Installation GuideModel NumbersT24-WT24 inch slide/grab bar with white ADA hand shower T36-WT36 inch slide/grab bar with white ADA hand shower T48-WT48 inch slide/grab bar with white ADA hand shower

Need Help?Symmons customer service:Phone: (800) 796-6667gethelp@symmons.comMon - Fri 7:30 am - 7:00 pm EST

www.symmons.com/service

• Technical help• Product information• Warranty policy

1/4" carbide tip drill bit for wall tiles 1 2 3 4

5/32" drill bit

wall elbow

stepwasher

vacuumbreakerwasher

hoseescutcheon

drill hole 5/32 inch

■ SLIDE

■ LOCK

■ SLIDE

Adjust for ease of

movement Grab Bar must be secured with at least two (2) of three (3) screws at each end.

six (6) #10 x 2" (51 mm) wood screws included

�at edge

Step 1 Mount grab bar Step 2 Attach slider assembly Step 3 Install hand shower

bottom side

Visual Guide Wall Mounted Slide/Grab Bar & Hand Shower

Tools and Materials

Compliance-ASME A112.18.1/CSA B125.1-WaterSense 1.5 gpm and 2.0 gpm

Certi�ed byCSA Group

For California ResidentsWARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

Wall Mounted Slide/Grab Bar & ADA Hand Shower with non-positive shut-offT24-WT, T36-WT, T48-WT Series

*Note: When ordering replacement partsfor product with an optional decorative �nish, append appropriate three letter �nish suf�x code to part numbers marked with an asterisk (*).

referenceverticalgrab bartable �exible metal

or vinyl hose

3" (77 mm)diameter

Note: Dimensions subjectto change without notice

six (6) #10 x 2" (51 mm)wood screws included

3-3/8" (85 mm)diameter

adjustable slider

90˚ wall elbow2-1/2" (64 mm)diameter

press-on screwlessescutcheon

supplyoutlet

1-1/2" (38 mm)bar diameter

LOCK ■

standard woodenwall stud

Ordering replacement parts:Call Symmons customer service at(800) 796-6667, (781) 848-2250M-F 7:30 am - 7:00 pm EST or checkour website at symmons.comfor a list of Symmons distributors.

supplyinlet

1-1/2" (38 mm)standard studwidth

hoseconnectorG 1/2

vacuumbreaker

1-1/2"(38 mm)

extend male 1/2" I.P.S. threads from �nished wall 3/8" (10 mm)

supply

Hand Shower Hose■ �exible metal (5')■ �exible metal (6')■ vinyl (5')■ vinyl (6')

wall elbow & �ange

vacuum breaker

Part Number Item

SP-4*SP-4-6*ST-12RVST-12RV6

Replacement Parts

slider assembly

FP-40*

INLINE-VB*

white wand

FP-SM6*

ADACHS-WT

Length

Vertical Grab Bar

Model

T24-WT

T36-WT

T48-WT

24" (610 mm)

36" (914 mm)

48" (1219 mm)

Dimensions Wall Mounted Slide/Grab Bar & ADA Hand Shower

Grab Bar LocationFor proper mounting heights and location consult with your state and local code official having jurisdiction over the installation.

Solid Support ■ Grab Bar must be mounted with both ends positioned over a wall stud. A stud finder can be used to locate wall studs.

■ Secure through wall board or tile to the wall stud so as to hold a minimum of 250 pounds of force.

Installation Notes

■ At least two (2) of the three (3) screws provided must be used on each end of the Grab Bar to properly secure. Note: Standard size wall stud limits using more than two (2) screws.

Mounting Grab Bar ■ Drill all holes through wall board into wood wall studs using a power drill and a 5/32 inch drill bit.

■ Ceramic tiles - If installing Grab Bar

over ceramic tiles, first drill a pilot hole through the tile using a 1/4 inch carbide tip drill bit to prevent damage to the tiles.Next, drill a pilot hole into the wood wall stud using the 5/32 inch drill bit.

Care and Cleaning Mild soap and water or a non-abrasive cleaner is recommended for cleaning.

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621Copyright © 2017 Symmons Industries, Inc. ■ symmons.com ■ gethelp@symmons.com ■ ZV-999 REV D ■ 111317