energy division - red tecnológica mid

Loadlimiter XSMCB Distribution Board System

http://energy.tycoelectronics.comEnergy Division

DS289 Loadlimiter XS 11/14/03 2:38 PM

Loadlimiter XS MCB Distribution Board System

1

FeaturesOptional Incomers

Large space for cabling

Split earth and neutral

BenefitsEasy to configure on site

Simple installation

Earth/neutral terminal close to phase terminal

ApplicationsThis range is suitable for commercialand industrial. Final circuit protection.

StandardsEN 60898 MCBs

EN 61095 Contactors

EN 61009 RCBOs

EN 61008 RCCBs

EN 60439-3 Distribution Boards

Loadlimiter XS has taken the innovative features of its predecessor and expandedthem to create a truly versatile distribution system. Inclusions to the range feature asuite of units fitted with a 200A switch disconnector as standard, a completelyrevised range of MCBs and single module RCBOs.

Aesthetically similar to the original to assist with retrofits, the design ensures that theproduct is unobtrusive and suitable for any application. However, once inside theunit the true benefits of the design are revealed. Both the installer and end user cantake advantage of features that make the range quick to install and very easy to use.

The range is completed by a comprehensive list of RCCBs, switch disconnectors,MCCBs, fuse switches and modular control and automation devices.

Contents Page No.

Loadlimiter XS MCBs, RCBOs, RCCBs and Modular Devices

Benefits and Features 2

Characteristic Curves for MCBs and RCBOs 2

Technical Specifications for MCBs and RCBOs 2

1 Pole, 2 Pole and 3 Pole Miniature Circuit Breakers 3

Accessories for MCBs and RCBOs 3

1 and 2 Module RCBOs 4

2 Pole and 4 Pole RCCBs 4

2 Pole, 3 Pole and 4 Pole DIN Rail Mounted Contactors 5

Single Module DIN Rail Mounted Auxiliary Devices 5

2 and 4 Module DIN Rail Mounted Programmable Timers 5

Sheet Steel General Purpose Enclosures IP4X 5

Insulated General Purpose Enclosures IP4X 5

Insulated General Purpose Enclosures IP65 5

Loadlimiter XS Distribution Boards and Service Centres

Standard TP&N Distribution Boards 6

Incoming Connection Kits for Standard TP&N Distribution Boards 6

Accessories for all TP&N Distribution Boards 6

TP&N Distribution Boards with 200A Switch Disconnector 7

Modular TP&N Distribution Boards 7

Incoming Options for Modular Distribution Boards 7

Service Centres for all TP&N Distribution Boards 7

SP&N Distribution Boards 8

Service Centres for SP&N Distribution Boards 8

Incoming Options for SP&N Distribution Boards 8

Accessories for SP&N Distribution Boards 8

Dimensions for Distribution Boards and Service Centres 9

DS289 Loadlimiter XS 11/14/03 2:38 PM Page 3


2

Easy fit padlockingdevice allows MCB to belocked in either position.

‘GREEN/RED’ indicatorsgive positiveconfirmation of contactposition.

RCBOs available insingle module anddouble module versions.

Single module shunttrip, UVR, and auxiliarycontacts are easily fittedto MCBs.

Shielded dual terminals are positionedsymmetrically on both ends of the MCB. Thisarrangement allows simultaneous connection ofcables up to 35mm2 and busbars up to 3mm thick.

MCB and RCBO Features

3600

t (s)

12060

10

1

0.1

0.0111.13

1.452.55

3 5 10 20 ln (a.c.)

MCB Time/Current Characteristics

EN 60898 StandardCircuit breakers intended for the protection against overcurrents of wiring installations inbuildings and similar applications:

They are designed for use by uninstructed people and for not being maintained.

Magnetic ReleaseAn electromagnet with plunger ensures instantaneous tripping in case of short circuit.The EN 60898 distinguishes three different types, following the current for instantaneousrelease: type B, C, D.

Test Tripping Applications

Current (a.c.) time

B 3In t≥0.1s Only for resistive loads such as:5In t<0.1s – electrical heating

– water heating– cookers

C 5In t≥0.1s Usual loads such as:10In t<0.1s – lighting

– socket outlets– small motors

D 10In t≥0.1s Control and protection of circuits20In t<0.1s having important transient

inrush currents (large motors)

Thermal ReleaseThe release is initiated by a bimetal strip in case of overload. The standard defines therange of release for specific overload values. Operating Temperature -20ºC to +55ºC

Test Tripping

Current (a.c.) time

1.13 In t≥1h (In ≤ 63A)t≥2h (In > 63A)

1.45 In t<1h (In ≤ 63A)t<2h (In > 63A)

2.55 In 1s < t < 60s (In ≤ 32A)1s < t < 120s (In > 32A)

Short Circuit Ratings

MCB Voltage Voltage EN60898

Type (a.c.) (d.c.) Icn (kA)

B 230 60* 10B 400 60* 10C 230 60* 10C 400 60* 10D 230 60* 10D 400 60* 10

* 110V dc, 2 poles in series

Loadlimiter XS - 10kA MCBs

• IP20 degree of protection

• Shunt trip, UVR and auxiliary accessories available

• Un: 230/400V ac (1p) 400V ac (2p, 3p)

• Service voltageUb min. 12V ac/dcUb max. 460V ac/110V dc

• Impulse withstand voltage Uimp 6kV

• Class 3 up to 40A Standards: EN60898, IEC 60898

• Current ratings: B, C & D types; 6 - 63A

Loadlimiter XS - MCB Accessories

• Auxiliary contacts (One changeover contact)

• Signal/Auxiliary contact (One changeover contact or signal)

• Shunt trips (110V-415V ac, 110V-125V dc, 48V ac/dc)

• All single module width

• Dolly padlocking device



3

Single Pole MCBs

Double Pole MCBs

Triple Pole MCBs

Single Pole MCBs• Conforms to EN 60898• 10kA rated breaking capacity• Contact position indicator• 35mm2 cable capacity

Current B Type C Type D Type

Rating (A) Cat No Cat No Cat No

6 X1PB06 X1PC06 X1PD0610 X1PB10 X1PC10 X1PD1013 X1PB13 X1PC13 X1PD1316 X1PB16 X1PC16 X1PD1620 X1PB20 X1PC20 X1PD2025 X1PB25 X1PC25 X1PD2532 X1PB32 X1PC32 X1PD3240 X1PB40 X1PC40 X1PD4050 X1PB50 X1PC50 X1PD5063 X1PB63 X1PC63 X1PD63

Double Pole MCBs




Triple Pole MCBs




Accessories for MCBs and RCBOs

Desciption Picture Cat No

Auxiliary Equipment

MCB aux contact (one changeover contact) - XAC2MCB signal/aux contact (one changeover contact or signal) 1 XCS2MCB shunt trip (110-415V ac, 110-125V dc) - XST415MCB shunt trip 12-48V ac/dc - XST48MCB undervoltage release (240V ac)Time delay adjustable 0-300mS - XUVR240

Padlocking

MCB/RCBO dolly locking device 2 XDLPadlock for dolly locking device 2 XPL

Blanking Pieces

MCB blanks (4x3 MCB ways + 12 busbar terminal blanks) 3 DBXBPMCB blanks (5x1 MCB ways + 5 busbar terminal blanks) 4 DBXBMMCB blanks (5x1/2 MCB ways) - DBXBH

Accessories for MCBs and RCBOs

1 2

3 4



4

RCBOs

2 Pole RCCBs

4 Pole RCCBs

RCBOs• Conforms to EN 61009• Double module: Type AC• Single module: Type A• Single module unit 10kA rated breaking capacity• Double module unit 10kA rated breaking capacity (Unless otherwise stated)• Terminal capacity: Top terminals 10mm2 Bottom terminals 25mm2

Current Sensitivity (mA) Single Module Double Module

Rating (A) Cat No Cat No

6 30 XR1PC0630 AR063010 30 XR1PC1030 AR103010 (6kA) 10 - AR101016 (6kA) 10 - AR161016 30 XR1PC1630 AR163020 30 XR1PC2030 AR203025 30 - AR253032 30 XR1PC3230 AR323040 30 - AR4030

2 Pole RCCBs• Conforms to EN 61008• Equipped with transient suppression filter• Voltage 230/400V 50/60Hz• Type AC• Terminal capacity: 40A-63A – 25mm2 100A – 35mm2

• 35mm2 cable capacity

Current Sensitivity (mA) Width Double Module

Rating (A) Cat No

25 30 35 LLM25/30/240 30 35 LLM40/30/263 30 35 LLM63/30/2100 30 35 LLM100/30/240 100 35 LLM40/100/263 100 35 LLM63/100/2100 100 35 LLM100/100/263 300 35 LLM63/300/2

4 Pole RCCBs• Conforms to EN 61008• Equipped with transient suppression filter• Voltage 230/400V 50/60Hz• Type AC• Terminal capacity: 40A-63A – 25mm2 100A – 35mm2

• 35mm2 cable capacity

Current Sensitivity (mA) Width Double Module

Rating (A) Cat No

40 30 70 LLM40/30/463 30 70 LLM63/30/4100 30 70 LLM100/30/440 100 70 LLM40/100/463 100 70 LLM63/100/4100 100 70 LLM100/100/463 300 70 LLM63/300/4100 300 70 LLM100/300/4



5

Contactors

Auxiliary Devices

Programmable Timers

Contactors – DIN rail mounted• Conforms to EN 61095• 240V control voltage

Current No of Width Without Manual With Manual

Rating (AC7a) Poles (mm) Override Override

Cat No Cat No

25 2 17.5 LLM2P25C LLM2P25CM25 3 35 LLM3P25C LLM3P25CM25 4 35 LLM4P25C LLM4P25CM40 3 53 LLM3P40C LLM3P40CM40 4 53 LLM4P40C LLM4P40CM63 3 53 LLM3P63C -63 4 53 LLM4P63C -Venting kit* 9 LLMV LLMV

* 9mm wide ventilation module for fitting between alternate pairs of contactors toprevent overheating.

Auxiliary Devices – DIN rail mounted • 240V ac• 2.5mm terminal capacity• 17.5mm width

Current Function Cat No Function Cat No

Rating (A)

Switches

16 1 n.o. LLM1P16N0 1 n.o. + neon LLM1P16N0N16 2 n.o. + neon LLM2P16N0N 1 changeover/c.o. LLM1P16C016 1P 2 way c.o. LLM1P162W 2P 2 way c.o. LLM2P162WPushbuttons

6 1 n.o. LLMPBNO 1 n.o. + neon LLMPBNON6 1 n.o. + 1 n.c. LLMPBNONCIndicators

6 red LLMPLR green LLMPLG6 clear LLMPLC

Programmable Timers – DIN rail mounted• 240V ac 50-60Hz• 250 hour reserve• 7 day

Nominal Current Function Width Cat No

Rating (AC7a) (AC7b)

Lux Controller

10 6 2-2000 Lux 72 RLP1Timer

16 – 1 channel 35 RTIDWR16 10 2 channel 35 RT2DWR

A suitably rated contactor should be employed with timers, programmers and relayswhen highly inductive or capacitive loads are to be controlled.

General Purpose Enclosures – Surface/Flush mounted

Number Ways Weight Height Width Depth Picture Cat No

(18mm modules) (Kg) (mm) (mm) (mm)

Insulated (IP4X)

2 0.1 130 50 60 2 LLMGPI24 0.2 130 86 60 2 LLMGPI48 0.6 162 214 92 3 LLMGPI8Sheet Steel (IP4X)

6 1.0 225 134 73 1 LLMGPS6S6 1.0 250 160 73 1 LLMGPS6FInsulated (IP55) Surface Mounted

5 0.5 175 125 115 4 LLMGPW58 0.8 175 214 115 4 LLMGPW8General Purpose Enclosures

1 2

3 4



6

Standard TP&N Distribution Boards• Incomers not included• Conforms to EN 60439-3• 200A busbars• Neutral and earth terminal for each SP way• IP4X• Clean earth facility

Outgoing Weight Height Width Cat No

3 Pole Ways (kg) (mm) (mm)

4 13 544 430 DB04X6 15 598 430 DB06X8 17 651 430 DB08X12 19 758 430 DB12X16 22 865 430 DB16X20 25 1025 430 DB20X24 28 1132 430 DB24X

Incoming Connection Kits

Current Sensitivity Poles Max Cable Picture Device Kit

Rating (A) (mA) (mm2) Cat No Cat No*

Switch Disconnector

100 - 3 50 1 AV3100 n/a100 - 4 50 2 AV4100 DBXSC125 - 3 50 1 AV3125 n/a125 - 4 50 2 AV4125 DBXSCRCCB

40 30 4 35 3 LLM40/30/4 DBXRC63 30 4 35 3 LLM63/30/4 DBXRC100 30 4 35 3 LLM100/30/4 DBXRC40 100 4 35 3 LLM40/100/4 DBXRC63 100 4 35 3 LLM63/100/4 DBXRC100 100 4 35 3 LLM100/100/4 DBXRC63 300 4 35 3 LLM63/300/4 DBXRC100 300 4 35 3 LLM100/300/4 DBXRCContactors

25 4 - 4 LLM4P25C DBXCC40 4 - 4 LLM4P40C DBXCC63 4 - 4 LLM4P63C DBXCCFuse Switch

100 3 70 5 HBF3P100N DBXFSA1200 3 150 5 HBF3P200N DBXFSA2Direct Connection

- - 35 6 DBXD0- - 70 6 DBXD1- - 150 7 DBXD2

DBXMP Mounting Plate - included from Jan 2004

Standard TP&N Distribution Boards

Incomer Connection Kits

1 2

3


4 5

6 7

Accessories

8 9

10 11


TP&N Dist. Board Kits

TP&N to SP&N conversion kit 8 DBXTSVertical stacking/coupling kit 9 DBXMKSpare end plate - DBXPBlanking Kits

Busbar terminal blanks (x10) 10 DAXTPTerminal Bars

6 way terminal bar 11 DBXT0612 way terminal bar 11 DBXT1218 way terminal bar 11 DBXT1824 way terminal bar 11 DBXT24


Earth Bar Kits

Earth bar 11 DAXEBEarth bar isolation kit 11 DBXLDoor Lock Kits

Cylinder door lock - DBXCLPadlock bracket kit - DBXPLMounting Plate

For incoming connection kit - DBXMP

Accessories for all TP&N Distribution Boards



7

TP&N Distribution Boards

Modular TP&N Distribution Boards

Modular Incomer Options

Service Centre for TP&N

Distribution Boards

TP&N Distibution Boards – with 200A Switch Disconector• Conforms to EN 60439-3• 200A busbars• Neutral and earth terminal for each SP way• IP4X



8 21 811 430 DB208X12 24 918 430 DB212X16 27 1025 430 DB216X20 30 1185 430 DB220X24 33 1292 430 DB224X

Modular TP&N Distribution Boards• Conforms to EN 60439-3• 200A busbars• Neutral and earth terminal for each SP way• IP4X



8 12.0 437 430 DBM08X12 15.5 544 430 DBM12X16 18.5 651 430 DBM16X20 21.5 811 430 DBM20X24 24.5 918 430 DBM24X

Modular 3P and 4P Incoming Options

Current Poles Max Cable Device Kit

Rating (A) (mm2) Cat No Cat No

Switch Disconnector

200 3 70* Y3N3P250D DBY3N200 4 70* Y3N4P250D DBY3NMCCB

160 3 70* Y3N3P160T DBY3N160 4 70* Y3N4P160T DBY3N200 3 70* Y3N3P250T DBY3N200 4 70* Y3N4P250T DBY3N

Cable clamps and shrouds available, please refer to Loadline catalogue.* 150mm2 with cable clamps.All 250A Devices to be set at 200A Max.

Service Centres for all TP&N Distribution Boards• Accepts all DIN rail mounting devices• IP4X• 12 or 24 modular ways



12 (Single row) 5 213 430 DBS12X24 (Double row) 8 427 430 DBS24X

No top or bottom plate supplied with service centre.Removable plate from distribution board is to be utilised.



8

SP&N Distribution Boards• Conforms to EN 60439-3• 125A busbars• Neutral and earth terminal for each SP way• IP4X• 6 - 22 single pole outgoing ways



6 3.8 250 270 DA06X9 4.3 250 323 DA09X12 4.8 250 377 DA12X15 5.3 250 430 DA15X18 6.0 250 484 DA18X22 7.0 250 555 DA22X

Service Centres for SP&N Distribution Boards• Accepts all DIN rail mounting devices• IP4X• 8 - 24 modular ways

Modular Weight Height Width Cat No

Ways (kg) (mm) (mm)

8 3.8 250 270 DAS08X11 4.3 250 323 DAS11X14 4.8 250 377 DAS14X17 5.3 250 430 DAS17X20 6.0 250 484 DAS20X24 7.0 250 555 DAS24X

Incoming Options for SP&N Distribution Boards

Current Sensitivity Poles Max Cable Picture Device

Rating (A) (mA) (mm2) Cat No

Switch Disconnector

100 2 50 1 AV2100125 2 50 1 AV2125RCCB

25 30 2 35 2 LLM25/30/240 30 2 35 2 LLM40/30/263 30 2 35 2 LLM63/30/2100 30 2 35 2 LLM100/30/240 100 2 35 2 LLM40/100/263 100 2 35 2 LLM63/100/2100 100 2 35 2 LLM100/100/263 300 2 35 2 LLM63/300/2Direct Connection

- - - 35 3 DAXD0- - - 70 4 DAXD1

SP&N Distribution Boards

SP&N Distribution Service Centres


1 2

3 4

Accessories

5 6

7 8


Vertical Stacking Kits

(DAS17 to B type board) 5 DAXSKB270mm stacking kit 5 DAXSK08323mm stacking kit 5 DAXSK11377mm stacking kit 5 DAXSK14430mm stacking kit 5 DAXSK17484mm stacking kit 5 DAXSK20555mm stacking kit 5 DAXSK24Terminal Bars

6 way terminal bar 7 DBXT0612 way terminal bar 7 DBXT1218 way terminal bar 7 DBXT1824 way terminal bar 7 DBXT24


Blanking Kits

Busbar terminal blanks (x10) 6 DAXTPEarth Bar Kits

Earth bar 7 DAXEBEarth bar isolation kit 7 DBXLDoor Lock Kits

Cylinder door lock 8 DBXCLPadlock bracket kit 8 DBXPL

Accessories for SP&N Distribution Boards



9

Height

430

427

430

Overall depth with incomer fitted(including dolly) 171mm

Height

430

154

250

Width

111.00

5.00

Dimensions (mm)

Catalogue TP Ways Drawing Height Weight

No No (mm) (kg)

TP&N Standard Distribution Boards without incoming device

DB04X 4 1 544 13DB06X 6 1 598 15DB08X 8 1 651 17DB12X 12 1 758 19DB16X 16 1 865 22DB20X 20 1 1025 25DB24X 24 1 1132 28

Service Centres for TP&N Distribution Boards

DBS12X 12(single row) 1 213 5DBS24X 24(double row) 1 427 8

TP&N Modular Distribution Boards

DBM08X 8 1 437 12DBM12X 12 1 544 15.5DBM16X 16 1 651 18.5DBM20X 20 1 811 21.5DBM24X 24 1 918 24.5


No No (mm) (kg)

Incomer Enclosure for Modular Distribution Boards

DBY3N TP Unit 2 427 8DBY3N 4P Unit 2 427 8


No No (mm) (kg)

TP&N Distribution Boards complete with 200A Switch Disconnector

DB208X 8 3 811 21DB212X 12 3 918 24DB216X 16 3 1025 27DB220X 20 3 1185 30DB224X 24 3 1292 33

Catalogue SP Ways Drawing Width Weight

No No (mm) (kg)

SP&N Distribution Boards

DA06X 6 4 270 3.8DA09X 9 4 323 4.3DA12X 12 4 377 4.8DA15X 15 4 430 5.3DA18X 18 4 484 6DA22X 22 4 555 7

Catalogue Modular Drawing Width Weight

No Ways No (mm) (kg)

Service Centres for SP&N Distribution Boards

DAS08X 8 4 270 3.8DAS11X 11 4 323 4.3DAS14X 14 4 377 4.8DAS17X 17 4 430 5.3DAS20X 20 4 484 6DAS24X 24 4 555 7

1

2

3

4


© T

yco

Ele

ctro

nic

s D

OS

.EP

P L

LXS

11/

03

Tyco Electronics UK, Dorman Smith SwitchgearBlackpool Road, Preston, PR2 2DQ, UKPhone: +44(0) 1772 325 400 Fax: +44(0) 1772 726 276

Energy Division – a pioneer in the development of economical solutions forthe electrical power industry. Our product range includes: Cable accessories, connectors & fittings, electrical equipment, instruments, lighting, insulators &insulation enhancement and surge arresters.

For more information and your country contact person, please visit us at: http://energy.tycoelectronics.com

All of the above information, including drawings, illustrations and graphic designs, reflects our present understanding and is to the best of our knowledge and belief correct and reliable.Users, however, should independently evaluate the suitability of each product for the desired application. Under no circumstances does this constitute an assurance of any particularquality or performance. Such an assurance is only provided in the context of our product specifications or explicit contractual arrangements. Our liability for these products is set forthin our standard terms and conditions of sale. ALR, AMP, AXICOM, B&H, BOWTHORPE EMP, CROMPTON INSTRUMENTS, DORMAN SMITH, DULMISON, GURO, HELLSTERN, LA PRAIRIE, MORLYNN, RAYCHEM, and SIMEL are trademarks.


energy division - red tecnológica mid

Documents