8.8 standard products
TRANSCRIPT
AD 2000 1504814399
ISO9001
IATF16949
ISO14001
OHSAS18001
S DS DS DS D
DEEPAKFASTENERS LIMITED
8.8 Standard Products INR Price List No. DFL-08
Effective 1st Oct 2018
Disclaimer
Limited Warranty And Exclusive Remedy
All information contained in this pricelist has been prepared to assist users in their requirements for Fasteners. The information is based on International Fastener Standards. All such source material and information beyond the control of Deepak Fastener Limited (DFL) is subject to change.
Whilst every care has been taken to ensure that all information and technical data is accurate, DFL will not be liable to any customer that relies on any matter, fact or representation nor will it be liable for any subsequent damage or loss resulting from the use of any information contained in this pricelist. Customers are advised to make their own enquiries or seek independent advice regarding the fitness and suitability of the products listed.
Deepak Fasteners Limited has the right to change the price without any information, if there is a big change in the price of steel or zinc. No guarantee can be given for DFL (hex bolt & nut) products which are plated by users and/or outside plates, who may not have considered hydrogen embrittlement problem. The products listed in this pricelistmight not be stocked at DFL at all times and customers are advised to enquire the availability of the same. E. & O. E.
Deepak Fasteners Limited (DFL) warrants that these products conform to industry standards specified herein and will be free from defects in materials and workmanship. This warranty is expressly given in lieu of any and all other express or implied warranties, including any implied warranty of merchantability or fitness for a particular purpose, and in lieu of any other obligation on our part of DFL will at its option, repair or replace free of charge (excluding all shipping and handling costs) any products which have not been subject to misuse, abuse, or modification and which in its sole determination were not manufactured in compliance with the warranty given above.
The remedy provided herein shall be the exclusive remedy for any breach of warranty or any claim arising in any way out of the manufacture, sale or use of these products. In no event shall Deepak Fasteners be liable for consequential, incidental or any other damages of any nature whatsoever except those specifically provided herein for any breach of warranty or any claim arising in any way of the manufacture, sale or use of these products. No other person is authorised by Deepak Fasteners to give any other warranty, written or oral, pertaining to the products.
Note
Surface Finish : All the products, unless otherwise ordered, are supplied in black thermal finish with a coat of rust preventive oil.
Packing : All products are supplied in standard packing as described in respective price tables. For sizes M6 (1/4) and above 3% extra packing charges will be applicable if the order quantity is less than one carton.
Plating No guarantee can be given for DFL products which are plated by users or by outside plates, : who may not have considered hydrogen embrittlement problem.
Pricing : GST extra as applicable.
1
DEEPAKFASTENERS LIMITED
Toll Free: 1800 102 3911
CE Certification14399 & 15048
The company accepts no responsibility for orders booked by the company's salesman or representatives, till it is confirmed in writing by the company.
All offers for delivery from stocks are subject to goods remaining unsold at the time of receipt of order. For forward delivery, dates are given without any guarantee and no responsibility can be accepted by the company for delay in delivery or failure to deliver due to circumstances beyond the company's control.
When products are forged to customer's drawings and / or specifications , the responsibility to ensure that these do not result in infringement of any patent or trademark will lie entirely with customer concerned and the customer will be solely responsible for the consequence in case of any such infringement.
Wrong dispatches should be notified to the company within 15days from the date of receipt of goods and the Company's consent should be obtained in writing before return of such goods.
The company shall not be responsible for failure or delay in delivering the goods or any part thereof (or any consequential damages) due to acts of God, enemies of the Government of India, wars, revolution, embargo, riots, civil or political disturbances, strikes, lock-outs, stoppages of labour.
Delivery:
Infringement of patent and trade mark:
Order confirmation:
Acceptance and return:
Force Majeure:
Certifications
2Toll Free: 1800 102 3911
NABL ISO/IEC 17025:2005
ISO 9001:2015 IATF 16949
MetricHex Head Bolts / Screws
3
1. Specifications : Generally conforming to IS:1364, ISO:4014, 4017.ISO Metric 6g as per IS per IS:4218.2. Threads :
Property Class 8.8 as per IS:1367.3. Material Mechanical Properties : Grey shaded sizes are fully threaded.4. Note :
Prices for fully threaded screws beyond shaded sizes will cost 10% extra. DFL 8.85. Marking :
No guarantee can given for DFL products which are plated by users or by outside plates, 6. Plating : who may not have considered hydrogen embrittlement problem. 8% will be Charged Extra For Zinc Cr3+Plating
GST extra as applicable.7. Pricing :
Part No. ` Price/100 Pcs
CartonQty
M4
616724616725616727616728616729624809613042613044613045613046794433794434794435794436
204204239239261283283318339381427469512554
1000010000
800070007000500050004500400035003200300028002500
616745616746616748616749616750624810613047613049613050613051613052613053794437794438794439794440794441
213213251251273296296333378442491536605654730781834
616767616768616770616771616772616773616774613054613055613056613057613058613059613060624811624812624813624814794442794443794444794445794446794447794448
15001500150015001500100010001000
800700700700600500500500500400400400300300250250250250200200200
M5 M6 M8
60006000500045004000350030003000250024002000200015001500150015001500
171185215229243258278337382429472514561602653703753803956
1,0611,6321,7661,9012,0412,169
40003800300030003000250025002000150015001500150010001000100010001000
800800800700600600500500
616815616817616818616819616820616821616823613070613071613072613073613074613075613076613077613078613079624815624816561206794449794450794451794452794453794454794455794456794457
353400420442464499559654730799871928
1,0021,0731,1451,2131,2841,4441,6482,3502,8713,0833,4413,6963,9294,1634,3964,6294,862
Length
Dia
10121618202225303540455055606570758090
100110120130140150160170180190200
Part No. ` Price/100 Pcs
CartonQty Part No. ` Price/
100 Pcs Carton
Qty Part No. ` Price/100 Pcs
CartonQty
DEEPAKFASTENERS LIMITED
Toll Free: 1800 102 3911
- All material is bulk packed - Minimum order quantity is one carton for each size.
MetricHex Head Bolts / Screws
4
1. Specifications : Generally conforming to IS:1364, ISO:4014, 4017. ISO Metric 6g as per IS per IS:4218.2. Threads :
Property Class 8.8 as per IS:1367.3. Material Mechanical Properties : Sizes in brackets are non-preferred standard. Grey shaded sizes are fully threaded.4. Note :
Prices for fully threaded screws beyond shaded sizes will cost 10% extra. DFL 8.85. Marking :
No guarantee can given for DFL products which are plated by users or by outside plates, 6. Plating : who may not have considered hydrogen embrittlement problem. 8% will be Charged Extra For Zinc Cr3+Plating
GST extra as applicable.7. Pricing :
M10
616844616845616846616847616848616850616851613080613081613082613083613084613085613086613087613088613090613092624817624818624819624820624821794458794459794460
M12 (M14) M16
1618202225303540455055606570758090100110120130140150160180200220240260280300
718757764799852944
1,0321,2591,3681,4801,5751,6881,8001,9112,0232,1342,3562,5794,0884,2614,5814,9045,2286,0956,7887,483
1000700700700700600600500400400400400300300300250250250200200200200150150150150
616876-
616878616880616881616882613093613094613095613096613097613098613099613100613102613104613105613106624823624824624825624826624828624830624831624832624833 624834794424
1,161
1,2781,3571,4871,6161,9302,0912,2532,4122,5292,6892,8463,0083,3243,6343,9224,4914,8335,2185,5625,9346,6757,7628,5399,314
10,46411,26812,014
500
500400400400300300250250200200200200200150150150150100100100100
757575755050
616907616909616910616911616912613107613108613109613110613111613112613113613115613117613118613119613120613121624835624836624838791593791595791597791599791601791603
1,9062,0822,2622,4442,6242,9513,1693,3863,5553,7783,9944,2104,5715,0025,6596,1466,5206,9327,3457,8349,234
11,46612,49513,55814,62215,68516,748
300300250250200200200200150150150150150100100100100
75757575505050505050
616935616937616938616939616940616941613122613123613124613125613126613127613129613131613132613133613134613135613136613137624841624843624844624845624846624847624848
2,8562,7683,0063,2463,4963,7064,1384,4264,7145,0025,2905,5786,1536,6927,2697,8458,6199,2209,818
10,50011,70813,47814,74116,00217,26318,52519,786
250200200200200150150150150100100100100
7575757575505050505050505050
Dia
Part No. ` Price/100 Pcs
CartonQtyLength Part No. ` Price/
100 Pcs Carton
Qty Part No. ` Price/100 Pcs
CartonQty Part No. ` Price/
100 Pcs Carton
Qty
DEEPAKFASTENERS LIMITED
Toll Free: 1800 102 3911
- All material is bulk packed - Minimum order quantity is one carton for each size.
1. Specifications : Generally conforming to IS:1364, ISO:4014, 4017. ISO Metric 6g as per IS per IS:4218.2. Threads :
Property Class 8.8 as per IS:1367.3. Material Mechanical Properties : Sizes in brackets are non-preferred standard. Grey shaded sizes are fully threaded.4. Note :
Prices for fully threaded screws beyond shaded sizes will cost 10% extra. DFL 8.85. Marking :
No guarantee can given for DFL products which are plated by users or by outside plates, 6. Plating : who may not have considered hydrogen embrittlement problem. 8% will be Charged Extra For Zinc Cr3+Plating
GST extra as applicable.7. Pricing :
40455055606570758090100110120130140150160180200220240260280300
(M18) M20 (M22)
616965616966616967616968624849613138613139613140613141613143613145613146613147613148613149613150613151613153624851794425794426794427794428794429
4,3184,6064,8945,2185,8656,1536,5136,8727,1987,9168,6389,356
10,07711,09211,84312,59013,23515,60717,26318,76020,33621,91323,48925,066
150150100100100100
757575757550505050505050505050502525
616996616997616998616999617000613154613155613156613157613159613161613162613163613164613165613166613167613169613171624854624855624857624858624859
5,5785,9386,3346,6927,0537,8818,3118,7449,176
10,04210,90311,76812,63014,04414,91415,68916,51319,46921,44223,41125,38127,35329,32431,293
100100
75757575757550505050505050505050502525252020
617029617030617031617032613172613173613174613176613178613179613180613181613182613183613184613186613188613189624860624861624862791643
7,8818,3498,7819,250
10,11210,65111,19112,27013,31514,63315,72916,46017,55918,88519,99622,21624,92929,16431,81734,46937,12039,044
75757550505050505050505050505025252020202015
Dia
MetricHex Head Bolts / Screws
5
Part No. ` Price/100 Pcs
CartonQtyLength Part No. ` Price/
100 Pcs Carton
Qty Part No. ` Price/100 Pcs
CartonQty
DEEPAKFASTENERS LIMITED
Toll Free: 1800 102 3911
- All material is bulk packed- Minimum order quantity is one carton for each size.
1. Specifications : Generally conforming to IS:1364, ISO:4014, 4017. ISO Metric 6g as per IS per IS:4218.2. Threads :
Property Class 8.8 as per IS:1367.3. Material Mechanical Properties : Sizes in brackets are non-preferred standard. Grey shaded sizes are fully threaded.4. Note :
Prices for fully threaded screws beyond shaded sizes will cost 10% extra. * Long Delivery Items - Subject to extended deliveries (3 to 4 months) Users are advised to plan their requirements in advance.
DFL 8.85. Marking : No guarantee can given for DFL products which are plated by users or by outside plates, 6. Plating :
who may not have considered hydrogen embrittlement problem. 8% will be Charged Extra For Zinc Cr3+Plating
GST extra as applicable.7. Pricing :
MetricHex Head Bolts / Screws
6
5055606570758090100110120130140150160180200220240260280300
M24 (M27)* M30*
617060617061617062617063617064617065613190613192613194613195613196613197613198613199613200613202613204613205613206624869624870624871
10,52211,09911,67512,25112,82713,14314,80616,16517,52618,88620,20821,15122,47323,79625,11827,76131,72735,24137,87440,50743,14045,772
50505050505050505050505025252520202015151515
617088617089617090617091617092617093617094617096613209613210613211613212613213613214613215613217613219613220613221613222624873624874
15,87316,73217,51318,31319,11419,91420,71422,35725,38727,36729,26130,31432,20734,10236,41939,78743,36547,57551,36555,15359,36363,574
50505050505050502525252020202015151515151510
617112617113617114617115617116617117617118617120613225613226613227613228613229613230613231613233613235613236613237613238613239613240
20,88221,85122,86223,83024,83925,85026,81828,84032,29234,65037,05038,73341,04943,36545,68250,52355,15359,78564,41669,04873,68078,310
50505050252525202020202015151515101010101010
Dia
Part No. ` Price/100 Pcs
CartonQtyLength
DEEPAKFASTENERS LIMITED
Toll Free: 1800 102 3911
Part No. ` Price/100 Pcs
CartonQty Part No. ` Price/
100 Pcs Carton
Qty
- All material is bulk packed - Minimum order quantity is one carton for each size.
1. Specifications : Generally conforming to IS:1364, ISO:4014, 4017. ISO Metric 6g as per IS per IS:4218.2. Threads :
Property Class 8.8 as per IS:1367.3. Material Mechanical Properties :Sizes in brackets are non-preferred standard. Grey shaded sizes are fully threaded.4. Note :
Prices for fully threaded screws beyond shaded sizes will cost 10% extra. * Long Delivery Items - Subject to extended deliveries (3 to 4 months) Users are advised to plan their requirements in advance.
DFL 8.85. Marking : No guarantee can given for DFL products which are plated by users or by outside plates, 6. Plating :
who may not have considered hydrogen embrittlement problem. 8% will be Charged Extra For Zinc Cr3+Plating
GST extra as applicable.7. Pricing :
758090100110120130140150160180200220240260280300
(M33)* M36* M42*
617141617142617144617146613242613243613244613245613246613247613249613251613252613253613254613255613256
202020201515151510101010101010
88
617166617168617170613257613258613259613260613261613262613264613266613267613268613269613270613271
1515151510101010101010
88855
617215617217617218617219613286613287613288613289613291613293613294613295613296613297613298
101010101010
885555555
Dia
MetricHex Head Bolts / Screws
7
Part No. ` Price/100 Pcs
CartonQtyLength Part No. ` Price/
100 Pcs Carton
Qty Part No. ` Price/100 Pcs
CartonQty
DEEPAKFASTENERS LIMITED
Toll Free: 1800 102 3911
- All material is bulk packed - Minimum order quantity is one carton for each size.
M48
617263617264617265617266613312613313613314613316613318613319613320613321613322613323
117,751124,222124,952130,158145,398151,978158,604171,808178,051226,323241,404256,485271,566286,647
101010101010
885555555
Part No. ` Price/100 Pcs
CartonQty
32,62933,93436,46138,73342,94445,89148,41751,36554,31156,83862,31267,78573,68079,15285,04690,51996,412
41,68044,62947,99652,20655,57558,52261,88965,25868,62675,36282,09988,83595,570
102,307109,043115,779
80,07084,67189,29889,98693,78699,005
104,213109,428119,368124,768160,040171,918183,833195,725207,609
1. Specifications : Generally conforming to IS:1364, ISO:4032. ISO Metric 6H as per IS:4218, ISO:261, ISO:965.2. Threads :
Property Class 8 as per 3. Material and Mechanical Properties : IS:1367, ISO:898 Part-II.
Sizes in brackets are non-preferred non-standard sizes.4. Note : M6 to M42 Marking will be DFL 8.5. Marking :
No guarantee can given for DFL products which are plated by users or by outside plates, 6. Plating : who may not have considered hydrogen embrittlement problem. 8% will be Charged Extra For Zinc Cr3+Plating
GST extra as applicable.7. Pricing :
623196623197623198623200787925623201623202787926624890623203787927623204624891623205624892623206623207623208623209623210623211623212623214623216
2000014000
600030001500150010001000
700700500500300300250250200150100
7550502525
M4 x 0.70M5 x 0.80
M6 x 1M8 x 1.25
(M10) x 1.25M10 x 1.5
M12 x 1.75(M12) x 1.5(M14) x 1.5
M14 x 2(M16) x 1.5
M16 x 2(M18) x 1.5M18 x 2.5
(M20) x 1.5M20 x 2.5
(M22) x 2.5M24 x 3
(M27) x 3M30 x 3.5
(M33) x 3.5M36 x 4
M42 x 4.5M48 X5
Diameter Part No. CartonQty
MetricHex Nuts
8
` Price/100 Pcs
DEEPAKFASTENERS LIMITED
Toll Free: 1800 102 3911
- All material is bulk packed - Minimum order quantity is one carton for each size.
365194
184414393580607950906
1,2371,1782,0711,9722,7002,5723,1544,3957,527
10,48514,21419,42032,14144,186
1. Specifications : Generally conforming to IS : 2016 No guarantee can given for DFL products which are plated by users or by outside plates, who may not have 2. Plating :
considered hydrogen embrittlement problem. 8% will be Charged Extra For Zinc Cr3+Plating
GST extra as applicable.3. Pricing :
Specialized Coatings
4mm5mm6mm8mm
10mm12mm14mm16mm18mm20mm22mm24mm27mm30mm33mm36mm42mm48mm
500003500015000
90004500300020001500150010001000
500400400250200100100
787853787854787855787856628850561034787857561035561051561030561033561036561031561032561037561038561040561042
Diameter Part No. ` Price/100 Pcs
CartonQty
MetricPlain Washer
9
DEEPAKFASTENERS LIMITED
The product's life and quality is measured not only by its grades and standards but
also by its finish, which prevents it from rusting and adds strength to the material.
Deepak Fasteners offers a wide range of generic and proprietary
coating to meet exacting customer requirements. In-house
capability includes Zinc / Zinc-Nickel Electroplating, Geomet,
Mechanical Galvanizing, Delta Dorken, Hot Dip Galvanizing,
PTFE, Unbrako Wiscoat.
Toll Free: 1800 102 3911
- All material is bulk packed - Minimum order quantity is one carton for each size.
26335587
161288396503655767815
1,4381,8842,3863,3554,0968,149
17,040
Direct Tension Indicator
The UNBRAKO Arc Welding Stud also known as shear connector is used in the construction of tall
buildings, bridges and steel structures. The drawn-arc process produces a full cross-sectional weld
forming a bond that is greater than the surrounding material. It improves the strength of the structure.
Product Range : Metric: M13, M16, M19, M22, M25 – Any Length
Inch: 1/2”, 5/8”, 3/4", 7/8”, 1” – Any Length
UNBRAKO Direct Tension Indicator also known as Auto Torque Indicator, are single-use mechanical load cells designed to indicate the magnitude of
preload in the assembly. It shows if the bolt is properly tensioned, very useful while tensioning
High Strength Structural Bolts.
Product Range : Metric: M16 – M36 as per BS EN 14399-9 Unbrako Feeler Gauge is available to check if the required torque is achieved.
Tension Control Structural Bolt
Unbrako Electric
Shear Wrench
Product Range : Metric: M12 – M30 (any length) – As Per BS EN 14399 - 10
Unbrako Electric Shear Wrench is also Available.
Tension Control Structural Bolt is an easy to install Heavy Duty Bolt used in Steel Frame Construction.
It has its own built-in torque control device. The outer socket of wrench rotates the nut until the
torque control groove in the spline shears off, thereby achieving proper bolt tension.
Rebar CouplerUnbrako Rebar Coupler Systems, also known as
Reinforcing bar couplers or coupler splicing connection, is a threaded sleeve that guarantees an ultimate tensile
strength of the splice (joint) greater than that of the parent bar. Coupler splicing system is suitable for
joining reinforcement bars end to end.
Product Range : Metric: 13mm to 57mm Bar Diameter
As per ASTM A615, ASTM A706, ASTM A775, ACI 318, ACI 349,A.A.S.H.T.O and UBC 1997.
Prices available on request. Contact Unbrako for further detail.
Unbrako provides complete equipment for bar-end preparation on site.
Download the Free Unbrako Fastener App for iPhone & Android at : www.unbrako.com
Arc Welding Stud
THE WORLD LEADER
Construction Fasteners