valid until the 31st december omg - ymt tooling
TRANSCRIPT
Autumn IssueValid until the 31st December
The comprehensive OMG TA range is now regarded as the ultimate heavy duty angle head series by users throughout the world.Whether a requirement is for higher spindle speeds or to machine components at various angles, OMG’s high-quality TA spindles are able to increase machining capabilities and to boost efficiencies. The use of OMG’s TA angle heads allows users to release the full latent potential of their machine tools, to broaden the scope of the work they undertake and to enter new markets.Recognising the need for high levels of adaptability, complementing its application specific range of TA angle heads, OMG has developed an advanced modular TA angle head system that allows users to achieve cost reductions and to increase profits. Also, on the rare occasion that a product from OMG’s standard TA angle head range will not meet a customer’s specific requirements, the company is able to design and manufacture special angle heads to satisfy the most challenging of applications.All OMG TA angle heads are supplied with an internal channel coolant system. OMG TA angle heads’ standard torque arms allows the head to be changed automatically. The coupling system between the conical pin, which can be axially adjusted, and the “V”-housing of the stop-block, allows the closing of the space between the parts. This results in a rigid, backlash free system that delivers maintenance savings, in addition to extending both tool life and bearings life.Also available, for maximum stability - The OMG TriBlock and QuadBlock torque arm systems, each with an adjustable pin, allowing both radial and axial thrusts to be effectively opposed and providing the possibility of milling or finishing with total security.All standard OMG TA angle heads are made from solid steel resulting in maximum strength, minimum possible size (ideal for thin wall milling) and less weight. Each body is niploy treated and anti-corrosion coated, giving the guarantee of high levels of protection against rust as well as acid and aggressive lubricant-coolants. Each TA angle head contains precision bearings, or when models are intended for high stock removal conditions, tapered roller bearings. Lubrication is provided by long-life grease.
OMGDELIVERINGEFFICIENCY
From From From From
£3,050 £4,080 £2,560 £2,950
TA.PL Extended Series
TAR.PLExtended Series
TA.PSeries
TA.2PSeries
www.ymttooling.co.uk 01935 428375 [email protected]
DC
From
£9
HPC UC SD-AM SD
DC Slim Chucks• Designed without nut and with inner holding collet for increased stability and rigidity• 30,000rpm @G2.5• Run Out <5µm (4xD)• Suitable for Drilling, Milling, Tapping and Reaming
Part No. Range (mm) Gauge Length (mm) PriceBT40-DC6-90 1-6 90 £184BT40-DC6-120 1-6 120 £218BT40-DC8-90 3-8 90 £184BT40-DC10-90 3-10 90 £184
*A wide range of other tapers and gauge lengths available
UC Gold Chucks• Designed without nut and with inner holding collet for increased stability and rigidity• 30,000rpm @G2.5• Run Out <5µm (4xD)• Suitable for drilling, milling, tapping and reaming
Part No. Range (mm) Gauge Length (mm) PriceBT40-UC6-90 3-6 90 £184BT40-UC10-90C 3-10 90 £213BT40-UC10-120 3-10 120 £218BT40-UC16-90C 6-16 90 £213
*C - Through centre coolant version*A wide range of other tapers and gauge lengths available
SD Plus Chucks - AM Type• SD Collet designed with 8° angle to increase the gripping torque of tools• 30,000rpm @G2.5• Runout <5µm (4xD)• Suitable for drilling and milling
Part No. Range (mm) Gauge length (mm) PriceBT40-SD6-90AM 2-6 90 £118BT40-SD10-90AM 2-10 90 £118BT40-SD13-90AM 3-13 90 £123BT40-SD16-90AM 4-16 90 £131
*A wide range of other tapers and gauge lengths available
DC Extension Slim Chuck Sets
Part No. Collets Included Pieces Price
SST10-DC4-90 DC4-2E, 3E, 4E 3 £255
SST12-DC4-120 DC4-2E, 3E, 4E 3 £268
SST12-DC6-120 DC6-3E, 4E, 6E 3 £221
SST16-DC6-150 DC6-3E, 4E, 6E 3 £234
SST20-DC6-200 DC6-3E, 4E, 6E 3 £254
SST25-DC6-250 DC6-3E, 4E, 6E 3 £288
SST25-DC10-250 DC10-3E, 4E, 6E, 8E, 10E 5 £380
SST20-DC8-200 DC8-3E, 4E, 6E, 8E 4 £297
HPC Powergrip Chucks• Designed with needle roller bearing for increased clamping• 30,000rpm @G2.5 • Run out <5µm(4xD)
Part No. Range (mm) Gauge Length (mm) PriceBT40-HPC12-85 12 85 £294BT40-HPC16-90 16 90 £294BT40-HPC20-90 20 90 £294BT40-HPC25-95 25 95 £294BT40-HPC32-110 32 110 £294
*A wide range of other tapers and gauge lengths available
SD Plus Chucks• SD Collet designed with 8° angle to increase the gripping torque of tools• Runout <5µm (4xD)• Suitable for drilling and milling
Part No Range (mm) Gauge Length (mm) PriceBT40-SD10-90 2-10 90 £110BT40-SD13-90 3-13 90 £115BT40-SD16-90 4-16 90 £123
*A wide range of other tapers and gauge lengths available
DC Collets - E TypePart No Sizes (mm) Price
DC6- 3, 3.5, 4, 4.5, 5, 5.5, 6 £39
DC8- 3, 4, 6, 8 £38DC10- 3, 4, 6, 8, 10 £40
Wrenches & Spanners
UC ColletsPart No Sizes (mm) PriceUC6- 3,4,6 £41UC10- 3,4,5,6,8,10 £52UC16- 6,8,10,12,14,16 £57
HPC ColletsPart No Sizes PriceHPC20- 6,8,10,12,16 £34HPC25- 12,16,20 £34
SD-E ColletsPart No Sizes (mm) PriceSD10-E 2-10 £29SD13-E 3-12 £31SD16-E 4-16 £35
SD-D ColletsPart No Sizes PriceSD10-D 2-10 £29SD13-D 3-13 £31
DC Extension Slim Chuck Sets
www.ymttooling.co.uk 01935 428375 [email protected]
DIN 69893 / HSK63 Form A
Part Number Bore dia. (mm) Gauge Length(mm) Price72.575.500.010 3 90 £14972.575.500.040 4 90 £14972.575.500.070 5 90 £14972.575.500.100 6 90 £13472.575.500.200 8 90 £13472.575.500.300 10 90 £134
DIN 69871 / SK40
Part Number Bore dia. (mm) Gauge Length(mm) Price72.060.500.010 3 80 £14172.060.500.040 4 80 £14172.060.500.070 5 80 £14172.060.500.100 6 80 £10972.060.500.200 8 80 £10972.060.500.300 10 80 £109
DIN 69893 / HSK63 Form A
Part Number Bore dia. (mm) Gauge Length(mm) Price72.575.510.010 3 80 £29472.575.510.040 4 80 £29472.575.510.101 6 80 £28272.575.510.201 8 80 £28272.575.510.301 10 85 £28272.575.510.400 12 90 £28272.575.510.500 16 95 £28272.575.510.600 20 100 £282
DIN 69871 / SK40
Part Number Bore dia. (mm) Gauge Length(mm) Price72.060.510.010 3 80 £27072.060.510.040 4 80 £27072.060.510.100 6 80 £25472.060.510.200 8 80 £25472.060.510.300 10 80 £25472.060.510.400 12 80 £25472.060.510.500 16 85 £254
Jetsleeve Shrink Fit Toolholders
Standard Shrink Fit Toolholders
*BT40 tapers and other gauge lengths available
*BT40 tapers and other gauge lengths available
ER Style Collet Chucks
*Other tapers and gauge lengths available
*Other tapers and gauge lengths available*Other tapers and gauge lengths available
BT MAS 403• Balanced to 20,000rpm @ G2.5• High Quality - German manufactured
Part No. Taper Style Capacity(mm)
GaugeLength (mm) Price
40.05.07.22 BT40 ER11 1-7 100 £9640.05.10.2 BT40 ER16 1-10 70 £6440.05.10.22 BT40 ER16 1-10 100 £9640.05.10.23 BT40 ER16 1-10 160 £10940.05.13.21 BT40 ER20 1-13 70 £7440.05.13.22 BT40 ER20 1-13 100 £9640.05.16.2 BT40 ER25 1-16 70 £5840.05.16.22 BT40 ER25 1-16 100 £9640.05.16.23 BT40 ER25 1-16 160 £10940.05.20.2 BT40 ER32 2-20 70 £5840.05.20.21 BT40 ER32 2-20 70 £6840.05.20.22 BT40 ER32 2-20 100 £9640.05.20.23 BT40 ER32 2-20 160 £109
DIN 69871/SK Form• Balanced to 20,000rpm @ G2.5• High Quality - German manufactured
Part No. Taper Style Capacity (mm)
GaugeLength (mm) Price
40.01.07.2 SK40 ER11 1-7 70 £7940.01.07.22 SK40 ER11 1-7 100 £9240.01.10.2 SK40 ER16 1-10 70 £6440.01.10.22 SK40 ER16 1-10 100 £8640.01.10.23 SK40 ER16 1-10 160 £10940.01.13.2 SK40 ER20 1-13 70 £7440.01.13.22 SK40 ER20 1-13 100 £8640.01.16.2 SK40 ER25 1-16 70 £5840.01.16.22 SK40 ER25 1-16 100 £8640.01.16.23 SK40 ER25 1-16 160 £10940.01.20.2 SK40 ER32 2-20 70 £5840.01.20.22 SK40 ER32 2-20 100 £8640.01.20.23 SK40 ER32 2-20 160 £109
DIN 69893/HSK Form A• Balanced to 20,000rpm @ G2.5• High Quality - German manufactured
Part No. Taper Style Capacity(mm)
GaugeLength (mm) Price
63.11.07.2 HSK63A ER11 1 - 7 100 £11563.11.10.20 HSK63A ER16 1-10 70 £10063.11.10.2 HSK63A ER16 1-10 100 £10063.11.10.22 HSK63A ER16 1-10 120 £11563.11.10.23 HSK63A ER16 1-10 160 £13063.11.13.2 HSK63A ER20 1-13 100 £10063.11.13.23 HSK63A ER20 1-13 160 £17963.11.16.20 HSK63A ER25 1-16 80 £10063.11.16.2 HSK63A ER25 1-16 100 £10063.11.16.22 HSK63A ER25 1-16 120 £11563.11.16.23 HSK63A ER25 1-16 160 £13063.11.16.25 HSK63A ER25 1-16 200 £18963.11.20.20 HSK63A ER32 2-20 70 £10063.11.20.2 HSK63A ER32 2-20 100 £10063.11.20.22 HSK63A ER32 2-20 120 £11863.11.20.23 HSK63A ER32 2-20 160 £13863.11.20.25 HSK63A ER32 2-20 200 £172
Face & Taper BT MAS 403• Balanced to 25,000rpm @G2,5• High Quality - German manufactured
Part No. Taper Style Capacity(mm)
Gauge Length (mm) Price
30.06.10.2 BT-P 30 ER16 1-10 70 £16030.06.10.22 BT-P 30 ER16 1-10 100 £18530.06.16.2 BT-P 30 ER25 1-16 70 £16030.06.16.22 BT-P 30 ER25 1-16 100 £18530.06.20.2 BT-P 30 ER20 1-10 70 £17230.06.20.22 BT-P 30 ER20 1-13 100 £19440.06.10.2 BT-P 40 ER16 1-10 70 £17940.06.10.22 BT-P 40 ER16 1-10 100 £21040.06.16.2 BT-P 40 ER25 1-16 70 £17940.06.20.2 BT-P 40 ER32 2-20 70 £179
Face
and Taper Toolholders
with flange contact
We can also offer...
£10,660.00
• Automatic operation with automatic cool down unit• Shrink Range 3-32mm Ø for carbide shanks• Shrink Range 6-32mm Ø for HSS shanks• Maximum cooling extension 200mm• Maximum shrink extension 400mm• Operator does not have any contact with hot tools• Integrated water cooling
Heat Shrink UnitISG 3410WK
• All tool nose contours may be used• Generator supplied in a “black box” for easy replacement• 100kg• 800mm L x 560mm W x 1720mm H• Includes toolholder adaptor: BT30/BT40/HSK63A
www.ymttooling.co.uk 01935 428375 [email protected]
*DIN69871 & HSK63A tapers also available
Eco-Grip Hydraulic Chucks • For drilling and light machining• Balanced to 15,000rpm @G6.3
Part No. Taper Bore Dia. (mm)
Gauge Length (mm) Price
686600 BT30 12 44 £163686610 BT30 20 51 £163686620 BT40 12 49 £173686630 BT40 20 49 £173686640 BT50 20 60 £246
Hydro-Grip Hydraulic Chucks• For drilling and semi-roughing• Balanced to 25,000rpm @G2.5 (BT50 14,000rpm)
*DIN69871 & HSK63A tapers also available
Eco-Grip ER• Turns ER Collet Chucks into hydraulic systems• High clamping force (Up to 950Nm)
Part No. Taper Bore dia (mm) Gauge Length (mm) Price
685970 BT30 12 59 £252685990 BT30 20 76 £252685000 BT40 12 64 £252685040 BT40 20 76 £252685110 BT50 20 87 £352
Part No. Type ER Price
686855 12 20 £153686875 16 25 £151686865 20 32 £174686885 25 40 £194
Manufactured in Sweden
Part No. Taper Bore dia. (mm)
Gauge Length (mm) Price
683060 BT30 12 50 £363683160 BT40 12 95 £358683150 BT40 20 155 £391684090 BT50 12 106 £425684140 BT50 20 166 £472
Hydro-Grip Pencil Hydraulic Chucks• For drilling to finishing• Balanced to 25,000rpm @G2.5 (BT50 14,000rpm)
*DIN69871 & HSK63A tapers also available
SLIMPlus12mm Ø shank
124mm in length (excluding shank)Dial face 39mm Ø
Slim, compact design3mm Ø carbide tipped stylus
Can approach from X, Y & Z axisWater resistant
VIPlus12mm Ø shank
150mm in length (excluding shank)
Dial face 54.8mm ØSlim, compact design
Large dial face3mm Ø carbide tipped stylus
Can approach from X, Y & Z axisWater resistant
DREHPlus20mm Ø shank
135mm in length (excluding shank)Dial face 39mm Ø
Slim, compact design3.6mm Ø conical probe stylus3.2mm Ø carbide tipped stylus
Can approach from X, Y & Z axisDesigned for lathes
Water resistant
001V2V012 001V2D012 001V2T020
£249 £219 £299
Turning Zero Setter002060200
• Built in magnets to allow for a secure horizontal grip on CNC lathes• 32mm Ø Base• 19mm Ø Touch surface• LED display• Height 60mm ± 0.01mm
£210
£270
Micro Zero Setter002402100 (Magnetic)
• Most suitable for micro tools/small diameter cutting tools• 54.5mm Ø• Measurement range = 0.1mm Ø and above• Height 100mm ± 0.01mm
We can also offer...
www.ymttooling.co.uk 01935 428375 [email protected]
Fatigue-free operation due to balanced weight of
measuring carriage
Single-handedcontrol with selective, pneumatic axis clamp
4 pre-stressed ball bearings mounts for maximum stability
Tactile orcontact-free measuring
Ball-bearing sleeve precision tool holder for maximum runout accuracy even with
overlong tools
User-friendly layout of hand-wheels for finely adjusting the measuring
axes
From
£8,167
Tool Presetter33/35 Swift
We can also offer...
Suitable for:BARUFFALDICMZDMG MORIDOOSANECOCAEMAGEMCOEROGOMATFAIR FRIENDFOCUS CNCGOODWAYHAAS
A WIDE RANGE OFDRIVEN & STATIC TOOLS
Part No. D ER H2 L L1 A B A1 B1 M2 Nm N2 min-1 P kw
RAPPH.32.221.UNL 60 32 91 86.2/89.9 51 94 84 130 108 60 10,000 10
NL Coupling Driven Tools
0° Degree - External Coolant
0° Degree - External Coolant
Part No. d1 ER l1 l2 l3 h1 N2 min- 1 P kw
RAPPS.40.121.UNL 60 40 87.5/91.9 51 26 130 6,000 10
Part No. D ER H H1 H2 L L1 A B A1 B1 M2 Nm N2 min-1 P kw
RRPPH.32.121.UNL 60 32 90 129 91 100/103.9 67.7 94 84 130 108 60 10,000 10
Part No. d1 ER l1 l2 h1 h2 h3 N2 min- 1 P kw
RRPPS.40.121.UNL 60 40 90 129 101.5/105.9 67 40 6,000 10
90° Degree - External Coolant
90° Degree - External Coolant
HARDINGEHURCOHWACHEONHYUNDAIJOHNFORDJYOTIKOSOSVIT MASLEADWELLMAZAKMIYANOMURATECMORI SEIKI
NAKAMURA-TOMENEXT TURNOKUMAROMISAMSUNGSCHAUBLINSPINNERTSUGAMIVICTORYCM
£470.25
£1,006.50
£478.80
£1,024.80
WAS £1,197
WAS £2,562
WAS £1,197
WAS £2,562
www.ymttooling.co.uk 01935 428375 [email protected]
MV SeriesPrecision Modular Vice
Designed for precision grinding and milling. The moveable jaw is self adjusting and is made of high grade alloy steel stabilised and hardened to ensure quality and durability.
*Various jaw sets available
Part No Jaw Width JawOpening
OverallLength Price
MV100 100mm 100mm 270mm £279
MV125 125mm 150mm 345mm £329
MV150 150mm 200mm 420mm £379
MV150B 150mm 300mm 520mm £309
MV200 200mm 200mm 655mm £599
DSV SeriesDouble Station Vice
Designed with the combination of fixed and moveable jaws. The Tuscan DSV vice has the ability to hold multiple work pieces with the same clamping force. Hardened and ground the DSV range ensures high accuracy and rigidity.
*Various jaw sets available
Part No Jaw Width JawOpening
OverallLength Price
DSV-100 103mm 90mm 430mm £799
DSV-150 150mm 125mm 639mm £799
SSV SeriesSingle Station Vice
Designed to withstand the pressure and force of CNC machining. With a built in anti-lift mechanism the vice ensures accurate and repeatable machining down to microns.
*Various jaw sets available
Part No Jaw Width JawOpening
OverallLength Price
SSV-100 100mm 103mm 350mm £349
SSV-150 150mm 228mm 481mm £379
SSV-200 200mm 259mm 624mm £509
*Various jaw sets available
Tooling Trolleys• BT30• BT40• BT50• HSK63A
Bench Top Stands• BT30• BT40
Toolholder Racks• BT30• BT40• BT50
• BT50• HSK63A
£399From
From
£199From
£49
Filtration efficiency up to 99.97% for particles ≥0.15µm. Includes a drainage system for the collection of re-condensed coolant liquid.
ARNO SeriesEfficient
Low Maintenance
Versatile
Reduced cleaning and maintenance cost due to the self cleaning centrifugal re-condenser and washable metallic filter. Visible gauge to monitor filter conditions.
Suitable for a variety of machining applications including turning, milling, grinding and EDM.
Stages of Filtration
1. Self cleaning centrifugal re-condenser
2. Pre-filtration via washable metallic filter
3. Filtration by coalescence (fibre glass pocket filter)
4. Filtration and soundproofing via washable black filtering panel filter
5. Absolute filtration via HEPA H10 high gravity filter
Suitable for a variety of machining applications including turning, milling, grinding and EDM.
Specifications may vary due to make and model. The filtration units are designed and adapted to suit your specific requirements.For further information please contact our tooling and workholding department.
From
£3,330
www.ymttooling.co.uk 01935 428375 [email protected]
Top Tooling
Adaptor
Threaded Pullstuds
96mm Pullstud Spacing
Locating Boss for Centering Accuracy
R96-DM12To suit DM12 Dovetail Fixture
Compatible with the RockLock 96mm system
Overall Height 67.4mm
Height of Riser 48.4mm
Base Size 125.73mm x 125.73mm Sq.
*Tooling package includes: 1 x Dovetail Fixture, 1x Riser & 4 x Pullstuds
*Tooling package includes: 1 x Dovetail Fixture, 1x Riser & 4 x Pullstuds *Tooling package includes: 1 x Dovetail Fixture, 1x Riser & 4 x Pullstuds
*Tooling package includes: 1 x Fixture, 1x Riser & 4 x Pullstuds
R96-DM12X2To suit DM12 Dovetail Fixture
Compatible with the RockLock 96mm system
Overall Height 67.4mm
Height of Riser 48.4mm
Base Size 125.73mm x 125.73mm Sq.
*Tooling package includes: 2 x Dovetail Fixtures, 1x Riser & 4 x Pullstuds
R96-DM25To suit DM25 Dovetail Fixture
Compatible with the RockLock 96mm system
Overall Height 75.4mm
Height of Riser 48.4mm
Base Size 125.73mm x 125.73mm Sq.
R96-DM50To suit DM50 Dovetail Fixture
Compatible with the RockLock 96mm system
Overall Height 76.4mm
Height of Riser 38.4mm
Base Size 125.73mm x 125.73mm Sq.
R96-DM12 R96-DM12X2
*Tooling package includes: 1 x Dovetail Fixture, 1x Riser & 4 x Pullstuds *Tooling package includes: 2 x Dovetail Fixtures, 1x Riser & 4 x Pullstuds
R96-DM50
*Tooling package includes: 1 x Dovetail Fixture, 1x Riser & 4 x Pullstuds
R96-V75100To suit V75100 Vice
Compatible with the RockLock 96mm system
Overall Height 87.9mm
Height of Riser 31.75mm
Base Size 125.73mm x 125.73mm Sq.
*Tooling package includes: 1 x Vice, 1x Riser & 4 x Pullstuds
R96-CER40To suit CER40 Fixture
Compatible with the RockLock 96mm system
Overall Height 81.3mm
Height of Riser 28.58mm
Base Size 125.73mm x 125.73mm Sq.
£688
£764
£1,464
£837
£818
£764
RL96A-56Aluminium
156mm x 126mm x 30mm2 x M12 Bolts at 100mm
RL96A-6760Aluminium
156mm x 174mm x 30mm4 x M12 Bolts at 60° on 170mm Ø
RL96A-679010Aluminium
156mm x 156mm x 30mm4 x M10 Bolts at 90o on 184mm Ø
RL96A-411Aluminium
Integrated Ø 276mm x 100mm H4 x M12 Bolts at 90o on 252mm Ø
RL96A-6760
£799 £799 £799 £1,199
5 Axis Rotary TableGF-101SWorking Diameter: 100mm ØCentre Height: 135mm
• Transmitted by dual lead worm with increased teeth depths for increased efficiency.• Equipped with heavy duty precision cross roller bearings.
From
£25,000 *Prices subject to site survey, excludes machine tool interface and fitting
Subject to weight | VAT extra at cost
Don’t Forget....Don’t Forget....Don’t Forget....Visit our website now for...
www.ymttooling.co.uk
DELIVERYDELIVERYFREE£250£250on orders over
The Complete Solution
Tel: 01935 428375 | Fax: 01935 432684
[email protected] | www.ymttooling.co.uk
Tuscan House, George Smith Way, Lufton Trading Estate, Yeovil, Somerset, BA22 8QR