the world‘s first breathable chemical …at cost-effective pricing! • ® rev05272014 2400...
TRANSCRIPT
THE WORLD‘S FIRST BREATHABLE CHEMICAL SPLASH BARRIER FOR MANY TOXIC INDUSTRIAL CHEMICALS
IMPERVIOUS (ISO 6350*) TO HAZARDOUS CHEMICALSWHILE MINIMIZING HEAT STRESS
•
THE NEW STANDARD IN INCIDENTAL ACCIDENTAL CHEMICAL SPLASH PROTECTION
Enviroguard Chemsplash 1® is tested for chemical penetration
and permeation resistance by exposure to accidental liquid splash
to a specific list of industrial chemicals (ISO 6350 & EN 368).
* Protection against liquid chemicals. Determination of resistance of materials to
penetration by liquids.
Distributed By:
2400 SKYLINE DR., SUITE 400 MESQUITE, TX 75149 1-800-345-5972int-enviroguard.com
© 2014 International Enviroguard Systems, Inc.
It obsoletes many simple
non-breathable disposable
Chemical protective fabrics
at cost-effective pricing!
•
®
REV05272014
2400 SKYLINE DR., SUITE 400 MESQUITE, TX 75149 1-800-345-5972int-enviroguard.com
© 2014 International Enviroguard Systems, Inc.
CHEMSPLASH 1® BREATHABLE IMPERVIOUS PROTECTIONENVIROGUARD CHEMSPLASH 1® combines the economy of microporous technology with a revolutionary process of creating a surface augmented with additional polymers. The resultant Hybrid Breathable Membrane System is a transformed barrier which retains “breathability” for worker comfort while resisting many chemicals found in the workplace. The seams are stiched and then taped to provide added safety from incidental chemical splash.
Category III:Products which are worn or held in order to protect against any hazard which may be harmful life threatening.
TYPE 5 BS EN ISO 13982-1 : 2004Dry particle suits - Suits for protection against hazardous dusts and any dry particles.
Anti-static EN 1149-1Maximum surface resistivity of 5x1010 OHMS.
EN14126 - Anti-viral barrier testProtective clothing against infective agents - Provides protection against viral, bacteria, blood borne pathogens and body fluids.
TYPE 4 BS EN 14605 : 2005Spray tight suits - Suits which can protect against saturation of liquid chemical, where volume of the liquid builds up on the suit forming pools, resulting in rivulets. Requires a barrier fabric (chemical tests to EN369 Permeation test) and sealed seams - taped seams only.
TYPE 6 BS EN 13034 : 2005Reduced spray suits - Suits for protection against light spray and splashes of liquid chemicals where there is no directional spray or build up of liquid on the suit, but there may be a fine mist of droplets in the atmosphere.
Radioactive contaminationEN 1073 : 2002Protection against radioactive contamination.
AVAILABLE GARMENTSCoverall withattached hood
Standard Coverallwith elastic wrists & open ankles
Coverall with elastic wrists & ankles, no hood
Bib-Style Apron28” x 46”
FABRIC CHEMICAL PROPERTIES TEST METHOD PENETRATION REPELLENCY
n-Heptane 99+% Class 3 Class 1
Dichloromethane 99.9% Class 3 Class 1
Toluene 99.9% Class 3 Class 1
Isopropanol 99.5% Class 3 Class 2
Sodium Hydroxide 50% Class 3 Class 3
Hydrochloric Acid 36-37% Class 3 Class 3
Hydrofluoric Acid 48-50% Class 3 Class 3
JP8 Jet Fuel Class 3 Class 2
Sulphuric Acid 96% Class 3 Class 3
Synthetic Blood ASTM 1670 PASS
WHOLE SUIT TEST PERFORMANCE
Type 4 Spray Test
Method as defined by DN14605:2005+EN468 Pass
Type 5 EN ISO 13982-1:2004
Method as defined by EN ISO 13982-2:2004 Pass
Fabric Compostion Weight (gm/m2)
Total basic weight 65+/-5%
Test Item (Unit) Direction Test Result Test Method
Tensile Strength (N) MD 48.3 ISO13934-1
Trapezoidal Tear (N) CD 108.1 ISO9073-4
Bursting Strength (pa) MD 40.7 ISO13938-1
Punction (N) CD 6.95 EN863
Antistatic (Ohm) Passed( < 5x109Ohm )
EN1149-1
Flammability Passed EN1146
Anti synthetic blood Passed ASTM F1670
Abrasion resistance Class 2( > 100 cycles )
EN530
Anti Chemical penetration Passed EN374-3
Hydrostatic resistance (cm) 226 ISO 811
M.V.T.R. (gm/m2.mtr.24hr) Above 3000 ASTM E96
*This fabric and garment is not for use with some chemicals and hazardous agents and it is the user’s responsibility to determine the level of risk and the proper personal protection needed.
T = Taped Seam S = Sewn Seam.
#7012YT6 per case
#7012YS12 per case
#7013YT6 per case
#7013YS12 per case
#7015YT6 per case
#7015YS12 per case
#702846Y
100 per case
#7019YT6 per case
#7019YS12 per case
#7065YT#7065YS
100 pairs per case
Coverall with Hood & Boot
Sleeves,18” Length,