characterization of polymer
TRANSCRIPT
![Page 1: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/1.jpg)
1
A SEMINAR ON A SEMINAR ON Characterization of PolymerCharacterization of Polymer
PRESENTED BY PRESENTED BY Mr. A.V.PATIL Mr. A.V.PATIL
I st sem M. pharm (Pharmaceutics) I st sem M. pharm (Pharmaceutics)
GUIDED BYGUIDED BYMr . S.G.BIDKARMr . S.G.BIDKAR
Department of PharmaceuticsDepartment of Pharmaceutics
AISSMS COLLEGE OF PHARMACYAISSMS COLLEGE OF PHARMACYPUNEPUNE
23/09/200923/09/2009
![Page 2: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/2.jpg)
2
CONTENTS INTRODUCTION
History of Polymers Definition
TYPES OF POLYMER Classification of Polymers Characteristics of Polymers Properties of Polymers
![Page 3: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/3.jpg)
3
1. Characterization of Polymer1. Chemical properties
2. Thermal properties
3. Mechanical properties
4. Other techniques
References
![Page 4: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/4.jpg)
4
INTRODUCTIONHistory of Polymers
In 1920 that German chemist Hermann Staudinger (1881–1965)
• Rewarded with the 1953 Nobel Prize in Chemistry
Made his macromolecular hypothesis, suggesting that polymers are molecules formed by the permanent attachment of countless smaller molecules.
![Page 5: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/5.jpg)
5
Definition Polymers are substances whose molecules
have high molar masses and are composed of a large number of repeating units
The number of repeating units in one large molecule is called the degree of polymerization. Materials with a very high degree of polymerization are called high polymers. Polymers consisting of only one kind of repeating unit are called homopolymers. Copolymers are formed from several different repeating units.
![Page 6: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/6.jpg)
6
TYPES OF POLYMER
NATURAL POLYMER EX- proteins, starches, cellulose, and latex
SYNTHETIC POLYMER
EX- Polymethyl methacrylate
Polystyrene Polyvinyl Chloride
Polystyrene
![Page 7: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/7.jpg)
7
Classification of Polymers
According to the mechanical response at elevated temperatures
•Thermoplasts
polymers soften when heated and harden when cooled
•Thermosets: Thermosetting polymers become soft during
their first heating and become permanently hard when cooled. They do not soften during
subsequent heating.
![Page 8: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/8.jpg)
8
Characteristics of Polymers:
Low Density Low coefficient of friction Good corrosion resistance Good mouldability Excellent surface finish can be
obtained
![Page 9: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/9.jpg)
9
Can be produced with close dimensional tolerances
Economical Poor tensile strength Low mechanical properties Poor temperature resistance Can be produced transparent or in
different colors
![Page 10: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/10.jpg)
10
Properties of Polymers: Chain length - in general, the longer the
chains the stronger the polymer; Side groups - polar side groups give stronger
attraction between polymer chains, making the polymer stronger;
Branching - straight, unbranched chains can pack together more closely than highly branched chains, giving polymers that are more crystalline and therefore stronger;
Cross-linking - if polymer chains are linked together extensively by covalent bonds, the polymer is harder and more difficult to melt.
![Page 11: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/11.jpg)
11
Polymer characterization
1 Chemical structure 2 Thermal properties 3 Mechanical and dielectric spectroscopy 4 Morphology 5 Other techniques
![Page 12: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/12.jpg)
12
Chemical properties
Molecular weight distribution Additives analysis Volatile organic compounds and odors Residual monomers Identification and quantitation of formulation
components Water content Identification and determination of structural
polymer design (branding, copolymer, composition, functionality and end capping)
![Page 13: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/13.jpg)
13
complex chemical structure of polymers polymeric material typically consists of a distribution
of molecular sizes and sometimes also of shapes Chromatographic methods like size exclusion
chromatography often in combination with Low-angle laser light scattering (LALLS)
viscometry can be used to determine the molecular weight distribution as well as the degree of long chain branching of a polymer,
![Page 14: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/14.jpg)
14
Thermal properties THREE MAIN THERMAL ANALYTICAL TECHNIQUES
•THERMOGRAVIMETRY (TG). THERMOGRAVIMETRY (TG).
•DIFFERENTIAL SCANNINGCALORIMETRY (DSC).DIFFERENTIAL SCANNINGCALORIMETRY (DSC).
• DYNAMIC MECHANICAL ANALYSIS (DMA)DYNAMIC MECHANICAL ANALYSIS (DMA)
![Page 15: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/15.jpg)
15
Thermogravimetry (TG)
“It is a technique whereby the weight of the substance, in an environment heated or cooled at controlled rate, is recorded as function of time or temperature.”
Types of Thermogravimetry: 1. Isothermal thermogravimetry. 2. Quasistatic thermogravimetry. 3. Dynamic thermogravimetry.
![Page 16: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/16.jpg)
16
Principle In this method a substance is heated from
lower temperature to higher temperature at a fixed rate of heating. The changes in weight of the substance as it is heated to higher temperature are recorded as a function of sample temperature.
The graphical representation of weight as a function of temperature is called as thermogram.The weight should be plotted on ordinate with weight decreasing downwards & temperature on the abscissa increasing from left to right.
![Page 17: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/17.jpg)
17
It can be concluded that thermogravimetry is concerned with change in weight of the material as its temperature changes.
First, this determines the temperature at which the material loses weight. This loss indicates decomposition or evaporation of the sample.
Second, the temperature at which no weight loss takes place indicates stability of the material. These temperature ranges are physical properties of the chemical compounds & can be used for their identification.
![Page 18: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/18.jpg)
18
Instrumentation of Thermogravimetry
![Page 19: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/19.jpg)
19
Differential Scanning Calorimetry (DSC) Differential scanning calorimetry or
DSC is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference are measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment. Generally, the temperature program for a DSC analysis is designed such that the sample holder temperature increases linearly as a function of time.
![Page 20: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/20.jpg)
20
Heat flux DSC
![Page 21: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/21.jpg)
21
Principle
![Page 22: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/22.jpg)
22
APPLICATION
Changes in the compositional and structural parameters of the material usually affect its melting transitions or glass transitions and For semicrystalline polymers it is an important method to measure crystallinity.
![Page 23: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/23.jpg)
23
Interpretation:- Tolbutamide and PEG 6000 form a eutectic with a
composition of 30 % TBA and 70 % PEG 6000 with the same melting point as the PEG 6000 used.
The peak A at about 39 0c corresponds to a solid – solid transition of tolbutamide.
![Page 24: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/24.jpg)
24
Evaluation :- The onset temperatures and the heats of fusion ΔH are evaluated from the melting curves.
Sample onset/ΔH Peak A0c
Peak A
J/g
Peak B0c
Peak B
J/g
Peak C0c
Peak C
J/g
TBA 100 % 39 8 - - 127 93
TBA 90%PEG 10 % 39.1 7.4 53.7 19.8 121.1 75
TBA 70%PEG 30 % 39.3 5.8 53.2 51.6 109 48
TBA 50%PEG 50 % 39.4 3.9 54.3 93.9 81.6 22.8
TBA 30%PEG 70 % 39.5 1.5 55.9 138.8 - -
TBA 10%PEG 90 % 39.5 0.3 55.3 166.7 - -
PEG 100 % - - 55 178 - -
![Page 25: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/25.jpg)
25
Phase Diagram.
It describes relationship between melting temperature and composition of multi component system.
To construct phase diagram mixtures of components with different composition are measured with DSC & data is evaluated.
Samples:- Tolbutamide and PEG 6000 as well as mixtures.
![Page 26: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/26.jpg)
26
The phase diagram can be constructed by plotting the onset temperature against the concentration of TBA (in weight present) The solid –solid transition of TBA occurs at about 390c Above 54 0c either the liquid or the solid phase is present
depending on the TBA concentration The dotted lines are extrapolations.
Conclusion:- Phase Diagram of Binary mixtures can be determined by DSC
![Page 27: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/27.jpg)
27
Dynamic Mechanical Analysis
The Q800 utilizes state-of-the-art, noncontact,
linear drive technology to provide
precise control of stress, and air bearings for
low friction support. Strain is measured using
optical encoder technology that provides
sensitivity and resolution. The Q800 is ideal
for high-stiffness applications including
composites.
![Page 28: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/28.jpg)
28
Morphology Morphological parameters- Osmometery Light Scattering Viscometry Gel permeation chomatography mesoscale (nanometers to microns) are very
important for the mechanical properties of many materials.
Transmission Electron Microscopy in combination with staining techniques,
Scanning Electron Microscopy, Scanning probe microscopy
![Page 29: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/29.jpg)
29
OSMOMETRY
Method Is used to determine number average molecular weight Mn.
Only osmatic pressure is sensitive enough to measure high molecular weight characteristic of polymer.
Semipermiable membrane through which solvent can pass ,which exclude polymer molecule.
One filled with pure solvent and one filled with polymer solution
![Page 30: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/30.jpg)
30
Activity of solvent in two compartment is different bcoz polymer molecule
Osmatic pressure driving solvent into polymer solution compartment will develop.
Osmatic pressure for ideal solution ∏∕C≈RT/Mn
To obtain Mn, ∏/c is plotted as function of C and extrapolated to C=0
![Page 31: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/31.jpg)
31
Osmometers (UIC) The Model 833 Vapor Pressure Osmometer is an
effective, easy to use tool for the determination of number average molecular weights of any non-volatile solute in the range of 100-25,000 Daltons.
The Model 231 Membrane Osmometer has the ability to determine number average molecular weights of any solute in the range of 20,000-1,000,000 Daltons
![Page 32: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/32.jpg)
32
Light scattering Scattering of light by liquid can be related to
local fluctuation in density due to thermal motion of molecule
With solution addition scattering arises from local fluctuations in the conc. Of the solute.
Measurement of light scattering of dilute polymer solution it is possible to drive the average molecular weight Mw.
![Page 33: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/33.jpg)
33
Simultaneous dynamic and static light scattering system
The ALV / CGS-8F Compact Goniometer is the common platform for a variety of different goniometer systems. Based on a rotary disk allowing finest angular steps to be performed (rather than a rotary arm) it has four detection angles separated each by 34° in angular space to allow simultaneous measurement of Staticand Dynamic Light Scattering at higher solution.
![Page 34: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/34.jpg)
34
Rheometer(TA Instruments)
The AR-G2 Rheometer is equipped with an environmental chamber for determining the rheology of a sample under controlled conditions. It has a built in viewer so that samples can be monitored through out the
experiment.
![Page 35: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/35.jpg)
35
Gel permeation chomatography Polymer molecules separated according to
their size Sephadex, Bio-Gel (cross-linked
polyacrylamide), agarose gel and Styragel are often used based on different separation
Measuring not only molecular weight but also molecular weight distribution
![Page 36: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/36.jpg)
36
Dilute polymer solution pumped through a series of columns containing porous beds with different pore sizes.
Small molecule take longest path and largest molecule take shortest path through columns
Highest molecule weight species emerges first and lowest mol.wt species will emerges last.
![Page 37: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/37.jpg)
![Page 38: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/38.jpg)
38
Mechanical properties Determined by stress-strain relationship Stress-stretching force applied to sample Strain-elongation of sample under a given
stress. stress-strain relation in polymer are time
dependent Specimen clamped to Instron tester and
measuring force that specimen exerts on load cell
![Page 39: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/39.jpg)
39
STRESS
STRAIN
Fig-stress-strain curve for thermoplastic material (polyethylene)
![Page 40: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/40.jpg)
40
Fig-characteristic stress-stain curve for five different type of polymeric material
![Page 41: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/41.jpg)
41
Other techniques Solid state NMR Spectroscopic techniques: IR, FTIR etc.
The VERTEX 70 FTIR has a spectral range from 30 cm-1 in the far IR, through the near IR and up to the visible spectral range at 25,000 cm-1. The large sample chamber allows for a wide range of accessories with temperature and environmental controls.
![Page 42: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/42.jpg)
42
References Alb, A.M.; Drenski M.F.; Reed, W.F. "Perspective automatic
continuous online monitoring of polymerization reactions (ACOMP)" Polymer International,57,390-396.2008
US patent 6052184 and US Patent 6653150, other patents pending
Retrieved from http://en.wikipedia.org/wiki/Polymer_characterization
Instrumental Methods of Chemical Analysis by B.K.Sharma, Twenty first edition 2002 Page No.232-249
Instrumental Methods Of Chemical Analysis By Gurdeep R.Chatwal,Sham K Anand,Reprint 2005 Page No.2.701-2.738
Remington’s Pharmaceutical Sciences,20th Edition,Lippincott Williams & Wilkins 649,709
![Page 43: Characterization of Polymer](https://reader031.vdocuments.mx/reader031/viewer/2022012306/546a9f8eb4af9fed268b48a3/html5/thumbnails/43.jpg)
43
Chemical structure