syndaver ekg simulator bluetooth connection procedure 1. go
Post on 19-Jan-2017
220 Views
Preview:
TRANSCRIPT
SynDaver EKG Simulator Bluetooth Connection Procedure
1. Go into android system settings and select Bluetooth.
2. Within the Bluetooth menu pair your two android devices.
3. Open the SynDaver EKG Simulator App on both devices.
4. Enter the control page on the device you would like to control with and check the instructor mode box.
5. On the display device click the Bluetooth icon in the upper right corner and select the control device you set as
instructor in the previous step.
Nexus 7 (Display Tablet)
Make device visible to other devices
Click the button to scan for devices
Galaxy Tab 4 (Control Tablet)
Make device visible to other devices
Click the button to scan for devices
Once the device appears under available devices touch it to connect both
devices should then have a pairing request box which you will have to
confirm on both devices
Open the app on both devices
Once the device appears under available devices touch it to connect both
devices should then have a pairing request box which you will have to
confirm on both devices
On the control device touch the gear icon in the lower right corner
On the control device click the instructor mode box
If the connection between the devices is lost accidently the instructor mode checkbox must be cleared and rechecked on
the control device then click the Bluetooth connection and reselect the control device from the display device.
Click the Bluetooth icon in the top right corner on the display tablet then
select the control device to connect
When the display is paired with the control the Bluetooth icon will turn
blue to indicate a connection
In instructor mode the save button turns into send after making
changes press send to send them to the display device
top related