wirefree network manager
TRANSCRIPT
Wireless monitoring is finally receiving broader acceptance in the criticalfacilities marketplace after decades of concern about factors such asreliability, battery life, and setup complexity. While some of these concernsare still valid in traditional wireless platforms such as Mesh, Zigbee, and
Point to Point networks, RLE’s patented Lattice™ WireFree Technology
removes all barriers to going WireFree in your facility.
The RLE Lattice™ WireFree Network Manager (LAT-MGR) is the heart of
our solution. The Lattice Network Manager receives and aggregatessignals from our WireFree sensors and displays the status of up to 400
sensors in one easy to access and interpret web interface. With the
Lattice™ Network Manager, you can get a quick and conciseunderstanding of not only the current status of your sensor network, butalso direct alarm notification and data trending information, all in onecentralized unit.
Have a Building Management System (BMS), Data Center Infrastructure
ManagementSystem(DCIM),orNetworkManagementSystem(NMS)thatyouwouldliketheLattice™NetworkManagertoreportupto? Noproblem.The Lattice™ Network Manager can relay the gathered information to anyof these systems and provide you with “a single pane of glass” formonitoring.
The convenient WireFree design reduces installation and systemexpansion costs frequently associated with hard-wired sensors andsystems, and generally allows you to complete installation without the aidof an electrician or RLE staff.
The LAT-MGR works in tandem with RLE’s family of Lattice™ WireFree
Sensors. To learn more about RLE’s Lattice™WireFree Technology, andhow it outpaces the other technology in the marketplace, visitwww.rletech.com/lattice/.
Monitoring & Notificationwww.rletech.com
Falcon
LAT-MGR
Lattice WireFreeNetwork Manager
Features• Patented WireFree design
• WireFree receivers & antennas are
included for indoor open airtransmission.
• Additional wired inputs and outputs
provides expanded functionality
• Monitor up to 400 Lattice™ WireFree
sensors of all types
Benefits• Easy, low cost installation
• User friendly web interface enables
direct alarm notification and stand-alone
operation
• Output readings as Modbus, BACnet,
and SNMP for integration with BuildingManagement Systems (BMS) andNetwork Management Systems (NMS)
Use the LAT-MGR and RLE’s
Sensors to monitor:•
•
•
•
•
•
Temperature
Humidity
as a Pulse Counter
a Digital Input
Equipment Status
Third-party Devices
© Raymond & Lae Engineering, Inc. 2013. All rights reserved. RLE® is a registered trademark and Seahawk™, Falcon™, and Raptor™ are
trademarks of Raymond & Lae Engineering, Inc. The products sold by Raymond & Lae Engineering, Inc. are subject to the limited warranty,limited liability, and other terms and conditions of sale set forth at http://rletech.com 1/2015
v1.2
(3/2015)
LAT-MGR Specifications
Included Equipment
Power
Voltage RatingCurrent Rating
Wired Digital Inputs
Wired Relay Outputs
Communication Ports
EthernetRS-232RS-485
Protocols
TCP/IP, HTML, TFTP, SNMPModbus (EIA-485)Modbus TCP/IP UDP/IPBACnet/IPBACnet/MSTP
Lattice™ WireFree Communications
Frequency RangeMax Number of WireFree PointsAntenna
Web Interface Login Security
Indicators
Lattice WireFree NetworkDigital I/OPowerEthernet Network StatusDevice Status
Alarm Notification
Sensor Transmission Rate
Data Trending
TemperatureTemperature/Humidity
Data Export
Operating Environment
TemperatureHumidityAltitude
Storage Temperature
Enclosure Dimensions
Weight
Mounting
Certifications
LAT-MGR, (3) antennas, power adapter
24VAC, 50/60Hz; 24VDC
600mA max
Four (4) 24V, 10mA max. per channel
Two (2) Dry Contact, Form C, 8A @ 250VAC resistive, 5A @ 30VDC resistive
10/100 BASE-T, RJ45 connector; 500VAC RMS isolation
DB9 female connector; 9600 baud; No parity, 8 data bits, 1 stop bit1200, 2400, 9600 or 19200 baud (selectable); Parity: none, even or odd, 8 data bits, 1 stop bit
V1: V2C MIB-2 compliant; NMS Manageable with Get; IPv4; IPv6
Modbus Slave; RTU mode; Supports function codes 03Modbus Slave; TCP/IP transmission protocol
ASHRAE STD 135-2004 Annex JEIA-485
868-870MHz / 902-928MHz
400Three (3) 816 - 1018MHz with RP/SMA connectors
Eight (8) users, configurable as View Only or Administrator
1 Blue TX, 1 Blue RX
2 Total, 1 Green/Red Status LED per Relay1 Blue LED1 Blue LED
1 Green/Yellow/Red LED
Visible LED
EmailRelay outputIntegration into another system via SNMP, Modbus, and BACnet
Once every 10 - 900 seconds, configurable
Records temperature data at 5 minute intervals; daily records; retains 30 days of information
Records temperature and humidity data at 10 minute intervals; daily records; retains 30 days of information
Sensor information and current readings downloadable as .csv files
32ºF to 122ºF (0ºC - 50ºC)
5% to 95% RH (Non-condensing)15,000 ft (4572m) max.
-4ºF to 185ºF (-20ºC - 85ºC)
9.7”W x 4.8”D x 1.6”H (24.6cmW x 12.2cmD x 4.1cmH)
2.3lb (1.04kg)
19” 1U Rack Mount or Wall Mount
ETL listed; conforms to UL 61010-1, EN 61010; certified to CSA C22.2 NO, 61010.1; RoHS compliant;