mod 7,8
Post on 10-May-2015
824 Views
Preview:
DESCRIPTION
TRANSCRIPT
MOD -7(ME)
MARKET STRCTURE
What are Markets? The market may be in one specific place.
A market is where buyers and sellers:
meet to exchange goods and services
usually in exchange for money
ESSENTIALS OF MARKET
Commodity for transaction
Network of buyers & sellers
Competition between buyers & sellers
A place or a situation for transaction
TYPES OF MARKET
Perfect competition
Monopolistic competition
Monopoly
Oligopoly
PERFECT COMPETITION:CONDITIONS
Large number of buyers and sellers in the market, no one of them can influence price
Homogeneous goods
Free Entry & Exit of firms
Perfect knowledge of the market
Perfect mobility of factors of production
Non-intervention of government
No transport cost difference
Perfectly elastic demand curve
Closest example is a fruit and vegetable market
WHAT IS NORMAL & SUPER NORMAL PROFIT?
Normal profit- minimum level of profits in order to stay in business
supernormal profits – profits over and above normal profits.
SHORT RUN EQUILBRIUM-Perfect Competition:
Under perfect competition, there is a single ruling market price- the equilibrium price,
determined by the interaction of forces of total demand and total supply
However, in the short run a perfectly competitive firm may earn super normal profit,
or normal profit or can incur losses depending upon the positions of the short run cost
curves.
PRICE DISCIRIMINATION
Monopoly firms –sole objective of earning maximum profits may charge uniform
price or different prices for their products to different customers.
The practice of selling the same commodity at different prices to different buyers is
called price discrimination.
Ex: A book seller selling the same edition of a book in an ordinary cover at Rs. 25 and
with deluxe cover at Rs. 50 and others. Then he is said to be discriminating.
TYPES OF DISCRIMINATION
1. Personal discrimination-Monopolist may charge different prices on the basis of
their income. E.g. Doctors & Lawyers.
2. Place discrimination: different prices for the same commodity in different
regions or localities. E.g. Provision of door to door delivery, drive in facility
in restaurants
Dumping in domestic & foreign markets.
3. Use of trade Discrimination: different prices for different types of uses of the
same commodity.
E.g. Electricity sold at cheaper rate for agricultural purposes and higher rate for
industrial purposes.
4. Age discrimination: On the basis of age of the customers.Buyers below 12 years
of age are charged. Half rates in transport services.
5. Sex discrimination: Some touring agents may provide seats at concessional rate
to the ladies.
6. Size discrimination: price in the retail market is higher than the price in the
whole sale market. Small size toothpaste is dearer relatively then the economy
size toothpaste.
7. Quality variation discrimination: in the form of material used , the nature of
packing, colour, style etc.,
MONOPOLY
A market structure in which only one Producer or seller exists for a Product that has no
close substitutes.
Public utility services like water supply and electricity
Monopolistic competition- is a market structure in which a large number of small sellers
sell differentiated products which are close, but not perfect substitutes for one another.
EXAMPLE: Tooth paste, Blades, Motor cycle & bicycle, Cigarettes, cosmetics, biscuits,
soaps, and detergents, shoes, Ice-creams etc.,
FEATURES OF MONOPOLY.
1. Many firms : each firm contributes only a small portion of the total output & has a
limited control over the price of the product
2. Independent price policy: firms produce different products which are close
substitutes & price is determined considering cost of production & demand.
3. Product differentiation: each firm tries to differentiate its product from that of other
rivals in one way or other.
4. Single seller : There is single producer under Monopoly . So monopoly firm and
industry are identical.
5. No substitutes : There are no close substitutes for the product of monopolist.
6. Absence of competition : There is no competition for a monopolist product as he is
the only seller ruling the market.
7. Price maker : A monopolist is a price maker and not price-taker. He can fix his own
price policy and maximize profit.
8. Inelastic demand curve : A monopoly firm faces a downward slopping demand
curve.
9. No free entry and exit : The monopolist has no immediate rivals due to barriers
which block the entry of new firms. Firm can only earn normal profits.
10. Selling cost : cost on Advertisements & selling mediums in order to popularize their
brand in the market.
11. Lack of perfect knowledge : large no. of products each being substitute of the other.
Seller does not know the exact preference of buyers and hence he cannot get any
added advantage out of the situation.
12. Lack of mobility of factors : Factors of production and goods and services are not
perfectly mobile under MPC.
13. More elastic demand : MPC have more elastic demand curve i.e if the firm wants to
sell more, it must reduce its price.
TYPES OF MONOPOLY
1. Natural Monopoly: such monopoly arises due \to endowment of resources by nature.
Natural advantages such as climatic condition, good location, availability of certain
minerals etc. creates natural monopoly.
2. Legal Monopoly: It is also known as statutory monopoly. It is given by law.
3. Pure Monopoly: It is a market in which there is single seller & large number of
buyers. It is compete negations of competition.
4. Limited Monopoly: When there are few sellers & large number of buyers then limited
monopoly exist.
5. Public Monopoly : When monopoly is firm is owned , managed & controlled by
government then it is called as public monopoly.
6. Simple Monopoly: when monopoly charges same price for his commodity from all
buyers in the market then it is called as simple monopoly.
PRICING UNDER MONOPOLISTIC COMPETITION – SHORT RUN
o A firm under monopolistic competition is a price maker.
o The firm has to determine a suitable price for its product which yields a maximum
revenue.
o In order to maximize its total profit or minimize its losses in the short run, the firm
produces that level of output at which marginal cost is equal to marginal revenue(i.e
MC=MR) thus equilibrium is determined at the point of intersection of the MC curve
and the MR curve .
MR =MC intersects each other at output. At output OQ shows equilibrium level of output. In
this situation price to be determined will be QR or OP. SAC at this output level is QC or OD.
Therefore DP supernormal profit DPXOQ = area of rectangle DPRC.
PRICING UNDER MONOPOLISTIC COMPETITION- LONG RUN
Firms in the short run earn super normal profits in a monopolistically competitive market,
some new firms will be attracted to enter the business, as the group is open.
On accounts of rival’s entry the demand curve faced by the typical firm will shift to the origin
and it will also tend to be more elastic, as its share in the total market is reduced due to
competition from an increasing No. of close substitutes.
In the long run equilibrium when AR=AC. AR is tangent the average cost curve LAC at R.
Therefore, the equilibrium output in the long run is OQ and the corresponding price is QR or
OP. At this point Average cost is also QR and so is average revenue. Therefore there is no
supernormal profits: only normal profits which forms cost of production
Why firm is required to attain equilibrium ?
To Stay in business.
Equilibrium of firm requires equality of MR with MC.
MC=MR
PRODUCT DIFFERENTIATION
Product differentiation is the glaring feature of monopolistic competition.
Firms adopt different technique to differentiate their products from one another.
There are many ways of making products different from one another.
Branding – most common & essential aspect of unique identification of the product.
Ex: IFB washing machine, Sony music system.
Product differentiation may take mainly two forms:
A) Real Product Difference:
Quality: when products are produced out of materials of higher quality & durability.
When they are extraordinary on the basis of workmanship, color, design size, shape, style,
fragrance etc.,
When personal care is taken to produce it.
B) Imaginary Product Difference:
Producers adopt different methods to differentiate their products from that of close substitutes
in the following manner.
Proper allocation of sales depots in busy commercial
Depots
Selling goods under different trade marks
different brands and packing them in attractive
wrappers or containers.
Working hours convenient customers.
Courteous treatment to customers and developing friendly relations with them
Offering gifts, discounts, guarantee of repairs & other free services, sales on credit, or
credit cards.
Agreement to take back goods if they are unsatisfactory. Air-conditioned stores etc.,
OLIGOPOLY
In economics, a situation in which few companies control the major part of a particular
market ………
The term Oligopoly is derived from two greek words “Oligos” means a few and “Poly”
means to sell.
Oligopoly is market situation with a few sellers (more than two) each selling either
homogeneous or hetergenous (differentiated products)
This type of markets are characterized by a few sellers where each one or at least one of them
commands a significant portion of the total supply of the product in the market.
E.g. Oligopolistic industries in the Indian context are automobile, steel Cement,
cigarettes, soaps and detergents.
FEATURES:
1. Small no of Large sellers
2. Interdependence
3. Advertising and selling costs
4. Conflict or collude attitude of the firms
5. Under oligopoly new entry is difficult. It is neither free nor barred.
6. Lack of uniformity in size of the firm is another feature of oligopoly
Small Number of Firms
In contrast to monopolistic competition and perfect competition, an oligopoly consists of a
small number of firms.
Each firm has a large market share
The firms are interdependent
The firms have an incentive to collude
Examples of oligopoly
Supermarkets
Banking industry
Chemicals
Oil
Medicinal drugs
Broadcasting
Interdependence: Each firm has to be conscious of the reactions of its rivals, since the no. of
firms are very few, any change in price, output, product etc., by one firm will have direct
effect on the policy of other firm.
Importance of advt & selling cost
In oligopoly different firms have to employ various aggressive and defensive
marketing weapons to gain a greater share in the market.
It is only under oligopoly that advertisement comes fully into its own
FEATURES OF OLIGOPOLY
Conflict or collude attitude of the firms:
Firms may realize the disadvantages of competition & rivalry and desire to unite
together to maximise their profits.
On the other hand firms guided by individualistic considerations may continuously
come in clash and conflict with another.
This creates uncertainty in the market.
OUTPUT DECISIONS UNDER OLIGOPOLY
As the action and reaction affect one fortune, the oligopoly firms have no alternative
but to react to the actions of the competitors.
There are several approaches to determine the price and output by oligopoly firms:
Approaches to determine the price & the output –oligopoly
Three important approaches to determine the output by oligopoly firms;
1. Collusions or agreements (CARTELS)
2. Kinked Demand curve
3. Price leadership
CARTELS
Collusion is just opposite of competition.
The term collusion means to “play together” in economics. .
It means that firms co-operate with each other in taking joint actions to keep their
bargaining position stronger against the consumer.
Collusion- bases on their oral or written agreements.
Collusion based on oral agreements leads to the creation of what is called as
“gentleman’s agreements” it does not consist of any record.
Collusion based written agreements creates what is know as CARTELS
Centralized cartels: Firms surrender all their rights to a central authority which sets
prices, determine output, quotas for each firm, distributes profits.
Objective; Maximises Joint profits, hence cartel acts as a monopolist.
Market sharing cartels: have restrictive assumptions of identical costs for all firms.
Practically firms hv. Unequal costs and every firms want to have some dgree of
independent action.
Therefore Market sharing is short lived.
PRICE LEADERSHIP
Mutual suspicion and distrust among member firms and their unwillingness to
surrender all their sovereignty makes the collusion imperfect.
Price leadership: A strong firms which is enjoying the benefits of large scale
production will dominate the small firms.
The price fixed by the dominating firms will be followed by all other small firms.
Hence, the dominating firm becomes the price leader.
All other firms following the price policy of the dominating firm in the industry are
called as price followers.
KINKED DEMAND CURVE MODEL
KDC- first used by Prof. M. Sweezey to explain price rigidity under oligopoly.
It represents the behaviour of Oligopoly firm which has not incentive either to
increase or decrease its price.
In this model, the firm is afraid to change its price.
Look at logic of the model.
Consequences of raising price
Consequences of lowering price
PRICING
Price denotes two aspects: it is revenue to the seller and its is the perceived value of
the good (or service) to the buyer. It determines sales revenue, market share and
profits.
Pricing decisions are more important for a new product and an existing product.
Among various pricing strategies cost plus pricing (Full cost pricing) is one in which
price of the product is the sum of cost plus a profit margin.
FULL COST PRICING
VIK Technologies has invested Rs. 10 crore in plant and machinery, with a capacity to
produce 10,000 units of television per month. Total variable cost is estimated at Rs. 5 crore
and the firm expects a return of 20% on total investment. What should be the price of TV if
we suppose that the firm can sell its entire output?
Solution:
Base price = TC = 10 + 5 = Rs. 15 crore
Margin = 20% of 15 = 3 crore
Total revenue = 15 +3 = 18 crore
Price = 18,00,00,000/10000= Rs. 18,000 per TV
This method of pricing is very simple & convenient.
But not suitable when competition is tough or when a new firm is trying to enter new market.
For a long time Indian Co’s used cost plus Or full cost pricing
PRODUCT LINE PRICING
Pricing different products within the same product range at different price points.
An example would be the video manufacturer offering different video recorders with
different features at different prices.
NEW PRODUCT PRICING STRATEGIES
The management can choose between two broad strategies:
1. Market-Skimming Pricing
2. Market-Penetration Pricing
Market-Skimming Pricing :
Market-Skimming Pricing Skim means to take the cream. In this strategy the
company initially sets high prices to skim revenues layer by layer from the market. It means
when the price of the new product would be higher only some segments of the market would
adopt the product at a high price.
Market-Skimming Pricing Layer by layer means different layers of customers.
Initially when the prices are high only some segments purchase the product, giving revenue
to the company from customers who cant wait until the prices get low. With initial sales
going down and competitors threaten to introduce similar products, the company lowers the
price to attract the price-sensitive layer of customers. In this way the company skims a
maximum amount of revenue from the various segments / layers of the market. Market Giant
Intel uses this strategy.
Market Skimming Feasibility :
Market Skimming Feasibility This strategy is feasible only under certain conditions : The
product’s quality and image must support its higher price. Enough buyers must want the
product at higher price. Cost of producing a smaller volume cannot be so high that they
cancel the advantage of charging more. Competitors should not enter the market because they
would undercut the high price.
Market – Penetration Pricing :
Market – Penetration Pricing It means setting a low price for a new product in order to
attract a large number of buyers and a large market share. Some companies set a low initial
price in order to penetrate the market quickly. The high sales volume results in falling costs
which allows the company to reduce its price even further. Dell used this strategy to enter the
personal computer market. Walmart & other discount retailers also use this strategy.
Pre-Requisites For Market Penetration Pricing :
Pre-Requisites for Market Penetration Pricing This strategy works only under these
conditions: The market must be highly price sensitive. A low price should produce more
market growth. Production & distribution costs must fall with the increase in the sales
volume. Lastly the low price must keep out the competitors. And the company adopting this
strategy should maintain its low price position in order to achieve permanent or long term
price advantage.
MOD -8 (M.E)
PROFIT
P- percentage of return on capital.
R- reward for taking risks in business.
O- owners motive.
F- fair remuneration.
I- Innovation & creativity
T- Technology
Profit = Total revenue – total cost
Profit means different things for different people
Wages- labor
Rent- owners
Interest- money lenders
It is a motive force of a business undertaking.
The objective of any firm is to maximize profit.
NATURE OF PROFIT
¤ Reward for the service of the entrepreneur
¤ Price or remuneration paid for the management.
¤ Reward for the ownership of capital.
¤ Percentage of return on capital invested.
¤ Difference between total revenue and total cost.
¤ Reward for taking risk in business.
¤ Residual income of to entrepreneur after paying remuneration to all factors.
PROFIT – MEASUREMENT
1. Gross profit & Net profit
2. Normal profit & Super normal profit
3. Optimum profit & Maximum profit
4. Accounting Profit & Economic profit
1. Gross profit & Net profit
GP- refers to the total profits earned by an enterprise.
Gross profit=Total revenue-Total Explicit costs
It is the excess of income after meeting all kinds of actual or explicit costs.
Net profit- refers to the income received by the enterprise after all factors of production
including those contributed by the organizer himself are paid off.
NP= Total revenue – Total cost.
2. Normal Profit & supernormal profit
Normal profit is the minimum amount necessary to induce an entrepreneur to remain and
work in the business.
Supernormal Profit – is the excess of income over and above normal profit.
Total production = 10,000 units
TPC detail - Rent – 10,000/-
Wages - 20,000/-
Interest - 10,000/-
Profit - 10,000/-
50,000/-
Cost per unit = Rs.50,000/10000=Rs.5/-(consists of Rs.1/-rent, 2/-,wages,
1/- interest & Rs.1/- profit)
Rs 1/- is normal profit which is includes in production cost.
If the seller is selling the product at the rate of Rs.8/- in that case, he
Earns a supernormal profit of Rs. 3/- (8/- minus 5/- = 3/-)
Market price – Production cost per unit = SNP
8.00 5.00 = 3.00
3. Optimum profit & Maximum profit
The term “OP’ refers to the most ideal or most desirable level of profit earned by a business
unit.
But there is no yardstick to indicate the ideal level of profit.
It is relative concept and change with the time.
Maximum Profit: refers to the highest possible profit that may be earned by a firm.
4. Accounting Profit & Economic Profit
Accounting Profit: To an accountant , profit is the excess of revenue receipts over the total
explicit cost incurred in generating this Revenue.
Economic Profit: Accounting profit – Implicit costs
Ex: Imputed costs like entrepreneurs wages, rental income, self owned land, interests on self
capital from accounting profit can be called as economic profit.
DETERMINANTS OF SHORT TERM PROFIT
Firms aim at maximizing short run profits.
Elasticity of demand for the product
Annual objectives
Financial objectives
Seasonal demand
DETERMINANTS OF LONG TERM PROFIT
Firms aim at maximizing long run profits.
Prevention of potential competition
Attainment of industry leadership
Prevention of Government intervention
Maintenance of consumer good will
Strategic objectives of the firm
BREAK EVEN ANALYSIS
BEA- economic tool in the hands of business policy makers, for profit planning &
forecasting.
Acc. Marz, Curry & Frank – BEA indicates at what level cost & revenue are in equilibrium.
The main objective of BEA is to trace the relationship between Cost, price & revenue
Significance of BEA:
B- Business Decision Making
E- Economic Research
A- Analysis for Investment
Meaning of break-Even Analysis
BEA- indicates where profit starts, the area of loss & profits , Margin of safety &
optimum level of operation etc.,
In Break-Even Analysis, the break-even point is located at that level of output at
which the net income or profit is zero. At this point, total cost is equal to total
revenue. Hence, the break-even point is the no-profit-no-loss zone.
ASSUMPTIONS OF BREAK-EVEN ANALYSIS
The cost function and the revenue function are linear.
The total cost is divided into fixed and variable costs.
The selling price is constant.
The volume of sales and the volume of production are identical.
Average and marginal productivity of factors are constant.
The product-mix is stable in the case of a multi-product firm.
Factor price is constant.
THE BREAK-EVEN CHART
Break even chart – accepted by business economists, Co. executives, Investment analysts,
Govt. agencies & even trade unions.
Break-even Analysis is essentially cost volume profit analysis(CVPA).
It is an analytical tool for tracing relationships among key business such as costs, revenues
and profits at different output levels.
TR = total revenue
TC = total cost
TFC = total fixed cost
The break-even point (B) is the point at which TR = TC
Profit is zero at OQ level of output.
How to calculate BEP in terms of physical units?
Suppose the fixed costs of a factory are Rs.10,000 per year, the variable costs are Rs. 2.00 per
unit and the selling price is Rs. 4.00 per unit. The Break even point would be
Formula :
BEP = TFC/SP-VC TFC=10,000/-
BEP= 10000 /4-2 SP = 4.00/- per unit
VC= 2.00/- per unit
BEP= 10000 / 4 - 2 = 5,000 units
Now the BEP in terms of physical unit will be 5,000 units.
BEP-in terms of sales value
Multiproduct firms cannot calculate BEP in terms of Physical units of a particular product
because total fixed costs are the same for several products even though total variable costs
change.
It is convenient to calculate their BEP in terms to total sales value expressed in rupees.
Here, again the breakeven point would be the point where the contribution margin (sales
value - variable costs) would equal the fixed costs.
The contribution margin is expressed as a ration to sales.
Ex: sales are 200 and the variable costs of these sales is Rs.140/-
The contribution margin ration is 200-140
LIMITATION OF BEA :-
It is Static.
It is Unrealistic.
It has many shortcomings.
Its scope is limited to the short run only.
It Assumes Horizontal Demand Curve with the given Price of the Product.
It is Difficult to Handle Selling Costs in the BEA.
The Traditional BEA is Very Simple.
USEFULNESS OF BEA
1. The BEA provides microscopic view of the profit structure of the firm.
2 Empirical cost functions required in BEA can be of great help for cost control in
business.
3. The BEA can be used for determining the ‘safety margin’ regarding the extent to which
the firm can permit a decline in sales without causing losses.
Sales - BEP
Safety Margin = X 100
Sales
It is useful in arriving at make or buy decision.
4. The BEA can be useful in determining the target profit sales volume.
TFC – Target Profit
Target Sales Volume = Contribution Margin
5. BEA is highly significant in business decision making prtaining to pricing policy, Sales
Projection, Capital Budgeting etc.,
However, this technique is to be used cautiously.
SAFETY MARGIN
“Safety Margin” associates with the proposed volume. The safety margin refers to the extent
to which the firm can afford a decline in sales before it starts incurring losses.
Safety Margin = sales-BEP/sales X100
Sales=8,000
BEP=5000units
SM=8000-5000/8000X100
=37.5%
It reveals minimum extent of sales effort expected of the management.
PROBLEM
top related