enterprise network end to end solution
TRANSCRIPT
Summer Internship Program2014
Company Name: Hewlett PackardBranch: HPES
Topic: Advanced Concept ofNetworking
Address:HP Summer Training Nodal Centre,
DN-14
Salt Lake, Kolkata
West Bengal
Amity Institute of TelecomEngineering
And Management
Project Title: Enterprise NetworkEnd to End Solution
Faculty Guide: Neha Arora
Industry Guide: Amit Jaiswal
Submitted By:
Santanu Mukhopadhyay
B-Tech (E&T) (2011-15)
SEC A, En. No.-A1607111013
AMITY UNIVERSITY
Abstract
The sole purpose to study Enterprise Network is to create
business simplicity across worldwide. The side arms of
successful networking are scalability, robustness, fault
identification, communication, modularity, security and
maintaining privacy. The key for making a network is to
provide the essential tools and techniques that will
offer the quality of a private/public network.
As I discussed earlier the key purpose is to create
business simplicity that means creating IT/Infrastructure
simplicity across the cities where an Enterprise Network
is connected. Obtaining success in failure/break-down
conditions is the main purpose of a network. So to
achieve that requirement network designing involves
certain topologies, protocols, bandwidth allocation.
Topology requirement can be described as maintaining two
adjacent networks against any failure in a single link or
node. Protocol requirement can be described as using
dynamic/static routing protocol to provide routes must be
congestion free in a network. Bandwidth allocation is
needed to actively allocate extra bandwidth just to
maintain the working condition in a network. Design and
Modification criteria is all over handed to a person
called Network Administrator, who maintains and solely
responsible for anything(wanted or unwanted) happens in a
network.
(iii)
Acknowledgements
A Summer Internship Project is a golden opportunity for
learning industrial skills and self-development of
practical knowledge. I do consider myself very privileged
to have so many wonderful people lead me through in
completion of my project.
I would like to express my humbled gratitude and special
thanks to Mr. Amit Jaiswal, Lead Trainer, HPES, Salt
Lake, Kolkata (WB) who in spite of being busy with his
duties and daily schedules took time out to guide and
allowing me to carry out my industrial project work at
his esteemed organization .I can’t think where I would
have been without his sincere guidance.
A Sincere thanks to you Sir.
I would like to express my sincere thanks to my faculty
Neha Arora, Faculty, AITEM, Amity University, Noida (UP)
for her guidance and support throughout my training
period in my organization. She supported me by showing
different method of information collection about the
company. She showed me the right direction toward
completion of my summer internship project in stipulated
time period (42 days).
A Sincere thanks to you Madam.
Place: Noida
Date: 15/07/2014 Santanu Mukhopadhyay En.No.-A1607111013 B-Tech (E&T) (2011-15)
AITEM
AMITY UNIVERSITY
(iv)
Declaration
I, Santanu Mukhopadhyay, hereby affirm that My Project
Titled “Enterprise Network End to End Solution” is an
original piece of project work(6 weeks duration) carried
out by me under the expert guidance of Amit Jaiswal (Lead
Trainer, HPES) and Neha Arora (Faculty, AITEM).
DECLARATION
V
LIST OF FIGURES
X
CHAPTER 1
INTRODUCTION
1.1 What is an Enterprise Network
1
1.2 Overview
1
1.3 What is End to End Solution
2
1.4 Different Architecture
3-4
(vi)
1.5 Study of Enterprise Network
5
1.6 Where the money is being spent
6
1.7 Theme
7
1.8 Organization
7
CHAPTER 2
MATERIALS & METHODS
2.1 Basic Setup
8-10
2.2 Methods
11
2.3 Basic Configuration
12-18
2.4 Basic Config. Commands
19
2.4.1 Router
19
2.4.2 RIP V2 Routing
20
2.4.3 IP DHCP Server Pool
20
(vii)
2.4.4 Access List
21
2.4.5 Network Address Translation
21-22
2.4.5.1 Static
21
2.4.5.2 Dynamic
21-22
2.4.6 Port Address Translation
22
2.4.7 TELNET & VLAN Database
23
(ix)
List of Figures
1. Figure 1-Enterprise Network Structure42. Figure 2-Enterprise IT Spending63. Figure 3-Model (.pkt)84. Figure 4-DHCP Server Pool205. Figure 5-VLAN Database236. Figure 6-Basic Routing247. Figure 7-VLAN Configuration258. Figure 8-RIPV2 in USA Router259. Figure 9-Ping Noida Router2610. Figure 10-Making Delhi as DHCP2611. Figure 11-All DNS Servers27
An enterprise network is a communication backbone thathelps connect computers and related devices (smartphones)across various departments in an organization. Anenterprise network helps to minimize the complexitythrough simplification of various communicationprotocols, improving system as well as internal andexternal enterprise data management.Enterprise Networks simplifies IT operations and createsnew possible business opportunities with a flexible endand programmable purpose to networking.
1.2 Overview
1. Networking and Applications2. Connectivity and Services3. Maintenance4. Fault tolerance5. Load balancing6. Integration across systems7. Security
(1)
1.3 What is End to End solution?
At first we have to know what is the basic need for end
to end solution in case of an Enterprise network? So from
a basic human common sense we can think what is the
reason for simplifying?
The answer comes to our mind which is
1. Simplifying (through modification) networking
operations done in a private or public network.
2. Increase in financial output of a government or
private organization.
Rapid increase in smartphone user computer devices and
has created huge traffic congestion in network and
complexity. Useful applications are experiencing an 80
percent increase rate in usage. Networks are failing to
keep compatibility with rapid changes in compute
operations, which often produce problem in end-to-end
delivery.
From the figure 1 we can see that an enterprise network
is created amongst different locations where the routers
are connected through different vast locations like
Punjab, Haryana, Noida, Canada, USA, Dehradun, Greater
Noida, Gurgaon, Delhi and 24 port 3560 multilayer
switches are connected with the routers and the servers
are used for creating server pools across the network. I
used switches for creating connectivity through router
from private pcs.so if the user from USA wants to connect
with the user of Noida, traffic congestion arises ass it
covers a vast distance along with network congestion. So
here to simplify the networking path, End to End
Enterprise Network Solution is needed.
(2)
1.4 Architecture
1. Nano level architecture (A Single PC in an
Organization)
(Issue- Application related) (EX- A student in AMITY)(A
single machine and a router)
2. Micro level architecture (A Single Subnet in an
Organization)
(Issue-Resource sharing)(Ex-A lab in AMITY)(Approximately
10’s of machines, 1-2 switches, 1000m cabling)
3. Mili level architecture (A Single Entity in large
Office)
(Issue-Management and deployment)(Ex-AITEM in AMITY)
(Approximately 100’s of machines, 10-20’s switches, 3-5
Routers, 5 servers)
4. Typical level architecture (A Single Organization)
(Issues- Different resource monitoring)(Ex-AMITY)
(Approximately 10’s locations, 1000’s of machines, 100’s
of switches, 10’s of routers)
5. Kilo level architecture (National Network)
(Issue- Scalability) (Ex-LIC)(Approximately 100’s of
locations, 10000’s of machines, 1000’s of switches, 100’s
of routers)
6. Mega level architecture (Wide Network for a single
organization)
(Issue-Robustness)(Ex-INTEL)(Approximately 10’s of
countries, 1000s of locations)
7. Giga level architecture (Wireless Access)
(Issue-Control operations)(100’s of organizations, 100’sof countries, billions of devices)
(3)
FIG 1 Enterprise Network (Structure)
So as we can say in the image that an ENTERPRISE NETWORK
supports thousands of users across the wide geographical
range of a company including thousands of servers in each
of the cities, each system is linked with each other in
the network so here complexity arises.
1. It is large as it can include 100000’s edge devices
and 10000’s network devices.
2. It is Geographically Distributed amongst multiple
countries.
3. The Network Administrator has the supreme priority
over the entire network.
(4)
1.5 Why we should study Enterprise
Network?
1.5.1 Money/Fund
Enterprise IT industries are spending lots of funds toimprove, which is expected to increase steadily. In Indiarapid growth of IT Services as well as IT relatedbusiness complexity is the main sole reason for investingin Enterprise IT applications and its infrastructure tominimize the level of complexity. Right now it’s about200 million dollar spent.
1.5.2 Challenging Problems
1. Resource Management.
2. Network security and privacy management.
3. Capacity of a private or public network.
1.5.3 Others
1. Increasing gadgets (smartphones, tablets and laptops)
and broadband access-technologies demand for new services
and applications worldwide.
(5)
1.6 Where the money is being spent??
1. Increasing connectivity requirements including VPN
solutions.
2. Maintaining corporate information and resources.
3. Wide range of services including mobile devices.
4. IT applications for health purpose, financial
purposes.
5. Security solutions for multinational corporate
offices.
FIG 2 Enterprise IT Spending (2013 Budget)
(6)
1.7 Theme
Enterprise Network is the basic solution with respect to
business and financial view of an organization. It simply
offers great value by creating End to End solution and as
the whole control of this network can be handled over the
priority of a Network Administrator so it can be
integrated and improved in future if we need it.
1.8 Organization
Hewlett-Packard Company or HP is an American
multinational information technology corporation
headquartered in Palo Alto, California, United States. It
provides hardware, software and services to consumers,
small and medium-sized businesses (SMBs) and large
enterprises, including customers in the government,
health and education sectors.
The company was founded in a one-car garage in Palo Alto
by William Bill Redington Hewlett and Dave Packard. HP is
the world's leading PC manufacturer and has been since
2007, fending off a challenge by Chinese manufacturer
Lenovo, according to Gartner. It specializes in
developing and manufacturing computing, data storage, and
networking hardware, designing software and delivering
services. Major product lines include personal computing
devices, enterprise and industry standard servers,
related storage devices, networking products, software
and a diverse range of printers and other imaging
products. HP markets its products to households, small-
to medium-sized businesses and enterprises directly as
well as via online distribution, consumer-electronics and
office-supply retailers, software partners and major
technology vendors. HP also has services and consulting
business around its products and partner products. In
2013 it was the world's second-largest PC vendor by unit
sales.
(7)
CHAPTER 2______________________________
Materials & Methods
2.1 Basic Setup
Software Required-CISCO Packet Tracer
(6.0.1)
FIG 3 Model (.pkt)
Enterprise Network is meant for creating business
simplicity with simplifies networking approach.
Maintaining this similarity I made an Enterprise Network
covering these cities and countries and State of India.
1. Canada
(8)
2. Greater Noida
3. Gurgaon4. Delhi
5. Punjab
6. Haryana
Now Branch networks are
1. USA connected with Greater Noida router.
2. Dehradun connected with Gurgaon router.
3. Noida connected with Delhi router.
4. UP connected with Punjab router.
And hereby they are branch networks are connected with
the main network.
I used Generic routers in this network.
Here I used two Multilayer switch (3560 series, 24 ports)
(Layer 3), first one is connected with Canada router and
second one is connected with UP router.
Here I used three Generic Domain Name System Servers
(www.yahoo.com(Delhi router), www.dit.com(Haryana
router), www.hpes.com (Noida router)), first one is
connected with Delhi router, second one with Noida router
and third one with Haryana router via 2950T 24 Switch
(Delhi-Switch 12, Noida-Switch 24, Haryana-Switch 23).
Branch router Dehradun (Connected via Gurgaon router to
the main network) is connected with two 2950T 24ps
switch(Switch 30 & switch 20), first switch is connected
with two private pc’s(pc 28 pc 29) and second one with
three pc’s(pc-30,31,51)
(9)
Branch router USA (Connected via Greater Noida router to
the main network) is connected with two 2950T-24 switch
(Switch 21 & Switch 22). First switch is connected with
two private pc’s (pc-32, 33) and second one with two pc’s
(pc-49, 50).
Canada router is connected with a 3560-24ps Multilayer
Switch 6, which is connected with three 2960-24TT
switches(Switch-13,14,15), and all three switches are
connected with two private pc’s each(Switch 13-pc 46 & pc
48),(Switch 14-pc 43 & pc 47),(Switch 15-pc 44 & pc 13).
Branch router UP (Connected with the main network via
Punjab Router) is connected with a 3560-24ps Multilayer
Switch5, which is connected with three 2960-24TT
switches(Switch-16,17,18), and all three switches are
connected with three private pc’s each(Switch 16-pc
34,35,36)(Switch 17-pc 37,38,39)(Switch 18-pc 40,41,42).
All routers has two serial ports
1. Serial 2/0
2. Serial 3/0
Two Fast Ethernet port
1. Fast Ethernet 0/0
2. Fast Ethernet 0/1
VLAN Admin-192.168.5.0/24 VLAN Finance-192.168.6.0/24
VLAN Students-192.168.1.0/24 VLAN Faculty-192.168.2.0/24
VLAN HP-192.168.3.0/24
(10)
2.2 Methods
1. Basic Configuration (VLAN, VTP, Inter-VLAN)
2. RIP V2 Routing.
3. VLAN finance should not communicate with anyone in the
network.
4. Noida Router can ping any pc but none can ping it but
can access www.hpes.com
5. Make Delhi Server DHCP to provide the IP’s to all
leaving multilayer switch network.
6. Apply PAT on USA.
7. PC 28 should not communicate with PC 33.
8. Apply Static NAT on the server of Haryana.
9. All 3 DNS Server should be accessible by all pc’s.
(11)
2.3 Basic Configuration
Starting from the Canada Router
(“Se.-Po.2/0”) (UP) [“IP address 10.0.0.98/27 (SM)”]
(“Se.-Po.3/0”) (Down) {NOT SET}
(“Fa.-Eth. 0/0”) (UP) [“IP Address-10.0.1.33/27 (SM)”]
(“Fa.-Eth. 1/0”) (DOWN) {NOT SET}
Dehradun Router
(“Fa.-Eth. 1/0”) (UP) [“IP-192.168.1.1/24 (Sub Ma.)”]
(“PC-PT PC 28”) [((“IP-192.168.1.6”) (“SM”) (“DG-
192.168.1.1”) (“DNS-192.168.7.2))”]
(“PC-PT PC 29”) [((“IP-192.168.1.5”) (“SM”) (“DG-
192.168.1.1”) (“DNS-192.168.7.2))”]
(“Fa.-Eth. 0/0 IP”) (UP) [(“192.168.2.1/24”) (“SM”)]
(“PC-PT PC 30”) [((“IP-192.168.2.7”) (“SM”) (“DG-
192.168.2.1”) (“DNS-192.168.7.2”))]
(“PC-PT PC 31”) [((“IP-192.168.2.6”) (“SM”) (“DG-
192.168.2.1”) (“DNS-192.168.7.2”))]
(“Se.-Po.2/0”) (UP) [(“IP address -10.0.0.1/27”) (“SM”)]
(“Se.-Po.3/0”) (DOWN) {NOT SET}
(12)
USA Router
(“Fa.-Eth. 0/0”) (UP) [(“IP Address -192.168.3.1/24”)
(“SM”)]
(“PC-PT PC 32”) [((“IP-192.168.3.5”) (“SM”) (“DG-
192.168.3.1”) (“DNS-192.168.7.2”))]
(“PC-PT PC 33”) [((“IP-192.168.3.6”) (“SM”) (“DG-
192.168.3.1”) (“DNS-192.168.7.2”))]
(“Fa.-Eth. 1/0”) (UP) [(“IP Address -192.168.4.1/24”)
(“SM”)]
(“PC-PT PC 49”) [((“IP-192.168.4.5”) (“SM”) (“DG-
192.168.4.1”) (“DNS-192.168.7.2”))]
(“PC-PT PC 50”) [((“IP-192.168.4.6”) (“SM”) (“DG-
192.168.4.1”) (“DNS-192.168.7.2”))]
(“Se.-Po.2/0”) (UP) [(“IP address -10.0.0.66/27”)
(“SM”)]
(“Se.-Po.3/0”) (DOWN) {NOT SET}
Gurgaon Router
(“Se.-Po.2/0”) (UP) [(“IP address 10.0.0.2/27”) (“SM)”]
(“Se.-Po.3/0”) (UP) [(“IP address 10.0.0.33/27”) (“SM”)]
(“Se.-Po.6/0”) (UP) [(“IP address 10.0.0.129/27”)
(“SM”)]
(“Fa-Eth. 0/0”) (DOWN) {NOT SET}
(“Fa.-Eth. 1/0”) (DOWN) {NOT SET}
(13)
Greater Noida Router
(“Se.-Po.2/0 “) (UP) [(“IP address 10.0.0.34/27”)
(“SM”)]
(“Se.-Po.3/0”) (UP) [(“IP address 10.0.0.65/27”)
(“SM”)]
(“Se.-Po.6/0”) (UP) [(“IP address 10.0.0.97/27”)
(“SM”)]
(“Fa.-Eth. 0/0”) (DOWN) {NOT SET}
(“Fa.-Eth. 1/0”) (DOWN) {NOT SET}
Delhi Router
(“Se.-Po.2/0”) (UP) [(“IP address 10.0.0.130/27”)
(“SM”)]
(“Se.-Po.3/0”) (UP) [(“IP address 10.0.0.193/27”)
(“SM”)”]
(“Se.-Po.6/0”) (UP) [(“IP address 10.0.0.161/27”)
(“SM”)]
(“Fa.-Eth. 0/0”) (UP) [(“IP Address”) (“SM”)]
(“Fa.-Eth. 1/0”) (DOWN) {NOT SET}
Noida Router
(“Se.-Po.2/0”) (UP) [(“IP address 10.0.0.162/27”)
(“SM”)]
(“Se.-Po.3/0”) (DOWN) {NOT SET}
(“Fa.-Eth. 0/0”) (UP) [(“IP Address 192.168.8.1/24”)
(“SM”)]
(“Fa.-Eth. 1/0”) (DOWN) {NOT SET}
(14)
Punjab Router
(“Se.-Po.2/0”) (UP) [(“IP address 10.0.0.194/27”)
(“SM”)]
(“Se.-Po.3/0”) (UP) [(“IP address 10.0.0.225/27”)
(“SM”)]
(“Se.-Po.6/0”) (UP) [(“IP address 10.0.1.1/27”) (“SM”)]
(“Fa.-Eth. 0/0”) (DOWN) {NOT SET}
(“Fa.-Eth. 1/0”) (DOWN) {NOT SET}
Haryana Router
(“Se.-Po.2/0”) (UP) [(“IP Address 10.0.1.2/27”) (“SM”)]
(“Se.-Po.3/0”) (D0wn) {NOT SET}
(“Fa.-Eth. 0/0”) (UP) [(“IP Address 192.168.9.1/24”)
(“SM”)]
(“Fa.-Eth. 1/0”) (DOWN) {NOT SET}
UP Router
(“Se.-Po.2/0”) (UP) [(“IP address 10.0.0.226/27”)
(“SM”)]
(“Se.-Po.3/0”) (D0WN) {NOT SET}
(“Fa.-Eth. 0/0”) (UP) [(“IP Address 10.0.1.66/24”)
(“SM”)]
(“Fa.-Eth. 1/0”) (DOWN) {NOT SET}
(15)
For server (www.yahoo.com)
(“IP Address”) [“192.168.7.2/24”]
(“SM”) [“255.255.255.0”]
(“DG”) [“192.168.7.1”]
(“DNS”) [“192.168.7.2”]
(“Fa.-Eth. 0/0”) (UP) [“192.168.7.2”]
For Server (www.dit.com)
(“IP Address”) [“192.168.9.5/24”]
(“SM”) [“255.255.255.0”]
(“DG”) [“192.168.8.1”]
(“DNS”) [“192.168.7.2”]
(“Fa.-Eth. 0/0”) (UP) [“192.168.7.2”]
(16)
Multilayer Switch 6
(“VLAN 1”) (DOWN) {NOT SET}
(“VLAN 2”) (UP) IP [(“192.168.5.1/24”)]
(“VLAN 3”) (UP) IP [(“192.168.6.1/24”)]
(“Fast Ethernet 0/4”) (UP) IP [“10.0.1.34/27 (SM)”]
(“PC-PT PC 46”) [((“IP-192.168.6.2”) (“SM”) (“DG-
192.168.6.1”) (DNS-192.168.7.2”))]
(“PC-PT PC 48”) [((“IP-192.168.5.2”) (“SM”) (“DG-
192.168.5”) (“DNS-192.168.7.2”))]
(“PC-PT PC 13”) [((“IP-192.168.5.4”) (“SM”) (“DG-
192.168.5.1”) (“DNS-192.168.7.2”))]
(“PC-PT PC 44”) [((“IP-192.168.6.4”) (“SM”) (“DG-
192.168.6.1”) (“DNS-192.168.7.2”))]
(“PC-PT PC 47”) [((“IP-192.168.6.3”) (“SM”) (“DG-
192.168.6.1”) (“DNS-192.168.7.2”))]
(“PC-PT PC 43”) [((“IP-192.168.5.3”) (“SM”) (“DG-
192.168.5.1”) (“DNS-192.168.7.2”))]
Multilayer Switch 5
(“VLAN 1”) (DOWN) {NOT SET}
(“VLAN 2”) (UP) [(“IP 193.168.1.1/24”))]
(17)
(“VLAN 3”) (UP) [(“IP 193.168.2.1/24”)]
(“VLAN 4”) (UP) [(“IP 193.168.3.1/24”)]
(“Fa.-Eth. 0/1”) (UP) IP [(“10.0.1.65/27 (SM)”))]
(“PC-PT PC 34”) [((“IP-192.168.1.4”) (“SM”) (“DG-
192.168.1.1”) (“DNS-192.168.7.2”))]
(“PC-PT PC 35”) [((“IP-192.168.2.4”) (“SM”) (“DG-
192.168.2.1”) (“DNS-192.168.7.2”))]
(“PC-PT PC 36”) [((“IP-192.168.3.4”) (“SM”) (“DG-
192.168.3.1”) (“DNS-192.168.7.2”))]
(“PC-PT PC 37”) [((“IP-192.168.1.3”) (“SM”) (“DG-
192.168.1.1”) (“DNS-192.168.7.2”))]
(“PC-PT PC 38”) [((“IP-192.168.2.3”) (“SM”) (“DG-
192.168.2.1”) (“DNS-192.168.7.2”))]
(“PC-PT PC 39”) [((“IP-192.168.3.3”) (“SM”) (“DG-
192.168.3.1”) (“DNS-192.168.7.2”))]
(“PC-PT PC 40”) [((“IP-192.168.3.2”) (“SM”) (“DG-
192.168.3.1”) (“DNS-192.168.7.2”))]
(“PC-PT PC 41”) [((“IP-192.168.2.2”) (“SM”) (“DG-
192.168.2.1”) (“DNS-192.168.7.2”))]
(“PC-PT PC 42”) [((“IP-192.168.1.2”) (“SM”) (“DG-
192.168.1.1”) (“DNS-192.168.7.2”))]
(18)
2.4 Basic Configuration Command
2.4.1 Router
Router> Enable
Router# Configure terminal
Router(config) # int fa (0/0, 1/0)
Route (config-if)# ip address (ip address) (subnet mask)
Router(config-if)# no shutdown
Router(config-if)#exit
Router(config)#int serial 2/0
Router(config-if)# ip address (ip address) (subnet mask)
Router(config-if)# no shutdown
Router(config-if)# exit
Router(config)#int serial 3/0
Router(config-if)# ip address (ip address) (subnet mask)
Router(config-if)# no shutdown
Router(config-if)# exit
No Shutdown command is used to change the state of
Interface from UP to DOWN or from DOWN to UP.
(19)
2.4.2 RIP V2 Routing
Router(config)# router rip
Router(config)# version 2
Router(config-router)# (Connected Network1 address)
Router(config-router)# (connected Network2 address)
2.4.3 To make Delhi Server DHCP to provide
the IP’s to all leaving multilayer switch
network
FIG 4 DHCP Server Pool
(20)
2.4.4 Access List
Router(config)# access list 1 deny host ip address
Router(config)# interface fastethernet 0/0
Router(config-if)# ip access-group 1 in
Router(config)# access-list 1 permit any
2.4.5 Network Address Translation
2.4.5.1 Static
Router(config)# interface fastethernet 0/0
Router(config-if)# ip nat inside
Router(config)#interface serial 0/0/0
Router(config-if)# ip nat outside
Router(config)# ip nat inside source static public ip
address private ip address
2.4.5.2 Dynamic
Router(config)# interface fastethernet 0/0
Router(config-if)# ip nat inside
(21)
Router(config)#interface serial 0/0/0
Router(config-if)# ip nat outside
Router(config)# ip nat pool HPES (Global ip add.) (Avl.
Ip add.) Subnetmask
Router(config)# ip nat inside source list 10 HPES
Router(config)# access-list 10 permit private ip add.
Subnetmask
Port Address Translation
Router(config)# interface fastethernet 0/0
Router(config-if)# ip nat inside
Router(config)#interface serial 0/0/0
Router(config-if)# ip nat outside
Router(config)# ip nat inside source list 10 interface
serial 0/0/0 overload
Router(config)# access-list 10 permit ip add. Subnetmask
(22)
Creating TELNET Password
Pat(Configure)#Line vty 0 4 (password)
Pat(Configure-Line)#Login
Pat(Configure-Line)#Password
Pat(Configure-Line)#Exit
VLAN Database
FIG 7 VLAN configuration
2. RIPV2 routing successful.
FIG 8 RIPV2 in USA router
3. VLAN finance is not communicating with anyone in the
network.
4. Noida Router can ping any pc but none can ping it but
can access www.hpes.com . That means configuring Access
List on Noida router successful.
(25)
FIG 9 Pinging Noida Router Unsuccessful
5. Making Delhi Server DHCP to provide the IP’s to all
leaving multilayer switch network is successful.
FIG 10 Making Delhi server DHCP
6. Applying PAT on USA router successful.
7. PC 28 is not communicating with PC 33.
(26)
8. Apply Static NAT on the server of Haryana is
successful.
9. All 3 DNS Servers are accessible by all Pc’s in the
network.
Conclusion
To conclude I would like to say that I have successfully
completed the basic and soul purpose of my project which
is to create an Enterprise Network which offers End to
End Solution across multiple cities, Countries through
which it is connected.
The Basic Fundamentals and aims I think I have
successfully achieved and implemented but as nothing can
be perfect so as my project, it needs better implications
in future.
According to me I have completed my project still I am
left with lots of improvements and enhancements of this
projected structure. I will try my level best to complete
it in my near future.
(28)
Recommendations
Although I have completed my project successfully but
there can be made few extensions
1. CISCO PACKET TRACER should be updated to next version,
as it lags sometimes.
2. Using different colors in the software makes it easy
to understand the difficult network architecture.
3. Try to make a network which is broader to understand,
means there should be sufficient gap between router
switch and multilayer switches of different cities
(29)
CHAPTER5_____________________________
Implications for Future Research
The Enterprise of the Future will need to be hungry for
change and disruptive by nature, innovative beyond
customer imagination, global integrated, and genuine, not
simply generous in their corporate social responsibility
efforts. Each of these issues has clear implications for
the workforce, and for the leaders of the Human Resources
function who are working to enhance organizational
effectiveness.
Building the Enterprise of the Future:
The Workforce
DimensionThe Enterprise Network of the Future is globally
integrated and designed – leveraging the most appropriate
talent and expertise regardless of its geographic
location. To make the most of a global workforce
organizations need to develop an HR capability that can
deliver cost-effective services to a global population,
provide an infrastructure that enables individuals to
work together regardless of their locations, and develop
leadership competencies that can deliver results and
provide guidance to a myriad of stakeholders. Lastly,
corporate social responsibility is playing a larger role
in today’s enterprises. Engaging the workforce in these
efforts can have a positive impact on both employee
attraction and retention, yet many companies have not
engaged the workforce around this topic.
.
(30)
CHAPTER 6
___________________________
Appendix
Working in CISCO Packet Tracer Software is very
interesting according to me. We know our generation is
fond of mobiles and their configuration (Android, IOS,
Symbian) Going through the CISCO Packet Tracer software I
understood that it is very similar because everything you
are configuring is clearly visible as there is not any
virtual level, you can test your correctness of
configuration while you are writing the program, may be
in routers, in switches or in servers(Command Line
Interface or in Global Configuration Mode).It was a nice
experience of 6 weeks working in this highly customizable
Network Simulation Software.
(31)
CHAPTER 7____________________________
References
1. HP Internship Material.
2. Enterprise Network Convergence-
Sridhar Iyer
3. CISCO Packet Tracer (v 6.0.1)
4. Implications for the Workforce-An
IBM CEO Study
(32)
CHAPTER
8__________________________
PLAGIARISM CHECK RESULT
Source- Turn it in Software (Amity University)