#2050 polyhyb
TRANSCRIPT
MARKETED BY:
MANUFACTURED BY:
#2050 POLYHYBHybrid Polymer Anti-Corrosion Coating
DescriptionSingle component, air drying, thermo plastic hybrid co polymer. Self priming ready to use. Fast drying Excellent adhesion, abrasion & scratch resistance both on metals as well as concrete. Excellent corrosion & weathering protection - >1500 hours salt spray resistance. Colour fast. Superior U.V. resistance. Resists temperature upto 200c. Good resistance to hot oils, alkalies, acids. Available in various industrial shades. STANVAC CHEMICALS (INDIA) LTD.Admin. Office: 15-16, Old Sewa Nagar Market, P.O. Lodhi Road, New Delhi-110 003. India Tel: +91-11-24647199/ 24647252 Fax: + 91-11-24633847/ 24623826 E-mail: [email protected]: 26/10/09
MARKETED BY:
MANUFACTURED BY:
Suitable for protecting both ferrous as well as non ferrous surfaces. Fire Resistant. Economical High coverage, low application cost (no need for primer, thinners...), long life. Re coatable onto itself without surface preparation easy refresh coats.
ApplicationSteel pre building structures, equipments, control panels, transformers, structures, pipelines, storage tanks, pumps, valves, cranes, conveyors, electric motors solar equipment... As superior alternative to conventional paints, solvent based epoxies, PUs, alkyds, powder coating..... 1. 2050 POLYHYB forms a tough co polymer plastic laminate through intermolecular cross linkages & takes a very strong bonding with clean metal surface. The resultant coating is impermeable to fluids, air & gases. 2. High Spread, instant wetting & plastic tentacle formulation ensures excellent bonding. The fibro elastic properties of the material keep the laminate non brittle with no self peeling tendencies, Subsequent coatings form a very strong consolidated coating
Typical Specifications1. DFT ASTM D-1440 (a) Sprayable Grade (b) Brushable Grade 2. Touch dry - recoatibility (a) Sprayable Grade (b) Brushable Grade : : 10 -15 minutes per pass 15 -20 minutes per pass : : 70 80 microns DFT in Two Passes 110125 microns DFT in Two Passes
STANVAC CHEMICALS (INDIA) LTD.Admin. Office: 15-16, Old Sewa Nagar Market, P.O. Lodhi Road, New Delhi-110 003. India Tel: +91-11-24647199/ 24647252 Fax: + 91-11-24633847/ 24623826 E-mail: [email protected]
MARKETED BY:
MANUFACTURED BY:
3. Conical bend test ASTM D-1185 4. Salt spray resistance ASTM B117
: :
Passes 3 Cycles Passes 1500 Hours Upto 200c
5. Temperature resistance ASTM D-2243:
Surface PreparationDegreasing :Nace SSPC SP -1 : Cleaning of oil, grease, dirt, soils, salts... use # Z101 ALPHA 3 degreasing solution. Rust & Scale Removal :- Nace SSPC SP -2 - Nace SSPC SP -3 - Nace SSPC SP -6 - Nace SSPC SP -8
: : : :
Hand tool cleaning Power tool cleaning Commercial blast cleaning. Pickling. Use our # Z77 RUST & SCALE REMOVER (RTU). Post cleaning ensure surface neutralisation via alkali wash /fresh water wash .
Paint Removal Existing paint needs to removed using # Z82 PAINT STRIPPER (BULK). Post paint removal ensure surface is clean & dry without any paint stripper chemical residue.
Application Methods & Coverage(a) Sprayable : Standard air compressor line. HVLP (High Volume Low Pressure) spray gun to be used. Air should be clean & oil /moisture free. Air line pressure should be between 2.5 3.5 kgs max. Adjust air pressure knob, spray pattern knob & paint qty flow knob as per need. Coverage in two passes : 22 sqft /Ltr approx. Standard short hair stiff brush. Slow application. Coverage in two passes : 12 sqft /Ltr approx.
(b) Brushable
:
STANVAC CHEMICALS (INDIA) LTD.Admin. Office: 15-16, Old Sewa Nagar Market, P.O. Lodhi Road, New Delhi-110 003. India Tel: +91-11-24647199/ 24647252 Fax: + 91-11-24633847/ 24623826 E-mail: [email protected]
MARKETED BY:
MANUFACTURED BY:
Technical Comparison2050 POLYHYB US Single component alkyd enamel paints, two component multi layer (primer + basecoat + top coat) epoxy /PU paints.S. No.1. 2. 3. Type Grade Thinner
Alkyd Enamel PaintsAlkyd Resin Base Single Component Thinning with the help of thinner necessary Red oxide primer necessary 4 - 5 hours No resistance Poor Poor Good
Two Component Epoxy /PU CoatingsThermosetting Polymer Correct Mixing of two components is very critical Primer necessary 48 - 96 hours Good chemical resistance Fair Fair Good
2050 POLYHYBThermoplastic HYBRID Copolymer Single Component Ready to use system
4. 5. 6. 7. 8. 9.
Primer Drying time Acid, alkali and chemical resistance U.V. Resistance Heat Resistance Adhesion, abrasion, bend & scratch resistance Durability
Primer less 10 20 Min. for touch dry Excellent acid, alkali, chemical resistance Excellent Up to 200 C Excellent
10.
6 Month
11. 12. 13.
Shades Salt spray resistance Fire Resistance
All I.S. Shades Non performance; decorative paint Flammable
4 -5 Years (Two Component when used together with primer & top /base coats) Limited shades 300 500 hours Flammable
4 5 Years
All I.S., RAL Shades 1500 hours Resistant to fire post full cure.
USE THE BEST STANVAC CHEMICALS (INDIA) LTD.Admin. Office: 15-16, Old Sewa Nagar Market, P.O. Lodhi Road, New Delhi-110 003. India Tel: +91-11-24647199/ 24647252 Fax: + 91-11-24633847/ 24623826 E-mail: [email protected]