hp cm configuration server - support
TRANSCRIPT
HP Configuration Management
Configuration Server for the AIX; Enterprise Linux ES, AS; HP-UX; Solaris; SuSE Linux Enterprise Server; and Windows® operating systems
Software Version: 5.10
Messages Guide
Manufacturing Part Number: T3424-90134
Document Release Date: October 2007
Software Release Date: October 2007
Legal Notices
Warranty
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
The information contained herein is subject to change without notice.
Restricted Rights Legend
Confidential computer software. Valid license from HP required for possession, use orcopying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, ComputerSoftware Documentation, and Technical Data for Commercial Items are licensed to the U.S.Government under vendor's standard commercial license.
Copyright Notices
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Trademark Notices
Linux is a registered trademark of Linus Torvalds.
Microsoft®, Windows®, and Windows® XP are U.S. registered trademarks of Microsoft Corporation.
OpenLDAP is a registered trademark of the OpenLDAP Foundation.
PREBOOT EXECUTION ENVIRONMENT (PXE) SERVER Copyright © 1996-1999 Intel Corporation.
TFTP SERVER Copyright © 1983, 1993 The Regents of the University of California.
OpenLDAP Copyright 1999-2001 The OpenLDAP Foundation, Redwood City, California, USA. Portions Copyright © 1992-1996 Regents of the University of Michigan.
OpenSSL License Copyright © 1998-2001 The OpenSSLProject.
Original SSLeay License Copyright © 1995-1998 Eric Young ([email protected])
2
Documentation Updates
The title page of this document contains the following identifying information:
Software Version number, which indicates the software version. — The number before the period identifies the major release number.— The first number after the period identifies the minor release number.— The second number after the period represents the minor-minor release number.
Document Release Date, which changes each time the document is updated.
Software Release Date, which indicates the release date of this version of the software.
To check for recent updates or to verify that you are using the most recent edition, visit:
ovweb.external.hp.com/lpe/doc_serv/
You will also receive updated or new editions if you subscribe to the appropriate productsupport service. Contact your HP sales representative for details.
Table 1 indicates the changes that were made to this document since the previous edition.
Table 1 Changes in This Document
Chapter Version Change
Chapter 2 5.10 Page 91, messages 5295, 5296, 5298, and 5299 are new.
Chapter 2 5.10 Page 95, messages 5393-96, 5398, and 5399 are new.
Chapter 2 5.00 In this edition, some references to the symbolic substitution,%llu, have been revised to %llu in order to accommodate valuesgreater than 4GB in the CM Configuration Server log.
Chapter 2 5.00 Page 33, messages 0137-0141 are new.
Chapter 2 5.00 Page 33, messages 0200-0206 are new.
Chapter 2 5.00 Page 36, messages 0477-0485 are new.
Chapter 2 5.00 Page 37, messages 0554-0558 are new.
Chapter 2 5.00 Page 41, messages 0684 and 0685 have been downgraded fromError to Informational.
Chapter 2 5.00 Page 43, message 0828 has been revised as a result of productrebranding.
Chapter 2 5.00 Page 46, messages 0881-0896 are new.
Chapter 2 5.00 Page 53, message 1147 is new.
4
Chapter Version Change
Chapter 2 5.00 Page 61, messages 1660 and 1661 are new.
Chapter 2 5.00 Page 62, messages 1717 and 1718 are new.
Chapter 2 5.00 Page 62, messages 1967-1984 are new.
Chapter 2 5.00 Page 67, message 2222 is new.
Chapter 2 5.00 Page 67, messages 2302 and 2303 are new.
Chapter 2 5.00 Page 75, messages 3204-3215 are new.
Chapter 2 5.00 Page 76, messages 3300-3303 are new.
Chapter 2 5.00 Page 77, message 3614 is new.
Chapter 2 5.00 Page 78, messages 4109 and 4110 have been downgraded fromError to Warning; message 4111 was revised.
Chapter 2 5.00 Page 84, message 4304 is new.
Chapter 2 5.00 Page 86, messages 5038-5040 are new.
Chapter 2 5.00 Page 91, messages 5293 and 5294 are new.
Chapter 2 5.00 Page 98, messages 5467-5485 are new.
Chapter 2 5.00 Page 100, message 5823 is new.
Chapter 2 5.00 Page 103, message 5989 is new.
Chapter 2 5.00 Page 104, messages 6100-6199 are new.
Chapter 2 5.00 Page 108, messages 6200-6299 are new.
Chapter 2 5.00 Page 113, messages 6300-6399 are new.
Chapter 2 5.00 Page 117, messages 6400-6499 are new.
Chapter 2 5.00 Page 121, messages 6500-6599 are new.
Chapter 2 5.00 Page 125, messages 6600-6699 are new.
Chapter 2 5.00 Page 129, messages 6700-6795 are new.
Chapter 2 5.00 Page 134, messages 6800-6818 are new.
Chapter 2 5.00 Page 139, message 7069 is new.
Chapter 2 5.00 Page 140, messages 7090-7094 are new.
Chapter 2 5.00 Page 145, message 7380 is new.
5
Chapter Version Change
Chapter 2 5.00 Page 150, messages 7508-7512 are new.
Chapter 2 5.00 Page 150, messages 7900-7904 are new.
Chapter 2 5.00 Page 153, messages 8051-8090 are new.
Chapter 2 5.00 Page 157, message 8177 is new.
Chapter 2 5.00 Page 161, message 8370 is new.
Chapter 2 5.00 Page 166, message 9139 is new.
Chapter 2 5.00 Page 166, messages 9160-9165 are new.
Chapter 2 5.00 Page 166, in message 9201, references to the symbolic substitutions %2d and %3d have been revised to %2.2d and %3.3d in order to align the version-value format in the CMConfiguration Server log with the HP version-schema format.
Chapter 2 5.00 Page 170, message 9287 has been downgraded from Error to Informational.
Chapter 2 5.00 Page 171, messages 9401-9424 are new.
Chapter 2 5.00 Page 172, messages 9500-9504 are new.
6
Support
You can visit the HP Software support web site at:
www.hp.com/go/hpsoftwaresupport
This web site provides contact information and details about the products, services, and support that HP Software offers.
HP Software online software support provides customer self-solve capabilities. It provides a fast and efficient way to access interactive technical support tools needed to manage yourbusiness. As a valued support customer, you can benefit by using the support site to:
Search for knowledge documents of interest
Submit and track support cases and enhancement requests
Download software patches
Manage support contracts
Look up HP support contacts
Review information about available services
Enter into discussions with other software customers
Research and register for software training
Most of the support areas require that you register as an HP Passport user and sign in.Many also require an active support contract. To find more information about support accesslevels, go to the following URL:
http://h20230.www2.hp.com/new_access_levels.jsp
To register for an HP Passport ID, go to the following URL:
http://h20229.www2.hp.com/passport-registration.html
7
Contents
1 Introduction .......................................................................... 11 Overview..................................................................................................................................11
System Requirements ......................................................................................................11 Platform Support .......................................................................................................11
About this Guide ..............................................................................................................11 The CM Configuration Server Activity Log....................................................................12 CM Configuration Server Log Location and Settings....................................................12
MGR_LOG Section ....................................................................................................13 MGR_MESSAGE_CONTROL Section .....................................................................16 MGR_TRACE Section................................................................................................17
A Sample CM Configuration Server Activity Log..........................................................17 Startup .......................................................................................................................18 Agent Connect............................................................................................................18 Object Resolution.......................................................................................................19 End of Agent Connect................................................................................................19 Shutdown ...................................................................................................................19
Viewing the CM Configuration Server Log ....................................................................19 Reading the CM Configuration Server Log ....................................................................20
Message Number .......................................................................................................20 Time Stamp................................................................................................................21 Task Name .................................................................................................................22 Task Type...................................................................................................................23 Message Type.............................................................................................................23 Message ......................................................................................................................23
2 CM Configuration Server Messages......................................... 25 Overview..................................................................................................................................25
Numeric Ranges......................................................................................................................25
CM Configuration Server Messages......................................................................................30
9
3 CM Configuration Server Response Codes ............................. 174 Overview................................................................................................................................174
Return Codes ..................................................................................................................174 Reason Codes..................................................................................................................174
A Product Name Changes ....................................................... 178
Index ..................................................................................... 180
10 Contents
1 Introduction
OverviewThis version of the HP Configuration Management Configuration Server Messages Guide (CM Configuration Server Messages Guide) is for systems administrators who use the CM Configuration Server and want to understand the status messages that it generates.
System Requirements
Platform Support
For information about the platforms that are supported in this release, see the accompanying release notes.
About this Guide
The CM Configuration Server Messages Guide:
Describes the CM Configuration Server activity log.
Contains tables of informational, warning, and error messages, grouped numerically and by CM Configuration Server task.
Presents a look at CM Configuration Server return codes and reasoncodes.
The CM Configuration Server generates a message for each task that it performs. These messages are written to the CM Configuration Server log, or another location of your choosing, and provide inform about the status of theCM Configuration Server’s activities.
These activities include startup, the logging on of clients, and the launchingof HP Configuration Management Configuration Server Database Editor (CM Configuration Server Database Editor) sessions. As with the client logs, the tracing levels of the CM Configuration Server’s diagnostic logging can be customized. The volume and detail level of the CM Configuration Server
11
messages depend on two factors: the trace settings and logging options specified for that CM Configuration Server.
This guide will facilitate understanding the various messages; as well as assist in configuring the CM Configuration Server Settings file (the edmproffile) to maximize event logging.
The CM Configuration Server Activity Log
Why do I have a CM Configuration Server activity log?The messages that are written to the activity log can assist in troubleshooting when problems occur. Additionally, the HP TechnicalSupport group usually requests these logs when called upon for assistance in problem resolution.
What do the messages mean? The messages that the CM Configuration Server generates provide an insight into what it is doing, and when it is being done. The CMConfiguration Server reports whether everything is normal and, if not,what and where the possible cause of the problem is.
What can I do with the information?Once you can read and understand the CM Configuration Servermessages, you can take the necessary measures to correct the problemand re-establish the integrity of your computing environment.
How can I control/configure the Configuration Server log information?In the MGR_MESSAGE_CONTROL section of the edmprof file, you have the ability to specify where you would like log messages sent (logged); in the MGR_LOG section, you can determine various aspects of log behavior; and in the MGR_TRACE section, you can control diagnosticaspects of logging.
CM Configuration Server Log Location and Settings
An administrator determines where the CM Configuration Server messageslog will be written. For information on specifying a destination for the logmessages, see MGR_MESSAGE_CONTROL Section on page 16.
During the installation process, allocate space for the CM ConfigurationServer log. After the installation, specify the logging options for the log file inthe MGR_LOG section of the edmprof file. See MGR_LOG Section on page 13 for more information.
12 Chapter 1
A third section that will be beneficial is MGR_TRACE, which controls the diagnostic logging for the CM Configuration Server. The sectionMGR_TRACE Section on page 17 offers an overview of the trace options forlogging.
The MGR_XXXX sections mentioned above, as well as othersections of the edmprof file that impact the CM ConfigurationServer log are covered in greater detail in the HPConfiguration Management Configuration Server User Guide (CM Configuration Server Guide).For example, in the MGR_STARTUP section, theSHOW_VERINFO setting allows you to display versioninformation for each CM Configuration Server module at thebeginning of the log.
MGR_LOG Section
The settings in the MGR_LOG section determine where the log is located, its appearance, and its flexibility.
Table 2 MGR_LOG Settings
Setting Description
DIRECTORY The fully qualified directory to which the CM ConfigurationServer log is written.
DISABLE_NT_EVENT_LOGGING
DISABLE_SNMP_ TRAP_LOGGING
FLUSH_SIZE
MESSAGE_DATE
This parameter affects only the event logging of CM ConfigurationServer log messages. Some Windows Event log records are written without any corresponding CM Configuration Server log messages (Windows only).
This parameter affects only the trapping of CM ConfigurationServer log messages. Some SNMP traps are issued without anycorresponding CM Configuration Server log messages.
The total buffer size (in bytes) of all messages stored by the CMConfiguration Server, before it writes them to the log.
Allows insertion of the date into every line in the log. For moreinformation on including the date in the log messages, seeReading the CM Configuration Server Log on page 20.
Introduction 13
Setting Description
MESSAGE_DELIMITER
The left and right delimiters that are used for enclosing the taskname and task ID in the CM Configuration Server log messages.
The format is MESSAGE_DELIMITER=xy, where x is the leftdelimiter and y is the right. The options are: [ ], ( ), < >, and { }. The default is [ ].
MESSAGE_PREFIX
MESSAGE_WIDTH
PIPESIZE
SWITCH_TOD
THRESHOLD (or THRESHHOLD)
The three-digit, alphabetic, CM Configuration Server identifierthat precedes CM Configuration Server log message numbers. Specify any three-digit, alphabetic value. The default is NVD.
The length (in number of characters) of each message line.
The number of messages (in bytes) that the CM ConfigurationServer will collect before processing and storing them in the logbuffers.
A time-of-day specification that will, each day, automaticallytrigger log switching.
The number of lines that the log file will contain before it is dumped to another file. When the log is dumped, it will be given a temporary file name in the format of NVDMRxxx, and the CMConfiguration Server creates a new log file with a different log ID.Note: For more information, refer to the CM Configuration Server Guide.
Examples
Windows
[MGR_LOG]DIRECTORY
FLUSH_SIZE
= C:\Program Files\Hewlett-Packard\CM\ConfigurationServer\log
= 1000MESSAGE_DATE = JULIANMESSAGE_PREFIX = NVD MESSAGE_WIDTH = 256 PIPE_SIZE = 1000000THRESHHOLD = -5000000
UNIX
[MGR_LOG]DIRECTORY = opt/HP/CM/ConfigurationServer/logFLUSH_SIZE = 1000MESSAGE_DATE = GREGORIAN
14 Chapter 1
MESSAGE_PREFIX = NVD MESSAGE_WIDTH = 256 PIPE_SIZE = 1000000THRESHHOLD = -5000000
Table 3 MGR_LOG Settings Values
Setting Value asInstalled
Default Minimum
DIRECTORY N/A Program Files\Hewlett-Packard\CM\ConfigurationServer\log
andopt/HP/CM/ConfigurationServer/log
N/A
DISABLE_NT_EVENT_LOGGING
N/A NO N/A
DISABLE_SNMPTRAP_LOGGING
N/A NO N/A
FLUSH_SIZE 1000 bytes 1000 bytes 1
MESSAGE_DATE N/A N/A N/A
MESSAGE_DELIMITER N/A N/A N/A
MESSAGE_PREFIX NVD NVD N/A
MESSAGE_WIDTH 256 90 80
PIPESIZE 1000000 bytes 6553516 KB 1
SWITCH_TOD N/A N/A N/A
THRESHOLD -5000000 bytes 1000000 bytes 1
Performance and Usage Considerations
Increasing the buffer size (FLUSH_SIZE) will enhance performance, but will delay the flushing of messages to the log file.
If log messages are truncated, increase the MESSAGE_WIDTH value.
If you use the CM Configuration Server log to closely monitor systemstatus, set THRESHOLD to a positive value to create and save successive
Introduction 15
portions of the CM Configuration Server log. If disk storage is critical, set the value to a negative number to reuse the allocated log disk space.
If you are invoking a number of CM Configuration Server methods, you can control the size of the log for each method using the LOG_LIMITsetting of the MGR_METHODS section. Additionally, TASK_LOG_LIM(in the MGR_TASK_LIMIT section) controls the number of messagesprinted by the execution of each task.
When modifying parameters in this section as they relate to memory or disk utilization, take care to be certain that you do not exceed themaximum amount of memory or storage space available.
After monitoring your system’s performance, you can tune the MGR_LOGsettings for maximum efficiency. Change the settings to maximize memoryusage and for other performance considerations. For more information on theMGR_LOG settings, refer to the CM Configuration Server Guide.
The following section describes your message destination choices.
MGR_MESSAGE_CONTROL Section
The MGR_MESSAGE_CONTROL section of the edmprof file is where youspecify the selection and destination of log messages. This section provides an overview of the:
Various destinations that are available for log messages,
Configuration of, and settings for, the MGR_MESSAGE_CONTROLsection.
This section of the edmprof file specifies where log messages are to be sent and whether they are to be suppressed. MGR_MESSAGE_CONTROL allows you to specify an individual message, a series of messages, or a range ofmessages, and a set of message destinations.
The format of lines in the MGR_MESSAGE_CONTROL section is:
(Message Number(s)) = (Message Destination(s)).
The left side of the equals sign ( = ) specifies the message numbers that are affected by the command. There is also a special directive, ALL, which can beused on the left side of the equals sign to affect all messages (0001-9999). If no destination is specified after the equals sign, the message has no associated destination and is suppressed.
Table 4 on page 17 shows the destinations to which the log messages can be written.
16 Chapter 1
Table 4 MGR_MESSAGE_CONTROL Settings
Setting Destination
EVENTLOG Specify this to write log messages to the Windows Event log (Windowsonly).
LOG Specify this to write log messages to the CM Configuration Server log.
REXX Specify this to have the messages sent to a pre-determined REXX (namedMGRLOG). Important: MGRLOG is not an existing REXX, and must be created in order to use this facility. Note: The MGRLOG REXX will receive the message number and the message text as its first and second input parameters. You can then process the information in whatever manner that you choose.
SNMPTRAP Specify this to write log messages as traps to the current SNMP Manager.
USERLOG Specify this to have the messages sent to the user log. Note: You must first activate the user log feature in the MGR_USERLOGsection of the edmprof file by specifying ACTIVATE=YES.
Refer to the MGR_MESSAGE_CONTROL section in the CM Configuration Server Guide for detailed performance and usage information.
MGR_TRACE Section
The MGR_TRACE section of the edmprof file controls the diagnostic loggingfor the CM Configuration Server. All diagnostic output produced by MGR_TRACE keywords is written to the active CM Configuration Server log.
The trace settings specified in the MGR_TRACE section are invoked at CMConfiguration Server initialization and are displayed at the beginning of theCM Configuration Server log. They remain in effect until changed.
A Sample CM Configuration Server Activity Log
A properly sized and configured log will give you appropriate detail on theentire scope of CM Configuration Server operations. While individual eventsvary from one installation to another, the general flow of the CMConfiguration Server log consists of five phases:
CM Configuration Server startup
Agent connect
Introduction 17
Object resolution
End of agent connect
CM Configuration Server shutdown
The CM Configuration Server processes two types of agents:
EDM agents and
CM agents.
The agent-specific messages that are detailed in this document can apply to both types of agent, depending on the CM ConfigurationServer environment that has been established.
The next sections describe the types of messages that result from each phase.
Startup
A series of messages at the beginning of the log reflect CM ConfigurationServer startup, starting with the opening of the log. Next, the CM Configuration Server processes the parameters in the edmprof file and start various CM Configuration Server tasks. At this point, the CM ConfigurationServer is fully configured and operational, waiting for agents to connect in order to continue processing. Messages associated with this phase are: CM Configuration Server tasks starting, CM Configuration Server tasks attaching, and CM Configuration Server Settings section names and values.
Agent Connect
The agent connect occurs when an agent requests a session with the CMConfiguration Server in order to be resolved to its desired state. Each agent connect is a CM Configuration Server task. The CM Configuration Server might defer the session to a time when it is not occupied, or will connect to the agent at the time of the request. Messages associated with agent connectcan be:
“CM agent task has started.”
and...
“Connected to CM agent.”
18 Chapter 1
Object Resolution
Object resolution follows a successful agent connect. The CM ConfigurationServer processes agent objects; performs methods resolved from those objectsand creates resulting objects; transfers data to and from the agent; and creates objects that contain audit and profile information for that agent. When the agent has been returned to its desired state, the CM ConfigurationServer releases it and waits for another connect request. Messages associated with the object-resolution phase include:
“Object resolution object_name begins/ends.”
“Current path (pointing to the methods directory or resource file).”
Warnings that objects could not be found or duplicate objects exist,method identification.
Return codes for methods.
End of Agent Connect
The end of the agent connect occurs when the agent requests that its sessionwith the CM Configuration Server be terminated as a normal logoff. The message associated with end of agent connect is
“CM agent task has ended.”
Shutdown
CM Configuration Server shutdown occurs when a request to shut down the CM Configuration Server has been received. Messages associated with thisphase include:
“Shutting down CM Configuration Server.”
Messages halting communications.
Error messages that result in the CM Configuration Server endingoperations.
Viewing the CM Configuration Server Log
The CM Configuration Server log file reports on any program activity. Use a text editor to view the CM Configuration Server log. The CM ConfigurationServer log is located in the directory that was specified during installation.
Introduction 19
The Windows operating systems have GUI interfaces (program groupsand icons) for viewing the CM Configuration Server log.
Reading the CM Configuration Server Log
The logging facility generates an activity log with multiple messages. In order to read and understand the information that is presented in the log, it is helpful to be familiar with its format.
Each CM Configuration Server log message consists of six fields:
Message Number, see page 20 Time Stamp, see page 21
Task Name, see page 22 Task Type, see page 23
Message Type, see page 23 Message, see page 23
A typical log entry is displayed in the following sample from a CM Configuration Server log on a Windows server machine.
Example
NVD8349I 13:48:22 [NFYTMGR1/144] System Task--- TCP Notify <NFYTMGR1> started
The sections that follow provide more information about each of these fields.
Message Number
The message number is an alphanumeric, eight-character string that beginswith a three-letter prefix, followed by the four-digit, unique message number,and ends with a letter that indicates the severity of the message.
Three-letter Prefix
The default three-letter prefix, NVD, is customizable via theMESSAGE_PREFIX setting in the MGR_LOG section of the edmprof file.For example, if your business name is Acme Data Solutions, you could customize your log prefix to ADS. For more information, refer to the CMConfiguration Server Guide.
20 Chapter 1
Four-digit Message Number
The message number is one of several thousand numbers that has been logically grouped and individually assigned to a CM Configuration Server operations activity.
Severity Indicator
The alphabetic indicators are:
E, indicating Error messages,
Error messages are easily distinguishable because they are presented in all UPPERCASE letters.
W, indicating Warning messages, and
I, indicating Information messages.
In addition to the standard Error, Warning, and Informationmessage types, there are a few instances of Diagnostic and Always messages. These are denoted by the letters D and A,respectively, and, like the other indicators (I, E, and W), will befound in the last position of the message number. The severity ofthese messages is comparable to I and W messages, and they areintended for internal diagnostics.
Time Stamp
The time stamp (HH:MM:SS) indicates the time at which the event occurred.
Adding a Date Field
You have the option of adding the date to this field. This enables an administrator to scan the CM Configuration Server log and quickly distinguish each day’s event logging.
The date can be expressed in one of three formats: Julian, Gregorian, orInternational Standards Organization (ISO). The following examples are of February 04, 2005 in each format:
ISO (YYYYMMDD): 20050204
JULIAN (YYYYDDD): 2005035
GREGORIAN (DDMMYYYY): 04022005
Introduction 21
In the MGR_LOG section of the edmprof file, add the setting MESSAGE_DATE,and define its value as (uppercase) JULIAN, GREGORIAN, or ISO.
The following example shows a CM Configuration Server log message thatmight result if JULIAN were specified for MESSAGE_DATE. Note that thetime stamp (13:48:22) is now preceded by the Julian date (2005035).
NVD8349I 2005035 13:48:22 [NFYTMGR1/144] System Task --- TCP Notify <NFYTMGR1> started
Task Name
This is a two-part field that indicates: the task for which the activity is beinglogged or the communications address (IP address) that is being used, followed by the task ID.
[taskname (xxxxxxx) or commaddr (nnn.nnn.nnn.nnn) / taskid]
The task name can be either:
— A CM Configuration Server task, such as ZUTILMGR, or
— The communications address (IP address) of the CM ConfigurationServer, such as 204.7.83.74.
Task Name Categories
The value of the taskname field is dependent on the task that has initiatedthe message. Table 5 below lists the various categories of tasks; a set of specific functions is associated with each category.
Table 5 Task Name Categories
Agent Manager
Clock Manager
REXX Manager
TCP/IP Manager Emulator
Client
Log Manager
Task Manager
TCP/IP Notify Manager
When a message is written to the log, the taskname field will be populatedwith specific task information (as described in the preceding bullets), not thecategory. Task information includes, but is not limited to, internally assigned names, user assigned names, network host names, and IP addresses.
The task ID represents the operating system process number.
22 Chapter 1
On some operating systems, taskid is referred to as processid (PID).
Task Type
The task type indicates the type of task (such as System and Admin tasks) that initiated the message.
Message Type
Like the alphabetic indicator in the last position of the message number, the message type indicates the severity of the message. The message type indicator is a three-character field that enables an administrator to scan a CM Configuration Server log and quickly identify warning and error messages. The indicators are:
--! for Error messages,
--? for Warning messages, and
--- for Information messages.
Message
The message field contains the message text.
Typically, CM Configuration Server logs contain multiple messagesfor a single activity. Most activities that require multiple messageswill be framed with activity begins and activity ends messages.
Introduction 23
2 CM Configuration Server Messages
OverviewThis chapter is divided into the following two parts:
Numeric Ranges, below, details the numeric classifications of the various CM Configuration Server log messages, and
CM Configuration Server Messages, starting on page 30, presents a sequential list of all the messages that are generated by the CM Configuration Server logging facility.
Numeric Ranges The following table presents the numeric ranges of the CM ConfigurationServer messages. Each major area and corresponding numeric range is shaded and in bold text followed by a sub-topic and its range.
Table 6 CM Configuration Server Messages Numeric Ranges
CM Configuration Server Tasks 0001 – 0999
Message Classification
ZTOPTASK
ZTASKMGR
ZLOGMGR
ZCLKMGR
Communication
ZUTILMGR and ZSNMPUTL
ZSNMPMGR
ZTCBG and ZCVT
Numeric Range
0001 – 0099
0100 – 0199
0200 – 0299
0300 – 0399
0400 – 0499
0500 – 0599
0600 – 0699
0700 – 0749
25
Memory 1000 – 1999
Message Classification
ZMCSTMGR
ZCONMGR and ZLINECMD
ZSMTRMGR and ZSMTSMGR
Allocation, Expansion, etc.
Heap
Currently unassigned.
Currently unassigned.
Currently unassigned.
Cache
Cache
Semaphores and IPC
Currently unassigned.
ZPOOLS
Currently unassigned.
CM Agent Connection
Pipe
Compress
FTP
Miscellaneous
Currently unassigned.
Currently unassigned.
File Input/Output
Currently unassigned.
Currently unassigned.
Currently unassigned.
Numeric Range
0750 – 0799
0800 – 0899
0900 – 0999
1000 – 1099
1100 – 1199
1200 – 1299
1300 – 1399
1400 – 1499
1500 – 1599
1600 – 1699
1700 – 1799
1800 – 1899
1900 – 1999
2000 – 2099
2100 – 2199
2200 – 2207
2208 – 2249
2250 – 2299
2300 – 2399
2400 – 2499
2500 – 2599
2600 – 2699
2700 – 2799
2800 – 2899
2900 – 2999
Communications Functions 2000 – 2999
26 Chapter 2
Resolution 3000 – 3999
Message Classification
Object Resolution
User ID Errors
Object Resolution
Tree Resolution
Currently unassigned.
Metaclass Resolution
Class Resolution
Currently unassigned.
Currently unassigned.
Currently unassigned.
Security
License and Profile
Database & Y2K
Database
Currently unassigned.
Currently unassigned.
Currently unassigned.
Currently unassigned.
Currently unassigned.
Currently unassigned.
Variable Substitution
Instances
Objects and Variables
Numeric Range
3000 – 3099
3100 – 3199
3200 – 3299
3300 – 3399
3400 – 3499
3500 – 3599
3600 – 3699
3700 – 3799
3800 – 3899
3900 – 3999
4000 – 4099
4100 – 4199
4200 – 4299
4300 – 4399
4400 – 4499
4500 – 4599
4600 – 4699
4700 – 4799
4800 – 4899
4900 – 4999
5000 – 5099
5100 – 5199
5200 – 5299
Verification 4000 – 4999
Variables & Objects 5000 – 5999
CM Configuration Server Messages 27
ZADMIN 6000 – 6999
Message Classification
Object Processing
Resource
Currently unassigned.
Currently unassigned.
Currently unassigned.
PROC_API
EDMMAPID
ZATTACH
Methods
Methods
Methods
Methods
Methods
Methods
Methods
Currently unassigned.
Package Consolidation
Find
Invalid Name
Database Prefix Area
Control
DMA
Object ID
Object ID
Currently unassigned.
Numeric Range
5300 – 5399
5400 – 5499
5500 – 5599
5600 – 5699
5700 – 5799
5800 – 5899
5900 – 5999
6000 – 6099
6100 – 6199
6200 – 6299
6300 – 6399
6400 – 6499
6500 – 6599
6600 – 6699
6700 – 6799
6800 – 6899
6900 – 6999
7001 – 7080
7081 – 7099
7100 – 7199
7200 – 7299
7300 – 7399
7400 – 7499
7500 – 7599
7600 – 7699
Database 7000 – 7999
28 Chapter 2
Methods 8000 – 8999
Message Classification
Currently unassigned.
Currently unassigned.
ZVSAM
Errors
Informational
Expressions
ZNFY
ZMETHOD
ZRTRYMGR
Currently unassigned.
Currently unassigned.
Currently unassigned.
Currently unassigned.
Currently unassigned.
Multicast
General
ZSYSINFO
ZTASKLIM
I18N / UTF-8
I18N / UTF-8
Currently unassigned.
Currently unassigned.
Currently unassigned.
Currently unassigned.
Numeric Range
7700 – 7799
7800 – 7899
7900 – 7999
8000 – 8099
8100 – 8199
8200 – 8299
8300 – 8399
8400 – 8449
8450 – 8499
8500 – 8599
8600 – 8699
8700 – 8799
8800 – 8899
8900 – 8999
9000 – 9099
9100 – 9149
9150 – 9299
9300 – 9399
9400 – 9499
9500 – 9599
9600 – 9699
9700 – 9799
9800 – 9899
9900 – 9999
General 9000 – 9999
CM Configuration Server Messages 29
CM Configuration Server Messages The following table contains a sequential list of all the messages that are generated by the CM Configuration Server logging facility.
In the following table, symbolic substitution is used as follows:
<%s> = a character string, such as a file name or an object;<%4d> = a decimal number, such as an IP Port.
In the CM Configuration Server log, however, these symbolswill be replaced by the data that are applicable to the message.
Table 7 CM Configuration Server Messages
Log Message
0000-0099 ZTOPTASK
“%s”
“%s consists of the following <%d> modules:”
“CANNOT LOAD MODULE %s, ZLOADM FAILED, RC = <%08X>“
“MODULE <%s> COULD NOT BE LOADED”
“MODULE <%s> DOES NOT CONTAIN VERSION INFORMATION”
“CANNOT OPEN RESOURCE FILE FOR %s <%d>“
“CANNOT OPEN OUTPUT FILE <%s>“
“CANNOT OPEN <%s>“
“CANNOT UNLOAD MODULE <%s>, ZUNLOADM FAILED, RC = <%d>“
“NO MODULES FOUND”
“UNIDENTIFIED MODULES INCLUDED = <%d>“
“Verifying License”
“Verifying Database”
“Initializing Cache”
“MGR_ID must be specified in EDMPROF and be made up of three hex digits (A-F and 0-9).”
MessageNumber
NVD0009I
NVD0010I
NVD0011E
NVD0012E
NVD0013E
NVD0014E
NVD0015E
NVD0016E
NVD0017E
NVD0018E
NVD0019E
NVD0051I
NVD0052I
NVD0053I
NVD0054I
30 Chapter 2
MessageNumber
NVD0055I
NVD0056E
NVD0057E
NVD0058E
NVD0059E
NVD0060W
NVD0061E
NVD0064I
NVD0065I
NVD0066I
NVD0067I
NVD0068I
NVD0069E
NVD0070I
NVD0071E
NVD0072I
NVD0073I
NVD0074I
NVD0075I
NVD0076I
NVD0077I
NVD0078I
Log Message
“Current CM Configuration Server directory is <%s>“
“CM CONFIGURATION SERVER <%s> - LICENSE VERIFICATIONFAILED”
“CM CONFIGURATION SERVER WILL BE SHUTDOWN”
“DATABASE OPEN FAILED, CM CONFIGURATION SERVER CANNOTBE STARTED”
“MGR_ERROR_CONTROL DBError = SHUTDOWN, CMCONFIGURATION SERVER WILL BE SHUTDOWN”
“MGR_ERROR_CONTROL DBError = IGNORE, CM Configuration Serverinitialization continues...”
“DATABASE VERIFICATION FAILED, RC <%ld>“
“Database Verification complete, rc <%ld>“
“Attaching Clock Manager Task”
“CM Configuration Server starting, MGR_ID = <%s>“
“Attaching Task Manager Task”
“CM Configuration Server <%s> cache is not available”
“CM CONFIGURATION SERVER <%s> ERROR REATTACHING CLOCKMANAGER”
“CM Configuration Server <%s> re-attached Clock Manager”
“CM CONFIGURATION SERVER <%s> ERROR REATTACHING TASK MANAGER”
“CM Configuration Server <%s> re-attached Task Manager”
“Child with PID <%d> died...Cleaning up”
“Shutting down CM Configuration Server <%s>“
“Requesting ZTASKMGR (ID=<%d>) to shutdown”
“Terminating ZTASKMGR (ID=<%d>)”
“Terminating Task <%s> ID=<%d>“
“\n”
CM Configuration Server Messages 31
Log Message
“CM Configuration Server program <%-8.8s> preload failed”
“Preload failed for <%-8.8s>“
“%s”
“%s”
“LICENSE VERIFICATION PROBLEM, PLEASE CALL TECH-SUPPORT!*”
“CM Configuration Server is not running APF authorized. RC = <%d>“
“CM Configuration Server could not be set non-swappable. RC = <%d>“
“CM Configuration Server is running APF authorized and non-swappable”
“%-8s %-8s: %6.6d”
“License usage report for CM Configuration Server %s”
“%s”
“No license report file <%s> found”
“%s”
“License report method launch failed”
0100-0199 ZTASKMGR
“Attaching <%s>“
“INSUFFICIENT NUMBER OF SLOTS IN ATTACH TABLE - NO RESTART FOR <%s> INDEX <%d>“
“THE CM CONFIGURATION SERVER IS NOT LICENSED FOR SSL. <%s> WILL NOT START”
“ERROR ATTACHING <%s> - ERROR LOADING DLL <%s>“
“ERROR ATTACHING <%s> - DLL <%s> FUNCTION <%s> NOT FOUND”
“ERROR ATTACHING <%s> - PROGRAM <%s> UNKNOWN TOZTASKMGR”
“UNABLE TO ATTACH <%s>“
“Requesting Task <%s> ID=<%d> to shutdown”
MessageNumber
NVD0079W
NVD0080W
NVD0081E
NVD0082W
NVD0083E
NVD0084I
NVD0085I
NVD0086I
NVD0088I
NVD0089I
NVD0091I
NVD0092W
NVD0093I
NVD0094W
NVD0100I
NVD0119E
NVD0120E
NVD0121E
NVD0122E
NVD0123E
NVD0124E
NVD0130I
32 Chapter 2
Log Message
“Terminating <%s> TASKID <%d>“
“UNABLE TO RE-START <%s>“
“UNABLE TO OPEN PROFILE -- NO TASK WILL BE ATTACHED”
“NO ATTACH LIST SPECIFIED OR LIST IS EMPTY. NO TASK ATTACHED”
“<%s> PID <%i>, PPID <%i> updated to <%i>“
“Will try to restart <%s>“
“%s: UNABLE TO OPEN PROFILE -- NO SPECIFIED TASKSATTACHED”
“SSL MANAGER: MISSING SSL PARAMETERS - TERMINATINGZSSLMGR”
“SSL MANAGER: CERTIFCATE FILE NOT SPECIFIED - TERMINATINGZSSLMGR”
“SSL Manager: Private key file not specified, using certificate file”
“SSL MANAGER: PRIVATE KEY PASSWORD CANNOT BE GREATERTHAN <%d> BYTES”
“Shutting down Task Manager <%s>“
“Waiting up to %d seconds for termination of <%s> TASKID <%08X>“
0200-0299 ZLOGMGR
“----------- --- %s”
“----------- --- %s has occurred on date %s at %s”
“----------- --- running on a %1d.%2.2d.%3.3d%c Manager at service pack%s”
“----------- --- with a Manager name of %s”
“----------- --- and a Manager ID of %s”
“----------- --- %s”
“----------- --- on a %s system”
MessageNumber
NVD0131I
NVD0132E
NVD0133E
NVD0134E
NVD0135I
NVD0136I
NVD0137E
NVD0138E
NVD0139E
NVD0140W
NVD0141E
NVD0148I
NVD0149I
NVD0200I
NVD0201I
NVD0202I
NVD0203I
NVD0204I
NVD0205I
NVD0206I
CM Configuration Server Messages 33
Log Message
0400-0499 Communications
“Transaction ended”
“%s task has started”
“TCP/IP Port# <%04d>“
“TCP/IP accepting requests at address <%s> on port <%04d>“
“Received request for new connection from <%s>“
“Requesting all <%s> ZTERMTSK to shutdown”
“Requesting Task PID (%d) to shutdown”
“Terminating Method (%d) of Task PID (%d)”
“Starting Task for <%s>, active tasks <%d>“
“APIACCEPT ERROR <%s>“
“LU62 Manager accepted a new CM Agent (conv_id=<%08X%08X>)”
“HTTP Port# <%04d>“
“HTTP Manager accepting requests at address <%s> on port <%04d>“
“%s Manager Task has started”
“%s Rexx complete, rc <%d> <%s>“
“TCP SSL Port# <%04d>“
“TCP SSL Manager accepting requests at address <%s> on port <%04d>“
“TERMINATING <%s> TASKID <%d]”
“ATBALLOC ERROR - %s”
“ERROR, COULD NOT BIND SOCKET TO <%s> PORT %hd”
“ERROR, CLOSING SOCKET, RC = <%d>“
“ERROR, PORT NUMBER SPECIFIED <%s> IS INVALID.”
“CLOSE ACB ERROR FOR <%s> - <%s>“
“ERROR OF DosSetExceptionHandler(): RETURN CODE = <%d>“
“ERROR LOADING LU6.2 LIBRARY, RC = <%d>“
MessageNumber
NVD0401I
NVD0402I
NVD0403I
NVD0404I
NVD0405I
NVD0406I
NVD0407I
NVD0408I
NVD0409I
NVD0410E
NVD0411I
NVD0412I
NVD0413I
NVD0414I
NVD0415W
NVD0416I
NVD0417I
NVD0418E
NVD0419E
NVD0420E
NVD0421E
NVD0422E
NVD0423E
NVD0424E
NVD0425E
34 Chapter 2
MessageNumber
NVD0426I
NVD0427I
NVD0428E
NVD0429E
NVD0430E
NVD0431E
NVD0432I
NVD0433I
NVD0434I
NVD0437E
NVD0439I
NVD0440I
NVD0441I
NVD0442I
NVD0448I
NVD0449I
NVD0450E
NVD0460E
NVD0461E
NVD0462I
NVD0463I
NVD0464I
NVD0465I
NVD0466E
NVD0467I
Log Message
“LU6.2 Manager TP Name is <%s>“
“LU6.2 Manager LU Name is <%s>“
“ATBALLOC ERROR - <%s>“
“ZLU62MGR ENDING DUE TO ERRORS”
“APIOPEN ERROR - <%s>“
“APISTARTLOGON ERROR - <%s>“
“ZLU62MGR Simulation discontinued due to short on storage condition”
“ZLU62MGR Simulation discontinued due to task attach error”
“ZLU62MGR ending”
“APIGETLOCALHOST ERROR - <%s>“
“Logons Disabled -- closing connection”
“TASKGEN closing connection”
“Accepting New CM Agent <%s>“
“Attached ZTERMTSK <%s>“
“TASKGEN address in use - <%s>“
“TASKGEN terminating previous connection <%d>“
“TASKGEN ADDRESS STILL IN USE - <%s>“
“ERROR LOADING LIBRARY zsys_loadDynamicLibrary() OF <%s>, RC = <%d>“
“ERROR DURING zsys_getDynamicLibraryFunctionByName() OF ORDINAL <%ld> IN <%s>, RC = <%d>“
“znetwork: Dumping Sent Contents”
“znetwork: Dumping Received Contents”
“CM Agent task started”
“Connected to CM Agent”
“ERROR IN CLINIT - <%s>“
“CM Agent task has ended”
CM Configuration Server Messages 35
Log Message
“%s Manager now running with LIMIT=CLOSE option selected”
“Connection closed due to invalid IP address received: <%s>“
“TCP Manager ending”
“TCP MANAGER ENDING DUE TO ERRORS”
“SSL Manager accepting requests at address <%s> on port <%04d>“
“SSL Manager ending”
“SSL MANAGER ENDING DUE TO ERRORS”
“HTTP Manager ending”
“HTTP MANAGER ENDING DUE TO ERRORS”
“HTTPS Manager ending”
“HTTPS MANAGER ENDING DUE TO ERRORS”
“HTTPS Manager accepting requests at address <%s> on port <%04d>”
“%s: HTTPS MANAGER TERMINATING DUE TO MISSING SSL PARAMETERS”
“%s: HTTPS MANAGER TERMINATING DUE TO CERTIFICATE FIEL WAS NOT SPECIFIED”
“%s: Private key file not specified, using certificate file”
“%s Manager Task Terminating”
“Date has been changed. New date is : %s”
“%s *%.*s*”
0500-0599 ZUTILMGR and ZSNMPUTL
“CM CONFIGURATION SERVER TASKID <%d> INVALID SNMPLOGGER SEMAPHORE ID”
“CM CONFIGURATION SERVER TASKID <%d> COULD NOT LOCK SNMP LOGGER SEMAPHORE”
“CM CONFIGURATION SERVER TASKID <%d> COULD NOT UNLOCK SNMP LOGGER SEMAPHORE”
“ERROR CREATING SNMP TRAP, RC = <%d>“
MessageNumber
NVD0468I
NVD0469I
NVD0470I
NVD0471E
NVD0472I
NVD0473I
NVD0474E
NVD0475I
NVD0476E
NVD0477I
NVD0478E
NVD0479I
NVD0480E
NVD0481E
NVD0482W
NVD0483I
NVD0484I
NVD0485I
NVD0550E
NVD0551E
NVD0552E
NVD0553E
36 Chapter 2
Log Message
“CM CONFIGURATION SERVER TaskID <%d> COULD NOT ALLOCATEPDU TRAP BUFFER OF <%d> BYTES”
“CM CONFIGURATION SERVER TaskID <%d> INVALID SNMP LOGGER SEMAPHORE ID”
“CM CONFIGURATION SERVER TaskID <%d> COULD NOT LOCK SNMP LOGGER’S SEMAPHORE”
“CM CONFIGURATION SERVER TaskID <%d> COULD NOT UNLOCK SNMP LOGGER’S SEMAPHORE”
“ERROR CREATING SNMP TRAP, RC = %d”
0600-0699 ZSNMPMGR
“EDMSNMPG socket bind done, socket = <%d>“
“Sending datagram, <%d> bytes to send”
“ERROR SENDING DATAGRAM, RC = <%d>“
“Receive for response timed out after <%d> seconds”
“ERROR RECEIVING DATAGRAM, RC = <%d>“
“Received datagram, <%d> bytes received”
“TIMED OUT AFTER WAITING <%d> SECONDS FOR A RESPONSE”
“Parameter <%d> = <%s>“
“MISSING VALUE FOR SWITCH: -%c”
“-%c SWITCH CANNOT HAVE A VALUE”
“ONLY ONE OID ALLOWED WITH WALK SWITCH”
“INVALID SWITCH: <%s>“
“TOO MANY NON-SWITCH PARAMETERS: <%s>“
“INVALID INTERNAL VALUE: <%d>“
“TRACE LEVEL VALUE SPECIFIED <%s> IS INVALID.”
“HOSTNAME/IP ADDRESS OF AGENT IS REQUIRED.”
“AT LEAST ONE POSITIONAL PARAMETER (OID) IS REQUIRED”
MessageNumber
NVD0554E
NVD0555E
NVD0556E
NVD0557E
NVD0558E
NVD0600W
NVD0601W
NVD0602E
NVD0603W
NVD0604E
NVD0605W
NVD0606E
NVD0607W
NVD0608E
NVD0609E
NVD0610E
NVD0611E
NVD0612E
NVD0613E
NVD0614E
NVD0615E
NVD0616E
CM Configuration Server Messages 37
MessageNumber
NVD0617E
NVD0618I
NVD0619I
NVD0620I
NVD0621E
NVD0622I
NVD0623E
NVD0624I
NVD0625E
NVD0626I
NVD0627E
NVD0628E
NVD0629E
NVD0630E
NVD0631E
NVD0632E
NVD0633E
NVD0634I
NVD0635I
NVD0636W
NVD0637E
NVD0638E
NVD0639E
NVD0640E
NVD0641E
Log Message
“INVALID VALUE IN OID <%s>“
“Default community name \”public\” will be used.”
“Default port number (161) will be used.”
“Default timeout value (3 seconds) will be used.”
“TIMEDOUT VALUE SPECIFIED <%s> IS INVALID.”
“Default retries allowed value of 3 will be used.”
“RETRIES ALLOWED VALUE SPECIFIED <%s> IS INVALID.”
“Default SNMP version of 1 will be used.”
“SNMP VERSION SPECIFIED <%s> IS INVALID.”
“Default request id of 0 will be used.”
“REQUEST ID SPECIFIED <%s> IS INVALID.”
“ERROR BUILDING SNMP GET REQUEST, RC = <%d>“
“RESPONSE HAS WRONG PDU TYPE = <%02X>“
“RESPONSE WITH ERROR INDEX = <%d>, STATUS = <%d> = <%s>“
“OID RECEIVED HAS TOO MANY IDS”
“ERROR, OCTET STRING TOO LONG”
“ERROR, UNSUPPORTED DATA TYPE RECEIVED”
“%s - Snapping <%p> for length <0x%08x=%ld>“
“<%08X>“
“EDMSNMPS socket bind done, socket = <%d>“
“+%c SWITCH CANNOT HAVE A VALUE”
“TOO MANY OID PARAMETERS: <%s>“
“TOO MANY TYPE PARAMETERS: <%s>“
“TOO MANY VALUE PARAMETERS: <%s>“
“AT LEAST THREE POSITIONAL PARAMETERS (OID, type, value) AREREQUIRED”
38 Chapter 2
MessageNumber
NVD0642E
NVD0643E
NVD0644E
NVD0645E
NVD0646E
NVD0647E
NVD0648E
NVD0649E
NVD0650E
NVD0651E
NVD0652E
NVD0653I
NVD0654E
NVD0655E
NVD0656E
NVD0657E
NVD0658E
NVD0659E
NVD0660E
NVD0661E
NVD0662E
Log Message
“MISSING TYPE/VALUE PARAMETER TO MATCH OID POSITIONAL PARAMETER.”
“MISSING VALUE PARAMETER TO MATCH OID POSITIONAL PARAMETER.”
“TYPE <%s> IS NOT SUPPORTED BY THIS PROGRAM”
“INVALID TYPE <%s> SPECIFIED FOR OID <%s>“
“INVALID CHARACTER FOR TYPE <%s> IN VALUE <%s>“
“INVALID IP ADDRESS IN VALUE<%s>“
“INVALID IP ADDRESS IN VALUE<%s> - MISSING DOT(s)”
“INVALID VALUE IN OID VALUE<%s>“
“VALUE FOR TYPE NULL MUST BE SPECIFIED AS 0”
“INTERNAL ERROR, INVALID EDIT TYPE ENCOUNTERED”
“ERROR BUILDING SNMP SET REQUEST, RC = <%d>“
“SNMP Agent Task has started”
“ERROR IN DosSetExceptionHandler : RETURN CODE = <%d>“
“\”RUN_AS_EXTENSION = YES\” IS VALID ONLY WHEN RUNNING UNDER NT”
“ERROR CREATING NAMED PIPE TO SNMP EXTENSION DLL, RC = <%d>“
“SNMP EXTENSION DLL, RC = <%d>“
“ERROR READING FROM SNMP EXTENSION DLL NAMED PIPE, RC = <%d>“
“MESSAGE FROM DLL: reqType = <%d>, index = <%d>“
“RECEIVED INCORRECT VERSION NUMBER <%d> FROM SNMPEXTENSION DLL”
“MESSAGE FROM SNMP EXTENSION DLL NAMED PIPE IS TOO SHORT, READ <%d> BYTES”
“ERROR WRITING TO SNMP EXTENSION DLL NAMED PIPE, RC = <%d>“
CM Configuration Server Messages 39
MessageNumber
NVD0663E
NVD0664E
NVD0665E
NVD0666E
NVD0667E
NVD0668E
NVD0669E
NVD0670E
NVD0671E
NVD0672E
NVD0673E
NVD0674E
NVD0675I
NVD0676I
NVD0677E
NVD0678E
NVD0679E
NVD0680E
NVD0681E
NVD0682E
NVD0683E
Log Message
“ERROR FLUSHING SNMP EXTENSION DLL NAMED PIPE, RC = <%d>“
“ERROR DISCONNECTING SNMP EXTENSION DLL NAMED PIPE, RC = <%d>“
“ERROR DISCONNECTING FROM SNMP EXTENSION DLL NAMED PIPE AFTER ERROR, RC = <%d>“
“ERROR ESTABLISHING START UP TIME”
“SNMP COMMUNITY NAME NOT SPECIFIED IN EDMPROF”
“ERROR FORMATTING SNMP_MANAGER_IP_ADDR”
“ERROR FORMATTING SNMP_MANAGER_IP_ADDR2”
“ERROR FORMATTING SNMP_MANAGER_IP_ADDR3”
“ERROR, COULD NOT BIND SNMP SOCKET TO <%s%s> PORT <%hd>“
“ERROR, COULD NOT ALLOCATE SNMPZREQ BUFFER”
“ERROR SENDING SNMP COLDSTART TRAP, RC = <%d>“
“ERROR SENDING SNMP AUTH_FAILURE TRAP, RC = <%d>“
“Received SNMP request with invalid set community name = <%s>“
“Received SNMP request with invalid community name = <%s>“
“SNMP ERROR SUMMARY FOLLOWS AS \”ERROR NUMBER - ERRORCOUNT\”:”
“1-%04lu 2-%04lu 3-%04lu 4-%04lu 5-%04lu 6-%04lu 7-%04lu 8-%04lu9-%04lu 10-%04lu”
“11-%04lu 12-%04lu 13-%04lu 14-%04lu 15-%04lu 16-%04lu 17-%04lu 18-%04lu 19-%04lu 20-%04lu”
“21-%04lu 22-%04lu 23-%04lu 24-%04lu 25-%04lu 26-%04lu 27-%04lu 28-%04lu 29-%04lu 30-%04lu”
“31-%04lu 32-%04lu 33-%04lu 34-%04lu 35-%04lu 36-%04lu”
“ERROR CREATING NAMED PIPE, RC = <%d>“
“ERROR CONNECTING TO NAMED PIPE, RC = <%d>“
40 Chapter 2
Log Message
“Shutting down CM Configuration Server at request of SNMP set command”
“Switched CM Configuration Server logs at request of SNMP set command”
“SNMP logging enabled by SNMP request”
“SNMP logging disabled by SNMP request”
“Event logging for critical log messages enabled by SNMP request”
“Event logging for critical log messages disabled by SNMP request”
“Command received from SNMP Manager: <%s>“
“Turning ADMIN trace off at request of SNMP set command”
“Turning ADMIN trace on at request of SNMP set command”
“ZERROR TRAPPING SEVERITY SET TO <%lu> BY SNMP REQUEST”
“%s SET TO <%lu> BY SNMP REQUEST”
“Enabling all logons to the CM Configuration Server at request of SNMP set command”
“Disabling all logons to the CM Configuration Server at request of SNMP set command”
“Turning <%s> all CM Configuration Server tracing at request of SNMP set command”
“Turning <%s> trace <%s> at request of SNMP set command”
“SNMP Event: <%s>“
0700-0749 ZCVT and ZTCBG
“ERROR, COULD NOT FIND ZCVT OF CM CONFIGURATION SERVERTASK <%ld>“
“ERROR, COULD NOT FIND ZTCBG OF CM CONFIGURATION SERVERTASK <%ld>“
0750-0799 ZMCSTMGR
“Multicast Manager Task has started”
“COULD NOT CREATE MULTICAST WORK DIRECTORY”
MessageNumber
NVD0684I
NVD0685I
NVD0686I
NVD0687I
NVD0688I
NVD0689I
NVD0690I
NVD0691I
NVD0692I
NVD0693E
NVD0694E
NVD0695I
NVD0696I
NVD0697I
NVD0698I
NVD0699I
NVD0701E
NVD0702E
NVD0750I
NVD0751E
CM Configuration Server Messages 41
Log Message
“UNABLE TO INITIALIZE MULTICAST SEGMENT”
“ERROR ADDING NEW MULTICAST ENTRY <%s>“
“ERROR ADDING QUEUE ENTRY <%8.8s>“
“FAILED ATTACHING ZMCASTER - RC = <%d>“
“Started multicast task for <%s>“
“Requesting all multicast tasks to shutdown”
“MULTICAST TASK HAS NOT BEEN ENABLED.”
“ERROR LOADING MULTICAST DATA FROM ZMASTER”
“ERROR WRITING TO MULTI CAST QUEUE RC <%d>“
“DOMAIN VARIABLE <%8.8s> NOT FOUND FOR MULTICAST INSTANCE”
“CLASS VARIABLE <%8.8s> NOT FOUND FOR MULTICASTINSTANCE”
“INSTANCE VARIABLE <%8.8s> NOT FOUND FOR MULTICASTINSTANCE”
“INVALID DOMAIN NAME FOR MULTICAST”
“INVALID CLASS NAME FOR MULTICAST”
“INVALID INSTANCE NAME FOR MULTICAST”
“MISSING <%s> VARIABLE FOR MULTICAST”
“INVALID <%s> FOR MULTICAST”
0800-0899 ZCONMGR and ZLINECMD
“CM CONFIGURATION SERVER - INVALID COMMAND: <%s>“
“INVALID REFRESH COMMAND: <%s>“
“REFRESH COMMAND CANNOT DETERMINE PARMLIB DATASETNAME, RC <%d>“
“INVALID PARMLIB MEMBER NAME IN REFRESH COMMAND <%s>“
“REFRESH COMMAND CANNOT OPEN <%s>“
MessageNumber
NVD0752E
NVD0753E
NVD0754E
NVD0755E
NVD0756I
NVD0757I
NVD0758E
NVD0759E
NVD0760E
NVD0761E
NVD0762E
NVD0763E
NVD0764E
NVD0765E
NVD0766E
NVD0767E
NVD0768E
NVD0801E
NVD0802E
NVD0803E
NVD0804E
NVD0805E
42 Chapter 2
MessageNumber
NVD0806E
NVD0807E
NVD0808E
NVD0809E
NVD0810E
NVD0811I
NVD0812E
NVD0813E
NVD0814E
NVD0816E
NVD0817E
NVD0818E
NVD0819E
NVD0820E
NVD0821I
NVD0823E
NVD0824E
NVD0825I
NVD0826I
NVD0827I
NVD0828I
NVD0829I
NVD0830I
NVD0831E
NVD0832E
Log Message
“REFRESH COMMAND CANNOT READ <%s>“
“REFRESH FAILED TO PROCESS MGR_TRACE in <%s>“
“REFRESH FAILED TO PROCESS MGR_MESSAGE_CONTROL in <%s>“
“REFRESH FAILED TO PROCESS MGR_POOLS - GLOBAL HEAP NOT FOUND “
“REFRESH FAILED TO PROCESS MGR_POOLS in <%s>“
“Refresh from <%s> completed successfully”
“INVALID QUEUE COMMAND: <%s>“
“INVALID QUEUE NAME IN COMMAND: <%s>“
“NO QUEUE NAME IN COMMAND: <%s>“
“NO REXX COMMAND NAME IN: <%s>“
“NO IP ADDRESS IN: <%s>“
“NO PORT NUMBER IN: <%s>“
“NO USERID IN: <%s>“
“NOTIFY NOT SUPPORTED BY MODIFY COMMAND”
“Command Accepted: <%s>“
“INVALID MODIFY COMMAND: <%s>“
“INVALID DISPLAY SUBCOMMAND IN: <%s>“
“Display Active:”
“Heaps To_Snd Sent Rslved CurrObj Method State”
“%5hd %6hd %6hd %6hd %8s %8s %s”
“No active CM agent connects found”
“Display Status:”
“%5d - %s”
“INVALID POOL SUBCOMMAND IN: <%s>“
“POOL STATS: COMMAND FAILED - ZCVT NOT FOUND”
CM Configuration Server Messages 43
MessageNumber
NVD0833E
NVD0834I
NVD0835E
NVD0836I
NVD0837I
NVD0838I
NVD0839E
NVD0840E
NVD0841I
NVD0842E
NVD0843E
NVD0844I
NVD0845I
NVD0846I
NVD0847E
NVD0848E
NVD0849I
NVD0850E
NVD0851E
NVD0852E
NVD0853I
NVD0854E
NVD0855E
Log Message
“POOL STATS: COMMAND FAILED - GLOBAL HEAP NOT INITIALIZED”
“POOL STATS: - None, Heap is disabled”
“POOL STATS: NO TASK FOUND WITH NAME <%s>“
“POOL STATS for <%s>:”
“Size Number Waste InUse HighWM Allocs EmptyWaste”
“%7d%c %6d %3d %6lu %6lu %11lu %11lu %11lu”
“POOL MISSES: COMMAND FAILED - ZCVT NOT FOUND”
“POOL MISSES: COMMAND FAILED - GLOBAL HEAP NOTINITIALIZED”
“POOL MISSES: - None, Heap is disabled”
“POOL MISSES: - ERROR, TASK NAME WAS NOT SPECIFIED”
“POOL MISSES: NO TASK FOUND WITH NAME <%s>“
“POOL MISSES for <%s>:”
“%9.9d %8.8s/%d”
“Misses table is empty”
“POOL DISABLE: COMMAND FAILED - ZCVT NOT FOUND”
“POOL DISABLE: COMMAND FAILED - GLOBAL HEAP NOTINITIALIZED”
“POOL DISABLE: - None, Heap is disabled”
“POOL DISABLE: - NO POOL SIZE IN COMMAND”
“POOL DISABLE: - POOL SIZE IS NON-NUMERIC”
“POOL DISABLE: - POOL SIZE <%D> NOT DISABLED \n”
“POOL DISABLE: Command successful - Pool size <%d> disabled”
“POOL ENABLE: COMMAND FAILED - ZCVT NOT FOUND”
“POOL ENABLE: COMMAND FAILED - GLOBAL HEAP NOT INITIALIZED”
44 Chapter 2
MessageNumber
NVD0856E
NVD0857E
NVD0858E
NVD0859E
NVD0860I
NVD0861E
NVD0862E
NVD0863E
NVD0864E
NVD0865E
NVD0866E
NVD0867I
NVD0868E
NVD0869E
NVD0870E
NVD0871E
NVD0872E
NVD0873E
NVD0874E
NVD0875E
NVD0876E
NVD0877E
Log Message
“POOL ENABLE: - ERROR, HEAP IS DISABLED”
“POOL ENABLE: - NO POOL SIZE IN COMMAND”
“POOL ENABLE: - POOL SIZE IS NON-NUMERIC”
“POOL ENABLE: - COMMAND FAILED - POOL SIZE <%d> NOTENABLED”
“POOL ENABLE: Command successful - Pool size <%d> enabled”
“POOL CLEAR COUNTERS: COMMAND FAILED - ZCVT NOT FOUND”
“POOL CLEAR COUNTERS: COMMAND FAILED - GLOBAL HEAP NOT INITIALIZED”
“POOL CLEAR COUNTERS: - ERROR, HEAP IS DISABLED”
“POOL CLEAR COUNTERS: - NO POOL SIZE IN COMMAND”
“POOL CLEAR COUNTERS: - POOL SIZE IS NON-NUMERIC”
“POOL CLEAR COUNTERS: - COMMAND FAILED - COUNTERS FORPOOL SIZE <%d> NOT CLEARED”
“POOL CLEAR COUNTERS: Command successful - Counters for pool size <%d> cleared”
“POOL ADJUST: COMMAND FAILED - ZCVT NOT FOUND”
“POOL ADJUST: COMMAND FAILED - GLOBAL HEAP NOT INITIALIZED”
“POOL ADJUST: - NO POOL SIZE IN COMMAND”
“POOL ADJUST: - NO NUMBER OF ELEMENTS IN COMMAND”
“POOL ADJUST: - POOL SIZE IS NON-NUMERIC”
“POOL ADJUST: - POOL SIZE IS INVALID”
“POOL ADJUST: - NUMBER OF ELEMENTS IS NON-NUMERIC”
“POOL ADJUST: - NUMBER OF ELEMENTS IS INVALID”
“POOL ADJUST: - PERCENT WASTE TOLERATED IS NON-NUMERIC”
“POOL ADJUST: - PERCENT WASTE TOLERATED <%lu> IS NON-NUMERIC”
CM Configuration Server Messages 45
Log Message
“POOL ADJUST: - COMMAND FAILED - POOL SIZE <%lu> NOT ADJUSTED “
“POOL ADJUST: - Command successful - Pool size <%lu> adjusted “
“OTHER: %lu allocs, %lu bytes, %lu largest, %lu expansion”
“Console Manager received command to shutdown everything”
“Console Manager ending, shutdown detected”
“Console Manager received the following MVS modify command:”
“===> %s”
“%s: Received command longer than %d”
“Received command to flush the log”
“Received command to switch the log”
“Received command to shutdown everything”
“Received a display command”
“Received a pool command”
“Received command to log version information”
“Received command to queue a request”
“Received command to refresh trace options”
“Debug command, tasklim = %i”
“Debug command, dumping ztcbg number %i”
“%s *%.*s*”
0900-0999 ZSMTRMGR and ZSMTSMGR
“%s task has started”
“ERROR LOADING TCPIP LIBRARY, RC = <%d>“
“SMTP Port# <%04d>“
“ATBALLOC ERROR - <%s>“
“APIOPEN ERROR - <%s>“
MessageNumber
NVD0878E
NVD0879I
NVD0880I
NVD0881I
NVD0882I
NVD0883I
NVD0884I
NVD0885I
NVD0886I
NVD0887I
NVD0888I
NVD0889I
NVD0890I
NVD0891I
NVD0892I
NVD0893I
NVD0894I
NVD0895I
NVD0896I
NVD0901I
NVD0902E
NVD0903I
NVD0904E
NVD0905E
46 Chapter 2
MessageNumber
NVD0906E
NVD0907E
NVD0908I
NVD0909I
NVD0910I
NVD0911I
NVD0912I
NVD0913E
NVD0914E
NVD0915E
NVD0916E
NVD0917I
NVD0918E
NVD0919E
NVD0920E
NVD0921E
NVD0922E
NVD0923I
NVD0924I
NVD0925E
NVD0926E
NVD0927E
NVD0928E
NVD0929E
NVD0930I
NVD0931E
Log Message
“APIACCEPT ERROR - <%s>“
“ERROR ZATTACH INTERNAL FAILED - RC = <%d>“
“Requesting all SMTP ZSMTPRCVs to shutdown”
“Terminating Method <%d> of CM Configuration Server Task <%d>“
“Requesting CM Configuration Server Task <%d> to shutdown”
“Terminating CM Configuration Server Task <%d>“
“SMTP Send Task has started”
“COULD NOT VALIDATE SPOOL DIRECTORY”
“MESSAGE QUEUE WAS NOT INITIALIZED, UNABLE TO CONTINUE”
“ERROR CREATING MAIL SEMAPHORE”
“ERROR CREATING MAIL EVENT SEMAPHORE”
“Requesting SMTP Spooler & Queuer to shutdown”
“ERROR GENERATING MAIL_ID”
“ERROR LOCKING MAIL SEMAPHORE”
“ERROR SPOOLING MAIL TO <%s>“
“ERROR UNLOCKING MAIL SEMAPHORE”
“ERROR CREATING MAIL EVENT SEMAPHORE”
“Mail cannot be spooled <%s>“
“Cannot open mail queue file <%s>“
“MISSING MAIL MUTEX SEMAPHORE”
“MISSING MAIL EVENT SEMAPHORE”
“SPOOL CONTAINS AN INVALID FILE <%s>“
“ERROR OPENING SPOOL FILE <%s>“
“MAIL TO <%s> IS CORRUPTED”
“Mail spooler task started”
“ERROR OPENING MAIL SEMAPHORE”
CM Configuration Server Messages 47
Log Message
“ERROR OPENING MAIL EVENT SEMAPHORE”
“Mail Spooler task has ended”
“INIT_ERROR : <%d> <%s> “
“OPEN_ERROR : <%d> <%s> “
“CONNECTION REFUSED <%s>“
“HELO ERROR <%s>“
“MAIL FROM ERROR <%s>“
“RCPT TO ERROR <%s>“
“MAIL DATA ERROR <%s>“
“Attachment file: <%s> not found”
“Routing mail via: <%s> “
“INCORRECT SEQUENCE OF COMMANDS”
“INVALID FORWARD PATH <%s>“
“INVALID FORWARD PATH LENGTH <%s>“
“Message Relaying not enabled <%s>“
“CANNOT ACCEPT MAIL FOR <%s>“
“ERROR GENERATING TEMPORARY FILE NAME”
“ERROR CREATING DIRECTORY <%s>“
“ERROR CREATING FILE <%s>“
“e-mail received in <%s>“
1000-1099 Allocation and Expansion
“ERROR, UNABLE TO ALLOCATE MEMORY FOR OBJECT<%s>“
“ERROR, UNABLE TO ALLOCATE STORAGE FOR BUFFER”
“ERROR, UNABLE TO REALLOCATE MEMORY”
“ERROR, UNABLE TO EXPAND”
“ERROR, UNABLE TO ALLOCATE STORAGE FOR TEMPLATE”
MessageNumber
NVD0932E
NVD0933I
NVD0934E
NVD0935E
NVD0936E
NVD0937E
NVD0938E
NVD0939E
NVD0940E
NVD0941I
NVD0942I
NVD0943E
NVD0944E
NVD0945E
NVD0946W
NVD0947E
NVD0948E
NVD0949E
NVD0950E
NVD0951I
NVD1001E
NVD1002E
NVD1003E
NVD1004E
NVD1005E
48 Chapter 2
MessageNumber
NVD1006E
NVD1007E
NVD1008E
NVD1009E
NVD1010E
NVD1011E
NVD1012E
NVD1013E
NVD1014E
NVD1015I
NVD1016I
NVD1017E
NVD1018IE
NVD1019E
NVD1020E
NVD1021E
NVD1022I
NVD1023I
NVD1024I
NVD1025I
NVD1026E
NVD1027E
NVD1028E
NVD1029I
Log Message
“ERROR, UNABLE TO ALLOCATE STORAGE FOR HEAP <%lu>“
“ERROR, UNABLE TO ALLOCATE STORAGE FOR INSTANCE<%s.%s.%s.%s>“
“ERROR, UNABLE TO ALLOCATE STORAGE FOR BASE INSTANCE<%s.%s.%s>“
“ERROR, UNABLE TO ALLOCATE STORAGE FOR CLASS <%s.%s.%s>“
“ERROR, UNABLE TO EXPAND TEMPLATE”
“ERROR, UNABLE TO ALLOCATE MEMORY FOR <%s>“
“ERROR, CANNOT CREATE A VALID POINTER”
“ERROR, UNABLE TO ALLOCATE <%d> BYTES OF MEMORY FOR <%s>“
“ERROR OBTAINING SHARED MEMORY COPY”
“Expand DIRECTORY from <%d> to <%d>“
“Directory Old: <%p> New: <%p>“
“ERROR ALLOCATING STORAGE FOR <%d> BYTES”
“M_FREE=<%p> in <%s-%d> num_bytes is <%d>“
“INSUFFICIENT MEMORY-SIZE <%s %d %d>“
“MACHINE MIGHT BE OUT OF SWAP SPACE”
“RLIMIT_DATA (HEAP) (SOFT) <%10.10d> (HARD) <%10.10d>“
“M_MALLOC=<%p> from <%s-%d> num_bytes is <%d>“
“Increasing storage size from <%d> to <%d> bytes”
“Last block of record length <%d> bytes”
“Received record of length <%d> bytes”
“VARIABLE SERVER - STORAGE UNAVAILABLE”
“INSUFFICIENT BUFFER SIZE”
“ERROR IN LOCATING HEAP <%s>“
“Initial heap index allocated <%lu> bytes @ <%08x>“
CM Configuration Server Messages 49
MessageNumber
NVD1030I
NVD1031I
NVD1032I
NVD1033I
NVD1034I
NVD1035I
NVD1036I
NVD1037I
NVD1038E
NVD1039E
NVD1040W
NVD1041W
NVD1042I
NVD1043I
NVD1044I
NVD1045I
NVD1046E
NVD1047E
NVD1048I
NVD1049E
NVD1050E
NVD1051I
NVD1052I
NVD1053E
Log Message
“Expanded heap index allocated <%lu> bytes @ <%08x>“
“Old heap index @ <%08x> freed”
“Heap allocated <%lu> bytes @ <%08x>“
“Heap storage @ <%08x> freed”
“Heap index storage @ <%08x> freed”
“%s: index @ <%08x>, index_i <%ld> @ <%08x>, index_j <%ld> @ <%08x>“
“%s: index_i->zheapno <%ld>, index_i->zhpaddr <%08x>“
“Heap index allocated <%ld> bytes @ <%08x>“
“ERROR ALLOCATING NEW INDEX STORAGE FOR OBJECT <%s>“
“ERROR ALLOCATING EXPANDED HEAP STORAGE FOR OBJECT<%s>“
“Below 16M storage limit exceeded, limit = <%lu>“
“Above 16M storage limit exceeded, limit = <%lu>“
“Total available storage < 16M is <%lu>, largest fragment is <%lu>“
“Total available storage > 16M is <%lu>, largest fragment is <%lu>“
“Total available storage is <%lu>, largest fragment is <%lu>“
“Allocating index cache shared memory <%lu> bytes”
“ERROR CREATING INDEX CACHE SHARED MEMORY”
“ERROR ALLOCATING INDEX CACHE SHARED MEMORY”
“Allocating index cache memory; fixed area=<%lu> bytes;entry_table=<%lu> bytes”
“ERROR UNABLE TO ALLOCATE MEMORY FOR PROCESSINGTEMPLATE”
“ERROR ALLOCATING STORAGE MEMORY FOR QUEUE ENTRY”
“Total available storage > 16M is <%llu>, largest fragment is <%llu>, credit = <%llu>“
“Total available storage is <%llu>, total is <%llu>, credit = <%llu>“
“BELOW 16MB STORAGE LIMIT EXCEEDED, LIMIT = <%llu>“
50 Chapter 2
Log Message
“ABOVE 16MB STORAGE LIMIT EXCEEDED, LIMIT = <%llu>“
“STORAGE LIMIT EXCEEDED, LIMIT = <%llu>“
“SHORT ON STORAGE, NEEDED <%llu> BYTES ABOVE THE LINE BUT HAVE ONLY <%llu-%llu = %llu>“
“SHORT ON STORAGE, NEEDED <%llu> BYTES BUT HAVE ONLY <%llu-%llu = %llu>“
“SHORT ON STORAGE, NEEDED <%llu> CONTIGUOUS BYTES ABOVETHE LINE BUT HAVE ONLY <%llu>“
“SHORT ON STORAGE, NEEDED <%llu> CONTIGUOUS BYTES BUTHAVE ONLY <%llu>“
“ERROR, CALL TO zsys_querySystemMemory() FAILED”
“ERROR COPYING TEMPLATE ENTRIES”
“#ENTRIES <%d> #COPIED <%d> “
“Total number of local memory allocations: <%i>“
“Total number of local memory frees: <%i>”
“Total number of local buffers reuse: <%i>”
“Number of template memory reuse: <%i>”
“Number of base instance memory reuse: <%i>”
“Number of instance memory reuse: <%i>”
“Max size of local memory allocated: <%i>”
“OBJECT <%0.8s> TEMPLATE DIRECTORY EXPANSION SIZE <%lu> IS GREATER THAN ALLOWED MAX SIZE <%lu>”
“Unable to create area for call to ZLOGSWCH/ZLOGWRAP REXX, skipping REXX call”
“EXCEPTION <%s> IN <%s> AT <%X>”
“ACCESS VIOLATION: ATTEMPTED TO %s <%X>”
1100-1199 Heap
“ERROR, EXPANSION ERROR FOR <%s.%s>”
MessageNumber
NVD1054E
NVD1055E
NVD1056E
NVD1057E
NVD1058E
NVD1059E
NVD1060E
NVD1061E
NVD1062E
NVD1063I
NVD1064I
NVD1065I
NVD1066I
NVD1067I
NVD1068I
NVD1069I
NVD1070E
NVD1071W
NVD1072E
NVD1073E
NVD1100E
CM Configuration Server Messages 51
MessageNumber
NVD1101E
NVD1102E
NVD1103E
NVD1104E
NVD1105I
NVD1106I
NVD1107E
NVD1108E
NVD1109E
NVD1110E
NVD1111I
NVD1112I
NVD1113I
NVD1114E
NVD1115E
NVD1116E
NVD1117E
NVD1118E
NVD1119E
NVD1120I
NVD1121E
NVD1122I
NVD1123I
NVD1124I
Log Message
“ERROR LOCATING HEAP <%lu>”
“ERROR, HEAP <%lu> NOT FOUND FOR <%s>”
“ERROR, HEAP SIZE <%d> EXCEEDS ALLOCATED BUFFER SPACE<%d>“
“ERROR INITIALIZING HEAPS”
“<%s> Heap queue allocated at <%p>“
“<%8.8s> Heap queue allocated at <%p>“
“ERROR <%s> HEAP <%d>“
“ERROR INITIALIZING HEAP FOR OBJECT <%s>“
“ERROR ALLOCATING HEAP FOR OBJECT”
“ERROR SORTHEAP - VARIABLE <%s> NOT FOUND”
“Heap Sent Before Template (O) <%8.8s> (T) <%8.8s> (S) <%d>“
“Heap Length <%d> bytes”
“Heap <%lu>“
“ERROR, TEMPLATE VARIABLE <%*.0s> DATA OUTSIDE OF HEAP BUFFER”
“ERROR, HEAP SIZE <%d> LESS THAN TEMPLATE OFFSET <%d>, LENGTH <%d>“
“ERROR SETTING OBJECT QUEUE <%s>“
“ERROR SORTHEAP - PATCHALL NOT FOUND”
“ERROR ALLOCATING STORAGE FOR HEAP”
“ERROR INVALID OBJECT NAME”
“Heap <%lu> @ <%08x> added to index @ <%08x> offset <%08x>“
“ERROR HEAP SIZE <%d> GREATER THAN MAX HEAP SIZEALLOWED <%lu>“
“Adding heap <%lu> @ <%08x> to multi-heap index”
“Heap <%lu> copied from @ <%08x> to @ <%08x>“
“Heap <%d> not found in multi-heap index”
52 Chapter 2
MessageNumber
NVD1125I
NVD1126I
NVD1127E
NVD1128E
NVD1129E
NVD1130E
NVD1131I
NVD1132I
NVD1133E
NVD1134I
NVD1135E
NVD1136E
NVD1137E
NVD1138I
NVD1139I
NVD1140E
NVD1141I
NVD1142E
NVD1143E
NVD1144E
NVD1145E
NVD1146E
NVD1147I
Log Message
“%s: ZPCB @ <%08x>, sort list @ <%08x>, sort order <%ld>“
“%s: varentry @ <%08x>, name <%8.8s>, dspl <%04x>, len <%04x>“
“ERROR, HEAP NUMBER <%d> NOT FOUND IN OBJECT <%s>“
“ERROR, NO HEAP DATA POINTER FOR HEAP NUMBER <%lu> OBJECT <%s>“
“ERROR, NO HEAPS ALLOCATED FOR OBJECT <%s>“
“ERROR, HEAP EXPANSION NOT NEEDED FOR OBJECT <%s>“
“%s returns heap <%lu> @ <%08x>“
“%s returns heap queue @ <%08x>“
“ERROR RE-INITIALIZING HEAP FOR <%s> WITH CONFLICTINGSIZES OLD=<%d> NEW=<%d>“
“Heap queue for object <%s> located @ <%08x>“
“HEAP NUMBER <%lu>, CANNOT EXCEED <%d> FOR OBJECT <%s>“
“%s REQUESTED HEAP NUMBER IS ZERO AND CURRENT HEAP IS UNDEFINED”
“SORTHEAP - OBJECT NOT FOUND <%s>“
“Requested heap number (%lu) higher than current last heap: (%lu)”
“Object heap will be...: ( %lu)”
“INVALID HEAP NUMBER PASSED =<%lu>, MAXIMUM IS <%lu>“
“Heap number <%lu> invalid for <%s>; maximum heaps=<%lu>“
“ERROR ALLOCATING MEMORY FOR PROCESSING THE HEAP”
“INSTANCE NUMBER > MAXHEAP + 1 %s %s %lu (Max) %lu”
“ERROR LOCATING HEAP FOR <%s>“
“ERROR IN MALLOC OF <%s>“
“ERROR ALLOCATING HEAP <%s>“
“s *%.*s*”
CM Configuration Server Messages 53
Log Message
1500-1599 Cache
“Loading Cache...”
“ERROR INITIALIZING CACHE IPC FOR CM AGENT”
“ERROR INITIALIZING CACHE FOR CM AGENT TASK”
“INSUFFICIENT MEMORY FOR CACHE”
“ERROR ON GETMAIN FOR CACHE MEMORY SEGMENT <%d>“
“ERROR ON CREATING CACHE SHARED MEMORY SEGMENT <%d>“
“ERROR ON ATTACHING CACHE SHARED MEMORY <%d> (PARENT)”
“ERROR ON ATTACHING CACHE SHARED MEMORY <%d> (CHILD)”
“ERROR ON DETACHING CACHE SHARED MEMORY SEGMENT <%d> <%d> (PARENT)”
“ERROR ON REMOVING CACHE SHARED MEMORY SEGMENT <%d> (PARENT)”
“ERROR ON DETACHING CACHE SHARED MEMORY SEGMENT <%d> <%d> (CHILD)”
“Cache Page <%d> Free Space <%d> Reclaimed <%d>“
“Free block <%d> overlaps with <%d>“
“ERROR ON REMOVING INDEX CACHE ENTRY FOR <%s.%s.%s.%s>“
“Invalidated cache entry for <%s.%s.%s.%s>“
“Cached size <%d> differs from new file size <%d>“
“CACHED SIZE <%d> DIFFERS FROM CLASS HEAP LENGTH <%d> OFFSET <%d>“
“CACHE NOT UPDATED FOR INSTANCE <%s.%s.%s.%s>“
“Could not find <%s.%s.%s> in content cache”
“ERROR ON LOCKING <%s.%s.%s> NOT CACHED”
“UNABLE TO REFRESH <%s.%s.%s> CONTROL INFORMATION,REMOVED FROM CACHED”
“Class <%s.%s.%s> removed from cache”
MessageNumber
NVD1500I
NVD1501E
NVD1502E
NVD1503E
NVD1504E
NVD1505E
NVD1506E
NVD1507E
NVD1508E
NVD1509E
NVD1510E
NVD1511I
NVD1512W
NVD1513E
NVD1514I
NVD1515W
NVD1516E
NVD1517E
NVD1518I
NVD1519E
NVD1520E
NVD1521W
54 Chapter 2
MessageNumber
NVD1522W
NVD1523W
NVD1524I
NVD1525W
NVD1526E
NVD1527I
NVD1528E
NVD1529I
NVD1530E
NVD1531I
NVD1532E
NVD1533E
NVD1534I
NVD1535I
NVD1536I
NVD1537I
NVD1538I
NVD1539I
NVD1540I
NVD1541I
NVD1542E
NVD1543I
NVD1544I
NVD1545E
Log Message
“Unable to open edmprof file -- caching disabled”
“No cache list specified or cache list is empty”
“Cache Rebuilt”
“Unable to cache <%s.%s.%s.%s>, cache filled”
“ERROR ON CACHING INSTANCE FOR <%s.%s.%s>“
“Updated cache entry for <%s.%s.%s.%s>“
“INSUFFICIENT CACHE SIZE FOR <%d> CONTENT CACHE ENTRIES”
“Added Class <%s.%s.%s> to Content Cache”
“ERROR ON ADDING CLASS <%s.%s.%s> TO CONTENT CACHE”
“Added Instance <%s.%s.%s.%s> to Content Cache”
“ERROR ON ADDING INSTANCE <%s.%s.%s.%s> TO CONTENT CACHE”
“ERROR ON LOCKING CACHE SEMAPHORE”
“********** Page # %d ***********”
“Key Offset Size PID T S TD_Stamp Hits”
“FREE LIST”
“# OFFSET FREE LENGTH”
“%d %ld %ld”
“%5.5d %10.10lu %10.10lu,%10.10d %10.10d %10.10d %c %c %12.12s%10.10d “
“Index cache age pools freed <%ld> bytes @ %08X”
“Index cache disabled, icache_size = <%ld>“
“ERROR ON ATTACHING INDEX CACHE SHARED MEMORY (CHILD)”
“Index cache initialized, icache_prefix @ <%08X>“
“Index cache cleanup not required, icache_ptr = <%08X>“
“ERROR ON DETACHING INDEX CACHE SHARED MEMORY(PARENT)”
CM Configuration Server Messages 55
MessageNumber
NVD1546E
NVD1547E
NVD1548W
NVD1549I
NVD1550E
NVD1551E
NVD1552I
NVD1553I
NVD1554E
NVD1555I
NVD1556I
NVD1557I
NVD1558I
NVD1559W
NVD1560W
NVD1561W
NVD1562I
NVD1563I
Log Message
“ERROR ON REMOVING INDEX CACHE SHARED MEMORY SEGMENT(PARENT)”
“ERROR ON DETACHING INDEX CACHE SHARED MEMORYSEGMENT (CHILD)”
“Index cache deleted directory failed, directory not found for <%s.%s.%s>“
“Index cache deleted directory invalidated class <%s.%s.%s>“
“INDEX CACHE DELETE ENTRY FAILED, DIRECTORY NOT FOUND FOR CLASS <%s.%s.%s>“
“INDEX CACHE DELETE ENTRY FAILED, ENTRY NOT FOUND FOR INSTANCE <%s.%s.%s.%s>“
“Index cache delete entry <%ld> successful for <%s.%s.%s.%s>“
“Index cache freed <%ld> bytes @ <%08X>“
“INDEX CACHE EXPAND ENTRY ARRAY FROM <%ld> TO <%ld> BYTES FAILED FOR INSTANCE <%s.%s.%s.%s>“
“Index cache entry array expanded from <%ld> to <%ld> for instance <%s.%s.%s.%s>“
“Index cache bsearch entry for <%s.%s.%s.%s>“
“Index cache bsearch entry try <%ld> min <%ld> mid <%ld> max <%ld> cmp <%ld> found <%s.%s.%s.%s> @ <%08X>“
“Index cache bsearch entry <%ld> @ <%08X> try <%ld> found<%s.%s.%s.%s>“
“Index cache add entry <%s> not cached, type <%c> invalid for <%s.%s.%s>“
“Index cache add entry <%s> not cached, directory not found for <%s.%s.%s>“
“Index cache add entry <%s> not cached, directory invalidated for<%s.%s.%s>“
“Index cache add entry <%ld> found @ <%08X> for <%s.%s.%s.%s>“
“Index cache add entry <%ld> created @ <%08X> for instance<%s.%s.%s.%s>“
56 Chapter 2
MessageNumber
NVD1564E
NVD1565I
NVD1566I
NVD1567I
NVD1568I
NVD1569I
NVD1570I
NVD1571E
NVD1572E
NVD1573E
NVD1574I
NVD1575I
NVD1576I
NVD1577E
NVD1578E
NVD1579E
NVD1580E
NVD1581I
NVD1582I
NVD1583I
Log Message
“ERROR, INDEX CACHE GET ENTRY CELL NOT FOUND FOR INSTANCE <%s.%s.%s.%s>“
“Index cache get entry cell <%ld> found @ %08X for instance <%s.%s.%s.%s>“
“Index cache get entry cell not found for instance <%s.%s.%s.%s>“
“Index cache find directory cell for <%s.%s.%s>“
“Index cache find directory cell, found @ <%08X> for <%s.%s.%s>“
“Index cache get dir cell <%ld> allocated @ <%08X>“
“Index cache find first entry type <%c>, p_objpkt <%08X>, p_ich <%08X>“
“ERROR, INDEX CACHE FIND FIRST ENTRY INVALID ARGS”
“ERROR, INDEX CACHE FIND FIRST ENTRY, DIRECTORY NOT FOUND FOR <%s.%s.%s>“
“ERROR, INDEX CACHE FIND FIRST ENTRY, NO INSTANCES FOUNDFOR <%s.%s.%s>“
“Index cache find next entry <%ld> EOF”
“Index cache find first entry <%ld> found @ <%08X> for <%s.%s.%s.%s>“
“Index cache find first entry directory <%ld> found @ <%08X> for<%s.%s.%s>“
“ERROR, INDEX CACHE FIND FIRST ENTRY CALLED WITH INVALIDREQUEST TYPE <%c>“
“ERROR, INDEX CACHE FIND NEXT ENTRY CALLED BEFORE FIND FIRST ENTRY”
“ERROR, INDEX CACHE FIND NEXT ENTRY DETECTED CHANGEFOR CLASS <%s.%s.%s>“
“ERROR, INDEX CACHE FIND NEXT ENTRY, NO INSTANCES FOUNDFOR CLASS <%s.%s.%s>“
“Index cache next instance entry <%ld> @ <%08X> is <%s.%s.%s.%s>“
“Index cache find next entry directory <%ld> found @ <%08X> for<%s.%s.%s>“
“Index cache find next entry directory <%ld> found @ <%08X> for <%s.%s>“
CM Configuration Server Messages 57
Log Message
NVD1584I “Index cache find next entry directory <%ld> found @ <%08X> for <%s>“
NVD1585E “ERROR, INDEX CACHE FIND NEXT ENTRY CALLED WITH INVALIDREQUEST TYPE <%c>“
“Index cache find next entry type <%c> EOF”
“ERROR, INDEX CACHE DID NOT FIND ANY CLASSES IN DOMAIN<%s.%s>“
“ERROR, INDEX CACHE DID NOT FIND ANY DOMAINS IN FILE <%s>“
“INDEX CACHE ADD <%s.%s.%s> FAILED, INSUFFICIENT DIRECTORYCELLS ARE AVAILABLE”
“Initializing index cache directory @ <%08X> for class <%s.%s.%s>“
“Index cache initialization found <%ld> FDC database objects in <%-s>“
“Index cache allocating <%ld> FDC directory entries”
“Allocating index cache prefix and directory <%ld> bytes”
“ERROR ATTACHING INDEX CACHE SHARED MEMORY (PARENT)”
“Initialized index cache prefix memory <%ld> bytes @ <%08X>“
“Found index cache prefix memory @ <%08X>“
“Index cache cannot access class control information for class <%s.%s.%s>“
“Index cache cannot read class control information for class <%s.%s.%s>“
“Index cache cannot validate DMA instance count for class <%s.%s.%s>“
1600-1699 Cache
“INDEX CACHE CAN NOT FIND CLASS <%s.%s.%s>“
“Building index cache for class <%s.%s.%s>, loading <%ld> instances”
“Index cache entry <%ld> added @ <%08X> for instance <%s.%s.%s.%s>“
“Class <%s.%s.%s> DMA TotalInstanceCount <%ld> does not match actualinstance count”
“Class <%s.%s.%s> added to Index Cache, loaded <%ld> instances”
“Initialized index cache memory; directory cells=<%ld>; entry cells=<%ld>“
MessageNumber
NVD1586I
NVD1587E
NVD1588E
NVD1589E
NVD1590I
NVD1591I
NVD1592I
NVD1593I
NVD1594E
NVD1595I
NVD1596I
NVD1597W
NVD1598W
NVD1599W
NVD1600E
NVD1601I
NVD1602I
NVD1603W
NVD1604I
NVD1605I
58 Chapter 2
MessageNumber
NVD1606W
NVD1607I
NVD1608W
NVD1609W
NVD1610I
NVD1611I
NVD1612I
NVD1613W
NVD1614W
NVD1615W
NVD1616I
NVD1617I
NVD1618I
NVD1619I
NVD1620I
NVD1621I
NVD1622E
Log Message
“Delete Directory from Index Cache failed because (directory not found):crc=<%lX> type=<%c>“
“Deleted Entry <%ld> from Index Cache: name=<%s>“
“Deleted Directory <%ld> from Index Cache failed because (directory notfound): crc=<%lX> type=<%c>“
“Delete Entry from Index Cache failed because (directory not found):crc=<%lX> type=<%c> name=<%s>“
“Deleted first Entry <%ld> from Index Cache: crc=<%lX> type=<%c>name=<%s>“
“Deleted last Entry <%ld> from Index Cache: crc=<%lX> type=<%c>name=<%s>“
“Deleted Entry <%ld> from Index Cache: crc=<%lX> type=<%c>name=<%s>“
“Delete Entry from Index Cache failed because (entry not found): crc=<%lX> type=<%c> name=<%s>“
“Add to Index Cache failed because (this category is not cached): crc=<%lX>type=<%c> name=<%s>“
“Add to Index Cache failed because (free entry cell not found): crc=<%lX>type=<%c> name=<%s>“
“Index Cache Entry <%ld> added first for crc=<%lX> type=<%c>name=<%s>“
“Index Cache entry <%ld> added at end after <%ld> for crc=<%lX> type=<%c> name=<%s>“
“Index Cache entry <%ld> added at top before <%ld> for crc=<%lX> type=<%c> name=<%s>“
“Index Cache entry <%ld> added for crc=<%lX> after <%ld> type=<%c> name=<%s>“
“Index Caching children of <%s>“
“Unable to Index Cache for <%s.%s.%s>“
“ADD TO INDEX CACHE FAILED BECAUSE (FREE DIRECTORY CELLNOT FOUND): CRC=<%lX> TYPE=<%c> NAME=<%s>“
CM Configuration Server Messages 59
MessageNumber
NVD1623I
NVD1624W
NVD1625I
NVD1626I
NVD1627I
NVD1628I
NVD1629E
NVD1630I
NVD1631I
NVD1632I
NVD1633I
NVD1634I
NVD1635I
NVD1636I
NVD1637I
NVD1638E
NVD1639W
NVD1640W
NVD1641W
NVD1650I
NVD1651I
NVD1652I
Log Message
“Adding instances of <%s.%s.%s> to Index Cache”
“Unable to add entry to Index Cache (memory shortage) -- removing allentries in <%s.%s.%s>“
“First entry in Index Cache not found for <%s>“
“First entry <%d> found in Index Cache for <%s>, name=<%s>“
“Next entry (to %ld) in Index Cache not found”
“Next entry (to %ld) in Index Cache is <%ld> name=<%s>“
“<%s.%s.%s.%s> NO LONGER FITS IN INDEX CACHE. PERFORMANCEMAY BE ADVERSELY AFFECTED.”
“ICACHE: Using full walk algorithm for Class <%s.%s.%s>“
“ICACHE: Using load by component prefix algorithm for Class <%s.%s.%s>“
“ICACHE: Using chunky load non-component algorithm for Class<%s.%s.%s>“
“Using prefix <%s> to search in class <%s.%s.%s>“
“Loaded package <%ld> of <%ld>; running instance total is <%ld>“
“Loaded <%lu> instances”
“ICACHE: full walk algorithm loaded <%lu> instances”
“Package <%s.%s.%s.%s> has OID <%12.12s>“
“ICACHE LOAD ERROR: INVALIDATING CLASS <%s.%s.%s>“
“ICACHE: Manager will shutdown. Reason: ICACHE_COUNT_ERROR = SHUTDOWN”
“ICACHE: Manager will continue running. Reason:ICACHE_COUNT_ERROR = WARN”
“ICACHE Load Error for Class <%s.%s.%s>, contents will be retained due to ICACHE_COUNT_ERROR setting”
“Content Cache statistics for page segment <%lu>“
“Type, State, Add YMDHMS, Hit YMDHMS, Hits, D.C.I”
“%c, %c, %12.12s, %12.12s, %9lu, %s.%s.%s”
60 Chapter 2
Log Message
NVD1653I “Page segment entries in use <%lu>, unused <%lu>, stale <%lu>,incomplete <%lu>, cache hits <%lu>“
NVD1654I “Free area offset, size: bytes”
“0x%08X, 0x%08X:%lu”
“Page segment free areas <%lu>, total size <0x%08X, %lu> “
“Content Cache status is %s, %s”
“Total entries in use <%lu>, unused <%lu>, stale <%lu>, incomplete <%lu>,cache hits <%lu>“
“Total free areas <%lu>, total available size <0x%08X:%lu>“
“ERROR IN INITIALIZING CACHE FOR <%s>”
“Success in Initializing Cache for <%s>”
1700-1799 Semaphores and IPC
“ERROR, UNABLE TO CREATE <%s> EVENT SEMAPHORE, RC<%d>“
“ERROR WAITING FOR <%s> EVENT SEMAPHORE <%d>, RC<%d>“
“ERROR RESETTING <%s> EVENT SEMAPHORE <%d>, RC<%d>“
“ERROR REMOVING <%s> EVENT SEMAPHORE <%d>, RC<%d>“
“ERROR IN ZSYS_SETEVENTSEMAPHORE”
“ERROR, COULD NOT INITIALIZE IPC”
“ERROR, COULD NOT REINITIALIZE IPC”
“ERROR EXCEPTION <%s> IN CM AGENT TASK AT <%X>“
“ERROR, FUNCTION <%s> FAILED, RC<%d>“
“SEMAPHORE IS NOT FOUND FOR EXISTING CM AGENT <%s>“
“ERROR CREATING CACHING SEMAPHORE”
“ERROR, UNABLE TO LOCK SYSTEM SEMAPHORE”
“ERROR, UNABLE TO UNLOCK SYSTEM SEMAPHORE”
“ERROR CREATING INDEX CACHING SEMAPHORE”
“ERROR CREATING INDEX CACHE ENTRY SEMAPHORE”
MessageNumber
NVD1655I
NVD1656I
NVD1657I
NVD1658I
NVD1659I
NVD1660E
NVD1661I
NVD1701E
NVD1702E
NVD1703E
NVD1704E
NVD1705E
NVD1706E
NVD1707E
NVD1708E
NVD1709E
NVD1710E
NVD1711E
NVD1712E
NVD1713E
NVD1714E
NVD1715E
CM Configuration Server Messages 61
Log Message
“ERROR CREATING INDEX CACHE AGING SEMAPHORE”
“COULD NOT FIND ZCVT”
“COULD NOT FIND ZTCBG”
1900-1999 ZPOOLS
“%s”
“%s”
“%s”
“%s”
“%s”
2101-2201 CM Agent Connection
“ERROR BAD <%s> RECORD”
“ERROR RETRIEVING RECORD BUFFER. RC<%d>“
“ERROR, UNKNOWN <%s> RECORD”
“ERROR <%s> RECORD UPDATE FAILURE”
“ERROR SWABBING <%s> RECORD FROM NETWORK”
“ERROR SWABBING <%s> RECORD TO NETWORK”
“ERROR LOADING <%s> LIBRARY RC<%d>“
“ERROR COMMUNICATING (ATBALLOC) - <%s>“
“ERROR COMMUNICATING <%s>, ERROR MESSAGE <%s>“
“ERROR SENDING TCP_MSG TO CM AGENT”
“ERROR TERMINATING COMMUNICATION”
“Terminating Connection”
“EDMLOCTP retry interval is <%s> minutes”
“REJECTING NON-CM DISTRIBUTED CONFIGURATION SERVERCONNECTION BECAUSE DATABASE IS HARD LOCKED”
“Connection Terminated”
MessageNumber
NVD1716E
NVD1717E
NVD1718E
NVD1967I
NVD1972I
NVD1982E
NVD1983I
NVD1984D
NVD2101E
NVD2102E
NVD2103E
NVD2104E
NVD2105E
NVD2106E
NVD2107E
NVD2108E
NVD2109E
NVD2110E
NVD2111E
NVD2112I
NVD2113I
NVD2114E
NVD2115I
62 Chapter 2
MessageNumber
NVD2116I
NVD2117I
NVD2118E
NVD2119I
NVD2120E
NVD2121I
NVD2122E
NVD2123I
NVD2124I
NVD2125E
NVD2126I
NVD2127I
NVD2128I
NVD2129I
NVD2130I
NVD2131E
NVD2132E
NVD2134I
NVD2135E
NVD2136W
NVD2137W
NVD2138I
NVD2139E
NVD2140I
NVD2141I
NVD2142I
Log Message
“Sending Final Ack”
“Sent Final Ack”
“ERROR ACK-ING FINAL ACK”
“Sending EDMLOCTP response to CM Agent”
“ERROR SENDING EDMLOCTP RESPONSE TO CM AGENT”
“CM Agent Task Started, active tasks <%d>“
“ERROR IN CLINIT, ERRMSG <%s>“
“Host name for New Connection is <%s>“
“Unable to get Host name for New Connection, Errmsg <%s>“
“ERROR POSTING COMMUNICATION MANAGER”
“Session Started”
“Session Ended “
“CM Agent Task Ended, reason <%s>, active tasks <%d>“
“Simulation Task Started, active tasks <%d>“
“Simulation Task Ended, active tasks <%d> “
“ERROR, INVALID LU TYPE OF <%c>“
“ERROR, ADDRESS <%s> IN USE”
“Terminating previous Connection PID<%d>“
“ERROR, ADDRESS <%s> STILL IN USE”
“Wrong TPN <%8.8s> received from LU <%17.17s> EDMTRANS expected.”
“Wrong TPN <%8.8s> received from LU <%17.17s> EDMLOCTP expected.”
“Setting DRAIN flag for the CM Agent <%s>“
“REJECTING INBOUND REQUEST FROM <%s>“
“Conversation -- ID <%04X%04X> established”
“CM Agent INIT successful. Peer name is <%s>“
“Expected TPN <%8.8s> received from LU <%17.17s>“
CM Configuration Server Messages 63
MessageNumber
NVD2143I
NVD2144E
NVD2145E
NVD2146E
NVD2147E
NVD2148E
NVD2149E
NVD2150W
NVD2151W
NVD2152I
NVD2153E
NVD2154E
NVD2155E
NVD2156I
NVD2157I
NVD2158I
NVD2159E
NVD2160I
NVD2161E
NVD2162E
NVD2163E
NVD2164E
Log Message
“Task detected a short on storage condition - CM Agent will be asked to try later”
“ERROR <%d> IN PUTREC ON TEMPLATE”
“ERROR <%d> IN PUTREC ON HEAP”
“ERROR <%d> IN PUTREC ON EOB”
“ERROR <%d> IN PUTREC ON FLUSH”
“ERROR <%d> IN PUTREC ON DATA”
“ERROR <%d> IN GETREC”
“Session Loss has been detected for <%s>, Task Ending”
“Wrong TPN <%8.8s> received on LU <%17.17s> EDMLOSLU expected.”
“Sending zero bytes across”
“INVALID MESSAGE START CHARACTER IN <%s>“
“INVALID MESSAGE END CHARACTER IN <%s>“
“INVALID MESSAGE IN <%s>“
“%s TH: TLEN=%.4X TCODE=%.4X OAT=%.4X DAT=%.4X”
“%s BH: BLEN=%.4X BCODE=%.4X BOBJ=%.8s FLAG1=%.2XFLAG2=%.2X FLAG3=%.2X FLAG4=%.2X”
“%s RH: RLEN=%.4X RCODE=%.4X RCLEN=%.4X FLAG1=%.2XFLAG2=%.2X TYPE=%c COMPRESS=%.1x SPANREC=%.1x”
“ERROR IN ZTPRECV”
“rec @ is 0”
“DECOMPRESSED RECORD LENGTH <%d> GREATER THAN MAXALLOWED <%d>“
“RECORD DECOMPRESSION BUFFER CANNOT BE EXPANDED FROM <%d> TO <%d> BYTES”
“SPANNED RECORD LENGTH <%d> GREATER THAN MAX ALLOWED<%d>“
“SPANNED RECORD BUFFER CANNOT BE EXPANDED FROM <%d>TO <%d> BYTES”
64 Chapter 2
MessageNumber
NVD2165I
NVD2166I
NVD2167E
NVD2168I
NVD2169E
NVD2170E
NVD2171E
NVD2172I
NVD2173I
NVD2174E
NVD2175I
NVD2176I
NVD2177I
NVD2178I
NVD2179E
NVD2180I
NVD2181E
NVD2182E
NVD2183I
NVD2184I
NVD2185I
NVD2186E
NVD2187I
NVD2188I
NVD2189I
Log Message
“Spanned record processing”
“Last record in block”
“RECORD LEN TOO SMALL”
“End of spanned record, length=<%d>“
“ERROR, ZERO LENGTH RECORD”
“ERROR <%d> IN PROCESSING SPANNING RECORD”
“DECOMPRESS ERROR UNCOMPRESSED LENGTH=<%d>; EXPECTEDLENGTH=<%d>“
“Decompressed Length <%d>“
“Returned Length <%d>“
“UNEXPECTED ERROR, RECORD LENGTH <%d> < RECORD HEADERSIZE <%d>“
“Record Mismatch: record expected is <%s>“
“End-of-Block”
“Compression from <%d> to <%d>“
“No compression using original length of <%d>“
“SPANNED RECORD ERROR”
“AUTOFLUSHING Send Buffer”
“ERROR IN ZTPSEND”
“ERROR IN AUTO-FLUSH RESPONSE ERROR”
“putrec ADDR <%08x> LEN <%d> SEQNO <%d> TYPE <%d>“
“Template copied to <%08X>, length <%d>“
“Flushing Send Buffer”
“UNDEFINED PUTREC REQUEST TYPE”
“putrec(%08x,%d,%d,%s,%d,%08x) complete”
“putrec TH=<%d> BH=<%d> RH=<%d> BLKS=<%d> PUTS=<%d>“
“Freeing saved template @ <%08X>, length <%d>“
CM Configuration Server Messages 65
Log Message
NVD2190E “ERROR <%s> REQUEST TYPE <%d>, RC <%d>, Msg <%s>, SessionAddress <%p>, Result <%d>“
NVD2191E “ERROR <%s> RC <%d>, Msg <%s>, SessionAddress <%p>, Result <%d>“
“%s RC <%d>, Msg <%s>, SessionAddress <%p>, Result <%d>“
“PUTREC-FORMAT ERROR RC <%d>“
“PUTREC-FLUSH ERROR RC <%d>“
“PUTREC-DATA ERROR RC <%d>“
“ZTCPMGR: Simulation discontinued due to short on storage condition”
“ZTCPMGR: Simulation discontinued due to task attach error”
“CM Agent Disconnected”
“Communications Timed Out”
“Communications error rc=<%d - %s>“
2201-2207 Pipe
“ERROR, UNABLE TO OPEN PIPE”
“ERROR, UNABLE TO READ FROM PIPE”
“ERROR, UNABLE TO WRITE TO PIPE”
“ERROR, UNABLE TO ATTACH TASK”
“TASK ABENDED WHILE PROCESSING OBJECT <%s>“
“Transferred record of size <%d> bytes over pipe”
“ERROR SENDING RECORD OF SIZE <%d> BYTES OVER PIPE”
2208-2249 Compress
“COMPRESS: INVALID INPUT ADDRESS <%08x> OR LENGTH <%d>“
“COMPRESS: INVALID OUTPUT ADDRESS <%08x> OR LENGTH <%d>“
“COMPRESS: OUTPUT BUFFER <%d> SMALLER THAN INPUT BUFFER <%d>“
“COMPRESS: Input buffer @ <%08x> length <%d>“
“COMPRESS: ran out of room”
MessageNumber
NVD2192I
NVD2193E
NVD2194E
NVD2195E
NVD2196I
NVD2197I
NVD2198I
NVD2199I
NVD2200I
NVD2201E
NVD2202E
NVD2203E
NVD2204E
NVD2205E
NVD2206I
NVD2207E
NVD2208E
NVD2209E
NVD2210E
NVD2211I
NVD2212I
66 Chapter 2
Log Message
“COMPRESS: Output <%d> larger than input <%d>“
“COMPRESS: Output buffer @ <%08x> length <%d>“
“DECOMPRESS: INVALID INPUT ADDRESS <%08x> OR LENGTH <%d>“
“DECOMPRESS: INVALID OUTPUT ADDRESS <%08x> OR LENGTH<%d>“
“DECOMPRESS: OUTPUT BUFFER LENGTH <%d> SMALLER THAN INPUT BUFFER LENGTH <%d>“
“DECOMPRESS: Input buffer @ <%08x> length <%d>“
“DECOMPRESS: OUTPUT BUFFER @ <%08x> LENGTH <%d> TOO SMALL”
“DECOMPRESS: OUTPUT BUFFER LENGTH EXCEEDED OUTLEN=<%d> INLEN=<%d> IN_OFFSTE=<%d> OUT_OFFSET=<%d>EXP_SIZE=<%d>“
“DECOMPRESS: Output buffer @ <%08x> length <%d>“
“%s *%.*s*”
2250-2299 FTP
“REQUESTED OBJECT ID BUFFER IS <%d>“
“SEND FILES FOR HEAP <%d>“
“MISSING OBJECT ID LIST FOR HEAP <%d>“
“File Transfer Complete”
2300-2399 Miscellaneous
“EOB not received”
“ERROR FORCING CM AGENTS TO END!”
“ERROR ALLOCATING TCLBLK”
“ERROR IN TASK TCL INITIALIZATION”
2600-2699 File Input/Output
“ERROR OPENING FILE <%s>”
MessageNumber
NVD2213I
NVD2214I
NVD2215E
NVD2216E
NVD2217E
NVD2218I
NVD2219E
NVD2220E
NVD2221I
NVD2222I
NVD2250E
NVD2251E
NVD2252E
NVD2253I
NVD2300I
NVD2301E
NVD2302E
NVD2303E
NVD2601E
CM Configuration Server Messages 67
MessageNumber
NVD2602E
NVD2603E
NVD2604E
NVD2605E
NVD2606I
NVD2607E
NVD2608E
NVD2609E
NVD2610E
NVD2611E
NVD2612E
NVD2613E
NVD2614E
NVD2615E
NVD2616I
NVD2617E
NVD2618I
NVD2619E
NVD2620I
NVD2621I
NVD2622I
NVD2623E
NVD2624E
NVD2625E
Log Message
“ERROR CLOSING FILE <%s>“
“ERROR READING FILE <%s>”
“ERROR WRITING FILE <%s>”
“ERROR, ZERO-LENGTH RECEIVED BY GETREC(T_DATA) FOR FILE <%s>”
“Flushing Data”
“ERROR, UNABLE TO OPEN CONTROL FILE”
“UNABLE TO SET CONTROL FILE POINTER FOR FILE CONTROL UPDATE”
“UNABLE TO READ CONTROL FILE FOR FILE CONTROL UPDATE”
“UNABLE TO UPDATE FILE CONTROL INFORMATION”
“UNABLE TO SET CONTROL FILE POINTER”
“UNABLE TO READ CONTROL RECORD”
“UNABLE TO UPDATE CONTROL RECORD”
“UNABLE TO WRITE CONTROL ENTRY”
“ERROR, CONTROL FILE NOT FOUND <%s>“
“READFILE rc <%d>“
“ERROR, UNABLE TO CREATE FILE <%s>“
“Writing %d Bytes to File <%s>“
“ERROR WRITING %d BYTES TO FILE <%s>“
“Bytes Written <%d>“
“File Read <%s>“
“File Size <%d>“
“ERROR, UNABLE TO READ ENTIRE FILE <%s> SIZE <%d> BYTESREAD <%d>“
“ERROR READING CONTROL FILE: #RECS = <%d>, REC# = <%d>“
“ERROR UPDATING CONTROL FILE: FILE <%s> DOMAIN <%s> CLASS <%s> INSTANCE <%s>“
68 Chapter 2
MessageNumber
NVD2626E
NVD2627E
NVD2628E
NVD2629I
NVD2630E
NVD2631E
NVD2632W
NVD2633I
NVD2634E
NVD2635E
NVD2636E
NVD2637E
NVD2638I
NVD2639E
NVD2640E
NVD2641E
NVD2642E
NVD2643I
NVD2644I
NVD2645I
NVD2646I
NVD2647I
NVD2648I
Log Message
“ERROR DELETING FILE <%s>“
“ERROR IN PUTREC ON <%s> RC <%d>“
“ERROR SENDING AUXILIARY DATA <%d>“
“Opening <%s>“
“ERROR OPENING <%s>, ERRNO <%s> “
“FSTAT : <%s>“
“File sizes differ (Actual) <%d> : (Req.) <%d>“
“Bytes Read <%d>“
“ERROR READING CLASS <%s.%s.%s>, RC<%d>“
“ERROR IN PUTREC FOR CLASS <%s.%s.%s>, RC<%d>“
“ERROR IN PUTREC OF INSTANCE <%s.%s.%s.%s>, RC<%d>“
“ERROR IN PUTREC OF OBJECT <%s.%s.%s.%s>, SEQNO<%d>,RC<%d>“
“Sending DELTA <%s>“
“ERROR <RC=%d> OPENING PATCH <%s>“
“ERROR IN PUTREC OF DELTA FILE <%s>, SEQNO<%d>, RC<%d>“
“ERROR IN PUTREC ON OBJECT IDs <%d>“
“ERROR OPENING INSTANCE <%s.%s.%s.%s>“
“Resource transfer for <%s.%s.%s.%s> begins, <%lu> bytes starting at offset<%lu>“
“Resource transfer for <%s.%s.%s.%s> in progress, <%lu> of <%lu> bytes sent in <%1.1f> seconds”
“Resource transfer for <%s.%s.%s.%s> complete, <%lu> bytes sent in <%1.1f> seconds”
“File transfer for <%s> begins, <%lu> bytes starting at offset <%lu>“
“File transfer for <%s> in progress, <%lu> of <%lu> bytes sent in <%1.1f> seconds”
“File transfer for <%s> complete, <%lu> bytes sent in <%1.1f> seconds”
CM Configuration Server Messages 69
Log Message
“ERROR UNABLE TO FIND DELTA OBJECT”
“ERROR CREATING FILE FROM RESOURCE <%s.%s.%s.%s>“
NVD2651I “Deleting Patch file <%s> ResourceSize <%d> PatchSize <%d>“
NVD2652E “ERROR CREATING PATCH FILE FROM <%s> TO <%s> BECAUSE OF <%s>“
“ERROR EXPLODING THE FILE <%s> BECAUSE OF <%s>“
“ERROR OPENING TEMPORARY DELTA FILE <%s>”
“ERROR CREATING RESOURCE <%s.%s.%s.%s>”
“ERROR INVALID DATABASE PATH, <%s>”
“ERROR CHECK DATABASE PATH <DBPATH> IN THE CMCONFIGURATION SERVER PROFILE FILE”
“ERROR INVALID DMA DATABASE PATH, <%s>”
“ERROR CHECK DMA DATABASE PATH <DMA_STAGE_PATH> IN THE CM CONFIGURATION SERVER PROFILE FILE”
“ERROR WHILE OPENING TRACE FILE: <%s>”
“UNKNOWN RECORD TYPE <%s>”
“ERROR OPENING QUEUE FILE <%s>”
“ERROR READING LIST FILENAME FROM QUEUE FILE <%s>”
3000-3100 Object Resolution
“ERROR, OBJECT PROCESSING FOR <%s.%s> FAILED RC=<%d>”
“ERROR, OBJECT RESOLUTION ABORTED - RESOLUTION LIMITEXCEEDED”
“ERROR, PROCESSING ABORTED”
“ERROR, SUBSTITUTION FAILED”
“ERROR, MASTER PROCESSING ABORTED”
“Unable to resolve Object <%s>, rc=<%d>“
“ERROR, STOPPING CURRENT PATH OF OBJECT RESOLUTION”
MessageNumber
NVD2649E
NVD2650E
NVD2653E
NVD2654E
NVD2655E
NVD2656E
NVD2657E
NVD2658E
NVD2659E
NVD2660E
NVD2661E
NVD2662E
NVD2663E
NVD3001E
NVD3002E
NVD3003E
NVD3004E
NVD3005E
NVD3006I
NVD3007E
70 Chapter 2
MessageNumber
NVD3008E
NVD3009I
NVD3010I
NVD3011I
NVD3012I
NVD3013W
NVD3014I
NVD3015I
NVD3016I
NVD3017E
NVD3018E
NVD3019E
NVD3020E
NVD3021E
NVD3022E
NVD3023E
NVD3024E
NVD3025I
NVD3026E
NVD3027E
NVD3028E
NVD3029E
NVD3030E
NVD3031E
Log Message
“ERROR, INVALID ENTRY TYPE <%s>“
“Resolving <%s.%s.%s.%s>“
“Object Resolved <%s>“
“'%8.8s' ZPCB at <%p> directory at <%p>“
“'%8.8s' ZPCB at <%p> directory at <%p>“
“Object ID list not found for <%s>“
“Requested Obj. <%s> Buflen <%d>“
“Taking type <%c> connection: <%s.%s.%s(%s)> to class existing in resolution tree”
“%s<%s> depth: <%i>“
“ERROR, FAILED FINDING FIRST DOMAIN IN <%s>“
“ERROR, FAILED FINDING FIRST CLASS IN <%s.%s>“
“ERROR, FAILED FINDING FIRST INSTANCE IN <%s.%s>“
“ERROR, FAILED FINDING NEXT DOMAIN IN <%s>“
“ERROR, FAILED FINDING NEXT CLASS IN <%s.%s>“
“ERROR, FAILED FINDING NEXT INSTANCE IN <%s.%s.%s>“
“ERROR, NO INSTANCES FOUND IN INDEX CACHE FOR CLASS <%s.%s.%s>“
“ERROR, GETTING INSTANCE -- REMOVING ALL ENTRIES IN <%s.%s.%s>“
“GET_OBJECT”
“ERROR, GETTING TEMPLATE FROM GETREC, RC = <%d>“
“ERROR, GETTING TEMPLATE BUFFER”
“ERROR, NO RECORDS IN OBJECT”
“ERROR, UNABLE TO RESOLVE OBJECT, RC = <%d>“
“ERROR, UNABLE TO STORE DATA RECORD, RC = <%d>“
“ERROR, UNABLE TO RESOLVE OBJECT, RC = <%d>“
CM Configuration Server Messages 71
MessageNumber
NVD3032E
NVD3033W
NVD3034I
NVD3035W
NVD3036W
NVD3037E
NVD3038E
NVD3039E
NVD3040E
NVD3041I
NVD3042I
NVD3043E
NVD3044I
NVD3045I
NVD3046E
NVD3047I
NVD3048E
NVD3049I
NVD3050I
NVD3051I
NVD3052I
NVD3053I
NVD3054E
NVD3055I
NVD3056I
Log Message
“ERROR, UNKNOWN STATUS FROM GETREC, RC = <%d>“
“Single Service Instance Name not specified”
“Single Service Instance Name should be specified in ZOBJSSIN variable”
“Single Service Class Name not specified; defaulting to ZSERVICE”
“Single Service Domain Name not specified; defaulting to SYSTEMX”
“UNABLE TO PROCESS OBJECT, RC = <%d>“
“BAD STATUS FROM zrodo(), RC = <%d>, OBJECT = <%s>“
“ERROR, UNKNOWN RECORD TYPE, RC = <%d>“
“ERROR, OBJECT NOT FOUND <%8.8s>“
“Bandwidth Reset to Unlimited”
“Bandwidth Max=<%lu>, Percent=<%u>, Effective=<%lu>“
“OBJECT RESOLUTION ABORTED - DUE TO RETURN CODE, RC = <%d>“
“Resolving <%s>“
“Message Changes %s %s <%s> <%8.8s>“
“RECURSIVE TREE RESOLUTION ABORTED”
“RESOLUTION Begins: <%s.%s (%s)>“
“RESOLUTION LIMIT <%d> CURRENT RESOLUTION COUNT <%d>“
“RESOLUTION Ends: <%s.%s> CRC: <%s>“
“Total time for MASTER resolution is <%d> seconds”
“Total number of objects resolved <%d>“
“Resolution cannot cache objects created by <%s.%s>“
“Resolution can cache objects created by <%s.%s>“
“%8.8s FIELD LENGTH <%d> EXCEEDS MAX FIELD SIZE(%d) - FIELDIGNORED”
“Ignoring Expressions”
“EXPRESSION STARTED:”
72 Chapter 2
MessageNumber
NVD3057I
NVD3058I
NVD3059I
NVD3060E
NVD3061W
NVD3062E
NVD3063E
NVD3064E
NVD3065I
NVD3066I
NVD3067I
NVD3068E
NVD3069I
NVD3070I
NVD3071I
NVD3072I
NVD3073I
NVD3074I
NVD3075I
NVD3076E
NVD3077E
NVD3078E
NVD3079E
NVD3080E
NVD3081I
Log Message
“Resolution cache encountered expression for class <%s>, <%8.8s> = <%0.*s>“
“Resetting Object Resolution STOP Flag”
“Resolution cache encountered method for class <%s>, <%8.8s> = <%0.*s>“
“ERROR DEFINING VARIABLE -- ABORTING RESOLUTION”
“Ignoring duplicate instance <%-s.%-s.%-s> OBJECTID <%s>“
“MISSING OR BLANK CLASS NAME IN <%-s>“
“PARENT F.D.C IS <%-s.%-s.%-s>“
“MISSING OR BLANK INSTANCE NAME IN <%-s>“
“Resolution message changed <%-s.%-s (%s)>“
“DATE/TIME PARENT: <%s %s>“
“DATE/TIME CHILD: <%s %s>“
“PARENTS ZOCB NOT FOUND”
“DATE/TIME PERCOLATION: PARENT: <%s> CHILD: <%s>“
“Migrate <%8.8s> -> <%8.8s>“
“Resolved Connects: _ALWAYS_ (%d)”
“Executed Methods: _ALWAYS_ (%d)”
“Resolved Connects: _ALWAYS_ (%d), %s (%d)”
“Executed Methods: _ALWAYS_ (%d), %s (%d)”
“UNKNOWN Processing Begins”
“ERROR SETTING OBJECT QUEUE <%-s>“
“ERROR RETRIEVING HEAP # %d FOR OBJECT <%-s>“
“ERROR RETRIEVING OBJECT <%-s>“
“MISSING INSTANCE LIST FOR CLASS <%-s>“
“SINGLE SERVICE RESOLUTION SKIPPING <%-s.%-s.%-s.%-s>“
“Processing Requested Service <%-s.%-s.%-s.%-s>“
CM Configuration Server Messages 73
Log Message
“ZBASE resolution begins: %s.%s <%s>“
“ERROR, MASTER RESOLUTION ABORTED”
“ERROR, UNABLE TO RESOLVE OBJECT RC = <%d>, NAME: <%s>, “
“TREE RESOLUTION CALLED RECURSIVELY”
“INVALID HANDLE SPECIFIED <%s>“
“ERROR CREATING TREEVAR OBJECT”
“ERROR RESOLVING <%s>“
“TREE NOT INITIALIZED”
“HANDLE NOT FOUND OR INVALID”
“HANDLE MISMATCH ZTCBG <%s> ZTREHAND <%s>“
“INVALID TYPE”
“Expression (%s) Len <%d> “
“Result (%s) Len <%d>“
“ERROR DURING OBJECT RESOLUTION, RC = <%d>, OBJECT NAME:<%s>“
“Object <%s> expanded. Old heap size used/allocated:<size_old_used/size_old>, new heap size used/allocated:<size_new_used/size_new>, number of heaps: <heaps>.”
“Persistent object <%s> created, heap size used/allocated:<size_used/size_allocated>, number of heaps: <number_of_heaps>.”
“Object <%s>, heap size: <size>, heap index: expanded. Old index size: <size_old>, new index size: <size_new>, max heap: <index_slots>.”
“Removing object <%s>: heap size used/allocated:<size_used/size_allocated>, number of heaps used/allocated:<number_of_used_heaps/number_of_allocated_heaps>.”
“RESOLUTION ABORTED: <%s> HAS BEEN ALREADY RESOLVED IN THE RESOLUTION LEG”
3101-3199 User ID Errors
“USERID NOT FOUND IN INBOUND OBJECT”
MessageNumber
NVD3082I
NVD3083E
NVD3084E
NVD3085E
NVD3086E
NVD3087E
NVD3088E
NVD3089E
NVD3090E
NVD3091E
NVD3092E
NVD3093I
NVD3094I
NVD3095E
NVD3096I
NVD3097I
NVD3098I
NVD3099I
NVD3100E
NVD3101E
74 Chapter 2
Log Message
NVD3102E “USERID NOT IN PROFILE ADMIN_LIST”
NVD3103E “ERROR IN VARPUT OF ZMTHPRMS, UNABLE TO VERIFYUSERID/PASSWORD”
“USERID/PASSWORD VERIFICATION ERROR.”
“ERROR RETRIEVING USERID”
3200-3299 Object Resolution
“Persistent object <%s> will be treated as transient with PCB name <%s>“
“RESOLUTION ABORTED: TASK_STACK_SIZE IS ABOUT TO OVERFLOW, USED <%d> of <%d>, DEPTH <%d>, CHECK FOR CIRCULAR REFERENCES”
“<%s.%s.%s> for %s agent was filtered out by <%s.%s = %s> filter”
“<%s.%s.%s> for %s agent was allowed through <%s.%s = %s> filter”
“ERROR: ZOCB %08X HAS ZERO ->PCB; IGNORED FOR TREE RES;proces_vars=%d”
“ERROR: ZOCB %08X HAS ZERO ->PCB; FAILS NON-TREE RES”
“Resolution cache encountered substitution for class <%s>, variable<%8.8s> = <%s>”
“Variable <%0.8s> deleted from object <%0.8s>”
“All variables deleted from object <%0.8s>, directory @ <%08x>, size <%ld>, reset”
“Resolving <%s.%s.%s.%s>, Cached Template Size Mismatch, Expected Size <%lu>, Actual Size <%lu>”
“Refreshing Cache for Class <%s.%s.%s.%s>”
“Resolving <%s.%s.%s.%s>, Cached Instance Size Mismatch, Expected Size <%lu>, Actual Size <%lu>”
“Refreshing Cache for Instance <%s.%s.%s.%s>”
“RESOLVING <%s.%s.%s.%s>, DATABASE TEMPLATE SIZE MISMATCH, EXPECTED SIZE <%lu>, ACTUAL SIZE <%lu>”
“RESOLVING <%s.%s.%s.%s>, DATABASE INSTANCE SIZE MISMATCH,EXPECTED SIZE <%lu>, ACTUAL SIZE <%lu>”
MessageNumber
NVD3104E
NVD3105E
NVD3200I
NVD3201E
NVD3202I
NVD3203I
NVD3204E
NVD3205E
NVD3206I
NVD3207I
NVD3208I
NVD3210W
NVD3211W
NVD3212W
NVD3213W
NVD3214E
NVD3215E
CM Configuration Server Messages 75
Log Message
3300-3399 Tree Resolution
“TREE RESOLUTION CALLED RECURSIVELY”
“Make Tree starting”
“ERROR CREATING TREEVAR OBJECT”
“TREE NOT INITIALIZED”
3500-3599 Metaclass Resolution
“ERROR, METACLASS PROCESSING STOPPED”
“ERROR, METACLASS <%s> PROCESSING FAILED RC=<%d>“
“ERROR, METACLASS PROCESSING ABORTED”
“ERROR CREATING DOMAINLIST FOR CLASS <%s>“
“ERROR, DOMAIN <%s> NOT FOUND IN DOMAINLIST”
“ERROR, DOMAIN <%s> COULD NOT BE ADDED TO DOMAINLISTFOR CLASS <%s>“
“MetaClass Resolution not required for <%s.%s.%s>“
“MetaClass not found to reset priorities”
“MetaClass Set Info For <%s>“
“MetaClass Resolution for <%s>“
3600-3699 Class Resolution
“Class not processed - length is zero <%8.8s>“
“Connection <%-s> ignored - floor class <%8.8s> reached”
“Class not processed - blank field <%8.8s>“
“Class not processed - _NULL_ field <%8.8s>“
“Message changed back from <%8.8s> <%8.8s>“
“Dormant connection <%8.8s %8.8s>“
“Remote class field <%8.8s>“
“Class field <%8.8s> not selected - generic MSG <%8.8s>“
MessageNumber
NVD3300E
NVD3301I
NVD3302E
NVD3303E
NVD3501E
NVD3502E
NVD3503E
NVD3520E
NVD3521E
NVD3522E
NVD3523I
NVD3524I
NVD3525I
NVD3526I
NVD3600I
NVD3601I
NVD3602I
NVD3603I
NVD3604I
NVD3605I
NVD3606I
NVD3607I
76 Chapter 2
Log Message
“Message changed from <%8.8s> to <%8.8s>“
“Class field <%8.8s> selected - generic MSG <%8.8s>“
“CLASS DMN <%s> CLS <%s>“
“CLASS DOES NOT EXIST”
“<%s>.<%s>.<%s>“
“Processing connection <%-s> for floor class <%8.8s>“
“ERROR READING CLASS”
4000-4099 Security
“CM Configuration Server License expired on <%s>“
“CM Configuration Server License will expire on <%s>“
“CM Configuration Server Not Running on a Licensed Platform”
“CM Agent Information <%s>“
“REJECTING CONNECTION, LICENSE LIMIT <%d> EXCEEDED”
“REJECTING CONNECTION, NOT A LICENSED PLATFORM”
“CM Agent is Year2000 Compliant”
“CM Agent is NOT Year2000 Compliant”
“CM Agent is Non Unicode”
“REJECTING CM AGENT BECAUSE IT IS NOT YEAR2000 AWARE”
“%s Task Limit Exceeded -- sending <retry in %d min> response”
“Logons are disabled -- sending <retry in %d min> response”
“Hard Task Limit Exceeded -- closing connection”
“Logon disabled -- closing connection”
“Short On Storage -- sending <retry in %d min> response”
“CM Distributed Configuration Server security method was not specified in edmprof. Security check disabled”
“Soft Task Limit Exceeded -- closing connection”
MessageNumber
NVD3608I
NVD3609I
NVD3610I
NVD3611E
NVD3612I
NVD3613I
NVD3614E
NVD4001W
NVD4002W
NVD4003W
NVD4004I
NVD4005E
NVD4006E
NVD4007I
NVD4008I
NVD4009I
NVD4010E
NVD4011I
NVD4012I
NVD4013I
NVD4014I
NVD4015I
NVD4016I
NVD4017I
CM Configuration Server Messages 77
Log Message
“Short on Storage condition reached -- closing connection”
“Shutdown has been detected -- closing connection”
“Soft Task Limit Exceeded and LIMIT=CLOSE set -- closing connection”
“Short on Storage condition reached and LIMIT=CLOSE set -- closingconnection”
“INBOUND OBJECT <%s>, NOT IDENTIFY. CONNECTION TERMINATED”
“CONNECTION REJECTED: PRODUCT <%s> IS NOT LICENSED”
“CONNECTION OF <%s> REJECTED: EXCEEDED LICENSE LIMIT
“License is taken from <%s> “
“License1 string found <%s> “
“License2 string found <%s> “
4100-4199 License and Profile
“LICENSE VIOLATION -- 90 DAYS GRACE PERIOD HAS EXPIRED”
“LICENSE VIOLATION -- CM CONFIGURATION SERVER WILLSHUTDOWN IN <%d> DAYS, ON <%i/%i/%i>“
“LICENSE VIOLATION -- CM CONFIGURATION SERVER WILLSHUTDOWN IN <90> DAYS, ON <%i/%i/%i>“
“<%s> file is not found, unable to verify product consistency”
“[RCS_VERSION] section not found or empty in <%s> file. No versionverification will be performed”
“version.nvd: <%s>“
“Verifying product consistency according to <%s> file”
“Timestamp for <%s> is <%4.4d/%2.2d/%2.2d %2.2d:%2.2d:%2.2d> and newer than required <%4.4d/%2.2d/%2.2d %2.2d:%2.2d:%2.2d>“
“TIMESTAMP FOR <%s> IS <%4.4d/%2.2d/%2.2d %2.2d:%2.2d:%2.2d>AND OLDER THAN REQUIRED <%4.4d/%2.2d/%2.2d%2.2d:%2.2d:%2.2d>“
“File size for <%s> is <%d> and does not match required <%d>“
MessageNumber
NVD4018I
NVD4019I
NVD4020I
NVD4021I
NVD4022E
NVD4024E
NVD4025E
NVD4026I
NVD4027I
NVD4028I
NVD4100E
NVD4101E
NVD4102E
NVD4103W
NVD4104W
NVD4105I
NVD4106I
NVD4107W
NVD4108E
NVD4109W
78 Chapter 2
Log Message
NVD4110W “MD5 for <%s> is <%s> and does not match required <%s>“
NVD4111E “REQUIRED FILE <%s> NOT FOUND IN <%s>. FILE VERSION VERIFICATION FAILED.
“Identified License for SSL”
“Identified License for test environment”
“Datestamp for <%s> is <%4.4d/%2.2d/%2.2d> and NEWER than required<%4.4d/%2.2d/%2.2d>“
“DATESTAMP FOR <%s> IS <%4.4d/%2.2d/%2.2d> AND OLDER THAN REQUIRED <%4.4d/%2.2d/%2.2d>“
4200-4299 Database and Y2K
“Starting database verification”
“Database verification completed successfully”
“Database verification failed”
“Verification: Processing File<%s>“
“Y2K VERIFICATION FAILED FOR <%s>.<%s>“
“Verification: Processing Domain <%s>.<%s>“
“Y2K VERIFICATION FAILED FOR DOMAIN <%s>.<%s>“
“Verification: Processing class <%s>.<%s>.<%s>“
“Y2K VERIFICATION FAILED FOR CLASS <%s>.<%s>.<%s>“
“Y2K VERIFICATION FAILED FOR CLASS CONTROL INFO FOR<%s>.<%s>.<%s>“
“Y2K VERIFICATION FAILED FOR INSTANCE <%s>.<%s>.<%s>.<%s>““
“Y2K VERIFICATION FAILED FOR CLASS <%s>.<%s>.<%s>; FIELD = LastUpdatedDate”
“Y2K VERIFICATION FAILED FOR CLASS <%s>.<%s>.<%s>; FIELD = LastSyncDate”
“Y2K VERIFICATION FAILED FOR CLASS <%s>.<%s>.<%s>; FIELD = LastCreateDate”
MessageNumber
NVD4112I
NVD4113I
NVD4114W
NVD4115E
NVD4200I
NVD4201I
NVD4202I
NVD4203I
NVD4204E
NVD4205I
NVD4206E
NVD4207I
NVD4208E
NVD4209E
NVD4210E
NVD4211E
NVD4212E
NVD4213E
CM Configuration Server Messages 79
MessageNumber
NVD4214E
NVD4215E
NVD4216E
NVD4217I
NVD4218E
NVD4219W
NVD4220I
NVD4221E
NVD4222W
NVD4223W
NVD4224E
NVD4225I
NVD4226W
NVD4227W
NVD4228E
NVD4229E
NVD4230E
NVD4231E
NVD4232E
NVD4233E
Log Message
“Y2K VERIFICATION FAILED FOR CLASS <%s>.<%s>.<%s>; FIELD = LastClassUpdateDate”
“Y2K VERIFICATION FAILED FOR CLASS <%s>.<%s>.<%s>; FIELD = LastInstanceUpdateDate”
“Y2K VERIFICATION FAILED FOR CLASS <%s>.<%s>.<%s>; FIELD = LastDataUpdateDate”
“Verify Instance <%s.%s.%s.%s> Size changed to match class template”
“VERIFY INSTANCE <%s.%s.%s.%s> ERROR UPDATING INSTANCE,AUTOFIX FAILED”
“Verify Instance <%s.%s.%s.%s> Autofix will not change instance size”
“Verify Instance <%s.%s.%s.%s> Dates updated by autofix”
“VERIFY INSTANCE <%s.%s.%s.%s> ERROR UPDATING INSTANCE,AUTOFIX FAILED”
“Class <%s.%s.%s> ZRSCDATE not found but resource flag set in controlinfo”
“Verify Class <%s.%s.%s> cannot read DMA class control information”
“CLASS <%s.%s.%s> CLASS PREFIX SIZE LESS THAN EXPECTED”
“Actual class size <%d>, expected size <%d>“
“Class <%s.%s.%s> prefix contains invalid dates”
“To correct these dates, restart CM Configuration Server withMGR_DB_VERIFY.DB_AUTOFIX set to YES”
“VERIFY CLASS <%s.%s.%s> ERROR VALIDATING CLASS PREFIXDATES”
“CLASS <%s.%s.%s> CLASS PREFIX SIZE <%d> LESS THAN EXPECTED<%d>“
“DATABASE VERSION MISMATCH FOR CLASS <%s.%s.%s>“
“CLASS <%s.%s.%s> TEMPLATE FIRST ENTRY NOT FOUND”
“CLASS <%s.%s.%s> TEMPLATE FIRST ENTRY NAME <%s> DOES NOT MATCH CLASS NAME”
“CLASS <%s.%s.%s> TEMPLATE SIZE MISMATCH”
80 Chapter 2
MessageNumber
NVD4234E
NVD4235E
NVD4236E
NVD4237I
NVD4238E
NVD4239E
NVD4240E
NVD4241I
NVD4242E
NVD4243E
NVD4244E
NVD4245E
NVD4246E
NVD4247E
NVD4248E
NVD4249E
NVD4250E
NVD4251E
NVD4252E
NVD4253E
Log Message
“EXPECTED TEMPLATE SIZE <%d>, ACTUAL SIZE <%d>“
“VERIFY CLASS <%s.%s.%s> ERROR VALIDATING CLASS TEMPLATE”
“DATABASE CLASS <%s.%s.%s> MAY BE CORRUPT”
“Verifying Class <%s.%s.%s>“
“CLASS <%s.%s.%s> CONTAINS INVALID INSTANCE NAME (SEESTDERR)”
“VERIFYING CLASS <%s.%s.%s> TERMINATED BY FindNextInstance(...)RC=%d”
“VERIFY CLASS <%s.%s.%s> INSTANCE FOUND <%ld>, VERIFIED<%ld>, ERRORS <%ld>“
“Verifying Domain <%s.%s>“
“DOMAIN <%s.%s> CONTAINS INVALID CLASS NAME (SEE STDERR)”
“VERIFY DOMAIN <%s.%s> TERMINATED BY FindNextClass(...)RC=<%d>“
“VERIFY CLASS <%s.%s.%s> INSTANCE COUNT IS ZERO”
“VERIFY CLASS <%s.%s.%s> AUTOFIX UNABLE TO DELETE INVALIDCLASS”
“VERIFY CLASS <%s.%s.%s> AUTOFIX DELETED INVALID CLASS”
“VERIFY CLASS <%s.%s.%s> CANNOT VALIDATE DMA INSTANCECOUNT”
“VERIFY CLASS <%s.%s.%s> DMA INSTANCE COUNT DOES NOTEQUALACTUAL INSTANCE COUNT”
“VERIFY CLASS <%s.%s.%s> DMA TotalInstanceCount IS <%ld>,ACTUAL INSTANCE COUNT IS <%ld>“
“VERIFY DOMAIN <%s.%s> CLASSES FOUND <%ld>, VERIFIED <%ld>, ERRORS <%ld>“
“VERIFY DOMAIN <%s.%s> ERROR READING ZBASE CLASS”
“VERIFY DOMAIN <%s.%s> ERROR READING VALIDATING CLASS <%s>“
“DATABASE CLASS <%s.%s.%s> MAY BE CORRUPT”
CM Configuration Server Messages 81
MessageNumber
NVD4254E
NVD4255I
NVD4256I
NVD4257I
NVD4258E
NVD4259E
NVD4260E
NVD4261W
NVD4262E
NVD4263E
NVD4264W
NVD4265E
NVD4266I
NVD4267I
NVD4268E
NVD4269E
NVD4270E
NVD4271I
NVD4272E
NVD4273I
Log Message
“DOMAIN <%s.%s> CM CONFIGURATION SERVER ID DOES NOT MATCH WHAT IS IN PROFILE”
“CM Configuration Server ID in Profile ==> <%s>“
“CM Configuration Server ID in Database ==> <%s>“
“Please change the CM Configuration Server ID in the Profile”
“MANAGING CM CONFIGURATION SERVER ID <%s> AND CM CONFIGURATION SERVER ID <%s>“
“SHOULD BE DIFFERENT FOR THE SERVER-TYPE OF CM CONFIGURATION SERVER”
“SHOULD BE THE SAME FOR STANDALONE CM CONFIGURATIONSERVER”
“Verify Domain <%s.%s.%s> cannot validate DMA instance count”
“VERIFY DOMAIN <%s.%s> DMA INSTANCE COUNT DOES NOTEQUAL ACTUAL INSTANCE COUNT”
“VERIFY DOMAIN <%s.%s> TotalInstanceCount IS <%ld>, actual instancecount is <%ld>“
“Verify Domain <%s.%s.%s> cannot validate DMA instance count”
“VERIFY DOMAIN <%s.%s> CLASSES COUNT DOESN'T EQUALACTUAL CLASS COUNT”
“Verify Domain DMA TotalClassCount is <%ld>, actual class count is <%ld>“
“Verifying File <%s>“
“FILE <%s> CONTAINS INVALID DOMAIN NAME (SEE STDERR)”
“VERIFY FILE <%s.%s> TERMINATED BY FindNextDomain(...)RC=<%d>“
“ERROR READING <%-s> CONTROL CLASS FOR FILE <%-s>“
“Please use ZEDMAMS to convert the <%-s> file”
“VERIFY FILE <%s> CHECKED <%ld> DOMAINS, FOUND <%ld> ERRORS”
“Verify File <%s> checked <%ld> domains, found <%ld> errors”
82 Chapter 2
MessageNumber
NVD4274I
NVD4275I
NVD4276E
NVD4277E
NVD4278E
NVD4279E
NVD4280I
NVD4281E
NVD4282I
NVD4283E
NVD4284I
NVD4285E
NVD4286I
NVD4287E
NVD4288I
NVD4289E
NVD4290I
NVD4291E
NVD4292I
NVD4293E
NVD4294I
NVD4295W
Log Message
“Verify File <%-s> autofix <%c> using ZEDMAMS <%-s> in progress...”
“Verify File <%-s> autofix ZEDMAMS REFRESH_DMA ended with rc <%ld>“
“INVALID FILE NAME (SEE STDERR)”
“VERIFY FILE <%s.%s> TERMINATED BY FindNextFile(...) RC=%d”
“DATABASE HAS <%ld> FILES WITH ERRORS”
“VERIFY DATABASE FILES - FOUND <%ld>, CHECKED <%ld>“
“Verify Database Files - Found <%ld>, checked <%ld>“
“VERIFY DATABASE FILES - FILE SPECIFIC ERRORS <%ld>,AUTOFIXED <%ld>“
“Verify Database Files - file specific errors <%ld>, autofixed <%ld>“
“VERIFY DATABASE DOMAINS - FOUND <%ld>, CHECKED <%ld>“
“Verify Database Domains - Found <%ld>, checked <%ld>“
“VERIFY DATABASE DOMAINS - DOMAIN SPECIFIC ERRORS <%ld>,AUTOFIXED <%ld>“
“Verify Database Domains - Domain specific errors <%ld>, autofixed <%ld>“
“VERIFY DATABASE CLASSES - FOUND <%ld>, CHECKED <%ld>“
“Verify Database Classes - Found <%ld>, checked <%ld>“
“VERIFY DATABASE CLASSES – CLASS SPECIFIC ERRORS <%ld>, AUTOFIXED <%ld>“
“Verify Database Classes - Class specific errors <%ld>, autofixed <%ld>“
“VERIFY DATABASE INSTANCES - FOUND <%ld>, CHECKED <%ld>“
“Verify Database Instances - Found <%ld>, checked <%ld>“
“VERIFY DATABASE INSTANCES - DOMAIN SPECIFIC ERRORS <%ld>,AUTOFIXED <%ld>“
“Verify Database Instances - Domain specific errors <%ld>, autofixed<%ld>“
“Database Verification rc <%ld>, autofix retry in progress”
CM Configuration Server Messages 83
Log Message
“DATABASE VERIFICATION AUTOFIX RETRY ENDED WITH RC <%ld>“
“Database Verification autofix retry ended with rc <%ld>“
“DATABASE VERIFICATION ENDED WITH RC <%ld>“
“Database Verification ended with rc <%ld>“
4300-4399 Database
“Verify Class <%s.%s.%s> instances found <%ld>, verified <%ld>, errors <%ld>“
“Verify Domain <%s.%s> classes found <%ld>, verified <%ld>, errors <%ld>“
“Verify Instance <%s.%s.%s.%s> mismatched CM Configuration Server ID with instance objid <%12.12s>”
“Verify Instance <%s.%s.%s.%s> mismatched instance objcid <%12.12s> andclass objid <%12.12s>”
“%s *%.*s*”
5000-5099 Variable Substitution
“SUBSTITUTION ERROR RC = <%d>“
“SUBSTITUTION VALUE TRUNCATE <%s.%s> <%d> ACTUAL <%d> ALLOCATED <%d> <%s>“
“Substituted Value <%8.8s.%8.8s> <%d> ACTUAL <%d> ALLOCATED<%d> <%s>“
“Substitution Closing Brace not found ...: <%s>“
“Passing to Substitution...: <%s>“
“Back from Substitution...: %d <%s>“
“SUBSTITUTION BUFFER OVERFLOW”
“SUBSTITUTION BUFFER TRUNCATED”
“Substitution needed again, depth %d <%s>“
“After Substitution <%s>“
“Passed to Substitution ..: <%s>“
MessageNumber
NVD4296E
NVD4297I
NVD4298E
NVD4299I
NVD4300I
NVD4301I
NVD4302W
NVD4303W
NVD4304I
NVD5001E
NVD5002E
NVD5003I
NVD5004I
NVD5005I
NVD5006I
NVD5007E
NVD5008E
NVD5009I
NVD5010I
NVD5011I
84 Chapter 2
MessageNumber
NVD5012E
NVD5013E
NVD5014E
NVD5015I
NVD5016I
NVD5017I
NVD5018E
NVD5019I
NVD5020I
NVD5021I
NVD5022E
NVD5023W
NVD5024W
NVD5025E
NVD5026I
NVD5027I
NVD5028E
NVD5029E
NVD5030E
NVD5031I
NVD5032I
NVD5033E
NVD5034E
Log Message
“INVALID SUBSTITUTION SYNTAX <%s>“
“ERROR IN SUBSTITUTION <%s>“
“SUBSTITUTION BUFFER OVERFLOWS <%s>“
“<%s>“
“Variable not found <%s>“
“Truncated Value during Substitution”
“INVALID SUBSTITUTION VARIABLE <%s> FOR OBJECT <%s>“
“Variable not found <%s> <%s>“
“Variable <%8.8s> not found in <%8.8s>“
“GET <%8.8s.%8.8s> <%d> <%d> <%s>“
“VALUE TRUNCATED <%8.8s.%8.8s> <%d> ACTUAL <%d> ALLOCATED<%d> <%s>“
“SBUFFER <%s> length = <%d>“
“VALUE <%s> length = <%d>“
“SUBSTITUTION FAILED <%s>“
“Substituting <%s>“
“Substituted value <%s>“
“UNRESOLVED VARIABLE LIST <%s>“
“SUBSTITUTION VALUE TRUNCATED ACTUAL <%d>ALLOCATED<%d>“
“SUBSTITUTION VALUE TRUNCATED <%8.8s.%8.8s> <%d> ACTUAL<%d> ALLOCATED <%d> <%s>“
“Protected field <%s> will not be returned”
“Protected field <%s> will not be unloaded”
“SUBSTITUTION FAILED BECAUSE RECURSION LIMIT OF <%d> REACHED”
“INVALID SUBSTITUTION OBJECT <%s>“
CM Configuration Server Messages 85
Log Message
“INVALID SUBSTITUTION HEAP <%s> FOR OBJECT <%s> VARIABLE<%s>“
“UNABLE TO PROCESS CLASS CONNECT OPTIONS <%s>, CONNECTION REJECTED”
“CLASS CONNECT CONDITIONS <%s> ARE NOT WELL-FORMED,CONNECTION REJECTED”
“SUBSTITUTION ERROR RC %d %s”
“SUBSTITUTION VALUE TRUNCATED I <%d> O <%d>”
“Reset DOMAIN after Method D= %s M= %s”
5100-5199 Instances
“Dynamic INSTANCE Length <%d> at <%x>“
“BASE INSTANCE No Inherit Requested”
“INSTANCE <%s.%s.%s.%s> IS 0 BYTES LONG”
“Using Base Instance Date/Time”
“Instance not found <%s>“
“%s. Domain.Instance = <%s.%s>“
“'%s' INSTANCE <%d> at <%p>“
“'%8.8s' INSTANCE <%d> at <%p>“
“ERROR PROCESSING INSTANCES”
“ERROR GETTING INSTANCE (%d BYTES) FROM <%s.%s.%s> RC=<%d>“
“ERROR <RC=%d> BUILDING PATCH INSTANCE <%s.%s.%s.%s>“
“ERROR <RC=%d> CREATING RESOURCE INSTANCE <%s.%s.%s.%s>“
“ERROR <RC=%d> CREATING INSTANCE <%s.%s.%s.%s>“
“BASE INSTANCE ALREADY EXISTS <%s.%s.%s.%s>“
“ERROR <RC=%d> WRITING BASE INSTANCE <%s.%s.%s.%s>“
“INSTANCE ALREADY EXISTS <%s.%s.%s.%s>“
MessageNumber
NVD5035E
NVD5036E
NVD5037E
NVD5038E
NVD5039E
NVD5040I
NVD5101I
NVD5102I
NVD5103E
NVD5104I
NVD5105I
NVD5106I
NVD5107I
NVD5108I
NVD5109E
NVD5110E
NVD5111E
NVD5112E
NVD5113E
NVD5114E
NVD5115E
NVD5116E
86 Chapter 2
Log Message
“ERROR OPENING INSTANCES <%s.%s.%s.%s>“
“ERROR UNMATED INSTANCE <%s.%s.%s.%s>“
“ERROR INSTANCE <%s.%s.%s.%s> HAS INVALID DATA; THEREFOREUNMATED”
NVD5120E “ERROR INSTANCE <%s.%s.%s.%s> SIZE LESS THAN MINIMUMREQUIRED”
NVD5121I “Actual instance size <%d>, minimum instance size <%d>“
“INSTANCE <%s.%s.%s.%s> INSTANCE PREFIX TIME <%-8.8s> IS INVALID”
“INSTANCE <%s.%s.%s.%s> DOES NOT MATCH CLASS TEMPLATE”
“Actual instance size <%d>, expected instance size <%d>“
5200-5299 Objects and Variables
“ERROR, UNABLE TO FIND OBJECT <%s>“
“ERROR, UNABLE TO FIND PARENT OBJECT”
“ERROR, UNABLE TO PROCESS OBJECT <%s>“
“VARGET ERROR FOR <%s> IN <%s>“
“ERROR, UNABLE TO FIND VARIABLE <%s.%s>“
“ERROR, UNABLE TO GET VARIABLE <%s.%s>“
“ERROR, UNABLE TO GET TEMPLATE”
“ERROR, UNABLE TO GET HEAP <%d> FOR OBJECT <%s>“
“ERROR, UNABLE TO GET OBJECT <%s>“
“ERROR, UNABLE TO PUT VARIABLE <%s.%s>“
“ERROR, UNABLE TO PUT OBJECT <%s>“
“ERROR, INVALID OBJECT NAME <%s>“
“ERROR, INVALID VAR NAME <%s>“
“VARIABLE NOT FOUND <%s.%s>“
“COMPOBJ - OBJECT NOT FOUND”
MessageNumber
NVD5117E
NVD5118E
NVD5119E
NVD5122E
NVD5123E
NVD5124I
NVD5201E
NVD5202E
NVD5203E
NVD5204E
NVD5205E
NVD5206E
NVD5207E
NVD5208E
NVD5209E
NVD5210E
NVD5211E
NVD5212E
NVD5213E
NVD5214E
NVD5215E
CM Configuration Server Messages 87
MessageNumber
NVD5216E
NVD5217I
NVD5218I
NVD5219E
NVD5220E
NVD5221I
NVD5222E
NVD5223E
NVD5224E
NVD5225E
NVD5226E
NVD5227E
NVD5228E
NVD5229E
NVD5230E
NVD5231E
NVD5232E
NVD5233E
NVD5234I
NVD5235E
NVD5236E
NVD5237E
NVD5238E
NVD5239E
NVD5240I
NVD5241E
Log Message
“ERROR INITIALIZING OBJECT <%s>“
“OBJECT Variable <%s> Length is 0 - Ignored”
“Delete variable <%0.8s.%0.8s>“
“DELETE VARIABLE - OBJECT <%0.8s> NOT FOUND”
“DELETE VARIABLE - VARIABLE <%0.8s.%0.8s> NOT FOUND”
“Starting OBJECT: <%s>“
“VARGET ERROR DMATIME NOT FOUND”
“VARGET ERROR DMAQTYPE NOT FOUND”
“VARGET ERROR DMAMGRID NOT FOUND”
“ERROR DMAMGRID DOES NOT VERIFY”
“VARGET ERROR ZOBJFILE NOT FOUND FOR <%s>“
“VARGET ERROR ZOBJDOMN NOT FOUND FOR <%s>“
“VARGET ERROR ZOBJCLAS NOT FOUND FOR <%s>“
“VARGET ERROR ZACTION NOT FOUND FOR <%s>“
“VARGET ERROR ZEDMTYPE NOT FOUND FOR <%s>“
“VARGET ERROR ZOBJNAME NOT FOUND FOR <%s>“
“VARGET ERROR ZOBJID NOT FOUND FOR <%s>“
“ERROR ZEDMTYPE <%s> INVALID FOR ACTION <%s>“
“Starting OBJ: <%8.8s>“
“VARGET ERROR ZRSCMFIL NOT FOUND FOR <%8.8s>“
“VARGET ERROR <%s> NOT FOUND FOR <%8.8s>“
“INVALID ZEDMTYPE <%s>“
“INVALID CHARACTER IN VAR NAME <%s>“
“ZTVARQ = NULL”
“Variable Server - <%8.8s> OBJECT not found”
“MISSING <%8.8s> VARIABLE IN <%s>“
88 Chapter 2
MessageNumber
NVD5242I
NVD5243E
NVD5244E
NVD5245E
NVD5246E
NVD5247E
NVD5248E
NVD5249E
NVD5250I
NVD5251I
NVD5252I
NVD5253I
NVD5254I
NVD5255I
NVD5256I
NVD5257I
NVD5258E
NVD5259I
NVD5260I
NVD5261I
NVD5262I
NVD5263I
NVD5264E
NVD5265I
NVD5266I
Log Message
“%s: ztvarq <%08X>, zqhead <%08X>, zqtail <%08X>“
“%s: TAIL ZPCB NOT FREED <%08X>“
“%s: HEAD ZPCB NOT FREED <%08X>“
“VARIABLE LENGTH <%d> EXCEEDS LIMIT <%d>“
“OBJECT <%s> VARIABLE <%s>“
“ERROR INITIALIZING OBJECT <%s>“
“UNABLE TO PACK OBJECTID <%s> FOR <%s>.<%s>“
“UNABLE TO PACK CRC <%s> FOR <%s>.<%s>“
“%s started at <%2.2d:%2.2d:%2.2d:%3.3d>“
“%s completed at <%2.2d:%2.2d:%2.2d:%3.3d>“
“%s (V4.0 or newer) started at <%2.2d:%2.2d:%2.2d:%3.3d>“
“%s (Pre V4.0) started at <%2.2d:%2.2d:%2.2d:%3.3d>“
“Object exchange ended”
“ADD <%8.8s.%8.8s> <%d> <%d> <%s>“
“MOVE <%8.8s.%8.8s> <%d> <%d> <%s>“
“Template size mismatch A<%d> Allocated <%d>“
“TEMPLATE SIZE EXCEEDS ALLOCATED SPACE ACTUAL <%d> ALLOC <%d>“
“Template copied to <%08X>, length <%d>“
“Freeing saved template @ <%08X>, length <%d>“
“Recd. <%s>“
“Template Length <%d> bytes”
“Template <%d>“
“ZPCB NOT FOUND FOR OBJECT <%s>“
“%s.%s Variable Value _UNDEF_ - Variable not Put”
“<%8.8s.%8.8s> Variable Value _UNDEF_ - Variable not Put “
CM Configuration Server Messages 89
MessageNumber
NVD5267I
NVD5268I
NVD5269I
NVD5270E
NVD5271W
NVD5272W
NVD5273E
NVD5274E
NVD5275E
NVD5276E
NVD5277E
NVD5278E
NVD5279E
NVD5280E
NVD5281E
NVD5282E
NVD5283E
NVD5284E
NVD5285E
NVD5286E
NVD5287E
NVD5288E
NVD5289W
NVD5290E
Log Message
“*********NOT USED **************”
“PUT <%8.8s.%8.8s> <%d> <%d> <%s>“
“Delete all requires lists starting”
“DELETING REQUIRES LIST FROM <%s>“
“NONDIGIT in cumulative variable <%8.8s> - treating as regular variable”
“Overflow Condition on cumulative variable <%8.8s>“
“ERROR ADDING NEW VARIABLE <%s> TO OBJECT <%s> HEAP <%d>“
“VARPUT ERROR IN <%s> <%s>“
“VARGET ERROR ZRSCSTYP NOT FOUND FOR <%s>“
“VARGET ERROR ZRSCCFIL NOT FOUND FOR <%s>“
“ERROR GETTING VARIABLES FOR OBJECT <%s>“
“ERROR REQUIRED VARIABLES NOT FOUND IN TEMPLATE <%s>“
“VARGET ERROR ZADMCLAS NOT FOUND FOR <%s>“
“VARGET ERROR ZADMINST NOT FOUND FOR <%s>“
“ERROR, MISSING KEY VARIABLE 'ZRSCSTYP' FROM CLASS<%s>.<%s>.<%s>“
“VARGET ERROR <%s> NOT FOUND IN <%s>“
“VARPUT ERROR RC<%d> PUTTING VARIABLE <%8.8s> INTO OBJECT<%8.8s> IN HEAP <%d>“
“ERROR GETTING VARIABLE FROM OBJECT <%s>“
“ERROR RC<%d> GETTING VARIABLE <%8.8s> FROM OBJECT<%8.8s>“
“VARPUT ERROR FOR <%8.8s> IN <%s>“
“VARPUT ERROR ZLUNAME INTO ZMASTER”
“VARPUT ERROR ZIPNAME INTO ZMASTER”
“Missing <%s> variable in <%8.8s>“
“<%s> VARIABLE IS ALL BLANKS IN <%8.8s> INSTANCE #<%d>“
90 Chapter 2
Log Message
“INVALID <%s> VALUE IN <%8.8s> INSTANCE #<%d>“
“PUT_VAR ERROR O<%s> V<%s>“
“ERROR DURING VARPUT”
“%s *%.*s*”
“ERROR TRANSLATING DATA FOR INBOUND OBJECT <%8.8s>,ATTRIBUTE <%8.8s>, HEAP <%lu>, FROM <%s> TO <%s>”
“ERROR, TRANSLATION BUFFER TOO SMALL, SPECIFIED SIZE <%lu>, REQUIRED SIZE <%lu>”
“ERROR, ACTUAL DATA SIZE <%lu> BYTES EXCEEDS MAXIMUM<%lu>, TRUNCATED DATA LOST <%s>”
“ERROR, DATA TRUNCATED TO <%lu> BYTES, <%s>”
5300-5399 Object Processing
“VERSION OBJECT Processing Begins: <%s>“
“GENERIC OBJECT Processing Begins: <%s>“
“HIDDEN GROUP OBJECT Processing Begins: <%s>“
“Termination requested”
“PUT-OBJECT control object: <%8.8s> Instance: <%08.8d>“
“PUT-OBJECT: <%8.8s>, id: <%12.12s>, pid: <%12.12s>, name: <%s>“
“PUT-OBJECT: <%8.8s> Instances Filtered by %s: <%12.12s>“
“PUT-OBJECT: <%8.8s> All Instance Selected”
“PUT-OBJECT: No Instances found for parent ID <%s>“
“PUT-OBJECT: No Instances found for parent ID <%s> that were updatedafter <%s> <%s>“
“PUT-OBJECT select objid: <%12.12s> actual: <%12.12s> <%d>“
“PUT-OBJECT select parent ID: <%12.12s> actual: <%12.12s> <%d>“
“PUT-OBJECT major objname: <%s> <%d>“
“PUT-OBJECT hidden resource <%s>“
MessageNumber
NVD5291E
NVD5292E
NVD5293E
NVD5294I
NVD5295E
NVD5296E
NVD5298E
NVD5299E
NVD5301I
NVD5302I
NVD5303I
NVD5304I
NVD5305I
NVD5306I
NVD5307I
NVD5308I
NVD5309I
NVD5310I
NVD5311I
NVD5312I
NVD5313I
NVD5314I
CM Configuration Server Messages 91
MessageNumber
NVD5315E
NVD5316E
NVD5317I
NVD5318E
NVD5319I
NVD5320E
NVD5321I
NVD5322I
NVD5323I
NVD5324E
NVD5325E
NVD5326I
NVD5327I
NVD5328E
NVD5329E
NVD5330E
NVD5331E
NVD5332E
NVD5333E
NVD5334I
NVD5335E
NVD5336I
NVD5337E
NVD5338I
NVD5339I
Log Message
“PUT-OBJECT ERROR - REQUESTED OBJECTID NOT FOUND”
“ERROR IN NADAOBJ <%d>“
“ZPUTOBJ Confirmed”
“PUT-OBJECT - RESTART OFFSET NON-NUMERIC IN RESOURCERESTART REQUEST”
“Request file restart offset: <%d>“
“PUT-OBJECT REQUESTED OBJID NOT FOUND”
“<ZRSCMMEM> not found for object <%s>“
“Honoring RESTART %d”
“Get-Storage starting Object: <%8.8s>“
“PUT-OBJECT - UNABLE TO PROCESS STORAGE OBJECT”
“ERROR SENDING DYNAMIC OBJECT <%8.8s>“
“Get-Database Object Starting”
“Get-Database Object Ending”
“GET-DATABASE OBJECT ERROR”
“PUT-OBJECT OBJECTID FORMAT ERROR <%12.12s>“
“PUT-OBJECT <%s> - OBJECT NOT FOUND”
“OBJECT NOT FOUND <%s>“
“GET OBJECT ERROR - NO HEAPS OR ERROR RECEIVING DATA”
“MISSING OBJECT <%s>“
“Deleting %s object <%s>“
“BLANK OBJECT NAME”
“%s: Delete All Objects has started”
“%s: DELETE ALL OBJECTS - NO OBJECTS FOUND”
“Delete Object Instance starting”
“OBJECT - <%s> HEAP - <%d>“
92 Chapter 2
MessageNumber
NVD5340E
NVD5341I
NVD5342I
NVD5343E
NVD5344I
NVD5345E
NVD5346E
NVD5347I
NVD5348E
NVD5349W
NVD5350I
NVD5351E
NVD5352E
NVD5353E
NVD5354E
NVD5355E
NVD5356E
NVD5357E
NVD5358E
NVD5359I
NVD5360I
NVD5361I
NVD5362I
NVD5363I
NVD5364E
Log Message
“DELETE OBJECT INSTANCE - OBJECT NOT FOUND”
“(Obj) <%8.8s> (Typ) <%8.8s> (Len) <%d>“
“Object <%8.8s> Template <%d> Heap <%d>“
“GETBLK ERROR”
“OBJECT ID match not found”
“SOURCE OBJECT NOT FOUND <%8.8s>“
“DESTINATION OBJECT NOT FOUND <%8.8s>“
“Source OBJECT <%8.8s> @ %x ; Destination OBJECT <%8.8s> @ %x”
“NO HEAP FOR OBJECT <%8.8s>“
“Cleanup object not found <%8.8s>“
“FREE Directory at <%p>“
“DESTINATION OBJECT ERROR - VALUE NULL”
“INVALID DESTINATION OBJECT NAME (Null)”
“INVALID DESTINATION OBJECT NAME (Blanks)”
“SOURCE OBJECT ERROR”
“INVALID SOURCE OBJECT NAME (Null)”
“INVALID SOURCE OBJECT NAME (Blanks)”
“HEAP NOT FOUND FOR DESTINATION OBJECT”
“NO HEAPS FOUND FOR SOURCE OBJECT”
“PUT-OBJECT: No Instances found for object id <%s>“
“PUT-OBJECT: No Instances found for object id <%s> that were updated after <%s> <%s>“
“PUT-OBJECT: No Instances found for parent id <%s>, object id <%s>“
“PUT-OBJECT: No Instances found for parent id <%s>, object id <%s>, that were updated after <%s> <%s>“
“PUT-OBJECT: No Instances found that were updated after <%s> <%s>“
“ERROR CREATING OBJECT FOR <%s.%s.%s.%s>“
CM Configuration Server Messages 93
MessageNumber
NVD5365E
NVD5366E
NVD5367I
NVD5368I
NVD5369E
NVD5370E
NVD5371I
NVD5372I
NVD5373I
NVD5374I
NVD5375I
NVD5376I
NVD5377E
NVD5378I
NVD5379I
NVD5380W
NVD5381I
NVD5382I
NVD5383E
NVD5384I
NVD5385I
NVD5386I
NVD5387E
NVD5388E
NVD5389E
Log Message
“ERROR LOCATING PARENT OBJECT <%8.8s>“
“ERROR LOCATING ZCLIST FOR <%8.8s>“
“Listing ILISTs for all heaps of <%8.8s>“
“%8.8s ILIST for heap:<%d>, parentid:<%12.12s>, date/time:<%8.8s/%8.8s>,children#:<%d>“
“ERROR LOCATING ZILIST FOR <%8.8s>“
“ERROR LOCATING ZCLIST FOR PARENT/CHILD: <%8.8s / %8.8s>“
“Updating child date/time entry for <%s> <%8.8s>“
“%8.8s %8.8s”
“Checking for requires crc”
“Checking for includes objectid”
“Cannot add OBJECTID to ZOBJVPID”
“User: <%s> Connect message: <%s>“
“ERROR PUTTING OBJECT”
“Master Object exchange ended”
“Configuration Unchanged -- Deleted ZRSOURCE object”
“Configuration Unchanged -- ZRSOURCE object deletion failed, rc = <%d>“
“Free unused pool elements requested by <%-8.8s>“
“Filtering by ZOBJPID <%12.12s>“
“ERROR EXCHANGING OBJECT <%s>“
“Deleting request object <%s>“
“Deleting control object <%s>“
“%8.8s %04d: Child <%8.8s> Count <%8.8s> Crc <%8.8s> Date <%8.8s> Time <%8.8s>“
“ZOBJVERS ITEM IS ALL BLANK “
“ZOBJVERS ITEM DOES NOT MATCH RULE <%s>“
“ZOBJVERS SUCCESS “
94 Chapter 2
Log Message
“Configuration Unchanged -- ZERASE=<%s>, ZRSOURCE object was notdeleted”
NVD5391I “Processing <object_name>, heap size: <heap_size>, total number of heaps: <max_heap>“
NVD5392I “<%s %s(%12.12s) heap(%03d)”
“ICONV TRANSLATION ERROR <%d - %s>”
“ERROR, UNABLE TO TRANSLATE CHARACTER <0x%02X>BEGINNING AT OFFSET <%d>”
“ERROR TRANSLATING DATA FOR OUTBOUND OBJECT <%8.8s>, ATTRIBUTE <%8.8s>, HEAP <%lu>, FROM <%s> TO <%s>”
“ERROR, TRANSLATION BUFFER TOO SMALL, SPECIFIED SIZE <%lu>, REQUIRED SIZE <%lu>”
“ERROR, ACTUAL DATA SIZE <%lu> BYTES EXCEEDS MAXIMUM<%lu>, TRUNCATED DATA LOST <%s>”
“ERROR, DATA TRUNCATED TO <%lu> BYTES, <%s>”
5400-5499 Resource
“Warning - RESOURCE Size (ZRSCSIZE) NON-NUMERIC <%s> Length <%d>“
“Warning - RESOURCE has ZRSCSIZE=0 RESOURCE: <%s>“
“RESOURCE <%s>“
“MISSING RESOURCE <%s> DOMAIN <%s> CLASS <%s>“
“ERROR LOCKING RESOURCE <%s>“
“Warning - ACTUAL DATA for Resource does NOT match ZRSCSIZE”
“ZRSCSIZE: <%d>, ACTUAL: <%d> OFFSET: <%d>“
“ERROR UNLOCKING RESOURCE <%s>“
“ERROR LOCKING RESOURCE <%s.%s.%s.%s>“
“ERROR WRITING RESOURCE PREFIX <%s.%s.%s.%s>“
“ERROR WRITING RESOURCE FILE <%s.%s.%s.%s>“
MessageNumber
NVD5390I
NVD5393E
NVD5394E
NVD5395E
NVD5396E
NVD5398E
NVD5399E
NVD5401W
NVD5402W
NVD5403I
NVD5404E
NVD5405E
NVD5406W
NVD5407W
NVD5408E
NVD5409E
NVD5410E
NVD5411E
CM Configuration Server Messages 95
MessageNumber
NVD5412E
NVD5413E
NVD5414E
NVD5415E
NVD5416E
NVD5417E
NVD5418E
NVD5419E
NVD5420E
NVD5421I
NVD5422I
NVD5423I
NVD5424E
NVD5425I
NVD5426I
NVD5427I
NVD5428E
NVD5429I
NVD5430W
NVD5431I
Log Message
“ERROR OPENING RESOURCE <%s.%s.%s.%s>“
“ERROR READING PREFIX FOR RESOURCE <%s.%s.%s.%s>“
“RESOURCE <%s.%s.%s.%s> PREFIX SIZE <%lu> IS SMALLER THANEXPECTED <%lu>“
“RESOURCE <%s.%s.%s.%s> PREFIX CLASS NAME <%8.8s> DOES NOTMATCH”
“RESOURCE <%s.%s.%s.%s> PREFIX INSTANCE NAME <%32.32s> DOES NOT MATCH <%32.32s>“
“ERROR, ASSOCIATED RESOURCE <%s.%s.%s.%s> HAS INVALID SIZE <%lu>“
“RESOURCE <%s.%s.%s.%s> ACTUAL SIZE <%lu> IS NOT EQUAL TO PREFIX RESOURCE SIZE <%lu>“
“RESOURCE <%s.%s.%s.%s> %s <%lu> IS NOT EQUAL TO PREFIX RESOURCE SIZE <%lu>“
“RESOURCE <%s.%s.%s.%s> CRC <%.*s> IS NOT EQUAL TO PREFIXRESOURCE CRC <%.*s>“
“Copying file <%s> to <%s.%s.%s.%s>“
“Bytes read <%lu>, bytes written <%lu>“
“Copy file <%s> to <%s.%s.%s.%s> completed successfully”
“COPY FILE <%s> TO <%s.%s.%s.%s> FAILED”
“Imploding file <%s> to <%s.%s.%s.%s>“
“Implode file bytes read <%lu>, bytes written <%lu>“
“Implode file <%s> to <%s.%s.%s.%s> completed successfully”
“IMPLODE FILE <%s> TO <%s.%s.%s.%s> FAILED”
“Patch Size <%lu>, 'TO' Resource Size <%lu>, Max Patch Size <%lu>, Max Patch Percent <%lu>“
“Patch <%s.%s.%s.%s> deleted because it does not meet patch size limitingcriteria”
“Copying <%s.%s.%s.%s> to file <%s>“
96 Chapter 2
MessageNumber
NVD5432I
NVD5433I
NVD5434E
NVD5435I
NVD5436I
NVD5437I
NVD5438E
NVD5439E
NVD5440I
NVD5441E
NVD5442E
NVD5443W
NVD5444I
NVD5445E
NVD5446W
NVD5447I
NVD5448E
NVD5449E
NVD5450I
NVD5451I
NVD5452I
NVD5453I
Log Message
“Bytes read <%lu>, bytes written <%lu>“
“Copy <%s.%s.%s.%s> to file <%s> completed successfully”
“COPY <%s.%s.%s.%s> TO FILE <%s> FAILED”
“Exploding <%s.%s.%s.%s> to file <%s>“
“Bytes read <%lu>, bytes written <%lu>“
“Explode <%s.%s.%s.%s> to file <%s> completed successfully”
“EXPLODE <%s.%s.%s.%s> TO FILE <%s> FAILED”
“PATCH BUILD FAILED, RC <%d>, DURATION <%1.3f> SECONDS, FOR <%s.%s.%s.%s>“
“Patch build complete, rc <%d>, duration <%1.3f> seconds, for <%s.%s.%s.%s>“
“ERROR READING 'FROM' INSTANCE <%s.%s.%s.%s>“
“ERROR READING 'TO' INSTANCE <%s.%s.%s.%s>“
“GET INSTANCE <%s.%s.%s.%s>, VARIABLE <%0.*s>, SIZE <%1.3d>,VALUE <%0.*s> TRUNCATED TO <%0.*s>“
“Get instance <%s.%s.%s.%s>, variable <%0.*s>, size <%1.3d>, value <%0.*s>“
“GET INSTANCE <%s.%s.%s.%s>, VARIABLE <%0.*s>, NOT FOUND”
“PUT INSTANCE <%s.%s.%s.%s>, VARIABLE <%0.*s>, SIZE <%1.3d>,VALUE <%0.*s> TRUNCATED TO <%0.*s>“
“Put instance <%s.%s.%s.%s>, variable <%0.*s>, size <%1.3d>, value <%0.*s>“
“PUT INSTANCE <%s.%s.%s.%s>, VARIABLE <%0.*s>, NOT FOUND”
“ERROR READING INSTANCE <%s.%s.%s.%s>“
“Patch build started for <%s.%s.%s.%s>“
“Read Class <%s.%s.%s.%s>, size <%d>, successful”
“Read Instance <%s.%s.%s.%s>, size <%d>, successful”
“Write Instance <%s.%s.%s.%s>, size <%d>, successful”
CM Configuration Server Messages 97
MessageNumber
NVD5454E
NVD5455E
NVD5456I
NVD5457I
NVD5458I
NVD5459I
NVD5460I
NVD5461E
NVD5462I
NVD5463E
NVD5464I
NVD5465E
NVD5466W
NVD5467E
NVD5468E
NVD5469E
NVD5470E
NVD5471E
NVD5472E
NVD5473E
NVD5474E
NVD5475E
NVD5476E
NVD5477E
Log Message
“CANNOT OBTAIN PATCH 'FROM' FILE INFORMATION FOR <%s>“
“CANNOT OBTAIN PATCH 'TO' FILE INFORMATION FOR <%s>“
“FROM file <%s>, size <%lu>“
“TO file <%s>, size <%lu>“
“PATCH file <%s>“
“File contents are identical, no patch built”
“PATCH file <%s> created, size <%lu>“
“CANNOT OBTAIN 'PATCH' FILE INFORMATION FOR <%s>“
“Patch build queue request for <%s.%s.%s.%s>“
“PATCH BUILD QUEUE REQUEST FAILED, RC <%d>, DURATION<%1.3f> SECONDS, FOR <%s.%s.%s.%s>“
“Patch build queue request complete, rc <%d>, duration <%1.3f> seconds,for <%s.%s.%s.%s>“
“PATCH 'TO' FILE IS TOO SMALL, <%lu> BYTES, NO PATCH BUILT FOR <%s>“
“Warning - RESOURCE Size (ZCMPSIZE) NON-NUMERIC <%s> Length <%d>“
“MISSING FILE NAME <%0.8s.%0.8s>”
“MISSING DOMAIN NAME <%0.8s.%0.8s>”
“MISSING CLASS NAME <%0.8s.%0.8s>”
“MISSING SERVICE OBJECT ID <%0.8s.%0.8s>”
“MISSING SOURCE INSTANCE NAME <%0.8s.%0.8s>”
“MISSING DESTINATION INSTANCE NAME <%0.8s.%0.8s>”
“CANNOT BUILD PATCH FOR THE SAME INSTANCE NAMES <%s>”
“FILE NOT FOUND <%s>”
“DOMAIN NOT FOUND <%s.%s>”
“CLASS NOT FOUND <%s.%s.%s>”
“INSTANCE NOT FOUND <%s.%s.%s.%s>”
98 Chapter 2
Log Message
“ERROR <%d> RENAMING OBJECT <%s> TO <%s>”
“ERROR <%d> SORTING OBJECT <%s> BY <%s>”
“%s: ERROR <%d> GETTING ZRSCCFIL FROM PATCH_S OBJECT”
“%s: ERROR <%d> GETTING ZRSCCFIL FROM PATCH_T OBJECT”
“%s: ERROR <%d> COPYING VARS FROM PATCH_T TO PATCHDUPOBJECT”
“Resolving <%s>”
“%s: ERROR <%d> GETTING OBJECT <%s> HEAP <%d> VARIABLE<%0.8s>”
“%s: ERROR <%d> SETTING OBJECT <%s> HEAP <%d> VARIABLE<%0.8s> TO <%s>”
5800-5899 PROC_API
“%s: version <%4.4s>, reqname <%6.6s>, flag 0x%02X, object <%s>,varname <%s>, heapno <%lu>, length <%u>, retcode <%d>, buflen <%u>“
“INVALID REQUEST <%6.6s>“
“EDMGET O<%s> VN<%s> (L)<%d> V<%s>“
“EDMGTR: Object<%s> Varname<%s> Heap<%d>“
“EDMGTR: retcode <%ld>, actual size <%ld>, heapno <%ld>“
“EDMGTR: retcode <%ld>, actual size <%ld>, heapno <%ld>“
“EDMRFC CACHE CLOSED - CANNOT REFRESH”
“EDMUPC * Updating %s”
“EDMCLOSE”
“EDMZRM <%s>“
“EDMZRM ZERRORM HEAP NOT PUT”
“EDMSMT <%s>“
“EDMOID <%s>“
“TOO MANY STRINGS PASSED”
MessageNumber
NVD5478E
NVD5479E
NVD5480E
NVD5481E
NVD5482E
NVD5483I
NVD5484E
NVD5485E
NVD5800I
NVD5801E
NVD5802I
NVD5803I
NVD5804I
NVD5805W
NVD5806E
NVD5807I
NVD5808I
NVD5809I
NVD5810E
NVD5811I
NVD5812I
NVD5813E
CM Configuration Server Messages 99
Log Message
“EDMLGF <%s>“
“EDMLGS <%s>“
“EDMGTD <%s>“
“EDMGTT <%s>“
“EDMNTO Class size <%d>“
“EDMKLT <%s>“
“EDMGCC <%s>“
“EDMGCZ <%s>“
“EDMOID: <%s> <%s>“
“%s *%.*s*”
5900-5999 EDMMAPID
NVD5900I “EDMMAPID_OPEN Entered”
NVD5901E “%s: UNABLE TO ALLOCATE MEMORY FOR THE EDMMAPI CONTROLBLOCK”
“EDMMAPID_CLOSE Entered”
“EDMDEL Object <%s>“
“DELALL Entered”
“DELALL : Deleting <%s>“
“EDMGET : O <%s>, VN <%s>, L <%d>, V <%s>“
“EDMSET : O <%s>, VN <%s>, H <%d>, L <%d>, V <%s>“
“UNKNOWN RECORD TYPE <%s>“
“EDMSTR : O <%s>, VN <%s>, H <%d>“
“EDMGTR : O <%s>, V <%s>, H <%d>“
“EDMGTR: OBJECT NOT FOUND”
“EDMGTR: Template size <%d>“
“EDMGTR: RECORD TOO SMALL. DATASIZE = %ld, MAX_REC_SIZE = %ld”
MessageNumber
NVD5814I
NVD5815I
NVD5816I
NVD5817I
NVD5818I
NVD5819I
NVD5820I
NVD5821I
NVD5822I
NVD5823I
NVD5902I
NVD5903I
NVD5904I
NVD5905I
NVD5906I
NVD5907I
NVD5908E
NVD5910I
NVD5911I
NVD5912E
NVD5913I
NVD5914E
100 Chapter 2
MessageNumber
NVD5915E
NVD5916I
NVD5917E
NVD5918I
NVD5919I
NVD5920I
NVD5921I
NVD5922I
NVD5923E
NVD5924I
NVD5925E
NVD5926I
NVD5927I
NVD5928I
NVD5929E
NVD5930E
NVD5931I
NVD5932I
NVD5933I
NVD5934E
NVD5935E
NVD5936E
NVD5937I
NVD5938I
NVD5939I
NVD5940I
Log Message
“EDMGTR: HEAP NOT FOUND <%d>“
“EDMGTR: Heap size <%d>“
“EDMGTR: ERROR <%d> RETRIEVING DATA BUFFER”
“EDMGTR: Data size <%d>“
“Sending zero bytes across”
“EDMGTR: Class size <%d>“
“EDMGTR : Exit O <%s>, V <%s>, H <%d>, rc = <%d>“
“EDMLOG : <%s>“
“EDMERR : <%s>“
“EDMOBJ : <%s> - find object”
“EDMOBJ : OBJECT NOT FOUND <%s>“
“EDMRFC * Refreshing Cache *”
“EDMUPC * Updating Cache Entry*”
“EDMUPC * Updating <%s.%s.%s.%s>“
“ERROR UPDATING CACHED INSTANCE FOR <%s.%s.%s>“
“ERROR ADDING INDEX CACHE ENTRY FOR <%s.%s.%s.%s>“
“EDMCIN * Cache Info - print cache info *”
“EDMSRT : Sorting Object <%s> Order <%d> Variables <%d>“
“EDMCMP : <%s> - compress object in storage”
“EDMNTC : ERROR RETRIEVING DATA BUFFER <%d>“
“ERROR ALLOCATING TEMP STORAGE”
“ERROR RE-ALLOCATING TEMP STORAGE”
“Template copied to <%08X>, length <%d>“
“Class conversion from network to host order. E <%d>“
“EDMNTC : Class size <%d>“
“EDMDHP : <%s> - delete heap”
CM Configuration Server Messages 101
MessageNumber
NVD5941I
NVD5942I
NVD5943I
NVD5944I
NVD5945I
NVD5946I
NVD5947E
NVD5948I
NVD5949I
NVD5950E
NVD5951E
NVD5952I
NVD5953I
NVD5954I
NVD5955W
NVD5956E
NVD5957E
NVD5958I
NVD5959I
NVD5960I
NVD5961I
NVD5962I
NVD5963I
NVD5964I
NVD5965I
Log Message
“EDMDVR : O <%s>, V <%s> - delete variable”
“EDMSMQ - send message to queue”
“EDMRES - resolve object”
“EDMMIG <%8.8s --> %8.8s>“
“EDMFYI : <%s> - get object info”
“EDMFYI : <%s> T <%d> H <%d>“
“EDMFYI : OBJECT NOT FOUND <%s>“
“EDMZRM - create zerror instance”
“EDMOID - create ObjectID”
“EDMOID ERROR CREATING ObjectID”
“EDMNTI : ERROR RETRIEVING DATA BUFFER <%d>“
“EDMNTI : Instance size <%d>“
“EDMSMT [ADMIN] - set method type”
“Reset task type to administrator”
“Could not reset administrator timeout to <%d> seconds”
“WINDOWS EVENT HANDLE IS NOT OPEN”
“WINDOWS ReportEvent FAILED, RC = <%d>“
“Message sent to system log: <%s>“
“EDMLGF - flush log”
“EDMLGS - switch/dump log”
“EDMBPO <%s> - build patch object”
“EDMBPF <%s> - build path files”
“EDMGTD - get directory name, directory_type <%c>, rec_buf @ <%08x>, length <%d>“
“EDMGTD - directory name is <%s>, rc <%d>“
“EDMGTT - get trace flag”
102 Chapter 2
MessageNumber
NVD5966I
NVD5967I
NVD5968I
NVD5969I
NVD5970I
NVD5971W
NVD5972I
NVD5973W
NVD5974I
NVD5975I
NVD5976I
NVD5977I
NVD5978I
NVD5979I
NVD5980I
NVD5981I
NVD5982I
NVD5983I
NVD5984E
NVD5985E
NVD5986E
NVD5987E
NVD5988E
NVD5989I
Log Message
“Recd. <%s>“
“(Obj) <%8.8s>, (Typ) <%8.8s>, (Len) <%d>“
“Increasing Storage size from <%d> to <%d> bytes”
“Recvd. record of length <%d> bytes”
“Recvd. <%s> of length <%d> bytes”
“Heap Sent Before Template (O) <%8.8s> (T) <%8.8s> (S) <%d>“
“Object <%8.8s> Template <%d> Heap <%d>“
“Limit of <%i> LOG LINES reached for the METHOD, No more messageswill be allowed”
“EDMMKT <%s>“
“EDMKLT <>“
“EDMGMI database SHMID=<%i>“
“EDMGCC <>“
“EDMGCZ <>“
“EDMDSC * Disabling Cache *”
“EDMLDB * Locking Database *”
“EDMUDB * Unlocking Database *”
“EDMENC * Enabling Cache *”
“Deleting old PATCHDUP object”
“BUILDING PATCH RESOURCE OBJECT”
“ERROR BUILDING PATCH RESOURCE OBJECT”
“ERROR, UNABLE TO BUILD PATCH RESOURCE OBJECT”
“NO PATCHES TO PROCESS”
“INCORRECT CALL TO EDMGET; USE: EDMGET(object,number)”
“%s *%.*s*”
CM Configuration Server Messages 103
Log Message
6000-6009 ZATTACH
“Parent TaskID is <%ld>; Command Line is <%s>“
“ERROR FORKING: <%s>“
“USER FUNCTION RETURNED TO AN INVALID PLACE”
“INTERNAL ERROR -- CM CONFIGURATION SERVER DOES NOT SUPPORT PROCESS-BASED SYSTEMS”
“INTERNAL ERROR -- INVALID TASK TYPE OF <%c>“
“Parent TaskID is <%ld>; Command Line is <%s>“
“USER PROGRAM RETURNED TO AN INVALID PLACE”
“ERROR STARTING METHOD <%s>“
“ERROR <%ld> IN CREATE PROCESS FOR <%s>“
“ERROR SPAWNING METHOD <%s> : BECAUSE <%s>, ERRNO = <%d>“
“MAY BE TOO MANY ENVIRONMENT VARIABLES IN CONFIG.SYS”
“CHILD: ERROR <%s> ALLOCATING MEMORY FOR ENVIRONMENTVARIABLE <%s>“
“ERROR <%s> DURING PUTENV OF <%s>“
“ZADMIN execution has been forced”
6100-6199 General Method Messages
“%s: MISSING ZMTHPRMS IN ZMETHOD”
“ERROR GETTING MAIL PATH”
“ERROR GETTING DATABASE PATH”
“ERROR PARSING INPUT PARAMETERS”
“MISSING SENDERS ADDRESS”
“MISSING RECIPIENTS ADDRESS”
“ERROR IN zsys_getCurrentTime(), RC=<%d>”
“ERROR IN CHECK-SUM, RC=<%d>”
“FAILED TRYING TO FIND/CREATE DIRECORY <%s>”
MessageNumber
NVD6001I
NVD6002E
NVD6003E
NVD6004E
NVD6005E
NVD6006I
NVD6007E
NVD6008E
NVD6009E
NVD6010E
NVD6011E
NVD6012E
NVD6013E
NVD6014I
NVD6100E
NVD6101E
NVD6102E
NVD6103E
NVD6104E
NVD6105E
NVD6106E
NVD6107E
NVD6108E
104 Chapter 2
MessageNumber
NVD6109E
NVD6110E
NVD6111E
NVD6112W
NVD6113E
NVD6114E
NVD6115E
NVD6116E
NVD6117I
NVD6118E
NVD6119I
NVD6120E
NVD6121I
NVD6122E
NVD6123E
NVD6124I
NVD6125E
NVD6126I
NVD6127E
NVD6128E
NVD6129E
NVD6130I
NVD6131W
NVD6132E
NVD6133E
Log Message
“ERROR OPENING <%s>”
“ERROR %s NOTIFY HANDLE”
“UNABLE TO SCHEDULE EMAIL REQUEST FOR <%s> FROM <%s> BECAUSE OF INTERNAL ERROR”
“Missing value for keyword <%s>”
“INCORRECT KEYWORD <%s>”
“%s: INSUFFICIENT NUMBER OF PARAMETERS <%d>”
“ONE OF THE MANDATORY INPUT PARAMETERS ARE EMPTY(to,from,mesgfile or message)”
“%s: INVALID PARAMETERS PASSED”
“%s Cache”
“ERROR %s CACHE”
“Cache %s”
“%s: INVALID ARGUMENTS PASSED”
“Option passed = <%s>”
“OPTION MUST BE ENABLE OR DISABLE”
“%s: %s”
“%s Database”
“ERROR %s DATABASE”
“Database %s”
“OPTION MUST BE LOCK OR UNLOCK”
“%s: NO INPUT PARAMETERS”
“NUMBER OF PARAMETERS IS <%d>, MUST BE 2.”
“Event log request: type = <%s>, message = <%s>”
“Event type <%c> is invalid, Type assumed to be informational”
“EVENT LOGGING REQUEST FAILED”
“%s: VARIABLE ZUSERID NOT FOUND IN <%s> OBJECT”
CM Configuration Server Messages 105
MessageNumber
NVD6134W
NVD6135W
NVD6136I
NVD6137E
NVD6138W
NVD6139E
NVD6140E
NVD6141E
NVD6142E
NVD6143I
NVD6144W
NVD6145E
NVD6146E
NVD6147E
NVD6148I
NVD6149E
NVD6150E
NVD6151E
NVD6152I
NVD6153W
NVD6154E
NVD6155E
NVD6156E
NVD6157E
NVD6158E
Log Message
“NTSRVNAM variable not found in <%s>. Local server will be used”
“ZOBJREQ variable not found in <%s>. NTGROUPS object will be used”
“%s: %s”
“%s: AN ACCESS VIOLATION HAS OCCURRED”
“%s: %s”
“ERROR RETRIEVING <%s> GROUPS <%s>”
“%s: ERROR GETTING MANAGER TYPE”
“%s: ERROR GETTING DATABASE STATUS”
“%s: CANNOT PROMOTE TO LOCKED DATABASE”
“%s: Entered”
“No parameters passed in ZMETHOD object, will use defaults”
“%s: ERROR OBTAINING DATABASE LOCATION”
“%s: ERROR GETTING TRACE SETTINGS”
“UNABLE TO FIND INBOUND OBJECT <%s>, TERMINATING”
“%s: Exiting”
“ERROR GETTING MAIL PATH”
“%s: %s OBJECT = <%s>, HEAP = <%d>”
“%s: Error opening <%s>”
“%s: %s, object = <%s>, heap = <%i>. Notification for %s”
“DATABASE IS LOCKED”
“%s: OBJECT <%-s> NOT FOUND”
“%s: UNABLE TO OBTAIN <%d> BYTES OF STORAGE FOR TEMPLATEBUFFER”
“%s: ERROR GETTING TEMPLATE FOR <%-s>”
“%s: UNABLE TO OBTAIN <%d> BYTES OF STORAGE”
“%s: REQUIRED <%-s.%-s> NOT FOUND IN HEAP <%d>”
106 Chapter 2
MessageNumber
NVD6159E
NVD6160E
NVD6161E
NVD6162E
NVD6163E
NVD6164E
NVD6165I
NVD6166E
NVD6167I
NVD6168E
NVD6169I
NVD6170I
NVD6171W
NVD6172E
NVD6173E
NVD6174E
NVD6175E
NVD6176E
NVD6177E
NVD6178E
NVD6179E
NVD6180E
NVD6181E
NVD6182E
NVD6183E
Log Message
“%s: CANNOT READ CLASS <%-s.%-s.%-s>”
“%s: CANNOT READ INSTANCE <%-s.%-s.%-s.%-s>”
“%s: SYNTAX ERROR IN <%-8.8s> LENGTH <%d> VALUE <%-0.*s>”
“%s: CMRRTN rptptr->name <%-8.8s> type <%c>”
“%s; CMRRTN rptptr->bufflen <%d> uselen <%d>”
“%s: CANNOT FIND ENTRY FOR <%-8.8s> LENGTH <%d> VALUE <%-0.*s> IN <%-s.%-s.%-s.%-s>”
“%s: Copied <%-0.*s> to <%-8.8s>”
“%s: CANNOT DELETE DATABASE INSTANCE <%-s.%-s.%-s.%-s>”
“%s: Deleted database instance <%-s.%-s.%-s.%-s>”
“%s: FAILED TO WRITE INSTANCE <%-s.%-s.%-s.%-s>”
“%s: %-s database instance <%-s.%-s.%-s.%-s>”
“%s: Copied <%s> to <%-8.8s>”
“%s: Field <%-8.8s> Not Found!”
“CLASS NOT FOUND <%-s.%-s>”
“EMPTY CLASS <%-s.%-s>”
“ERROR LOCKING CLASS <%-s.%-s>”
“ERROR READING CONTROL INFO <%s>”
“ERROR READING TEMPLATE ENTRY.”
“ERROR ALLOCATING TEMPLATE SPACE <%d> BYTES.”
“INCOMPLETE TEMPLATE IN <%-s.%-s>”
“ERROR ALLOCATING <%d> BYTES OF STORAGE FOR INSTANCE <%-s.%-s.%-s>”
“ERROR LOCKING INSTANCE <%-s.%-s.%-s>”
“ERROR READING INSTANCE <%-s.%-s.%-s>”
“UNABLE TO OBTAIN MEMORY”
“FAILED TO PROCESS THE INPUT OBJECT”
CM Configuration Server Messages 107
Log Message
NVD6184E “kvp_cleanup FAILED RELEASING THE LINK LIST”
NVD6185E “kvp_findStop FAILED RELEASING STRUCTURE FOR DUPLICATEVARAIBLES”
“NO VCxxx VARIABLES WERE PROCESSED.”
“ERROR GETTING SQL DATA”
“Default SQLTOUT = <%d> is used”
“DYNAMIC SQL STATEMENT IS TOO BIG. MAXIMUM SIZE ALLOWEDIS %i”
“UNABLE TO OBTAIN SQL_column TYPE BY NAME”
“FAILED TO PREPARE 'SELECT' STATEMENT”
“FAILED TO EXECUTE 'SELECT' STATEMENT <%s>”
“PROCESSING FAILED DUE TO SQL_GetInfo-error RC =<%i>”
“ERROR EXECUTING %s FUNCTION.”
“ERROR EXECUTING edmmapi_put_var FOR <%s> OBJECT <%s> VARIABLE.”
“Calling EdmConnect with params: DSN=<%s>, USERID=<%s>,PWD=<%s>”
“UNABLE TO FIND SOURCE OBJECT <%s>.”
“InfoValuePtr = <%s>”
“PROCESSING FAILED DUE TO ERRORS ON DATA LOADING FROM HEAP <%i> OF <%i>”
6200-6299 General Method Messages
“ExecuteUpdateForCurrentHeap() Before DuplicateSingleQuotes = <%s>”
“ExecuteUpdateForCurrentHeap() After DuplicateSingleQuotes = <%s>”
“NO UNIQUE COLUMNS FOUND FOR 'WHERE' CLAUSE.TERMINATING”
“SQL-request: %s”
“ERROR LOADING VARIABLE <%s> HEAP <%i> OBJECT <%s>. DEFAULT WILL BE USED”
MessageNumber
NVD6186E
NVD6187E
NVD6188W
NVD6189E
NVD6190E
NVD6191E
NVD6192E
NVD6193E
NVD6194E
NVD6195E
NVD6196I
NVD6197E
NVD6198I
NVD6199E
NVD6200I
NVD6201I
NVD6202E
NVD6203W
NVD6204E
108 Chapter 2
MessageNumber
NVD6205E
NVD6206E
NVD6207E
NVD6208E
NVD6209W
NVD6210E
NVD6211E
NVD6212E
NVD6213E
NVD6214E
NVD6215W
NVD6216E
NVD6217E
NVD6218I
NVD6219E
NVD6220E
NVD6221I
NVD6222E
NVD6223E
NVD6224E
Log Message
“FAILED TO PREPARE 'INSERT' STATEMENT”
“FAILED TO READ DATA FROM OBJECT <%s> HEAP <%i> FOR 'INSERT' HEAP IGNORED”
“FAILED TO EXECUTE 'INSERT' STATEMENT FOR OBJECT <%s> HEAP <%i>”
“PROCESSING FAILED DUE TO SQL ERRORS. OBJECT <%s> HEAP <%i>”
“The row requested for REPLACE does not exist in the database. INSERT will be executed. Heap <%i> of <%i>”
“FAILED TO PREPARE 'INSERT' STATEMENT FOR OBJECT <%s> HEAP <%i>”
“PROCESSING FAILED DUE TO SQL ERRORS. HEAP <%i> OF <%i>”
“ERROR GETTING VARIABLE <%s>, HEAP = <%d>”
“INTERNAL ERROR IN GETTING VARIABLE <%s> FROM LIST OFPARAMETERS”
“%s: OBJECT NAME WAS NOT SUPPLIED”
“Variable <%s> was not found”
“REQUIRED VARIABLE <%s> NOT FOUND IN THE REQUEST OBJECT<%s>.”
“%s, DSN = <%s>, RC = <%d>, SQLState = <%s>”
“%s: SQLDescribeCol(): pRoot->request->hstmt = %8X, ColumnNumber = %d, ColumnName = %s, sizeof(ColumnName) = %d, NameLength = %d, ColumnSize = %d, DecimalDigits = %d, Nullable = %d”
“NOT ENOUGH INFO IN VC PAIR DEFINITION”
“INCORRECT VC PAIR DEFINITION”
“%s Starting Object: %8.8s”
“%s VARIABLE ZUSERID NOT FOUND IN <%8.8s> OBJECT”
“%s VARIABLE ZPWD NOT FOUND IN <%8.8s> OBJECT”
“%s ZUSERID: <%8.8s> SIGNON FAILED”
CM Configuration Server Messages 109
MessageNumber
NVD6225I
NVD6226E
NVD6227E
NVD6228E
NVD6229E
NVD6230E
NVD6231E
NVD6232E
NVD6233E
NVD6234W
NVD6235E
NVD6236E
NVD6237E
NVD6238E
NVD6239E
NVD6240E
NVD6241I
NVD6242I
NVD6243I
NVD6244E
NVD6245E
NVD6246E
NVD6247I
NVD6248E
NVD6249I
Log Message
“%s ZUSERID: <%8.8s> Signon Verified”
“%s TEMPLATE NOT FOUND FOR <%8.8s>”
“%s - ERROR OPENING FILE %32.32s”
“%s ERROR IN WRITING PREFIX FOR CLASS %s.%s.%s.%s”
“%s ERROR IN WRITING CLASS HEADER %s.%s.%s.%s”
“%s ERROR IN WRITING CLASS TEMPLATE %s.%s.%s.%s”
“%s: HEAP NOT FOUND FOR <%8.8s>”
“%s: NO PASSWORD ENTRY FOR USER <%s>”
“%s: PASSWORD EXPIRED FOR USER <%s>”
“%s: Password Will Expire In <%ld> Days For User <%s>”
“%s ERROR CLOSING LOGN TOKEN”
“%s ZUSERID: <%s> SIGNON FAILED: <%s>”
“%s ZUSERID: <%s> SAF: <%s>”
“ERROR: GetTokenInformation() RC <%ld> GETTING TOKEN INFO LENGTH”
“ERROR: malloc(%lu) FAILED FOR TOKEN BUFFER”
“ERROR: GetTokenInformation() RC <%ld> GETTING TOKEN INFO”
“User <%s> belongs to the following groups:”
“SID SidNameUse DomainName\\GroupName”
“%08x %d %-16.16s %-s\\%-s”
“ERROR: <%ld> GETTING ACCOUNT SID INFO”
“NOT A VALID ACL. ERROR: <%ld>”
“ERROR: <%ld> GETTING ACE ADDRESS.”
“No full access.”
“INVALID TIME \"%s\" PASSED TO EDMSLEEP METHOD - DEFAULTING TO 60 SECONDS”
“Method going to sleep for %d seconds”
110 Chapter 2
MessageNumber
NVD6250I
NVD6251E
NVD6252E
NVD6253E
NVD6254E
NVD6255E
NVD6256E
NVD6257E
NVD6258E
NVD6259E
NVD6260E
NVD6261E
NVD6262E
NVD6263E
NVD6264E
NVD6265E
NVD6266E
NVD6267E
Log Message
“Sleep method woke up and is now terminating”
“ERROR CREATING FILE <%s> FOR NOTIFY”
“ERROR CREATING DOMAIN <%s.%s> FOR NOTIFY”
“ERROR CREATING CLASS <%s.%s.%s> FOR NOTIFY”
“ERROR LOCKING CLASS <%s.%s.%s.%s>”
“ERROR UNLOCKING CLASS <%s.%s.%s.%s>”
“UNABLE TO WRITE <%s> STATS, BECAUSE <DOMAIN %s DOES NOT EXIST>”
“UNABLE TO USE <%s> STATS, BECAUSE <CLASS %s DOES NOT EXIST>”
“UNABLE TO USE <%s> STATS, BECAUSE <CLASS INFO FOR <%s> IS NOT AVAILABLE>”
“UNABLE TO WRITE <%s> STATS, BECAUSE <MEMORY ALLOCATIONFAILURE FOR THE TEMPLATE BUFFER>”
“UNABLE TO WRITE <%s> STATS, BECAUSE <CLASS %s IS NOT LOCKING>”
“UNABLE TO WRITE <%s> STATS, BECAUSE <CLASS TEMPLATE IS NOT AVAILABLE>”
“UNABLE TO WRITE <%s> STATS, BECAUSE <MEMORY ALLOCATIONFAILURE FOR THE INSTANCE BUFFER”
“ERROR %s INSTANCE <%s.%s.%s.%s> WHILE STORING NOTIFYRESULTS”
“UNABLE TO SCHEDULE REQUEST, BECAUSE<NOTIFY.RETRY.NOTIFY CLASS IS NOT FOUND>”
“UNABLE TO ALLOCATE BUFFER FOR TEMPLATE OF <NOTIFY.RETRY.NOTIFY>”
“UNABLE TO LOCK <NOTIFY.RETRY.NOTIFY CLASS>”
“UNABLE TO READ TEMPLATE FOR <NOTIFY.RETRY.NOTIFYCLASS>”
CM Configuration Server Messages 111
MessageNumber
NVD6268E
NVD6269E
NVD6270E
NVD6271E
NVD6272E
NVD6273E
NVD6274E
NVD6275E
NVD6276E
NVD6277E
NVD6278E
NVD6279E
NVD6280E
NVD6281E
NVD6282E
NVD6283E
NVD6284E
NVD6285I
NVD6286I
NVD6289E
NVD6290I
NVD6291I
NVD6292I
NVD6293I
NVD6294I
Log Message
“UNABLE TO ALLOCATE BUFFER FOR INSTANCE OF <NOTIFY.RETRY.NOTIFY>”
“%s PRE-PROMOTE OBJECT NOT FOUND”
“%s - VARIABLE ZPRMOS NOT FOUND IN %s”
“%s - SETUP INSTANCE CHECK FOR <%s.%s.%s.%s>”
“%s - INSTANCE FOUND <%s.%s.%s.%s>”
“%s - INSTANCE NOT FOUND <%s.%s.%s.%s>”
“%s - INSTANCE CHECK FAILURE FOR <%s.%s.%s.%s>”
“%s - VARIABLE %s NOT FOUND IN %s”
“%s - ERROR SORTING PREPROMOTE OBJECT”
“%s - ERROR GETTING %s”
“%s - ERROR RESOLVING ZRSOURCE INSTANCES”
“%s - ZRSOURCE OBJECT NOT FOUND”
“%s - ERROR SORTING ZRSCOBJ”
“%s - ERROR RESOLVING ZRSOURCE INSTANCES”
“%s - VARIABLE %s NOT FOUND”
“%s - AGENT LOCATION NOT FOUND”
“%s - NO %s PROVIDED FOR HEAP %d”
“%s - +++++ %s TIME %s +++++”
“%s: Sending Shutdown Request to the CM Configuration Server”
“%s: ENDING WITH ERRORS”
“%s: %s logons %s”
“%s: PID = <%s>”
“%s: Inbound object name = <%s>”
“%s: Current object name = <%s>”
“%s: Message = <%s>”
112 Chapter 2
Log Message
“%s: Heaps = <%s>”
“%s: Resolve objects = <%s>”
“%s: files to send = <%s>”
“%s: Method running = <%s>”
“%s: Files sent = <%s>”
6300-6399 General Method Messages
“%s: -- new value is <%i>”
“%s: Flush Log Request issued from Console”
“%s: Switch Log Request issued from Console”
“%s: %s domain: <%s> class: <%s> instance: <%s> message: <%s> parent: <%s>”
“%s: Simulation has started at <%s>”
“%s: Put Template length - %d name - %s template - %s”
“%s *%.*s*”
“%s: CANNOT UPDATE LOCKED DATABASE”
“%s: INCORRECT NUMBER OF ARGUMENTS PASSED <%d>”
“%s: CLASS ZBASE CAN NOT BE DELETED”
“%s: CANNOT UPDATE THE DATABASE OF AN CM CONFIGURATIONSERVER TYPE SERVER”
“%s: OBJECT DATABASE ACCESS ERROR”
“%s: Class Deleted <%s>”
“%s: CLASS NOT FOUND <%s>”
“%s: INSTANCE NOT FOUND: <%s>”
“%s: Instance Key: <%s>”
“%s: Instance Deleted <%s>”
“%s: ERROR DELETING INSTANCE <%s>”
“%s: NO INSTANCES FOUND”
MessageNumber
NVD6295I
NVD6296I
NVD6297I
NVD6298I
NVD6299I
NVD6300I
NVD6301I
NVD6302I
NVD6303I
NVD6304I
NVD6305I
NVD6306I
NVD6307E
NVD6308E
NVD6309E
NVD6310E
NVD6311E
NVD6312I
NVD6313E
NVD6314E
NVD6315I
NVD6316I
NVD6317E
NVD6318E
CM Configuration Server Messages 113
MessageNumber
NVD6319E
NVD6320E
NVD6321E
NVD6322E
NVD6323E
NVD6324I
NVD6325I
NVD6326E
NVD6327I
NVD6328I
NVD6329E
NVD6330E
NVD6331E
NVD6332E
NVD6333E
NVD6334E
NVD6335E
NVD6336E
NVD6337E
NVD6338E
NVD6339I
NVD6340I
NVD6341I
Log Message
“%s: MISSING OBJECT NAME”
“%s: CANNOT RUN AMS UPDATE OPERATION ON LOCKEDDATABASE”
“%s: NO ARGUMENTS FOUND”
“%s: CLASS <%s.%s.%s> NOT FOUND”
“%s: INSTANCE <%s.%s.%s.%s> NOT FOUND”
“%s: Class <%s.%s.%s> was found”
“%s: Instance <%s.%s.%s.%s> was found”
“%s: PROFILE ERROR - ZUSERID NOT FOUND”
“%s: Get Profile Userid <%s>, From Object <%s>, To Object <%s>, Instance <%s>”
“%s: Creating Object : <%s>”
“%s: UNABLE TO USE <%s> STATS, BECAUSE CLASS <%s> DOES NOTEXIST”
“%s: UNABLE TO USE <%s> STATS, BECAUSE CLASS INFO FOR <%s> IS NOT AVAILABLE”
“%s: PROFILE ERROR - %s CLASS : <%s>”
“%s: PROFILE ERROR - ALLOCATING HEAP STORAGE : <%s>”
“%s: PROFILE ERROR - %s INSTANCE : <%s>”
“%s: RODO ERROR (TEMPLATE) <%s>”
“%s: NO MATCHING INSTANCES FOUND IN CLASS <%s>”
“%s: CANNOT UPDATE THE DATABASE OF A SERVER”
“%s: DATABASE IS LOCKED FOR SYNCHRONIZATION. NO UPDATESALLOWED”
“%s: CANNOT GET DOMAIN INFORMATION”
“%s: Getting ZMETHOD ZMTHPARMS”
“%s: Verifying ZMETHOD ZMTHPARMS”
“%s: Initializing notify request structure”
114 Chapter 2
MessageNumber
NVD6342I
NVD6343E
NVD6344I
NVD6345E
NVD6346I
NVD6347W
NVD6348W
NVD6349E
NVD6350E
NVD6351W
NVD6352W
NVD6353E
NVD6354I
NVD6355E
NVD6356E
NVD6357E
NVD6358E
NVD6359E
NVD6360E
NVD6361E
NVD6362E
NVD6363E
NVD6364E
NVD6365E
NVD6366E
Log Message
“%s: Creating notify request structure”
“%s: ERROR CREATING REQUEST STRUCTURE”
“%s: Storing notify request structure”
“%s: ERROR STORING REQUEST STRUCTURE”
“%s: Sending request to the queue”
“%s: Unable to initiate notify handle, will try to continue”
“%s: Unable to store notify results, will try to continue”
“%s: NO OBJECT SPECIFIED -- REJECTED”
“%s: COMPRESS OBJECT - OBJECT NOT FOUND: <%s>”
“%s: Delete Object Instance - Object <%s> not found”
“%s: Bad Heap Number <%d> requested for Deletion. Max Heap Number is <%d> for <%s>”
“%s: SORT OBJECT - OBJECT NOT FOUND”
“%s: Sort Object - Single Heap Object”
“%s: NEW OBJECT <%-s> SAME AS OLD OBJECT <%-s>, COPY NOT DONE”
“%s: FROM OBJECT <%-s> NOT FOUND”
“%s: EMPTY OBJECT <%-s>, NO %s”
“%s: NEW OBJECT <%-s> ALREADY EXISTS, COPY NOT DONE”
“%s: UNABLE TO ALLOCATE <%d> BYTES FOR <%-s> %s BUFFER”
“%s: TEMPLATE NOT FOUND FOR OBJECT <%-s>, RC <%d>”
“%s: ERROR ON PUT <%-s> TEMPLATE, RC <%d>”
“%s: HEAP <%d> NOT FOUND IN <%-s>, RC <%d>”
“%s: ERROR ON PUT <%-s> HEAP <%d>, RC <%d>”
“%s: DELETE VARIABLE - OBJECT NOT FOUND”
“%s: PROMOTE TO ANY - OBJECT NOT FOUND”
“%s: ERROR ALLOCATING %s STORAGE”
CM Configuration Server Messages 115
MessageNumber
NVD6367E
NVD6368E
NVD6369E
NVD6370E
NVD6371E
NVD6372E
NVD6373E
NVD6374E
NVD6375E
NVD6376E
NVD6377E
NVD6378E
NVD6379E
NVD6380E
NVD6381E
NVD6382E
NVD6383E
NVD6384I
NVD6385E
NVD6386E
NVD6387E
NVD6388E
NVD6389E
NVD6390E
NVD6391E
Log Message
“%s: ERROR LOCKING <%s>”
“%s: ERROR GETTING %s”
“%s: %s NOT FOUND IN HEAP <%d>”
“%s: ERROR DELETING <%s>.<%s>.<%s>”
“%s: ERROR CREATING <%s>.<%s>.<%s>”
“%s: ERROR LOCKING <%s>.<%s>.<%s>”
“%s: ERROR WRITING <%s>.<%s>.<%s>”
“%s: ERROR UNLOCKING <%s>.<%s>.<%s>”
“%s: ENTRY <%s>.<%s>.<%s> NOT CACHED: rc: <%d>”
“%s: ERROR UNLOCKING <%s>”
“%s: CLASS NOT FOUND <%s>.<%s>”
“%s: EMPTY CLASS <%s>.<%s>”
“%s: ERROR LOCKING CLASS <%s>.<%s>”
“%s: ERROR READING CONTROL INFO <%s>”
“%s: ERROR READING TEMPLATE ENTRY”
“%s: ERROR ALLOCATING STORAGE FOR INSTANCE”
“%s: ERROR READING <%s>.<%s>.<%s>”
“%s: Processing object <%s>”
“%s: WRITING DIRECTLY TO VSAM AUDIT DATABASE IS NOT SUPPORTED, OBJNAME <%s>”
“%s: ERROR, %s NOT FOUND FOR OBJECT <%s>”
“%s: ERROR OPENING FILE <%s>”
“%s: Opening <%s>”
“%s: ERROR OPENING FILE <%s> : ERRNO <%s>”
“%s: ERROR WRITING <%d> BYTES TO FILE <%s>”
“%s: chmod FAILED FOR <%s> ERRNO <%d>:<%s>”
116 Chapter 2
Log Message
“%s: ERROR - NO DATA WRITTEN TO FILE <%s>”
“%s: <%ld> bytes written to file <%s>”
“%s: ERROR OPENING FILE <%s>, TYPE <%s>, MODE <%s>”
“%s: Opening <%s> type <%s>”
“%s: ERROR OPENING FILE <%s> TYPE <%s>:<%s>”
“%s: INVALID %s NAME <%s> FILE <%s>”
“%s: chown FAILURE: USER <%s> FILE <%s>”
“%s: INVALID ZEDMTYPE <%s>”
6400-6499 General Method Messages
“%s: ERROR <%d> ADDING FILE <%s>”
“%s: ERROR <%d> ADDING DOMAIN <%s.%s>”
“%s: ERROR <%d> CREATING CLASS <%s.%s.%s>”
“%s: ERROR <%d> LOCKING CLASS <%s.%s.%s>”
“%s: ERROR <%d> LOCKING INSTANCE <%s.%s.%s.%s>”
“%s: ERROR WRITING <%d> BYTES TO INSTANCE <%s.%s.%s.%s>”
“%s: ERROR WRITING <%ld> BYTES TO CLASS <%s.%s.%s>”
“%s: ERROR - NO DATA WRITTEN TO CLASS <%s.%s.%s>”
“%s: ERROR - NO DATA WRITTEN TO INSTANCE <%s.%s.%s.%s>”
“%s: <%ld> bytes written to class <%s.%s.%s>”
“%s: <%ld> bytes written to instance <%s.%s.%s.%s>”
“%s: Object <%-s> was not found”
“%s: From: <%s> To: <%s>”
“%s: Write History F.D.C <%s.%s.%s>”
“%s: UNABLE TO OBTAIN <%d> BYTES OF STORAGE FOR %sBUFFER”
“%s: History T (%d) H (%d)”
MessageNumber
NVD6392E
NVD6393I
NVD6394E
NVD6395I
NVD6396E
NVD6397E
NVD6398E
NVD6399E
NVD6400E
NVD6401E
NVD6402E
NVD6403E
NVD6404E
NVD6405E
NVD6406E
NVD6407E
NVD6408E
NVD6409I
NVD6410I
NVD6411W
NVD6412I
NVD6413I
NVD6414E
NVD6415I
CM Configuration Server Messages 117
MessageNumber
NVD6416E
NVD6417E
NVD6418E
NVD6419I
NVD6420I
NVD6421I
NVD6422I
NVD6423E
NVD6424I
NVD6425I
NVD6426I
NVD6427E
NVD6428E
NVD6429I
NVD6430E
NVD6431E
NVD6432E
NVD6433E
NVD6434E
NVD6435I
NVD6436E
NVD6437E
NVD6438E
Log Message
“%s: ERROR WRITING CLASS TEMPLATE FOR <%s.%s.%s>”
“%s: OBJECT NOT FOUND <%s>”
“%s: ERROR <%d> WRITING INSTANCE <%s.%s.%s.%s>”
“%s: Instance <%s.%s.%s.%s> written from object <%s> heap <%ld>”
“%s: ERROR <%d> UNLOCKING INSTANCE <%s.%s.%s.%s>”
“%s: Wrote <%ld> instances to <%s.%s.%s>, size <%ld>, from <%s> heaps <%ld>”
“%s: User: <%s> From: <%s> To: <%s>”
“%s: UNABLE TO CREATE %s”
“%s: Profile T (%d) H (%d)”
“%s: Entered VarName = <%8.8s>, VarLenName = <%8.8s>”
“%s: Wire pwd = <%s>”
“%s: UNABLE TO OBTAIN <%ld> BYTE BUFFER FOR CLASS <%s.%s.%s.%s>”
“%s: ERROR READING CONTROL INFO FOR CLASS <%s.%s.%s.%s>”
“%s: DB pwd = <%s>, pwdLen = %d, rc = %d”
“%s: OBJECT DATABASE ACCESS ERROR CLASS <%s> INSTANCE<%s>”
“%s: OBJECT DATABASE ACCESS ERROR FOR CLASS <%s>”
“%s: OBJECT DATABASE ACCESS ERROR FOR INSTANCE <%s>”
“%s: UPDATED RESOURCE <%s>”
“%s: INVALID ID IN INSTANCE NAME <%s>”
“%s: Parent instance with object id <%s> could not be located for <%s.%s.%s>”
“%s: CLASS NOT FOUND <%s.%s.%s>”
“%s: ERROR READING INSTANCE <%s.%s.%s.%s>, BYTES READ <%d>”
“%s: ERROR EXPECTED OBJECT ID <%12.12s>, ACTUAL OBJECT ID <%12.12s> IN <%s.%s.%s.%s>”
118 Chapter 2
MessageNumber
NVD6439E
NVD6440E
NVD6441E
NVD6442I
NVD6443I
NVD6444I
NVD6445E
NVD6446E
NVD6447E
NVD6448E
NVD6449I
NVD6450E
NVD6451I
NVD6452I
NVD6453I
NVD6454E
NVD6455E
NVD6456E
NVD6457I
NVD6458E
NVD6459E
NVD6460I
NVD6461I
NVD6462I
NVD6463E
NVD6464E
Log Message
“%s: UNABLE TO OBTAIN STORAGE FOR %s”
“%s: UNABLE TO GET %s”
“%s: PUT PROFILE - TEMPLATE OBJECT NOT FOUND”
“%s: Original CLASS Profile T (%d) H (%d)”
“%s: Class Size Changed New Profile T (%d) H (%d)”
“%s: Class Content Changed New Profile T (%d) H (%d)”
“%s: PROFILE - ERROR OPENING CLASS <%s.%s.%s>”
“%s: ERROR IN WRITING NEW CLASS TEMPLATE”
“%s: PUT PROFILE - OBJECT NOT FOUND”
“%s: PROFILE - ERROR OPENING CLASS <%s.%s.%s>”
“%s: %s Instance <%s.%s.%s.%s>”
“%s: ERROR OPENING FILE <%s.%s.%s.%s>”
“%s: Creating Instance from Class Record T (%d) H (%d)”
“%s: Varname (%8.8s) To Dspl (%d) From Offset (%d) Len (%d)”
“%s: Contents (%s)”
“%s: ERROR IN WRITING INSTANCE DATA FOR <%s.%s.%s.%s>”
“%s: PROFILE - ERROR OPENING INSTANCE <%s.%s.%s>”
“%s: PROFILE - ERROR READING INSTANCE <%s.%s.%s>”
“%s: Remapping Instance (%s) Old T (%d) H (%d), New T (%d) H (%d)”
“%s: PROFILE - ERROR WRITING INSTANCE <%s.%s.%s>”
“%s: VARIABLE LOG LIST - <%s> OBJECT NOT FOUND %s”
“%s: ZVARLOG FOR OBJECT <%s>”
“%s: VARIABLE LEN INSTANCE %d”
“%s: %8.8s %03d '%s'”
“%s: NOT DONE, OBJECT NOT FOUND”
“%s: SUBSTITUTION BUFFER TOO SMALL”
CM Configuration Server Messages 119
MessageNumber
NVD6465E
NVD6466E
NVD6467I
NVD6468E
NVD6469E
NVD6470I
NVD6471D
NVD6472E
NVD6473A
NVD6474E
NVD6475E
NVD6476E
NVD6477E
NVD6478E
NVD6479I
NVD6480E
NVD6481E
NVD6482W
NVD6483E
NVD6484E
NVD6485E
NVD6486E
NVD6487I
NVD6488E
NVD6489E
NVD6490E
Log Message
“%s: SUBSTITUTION ERROR”
“%s: ITEM DOES NOT FIT IN LIST BUFFER”
“%s: NO NAMES FOUND”
“%s: NAME DOES NOT FIT IN BUFFER”
“%s: ERROR GETTING HEAP FOR <%-s>”
“%s: exited, rc <%d>”
“%s: %s”
“%s: %s”
“%s: %s”
“%s: INSTANCE NAME <%s> EXCEEDS <%d> CHARACTERS”
“%s: ERROR LOCKING INSTANCE <%s>”
“%s: ERROR FINDING RESOURCE FOR INSTANCE <%s>”
“%s: ERROR LOCKING RESOURCE <%s>”
“%s: ERROR WRITING RESOURCE <%s>”
“%s: ztcbg @ %08x”
“%s: FINDFIRST/NEXTCLASS ERROR: <%s>”
“%s: ERROR IN CONTROL RESOLUTION”
“%s: Control Resolution - OBJECT [ZCONTROL] NOT FOUND”
“%s: ERROR IN TREE RESOLUTION”
“%s: TreeView - OBJECT [ZTREEOBJ] NOT FOUND”
“%s: ERROR IN MakeTree RESOLUTION”
“%s: TREE ERROR OBJECT <%s> NOT CREATED”
“%s: TREE ERROR object <%s> created”
“%s: ERROR IN KillTree”
“%s: GET export_path FAILED”
“%s: ERROR GETTING OBJECT INFO, ERROR=<%s>”
120 Chapter 2
Log Message
“%s: UNKNOWN INSTANCE NAME, UPDOBJ FAILED,INSTANCE=<%s>”
“%s: ERROR RETRIEVING INSTANCE DATA, ERROR=<%s>”
“%s: ERROR IN INSTANCE: OBJECTID IS BLANK”
“%s: UPDOBJ - getting class”
“%s: OBJECT TIMESTAMPS WERE NOT EQUAL, RC=<%d>”
“%s: ERROR LOCKING CLASS, ERROR=<%s>”
“%s: ERROR RETRIEVING CLASS DATA, RC=<%d>”
“%s: ENTRY # %d MISMATCH <%s>.<%s>.<%s>”
“%s: DATABASE <%8.8s> <%d> BROWSER <%8.8s> <%d> <%x>”
6500-6599 General Method Messages
“%s: RULES STARTING SYSTEM ACCESS LEVEL”
“%s: ZRULES - NO ZADMIN FUNCTION PROVIDED”
“%s: ZRULES - ALLOW: no processing for <%s>”
“%s: ZRULES - NO ADMIN TYPE PROVIDED”
“%s: ZRULES - NO ADMIN CLASS PROVIDED”
“%s: ZRULES - NO ADMIN INSTANCE GIVEN”
“%s: ZRULES - ERROR ALLOCATING STORAGE”
“%s: LISTFILE - listrc <%d> Items <%lu> Length <%d> Addr <%x>”
“%s: LISTDOMN - listrc <%d> Items <%lu> Length <%d>”
“%s: LISTCLAS - listrc <%d> Items <%lu> Length <%d>”
“%s: LISTINST - listrc <%d> Items <%lu> Length <%d>”
“%s: ZRULES - No Rules Present - System default Access is (I)GNORE”
“%s: ZRULES - No Rules Present - System default Access is (A)LLOW”
“%s: ZRULES - No Rules Present - System default Access is (D)ENY”
“%s: Rules Object <%s>”
MessageNumber
NVD6491E
NVD6492E
NVD6493E
NVD6494I
NVD6495E
NVD6496E
NVD6497E
NVD6498E
NVD6499E
NVD6500E
NVD6501E
NVD6502E
NVD6503E
NVD6504I
NVD6505E
NVD6506E
NVD6507E
NVD6508E
NVD6509E
NVD6510I
NVD6511I
NVD6512I
NVD6513I
NVD6514I
CM Configuration Server Messages 121
MessageNumber
NVD6515I
NVD6516I
NVD6517I
NVD6518E
NVD6519E
NVD6520E
NVD6521E
NVD6522I
NVD6523E
NVD6524E
NVD6525E
NVD6526E
NVD6527E
NVD6528E
NVD6529E
NVD6530E
NVD6531E
NVD6532E
NVD6533E
NVD6534E
NVD6535E
NVD6536E
NVD6537E
NVD6538E
Log Message
“%s: ZRULES - zvarsort rc <%d>, list @ <%08x>, item length <%d>, items<%d>”
“%s: ZRULES - List item <%d> <%-0.*s>”
“%s: Rules Ended RC (%d)”
“%s: ERROR SETTING UP VARIABLES”
“%s: ERROR INVALID TYPE PROVIDED <%c>”
“%s: ERROR GETTING DIRECTORY, RC=<%d>”
“%s: DUPLICATE INSTANCE NAME, ADDOBJ FAILED,INSTANCE=<%s>”
“%s: ADDOBJ - getting class”
“%s: ERROR GETTING %s FROM THE WIRE, RC=<%d>”
“%s: ERROR LOCKING CLASS <%s.%s.%s>, ERROR IS <%s>”
“%s: ERROR RETRIEVING CLASS DATA FOR <%s.%s.%s>, ERROR IS <%s>”
“%s: ERROR UNLOCKING CLASS <%s.%s.%s>, ERROR IS <%s>”
“%s: ENTRY # %d MISMATCH <%s>.<%s>.<%s>”
“%s: DATABASE <%8.8s> <%d> BROWSER <%8.8s> <%d>”
“%s: ERROR GETTING DOMAIN, ERROR IS <%s>”
“%s: DUPLICATE CLASS NAME, ADDOBJ FAILED, INSTANCE=<%s>”
“%s: ERROR RETRIEVING CLASS %s, RC=<%d>”
“%s: ERROR CREATING NEW CLASS OBJECT, ERROR IS <%s>”
“%s: ERROR CREATING NEW CLASS, ERROR IS <%s>”
“%s: ERROR CREATING NEW BASE INSTANCE, RC=<%s>”
“%s: ERROR UPDATING DATABASE CONTROL INFORMATION,RC=<%d>”
“%s: MISSING %s NAME”
“%s: INVALID (Blank) %s NAME”
“%s: DOMAIN EXISTS”
122 Chapter 2
MessageNumber
NVD6539E
NVD6540E
NVD6541E
NVD6542E
NVD6543E
NVD6544E
NVD6545E
NVD6546E
NVD6547E
NVD6548I
NVD6549I
NVD6550E
NVD6551E
NVD6552E
NVD6553E
NVD6554I
NVD6555E
NVD6556E
NVD6557E
NVD6558E
NVD6559E
NVD6560E
NVD6561E
NVD6562W
NVD6563E
NVD6564E
Log Message
“%s: ERROR CREATING %s”
“%s: ERROR WRITING ZBASE CLASS”
“%s: CLASS DOES NOT EXIST, ADD INSTANCE FAILED”
“%s: ERROR DISINHERITING RC=<%d>”
“%s: ERROR CREATING INSTANCE <%s>”
“%s: ERROR CREATING NEW INSTANCE, RC=<%d>”
“%s: ERROR DELETING INSTANCE <%s>, RC=<%d>”
“%s: ERROR UPDATING CLASS CONTROL, ERROR IS <%s>”
“%s: %s NOT FOUND <%s>”
“%s: Copy instance <%s> into <%s>”
“%s: Check existence of <%s> class”
“%s: INSTANCE <%s> ALREADY EXISTS”
“%s: RENAMING TO THE SAME INSTANCE NAME <%s>”
“%s: ERROR ALLOCATING <%d> BYTES OF STORAGE FOR %s <%s>”
“%s: ERROR <%d> COPYING INSTANCE <%s> INTO <%s>”
“%s: Successfully copied instance <%s> into <%s>”
“%s: ERROR CREATING RESOURCE %s <%s>”
“%s: ERROR LOCKING RESOURCE <%s>”
“%s: ERROR READING RESOURCE PREFIX FOR <%s>”
“%s: ERROR WRITING DATA FOR RESOURCE <%s>”
“%s: SOURCE AND TARGET FILES DO NOT MATCH”
“%s: TARGET CLASS ALREADY EXISTS, CLASS = <%s>”
“%s: ERROR CREATING NEW CLASS OBJECT, ERROR IS <%s>”
“%s: Issue Reading Source, Null instance error is <%s>, ignored”
“%s: ERROR GETTING CLASS <%s>”
“%s: CLASS SIZE <%d> vs. <%d> NOT EQUAL FOR CLASS <%s>”
CM Configuration Server Messages 123
MessageNumber
NVD6565E
NVD6566E
NVD6567E
NVD6568I
NVD6569E
NVD6570E
NVD6571I
NVD6572E
NVD6573I
NVD6574W
NVD6575I
NVD6576I
NVD6577I
NVD6578I
NVD6579E
NVD6580E
NVD6581E
NVD6582E
NVD6583E
NVD6584E
NVD6585E
NVD6586E
NVD6587I
Log Message
“%s: ERROR COPYING PACKAGE INSTANCE”
“%s: CopyPackage FAILED TO COPY ALL PACKAGE INSTANCES,DELETING NEW INSTANCES”
“%s: CopyPackage FAILED TO DELETE NEW INSTANCES”
“%s: CopyPackage Successfully cleaned up new instances”
“%s: ERROR GETTING ENTRY FOR PACKAGE INSTANCE”
“%s: ERROR PARSING LIST ENTRY RC = <%d> <%s>”
“%s: Copy Package Instance <%s> into <%s>”
“%s: ERROR READING INSTANCE <%s>”
“%s: Connections found for new instance <%s>”
“%s: No Connections found for new instance <%s>”
“%s: Successfully copied instance <%s> into <%s> <%0.*s> <%0.*s> <%0.*s>”
“%s: Deleting instance <%s>”
“%s: Instance Not Found <%s>, No need to delete”
“%s: Instance Deleted <%s>”
“%s: ERROR DELETING INSTANCE <%s>”
“%s: COPYING TO THE SAME INSTANCE NAME <%s>”
“%s: ERROR: INSTANCE <%s> HAS A 0 RESOURCE SIZE”
“%s: INSTANCE <%s> DOES NOT EXIST”
“%s: ERROR LOCKING INSTANCE, ERROR IS <%s>”
“%s: UNABLE TO DELETE RESOURCE PRIOR TO COPYING NEW RESOURCE <%s> INTO <%s> RC = <%d>”
“%s: ERROR <%d> COPYING RESOURCE FROM <%s> INTO <%s>”
“%s: ERROR <%d> UPDATING INSTANCE FOR RSOURCE COPY FROM<%s> INTO <%s>”
“%s: Successfully updated instance for resource copy from <%s> into <%s>”
124 Chapter 2
Log Message
“%s: %s ERROR GETTING FUNCTION, RC <%d>, HEAP <%d> WILL BE SKIPPED”
“%s: %s WRONG FUNCTION <%s>. HEAP <%d> WILL BE SKIPPED”
“%s: %s TYPE NOT PROVIDED. HEAP <%d> WILL BE SKIPPED”
“%s: %s INVALID TYPE <%c> PROVIDED, HEAP <%d> WILL BE SKIPPED”
“%s: ERROR GETTING INSTANCE INFORMATION”
“%s: ATTEMPT TO DELETE THE BASE INSTANCE”
“%s: RULES DENIED ON %s DELOBJ”
“%s: ERROR RETRIEVING MASKS, RC=<%d>”
“%s: Checking Access before deletion”
“%s: UNKNOWN INSTANCE NAME, <%s> FAILED, INSTANCE=<%s>”
“%s: ERROR ON INSTANCE FIND, ERROR IS <%s>”
“%s: ERROR GETTING INSTANCE DIRECTORY, RC=<%d>”
6600-6699 General Method Messages
“%s: ERROR DELETING CLASS <%s.%s.%s> AND INSTANCES, RC <%d>”
“%s: ERROR RETRIEVING INSTANCE DATA, ERROR IS <%s>”
“%s: ASSOCIATED RESOURCE OBJECT: <%s>”
“%s: BAD INSTANCE NAME, DELOBJ FAILED, INSTANCE=<%s>,ERROR IS <%s>”
“%s: MULTI-RESOURCE DELETE, RESOURCE NOT FOUND IN DOMAIN: <%s>, CHECKING DEFAULT DOMAIN”
“%s: Deleting Resource <%s.%s.%s.%s>”
“%s: RESOURCE DELOBJ FAILED, PROBABLE DATALESS RESOURCE,RESOURCE ID: <%s>”
“%s: Successfully deleted instance”
“%s: ERROR GETTING DOMAIN INFORMATION, RC=<%d>”
MessageNumber
NVD6588E
NVD6589E
NVD6590E
NVD6591E
NVD6592E
NVD6593E
NVD6594E
NVD6595E
NVD6596I
NVD6597E
NVD6598E
NVD6599E
NVD6600E
NVD6601E
NVD6602E
NVD6603E
NVD6604E
NVD6605I
NVD6606E
NVD6607I
NVD6608E
CM Configuration Server Messages 125
MessageNumber
NVD6609E
NVD6610E
NVD6611E
NVD6612E
NVD6613E
NVD6614E
NVD6615E
NVD6616W
NVD6617E
NVD6618E
NVD6619W
NVD6620W
NVD6621E
NVD6622E
NVD6623I
NVD6624E
NVD6625E
NVD6626E
NVD6627E
NVD6628E
NVD6629E
NVD6630E
NVD6631I
Log Message
“%s: ERROR DELETING DOMAIN <%s>, RC=<%d>”
“%s: ADMIN EXECUTE - OBJECT <ZADMIN> NOT FOUND”
“%s: ERROR GETTING FUNCTION, RC=<%d>”
“%s: INTERNAL ERROR: UNABLE TO ALLOCATE MEMORY”
“%s: COMMAND ARGUMENT IS INCORRECT”
“%s: ERROR RETRIEVING CLASS, ERROR IS <%s>”
“%s: ERROR RETRIEVING INSTANCE, PLEASE VERIFY THEDATABASE. ERROR=<%s>”
“%s: Problem getting %s Name from ADMIN Object, rc=<%d>. Setting toDefault.”
“%s: ERROR GETTING THE USER CLASS, RC=<%d>”
“%s: ERROR RETRIEVING INSTANCE= <%s> CLASS= <%s> DOMAIN=<%s>. PLEASE VERIFY DB AND CHECK INSTANCE SIZE”
“%s: Unable to notify <%s>, because <no user info in PROFILE available>.”
“%s: Unable to notify user <%s>, because <PROFILE.%s.ZMASTER.OBJECT is not available>.”
“%s: ERROR ADDING <%s> VARIABLE”
“%s: ERROR GETTING INSTANCE OBJECT LOCATION, RC=<%d>”
“%s: Unknown Instance name, Instance=<%s>. Setting Instance name toBase Instance”
“%s: ERROR GETTING CLASS, RC=<%d>”
“%s: ERROR PUTTING %s ON THE WIRE, RC=<%d>”
“%s: EMPTY INSTANCE <%s> FOUND PROCESSING IS TERMINATED”
“%s: BASE INSTANCE NOT PRESENT, CLASS=<%s>”
“%s: ERROR STORING CLASS %s, RC=<%d>”
“%s: ERROR STORING SEQUENCE_SENSITIVE FLAG TYPE, RC=<%d>”
“%s: NO CLASS RETRIEVED, ERROR IS <%s>”
“%s: Putting Class”
126 Chapter 2
MessageNumber
NVD6632I
NVD6633I
NVD6634E
NVD6635E
NVD6636E
NVD6637I
NVD6638E
NVD6639E
NVD6640I
NVD6641I
NVD6642E
NVD6643E
NVD6644E
NVD6645E
NVD6646E
NVD6647E
NVD6648E
NVD6649I
NVD6650E
NVD6651E
NVD6652E
Log Message
“%s: Buffer Size is <%d>”
“%s: Putting Instance”
“%s: UNABLE TO GET RESOURCE FILE NAME”
“%s: UNABLE TO GET RESOURCE FILE INFORMATION FOR <%s>, ERROR IS <%s>”
“%s: ERROR RETRIEVING RESOURCE DATA, ERROR IS <%s>”
“%s: GETOBJ - putting resource %s”
“%s: ERROR STORING VARIABLE, VARIABLE=<%8.8s>,OBJECT=<%8.8s>, RC=<%d>”
“%s: ERROR GETTING %s NAME FROM ADMIN OBJECT, RC=<%d>.SETTING TO DEFAULT”
“%s: No User Mask”
“%s: Mask <%s> Length <%d>”
“%s: ERROR %s <%s> DATA, ERROR IS <%s>”
“%s: ERROR RETRIEVING BASE INSTANCE DATA, ERROR IS <%s>”
“%s: ERROR GETTING DOMAIN DIRECTORY, RC <%d>”
“%s: ERROR GETTING CLASS, ERROR IS <%s>”
“%s: ERROR GETTING INSTANCE NAMES, ERROR IS <%s>”
“%s: ERROR GETTING CLASS, ERROR <%d>”
“%s: UNABLE TO RETRIEVE %s DATA FOR <%s>, IGNORED”
“%s: Class Name <%s.%s.%s>, class type <%c>”
“%s: INSTANCE DATA LENGTH READ OF <%d> BYTES IS LESS THAN EXPECTED LENGTH OF <%d> FOR INSTANCE <%s.%s.%s.%s>,IGNORED”
“%s: INSTANCE DATA LENGTH READ OF <%d> BYTES IS GREATERTHAN EXPECTED LENGTH OF <%d> FOR INSTANCE <%s.%s.%s.%s>,IGNORED”
“%s: UNABLE TO RETRIEVE CLASS DATA FOR <%s.%s.%s>,IGNORED”
CM Configuration Server Messages 127
MessageNumber
NVD6653E
NVD6654I
NVD6655I
NVD6656I
NVD6657I
NVD6658I
NVD6659I
NVD6660E
NVD6661I
NVD6662I
NVD6663E
NVD6664I
NVD6665I
NVD6666I
NVD6667I
NVD6668E
NVD6669E
NVD6670E
NVD6671I
NVD6672I
NVD6673I
NVD6674I
NVD6675W
NVD6676W
Log Message
“%s: INVALID REQUEST TYPE <%c> SPECIFIED IN LIST REQUESTFOR <%s.%s.%s>”
“%s: Rulechk - rule <%s> name <%s> size <%d>”
“%s: InstanceNameFilter - rule <%s> name <%s>”
“%s: Building component rules filters for <%s.%s.%s>”
“%s: Added component rules filter <%s> <%d> <%s>”
“%s: Built <%lu> component rules filters for <%s.%s.%s>”
“%s: Received from varsort, rc=<%d>”
“%s: ERROR FROM edmmapi_put_var, OBJ=<%s>, VAR=<%s>,HEAP=<%d>”
“%s: Sending Default Mask”
“%s: heap count=<%d>”
“%s: UNABLE TO DELETE OBJECT=<%s>”
“%s: Object <%s> deleted”
“%s: %s - getting class”
“%s: Number of heaps %d”
“%s; Getting instance”
“%s: OBJECT <%s> NOT FOUND”
“%s: BUILD PATCH ERROR, ATTRIBUTE <%0.8s.%0.8s> WAS NOT FOUND”
“%s: ERROR CLEARING <%s> VARIABLE”
“%s: PROMOTE started for <%s>”
“%s: PROMOTE ended for <%s>, rc <%d>, duration <%1.3f> seconds”
“%s: DPROMOTE started for <%s>”
“%s: DPROMOTE ended for <%s>, rc <%d>, duration <%1.3f> seconds”
“%s: Promote cannot retrieve instance name from ZADMINST, rc=<%d>, trying ZOBJNAME”
“%s: Promote cannot retrieve instance name from ZOBJNAME, rc=<%d>”
128 Chapter 2
Log Message
“%s: PROMOTE CANNOT RETRIEVE INSTANCE NAME, BOTH ZADMINST AND ZOBJNAME ARE UNDEFINED”
“%s: ZPROMANY started for <%s>”
“%s: ZPROMANY ended for <%s>, rc <%d>, duration <%1.3f> seconds”
“%s: ERROR UPDATING INSTANCE VIA ZPROMANY, RC=<%d>”
“%s: end ZPROMANY”
“%s: ERROR RETRIEVING OBJECT ID, RC=<%d>”
“%s: PROMOTE - Object ID=<%s>”
“%s: ERROR GETTING CLASS INFO, RC=<%d>”
“%s: PROMOTE - fdci <%s.%s.%s.%s>”
“%s: PROMOTE - PromoteObj begin”
“%s: ERROR GETTING RESOURCE DIRECTORY, RC=<%d>”
“%s: PromoteObj started for <%s>”
“%s: ERROR PROMOTING <%s.%s.%s.%s>, RC <%d>”
“%s: ERROR WRITING %s DATA, ERROR IS <%s>”
“%s: ERROR UNLOCKING %s, ERROR IS <%s>”
“%s: ERROR GETTING <%ld> BYTE BUFFER FRO PROMOTE”
“%s: ERROR LOCKING CLASS FOR <%s.%s.%s.%s>, ERROR IS <%s>”
“%s: ERROR %s CLASS DATA FOR <%s.%s.%s.%s>, ERROR IS <%s>”
“%s: ERROR UNLOCKING CLASS FOR <%s.%s.%s.%s>, ERROR IS <%s>”
“%s: No Patches to be processed”
“%s: %0.8s.BLDPATCH = <%s>, building PATCHES”
“%s: %0.8s Building PATCHES for <%s> and <%s>”
“%s: %0.8s.ZADMDINS = <%s>, no patches will be built for <%s.%s.%s.%s>”
6700-6799 General Method Messages
“%s: ObjInfo <%s.%s.%s.%s>”
MessageNumber
NVD6677E
NVD6678I
NVD6679I
NVD6680E
NVD6681I
NVD6682E
NVD6683I
NVD6684E
NVD6685I
NVD6686I
NVD6687E
NVD6688I
NVD6689E
NVD6690E
NVD6691E
NVD6692E
NVD6693E
NVD6694E
NVD6695E
NVD6696I
NVD6697I
NVD6698I
NVD6699I
NVD6700I
CM Configuration Server Messages 129
MessageNumber
NVD6701I
NVD6702I
NVD6703E
NVD6704I
NVD6705I
NVD6706E
NVD6707E
NVD6708E
NVD6709I
NVD6710E
NVD6711E
NVD6712E
NVD6713E
NVD6714E
NVD6715E
NVD6716E
NVD6717E
NVD6718E
NVD6719I
NVD6720W
Log Message
“%s: PromotePkt <%s.%s.%s.%s>”
“%s: Promoting New Resource <%s.%s.%s.%s>”
“%s: PROMOTE ERROR VALIDATING RESOURCE <%s.%s.%s.%s>,<%s>”
“%s: Re-Promoting Existing Resource <%s.%s.%s.%s>”
“%s: Old Resource prefix <%8.8s><%8.8s><%8.8s><%32.32s>”
“%s: PROMOTE ERROR, EXISTING RESOURCE PREFIX C.I <%-8.8s.%-32.32s> DOES NOT MATCH <%-8.8s.%-32.32s>”
“%s: PROMOTE ERROR, EXISTING RESOURCE PREFIX SIZE <%lu> IS LESS THAN EXPECTED SIZE <%lu>”
“%s: PROMOTE ERROR, EXISTING RESOURCE <%s.%s.%s.%s> WILL NOT BE REPLACED”
“%s: New Resource prefix <%8.8s><%8.8s><%8.8s><%32.32s>”
“%s: PROMOTE ERROR %s RESOURCE <%s.%s.%s.%s>, ERROR <%s>”
“%s: PROMOTE RESTART ERROR READING <%s.%s.%s.%s>, ERROR<%s>”
“%s: PROMOTE RESTART ERROR READING <%s.%s.%s.%s>, PREFIXBYTES READ <%lu>”
“%s: PROMOTE RESTART NOT POSSIBLE FOR <%s.%s.%s.%s>”
“%s: OLD RESOURCE PREFIX IS <%0.*s><%0.*s><%0.*s><%0.*s>”
“%s: NEW RESOURCE PREFIX IS <%0.*s><%0.*s><%0.*s><%0.*s>”
“%s: PROMOTE RESTART ERROR READING <%s.%s.%s.%s>, EOF OFFSET <%lu>, RESTART OFFSET <%lu>”
“%s: PROMOTE ERROR, RESETTING RESOURCE <%s.%s.%s.%s> SIZE TO <%lu>, ERROR <%s>”
“%s: PROMOTE ERROR ON MAP FILE %s, RESOURCE <%s.%s.%s.%s>, ERROR <%d>”
“%s: File mapping handle <%08X>, view <%08X>, offset <%08X%08X>,bytes <%08X>”
“%s: Promote data size is zero, rc <%d>”
130 Chapter 2
MessageNumber
NVD6721E
NVD6722I
NVD6723I
NVD6724E
NVD6725I
NVD6726W
NVD6727W
NVD6728E
NVD6729E
NVD6730I
NVD6731E
NVD6732I
NVD6733E
NVD6734E
NVD6735E
NVD6736E
NVD6737E
NVD6738E
NVD6739E
NVD6740E
NVD6741E
NVD6742I
Log Message
“%s: ERROR RECEIVING PROMOTE DATA FOR <%s.%s.%s.%s>, RC <%d>, LENGTH <%d>”
“%s: Promoted <%lu> bytes of <%lu> in <%1.3f> seconds, current Kbps <%1.3f>”
“%s: Promoted <%lu> bytes in <%1.3f> seconds, average Kbps <%1.3f>”
“%s: PROMOTE ERROR ON UNMAP FILE %s, RESOURCE<%s.%s.%s.%s>, ERROR <%d>”
“%s: Promote complete for <%s.%s.%s.%s>, size <%lu>, duration <%1.3f> seconds”
“%s: Missing %s Variable”
“%s: ZRSCDATE contains an invalid date <%s>”
“%s: ERROR SETTING RESOURCE DATE TIME <%s> <%s>”
“%s: <%s>.<%s>.<%s>.<%s>”
“%s: Multiple Instance PROMANY - start”
“%s: MULTIPLE INSTANCE PROMANY ERROR GETTING %s FROM THE WIRE, RC=<%d>”
“%s: Multiple Instance PROMANY - getting instance”
“%s: MULTIPLE INSTANCE PROMANY ERROR PUTTING %s TO THE WIRE, RC=<%d>”
“%s: ERROR UPDATING INSTANCE VIA MULTIPLE INSTANCEPROMANY, RC=<%d>”
“%s: BUILD PATCH ERROR, ATTRIBUTE <%0.8s.%0.8s> IS BLANK”
“%s: ERROR UPDATING INSTANCE, RC=<%d>”
“%s: ERROR UPDATING CLASS DATA, ERROR=<%s>”
“%s: ERROR UNLOCKING CLASS, ERROR=<%s>”
“%s: ERROR RETRIEVING CLASS DATA, ERROR=<%s>”
“%s: ERROR RETRIEVING CLASS NAME, RC=<%d>”
“%s: ERROR RETRIEVING CLASS TYPE, RC=<%d>”
“%s: Template from wire with prefix from Class Record(_CLASS_):”
CM Configuration Server Messages 131
MessageNumber
NVD6743I
NVD6744E
NVD6745E
NVD6746I
NVD6747I
NVD6748I
NVD6749E
NVD6750I
NVD6751I
NVD6752E
NVD6753E
NVD6754E
NVD6755E
NVD6756E
NVD6757I
NVD6758I
NVD6759I
NVD6760E
NVD6761I
NVD6762E
NVD6763I
NVD6764E
NVD6765I
NVD6766I
NVD6767E
NVD6768I
Log Message
“%s: Heap from wire (_BASE_INSTANCE_):”
“%s: ERROR UPDATING CLASS FILES”
“%s: EROR WRITING ZBASE CLASS FOR DM UPDATE, ERROR=<%s>”
“%s: Time/Date stamps are equal”
“%s: Backup F.D.C.I = %s.%s.%s.%s”
“%s: Update F.D.C.I = %s.%s.%s.%s”
“%s: ERROR RETRIEVING OLD CLASS, RC=<%d>”
“%s: Old Class:”
“%s: New Class:”
“%s: ERROR CREATING TEMPORARY DIRECTORY, RC=<%d>”
“%s: ERROR RETRIEVING INSTANCE FROM CLASS=<%s>”
“%s: ERROR RETRIEVING OLD INSTANCE, RC=<%d>”
“%s: BAD FLAG VALUE - INTERNAL ERROR, FLAG=<%d>”
“%s: ERROR UPDATING INSTANCE FROM CLASS=<%s>”
“%s: Old Instance:”
“%s: New Instance:”
“%s: Update Class - Deleted Fields Detected”
“%s: ERROR UPDATING NEW CLASS <%s.%s.%s>, RC=<%d>”
“%s: PutObj of New Class <%s.%s.%s> Successful”
“%s: ERROR RENAMING CLASS <%s> TO CLASS <%s>; ERROR <%s>”
“%s: Rename of Class <%s> to Class <%s> Successful”
“%s: ERROR DELETING OLD CLASS <%s.%s.%s>, ERROR <%s>”
“%s: Delete of Old Class <%s> successful”
“%s: Deleting Old Class <%s.%s.%s> Successful”
“%s: ERROR SAVING NEW CLASS <%s.%s.%s>, ERROR <%s>”
“%s: PutObj of New Class <%s.%s.%s> Successful”
132 Chapter 2
MessageNumber
NVD6769E
NVD6770I
NVD6771E
NVD6772E
NVD6773W
NVD6774E
NVD6775I
NVD6776I
NVD6777E
NVD6778W
NVD6779I
NVD6780E
NVD6781E
NVD6782E
NVD6783I
NVD6784E
NVD6785I
NVD6786I
NVD6787I
NVD6788I
NVD6789I
NVD6790W
NVD6791W
NVD6792W
NVD6793E
Log Message
“%s: ERROR RETRIEVING <%s.%s.%s> INSTANCE DATA, ERROR<%s>”
“%s; VEROBJ - Start”
“%s: ERROR GETTING OBJECT INFORMATION, RC=<%d>”
“%s: RULES DENIED ON %s VEROBJ”
“%s: VEROBJ rc=[%d], Domain exists”
“%s: UNKNOWN OBJECT, VEROBJ FAILED, RC=<%d>”
“%s: Admin Method”
“%s: %72.72s”
“%s: UNABLE TO ALLOCATE DI CONTROL BLOCK”
“%s: Unable to delete object <%8.8s>, rc =<%d>”
“%s: Delete of object <%8.8s> successful”
“%s: ERROR SETTING ZOBJID TO 000000000000, RC=<%d>”
“%s: TYPE NOT PROVIDED - SETTING TO DEFAULT, RC=<%d>”
“%s: ERROR GETTING FUNCTION, RC=<%d>”
“%s: Processing Request <%s>”
“%s: UNKNOWN ADMIN FUNCTION <%s>”
“%s: Request=<%s>, DB Object=<%.8s.%.32s.%.8s.%.32s>”
“%s: Request=<%s>, DB Object=<%.8s.%.32s.%.8s.%.32s>, DB ObjectTo=<%.8s.%.32s.%.8s.%.32s>”
“%s: Domain <%s.%s> was not found”
“%s: Class <%s.%s.%s> was not found”
“%s: Instance <%s.%s.%s.%s> was not found”
“%s: Domain <%s.%s> was not found”
“%s: Class <%s.%s.%s> was not found”
“%s: Instance <%s.%s.%s.%s> was not found”
“%s: DOMAIN <%s.%s> WAS NOT FOUND”
CM Configuration Server Messages 133
Log Message
“%s: CLASS <%s.%s.%s> WAS NOT FOUND”
“%s: INSTANCE <%s.%s.%s.%s> WAS NOT FOUND”
6800-6899 General Method Messages
“%s: Missing package name filter for component instance <%s.%s.%s.%s>”
“%s: RULES DENY <%s> <%s> ACCESS TO INSTANCE <%s.%s.%s.%s>”
“%s: RULES DENY <%s> <%s> ACCESS TO CLASS <%s.%s.%s>”
“%s: RULES DENY <%s> <%s> ACCESS TO DOMAIN <%s.%s>”
“%s: RULES DENY <%s> <%s> ACCESS TO FILE <%s.%s>”
“%s: RULES DENY <%s> <%s> ACCESS TO PACKAGE <%s.%s.%s.%s>”
“%s: RULES DENY <%s> <%s> ACCESS TO RESOURCE <%s.%s.%s.%s>”
“%s: RULES DENY <%s> <%s> ACCESS TO UPDATE CLASS<%s.%s.%s.%s>”
“%s: RULES DENY <%s> <%s> ACCESS TO <%s.%s.%s.%s>”
“%s: PACKAGE RULES DENY <%s> <%s> ACCESS TO COMPONENT<%s.%s.%s.%s>”
“%s: Package rules allow <%s> <%s> access to component <%s.%s.%s.%s>”
“%s: Rules allow <%s> <%s> access to instance <%s.%s.%s.%s>”
“%s: Rules allow <%s> <%s> access to class <%s.%s.%s>”
“%s: Rules allow <%s> <%s> access to domain <%s.%s>”
“%s: Rules allow <%s> <%s> access to file <%s.%s>”
“%s: Rules allow <%s> <%s> access to package <%s.%s.%s.%s>”
“%s: Rules allow <%s> <%s> access to resource <%s.%s.%s.%s>”
“%s: Rules allow <%s> <%s> access to update class <%s.%s.%s.%s>”
“%s: Rules allow <%s> <%s> access to <%s.%s.%s.%s>”
6900-6999 Package Consolidation
“Package consolidation verification from <%s> to <%s> begins”
“Package consolidation preview from <%s> to <%s> begins”
MessageNumber
NVD6794E
NVD6795E
NVD6800W
NVD6801E
NVD6802E
NVD6803E
NVD6804E
NVD6805E
NVD6806E
NVD6807E
NVD6808E
NVD6809E
NVD6810I
NVD6811I
NVD6812I
NVD6813I
NVD6814I
NVD6815I
NVD6816I
NVD6817I
NVD6818I
NVD6900I
NVD6901I
134 Chapter 2
MessageNumber
NVD6902I
NVD6903I
NVD6904I
NVD6905I
NVD6909I
NVD6910I
NVD6911E
NVD6913E
NVD6914E
NVD6915I
NVD6916I
NVD6920I
NVD6921E
NVD6923E
NVD6925I
NVD6926I
NVD6930I
NVD6933E
NVD6934E
NVD6935I
NVD6936I
NVD6940I
Log Message
“Package consolidation copy from <%s> to <%s> begins”
“Pkgcons replacing existing package <%s.%s.%s.%s>“
“Pkgcons resolving <%s> for generic <%s>“
“Pkgcons resolving <%s>“
“Pkgcons resolution complete for <%s>“
“Pkgcons expression <%8.8s> <%c> <%s>“
“PACKAGE CONSOLIDATION UNABLE TO PROCESS SUBSTITUTIONS IN EXPRESSION <%s>“
“PACKAGE CONSOLIDATION FOUND INVALID OR UNSUPPORTEDTYPE <%c> IN EXPRESSION <%s>“
“PACKAGE CONSOLIDATION EXPRESSION MISMATCH WITH PARENT <%s>“
“Pkgcons will substitute <%s> with <%s>“
“Pkgcons has substituted <%s> with <%s>“
“Pkgcons connection <%8.8s> <%c> <%s>“
“PACKAGE CONSOLIDATION UNABLE TO PROCESS SUBSTITUTIONS IN CONNECTION <%s>“
“PACKAGE CONSOLIDATION FOUND INVALID OR UNSUPPORTEDTYPE <%c> IN CONNECTION <%s>“
“Pkgcons will substitute <%s> with <%s>“
“Pkgcons has substituted <%s> with <%s>“
“Pkgcons method <%8.8s> <%c> <%s>“
“PACKAGE CONSOLIDATION FOUND INVALID OR UNSUPPORTEDTYPE <%c> IN METHOD <%s>“
“PACKAGE CONSOLIDATION METHOD MISMATCH WITH PARENT<%s>“
“Pkgcons will substitute <%s> with <%s>“
“Pkgcons has substituted <%s> with <%s>“
“Pkgcons noop <%8.8s> <%c> <%s>“
CM Configuration Server Messages 135
MessageNumber
NVD6945I
NVD6946I
NVD6950I
NVD6953E
NVD6954E
NVD6955I
NVD6956I
NVD6960W
NVD6961E
NVD6962E
NVD6963E
NVD6964E
NVD6965E
NVD6966E
NVD6967E
NVD6968E
NVD6969E
NVD6990I
NVD6991I
NVD6992I
NVD6998E
NVD6999I
Log Message
“Pkgcons will substitute <%s> with <%s>“
“Pkgcons has substituted <%s> with <%s>“
“Pkgcons variable <%8.8s> <%c> <%s>“
“PACKAGE CONSOLIDATION FOUND INVALID OR UNSUPPORTEDTYPE <%c> IN VARIABLE <%8.8s>“
“PACKAGE CONSOLIDATION VARIABLE DATA MISMATCH WITHPARENT <%s>“
“Pkgcons will substitute <%s> with <%s>“
“Pkgcons has substituted <%s> with <%s>“
“Pkgcons found resource <%s.%s.%s.%s> already exists, trying new object ID”
“PKGCONS ERROR, CANNOT LOCK (EXCLUSIVE) <%s.%s.%s.%s>“
“PKGCONS ERROR, CANNOT LOCK (SHARE) <%s.%s.%s.%s>“
“PKGCONS ERROR, CANNOT UNLOCK <%s.%s.%s.%s>“
“PKGCONS ERROR, CANNOT READ <%d> BYTES FROM<%s.%s.%s.%s>“
“PKGCONS ERROR, CANNOT WRITE <%d> BYTES TO <%s.%s.%s.%s>“
“PKGCONS ERROR, CANNOT DECOMPRESS <%s.%s.%s.%s> <%s>“
“PKGCONS ERROR, CANNOT COMPRESS <%s.%s.%s.%s> <%s>“
“PKGCONS ERROR, CANNOT FIND <%s.%s.%s.%s>“
“PKGCONS ERROR, COPY FAILED FROM <%s> TO <%s.%s.%s.%s>“
“Package consolidation verification complete, rc <%d>“
“Package consolidation preview complete, rc <%d>“
“Package consolidation copy complete, rc <%d>“
“PACKAGE CONSOLIDATION FAILURE, RC <%d>, DURATION <%1.3f> SECONDS”
“Package consolidation successful, rc <%d>, duration <%1.3f> seconds”
136 Chapter 2
Log Message
7001-7080 Find
“ERROR: FILE <%s> NOT FOUND”
“Warning: File <%s> Not Found”
“ERROR: DOMAIN <%s.%s> NOT FOUND”
“Warning: Domain <%s.%s> Not Found”
“ERROR: CLASS <%s.%s.%s> NOT FOUND”
“Warning: Class <%s.%s.%s> Not Found”
“ERROR: INSTANCE <%s.%s.%s.%s> NOT FOUND”
“Warning: Instance <%s.%s.%s.%s> Not Found”
“ERROR, CANNOT LOCK (EXCLUSIVE) FILE <%s>“
“ERROR, CANNOT LOCK (EXCLUSIVE) DOMAIN <%s.%s>“
“ERROR, CANNOT LOCK (EXCLUSIVE) CLASS <%s.%s.%s>“
“ERROR, CANNOT LOCK (SHARE) CLASS <%s.%s.%s>“
“ERROR, CANNOT LOCK (EXCLUSIVE) INSTANCE <%s.%s.%s.%s>“
“ERROR, CANNOT LOCK (SHARE) INSTANCE <%s.%s.%s.%s>“
“ERROR, CANNOT UNLOCK FILE <%s>“
“ERROR, CANNOT UNLOCK DOMAIN <%s.%s>“
“ERROR, CANNOT UNLOCK CLASS <%s.%s.%s>“
“ERROR, CANNOT UNLOCK INSTANCE <%s.%s.%s.%s>“
“ERROR, CANNOT READ <%d> BYTES FROM FILE <%s>“
“ERROR, CANNOT READ <%d> BYTES FROM DOMAIN <%s.%s>“
“ERROR, CANNOT READ <%d> BYTES FROM CLASS <%s.%s.%s>“
“ERROR, CANNOT READ <%d> BYTES FROM INSTANCE<%s.%s.%s.%s>“
“ERROR, CANNOT WRITE <%d> BYTES TO FILE <%s>“
“ERROR, CANNOT WRITE <%d> BYTES TO DOMAIN <%s.%s>“
MessageNumber
NVD7001E
NVD7002W
NVD7003E
NVD7004W
NVD7005E
NVD7006W
NVD7007E
NVD7008W
NVD7009E
NVD7010E
NVD7011E
NVD7012E
NVD7013E
NVD7014E
NVD7015E
NVD7016E
NVD7017E
NVD7018E
NVD7019E
NVD7020E
NVD7021E
NVD7022E
NVD7023E
NVD7024E
CM Configuration Server Messages 137
MessageNumber
NVD7025E
NVD7026E
NVD7027I
NVD7028I
NVD7029I
NVD7030E
NVD7031E
NVD7032E
NVD7033E
NVD7034E
NVD7035E
NVD7036E
NVD7037W
NVD7038I
NVD7039E
NVD7040E
NVD7041E
NVD7042E
NVD7043E
NVD7044E
NVD7045E
NVD7046E
NVD7047E
NVD7048E
NVD7049E
Log Message
“ERROR, CANNOT WRITE <%d> BYTES TO CLASS <%s.%s.%s>“
“ERROR, CANNOT WRITE <%d> BYTES TO INSTANCE <%s.%s.%s.%s>“
“Using Cached Class <%s.%s.%s>“
“Using Cached Instance <%s.%s.%s.%s>“
“Using Cached Base Instance <%s.%s.%s.%s>“
“ERROR, CACHED INSTANCE UPDATE FOR <%s.%s.%s.%s> FAILED”
“ERROR, CANNOT LOCK (EXCLUSIVE) RESOURCE <%s.%s.%s.%s>“
“ERROR, CANNOT LOCK (SHARE) RESOURCE <%s.%s.%s.%s>“
“ERROR, CANNOT UNLOCK RESOURCE <%s.%s.%s.%s>“
“ERROR, CANNOT READ <%d> BYTES FROM RESOURCE<%s.%s.%s.%s>“
“ERROR, CANNOT WRITE <%d> BYTES TO RESOURCE <%s.%s.%s.%s>“
“ERROR, RESOURCE <%s.%s.%s.%s> NOT FOUND”
“WARNING, Resource <%s.%s.%s.%s> Not Found”
“Class DMN <%s> CLS <%s>“
“ERROR PROCESSING DELETE: File <%s> Domain <%s> Class <%s> Instance <%s>“
“ERROR <%d> ADDING FILE F<%s>“
“ERROR <%d> ADDING DOMAIN D<%s>“
“ERROR <%d> CREATING CLASS D<%s> C<%s>“
“ERROR <%d> LOCKING FILE D<%s> C<%s> I<%s>“
“ERROR DELETING DOMAIN <%s.%s>“
“ERROR DELETING CLASS <%s.%s.%s>“
“ERROR DELETING INSTANCE <%s.%s.%s.%s>“
“ERROR DELETING RESOURCE <%s.%s.%s.%s>“
“ERROR LOCKING CLASS <%s.%s.%s>, RC<%d>“
“ERROR UNLOCKING CLASS <%s.%s.%s>, RC<%d>“
138 Chapter 2
MessageNumber
NVD7050E
NVD7051E
NVD7052E
NVD7053I
NVD7054I
NVD7055I
NVD7056E
NVD7057E
NVD7058E
NVD7059E
NVD7060E
NVD7061E
NVD7062E
NVD7063E
NVD7064E
NVD7065E
NVD7066E
NVD7067E
NVD7068E
NVD7069E
Log Message
“ERROR LOCKING OBJECT <%s.%s.%s.%s>, RC<%d>“
“ERROR READING INSTANCE <%s.%s.%s.%s>, RC<%d>“
“ERROR UNLOCKING OBJECT <%s.%s.%s.%s>, RC<%d>“
“Instance <%s.%s.%s.%s> not cached”
“Class <%s.%s.%s.%s> not cached”
“Base Instance <%s.%s.%s.%s> not cached”
“ERROR, UNABLE TO WRITE <%s> STATS, BECAUSE <%s %s DOES NOT EXIST>“
“ERROR, UNABLE TO WRITE <%s> STATS, BECAUSE <Class %s IS NOT LOCKING>“
“ERROR, UNABLE TO WRITE <%s> STATS, BECAUSE <ClassTEMPLATE IS NOT AVAILABLE>“
“ERROR, UNABLE TO WRITE <%s> RETRY, BECAUSE <Class %s NOT FOUND>“
“ERROR READING CLASS HEADER (%d BYTES) OF CLASS <%s.%s.%s>. (RC = <%d>)”
“ERROR, DB ERROR <%s> WAS DISCOVERED WHILE PROCESSING<%s.%s> CLASS. CM CONFIGURATION SERVER MAY SHUTDOWN!”
“ERROR, SHUTTING DOWN CM CONFIGURATION SERVER BECAUSEOF DATABASE ERROR!”
“ERROR, INVALID CLASS SIZE <%s.%s.%s>“
“ERROR READING HEADER RECORD (%d BYTES) OF CLASS<%s.%s.%s>. (RC = <%d>)”
“ERROR UNLOCKING CLASS TEMPLATE <%s.%s.%s>, RC<%d>“
“ERROR, UNABLE TO LOCK INSTANCE <%s.%s.%s.%s>, RC <%d>“
“ERROR, UNABLE TO WRITE INSTANCE <%s.%s.%s.%s>, RC<%d>“
“ERROR, UNABLE TO UNLOCK INSTANCE <%s.%s.%s.%s>, RC<%d>“
“ERROR READING CLASS TEMPLATE <%s.%s.%s>, RC <%d>”
CM Configuration Server Messages 139
Log Message
7081-7099 Invalid Name
“ERROR, INVALID INSTANCE NAME <%s>“
“ERROR, INVALID CLASS NAME <%s>“
“ERROR, INVALID DOMAIN NAME <%s>“
“ERROR, INVALID FILE NAME <%s>“
“ERROR, INVALID INSTANCE <%s.%s.%s.%s> SIZE <%d> TOO SMALL”
7090-7099 Database Path Errors
“ERROR, DATABASE PATH <%s> IS UNAVAILABLE, REASON <%s>”
“ERROR, DATABASE HAS BEEN HARDLOCKED”
“ERROR, MONITORING FOR DATABASE PATH ACCESSIBILITY TO BERESTORED”
“ERROR, DATABASE PATH ACCESSIBILITY HAS NOT BEEN RESTORED, MANAGER WILL BE SHUT DOWN”
“Database Path Accessibility has been restored, Database Status is <%s>”
7100-7199 Database Prefix
“ERROR, UNABLE TO GET CONTROL INFORMATION FOR INSTANCE <%s.%s.%s.%s>“
“ERROR, UNABLE TO GET CONTROL INFORMATION FOR CLASS<%s.%s.%s>“
“ERROR, UNABLE TO GET CONTROL INFORMATION FOR DOMAIN <%s.%s>“
“ERROR, UNABLE TO GET CONTROL INFORMATION FOR FILE <%s>“
“ERROR, UNABLE TO UPDATE CONTROL INFORMATION FOR INSTANCE <%s.%s.%s.%s>“
“ERROR, UNABLE TO UPDATE CONTROL INFORMATION FOR CLASS<%s.%s.%s>“
“ERROR, UNABLE TO UPDATE CONTROL INFORMATION FOR DOMAIN <%s.%s>“
MessageNumber
NVD7081E
NVD7082E
NVD7083E
NVD7084E
NVD7085E
NVD7090E
NVD7091E
NVD7092E
NVD7093E
NVD7094I
NVD7101E
NVD7102E
NVD7103E
NVD7104E
NVD7105E
NVD7106E
NVD7107E
140 Chapter 2
Log Message
“ERROR, UNABLE TO UPDATE CONTROL INFORMATION FOR FILE <%s>“
“ERROR, INVALID CONTROL INFORMATION FOR INSTANCE<%s.%s.%s.%s>“
“ERROR, INVALID CONTROL INFORMATION FOR CLASS <%s.%s.%s>“
“ERROR, INVALID CONTROL INFORMATION FOR DOMAIN <%s.%s>“
“ERROR, INVALID CONTROL INFORMATION FOR FILE <%s>“
“UPDATE_FILE_CONTROL_INFO started”
“UPDATE_FILE_CONTROL_INFO ended”
“UNABLE TO CREATE RETRY DOMAIN”
“UNABLE TO CREATE <NOTIFY.RETRY.NOTIFY> Class”
“ERROR WRITING <RETRY> Class PREFIX”
“ERROR WRITING <RETRY> Class HEADER %s”
“UNABLE TO CREATE CLASS <%s.%s.%s>“
“Class <%s.%s.%s> prefix dates updated successfully”
7200-7299 Control
“SOFTLOCKED! (exclusive)”
“SOFTLOCKED! shared count=<%d>“
“ERROR: UNABLE TO OBTAIN TIMESTAMP”
“Warning, Timed out waiting for ADMIN to end”
“UNLOCKED! (DMA_TIMEOUT)”
“SOFTLOCKED! shared count=<%d> (DMA_TIMEOUT)”
“HARDLOCKED!”
“SOFTLOCKED! <%s> (hardlock timed out)”
“UNLOCKED!”
“Warning, UNLOCK request with count=0 ignored”
“ERROR, UNABLE TO UPDATE CONTROL BUFFER, RC = <%d>“
MessageNumber
NVD7108E
NVD7109E
NVD7110E
NVD7111E
NVD7112E
NVD7113I
NVD7114I
NVD7115E
NVD7116E
NVD7117E
NVD7118E
NVD7119E
NVD7120I
NVD7201I
NVD7202I
NVD7203E
NVD7204W
NVD7205W
NVD7206I
NVD7207I
NVD7208I
NVD7209I
NVD7210W
NVD7211E
CM Configuration Server Messages 141
Log Message
“ERROR, UNABLE TO ADD CONTROL RECORD”
“UNABLE, TO LOCK CONTROL FILE”
“ERROR, UNABLE TO READ CONTROL ENTRY SIZE <%d> BYTESREAD <%d>“
“UNKNOWN CONTROL UPDATE TYPE <%s>“
“ERROR LOCKING <RETRY> Class”
“ERROR LOCKING CLASS <%s.%s.%s>“
“Pending HARDLOCK!”
“ERROR, CLASS <%s.%s.%s> LOCK ERROR WHILE UPDATING CLASS PREFIX”
“ERROR, CLASS <%s.%s.%s> WRITE ERROR WHILE UPDATING CLASS PREFIX”
“ERROR, CLASS <%s.%s.%s> UNLOCK ERROR WHILE UPDATINGCLASS PREFIX”
7300-7399 DMA
“Starting <%s>“
“VARGET ERROR DMAFUNC NOT FOUND FOR <%s>“
“Processing CM Distributed Configuration Server Function <%s>“
“ERROR, INCONSISTENT LOCK STATE/COUNT: STATE=%c COUNT=%d”
“Could not reset CM Distributed Configuration Server timeout=<%d> secs”
“Ending <%s>“
“SoftLock Starting”
“Creating DMA_Handle”
“THE DMAHandle <%s> ALREADY EXISTS. INTERNAL ERROR”
“New DMAHandle created: <%s>“
“FAILED TO CREATE NEW DMAHandle: <%s>“
MessageNumber
NVD7212E
NVD7213E
NVD7214E
NVD7215E
NVD7216E
NVD7217E
NVD7218I
NVD7219E
NVD7220E
NVD7221E
NVD7300I
NVD7301E
NVD7302I
NVD7303E
NVD7304W
NVD7305I
NVD7306I
NVD7307I
NVD7308E
NVD7309I
NVD7310E
142 Chapter 2
MessageNumber
NVD7311I
NVD7312I
NVD7313E
NVD7314E
NVD7315E
NVD7316I
NVD7317E
NVD7318E
NVD7319I
NVD7320I
NVD7321E
NVD7322E
NVD7323E
NVD7324E
NVD7325I
NVD7326E
NVD7327E
NVD7328E
NVD7329E
NVD7330W
NVD7331I
NVD7332I
NVD7333I
Log Message
“Restarting CM Distributed Configuration Server staging for handle = <%s>“
“Starting CM Distributed Configuration Server staging for handle = <%s>“
“%s <%s>: NOT FOUND IN STAGING AREA <%s>“
“%s <%s>: STAGE FILE <%s> DELETE FAILED”
“%s <%s> FROM STAGING AREA <%s>: DIRECTORY DELETE FAILED”
“Removed CM Distributed Configuration Server Stage Handle -- <%s> from staging area <%s>“
“ERROR, CM DISTRIBUTED CONFIGURATION SERVER REQUESTFOR STANDALONE CM CONFIGURATION SERVER”
“CM DISTRIBUTED CONFIGURATION SERVER REQUEST RC=<%d>MSG=<%s>“
“Create Stage Filename <%s>“
“Create Stage Filename CRC <%s>“
“ERROR GETTING STAGE VARIABLES”
“ERROR, UNABLE TO CREATE STAGE FILENAME”
“ERROR WRITING <%d> BYTES TO STAGE OBJECT <%s>“
“CM DISTRIBUTED CONFIGURATION SERVER PUTOBJECT STAGEERROR”
“DMAStage Successfully ended”
“ERROR, UNABLE TO WRITE STAGE FILE”
“ERROR PROCESSING DUPLICATES”
“ERROR PROCESSING DELETES”
“ERROR PROCESSING ADDS”
“Warning, <%8.8s> marked duplicate”
“ACTION %6.6s”
“FILETYPE %8.8s”
“FILENAME %8.8s”
CM Configuration Server Messages 143
MessageNumber
NVD7334I
NVD7335I
NVD7336I
NVD7337I
NVD7338I
NVD7339I
NVD7340I
NVD7341I
NVD7342I
NVD7343I
NVD7344I
NVD7345I
NVD7346I
NVD7347W
NVD7348E
NVD7349I
NVD7350I
NVD7351I
NVD7352I
NVD7353E
NVD7354E
NVD7355E
NVD7356E
NVD7357E
Log Message
“DOMAIN %32.32s”
“CLASS %8.8s”
“INSTANCE %32.32s”
“STAGE_FILENAME %8.8s”
“DMA_BASE <%s>“
“STAGE_LOC <%s>“
“FILENAME <%s>“
“DOMAIN <%s>“
“CLASS <%s>“
“INSTANCE <%s>“
“STAGE_FILENAME <%s>“
“TYPE <%s>“
“FILE SIZE <%d>“
“Warning, Staging Duplicate File: <%s>“
“ERROR, UNABLE TO OPEN STAGE FILE FOR <%s>“
“No DELETES to be PROCESSED”
“No more DELETES to be PROCESSED”
“No ADDS to be PROCESSED”
“No more ADDS to be PROCESSED”
“ERROR GETTING STAGE OBJECT: FILE <%s> DOMAIN <%s> CLASS <%s> INSTANCE <%s>“
“ERROR UPDATING DATABASE: FILE <%s> DOMAIN <%s> CLASS <%s> INSTANCE <%s>“
“ERROR UPDATING CONTROL FILE: FILE <%s> DOMAIN <%s> CLASS <%s> INSTANCE <%s>“
“ERROR, DELETE FAILED FOR STAGEFILE <%s>“
“TREECRC FAILED RC <%d>“
144 Chapter 2
Log Message
“GetFileCRC <%s> FAILED RC <%d>“
“Starting TREECRC”
“Total CRC <%8lX>“
“Domain <%s> not found, no CRC”
“%s BASE INSTANCE NOT FOUND, CAN'T LOCK FOR CRC”
“Locking domain <%s>“
“Domain <%s> using cached total CRC=<%s>“
“DOMAIN <%s> CACHED TOTAL CRC NOT FOUND”
“UNABLE TO COMPRESS CRC FILE <%s>, RC=<%d>“
“UNABLE TO CREATE TOTAL.CRC FILE <%s>“
“Domain <%s> Total CRC: <%s>“
“Unable to create CRC subdir: <%s>“
“Domain <%s> simultaneous syncs with conflicting CRCLEVEL”
“Ending <%s>, rc = <%d>“
“Resource <%s.%s.%s> read failed”
“Unable to create temp file <%s>“
“Unable to write temp file <%s>“
“UNABLE TO DECOMPRESS %s, rc=%d”
“Cache Disabled”
“Cache Enabled”
“<%s> CRC LOCK ATTEMPT TIMED OUT”
“CM Distributed Configuration Server request no error RC=<%d>MSG=<%s>”
“%s, Request <%c>, F.D.C.I <%s.%s.%s.%s>, OID <%s>, old OID <%s>”
7400-7599 Object ID
“Initialize parms: global <%08X>, caller type <%d>, p_logmsg <%08X>“
MessageNumber
NVD7358E
NVD7359I
NVD7360I
NVD7361I
NVD7362E
NVD7363I
NVD7364I
NVD7365E
NVD7366E
NVD7367E
NVD7368I
NVD7369I
NVD7370I
NVD7371I
NVD7372I
NVD7373I
NVD7374I
NVD7375E
NVD7376I
NVD7377I
NVD7378E
NVD7379I
NVD7380I
NVD7400I
CM Configuration Server Messages 145
MessageNumber
NVD7402I
NVD7403E
NVD7406I
NVD7407E
NVD7409E
NVD7410I
NVD7411E
NVD7412I
NVD7413E
NVD7414I
NVD7415E
NVD7416E
NVD7417E
NVD7418I
NVD7419E
NVD7420I
NVD7421E
NVD7422E
NVD7423E
NVD7424E
NVD7425I
NVD7426I
NVD7427E
NVD7428I
Log Message
“Object ID cache handle allocated <%d> bytes at <%08X>“
“UNABLE TO ALLOCATE <%d> BYTES OF STORAGE FOR OID CACHEHANDLE”
“Attaching shared memory ID <%d>”
“ERROR, NULL POINTER RETURNED BY zsys_attachSharedMem <%d>“
“ERROR, OBJECT ID CACHE IS FULL”
“Cleanup oid_handle at <%08X>”
“ERROR <%d> RETURNED BY zsys_lockMutexSemaphore <%d>“
“Detaching shared memory ID <%d> at <%08X>“
“ERROR <%d> RETURNED BY zsys_detachSharedMem <%d>“
“Removing shared memory ID <%d>“
“ERROR <%d> RETURNED BY zsys_removeSharedMem <%d>“
“ERROR <%d> RETURNED BY zsys_unlockMutexSemaphore <%d>“
“ERROR <%d> RETURNED BY zsys_removeMutexSemaphore <%d>“
“Object ID cache handle free <%d> bytes at <%08X>“
“ERROR, INVALID OBJECT ID <%0.12s>“
“Getting DMA counts from <%s.%s.%s.%s>“
“ERROR <%d> LOCKING CLASS <%s.%s.%s.%s>“
“ERROR <%d> READING CLASS <%s.%s.%s.%s>“
“ERROR <%d> UNLOCKING CLASS <%s.%s.%s.%s>“
“UNABLE TO OBTAIN DMA CLASS CONTROL INFORMATION FROM<%s.%s.%s.%s>“
“DMA counts from <%s.%s.%s.%s>, Domains <%lu>, Classes <%lu>, Instances <%lu>“
“Total counts for <%s>, Domains <%lu>, Classes <%lu>, Instances <%lu>“
“ERROR <%d> READING DOMAINS FOR FILE <%s>“
“Loaded <%lu> class object id's for domain <%s.%s>“
146 Chapter 2
MessageNumber
NVD7429E
NVD7430E
NVD7431E
NVD7432E
NVD7433I
NVD7434E
NVD7435E
NVD7436E
NVD7437E
NVD7438I
NVD7439E
NVD7440E
NVD7441I
NVD7442E
NVD7443E
NVD7444E
NVD7445W
NVD7446W
NVD7447W
NVD7448I
NVD7449I
NVD7450W
NVD7451W
Log Message
“ERROR <%d> CLOSING DOMAIN FIND HANDLE FOR <%s>“
“ERROR <%d> READING CLASSES FOR DOMAIN <%s.%s>“
“ERROR <%d> READING CLASS PREFIX FOR <%s.%s.%s.%s>“
“ERROR READING CLASS PREFIX FOR <%s.%s.%s.%s>, SIZE READ<%d>, EXPECTED <%d>“
“Loaded <%lu> instance object IDs for class <%s.%s.%s>“
“ERROR <%d> CLOSING CLASS FIND HANDLE FOR <%s.%s>“
“ERROR <%d> READING INSTANCES FOR CLASS <%s.%s.%s>“
“ERROR <%d> READING INSTANCE PREFIX FOR <%s.%s.%s.%s>“
“ERROR READING INSTANCE PREFIX FOR <%s.%s.%s.%s>, SIZE READ<%d>, EXPECTED <%d>“
“Loaded oid <%0.12s> for <%s.%s.%s.%s>“
“ERROR <%d> CLOSING INSTANCE FIND HANDLE FOR <%s.%s.%s>“
“ERROR, INVALID OBJECT ID <%0.12s> IN <%s.%s.%s.%s>“
“Database total counts do not match DMA counts of: domains <%lu>, classes <%lu>, instances <%lu>“
“ERROR, DUPLICATE OBJECT ID <%0.12s>, OCCURS <%d> TIMES”
“ERROR, DUPLICATE OBJECT ID <%0.12s> FOUND WHILE ADDING<%s.%s.%s.%s>“
“ERROR, DATABASE CONTAINS <%lu> DUPLICATE OBJECT IDS”
“Object ID cache load from the database has been disabled”
“Object ID cache structures have changed since the last checkpoint”
“Unable to add object ID <%s> to object ID cache during restartreorganization”
“Object ID cache restart reorganization in progress”
“Object ID cache cold start request in progress”
“Object ID cache restart checkpoint file <%s> was not found”
“Object ID cache restart in progress”
CM Configuration Server Messages 147
MessageNumber
NVD7452E
NVD7453E
NVD7454E
NVD7455I
NVD7456I
NVD7457W
NVD7458W
NVD7459I
NVD7460I
NVD7461I
NVD7462E
NVD7463E
NVD7464E
NVD7468E
NVD7469I
NVD7470D
NVD7471D
NVD7472D
NVD7473D
Log Message
“ERROR OPENING OBJECT ID CACHE CHECKPOINT FILE <%s>, <%s>“
“ERROR READING OBJECT ID CACHE CHECKPOINT FILE <%s>, <%s>“
“ERROR CLOSING OBJECT ID CACHE CHECKPOINT FILE <%s>, <%s>“
“Object ID cache checkpoint last DB update date/time <%8.8s> <%8.8s>, domains <%lu>, classes <%lu>, instances <%lu>“
“Object ID cache DMA ZBASE last DB update date/time <%8.8s> <%8.8s>, domains <%lu>, classes <%lu>, instances <%lu>“
“Database has been altered since last object ID cache checkpoint
“Object ID cache restart from checkpoint is not possible, object ID cache rebuild in-progress”
“Object ID cache restart completed successfully, DB last updated on <%8.8s> at <%8.8s>“
“Object ID cache checkpoint not required, DB last updated on <%8.8s> at <%8.8s>“
“Object ID cache checkpoint in progress, DB last updated on <%s> at <%s>“
“ERROR OPENING OBJECT ID CACHE CHECKPOINT FILE <%s>, <%s>“
“ERROR WRITING OBJECT ID CACHE CHECKPOINT FILE <%s>, <%s>“
“ERROR CLOSING OBJECT ID CACHE CHECKPOINT FILE <%s>, <%s>“
“OBJECT ID CACHE CHECKPOINT FAILED”
“Object ID cache checkpoint completed successfully”
“%s, rc <%d>, <%12.12s> fatal error
“%s, rc <%d>, <%12.12s> was created”
“%s, rc <%d>, <%12.12s> was not created”
“%s, rc <%d>, <%12.12s> was found”
148 Chapter 2
MessageNumber
NVD7474D
NVD7475D
NVD7476D
NVD7477D
NVD7478D
NVD7479D
NVD7480D
NVD7481D
NVD7482D
NVD7483D
NVD7484D
NVD7485D
NVD7486D
NVD7487D
NVD7488D
NVD7489W
NVD7490W
NVD7491I
NVD7492I
NVD7493I
NVD7494I
NVD7495W
NVD7496W
NVD7497W
Log Message
“%s, rc <%d>, <%12.12s> was not found”
“%s, rc <%d>, <%12.12s> was added”
“%s, rc <%d>, <%12.12s> was not added, already exists”
“%s, rc <%d>, <%12.12s> was deleted”
“%s, rc <%d>, <%12.12s> was not deleted, was not found
“%s, rc <%d>, <%12.12s> was found with commit pending”
“%s, rc <%d>, <%12.12s> was not found with commit pending”
“%s, rc <%d>, <%12.12s> was added with commit pending”
“%s, rc <%d>, <%12.12s> was not added, already exists”
“%s, rc <%d>, <%12.12s> was found with commit pending and committed”
“%s, rc <%d>, <%12.12s> was not found with commit pending, notcommitted”
“%s, rc <%d>, <%12.12s> was found with commit pending and deleted”
“%s, rc <%d>, <%12.12s> was not found with commit pending, not deleted”
“%s, rc <%d>, <%lu> entries committed for task <%X>“
“%s, rc <%d>, <%lu> entries deleted for task <%X>“
“Spare message”
“DMA control class <%s.%s.%s.%s> does not exist”
“Determining actual DB domain, class, and instance counts for file <%s>“
“Class <%s.%s.%s> contains <%lu> instances”
“Domain <%s.%s> contains <%lu> classes”
“Actual DB counts for file <%s>, Domains <%lu>, Classes <%lu>, Instances <%lu>“
“Find error <%s> while processing Instance <%s.%s.%s.%s>“
“Find error <%s> while processing Class <%s.%s.%s>“
“Find error <%s> while processing Domain <%s.%s>“
CM Configuration Server Messages 149
Log Message
NVD7498W “Total DB find errors encountered processing file <%s>, Domain errors <%lu>, Class errors <%lu>, Instance errors <%lu>“
NVD7499W “Spare message”
“Object ID Cache Statistics”
“Total size <%lu>, Prefix size <%lu>, Entry size <%lu>“
“Total entries <%lu>, Used entries <%lu>, Active handles <%lu>“
“Found <%lu>, Not found <%lu>, Adds <%lu>, Deletes <%lu>“
“Commits <%lu>, Dups <%lu>, Hashed <%lu>, Rehashs <%lu>“
“DMA Last Update Date/Time <%8.8s> <%8.8s>“
“DMA Domains <%lu>, Classes <%lu>, Instances <%lu>“
“Spare message”
“ERROR, FAILED TO DELETE OBJECT ID <%0.12s> WHILE DELETINGINSTANCE <%s.%s.%s.%s>”
“ERROR, FAILED TO READ OBJECT ID FOR CLASS <%s.%s.%s>”
“ERROR, FAILED TO DELETE OBJECT ID <%0.12s> WHILE DELETINGCLASS <%s.%s.%s>”
“ERROR, FAILED TO ADD OBJECT ID <%0.12s> WHILE ADDINGCLASS <%s.%s.%s>”
“ERROR, FAILED TO ADD OBJECT ID <%0.12s> WHILE ADDINGINSTANCE <%s.%s.%s.%s>”
7900-7999 ZVSAM
“%s%s: %s rc=%d line=%d fdci=<%s,%s,%s,%s, %d>”
“%s%s: %s rc=%d line=%d”
“%s%s: %s rc=%d line=%d dci=<%s> <%s> <%s> type=%c seq=%ld”
“%s”
“%s”
8000-8099 Errors
“ERROR STARTING METHOD <%s>“
MessageNumber
NVD7500I
NVD7501I
NVD7502I
NVD7503I
NVD7504I
NVD7505I
NVD7506I
NVD7507I
NVD7508E
NVD7509E
NVD7510E
NVD7511E
NVD7512E
NVD7900I
NVD7901I
NVD7902I
NVD7903I
NVD7904E
NVD8001E
150 Chapter 2
MessageNumber
NVD8002E
NVD8003E
NVD8004E
NVD8005E
NVD8006E
NVD8007E
NVD8008E
NVD8009E
NVD8010E
NVD8011E
NVD8012E
NVD8013E
NVD8014E
NVD8015E
NVD8016E
NVD8017E
NVD8018E
NVD8019E
NVD8020E
NVD8021E
NVD8022E
NVD8023E
NVD8024E
NVD8025E
NVD8026E
Log Message
“ERROR, INVALID PRAMETERS PASSED TO METHOD <%s>“
“ERROR, METHOD <%s> FAILED”
“ERROR, UNABLE TO GET TRACE FLAGS”
“MISSING PROGRAM NAME”
“MISSING PROGRAM TYPE”
“MISSING PROGRAM PARMS”
“PROMOTE FAILED, FLUSHING COMMUNICATIONS BUFFER”
“CM CONFIGURATION SERVER METHOD FAILURE PGM: <%s> RC: <%d>, MAX RC ALLOWED <%d>“
“METHOD <%s> SET OBJECT RESOLUTION ABORT CODE”
“METHOD <%s> SET OBJECT RESOLUTION STOP CODE”
“ERROR RECV. ACK FROM METHOD”
“REXX METHOD <%s> TIMEOUT DUE TO STORAGE SHORTAGE”
“REXX METHOD <%s>: ERR EXIT ENQ FAILURE RC <%d>“
“ERROR LOADING THE REXX INTERPRETER...RC IS <%d>“
“REXX INTERPRETER ERROR...RC IS <%d>“
“SUBCOM REGISTRATION FOR EDMLINK FAILED RC=<%d>“
“EXIT REGISTRATION FOR EDMSAY FAILED RC=<%d>“
“EDMLINK HOST CMD ENV SETUP FAILED”
“REXX ENVIROMENT SET UP COMPLETED WITH ERRORS <%d>“
“FUNCTION DEREG FOR <%s> FAILED RC=<%d>“
“FUNCTION DEREG FOR EDMLINK FAILED RC=<%d>“
“EXIT DEREG FOR EDMSAY FAILED RC=<%d>“
“REXX HOST CMD ENV CLEANUP COMPLETED WITH ERRORS <%d>“
“INCORRECT #args FOR EDMRESO. USE: EDMRESO (RESOLVESTRING)”
“ARGUMENT RESOLVE STRING HAS INVALID LENGTH...: <%d>“
CM Configuration Server Messages 151
MessageNumber
NVD8027E
NVD8028E
NVD8029E
NVD8030E
NVD8031E
NVD8032E
NVD8033E
NVD8034E
NVD8035E
NVD8036E
NVD8037E
NVD8038E
NVD8039E
NVD8040E
NVD8041E
NVD8042E
NVD8043E
NVD8044E
NVD8045E
NVD8046E
Log Message
“INCORRECT #args TO EDMGETV. USE: EDMGETV(object,variable,heapnumber,resolveflag)”
“ARGUMENT OBJECT NAME HAS INVALID LENGTH: <%d>“
“ARGUMENT VARIABLE NAME HAS INVALID LENGTH: <%d>“
“ARGUMENT OBJECT HEAP HAS INVALID LENGTH: <%d>“
“ARGUMENT RESOLVEFLAG HAS INVALID LENGTH: <%d>“
“VARIABLE <%s> WHICH IS <%d> LONG CANNOT BE STORED IN REXX”
“INVALID LENGTH FOR ZOBJID <%d>“
“ERROR IN REXX_SET: RC=<%d> SHVRET=<%d> NAME=<%s>VALUE=<%s>“
“INCORRECT #args TO EDMSETV. USE: EDMSETV(object,variable,value,heapnumber)”
“ARGUMENT VARIABLE VALUE HAS INVALID LENGTH: <%d>“
“INCORRECT #args TO EDMSET. USE: EDMSET (object,heapnumber)”
“ERROR IN REXX_GETNEXT: SHVRET=<%d> NAME=<%.*s>VALUE=<%.*s>“
“ERROR REXX_RESET: RC=<%d> SHVRET=<%d> NAME=<%s>VALUE=<%s>“
“%s: OSDYNALLOC FAILED, RETURN CODE <%ld>, REASON CODE<%08X>“
“%s: REXX METHOD: ERR EXIT ENQ FAILURE RC <%d>“
“INTERNAL ERROR - UNKNOWN TYPE <%d> IN ZCVT ACCESS TABLEFOR <%s>“
“INTERNAL ERROR - UNKNOWN TYPE <%d> IN ZTCBG ACCESSTABLE FOR <%s>“
“COULD NOT RESET SESSION TIMEOUT ATTRIBUTE <%s> INVALID”
“FUNCTION REGISTRATION FOR <%s> FAILED RC <%d>“
“%s: OSDYNALLOC FAILURE, PARM STRING PASSED IN WAS <%s>“
152 Chapter 2
MessageNumber
NVD8047I
NVD8048I
NVD8049I
NVD8050I
NVD8051D
NVD8052I
NVD8053W
NVD8054E
NVD8055E
NVD8056I
NVD8057I
NVD8058E
NVD8059I
NVD8060E
NVD8061I
NVD8062I
NVD8063E
NVD8064W
NVD8065E
NVD8066I
NVD8067E
NVD8068I
NVD8069E
NVD8070E
NVD8071I
Log Message
“ZEDMLINK passed a blank command string <%s>“
“Invalid number of arguments passed to ZSIMRESO”
“usage: EDMLINK('ZSIMRESOFILE,DOMAIN,CLASS,INSTANCE,MESSAGE')”
“EDMLINK Error in varput of ZMTHPRMS”
“TCL: %s”
“TCL: %s”
“TCL: %s”
“TCL: %s”
“TCL: %s”
“TCL cmd <%s> arg#%d(%-8.8s): <%s>”
“TCL cmd <%s> arg#%d: <%s>”
“TCL CMD <%s> ERROR RESULT: <%s>”
“TCL cmd <%s> result: <%s>”
“UNABLE TO FIND REQUESTED TCL METHOD <%s>”
“TCL method <%s> executing from the <%s> directory”
“TCL method completed, rc=%ld”
“TCL INTERPRETER NOT CREATED”
“init.tcl not found”
“TCL METHOD <%s> RETURNED NON-NUMERIC RESULT <%s>”
“TCL method <%s> returned rc=%d”
“TCL METHOD <%s> FAILED: RESULT=<%s>, TRACEBACKFOLLOWS:”
“instg verb=%s”
“%s”
“TCL CMD: %s”
“heap# %d will be implicitly added to obj %s”
CM Configuration Server Messages 153
Log Message
“using current heap# %d of obj %s”
“current heap# set =%d of obj %s”
“heap# %d explicitly added to obj %s”
“getvar(nosub) %s.%s = <%s>”
“getvar(sub) %s.%s = <%s>”
“EDMLINK rc=%d”
“TCL tracing disabled”
“resolution rc=%d”
“setvar %s.%s = <%s>”
“TCL cmd <%s>: NO args”
“COULD NOT FIND %s.%s”
“INTERNAL ERROR - UNKNOWN TYPE <%d> IN %s ACCESS TABLE FOR <%s>”
“Value of %s.<%s> is <%s>”
“REXX EXPR: <%s>”
“TCL EXPR: <%s>”
“TCL EVAL: <%s>”
“RULE %d: <%s>”
“TCL cmd <%s> result: <%d>”
“TCL regexp compilation failed”
8100-8199 Informational
“ZMTHSVR Object: <%s>“
“ZMTHSVR Program: <%s>“
“ZMTHSVR Program: <%s>, TYPE: <%s>“
“ZMTHSVR C Method Completed RC: <%d>“
“CM Configuration Server Method RC Reset for Pgm: <%s> RC: <%d>, Max RC Allowed <%d>“
MessageNumber
NVD8072I
NVD8073I
NVD8074I
NVD8075I
NVD8076I
NVD8077I
NVD8078I
NVD8079I
NVD8080I
NVD8081I
NVD8082E
NVD8083E
NVD8084I
NVD8085I
NVD8086I
NVD8087I
NVD8088I
NVD8089I
NVD8090I
NVD8101I
NVD8102I
NVD8103I
NVD8104I
NVD8105I
154 Chapter 2
MessageNumber
NVD8106I
NVD8107W
NVD8108I
NVD8109I
NVD8110I
NVD8111I
NVD8112I
NVD8113W
NVD8114W
NVD8115I
NVD8116I
NVD8117I
NVD8118I
NVD8119I
NVD8120I
NVD8121W
NVD8122A
NVD8123I
NVD8124I
NVD8125I
NVD8126I
NVD8127W
NVD8128I
Log Message
“Ignoring CM Configuration Server Method Return Code Pgm: <%s> RC: <%d>“
“Unable to find requested REXX method <%s>“
“start_rexx zsrc <%ld>“
“REXX Method completed, rc = <%ld>“
“Method Completed, rc = <%d>“
“Remote METHOD field <%s>“
“Dormant METHOD field <%s>“
“REXX Method <%s> delayed due to storage shortage”
“REXX Method <%s> with parms <%s> not executed, MGR_TRACEREXXOFF = YES”
“REXX Method <%s> with parms <%s> started at <%2.2d:%2.2d:%2.2d:%3.3d>“
“%s: REXX Method <%s> doing Rexx Environment Ownership Check”
“%s: REXX Method <%s>: RC of <%d>, ENQ for ZICB in use, using LocalZICB”
“About to execute RexxStart()....”
“REXX Method <%s> ended at <%2.2d:%2.2d:%2.2d:%3.3d>, rc<%d>“
“REXX Version number is <%s>“
“Setup of REXX dll failed, rc = <%d> - ok if not running REXX as a dll”
“REXX search environment variable <%s>“
“REXX Environment set up completed successfully”
“Cmd Environment EDMLINK could not be deleted”
“REXX host cmd env cleanup completed successfully”
“%s”
“Limit of <%i> LOG LINES reached for the REXX METHOD, No more messages will be allowed”
“Resolution string passed = <%s>“
CM Configuration Server Messages 155
MessageNumber
NVD8129I
NVD8130I
NVD8131I
NVD8132I
NVD8133I
NVD8134I
NVD8135W
NVD8136I
NVD8137I
NVD8138I
NVD8139I
NVD8140I
NVD8141I
NVD8142W
NVD8143I
NVD8144I
NVD8145I
NVD8146I
NVD8147I
NVD8148I
NVD8149I
NVD8150I
NVD8151I
NVD8152I
NVD8153I
NVD8154I
Log Message
“Object Name passed = <%s>“
“Variable Name passed = <%s>“
“Heap number was not specified, current assumed”
“Heap number passed = <%d>“
“Resolve flag was not specified, no substitution assumed”
“Resolve flag passed <%s>“
“Variable <%8.8s> not found in <%8.8s>“
“Object <%8.8s> was not found”
“Object name will be...: <%s>“
“Variable <%s> is <%d> long and is at offset <%d>“
“Returning <%s>“
“ZOBJPID Variable Not found in <%8.8s>“
“Object not found - <%s>“
“Skipping Variable <%s> which is (%d) long cannot be stored in REXX”
“Variable Value passed = <%s>“
“%s: Variable will be updated..: <%.8s> length=<%d> Data=<%.*s>”
“Incorrect call to EDMLINK. Use: EDMLINK (command)”
“EDMLINK <%s>“
“Incorrect call to EDMMALLO. Use: EDMMALLO (parms)”
“Incorrect call to EDMMALLO. No \”DSN=\” in parms”
“%s: Parms <%s>“
“%s: osdynalloc parms <%s>“
“ddname <%s> assigned”
“Incorrect call to EDMMDALO. Use: EDMMDALO (DDN=ddname)”
“%s: <%s> freed”
“%s: REXX Method doing REXX Environment Ownership Check”
156 Chapter 2
Log Message
NVD8155I “%s: REXX Method: RC of <%d> ENQ for ZICB in use, using local ZICB”
NVD8156W “%s: Truncation in REXX_GETNEXT: SHVRET=<%d> NAME=<%.*s>VALUE=<%.*s>“
“%s: Attribute name <%.*s>, length <%d>, is greater than max allowed<%d>, attribute cannot be set”
“REXX Expression <%s> started at <%2.2d:%2.2d:%2.2d:%3.3d>“
“REXX Expression <%s> completed at <%2.2d:%2.2d:%2.2d:%3.3d>“
“Request to set Soft Task Limit to <%d>“
“Reset Soft Task Limit to <%d>“
“Could not find ZCVT variable of <%s>“
“Value of ZCVT.<%s> is <%s>“
“Attempting to get unknown ZTCBG variable of <%s>“
“Set Ignore Expression Flag ON!”
“Set Ignore Expression Flag OFF!”
“Attempting to set unknown ZTCBG variable of <%s>“
“Value of ZTCBG.<%s> is <%s>“
“Unable to reset timeout, CliBlk unavailable”
“Could not reset Session Timeout to <%d> seconds”
“Session Timeout reset to <%d> seconds”
“ZOBJID Value = <%s>“
“REXX search environment variable value <%s>“
“%s: irxctl(IRXCTL_NOBREAK) failed, me, rc <%d>“
“REXX Method <%s> executing from the <%s> directory”
“Secondary method <%s> causes OCB rename of primary method <%s>“
“%s: ERROR SETTING <%8.8s> IN <%s>”
8200-8299 Expressions
“ERROR <%d> IN REXX EXPRESSION <%s>“
MessageNumber
NVD8157W
NVD8158I
NVD8159I
NVD8160W
NVD8161W
NVD8162W
NVD8163W
NVD8164W
NVD8165E
NVD8166E
NVD8167W
NVD8168W
NVD8169W
NVD8170W
NVD8171I
NVD8172I
NVD8173A
NVD8174W
NVD8175I
NVD8176I
NVD8177E
NVD8201E
CM Configuration Server Messages 157
Log Message
“REXX EXPRESSION ERROR IN <%s.%s.%s.%s>“
“Expression <%s> Len <%d>“
“Result <%s> Len <%d>“
“Verify expression started:”
“ERROR IN EXPRESSION: <%s>“
“Check expression values started:”
“Expression setting resolution <%s> code”
“Expression message <%s>“
“Expression restype <%s>“
“Expression changing message from <%s> to <%s>“
8300-8399 ZNFY
“PARMS VALUE MISSING OR INCORRECT”
“LU6.2 Notify Manager name is <%s>“
“ACBNAME MISSING, NONE PROVIDED OR DEFAULTED, UNABLETO CONTINUE”
“ZNFY6MGR <%s> ENDING DUE TO ERRORS”
“%s Diagnostic address: APICB = %08x, APOCB = %08x, DESTBLK = %08x”
“%s Diagnostic address: Notify ACB = %08x”
“%s: MESSAGE QUEUE WAS NOT INITIALIZED, UNABLE TOCONTINUE”
“ZNFYTMGR <%s> ENDING DUE TO ERRORS”
“%s: ERROR DURING OPEN, RC = <%d>“
“ZNFYTMGR <%s> ending”
“%s: Before call to msgrcv”
“%s: After call to msgrcv”
“%s: Shutdown request received”
MessageNumber
NVD8202E
NVD8203I
NVD8204I
NVD8205I
NVD8206E
NVD8207I
NVD8208I
NVD8209I
NVD8210I
NVD8211I
NVD8301E
NVD8302I
NVD8303E
NVD8304E
NVD8305I
NVD8306I
NVD8307E
NVD8308E
NVD8309E
NVD8310I
NVD8311E
NVD8312I
NVD8313I
158 Chapter 2
MessageNumber
NVD8314E
NVD8315I
NVD8316I
NVD8317I
NVD8318E
NVD8319I
NVD8320I
NVD8321E
NVD8322W
NVD8323W
NVD8324I
NVD8325I
NVD8326E
NVD8327E
NVD8328E
NVD8329I
NVD8330E
NVD8331E
NVD8332E
NVD8333I
NVD8334I
NVD8335I
NVD8336I
NVD8337I
NVD8338I
Log Message
“%s: UNABLE TO RECEIVE MSG, BECAUSE OF INTERNAL ERROR”
“ZNFY6MGR <%s> ending”
“Signal received: <%d>. PID is <%d>“
“%s has entered Notify request processing”
“%s: ACB NOT INITIALIZED PROPERLY. REQUEST IS IGNORED”
“%s: Request was removed or skipped by start method”
“%s is now exiting Notify request processing”
“%s: NO LUNAME SUPPLIED, UNABLE TO PROCESS NOTIFY REQUEST”
“%s: No TPNAME supplied using default of <%s>“
“%s: No LOGMODE supplied using default of <%s>“
“%s: Calling parms: Luname=<%s> Logmode=<%s> Tpname=<%s>Acbname=<%s>“
“%s: Calling parms: Luname=<%s> Logmode=<%s> Tpname=<%s>“
“%s: ALLOCATION ERROR FOR <%s - %s>“
“%s: ERROR SETTING TP NAME FOR <%s - %s>“
“%s: ERROR SETTING PLU NAME FOR <%s> - <%s>“
“%s: LU6.2 Notify now in progress for <%s>“
“%s: ERROR SETTING MODE NAME FOR <%s - %s>“
“%s: CONNECTION ERROR FOR <%s - %s>“
“%s: CONNECTION OPEN ERROR FOR <%s - %s>“
“%s: Entering ZNFY6STA processing”
“%s: Entering ZNFY6END processing”
“%s: On Entry-> RC = <%d>, ntfyrnum = <%d>, ntfyrmax = <%d>“
“%s: Exiting ZNFY6END processing”
“%s: Entering open notify ACB process”
“%s: Exiting open notify ACB process”
CM Configuration Server Messages 159
MessageNumber
NVD8339E
NVD8340I
NVD8341E
NVD8342I
NVD8343I
NVD8344I
NVD8345I
NVD8346E
NVD8347I
NVD8348I
NVD8349I
NVD8350E
NVD8351I
NVD8352I
NVD8353E
NVD8354E
NVD8355E
NVD8356E
NVD8357E
NVD8358I
NVD8359E
NVD8360E
NVD8361I
Log Message
“%s: APISTARTLOGON ERROR - <%s>“
“%s: Entering close notify ACB process”
“%s: CLOSE ACB (DISCONNECT) ERROR FOR <%s - %s>“
“%s: Exiting close notify ACB process”
“%s: Entering notify comm cleanup process”
“%s: Exiting notify comm cleanup process”
“%s: Entering read notify response process”
“LU6.2 NOTIFY MANAGER <%s>, RECEIVE ERROR OCCURRED FOR<%s>, RC = <%d>“
“%s: Exiting read notify response process”
“LU6.2 Notify Manager <%s>, has successfully notified <%s> CM Agent”
“TCP Notify Manager <%s> started “
“MESSAGE QUEUE WAS NOT INITIALIZED, UNABLE TO CONTINUE”
“Signal received: <%d>. PID is <%d>“
“Port for REXEC not defined, default <%i> will be used”
“ALLOCATION ERROR <%s> FOR <%s>“
“CHECK IP ADDRESS AND PORT NUMBER -- <%s>: FOR <%s>“
“EDMWAKE is issued to power up the destination machine, will retry notifyin <%i> seconds”
“SEND ERROR <%s> FOR <%s>“
“RECEIVE ERROR <%s> FOR <%s>“
“Successfully notified <%s>“
“NOTIFY AUTHORIZATION FAILED ON DESTINATION, CHECK USER ID <%s>“
“ERROR OBTAINING IPADDR FOR WAKE_ON_LAN CALL -- <%s> FOR <%s>“
“Issuing WAKE_ON_LAN call for IP@ = <%s>, MAC_addr = <%s> on Subnet = <%s>“
160 Chapter 2
Log Message
NVD8362I “DialUp Notify Manager Name is <%s>“
NVD8363I “Request: address=<%s:%s> socket=<%s> uid=<%s> password=<%s> \n cmd=<%s>“
“SENDRAW ERROR - <%s>“
“RECVRAW ERROR - <%s>“
“Simulating send”
“Streaming mode send”
“Non-streaming mode send”
“INVALID PORT <%s> SPECIFIED”
8400-8449 ZMETHOD
“CANNOT RUN MORE THAN ONE METHOD AT A TIME”
“CURRENTLY EXECUTING METHOD WITH PID<%08X>“
“CURRENTLY EXECUTING METHOD WITH PID<%ld>“
“Params: <%s>“
“<%s> with parameters <%s> started <%s> at <%2.2d:%2.2d:%2.2d:%3.3d>“
“Executing <%s> directly as a DLL”
“Executing method <%s>“
“METHOD <%s> PID=<%ld>, TERMINATED ABNORMALLY”
“METHOD <%s> PID=<%ld>, TIMED OUT”
“METHOD <%s> , TIMED OUT PID=<%08X>“
“METHOD <%s> , TIMED OUT PID=<%ld>“
“METHOD <%s> , EXECUTION ERROR PID =<%08X>, rc = <%d>“
“METHOD <%s> , EXECUTION ERROR PID =<%ld>, rc = <%d>“
“%s completed at <%2.2d:%2.2d:%2.2d:%3.3d>, duration <%1.3f> seconds”
“%s with Task ID <%08X> completed with RC=<%d> at<%2.2d:%2.2d:%2.2d:%3.3d>, duration <%1.3f> seconds”
MessageNumber
NVD8365E
NVD8366E
NVD8367I
NVD8368I
NVD8369I
NVD8370E
NVD8401E
NVD8402E
NVD8403E
NVD8404I
NVD8405I
NVD8406I
NVD8407I
NVD8408E
NVD8409E
NVD8410E
NVD8411E
NVD8412E
NVD8413E
NVD8414I
NVD8415I
CM Configuration Server Messages 161
Log Message
NVD8416I “%s with Task ID <%ld> completed with RC=<%d> at <%2.2d:%2.2d:%2.2d:%3.3d>, duration <%1.3f> seconds”
NVD8417I “Method <%s> ended, exit status <%d>“
“ERROR DISCONNECTING FROM NAMED PIPE”
“<%s> USERID <%s> validated”
“<%s> validating USERID <%s> “
“Unable to find requested method <%s> “
“ERROR ATTACHING METHOD <%s>“
“ERROR LOADING METHOD DLL <%s>“
“ZERRORM component - <%s>“
“ZERRORM description - <%s>“
“ZERRORM - <%s>“
“Request: r_name=<%s> r_parms=<%s>“
“Request: r_name=<%s> executed rc=<%i>“
“Old method <%s> is requested, new method <%s> will be called.”
8450-8499 ZRTRYMGR
“Unable to read instance <%s.%s.%s.%s>, RC = <%d>“
“Will retry reading instance later”
“NOTIFY TYPE NOT SPECIFIED FOR <%s>.<%s>.<%s>.<%s> WILL BE DELETED”
“RETRY ERROR FOR <%s>.<%s>.<%s>.<%s> REMOVED FROM RETRYQUEUE”
“WRONG NOTIFY TYPE <%c> SPECIFIED FOR <%s>.<%s>.<%s>.<%s>WILL BE DELETED”
“Instance will be ignored”
“<%d> notification requests were re-scheduled”
“No notification requests were re-scheduled”
MessageNumber
NVD8418E
NVD8419I
NVD8420I
NVD8421I
NVD8422E
NVD8423E
NVD8424I
NVD8425I
NVD8426I
NVD8427I
NVD8428I
NVD8429I
NVD8450W
NVD8451W
NVD8452E
NVD8453E
NVD8454E
NVD8455W
NVD8456I
NVD8457I
162 Chapter 2
Log Message
9000-9100 Multicast
“Multicasting File <%s> Size <%d> Priority <%d> Hits <%d>“
“Multicasting Instance <%s> : <%ld> Files in <%ld> packets”
“ERROR COLLECTING FILES TO BE MULTICASTED”
“ERROR GETTING MULTICAST INFORMATION”
“ERROR INITIALIZING MULTICAST SEGMENT”
“End of multicast for instance <%s> rc <%d>“
“Error multicasting files for instance <%s>“
“Multicaster Task has started”
“Initializing Multicast IPCs”
“Fetching the Multicast info for the current session”
“Starting collection process for Multicast Instance <%s>“
“End of collection process for Multicast Instance <%s>“
“Number of files to be multicasted <%d>“
“UNABLE TO GET INFORMATION ABOUT LIST FILE <%s>“
“MULTICAST LIST FILE <%s> IS EMPTY”
“INVALID FILE COUNT <%d> EXPECTED <%d>“
“ERROR LOADING MULTICAST PARAMETERS FOR INSTANCE <%s>“
“ERROR INITIALIZING MULTICAST SESSION RC <%d> MESG <%s>“
“ERROR SENDING MULTICAST SESSION INFO RC <%d> MESG <%s>“
“ERROR OPENING MULTICAST LIST FILE <%s>“
“Start Multicasting Instance <%s> Files <%d> Address <%s> Port <%d>“
“ERROR SENDING FILE <%s> RC <%d> MESG <%s>“
“End Multicasting for instance <%s> rc <%d> Address <%s> Port <%d>“
“INVALID ADDRESS FOR MULTICAST <%s>“
“MISSING MULTICAST/BROADCAST ADDRESS IN INSTANCE <%s>“
MessageNumber
NVD9000I
NVD9001I
NVD9002E
NVD9003E
NVD9004E
NVD9005I
NVD9006I
NVD9007I
NVD9008I
NVD9009I
NVD9010I
NVD9011I
NVD9012I
NVD9013E
NVD9014E
NVD9015E
NVD9016E
NVD9017E
NVD9018E
NVD9019E
NVD9020I
NVD9021E
NVD9022I
NVD9023E
NVD9024E
CM Configuration Server Messages 163
Log Message
“ERROR CREATING MULTICAST SHARED MEMORY”
“ERROR ATTACHING MULTICAST SHARED MEMORY”
“ERROR ALLOCATING STORAGE FOR MULTICAST INFO”
“ERROR CREATING MUTEX SEMAPHORE FOR MULTICASTING”
“ERROR OPENING MULTICAST SEMAPHORE”
“ERROR LOCKING MUTEX SEMAPHORE”
“ERROR CREATING EVENT SEMAPHORE FOR MULTICASTING”
“No more slots available for multicasting”
“ERROR OPENING MUTEX SEMAPHORE”
“ERROR OPENING EVENT SEMAPHORE”
“ERROR LOCKING MUTEX SEMAPHORE FOR MULTICASTING”
“ERROR UNLOCKING MUTEX SEMAPHORE FOR MULTICASTING”
“ERROR SETTING EVENT SEMAPHORE FOR MULTICASTING”
“ERROR RESETTING EVENT SEMAPHORE FOR MULTICASTING”
9101-9149 General
“Converting ISO date to YY/MM/DD format for <%8.8s>.<%8.8s> <%.*s>“
“ERROR CONVERTING ISO DATE TO YY/MM/DD FORMAT FOR<%8.8s>.<%8.8s> <%.*s>“
“Converting Old Date to ISO for <%8.8s>.<%8.8s> <%.*s>“
“ERROR CONVERTING OLD DATE TO ISO FOR <%8.8s>.<%8.8s> <%.*s>“
“Translating template from network to host format”
“Translating heap from network to host format”
“Translating template from host to network format”
“Translation of template from host to network format complete”
“Translating heap from host to network format”
“Translating heap from host to network format using template”
MessageNumber
NVD9025E
NVD9026E
NVD9027E
NVD9028E
NVD9029E
NVD9030E
NVD9031E
NVD9032W
NVD9033E
NVD9034E
NVD9035E
NVD9036E
NVD9037E
NVD9038E
NVD9101I
NVD9102E
NVD9103I
NVD9104E
NVD9105I
NVD9106I
NVD9107I
NVD9108I
NVD9109I
NVD9110I
164 Chapter 2
MessageNumber
NVD9111I
NVD9112I
NVD9113I
NVD9114I
NVD9115I
NVD9116E
NVD9117E
NVD9118E
NVD9119E
NVD9120I
NVD9121I
NVD9122E
NVD9123E
NVD9124E
NVD9125E
NVD9126I
NVD9127I
NVD9128I
NVD9129I
NVD9130I
NVD9131I
NVD9132I
NVD9133I
NVD9134I
NVD9135I
Log Message
“Translation of heap from host to network format complete”
“Use ZEDMAMS to update the database”
“=============================================“
“=============================================“
“=============================================“
“****************************************************************”
“* %s *”
“ERROR ADDING UP %8.8s”
“FLAG ERROR ADDING UP %8.8s”
“Profile Section(%s)”
“%-26.25s ==> %s”
“* DATABASE ERROR *”
“INVALID TRACE VAR: <%s>“
“INVALID OPTION FOR ADD”
“WRONG SECTION NAME: <%s>“
“Section Name <%s> was not found in PROFILE”
“%-27s==> Parameter not found in section <%s> and was not set”
“%-27s==> Parameter not found in section <%s>. Set to default <%s>“
“Initially set parameter <%s> in section <%s> to <%s>“
“%-27s==> Parameter not found in section <%s>. Set to default <%s>“
“%-27s==> Parameter in section <%s> was set to <%s>“
“Settings in read_TRACE: set ALL trace flags to YES in section <%s>“
“%-27s==> Parameter not found in section <%s>. Set to default <%ld>“
“%-27s==> Parameter not found in section <%s>. Set to default <%d>“
“Settings in read_MSG_CONTROL: line #%i read: ==>%s<==“
CM Configuration Server Messages 165
Log Message
“Settings in read_MSG_CONTROL: set ALL trace flags to YES in section<%s>“
“Settings in read_TRANSLATION: line #%i read: ==>%s<==“
“Section (%s): Following default or overwritten values have been assigned”
“%s *%.*s*”
9150-9299 ZSYSINFO
“Adjust on exit semaphore maximum value (SEMAEM) = <max_value>.”
“Maximum memory allowed in buffer cache (bufhvm) = <max_value>.”
“Maximum number of processes (v.v_proc) = <max_value>.”
“Maximum global priority in sys class (MACLSYSPRI) = <max_value>.”
“Maximum processes per user id (v.v_maxup) = <max_value>.”
“Auto update time limit in seconds (NAUTOUP) = <limits>.”
“Page stealing low water mark (GPGSLO) = <page_value>.”
“FSflush run rate (FSFLUSHR) = <flash_rate_value>.”
“Minimum resident memory for avoiding deadlock (MINARMEM) = <%ld>.”
“Minimum swappable memory for avoiding deadlock (MINASMEM) = <%ld>.”
“System<%s> Version %.2s Release %.2s.%.2s”
“Number of current processes is <%lu>”
“Total usable main memory size is <%llu>”
“Available memory size is <%llu>”
“Total swap space size is <%llu>”
“Swap space still available is <%llu>”
“CM Configuration Server Information Section”
“CM Configuration Server is Version <%1d.%2.2d.%3.3d%s> Build <%d %s> Service Pack <%s>”
“CM Configuration Server is Portable”
MessageNumber
NVD9136I
NVD9137I
NVD9138I
NVD9139I
NVD9150I
NVD9151I
NVD9152I
NVD9153I
NVD9154I
NVD9155I
NVD9156I
NVD9157I
NVD9158I
NVD9159I
NVD9160I
NVD9161I
NVD9162I
NVD9163I
NVD9164I
NVD9165I
NVD9200I
NVD9201I
NVD9202I
166 Chapter 2
MessageNumber
NVD9203I
NVD9204I
NVD9205I
NVD9206I
NVD9207I
NVD9208W
NVD9209I
NVD9210I
NVD9211I
NVD9212I
NVD9213I
NVD9214I
NVD9215I
NVD9216I
NVD9219I
NVD9220I
NVD9221I
NVD9222I
NVD9223I
NVD9224I
NVD9225I
NVD9226I
NVD9227I
NVD9228I
Log Message
“CM Configuration Server Build is CPU Specific”
“CM Configuration Server built on <%s>“
“System Information Section”
“Error Getting Windows Foreground Priority Boost Information [open];rc=<%ld>“
“Windows Foreground Priority Boost is <%ld>“
“Warning, Windows Foreground Priority Boost should be set to 0”
“Error Getting Windows Foreground Priority Boost Information [query];rc=<%ld>“
“Error Getting Windows Foreground Priority Boost Information [close];rc=<%ld>“
“Error Getting OS/2 System Information; rc=<%ld>“
“OS/2 Time Slice Minimum=<%ld> Maximum=<%ld> milliseconds”
“OS/2 Maximum Wait is <%ld> seconds”
“OS/2 Priority is <%s>“
“Error Getting Version Information”
“Windows %s %s Version <%ld.%ld>; Build Number <%d>; CSD <%s>“
“Windows 3.1 Build Number <%d>; CSD <%s>“
“System <%s> Version %02X Release %02X.%02X”
“Environment <%s> Version %02X Release %02X.%02X”
“OS/2 Version <%s>“
“Error Getting Version Information; rc=<%d-%s>“
“System <%s> Version <%s> Release <%s>“
“Error Getting POSIX.1 Version Information; rc=<%d-%s>“
“Error Getting POSIX.2 Version Information; rc=<%d-%s>“
“Error Getting X/Open Version Information; rc=<%d-%s>“
“Error Getting AES/OSF Version Information; rc=<%d-%s>“
CM Configuration Server Messages 167
MessageNumber
NVD9229I
NVD9230I
NVD9231I
NVD9232I
NVD9233I
NVD9234I
NVD9235I
NVD9236I
NVD9237I
NVD9238I
NVD9239I
NVD9240I
NVD9241I
NVD9242I
NVD9243I
NVD9244I
NVD9245I
NVD9246I
NVD9247W
NVD9248I
NVD9249I
NVD9250I
NVD9251I
NVD9252I
NVD9253I
Log Message
“Versions: POSIX.1=<%ld> POSIX.2=<%ld> X/Open=<%ld> OSF/AES=<%ld>“
“There are <%d> Processors of type <%s>“
“There is 1 Processor of type <%s>“
“Error Getting Hardware Provider; rc=<%d-%s>“
“Error Getting Hardware Serial Number; rc=<%d-%s>“
“Error Getting Architecture Information; rc=<%d-%s>“
“Error Getting Platform Information; rc=<%d-%s>“
“Error Getting Number of Processors Configured; rc=<%d-%s>“
“Error Getting Number of Processors Online; rc=<%d-%s>“
“Hardware Manufacturer <%s>; Serial Number <%s>“
“There are <%ld> Configured Processors of which <%ld> are Online”
“Processor Architecture is <%s> and Platform is <%s>“
“Error Getting sysinfo; rc=<%d-%s>“
“Error Getting CPU Version; rc=<%d-%s>“
“Processor Architecture is <%s>“
“Physical Memory: Total=<%llu> Available=<%llu>“
“System Virtual Memory: Total=<%llu> Available=<%llu> PageSize=<%llu>“
“Process Virtual Memory: Total=<%llu> Available=<%llu>“
“Warning, Windows Virtual Memory should minimally be 100MB”
“Error Getting Memory Information”
“Physical Memory: Total=<%llu> Resident=<%llu>“
“Virtual Memory: Total=<%llu> Page Size=<%llu>“
“Shared Memory: Total=<%llu>“
“Process Memory: Total=<%llu>“
“Error Getting System Memory Page Size; rc=<%d-%s>“
168 Chapter 2
MessageNumber
NVD9254I
NVD9255I
NVD9256I
NVD9257I
NVD9258I
NVD9259I
NVD9260I
NVD9261I
NVD9262I
NVD9263I
NVD9264I
NVD9265I
NVD9266I
NVD9267I
NVD9268I
NVD9269I
NVD9270I
NVD9271I
NVD9272I
NVD9273I
NVD9274I
NVD9275I
NVD9276I
NVD9277I
NVD9278I
Log Message
“Error Getting Total Physical Pages; rc=<%d-%s>“
“Error Getting Unused Physical Pages; rc=<%d-%s>“
“Physical Memory: Total=<%llu> KB Available=<%llu> KB PageSize=<%llu> bytes”
“Error Getting System Memory Page Size; rc=<%d-%s>“
“Memory: Page Size=<%llu>“
“Running on Domain <%s> Computer <%s> as User <%s>“
“Error Getting Machine Information; rc=<%d-%s>“
“Running on Machine <%s> Hostname <%s> as User <%s>“
“Error <%ld> getting System Directory”
“System Directory is <%s>“
“Error <%ld> getting Windows Directory”
“Windows Directory is <%s>“
“Error <%d> getting volume information for drive <%s>“
“CM Configuration Server Database is on <%s> <%s> <%s> Drive <%c>“
“Drive <%c> supports <%d> character file names”
“Drive <%c> supports <%s>“
“Disk Size Information for Database Directory <%s> not available”
“Database resides in <%s>“
“Database Disk Space Total=<%.0f> Available=<%.0f>“
“Error getting Disk Size Information for Database Directory <%s>“
“Disk Size Information for Log Directory <%s> not available”
“Log will be created in <%s>“
“Log Disk Space Total=<%.0f> Available=<%.0f>“
“Error getting Disk Size Information for Log Directory <%s>“
“Logging CM Configuration Server module versions”
CM Configuration Server Messages 169
Log Message
“Logging CM Configuration Server DLL versions”
“Logging Method versions”
“Logging Utility module versions”
“Warning, The volume containing the CM Configuration Server Databasehas only %.0lf free bytes”
“Warning, The volume containing the CM Configuration Server log has only%.0lf free bytes”
“System swap file <%s>, total pages <%lu>, available <%lu>“
“System swap file <%s>, total pages <%lu>, available <%lu>“
“OS seems to be capable of supporting 3GB processing space, but is not configured to exploit additional address space.”
“Error Getting IPC Information: rc=<%d-%s>”
“Maximum shared memory segment size (SHMMAX) = <%ld>.”
“Minimum shared memory segment size (SHMMIN) = <%ld>.”
“Total shared memory identifiers (SHMMNI) = <%ld>.”
“Maximum attached shared memory segments per process (SHMSEG) = <%ld>.”
“Entries in semaphore map (SEMMAP) = <%ld>.”
“Number of semaphore-identifiers in system (SEMMNI) = <%ld>.”
“Total number of semaphores in system (SEMMNS) = <%ld>.”
“Undo structures in system (SEMMNU) = <%ld>.”
“Maximum semaphores per ID (SEMMSL) = <%ld>.”
“Maximum # of operations per semop () call(SEMOPM) = <%ld>.”
“Maximum undo entries per process (SEMUME) = <%ld>.”
“Semaphore maximum value (SEMVMX) = <%ld>.”
9300-9399 TASKLIM
“Task context and intent limit statistics - %s”
MessageNumber
NVD9279I
NVD9280I
NVD9281I
NVD9282W
NVD9283W
NVD9284I
NVD9285I
NVD9286W
NVD9287I
NVD9288I
NVD9289I
NVD9290I
NVD9291I
NVD9292I
NVD9293I
NVD9294I
NVD9295I
NVD9296I
NVD9297I
NVD9298I
NVD9299I
NVD9300I
170 Chapter 2
Log Message
“%-20.20s %5.5s %5.5s %5.5s %5.5s %10.10s %10.10s”
“%-20.20s %5.1d %5.1d %5.1d %5.1d %10.1lu %10.1lu”
“”
“Task context and intent limit maximum for <%s> <%s> reset from <%0.1d> to <%0.1d>“
“Task context and intent limit priority for <%s> <%s> reset from <%0.1d> to <%0.1d>“
“”
“”
“”
“Task context and intent limits for all contexts: limit <%d>, current <%d>, peak <%d>, allowed <%lu>, rejected <%lu>“
“Task context and intent limits for <%s> <%s>: limit <%d>, current <%d>, peak <%d>, allowed <%lu>, rejected <%lu>“
“Task context and intent limits OK for context <%s>, intent <%s>“
“Task context and intent limits exceeded for context <%s>, intent <%s>“
9400-9499 I18N / UTF-8
“IDENTITY: Object contains CODEPAGE <%s>, LOCALE <%s>,CENCODE <%s>, SENCODE <%s>”
“IDENTITY: Inbound and outbound CM Agent objects are encoded in UTF8”
“IDENTITY: CM Configuration Server is running in legacy mode, UTF8 capable CM Agent must exchange objects in legacy compatibility mode”
“IDENTITY: CM Agent is running in legacy mode”
“IDENTITY: Inbound and outbound CM Agent objects will be encoded forthe locale <%s>”
“IDENTITY: Inbound CM Agent objects will be translated from locale <%s> into UTF8”
“IDENTITY: Outbound CM Agent objects will be translated from UTF8 into locale <%s>”
MessageNumber
NVD9301I
NVD9302I
NVD9304I
NVD9305I
NVD9306I
NVD9307I
NVD9308I
NVD9309I
NVD9310I
NVD9311I
NVD9312I
NVD9313W
NVD9401I
NVD9402I
NVD9403I
NVD9404I
NVD9405I
NVD9406I
NVD9407I
CM Configuration Server Messages 171
Log Message
“IDENTITY: CM Agent LOCALE is missing or blank, expected CM Agentlocale <%s>”
“IDENTITY: CM Agent LOCALE <%s> does not match the CMConfiguration Server system locale <%s>”
“IDENTITY: CM Agent LOCALE <%s> does not match the expected CM Agent locale <%s>”
“IDENTITY: CM Agent CODEPAGE is missing or blank, expected CMAgent codepage <%lu>”
“IDENTITY: CM Agent CODEPAGE <%lu> does not match the CMConfiguration Server system codepage <%lu>”
“IDENTITY: CM Agent CODEPAGE <%lu> does not match the expectedCM Agent codepage <%lu>”
“IDENTITY: Object contains IPADDR <%s>, HOSTNAME <%s>”
“IDENTITY: Changing the task name from <%s> to match the actual CMAgent IP address <%s>”
“IDENTITY: Changing the remote IP name from <%s> to match the actualCM Agent hostname <%s>”
“IDENTITY: Object contains UUID <%s>”
“IDENTITY: Object contains DOMNAME <%s>, ZUSERID <%s>”
9500-9599 I18N / UTF-8
“The CM Configuration Server Database is encoded in <%s>”
“The locale LC_CTYPE is <%s>”
“ERROR, THE CM CONFIGURATION SERVER REQUIRES A LOCALETHAT SUPPORTS UTF8”
“ERROR, PLEASE CORRECT THE LOCALE SETTING AND RESTARTTHE CM CONFIGURATION SERVER”
“Please review the 'locale' command and CM Configuration Serverdocumentation...”
MessageNumber
NVD9410W
NVD9411W
NVD9412W
NVD9413W
NVD9414W
NVD9415W
NVD9420I
NVD9421I
NVD9422I
NVD9423I
NVD9424I
NVD9500I
NVD9501I
NVD9502E
NVD9503E
NVD9504I
9600-9699 Currently Unassigned
172 Chapter 2
Message Log MessageNumber
9700-9799 Currently Unassigned
9800-9899 Currently Unassigned
9900-9999 Currently Unassigned
CM Configuration Server Messages 173
3 CM Configuration Server Response Codes
OverviewMany CM Configuration Server operations (such as the REXX Methods, the Database Utilities, and the ZEDMAMS verbs) send a response code to theCM Configuration Server log that indicates the condition or outcome of theoperation. Depending on the operation and its status, the response code willbe either a return code or a reason code, as described in the sections thatfollow.
Return Codes
The following list of return codes are those that will be generated after a CM Configuration Server operation has completed. These codes are based on theoutcome of the operation and are applicable to all CM Configuration Serverprocesses.
0 OK The operation completed successfully and as expected.
4 Warning The operation completed successfully, but a conditionexists that might require the attention of an administrator.
8 Error The operation failed.
16 Severe Error The operation failed and a condition exists that requires the attention of an administrator.
Reason Codes
Reason codes differ from return codes in that they are seen solely as the result of an abnormal condition during an internal operation on a CM Configuration Server. Therefore, they are associated with return codes 8 and
174
16. The following table lists and describes the reason codes that might beencountered in the CM Configuration Server log.
In order to group similar messages in future, there are intentionalgaps in the sequencing in the following table.
Table 8 CM Configuration Server Reason Codes
Code Description Code Description
100 Invalid arguments 101 No instances updated
102 No classes updated 103 No instances copied
104 No domains deleted 105 ALL instances not written
106 No instances written 107 STRING not found
108 KEYWORD not found 109 KVPARSE not found
110 No parent instance found 111 Attribute entry in error
200 Domain was not found 201 Class was not found
202 Instance was not found 203 No commands present in file
300 File name required 301 Domain name required
302 Class name required 303 Instance name required
304 File name invalid 305 Domain name invalid
306 Class name invalid 307 Instance name invalid
308 TODB value invalid 309 TOINST required
318 TOCLASS required 319 FROMDOMA required
320 FROMCLAS required 321 TODOMAIN required
322 FROMINST required 323 INSTANCE prefix required
324 Domain exists 325 Error deleting resource
326 FLDNAME required 327 LENGTH required
328 TYPE required 329 FIELD required
330 TODATA required 331 FROMDATA required
332 FROMNAME required 333 TONAME required
334 LISTALL required 335 FROMFLD required
336 TOFLD required 337 OLDSUFF required
CM Configuration Server Response Codes 175
Code Description Code Description
338 NEWSUFF required 339 VALUE required
340 COUNT required 341 INFILE required
342 PREVIEW required 343 OLD_PREFIX required
344 NEW_PREFIX required 345 STRING required
346 LENGTH invalid 347 INDEX invalid
348 TYPE invalid 349 ATTRIBUTE NAME INVALID
350 ATTRIBUTE DATA INVALID 351 Instance name too long
352 NOT in DMA format 353 Invalid resource size
354 Resolution size difference 355 Same FROM and TO names
356 Same FROM and TO fields 357 Template structure error
500 MALLOC failed 501 Database path error
502 Database open error 504 Database close error
505 File not found 506 Domain not found
507 Class not found 508 Instance not found
509 Resource not found 510 Error creating class
511 Class lock error 512 Error reading class
513 Class exists already 514 Error writing class
515 Class unlock error 516 Error deleting resource
517 Instance lock error 518 Instance exists already
519 Error reading instance 520 Instance delete error
521 Error writing instance 522 Instance unlock error
523 Error creating domain 524 Error deleting domain
525 Error locking resource 526 Error reading resource
527 Error writing resource 528 Error deleting resource
529 ZEDMAMS.LOG open error 531 FILE open error
532 FILE read error 533 Database locked
534 Corrupt class 535 Corrupt instance
176 Chapter 3
Code Description Code Description
536 Corrupt resource 537 ZFILE open error
538 INPUT file error 539 OUTPUT file error
CM Configuration Server Response Codes 177
A Product Name Changes If you have used Radia in the past, and are not yet familiar with the newlyrebranded HP terms and product names, Table 9 below will help you identifynaming changes that have been applied to the Radia brand.
Table 9 Product Name and Term Changes
New Name/Term
CM agents
HP Configuration Administrator
HP Configuration Management
HP Configuration ManagementConfiguration Server
HP Configuration Management DistributedConfiguration Server
HP Configuration ManagementConfiguration Server Database
Old Name/Term
Radia clients
Radia Administrator Workstation
Radia
Radia Configuration Server, RCS
Radia Distributed Configuration Server,Radia DCS, DMA
Radia Configuration Server Database,Radia Database
178
Index
Aagent connect, 18
end of, 19
allocation messages, 48
Ccache messages, 53, 58
class resolution messages, 76
CM agent, 18
CM agent connection messages, 62
CM Configuration Server
agent type CM agents, 18 EDM clients, 18
CM Configuration Server codes
reason, 174 response, 173 return, 173
CM Configuration Server log, 12
agent connect, 18 communications address, 22 date formats, 21 end of agent connect, 19 example, 20 location, 12 message, 23 message number, 21 message type, 23 object resolution, 19 process ID, 22 reading, 20 sample, 17 settings, 12 shutdown, 19 startup, 18 task ID, 22
task name, 22 task type, 23 time stamp, 21
date formats, 21 viewing, 19
CM Configuration Server messages
numeric ranges, 25 sequential list, 30
codes
reason, 174 response, 173 return, 173
communications address, CM Configuration Server log, 22
communications messages, 33
compress messages, 66
control messages, 140
copyright notices, 2
customer support, 7
Ddatabase and Y2K messages, 78
database messages, 83
database path error messages, 139
database prefix messages, 139
DIRECTORY log setting, 13
DISABLE_NT_EVENT_LOGGING log setting, 13
DISABLE_SNMP_TRAP_LOGGING log setting, 13
DMA messages, 141
documentation updates, 4
EEDM clients, 18
180
edmmapid messages, 99
end of agent connect, 19
error messages, 21, 149
EVENTLOG setting, 17
expansion messages, 48
expression messages, 156
Ffind messages, 136
FLUSH_SIZE log setting, 13
ftp messages, 67
Ggeneral messages, 163
general method messages, 104, 108, 112, 116, 120, 124, 129, 133
Hheap messages, 51
I information messages, 21
informational messages, 153
input/output messages, 67
instance messages, 85
invalid name messages, 139
Llegal notices
copyright, 2 restricted rights, 2 warranty, 2
license and profile messages, 78
LOG setting, 17
logging options, 12
Mmessage detail, 12
message number, CM Configuration Server log, 21
message type, CM Configuration Server log, 23
message, CM Configuration Server log, 23
MESSAGE_DATE log setting, 13
MESSAGE_DELIMITER log setting, 14
MESSAGE_PREFIX log setting, 14
MESSAGE_WIDTH log setting, 14
metaclass resolution messages, 75
MGR_LOG, 13, 22
examples, 14 settings, 13 values of settings, 15
MGR_MESSAGE_CONTROL, 16
settings, 16
MGR_TRACE, 17
settings, 17
miscellaneous messages, 67
multicast messages, 162
Oobject ID messages, 144
object processing messages, 90
object resolution, 19
object resolution messages, 70, 74
objects and variables messages, 86
Ppackage consolidation messages, 134
pipe messages, 66
PIPESIZE log setting, 14
PROC_API messages, 98
process ID, CM Configuration Server log, 22
processid, 23
Rreason codes, 173
resource messages, 95
Index 181
response codes, 173
restricted rights legend, 2
return codes, 173
REXX setting, 17
Ssecurity messages, 76
semaphores and IPC messages, 61
shut down, 19
SNMPTRAP setting, 17
startup, 18
SWITCH_TOD log setting, 14
Ttask ID, CM Configuration Server log, 22
task name, 22
task name, CM Configuration Server log, 22
task type, CM Configuration Server log, 23
taskid, 22
tasklim messages, 169
taskname, 22
technical support, 7
THRESHOLD log setting, 14
time stamp, CM Configuration Server log, 21
trace settings, 12
tree resolution messages, 75
Uupdates to doc, 4
user ID messages, 74
USERLOG setting, 17
V variable substitution messages, 84
Wwarning messages, 21
warranty, 2
Zzattach messages, 103
zconmgr messages, 42
zcvt messages, 41
zlinecmd messages, 42
zlogmgr messages, 33
zmcstmgr messages, 41
zmethod messages, 160
znfy messages, 157
zpools, 61
zrtrymgr messages, 161
zsmtrmgr messages, 46
zsmtsmgr messages, 46
zsnmpmgr messages, 37
zsnmputl messages, 36
zsysinfo messages, 165
ztaskmgr messages, 32
ztcbg messages, 41
ztoptask messages, 30
zutilmgr messages, 36
zvsam messages, 149
182 Index