controlware brochure1
DESCRIPTION
ÂTRANSCRIPT
Controlware Access Backup Solutions
The IBS Picco represents Controlware’s new generation of backup products. The IBS Picco is ideally suited for backup applications in a wide range of network scenarios with backup data rates ranging from 64 Kbit/s up to 2.048 Mbit/s. Features such as remote management and configuration via software download, integrated SNMP agent and Ethernet interface make the IBS Picco the ideal equipment for backing up dedicated leased lines in Wide Area Networks (WANs).
By using dial up ISDN, the IBS Picco ensures the availability of wide area networks. This is achieved automatically and cost effectively. The IBS Picco can be fully integrated into Controlware’s TAXI Manager network management systems, as well as into the umbrella network management systems Tivoli NetView and HP OpenView. The device can, in fact, be easily integrated into any network management system, which supports the SNMP V1 standard.
Controlware Access Backup Solutions
IBS Picco
Introduction
Controlware Access Backup Solutions
IBS Picco
BackupThe IBS Picco ensures the availability of important links and vital applications. As soon as the leased line fails, the IBS Picco immediately establishes a backup path via ISDN at speeds ranging from 64 Kbit/s up to 1.920 Mbit/s.
The IBS PICCO constantly monitors the leased line and is protocol transparent. Thus, no protocol-dependent configuration or topology and routing changes are necessary. Full bandwidth of the leased line is available as no data is used by the IBS Picco for monitoring.
The IBS Picco automatically detects a failure of the leased line using a combination of various call criteria and establishes an alternate connection via ISDN. When a backup is in progress, the IBS Picco continues to monitor the leased line, thus ensuring that recovery from a backup is also automatic.
Disaster RecoveryThe IBS Picco provides backup and disaster recovery within the same unit. For example, if it is not possible to establish a connection between the two sites being monitored, the IBS Picco automatically dials alternate locations (e.g. a backup computing centre).
Local and Remote Software DownloadThe operating software of the IBS Picco or parts of it can be downloaded to any remotely installed device without requiring the presence of service personnel. A download of the IBS Picco operating software or parts of it can be carried
out locally via a serial interface and remotely via the ISDN network or IP based via the Ethernet Interface. Two complete software versions can be stored in the internal FLASH.
Multiple ISDN ProtocolsThe IBS Picco allows the integration of different ISDN protocols into a single operating software. Corporations with global networks only need one product revision as the ISDN protocol can be selected via configuration parameters.
Variable ISDN InterfacesThe IBS Picco is available with various ISDN interfaces. Depending on the requirements users can select modules equipped with one or more ISDN BRI S or U interfaces, one ISDN PRI interface for E1 lines and one ISDN PRI interface for T1 lines.
Automatic ISDN Line VerificationIn order to ensure the availability of the ISDN path, an ISDN line verification test checks automatically the availability of the ISDN network. The ISDN connection awaiting backup simply remains idle. During this time, failures of the ISDN path itself may go unnoticed. In order to provide an early warning of impending ISDN problems, the IBS Picco conducts a simulated backup at regular intervals. Test data is exchanged, but the data stream is not actually switched over. Any connecting problems are forwarded to the network manager and are also stored in local log files.
Features
Leased Line
ISDN
BRI/PRI BRI/PRIIBS Picco IBS Picco
Modem Modem
Controlware Access Backup Solutions
IBS Picco
Inband Communication andAccess SecurityThe IBS Picco provides access protection by checking the calling party identification number. More than 96 valid access numbers may be defined. In addition, each unit may be assigned a password, which is exchanged inband in each B-channel during connection set-up. This function is especially important for international connections, as ISDN gateways often delete all calling party information, thereby rendering all other access protection schemes useless.
BONDING CompliantChannel aggregation takes place in accordance with the Bandwidth ON Demand Interoperability Group Mode 1 de facto standard.
TAXI-System CompatibilityThe IBS Picco is fully compatible to Controlware’s TAXI-System and may thus be connected using a primary rate interface and the DBB Module for X.21 or V.35 applications or the Quad E1/T1 Module in conjunction with the IMX Module for G.703/4 applications. This is useful in star points where several IBS Picco connect into one central TAXI-System.
Multiple Time WindowsThe IBS Picco uses programmable time windows to allow backup operation during user specified times. This feature prevents ISDN call charges being accrued during periods when data transfer is not vital.
Remote SupervisorThe IBS Picco features an easy-to-use supervisor port, which can also be accessed remotely via ISDN. With Controlware offering fully compatible remote supervisory access for all units, an IBS Picco may be accessed via another IBS Picco or the TAXI-System. The three-level password protection scheme, the command file editor and the online help facilities are uniformly available in all Controlware ISDN products.
User-friendly Windows BasedConfiguration ManagerWith the IBS Picco, Controlware introduces a new configuration manager, which allows the user to configure the IBS Picco via a Windows based userfriendly software module.
Features
Frame Relay
Frame RelaySwitch
TAXI-System
ChannelBank
E1 or T1
E1 or T1
ModemIBS Picco
64 - 1920 Kbit/s
Multi
ple P
RI/B
RI
ISDN
Controlware Access Backup Solutions
IBS Picco
Integrated SNMP Agent
The integrated SNMP agent supports the standard MIB II
and the Controlware specific ISDN MIB. All configuration
parameters as well as all alarm and status messages are
supported via the integrated SNMP agent. The IBS Picco can
thus be integrated into every SNMP network management
platform. As a communication interface, either the optional
Ethernet interface or the SLIP (serial line IP) port can be
used.
Network Management
The IBS PICCO can be managed remotely together with
the TAXI-System and IDB dial-backup adapters using
Controlware’s network management system TAXI Manager,
which runs on standard umbrella NMS platforms such as
HP OpenView or Tivoli NetView. The TAXI Manager enables
convenient configuration and monitoring of all TAXI-System
applications. Access to the NMS can be supported via ISDN,
serial line IP (SLIP) and via Ethernet. The standard IP addressing
allows for full integration of the NMS data with any existing
IP network.
Features
Configuration Manager
IBS Picco units are:64/128 inclusive X.21, V.24 or V.35 �128/512 inclusive X.21, V.24 or V.35 �1920 inclusive X.21, V.24 or V.35 �
For more information refer to Network Management literature.
VideoMonitor
Frame RelaySwitch
Multi
ple P
RI/B
RI
IBS Picco Frame RelaySwitch
Video Camera
ISDN
64 - 1920 Kbit/s
X.21, V.24, V.35
E1, T1,
X.21, V.35
X.21, V.24, V.35
Controlware Access Backup Solutions
IBS Picco
IBS Picco Versions
Max. Modules with ISDNBackup Speed Interfaces (Examples)
64 Kbit/s 1 BRI128 Kbit/s 1 BRI256 Kbit/s 1 Dual BRI or 2 BRI384 Kbit/s 1 Quad BRI512 Kbit/s 1 PRI (E1/T1) or 1 Quad BRI
1.472 Kbit/s 1 PRI T11.920 Kbit/s 1 PRI E1
ApplicationsAutomatic backup applications with disaster recovery �Terminal Adapter applications �
General FeaturesEasy customisation to actual and future �
customer bandwidth requirements through modular design and variable ISDN interfaces respectively
Worldwide implementation through multiple ISDN �protocols in one unit and worldwide approvals
Network Management Software for worldwide central or �distributed management
Remote configuration with user-friendly configuration �software
Full integration into umbrella network management �platforms HP OpenView and Tivoli NetView
Access security through inband communication, �identification of calling party and three-level password
Remote download of software into IBS units �Integrated SNMP agent �
Backup FeaturesSurveillance of leased lines up to 1920 using X.21, V.24, �
V.35 interfacesReliable detection of leased line failures by combining �
various call criteriaAutomatic detection of pending ISDN service problems �
through ISDN line testTemporary replacement of defective leased line using �
ISDN speeds up to 1.920 Kbit/s (IBS)Routing or topology changes not necessary (transparent �
monitoring of leased line)Multiple time windows for avoiding unnecessary �
backupsReliable switchback of data using a leased line test �No interruption of leased line upon power failure of IBS �
(Data is bridged using Relay SICs)Ethernet Bridging �Call button �Rack option �
Features
Controlware Access Backup Solutions
IBS Picco
Application SpeedLeased line monitoring Leased line speed from 64 Kbit/s – 2.048 Mbit/s �ISDN backup speed of IBS Picco Maximum ISDN speed up to 1920 Kbit/s �
ISDN InterfacesISDN modules ISDN BRI (S or U interface) 2 x 64 Kbit/s �
ISDN QBRI-S 1 Port 2 x 64 Kbit/s ISDN Dual BRI-S 4 x 64 Kbit/s ISDN Quad BRI-S 8 x 64 Kbit/s ISDN PRI (E1) 30 x 64 Kbit/s ISDN PRI (T1) 23 x 64 Kbit/s
D-channel protocol ETSI CE (NET 3), ATT 5ESS5, ATT 5ESS9, ATT 5ESS10, NORTHERN TELECOM DMS 100 � US National ISDN 2, NTT Japan, Kokusai Denshin Denwa, Hong Kong Telephone Korean OP, Australian Telecom 1, ECMA/QSIG
Leased Line (DTE/DCE) InterfacesLeased line data rates 64 Kbit/s – 2.048 Mbit/s �
Electrical interfaces X.21 V.24 V.35
Failsafe option Relay SICs (No interruption of leased line upon power failure of IBS Picco as data is � bridged between DTE and DCE)
Protocol Independence e.g. TCP/IP, Frame Relay, SNA, X.25
BONDING Compliant Bandwidth on Demand interoperability Mode 1 Backup Features
ISDN line test None, daily, weekly, monthly �Modem test Via “BERT“ test pattern (Mark, Space, 511, 2047, 1:3) �Multiple time windows Up to 10 time windows �Compatibility Fully compatible to TAXI-System (DBB, Quad E1/T1, IMX, DBU) and IDB-64 �
Security FeaturesISDN number validation Check of incoming ISDN number �ISDN inband passwords Check of submitted password of unit accessing via ISDN � Administration password 3-level supervisor passwords
Network ManagementConfiguration and alarm User friendly Windows software, Locally via SLIP, �indication (traps) Remotely via ISDN or Ethernet to central NMS-PC or UNIX NMD
Management station Controlware TAXI Manager for Tivoli NetView or HP OpenView, �SNMP V1 SNMP agent integrated ISDN num �
Power RequirementsVoltage range 115 V AC – 230 V AC, (Autorange) �Line frequency 50 – 60 Hz �Input current 1 A �
Physical and Environmental SpecificationsDimensions (H x W x D) 44 mm x 285 mm x 440 mm (1.73 X 11.2 X 17.3 inch) �Weight 7 kg (15.43 pound) �Operation temperature + 5 °C to + 40 °C (+ 41 °F to + 104 °F) �Storage temperature - 10 °C to 60 °C (+ 14 °F to + 140 °F) �Humidity max. 90 % (non-condensing) �
Compliance
Technical Specifications
HeadquartersControlware GmbH Waldstrasse 92 63128 Dietzenbach Germany
Tel: +49 (0) 6074 858 00 Fax: +49 (0) 6074 858 191 Email: [email protected] Web: www.controlware.com
UK:Tel: + 44 (0) 1635 584500 Email: [email protected]
Benelux:Tel: +32 (0) 2 712 02 00 Email: [email protected]
France:Tel: +33 (0) 1 610 610 60 Email: [email protected]
Australia:Tel: +61 (0) 2 9765 8222 Email: [email protected]
United States:Tel: +1 732 919 0400 Email: [email protected]
Italy:Tel: +39 02 48559421 Email: [email protected]
Spain:Tel: +34 (0) 61 95 87 200 Email: [email protected]
Austria:Tel: +43 127574 4228 Email: [email protected]
About ControlwareControlware Communications Systems are leading specialist suppliers, value added distributors and manufacturer of network backup solutions. With extensive experience in communications networking and delivery of IP solutions, technical expertise enables Controlware to not only supply products but also assist with development, design, integration, and support.
The Controlware group has provided IT communications networking solutions since 1980. During this time Controlware has accumulated extensive experience in the design, delivery and maintenance of cost-effective IP networks. By also specializing in the integration of applications such as Communication, IT Security, IT-Management and Application Delivery Controlware offers a range of turnkey solutions that can be uniquely customized to exact requirements. With expert local technical teams backed up by global Technical Assistance Centers Controlware ensures 24x7x365 coverage for customers from International offices in Europe, North America, and Australia.
Controlware is an Affiliate Member of the IP UserGroup™ The IP UserGroup™ is an independent security technology forum representing a community of individuals who are interested in the development and adoption of IP (Internet Protocol) based products and services for use within networked security and intelligent building applications.
All specifications are subject to change without notice. Every effort has been made to supply complete and accurate information herein. © 2008 by Controlware GmbH. All rights reserved.
Ref. N°: CWP/MK/RL 04/2008
PArtner AddreSS detAIlS
Affiliate member
www.controlware.com