ldica semester:v year:2013-14 s.no date name ... - lbrce

Faculty Name: G.Mahammed Rafi Subject Name: LDICA Semester:V Year:2013-14

S.No DATE NAME OF THE TOPIC NO.OF CLASSES REQUIRED

UNIT-1 OPERATIONAL AMPLIFIER 1 11/06/2013 Introduction to Op-Amp 1 2 12/06/2013 Basic information of Op-amp, Ideal and practical

Op-amp, 1

3 13/06/2013 Manufacturer designation, Ideal Op-Amp 1 4 14/06/2013 Op-Amp internal circuit, 1 5 14/06/2013 D.C Characterstics of Op-Amp 1 6 15/06/2013 A.C Characteristics 1 7 18/06/2013 Inverting Amp ,Non – Inverting Op-Amp , Voltage

follower 1

8 19/06/2013 Differential Amplifier,Inverting summing Amplifier 1 9 20/06/2013 Non-inverting summing Amplifier, Instrumentation

amplifier 1

10 21/06/2013 A.C amplifier, V to I and I to V converters 1 11 22/06/2013 Tutorial class 1 12 25/06/2013 Sample & hold circuits, Multipliers 13 26/06/2013 ,Divider,Discussing problems on applications of op-

Amp 1

14 27/06/2013 Basic,practical Differentiator, Basic Integrator, 1 15 28/06/2013 Basic Integrator,Comparators 1 16 29/06/2013 Tutorial class 1 17 02/07/2013 Applications of Comparator,Schmitt trigger 1 18 03/07/2013 Astable, monostable Multivibrators, 1 19 04/07/2013 Introduction to voltage regulators 1 20 05/07/2013 723 general purpose voltage regulator. 1 21 06/07/2013 Tutorial class 1

UNIT-II ACTIVE FILTERS 22 09/07/2013 Introduction,1st order LPF filters 1 23 10/07/2013 Introduction,1st order HPF filters 1 24 11/07/2013 Band Pass filters 1 25 11/07/2013 Band Reject filters, 1 26 12/07/2013 All pass filter ,Introduction to Oscillators 1 27 16/07/2013 RC,Wein bridge,Quadrature Oscillators 1 28 17/07/2013 Introduction to waveform generators, Triangular

Sawtooth waveform generators 1

29 18/07/2013 Square wave waveform generators 1 30 19/07/2013 Voltage controlled oscillator 1

UNIT-III TIMERS & PHASE LOCKED LOOPS &CONVERTERS

31 20/07/2013 Tutorial class 1 32 23/07/2013 , Introduction to 555 timer 1 33 24/07/2013 Functional diagram Description 1 34 25/07/2013 Monostable Operation of 555 timer 1 35 26/07/2012 , Applications of Monostable Operation of 555

timer 1

36 27/07/2012 Tutorial class 1 37 30/07/2012 Astable Operation of 555 timer 1 38 31/07/2012 Applications of astable Operation of 555 timer 1 39 01/08/2012 PLL - Introduction 1 40 02/08/2013 Analog, Digital phase detectors 1

41 03/08/2013 Tutorial class 1 42 06/08/2013 1st Mid Examinations 1 43 07/08/2013 1st Mid Examinations 1 44 08/08/2013 Principles and description of individual blocks

of 565. (Monolithic PLL) 1

45 13/08/2013 Monolithic PLL Capture range derivation 1 46 14/08/2013 Applications of PLL 1 47 16/08/2013 Introduction to basic DAC techniques 1 48 17/08/2013 Tutorial class 1 49 20/08/2013 , Weighted resistor DAC, R-2R ladder DAC,

Inverted R-2R DAC 1

50 21/08/2013 IC 1408 DAC 1 51 22/08/2013 Introduction to ADC techniques,comparator type

ADC,Counter type ADC 1

52 23/08/2013 Servo tracking ADC, Successive approximation ADC

1

53 24/08/2013 DAC,ADC Specifications,Integrating type ADC’s 1 UNIT-IV LOGIC FAMILIES

54 27/08/2013 Introduction to Logic families 1 55 28/08/2013 Classification of Integrated Circuits 1 56 30/08/2013 Characterstics of Logic families 1 57 31/08/2013 Tutorial class 1 58 03/09/2013 Standard TTL NAND Gate – Analysis &

characteristics, Open collector O/P’s 1

59 04/09/2013 Tristate TTL 1 60 05/09/2013 MOS Characterstics ,CMOS open drain and

tristate outputs, CMOS transmission gate 1

61 06/09/2013 IC interfacing - TTL driving CMOS & CMOS driving TTL

1

62 07/09/2013 Tutorial Class 1 63 10/09/2013 Design using TTL-74XX & CMOS 40XX series

Encoder,priority encoder,multiplexers 1

64 11/09/2013 Priority generators/checker circuits Demultiplexers & their applications, Digital comparator circuits

1

65 12/09/2013 Digital arithmetic circuits-parallel binary adder/subtractor using 2’s Complement system

1

66 13/09/2013 Code Converters 1 67 14/09/2013 Tutorial Class 1 68 17/09/2013 Decoders&drives for LED&LCD display 1 UNIT-V SEQUENTIAL CIRCUITS&MEMORIES 69 18/09/2013 ROM Architecture, 1 70 19/09/2013 ROM types & applications 1 71 20/09/2013 RAM architecture, Static RAMs 1 72 21/09/2013 Tutorial Class 1 73 24/09/2013 Dynamic RAMs 1 74 25/09/2013 Synchronous DRAMs 1 75 26/09/2013 Introduction to IC counters 1 76 27/09/2013 74XX & CMOS 40XX series of IC counters 1 77 28/09/2013 Tutorial Class 1 78 01/10/2013 Beyond the syllabus-Special Types of Memories 1 79 02/10/2013 Beyond the syllabus- Higher order Filters 1 80 03/10/2013 OVERVIEW OF UNIT-I 1 81 04/10/2013 OVERVIEW OF UNIT-II 1 82 05/10/2013 OVERVIEW OF UNIT-III 1 83 08/10/2013 OVERVIEW OF UNIT-IV 1 84 09/10/2013 OVERVIEW OF UNIT-V 1 TOTAL NO OF CLASSES 84 TOTAL CLASSES REQUIRED TO COMPLETE THE SYLLABUS 77

Faculty Name: R.ANJANEYULU NAIK Subject Name: CONTROL SYSTEMS

Semester: V Year:2013-14

Sl.

No. Unit Topic(s)

Tentative

Date Actual Date

No of Lec

Hours

1

UN

IT –

I

C

ON

TR

OL

SY

ST

EM

MO

DE

LL

ING

Introduction to Control Systems 10/06/13 1

2 Open loop and feedback systems 11/06/13 1

3 Characteristics of feedback control systems 12/06/13 1

4 Modeling of mech trans systems and TF 13/06/13 1

5 Modeling of mech rotational systems and TF 14/06/13 1

6

Transfer Function of electrical systems 17/06/13 1

7 Transfer Function of electrical systems 18/06/13 1

8

F-V and F-I analogy of mechanical systems 19/06/13 1

9 T-V and T-I analogy of mechanical systems 20/06/13 1

10 TUTORIAL 21/06/13 1

11 Rules for Block Diagram Reduction 24/06/13 1

12 F-V and F-I, T-V and T-I examples explanation 25/06/13 1

13 Example for BDR method 26/6/13 1

14 Intro. to Stepper motors, AC servo motor 27/06/13 1

15 Tutorial 28/06/13 1

16 DC servo motor & Synchros. 01/07/13 1

17 Transfer Function of AC &DC servo Motors 2/07/13 1

18 Signal Flow Graphs 3/07/13 1

19 Signal Flow Graphs and Mason’s Gain Formula 4/07/13 1

20 Tutorials 5/07/13 1

21 Example for SFG explanation 8/07/13 1

22 Previous question paper discussion 9/07/13 1

Sl.

No. Unit Topic(s)

Tentative

Date Actual Date

No of Lec

Hours

23

UN

IT –

II

TIM

E D

OM

AIN

AN

AL

YS

IS

Introduction to Time domain analysis

• Laplace Transformation Technique – Review

10/7/13 1

24 Standard Test signals 11/7/13 1

25 TUTORIAL 12/7/13 1

26 Time response of first order &second order

systems

15/7/13 1

27 Time Domain Specifications 16/7/13 1

28 Steady state error and static error coefficients 17/7/13 1

29 Concepts of stability 18/7/13 1

30 TUTORIAL 19/7/13 1

31 Routh Hurwitz criterion 22/7/13 1

32 Examples for RH C 23/07/13 1

33 Root Locus Concept 24/7/13 1

34 Root Locus Rules & problem solving 25/07/13 1

35 TUTORIAL 26/07/13 1 36

UN

IT –

III

FR

EQ

UE

NC

Y D

OM

AIN

A

NA

LY

SIS

Introduction to freq. domain analysis 29/7/13 1 37 Correlation between frequency domain and time 30/7/13 1 38 Stability analysis using Bode Plot Concept 31/07/13 1 39 Bode Plot – Problem Solving 01/08/13 1 40 Polar plot – Problem Solving 02/08/13 1 41 I MID EXAM 05/08/13 1 42 I MID EXAM 06/08/13 1 43 I MID EXAM 07/08/13 1

44 Problem on polar & nyquist plot 08/08/13 1

45 GM & PM –polar plot stability analysis 12/08/13 1

46 TUTORIAL 13/08/13 1

47 stability analysis – nyquist plot 14/08/13 1

48 Comparision b/n bode,polar & nyquist plots 16/08/13 1

49 Tutorial

19/08/13 1

50

UN

IT-

IV

CO

MP

EN

SA

TO

R

Introduction to COMPENSATTION

domain

20/08/13 1

51 Types of n/w - example 21/08/13 1

52 Lag compensator using RL &Bode plot 22/08/13 1

53 TUTORIAL 26/08/13 1

54 Lag compensator using RL &Bode plot-examples 27/08/13 1

55 Lead compensator using RL &Bode plot 30/08/13 1

56 Lag-lead compensator rules & construction 02/09/13 1

57 Comparision b/n lead-lag-lead-lag n/ws 03/09/13 1

58 Introduction to P-PI-PID controllers 04/09/13 1

59 TUTORIAL 05/09/13 1

60 introduction to the state variable concept &

methods

06/09/13 1

Sl.

No. Unit Topic(s)

Tentative

Date Actual Date

No of Lec

Hours

61 Build SSM from DE & TF 10/9/13 1

62 physical variable - phase variable and diagonal

forms from time domain

11/09/13 1

63 TUTORIAL/slip test

12/09/13 1

64

UN

IT-V

Solution of state equations - homogenous and non

homogenous cases

13/09/13 1

65 Properties of state transition matrix-&problems

on STM

16/09/13 1

66 Relation between transfer function and state

space models

17/09/13 1

67 Concept of Controllability& Observability & tests 18/09/13 1

68 TUTORIAL 19/09/13 1

69 SLIP-TEST 20/09/13 1

70 Beyond the syllabus: Discrete Control System 23/09/13 1

71 Introduction to Optimal & Robust control 24/09/13 1

72 Industrial automated systems & their applications 25/09/13 1

73 REVISION 26/09/13 1

74 REVISION 27/09/13 1

75 REVISION 30/09/13 1

76 REVISION 01/10/13

1

77 REVISION 2/10/13

1

78 REVISION 3/10/13

1

79 REVISION 4/10/13

1

80 REVISION 7/10/13

1

TOTAL NO. OF HOURS REQUIRED

TO COMPLETE THE SYLLABUS

68

Faculty Name: N.Prasad Subject Name: Computer Organization(Co) Semester: I Year: 2013-2014

S.No Date Name Of The Topic Unit No.

No. of Hours

Teaching

Method

Remarks

Register Transfer Language And Micro operations

I 17 BB,OHP

1 11-06-13 Introduction ,Overview of Syllabus 1

2 12-06-13 Basic Concepts related to Computers 1

3 12-06-13 Register Transfer language 1 4 13-06-13 Register Transfer, Bus and Memory

Transfer 1

5 14-06-13 Arithmetic Micro Operations 1 6 17-06-13 Logic Micro Operations 1

7 18-06-13 Shift Micro Operations 1 8 19-06-13 Shift Micro Operations 1 9 19-06-13 Tutorial 1

10 21-06-13 Arithmetic Logic Shift Unit 1


No. of Hours

Teaching

Method

Remarks

11 24-06-13

Basic Computer Organization And Design: Instruction Codes

I 1 BB,OHP

12 25-06-13

Computer Registers, Computer Instructions Instruction Cycle

1

13 26-06-13 Computer Instructions- Instruction Cycle

1

14 26-06-13 Memory-Reference Instructions 1

15 28-06-13 Memory-Reference Instructions 1

16 1-07-13 Input-Output and Interrupt 1 17 2-07-13 Tutorial 1

Micro Programmed Control: II 17 BB,OHP

18 3-07-13 Control Memory 1

19 3-07-13 Address Sequencing 1

20 05-07-13 Micro Program Example 1 21 8-07-13 Micro Program Example 1

22 9-07-13 Design of Control Unit: Hard Wired Control

1

23 10-07-13 Design of Control Unit: Hard Wired Control

1

24 10-07-13 Micro Programmed Control 1 25 12-07-13 Tutorial 1

26 15-07-13 Central Processing Unit: 1

27 16-07-13 STACK Organization 1 28 17-07-13 Instruction Formats 1 29 17-07-13 Addressing Modes 1 30 19-07-13 Addressing Modes 1 31 22-07-13 DATA Transfer and Manipulation 1 32 23-07-13 Program Control 1 33 24-07-13 Reduced Instruction Set Computer 1 34 24-07-13 Tutorial 1

Pipelining and Vector Processing III 18 BB,OHP 35 26-07-13 Parallel Processing 1 36 29-07-13 Pipelining, Arithmetic Pipeline 1 37 30-07-13 Instruction Pipeline 1 38 31-07-13 RISC Pipeline 1 39 31-07-13 Vector Processing 1 40 2-08-13 Tutorial 1 41 5-08-13 MID I EXAMINATIONS 42 6-08-13 MID I EXAMINATIONS 43 7-08-13 MID I EXAMINATIONS 44 Computer Arithmetic 45 13-08-13 Fixed Point Representation 1 46 14-08-13 Floating-Point Representation 1


No. of Hours

Teaching

Method

Remarks

47 14-08-13 Addition 1 BB,OHP 48 16-08-13 Subtraction 1 49 19-08-13 Multiplication Algorithms 1 50 20-08-13 Multiplication Algorithms 1 51 21-08-13 Division Algorithms 1 52 21-08-13 Floating-Point Arithmetic

Operations 1

53 23-08-13 Decimal Arithmetic Unit 1 54 26-08-13 Decimal Arithmetic Operations 1 55 27-08-13 Tutorial 1

Memory Organization IV 09 BB,OHP 56 28-08-13 Memory Hierarchy 1 57 30-08-13 Main Memory 1 58 2-09-13 Auxiliary Memory 1 59 3-09-13 Auxiliary Memory 1 60 4-09-13 Associative Memory 1 61 4-09-13 Cache Memory 1 62 6-09-13 Cache Memory 1 63 9-09-13 Virtual Memory 1 64 10-09-13 Tutorial 1

Input-Output Organization V 13 BB,OHP 65 11-09-13 Peripheral Devices 1

66 11-09-13 Input-Output Interface 1 67 13-09-13 Asynchronous Data Transfer 1 68 16-09-13 Asynchronous Data Transfer 1 69 17-09-13 Tutorial 1 70 18-09-13 Modes of Transfer 1 71 18-09-13 Modes of Transfer 1 72 20-09-13 Modes of Transfer 1 73 23-09-13 Priority Interrupt 1 74 24-09-13 Priority Interrupt 1 75 25-09-13 Direct Memory Access 1 76 25-09-13 Direct Memory Access 1 77 27-09-13 Input-Output Processor(IOP) 1 78 30-09-13 Serial Communication 1

79 1-10-13 Tutorial 1 80 2-10-13 UNIT 1 Revision 1 81 2-10-13 UNIT 1 Revision 1 82 4-10-13 UNIT 2 Revision 1 83 7-10-13 UNIT 2 Revision 1 84 8-10-13 UNIT 3 Revision 1 85 9-10-13 UNIT 4 Revision 1 86 9-10-13 UNIT 5 Revision 1

Faculty Name: B V N R SIVA KUMAR Subject Name: Microprocessor And Interfacing

Semester: V Year:2013-14

S.No. DATE

TOPIC

1 10-Jun-13

UN

IT I

Introduction - Microprocessor & Hexadecimal system

2 11-Jun-13 Architecture - Registers

3 13-Jun-13 Memory Segmentation, Registers usage

4 14-Jun-13 Instruction Format, Addressing Mode

5 15-Jun-13 MOV, XCHG instructions, Programs

6 17-Jun-13 Addressing Modes

7 18-Jun-13 Data Transfer Group, Programs

8 20-Jun-13 Data Transfer Group, Flags

9 21-Jun-13 Tutorial - 1

10 22-Jun-13 ADD & ADC instructions

11 24-Jun-13 Arithmatic Group, programs

12 25-Jun-13 Arithmatic Group, programs

13 27-Jun-13 Logical Group, Programs

14 28-Jun-13 Tutorial - 2

15 29-Jun-13 Logical Group, Programs

16 1-Jul-13 String instructions, Programs

17 2-Jul-13 Branching & Control group, Programs

18 4-Jul-13 Branching & Control group, Programs

19 5-Jul-13 Tutorial - 3

20 6-Jul-13 Assembler directives

21 8-Jul-13 Procedures & MACROs

22 9-Jul-13

UN

IT I

I

8086pin configuration, Memory interfacing

23 11-Jul-13 8086pin configuration, I/O interfacing


25 15-Jul-13 Timing diagram

26 16-Jul-13 DMA Data Transfer

27 18-Jul-13 8237 Block Diagram & Interfacing


29 20-Jul-13

UN

IT I

II 8255 PPI - Mode 0, Programs

30 22-Jul-13 DAC Interfacing, Programs

31 23-Jul-13 Stepper motors & Actuators

32 25-Jul-13 Modes 1&2, ADC Interfacing


34 27-Jul-13 Key Board & Display interfacing

35 29-Jul-13 8279 Block diagram

36 30-Jul-13

Revision - Unit I

37 1-Aug-13

Revision - Unit II

38 2-Aug-13

Revision - Unit II

39 3-Aug-13

Revision - Unit III

40 8-Aug-13

I Mid Paper Discussion

41 12-Aug-13 U

NIT

IV

Interrupts, IVT

42 13-Aug-13 Interrupt Response, DOS Interrupts

43 16-Aug-13 Tutorial - 7

44 17-Aug-13 PIC 8259, Modes

45 19-Aug-13 Interfacing & Cascading

46 20-Aug-13 Serial data Transfer

47 22-Aug-13 8251 Architecture


49 24-Aug-13 8251 Interfacing

50 26-Aug-13 Data Transfer programs,

51 27-Aug-13 USB


53 31-Aug-13

UN

IT V

80286 & 80386 Specifications

54 2-Sep-13 Real & Protected mode

55 3-Sep-13 Features

55 5-Sep-13 paging

56 6-Sep-13 Tutorial - 10

57 7-Sep-13 Pentium features,

58 10-Sep-13 Branch Prediction

59 12-Sep-13 Overview


61 16-Sep-13 8051 family specifications

62 17-Sep-13 Architecture

63 19-Sep-13 Pin configuration & Interfacing


65 21-Sep-13 Timer operation

66 23-Sep-13 Timer modes

67 24-Sep-13 Serial Port

68 26-Sep-13 Interrupt structure


70 28-Sep-13 8051 Overview

71 30-Sep-13

Revision - Unit I

72 1-Oct-13

Revision - Unit II

73 3-Oct-13

Revision - Unit III

74 4-Oct-13

Revision - Unit IV

75 5-Oct-13

Revision - Unit IV

76 7-Oct-13

Revision - Unit V

77 8-Oct-13

Revision - Unit V

Faculty Name: Prof.G.Mallikarjuna Rao Subject Name: Process control Instrumentation Semester:V Year:2013-14

Subject: Process control Instrumentation Faculty:

Sl.NO. Topic to be covered Hours Date 1 Block diagram of Process control system 1 2 Liquid level system-Laminar& Turbulent flows 1 3 Interacting system 1 4 Non-Interacting system 1 5 Pressure system 1 6 Temperature Process 1 7 Flow Process 1 8 Continuous & Batch Process 1 9 Self-Regulation, Problems 1 10 Tutorial 1 11 Discontinuous control modes 1 12 Discontinuous control modes 1 13 P,PI,PD Control modes 1 14 PID Control mode, Problems 1 15 Problems 1 16 Problems 1 17 Servo & Regulator operation 1 18 Proportional control of a single-capacity process 1 19 Proportional control of a Two capacity process 1 20 Integral & PI control of a process 1 21 PID control of a process, Frequency Response 1 22 Flapper Nozzle Arrangement, Pneumatic

proportional controller 1

23 Pneumatic PI,PD,PID Controllers 1 24 Hydraulic controllers 1 25 Hydraulic controllers 1 26 Electronic controllers 1 27 Electronic controllers 1 28 Electronic controllers 1 29 Evaluation Criterion(1/4th decay ratio) 1 30 IAE,ISE,ITAE 1 31 Problems 1 32 Problems 1 33 Continuous oscillation &PRC methods 1 34 Problems 1 35 I/P&P/I Converters 1 36 Pneumatic Actuators 1 37 Pneumatic Actuators 1

38 Hydraulic &Electro-pneumatic Actuators 1 39 Electric motor Actuators,Two position Actuators 1 40 Control valve 1 41 Various types of control valves, Problems 1 42 Globe& Ball valves 1 43 Diaphragm& Butterfly valves 1 44 Control valve sizing, Problems 1 45 Cavitations & Flashing, Problems 1 46 Cascade control 1 47 Cascade control 1 48 Cascade control 1 49 Feed forward control 1 50 Feed forward control 1 51 Feed forward control 1 52 Ratio control, Problems 1 53 Split range control 1 54 Multivariable control 1 55 Revision 1 56 Revision 1 57 Revision 1 58 Revision 1 59 Revision 1 60 Revision 1

Faculty Name:Mrs.B.Swathi Subject Name:PE Semester:V Year:2013-14

S.No. Date Topics to be covered 1 10-06-13 Introduction to Professional Ethics

2 12-06-13 Unit 1: Scope & Objectives of Engineering Ethics.

3 15-06-13 Approaches, Senses of 'Engineering Ethics'

4 17-06-13 Variety of moral issues, Types of inquiry

5 19-06-13 Moral dilemmas ,Moral autonomy

7 22-06-13 Kohlberg's theory & Gilligan's theory

8 24-06-13 Consensus and controversy, Models of Professional Roles

9 26-06-13 Utilitarian theory

10 29-06-13 Duty ethics Theory.

11 01-07-13 Right theory, justice theory

12 03-07-13 Virtue theory & Self realization ethics

13 06-07-13 Self interest

14 08-07-13 Customs & religions

15 10-07-13 Unit 2: Introduction, Morals, Values and Ethics,

16 15-07-13 Integrity, Work Ethics

17 17-07-13 Service Learning, Civic Virtue

18 20-07-13 Respect for Others, Courage, Living Peacefully

19 22-07-13 Caring, Sharing, Honesty

20 24-07-13 Valuing time Empathy, Self Confidence

21 27-07-13 Co-operation, Commitment

22 29-07-13 Character

23 31-07-13 Spirituality

24 03-08-13 Unit3: Engineering as experimentation

25 12-08-13 Engineering projects (vs.) standard projects

26 14-08-13 Engineers as responsible experimenters

27 17-08-13 The challenger case study

28 19-08-13 Codes of ethics, a balanced outlook on law

29 21-08-13 Unit 4: Introduction to Safety and risk assessment of safety and risk.

30 24-08-13 risk benefit analysis and reducing risk, Collegiality and loyalty

31 26-08-13 Respect for authority collective bargaining

32 28-08-13 Confidentiality, conflicts of interest

33 31-08-13 Conflicts of interest types, Occupational crime

34 02-09-13 Professional rights, employee rights.

35 04-09-13 Intellectual Property Rights (IPR) discrimination.

36 07-09-13 Intellectual Property Rights (IPR) discrimination

37 11-09-13 The Three Mile Island and Chernobyl case studies

38 16-09-13 Unit 5:Introduction, Multinational organisations

39 18-09-13 Computer ethics

40 21-09-13 computer crimes ,privacy &anonymity

41 23-09-13 Environmental ethics

42 25-09-13 Weapons development

43 28-09-13 Consulting engineers,

44 30-09-13 Engineers as managers

45 05-10-13 Engineers as expert witnesses and advisors

46 07-10-13 Moral leadership

47 09-10-13 Sample code of Ethics in general & specific to EIE

Faculty Name: D.V.LAKSHMI & J.BHARATHI Subject Name: LICA - LAB Semester: V Year:2013-14

S.No. Week Date Experiment Remarks

1. Thursday 14/06/2013 Introduction

2. Tuesday 18/06/2013 Introduction

3. Thursday 20/06/2013 OP-Amp applications-Adder, Subtractor Comparator circuits.

4. Tuesday 25/06/2013 Integrator & Differentiator circuits using IC 741.

5. Thursday 27/06/2013 Active filter applications-LPF&HPF (First order).

6. Tuesday 2/07/2013

7. Thursday 04/07/2013 IC 741 Oscillator circuits-Phase shift &Wien Bridge oscillator.

8. Tuesday 09/07/2013

9. Thursday 11/07/2013

Function generator using OP-Amp.

10. Tuesday 16/07/2013

11. Thursday 18/07/2013 IC 555 Timer- Monostable & Astable Multivibrator

12. Tuesday 23/07/2013

13. Thursday 25/07/2013

Schmitt Trigger using IC 741 & IC 555

14. Tuesday 30/07/2013

15. Thursday 01/08/2013 Voltage Regulator using IC 723.

16. Tuesday 13/08/2013

17. Thursday 22/08/2013

Three terminal voltage regulators-7805,7809&7912

18. Tuesday 20/08/2013

19. Thursday 29/08/2013 3-bit DAC using OP-Amp.

20. Tuesday 2/09/2013

ldica semester:v year:2013-14 s.no date name ... - lbrce

Documents