UVAX  CONCEPTS  USA  INC  –  1434  Spruce  Street  ,  Suite  100  –  Boulder  80302  Colorado    

1

UVAX CONCEPTS USA INC PLC CONTROL SYSTEMS

UVAX CONCEPTS USA proposes complete technical solutions (hardware and software) for the lighting infrastructures to turn facilities into “controllable assets” more reliable,

efficient, secure and sustainable            While  the  energy  reduction  attained  by  LEDs  does  reduce  the  amount  of  energy  available  to  be  saved  through  lighting   controls,   these  systems   remain   an   economical   strategy   for   achieving   added   efficiency.   Lighting  controls   also  bring   a   host   of   non-­‐energy   benefits,   such   as   improved   monitoring   and   maintenance,  enhanced  occupant  experience,  space  utilization  visualizations,  and  more.  Building  energy  codes  largely  drive  the  adoption  of  more  basic  lighting  controls  such  as  sensors.  Yet,  those  codes  also  create  the  opportunity  for  a  lighting  project  to  upgrade  to  a  more  comprehensive  control  system  for  a  modest  price  increase.                      

Contact:  Roberto  del  Navío  –  r.delnavio@uvaxtech.com  -­‐  

1434  Spruce  Street.  Suite  100.  Boulder.  80302  -­‐  Colorado  US  -­‐  www.uvaxtech.com  

UVAX  CONCEPTS  USA  INC  –  1434  Spruce  Street  ,  Suite  100  –  Boulder  80302  Colorado    

2

PLC CONTROL SOLUTIONS - HARDWARE AND SOFTWARE (CONTROL MANAGEMENT SYSTEM)

A  complete  intelligent  solution          UVAX  CONCEPTS  Control  Systems    

 

 

     UVAX  CONCEPTS  USA  integrated  complete  solutions  allow  the  optimization  of  current  and  future  needs      The  results  is  a  more  efficient  system,  makes  preventive  maintenance  possible,  reduces  total  system  cost  and  anticipate  future  infrastructure  needs.    Power  Line  Communication  Technology  (B-­‐PLC).  Flexible  &  Scalable  solutions          

UVAX  CONCEPTS  USA  INC  is  a  US  company  located  in  Boulder  (Colorado)  that  provides  solutions,  hardware  and  software,  that  encompass  physical  devices  (LEDs,  sensors,  intelligent  electronic  devices,  cameras,  alarms,  information  panels,  wifi  points)  that  may   share   real-­‐time   or   near   real-­‐time   data   with   the   operations   center   and   allow   the   remote   control   facilitating   the  maintenance   and   condition   monitoring   of   the   infrastructures   and   facilities   turning   them   into   “controllable   assets”   more  reliable,  efficient,  secure  and  sustainable  by  providing  “Intelligent  Control”.  • Innovative  non-­‐energy  benefits  built  in  to  lighting  control  systems  are  being  cited  more  and  more  often  as  the  key  decision  

factor  for  installing  a  networked  lighting  control  system.  • While  all  lighting  control  systems  still  function  at  their  core  to  dim  or  shut  off  lights  that  are  not  needed,  these  systems  are  

also  providing  other  features  that  are  potentially  even  more  valuable  to  building  owners  and  managers.    The  UVAX  controls  are  specially  designed  for  facilities  that  require  a  flexible  and  active  management.  These  controls  allow:  -­‐ To   capture   the   information  which   can  be  programmed  according   to   the  management   needs   and   coming   from  different  

devices  as  sensors,  cameras,  etc,  based  on  schedules,  presence,  consume,  or  any  other  specific  needs.  -­‐ The  transmission  of  this  information  and  the  interaction  with  a  Control  Center  (though  the  webserver)  allowing  the  facility  

managers  to  take  the  necessary  decisions  to  optimize  the  resources  and  the  operations  -­‐ The  real  time  remote  monitoring  from  any  device  (lap  top,  phone,..)  of  the  installation/facility  from  the  Control  Center.      The  UVAX  system  has  two  main  elements;  the  NODE,  installed  at  the  device  that  needs  to   be   controlled,   and   the  Concentrator   installed   at   the   control   panel   or   switch   board  where   the   circuit   breakers   are.   The   Concentrator   is   also   responsible   for   linking  (GATEWAY)   the   different   devices   with   the   internet   server,   where   the   management  software  resides.  It  is,  therefore,  a  CLOUD  base  solution,  where  the  user  can  configure,  supervise  and  remotely  control  the  whole  system  anywhere  from  the  internet    

 UVAX   Control   Solutions   differentiates   by   providing   a   bandwidth   up   to   200   times   faster,   allowing   additional   and   advanced  features   to  be   integrated   into   the   same  communication   channel,  making   it   a   cost  effective   scalable  Plug  &  Play   system.  This  integration  can  be  done  in  existing  or  new  facilities  and  brings  the  opportunity  to  anticipate  future  high  speed  data  needs  based  on  facility  management  demands  without  any  remodeling  or  new  wiring   just  by  connecting  these  new  devices  to  the  existing  Control  System  already  in  place.  Outdoor  Lighting    

 

-­‐  Roads/Highways  -­‐  Parks  -­‐  Tunnels  -­‐  Sports  centers  -­‐  Outdoor  Parking  -­‐  Universities…  

Indoor  Commercial  /industrial  facilities  

 

-­‐Hangars/Airports  -­‐  Shopping  malls  -­‐  Warehouses  -­‐  Stations  -­‐  Gymnasiums  -­‐  Greenhouses  Other  Big  facilities  

 

   BROAD  BAND  POWER  LINE  COMMUNICATION  (B-­‐PLC):    UVAX  CONCEPTS  KEY  BENEFITS  

 UVAX  B-­‐PLC  (data  transmission  through  the  power  line)  can  achieve  data  transmission  speeds  of  up  to  600  MB/s.  Based  on  this   licensed  technology,  UVAX  has  developed  solutions   that   are   perfectly   flexible   and   can   integrate  Wifi,   ZigBee   or   Bluetooth   modules   if   decided   by   the  specific  project  conditions  or  client  requirements.    Perfect   solution   for   existing   or   new   facilities   and  communication  infrastructures  installed.  UVAX  (B-­‐PLC),  a  big  difference  for  the  (IIOT):  • Real  Time  Performance  • High  speed  and  Secure  Transmission  • Outperforming  Modulation  Technology  • Plug  and  Play  Installation  and  Configuration    • Standard  Base  IP  Communication  • Scalability  to  add  Nodes  -­‐new  Applications  • Self-­‐Healing  Network  • Low  Cost.  

• Flexible  and  scalable  solutions  • Increase  and  anticipate  operational  effectiveness  and  

productivity.    • 24/7  access  to  data  and  continuously  monitor  and  

control  different  sections  • Boost  operational  performance  and  improve  

process  efficiencies  without  adding  head  count.  • Reduce  the  life  cycle  costs  in  project  development,  

operations,  and  maintenance  • Improve  safety,  environmental,  regulatory  compliance  • Support  increasingly  remote  logistics  • Highly  configurable  and  scalable  to  meet  all  

business  requirements  • Easy  to  learn  and  install.  CMS  (Control  Management  

System)  is  very  intuitive  and  user-­‐friendly  interface  • Multi-­‐user  and  multi-­‐equipment  capability  • Allow  system’s  update,  anticipates  new  demands    

UVAX  CONCEPTS  USA  INC  –  1434  Spruce  Street  ,  Suite  100  –  Boulder  80302  Colorado    

3

 CONCENTRATORS  HEAD  END  -­‐  9009                          BROAD  BAND-­‐  POWER  LINE  COMMUNICATION                  SPECIFICATIONS    

                     APPLICATIONS            INSTALLATIONS,  CAUTIONS  AND  WARNINGS            

(B-­‐PLC)  CONCENTRATORS  -­‐  HEAD  END  9009   The   Head   End   is   installed   in   the   electrical   panel   containing   the   circuits   for   the  

fixtures   to  be   controlled.   The  Head  End   is   responsible   for  managing  each  of   the   fixtures,   sensors  and  devices.   It   saves   the  configuration  and  time  schedule  of  all  fixtures,  manages  the  network,  and  verifies  the  proper  working.    Broadband  Power  Line  Communication  • Real  Time  Performance  • Secure  Transmission  • Outperforming  Modulation  Technology  (OFDM)  • PnP  Installation  and  Configuration  (Plug  and  Play)  • Standard  Base  IP  Communication  • Scalability  to  add  Nodes  and  new  Applications  • Self-­‐Healing  Network  • High  Speed  Transmission  (up  to  600  MBs)  • Cost  effective    

Integrating  • Optimal   path   selection   protocol:   a   technology   that  finds  the  best  route  in  terms  of  attenuation  and  number  of  hops  to  connect  a  Node  to  the  Head  End.  

• Adaptive   load   balancing:   a   technology   that   optimizes  cannel   allocation   to   maximize   the   throughput   in   a  network  with  many  Nodes.  

• Remote   firmware  upgrade:   capable  of   installing  a  new  Node  or  application  software  from  a  centralized  control  center.  

     Name   Head  End  CA  9009  Product  Code   LLP-­‐PLC-­‐Head-­‐End-­‐CA-­‐9009  Metering  Linux     PLC+RJ45+3G+Power  Metering  Input  Voltage     100  -­‐  277VAC  Frequency     50  ~  60  Hz  Power  Factor     >  0.80  Maximum  Power     15W  Max  output  voltage     4.5  VRMS  Max  output  current     70mA  Operating  Temp     -­‐40˚C  -­‐  +60˚C  Dimensions  and  weight  

12  inches  H  X  4  inches  X  1  inch  .    (Weight  2,45lb)  

IP       IP65    Indoor  and  Outdoor   lighting,   safety  and  security  cameras  control,  and   sensors   connectivity   all   of   them   in   different   segments   as  warehouses,   parkings,   hangars,   indoor   farming   or   sport   facilities  among  others.            • This  device  doesn’t  have  replaceable  or  interchangeable  elements,  so  it  mustn’t  be  manipulated.  • If  the  device  is  installed  or  used  in  a  manner  not  specified  by  the  accompanying  documents,  the  safety  of  the  device  may  be  impaired.  • Do  not  install  around  combustible  gas  or  gas  vapor.  • Do  not  install  in  an  electrical  service  with  current  or  voltage  outside  of  the  specified  limit  of  the  device  • Do  not  operate  this  device  with  the  cover  removed.  • Beware  of  working  around  this  device  when  the  voltage  is  live.  There  is  a  risk  of  electric  shock  • See  instructions  for  connection  diagrams      

UVAX  family  of  “Industrial  Internet  of  Things”  Gateways  are  resourceful  multifunction  controllers,  equipped  to  interface  with  different  and  fully  instrumented  networks,  perform  required  protocol  conversions,  and  enable  remote  access  to  exploit  the  full  potential  of  industrial  internet  

UVAX   IIoT   Gateways,   allow   collection   and   analysis   of   an  enormous   amount   of   data   coming   from   sensors   and   other  advanced   instrumentation   networks,   which   can   be   used   to  improve  facility  performance,  and  inevitably  the  efficiency  of  the  systems  and  networks  that  link  them.  Even  the  data  itself  can  become  intelligent  instantly  knowing  which  users  it  needs  to  reach.  The  Linux  Operating  System  in  conjunction  with  a  large  set  of  libraries  and  software  modules  provide  an  easy  to  use  system  design   platform,  making   application   development   a   straight  forward  task.  The   higher   end   models   integrate   high   performance  processors,   with   enough   memory   and   computing   power   to  run   complex   applications   and   handle   challenging   data  analytics  and  work  with  larger  volumes  of  real-­‐time  data.  Implementing   system   security   with   standard   128-­‐,   192,   or  256   Bit   AES   encryption   is   as   easy   as   adding   the   required  module  to  the  operating  system.  These  Gateways  are,  therefore,  Enablers  and  Catalysts    within  the  Industrial  Internet  of  Things.    

UVAX  CONCEPTS  USA  INC  –  1434  Spruce  Street  ,  Suite  100  –  Boulder  80302  Colorado    

4

   NODES  NX  80  SERIES                        BROAD  BAND-­‐  POWER  LINE  COMMUNICATION                  SPECIFICATIONS    

   

         INSTALLATIONS,  CAUTIONS  AND  WARNINGS                    • See   instructions   for  

connection  diagrams  and  installation  

(B-­‐PLC)  NODES  –  NX  80  SERIES  NODES  (NX  81-­‐NX82-­‐NX83-­‐NX84)    The  Receiving  Node  is  integrated  within  the  LED  fixture/device  to  link  it  and  communicate  with  the  Head  End  Node,  the  main  functions  are:  • Data  transfer  between  the  fixture/device  and  Head  End  (concentrator)  

• Set  the  LED  fixture  level  (dimming,  on/off)  as  requested  in  real  time  by  the  system  settings  

• Interface  with  occupancy,  light  or  other  type  of  sensors  

• Check  proper  operation  of  the  unit  • Supervise  operating  temperature  

 

   

Broadband  Power  Line  Communication  • Real  Time  Performance  • Secure  Transmission  • Outperforming  Modulation  Technology  (OFDM)  • PnP  Installation  and  Configuration  (Plug  and  Play)  • Standard  Base  IP  Communication  • Scalability  to  add  Nodes  and  new  Applications  • Self-­‐Healing  Network  • High  Speed  Transmission  (up  to  600  MBs)  • Cost  effective      Name   PLC  NODE  SERIES  NX  80    Product  Code   NX81-­‐NX82-­‐NX83-­‐NX84  INPUT    Input  Voltage  range   100  ~  277VAC  Input  Frequency     50  ~  60  Hz  Power  Factor     >  0.80  Maximum  output  Power     4W  Vac  Output    Power  Line   Single-­‐Phase  ONLY  Output  voltage  range   100  ~  240  VAC  Max  output  current     4A  0..  10  V  Output  Control      Output  voltage  range   0  (min)  ~  10V  (max)  Maximum  output  current   50mA  I2C  Interface    High  level  output  voltage   2.4V  (min)/3.3V(typ)  Low  level  output  voltage   0V  (Typ)  /  0.4  V  (max)  Input  voltage   3.3  V  (typ)/  3.6  V  (max)  PLC  Bandwidth    Initial  Frequency   2MHz  Final  frequency   12  MHz  Bandwidth   10MHz  Operating  Temp     -­‐25ºC  ~  55ºC  Storage  Temp  range   -­‐25ºC  ~  85ºC  Maximum  Temp  (case)   55ºC  Dimensions  and  weight   3inX7,2inX1,32in.(1,1lb)  IP       IP65  

If  the  device  is  installed  or  used  in  a  manner  not  specified  by  the  accompanying  documents,  the  safety  of  the  device  may  be  impaired.  

 

NX80  Series   The  NX80  series  is  a  PLC  node  with  additional  interfaces  and  functionalities.   The  series  consists  of  four  devices  with  common  features  and  some  individuals.   Every  NX80  node  includes:  

• 0..10  Vdc  output  for  dimming  control  of  lamps.    • I2C  interface  for  external  connectivity.    • Real  Time  Clock  (RTC)  which  ensures  the  

maintenance  of  the  date  and  time  after  an  off  state.    

• PLC  connectivity.    Optional  features  are:  

• Measurement  of  the  power  consumption  of  the  luminaire  and  power  fault  detection.    

• Ethernet  10/100  Mbps  Full-­‐Duplex  port  and  auto  MDI/MDIX  with  RJ45  connector  for  IP  connectivity  to  devices  such  as  computers,  cameras,  sensors,  audio  systems  …    

 

   

Integrating  • Optimal   path   selection   protocol:   a   technology   that  finds   the   best   route   in   terms   of   attenuation   and  number  of  hops  to  connect  a  Node  to  the  Head  End.  

• Adaptive   load  balancing:  a   technology  that  optimizes  cannel   allocation   to   maximize   the   throughput   in   a  network  with  many  Nodes.  

• Remote  firmware  upgrade:  capable  of  installing  a  new  Node   or   application   software   from   a   centralized  control  center