counterflow-plate heat exchanger type gs · pdf fileen high efficiency – in aluminium,...
TRANSCRIPT
EN
High efficiency – in Aluminium, PET or with Epoxy coatingCounterflow-Plate Heat Exchanger Type GS
GS EN 1017Klingenburg GmbH • Boystrasse 115 • D-45968 Gladbeck / Germany
Phone: +49-(0) 20 43-96 36 0 • Fax: +49-(0) 20 43-7 23 62 • E-mail: [email protected] www.klingenburg.de
Rotary Heat Exchanger - Execution as aluminum,
epoxy, enthalpy or sorption rotor
- High Temperature Rotor made of stainless steel
Crossflow- Plate Heat Exchanger
- Aluminium, PET, epoxy and stainless steel versions available
Counterflow- Plate Heat Exchanger - Aluminium, PET and epoxy
versions available- Highest efficiency
Air is our element
energy recovery our passionAir is our element
energy recovery our passion
21 mm
F
246 mm
A
B
E
Cmax width
single
module
DimensionsType
A[mm]
B[mm]
max widthsingle module
[mm]
C[mm]
E[mm]
F[mm]
max pres-sure loss
[Pa]
GS 16 380 155 430 individual 95 81 120
GS 18 397 172 430 individual 107 93 120
GS 25 454 230 750 individual 148 134 120
GS 30 496 271 710 individual 177 163 130
GS 35 537 312 800 individual 206 193 145
GS 45 619 394 720 individual 264 249 150
GS 62 758 534 700 individual 362 347 170
GS 80 899 674 600 individual 462 447 200
GS 95 1040 815 600 individual 562 547 260
GS 110 1182 959 600 individual 662 648 280
Because of well known advantages, the Exchangers were made of seawater resistant aluminium right from the start. For an even higher degree of corrosion protection alternatively all GS models are also available with epoxy coating.
Tightness, hygiene, form stability and long product life circles are the main principles behind the development of the Klingenburg Counterflow Heat Ex-changers. As the requirements and challenges of the Heat
Exchanger increases with the air volume, the plates of the GS 80,
the GS 95 and of the big brother GS 110 are equipped
with a double folded edge on the supply and
return face side which re-sults in five times the material
thickness at the folded edge.
This ensures strength, reliability and trust
Klingenburg Products set repeatedly new standards in the market. With our in-house machine technology and development depart-ment you can be assured that we work for your flexibility, today and tomor-row. Profit from new technology which becomes an essential part of your Air conditioning unit.
The high efficiencies of the GS ex-changer have been confirmed with many tests. Leading air conditioning manufacturers have certified their units using our GS exchanger.
Compatibility
The GS range of exchangers are com-patible with the standard crossflow exchangers. These combi-exchangers are used when the application needs higher air volumes.
With this combination, the volume flow rate can be dou-bled with the same installation depth.
The double folding principle of the larger sizes, ensures stability and strength
Principle of combi-exchangers
Technical changes possible
DATAGS- K
D
A
B
E
21 mm
C
Technical changes possible
Klingenburg Plastic Counterflow-Plate Heat Exchanger
Available in 6 sizes: GS-K 18 GS-K 25 GS-K 30 GS-K 35 GS-K 45 GS-K 366variable package width (c) available according to customer specifications.
Casing sheets aluminium
Plate material PET Operation conditions -20°C up to +70°C Appropriate for food contact Hygenically tested and microbial inert according
DIN EN ISO 846
Latest welding technology grant highest tightness of the plates
Sealing material hygienically tested and microbial inert accord-ing DIN EN ISO 846
Fire classification B2 according DIN 4102 T1 by DMT
GSAluminium Counterflow heat exchanger
GS 62
GS 25 GS 30 GS 35 GS 45
GS 18
GS 110GS 95
GS 80
GS 16
Klingenburg Aluminium Counterflow Heat Exchanger With already ten sizes, we offer the largest range of Counterflow Plate Heat Exchangers on the market.In between the smallest model GS 16 from 20 m³/h
(with a unit width of 100 mm), and the biggest model GS 110 up to 2000 m³/h (with a unit width of 500 mm) all requirements of the international markets can be met.
Range GSN° 05.03.243
Layout diagram
Unit
widt
h [m
m]
with condensation
without condensation
Tem
pera
ture
effi
cien
cy [%
]Pr
essu
re d
rop
[Pa]
Air v
olum
e [m
3 /h]
This diagram applies to supply and exhaust air mass flows equal
F Dimensions
TypeA
[mm]B
[mm]C
[mm]D
[mm] E
[mm] F
[mm]
GS-K 18 397 172 individual 93 108 246
GS-K 25 454 230 individual 134 148 246
GS-K 30 496 271 individual 163 177 246
GS-K 35 537 312 individual 193 206 246
GS-K 45 619 394 individual 249 264 246
GS-K 366 366 366 individual 178 194 194
GS - K Plastic Counterflow-Plate Heat Exchanger
Air is our element
energy recovery our passion
21 mm
F
246 mm
A
B
E
Cmax width
single
module
DimensionsType
A[mm]
B[mm]
max widthsingle module
[mm]
C[mm]
E[mm]
F[mm]
max pres-sure loss
[Pa]
GS 16 380 155 430 individual 95 81 120
GS 18 397 172 430 individual 107 93 120
GS 25 454 230 750 individual 148 134 120
GS 30 496 271 710 individual 177 163 130
GS 35 537 312 800 individual 206 193 145
GS 45 619 394 720 individual 264 249 150
GS 62 758 534 700 individual 362 347 170
GS 80 899 674 600 individual 462 447 200
GS 95 1040 815 600 individual 562 547 260
GS 110 1182 959 600 individual 662 648 280
Because of well known advantages, the Exchangers were made of seawater resistant aluminium right from the start. For an even higher degree of corrosion protection alternatively all GS models are also available with epoxy coating.
Tightness, hygiene, form stability and long product life circles are the main principles behind the development of the Klingenburg Counterflow Heat Ex-changers. As the requirements and challenges of the Heat
Exchanger increases with the air volume, the plates of the GS 80,
the GS 95 and of the big brother GS 110 are equipped
with a double folded edge on the supply and
return face side which re-sults in five times the material
thickness at the folded edge.
This ensures strength, reliability and trust
Klingenburg Products set repeatedly new standards in the market. With our in-house machine technology and development depart-ment you can be assured that we work for your flexibility, today and tomor-row. Profit from new technology which becomes an essential part of your Air conditioning unit.
The high efficiencies of the GS ex-changer have been confirmed with many tests. Leading air conditioning manufacturers have certified their units using our GS exchanger.
Compatibility
The GS range of exchangers are com-patible with the standard crossflow exchangers. These combi-exchangers are used when the application needs higher air volumes.
With this combination, the volume flow rate can be dou-bled with the same installation depth.
The double folding principle of the larger sizes, ensures stability and strength
Principle of combi-exchangers
Technical changes possible
DATAGS- K
D
A
B
E
21 mm
C
Technical changes possible
Klingenburg Plastic Counterflow-Plate Heat Exchanger
Available in 6 sizes: GS-K 18 GS-K 25 GS-K 30 GS-K 35 GS-K 45 GS-K 366variable package width (c) available according to customer specifications.
Casing sheets aluminium
Plate material PET Operation conditions -20°C up to +70°C Appropriate for food contact Hygenically tested and microbial inert according
DIN EN ISO 846
Latest welding technology grant highest tightness of the plates
Sealing material hygienically tested and microbial inert accord-ing DIN EN ISO 846
Fire classification B2 according DIN 4102 T1 by DMT
GSAluminium Counterflow heat exchanger
GS 62
GS 25 GS 30 GS 35 GS 45
GS 18
GS 110GS 95
GS 80
GS 16
Klingenburg Aluminium Counterflow Heat Exchanger With already ten sizes, we offer the largest range of Counterflow Plate Heat Exchangers on the market.In between the smallest model GS 16 from 20 m³/h
(with a unit width of 100 mm), and the biggest model GS 110 up to 2000 m³/h (with a unit width of 500 mm) all requirements of the international markets can be met.
Range GSN° 05.03.243
Layout diagram
Unit
widt
h [m
m]
with condensation
without condensation
Tem
pera
ture
effi
cien
cy [%
]Pr
essu
re d
rop
[Pa]
Air v
olum
e [m
3 /h]
This diagram applies to supply and exhaust air mass flows equal
F Dimensions
TypeA
[mm]B
[mm]C
[mm]D
[mm] E
[mm] F
[mm]
GS-K 18 397 172 individual 93 108 246
GS-K 25 454 230 individual 134 148 246
GS-K 30 496 271 individual 163 177 246
GS-K 35 537 312 individual 193 206 246
GS-K 45 619 394 individual 249 264 246
GS-K 366 366 366 individual 178 194 194
GS - K Plastic Counterflow-Plate Heat Exchanger
Air is our element
energy recovery our passion
EN
High efficiency – in Aluminium, PET or with Epoxy coatingCounterflow-Plate Heat Exchanger Type GS
GS EN 1017Klingenburg GmbH • Boystrasse 115 • D-45968 Gladbeck / Germany
Phone: +49-(0) 20 43-96 36 0 • Fax: +49-(0) 20 43-7 23 62 • E-mail: [email protected] www.klingenburg.de
Rotary Heat Exchanger - Execution as aluminum,
epoxy, enthalpy or sorption rotor
- High Temperature Rotor made of stainless steel
Crossflow- Plate Heat Exchanger
- Aluminium, PET, epoxy and stainless steel versions available
Counterflow- Plate Heat Exchanger - Aluminium, PET and epoxy
versions available- Highest efficiency
Air is our element
energy recovery our passionAir is our element
energy recovery our passion