azenqos training cases em 342014.pdf · while script is running, azenqos will collect gps location...
TRANSCRIPT
AZQ Overview
Test Report Analyze
Android Application Dashboard Replay & Report
Field Engineers
Static box in shopping Malls nationwide
Automatic unit in VIP & Public Transport
Centralized Dashboard
Centralized unit control
10 Minutes Reports & Statistics
Root Cause Analysis
Instant Report for Executives & Engineers
Version (License ID)
• Run and record a pre-configured script.
Start Script
• Run an idle script which will not be recorded by AZQ
Network Monitor
• Manage your script here
New/Open/Delete Script
• User can set automatic test characteristics, import cell file, manage audio warnings etc.
Settings
• Upload recorded log to the AZQ server
Upload logs
• Check with AZQ central server for new software version. Please note that while you can update AZQ, you must never update the phone’s firmware! This will cause AZQ to stop functioning and might void our software warranty!
Check for Update
• Open our support page where various VDOs and guides can be found
Help & HOWTO VDOs
• Directly email our support desk with your questions, please remember to fill in the form with your inquiries
Technical Support
Network Monitor
See live network parameters & layer 3 messages without recording log file.
Click at each tab to see parameters you want.
Run in background
If you go to home screen while running script/netmon, you can return to drive test session by clicking “AZENQOS Service” in the notification bar
Create script Start script Save log Upload log See
dashboard
Voice Call
Once you enter “New Script” You will be able to add a new statement by tapping the icon scripts can be saved by tapping the
Create script Start script Save log Upload log See
dashboard
Voice Call
Assuming that we want to create a script to make phone call to number 181 for 10000 times and wait 45 sec between each call. Below is the step to do so:
Add “Loop”
Create script Start script Save log Upload log See
dashboard
Voice Call
Add “Voice Dial”
You will see that “Voice Dial” is inserted into loop automatically.
Create script Start script Save log Upload log See
dashboard
Voice Call
Add “Wait”
Then click and type name as you want such as “short call”
You will see that “Wait” is inserted into loop automatically.
Create script Start script Save log Upload log See
dashboard
Voice Call
Important point here: Don’t forget to make sure that statements are inside the loop
RIGHT WRONG
NOTE: if you add “Loop” first then add statement after that, statement will automatically added inside the loop. So in that case you don’t have to move manually.
Create script Start script Save log Upload log See
dashboard
Voice Call
1
2 Tab at “Voice Dial” then click “Up”
To move statement into a loop
Now “Voice Dial” has become inside the loop. This script will make voice dial 10000 times then wait 45 secs.
Create script Start script Save log Upload log See
dashboard
Voice Call
Move “Wait” inside the loop. Now script has become what we wanted. Make voice dial 10000 times and wait 45 secs. Between each call.
Create script Start script Save log Upload log See
dashboard
Voice Call
While script is running, Azenqos will collect GPS location automatically (OUTDOOR DRIVE TEST) or you can open indoor tab and mark location on the floor plan (INDOOR WALKTEST).
Create script Start script Save log Upload log See
dashboard
Voice Call
Press back or Wait until script ends
Input tag name for searching log by tag name later on dashboard
Create script Start script Save log Upload log See
dashboard
Voice Call
Click at download icon to download Excel Report, Replay or Google Earth
Create script Start script Save log Upload log See
dashboard
FTP Download/Upload
Once you enter “New Script” You will be able to add a new statement by tapping the icon scripts can be saved by tapping the
Create script Start script Save log Upload log See
dashboard
FTP Download/Upload
Add “Loop”, “FTP Download”, “FTP Upload” and “Wait” as figure
Assuming that we want to create a script to make ftp download, ftp upload for 10000 times and wait 15 sec between each attempt. Below is the step to do so:
** When you click add “FTP Download”, “FTP Upload” you will see input form as the next slides. Please input your server IP, user, password, filesize, etc. according to your own server setting.
FTP Download Statement • Specify the file name to download, please make sure that it must
follow the exact same convention (Capital letters, spacing) as the file name on the server.
File name
• User name for the FTP server.
Username:
• IP of the FTP server.
IP
• Password of the FTP server.
Password
• The number of simultaneous download sessions.
Number of sessions
• Specify the download time before the FTP download is considered as failed.
Timeout
• Specify the period of no data activity before the FTP download is considered as fail
Inactivity Timeout
Warning : please note that the target file name must exist on the server for the download to be started
FTP Upload Statement • Specify the size of the file to upload, Please use lower case letter
without spacing to specify the file size. Possible unit can be kb, mb, gb. (eg. 500kb, 25mb, 1gb).
File size
• User name for the FTP server.
Username:
• IP of the FTP server.
IP
• Password of the FTP server.
Password
• The number of simultaneous upload sessions.
Number of sessions
• Specify the upload time before the FTP upload is considered as failed.
Timeout
• Specify the period of no data activity before the FTP upload is considered as fail.
Inactivity Timeout
Create script Start script Save log Upload log See
dashboard
FTP Download/Upload
Important point here: Don’t forget to make sure that statements are inside the loop.
RIGHT WRONG
NOTE: if you add “Loop” first then add statement after that, statement will automatically added inside the loop. So in that case you don’t have to move manually.
Create script Start script Save log Upload log See
dashboard
FTP Download/Upload
If your statement is not inside the loop, you can move it inside a loop by steps below.
1
2
Tab at “FTP Download” and then click up arrow
Now “FTP Download” become inside the loop. Do the same for other statements
Create script Start script Save log Upload log See
dashboard
FTP Download/Upload
While script is running, Azenqos will collect GPS location automatically (OUTDOOR DRIVE TEST) or you can open indoor tab and mark location on the floor plan (INDOOR WALKTEST).
Click at row to see the progress.
Create script Start script Save log Upload log See
dashboard
FTP Download/Upload
Press back or Wait until script ends
Input tag name for searching log by tag name later on dashboard
Create script Start script Save log Upload log See
dashboard
FTP Download/Upload
Choose single log or ALL
Create script Start script Save log Upload log See
dashboard
FTP Download/Upload
Click at download icon to download Excel Report, Replay or Google Earth
Create script Start script Save log Upload log See
dashboard
Browse
Once you enter “New Script” You will be able to add a new statement by tapping the icon scripts can be saved by tapping the
Create script Start script Save log Upload log See
dashboard
Browse
Add “Loop”, “Browse”, and “Wait” as figure
Assuming that we want to create a script to make web browse to http://timesofindia.indiatimes.com/ for 10000 times and wait 15 sec between each attempt. Below is the step to do so:
** When you click add “Browse” you will see input form as the next slide. Please input URL you want to do browse test.
Browse Statement
• The URL of the target web page to open.
URL
• The number of simultaneous download sessions.
Number of sessions (obsolete)
• Specify the download time before the browsing is considered as failed.
Timeout
• Enable or Disable run JavaScirpt on web browser.
Enable JavaScript
Warning : please note that the target URL must exists
Open a webpage using Android web browser.
Create script Start script Save log Upload log See
dashboard
Browse
Important point here: Don’t forget to make sure that statements are inside the loop.
RIGHT WRONG
NOTE: if you add “Loop” first then add statement after that, statement will automatically added inside the loop. So in that case you don’t have to move manually.
Create script Start script Save log Upload log See
dashboard
Browse
While script is running, Azenqos will collect GPS location automatically (OUTDOOR DRIVE TEST) or you can open indoor tab and mark location on the floor plan (INDOOR WALKTEST).
Click at row to see the progress.
Create script Start script Save log Upload log See
dashboard
Browse
Press back or Wait until script ends
Input tag name for searching log by tag name later on dashboard
Create script Start script Save log Upload log See
dashboard
Browse
Click at download icon to download Excel Report, Replay or Google Earth
Create script Start script Save log Upload log See
dashboard
YouTube
Once you enter “New Script” You will be able to add a new statement by tapping the icon scripts can be saved by tapping the
Create script Start script Save log Upload log See
dashboard
YouTube
Add “Loop”, “YouTube”, and “Wait” as figure
Assuming that we want to create a script to open YouTube clip for 10 times and wait 15 sec between each attempt. Below is the step to do so:
** When you click add “YouTube” you will see input form as the next slide. Please input URL you want to do browse test.
YouTube Statement
• Specify the streaming Video to play, Video ID can be found by opening the target YouTube Video on a browser.
• Video ID is the string behind /watch?v=
• For this Video , the ID is T6DJcgm3wNY
• Video ID is case sensitive
Video ID
• the duration before the download is considered as failed.
Timeout(s)
• Specify the duration before the download is considered as failed.
Timeout Before Playing (s)
• AZQ will play the VDO in high definition if the “High Quality” box is checked
High Quality
Create script Start script Save log Upload log See
dashboard
YouTube
Important point here: Don’t forget to make sure that statements are inside the loop.
RIGHT WRONG
NOTE: if you add “Loop” first then add statement after that, statement will automatically added inside the loop. So in that case you don’t have to move manually.
Create script Start script Save log Upload log See
dashboard
YouTube
While YouTube is playing, you cannot go to other tab. Please wait until video ends.
Create script Start script Save log Upload log See
dashboard
YouTube
Press back or Wait until script ends
Input tag name for searching log by tag name later on dashboard