ce 006 930 - ed
TRANSCRIPT
DOCUMENT RESUME
ED 120 540 CE 006 930
TITLE Construction: Industrial Arts Curriculum Guide.Middle Schools 6-9. Publication No. 1333(Tentative).
INSTITUTION Louisiana State Dept. of Education, Baton Rouge.REPORT NO VT-102-605PUB DATE 74NOTE 32p.; For related documents, see CE 006 930-935
EARS PRICE NF-$0.83 NC$2.06 Plus PostageDESCRIPTORS Behavioral Objectives; *Career Awareness; Career
Education; Career Opportunities; *ConstructionIndustry: Curriculum Development; *Curriculum Guides;Elementary Secondary Education; *Industrial Arts;Learning Activities; *Middle Schools; ProgramDevelopment; State Curriculua Guides; TeachingGuides
IDENTIFIERS Louisiana
ABSTRACTPart of a series of industrial arts curriculum
materials developed by the State of Louisiana, the tentativecurriculum guide presents an outline for an introductory course onthe construction industry. Designed for use at the middle schoollevel, it is intended that through the performance of the suggestedactivities, student knowledge of work and career opportunities in theconstruction industry will be increased. The four major topicoutlines include: an introduction; managing construction; applyingtechnology to people; and construction production technology.Performance objectives and suggested activities are presented foreach topic. Suggested resources are provided for the implementationof the activities. Each resource is coded to match the list ofresource materials that completes the document. OM
***********************************************************************Documents acquired by ERIC include many informal unpublished
* materials not available from other sources. ERIC makes every effort ** to obtain the best copy available. Nevertheless, items of marginal ** reproducibility are often encountered and this affects the quality ** of the microfiche and hardcopy reproductions ERIC makes available ** via the ERIC Document Reproduction Service 0=4. EDRS is not* responsible for the quality of the original document. Reproductions ** supplied by EDRS are the best that can be made from the original. ************************************************************4***********
S:!. 4 .ts
,
E0089soTENTATIVE
Atrilfr"..ft,
,,cel,;
PUBLICATION NO. 1333
INDUSTRIAL ARTS CURRICULUM GUIDE
MIDDLE SCHOOLS 69
cONSTRUCTION
1974
40
S OE PARTMENT OF NEAL TNEDUCATION & WELFARENATIONAL INSTITUTE OF
IDUCATION
THIS DOCUMENT hAS BEEN REPRO.Dv< o EXACTLY AS RECEIVEO FROMTHE PERSON OR ORGANIZAtION OR.OIN.LYING IT POINTS OF VIEW OR OPINIONSsiPteo DO NOT NECESSARILY REFRESENT OFFICIAL NAttONAL iNSTITUTE oFEOUCATFON POSITION OR POLICY
% .
CONSTRUCTION
Overview
.Upon completion of the course the student will be able to identify that
part of the world was built by the Construction Industry. The student will per-
form activities that relate to the many conveniences enjoyed and often taken for
granted by man in today's society along with the ability to relate and solve the
problems that may arise between Labor and Management. The student will be
able to identify and demonstrate a working knowledge of what Construction per-
sonnel do and the career opportunities available in the Construction Industry.
L.,
v-r i o2.0or
3
CONSTRUCTION
MANAGINGCONSTRUCTION
APPLYINGTECHNOLOGY TO
PEOPLE
4
CONSTRUCTIONPRODUCTIONTECHNOLOGY
(
COORS: CONSTRUCTION
c (
ea.
TOPIC OUTLIKE PERPCIVIANCE OBJECTIVBS SIOGEST3D ACTIV/TILI liESOUROIS
I. IntroductionA. Man and
Technology
B. ConstructionTechnology
Students will be able to discuss thefollowing topics.A. The dawn of manB. The beginning of an economic
systemC. Processing Economic Goods
1. Extracting Economic Goods2. Natural from nature3. Construction4. Manufacture
D Industry
Students will be able to record,examine and compare efficiency inrelation to time and cost per holeusing time and cost charts.
A. Beginning of ConstructionTechnology
B. Construction Technology todayC. Construction Technology in the
futureD. How Construction Technology is
achieved
PA= 3-3
Instructor will explain and demonstratedrilling procesi to be followed andsupervise the drilling of three holesin each board using three types ofdrills by the students.
Students will drill holes in a pieceof wood with an electric drill, ahand drill and a bow drill.
The instructor will show studentsfilm on the world of construction.
(1) page 51(2) Ch. 1(3) page 9
(1) page 53.(2) Ch. 2(3) page 11
(
COURSZ: CONSTRUCTION
( c
TOPIC CUTLITZ PMPOIMANC3 OBJECTIVES SIGGESTM ACTIVITIZS TIESCOP.CDS
II. Managing Construction.
E. Elements of ConstructionTechnology1. Management technology2. Personnel technology3. Production technology
Students will be able to explain andgive examples of constructiontechnology and classify them as tomanagement, personnel and product-ion technology.
A. Management Activity is universalB. Management in Construction
1. Planninga. Formulatingb. Researchingc. Designingd. Engineering
2. Organizinga. Formingb. Monitoringc. Correctingd. Reporting
C. Many persons perform manage-ment activities 1
Instructor will explain and give ex-amples to students the managing ac-tivities related to construction so thatthe students may better discuss thisactivity in the form of a game.
Instructor will explain and give ex-amples to students the managingactivities related to construction sothat the students may better discussthis activity in the form of a game.
PACS 3-4
(1) page 51(2) Ch. 4(3) page 16
1
C
woad CONSTRUCTION
A. Beginning theProject
Students will be able to relate anddiscuss the management, organizingand controlling activities related toconstruction and answer the followingquestions:1. What is to be constructed and
why?2. How does the construction
contractor organize and supplyhis system with tools, materialsand personnel?
3. Who will direct the constructionof this -project?
Students will be able to answer thefollowing questions:1. Who is an initiator?2. What is meant by feasibility?3 . Name some people or groups of
people who may be classifiedas initiators.a. Financial Consultantsb. Management Consultantsc. Technical Consultantsd. Public Relations Consultants
PAGS 3-5
Students, acting as professionalconsultants, identify some basicproblems that exist in their com-munity and recommend a solution.The students, acting as a cityplanning commission, select acommunity project to be supportedand develop the publicity fel theirroject.
(1) page 52(2) Ch. 5(3) page 20
(COMM CONSTRUCTION
( (
1. Selecting aSite
2. Buying RealEstate
3. Surveying andMapping
The student will be able to givesolutions to problems in selectinga site such as cost, location, cli-mate, soil, and zoning.
Students will be able to discuss thefollowing topics:A. History of land holdings
1. Grants2. Parcels or Tracts
B. Records1. Boundries2. Legal Descriptions3. Plats
C. Titles and SurveysO. Change of Ownership
Students will be able to level andimprovised alidade to simulateactual surveying procedure. Studentwill be able to draw profile chartfrom topographic map.
PA= 3-6
Instructor will identify availablesites on an illustration of potentialconstruction sites in a community.Using a table of site feasibility ofeach Site as a potential constructionsite. Students select a site for theproject, and write their reasons fortheir selection.
Explanation by instructor and exhibitof sample deeds and title abstracts.
Instructor will demonstrate and havestudents measure elevation with astadia rod.Record elevation data on a gridsheet. Draw contour lines by
(1) page 52(2) Ch. 6(3) page 22
(1) page 52(2) Ch. 7(3) page 24
a) page 52(2) Ch. 8(3) page 28
(
COMM CONSTRUCTION
(
TOPIC °Mars PERFORMANCE OBJECTIVES S.IGGESTED ACTIVITIES
(
IIES(13RMS
4. Soil Testing
Students will be able to discuss thefollowing topics:1. Land Surveys2. Topographic Surveys3. Route Surveys4. Hydrographic Surveys5. Aerial Surveys6. Construction Surveys
B. Research1. Finding Known points
C. Location Surveys3.. Transit2. Level3. Plane Table .
D. Survey PartiesE. Elevation Surveys
1. Levels2. Surveying altimeter3. Elevation meter
F. Plotting Data
connecting all recorded elevations ofthe same height.
Using a topographic map showing aproposed highway route, plot theprofile of the land surface along thelength of the highway route and alonga cross section.
Student will be able to demonstrate Analyze two soil samples, clay andprocedure for testing soil and corn- sand, to find out if excavationpare compressibility of two types of facing is needed.soil.
PAM 3-7
(1) page 53(2) Ch. 9(3) page 33.
1
1
(
coon: CONSTRUCTIONi
C
TOPIC COMO Pstporei MOS OBJECTIVES
B. Designing andEngineeringConstructionProjects
Student will be able to identifyrefine, analyze, make decisionsand implement the design process,using the following design guides.
1. Function2. Appearance3. Cost4. Construction Materials5. Strength
Students will be able to indicatefor each project whether the chiefdesigner was an architect anengineer or a combination of both.
PAM 3-8
SUGGEST3D' ACTIVITILS:1
1
RZSCURCES
Test two soils, clay and sand, forwater absorption.Analyze the soil strengths of layand sand.Test and compare the sbengh ofclay and sand after water hasevaporated.Test and compare the compresf-ibility of clay and sand using twotamping techniques.
Instructor will have students a4werwhat steps are represented in e hproject described in Lab manua .
After studying illustrations and dOs-criptions of construction projects`;students will indicate for each pip-ject whether the chief designer wasan architect, engineer, or an arclii-tect and an engineer.
(1) page 53(2) Ch. 3.0(3) page.38
( ; C. (
CORM CONSTRUCTION
TCPIC OUTLINE ?INFORM= OBJECTIVES SUOGEST3D ACTIVITIES NESOURCES
1. Identifying theDesignProblem
a. DevelopingPreliminaryIdeas
b. Refining Ideas
Student will be able to list severalkinds of data that identify the needsthat the following structures willfill.
1. Warehouse2. Garage3. School4. Hospital5. Factory6. Department Store
Students will be able to list ideasfor park area and structures and willdevelop and modify the ideas to bestsuit the needs
Students will be able to draw inrefined ideas on park or structuresketch.
In designing a community park,identify the major needs that the parkshould meet.List several kinds of data that willhelp identify the needs.Having the needs and the relateddata available to them, studentswill evaluate the data and determinethe effect on the design problem.
Students will develop preliminaryideas for park areas and structures.Develop preliminary ideas for oneof the structures. Instructor willgive students an explanation of whatis meant by preliminary ideas.
Draw refined sketch of a location forpark areas and structures. Plan thewalkways to connect the areas. Usinga list of design requirements for thepark areas and structures, ..;ratv arefined sketch of a structure.
(1) page 54(2) Ch. 11(3) page 41
(1) page 54(2) Ch. 7(3) page 43
(1) page 54(2) Ch. 13(3) page 49
COMB. CONSTRUCTION
MC MU= PPRIORPLUIM 110711/10
2. Analyzing theDesign
a. Selecting theDesign
Students will be able to calculate thegrade limits for three types of madmaterials.
Students will be able to demonstratemethod of detennining amount ofcounter-balance weight needed for abascule bridge.
Students will be able to act as acommittee member of a designselection committee.
ACTIVITIZSSD 112SOURCES
Compute the weight needed to coonbalance a vehicle load on a bridge.
Compute the grade limit for roadwaysmade of concrete or blacktop, gravel,and sand, knowing the *eight of avehicle in tons and the pounds ofengine pull.Test the computation by constructingand testing a simple road grade. Working with the results from the aboveactivities prepare and present to theclass a report of the findings fromtesting a model bridge counterbalanceweight and a model roadway gradelimit.
Student ActivitiesAct as a design selection committee.Select the best bascule bridge designfor the community park and presentthe selection to the class. Usingdesign requirements and constructionspecifications for a roadway designfor the community park and presentthe selection to the class.
PAGE 3-10
(1) page 54(2) Ch. 14(3) page 49-53
(1) page 54(2) Ch. 15(3) page 55
MORSE: CONSTRUCTION
TCPIC OUTL/F.E PERFORMANCE OBJECTIVES SIGGESTED ACTIVITIES TESWP.CES
b. Making Work- Students will be able to locate and Identify the following from a set of Cl) Page 55ing Drawings identify such items as location,
length, width, and elevations.contract working drawings;
(1) Location of the house(2) Ch. 16(3) page 57-66
(2) Overall length and width ofthe house and garage
(3) Scale of the left, right, andrear elevations
(4) Depth of the concrete blockfoundation wall
(5) Roof, detail, and heating plan.
Using a contour map of a buildingsite, locate, layout, and sketch astructure to scale on a site plan;include compass orientation drive-way placement, and dimensioning.Draw the foundation plan from thedesign requirements for a garage toscale and dimension the drawing.Make a section drawing of a garagefoundation to scale, using the designrequirements and the appropriatesymbols. Draw a foundation plan fora proposed room and porch addition,showing the foundation wail andfoundation footing. Locate the
PAGE 3-11
COMISEI CONSTRUCTION
TOPIC OUTILDIS
C c
PERFORMER OBJECTIVES =CRIS= ACTIVITIES RESOURCES
.... c. WritingSpecifications
3. The Designingand Engine-ering Cycle
Student will be able to complete aplumbingfixture specification sheetby recording catalog number, des-cription, and cost for each fixture.
Complete a door specifications sheetby recording the catalog descriptioncatalog number, and cost.
Student will be able to redesign apark site in light of the fact of anunsatisfactory community park sitedesign and requirements.Assemble a Series of drawings intoorder with a stapler.
I
PAGS,3-12
position of electrical fixtures on afloor plan for a house, using anElectrical Legend and FixtureSchedule. Working from a set ofstairway design factors, compute thenumber of concrete stair risers andtreads needed for a given rise, drawthe stairs, and use the appropriatesymbols to indicate material.
Instructor should exhibit specificationsheets and give example of practiceto be followed.
Instructor will explain to studentthe consideration to be given re-designing a site or structure
(1) page 55(2) Ch. 17
(1) page 55(2) Ch. 18(3) page 69
(
COMM CONSTRUCTION
TOPIC OUTLINE
C. Selecting a Builder
1. Contracting
2. Estimating andBidding
PERPOINIANCE CWWTIVES
Student will be able to list the typesof contracts owner will consider inhiring a contractor.
1. Fixed price2. Cost plus a fixed fee3. Cost plus a percentage of
cost4. Incentive
Student will be able to select a con-tractor and complete a contract formfrom one of three bidders.
Student will be able to suggest whea contractor of his estimator may-getinformation concerning:
1. Size and kind of materialsneeded
2. Labor Costs3. Equipment Cost4. Overhead cost
S/GGESTIID ACTIVITIES
Select an appropriate constructioncontract for a specific constructionjob and give reasons why it wasselected.
Select a bidder.Complete a contract form.Answer questions related to bidselection and contract accuracy.Instructor will explain to students ifthey cannot understand instructionsconcerning signatures by con-tractors and witnesses.
Estimate whether a galvanized or acopper plumbing system will givethe most profit considering a planand costs.Become familiar with the terms andsequence of the managed productionsystem of the "Big Builder" game.Compete against opponalt playersin bidding for construction jobs and
PACE 3-13
(
RESOURCES
(1) page 56(2) Ch. 19(3) page 72
(1) page 56(2) Ch. 20(3) page 74
(1) page 56(2) Ch. 21(3) page 75
(
CCOIL.Ms CONSTRUCTION
( (
3. Scheduling
4. MakingInspections
5. Transferringthe Project
Student will be able to schedule atotal of 12 hours time so as tocomplete a job of repairing a citysidewalk.
Students will be able to act as abuilding inspector and fill out abuilding inspector's card.
Student will be able to play the roleof a contractor and correct any de-fic fences .
gaining the most,profit. Estimatewhether a brush or a roller will giveyou the most profit to you whenpainting a room.
Using a bar chart and CPM chart,schedule the operations of a jobaccording to the sequence in whichthey should occur and the time re-quired using the bar chart technique.Schedule the deliveries of materialsusing the CPM chart.
If possible, instructor should getcity building inspector to come outand inspect structure. Completethe rough wiring in a structure, andnote corrections needed.Inspect the plumbing in a structure,and note corrections needed.
Complete a punch-list form, awarranty form, and a release form.
p; Cr: 3-14
(1) page 56-37(2) Ch. 22(3) page 7-)
(1)(2)(3.)
page 65Ch. 54page 1.6;
pi ge 6:./...A.. 619aue 21 ! -213
4
atoms CONSTRUCTION
HI. Applying Technology A. Personnel Technologyto People 1. Hiring
2. Training3. Working4. Advancing5. Retiring
A. Working As aContractor
B. CollectiveBargaining
Students will be able to relate theclassifications of technology asapplied to people in the categoriesof hiring, training, working, ad-vancing and retiring.
Student will be able to make a de-cision and give reason concerninguse of material other than specified.
Student will be able to act as aunion spokesman and negotiatecontract agreements and dis-agreements.
PAWS
';Ur;0733T."i P.M . 3
Students, structured into groups offour or five, are given the opportunityto apply the management technology #
of organizing to people and things.Each group consists of a foreman,timekeeper, recorder, safety and ;;
grievance man, and equipment super-visor. 1
Decide whether to use materials otherthan those specified or wait for therequired material and pay a fine.From problems arising from thedecisions made in the above, maketwo other decisions.
Give reasons why a new contractis or is not necessary when the oldone expires.Negotiate for contract acceptance.
Instructor will divide class into two(2). groups and explain to the classthe role each group should play.
3-15
r.
40(1 t)th.jt 17.04.
(2) 1.
(3) page
(1) page 57(2) Ch. 23
(1) page 57(2) Ch. 24(3) page 83-84
CORM CONSTRUCTION
TOPIC OUTLINE PERFOMANCE OBJECTIVES suckasrm ACTIVITIES RESOURCES
C. Hiring Construc-tion Personnel
D. Training andEducating forConstruction
E. WorkingConditions
F. Advancing inConstruction
Student will be able to act as work-er and personnel manager.
Studeqt will be able to list some ofthe requirements for a good appren-ticeship training program.
Student will be able to write a setof rules governing working con-ditions in the shop.
Student will be able to list the timelength of preparation for various oc-cupations using occupational guide.
PIa the role of a personnel managerinterviewing job applicants. Playthe!role of a job applicant.Inslructor will monitor studentact vities.
I
Indicate some of the requirementsfor a good apprenticeship trainingprogram.Find the name of a potential em-ployer in a telephone directory.
Instructor should make suggestionsas to what he thinks students can doto write a set of rules governingworking conditions in the laboratory.
In a role-playing situation concern-ing a labor-management grievance,serve as a member of a grievancecommittee, and present the positionfor a satisfactory solution from theworker's viewpoint.Serve as a 1..:sraler of the gnAvancecommittee.Participate in a simulated collectivebargaining session to work out a
PAGE 3-16
(1) page 57(2) Ch. 25(3) page 85
(1) page 57-58(2) Ch. 26
(1) page 58(2) Ch. 28(3) page 91
(1) page 60(2) Ch. 34(3) page 108
1 COMM CONSTRUCTIONI
TOPIC OUTLINE PERFORMANCE OBJECTIM
(
MIGGESTSD ACTIVITIFB gzsouRcss
H. Mediating andArbitrating
1. Striking
IV. ConstructionProductionTechnology
Student will be able to participatein a settlement of a labor dispute.
Student will be able to act out partof a negotiator or member of a picketline in a labor-management dispute.
Student will be able to classifyproduction practices as to preproces-sing, processing postprocessing.
solution to a grievance problem.Serve as a labor or managementmember of a grievance committee andpresent a position for a satisfactorysolution of the problem.Participate in a simulated collectivebargaining session.
Participate in a jurisdictional disputeinvolving two crafts, as a mediator,an arbitrator, or a union representa-tive.
Participate as a negotiator, anobserver, or a member of a picketline in a labor-management disputeand resulting strike.
Classify specific production practicesas preprocessing, processing, orpostprocessing. Classify specificprocessing practices as separating,forming or combining.Construct a site box.
PAGE 3-17
(
110061111110110
(1) page 65(2) Ch. 55(3) page 169
(1) page 66(2) Ch. 59(3) page 3.82
(1) page 58(2) Ch. 29(3) page 94
COURSE: CONSTRUCTION
TOPIC OUTLINE
A. Getting Ready toBuild
1. Clearing theSite
2. Locating theStructure
PERFORMANCE OBJECTIVES
Student will be able to identify andlocate temporary constructionfacilities.
Student will be able to list a practi-cal procedure to be followed in clear,Ing the .site as to cost and salvagepossibility, of various materials.
,
1
Student will be able to locate cornersof a structure using string and batterboards.
i
i
1
i
SUGGESTED ACTIVITIES
Locate buildings, water mains, tele-phone lines, roads, and propertylines, using a site box and a con-struction site plan. Locate tem-porary facilities where they will beefficient. Instructor will make sug-gestions as to consideration to givenin selecting temporary facilities.
Identify the practice and equipmentused for clearing the site of ob-stacles which interfere with a pro-posed construction project. In-structor will explain the most ef-ficient technique for disposing ofsite obstacles and determine the costof clearing.Instructor will inform students of thefactors to be considered in clearingwith regard to salvageable material.
Construct right angle batter boardsto be used to locate a structure ona simulated building site.Locate the outside walls of a build- 0ing by running lines to points on thehatter boards. Locate the four
PAM; 3-18
It ESCURCES
(1) page 58(2) Ch. 30(3) page 98(6) Sec. 8
(1) page 59(2) Ch. 31(3) page 100-101(6) Sec. 8
(1) page 59(2) Ch. 32.(3) page 103
( ( (
COMM CONSTRUCTION
TOPIC CISTLINE PBUTCfeiiiiiCE OBJECTIVES MGOESTZD, ACTIVITIES If ZKIURCES
3. Earthmoving
4. StabilizingEarth andStructures
B. ClassifyingStructures
Student will be able to calculate theamount of truckloads of soil needed tofill a 100 cubic year hole and mostefficient and least expensive methodsof earthmoving.
Student will be able to explain thereason for stabilizing the wall of anexcavation and demonstrate use ofbraces and shoring.
Student will be able to identify whatparts of a structure constitutes sub-structure and superstructure.
PAGE 3-19
corners of a building by intersectinglines attached to batter boards.
Instructor will explain how to figurehow many truckloads of soil areneeded to fill a 100 cubic year holewith compacted soil.Using an efficiency chart, equipmentcosts, and a graph to determine acresmoved per hour, determine the amountof earth per hour.Select the proper earthmoving equip-ment.Determine the equipment costs.
Underpin a simulated structureduring the excavation of an adjacentarea.Indicate the practices of trimmingand stablizing. Instructor shouldpoint out the hazards involved fromcave-ins.
Select and sketch a structure.Identify the substructure and super-structure.
(1) page 59(2) Ch. 33(3) page 11C 123
(1)(2)(3)
(1)(2)(3)
page 6CCh. 31.page 112
page 60Ch. 36page 115-120
(
COURSE: CONSTRUCTION
( (
1. SettingFoundations
a. BuildingForms
b. SettingReinforce-ment ..-
c. MixingConcrete
Student will be able to demonstratewhy structures need foundations andexplain why different materials areused.
Student will be able to lay-out mark,saw and assemble the parts of a form.
Student will be able to measure, markcut, bend, seat, and tie reinforcingsteel in the form.
Student will be able to explain thematerials involved in mixing of con-crete and identify these materials.
Determine what happens when a loadis applied with and without a spreadfooting. Determine what happens tothe bearing surface when a load isapplied to a floating footing.
Instructor will have students lay outmark, saw and assemble necessaryequipment, supplies, and drawingsfor a footing form and column form.Instructor will observe student ac-tivity and answer any questionsstudents may have.
Measure, mark, cut, bend, seat, andtie reinforcing steel in a column formrequiring the setting or reinforcement.
State. the proportions for a concretemix. Tell what a slump test is andwhy it is important. Name thesteps involved in mixing and placingconcrete in a footing and columnform.
(1) page 60(2) Ch. 37(3) page 118-120(6) Sec. 10
(1) page 61(2) Ch. 38(3) p. 121-122(6) Sec. 10
(1) page 61(2) Ch. 39(3) page 123
(1) page 61(2) Ch. 40(3) page 124-
126
(
COURSE: CONSTRUCTION
TOPIC Ounnis PMFOIRIANCE OBJECTIVES
( k
SUCCZST3D ACTIVITIES
d. Placing andFinishingConcrete
e. CompletingFoundations
2. Building aSuperstructure
a. BuildingMass andMasonrySuper-structures
b. ErectingSteel Frames
Student will be able to mix, rod,screed, float and finish concrete in aform.
Student will be able to explain curingprocess of concrete and demonstratecorrect procedure.
Student will be able to list severaltypes of superstructures that are builtabove ground.
Student will be able to mix mortarand follow the correct procedure forlaying a concrete block wall.
Students will be able to assemblesteel columns to the concrete footingand demonstrate ability in assemblingfull size material. Students will beable to relate s;ifev factors involvedin working.
Proportion, mix, test, place, rod,screed, and finish concrete to makea concrete footing.
State how long it takes for concreteto set and cure. State why concreteshould be kept moist. while curing.
Instructor will give various examplesof superstructures and types ofmaterial from which they are built.
Demonstration by instructor, MixMortar. Lay and level concreteblock to build a bearing wall.
Assemble steel columns to the con-crete footings. Assemble bracketsto the steel columns. Erect a steelframe. Demonstrate skill in assemblyusing a full-size material. Demon-strate skill in aligning by squaring,leveling, and plumbing the columnsand beams of the steel frame.
PAGE 3-21
11 ZSOURCES
Il .11Milailiiinalli.
(1) page 61(2) Ch. 41(3) page 127-128
(1) page 61(2) Ch: 42(3) page 129(6) Sec. 10
(1) page 62(2) Ch. 43(3) page 131
(1) page 62(2) Ch. 44(3) page 133(5) Ch. 5 and
19
(1) page 62(2) Ch. 45(3) page 134
C ( (
COMM CONSTRUCTION
TOPIC OUTLINE PERPOMIANCE OBJECTIVES SUGGESTED ACTIVITIES RESOURCES
c. ErectingConcreteFrames
d. BuildingWood Frames
Students will be able to build formfor concrete frames, columns, andbeams.
Students will be able to select stock,measure, mark, saw, and assemblethe:1.. Rough floor2. Sills3. Bridging4. Sub-floor5. Lower Plate6. Studs7. Wodord rii lie8. lied ;:31%3
9. lop Plate10 Roof Trusses
Demonstrate the operation of a boomby operating, rigging, hoisting, andsetting steel by use of hand signals.
Build forms for making concrete frameusing the instructions, illustrations,and specifications. Construct,plumb and level shoring members.Instructor should emphasize safetypractice in handling heavy concreteparts and steel. Remind studentsof injury that may result to legs orfeet from dropping heavy objects.
Measure, mark, and saw materials tolength and assemble the rough floorframing of a model structureConstruct bridging in a wood floorand install the subfloor. Lay outthe wall plates and studs of a woodframe floor structure; wt them tolength; assemble the wall sections.Construct and install the wiwiewframe headcr. itld double plot.e5 fira wood froLis Iteucture. La; out,coustruct, anc: erect the roof trussesfor a wood frame wall and floor
PAG3 3-22
(1) page 62(2) Ch. 46(.3) page 140(6) Sec. 10
(1) page 63(2) Ch. 47(.3) Page 145(6) Sec. 11
(
Cantsal CONSTRUCTION
(
TOPIC OUTLINP,.
PPRFOIIIIANCE ODJECTIVB'S FlI00EST30 ACTIVITIES liESOURCES
3. installingUtilities
a. Installingbl Heating,at Cooling, and
VentilatingSystems
b. InstallingPlumbingSystems
Student will be able to classify thevarious systems that are classifiedunder the concept "utility systems."
Student will be able to lay out, cut,drill and assemble ductwork withsheet metal screws. Student willbe able to layout location of ductopen in subfloor of model building.
Student will lay out locations forplumbing lines and bore holes forinstalling lines. Student will be
structure. inspect a completed framestructure and evaluate the findings.
Define the concept "utility systems"Point out examples of ducting,piping, and wiring in the schoollaboratory and in the home.. Namespebific utility planth in the com-munity or nearby.
Instructor will caution students tobeware of cuts from sharp edges ofmetal. Lay out, cut, and bendthree pieces of sheet metal to forma boot, boot cap, and round duct.Fasten together the ends of a formedboot with seam joints. Assembleductwork with a dovetail joint andsheet metal screws.Lay out the location of the ductopening on the subfloor. Saw outthe subfloor opening. Install theductwork in the structure.
Instructor will demonstrate the pro-cedure used to lay out the locationsfor plumbing on a structure. pore
PA= 3-23
(1) page 63. (2) Ch. 48
(3) page 153
(1) page 63(2) Ch. 49(3) page 156
(1) page 64(2) Ch. 50(3) page 158
l . fI t
(
Com= CONSTRUCTION
(
TOPIC OUTLET PERFORMANCE OBJECTIVSS SUGGESTED ACTIV/TIZ, 11 3SOURCSS
A
c. InstallingPipingSystems
d. InstallingElectricalPowerSystems
Student will be able to cut and reamcopper tubing and sweat solder ajoint. Student will be able to securetubing assembly and pipe assembly tothe backing board.
s
Student will be able to lay outwiring and drill holes for the elect-rical system following safe andproper procedures while installingoutlet boxes.
PAGZ
holes for installing plumbing lines.Cut a pipe to a given length.Cut the threads on galvanized pipe.Assemble a pipe and fittings.
Cut and ream copper tubing. Flux,assemble, and sweat-solder coppertubing and fittings.Instructor will point out safety pro-cedure to be followed in using pro-pane torch to avoid serious burn.
Measure distance between the studsof a structure. Lay out and cut gbacking board and nailer.Install the backing board nailer.Secure tubing assembly and thepipe assembly to the backing board.
Complete the installation of the hotwater and cold water lines in astructure.
Lay out the wiring run for t1 .
electrical wiring system. Drill holesdas marked for the electrical system,following safe and proper procedures.Install electrical outlet boxes.
3-24
(7) Unit 21
(1) page 64(2) Ch. 53.(3) page 160-
161(7) Unit 21
(1) page 64(2) Ch. 52(3) page 164(6) Sec. 14
(
ocluRsza's CONSTRUCTION
C (
e. InstallingElectricalCommunica-tions
4. EnclosingFramedSuper-structures
a. Roofing
Student will be able to prepare, andinstall conduit armored cable and non-metallic sheath cable (romex) in astructure'.
Student will be able to name types ofmaterials used to enclose the follow-ing parts of superstructures.1. Roofs2. Exterior Walls3. Floors4. Ceilings5. Partitions6. Exterior walls7. Insulation
Student will be able to list types ofroofs and advantages and disad-vantages of each.
Prepare and install thinwall conduit,flexible armored cable, nonmetallicsheathed cable in a structure.Instructor will demonstrate correctprocedure for bending conduit andstripping insulation from nonmetalliccable (romex).
Prepare and install the wall sheath-ingon a structure.
Nail roof sheathing to the upperchords (rafters). Measure, cut, andapply building felt with a staple gun.
(1) page 64(2) Ch. 53(3) page 165(6) Sec. 14
(1) page 65(2) Ch. 56(3) page 172
(1) page 66(2) Ch. 57(3) Page 174(6) Sect. 11
(
COURSE: CONSTRUCTION
TOPIC OUTLINE
b. EnclosingExteriorWalls
C. Insulating
d. ApplyingWallMaterials
PERPoRHANCE OBJMITIVF..3
C.
AMES= ACTIVITIES
(
RESOURCES
Students will be able to list severaltypes of materials used to encloseexterior walls and apply felt to theexterior wall of a structure, and in-stall flashing and a window frame uniin a structure.
Student will be able to list reasonsfor insulating, type of material usedand method of applying.
Student will be able to measure, cutand install drywall board by usingjoint cement andttape. Student willdemonstrate correct procedures forapplying plaster to a simulated wallsection.
Apply building felt to the exteriorwall of a structure. Locate andinstall a corner board on a structure.Lay out, cut, and install verticalsiding on the gable end of a structure.Install a soffit. Measure, cut, andinstall return fascia and rake. Installa window frame unit in the structure.Bend flashing and install it over thewindow.
(1) page 66(2) Ch. 58(3) page 179(6) Sec.. 11
Instructor will demonstrate the proper (1) page 66method used to measure, cut, and (2) Ch: 60install blanket insulation. (3) page 188Instructor will caution students ofsafety practices to be followed whenusing staple gun and installing fiberglass.
Measure, cut, and install gymsum (1) page 67board to cover the long wall of the (2) Ch. 61structure. Apply joint cement and (3) page 191 -joint tape to an interior wall surface. 194Sand over a first coat of joint cement (6) Sec. 11and apply a second coat. Scnbe,cut, fit, and Install paneling.
PAGE 3-26
COUP= CONSTRUCTION
TOPIC 01.ITLIIIN PERFORMANCE OBJEGTIVW INIGGESTED ACTIVITIES IiISOURCES
e. ApplyingCeilingMaterials
f. Laying Floors
5. Finishing theProject
Student will be able to select thecorrect type of ceiling to be installedbased on type of constructioninvolved.
Student will be able to identifyvarious floor covering materials andbe able to install floor tile.
Student will be able to measure, cut,(miter or cope) molding and properlyinstall using nail set.
a. Painting and Student will be able to list variousDecorating I coating used and explain why dif-
ferent paints must be used for
PAGE
Mix and apply a brown coat of plasterto a simulated wall section.Instructor will demonstrate pro-cedure for taping and floating drywaft and mixing and applying plaster.
Measure, cut, and install furringstrips and ceiling tile.
Instructor will demonstrate correctprocedure for laying out, applyingmastic and installing vinyl tile.Instructor will remind students ofnecessity of proper ventilation withsubstances to install tile.
Install an interior window casing.Install baseboard, base shoe, andcove molding. Instructor will demon-strate correct, method of measuringand cutting molding.
Explain in what ways the specifica-tions for paint used to line highwaysdiffer from the specifications for
3-27
(1) page 67(2) Cli. 62(3) page 196
(1) page 67(2) Ch. 63(3) page 197
(1)(2)(3)
(1)(2)(3)
page 67Ch. 64page 199 - 4'202
Page 68Ch. 65page 202
(
COMM CONSTRUCTION
(
.I.
TOPIC OUTLINE PERPORMANcs OBJECTIVES
b. InstallingAccessories
6. Completingthe Site
7. ServicingProperty
(
..."....,..m....m.....,RESOURCESSUGGESTED ACTIVITIES
different jobs. Students will be able paint used on your walls or woodworkto demonstrate his ability to apply at home. List what fixtures orpaint using brush or teller. accessories would need to be in-
stalled on a new school playground aand new football field with trace andfield facilities. Apply paint toexterior and interior 'surfaces.
Students will be able to strip in-sulation, twist wires together, andmake soderless r;onnections andpush wire into outlet boxes.
Student will be able to list theoperations involved in completingthe site such as installation of side-walks, planting of trees and fences.
Student will be able to relate theactivities included in servicing andpost processing of property.
k
Follow proper procedures in instal-ling a duplex convenience outlet,a procelain lamp receptacle, and atoggle switch to complete a groundedsystem in the structure. Connect agrounded (3-prong) male plug to theelectrical system.
Prepare soil and properly plant atree, shrub, or other plant appro-priate to your area.
Perform needed servicing activitieson a structure as determined by aprior inspection.
PAM 3-28
(1)(2)(3)
page 68Ch. 66page 205-206
(1) page 68(2) Ch. 67(3) page 207-
210
(1) page 68(2) Ch. 69(3) page 214-
215
(
COURSE' CONSTRUCTION
( (
TOPIC ouTumr, PERFOMfANCE OBJECTIVES aramsrn.) ACTIVITIES I{ SOURCES
8. Salvaging Students will be able to follow theprocedure listed in salvaging withemphasis on saving all reusablematerial.1. Glass2. Electrical Fixtures3. Trim4. Horizontal Siding5. Roofing6. Building Felt7. %%Indica! Siding8.,,,Sheathing9. .,Paneling
10. Plumbing11. Electrical Wiring12. Roof13. Wall Framing14. Ductwork15. Floor16. Subfloor
Instructor will demonstrate, discussreview and test students concerningthe following hazards to avoid whenconducting salvage procedure.1. Glass2. Nails3. Splinters4. Burrs on pipe and sheetmetal.
Li
CONSTRUCTION
Resource Materials
The following list of resource materials are by no means complete or exhaustive.They merely represent a compilation of the best and most available materials knownand used by the members of the committee.
1. Industrial Technology. Curriculum Guide Unified School District 259.Wiclita, Kansas.
2. Lux, Donald G., Willis E. Ray, and A. Dean Hauenstein. "The Worldof Construction." Bloomington, Illinois: McKnight and
ing ompaty. 1970.
3. The World of Construction. Teacher's Guide. Donald F. Lux, Willis E.Ray, and A. Dean Hauenstein. Bloomington, Illinois: McKnight andMcKnight Publishing Company. 1970.
4. The World of Construction. Laboratory Manual. Donald G. Lux, Willis E.Ray, and Dean Hauenstein. Bloomington, Illinois: McKnight andMcKnight Publishing Company. 1970.
5. J. Edgar Ray. The Art of Bricklaying. Third Edition. Peoria, Illinois:Charles A. Bennett Publishers.
6. Paul Wallach and Donald E. Hepler. Architecture Drafting and Design.Second Edition. New York: McGraw-Hill Publishing Company.
7. Woodin, James C., and Louis E. Hayes. Home and Building Maintenance.Bloomington, Illinois: McKnight and McKnight Publishing Company, 1969.
Note: The entries in this section are numbered for the purpose of reference. Thenumbers listed here correspond to the numbers in parentheses located withinthe text of this publication in section entitled "Resource Materials."
32