7/27/2019 Caracteristicas Maquina Selladora Crafco

1/2

Three sizesto choose

from

Most co

2003, Crafco, Inc.. All Rights Reserved

For more information on Crafco products contact your l ocal Crafco Distributor or call:

800-528-8242420 N. Roosevelt Ave.

Chandler, Arizona 85226, USAPhone 602-276-0406

Fax: 480-961-0513

www.crafco.com

Your local Crafco representative:

Supe

INC.

TM

Pavement Joint AdhesiveCrafco Joint Adhesive is a unique

polymerized asphalt product that isapplied to the longitudinal cold jointinterface between hot mix asphaltpaving passes. A thin layer appliedto the interface bonds less denseor segregated material togetherand waterproofs the joint apex,which prevents raveling and crackformation.

PolyPatchCrafco PolyPatch is a unique blendof polymer modified asphalt andselect aggregate specificallydesigned for repairing pavementdistresses too large for cracksealing and too small for re-paving.

TechCreteCrafco TechCrete is the flexiblesolution for concrete repair and is aproven hot pour repair that isdifferent from all conventional rigidrepair methods. Once in placeTechCrete will move with thepavement and will not de-bond orcrack. With Crafco TechCrete its aone time fix.

Loop SealantCrafco Loop Sealant is widelyaccepted for use in sealing trafficintersection loop detectors. CrafcoLoop Sealant provides 100%encapsulation of the sensor wires.Applicator equipment alsoavailable.

Marker AdhesiveBoth Crafco Standard and FlexibleMarker Adhesive materials assuremarker buttons and lane reflectorsstay where they are placed.Standard and Flexible MarkerAdhesives are hot-appliedbituminous based products that areaccepted worldwide. Applicator

equipment also available.

Roofing & WaterproofingCrafco supplies a variety of bulkand packaged asphalt materialused in the production of asphaltshingles, in the construction ofbuilt up roofing systems and forstructural waterproofing.Applicator equipment alsoavailable.

Crack and Joint SealantCrafco formulates a wide variety of

joint and crack sealants that meetand exceed Federal and Statespecifications. All Crafco Sealantsare guaranteed from start to finish.Crafco has the broadest line ofsealant in the industry makingCrafco your one-stop shop for allyour sealant requirements. Withfour manufacturing facilities acrossthe United States Crafcoguarantees efficient and timelyshipping, supplying customers withproduct on-time, every time.

Additional Crafco Products

he Crafco Super Shot series melter/applicators represents the

most technologically advanced melter/applicators available.TThese state-of-the-art machines offer the ultimate in efficiencyand ease of use. The digital control features of this equipment

accurately controls and regulates the heating temperature of the

sealant and transfer oil. The patented internal pumping system

requires no clean out and features a hydraulic flow rate adjustment.

There are no valves, fewer moving parts and no hose pressure build up

with this state-of-the-art design. Super Shot melters will out-perform

any comparable sized machine available. Crafco offers a one-year

warranty, more options, and greater safety, making these machines the

greatest value with the highest productivity of any melter. The Crafco

Super Shot Melters are the most efficient and easy to use

melter/applicators available today!

Super Shot 250 w/engine cover

Super Shot 60

There are three sizes to choose from. The Super Shot 60 is a 60-

gallon capacity unit, which features automatic digital controls. It is

propane fired, with a heated hose and wand. This machine is

designed for used on projects under 2,000 pounds of sealant per day.

The Super Shot 60 is also available as a skid mount.

The mid-sized 125 gallon capacity Super Shot 125 offers the best

versatility. Ideal for mid to large sized projects, this unit is diesel

powered available with an optional compressor or a labor saving Auto

Loader.

The oversized 250-gallon SS250 is designed for large projects. Thismachine will out-perform any melter in its class and is available with

many standard options.

Super Shot 125w/ optional compressor

Choose your size, choose your options!

Personalize your unit.

INC.

Spray Injection PatcherThe Crafco Spray Injection Patchersare the most cost effective repairsystems for pothole repair today.Distressed pavements are cleaned,tack coated, and filled in minutes byone continuous operation. Thissystem can be used year round andis an ideal addition to yourpavement preservation system.

7/27/2019 Caracteristicas Maquina Selladora Crafco

2/2

Super Shot Melters

Super Shot 250 shown with router carrier, compressor,engine cover and light bar options.

The safest and most technologically advanced crack sealing melter on the marke

built to

The patented pump technology of the Crafco Super Shot melters

is what makes the Super Shot the most productive and lowest

maintenance melter in the industry. The Crafco patented pump is

mounted inside the melter. Mounting the pump inside the melter

achieves a number of key goals. These goals are; eliminating

material re-circulation, eliminating outside plumbing and high-

pressure lines while decreasing pump wear. By eliminating the

need for re-circulation the pump runs only when material

application is needed making this an on-demand system.

Conventional pumps run continuously re-circulating material

constantly during operation causing premature wear to the pump

shortening its life. The life of the Super Shot melter pump will

last many times longer than convention pumps.

The on-demand system increases operator safety with the

elimination of high-pressure lines that can fail while increasing

productivity and heat-up time. Because the pump is mounted

internally the pump requires no packing that can leak eliminating

the continual packing maintenance that is required with

conventional pumps. Less maintenance in the shop means more

production on the job, more profit and less costs.

Pump replacement when needed takes less then three hours,

getting you back at what is important. The Crafco patented pump

technology will prove to be productive and profitable for you

while continuing to keep the Super Shot melter the industry

leader.

CrafcoInternal Pumping

System

Hydraulic drives

Material line

Agitator paddle

Pump screen

Hardened steel gears

Shaft bushings

FEATURES: 60, 125, and 250 gallon capacity Automated control system No line pressure 45 minute heat-up time No external plumbing No-re-circulating Fewer moving parts Direct flow application "At-tip" variable temperature control

Digital temperature read-out V

ariable flow hydraulics Low fuel consumption No valves Longer pump life

OPTIONS: Auto loader Compressor Router carrier Hitch selection Tail light plug selection Tool box Sealant tips and nozzles Custom paint Fire extinguisher Cab brake control Overnight heater Light bar Spare tire

AUTOMATICAGITATOR SH UT-

OFF and SPLASHPROOF LID Safety is

engineered in. Shut offsare incorporated into: the lid the hose the wand the pump the burner the electrical controls

OPTIONALCOMPRESSORavailable for over tenyearsruns air lance usedto clean out dirt anddebris from cracksincreasing crack sealingefficiency.

OPTIONALENGINE COVERprotect engine from theelements, vandalism andtheft.

INTEGRATEDOPERATOR

CONTROLSYSTEMoperates the

entire unit and overridespossible operator error.Set it and forget it.

LOW VOLTAGE

ELECTRICALLYHEATED HOSE -The hose is heated withlow electric voltage toapplication temperaturewithin 45 minutes. Thismeans no more hoseplug-ups or need toregulate the temperaturein an oven compartment.The hose has the longestworking radius in theindustry and a 360swivel, protected,repairable hose andwand. Hose has a oneyear warranty.

NO VALVES IN MATERIAL LINE - The SuperShot utilizes a unique design that provides for no valveobstructions from the pump all the way to the tip of thewand. No valves means easier operation and no pressurein the lines.

QUICK AND SIMPLE START UP - With the flipof a toggle switch the Super Shot will be ready to operatein less than an hour. Shut down at the end of the day isjust as easy.

EFFICIENT BURNERis positioned safely within theframe giving it protection andample ground clearance.Time saving electricovernight pre-heater optionavailable.

ROUND TANKconfiguration providesconsistent clearancebetween the agitator andtank wall for completeagitation. Featuring a.187 wall thickness forlasting durability.

ON DEMAND PUMPING SYSTEMThe internal pump only operates when the operator activates the micro-switch on the appis no pressure in the material line while at rest and signific antly reduces pump wear. VariThe internal pump is ready to work when the sealant is hot, eliminating the mess and ma

Longer Pump Life Efficient and Aggressive Agitation