architectural shelters canopies and cycle shelters[1]
Post on 07-Apr-2018
239 Views
Preview:
TRANSCRIPT
-
8/3/2019 Architectural Shelters Canopies and Cycle Shelters[1]
1/9
www.furniture4streets.com
Architectural Street Furniture
Shelters, Canopies and Cycle Shelters
-
8/3/2019 Architectural Shelters Canopies and Cycle Shelters[1]
2/965
Heritage Waiting Shelter
-
8/3/2019 Architectural Shelters Canopies and Cycle Shelters[1]
3/966
Tel: 01253 600415
Fax: 01253 792558
e-mail: wa@glasdon-uk.co.uk
web: www.glasdon.com
Traditional style for traditional locations.
Heritage Shelters, with a decorative gold reliefmouldings to the panels, are the ideal choice wherea more traditional style is required. Manufacturedfrom low-maintenance materials, the HeritageShelter offers a high degree of corrosion resistanceas well as eliminating routine painting requirements.The shelters are available in various models with
different configurations. They are delivered pre-assembled to allow prompt and simple installation.
MaterialsFramework: Vertical 50 x 50mm aluminium section.Horizontal 38 x 38mm aluminium section.
Roof: Comprising of 33mm thick composite panel withpre-finished steel internal face and GRP over-roof.
Glazed Panels: Standard choice of:6mm toughened glass.6mm clear high-impact thermoplastic sheet.
Alternative Glazing: Tinted or textured glass & high-impact thermoplastic sheet is avai lable to special order.
Blank Panels: 6mm GRP with textured internal faceand smooth semi-gloss external face with decorativemoulding.
Timetable Board: Polyester powder-coated aluminiumcase. Display area measures 720 x 270mm.
InstallationThe Heritage Shelter is supplied with adjustablespigoted legs to enable them to be either base fixed orset into concrete pockets.
ColoursFramework: Polyester powder-coating in a choice of:
Maroon RAL 3003Black RAL 9005Dark Green RAL 6005Dark Blue RAL 5003
Roof:Alaska Grey (RAL 7000) to internal face and Light Grey(BS 4800 [18.B.25]) to external face.
Blank Panels: Choice of:Maroon RAL 3003Black RAL 9005Dark Green RAL 6005Dark Blue RAL 5003
Decorative moulding highlighted in gold.
Seat: Choice of:Maroon RAL 3003Black RAL 9005Dark Green RAL 6005Dark Blue RAL 5003Grey BS 4800 (18.B.25)
Timetable Board: Black case
2884
3635 1505
3245 1115
* The above configuration is shown as an example. To discuss your requirements please telephone our sales office.
-
8/3/2019 Architectural Shelters Canopies and Cycle Shelters[1]
4/967
Carleton Canopy
Tel: 01253 600415
Fax: 01253 792558
e-mail: wa@glasdon-uk.co.uk
web: www.glasdon.com
Contemporary styled, curved design.
Carleton Canopies are contemporary-styled anddesigned to provide partial shelter from the weatherin designated outdoor areas. It is available inthree models of lengths: 1400mm, 2800mm and4200mm. The framework is manufactured in 100%recycled cast aluminium with high quality coatingfor low maintenance and long-term durability.
Carleton Canopy has a curved design to help naturalfall-off of rain and snow.
MaterialsCast ends: Recycled cast aluminium with Armorteccoating.Connector tubes: Aluminium extrusion with Armorteccoating.Roof: Twin-walled thermoplastic sheet.
SpecifcationsModel 1400 Model 2800 Model 4200
Length: 1400mm 2800mm 4200mmWidth: 981mm 981mm 981mmDepth: 385mm 385mm 385mmWeight: 24kg 41kg 58kg
InstallationCarleton Canopies are supplied with wall fixingssuitable for general brickwork that is in good condition.Fixing must be carried out by a competent person.Please note that due to the various forms of wallmaterials and construction available, it is recommendedthat professional advice is sought should any doubtexist regarding fixing arrangements.
ColoursCast ends: SilverConnector tubes: SilverRoof: Bronze tinted
1400 981
2800 981
4200 981
385
385
385
Model 1400
Model 2800
Model 4200
-
8/3/2019 Architectural Shelters Canopies and Cycle Shelters[1]
5/968
Tel: 01253 600415
Fax: 01253 792558
e-mail: wa@glasdon-uk.co.uk
web: www.glasdon.com
Eclipse Canopy
Tough, long-lasting one-piece moulding.
The Eclipse Canopy is a simple and stylishone-piece moulding that offers partial weather-protection. Its curved design helps natural fall-offof rain and snow. It is manufactured using toughDurapol material and is available in a choice offour standard colours. The canopy can be wall orpost-mounted, and sited either side-by-side or back-
to-back to create an ideal designated congregationarea for your environment.
MaterialsCanopy: Durapol.Mounting Posts: Armortec coated mild steel.
SpecifcationsLength: 1400mmWidth: 1000mmDepth: 450mmWeight:
Canopy: 17kgSurface mounted posts back-to-back: 26kgSurface mounted posts single: 21kgConcrete-in posts back-to-back: 27kgConcrete-in posts single: 20kg
Recommended height to the top of unit above ground
is 2455mm
InstallationWe supply standard tamper-proof fixings suitablefor general brickwork, which is in good condition.However, we strongly recommend that a survey of thewall area is carried out prior to installation. Fixing mustbe carried out by a competent person.Concrete-in posts are available as an optional extra.Surface-mounting posts are available as an optionalextra.
ColoursCanopy:
Black Sandstone
Millstone Whitestone
(Black contains recycled material and all colours arerecyclable after the products usable life.)
2455
1400 1000
29
2050
450
2005
500
Wall-mounted Single CanopyPost-mounted Single Canopy
-
8/3/2019 Architectural Shelters Canopies and Cycle Shelters[1]
6/969
Bi-Port Cycle Shelter
Attractive modern appearance.
Strong and robust design.
-
8/3/2019 Architectural Shelters Canopies and Cycle Shelters[1]
7/970
Tel: 01253 600415
Fax: 01253 792558
e-mail: wa@glasdon-uk.co.uk
web: www.glasdon.com
Contemporary design for modern developments.
Bi-Port Shelters offer the ultimate in contemporarydesign and are ideally suited to front of houseand high profile locations. The impressive steelframework is post-finished with an Armorteccoating. The end result is a gloss coating thatmaintains its pristine look over many years andhelps to prevent corrosion. Bi-Port Shelters are
delivered in assembled form for installation by thecustomer.
MaterialsFramework: Armortec coated steel.Cladding: Plastic-coated steel profiled, hot-dippedgalvanised steel panels with an embossed plasticcoating to the weather-face and a protective paintfinish to the reverse-face.Thermoplastic 4mm high-impact thermoplasticglazing. Protects against UVA and UVB radiation.
InstallationBi-Port Shelters are supplied ready for immediatesurface fixing on to concrete using the expandinganchor bolts provided.The minimum base size required is 4000 x 2400. Theprepared concrete base should be flat, level and a
minimum thickness of 200mm on to hardcore.
ColoursFramework:
Grey BS 4800 (00.A.09)Green RAL 6005Red RAL 3020Black RAL 9005
(Alternative colours are available upon request.)
Cladding:Plastic-coated steel. The weather-face is available in achoice of:
Nearest equivalentPoppy Red BS 4800 (04.E.53)Ocean Blue BS 4800 (18.C.39)Vandyke Brown BS 4800 (08.B.29)Goosewing Grey BS 4800 (10.A.05)
(Alternative colours are available upon request.)Thermoplastic: Clear.
876
2585
3825
2585
750
1870
-
8/3/2019 Architectural Shelters Canopies and Cycle Shelters[1]
8/971
Tel: 01253 600415
Fax: 01253 792558
e-mail: wa@glasdon-uk.co.uk
web: www.glasdon.com
CyclePad Cycle Stand
Relocatable Bicycle Stands.
CyclePad is a Registered EU Design.
CyclePad offers a revolutionary design whichreduces the time and cost of site installationto the absolute minimum. It is suited to streetfurniture applications because there is no needto excavate and re-lay existing ground surfacessuch as blockpaving or concrete. Each CyclePadis manufactured and delivered to site as a ready-
made freestanding concrete plinth complete with asingle hoop in stainless steel or Armortec coatedsteel. The contoured shape of the concrete plinthallows each CyclePad to be easily manoeuvredand interlinked together in a continuous line toform your desired layout. Manufactured from highquality and maintenance-free materials, CyclePadwill provide years of trouble-free service.
MaterialsHoop: 50mm tubular stainless steel (316 grade) orArmortec coated steelBase Plinth: Aggregate-finish concrete with curvedshape (to facilitate positioning side-by-side as acontinuous run of individual pads.)
Specifcations
Height: 848mmWidth: 843mmDepth: 997mmWeight: 140kg
InstallationCyclePads are free-standing and sel f-supportingstructures which are suitable for positioning on any flatand even surface, e.g. tarmac, concrete slabs, blockpaving etc. Where a multiple quantity of CyclePads arepositioned side-by-side in a continuous run, the hoopscan be front or back facing. A concealed locking barsystem is used to securely connect each CyclePad.
ColoursHoop: Natural brushed stainless steel or grey
Armortec coating.
Base plinth: Granite-effect surface with grey borders.
843997
848
700
-
8/3/2019 Architectural Shelters Canopies and Cycle Shelters[1]
9/9
www.glasdon.comGlasdon U.K. Limited
Architectural Products Department
Preston New RoadBLACKPOOLLancashireFY4 4UL
Tel: (01253) 600415Fax: (01253) 792558e-mail: wa@glasdon-uk.co.ukweb: www.glasdon.com
GP415/01Glasdon UK Ltd. 04/09. Glasdon reserve the right to alter price and specification without prior notice. ALL/ST
Glasdon Group is An Equal Opportunities Employer.
top related