We are offering subject to prior sale: DORNIER LOOMS Item#004641 04 Dornier Rapier looms, type HTVS 4/S nominal width 220 cm, 1997, AT-control with 4 weft colours ECS2 with dobby Stäubli 2667 (28 shaft capacity - 20 shafts installed) electronic cloth take-up (ECT), electronic warp let-off (EWL), leno selvedge, warp beam diam. 800 mm Accessories per loom: 4 weft accumulators with creel and el. box 12 - 16 heald frames, 1,5 warp beam D: 800 mm, 1,5 cloth rollers, warp stop motion 5-6 bars, 3000 droppers, 3000 heddles looms working delivery immediately available

Item# 004607 06 Dornier Rapier looms, type HTVS nominal width 200 cm, 1993, AT-control HTVS 4/S with 5x 4 colours and 1 x 6 colours (mech. colour selection) with dobby Stäubli 2667 (28 shaft capacity - 14 shafts installed + 6 position for col. selection), electronic cloth take-up (ECT), electronic warp let-off (EWL), leno selvedge, warp beam diam. max. 1016 mm Accessories per loom: 3 - 4 weft accumulators with creel and el. box 12 - 16 heald frames, 1,5 warp beam D: 800 mm, 1,5 cloth rollers, warp stop motion 5-6 bars, 3000 droppers, 3000 heddles looms working delivery immediately available

ITEM#004620 26 Dornier Rapier looms, type HTV 6/SD 16 looms nominal width 200 cm, 1992 , AT-controlled, 6 weft colours 10 looms nominal width 190 cm, 1992 , AT-controlled, 6 weft colours with dobby Stäubli 2667 (28 shaft capacity - 20 - 22 shafts and 6 colour selectors installed), electronic cloth take-up (ECT), electronic warp let-off (EWL), tuck-in units , warp beam diam. max. 800 mm Accessories per loom: 4 weft accumulators with creel and el. box 12 heald frames, 1,5 warp beam D: 800 mm, 1,5 cloth rollers, 5.000 droppers and heddles delivery October / November

PICANOL LOOMS Item#004631 48 PICANOL RAPIER LOOMS, type GTX 190 4-R, yoc 1996, working width 190cm, 4 weft colours, 460 ppm, with Electronic Staubli 2612 Dobby - 12 shafts installed Accessories per loom: 4 Accumulators 12 frames 1,5 Cloth Beam 1,5 Warp Beam 10.000 heddles and droppers

spare parts available looms presently working

Item#00 1 BENNINGER WARPING & SIZING 1 Benninger Bendirect 1250 Warper year 1998, 30 beams flange diam. 1250mm, width 2200mm, suitable for natural and synthetic fibre. Warping command 18,5 kW with 1500 rpm., max. warping speed 1200 m/min. Net tension (phase-phase): 3x400 V + 6% - 10%. 50 Hz, 3 phases. Compressed air consumption min. 5 bar 0,2 m3/h. Disk brakes (hydraulic pressure) on both sides of the beam. Undirect pressing system, the pressure is adjustable up to 2000 to 6000N. Momentary lifting of the pressing roll at machine stop (Kick-back). Reed-support for installation of an extensible zig-zag reed (50mm segments, agjustable for 657-460 yarns) for a precise yarn-threading. Impulse-blowing from the compressed air network. Crossed yarns separating device. Production data recording for six shifts with the following characteristics: warp length, number of warp beams, number of yarns per beam, number of the shift. On-board Printer. Filaccumulator yarn accumulator, max capacity 7 meters. BEN-VAC aspiration system. BEN-SENS V-creel, model GE, 640 positions in work, 680 reserve, total 1320 pos. Bobbins at 5 levels, max diam 305mm with a minimum distance between bobbins 5mm, vertical gauge 435mm. Count from 50 to 500 dtex. Integrated electronic optical device for yarn tensioning, digital indicator of number of yarns in work, indication of broken yarn. Automatic pre-tensioners. 1 Benninger Bensizetec Sizing Range model BEN-SIZETEC ZA20 2KAV/TD CT 4/4/6 BB 2200/4000, YOC 1999. Composed of: Benninger beams creel model ZA20 for 20 fractional beams each width 2200mm (flange to flange), max flange diam 1250mm, with air pneumatic braking system. Unwinding tension 150N for beam with flange diam 1250mm, 160N for beam with flange diam 1000mm at the air pressure of 6 bar. Ferber beam-loading-unloading carrier with on-floor rails. 2 electronic drafting force measuring systems model MW. 1 water pre-wetting tank, with: feeding group with 1 stainless steel cilinder, 1 rubber-covered cylinder, 1 chromed cylinder, 2 sections tank, max water temperature 90°C, each section capacity 300 l. Squeezing system at the exit of each section. BENNINGER size boxes model TD, cylinders width 2400mm, working width 2200mm, each box with 2 pairs of squeezing cylinders and 1 immersion cylinder, adjustable squeezing pression up to 5.000 daN (kgf), pneumatic device for pressure and lifting of the cylinder, Automatic regulation of squeezing pressure by BEN-SIZETEC system. Automatic size feeding device. HANDYMAT sizing box control system with display. Wet separating field for impregnating box for separation of the warp in two layers,

with 1 teflon-covered steam-heated measuring cylinder and 1 teflon-covered steam-heated deviating cylinder. 1 Benninger compact dryer type CT4/4/6, 14 drying cylinders width 2400mm (4+4+6), 10 of them tefloned, diam 800mm. Saturated steam 3,5 bar, max temperature 147°C. 5 electronic temperature regulations; command by means of 3 phases motor and inverter. Standard hooder with 2 fans. CV oiling and waxing device at the exit. MAHLO humidity control and regulation. Dust suction and filtering system. Dry separating field 6,5 meters length, with 19 chromed leasing positions. 1 Benninger high productive headstock/beaming model BB, width 4600mm, max working width 4000 mm, suitable for beams up to max flange diam 1100 mm, speed from 0,4 to 125 m/min, chain tension 1500 daN, inverter control, extensible reed. Computerized microprocessor automatic control system, PC and modem. Siemens Simatic PC FI15 software with monitor. Size kitchen model SIZEMEIX 1200, capacity 1400 l, working capacity 1200 l, with automatic temperature regulation system, water counter. 2 storage tanks model V1300, working capacity 1300 lt each 1000 lt capacity each, temperature regulation.

SECTIONAL WARPERS Item#004564 1 BENNINGER SECTIONAL WARPER, TYPE BEN-MATIC YEAR OF CONSTRUCTION 1996 CONE RATIO : 1 : 5 WARPING WIDTH 2200 MM MAX WARPING SPEED 800 M/MIN EGALIZING ROLLER ANTISTATIC DEVICE WAXING DEVICE BEAMING MACHINE WIDTH 2200 MM PRESSING DEVICE MAX 10 BAR MAX BEAMING SPEED 220 M/MIN MAX WARP BEAM FLANGE DIA 1000 MM WAXING DEVICE TYPE “C” – WITHOUT PUMP LEASE 640 x 2 WITH : 1 BENNINGER CONE CREEL TYPE GS / UB YEAR OF CONSTRUCTION 1989 624 SPINDLES – 6 DECKS –PITCH 300 / 300 MM 2 FANS YARN CONTROL GFAg 624 PRE-TENSIONERS The Creel tensioner device modified during the year 1996. The factory was running up to Ne 100 on this machine, cotton 100%. The creel is sensitive for fine counts cotton yarns and for dyed yarns.

Offer of the month Item#19270 2 Hacoba Sectional Warpers 1x 1983 und 1x 1986, Type Toptronic USK 1000-E, working width 2200mm, conicity 15°, incl. waxing device and tanks, with beam pressure device, max. flange diam. 1000mm, with beaming machine max. working width 280 cm with each 1 Hacoba creel (1 x 336 + 336 spindles, 1 x 384 + 384 spindles), turn creel execution (no bobbin carriages), gauge 330 mm Machines have been working in a german plant producing upholstery and worsted fabrics (on Sulzer looms). Machines are 100% complete and in top working condition. Best Price CFR major seaport EUR 22.500.-- each very special package price for 2 machines of Item 19270 = CFR EUR 40.000.-- total incl. supervision works of a german specialst (accomodation and lodging, air-fare to be provided by buyer)

ACCESSORIES - AUXILIARIES Item#004604 - ROJ WEFT FEEDERS 18 weft accumulators ROJ Quartz 29 weft accumulators ROJ AT1200 14 electrical panel with 4 - 8 plugs, suitable for ROJ AT1200 and ROJ Quartz weft feeders almost new cone stands and stands for weft feeders and boxes. All devices complete, in very good working condition, from a german factory.

Item#004633 4 Knotting machines, make Fischer Poege, type PU and FA, with frame and accessories 200 HEALD FRAMES nearly new - in top condition suitable for 190 cm GTM, GTM-A, GTM-AS, GTX

4 ASCENDING BATCHING MOTIONS suitable for any loom, working width 200 cm and further...

* Sulzer heald frames 85" and 143" available * used Sulzer and Dornier spare parts * Additionally we can offer 200 almost new Heald Frames for Picanol GTM-A/AS Rapier looms, several transport devices for cloth rollers and warp beams, oil cleaning devices, etc.

Sample loom

New Xtema Spare parts (Made in Europe) for: Sulzer - Dornier - Rieter – Schlafhorst

www.xtema.de