source: ec.europa.eu/cemarking ce marking makes europe’s market yours!
Post on 23-Dec-2015
214 Views
Preview:
TRANSCRIPT
Source: ec.europa.eu/CEmarking
CE marking makesEurope’s market yours!
What is CE marking?
Source: ec.europa.eu/CEmarking
CE marking is a key indicator of a product’s• compliance with EU legislation and• enables the free movement of products within the European market.
What is CE marking?
Source: ec.europa.eu/CEmarking
By affixing the CE marking on a product,a manufacturer is declaring,
on his sole responsibility, conformity with all of the legal requirements to achieve CE markingand therefore ensuring validity for that product to be sold throughout the European Economic Area
What is CE marking?
Source: ec.europa.eu/CEmarking
CE marking does not indicate that a product was made in the EEA, but merely states that the product is assessed before being placed on the market and thus satisfies the legislative requirements (e.g. a harmonised level of safety) to be sold there.
What is CE marking?
Source: ec.europa.eu/CEmarking
• The manufacturer has verified that the product complies with all relevant essential requirements, or
• if it is necessary it examined by a notified conformity assessment body.
6 steps for CE marking
Source: ec.europa.eu/CEmarking
STEP 1 Identify the directive(s) and harmonised standards applicable to the product
Source: ec.europa.eu/CEmarking
• There are more than 20 directives setting out the product categories requiring CE marking.
• The essential requirements that products have to fulfil (e.g. safety) are harmonised at EU level and are set out in general terms in these directives.
Source: ec.europa.eu/CEmarking
• Electrical Safety: Low Voltage Directive• Electromagnetic Compatibility (EMC)• Low Voltage Directive (LVD) 2006/95/EC• Electromagnetic Compatibility (EMC)
Legislation: Directive 2004/108/EC
STEP 1 Identify the directive(s) and harmonised standards applicable to the product
Source: ec.europa.eu/CEmarking
The Low Voltage Directive is one of the oldest directive It characterises both with a• conformity assessment procedure applied
to equipment before placing on the Market and with
• Essential Health and Safety Requirements (EHSRs) which such equipment must meet either directly or by means of harmonised standards.
STEP 1 Identify the directive(s) and harmonised standards applicable to the product
STEP 2 – Verify the product-specific requirements
Source: ec.europa.eu/CEmarking
It is up to you to ensure that your productcomplies with the essential requirements ofthe relevant EU legislation. Full complianceof a product to the harmonised standardsgives a product the “presumption of conformity” with the relevant essential requirements.
STEP 3 – independent conformity assessment
Source: ec.europa.eu/CEmarking
Each directive covering your product specifies whether an authorised third party (Notified Body) must be involved in the conformity assessment procedure necessaryfor CE marking.This is not obligatory for all products, so it isimportant to check whether the involvement of a Notified Body is indeed required.
STEP 4 – Test
Source: ec.europa.eu/CEmarking
Testing the product and checking its conformity to the EU legislation (Conformity Assessment Procedure) is the responsibility of the manufacturer.One part of the procedure is, as a general rule, a risk assessment. By applying the relevant harmonised European standards, you will be able to fulfil the essential legislative requirements of the directives.
STEP 5- Technical documentation
Source: ec.europa.eu/CEmarking
The manufacturer has to establish the technical documentation required by the directive(s) for the assessment of the product’s conformity to the relevant requirements, and for the risk assessment.
STEP 6- Affixation of the CE marking
Source: ec.europa.eu/CEmarking
The CE marking must be affixed by the manufacturerIt must be affixed according to its legal format visibly, legibly and indelibly to the product or its data plate. If a Notified Body was involved in the production control phase, its identification number must also be displayed.
ROHS
Source: ec.europa.eu/CEmarking
ROHS
Source: ec.europa.eu/CEmarking
The RoHS directive aims to restrict certain dangerous substances commonly used in electronic and electronic equipment.
ROHS
Source: ec.europa.eu/CEmarking
RoHS specifies maximum levels for the following six restricted materials:Lead (Pb): < 1000 ppmMercury (Hg): < 100 ppmCadmium (Cd): < 100 ppmHexavalent Chromium: (Cr VI) < 1000 ppmPolybrominated Biphenyls (PBB): < 1000 ppmPolybrominated Diphenyl Ethers (PBDE): < 1000 ppm
ROHS
Source: ec.europa.eu/CEmarking
Any RoHS compliant component must have 100 ppm or less of mercury and the mercury must not have been intentionally added to the component. In the EU, some military and medical equipment are exempt from RoHS compliance.
Ready
Source: ec.europa.eu/CEmarking
Your CE-marked product is ready for the market.
top related