ascatalog web
TRANSCRIPT
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 1/21
Innovative DesignsFor
Positive Parts Transfer
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 2/21
Cylinder Powered Linear Slide ( AFPRS ) 3
Cylinder Powered Bi-Directional Slide ( AFPRBD ) 6
“V” Style Pick & Place ( AFPPV ) 8
“L” Style Pick & Place ( AFPPL ) 10
Cam Operated Shuttle ( AFCS ) 12
Roller Slide ( AFRS ) 14
Options (Shock Absorbers & Proximity Switches) 15
Rod Deflection Calculations 17
Cylinder Rebuild Kits 18
How To Order Auto-Slide Components 19
Sample Order Form 20
Order Form 21
A U T O - S L I DE C ATA L O GC O N T E N T S
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 3/21
Cylinder Powered Linear Auto-Slide
The AFPRS Power Slides are constructed of high quality materials and are designed with an air cylinder between the guiderods providing extremely rigid construction. The AFPRS unit comes standard with self-aligning linear ball bearings. This
compact unit is adjustable at both end stops and requires a minimum amount of table space while providing a wide variety
of application possibilities.
AFPRS with Vertical Mount andShock Absorber Option
Model AFPRS 1/2 x 3
AFPRS with Horizontal Mount and ProximitySensor Option
Model AFPRS 1/2 x 2 1/8 –H-P
- V—S
Page 3 of 21
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 4/21
Cylinder Powered Linear Auto-Slide
3/8” and 1/2”
MODEL NUMBER STANDARD STROKE B C D E F G H J K L
AFPRS 3/8 2.25 1.44 9.81 0.38 8.81 0.50 0.22 2.56 3.00 1.63 0.56
AFPRS 1/2 2.13 1.50 9.88 0.38 9.00 0.63 0.25 3.75 4.25 2.38 0.75
MODEL NUMBER CYLINDER BORE M N P R S T U W X Y
AFPRS 3/8 0.75 0.75 1.13 0.56 0.88 2.38 1.19 0.88 0.50 NO. 10 1/4-20
AFPRS 1/2 1.13 0.94 1.50 0.63 1.12 3.50 1.56 1.06 0.63 NO. 10 1/4-20
Page 4 of 21
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 5/21
Cylinder Powered Linear Auto-Slide
3/4” and 3/4” Heavy DutyThe Model AFPRS 3/4 Power Slides are designed with larger component blocks, shafting and bearings to accommodate your heavier work application requirements, while still offering all of the streamline features of our other power slide models.
MODEL NUMBER STANDARD STROKE B C D E F G H J K L M
AFPRS 3/4 3.13 1.50 12.50 0.50 11.75 1.00 0.31 4.50 5.13 2.75 0.75 1.00
AFPRSH 3/4 4.50 2.375 16.50 0.75 15.75 1.00 0.38 5.13 5.88 3.13 0.94 1.13
MODEL NUMBER CYLINDER BORE N P R S T U W X Y Z AA BB
AFPRS 3/4 1.13 1.75 0.63 1.25 4.25 1.75 1.13 0.88 1/4” 5/16-18 4.00 3.00 1.00
AFPRSH 3/4 1.37 1.88 0.63 1.25 4.63 1.88 1.25 0.88 1/4” 5/16-18 5.75 4.25 1.25
Page 5 of 21
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 6/21
Cylinder Powered Bi-DirectionalAuto-Slide
Our AFPRBD Auto-Slides are constructed of the same high quality materials as our cylinder powered linear Auto-Slides.We have designed these slides with an air cylinder between the guide rods which provides extremely rigid construction.
We have also designed them to be adjustable at all four end stops. These slides are capable of handling a wide variety of
applications while utilizing a minimum amount of table space.
AFPRBD—Left Hand Assembly
Model AFPRBD 1/2 x H3 x V3—L
AFPRBD with Adjustable ShockAbsorber & Proximity Sensor Option
Model AFPRBD 1/2 x H3 x V3 - S - P
Page 6 of 21
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 7/21
Cylinder Powered Bi-DirectionalAuto-Slide
The Model AFPRBD is a bi-directional power slide comprised of two cylinder powered slides mounted at 90 degree angles.Even though this item is able to handle multiple tasks, we have kept the overall size of it compact. Excellent choice for multi-directional design applications including x-y tables, walking beams and pick & place devices. The AFPRBD unitcomes standard with self-aligning linear ball bearings.
MODELNUMBER
RODDIA.
STDSTROKE
CYL.BORE A B C D E F G H J K
AFPRBD 3/8 0.38 2.13 0.75 0.75 1.44 0.81 0.50 2.50 3.00 0.25 5.06 6.94 0.75
AFPRBD 1/2 0.50 3.00 1.13 0.88 1.50 0.81 0.63 3.38 4.00 0.31 6.13 8.88 0.75
AFPRBD 3/4 0.75 4.00 1.13 1.00 1.50 0.94 0.63 4.25 5.00 0.38 7.13 10.88 0.75
AFPRBDH 3/4 0.75 4.75 1.38 1.00 2.375 0.94 0.75 5.25 6.00 0.38 8.75 13.25 0.75
MODELNUMBER L M N P R S T U V W X Y Z
AFPRBD 3/8 1.88 0.50 2.88 0.75 1.00 2.50 0.25 1.50 1.00 .25 2.25 10-32 10-32
AFPRBD 1/2 2.75 0.50 3.88 0.94 1.38 3.50 0.25 1.50 1.00 0.25 3.00 1/4-20 10-32
AFPRBD 3/4 3.38 0.63 4.88 0.94 1.50 4.50 0.25 1.75 1.25 0.25 3.31 1/4-20 1/4-20
AFPRBDH 3/4 4.38 0.63 5.88 1.13 1.75 5.38 0.31 1.75 1.13 0.31 3.75 1/4-20 5/16-18
Page 7 of 21
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 8/21
Pick & Place—”V” StyleAuto-Slide
The AFPPV Pick & Place device is operated by internally mounted air cylinders that provide a streamlined design andaccurate part placement. It provides a stationary mount at the “y” axis. This compact unit is adjustable at all four end stops
and requires a minimum amount of table space while providing a wide variety of application possibilities.
AFPPV Left Hand Assemblywith Shock Absorber andProximity Sensor Options
Model AFPPV 1/2 x H6 x V3—S—P—L
Page 8 of 21
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 9/21
Pick & Place - “V” StyleAuto-Slide
MODELNUMBER S T U V W X Y Z AA BB CC DD EE FF GG HH JJ KK
AFPPV 3/8 3.25 2.00 2.94 0.38 2.00 1.00 1.00 0.72 1.59 3.00 0.38 2.38 0.31 0.31 0.94 10-32 0.28 0.16
AFPPV 1/2 4.25 2.25 4.06 0.56 4.44 1.19 1.38 0.72 1.78 3.15 0.38 2.530 0.31 0.38 0.88 1/4-20 0.28 0.16
AFPPV 3/4 5.00 2.25 5.06 0.75 3.50 1.19 1.50 0.88 2.25 3.81 0.50 3.06 0.38 0.50 1.25 1/4-20 0.28 0.22
AFPPVH 3/4 6.00 2.75 6.06 0.75 4.50 1.56 1.75 1.00 2.59 4.50 0.75 3.81 0.38 1.00 1.75 1/4-20 0.34 0.22
MODELNUMBER
RODDIA.
STROKEVERT.
STROKEHORIZ.
CYL.BORE A B C D E F G H J K M N P R
AFPPV 3/8 0.38 2.13 4.00 0.75 10.81 3.75 8.69 3.88 2.38 1.38 2.69 1.44 1.88 1.44 0.50 3.00 2.88 1.50
AFPPV 1/2 0.50 3.00 6.00 1.13 14.00 4.31 10.75 5.00 2.38 1.38 2.75 1.50 2.75 1.44 0.50 4.00 3.88 1.75
AFPPV 3/4 0.75 4.00 8.00 1.13 17.00 4.94 13.00 6.00 2.38 1.50 2.88 1.50 3.38 1.44 0.63 5.00 4.88 1.75
AFPPVH 3/4 0.75 4.75 8.00 1.38 19.19 5.94 16.06 8.00 3.50 2.25 4.13 2.375 4.38 1.94 0.63 6.00 5.88 2.25
Page 9 of 21
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 10/21
Pick & Place—”L” StyleAuto-Slide
The AFPPL Pick & Place device is operated by internally mounted air cylinders. These air cylinders provide a streamlineddesign with accurate parts placement. The unit is designed to accommodate those special “long-reach” applications.
AFPPLWith Shock Absorber OptionModel AFPPL 3/4 x H5 x V5—S
Featured Option:AFGH-210 Gripper Head
N N N O O O L L L O O O N N N G G G E E E R R R A A A V V V A A A I I I L L L A A A B B B L L L E E E
Page 10 of 21
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 11/21
Page 11 of 21
Pick & Place—”L” StyleAuto-Slide
MODELNUMBER
RODDIA.
STDSTROKE
CYL.BORE A B C D E F G H J K L M N P
AFPPL 3/8 0.38 2.13 0.75 0.75 1.44 0.81 0.50 2.50 3.00 0.25 5.06 6.94 0.75 1.88 0.50 2.88 0.75
AFPPL 1/2 0.50 3.00 1.13 0.88 1.50 0.81 0.63 3.38 4.00 0.31 6.13 8.88 0.75 2.75 0.50 3.88 0.94AFPPL 3/4 0.75 4.00 1.13 1.00 1.50 0.94 0.63 4.25 5.00 0.38 7.13 10.88 0.75 3.38 0.63 4.88 0.94
AFPPLH 3/4 0.75 4.75 1.38 1.00 2.375 0.94 0.75 5.25 6.00 0.38 8.75 13.25 0.75 4.38 0.63 5.88 1.13
MODELNUMBER R S T U V W X Y Z AA BB CC DD EE FF GG HH
AFPPL 3/8 1.00 2.50 0.25 1.50 1.00 0.25 2.25 10-32 10-32 2.50 1.50 0.38 2.25 3.00 0.38 0.50 0.34
AFPPL 1/2 1.38 3.50 0.25 1.50 1.00 0.25 3.00 1/4-20 10-32 3.25 2.00 0.50 3.00 4.00 0.50 0.75 0.34
AFPPL 3/4 1.50 4.50 0.25 1.75 1.25 0.25 3.31 1/4-20 1/4-20 4.00 2.50 0.50 4.00 5.00 0.50 1.00 0.41
AFPPLH 3/4 1.75 5.38 0.31 1.75 1.13 0.31 3.75 1/4-20 5/16-18 5.00 3.38 0.63 4.50 6.00 0.75 1.00 0.53
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 12/21
Cam Operated ShuttleAuto-Slide
The AFCS series of Auto-Slides are constructed of high quality materials and are designed with a rugged vertical drive shaftbetween the guide rods that provides extremely rigid construction. The AFCS unit comes standard with self-aligning ballbearings. This compact unit is available in two sizes and provides mounting for end effector tooling. Application examplesinclude shuttling parts from one conveyor to another and loading parts onto a cleated conveyor.
Model AFCS 3/4 x 6
Model AFCS 1/2 x 4
Page 12 of 21
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 13/21
Cam Operated ShuttleAuto-Slide
The Model AFCS continuous shuttle uses a rotating disk and crank that are attached to the rear endplate. Thesecomponents create a smooth reciprocating motion. The input shaft is supported by dual ball bearings pressed into the mainbody. The crank arm rotates using bearings on hardened pins. Hardened and ground shafts riding in recirculating ballbushing bearings give the shuttle an extremely low coefficient of friction for effortless motion. This shuttle can be poweredby a variety of drive sources such as: gear motor with one revolution clutch, steeping motor, AC or DC servo motor, or geareddirectly from an existing machine. The low cost and high accuracy of this unit makes it an ideal choice for many shuttleapplications.
MODEL
NUMBER
STANDARD
STROKE
MAXIMUM
STROKE
ROD
DIA.A B C D E F G H J K L
AFCS 1/2 2.00 4.00 0.50 0.63 2.75 4.00 1.38 8.50 0.50 3.50 1.75 1.00 0.25 3.00
AFCS 3/4 2.00 6.00 0.75 1.00 4.00 6.00 2.00 12.00 0.75 5.00 2.50 1.50 0.38 4.25
MODELNUMBER M N P R S T U V W X Y Z AA BB
AFCS 1/2 1.50 0.75 1.34 3.00 0.25 1.00 1.38 1.25 4.00 3.50 1/4-20 0.25 0.75 0.19
AFCS 3/4 2.00 1.00 2.09 4.38 0.38 1.25 1.94 2.13 5.88 5.25 5/16-18 0.31 1.00 0.25
Page 13 of 21
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 14/21
Linear Roller SlideAuto-Slide
Our basic Auto-Slide features lightweight aluminum construction in both the center body and the end plates. Recirculatingball bearings are standard. Extra thick felt wipers provide good absorption and distribution of lubricant and eliminate mostforeign matter. These slides can be mounted rigidly in any position by the endplates or the center body.
MODELNUMBER
A B C D E F G H J K L M N P R S T U V W
AFRS 3/8 2.00 1.25 2.00 0.38 1.25 1.00 0.38 2.13 0.19 1.75 0.38 0.75 0.75 0.25 0.50 0.27 5/16-18 #10
AFRS 1/2 3.00 1.50 3.00 0.50 2.00 2.38 0.31 1.13 0.50 2.38 0.19 2.00 0.38 1.00 1.00 0.31 0.63 0.33 3/8-16 #10
AFRS 3/4 4.00 2.00 4.00 0.63 2.75 3.38 0.31 1.63 0.75 3.38 0.25 2.88 0.63 1.50 1.38 0.38 1.00 0.33 3/8-16 1/4
AFRS 1 5.00 2.25 5.00 0.75 3.50 4.25 0.38 2.00 1.00 4.25 0.31 3.63 0.63 2.00 1.75 0.56 1.25 0.42 1/2-13 5/16
Page 14 of 21
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 15/21
Options
AFPRS with Shock Absorber Option(Order Option “S”)
MODEL SHOCKABSORBER
(ENDINE)
A B
AFPRS 3/8 OEM .25B 4.50 1.12
AFPRS 1/2 OEM .25B 4.75 1.12
AFPRS 3/4 OEM .5B 6.50 1.50
AFPRSH 3/4 OEM 1.0B 9.62 1.87
Shock Absorbers (Order Option “S”)
Our air cylinder powered Auto-Slide products are available with adjustable hydraulic shock absorbers. Theseshock absorbers are externally mounted on all slide units for ease of adjustment. These shocks are not intendedto be used as end stops. All Auto-Slides are equipped with adjustable end-of stroke stops. These stops must beset so that the shock absorber does not travel its full stroke and internally bottom its piston, which would causedamage to the shock absorber.
Proximity Sensor (Order Option “P”)
Auto-Slide products are available with proximity sensors to indicate end of travel. The proximity sensors used onthese units are manufactured with high quality stainless steel barrels. 8mm and larger have detachable cords.5mm proximity sensors are available for grippers. 8mm and 12mm proximity sensors are available for slides, bi-directionals, and pick & place units.
REQUIRED PROXIMITY SENSOR SUFFIX
5MM D.C. SINKING P1
5MM D.C. SINKING P2
8MM D.C. SOURCING P3
8MM D.C. SOURCING P4
12MM A.C. P5
Page 15 of 21
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 16/21
Options
AFPRBDwith Adjustable Shock Absorber Option
(Also available on models AFPPV & AFPPL)
AFPRBDWith Proximity Sensor Option
(Also available on models AFPPV, AFPPL, &AFPRS)
Page 16 of 21
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 17/21
Rod Deflection CalculationsAuto-Slide
Information To Calculate Rod Deflection
Rod deflection is calculated by multiplying the weight of the slide and any tooling by the value in the chart shown below.Begin by adding the slide weight from chart #1 below and any additional tooling or supports added to the moving portion ofthe slide. This is the total weight the rods must support. Next, determine the approximate distance between the end platesin the supporting axis of the slide. Find the distance in chart #2 below, find the value listed in that column for the roddiameter of the slide you are using. Now multiply the total slide weight by the value listed in that column for the roddiameter of the slide you are using. Now multiply the total slide weight by the value from chart #2. This is the amount thatthe rods will deflect with the slide centered between the supporting end plates
CHART #1—WEIGHT OF MOVING PART OF SLIDE IN POUNDS
AFRS AFPRS AFPRSWITH
SHOCKS
AFPRBD AFPRBDWITH
SHOCKS
AFPPL AFPPL WITHSHOCKS
AFPPV AFPPVWITH
SHOCKS
3/8 0.3 1.1 1.5 4.7 5.1 4.7 5.1 4.3 4.7
1/2 0.7 2.2 3.3 7.2 8.0 7.2 8.0 6.8 7.6
3/4 2.2 3.5 4.5 9.8 10.6 9.8 10.6 9.3 10.1
H 3/4 5.9 8.1 16.4 18.2 16.4 18.2 16.0 17.8
1 4.0
CHART #2—MULTIPLIER VALUE FOR DEFLECTION CALCULATION
4” 6” 8” 10” 12” 16” 20” 24” 30”
3/8 0.00002 0.00008 0.00019 0.00036 0.00065 0.00154 0.00286 0.00520 0.00965
1/2 0.00003 0.00006 0.00011 0.00020 0.00047 0.00090 0.00157 0.00307
3/4 0.00001 0.00002 0.00004 0.00009 0.00018 0.00031 0.00061
1 0.00001 0.00002 0.00003 0.00006 0.00010 0.00019
EXAMPLE: AFPPL 3/4 Slide, additional #5.8 Tooling, 16” between endplates = (9.8 + 5.8) x 0.00009 = 0.00014” of
deflection
Page 17 of 21
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 18/21
Cylinder Rebuild Kits
STANDARD REBUILD KITS
Standard rebuild kits include the following components: FRONT ENDCAP WITH BUSHINGSROD & ENDCAP O-RINGS
U-CUPS
ALL OF THESE COMPONENTS ARE BUNA.
OPTIONAL REBUILD KITS
Optional rebuild kits include the following components FRONT ENDCAP WITH BUSHINGSROD & ENDCAP O-RINGS
U-CUPS
ALL OF THESE COMPONENTS ARE VITON .
Part Numbers for Ordering Rebuild Kits
All Slides with 1/4” or 3/8”Rods
All Slides with 1/2” or 3/4”Rods
All Heavy Duty 3/4”Slides
Standard 9-0092-20 9-0092-21 9-0092-22
Optional 9-0094-40 9-0092-41 9-0094-42
Page 18 of 21
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 19/21
How To Order Auto-SlideComponents
EXAMPLE #1
Cylinder Powered Linear Slide½” Rods
5” Total StrokeStyle “V” Mounting
Shock Absorber Option
Order: AFPRS ½ x 5 – V – S
EXAMPLE #2
Left Hand AssemblyShock Absorber Option
Order: AFPPVH 3/4 X H14 X V6—L - S
Pick & Place “V” Style3/4” Heavy Duty
14” Horizontal Stroke6” Vertical Stroke
EXAMPLE #3
Cylinder Powered Bi-Directional Slide With:¾” Rods
7” Horizontal Stroke4” Vertical Stroke
8mm D.C. Sinking Proximity Sensor Option
Order: AFPRBD ¾ x H7 x V4 – P3
Page 19 of 21
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 20/21
P.O. Number: Date:
Bill To: Ship To:Accounts Receivables
January 1, 2003
Your Company
automatic feeder company inc.
Your Company
123 Your Street, P.O. Box ABC
Your
Your PO #ABC123
123 Your Street, P.O. Box ABC
Your Town, State Zipcode
921 Albion AvenueSchaumburg, IL 60193-4550
(847) 534-2300 - Fax: (847) 534-2354E-Mail: [email protected]
Town, State Zipcode
Placed By: Your Name Attn:
Phone No.: 555-555-5555 Fax No.: 555-555-5555
*AFPRBD, AFPPL & AFPPV Slides Require 2 Stroke Dimensions (One for Horizontal Stroke, One for Vertical Stroke)
FOR MODIFIED SLIDES AND/OR SPECIAL END PLATES, PLEASE FAX US A COPY OF THE SLIDE FROM THECATALOG WITH MODIFICATIONS NOTED ON THE PAGE.
Part Number Qty End PlateDescription Stroke Length* Options
1 VAFPRS 1/2 S, P4 1/2
1 H-3 1/8 x V-2 1/2AFPRBDH 3/4
9-0092-22 3 Rebuild Kit
Additional Information:
Del. Requested: Best Way
UPS Red
UPS Collect
Check Fed-Ex
Credit Card Fed-Ex Collect
Name Other
CC #
Exp Date Mar-03
Shipping Instructions:
Card Holder Name
4444-4444-4444-4444
January 12, 2003
UPS Ground
Payment Details
8/9/2019 ASCatalog Web
http://slidepdf.com/reader/full/ascatalog-web 21/21
automatic feeder company inc.
921 Albion AvenueSchaumburg, IL 60193-4550
(847) 534-2300 - Fax: (847) 534-2354E-Mail: [email protected]
P.O. Number: Date:
Bill To: Ship To:
Placed By: Attn:
Phone No.: Fax No.:
Part Number Qty End PlateDescription Stroke Length* Options
*AFPRBD, AFPPL & AFPPV Slides Require 2 Stroke Dimensions (One for Horizontal Stroke, One for Vertical Stroke)
FOR MODIFIED SLIDES AND/OR SPECIAL END PLATES,PLEASE FAX US A COPY OF THE SLIDE FROM THECATALOG WITH MODIFICATIONS NOTED ON THE PAGE.
Additional Information:
Del. Requested: Shipping Instructions: Best Way
Check
Credit Card
Name
CC #
Exp Date
Payment DetailsUPS Ground
UPS Red
UPS Collect
Fed-Ex
Fed-Ex Collect
Other