand Number Size Color Case Weight CubeWilen A10001 11 oz. / Sm Blue 12 9.00 lbs. 0.984

Wilen A10002 14 oz. / Med Blue 12 11.50 lbs. 1.292

Wilen A10003 18 oz. / Lg Blue 12 14.50 lbs. 1.799

Wilen A10101 11 oz. / Sm Green 12 9.00 lbs. 0.984

Wilen A10102 14 oz. / Med Green 12 11.50 lbs. 1.292

Wilen A10103 18 oz. / Lg Green 12 14.50 lbs. 1.799

Velcro®

Velcro®

Use with Charger™ sheets

Removable foam

Microfiber Wet Mops

DURALOOP WET MOP

This mop will pick up twice as much liquid as a standard blended, looped-end mop. Can beused as a wax application mop. Use with Jaws type wet mop handles. Launder up to 150 times.

Item Pack Case CaseBrand Number Size Color Case Weight CubeWilen A09002 Medium Blue 12 11.00 lbs. 0.970

Wilen A09003 Large Blue 12 16.00 lbs. 1.260

001_028 9/18/10 10:12 AM Page 11

510

510

12

MICROLOOPED DUST MOP

This mop will pick up twice as much dirt as a 100% cotton cut-end dust mop. Can be usedas a wax application mop. Fits any standard dust mop frame. Launder up to 150 times.


Wilen C090024 24" x 5" Blue 12 6.00 lbs. 1.070

Wilen C090036 36" x 5" Blue 12 8.00 lbs. 1.600

Wilen C090048 48" x 5" Blue 6 5.50 lbs. 1.070

MICROLOOPED MICROFIBER VELCRO & CANVAS BACKED DUST MOPS

Microfiber dust mops pick up dirt and dust electrostatically. These mops are more efficient andlast longer than typical cotton/blended dust mops. Microfiber dust mops are available in both

conventional keyhole style backing that accepts industry standard dust mop frames, as well ashook and loop backing for velcro frames.

VELCRO BACKEDItem Pack Case Case




CANVAS BACKEDItem Pack Case Case






C091018

C092036

Microfiber Dust Mops

FRINGED MOP & FRINGED MOP w/SCRUB

Made of 100% Microfiber. Flat mops can be used in wet or dry applications. Looped-end edgestyles are available in cut-end center with scrubs for scuff marks and looped-end center for

scrubbing. Both flat mops accept Velcro® frames.

FRINGED MOP w/SCRUBItem Pack Case Case


Wilen C133024 5" x 24" Blue 12 6.00 lbs. 0.328



FRINGED MOPItem Pack Case Case


Wilen C143024 5" x 24" Blue 12 6.00 lbs. 0.328



C138024

C143018

001_028 9/18/10 10:12 AM Page 12

511

511


13

Cleaning Cloths

SUPREMO™ MICROFIBER CLOTH

All purpose cleaning cloth. Great for dusting and cleaning all types of surfaces.

Item Pack Case CaseBrand Number Size Color Case Weight CubeWilen E800016 16" x 16" Green 12 2.00 lbs. 0.296

Wilen E801016 16" x 16" Green 180 20.00 lbs. 2.400

Wilen E810016 16" x 16" Blue 12 2.00 lbs. 0.296

Wilen E811016 16" x 16" Blue 180 20.00 lbs. 2.400

Wilen E820016 16" x 16" Red 12 2.00 lbs. 0.296

Wilen E821016 16" x 16" Red 180 20.00 lbs. 2.400

Wilen E830016 16" x 16" Yellow 12 2.00 lbs. 0.296

Wilen E831016 16" x 16" Yellow 180 20.00 lbs. 2.400

Wilen E840016 16" x 16" Pink 12 2.00 lbs. 0.296

Wilen E841016 16" x 16" Pink 180 20.00 lbs. 2.400

Cleaning Mitts

GLASSIC™ MICROFIBER CLOTH

Ideal for cleaning soap, grease or finger prints from windows, mirrors and metal surfaces.Leaves a streak-free finish.

Item Pack Case CaseBrand Number Size Color Case Weight CubeWilen E850016 16" x 16" Light Blue 12 2.00 lbs. 0.296

Wilen E851016 16" x 16" Light Blue 216 20.00 lbs. 2.400

SUPREMO™ MICROFIBER MITT

Ideal for general purpose cleaning, needing very little chemical to clean. Great for getting intohard-to-clean places. Can be laundered five times more than 100% cotton towels.

Item Pack Case CaseBrand Number Size Color Case Weight CubeWilen E220022 95/8" x 7" Light Green 12 1.00 lbs. 0.300

Wilen E221022 95/8" x 7" Light Blue 12 1.00 lbs. 0.300

GLASSIC™ MICROFIBER MITT

Ideal for cleaning smooth metal and glass, needing very little chemical to clean. Great forgetting into hard-to-clean places. Can be laundered five times more than 100% cotton towels.

Item Pack Case CaseBrand Number Size Color Case Weight CubeWilen E222022 91/2" x 7" Light Green 12 1.60 lbs. 0.500

Wilen E223022 91/2" x 7" Light Blue 12 1.60 lbs. 0.500

001_028 9/18/10 10:12 AM Page 13

512

512

14

Sponge Mops

COMBO SPONGE MOP

This highly absorbent sponge is excellent for maintenance and sanitizer applications.Steel painted handle with hanger handle grip. 12" wide.

Item Pack Case CaseBrand Number Item Length Case Weight CubeCMC 6012 Complete 5513/16" 12 38.88 lbs. 3.600

CMC 6112 Refill 12" 12 8.16 lbs. 1.440

ROLLER CELLULOSE SPONGE

This durable sponge mop features an extra wide cellulose sponge for maximum absorption anda convenient handle mounted lever for efficient roller wringing. Wringing is easy without having

to bend over. Plated metal construction and plastic rollers assure long service. Cellulosesponge refills are also available. Sponge measures 12" wide.

Item Pack Case CaseBrand Number Item Length Case Weight CubeWilen B805000 Complete 55" 6 14 lbs. 2.734

Wilen B806000 Refill 12" 6 6 lbs. 2.482

15/16" Dia.

15/16" Dia.

Item Pack Case CaseBrand Number Item Length Case Weight CubeWilen B809000 Complete 36" - 53" 6 14 lbs. 1.995

Wilen B809500 Refill 10" 12 6 lbs. 0.600

PVA SPONGE MOP

Polyvinyl Alcohol is incredibly absorbent and durable. Rippled sponge provides excellentscrubbing action for cleaning debris. Hand operated wring lever. Durable, long-lasting plastic

housing with smooth, effortless wringing operation. Sponge is blue.

15/16" Dia.

Flexible Duster

MICROFLEX™ DUSTER

The latest in Microfiber technology. Flexible thin foam frame allows effective cleaning in tight,hard–to-reach areas. Frame accepts a hand held handle or either one of our Pro Flat mop

handles for high area cleaning. Microfiber refills provide durability and long product life. Simplyrinse away dirt with water after every use. Duster refill available separately.

Item Pack Case CaseBrand Number Item Size Color Case Weight CubeWilen E224000 Complete 2" x 27" Blue/Light Blue 1 0.16 lbs. 0.170

Wilen E224100 Refill 2" x 22" Light Blue 3 0.06 lbs. 0.060

001_028 9/18/10 10:12 AM Page 14

513

513


15

Choosing the Best Value in Wet Mops

To accommodate yourspecific cleaning needs,we offer a wide variety ofyarns as well as newproducts to help users do their job more efficiently.Let the following infor-mation assist you inchoosing which mopsare right for your needs.

Cotton Good absorption & retention. Requires break-in. Lints and dries General use. Picking up liquids Low initial cost. slow, promotes mildew and Scrubbing.

deterioration.

Rayon Quick absorption & release. Dries Shrinks when laundered. Applying liquidsfast, mildew resistant. Cleaner yarn, Less liquid retention. (finishes, disinfectants).lints less.

Synthetic Long staple fiber for superior Higher cost. Cleanrooms.tensile strength, no lint. Poor absorption. Rough surfaces.

Blends Ideal balance for price, performance May shrink (unless pre-shrunk). Professionals who require betterand durability. Synthetic fibers add and longer lasting mops.durability & color

YARN ADVANTAGES DISADVANTAGES USES

YarnCertain yarns do a specific task better than other yarns. That’s why there is such a variety of mops. To get maximum efficiency andvalue from a wet mop, it is important to select the right yarn for the job.

Yarn PlyYarn ply indicates the number of strands twisted together to make a single yarn strand. More plies give added strength, though higher ply numbers do not necessarily mean higher quality yarn. More strands may add durability but they also decrease absorbency. It’s much better and more cost effective to choose a higher quality yarn than a high ply, low quality yarn.

TwistA yarn’s “twist” is a result of how tightly the fiber strands are wound together. While a tightlytwisted yarn might be stronger and last longer, its absorbency may be decreased. Like yarn ply,the best value isn't determined by the yarn’s twist, but by the type and quality of the yarn andthe mop’s construction. A mop with looped-end construction enables the yarn to have a loose twist while eliminating fraying.

SizesA mop’s size should be in relation to the job to be performed, the mop wringer being used and the user’s size. Cut-end mops are sized by their approximate weight in ounces. Looped-end mops are sized by industry standards since they absorb and retain much more while also covering a greater surface area than a cut-end mop of comparable weight.

Cut-EndThe cut-end is the standard, most popular and economical (initially) mop style. Cut-end mops fray and unravel, increasing the lint factor and leaving loose strands behind. In addition, without tailbands, cut-end mops cover less area per pass. Since cut-end mops cannot be laundered, they are often considered “disposable” and thrown awaybefore their useful life is over.

Looped-EndThe looped-end mop is designed for superior performance and extended life. There are no ends to fray or unravel as the mop sweeps over the floor surface in a wide, even path. Looped-end mops can be laundered for longer life and cleaner appearance. The initial investment is soon compensated with lower replacement, reduced labor cost and increased performance.

001_028 9/18/10 10:12 AM Page 15

514

514

16

Headbands11⁄4" headbands are available for stirrup-type handles and are useful on finishing-type mops such as our FastTrack™ looped-end mop. The 5" width headbands are compatible with clamp and jaw-type handles. The synthetic mesh material provides non-abrasive scrubbing to help dislodge dirt and to allow quick drying of yarns. Abrasive scrubbing pads can also be included.

MicroBlocker™Locked into the yarn are fibers containing a registered antimicrobial additive. The additive protects themop head from deterioration by inhibiting the growth of stain and odor causing bacteria, mold, mildew, and yeast in and on the mop head.

Looped-End MopsLAUNDERABLE, PRE-SHRUNK MOPSOur line of pre-shrunk, looped-end mops is designed to meet the needs of the health care industry and other users who launder mops. These mops may be laundered repeatedly while maintaining their clean appearance, low lint factor, absorbency and strength without shrinking. They also save money by outlasting cut-end mops up to eight times and reducing labor costs by up to one half!

6.25"

5"

Wide Headband

6.25"

1.25"

Narrow Headband

Aggressor™ vinyl coveredmesh headband is more durable

Two types of top quality,pre-shrunk yarn withstandheavy use and laundering

Tailband provideswide surface cover-age and preventstangles

Looped-end yarn keeps yarnends from fraying and linting

Looped-End Wet Mops

HOSPITAL PRO M™ - ANTIMICROBIAL

Designed for the demanding needs of the health care industry, the Hospital Pro M™ stands up to toughuse and heavy washing. Its high-quality, integrated blend of cotton/rayon/synthetic fibers ensures

durability and absorbency. Also ideal for all-purpose cleaning.

5" Mesh Band 1.25" Tape Band Yarn Pack Case CaseBrand Item Number Item Number Size Color Case Weight CubeWilen A01101 A01111 Small White 12 10.00 lbs. 1.290

Wilen A01102 A01112 Medium White 12 15.00 lbs. 1.813

Wilen A01103 A01113 Large White 12 18.00 lbs. 1.813

Wilen A01201 A01211 Small Blue 12 10.00 lbs. 1.290

Wilen A01202 A01212 Medium Blue 12 15.00 lbs. 1.813

Wilen A01203 A01213 Large Blue 12 18.00 lbs. 1.813

Wilen A01301 A01311 Small Orange 12 10.00 lbs. 1.290

Wilen A01302 A01312 Medium Orange 12 15.00 lbs. 1.813

Wilen A01303 A01313 Large Orange 12 18.00 lbs. 1.813

Wilen A01501 A01511 Small Green 12 10.00 lbs. 1.290

Wilen A01502 A01512 Medium Green 12 15.00 lbs. 1.813

Wilen A01503 A01513 Large Green 12 18.00 lbs. 1.813

6.25"

5"

4-ply

Pre-shrunkPolyester

Equivalent ApproximateSize Ounces Band Color Lbs. / Dz.Small 8-10 Red 10

Medium 16-20 Green 15Large 24-32 Blue 18

X-Large 32-40 Yellow 23

001_028 9/18/10 10:12 AM Page 16

515

515


17

5" Mesh Band 1.25" Tape Band Yarn Pack Case CaseBrand Item Number Item Number Size Color Case Weight CubeWilen A00601 A00611 Small Blue 12 10.00 lbs. 1.290









FANTASTIC™

The Fantastic™ is constructed of a super absorbent, 4-ply conditioned rayon/synthetic yarn. Uniform twistand high-quality construction make it ideal for disinfecting and all purpose cleaning. Quick drying yarnresists the growth of mildew and bacteria.

6.25"

5"

4-ply

Pre-shrunkPolyester

SUPER CROWN™ - ANTIMICROBIAL

High-grade, multi-layered, blended cotton/rayon/synthetic yarn provides good absorption and durability forthis top of the line general maintenance mop. Excellent for general cleaning.

This mop is not pre-shrunk. Launder with care.




Wilen A02004 A02014 X-Large White 12 23.00 lbs. 2.828




Wilen A02104 A02114 X-Large Blue 12 23.00 lbs. 2.828




Wilen A02204 A02214 X-Large Orange 12 23.00 lbs. 2.828




Wilen A02404 A02414 X-Large Green 12 23.00 lbs. 2.828

6.25"

5"

4-ply

Polyester

J.W. ATOMIC LOOP™

This economical cotton/rayon/synthetic blend mop cleans two to three times the area with up to six times thelife of a conventional cut-end mop.

5" Mesh Band 1.25" Tape Band Yarn Pack Case CaseBrand Item Number Item Number Size Color Case Weight CubeWilen A02501 A02511 Small Natural 12 10.00 lbs. 1.290

Wilen A02502 A02512 Medium Natural 12 15.00 lbs. 1.813

Wilen A02503 A02513 Large Natural 12 18.00 lbs. 1.813

Wilen A02504 A02514 X-Large Natural 12 23.00 lbs. 2.828














6.25"

5"

4-ply

Polyester

001_028 9/18/10 10:12 AM Page 17

516

516

18

Economy Line Wet Mops

GENERAL PURPOSE LOOPED-END

This commercial cotton mop is perfect for general purpose cleaning. Sewn English/Spanish tailband.

5" Mesh Band 1.25" Tape Band Yarn Pack Case CaseBrand Item Number Item Number Size Color Case Weight CubeWilen A11101 A11111 Small Natural 12 10.00 lbs. 1.290



Wilen A11104 A11114 X-Large Natural 12 23.00 lbs. 2.828













Laundering not recommended.

J.W. ATOMIC RAYON LOOP™

This economical rayon/synthetic is for the application of chemicals and is perfect for floor finishing.




Wilen A02904 A02914 X-Large White 12 23.00 lbs. 2.828

JEAN CLEAN™

Constructed of reconditioned denim and other textile materials, Jean Clean™ is more durable andabsorbent than cotton blended yarn with no break-in period required. Looped-end cotton/polyester yarn

prevents fraying and linting.

5" Mesh Band 1.25" Tape Band Yarn Pack Case CaseBrand Item Number Item Number Size Color Case Weight CubeWilen A03001 A03011 Small Blue 12 10.00 lbs. 1.290



5" Mesh 1.25" TapeBlend Band Blend Band Yarn Pack Case Case

Brand Item Number Item Number Size Color Case Weight CubeWilen A05001 A05011 Small Natural 12 10.00 lbs. 1.290






BULLDOG MOP™

In looped-end mops, the Bulldog™ is the economical choice. This is the perfect mop to choose toupgrade from a cut-end mop to a looped-end mop, and is ideal for general purpose cleaning.


6.25"

5"

4-ply

Polyester

Pre-shrunk.

6.25"

5"4-ply

Polyester

6.25"1.25"

4-ply

Polyester

Laundering notrecommended.

6.25"

5"

4-ply

001_028 10/1/10 3:46 AM Page 18

517

517


19

ABSORBO™ ROUGH SURFACE

This mop is perfect for concrete, raised tile, or rubber floors. It is three times more absorbent than conven-tional 100% cotton mops, and is lint free. Durable 100% cotton non-woven material is biodegradable.

Rough Rider™ MopsPremiumLint Free Utility FanNew generation wet mop features knitted strands that out-perform and outlast conventional wet mops.

Rough Rider™ stands up to any floor surface including stone, concrete, raised and textured.

ROUGH RIDER™

Premium/Lint - Durable nylon/synthetic material is highly absorbent. Ideal for health care, aswell as concrete and raised floor surfaces. Low lint material also makes it ideal for electronic,graphic and optical environments.

Utility Fan With Welting Cord - Very absorbent cotton strands make the Utility Fan great forfood service and other general maintenance uses. Economical mop delivers high performancefor maximum mopping efficiency.

5" Mesh 1.25" Tape 5" Mesh 1.25" TapePremium/Lint Free Premium/Lint Free Utility Fan Utility Fan Pack Case Case

Brand Item Number Item Number Item Number Item Number Size Case Weight CubeWilen A03202 A03212 A03302 A03312 Medium 12 15.00 lbs. 1.813

Wilen A03203 A03213 A03303 A03313 Large 12 18.00 lbs. 1.813

6.25"

5"

6.25"

5"

PolyesterWelting

Cord

Item Yarn Pack Case CaseBrand Number Size Color Case Weight CubeWilen A03151 Small Blue 12 8.00 lbs. 0.920

20"

SUPER LOOPER™

Designed for easy access into tight spaces. The Super Looper™ mop goes where conventionalmops can’t and saves you money by using standard threaded handles. It also saves labor byusing blended looped-end yarn and a tailband to cover more surface area and soak up to threetimes more liquid than cut-end mops while outlasting them over eight times. Perfect forrestaurants, hotels, restrooms, offices, classrooms, or anywhere a small mop is needed.

8 oz. /4-ply

Polyester

Laundering notrecommended.

Wide Band Narrow Band Yarn Pack Case CaseBrand Item Number Item Number Size Color Case Weight CubeWilen A42302 A42312 Medium White 12 8.00 lbs. 1.290



6.25"

5"

1-ply

Cotton

001_028 9/18/10 10:13 AM Page 19

518

518

20

Floor Finish Wet Mops

Economy Line Finish Mops

SMOOTHIE™ FINISH

Worker fatigue can be reduced by 20 to 25% due to the incredibly smooth application of the Smoothie™. This 100% nylon 2-ply yarn holds finish with surface tension, not

by absorption. As the mop is moved along the floor surface, finish is released more evenlyand completely.

FASTTRACK™ FINISH

Upgrade your finish with FastTrack™, the durable, looped-end wet mop especially designed for applyingfinish. Constructed of a 6-ply, high-wet modulus rayon blend that provides quick, controlled liquid release

for finishing and disinfecting. Blue and white “candy cane” striped yarn keeps mop looking new.

1.25" Tape Band Yarn Pack Case CaseBrand Item Number Size Color Case Weight CubeWilen A03612 Medium White 12 15.00 lbs. 1.813

Wilen A03613 Large White 12 18.00 lbs. 1.813

LIQUID APPLICATION MOPSWhen it’s time to apply finishes and sealers, use a tool designed for the job. Our conventional style finish

mops provide a smooth, clean finish while outlasting conventional cut-end mops over eight times.For larger finish jobs, the Floor Finish Flat Mop provides performance and economy. You’ll get a better

finish with less effort.

5" Mesh Band 1.25" Tape Band Yarn Pack Case CaseBrand Item Number Item Number Size Color Case Weight CubeWilen A03501 A03511 Small Blue/White 12 10.00 lbs. 1.290

Wilen A03502 A03512 Medium Blue/White 12 15.00 lbs. 1.813

Wilen A03503 A03513 Large Blue/White 12 18.00 lbs. 1.813




Wilen A03704 A03714 X-Large Blue/White 12 23.00 lbs. 2.828




Wilen A11404 A11414 X-Large Blue/White 12 23.00 lbs. 2.828

J.W. ATOMIC™ FINISH

100% synthetic yarn designed for applying finish. Blue and white “candy cane” striped yarn keeps moplooking new.

Laundering not recommended. LOOPED-END FINISH

Our most economical looped-end finish mop is constructed of a durable, 4-ply rayon blend yarn thatreleases more liquid for a faster, smoother finish than possible with a conventional mop. Also ideal forapplying sealers and disinfectants. Blue and white “candy cane” striped yarn keeps mop looking new.

6.25"1.25"

2-ply

TapelessTailband

6.25"1.25"

6-ply

TapelessTailband

6.25"1.25"

4-ply

TapelessTailband

6.25"

1.25"

4-ply

TapelessTailband

001_028 9/18/10 10:13 AM Page 20

519

519


21

Cut-End MopsINDUSTRY STANDARD FAN MOPS

CUT-END

We offer the widest variety of cut-end mops in the industry. Whether you need an economical,disposable mop for extra dirty jobs or a durable 8-ply mop for rough floors, there’s a mop forthe job. All mops feature high quality materials and superior construction.

Cut-End Fan MopsSTANDARD MOP WITH TAILBAND

CUT-END FAN

Our labor saving fan mops feature four-sewn tailbands that keep yarn strands fanned out forgreater coverage and less tangles. Listed below are our most popular yarns, from cotton for all-purpose use, to rayon for economical finish applications. All mops are 4-ply except for the U.S.Cotton Leader Fan which is 8-ply.

Scrubbing pads availableon any mop with wide head-bands for an additional fee.Ideal for removing stubborndirt and marks

Industrial 8-Ply Texray Rayon 4-PlyCalifornia 8-Ply Stinger Cotton 4-PlyBlendex 4-Ply

Industrial Industrial California California8-Ply Cotton 8-Ply Cotton 8-Ply Cotton 8-Ply Cotton5" Mesh Band 1.25" Tape 5" Mesh Band 1.25" Tape Pack Case Case

Brand Item Number Item Number Item Number Item Number Size Case Weight CubeWilen A405016 A405116 A410016 A410116 16 oz. 12 12.00 lbs. 1.813

Wilen A405020 A405120 - - - - - - 20 oz. 12 15.00 lbs. 1.813

Wilen A405024 A405124 A410024 A410124 24 oz. 12 18.00 lbs. 1.813

Wilen A405032 A405132 A410032 A410132 32 oz. 12 24.00 lbs. 1.813

GoGoBlend GoGo Blend Stinger Stinger Texray TexrayNatural 4-Ply Natural 4-Ply 4-Ply Cotton 4-Ply Cotton 4-Ply Rayon 4-Ply Rayon5" Mesh Band 1.25" Tape 5" Mesh Band 1.25" Tape 5" Mesh Band 1.25" Tape Pack Case Case

Brand Item Number Item Number Item Number Item Number Item Number Item Number Size Case Weight CubeWilen - - - - - - A401012 A401112 A414012 A414112 12 oz. 12 9.00 lbs. 1.290

Wilen A419016 A419116 A401016 A401116 A414016 A414116 16 oz. 12 12.00 lbs. 1.813




Wilen - - - - - - A901012 A901112 A911012 A911112 #16 12 9.00 lbs. 1.290

Wilen - - - - - - A902016 A902116 A912016 A912116 #20 12 12.00 lbs. 1.290

Wilen - - - - - - A903020 A903120 A913020 A913120 #24 12 15.00 lbs. 2.265

Wilen - - - - - - A904028 A904128 A914028 A914128 #32 12 21.00 lbs. 2.262

GoGo Blend GoGo Blend T U.S. CottonNatural Fan Natural Fan Rayon Fan Leader Fan5" Mesh Band 1.25" Tape 1.25" Tape 1.25" Tape Pack Case Case

Brand Item Number Item Number Item Number Item Number Size Case Weight CubeWilen A202016 A202116 A203116 A207116 16 oz. 12 12.00 lbs. 1.813

Wilen A202020 A202120 A203120 A207120 20 oz. 12 15.00 lbs. 1.813

Wilen A202024 A202124 A203124 A207124 24 oz. 12 18.00 lbs. 1.813

Wilen A202032 A202132 A203132 A207132 32 oz. 12 24.00 lbs. 1.813

PolyesterTailband

5"

6.25"

1.25"6.25"

001_028 9/18/10 10:13 AM Page 21

520

520

22

Cotton Cotton Rayon Rayon5" Mesh Band 1.25" Tape 5" Mesh Band 1.25" Tape Pack Case Case

Brand Item Number Item Number Item Number Item Number Size Case Weight CubeWilen A927010 A927110 A928010 A928110 #16 12 7.00 lbs. 0.808

Wilen A937014 A937114 A938014 A938114 #20 12 10.00 lbs. 0.534

Wilen A947018 A947118 A948018 A948118 #24 12 13.00 lbs. 1.506

Wilen A957024 A957124 A958024 A958124 #32 12 18.00 lbs. 2.001

CHOICE™ CUT-END

This low end, cut-end mop is great for economical general cleaning and disinfecting.

6.25"

5"

6.25"

5"

4-Ply Cotton4-Ply Rayon

Go Go™ Cut-End MopsLow cost, high quality cut-end mops feature colored yarn to keep mop looking new. With no break-in

required, these absorbent, tough mops go to work right away. Great for all-purpose cleaning.

Pinnacle™ Cut-End MopsTHE MOP THAT LIES FLAT

GO GO™ CUT-END

Colored Go Go™ Cut-End - Wide or narrow headbands accommodate any type handle.Colored yarn helps maintain clean appearance. Use with Pinnacle™ Handle.

Colored Go Go™ Pinnacle - These No Marr Pinnacle mops are designed to lie flat on the floorand feature colored yarn to keep mops looking new. Screw connector attachment provides fast

changing of heads. Use with Pinnacle™ Handle.

5" Mesh Band 1.25" Tape No Marr Pinnacle Yarn Pack Case CaseBrand Item Number Item Number Item Number Size Color Case Weight CubeWilen A427016 A427116 A427316 #16 Blue 12 9.00 lbs. 1.290

Wilen A427024 A427124 A427324 #24 Blue 12 15.00 lbs. 2.265

Wilen A427032 A427132 A427332 #32 Blue 12 18.00 lbs. 2.828

Wilen A430016 A430116 A430316 16 oz. Blue 12 12.00 lbs. 1.813




Wilen A428016 A428116 - - - #16 Green 12 9.00 lbs. 1.290



Wilen A431016 A431116 - - - 16 oz. Green 12 12.00 lbs. 1.813




6.25"

5"

6.25"

5"

4-Ply

4-Ply

PINNACLE™

Pinnacle™ wet mops lie flat on the floor and utilize a screw-on attachment that provides fast, efficient changing of mop heads. No Marr style eliminates marring of floors,

baseboards and furniture, and is standard. Use with Pinnacle™ handle.

6.25"1.25"

4-Ply

Pinnacle™Screw

E Cotton P RayonNo Marr Pinnacle™ No Marr Pinnacle™ Yarn Pack Case Case

Brand Item Number Item Number Size Color Case Weight CubeWilen A503316 A504316 16 oz. White 12 12.00 lbs. 1.813

Wilen A503320 A504320 20 oz. White 12 15.00 lbs. 1.813



001_028 9/18/10 10:13 AM Page 22

521

521


23

PINNACLE™ FAN

Same as the previous Pinnacle™ mops, except for the addition of a tailband to keep yarn spreadand minimize tangles and loose strands. No Marr style standard. Use with Pinnacle Handle.

Leader/US Cotton Rayon Fan GoGo Blend Neural FanNo Marr Pinnacle™No Marr Pinnacle™No Marr Pinnacle™ Yarn Pack Case Case

Brand Item Number Item Number Item Number Size Color Case Weight CubeWilen A551316 A552316 A555316 16 oz. Natural 12 12.00 lbs. 1.813

Wilen A551320 A552320 A555320 20 oz. Natural 12 15.00 lbs. 1.813



Yacht MopTHE POPULAR MOP ON A STICK

YACHT MOP

Cord tied yarn is securely attached to a wood handle and provides long service. Choose eithercotton or rayon yarn. Ideal for infrequent users, such as small stores, offices and garages. Sizes12 and 16 ounce are standard with 15/16" x 48" handle. Sizes 24 and 32 ounce are standardwith 11/8" x 54" handle.

Wet Mop HandlesUse Stirrup Style mop handles with Narrow Band mops.Use Jaws Style mop handles with Wide Band mops.

COLOR GUARD® WET MOP HANDLE

The U.S. Department of Agriculture, through its Hazard Analysis Critical Control Points(HACCP) has recognized the need for a sanitation program to prevent cross-contamination.Our Color Guard® handles are offered in four different colors in both #94 Speed Change™and SuperJaws™ head styles. All handles are 1"x 60" fiberglass.

Leader RayonWood Handle Wood Handle Yarn Pack Case Case

Brand Item Number Item Number Size Color Case Weight CubeWilen A605012 A606012 12 oz. White 6 18.00 lbs. 3.761




6.25"1.25"

4-Ply

4-Ply

PolyesterTailband

Pinnacle™Screw

Yarn StringTie

#94 Speed Change™ Super Jaws™Item Item Handle Pack Case Case

Brand Number Number Color Case Weight CubeWilen A70342 A70642 Blue 12 22.00 lbs. 2.682

Wilen A70352 A70652 Red 12 22.00 lbs. 2.682

Wilen A70362 A70662 Green 12 22.00 lbs. 2.682

Wilen A70312 A70612 Yellow 12 22.00 lbs. 2.682

HACCP Color-coded handles prevent cross-contamination.

#94 Speed Change™ is recommendedfor narrow head bands.

Super Jaws™ is recommended forwide head bands.

001_028 9/18/10 10:13 AM Page 23

522

522

24

10"

7.5"

6.5"

5.5"

Release Lever

10"

7.5"

5"

6.5"

11.5"

7.5"

#94 STIRRUP QUICK-CHANGE™

High-impact plastic head features a convenient thumbwheel adjustment. Heavy-duty construc-tion provides long life. Wide head accommodates any size mop. The added advantage of a

hinged yoke speeds mop changes. Recommended for narrow headbands.

Item Handle Pack Case CaseBrand Number Handle Size Case Weight CubeWilen A70212 Fiberglass 1" x 60" 12 22.00 lbs. 2.682

LOAD ’N LOCK™

High-impact plastic head features a side release gate for fast and easy mop changes. Mopssimply slide off without having to touch them. Features an easy to use thumbwheel adjustment.

Recommended for narrow headbands.

Item Handle Pack Case CaseBrand Number Handle Size Case Weight CubeWilen A71612 Fiberglass 1" x 60" 12 19.00 lbs. 2.682

#94 SPEED CHANGE™

High-impact plastic head features a side release gate for fast and easy mop changes. Mopssimply slide off without having to touch them. Features an easy to use thumbwheel adjustment.

Recommended for narrow headbands.

Item Handle Pack Case CaseBrand Number Handle Size Case Weight CubeWilen A70302 Wood 1" x 60" 12 22.00 lbs. 2.682

Wilen A70312 Fiberglass 1" x 60" 12 22.00 lbs. 2.682

Wilen A70322 Vinyl Coated Steel 1" x 60" 12 22.00 lbs. 2.682

STALLION™

Tough plastic construction eliminates rust and corrosion. Durable fiberglass composite latchassures long life and makes mop changes fast and easy. Recommended for narrow headbands.

Item Handle Pack Case CaseBrand Number Handle Size Case Weight CubeWilen A70412 Fiberglass 15/16" x 60" 12 22.00 lbs. 2.506

BREAK-A-WAY MOP HANDLE

Easy side loading and hands free unloading without touching a soiled mop. Large thumb wheelcontrols tension. All plastic construction will not mark surfaces. Serrated corner for gripping a

scour pad. Ideal for mops with a narrow head band.

Item Handle Pack Case CaseBrand Number Handle Size Case Weight CubeCMC 605 Wood 11/8" x 561/2" 12 20.88 lbs. 2.682

CMC 607 Fiberglass 11/8" x 541/2" 12 18.36 lbs. 2.682

CMC 608 Fiberglass 11/8" x 60" 12 18.30 lbs. 2.682

001_028 9/18/10 10:13 AM Page 24

523

523


25

8.5"

8.25"

3"

11.5"

7.5"

4.25"

10"

6.5"

6.75"

NIGHT STICK MOP HANDLE

Non-corrosive, lightweight plastic with easy thumbwheel action for quick release of mop head.Ideal for mops with a narrow head band.

Item Handle Pack Case CaseBrand Number Handle Size Case Weight CubeCMC 596 Fiberglass 11/8" x 64" 12 18.12 lbs. 2.760

CMC 598 Wood 11/8" x 611/2" 12 20.40 lbs. 2.760

SUPERJAWS™

Extra durable nylon construction assures long life for this jaw style handle. Recommended for wide headbands.

Item Handle Pack Case CaseBrand Number Handle Size Case Weight CubeWilen A70602 Wood 15/16" x 60" 12 22.00 lbs. 2.506


Wilen A70622 Vinyl Coated Steel 1" x 60" 12 22.00 lbs. 2.506

SUPERJAWS™ MOP HANDLE

Extra durable plastic construction assures long product life. Ideal for mops with awide head band.

Item Handle Pack Case CaseBrand Number Handle Size Case Weight CubeCMC 600 Fiberglass 11/8" x 541/2" 12 15.84 lbs. 2.760

CMC 601 Fiberglass 11/8" x 60" 12 16.80 lbs. 2.760

SPRING YOKE MOP HANDLE

Zinc plated steel head with wood or fiberglass handle. Quick mop loading and removal withouttouching soiled mop head. Ideal for mops with a narrow head band.

Item Handle Pack Case CaseBrand Number Handle Size Case Weight CubeCMC 571 Wood 11/8" x 60" 12 32.16 lbs. 2.760

CMC 573 Fiberglass 1" x 60" 12 20.52 lbs. 2.760

METAL STIRRUP QUICK CHANGE™

Same as the regular Stirrup except for a quick release bar (yoke) to facilitate fast mopchanges. This popular, heavy-duty handle provides durability with efficiency. Recommendedfor narrow headbands.


CMC 770 Wood 11/8" x 63" 12 31.32 lbs. 2.760

CMC 772 Steel 1" x 63" 12 32.40 lbs. 2.760

001_028 9/18/10 10:13 AM Page 25

524

524

26

SUREGRIP™

4" wide plated head. Features an adjustable spring clamp and is rust resistant. Jaws openwide to accommodate any size mop. Stainless Steel Suregrip™ features push-button, break aparthandle to allow for sterilization in small autoclave units. Recommended for wide headbands.



Wilen A71022 Vinyl/Alum. 1" x 60" 12 28.00 lbs. 2.5067.5"

5"

4"

PINNACLE™

Metal threaded connector is countersunk into wood handle for fast and efficient mop headchanges. For use with Pinnacle mops.


2"

1"

Floor Finish ApplicatorsLABOR SAVING APPLICATOR

Even the best floor finish will provide poor results when applied with an inadequate tool. That’s why we offerthese professional finishing products. Whether you’re applying finish, disinfectant, sealer or any other liquid,

you’ll not only get much better results, but also unmatched labor savings.

WAX-O-MATIC®

This professional finish application machine applies both water and solvent based fluids includ-ing finishes, sealers, urethanes, restorers and disinfectants, quickly, easily and smoothly. The

straight line method, with built-in edge feathering, covers many times the area of conventionalmethods-without the spills, drips and baseboard splashes! Push button dispensing and

replaceable wick pads provide complete control of finish thickness. The Wax-O-Matic® coversabout 30,000 square feet per hour and comes with a three gallon tank. Wick pads and manual

included. Warrantied for one full year. Some assembly required. Comes standard with one set(two pads) of Ultra Refills.

Item Pack Case CaseBrand Number Item Case Weight CubeWilen B608004 Complete 1 14.00 lbs. 1.995

Wilen B610000 Extra Heavy Refill (Lambswool) 2 1.00 lbs. 0.376

Wilen B611000 Ultra refill (Velour) 2 1.00 lbs. 0.376

FLOOR FINISH FLAT MOP

For larger finish jobs, the Floor Finish Flat Mop provides performance and economy. Thislooped-end mop is constructed of a high-wet modulus rayon blend yarn that provides quick,controlled liquid release. The Floor Finish Flat Mop effectively covers up to a 72" wide swath.Rayon finish mop features a mesh backing that allows you to pour finish directly into mop for

better dispersal of fluids.

Item Pack Case CaseBrand Number Size Case Weight CubeWilen B601018 18" x 5" 12 12.00 lbs. 1.290

Wilen B601024 24" x 5" 12 15.00 lbs. 1.812

Extra Heavy

Ultra Smooth

4 8"

5"

11"

30"

Open Back with Snaps

Net Mesh Backing

001_028 9/18/10 10:13 AM Page 26

525

525


27

SOLUTION SAVER

Solution Saver conserves floor care chemicals by allowing the use of small amounts of chemicaland eliminating chemical contamination. High-impact plastic container has a sloped “wring ramp”to help remove excess liquid from applicator. Solution Saver has a three gallon capacity andfeatures 2" locking casters, carrying handles and a pour spot with cap for easy removal of liquid.

Item Pack Case CaseBrand Number Color Case Weight CubeWilen B603000 Yellow 1 10.00 lbs. 2.460

Optional Wall Hugger™(23 gallon Receptacle) can

be added as rigid plasticliner in place of the vinyl

bag - without use of toolsor additional hardware.

Fits 184 & 186 Carts.

29.5"

24.5"12"

16"

6"

Replacement partsnot available.

Wet Mop Accessories

LAUNDRY NET

100% polyester net with drawstring lock closure. Helps prevent tangles and damage whenlaundering mops. Also ideal for laundering other items.

Item Pack Case CaseBrand Number Size Color Case Weight CubeWilen A80803 24" x 36" White 12 10.00 lbs. 1.290

Janitorial Carts

COMPACT CLEANING CART

This cart is both space efficient and versatile enough for nearly any job. Designed to accommo-date common cleaning items and waste collection, this cart is ideal for use in confined areaswith limited storage space.

Item Pack Case CaseBrand Number Size Color Case Weight CubeCMC 182GY 431/2" x 203/4" x 38" Grey 1 31.00 lbs. 5.360

CMC 182BL 431/2" x 203/4" x 38" Blue 1 31.00 lbs. 5.360

JANITORS’ CART

This cart is the workhorse of the industry! Designed to accommodate and organize tools andsupplies required by today’s stringent facility managers. Over-sized wheels and casters makethis cart the logical choice for heavy-duty applications in healthcare, airports, conventioncenters, theaters, shopping centers, office buildings and more!


CMC 184BL 555/8" x 203/4" x 38" Blue 1 38.00 lbs. 6.400

182GY

184GY

001_028 9/18/10 10:13 AM Page 27

526

526

CONVERTIBLE JANITOR CART

The only plastic cart in the industry that has a dual front tray to easily accommodate a combi-nation of cleaning accessories including: 26 or 35 quart Splash Guard™ Mopping Combos, the

Unibody® Mopping System, the 32 or 44 gallon Huskee™ and 44 gallon Huskee™ SuperKan™

(with or without the dolly).


CMC 186BL 737/8" x 203/4" x 38" Blue 1 43.00 lbs. 6.770

PORT-A-CART

Structural plastic shelves and a steel frame make this cart durable and economical.Features 3" swivel casters and a four bushel, yellow duck bag. (Shown with a

266-36 combo - not included).

REPLACEMENT DUCK BAG

Item Pack Case CaseBrand Number Size Color Case Weight CubeCMC 271 391/2" x 18" x 34" Blue 1 24.63 lbs. 3.290

CMC 29 37 gal. (4 bushel) Yellow 6 5.46 lbs. 0.760

ACCESSORIES

Optional locking compartment (187YW) with dual wall construction provides a high levelof security where needed. The CCP 184 and 186 Carts will accept two optional locking

compartments.

Ergonomic bag (188YW) zips open completely to easily remove heavy contents and avoidback injury. 25 gallon capacity. Fits 182, 184 and 186 Carts.

Item Pack Case CaseBrand Number Item Color Case Weight CubeCMC 187YW Janitorial Lock Box Yellow 1 6.00 lbs. 0.620

CMC 188YW Zippered Vinyl Bag Yellow 6 8.06 lbs. 0.490


28

186BL

187YW

188YW

001_028 9/18/10 10:13 AM Page 28

527

527

90

Huskee™

SuperKan™

Colossus®

King Kan®

Corner’Round™

Roun’, Flat’, Funnel’Tops

Step-On

Wall Hugger™

90-93

91

9499

95

95

96-97

97

97-98

Swingline™

Ash Receptacles &Sand Urns

UL Classified

Steeline™

CommercialPlastic

Tilt-N-Wheel™

Recycle

99

99-100

100

101-105

101

101

102-105

R EC E P TAC L E S

HUSKEE™ ROUND

Molded of engineered resins with seamless construction, the Huskee™ is a strong, long lastingreceptacle used by virtually every industry. From food prep to foundries, from refuse to bio-

hazard waste, the Huskee™ keeps on working. Stackable with lid on, nestable with lid off.

For Huskee™ Accessories, see page 92.

Huskee™ Round & Lids

NSF

NSF®�

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC *1001GY 10 gal. Grey 6 19.14 lbs. 5.400

CMC *1001WH 10 gal. White 6 19.14 lbs. 5.400

CMC *2000BL 20 gal. Blue 6 38.76 lbs. 11.220

CMC *2000GY 20 gal. Grey 6 38.76 lbs. 11.220




CMC *3200GY BP 32 gal. Grey 48 / Bulk 423.84 lbs. 105.120

CMC *3200RD 32 gal. Red 6 57.60 lbs. 16.690


CMC *3200YW 32 gal. Yellow 6 57.60 lbs. 16.690



CMC *4444GY BP 44 gal. Grey 32 / Bulk 392.32 lbs. 125.120

CMC *4444RD 44 gal. Red 4 50.48 lbs. 21.040



CMC 5500GY 55 gal. Grey 3 52.44 lbs. 21.720

*Items are NSF ® Listed

Built-in Huskee™ Bag Cinch eliminates the need to tie knotsin the polyliner to keep it secure around the receptacle rim!Available on 32, 44 and 55 gallon sizes.

PhoenixRecycles


090_105 9/18/10 8:35 AM Page 94

528

528

SuperKan™

Item Pack Case CaseBrand Number Fits Color Case Weight CubeCMC *1002GY 10 gal. Grey 6 5.40 lbs. 1.200





CMC *3201RD 32 gal. Red 6 13.80 lbs. 3.240




CMC *4445RD 44 gal. Red 4 11.24 lbs. 2.560




*Items are NSF® Listed

SUPERKAN™ MATERIAL HANDLER

The Huskee™ SuperKan™ Material Handler is the strongest, safest and smartest receptacleavailable on the market today.

NEW! SUPERKAN™ BACKSAVERThis receptacle is everything the standard Huskee™ Round is, and more! Internal vent ribs,which break the vacuum caused when removing a poly liner, were incorporated into thedesign, making it the easiest receptacle to use.

Both SuperKan™ receptacles are compatible with the Huskee™ Round Dolly, Caddy Bag,Maid Caddy, 32 or 44 gallon Huskee™ Round Lid, Huskee™ Dome and Funnel Tops.

Item Pack Case CaseBrand Number Capacity Style Color Case Weight CubeCMC *4442BK 44 gal. Material Handler Black 4 54.00 lbs. 25.010


Item Pack Case CaseBrand Number Capacity Style Color Case Weight CubeCMC 3210GY 32 gal. BackSaver Grey 4 35.50 lbs. 18.407

CMC 4410GY 44 gal. BackSaver Grey 3 38.75 lbs. 20.972

Huskee™ Round Lids

NSF

NSF®�

NSF

NSF®�

When used with Continental® Dome Top

SAFER!The National Safety Council puts the total cost of work injuries at

$121 billion annually, and the cost per disabling injury at $26,000, andgrowing. Back injuries are 20% of all claims. The SuperKan™

BackSaver (3210GY & 4410GY) uses internal, ergonomic lift vents tobreak the vacuum created when removing a polyliner, resulting in

reduced effort and reduced risk of back injury.

Built-in Huskee™ Bag Cincheliminates the need to tieknots in the polyliner tokeep it secure around thereceptacle rim!

“INEDIBLE” HUSKEE™ ROUND

32 and 44 gallon Huskee™ pre-printed with “Inedible”. Lettering is 3" high.

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC *3200GYINED 32 gal. Grey 48/Bulk 423.84 lbs. 105.120

CMC *4444GYINED 44 gal. Grey 32/Bulk 392.32 lbs. 125.120


NSF

NSF®�

91

090_105 9/18/10 8:35 AM Page 95

529

529

92

Huskee™ Accessories

HUSKEE™ MAID CADDY

This handy Huskee™ accessory has a convenient handle to raise and carry or collapse out ofthe way. Fits on Round or Square Huskee™ receptacles and the 50 gallon Tilt-N-Wheel™.

Item Pack Case CaseBrand Number Color Case Weight CubeCMC 3155 Grey 4 12.50 lbs. 2.130

Huskee™ Covers

HUSKEE™ DOME TOP

The economic answer wherever large refuse collection in public places is required.Conveniently sized to fit our 32, 44 and 55 gallon Huskee™ receptacles. The 44 gallon model

Dome Top also fits 55 gallon metal drums. The wide rim and tight fitting door with rain deflectorkeeps debris and odors in and rain and pests out.

Item Pack Case CaseBrand Number Fits Color Case Weight CubeCMC 3232BL 32 gal. Blue 2 12.84 lbs. 7.870

CMC 3232BK 32 gal. Black 2 12.84 lbs. 7.870


CMC 3232RD 32 gal. Red 2 12.84 lbs. 7.870

CMC 4456BL 44 gal. Blue 2 14.72 lbs. 10.070



CMC 4456RD 44 gal. Red 2 14.72 lbs. 10.070

CMC 5550BL 55 gal. Blue 2 19.36 lbs. 13.030



CMC 5550RD 55 gal. Red 2 19.36 lbs. 13.030

HUSKEE™ CADDY BAG

Add this adjustable nine pocket caddy bag to a Round or Square Huskee™ on a dolly andyou’ve got a durable cleaning system ready to make the rounds. Made of nylon reinforced PVC

for years of reliable service.

Item Pack Case CaseBrand Number Color Case Weight CubeCMC 3175 Yellow 6 6.92 lbs. 2.200

HUSKEE™ ROUND DOLLY

The twist-on, twist-off Round Dolly converts a stationary Huskee™ into a mobile hard workingtool. It fits the 20, 32, 44 and 55 gallon Huskee™ Round and features five, 3" non-marking

swivel casters.

Item Pack Case CaseBrand Number Color Case Weight CubeCMC 3255 Black 2 17.06 lbs. 1.840

When used with Continental® SuperKan™Material Handler (4442)

090_105 9/18/10 8:35 AM Page 96

530

530

R EC E P TAC L E S

93

HUSKEE™ TIP TOP LID

Gravity, hands-free opening encourages use and automatically closes to hide trash. No metalparts to rust or break.

Item Pack Case CaseBrand Number Fits Color Case Weight CubeCMC 3231 32 gal. Grey 6 25.92 lbs. 5.280

HUSKEE™ FUNNEL TOP

Designed for high volume applications, this open top funnel lid handles indoor applicationsranging from food service to industrial.

Item Pack Case CaseBrand Number Fits Color Case Weight CubeCMC 3233GY 32 gal. Grey 4 12.20 lbs. 2.640


HUSKEE™ SQUARE

These containers are ideal for food handling, hospital, bio-hazard, commercial refuse andrecycle collection. All Square Huskee™ receptacles are stackable with lids and nestablewithout lids. Lids snap and lock in place keeping refuse and odor in, animals and pests out.This container is easy to clean and has a molded in bottom grip for comfortable lifting.Heavy-duty, non-slip handles have drain holes.

HUSKEE™ SQUARE DOLLY

The twist-on, twist-off Square Dolly converts a stationary Huskee™ into a mobile, hard-workingtool. It fits all Square Huskee™ Receptacles and features four 3", non-marking, swivel casters.

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC 2800GY 32 gal. Grey 6 59.64 lbs. 17.220

CMC 2800RD 32 gal. Red 6 59.64 lbs. 17.220

CMC 2800WH 32 gal. White 6 59.64 lbs. 17.220


CMC 4000RD 48 gal. Red 4 59.12 lbs. 20.040



CMC 2801GY fits 32 gal. Grey 6 17.70 lbs. 3.060

CMC 2801RD fits 32 gal. Red 6 17.70 lbs. 3.060

CMC 2801WH fits 32 gal. White 6 17.70 lbs. 3.060


CMC 4001RD fits 48 gal. Red 4 13.40 lbs. 2.400


Huskee™ Square

HUSKEE™ SQUARE DOME TOP LID

Economical answer wherever high volume applications are required. This new Dome Top fitsthe 55 gallon Square Huskee™ Receptacles.

Item Pack Case CaseBrand Number Fits Color Case Weight CubeCMC 5556GY 55 gal. Grey 1 13.30 lbs. 5.900

HUSKEE™ SQUARE FLAT LID

PhoenixRecycles


090_105 9/18/10 8:35 AM Page 97

531

531

94

HUSKEE™ SQUARE LOCK LID

New lock-lid offers extra tight fit on 32 gallon Square Huskee™. Ideal for bio-medical wastehauling. Four handle design locks on all edges of the Huskee™ for secure locking fit.

The Colossus® Receptacle with four openings has two large front openings (17 1⁄2" x 9 1⁄16" high)and two large side openings (13 3⁄8" x 8 15⁄16" high), which can easily accommodate bulky debris

like pizza boxes, 32 ounce cups and food service trays – this unit is truly designed for highvolume applications! The contoured lid’s top surface prevents accumulation of debris and water

while providing a unique and visually appealing style.

The Colossus® Receptacle with spring-loaded doors is Factory Mutual Approved, because ofits doors’ tight fit to the lid and the lid fit to the base. The heavy-duty door springs keep doors

closed tight to keep odors in and pests out.

Item Pack Case CaseBrand Number Color Case Weight CubeCMC 2811RD* Red 6 17.70 lbs. 3.060

*Custom item - call for details.

Colossus®The Colossus® Receptacle is available with four openings, or with two spring loaded doors. Both versions

are available as a 45 or 56 gallon receptacle, to meet any capacity requirement. Dual vinyl-coated cable lidstays hold the lid in a vertical position for safe, easy emptying, and help eliminate tipping of the base.

Heavy-duty poly liner retainer straps allow the user to secure a poly liner within the container for a clean,professional appearance.

COLOSSUS®

6564BE

6452BN

Heavy-duty polyliner retainer straps Dual Vinyl-coated

cable lid stays

6457BKOptional Tray Top is designed toaccommodate food service trays upto 12.5" x 17.5"

6458BKOptional Ash Tray Top

6456BKWeighted Base can be filled withsand or gravel, adding approxi-mately 17 pounds of weight for sta-bility when unit is used outdoors.

*Colossus® Receptacle with twospring loaded doors only

6451BK / 6561BKRigid Plastic Liner

Item Pack Case CaseBrand Number Item Capacity Color Case Weight CubeCMC *6452BE Two Doors 45 gal. Beige 1 41.00 lbs. 18.760

CMC *6452BN Two Doors 45 gal. Brown 1 41.00 lbs. 18.760

CMC 6454BE Four Openings 45 gal. Beige 1 37.00 lbs. 18.760

CMC 6454BN Four Openings 45 gal. Brown 1 37.00 lbs. 18.760

CMC *6562BE Two Doors 56 gal. Beige 1 58.00 lbs. 21.010

CMC *6562BN Two Doors 56 gal. Brown 1 58.00 lbs. 21.010

CMC 6564BE Four Openings 56 gal. Beige 1 44.00 lbs. 21.010

CMC 6564BN Four Openings 56 gal. Brown 1 44.00 lbs. 21.010

Item Pack Case CaseBrand Number Item Size Color Case Weight CubeCMC 6451BK Rigid Liner / 45 gal. 211/2" x 201/2" x 241/4" Black 1 12.20 lbs. 6.660

CMC 6561BK Rigid Liner / 56 gal. 211/2" x 201/2" x 291/2" Black 1 13.68 lbs. 7.830

CMC 6456BK Weighted Base 153/4" x 131/4" x 3" Black 1 3.20 lbs. 0.420

CMC 6457BK Tray Top 181/2" x 145/8" x 23/8" Black 1 2.00 lbs. 0.430

CMC 6458BK Ash Tray Top 131/2" x 131/4" x 25/8" Black 1 1.50 lbs. 0.340

COLOSSUS® ACCESSORIES

Ash Tray Top and Tray Top easily attach to any Colossus® Receptacle. Rigid plastic linershave handle holes for easy lifting and dumping. Weighted Base can be filled with sand or

gravel, adding approximately 17 lbs. of weight for stability, when unit is used in outdoorapplications.

PhoenixRecycles


090_105 9/18/10 8:36 AM Page 98

532

532

R EC E P TAC L E S

95

KING KAN®

Structural plastic allows the King Kan® to be used for both indoor and outdoor applications.Won’t dent, crack, chip or warp even under rough conditions. Add optional 3" non-markingcasters to the 35/50 gallon King Kan® for increased mobility. King Kan® lids feature twoheavy-duty plated steel hinges, which eliminate awkward lifting, removing and repositioningof the lid. The lid sits tightly on the base to control odors, insects and pests.

Item Pack Case CaseBrand Number Fits Color Case Weight CubeCMC *5735BE 35 gal. Beige 1 35.00 lbs. 7.720

CMC *5735BN 35 gal. Brown 1 35.00 lbs. 7.720

CMC *5750BE 50 gal. Beige 1 42.00 lbs. 9.970

CMC *5750BN 50 gal. Brown 1 42.00 lbs. 9.970

CMC 5765BN 65 gal. Brown 1 65.63 lbs. 14.480

KING KAN® ACCESSORIES

The Leg Kit is 2" high, with four pre-drilled epoxy coated steel legs. The rigid plastic liner hastwo handle holes for easy removal. Also available, a 54 gallon poly bag.

Item Pack Case CaseBrand Number Item Fits Case Weight CubeCMC 6451BK Rigid Plastic Liner 50/65 gal. 1 35.00 lbs. 7.720

CMC 5766L Leg Kit All sizes 1 35.00 lbs. 7.720

CMC 1924 Poly Bag 65 gal. 1 65.63 lbs. 14.480

King Kan®

Corner’Round™

*5735 and 5750 are FM Approved

5766L

1924

6451BK

CORNER’ROUND™

Fits into corners to utilize space. This durable plastic design will not chip, rust, crack, peelor fade. Its 21 gallon capacity and extra large opening make it ideal for school cafeterias, atri-ums, foyers, food courts, airport terminals, plazas, convention centers, etc. Choose between asecuring bag rim type or a hooded domed top lid. Complete product information on the dollywhich accommodates four receptacles is available on page 102.

Item Pack Case CaseBrand Number Item Capacity Color Case Weight CubeCMC 8324BE Rim 21 gal. Beige 2 22.50 lbs. 6.340

CMC 8324BK Rim 21 gal. Black 2 22.50 lbs. 6.340

CMC 8324BN Rim 21 gal. Brown 2 22.50 lbs. 6.340

CMC 8324GY Rim 21 gal. Grey 2 22.50 lbs. 6.340

CMC 8325BE Dome 21 gal. Beige 1 14.00 lbs. 4.810

CMC 8325BK Dome 21 gal. Black 1 14.00 lbs. 4.810

CMC 8325BN Dome 21 gal. Brown 1 14.00 lbs. 4.810

CMC 8325GY Dome 21 gal. Grey 1 14.00 lbs. 4.810

CMC 8325-D Dolly - - - Black 1 21.30 lbs. 5.160

PhoenixRecycles


*8325-D - detailed information on page 102.

090_105 9/18/10 8:36 AM Page 99

533

533

96

FUNNEL’TOP

This big mouth receptacle encourages use because of its appealing open, Funnel’Top design.With absolutely no metal parts, these containers are safe for secure areas in hospitals or prison

systems. They are available in color choices to compliment any decor. The unique “key-way”feature and shoulder design allows poly liner to be secured, hiding unsightly ‘bag skirt’. Plus,

the built-in lock ring secures Funnel’Top from theft or high winds.

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC 1430BE 24 gal. Beige 1 23.00 lbs. 6.520




ROUN’TOP™

With absolutely no metal parts, these containers are safe for secure areas in hospitals or prisonsystems. The Roun’Top™ is Factory Mutual Approved, designed to contain and extinguish a fire,

assuring safety. Available in either 18 or 24 gallon sizes to fit any need. Removable top allowseasy access. Unique “key-way” notch secures poly-liners with no clumsy straps to snag liners.

Weather-proof design allows outside use with confidence.

Item Pack Case CaseBrand Number Liner Capacity Color Case Weight CubeCMC 1305BE None 18 gal. Beige 1 17.50 lbs. 5.520

CMC 1305BK None 18 gal. Black 1 17.50 lbs. 5.520

CMC 1305BN None 18 gal. Brown 1 17.50 lbs. 5.520

CMC 1305GY None 18 gal. Grey 1 17.50 lbs. 5.520

CMC 1307BE Rigid Plastic 15 gal. Beige 1 24.50 lbs. 5.520

CMC 1307BK Rigid Plastic 15 gal. Black 1 24.50 lbs. 5.520

CMC 1307BN Rigid Plastic 15 gal. Brown 1 24.50 lbs. 5.520

CMC 1307GY Rigid Plastic 15 gal. Grey 1 24.50 lbs. 5.520

CMC 1425BE None 24 gal. Beige 1 23.50 lbs. 7.970

CMC 1425BK None 24 gal. Black 1 23.50 lbs. 7.970

CMC 1425BN None 24 gal. Brown 1 23.50 lbs. 7.970

CMC 1425GY None 24 gal. Grey 1 23.50 lbs. 7.970

CMC 1427BE Rigid Plastic 21 gal. Beige 1 39.50 lbs. 7.970

CMC 1427BK Rigid Plastic 21 gal. Black 1 39.50 lbs. 7.970

CMC 1427BN Rigid Plastic 21 gal. Brown 1 39.50 lbs. 7.970

CMC 1427GY Rigid Plastic 21 gal. Grey 1 39.50 lbs. 7.970

FLAT ’TOP & ASH’TOP

These receptacles have dual self-closing doors to keep debris and odor inside, pests out.The two door design encourages use. Removable top allows easy access with no clumsy

straps. Unit can be positioned for access to both sides. Factory Mutual fire resistant designcontains and extinguishes fires.





CMC 1435BE 24 gal. Beige 1 25.00 lbs. 7.970




Roun’, Flat’ & Funnel’Tops

1432 1435

090_105 9/18/10 8:36 AM Page 100

534

534

R EC E P TAC L E S

97

DESIGN-LINE ROUN’TOP™

These receptacles have all the features of the standard Roun’Top™, but are now available infour granite finishes that provide the architectural appeal of a concrete or stone receptaclewithout the excessive weight or cost. Available in 18 or 24 gallon sizes to fit any need, FactoryMutual and CSFM Approved.

STEP-ON

Allows for convenient and hygienic disposal of waste. Step pedal provides hands-free use. Canbe used with standard poly liners. 23 gallon has wheels and wire frame for ease of mobility.

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC 1305BKS 18 gal. Blackstone 1 17.50 lbs. 5.520

CMC 1305BNS 18 gal. Brownstone 1 17.50 lbs. 5.520

CMC 1305GYS 18 gal. Greystone 1 17.50 lbs. 5.520

CMC 1305SDS 18 gal. Sandstone 1 17.50 lbs. 5.520

CMC 1425BKS 24 gal. Blackstone 1 23.50 lbs. 7.970

CMC 1425BNS 24 gal. Brownstone 1 23.50 lbs. 7.970

CMC 1425GYS 24 gal. Greystone 1 23.50 lbs. 7.970

CMC 1425SDS 24 gal. Sandstone 1 23.50 lbs. 7.970

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC 18WH 18 gal. White 1 11.00 lbs. 4.800


CMC 18RD 18 gal. Red 1 11.00 lbs. 4.800

CMC 23WH 23 gal. White 1 13.00 lbs. 5.920


CMC 23RD 23 gal. Red 1 13.00 lbs. 5.920

Sandstone Brownstone Greystone Blackstone

Step-OnThe sturdy step pedal enables hands-free opening and closing of the receptacle lid, which makes it moresanitary. Aids in conforming to the OSHA regulation 1910.1030 known as “Occupational Exposure toBloodborne Pathogens”. Additionally, this line of receptacles is Factory Mutual (FM) and California State FireMarshal (CSFM) approved for fire safety. Lid closes securely to receptacle base, which keeps odors contained. Lid attachment is covered on top so dirt does not collect in hinge. 23 gallon version has coveredwheels for mobility and cleanliness. Unique “key-way” notch holds standard size polyliners.

CMC 15 18 gal. Black 1 5.80 lbs. 3.000

CMC 19 23 gal. Black 1 7.60 lbs. 3.780

RECEPTACLE LINERS

HALF ROUND WALL HUGGER™

The Half Round completes the popular Wall Hugger™ Line. Its smaller footprint and impressive21 gallon capacity is ideal for today’s space-efficient workplace. The rounded front and sidesallow use where other square or rectangular containers would interfere with traffic. The HalfRounds may be suspended off of the floor with our 8319 Mounting Bracket, found on page 98.



Wall Hugger™

PhoenixRecycles


12 23

090_105 9/18/10 8:36 AM Page 101

535

535

98

Item Pack Case CaseBrand Number Fits Case Weight CubeCMC 8319 #8321, 8322, H8322, 8316 & H8316 4 3.64 lbs. 0.040

Item Pack Case CaseBrand Number Fits Case Weight Cube


CMC 8320-4 Black 1 18.00 lbs. 3.525

WALL HUGGER™ MOUNTING BRACKET

CMC 7315GY Lid w/ Handles Grey 4 4.00 lbs. 1.000

CMC 7325BE Drop Shot Lid Beige 4 12.50 lbs. 1.600

CMC 7325BK Drop Shot Lid Black 4 12.50 lbs. 1.600

CMC 7325BN Drop Shot Lid Brown 4 12.50 lbs. 1.600

CMC 7325GY Drop Shot Lid Grey 4 12.50 lbs. 1.600

CMC T7318BNBE Push Door Lid Brown/ Beige 4 24.68 lbs. 4.160

CMC T7318GYGY Push Door Lid Grey/Grey 4 24.68 lbs. 4.160

WALL HUGGER™ LIDS

PhoenixRecycles


WALL HUGGER™

Continental® has updated the look of the Wall Hugger™, creating a sleek and attractive designthat holds either 16 or 23 gallons of waste, but protrudes less than one foot from the wall! The

smooth, seamless design provides prolonged life and promotes easy cleaning. The expandedline now includes a version with built-in handles which provide ease of transport and a securearea to grasp when lifting and dumping. The addition of a Wall Hugger™ Drop Shot Lid helps

to conceal waste while providing an inviting, enlarged opening for waste disposal.The 81/4" x 163/4" opening is the largest available in a Wall Hugger™ style receptacle!

Item Pack Case CaseBrand Number Item Color Case Weight CubeCMC 8316BE 16 gal. Beige 4 22.50 lbs. 5.050




CMC H8316BE 16 gal. w/handles Beige 4 23.20 lbs. 5.680

CMC H8316BK 16 gal. w/handles Black 4 23.20 lbs. 5.680

CMC H8316BN 16 gal. w/handles Brown 4 23.20 lbs. 5.680

CMC H8316GY 16 gal. w/handles Grey 4 23.20 lbs. 5.680





CMC H8322BE 23 gal. w/handles Beige 4 27.75 lbs. 7.150


CMC H8322BN 23 gal. w/handles Brown 4 27.75 lbs. 7.150

CMC H8322GY 23 gal. w/handles Grey 4 27.75 lbs. 7.150

T7318BNBE

7325GY

7315GY

8319

DOLLIES

The Wall Hugger™ line offers both Single and Quad-Collection Dollies. These attractive, blackpowder-coated steel Dollies have 3", non-marking, all swivel casters, enabling them to turn any

CMC Wall Hugger™ or competitive receptacle into a mobile waste collection system.

8320-4

8320

Built-in Bag Cinch eliminates the needto tie knots in the polyliner to keep itsecure around the receptacle rim!

090_105 10/1/10 5:12 AM Page 102

536

536

R EC E P TAC L E S

Swingline™SWINGLINE™

Square Swingline™ containers provide 25% more capacity which equates to labor and polyliner savings. The rolled rim provides strength and a convenient area to lift or pull. Reinforcedbase will take rough commercial use and they nest for easy storage. Compatible with the T1700Tip Top, 1600 Swing Top or 1702 Drop Shot lids.

Item Pack Case CaseBrand Number Fits Color Case Weight CubeCMC 25BE 25 gal. Beige 4 33.32 lbs. 8.440






SWING TOP LID

Swing Top’s opening makes refuse disposal easy. Peaked design is counter-weighted andautomatically closes to hide trash. Sloped surfaces discourage cigarette and waste accumulation.

Item Pack Case CaseBrand Number Fits Color Case Weight CubeCMC T1600BE #25 & #32 Beige 4 11.88 lbs. 4.160

CMC T1600BN #25 & #32 Brown 4 11.88 lbs. 4.160

CMC T1600GY #25 & #32 Grey 4 11.88 lbs. 4.160

DROP SHOT LID

Two door, center drop design with counter-weighted flippers opens easily and closes automati-cally. Large opening will accommodate up to a 16" pizza box, perfect for high volume areas.

Item Pack Case CaseBrand Number Fits Color Case Weight CubeCMC 1702BE #25 & #32 Beige 4 17.76 lbs. 3.040

CMC 1702BN #25 & #32 Brown 4 17.76 lbs. 3.040

CMC 1702GY #25 & #32 Grey 4 17.76 lbs. 3.040

TIP TOP LID

Gravity, hands-free opening encourages use and automatically closes to hide trash. No metalparts to rust or break.

Item Pack Case CaseBrand Number Fits Color Case Weight CubeCMC T1700BE #25 & #32 Beige 4 11.80 lbs. 2.240

CMC T1700BN #25 & #32 Brown 4 11.80 lbs. 2.240

CMC T1700GY #25 & #32 Grey 4 11.80 lbs. 2.240

CMC T1700WH #25 & #32 White 4 11.80 lbs. 2.240

PhoenixRecycles


Item Pack Case CaseBrand Number Item Color Case Weight CubeCMC 887BE Classic Beige 1 8.40 lbs. 3.130

CMC 887GY Classic Grey 1 8.40 lbs. 3.130

CMC 887BK Classic Black 1 8.40 lbs. 3.130

CMC 889 Cactus Green/Tan 1 9.16 lbs. 3.130

CMC 892 Lighthouse Black/ Red/White 1 9.16 lbs. 3.130

SMOKING RECEPTACLE

These smoking receptacles are geared toward outdoor use. Galvanized inner liner included.

Ash Receptacles & Sand Urns

99

090_105 9/18/10 8:36 AM Page 103

537

537

100

FLOOR SAND URN

These rugged sand urns are manufactured of structural plastic and include a chrome platedashtray top. Sand Urns are made to color coordinate with the Roun’Top™ receptacle line.

Item Pack Case CaseBrand Number Size Color Case Weight CubeCMC 888BK 20" x 10" dia. Black 1 7.31 lbs. 1.280

CMC 888BN 20" x 10" dia. Brown 1 7.31 lbs. 1.280

L’ASHCAN TRASH RECEPTACLE & ASHTRAY

Combination sand urn and waste receptacle. This unit is made of structural plastic and includesa galvanized metal liner. Provides an added measure of fire safety when placed together with

Roun’Top™, Funnel’Tops and Flat’Tops.

Item Pack Case CaseBrand Number Size Color Case Weight CubeCMC 885BK 2313/16" x 10" dia. Black 1 12.50 lbs. 2.130

COLOSSUS® ASH TRAY TOP

The Ash Tray Top easily attaches to any Colossus® Receptacle without the aid of power tools.Includes four self-tapping screws and a replaceable, chrome-plated ash tray insert.

Item Pack Case CaseBrand Number Size Color Case Weight CubeCMC 6458 131/2" x 131/4" x 25/8" Black 1 1.50 lbs. 0.340

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC 2907SD 7 qt. Sand 6 13.56 lbs. 0.780

CMC 2914BK 14 qt. Black 6 24.48 lbs. 1.320

CMC 2914SD 14 qt. Sand 6 24.48 lbs. 1.320

CMC 2927BK 275/8 qt. Black 6 40.32 lbs. 2.730

CMC 2927BN 275/8 qt. Brown 6 40.32 lbs. 2.730

CMC 2927SD 275/8 qt. Sand 6 40.32 lbs. 2.730

A complete line of Colossus ® Receptaclescan be found on page 94.

888BN

885BK

UL Classified Wastebaskets

UL CLASSIFIED RECTANGULAR WASTEBASKET

Required baskets for healthcare and preferred elsewhere for the extra measure of fire safety.Non-metallic wastepaper container, classified by Underwriters Laboratories, Inc., only as to

contain burning paper without melting or contributing fuel to the container contents.

Item Pack Case CaseBrand Number Size Color Case Weight CubeCMC 132 313/16" x 25/16" x 4" Chrome 12 11.04 lbs. 0.840

CMC 650 813/16" x 71/2" x 99/16" Chrome 6 27.72 lbs. 3.720

ASH RECEPTACLE

These satin chrome ash receptacles mount to the wall. Push button drops debris into liner.Liner included.

090_105 9/18/10 8:36 AM Page 104

538

538

R EC E P TAC L E S

101

Steeline™ Wastebaskets

Commercial Plastic Wastebaskets

Tilt-N-Wheel™

STEELINE™ WASTEBASKET

Steeline™ Wastebaskets are built for strength and beauty, exceeding industry standards fordurability and performance. Fire safe steel adds an additional dimension of safety for protectionagainst fire escalating or spreading. The rolled wire rim, double lock seams, embossed sidepanels and heavier gauge metal provide extra strength and superior dent resistance. The poly-ester powder coating process prevents scratches, chipping and rust. With the recessed bottomand metal construction, these containers will not burn or transfer heat to the floor.

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC 71NBK 21 qt. Black 6 22.00 lbs. 2.380

CMC 71NBN 21 qt. Brown 6 22.00 lbs. 2.380

CMC 71NGY 21 qt. Grey 6 22.00 lbs. 2.380

CMC 72NBE 49 qt. Beige 3 20.00 lbs. 4.010

CMC 72NGY 49 qt. Grey 3 20.00 lbs. 4.010

CMC 75BE 80 qt. Beige 3 28.00 lbs. 5.330

CMC 75GY 80 qt. Grey 3 28.00 lbs. 5.330

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC 5850BK 50 gal. Black 2 56.00 lbs. 18.540

CMC 5850YW 50 gal. Yellow 2 56.00 lbs. 18.540

COMMERCIAL PLASTIC WASTEBASKET

The low profile and sleek, attractive design of these wastebaskets make them the right choicefor a variety of applications ranging from classroom, office, commercial or institutional use.

TILT-N-WHEEL™

These 50 gallon containers have a hinged double walled lid with standard 8" non-marking wheels.

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC 1358BE 135/8 qt. - Rectangular Beige 12 15.00 lbs. 1.680

CMC 1358BK 135/8 qt. - Rectangular Black 12 15.00 lbs. 1.680

CMC 1358BN 135/8 qt. - Rectangular Brown 12 15.00 lbs. 1.680

CMC 1358GY 135/8 qt. - Rectangular Grey 12 15.00 lbs. 1.680

CMC 1358GN 135/8 qt. - Rectangular Green 12 15.00 lbs. 1.680

CMC 2818BE 28 1/8 qt. - Rectangular Beige 12 27.00 lbs. 2.880

CMC 2818BK 28 1/8 qt. - Rectangular Black 12 27.00 lbs. 2.880

CMC 2818BN 28 1/8 qt. - Rectangular Brown 12 27.00 lbs. 2.880

CMC 2818GY 28 1/8 qt. - Rectangular Grey 12 27.00 lbs. 2.880

CMC 2818GN 28 1/8 qt. - Rectangular Green 12 27.00 lbs. 2.880

CMC 4114BE 411/4 qt. - Rectangular Beige 12 35.16 lbs. 3.480

CMC 4114BK 411/4 qt. - Rectangular Black 12 35.16 lbs. 3.480

CMC 4114BN 411/4 qt. - Rectangular Brown 12 35.16 lbs. 3.480

CMC 4114GY 411/4 qt. - Rectangular Grey 12 35.16 lbs. 3.480

CMC 4114GN 411/4 qt. - Rectangular Green 12 35.16 lbs. 3.480

CMC 4438BE 43 3/8 qt. - Round Beige 6 15.00 lbs. 3.900

CMC 4438GY 43 3/8 qt. - Round Grey 6 15.00 lbs. 3.900

PhoenixRecycles


PhoenixRecycles

Some sizes available in a Recyclemodel, see page 104 for details.

090_105 9/18/10 8:36 AM Page 105

539

539

102

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC 2000-1 20 gal. Blue 6 38.76 lbs. 10.920

CMC 3200-1 32 gal. Blue 6 57.60 lbs. 16.690

Recycling

HUSKEE™ ROUND

Molded of engineered resins with seamless construction, the Huskee™ is a strong, long lastingreceptacle ideal for recycling applications. Optional Recycle Lid has center hole and permanent

“Cans Only” imprint to encourage use.

HUSKEE™ SQUARE

Molded of engineered resins with seamless construction, the Huskee™ is a strong, long lastingreceptacle ideal for recycling applications. Available in two size options; 48 gallon with handles

and 55 gallon without handles. 55 gallon receptacle accepts the 5556-1 lid.

CORNER’ROUND™ RECYCLING STATION

Combine the new Recycle’Round™ Dolly and color-coded Corner’Round™ Receptacles tocreate a unique recycling collection system that promotes a comprehensive recycling program.

Products are sold separately, allowing the creation of customized recycling programs for anyapplication! Recycle’Round Station is ideal for open settings like school cafeterias, atriums,

foyers, food courts, airport terminals, plazas, convention centers, etc.

CMC 3201-1 fits 3200-1 White 6 13.80 lbs. 3.420

HUSKEE™ LIDBuilt-in Huskee™ Bag Cinch eliminates the need totie knots in the polyliner to keep it secure aroundthe receptacle rim!

5556-1 Dome Lid accepts bottlesor cans - fits 5555-1


CMC 5555-1 55 gal. Blue 4 73.56 lbs. 25.640

CMC 5556-1 fits 5555-1 Blue 1 13.30 lbs. 5.900

DOME LID WITH HOLES


CMC 8325-2 21 gal. Green 1 14.00 lbs. 4.810

CMC 8325-3 21 gal. Yellow 1 14.00 lbs. 4.810

CMC 8325-4 21 gal. Grey 1 14.00 lbs. 4.810

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC 8325-D Black 1 21.30 lbs. 5.160

RECYCLE’ROUND™ DOLLY

This black, powder-coated steel Dolly has four 3", non-marking, all swivel casters. It turnsCorner’Round Receptacles into a mobile waste collection system. Sturdy handle makes

moving the unit from place to place a breeze.

4000-1

Trilingual (Eng/Sp/Fr) “RecycleMaterial ID Labels” are also includedto make sorting easy!

Corner'Round™ Recycle Receptacles comewith a unique ‘Key-Way’ feature and

shoulder design that allows a poly liner to besecured and helps to hide the unsightly bag

“skirt” to maintain a clean, professionalappearance.

090_105 9/18/10 8:36 AM Page 106

540

540

R EC E P TAC L E S

103

645-1 bases shown with all lid options.

COLOSSUS® RECYCLING STATION

These high capacity recycle stations utilize color-coded, hinged recycle lids to promote andencourage users to sort their recyclables! Trilingual Material ID Labels (included) make sortingrecyclables easy and allows the user to customize a program to their facility. Two rigid plasticliners allow for convenient and efficient separation of recyclables for multi-stream collection.Rigid liners are easily removed for emptying and cleaning. Four color-coded lids are included.


CMC 656-1 56 gal. Blue 1 42.00 lbs. 16.529

7317BL


CMC 8320-4 Black 1 18.00 lbs. 3.525

DOLLIES

The Wall Hugger™ line offers both Single and Quad-Collection Dollies. These attractive, blackpowder-coated steel Dollies have 3", non-marking, all swivel casters, enabling them to turn anyCMC Wall Hugger™ or competitive receptacle into a mobile waste or recycle collection system.

8320-4

8320

Item Pack Case CaseBrand Number Item Color Case Weight CubeCMC 8322BK 23 gal. Black 4 27.10 lbs. 6.200

CMC 8322-2 23 gal. Green 4 27.10 lbs. 6.200

CMC 8322-1 23 gal. Blue 4 27.10 lbs. 6.200



CMC H8322-2 23 gal. w/handles Green 4 27.10 lbs. 7.150

CMC H8322-1 23 gal. w/handles Blue 4 27.10 lbs. 7.150


WALL HUGGER™

Built of durable plastic, these newly designed receptacles work efficiently in tight spaces. Theirsleek, attractive design holds either 16 or 23 gallons of recyclables, but protrude less than onefoot from the wall. Molded-in bag cinch eliminates the need to tie knots in poly liners. The basefeatures molded-in hand grips which provide a secure area to grasp when lifting or dumping.Designed with smooth, seamless construction for easy cleaning and prolonged life. The 23gallon size is 30" tall, making it ideal for placement under standard work tables.

Item Pack Case CaseBrand Number Fits Case Weight CubeCMC 8319 #8321, 8322, H8322, 8316 & H8316 4 3.64 lbs. 0.040

WALL HUGGER™ MOUNTING BRACKET

Item Pack Case CaseBrand Number Item Color Case Weight CubeCMC 7315GY Lid w/handles Grey 4 4.00 lbs 1.000

CMC 7315GN Lid w/handles Green 4 4.00 lbs 1.000

CMC 7316GN Lid w/holes Green 4 4.00 lbs 1.000

CMC 7316YW Lid w/holes Yellow 4 4.00 lbs 1.000

CMC 7316BL Lid w/holes Blue 4 4.00 lbs 1.000

CMC 7317BL Lid w/slot Blue 4 4.00 lbs 1.000

RECYCLE LIDS

New style Wall Hugger™ Recycle Lids encourage users to sort their recyclables and arecolor-coded to make the identification easier. Fits all CCP Wall Hugger™ receptacles andcompetitive units.

Wall Hugger™ Recycle Lids comewith trilingual (Eng/Sp/Fr)“Recycle Material ID Labels” tomake sorting easy!

7316YW

7316GN

7315GY

090_105 9/18/10 8:37 AM Page 107

541

541

104

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC 1358-1 135/8 qt. Blue 12 15.00 lbs. 1.680

CMC 1358-2 135/8 qt. Green 12 15.00 lbs. 1.680

CMC 2818-1 281/8 qt. Blue 12 27.00 lbs. 3.240

CMC 2818-2 281/8 qt. Green 12 27.00 lbs. 3.240

CMC 4114-1 411/8 qt. Blue 12 35.16 lbs. 3.480

CMC 4114-2 411/8 qt. Green 12 35.16 lbs. 3.480

COMMERCIAL WASTEBASKET

The low profile design of these rectangular wastebaskets make them ideal for a variety ofrecycle applications ranging from classroom, office, commercial or institutional use.

Item Pack Case CaseBrand Number Description/Fits Color Case Weight CubeCMC 1725-1 Lid w/slot fits 25 & 32 gal. Blue 4 7.50 lbs. 2.915

CMC 1750-1 Lid w/slot fits 50 gal. Blue 2 7.70 lbs. 2.679

CMC 1725-2 Lid w/hole fits 25 & 32 gal. Blue 4 7.50 lbs. 2.915

CMC 1750-2 Lid w/hole fits 50 gal. Blue 2 7.70 lbs. 2.679

SWINGLINE™ RECYCLE LIDS

These lids are specifically designed to accommodate either paper or bottle/can refuse. Bothstyles are available to fit any size Swingline™ Receptacle.


CMC 32-1 32 gal. Blue 4 35.00 lbs. 9.280

CMC 50-1 50 gal. Blue 4 64.00 lbs. 13.770

Item Pack Case CaseBrand Number Fits Color Case Weight CubeCMC T1700WH fits 25 or 32 gal. White 4 11.80 lbs. 2.240

SWINGLINE™

The Continental® Square SwingLine™ containers provide 25% more capacity than roundcontainers of the same height, which equates to labor and poly liner savings. The rolled rimprovides strength as well as a convenient area to lift or pull. Reinforced base will take rough

commercial use and they nest for easy storage. Two 50-1 receptacles fit on a8320-4 Quad-Collection Dolly (seen on page 103).

SWINGLINE™ TIP TOP LID

This lid uses gravity to create a hands-free opening. Automatically closes to conceal trash.Fits 25 and 32 gallon Swingline™ receptacles.

HALF ROUND WALL HUGGER™

The Half Round completes the popular Wall Hugger™ Line. Its smaller footprint and impressive21 gallon capacity is ideal for today’s space-efficient workplace. The rounded front and sidesallow use where other square or rectangular containers would interfere with traffic. The Half

Rounds may be suspended off of the floor with our 8319 Mounting Bracket, found on page 103.


1358-2

090_105 9/18/10 8:37 AM Page 108

542

542

R EC E P TAC L E S

105


CURBSIDE BIN

Used by environmentally conscious cities all across America for curbside recycle collection.This bin is durable and lightweight. Drain holes in base of bin prevent accumulation ofrainwater. Notched sides allow units to be cross-stacked. For convenient indoor recyclecollection, one or two Curbside Bins can be used with the MFT-5BK Trolley (details on page 6) .


TILT-N-WHEEL™

These 50 gallon containers have a hinged double walled lid with standard 8", non-markingwheels.

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC 5840-1 5/8 cu. yd. Blue 1 79.00 lbs. 43.110

TILT TRUCK

Features one-piece, extra strong seamless industrial plastic construction. Inset wheel place-ment prevents wall/door damage and allows for nesting in shipment and in storage. Fitsthrough standard office doorways.

Item Pack Case CaseBrand Number Capacity Color Case Weight CubeCMC 5916-1 16 cu. ft. Blue 1 50.00 lbs. 25.460

CUBE TRUCK

This 16 cubic foot Cube Truck features 3" casters placed in a diamond configuration. Twostationary and two fixed casters allow this unit to be turned on its own axis for greater mobility.Ideal for bulk recycle collection.

S

090_105 9/18/10 8:37 AM Page 109

543

543

544

544

545

545

546

546

547

547

548

548

549

549

550

550

551

551

552

552

553

553

554

554

555

555

556

556

557

557

558

558

559

559

560

560

561

561

562

562

563

563

564

564

565

565

566

566

567

567

568

568

569

569

570

570

571

571

572

572

573

573

574

574

575

575

576

576

577

577

578

578

579

579

580

580

581

581

582

582

583

583

584

584

585

585

586

586

587

587

588

588

589

589

590

590

591

591

592

592

593

593

594

594

595

595

596

596

597

597

598

598

599

599

600

600

601

601

602

602

603

603

604

604

605

605

606

606

607

607

608

608

609

609

Tread-Grid Cushion-Grid

75 North Pleasant Street • Norwalk, OH 44857800-537-1603 • Local 419-668-8138

Fax: 800-537-6287 • Local Fax 419-668-8068www.durablecorp.com • [email protected]

Vinyl duckboard matting with high grid surface for su-per grip and sure footing. Resilient cushion construction eases worker fatigue and reduces damage from dropped parts and equipment. Maintians fl exibility in tempera-tures from -40°F to 212°F.

Material: All vinyl constructionThickness: 1/

2”

Surface: Tread OpenColors: Red, Blue, Black

Item #

525R0024525R0036525R0048

Cushion-Grid - Rolls

Weight

74 lbs. ea.110 lbs. ea.148 lbs. ea.

Size

2’ x 40’3’ x 40’4’ x 40’

Cushion-Grid Cut Lengths (up to 40’)

Item #

525C0024525C0036525C0048

Weight

0.9 lb./s.f.0.9 lb./s.f.0.9 lb./s.f.

Size

2’ wide3’ wide4’ wide

Tread-Grid Cut Lengths (up to 40’)

Item #

535C0024535C0036535C0048

Weight

1.2 lb./s.f.1.2 lb./s.f.1.2 lb./s.f.

Size

2’ wide3’ wide4’ wide

Item #

535R0024535R0036535R0048

Tread-Grid - Rolls

Weight

93 lbs. ea.140 lbs. ea.186 lbs. ea.

Size

2’ x 40’3’ x 40’4’ x 40’

Hollow tube construction with tread surface provides air-cushioned comfort. Ideal for use on wet fl oors. Compound resists oil, grease, fats, alkalis and acids.

Material: All vinyl constructionThickness: 1/

2”

Surface: Smooth OpenColors: Red, Blue, Black



Industrial MatsFlip-Over

DCDDUpdated January 10

Anti-Fatigue, low maintenance runner mat with raised knobs and round perforations for excellent drainage. Top and bottom surface design allows mat to be “fl ipped” over and either surface utilized. Built-in tread helps reduce slippage. Red mat is grease and oil resistant.

Material: Heavy duty rubberThickness: 3/8”Surface: Open-raised konbsWarranty: Standard

Item No.772R0036

Weight 162 lbs. ea.

Size3’ x 36’

Colors may vary from those shown. Please call for samples.

Colors

Red Black

Full Rolls

Item No.772C0036

Weight 1.5 lbs./sq.ft.

Size3’ x up to 36’

Special Cuts



Anti-Fatigue MatsSan-Eze & San-Eze II

DCDDUpdated November 09

Material: San-Eze (Black): High grade grease-resistant rubber compoundSan-Eze II (Brick Red): High grade grease-proof rubber compoundThickness: 7/8”Surface: Open circularWarranty: 2 year replacement guarantee, NSF approved. San-Eze II is 100% grease proof.Options: Beveled nosing Attachable ramp corner Mat connector

Colors:

Matting with cushion surface combines comfort, safety and cleanliness. Gripping edges on round holes offer maximum traction and effi cient shoe cleaning action. Cushioned surface reduces break-age of dropped articles while pebble backing allows for air circulation. Ideal for use in restaurants, food processing areas and in-plant use. Just hose down to clean.

Note: Grease-resistant San-Eze (Black) matting will show deterioration in areas where oil and grease are common. Grease-proof San-Eze II (Brick Red) is recommended in these applications.

Standard SizesItem No.425S5839425S3939425S2939425S1939

Size58.5” x 39”39” x 39”

29.5” x 39”19.5” x 39”

Weight 38 lbs. ea.19 lbs. ea.25 lbs. ea.

12.5 lbs. ea.

DescriptionFull

SquareMedium

Small

Item No.425B0029425B0000

Size29’ x 1.75’Up to 29’

Weight 14 lbs. ea.

0.5 lbs./lin.ft.

DescriptionRoll

Custom Cut

Optional Beveled Nosing

Item No.425R0000425M0000

Weight 1 lb. ea.0.2 lb.ea.

DescriptionAttachable Ramp Corner

Mat Connector

Other Options

Grease-Resistant Black

Grease-Proof Red

Durable Corporation WorkstationWorkstation Solid



Material: Black: Grease-resistant rubber compound Red: Grease-proof rubber compoundThickness: 5/8”Surface: Workstation: Open circular Workstation Plus: Textured Solid

Thick mat is perfect for most industrial applications. Available in solid or oepn mesh design. Mat has built-in interlocking system that can be connected to extend length and width. Beveled edges available.

Ordering InformationItem No.430S3636430S3636430RM0036BK430RF0036BK430RM0048BK430RF0048BK430RM0060BK430RF0060BK

Size36” x 36”36” x 36”

Weight lbs./ea.20202.52.52.72.744

DescriptionSolid Open

36” Bevel Male36” Bevel Female40” Bevel Male

40” Bevel Female60” Bevel Male

60” Bevel Female

The Most Advanced Window Squeegee Ever Built!

The Most Advanced Window Squeegee Ever Built! TriLoc channeL

Locking

MechanisM

ergonoMic

swiveL handLe

sMarTcLip - revoLuTionary

end cLip design

180º

Tool ConnectionsPress OnThese tools press on the Unger cone, making hard-to-reach areas easy to clean. The special grooves on the cone ensure a secure fit for the tools.

Snap OnThese tools snap directly onto Unger telescopic poles.

Screw OnThese tools screw onto the ACME thread of an Unger cone.

Lock OnAny tool with a hole in the handle and “LOCK” inscribed on it locks onto the ErgoTec® Locking Cone. This prevents the tool from twisting or pulling off the pole during work. The ErgoTec® Locking Cone is a standard feature on all OptiLocTM and TelePlusTM poles.

ErgoTec® Ninja Aluminum Channels Complete with soft rubber and SmartClip end clips.Part No. Length Case Qty. Price Ea. AC200 8“ / 20 cm 5 $10.30 AC250 10“ / 25 cm 5 $11.40 AC300 12“ / 30 cm 5 $12.60 AC350 14“ / 35 cm 5 $13.58 AC400 16“ / 40 cm 5 $14.90 AC450 18“ / 45 cm 5 $16.31 AC500 20“ / 50 cm 5 $18.32 AC550 22“ / 55 cm 5 $19.37 AC600 24“ / 60 cm 5 $20.71 AC650 26“ / 65 cm 5 $22.84 AC750 30“ / 75 cm 5 $25.47 AC920 36“ / 92 cm 5 $29.70AC105 42“/105 cm 5 $34.90

ErgoTec® Ninja Handle Two-component handle, perfect for pole work.

ErgoTec® Ninja BucketOnABelt New design now fits the ErgoTec® Ninja Window Squeegee.

ErgoTec® Ninja Window Squeegee CompleteThe most advanced window squeegee ever built.

Part No. Length Case Qty. Price Ea. EN300 12“/30 cm 5 $35.51EN350 14“/35 cm 5 $36.44EN450 18“/45 cm 5 $39.03

•Swivel and TriLock safety function.•Extruded Aircraft Aluminum T6 Channel is

lightweight and will not bend.•Streak-free window cleaning featuring

two sharp edges.

Part No. Case Qty. Price Ea. BB010 5 $36.90

•Clip lock for quick fastening.•Holds all important tools at your side.•Reduces need to climb up and down ladders.•Sturdy, quick-release strap for easy removal from belt.

Part No. Case Qty. Price Ea. EN000 5 $24.78

•TriLoc for secure channel hold.•Locks on TelePoles with Unger Locking Cone.

SmartClips Left and Right SmartClip in One Set

Replacement end clips with adjustable rubber tension. Easily changeable and protects the window frame.

Part No. Contents Case Qty. Price Ea. PPLUG End Clip Set 5 Sets $9.25 (Left & Right)

www.ungerglobal.com

Window Cleaning

1

ErgoTec® T-BarErgonomic T-bar with polypropylene handle.

Part No. Size Case Qty. Price Ea. EH250 10”/25 cm 10 $9.37EH350 14”/35 cm 10 $10.31EH450 18”/45 cm 10 $11.19

•Two-component handle provides less strain and more control.

•Water wells offer increased water retention.

Micro StripWasher® SleeveMicrofiber washer sleeve with scrub pad and hook and loop fastening. •Superior cleaning power.•Can absorb up to 6 times its weight. •Scrub pad provides extra cleaning power.•Withstands frequent (up to 500) washings.

SwivelStrip T-barLightweight aluminum T-bar with adjustable head.•Angle adjusts to 7 different positions.•May be used with all Unger washer sleeves and

telescopic poles.

The Original StripWasher® SleeveStandard washer sleeve made with plush, woven synthetic fabric with hook and loop fastening. •Gentle but strong. Reinforced zigzag stitched ends

ensure long life.•Excellent for cleaning windows, screens and dusting.

ThePad StripWasher® SleeveStandard washer sleeve with plush, woven synthetic fabric on front and textured pad strip on back with hook and loop fastening. •Plush, woven synthetic fabric with reinforced zigzag

stitching for extended life.•Rough-textured, non-abrasive nylon cleaning pad

removes tough dirt.

Klett Stripwasher®

Holds a microfiber cloth for drying and polishing jobs. •Plush, woven synthetic fabric with hook and loop pad

for holding microfiber cloth.•Pairs with MicroWipe® cloths for drying and polishing.

Micro StripWasher® The extremely fine microfibers provide maximum scrubbing power. The fibers retain up to six times their own weight in water. Can withstand over 500 washings.

ErgoTec® T-BarFeaturing solid one-piece plastic construction with patented water wells for improved water delivery.

Security LocksLocks onto ErgoTec® Locking Cone.

Hook & Loop Fastener

Scrub Pad

Part No. Size Case Qty. Price Ea. SV350 14“/35 cm 5 $17.04SV450 18”/45 cm 5 $18.52

Part No. Size Case Qty. Price Ea. NS250 10”/25 cm 10 $16.16NS350 14”/35 cm 10 $18.91NS450 18”/45 cm 10 $21.42NS550 22”/55 cm 10 $25.05

Monsoon Plus StripWasher® SleeveHeavy-duty washer sleeve with extra-long fibers, scrub pad, and hook and loop fastening.•Woven fabric holds large amounts of water. Rein-

forced sewn ends & durable backing for extended life.•Ideal for cleaning large windows/areas.

Part No. Size Case Qty. Price Ea. MS250 10”/25 cm 10 $15.37MS350 14”/35 cm 10 $18.04MS450 18”/45 cm 10 $20.37MS550 22”/55 cm 10 $23.87

Part No. Size Case Qty. Price Ea. WS250 10”/25 cm 10 $10.57WS350 14”/35 cm 10 $13.17WS450 18”/45 cm 10 $15.24WS550 22”/55 cm 10 $17.54

Part No. Size Case Qty. Price Ea. RS350 14”/35 cm 10 $16.90RS450 18”/45 cm 10 $19.50

Part No. Size Case Qty. Price Ea. KS350 14“/35 cm 5 $16.09

www.ungerglobal.com

Window Cleaning

Washers, T-Bars & Sleeves

2

Micro StripWasher® Strip PacMicrofiber washer sleeve with scrub pad and hook and loop fastening. Strip washer handle included.

Part No. Size Case Qty. Price Ea. NC350 14”/35 cm 10 $26.21NC450 18”/45 cm 10 $29.64

•Absorbs up to 6 times its weight. Scrub pad provides extra cleaning power.

•Withstands frequent (up to 500) washings.•Lightweight plastic with patented water wells for high

water retention, reducing number of bucket dips.

MonsoonPlus StripWasher® Strip PacHeavy-duty washer sleeve with extra- long fibers, scrub pad and hook and loop fastening. Strip washer handle included.

Part No. Size Case Qty. Price Ea. MC350 14”/35 cm 10 $24.94MC450 18”/45 cm 10 $28.21

•Woven fabric holds large amounts of water. Reinforced sewn ends & durable backing for extended life.

•Ideal for cleaning large windows/areas.

The Original StripWasher® Strip PacStandard washer sleeve features plush, woven synthetic fabric with hook and loop fastening. Strip washer handle included.

Part No. Size Case Qty. Price Ea. WC250 10”/25 cm 10 $17.73WC350 14”/35 cm 10 $21.25WC450 18”/45 cm 10 $23.09

•Gentle but strong. Reinforced zigzag stitched ends ensure long life.

•Excellent for cleaning windows, screens and dusting.

ThePad StripWasher® Strip PacStandard washer sleeve features plush, woven synthetic fabric on front and textured pad strip on back with hook and loop fastening. Strip washer handle included.

Part No. Size Case Qty. Price Ea. RC350 14”/35 cm 10 $24.50RC450 18”/45 cm 10 $27.75

•Plush, woven synthetic fabric with reinforced zigzag stitching for extended life.

•Rough-textured, non-abrasive nylon cleaning pad removes tough dirt.

ErgoTec® SwivelLoc Handle OnlyHandle comes in two models, both with swivel action and ergonomic grip.

Part No. Size Case Qty. Price Ea. LS000 Straight 0o 5 $21.23LA000 30o 5 $21.23

•0o for cleaning low windows. 30o head angle for working above ledges.

•0o – brass or stainless steel “S” Channel, 30o – “S” Channel only.

•Locks onto ErgoTec® Locking Cone.

ErgoTec® SqueegeeErgonomic, two-component handle. Complete with “S” Channel and ErgoTec soft rubber. Part No. Size Case Qty. Price Ea. ES150 6”/15 cm 10 $18.85ES250 10”/25 cm 10 $19.94ES300 12”/30 cm 10 $20.71ES350 14“/35 cm 10 $21.51ES400 16”/40 cm 10 $22.91ES450 18”/45 cm 10 $23.25ES550 22”/55 cm 10 $24.66

ErgoTec® XL Handle OnlyExtra long, two-component ergonomically designed handle.

Part No. Size Case Qty. Price Ea. ETX00 Handle 10 $15.24

•Handle is almost a full inch longer for large hands.•Quick-release “S” spring for fast rubber change.•Locks onto ErgoTec® Locking Cone.

Pro StainlessSteelSqueegee CompleteStainless steel squeegee with ergonomic rubber grip. Complete with “S” Channel and ErgoTec soft rubber.

Part No. Size Case Qty. Price Ea. PR250 10”/25 cm 10 $18.43PR300 12”/30 cm 10 $19.28PR350 14”/35 cm 10 $19.92PR400 16”/40 cm 10 $21.21PR450 18”/45 cm 10 $21.58

“S” ChannelStainless steel “S” Channel complete with ErgoTec soft replacement rubber.

Part No. Size Case Qty. Price Ea. NE150 6”/15 cm 10 $6.05NE250 10”/25 cm 10 $7.68NE300 12”/30 cm 10 $8.32NE350 14”/35 cm 10 $9.15NE400 16”/40 cm 10 $9.48NE450 18”/45 cm 10 $10.09NE550 22”/55 cm 10 $11.75

PlasticClips and CaseIncreases strength of rubber edge.

Part No. Size Case Qty. Price Ea. PCLIP 40 Clips per 10 Dispensers $3.95 dispenser per case

•Clips easily separate from dispenser.•Solid plastic clip fits between channel

and squeegee rubber.•Increases stability, offering sharper end strokes.

Part No. Size Case Qty. Price Ea. ETG00 Handle 10 $13.83

ErgoTec® Squeegee Handle Part No. Size Case Qty. Price Ea. PR000 Handle 10 $11.92

Pro-Squeegee Handle

•Fits on ErgoTec, Pro StainlessSteel and GoldenPRO handles.

www.ungerglobal.com 3

Window CleaningStrip Pacs, Squeegees & Accessories

• Non-slip rubber grip ideal for all weather conditions.

• Quick-release “S” spring for fast rubber change.

• Locks onto ErgoTec Locking Cone. Will not fall off pole.

• Non-slip rubber grip ideal for all weather conditions.

• Features a fast lock for quick channel changes.

• Fits onto all Unger poles.


Window CleaningSqueegees & Accessories

GoldenClip® BrassSqueegee CompleteClassic brass squeegee with screw lock.

Part No. Size Case Qty. Price Ea. GS250 10”/25 cm 10 $16.47GS300 12”/30 cm 10 $17.14GS350 14”/35 cm 10 $18.43GS400 16”/40 cm 10 $19.13GS450 18”/45 cm 10 $19.94

•Complete with handle, channel, ErgoTec soft rubber and plastic end clips.

•Fits onto all Unger poles.

GoldenClip® BrassSqueegee Handle OnlyClassic brass squeegee handle.

Part No. Size Case Qty. Price Ea. GS000 Handle 10 $8.73

•Solid brass construction.•Screw lock firmly holds channel and rubber.•Fits onto all Unger poles.

VisaVersa®

Squeegee and washer in one. Complete with “S” Channel, Original StripWasher sleeve and ErgoTec soft rubber.

Part No. Size Case Qty. Price Ea. VP250 10”/25 cm 10 $39.16VP350 14”/35 cm 10 $43.94VP450 18”/45 cm 10 $48.00

•Two tools in one allow for faster cleaning.•Comes pre-assembled. Channel and blade are

easy to change with quick-release spring.

UnitecLiteSqueegeeThe ultra-light plastic squeegee for glass or flat surfaces in household area.

Part No. Size Case Qty. Price Ea. US300 12”/30 cm 10 $7.18

•Lightweight and comfortable to hold.•For glass or smooth surfaces.•Fits on telescopic pole.

BrassChannel for GoldenClip® and GoldenPROSturdy brass channel complete with ErgoTec soft rubber. Includes plastic end clips.

Part No. Size Case Qty. Price Ea. GC150 6”/15 cm 10 $5.94GC250 10”/25 cm 10 $7.93GC300 12”/30 cm 10 $8.73GC350 14”/35 cm 10 $9.94GC400 16”/40 cm 10 $10.55GC450 18”/45 cm 10 $11.40GC550 22”/55 cm 10 $13.17

GoldenPRO BrassSqueegee Handle OnlyDurable brass handle with fast lock and ergonomic grip.

Part No. Size Case Qty. Price Ea. GP000 Handle 10 $13.17

•Non-slip rubber grip ideal for all weather conditions.•Features a fast lock for quick channel changes.•Fits onto all Unger poles.

Ergo Tile SqueegeeDries and cleans tiles and grout lines as well as uneven surfaces. 14” dual blade is soft white moss rubber.

AutoSqueegeeSqueegee and scrubber in one.

Part No. Size Case Qty. Price Ea. AUSQ0 8”/20 cm 20 $9.98

•Heavy-duty mesh scrubber for the hard-to-remove buildup on windows.

•24” plastic handle for extended reach.

•No streaks on light tiles.•Ergonomic handle for comfort.•Attaches to all Unger poles.

Part No. Size Case Qty. Price Ea. EW35G 14”/35 cm 10 $18.75

ErgoTec® Soft Rubber 12 packs

Part No. Size Case Qty. Price Ea. RT150 6”/15 cm 12 $1.70RT200 8”/20 cm 12 $1.96RT250 10”/25 cm 12 $2.52RT300 12”/30 cm 12 $2.78RT350 14”/35 cm 12 $3.25RT400 16”/40 cm 12 $3.27RT450 18”/45 cm 12 $3.47RT500 20”/50 cm 12 $4.15RT550 22”/55 cm 12 $4.48RT600 24”/60 cm 12 $4.96RT750 30”/75 cm 12 $6.29RT920 36”/90 cm 12 $6.88RT990 42”/105 cm 12 $7.66

•Sizes 6“ – 22” available in reclosable blister pack. •Sizes 24“ – 42” in sturdy storage box.

PromoPack ErgoTec® Soft Rubber

Part No. Size Case Qty. Price Ea. RP300 12“/30 cm 25 $2.78RP450 18”/45 cm 25 $3.47

•Storage box for 25 soft rubber blades.

HardReplacementRubberPart No. Size Case Qty. Price Ea. RT92H 36”/90 cm 12 $6.88RT99H 42”/105 cm 12 $7.66RG25H 10”/25 cm 144 $2.52RG35H 14”/35 cm 144 $3.25RG40H 16”/40 cm 144 $3.27RG45H 18”/45 cm 144 $3.47RG55H 22”/55 cm 144 $4.48RG92H 36”/90 cm 144 $6.88

ErgoTec® Soft Rubber Gross Packs

Part No. Size Case Qty. Price Ea. RG250 10”/25 cm 144 $2.52RG300 12”/30 cm 144 $2.78RG350 14”/35 cm 144 $3.25RG400 16”/40 cm 144 $3.27RG450 18”/45 cm 144 $3.47RG500 20”/50 cm 144 $4.15RG550 22”/55 cm 144 $4.48RG600 24”/60 cm 144 $4.94RG750 30”/75 cm 144 $6.27RG920 36”/90 cm 144 $6.88

• Ideal for colder temperatures.• Conforms to uneven surfaces.• Better glide with streak-free performance.• Sturdy storage box is shrinkwrapped

for protection.

• Ideal for warmer temperatures.• Optimum liquid removal on large,

flat surfaces.• Coated with talcum to ensure freshness.


Window CleaningGlass Scrapers & Blades

ErgoTec® Glass ScraperComplete with lightweight ergonomic handle, protective cap and reversible carbon steel blade. Use with replacement blades: TR100, TR150.

Part No. Size Case Qty. Price Ea. EG100 4”/10 cm 10 $13.45EG150 6”/15 cm 10 $16.88

•Reversible blade has 2 razor edges ideal for cleaning large surfaces and scraping off paint, stickers, etc.

•Simple blade change. Protective blade cap safely stores blade. Fits on ErgoTec® Locking Cone.

ProTrim 10 Patent PendingCompact scraper for everyday use. Use with replacement blades: TR100.

Part No. Size Case Qty. Price Ea. TX100 4”/10 cm 10 $9.39

•Easy to handle and stores in pocket. •Has an integrated safety guard for blade protection.•Scraper opens with a push of a button for quick blade

replacement and cleaning.

4” Trim10 ScraperGlass scraper in stainless steel holder. Comes in practical plastic box with 10 carbon steel blades. Use with replacement blades TR100.

Part No. Size Case Qty. Price Ea. TM100 4”/10 cm 10 $8.87

•Double-edged carbon steel blade. Strong stainless steel blade holder.

•Fits ErgoTec, Pro and GoldenPRO squeegees for window cleaning with telescopic poles.

•Easily folds for safe storage.

Trim/Glass Scraper Replacement BladesRust-resistant, coated carbon steel blades with a reversible razor edge. For TX100, TM100, EG100/150.

Part No. Size Case Qty. Price Ea. TR100 4”/10 cm 10 $12.78TR150 6”/15 cm 10 $18.74

•10 dispensers of 25 blades.•Handy dispenser protects blades.

SafetyScraper & ErgoTec® SafetyScraperUnique locking system eliminates blades from sliding out while working.

Part No. Size Case Qty. Price Ea. SR040 1-1/2”/4 cm 50 $3.51SR500 1-1/2”/4 cm 50 $2.97

•Rubber grip on SR040 prevents scraper from slipping in hand. SR500 made with stainless steel.

•Uses standard No. 9 (1-1/2“) razor blades (not included).

1-1/2” MiniScraper1-1/2” scraper comes packaged in a storage bucket, perfect for countertops. Use with replacement blades: SRB10, SRB30, SRB40.

Part No. Size Case Qty. Price Ea. STMIN 1-1/2”/4 cm 100 $1.66

•Extremely small – take it anywhere.•Easily snaps open for quick blade replacement.•Uses standard No. 9 (1-1/2”) razor blades

(not included).

SafetyScraper Replacement BladesRazor sharp No. 9 (1-1/2“) standard blade for SR040, SR500, STMIN.

Part No. Size Case Qty. Price Ea. SRB10 1-1/2”/4 cm 1 $22.49SRB30 1-1/2”/4 cm 10 $19.66SRB40 1-1/2”/4 cm 50 $17.26

•Packed in a convenient re-closable plastic tray so blades are kept safe and dry to prevent rusting.

•SRB10: 1 tray of 100 blades. SRB30: 10 trays of 100 blades. SRB40: 50 trays of 100 blades.

Blade Dispenser Display BoxCompact display box for general merchandising areas. Contains 48 individually packaged dispensers. Each dispenser contains 10 blades.

Part No. Size Case Qty. Price Ea. SRBDB 1-1/2”/4 cm 48 $4.60

•Each individual compact dispenser safely stores new and used blades.

•Razor sharp No. 9 (1-1/2”) standard blade for removing dirt.

• Check if glass is scratch-resistant and suitable for scraper use. Unsuitable glass surfaces include: plexiglass, crown glass, solar glass and safety glass (ESG).

• Always follow the manufacturer’s instructions.• Perform a scrape test in advance on a small section.• Before starting, check the glass for any damage and report it, if necessary.• Check the blade for damage and change it or reverse it.• The surface to be scraped should always be wet.• It is best to use a releasing agent, such as “EasyGlideGlassCleaner.”• Scrape in one direction. Never pull the scraper back as this

may cause scratches.

Expert Tips – How Professionals Scrape• Made of extra-sharp carbon or stainless steel.• Both sides are lacquered for longer rust protection.• Safely packed and stored in convenient plastic

dispenser. Blades stay dry and are always available in safe dispenser.

• ATTENTiON: Unger blades are razor sharp. Always handle with greatest care. Use caution when changing blade.

Blade Info

SR040

SR500


Window CleaningSurface Scrapers & Blades

ErgoTec® ScraperComfortable ergonomic scraper with non-slip bi-component rubber grip.

Part No. Size Case Qty. Price Ea. SH00C 4”/10 cm 10 $17.93

•Reversible carbon steel blade with razor edge for scraping paint and tape, and blunt edge for cement or stucco.

•Locks onto ErgoTec® Locking Cone for safety when using telescopic poles.

TheBruteScraperRugged surface scraper with comfortable grip and reversible blade.

Part No. Size Case Qty. Price Ea. SH25C 4”/10 cm 10 $21.60

•Strong 12” handle for extra cleaning power.•Reversible carbon steel blade with razor edge for

scraping paint and tape, and blunt edge for cement and stucco.

•Comes with protective cap for blade.

Maxi ScraperLightweight, ergonomic surface scraper offers simple blade change.

Part No. Size Case Qty. Price Ea. STMAX 4”/10 cm 10 $6.44

•Ergonomic design with rubber-coated handle.•Easy blade change. Protection cap ensures safety.•Features a reversible razor-/blunt-edge blade.

4” ReplacementBlades Stainless Steel

Part No. Size Case Qty. Price Ea. RB100 4”/10 cm 10 $10.53

•Compact handy dispenser safely stores new and used blades. For GS100, STMAX, LH12C, SH00C, and SH25C. 10 dispensers of 10 blades.

•Blades easily slide in and out of dispenser.•Long lasting, rust-free stainless steel.

Grill ScraperNew long handled grill scraper perfect for removing food and grease residue.

Part No. Size Case Qty. Price Ea. GS100 4”/10 cm 10 $21.60

•Reversible stainless steel blade with razor edge easily removes burned residue. Blunt side is for removing food and grease buildup.

•Long-lasting, rust free. Heavy-duty 4” zinc scraper head for extra strength.

4” ReplacementBlades Carbon Steel •Compact handy dispenser safely stores new

and used blades. For STMAX, LH12C, SH00C, SH25C.•10 dispensers of 10 blades.

RB30C: 30 dispensers of 10 blades.

Part No. Size Case Qty. Price Ea. RB10C 4”/10 cm 10 $9.54RB30C 4”/10 cm 30 $9.11

ErgoTec® Belt System•Keep all your tools by your side!

•No more time-consuming searches, no need to stop working in order to find tools! Fastens and unfastens with quick-release.

•Belt does not shift when using shoulder strap. The belt system for all cleaning professionals!

ErgoTec® Belt System - Individual Pieces

BSTBTErgoTec® BeltSturdy padded belt for carrying tool pouches. Four clips, quick-release closure.

BSSTPErgoTec® StrapsAdds support to the belt to help distribute additional weight. Padded straps with solid spring hooks that connect to belt clips.

BSPOU ErgoTec® PouchWith 3 waterproof compart-ments for storing dry and damp cloths separately. Front pocket features tool loop and hook and loop closure.

BSPBG ErgoTec® Scraper HolderFeatures 3 compartments to hold Unger scrapers. Nylon and leather protect pouch from blades.

BSSCH ErgoTec® Personal BagIntended for personal items, like notepads and cell phones. Includes a pen holder, loop and hook for keys and much more.

BSBTH ErgoTec® Bottle HolderPerfect for carrying either cleaning agents or beverages.

BSDHR ErgoTec® Double HolsterMade with strong black leather. Features 2 compartments for squeegees or other tools. Attaches to belt using metal snaps.

ErgoTec® Belt System Master Kit Tools are always within reach. Includes: BSTBT, BSSCH, BSPBG, BSDHR.

Part No. Case Qty. Price Ea. BSMKT 1 $107.99

Belt System - individual Pieces

Part No. Size Case Qty. Price Ea. BSTBT 32“ – 50”/80 – 130 cm 1 $22.18BSSTP Max 55”/140 cm 1 $16.62BSPOU 12“ x 14.5”/30 x 37 cm 1 $23.41BSPBG 6“ x 8”/15 x 20 cm 1 $16.62BSSCH 7“ x 8.5”/18 x 22 cm 1 $30.53BSBTH 4“ x 7”/10 x 18 cm 1 $13.80BSDHR 3“ x 5”/8 x 13 cm 1 $26.36


Window CleaningHolsters • Chemicals • Cloths

ErgoTec® Ninja BucketOnABelt & Classic BucketOnABeltHolder for squeegees, washer, scraper and cleaning liquid. Available in standard and classic versions. ErgoTec® version is for right- or left-handed use.

Part No. Size Case Qty. Price Ea. BB010 ErgoTec® 5 $36.90BB020 “Classic” 5 $36.90

•Holds all important tools at your side.•Reduces need to climb up and down ladders.•Sturdy quick-release strap for easy removal from belt.

BB010

BB020

TheBeltFor attaching the BucketOnABelt and other tools.

Part No. Case Qty. Price Ea. UB000 5 $27.73

•Two loops hold additional tools.•Easy-to-use, side-release buckle.•Made with 2” heavy-duty nylon webbing.

LeatherHolsterLeather tool holder with 2 compartments. Attaches to any belt.

Part No. Case Qty. Price Ea. HT000 5 $29.24

•Holds squeegees and washers.•Made of top grain leather.•Fits on most belts.

EasyGlideGlassCleanerLiquid window cleaner that leaves behind a smooth surface for squeegees to glide across. 100:1 concentrate. Makes 25 gallons per quart.

Part No. Size Case Qty. Price Ea. FR110 1 quart 6 $12.73FR380 1 gallon 4 $45.84

•Biodegradable, skin friendly and non-toxic.•Simply add to water.•Cleans windows with little effort.

ThePillGlassCleanerPre-measured, individually packaged, mix with 2½ gallons of water.

Part No. Size Case Qty. Price Ea. PL100 10 strips x 10 pills 10 strips $6.72PL500 5 rolls x 100 pills 500 pills $248.95

•Biodegradable, skin friendly and non-toxic.•Powers through dirt and grime.

RubOutProfessional glass cleaner for removing hard-water stains, rust, mineral deposits, lime scale and soap scum.

Part No. Size Case Qty. Price Ea. RUB20 1 pint 12 $10.48

•Scrub stains without harming surface.•Super strength with a pleasant scent.

UngerProfessionalGelConcentrated cleaning gel for direct application onto washer. Highly effective even on the dirtiest windows.

Part No. Size Case Qty. Price Ea. FG050 1 pint 10 $12.73

•Thick formulation allows better control when dispensing.

•Apply directly onto washer.•Tough on dirt, yet safe for skin.

MicroWipeTM & Giant MicroWipeTM

Microfiber cloth ideal for ledges and frames on windows and mirrors. Available in two sizes.

Part No. Size Case Qty. Price Ea. MF40L 16“ x 16”/40 x 40 cm 10 $6.07MF60L 24“ x 32”/60 x 80 cm 5 $18.21

•Superior water absorption, no streaks.•Two surfaces: coarse for cleaning,

smooth for polishing.•Ultrafine microfiber cloth for wet and dry use.

Neoprene GlovesProtective gloves guard against elements. Neoprene exterior, plus interior foam insulation.

Part No. Size Case Qty. Price Ea. GLOV1 Small 10 $42.91GLOV2 Large 10 $42.91GLOV3 XLarge 10 $42.91

•Protect against cold and damp conditions.•Textured palm provides a non-slip grip.•Hook and loop strap provides a secure fit.

Scrim TowelUse for detailing, spot cleaning glass, polishing or removing excess water from window sills.

Part No. Type Size Case Qty. Price Ea. SCRM1 Unwashed 36“ x 36”/ 10 $10.39 86 x 86 cmSCRMW Washed 36“ x 36”/ 10 $11.22 86 x 86 cm


Window CleaningPro Bucket • Kits

ProBucketHeavy-duty bucket with ergonomic handle. Accommodates 18“ washers and squeegees.

Part No. Size Case Qty. Price Ea. QB220 6 gal./28 liter 5 $43.37

•Holds over 6 gallons.•Includes measuring units, large footprint for increased

stability and rounded pour spouts on 2 corners for easy emptying.

•Accessories: ProBucket Lid, BucketBarge, Casters and BucketSieve.

ProBucket LidSturdy snap-on lid for ProBucket.

Part No. Case Qty. Price Ea. QB080 5 $13.04

•Notched tabs lock handle into upright position when lid is in place.

•Inner seal provides splash and leak protection.•Removes easily using tabs on each corner.

BucketSieveBucket sieve for wringing out washers.


•Lightweight, easy to handle.•Features a chemical-resistant coating.•Can wring out up to an 18” washer.

TheBucketBargeBarge with swivel-ball casters and bumper guards for ProBucket.


•Features smooth-gliding swivel-ball casters.•Bumper guards protect against splashes.•Holds onto bucket base, easily detaches.

ProBucket CastersSwivel casters with threaded inserts for ProBucket.

Part No. Size Case Qty. Price Ea. QB070 5 x 4 packs 5 $42.63

•Casters easily snap into ProBucket.•Swivel casters with theaded inserts come four

to a set.

4.5 GallonBucket with Sieve4.5 gallon bucket for glass cleaning.

Part No. Size Case Qty. Price Ea. QB120 4.5 gal./18 liters 10 $25.47

•Easy to handle and lightweight.•Plastic sieve for washer and squeegee.•Holds up to 4.5 gallons and 14” washer.

ErgoTec® SetHigh-quality glass cleaning set features a selection of ergonomic window cleaning tools.

Part No. Case Qty. Price Ea. ETSET 1 $245.27

Kit Contents Nylon Carrying CaseEH350 14” ErgoTec® T-BarNS350 14” Micro StripWasher® SleeveETG00 ErgoTec® Squeegee HandleNE250 10” “S” Channel w/ ErgoTec® Soft RubberNE350 14” “S” Channel w/ErgoTec® Soft RubberNE450 18” “S” Channel w/ErgoTec® Soft RubberRT920 36” ErgoTec® Soft Replacement RubberPCLIP Plastic Clips and CaseSH00C 4” ErgoTec® ScraperSR500 1.5” ErgoTec® Safety ScraperMF40L 3 MicroWipes® (16” x 16”)EZ250 8’ OptiLoc® 2-section Tele-PoleNCAN0 ErgoTec® Safety ConePL100 ThePillGlassCleaner (10 pack)

Tran-Set Cleaning KitCleaning set in convenient vinyl/nylon case.

Part No. Case Qty. Price Ea. TRS00 1 $262.52

Kit Contents Nylon Carrying CasePR000 Pro StainlessSteelSqueegee HandleNE250 10” “S” Channel/ErgoTec® Soft RubberNE350 14” “S” Channel w/ErgoTec® Soft RubberNE450 18” “S” Channel w/ErgoTec® Soft RubberRT920 36” ErgoTec® Soft RubberWC350 14” Original StripWasher® Strip PacEZ250 8’ OptiLoc® 2-section Tele-PoleNCAN0 ErgoTec® Safety ConeFIXI0 FIXI-clampHBR00 HandiBrushSP010 Large SpongeSR040 Safety ScraperTX100 ProTrim10 Scraper

PROWindowCleaningKitStart-up cleaning kit.

Part No. Case Qty. Price Ea. PWK00 1 $112.70

Kit Contents EZ250 8’ OptiLoc® 2-section Tele-PoleWC450 18” Original StripWasher® Strip PacPR000 Pro StainlessSteelSqueegee HandleNE350 14” “S” Channel w/ErgoTec® Soft RubberNE450 18” “S” Channel w/ErgoTec® Soft RubberTX100 ProTrim10 ScraperSP010 Large Sponge


Window CleaningIndoor Window Cleaning

•Drip-freeindoorwindowcleaning.•Quickandeasycleaningforhardtoreachareas.•Nowaterspillsordripsonwindowsills,frames,carpetsandfurniture.•Cleaninonesimplestep–nosqueegeerequired.•Windowsdrystreakfree.•Pad holder with Velcro attaches to Microfiber cleaning pads.•Includesshortmicrofiberpadforpolishing. Optional long microfibers for heavier dirt and grime available.

Unger SpeedCleanTM Window Kit

PHP20

SOABG

AFAETPHH20

Unger SpeedCleanTM Window KitPart No. Case Qty. Price Ea. CK053 1 $125.00Kit Contents Product Kit Qty.SOABG SprayerOnABelt 1PHH20 8” Aluminum Pad Holder 1MF40L MicroWipeTM Microfiber 5AFAET HiFlo Thread Adapter for Aluminum Poles 1PHP20 8” Microfiber “Washing” Pad 5ED180 OptiLocTM Three-Section Telescopic Pole - 6’ 1

ED180

MF40L

Fill the Sprayer with Pure Water and spray the water directly on the pad (PHP20 shown with SOABG).

Microfiber Polishing PadSmooth finish for polishing glass.

Part No. Size Case Qty. Price Ea.PHP20 8“/20 cm 5 $5.95

•Leaves windows residue- and streak free.•Use with pad holder PHH20.

Aluminum Pad HolderPad holder with swivel head easily glides across windows.

Part No. Size Case Qty. Price Ea.PHH20 8“/20 cm 5 $15.00

Microfiber Washing Pad8“ pad for window cleaning.

Part No. Size Case Qty. Price Ea.PHW20 8“/20 cm 5 $7.95

•Best cleaning with minimal drag.•Use with pad holder PHH20.

Microfiber MicroWipeTM Microfiber cloth ideal for ledges and frames on windows and mirrors.

Part No. Size Case Qty. Price Ea. MF40L 16“ x 16”/40 x 40 cm 10 $6.07

•Superior water absorption.•Two surfaces: coarse for cleaning,

smooth for polishing.•Ultrafine microfiber cloth for wet and dry use.

SprayerOnABelt PatentedCombined with SmartColor Microwipe, makes surface/wet cleaning faster and easier.

Part No. Size Case Qty. Price Ea. SOABG 33 oz./1 liter 5 $28.67

•Sprayer hooks onto belt, providing optimal weight support.•Flexible hose extends 3’ for upside-down spraying.•33 oz. bottle included.

HiFloTM MultiLink Y-AdapterAttach two tools to one pole.

Part No. Case Qty. Price Ea.FTYAD 5 $102.00

•Solidanodizedaluminum.•FitsonallHiFloTM and TelePlusTM Poles with AFAET adapter.•Quicktoolchangebyturningthepole.

HiFloTM Thread AdapterAdapter connects aluminum poles to pad holder.

Part No. Case Qty. Price Ea.AFAET 5 $12.50

•Attach to Unger pole with thread adapter AFAET.

3 Sections2 Sections 4 Sections/Plus 4 5 Sections/Plus 5

3 Sections2 Sections

ErgoTec® Locking ConeThe ErgoTec® Locking Cone is standard on all OptiLoc and TelePlus® poles. (Patented)





www.ungerglobal.com

OptiLocTM

Telescopic pole in 2 sections, with the ErgoTec® Locking Cone. Part No. Size Sections Pack Unit Price Ea. EZ120 4’/1.25 m 2 Any 10 $30.49EZ250 8’/2.50 m 2 Any 10 $44.57EZ300 10’/3.00 m 2 Any 10 $50.21EZ370 12’/3.75 m 2 Any 10 $56.06EZ400 13’/4.00 m 2 Any 10 $59.69EZ500* 16’/5.00 m 2 Any 10 $68.62EZ600* 20’/6.00 m 2 Any 10 $76.74

OptiLocTM

Telescopic pole in 3 sections, with the ErgoTec® Locking Cone. Part No. Size Sections Pack Unit Price Ea. ED180 6’/1.85 m 3 Any 10 $45.19ED370 12’/3.75 m 3 Any 10 $69.49ED450 14’/4.50 m 3 Any 10 $76.93ED550 18’/5.50 m 3 Any 10 $91.77ED600 20’/6.00 m 3 Any 10 $95.20ED750* 24’/7.50 m 3 Any 10 $110.65ED900* 30’/9.00 m 3 Any 10 $128.35

UniTecTM

Telescopic pole in 2 sections, secure lock 1/2 turn. Part No. Size Sections Pack Unit Price Ea. OS210 6.5’/2.00 m 2 Any 10 $29.32OS250 10’/3.00 m 2 Any 10 $36.90OS260 13’/4.00 m 2 Any 10 $45.99

Henry’s Handi Handle With nylon cone, 1 section. Part No. Size Sections Pack Unit Price Ea. HH240 2’/60 cm 1 5 $15.48

Plus 3 Extension for 2-section base unit. Part No. Size Sections Pack Unit Price Ea. T3120 4’/1.25 m 1 Any 10 $34.14T3180 6’/1.85 m 1 Any 10 $37.34

Plus 4 Extension for 3-section base unit, or Plus 3. Part No. Size Sections Pack Unit Price Ea. T4120 4’/1.25 m 1 Any 10 $37.54T4180 6’/1.85 m 1 Any 10 $48.76

Plus 5 Extension for 4-section unit, or Plus 4. Part No. Size Sections Pack Unit Price Ea. T5120 4’/1.25 m 1 Any 10 $40.16T5180 6’/1.85 m 1 Any 10 $55.25

TelePlusTM 4’/1.25m System Modular Telescopic pole with the ErgoTec® Locking Cone. Part No. Size Sections Pack Unit Price Ea. TZ250 8’/2.50 m 2 Any 10 $49.51TD370 12’/3.70 m 3 Any 10 $75.60TV500 16’/5.00 m 4 Any 10 $102.62TF620 21’/6.25 m 5 Any 10 $128.83

TelePlusTM 6’/1.85m System Modular Telescopic pole with the ErgoTec® Locking Cone. Part No. Size Sections Pack Unit Price Ea. TZ370 12’/3.75 m 2 Any 10 $55.25TD550 18’/5.50 m 3 Any 10 $96.11TV750 24’/7.50 m 4 Any 10 $129.13TF900 30’/9.00 m 5 Any 10 $161.93

*Poles ship by truck only. $1000 orders are freight free for truck shipments. Minimum of 10 poles required. Use any combination of sizes to reach minimum.

Telescopic Poles

• 2-section telescopic pole, available in 3 sizes.• Interior lock, 1/2 turn in either direction.

• 2- or 3-section telescopic pole, available in 14 sizes.

• Modular telescopic pole system.• Base units with 2, 3, or 4 sections.• Extensions available in 4- or 6- foot lengths.

UniTec

OptiLocTM

TelePlusTM System


Dusting & Maintenance

StarDuster® ProFlat 75Ideal for narrow gaps. Includes machine washable microfiber sleeve and 3 electrostatic disposable sleeves.

Part No. Size Case Qty. Price Ea. PFD7G 30”/75 cm 10 $21.64

•Strong, flexible, plastic design.•Flexible to clean high or low.•Attaches to ErgoTec® Locking Cone for

safe use for high tasks.

SmartColor MicroMittMicrofiber duster mitt fits comfortably over a person‘s hand.

Part No. Size Case Qty. Price Ea. MMITG 8“ x 10.5”/20 x 27 cm 5 $10.81

•Polyester liner protects hands and increases user comfort.

•Excellent for dusting surfaces such as glass, marble, mirrors, etc.

•Long lasting – up to 300 wash cycles.

StarDuster® ProFlex/ ProFlat SleevesFor use with both the StarDuster ProFlex/ProFlat 75.

Part No. Type Contents Case Qty. Price Ea. PS10W Disposable 10 pack 1 $6.11PS50W Disposable 50 pack 1 $22.93PM05W Microfiber 5 pack 1 $43.24

•Disposable electrostatic and machine washable microfiber sleeves available.

StarDuster® ProFlex 75The StarDuster ProFlex 75 is great for cleaning overhead, underneath furniture, and around corners.

Part No. Size Case Qty. Price Ea. PXD7G 30”/75 cm 10 $25.88

•Bends and retains shape to clean hard-to-reach areas.•Microfiber sleeve is removable and machine washable. •Comes with 3 electrostatic disposable sleeves.•Attaches to ErgoTec® Locking Cone for

safe use for high tasks.

SmartColor MicroSleeveMicrofiber sleeve fits over lambswool and poly duster heads, preserving the head and increasing efficiency.

Part No. Size Case Qty. Price Ea. MMSLG 6“ x 14”/15 x 36 cm 5 $8.63

•Attract and trap more dust with microfiber sleeve than with ordinary duster.

•Use with or without chemicals.•Long lasting – up to 300 wash cycles.

Bends and

Holds ANY

Shape!



Microfiber DustersStarDuster® ProCeilingFan Duster Patent PendingMicrofiber StarDuster® ProCeilingFan-Duster can easily and effectively clean all shapes and sizes of ceiling fan blades, even the new wider blades.

Part No. Case Qty. Price Ea. CEDUG 5 $17.94

•Use by hand or attach to any telescopic pole for high-access cleaning.

•Plush microfiber strands aggressively trap and hold dirt.•Microfiber sleeve is removable and machine washable.

SmartColor MicroMitt Heavy-DutyMicrofiber dust and wash mitt.

Part No. Case Qty. Price Ea. MMIRG 5 $11.90

•2-sided microfiber mitt with multi-purpose cleaning power.

•Thick, soft strands allow increased surface area for incredible absorbency and dirt pickup.

•Premium grade low pile microfiber on reverse side is ideal for dusting and polishing.

StarDuster® LambswoolMade of lambswool. Perfect for dusting shelves and other surfaces.

Part No. Case Qty. Price Ea. LWDU0 6 $18.78

•Superior cleaning and dust removal.•Handle attaches to any Unger cone or standard

ACME thread.•Also use with ProDuster Replacement Sleeves

(DS50Y) or microfiber (MMSLG).

OstrichFeatherDusterMade with real ostrich feathers for dusting delicate surfaces such as glass, cabinets and chandeliers.

Part No. Case Qty. Price Ea. FEDU0 6 $24.28

•Superior dust removal.•Attaches to telescopic poles.

StarDuster® PipeBrush11” curved brush for cleaning pipes and other round surfaces. Bendable.

Part No. Case Qty. Price Ea. PIPE0 5 $21.01

•Made with heavy-duty wire and polypropylene bristles.

•Attaches to telescopic poles.

StarDuster® WallBrushOval shape for ceiling fans, walls and ceilings. Made of heavy-duty galvanized wire and 49% horsehair bristles.

Part No. Case Qty. Price Ea. WALB0 5 $25.71

•Ideal for dusting rough surfaces.•Ideal for removing cobwebs and dust

from flat objects.•Attaches to telescopic poles.

StarDuster® ProDusterTelescopic lambswool duster with bendable head and sleeve. Ideal for dusting in high places.

Part No. Size Case Qty. Price Ea. LWDUR 30“–60”/70-150 cm 10 $22.67DS10Y 10 pack Sleeve 1 $7.64DS50Y 50 pack Sleeve 1 $30.57

•Extends from 30” – 60”.•Disposable duster sleeve attracts and holds dust,

keeping it away from worker and fixtures below.

CobWeb Duster BrushSplit-tipped soft poly fibers allow for effective dusting without scratching. Great for dusting ceilings, moldings and corners whether inside or outdoors.

Part No. Case Qty. Price Ea. COBW0 6 $9.33

•Elecrostatic energy attracts and holds dust, dirt and cobwebs.

•Attaches to ErgoTec® Locking Cone or ACME thread for safe use on high tasks.

SootMasterSpongePerfect for cleanup after fire or smoke damage. Dry sponge absorbs dust and soot particles.

Part No. Size Case Qty. Price Ea. SP060 2“ x 3“ x 6” 6 $9.04

•Can be cut, if smaller size is required.•Rinsable rubber material.

FIXI-ClampPlastic clamp for attaching tools like brushes, sponges and cloths.

Part No. Product Case Qty. Price Ea. FIXI0 FIXI-Clamp 5 $37.17HBR00 Handi-Brush 5 $15.07SP010 The Sponge 10 $2.97

•Firmly holds sponge, microfiber cloths and other tools.•Slots provided to insert Handi-Brush.•Fits onto telescopic pole.





TheBebbeSafely remove broken lightbulb base from socket.

Part No. Case Qty. Price Ea. BEBE0 5 $18.89

•Fully insulated.•Complete with plastic tray for catching broken

bulb pieces.

FloodSucker Bulb ChangerFor changing floodlights and other flat lightbulbs. Features suction cups that attach to bulb.

Part No. Case Qty. Price Ea. FS000 5 $25.71

•Fully insulated.•Change bulbs safely from the ground when using

with telescopic poles.•Faster and safer than using a ladder.

StickyFingers Bulb ChangerEasily change lightbulbs safely from the ground. Rubber-coated spring steel fingers offer quality turning power.

Part No. Case Qty. Price Ea. BS010 5 $20.05

•Snaps onto telescopic pole for changing bulbs in high-access areas.

•Adjusts to fit various-shaped bulbs.•Use with CFL bulbs.


Tool Adapters • Bulb Changing

ErgoTec® Locking Cone PatentedPrevents select Unger tools from pulling off the telescopic pole.

Part No. Case Qty. Price Ea. NCAN0 5 $5.94

•Securely locks onto pole.•Compatible with all Unger extension poles.•Fast tool change with quick-release button.

ThreadedWoodConeAdapterWood cone adapter for attaching tools.

Part No. Case Qty. Price Ea. TWA00 5 $5.18

•Features an internal ACME thread.•Pressure fitted.

UniversalAdapterIntended for holding paint brushes/ rollers, scrapers and other tools.

Part No. Case Qty. Price Ea. PBR00 5 $20.22

•Provides safe operation from the ground.•Adjust tool to any angle; locks securely using

a nut and bolt.•Firmly holds tools.

CrankedJointAngleAdapterAdjust tools to clean at any angle up to 300O. Perfect for cleaning hard-to-reach places.

Part No. Thread Case Qty. Price Ea. CJA00 Zinc 5 $21.19CJN00 Plastic 5 $17.62

•Attaches directly onto pole.•Available in strong zinc or plastic.•Squeegees, washers, etc. quickly attach.

• Ungertools*lockinplaceontoconeforsafety.

• Theconeattachessecurelytothepole.

• Fasttoolchangewithquick-releasebutton.

• AllUngerOptiLocTMandTele-PlusTMpolesareequippedwiththeErgoTec®lockingcone.

*Pay attention to the LOCK imprint on handles of ErgoTec® window tools, VisaVersa®, and StarDuster® ProFlex/ProFlat 75. Note: All other Unger tools fit as usual on the cone in the usual way by attaching or screwing on.

Tool Lock

Tool Release

Cone Release

Cone Lock

ErgoTec® Locking Cone Patented

The ErgoTec® Locking Cone offers maximum safety when working with telescopic poles.


LYN DISTRIBUTING VACUUMS

Phone 801-295-5022 111

VACUUM SANITAIRE W/DUST CUP SC887 Powerful 7 amp / 840 watt commercial motor. Lifetime Lubricated Motor. 6 Level Carpet Height Adjustment. Heavy Duty Dust Cup System - No Bag. Standard Filtration.50 Foot 3-wire Grounded Cord. Vibra -Groomer II, Chrome Steel Ball Bearing Brush Roller, w ith Replaceable Bris tle Strips. Wide Protective Vinyl Bumper. 12" Cleaning Path. Chrome Steel Handle . Reinforced Quick Kleen Base Assembly. Motor Hood: Chrome Steel. Weight 17.4 lbs.

VACUUM SANITAIRE NO LITE SC886 Powerful 7 amp / 840 watt commercial motor. Lifetime Lubricated Motor. 6 Level Carpet Height Adjustment. Heavy Duty Top Filling Cloth Bag Dump Out System. Standard Filtration.50 Foot 3-wire Grounded Cord. Vibra-Groomer II, Chrome Steel Ball Bearing Brush Roller, with Replaceable Bristle Strips. Wide Protective Vinyl Bumper. 12" Cleaning Path. Chrome Steel Handle. Reinforced Quick Kleen Base Assembly. Motor Hood: Chrome Steel. Weight 16 lbs.

VACUUM SANITAIRE CONTRACTOR BAGGED SC883 Powerful 7 amp / 840 watt commercial motor. Impact-resistant. Durafan fan motor. Lifetime lubricated motor. Allergen Filtration. Odor Eliminating Outer Bag. Easy-gliding rear wheels. Quick-change power cord and furniture guard. Fingertip on/off switch. Quick-access fan chamber. Quick-change bristle strips. Paper Dust Bag. 12 Inch Cleaning Path. Extra Long 50 Ft. Cord. Weight - 19 lbs. Dirt Capacity - 9.5 Quarts. Decibel Level 79. Motor CFM - 145

VACUUM SANITAIRE CONTRACTOR BAGLESS SC882 Powerful 7 amp / 840 watt commercial motor. Impact-resistant. Durafan fan motor. Lifetime lubricated motor. E-Z Kleen Dirt Cup - No Bags Necessary . Easy-gliding rear wheels. Quick-change power cord and furniture guard. Fingertip on/off switch. Quick-access fan chamber. Quick-change bristle strips. 12 Inch Cleaning Path. Extra Long 50 Ft. Cord. Weight - 20 lbs. Dirt Capacity – 1.9 Quarts. Decibel Level 79. Motor CFM - 145

VACUUM SANITAIRE DUST CUP SC695 Heavy Duty Dust Cup System - No Bag, 7 amp commercial motor, 1.9 quart capacity, 12 inch cleaning path, No headlight. 50 foot commercial power cord, 79 dBA sound level, Weight 18 lbs., 6-stage carpet height adjustment, Metal Vibra Groomer II brush roll, No on-board tools, 2 year warranty. . Capacity – 1.9 Quarts. . Motor CFM - 145

VACUUM EUREKA SANITAIRE MAIDSAVER SC689 5 amp motor, Bagless EZKleen dust cup bag less system, 30 foot cord, No headlight, 4 level carpet height adjustment, 12 inch cleaning path, 1 year warranty. Adjustable 3-Position Handle. Weight 15 lbs. Capacity – 1.9 Quarts. . Motor CFM - 120

VACUUM SANITAIRE SC888 7 amp motor, 50 foot power cord, 12 inch cleaning path, Vibra Groomer I, chrome steel ball bearing brush rolle r with replaceable bristle strips, removable clear fan chamber, New top-fill bag chamber, 2 year warranty. No Headlight. Allergen Micron Filter system. Weight 16 lbs., Wide Protective Vinyl Bumper. Capacity – 9.5 Quarts. Decibel level 79. Motor CFM - 145 CRI Green Label approved.

VACUUM SANITAIRE 16" SC899 7 amp motor, 50 foot power cord, 16 inch cleaning path, Vibra Groomer I, chrome steel ball bearing brush rolle r with replaceable bristle strips, removable clear fan chamber, Heavy Duty Cloth Bag Dump out system, 2 year warranty. No Headlight. . Weight 18.5 lbs., Wide Protective Vinyl Bumper. Capacity – 18 Quarts. Decibel level 79. Motor CFM - 145

114

LYN DISTRIBUTING VACUUMS

Phone 801-295-5022 112

VACUUM HOOVER COMMERCIAL C1703 3-layer allergen filtration, On-board tools, 13 inch cleaning width, 6 Piece On -Board Tool Set includes stretch hose, 2 extension wands, upholstery, dusting and crevice tools. Hoover Type Y Regular Vacuum Bags . No Headlight. Only Uses 12 Amps. 35' Durable Power Cord. 1 Year Commercial Warranty.

VACUUM HOOVER CONQUEST 14"With DUST CUP C1800 14" Wide Cleaning Path - One Pass Cleaning. Durable Chrome Steel Handle. Comes with Cloth Bag. Dump Out. EZ -Empty dirt cup cuts costs and reduces down time. Super Tuff Nylon fan. 50 Foot Heavy Duty Power Cord. Top-Fill Collection System. Triple Layer Allergen Filter Paper bag. Heavy Object Clean-Out Trap. Metal Handle. Shielded V-Belt drive helps limit downtime. Clear vinyl Non-Marking Furniture Guard. Manual 6 Position Height Adjustment. 3 Position handle goes flat to pass under low clearance furnishing. Only Uses 6.5 Amps. 1 Year Commercial Warranty

VACUUM HOOVER CONQUEST With DUST CUP 18" C1810 Wide Area One Pass Cleaning. Uses only 7.0 Amps. 18" Cleaning Path. Steel/Polycarbonate Construction. Super Tuff Nylon Fan. 2-Brush "Auger-Action" Brushroller. Triple Layer Allergen Filtration. Bagless vacuum for quick and effortless cleaning - no bags to buy or change. EZ-Empty Dirt Cup. 50 ft. Durable Power Cord. Shielded V-Belt helps limit downtime. Steel Rear Axle & Handle Bail. Foot Activated On/Off Switch. Clear vinyl non-marking furniture guard protects furniture and walls. 3 Position handle goes flat to pass under low clearance furnishings. Large Object Clean-Out Trap. Manual 6 Position Height Adjustment. Weighs 26.7 lbs. 1 Year Commercial Warranty

115

lyn_distributing_literature_2012b.pdf - lyn distributing

Documents