blind mate fiber optic platform.ppt€¦ · • 2 each optical and 20 ghz rf blind mates • 14.5d...
TRANSCRIPT
Blind Mate Enclosuresfor Shipboard RF over Fiber
• Proprietary backplanes– Blind-mate Optical
– Blind-mate 20+ GHz RF
– Blind-mate Power/Comms
Blind Mate RF
• Qualified for Shipboard Applications
• Above Decks 23” 3RU enclosure
• Two similar Below Decks 19” 3RU enclosures
1
Blind Mate Optical
Enclosure Features
• Blind mate optical and microwave paths on plug-in modules – Connect to bulkhead connectors on rear panel
– Optical Bulkheads: Diamond AVIM or LC/APC
– RF Bulkheads: SMA or D38999 Circular
• All modules fully hot-swappable
• All enclosures feature:– Removable Fan Box with hot swap/rapid insertion individual Fan Modules
– EMI/Dust seals and filters
• Communications interface for BIT / Telemetry– SNMP over Ethernet
2
Rapid Insertion Fan Module
Standard Plug-in Modules
• Two Module styles, fully hot-swappable
Dual Channel
• 2 each Optical and 20 GHz RF blind mates
• 14.5d x 4.2h x 1.4w
• 30 W max power consumption
Quad Channel
• 4 each Optical and 20 GHz RF blind mates
• 4.8d x 4.2h x 1.6w
• 8.5 W max power consumption
3
Below Decks Standard Enclosure
• 5 Quad Channel slots
• 2 Dual Channel slots
• 1 Comm Module slot
• 2 Power Supply slots• Power Supplies are dual-redundant/ hot swappable
• 19” 3RU x 22” depth
• Requires AC Power– 85-140 V, 60 Hz, 200 W max
• Rear Panel:– 24 LC/APC Optical
– 4 SMA RF
– 20 RF channels in 3 D38999 circular connectors
4
Below Decks Standard Enclosure
5
5 Quad Channel slots
2 Dual Channel slots 2 Power Supply slots
Comm Module slot
Enclosure Front (Fan module removed)
Quad Channel Dual Channel Comm Module Power Supply
Fan Module (not shown)
Below Decks Standard Enclosure
Enclosure Rear (EMI Filter module removed)
AC in
Rx RF Outputs
Rx Optical Inputs
Tx Optical Outputs Tx RF Inputs
EMI/Dust Filter (not shown)
6
Below Decks Standard Enclosure
Below Decks Delay Line Enclosure
• 7 Quad Channel slots
• 1 Comm Module slot
• 2 Power Supply slots• Power Supplies are dual-redundant
• 19” 3RU x 25” depth• 19” 3RU x 25” depth
• Requires AC Power– 85-140 V, 60 Hz, 150 W max
• Enclosure includes 28 optical delay lines– Any channel can have any fixed delay up to 8.0 µs ± 0.5 ns
• Rear Panel:– 28 LC/APC Optical
– 28 RF channels in 4 D38999 circular connectors
7
Below Decks Delay Line Enclosure
8
7 Quad Channel slots2 Power Supply slots
Comm Module slot
AC Power
Fan Access Panel
Above Decks Enclosure
• 13 Dual Channel slots
• 1 Communications Interface (Comm) Module slot
• 23” 3RU x 21” depth
• Requires DC Power• Requires DC Power– 5 V, 70 A max
– -5 V, 15 A max
– 12 V, 6 A max
• Rear panel:– 26 RF (SMA)
– 26 Optical (AVIM)
9
Above Decks Enclosure
10
Typical Performance
Broadband 1-20 GHz Link
20.0
25.0
30.0
35.0
40.0
45.0
0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0
dB
GHz
Noise Figure
A/D Encl.Tx
B/D Encl.Rx
RF in (from Antenna/LNA)
RF out (to DNC/Receiver)
Ship F/O Cable
11
Mean Mean - 3 Sigma Mean + 3 Sigma
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0
dB
m
GHz
Input 1 dB Compression
Mean Mean - 3 Sigma Mean + 3 Sigma