using two ordered pairs and the slope formula to find slope of the line slope of a straight line...
TRANSCRIPT
Using two ordered pairs and the slope formula to find slope of the
line
Slope of a Straight Line
Stapel, Elizabeth. "Slope of a Straight Line." Purplemath. Available from
http://www.purplemath.com/modules/slope.htm. Accessed 19 January 2009
Description One of the most
important properties of a straight line is its angle from the horizon or the slope
Sometimes called it’s steepness
Question?Where is
the horizon on a
coordinate graph?
Finding SLOPE using the slope
formula
Why the m for slope?
Answer: There are no definite answers by mathematicians. Some believe it comes from the French word ‘monter’, to climb. Most
believe that this is an urban legend. JUST DON’T FORGET THAT m STANDS FOR SLOPE IN OUR FORMULA!
Analyze the formula. It uses x and y. What do we know about x and y? If we pick an x (input) can we get the matching y (output)? We need two ordered pairs (or points) on the line. HOW?
If you are asked to find slope… you could use the slope formula
Question?What could
you do to find two ordered
pairs? (x,y)
Complete the table
x y = 2/3x - 4 y (x,y)
0 ( , )
3 ( , )
Your ordered pairs should be (0,-4) and (3,-
2)
NOTE: When the coefficient is a fraction use 0, the denominator, and the opposite of the denominator as the inputs (domain).
Let’s use those points in the
formula
Δ y = (-4) – (-2)
Δ x = (0) – (3)
x yf(x)
0 -4
3 -2= -2 = 2
-3 3
Our slope is 2/3
Slope as a ratio
The ratio that describes the tilt of a line is the slope of that line Remembering ratios: a comparison of two quantities by division
Ratios can be written three ways 2 to 3 2:3 2/3
We will use the fraction form 2/3
You try it…
x yf(x)
1. y = -2x +3 2. y = 3/5x - 2
x yf(x)
The slopes are -2 and 3/5.
What do you notice about the slope and the equation?
Find the slope of each line.
m= _______ m= _______
Slope-Intercept Form
Look at those equations again.
Each slope that we found (using the slope formula) appears just before the x in the equation.
This will help you understand the slope-intercept form.
1. y = -2x +3 2. y = 3/5x - 2
y = mx + b
Let’s examine this equation. X means inputs. Y means outputs. That’s the T-chart numbers.M means the slope (tilt of the line) and b means y-intercept. We’ll discuss the y-intercept another day.
Let’s look at the graphs of these
lines
1. 2.
1. y = -2x +3 2. y = 3/5x - 2
This relationship is always true: Increasing lines have positive slopes, and decreasing lines have negative
slopes. Always!
This fact can help you check your calculations: if you calculate a slope as being negative, but you can see from the graph
that the line is increasing (so the slope must be
positive), you know you need to re-do your
calculations. Being aware of this connection can
save you points on a test because it will enable you to check your work before
you hand it in.
Special equations, graphs, and slopes
Increasing lines have positive slopes; decreasing lines have negative slopes. With this in mind, consider the following horizontal line:y = 4Its graph is shown to the right.
What’s the slope (or, tilt of the line)?
Is the horizontal line going up; that is, is it an increasing line? No, so its slope won't be positive. Is the horizontal line going down; that is, is it a decreasing line? No, so its slope won't be negative. What number is neither positive nor negative? Zero! So the slope of this horizontal line is zero. Let's do the calculations to confirm this value. Using the points (–3, 4) and (5, 4), the slope is:
This relationship is true for every horizontal line: a slope of zero means the line is horizontal, and a horizontal line means you'll get a slope of zero. (By the way, all horizontal lines are of the form "y = some number", and the equation "y = some number" always graphs as a horizontal line.)
What’s the slope (or, tilt of the line)?
Now consider the vertical line x = 4:
Is the vertical line going up on one end? Well, kind of. Is the vertical line going down on the other end? Well, kind of. Is there any number that is both positive and negative? Nope. Verdict: vertical lines have NO SLOPE. In particular, the concept of slope simply does not work for vertical lines. The slope doesn't exist! Let's do the calculations. I'll use the points (4, 5) and (4, –3); the slope is:
(We can't divide by zero, which is of course why this slope value is "undefined".)
This relationship is always true: a vertical line will have no slope, and "the slope is
undefined" means that the line is vertical. (By the way, all vertical lines are of the
form "x = some number", and "x = some number" means the line is vertical. Any
time your line involves an undefined slope, the line is vertical, and any time the line is
vertical, you'll end up dividing by zero if you try to compute the slope.)
WARNING
It is very common to confuse these two lines and their slopes, but they are very
different. Just as "horizontal" is not at all the same as
"vertical", so also "zero slope" is not at all the same as "no slope". The number "zero"
exists, so horizontal lines do indeed have a slope. But
vertical lines don't have any slope; "slope" just doesn't
have any meaning for vertical lines. It is very common for tests to contain questions regarding horizontals and
verticals. Don't mix them up!
y =
Slope = ______
x =
Slope = ______
Find slope from a graph
1.Locate two or three good points on the line.
2.Write each ordered pair.
3.Use the slope formula to calculate the slope of the line.
4.Check the tilt of the line and the slope that you calculated for any mistakes.
y-intercept and x-intercept
The y-intercept means where a line will cross the y-axis.
What is the y-intercept of this line? The variable b is used to represent this intercept in the slope-intercept form of an equation.y = mx + b The x-intercept is where a line will cross the x-axis. It is not indicated in the slope-intercept form.
Identify the slope (m) and y-intercept (b) of each line
1. y= 5x +32. y = -1/2x – 83. y = 3/2x 4. y = -x + 25. y = 36. x = -3
1. m= 5 b=32. m= -1/2 b=-83. m=3/2 b=0 4. m=-1 b=25. m=0 b=36. m=no slope
b=no intercept