The universe in absolute time 0

Dwayne Huang

Abstract

By geometric topology, it found the structure model of universe space in

absolute time 0. The fundamental theory is change inconstant into

constant. It avoided the space derivation of sense by entirely change

time expression into space expression. For a point P on Greenwich, the

timeline is the perimeter C0 of weft W which crossing the point P. Define

the weft perimeter is L, when the point P changed in another position F

on weft W. The weft W is divided into two length PF and L-PF. By

exchange in Equal Effect of effective space, it topology all point of

Greenwich, ∑C0 is the expression of absolute time 0 that entirely

changed into space expression. General Formulas of ∑ C0 is

C0=C1+C2…+Cn (∞≧n≧2), when point P is on the pole, n is the

minimum number. It is C0=C1+C2. When point P is on equator, n is the

maximum number. C0=C1+C2…+C∞ . And then it removed space

derivation of sense By Boundary Effect. Above is the process of removed

derivation of observer. After instituted the absolute space derivation of

observed object, it finally get the geometry of (the Universe In Absolute

time 0, UIA). It extremely similar with Fluctuations in the (Cosmic

Microwave Background, CMB)[1]. It proved the asymmetry of CMB.

Key-word: Scalar space in equal effect; Boundary Effect; the universe in absolute model

Dwayne Huang. E-mail：dwayne2010@163.com

Version 3: 2016.03.14

1 Introduction: with the macro and micro physics development, human

already found some phenomenon in universe. Is there a unified theory

behind phenomenon? In modern science increasingly fine today, is there

a simple method to explain the universe? Maybe the ancients already

show the revelation.

2 Axioms and hypotheses

Hypotheses 1: there is a point in a constant space.

Question 1: why it is a constant space?

Axiom 1: Inconstant expression in a moment, it is change into constant

expression. Such as pause a movie, the screen is stable.

Extension of axiom 1: in an inconstant expression, the constant is unique.

Axiom 2: the change based on a constant, effective space is equal with

last effective space that steps by minimum time unite. Such as an object

with length A at moment T, it moves on axis X. In minimum time unite t,

it moved length B on axis X. Total space of the object change moment, it

is A+B, but the length of object itself always length A. it is Scalar space in

Equal Effect (SEE in short).

x(T)=x(T-t)

Extension 1 of axiom 2: In the expression of absolute time 0, effective

space of other time (except absolute time0) is equal with the effective

space of absolute time 0.

x(T)=X(T-n)，and T≥n≧0。

And because SEE, so x(T)=x(0)

The derivation starts from empty as fig.1. Based on empty it hypotheses

there is a point in dimension change. The line represents the distance of

the point, so a length (distance) represents a space.

According axiom 2, as fig.2 the line is equivalent to a point on circle C0.

And the tangent of the point on circle C0, it represents the direction of

a b

图 1 点位变化(a) 维度变化前；(b)维度变化后

Fig.1 position in change (a) before dimension

change; (b) after dimension change

space change. The moment (time) of point O, it is changed into the space

change of point P.

Question 2: why is it a circle to expression equal space, why not other

curve?

Answer: only circle meets Scalar space in equal effect. (Passive choose)

Question 3: why it use tangent to express the direction of space change?

Answer 3: Any direction of space change, it can be expressed by tangent

and normal. Because the normal is same with the line PO, the change in

normal it doesn’t show in the dimension projection from point O to point

P. It is invalid expression of space change.

Axiom 3: in ideal, after a space divided into n length, the total space is

same. Such as a rope with length C0, it divided into n lengths in ideal.

The total length of divided ropes always is C0.

C0=C1+C2…+Cn (n is nature number，and ∞≧n≧2).

图 2 等量空间示意

Fig.2 equal effect of space

change

P

O

3 geometry derivation

3.1 relativity time

When point p is endless minimum, it is pole. The space change of warp

which point p is on, it is C0=C1+C2 (C0=C1+C2…+Cn, n is nature number,

and n=2). Because all points on a same warp, they represent in a same

time. So relativity time, it is the relative space change between the point

on pole (C0=C1+C2…+Cn, n=2) and equator (C0=C1+C2…+Cn, n=∞). After

topologies the spaces change of the equator into the space change of

the pole. The PF and L-PF of equator, relatives change on the space

expression of pole as fig.3. Based on pole (C0=C1+C2), the part in white

is space change of C1, and the part in red is space change of C2.

As fig.4a by a step of a point change, it explains C0=C1+C2 change after

equator topology.

1) According SEE, so C0 and C1 and C2 they are circles. According

图 3 一个点的空间相对变化 (a) C1 部分；(b) C2 部分

Fig.3 a point in relative change (a) part C1; (b) part C2

(a) (b)

x(T)=x(0), so they are in a same scalar space between pole position

and equator position. Use symbol Sp to represent scalar space, so

Sp2= Spn (∞≧n≧2,the number of n it represents the relative

position of cross point S1 on weft W). Use symbol Cp to represent

perimeter, and wherever point S1 is, it always meets:

Cp0=Cp1+Cp2

2) It is the change of one same position, and it meet SEE, so the center

O1 of circle C1 is on the circle C0.

3) It is the change of one same point, and it meet SEE in continuous

position, so the cross point S1 of circle C1 and circle C0 is on circle C2.

4) Because extension 1 of axiom 1, they are in a same direction of space

change on two continuous position. So the center O2 of circle C2 is on

the line O1S1.

As fig.4b and 4c, when Cp1=0, Cp2= Cp0. When Cp1=Cp0, Cp2= 0.

5) According extension 1 of axiom 1, the time of point O change is

图 4 一个点位的空间相对变化 (a) ∞>n>2 时，；(b) n=2 时；(c) n= ∞时

Fig.4 a point position in relative change (a) ∞>n>2; (b) n=2; (c) n=∞

(a) (b) (c)

Cp0 Cp1

Cp2

Cp1=0

Cp0 Cp2=Cp0

Cp2=0

Cp0

Cp1=Cp0

constant (in a same time), any expression from circle C0 must back on

circle C0.

6) According extension 1 of axiom 2, because x(T)=x(0), in the space C0

(the length of perimeter of circle C0). It is the position expression

when Cp1=0, it is SEE with the position expression when Cp2=0.

Because C2=C0-C1, so it define the point on circle C1 when Cp2=0 to

point O1n (n=∞). Refer the start point position on weft to understand

point O1n.

The change between circle C1 and circle, it finally makes two points

O11 and O1n in SEE. Because these two points are in SEE, so the relative

time on circle C0 between point O11 and point O1n, the time is 0. As

fig.5 the invalid space on circle C0, is 1-3/4 Cp0. It is the relative space

change of time expression.

As time is built by moments, the weft is built by points. The

O1n

O11

图 5 相对时间表示中的有效空间

Fig.5 effective space in relative time

expression Cp0=cp1+cp2, it is the relative space change of circle C0 by

circle C1 and circle C2. And it is one point change of equator. Extend the

expression C0=C1+C2, the change of any point on equator, always meet

invalid length on 1/4 Cp0.

∞≧n of C0=C1+C2…+Cn, it defined the space itself is in endless

dimension. Invalid length on 1/4 Cp0, it defined the expression of space

change (space-time) is 4-dimension. Effect length on 3/4 Cp0, it defined

the space is 3- dimension in space-time.

3.2 Absolute time

As stars people see, they are light start from distant time. The

expression of absolute time 0, must be removed the deviation of sense

space itself.

The deviation of sense space itself, it is the invalid space expression

in effective space expression. In expression C0=1+C2, C1 and C2 are

complement each other. As fig.1 including point O, one more position

can represent dimension change. And because x(T)=x(0), so other

expression between x(T) and x(0). In expression C0=1+C2, the C1 is the

middle change between C0 and C2. So part C1 is invalid space. Remove

the relative deviation between from C1 to C2, it will get the expression of

absolute time.

3.2.1 The space form of sense——Boundary Effect

What’s space form of sense? The answer is in a game. As the black

virtual wireframe in fig.6, it is the scalar space. Each block represents a

point, and all block’s expression is in the scalar space.

As four wireframes in yellow in fig.7, the white diamond block represent

sense origin, and these four blocks represent the space form of sense.

图 6 标量空间示意图

Fig.6 simplified diagram of

constant space

意识

原点

图 7 意识空间示意图

Fig.7 simplified diagram

of sense space

As fig.8 in scalar space, the space form of sense collapsed with time

changing. And the relative space of later dimension expression will step

in collapsed space form of sense.

As fig.9 three blocks in yellow wireframe, they are not original blocks.

They are supplement from outside of the scalar space (in later

dimension). As the position of white diamond in black virtual wireframe,

it is the most outside position in original four blocks of sense space form.

图 8 意识空间坍塌示意图

Fig.8 simplified diagram of

sense space collapse

图 9 意识原点变化示意图

Fig.9 simplified diagram of

sense origin

Extract these four block position, we don’t know what exact space form

of sense, and even we don’t know where the sense origin of sense space

is. But only one thing is sure, the sense origin always is the most outside

of supplement space. Boundary effect is in the sense space change.

3.2.2 Relative switch of space deviation

Two opposite moving objects as fig.11. If object A is set as observation

point, the movement of object A will be switch onto object B. Based on

time, it is the switch of space.

1

2

3

4

1

2

3

4

1

2

3

4

1

2

3

4

1

2

3

4

图 10 意识原点变化示意图 (a)在上一梯度空间

中；(b)空间补充后

Fig.10 Position change of sense origin (a) in last

ladder space; (b) after space supplement

(a) (b

)

A B

Va Vb

A B

Va+Vb

A B

S=(Va+Vb)*t

图 11 运动的相互转换

Fig.11 switch in motion

Fig.12 is the answer how to switch. Because the change of part C2 it is

based on part C1, so part C2 will be transfer with part C1.

1) Derivation is start from a point to a line, it is not circle. So the real

effect space form is linear, it is a radius, not diameter, not perimeter.

2) According Boundary Effect, so the starting point of switch, it is the

cross point between circle C0 and circle C1 and circle C2.

3) Part C1 is invalid space, so part C1 will be switched.

4) Per C0=C1+C2，so C2=C0-C1。

5) Put C2=C0-C1 into C0=C1+C2，get C0= C1+(C0-C1)。So it should be

switch 2* radius of circle C1.

6) Because extension 1 of axiom 1, they are in a same direction of space

change on two continuous position. So the switch is along line O1S1.

As fig.12 it transfer circle C1 and circle C2 from point S1 to point S2

(along line O1S1). It get circle C1’ and circle C2’. The center of circle

C1’ it is point O1’, and the center of circle C2’ it is point O2’.

O2 O1

O

0

C0 C1 C2

C1’

C2’

O1’

O2’

S

1

S2

图 12 点位的相对失效空间的转换

Fig.12 switch of point position for invalid

As fig.13 based on Cp0=Cp1+Cp2, it gets switched relative effect space, it

is the invalid space of point switch. It is C0= C1+(C0-C1)

And then remove deviation of sense direction itself by reverse 180°

In expression of C0= C1+(C0-C1) as fig.14, the part in white it is relative

with part C1, the part in red, it is relative with part C2.

图 13 点的相对失效空间的转换 (a)转换前；(b) 转换后

Fig.13 switch of point for invalid (a) before switch; (b) after switched

C

2’

C

1'

C

0

C

1 C

2

C

0

a b

图 14 非失效和有效 (a) 非失效；(b) 有效

Fig.14 Un-invalid and effective (a) no-invalid; (b) effective

Part C1

a b

Part C2

After removed sense space deviation, the original radius (r) of circle C2,

it is changed into R=√5*r. The cross point S0 between C0 and C1 that is

topology from equator, it is changed onto point S0’. Because x(T)=x(0),

there is a space distortion between point S0 and point S0’.

Sum of all effective space, it is the planer form of space-time as fig.16.

2*r

r

图 15 相对空间扭曲

Fig.15 distortion of relative space

S0’ S0

图 16 时空(相对二维表示)

Fig.16 Space-time (in relative 2-D)

As hypotheses 1, derivation start in a constant space, it must be back in

space finally. In expression C0=C1+C2…+Cn (∞≧n≧2), from C1 to Cn

each point position it is relative with a dimension ladder. It get

space-time expression by the center O of circle C0, and then it get the

space expression based on space-time expression by next point position

P. It get the space expression of next dimension ladder by the space-time

expression of last dimension ladder.

Fig.17a and fig.17b and fig.17c, they are representing part C0 and part

C1 and part C2.

Based on space-time, each expression is built, so now it is expressed by

geometric area calculation. The first change position is part C1, so as

fig.17d it is C1=C0-C2.

It removed sense space deviation by transfer 2*r (radius of circle C1). So

based on C1=C0-C2, it subtract 2*C1 in both side, and then it get

C1-2*C1=C0-C2-2*C1

Per Relative switch of space deviation, part C1 and part C2 are

transferred, so plus C1+C2 in both side. Finally it gets

C2-C1=C0+2*C1-2*C1

The next ladder dimension is start from part C0, so per C1=C1+C2it get

0=C0-C1-C2.

And the position change of next ladder dimension is start from part C1,

plus C1 in both side, it gets C1=C0-C1-C2+C1

It is C1=C0-C1-(C2-C1)

Finally C1=C0-(C1+(C2-C1))

When Sp0=Sp1, it means C1=C0.

And C1=C0-(C1+(C2-C1))

Finally (C1+(C2-C1))=0

The part in white in fig.17f, it is the expression of (C1+(C2-C1))=0. It is the

part can be sensed directly. And the part in black in fig.17f, it cannot be

sensed directly, but it will be relative sensed in later dimension ladder.

3.3 space-time distortion of observed object

The expression (C1+(C2-C1)), it cannot be 0 directly. It will be set only

b a c d e f

图 17 时空交变过程 (a)上一梯度 C0；(b) 上一梯度 C1；(c)上一梯度 C2；(d)

下一梯度中相对失效 C0-C2；(e)下一梯度中相对非失效 C2-C1；(f)相邻梯度的

绝对时间 0=(C1+(C2-C1))

Fig.17 Switch progress of space-time (a) part C0 in last ladder dimension; (b) part

C1 in last ladder dimension; (c) part C2 in last ladder dimension; (d) relative

invalid part in next ladder dimension; (e)Relative no-invalid part in next ladder

dimension; (f) absolute time between ladders 0=(C1+(C2-C1))

based on Sp0=Sp1. Sp0=Sp1, it means the distortion of space-time in

observation.

At first the radius r of circle C1 is switch into √5r by transfer 2*C1, so it

get a (√5-1)r/2 distortion on change direction of circle C1 (in normal of

point P on circle C0). And per C2=C0-C1, it get a (1-(√5-1)/2))r distortion

on change direction of circle C2 (in tangent of point P on circle C0).

Including C0 of next dimension ladder, it get (1+(1-(√5-1)/2)))r distortion

on change direction of circle C2. After space-time distortion, fig.17f is

switched into fig.18b (The Universe In Absolute time 0, UIA in short). Per

fig.18, UIA is extremely similar with CMB. And UIA prove the Asymmetry

of CMB.

4 UIA in ancient china

In ancient china, people already realized UIA.

1) According Primitive Eight-Trigram[2], there is a saying: everything we

sensed it is beginning from Zhen-diagram, and it is end in

Gen-diagram.

(a)

图 18 (a)宇宙微波背景辐射；(b)绝对时间 0 的宇宙

Fig.18 (a) CMB; (b) The universe in absolute time 0

(b)

2) According Posterior Eight-Diagrams[3] and Twelve-Earthly Branches[4],

there is a saying: the thing behind sense, it is start from Shen-Earthly

Branches, and it is end in Mao-Earthly Branches

3) As fig.20, the copper coin in ancient china, it contains UIA.

5 Summary and further research

图 20 古代中国铜钱中的 UIA

Fig.20 UIA in copper coins in ancient China

The article is based on 2-dimension visual, it prove a united absolute

model of the universe in space-time. Except the 1-dimension that

express sense itself. It still remains a 3-dimension visual to research

further.

Reference

[1] NASA http://wmap.gsfc.nasa.gov/universe/bb_cosmo_fluct.html [2016-3-09]

[2] Hu Wei (Dynasty Qing, author) Wang Yi (modern, sorting) 1991 <distinguish of

Yi-Chin image> [published by Bashu bookstore] P150;

[3] Hu Wei (Dynasty Qing, author) Wang Yi (modern, sorting) 1991 <distinguish of

Yi-Chin image> [published by Bashu bookstore] P192;

[4] Hu Wei (Dynasty Qing, author) Wang Yi (modern, sorting) 1991 <distinguish of

Yi-Chin image> [published by Bashu bookstore] P63;