the original lumberman's magazine brought to you by lbx online

DEALS OF THE MONTH

WWW.LBXONLINE.COM

For classifieds call (800) 315-9950 or (615) 349-1890 or

Since 1986 - The Original (800) 315-9950 or (615) 349-1890

February 2012

With your smart phone: Scan QR Code to visit—

‘09 DYNAMIC 585 WHOLE TREE CHIPPER

NEW! Only 15 hrs. MUST SELL!!Item ID: 12400Contact: TomPh: 800-315-9950 x604

W/CIRCLE SAW; VERY HEAVY DUTY!!tem ID: 12428Contact: DarenPh: 800-315-9950 x603

PORTABLE FIREWOOD PROCESSOR

2 The Original Lumberman’s Exchange Visit us online at www.LBXonline.com!

For Classifieds Call Your LBX REP at 1-800-315-9950 February 2012 3

Traveling Arch SawHydraulically controlledNo manual cuttingOur most popular turn key system

Portable Yard SawModel 200MP-7-SS GasModel 100MP-7-SS Electric3 inch side shift, a standard feature

Automatic Strapping SystemAttach bottom crossersSide squeeze incorporatedPolyester strap Flush End Bump Rollcase

Reduce or eliminate your end trims

L-M Deck Cut Off Saw3 foot to 12 foot bar lengthsHydraulically controlled

PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL!

The New L-M �“I-CUT�” Bundle cross cut system!* 60�’ long frame to precision cut your I-Joists* Precision accuracy of +- 1/32�”* Shorter system are available to process all your cutting needs* Tremendous labor savings, Guaranteed!

L-M Equipment Co. LtdPhone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: [email protected]

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!


No matter your project size, Fecon’s durable Bull Hog® mulchers are up to the job. For 20 years, we’ve made your tough tasks easier – from trail maintenance and vegetation management to clearing for utilities and national pipelines. See how your Bull Hog® can boost productivity.

800.528.3113 fecon.com


FOR CLASSIFIEDS Call 800.315.9950

See pictures, prices, and Location of all equipment at

www.LBXonline.comCHIPPERS

2008 Dynamic 585 Chipper - Factory Rebuilt with upgraded components including new discharge chute, new larger bearings, new larger feed pins, new access panels to chip chamber wear plates. JD 500 HP engine with 2200 hours. Limited factory warranty on upgraded features. - Item ID-12059 - Tom 800-315-9950 x60448” Precision Chip Pack - Precision 48” 3 knife chip pac, 5x5 screener, with a brand new Y valve, 100 hp electric motor on the chipper, 15 hp motor on the blower, and a 3hp motor on the shaker. This machine is in very good condition and is ready to work. There is a vibrating conveyor available with this machine. Ask about details and price. - Item ID-12128 - Daren 800-315-9950 x603Precision 58” Chip Pack - Complete refurbished Precision 58” Chip Pack. This machine is been completely refurbished and is ready to work. - Item ID-12233 - Daren 800-315-9950 x603Precision 58” Chipper - Complete rebuilt Precision 58” Chipper with Factory Warranty. - Item ID-12232 - Daren 800-315-9950 x603Trelan DL18 Whole Tree Chipper - Powered by a 475-hp Cat 3406 diesel engine. Approx. 1020 hours, new 1/2” steel face plate, seperator, Has a knuckleboom loader. Will chip up to an 18” diameter log. Is pulled with a semi tractor. Cab has sound protection and heat. Rebuilt from the ground up, new wheel bearings, new face plate for chipper wheel,

Original

The Original Lumberman’s Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ad-vertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lumberman’s Exchange, its prin-ciples and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited with-out written consent.

©2011 by Woods Publishing.

** Auctions **ALEX LYON & SON — Page 11

www.lyonauction.comLATE MODEL CONSTRUCTION EQUIPMENT

Tuxcaloosa, Alabama

Your #1 Source for Forest Industry

Products!

The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial wood-working plants.

PUBLISHER Woods Publishing

ADVERTISING SALES Morris Woods (615) 349-1890 [email protected]

DESIGN DIRECTOR Heninger & Associates [email protected]

EQUIPMENT REPS Equipment Representative Daren Bodine (800) 315-9950 x603

Equipment Representative Tom Hirt (800) 315-9950 x604

MAILING ADDRESS P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax

AD SUBMISSIONS May be sent to— [email protected]

POSTMASTER Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402

** CALENDAR **OREGON LOGGING CONFERENCE (See pg. 39)Coming Feb. 23–25, 2012 Eugene, Oregon

WOOD TECHNOLOGY CLINIC AND SHOWPostponed Indefinitely See www.woodwideweb.com for details.

EXPO RICHMOND 2012Coming May 18–19, 2012 Richmond, Virginia

** INFO LINK **AJD Forest Products ................37

Alex Lyon & Son Auction .....11

Amark ..........................................7

B & B Mfg. .................................29

B. H. Payne ................................13

Baker .....................................6, 14

Bartlett Saw Service ................26

Bay Equipment .........................28

Buck Equipment (AIM) ...........17

Cord Master ..............................20

Corley Mfg .................................33

CRD Metalworks .......................10

CW Mill (Hogzilla) ...............1, 7

Dyna Products ..........................18

Fecon ...........................................4

Kasco-SharpTech .......................9

Lignomat ...................................21

Litco ...........................................13

LM Equipment, Canada .............3

LogMax ......................................12

Logical Fiber .............................34

M&F Gauge ................................17

Machinery Sales Co., Inc. ..........8

Midwest Sharpening Service ..19

Multitek .....................................16

Oregon EXPO ........................39

Phase-A-Matic ...........................21

Piper’s Saw Shop ......................30

Resource Recovery ..................35

Richmond EXPO ....................38

Rotochopper ............................40

Row Electric..............................25

Sawmill Exchange ....................31

Suffolk Machinery ......................2

Texas Timberjack .....................15

Thomas Tire .............................27

TNT Transport Services..........22

Universal Refiner.....................24

US Blades ..................................36

Weaver Electric ........................32

Woodmizer ................................23

The Richmond ShowEXPO RICHMOND 2012

See page 38

If y

ou

ne

ed

to

Ch

an

ge

yo

ur

Ad

dre

ss o

r

Ad

d Y

ou

r N

am

e t

o o

ur

ma

ilin

g l

ist,

th

en

p

lea

se c

om

ple

te t

his

fo

rm a

nd

ma

il t

o:

The

Original L

umbe

rman

’s E

xcha

nge

Ple

ase

Add

Ple

ase

Chan

ge

Ple

ase

Rem

ove

Co

mp

an

y N

am

e*

*Com

pany

nam

e an

d ad

dres

s re

quire

d to

pro

cess

you

r cha

nge.


EQUIPMENTREPRESENTATIVES

Daren Bodine Phone: 800-315-9950 Ext. 603

Tom HirtPhone: 800-315-9950 Ext. 604

CALL US TODAY FOR ALL YOUR USED

EQUIPMENT NEEDS!

FREE EQUIPMENT LISTINGS! CALL –(800) 315-9950

The Most

Popular Band

Resaw in the

World!

The Model “A” Baker Band Resaw:One of the All-Time Greats!

[email protected]: (800) 548-6914www.logtolumber.com

DEALS OF MONTH FROM-JANUARY–

For classifieds call (800) 315-9950 or (615) 349-1890

See Photos online at— www.LBXonline.com

‘09 DYNAMIC 585 WHOLE

TREE CHIPPER

NEW! No Better Price Anywhere!Item ID: 12400Contact: TomPh: 800-315-9950 x604

PRICED TO SELL FAST!tem ID: 12428Contact: DarenPh: 800-315-9950 x603

‘98 ROTOCHOPPER 166 w/Coloring

System

With your smart phone: Scan QR Code to visit—

changed Detroit engine to Cat engine went from 300-hp to 425-hp, added new belts and heavier bearings. Only run about 6 months after rebuild. Can be used to make fuel-wood. Is ready to go, needs no work. Was manufactured in the mid 80’s. extra knives that come with it - Item ID-11292 - Michelle 800-315-9950 x603

COMPLETE SAWMILLSCircle Sawmill - Includes Mellot conveyor, Carthage carriage, Helle setworks, Helle log turner, hydraulic power pack 25-hp, 100hp

electric motor, 25hp electric motor and all starters. - Item ID-11992 - Michelle 800-315-9950 x603Frick Automatic Sawmill - Frick Automatic Sawmill, 3 Head Block, Tyrone Berry Feed, 250 H.P. Cummins Power Unit, 4 Strand Live Deck With Stop And Load, Chain Type Log Turner, Frick Edger, Live Rollers, 30 Ft. Live Belt, 18 Ft. Green Chain. Ready To Work! - Item ID-12217 - Chris 800-315-9950 x600Meadows #2 Sawmill - Meadows #2 carriage - 15’ OAL with 4 headblocks - 3 hydraulic dogs - 5 axles, hydraulic setworks with pantograph arm assembly to carry hydraulic & electric lines from carriage to husk - clock face lumber dial - controls for setworks & dogs. Meadows #2 track frame, with idler assembly. Reckart hydraulic feed package with 40-hp electric motor. Mellott log turner. 35’ log deck with stop & load. 130KW generator. - Item ID-11086 - Michelle 800-315-9950 x603

FIREWOOD PROCESSORS2001 Timberwolf Pro MX VERY LOW HOURS!!! - 2001 Timberwolf Pro MX, 447 hours, 49 hp Kubota Diesel engine, 24ft timberwolf conveyor with a 5hp honda engine, All hydraulic, live deck, log clamp, chain saw, sharp chain feed through,


Let us reprocess them $25 per 100

Now have Factory Seconds $25 per 100 sticks

Save Your

Stubs & Pieces!

Now AcceptingVisa & Mastercard

2010 Prentice 2670 w/Bunching HeadItem ID: 12452Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

1995 Timbco 445 w/Quadco HotsawItem ID: 12388Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

6-way hydraulic adjustable wedge, live deck lifts up for towing (ELECTRIC WINCH W/10’ REMOTE) - Item ID-12438 - Daren 800-315-9950 x6032003 CordKing 60 With Cordking Conveyor - 2003 CordKing 60 With Cordking Conveyor, 1 Owner Machine, Approx. 3000 hours, 12way

wedge, 58 Ton cyclinder, operators cab, This Machine has always been kept under cover. It is turn Key and ready to work!!!! - Item ID-12442 - Daren 800-315-9950 x603Best Value Portable Log Splitter - Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start

but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA - Item ID-12062 - Tom 800-315-9950 x604Blockbuster Firewood Processor Model 2220 - Processes 2-3 cords per hour. Model 2220. - Item ID-12437 - Michelle 800-315-9950 x603Firewood Processor Single man operation with Circle Saw - Firewood Processor Single man operation with 48” Circle Saw, 2-3 second cycle time, 2 spliting stations, 25’ Timberwolf hydraulic conveyor with a honda engine, 3 extra blades, 3 wedges (6way square, 6way round and a

8way round) 353 Detroit Power unit. This machine will fill a 30 dump trailer in less than 5 hours with one man doing all of the work!!! I also have 2 videos of this machine running. - Item ID-12370 - Daren 800-315-9950 x603New 2010 Puma Model 18GM Firewood Processor - Brand New. Can produce up to 2 cords/hour. The 18 GM Firewood processor is the introductory PUMA model. Standard features include a live deck, fold-able stacking conveyor, and a foldaway hitch for easy storage. The 18GM Firewood processor is capable of splitting up to two cords per hour at the centralized operator station.


Mereen-Johnson 48” RipsawMereen-Johnson 424DC RipsawPaul Gang RipsawPinheiro Dip Chain RipsawSalem Late Model Combination Edger

FILING ROOM EQUIPMENTArmstrong 3-10C Stretcher RollArmstrong Dual Side GrinderArmstrong No. 4 B.S. Stretcher RollArmstrong No. 4 LH B.S. GrinderArmstrong No. 4 RH B.S. GrinderArmstrong No. 25 CircleArmstrong No. 90 Equalizer Gockel 163” Mag Bed GrinderHanchett 84” Challenger GrinderHanchett DN-40 Knife GrinderHanchett Knife Grinders (10) Newman G-200 GrindersVollmer Cana E (8)Vollmer CH210 Auto Sharpeners (2) Weinig R 934 Profile Grinder Wright Mod. 1801 (3) Wright W-1600 Auto Tipper

HOGS & PULVERIZERSGruendler 50XE Hammer HogJacobson Hammer Mill Jeffrey 36 x 60 ShredderJeffrey 76WBH Horiz. HogWest Salem 38” HorizontalWest Salem Big Brute GrinderWilliams 30KS Hammer Hog

MISCELLANEOUS5-Arm Hyd. Tilt Hoist 10’ Hydraulic Lumber StackerCEMCO Combination Planer/Sander Fruilmac End MatcherHurricane 28” Chop Saw Industrial 3496 Finger JointerIndustrial FJS-25 Finger J. SystemIrvington 20’ Trimmer, 1’ Saws L&M Log Cut-Off Saws

(866) 241-2977

OVER 13 ACRES OF GREAT BUYS ON USED EQUIPMENT!For complete equipment list, visit our website:

OR CALL AND ASK FOR DEPT. LX

Woods Planers 412M, 414M, 407M, 409M. 415M Woods Moulder 132M

Yates Planers A-20, A-62, A-66 Stetson-Ross Planers 6-12-A1, 6-12-C1, 6-10-A1, 6-14-D1

Mattison Moulders 276, 226, 228SAVE BIG ON MOTORS AND MAJOR PARTS!

WE ARE PARTING OUT

WORLD’S LARGEST INVENTORYNew & Used Sawmill & Planing Mill Equipment

9802 North Vancouver Way

Portland, Oregon 97217

WE ARE OVERSTOCKED! PRICES REDUCED!TAKE ADVANTAGE OF THIS CHANCE TO SAVE BIG!

BANDMILLS & HEADRIGSKockums 6’ Air Strain BandmillL&B 6’ Air Strain TwinsMcDonough 62” Twin Air StrainMebor Horizontal BandmillSalem 6’ Air Strain BandmillSalem 5’ Air Strain Bandmill

CARRIAGES & DRIVESCorley 40” Hydraulic 3-BlockSalem 24” 3-Block Linear Carriage Salem 42” 4-Block CarriageSalem 60” 4-Block CarriageSalem Linear 36" 2-BlockTyrone 240 Hydraulic Drive USNR 2000, 42" Stud Carriage

CHIPPERS & SCREENSArasmith Lilly Pad ChipperBM&M 5’X14’ Screen CM&E 36” Rechipper Kockums 66” Horiz. Feed Precision 8X8 ScreenPrecision 48” 8-Knife Drop F.Precision 48” Horizontal F.Precision 58” Horizontal FeedPrecision 66" Horizontal F.Precision 96” Whole LogPrecision 118” HFBD ChipperRotex 6’X16’ ScreenWest Salem 58” Horizontal Feed

DEBARKERSNicholson 22” A-5 Debarker

EDGERS, GANGS & RIPSAWSGlobe Panel RipsawGlobe Strip SawKimwood Short Block Ripsaw

Lumber Stackers (3) Peerless 24-Unit Bins (2)Producto Dog Ear Machine Tektronix Log Metal Detector Timesaver Sanders (6)

PALLET EQUIPMENTBronco 2006 Pallet NailerPallet Repair Systems NailerSmetco Pallet Turner

PLANERS & MOULDERSBuss 55 Double SurfacerBuss 88 Double Surfacer Coastal 16-Knife 9” Planer Pkg. Coastal 24” 20-knife PlanerDiehl 6-head TF MoulderMattison 226 12” MoulderMattison 228 16” MoulderNewman 382 Double SurfacerNewman M712 12-Knife Northfield Double SurfacerS-R 6-14-D1 24” 16-KnifeS-R Chip BlankersS-R 6-10-A1 10-KnifeStetson-Ross Timber SizerWadkin 6-Head MoulderWeining 22A 5-HeadWeinig 22B Complete Line Weinig U22A, 6-head Weiniig P22N 5-HeadYates-A-63 16-Knife Planer Pkg.

RESAWS36” Tri-State Tilting ResawBaker BBG-O Two HeadBaker BBR-O 12” ResawKockums 6’ Horiz. Twin Air StrainMcDonough 54” Twin HorizontalSalem 5’ Air Strain HorizontalSalem 6’ Horiz. Air Strain Smith Twin Horizontal ResawTurner 48” Rollfeed ResawTurner 52” Rollfeed Resaw


Morbark Model P-S Post PeelerGood Condition, S/N #368; As is: $9200,

F.O.B. Lewiston, Idaho

(208) 743-5501

‘98 CAT 525 Grapple SkidderItem ID: 12429Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

West Salem Grinder & Gen SetItem ID: 12386Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

Lincoln 3-Phase 100hp Electric MotorItem ID: 12436Contact: Michelle800.315.9950 Ext. 603www.LBXonline.com

The 18GM is built with heavy-duty construction, offers a quiet Honda engine, and is perfect for the small start-up operation or weekend warrior. - Item ID-12299 - Tom 800-315-9950 x604Portable Firewood Processor with Circle Saw - Firewood Processor with a 48” Circle Saw, Powered by a 6cyl Perkins Diesel, 165 hp, 20’ conveyor, Pintle hitch, 6way wedge, It is a heavy-duty machine in ready to work condition. Comes with a 100hp electric motor as well - Item ID-12435 - Michelle 800-315-9950 x603

FORKLIFTS1994 Moffett Truck Mount Fork Lift - Very clean machine. Runs well. Owner using now. 2686 Hours.

Priced to sell. Great for delivering products or working in warehouse with high reach. This is a bargain! - Item ID-12321 - Tom 800-315-9950 x6042004 Moffett Model M5500 Truck Mounted Forklift - 1418 Hours; Kubota Diesel; 4’ Forks, Side shift, 4 Way steer, 12’ Mast, Tires Front 31.5X13-16.5, Rear 31X15.5-15. If you deliver products on a truck, this forklift goes with you. Top brand in the industry. Priced to sell. - Item ID-12069 - Tom 800-315-9950 x604

HOGS/WOODGRINDERSWest Salem Grinder and Gen Set - Model WSM 2822, With a Cutler Hammer Soft start. There is also a full set of extra hammers that go with it plus one original from

factory to use as a pattern when rebuilding the others with hard surfacing. The gen set is a 360 KW with a Big Cam 855 Cummins engine. Extremely low 670 Hours. Owner is negotiable. - Item ID-12386 - Daren 800-315-9950 x603

LOGGING EQUIPMENT1995 Hanover Model D3 Forwarder - 5156 Hours. Loader has great lift capacity. Tires 70% or better. Adjustable bunk extension for longer wood. New exhaust. New batteries. Strong engine and transmission. Has 8 work lights. TX - Item ID-12162 - Tom 800-315-9950 x6041995 JD 290D with Hytec 4700 Harvester Head - 290D in good condition. Engine just overhauled. Undercarriage at 50%. Cab has heat and air with stereo and all run well. Head recently updated and does great job in hardwood with stroker extension that shoots out at tough limbs. Priced to sell! - Item ID-12206

- Tom 800-315-9950 x6041997 MACK CL713 with 18ft Petty built Pup trailer - 1997 Mack CL713 EZ427 replacement engine with 220k in Dec. 09, NEW! 18sp tran replaced by Mack Dec.08, 120C Prentice Loader, 22.5FT Rack, with Petty Built Pup Trailer (18.3ft).... Drive tires are at 40% and ster tires are rated at 50-60% - Item ID-12130 - Daren 800-315-9950 x6031999 Mack Truck with Prentice 120 - Mack engine and transmission. Runs good. Strong Prentice 120E Loader. Very nice package. - Item ID-12448 - Tom 800-315-9950 x6042000 Sterling Road Truck/Tractor - Truck has 259 k miles, a N-14 Cummins 370+ engine, 9 spd. trans. 4:10 rears with 4 air bag tandem axle, 24.5 rubber almost new. Runs Great! Includes wet line kit on truck. FOB: NC - Item ID-12323 - Tom 800-315-9950 x6042001 MCB 621REG Trommel Screen with Radial fines

Now, Three Ways to Make

Your Day More Profitable

WOODBINE FIREWOOD PROCESSORS

PERFORMANCE POWER PROFIT

50' slasher saw with 8-way wedge.Take on huge yields with a reasonable pricepoint.

$54,900

Smaller, but just as powerful.4 Cords/hr. up to 16" diameter wood.

$46,900

1

3

Let us show you the Woodbine way........$67,900

MADE IN USA


conveyor - This is a 2001 MCB 621REG. Radial fines conveyor, fixed overs conveyor, tipping grizzly bars, radio remote. It has just over 8,200 hours, has had the drum replaced, has new rollers, and a new belt and it was just sand blasted, painted and has all new decals. Also, one of the grizzly tipping cylinders was just replaced, and other work has just been completed. The machine runs great and is ready to go to work - Item ID-12358 - Daren 800-315-9950 x6032002 New Holland TV140 w/10’ Brush Cutter - Only 3000 hours. Very well maintained. Brush Cutter has less than 500 hours. Complete with winch and forestry package. Tires at 80%. Comfort cab with great visibility. Extremely productive and stingy on fuel. - Item ID-12414 - Tom 800-315-9950 x6042005 Takeuchi Supertrack Skid Steer with B74 Fecon

Head - 981 Hours. 102 HP Engine. New Tracks. Fecon B74 Mulching head with new teeth. Winch. Comes with spare 80” bucket. Half the price of new. - Item ID-12413 - Tom 800-315-9950 x6042005 Waratah 622 Proc. Head with Top Saw - Good condition and well maintained. Needs minor maintenance and new monitor, but priced to allow for that. Complete with computer and some spare parts - Item ID-12420 - Tom 800-315-9950 x6042006 Lamtrac LTR7230 with New FAE 175 mulching head - Only 522 demo hours, this machine still carries a warranty from the MFG. Equipped with Cummins C8.3 - 230HP. FAE Head is Brand New and has ZERO hours! It replaces the head in the photo. Weight is 26,000 lbs giving it a very light 4.42PSI ground pressure. Superior traction and stability through Lamtrac’s unique quad track/double

articulated platform. Priced well below dealer cost. This is a bargain from the manufacturer that won’t be seen again. See more at www.lamtrac.com. - Item ID-12353 - Tom 800-315-9950 x6042006 Log Lift 115Z Foldable Self Loader - Never mounted. This loader is the highest quality on the market. Includes Stainless Steel Cab that hydraulically raises 5 feet; Two Section knuckle boom with squirt extension for total of 32’...Longest Reach in it’s class. Lift capacity of 2000 lbs at full reach. Unique foldable ‘Z’ design allows loader to fold up and store totally behind the cab or between trailer and pup without resting boom in front of truck or on load. Out & Down outriggers give maximum stability. Log Lift Loader also weighs 20% less than other loaders in it’s class. Piston pumps give smooth fast cycle times. Cab is heated and has joystick

controls. A/C can be added. This is the best you can buy in a self loader. - Item ID-12356 - Tom 800-315-9950 x6042006 Talbert 25T Trailer - Model 25XPL Tri-Axle. 25 ton capacity with 25’ Floor with 6’ Dove. ABS. Tires at 70%. Very Good Condition. - Item ID-12416 - Tom 800-315-9950 x6042007 Kenworth W900B Log Truck w/Loader - Only 129,000 miles. Great condition. C-15 Cat engine with 18 speed transmission. New Tires. 24’ bed. Chalmers Axles, 20K Front; 46K Rear. Hubler Brothers Loader installation of Prentice 2124 includes headache rack oil cooler. 2011 Pitts Pup Trailer adds $10,000. - Item ID-12412 - Tom 800-315-9950 x6042007 Kodiak Kutters Model B425 - Great condition with just 2500 hours. FAE Mulching Head Model 500-U. Cat C-13 engine with 425HP. Tracks at 50%. Serviced and ready to work. Compare this


When You Buy Your Circular Saws From B.H. PayneYou’ve Bought the best... We Guarantee It!

Make Sure To Ask For Our Free, Complete Saw CatalogWe Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth

Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also

Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels,

Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627Quality Brand

Reg. U.S. Pat Off

Circular SawsSaw Bits and Shanks

Circular KnivesCarbide Tipped Saws

Carbide Strobe ® SawsB.H. Payne & Company

Saw Manufacturers

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627

Here’s What You Get With Every B.H. Payne Saw

B.H. Payne & Company, Inc.

404 761-8711Fax 404 761-5398

“Since 1890”

E-mail: [email protected] Web Site: www.paynesaws.com

1999 Timbco 820 ForwarderItem ID: 12454Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Blockbuster Firewood Proc. Item ID: 12437Contact: Michelle800.315.9950 Ext. 603

www.LBXonline.com

price....it’s below wholesale! - Item ID-12345 - Tom 800-315-9950 x6042007 Lamtrac Model LTR6125 Mulcher - NEW TRACK MULCHER W/ MAGNUM HEAD & WARN WINCH, 14 hours. The multipurpose LTR6125 offers the possibility to install an array of attachments to fit all your needs. Easily changing from a Mulcher to a Brush Cutter, Root Rake, or Dozer Blade, the LTR 6125 can get the job done quickly and efficiently without the hassle of having 4 machines to do one job... the LTR6125 does it all! Complete MFG Warranty included. - Item ID-12166 - Tom 800-315-9950 x6042007 Puma (K2) Forwarder - 2300 Hours. Excellent condition. Perfect for 2 to 4 load/day jobs. Small footprint. Low profile. Very strong loader with excellent reach. Ground clearance 23”. 23.1 x 26” tires at 80%. Cummins 130HP engine. Clark 3200 Power Shift transmission. Max speed 18MPH. Parker IQAN control system monitors all functions. Includes front blade. Comfort cab with AC/Heat and Stereo. Similar unit new is $230,000! - Item ID-12390 - Tom 800-315-9950 x6042008 Lamtrac Model 8290 Quad with FAE 300-U Head - Only 1200 Hours on this amazing land clearing machine. Super light foot print allows this machine

to go where no other can and climb where no other machine dares! Cummings 290 HP provides maximum power to the head for best performance in its’ class. Very low ground pressure of 3.97 PSI. Weighs 36,000 lbs. Operator comfort is second to none. Safe and easy to maintain. This unit is priced well below wholesale. See www.lamtrac.com for videos and specifications. - Item ID-12354 - Tom 800-315-9950 x6042008 NEW Lamtrac Model 8290Q Mulcher/Right of Way Clearing Machine - New 2008 w/15 demo hours and FULL FACTORY WARRANTY. Cummins QSC 8.3 Tier III - 290HP; Rexroth Hydraulics; Berco undercarriage; Weight - 36,000 lbs (with head); 3.7psi ground pressure ROPS/FOPS/OPS certified cab with premium comfort package. Its ingenious four track, double articulated design enhances maneuverability while maximizing traction. Goes ANYWHERE! Best in class! TX - Item ID-12146 - Tom 800-315-9950 x6042009 Dynamic 585 Whole Tree Chipper - NEW! - Never Sold! Just 13 demo hours. Full factory warranty and updates. Model CH 585. S/N 5052. Cummins 500 HP Engine. 28” x 22” Capacity. Triple Chain Feed Deck. Cone Drum design for maximum fuel savings and


Call toll-free: (800) 548-6914 www.logtolumber.com

Turn Fallen Timber into Lumber to Use on YourTurn Fallen Timber into Lumber to Use on Your

Call toll-free: Call toll-free: Call toll-free: (800) 548-6914 www.logtolumber.com

i

i

i

i

*Optional Power Head package must be ordered along with the Model 18HD Band Sawmill, at the same time.

Model 18HD Baker Portable Band Sawmill with Power Head option*

*Optional Power Head package must be ordered along with the Model 18HD Band Sawmill, at the same time.

best quality chips. Reversing engine fan. Best price on market! - Item ID-12400 - Tom 800-315-9950 x6042009 Dynamic/Vector 7000 Whole Tree Chipper - NEW - Less than 125 Demo Hours. Powerful 700 HP engine. Weight = 60,000 lbs. Can handle up to 27” logs. 6 pocket drum gives maximum efficiency and best quality chips. Chipping - make chips to your specifications for fuel or other uses. Grind - process organics with light contaminants. Screen - size material to meet a variety of markets. Replaceable screens to fit customer specifications. CAN-BUS (3) mode operating system monitors critical instructions and all processing choices. - Item ID-12403 - Tom 800-315-9950 x6042011 Pitts Pup Trailer - Excellent condition. Tires at 80% Stakes straight. Photos say it all. - Item ID-12415 - Tom 800-315-9950 x604

Eagerbeaver 20 Ton Trailer - 1987, Eagerbeaver 20 Ton Trailer, Tandem Axle, Dual Wheels, 8.25R15 Tires Good, Manual Fold Down Ramps, Very Good Condition! - Item ID-12179 - Chris 800-315-9950 x600Euclid Dump Truck Model R-13 - Euclid Dump Truck Model R-13, Hours 3960, Engine Detroit Diesel - Item ID-12373 - Daren 800-315-9950 x603Iron Mule 4500 - Complete Overhauled Engine, Barko 40 Loader w/By Pass Bucket, Tires Like New - Item ID-12365 - Michelle 800-315-9950 x603Mack Truck $48,500.00 - 1998, Model DM Mack Truck, 300 HP Mack Engine; 330,000 miles; 7 Speed Transmission, 46K Rear, 20K Front, Tri -Axle, 22.5 Tires, Like New Log Bed, Truck is in very good condition! Plumbed to take pup trailer. Very well maintained. - Item ID-12178 - Chris 800-315-9950 x600Peterbilt Truck - 2000,

Peterbilt Truck, Sleeper, Good running condition. - Item ID-12176 - Chris 800-315-9950 x600Rayco Stump Grinder Model RG1665AC - Rayco Stump Grinder Model RG1665AC, New teeth - Item ID-12374 - Daren 800-315-9950 x603Trim All “All in One” Trim Saw Attachment - Order through Lumberman’s Exchange at great prices. This attachment can replace the bucket on a skid steer, loader/backhoe, or farm loader and turn it into a trimming saw at a fraction of the cost of large trimming machines. Reach from 23’ to 75’ depending on model. 3 models to choose from. Optional rotating saw and swing out arm for maximum flexibility and greatest performance. Clear power lines, dead limbs, or widen right of ways with 24” saw blade with carbide tips. - Item ID-12105 - Tom 800-315-9950 x6041992 Ardco Swamp Trencher

- Model H-150. SN:1522. Only 2200 HRS. Very Good Condition. DETROIT 6V71 with 310HP; Eaton heavy duty Hydrostatic Hydraulic Pumps and Motors = Sunstrand Hydraulic Drive = Funk double pump, 2800 series. Three Point Hitch for implement attachment Ditcher is a Dondi model 55 or 75. Enclosed cab with good working AC. Tires = 66 x 68:00 x 25 - 6 ply Super Wide Flotation Tires at 98%. This machine only offered by Lumberman’s. Fantastic buy if you need to work in wet ground. Used to help drain swamps or work in other soft ground conditions. This machine almost walks on water! Service records and books available from owner. FOB: GA. - Item ID-12312 - Tom 800-315-9950 x6041997 Barko 160C Knuckleboom Loader on Trailer - Nice loader. Cummins 6 Cyl engine. 8400 hours. Pitts trailer. Standard


Multitek Firewood ProcessorsIncrease Your Productivity and Profitability

Made in the U.S.A.

2005 Prentice 384 w/Saw HookupsItem ID: 12396Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

2003 Morbark 7600Item ID: 11830Contact: Michelle800.315.9950 Ext. 603

www.LBXonline.com

lever controls. Rotobec 4642 continuous grapple. - Item ID-12229 - Tom 800-315-9950 x6041998 Barko 160D Loader - 1998 Barko 160D Loader, s/n 22409 6cyl Cummins engine, Lever controls, Continuous rotation grapple. Trailer and delimber are not included - Item ID-12207 - Daren 800-315-9950 x6032004 Barko 375A Loader

on Rough Terrain Carrier - Mounted on rough terrain carrier. 40’ boom , hydraulic tilt cab, engine covers are hyd raised & lowered. 7209 hours. Rotobec continuous grapple. Very nice machine. - Item ID-12380 - Tom 800-315-9950 x6042004 Barko 395 on SP Carrier - Very Clean Machine. 8800 hours. Mounted on Big John Self Propelled Carrier. JD 6.9 Powertech Engine. Rotobec 4547 Grapple. 35’ Reach with

heel bar. Comfort Cab with Heat/AC/Stereo. Nice yard machine. - Item ID-12278 - Tom 800-315-9950 x6042006 Barko 595 CRL Loader - 40’ Live Heel for high stacking. 8555 well maintained hours. JD 6068T engine. Rotobec 4048HD Grapple. Undercarriage at 60%. Hyd tilt cab. Work ready! Good condition. - Item ID-12405 - Tom 800-315-9950 x6042010 Barko 295ML Magnum with CSI 4400 Slasher - Very seldom does a loader like this come to the used machine market place. Less than 600 hours. Barko Magnum Series with CSI DM4400 Sawbuck. 32’ reach. Cummins 173HP engine. 4642 Rotobec Grapple. Mounted on a Pitts 39’ Trailer. Save thousands over new! - Item ID-12352 - Tom 800-315-9950 x604Barko Knuckleboom - 2006, Model 495 Trailer Mounted , 3800 Hours , FEC Log Pro Buck Saw Included . Like

new one owner machine! - Item ID-12153 - Chris 800-315-9950 x6002007 Case 1150K Dozer - 2565 Hours on very strong dozer. Case 130HP engine. Open ROPS cab. 24” pads; Rock Guards; Canopy Brush Guard; Hydraulic PTO; Runs strong and priced to sell. - Item ID-12348 - Tom 800-315-9950 x6041961 Caterpillar 944 Wheel Loader - 1961 Caterpillar 944 Wheel Loader, Tire, Brakes, Bucket all are in good shape, Machine is Ready to work Serial #43A1589 - Item ID-12156 - Daren 800-315-9950 x6031983 Caterpillar 988B Loader with very low hours - 1983 Caterpillar 988B Loader, Hours 5228, Caterpillar 3408T Engine, s/n# 50W06423 T246 988B, It has a Rayco Bucket that is 11’6” wide x 5’ tall (8 yard bucket). - Item ID-12375 - Daren 800-315-9950 x6031987 Cat 988 Loader with Forks - 27,000 hours. Fair


REAL TUFF BALER&BAGGERTM

Phone: (325) 641-8300 Fax: (325) 643-3243Manufactured by M & F Gauge & Specialty Co., Inc.

www.realtuffbaler.com

$14,907

BUILT TO LASTReal Tuff Baler Dimensions & Specifications

using a two spool valve

starter not included

ponents are used

Effective May 1, 2011

‘96 Hood 20000 Loaderw/Delimber & Circle Saw SlasherItem ID: 12433Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

2011 Morbark 5500 Flail Debarker/DelimberMake Clean Chips!

Item ID: 12423Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

2009 CBI 6400T Grinder - WOW!Item ID: 12422Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

Condition. Big capacity. - Item ID-12186 - Tom 800-315-9950 x6041997 CATERPILLAR D5H TSK II - 1997 CATERPILLAR D5H TSK II, 6330 hours, 6/Way Dozer, Canopy w/Sweeps, Winch, Esco Single Function Grapple :U/C 60% approx., Pads 22in SBG R/P/B 50% SEGS 50% BAL,50% Track Guards : Front/Rear/ Side Screens, Grapples w/Ext, shipping dimensions weight 43,000lbs HEIGHT 10ft 5in LENGTH 17ft 10in WIDTH 8ft 9in - Item ID-12012 - Daren 800-315-9950 x6031998 Cat D4 Grapple Dozer - D4HTSKII Cat w/ Esco Grapple. Serial#TSK1990... Unit has 3600 hrs. good undercarriage grapple and winch. LGP pads. Runs well. Goes where skidders can’t. - Item ID-12324 - Tom 800-315-9950 x6042000 Cat 550 Harvester w/Log Max 840 Head - Very nice harvester with 6500 hours on machine, but only 3500 on 1997 Log Max 840 Processing Head. Cat 3126 engine w/180HP. Tires and Chains at 75%. Unit comes with spare squirt boom and many spare parts for processing head. s/n available on request. - Item ID-12349 - Tom 800-315-9950 x6042000 CAT 962G Wheel Loader - 2000 CAT 962G Wheel Loader worked at a

concrete plant in its prior life. Less than 1000 hours on its rebuilt engine and transmission. The machine comes with a five (5) yardbucket and has had a complete overhaul of the air conditioning system that includes a new compressor, condensor, lines and coil. The work to the air conditioner was a four thousand dollar ($4000 USD) investment. The machine has approximately 11,000 frame hours. The glass on the can is cracked on the front three panes and can be easily replaced if so desired. Otherwise, this is one of the best running wheel loaders in the market right now at its current price. - Item ID-12407 - Daren 800-315-9950 x6032007 Cat 325D w 624 Waratah Processing Head - 7800 hours. Very clean machine. Head updated. Unit is working today. 34” Triple Grouser Pads. Great landing machine. - Item ID-12283 -


To find the nearest dealer call:

(888) 820-3962


Call Marvin Miller for a quote 231-924-5953 (fax) 231-924-6166 11606 Brickyard Rd. Holton, MI 49425

We also offer expert Sharpening Services, plus…

Gang Edger ScraggTrim Split Strob

…and just about any Custom Saws you

need to keep you cutting longer…

for less!

Welded to your lengths!

BANDSAW BLADESWe have the most popular sizes in stock & ready to

ship from major manufacturers, including…

2005 Waratah 622 Proc. Head w/Top SawIncludes computer.Item ID: 12420Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

‘97 Rotochopper 166 (New Engine) Complete RebuildItem ID: 12427Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

Firewood Processor w/Circle SawItem ID: 12435Contact: Michelle800.315.9950 Ext. 603

www.LBXonline.com

2001 Timberjack/Deere 840FBItem ID: 12410Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

Tom 800-315-9950 x604Caterpillar D4H Dozer 1903 Hours - 1993, Cat Model D4H XL, S/N 8J00374, 1903 Hours, PAT Blade, Laser Attachment, Winch, Cat 3304 Engine. Excellent Condition! - Item ID-12177 - Chris 800-315-9950 x600Caterpillar Dozer Model D4E with winch - Caterpillar Dozer Model D4E with winch, 3304 caterpillar engine, power shift, 50,000 lb winch - Item ID-12369 - Daren 800-315-9950 x603Caterpillar Excavator Model 235 - Caterpillar Excavator Model 235, 1239 hours, 3306 Caterpillar engine, hydraulic thumb - Item ID-12371 - Daren 800-315-9950 x6031999 CAT 330 with Bucket & Thumb - Estimated 4500 hours. 40% undercarriage. Final Drives and Drive Motors just replaced. 42” Bucket with Fixed Thumb and Stump Ripper. S/N 6BR03006. Some cosmetic

damage. Engine runs good. Cab clean with working AC and heat. - Item ID-12250 - Tom 800-315-9950 x6041991 Cat 518 grapple skidder - 1991 Cat 518 grapple skidder All belly pans and sheet metal were removed so the machine could be steam cleaned. All the cylinders have been packed. The radiator is rebuilt with new tanks. New starter has been installed. A couple of new guages were installed. New hinge pins and steering pins installed. All filters and fluids have been changed. Many hoses have been replaced. Winch has been rebuilt. Brakes work good. New exhaust muffler and pipe installed. Tires have about 35% tread. Seat is in good condition. New paint and decals. - Item ID-11832 - Michelle 800-315-9950 x603Cat 518 Grapple/winch Skidder - Late 80’s 4WD

Drive; Cat winch, maintained machine.; 30.5 x 32 Tires, 95% rubber. 130-hp, all pins are good. - Item ID-12202 - Daren 800-315-9950 x6031994 Caterpillar 518C Grapple Skidder - 1994 518C Caterpillar log skidder. Serial number 9HJ00425. This machine is clean and is ready to go to work. Over $12,000 worth of work has been done to this machine(All workorders can be e-mailed). All belly pans and sheet metal were removed for steam cleaning. We have rebuilt the hinge pins and the steering pins. We changed the front and rear seals in the transmission, and the pinion seals in both differentials. The radiator has been repaired. It has new fan belts and hoses. The steering valve, grapple

valve, and brake valves were rebuilt. All cylinders have been repacked. The Lufkin winch has been rebuilt with new clutch packs. Installed new door latches. Doors open and close good. All fluids and filters have been changed. The tires are 28L- 26 in size and the tread will average about 40 percent. Machine has been sanded and painted. The hour meter is showing 4163. The engine cranks up instantly and the transmission shifts good - Item ID-12302 - Daren 800-315-9950 x603Wanted: USED Cat 518C Series Skidders - We have customers looking for CAT Model 518C Skidders in running condition. Grapple


Highest Production

Lowest Maintenance

GUARANTEED!!!

Trailer: Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.

Saw: Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.

Engine: 50 to170 HP or PTO Drive with user’s tractor.

Hydraulics: Commercial Shearing

Splitter: 35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge. Capacity - 4” to 27” Log diameter 0” to 48” Block Length Lifetime warranty on the entire splitter chamber.

Infeed Conveyor: 16” - 30” long Hydraulic powered.

Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.

2040 ROGERS ROAD,PERTH ,ONTAR IO K7H 1P9CANADA

www.cord-master.comEmail : [email protected]

NEWGRAPPLESYSTEMNow Available!

Today!888-219-9663


2003 Morbark 1300 WCL Tub GrinderItem ID: 12401Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

Rotochopper MC-166 XLTItem ID: 12362Contact: Michelle800.315.9950 Ext. 603www.LBXonline.com

or Cable. Contact Tom. Will need serial numbers and photos. - Item ID-12432 - Tom 800-315-9950 x6041998 CAT 525 Grapple Skidder - 9600 hours on well maintained machine. 34 x 25” Tires at 50%. Single Arch Esco Grapple and Winch all work well. Center section tight. Cat engine runs well. - Item ID-12429 - Tom 800-315-9950 x6042003 Cat 525B S/A Skidder - Good condition. 10,500 hours. New Transmission. Recent work done. Runs well. CA - Item ID-12189 - Tom 800-315-9950 x6042004 CAT 525B Grapple Skidder PRICED TO SELL FAST!!!! - 2004 CAT 525B Grapple Skidder, 8,538 hours, Caterpillar 3126 Engine, Powershift transmission, 30.5L-32 Tires (3 Poor, 1 Like New), More photos available, Machine is in southeast - Item ID-12424 - Daren 800-315-9950 x6031999 CBI Model 4800 Grinder - 1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition - Item ID-12047 - Tom 800-315-9950 x6042009 CBI Model 6400T

Grinder - CBI Grinder Model Magnum Force 6400T. Weight: 80,750 lbs. Cat C27 engine w/1050 HP. 1850 hours; 1 1/2” x 2” screen. 95% U/C. Customer has the feeder belt. Very good condition! - Item ID-12422 - Tom 800-315-9950 x6041976 Clark 664 Cable Skidder - Approximately 7500 hours. S/N 514F-2341-CAC. Strong Clark Winch; Tire chains; Pulls good. - Item ID-12249 - Tom 800-315-9950 x6041978 Clark 666 Grapple Skidder - Strong skidder. Esco 26 grapple with winch. 28L x 26 tires at 60%. Open ROPS cab. Stick Steering. Detroit 4-53 engine. Runs good. - Item ID-12325 - Tom 800-315-9950 x6041987 Clark F67 Skidders: 2 Running; 2 for Parts! - Customer selling 2 running Clark F67 Grapple Skidders and including 2 more F67’s for parts. Running units have Cummins Engines, one has 28L x 26 tires at 65%; Other running unit has 30.5 x 32 tires at 20%. Owner ready to sell! Great package deal! - Item ID-12326 - Tom 800-315-9950 x6041989 Clark 666 Dual arch grapple skidder - 1989 Clark 666 Dual arch grapple skidder, The machine has a new cummins 5.9l engine with less than 300 hrs on it. A new grapple with around 50hrs, 2 new interstate batteries and a new starter on it. It fires right up even in the winter. This machine

is ready to work!!! - Item ID-12219 - Daren 800-315-9950 x6031997 CLARK 666 Dixie Special - 1997 CLARK 666 Dixie Special, Grapple, winch, heat and air, Cummins 6BTA 6cyl engine, 177HP, 80” Grapple, Grapple fully open is 10’ from the outside edges. This machine is in excellent condition and is a must see, it has approx. 5000 hours, center pins are in great shape, Tires are very good rears are 98% and

fronts are 85%, Don’t let this machine pass you by!!! - Item ID-12137 - Daren 800-315-9950 x603Clark 664D Cable Skidder - Clark 664D Cable Skidder, 5 cylinder 88hp deutz engine, newly rebuilt transmission, new head gaskets, new injectors, new mainline. - Item ID-12221 - Daren 800-315-9950 x603WANTED: Used Clark F Series Skidders - If you have an older Clark F Series Cable or Grapple Skidder


1994 TIMBCO 425 Feller Buncher w/Bar Saw HeadItem ID: 12417Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

2008 JD 548 GIII Grapple SkidderLow hrs.; Great shape!Item ID: 12398Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

2000 Morbark 22RXL ChipHarvesterItem ID: 12397Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

that you would like to sell, please call to discuss. We have customers looking. Year models are from around 1986 to 19995. - Item ID-12151 - Tom 800-315-9950 x6042004 72” CSI R72 Circle Saw - Year model 2004, hydraulic. 20’ deck. Sold without the blade. New

blade is additional $3500.00. Was over $40,000.00 new, 2 years ago. machine needs a new blade, 1500 hrs, it was used to cut logs Price : 17,000.00 USD - Item ID-12125 - Michelle 800-315-9950 x6031996 JD770BH Motor Grader - 7720 Hours; s/n DW770BH557633. 12’ Blade; JD 6076 Engine. Very well maintained. Runs strong. Excellent price. - Item ID-

12313 - Tom 800-315-9950 x6042001 Timberjack/Deere 840 FB - Total hours = 8700. 75 hours on Rebuilt Engine. Machine is tight and dry. New Oil Cooler. Joy Stick Steering. 34” Tires at 70%. JD 22” Saw Head is tight and runs well. Very clean unit and a great price. - Item ID-12410 - Tom 800-315-9950 x604

2007 JD 437C Loader with ‘Stripper’ Delimber - Seldom used by owner. Only 1650 hours and in perfect condition. Includes CSI 4400 Bar Slasher. Retired owner does not provide photos. Looks and works like new. Buyer will not be disappointed to go and inspect. Heat and Air and full stereo in cab. Mounted on trailer. Photo is a replica of what you will buy. $90,000 below new price! - Item ID-12430 - Tom 800-315-9950 x6042009 JD 240DLC w/Denarco DM4150 Stroker - Only 2200 hours. Owner selling out. This unit in MINT CONDITION! Price is what is owed on machine. Buyer may consider taking over payments. One owner of course. Maintained to highest level. This is a great value and will not be on the market long. Not advertised anyplace but LBX! Note: No Butt Plate, or Measuring System-but can be added

NE

800.553.0182WoodmizerIndustrial.com

© Copyright 2012, Wood-Mizer Products, Inc.

Visit us on Facebook

Machines That Make You MoneyMaking it in this competitive, ever-changing industry requires having an edge. Wood-Mizer’s industrial line makes your business flexible and productive, giving you the edge to move your business forward.

Go online or call today for more information.

NE






NE







Ideal to Grind:

Simplicity MasteredEase of Operation with Less Downtime

Change Particle Size While You Grind

800-277-8068

Difficult & Dirty Materials


FAX TO: 800-248-4479 419-244-8887 419-248-4479

[email protected]

‘06 JD 540GIII Cable SkidderGreat Condition; Low

Item ID: 12411Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

2005 Volvo L90E Wheel Loaderw/Forks & Bucket; Spare Bkt. Very Clean!Item ID: 12404Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Iron Mule 4500Item ID: 12365Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

by buyer after sale. - Item ID-12308 - Tom 800-315-9950 x604Deere 335 - 2006, Model 335, 5500 Hours, CTR 426 Delimber, Very good condition, one owner machine. - Item ID-12175 - Chris 800-315-9950 x6002007 John Deere 335C Loader - 2007 John Deere 335C Loader, 2000 hrs, comes with a NEW CTR Reversable Bucksaw. - Item ID-12234 - Daren 800-315-9950 x6031979 JD 440C Cable Skidder - Rebuilt Deere 4 cyl. engine; Manual Transmission, Body- good, open cab w/ ROPS, dozer blade, diff locks, winch with cable; Tires - 16.9 x 30 4@30%; Hour meter shows 3400. Color - Yellow. VIN #: 440C334150T - Item ID-12091 - Tom 800-315-9950 x6041977 (est) JD 540A Cable Skidder - Nice little unit that still runs well. 28L tires at 35%. JD engine. Hour meter not working. - Item ID-12199 - Tom 800-315-9950 x6041984 John Deere 540B Skidder - 1984 540B Skidder 95% Rubber Transmission Rebuilt Winch Rebuilt Front Rear end Rebuilt Rebuilt Radiator - Item ID-12343 - Tom 800-315-9950 x6042006 JD 540GIII Cable Skidder - Only 1800 hours. Bought with 575 hours in

2009 and used sparingly in hardwood application. 23.1 Tirees at 80%. AM/FM Radio with Heater in cab. Removable glass for summer. Great condition. - Item ID-12411 - Tom 800-315-9950 x6041991 John Deere 548D Grapple Skidder - 1991 John Deere 548D Grapple Skidder with winch, machine is tight and ready to work - Item ID-12208 - Daren 800-315-9950 x6031996 John Deere 548G Grapple Skidder - 1996 John Deere 548G Grapple Skidder, approx. 8800 hours, Heat/Air, winch with approx 80’ of 3/4” cable, 28Lx26 (fronts 30%, Rears 70%) Pins are fair/good condition, absolutely no blow by!! Machine is dry and ready to go to the woods. - Item ID-12439 - Daren 800-315-9950 x6032008 JD 548 GIII Grapple

Skidder - Very Nice Machine with only 2300 hours. Single arch grapple; Winch; 28L tires at 75%; Comfort cab with heat and air. - Item ID-12398 - Tom 800-315-9950 x6041984 John Deere 640D Cable Skidder - NEW TRANSMISSION; John Deere 6cyl Diesel Engine; 30.5 x 32 tires at 70%. Great flotation. Winch works well; Runs good. VIN #: 640DC513656 NC - Item ID-12092 - Tom 800-315-9950 x6041992 John Deere 643 feller buncher - Complete rebuild & paint less than 1000 hrs ago. New 28 L tires under 300 hrs. Brand new ice chains are included. All pins are tight, cylinders are dry. Strong hydraulics & hydrostats. Strong 6.8 L turbo diesel, 175 hp, no

smoke or blow by. Many new parts & hoses. Has some minor hydraulic leaks & minor slop in the accumulator arm. Great brakes. E -brake needs adjusting, back up alarm doesnt work. No heat or a/c. Has a 20” shear head. - Item ID-12285 - Chris 800-315-9950 x6002002 John Deere 648GIII Dual Function Grapple Skidder - 2002 John Deere 648GIII Dual Function Grapple Skidder, 9700 total hours, 3000 on Reman. engine, Reman. transmission 6000 hrs. 30.5x32 tires at 60%. MAchine is working daily. - Item ID-12231 - Daren 800-315-9950 x603


Rayco Stump Grinder RG1665ACItem ID: 12374Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

2010 Barko 295ML Loaderw/CSI Slasher; 800 hours! Full warranty!Item ID: 12352Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

1981 Dresser 510BItem ID: 12359Contact: Michelle800.315.9950 Ext. 603

www.LBXonline.com

Haybuster IG-10 Tub GrinderItem ID: 12361Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

2010 JD 748H Grapple Skidder - Like New Condition. 2100 hours. 30.5 x 32 Tires at 80%. Loaded. Customer lost contract. Save big over new machine purchase. - Item ID-12282 - Tom 800-315-9950 x6042011 JD Model 748H Dual Arch Skidder - 30.5 x 32 Tires. 600 Hours. Job shut down after buying skidder new in Jan. Save 10% off new and pay no sales tax! - Item ID-12262 - Tom 800-315-9950 x6042006 JD 748GIII Dual Arch Skidder - Approx 8400 hours; Very well maintained; 30.5 tires at 40%; Sweda axles; Winch. Unit working

everyday. - Item ID-12117 - Tom 800-315-9950 x6041981 Dresser 510B - Dresser 510B Pay Loader, meter shows 8571 hours. Had a new Komatsu engine installed 3000 hours ago. Starts and runs great, tires are 85%. Comes with forks, owner also has bucket. - Item ID-12359 - Michelle 800-315-9950 x6032002 Franklin 185 Cable Skidder - Very clean machine with about 7800 hours. Cummins Power. One owner. Well maintained. Tires at 80%. - Item ID-12451 - Tom 800-315-9950 x6042003 Franklin 185 Cable Skidder - 7600 Hours; Very good condition; Cummins Power; Enclosed Cab with working heat and air; Tires at 80%. S/N18562 - Item ID-

12447 - Tom 800-315-9950 x6042003 Franklin Q70 Grapple Skidder - 2003,Model Q70-M31A,Enclosed Cab W/Heat & A/C,28Lx26 Tires 85% Rear,70% Front , 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Winch and Grapple. Excellent one owner machine! - Item ID-12337 - Tom 800-315-9950 x604Franklin Skidder - 2003,Model Q70-M31A,Enclosed Cab W/Heat & A/C,28Lx26 Tires 85% Rear,70% Front , 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Excellent one owner machine! - Item ID-

12152 - Chris 800-315-9950 x600Franklin Skidder Model 142 - Franklin Skidder Model 142, Hours 7230, Good strong machine, 453 Detroit Power unit - Item ID-12376 - Daren 800-315-9950 x603Franklin Skidder Model 170PT - Franklin Skidder Model 170PT, New tires, New cable ,Hours 6585 - Item ID-12377 - Daren 800-315-9950 x6032003 Franklin Q80 Grapple Skidder - 7500 hours, but just 5000 hours on reman engine. New Radiator; New Hydraulic Pump; Comfort cab with good working heat and air; Tires at 80%. - Item ID-12450 - Tom 800-315-9950 x6042006 GT25 Gyro Trac - Refurbished undercarriage at 80% with new tracks and new set of cutter teeth, this machine is work-ready. 773 hours on Cummins 230HP diesel, overall good condition. Pressurized cab, winch, ROPS. - Item ID-12268 - Tom 800-315-9950 x604Haybuster IG-10 Tub Grinder - This 8-ft. tub is powered by a 275 hp CAT engine. This portable tub grinder has 48 swinging hammers and a set of 1” screens. Unit also has new clutch and belts, and the hammers are in good shape. It was being used to grind green waste but can


SKIDDER TIRES

TRUCK TIRES

(800) 537-2042

ASK ABOUT FREE DELIVERY

WHO P10-43SHD Tub GrinderItem ID: 12360Contact: Michelle800.315.9950 Ext. 603

www.LBXonline.com

2006 Timbco/Valmet 445EXL w/2800 Saw HeadOnly 1200 hours! Mint condition!Item ID: 12392Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

2010 Valmet 860.4 Forwarder$70,000 below new!! 700 hours.

Item ID: 12351Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

also be used for processing many types of wood waste. With a pintle hitch for mobility, this machine is ready to be pulled to your site today and put to work. - Item ID-12361 - Michelle 800-315-9950 x6031996 Hood 20000 Loader w/Delimber & Circle Saw Slasher - Hour meter shows 1650 hours on rebuilt engine. Slasher and delimber run good. 30’ boom. Overall good condition. - Item ID-12433 - Tom 800-315-9950 x6042004 Hood 28000 Loader with hotsaw - Year model 2004; 72” hot saw; has 8000 hours. - Item ID-11418 - Michelle 800-315-9950 x603

1994 Husky 235XL Loader Package - Hour meter broken. OT Delimber Trailer; CTR 314 Cradle Delimber; Bar Slasher; Heat and AC work; Strong Loader; JD 160HP Engine. - Item ID-12445 - Tom 800-315-9950 x6042004 Hydro-Ax 570 Feller Buncher - 9405 Hours. S/N HA18599. Cummins 205HP Engine. Hydrostatic drive. Hydro-Ax bunching saw head with side cut feature. New 30.5 x 32 tires. New engine 2500 hours ago. New Gear Box 2500 hours ago. New saw disc. Runs well. Ready to go. - Item ID-12316 - Tom 800-315-9950 x6041996 511EX Hydro-Ax With Bunching Saw Head - Hours est at 6800. Only 200 hours on factory reconditioned hydraulic motors and pumps. Comfort cab with working air. 28L tires with chains at 50%. Saw head has side pocket for cutting larger trees. Very well maintained machine. - Item ID-12072 - Tom 800-315-9950 x6041999 Hydro-Ax 611 EX - 1999 Hydro-Ax 611 EX, Cummins (Recon) DR1477RX SN: 60301916 HP: 215 CYLINDERS: 6 HOURS on new engine: 7613 total hours, AIR CONDITIONING, PAINT: Fair, BODY: Good

GLASS: Fair, tire size 67 x 34.00-26 CONDITION: All good, Hydro-Ac side cut head. - Item ID-12195 - Daren 800-315-9950 x6031999 Hyundai 280 w/Denharco 3500 Stroker - Good running unit. Priced to sell. Approx 9800 hours. Could use some updates, but great value. - Item ID-12455 - Tom 800-315-9950 x6041987 Morbark 27 WCL NEEDS MOTOR - 1987 Morbark 27 WCL, Serial # 1796, Morbark 1000 Knuckle boom loader, 3 knife disc, Newer discharge chute, New banding around disc, Brakes and tires are also OK, Everything works well Newer clutch -- with outboard bearing, Had Cummins KTTA 750 HP engine -- needs repower - Item ID-12443 - Daren 800-315-9950 x6031993 Morbark Model 20 Tracked Chipper - Just over 8000 hours. Very solid and compact machine in good condition and ready to work.

Compact for the size. Has loader so unit is totally self contained. Tracks at 60%. Great value for a tracked chipper. - Item ID-12339 - Tom 800-315-9950 x6042008 Morbark 3800 Wood Hog - Super Clean machine! Only 3064 hours. Very well maintained. S/N 189-1033. JD 600 HP Tier 3 Engine. Remote control. Mag End Pulley. Hydraulic Fan. Break away mounts. PT Tec Wet Clutch. 3” Hex Screens. - Item ID-12277 - Tom 800-315-9950 x6042011 Morbark 5500 Flail Debarker/Delimber - Cat C15 engine w/600HP. Only 912 hours. 3 Flail design. Gross weight 68,060 lbs. Like new! Excellent condtion - Item ID-12423 - Tom 800-315-9950 x6042000 Morbark 22RXL Chiphavester - 2000 Morbark 22 Chiphavester, The infeed area has been beefed up with T-1 steel for more strength and longer life


HEAVY DUTY FORKSAT BIG SAVINGS

BAY EQUIPMENT CO. / (616) 392-1811

Above forks have capacities from 12,000 lbs. to 30,000 lbs. per pair.

Also, 4”, 5”, 6” thick forks to 168” long.

2008 Morbark 3800 Wood HogClean & Ready to Work!Item ID: 12277Contact: Tom 800.315.9950 Ext. 604www.LBXonline.com

‘02 Franklin 185 Cable SkidderItem ID: 12451Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

PRICED TO SELL FAST!Single man operation w/circle sawItem ID: 12370Contact: DarenPh: 800-315-9950 x603

www.LBXonline.com

with less weight. Enclosed weatherized operator’s cab tilts hydraulically for transport . Overall Length 38” Transport height 13’ 6” Width 10” 6” Weight 70000 lbs. Chipping capacity 22” diameter 750 hp 3412 CAT engine, M1000 loader - Item ID-12397 - Daren 800-315-9950 x6032007 Morbark 22 RXL Chipper - 8000 hrs. Just

replaced feed tray, end spout, belly liners, hood liners, and one pump. Machine overall is in very good condition. S/N 2043. Includes loader with heat and AC. - Item ID-12449 - Tom 800-315-9950 x6042003 MORBARK 1300 WCL TUB GRINDER - 2003 MORBARK 1300 WCL TUB GRINDER, 1280 Hours, Morlift 400 loader with

rotobec grapple, Cat 3412 engine, 860Hp, Twin Disc trans w dry clutch and driveline breakaway coupler. Air compressor. Cab is extra clean. Includes all manuals in cab - Item ID-12401 - Daren 800-315-9950 x6031996 Morbark 2400 Chipper - 1996 Morbark 2400 Chipper, Twin Disc Clutch,New Paint and Decals,Panels in Great shape,Pintle Hitch,New Knives,12X16.5 Tires Price :

18,900.00 USD - Item ID-11879 - Daren 800-315-9950 x6031992 Peerless Drop Center Chip Trailer - One (1) Peerless Drop Center - Open Top - Chip Trailer 1992 Model - Serial#: 1PLE04426NPC80940 Model 44 - DC X 96” - Top Henge Rear Gate - Spring Suspension - Reyco. 11R24.5 Tires - Steel Disc Wheels - Good Floor 50 - 70% Tires - Except 2 that are 40% 50% Brakes. - Item ID-12341 - Tom 800-315-9950 x6042006 Peerless Open Top Chip Trailer - One (1) Peerless Straight Floor - Open Top - Chip Trailer 2006 Year Model - Serial#: 1PLE045206 PJ54716 Model 45 CST - Top Henge Rear Gate 11R 24.5 Tires - Steel Disc Wheels - Good Floor Spring Suspension - Reyco 50% Tires - New Brakes - Item ID-12342 - Tom 800-315-9950 x6041997 IH 4000 Truck with Prentice Loader - 6 Cyl. Diesel engine; 26000 GVW. Used as yard machine. Loader runs and lift good. - Item ID-12261 - Tom 800-315-9950 x6042008 Prentice 2764 w/Rotary Axe Brush Cutter - Super clean machine with only 1480 hours. Excellent condition. Great right of way maintenance machine. Comes with optional Prentice Hot Saw for tree felling. Customer must sell. - Item ID-12239 - Tom 800-315-9950 x6042010 Prentice 2670 w/Bunching Head - ONLY 1504 Hours. Excellent Condition. 34” Tires at 80%. One Owner. You will not find units like this on the market very often! - Item ID-12452 - Tom 800-315-9950 x604Prentice 210D - 1995, Model 210D Mounted On A Prentice Articulated Self Propelled Carrier, S/N 210P52736, Prentice C742 Grapple, Lever Controls, 6059 Deere Engine. Working daily,good dependable machine. - Item


Sell Your WOOD – $300/cord or More!Double or triple your profits by shrink wrapping wastewood - fore-wood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for produc-ing square bundles-palletizable for ease in storage and transporting. Inquire for free details. Video and Package samples at nominal fee.

B & B Manufacturing

Haybuster IG-10 Tub GrinderItem ID: 12361Contact: Michelle800.315.9950 Ext. 603

www.LBXonline.com

1984 John Deere 540B SkidderLow price, has grapple!Item ID: 12343Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

ID-12174 - Chris 800-315-9950 x600Prentice 490 - 2006, Model 490, Dual Arch Grapple Skidder, 8000 Hours, 30.5x32 Tires Approx. 50%, Less than 500 hours on dealer rebuilt engine. One owner machine. - Item ID-12172 - Chris 800-315-9950 x6001993 Prentice 210 Loader on Trailer - Very clean unit. Works well. Cummins engine. 9355 hours. Bar Saw hydraulics. Heat and AC. Some cosmetic dents. Great value. - Item ID-12289 - Tom 800-315-9950 x6042005 Prentice 280 Log Loader - 2005 Prentice 280 Log Loader, 4200 hours, 6cyl Cummins engine, heat/air, radio, the machine is plummed for slasher and buck saw. Woods ready!!! - Item ID-12458 - Daren 800-

315-9950 x6032004 Prentice 384 TMS Loader Package - 11,145 Hours; CTR 450 Delimber; Recon John Deere engine with less than 200 hours. Runs good. Working on job today. Good condition. TN - Item ID-12171 - Tom 800-315-9950 x6042005 Prentice 384 with Saw Hookups - 2002 Prentice 384 with Saw Hookups, 10123 Hours, 2nd owner, This machine is in very good condition and is ready to work!!! - Item ID-12396 - Daren 800-315-9950 x6031999 Prentice 620 Harvester - Ponsse processing head; New undercarriage; Engine replaced 1000 hours ago. Very strong machine. Good value. Quebec, Canada - Item ID-12134 - Tom 800-315-9950 x6041997 Rotochopper 166 (New Engine) - Cat 3406 engine with 68 hours rebuilt 2 months ago by Caterpillar Main frame hour meter

3898, New powerfeed and bearings about a year ago, New main bearing on rotor about 8 months ago, Turbo 2 years old, Spare tire/rim. This Machine is priced to sell quick!!!! - Item ID-12427 - Daren 800-315-9950 x6031998 Rotochopper 166 with Coloring system - 1998 Rotochopper 166 with Coloring system, less than 1000 hours on rebuilt Cat 3406 engine, 460hp, 2 sets of screens 2” and 4”, 2 types of hitches pintle and 5th wheel. This machine is priced well under its market value. - Item ID-12428 - Daren 800-315-9950 x6032003 ROTOCHOPPER CP118 - 2003 Rotochopper CP118 Portable wood chip processor with coloring unit. This machine runs good but has an electric problem it keeps flipping the circuit breaker for the conveyor and auger Sold at this price As Is needing work to electric has extra screens,

2” screen. Will produce 35 - 40 yards per hour Price : 40,000.00 USD - Item ID-11973 - Daren 800-315-9950 x603Rotochopper MC-166 XLT - This horizontal grinder is powered by a 460 hp CAT 3406 Diesel engine. CAT engine was replaced while under warranty in 2003. Built-in colorizer adds to the productivity as raw materials are colored at the same time they are ground. In-feed hopper is 16’ long by 66” wide. Rotor is 66” wide by 26” diameter. Unit has a variety of screens & screen sizes. The frame has approximately 3050 hours and the engine has approximately 2000 hours. Although this unit has only been used to grind pallets, it is also excellent for dry wall, bark, brush, green waste, trees, plastics, and garbage. - Item ID-12362 - Michelle 800-315-9950 x6031998 Tigercat 240 Tracked Loader - 9550 Hours. 32’


PIPER’SSaw Shop

Promotional Pricing OfferSimonds Red Streak Hard Back

$14.27 eachTell us you saw it here!

Limited

Time

Only$14.71 each

1999 Mack Truck w/Prentice 120ItemID: 12448Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

2004 CAT 525B Grapple Skidder Item ID: 12424Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

Reach. Rotobec continuous grapple. Strong Machine. Works well. New Cummins 6BT engine in last 500 hours. Cab riser for high stacking. Clean cab with AC. - Item ID-12242 - Tom 800-315-9950 x6042007 Tigercat 234 Loader w/Slasher - Very clean unit with just 4600 hours. Powerful with Cummins 173HP engine. 32’ Reach. Tigercat continuous rotation grapple. CSI DL4400R reversible sawbuck. Mounted on Pitts trailer. Comfort cab with AC/Heat/Stereo and Satellite

Ready. Less than half the price of new and in excellent condition. - Item ID-12347 - Tom 800-315-9950 x6042007 Tigercat 250 w/2011 Log Max 7000XT - 7500 hours on Tigercat. 700 hours on new 2011 Log Max 7000XT head. New pump for head. 36” Triple Grouser pads on 60% undercarriage. Cummins 6 cyl engine. Smooth and powerful machine. Log Max head can do multi-stem delimbing (see photos). Owner closing down job. Below market price. - Item ID-12366 - Tom

800-315-9950 x6042007 Tigercat 630C Skidder - Very clean unit. S/N on request. Tires at 60%. 6519 hours. Big capacity grapple. Tight and ready to work. One owner machine. - Item ID-12275 - Tom 800-315-9950 x6041994 Timbco 425 Feller Buncher with Bar Saw Head - 9,142 Hours; 28in. Saw head; B Cummins Engine; Accumulator; Tracks need rails and sprockets; No leaks; Runs well; Ready to go and work. - Item ID-12417 - Tom 800-315-9950 x604

1995 Timbco 445 with Quadco hotsaw - 1995 Timbco 445, approx. 9000 hours, New track Drive Motor, Cylinders just packed, Cummins engine, u/c 60%, this machine is in the woods daily - Item ID-12388 - Daren 800-315-9950 x6031995 Timbco T445 with Quadco 22” head - 1995 Timbco T445 with Quadco 22” head, 4600 hours on Total rebuild, New table and pins, new engine, new wiring harness, new track adjusters with zero hours on them, all new left rollers, 4 out of 7 rollers have been replaced on the right side, U/C is 65%, Tracks are in good shape 70% approx., new hour meter was installed with new engine. - Item ID-12346 - Daren 800-315-9950 x6031999 Timbco 820 Forwarder


SAWMILL EXCHANGENorth America's Largest Source

of Used Portable Sawmills.

Over 800 Ads:

and Much More!!

The Place to Sell Your Equipment

800-459-2148

2007 Valmet/Komatsu 911 Extreme Harvester


www.LBXonline.com

2000 Peterbuilt Logging TruckItem ID: 12159Contact: Michelle800.315.9950 Ext. 603www.LBXonline.com

‘97 Volvo A25C Articulated Dump TruckItem ID: 12444Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

- Good running condition. Tires at 80%. 5000 hours. Bunks included. - Item ID-12454 - Tom 800-315-9950 x6042001 Timbco 445D with Quadco Sawhead - 12,560 hours. Runs good. Undercarriage 50%. 540 degree non continuous rotation on upper. Quadco 22” saw with continuous rotation. About 3000 hours on rebuilt engine. Areas to repair: some cracked track pads, 2 or 3 cracks in lower carbody that were welded, and may need new seal on one of the pumps. Great value. - Item ID-12288 - Tom 800-315-9950 x6042003 TimberPro Model TS 620 Six-Wheeled Grapple Skidder - 4990 hours, Cummins motor, 6WD. Has 400 hours on rebuilt engine, New ECM; New drive pump; New tires. Excellent condition; Great Value. Perfect for long hauls or handling big loads. Rear bogey tracks included. - Item ID-12254 - Tom 800-315-9950 x6042007 Timbco/Valmet 445EXL w/2800 Saw Head - Very limited use machine. Only 1240 confirmed hours. Quadco 2800 Intermittent Saw w/360 rotation and 12 tooth design. Upper unit has 360 rotation. Undercarriage at 75%. 24” single grousers. - Item ID-12392 - Tom 800-315-9950 x604

2008 Timbco/Valmet 445FXL with Quadco 22” Saw Head - Latest Model of Tracked Feller Buncher from Valmet with Heavier Komatsu undercarriage. 5300 hours. Excellent condition. 28” double grousers. Leveling cab. 360 degree rotator on Quadco saw head gives great flexibility in production. Customer selling due to job changes. Great value! - Item ID-12119 - Tom 800-315-9950 x604Timbco Fellerbuncher - 2000, Model 425D , 8.3 Cummins Engine , approx. 7400 hours,U.C. New Drive Motors just installed. Like New , Timbco Bar Saw W/40 Degree Rotate with less than 1000 hours on it, Leveling System And Swing System Tight. Very Good Machine , Can Be Seen Working! - Item ID-12155 - Chris 800-315-9950

x6001985 Timberjack 230 Cable Skidder - Still a strong working machine. Detroit 3-53 recently rebuilt. 28L tires at 30 - 40%, PLUS 2 spare axles, 3 spare tires & riims, and a spare transfer case! Winch pulls strong. Excellent value! - Item ID-12272 - Tom 800-315-9950 x6041999 Timberjack 735 Shovel Logger - Ugly but very good machine. Bank Repo. Has sat idle due to court settlement and now can be sold free and clear. 75% undercarriage. Runs well. Low hours. GREAT PRICE! - Item ID-12311 - Tom 800-315-9950 x6041992 Timberjack 240 Cable Skidder - New drop in 4 Cyl. Cummins engine. New transmission. 23.1 x 26 Tires 80%. Chains 75% good. Gearmatic winch. Just spent $4000 on brakes. Excellent value. FOB: NH - Item ID-

12274 - Tom 800-315-9950 x6041995 Timberjack 380C Cable Skidder - Very clean unit. Working today in hardwood. Less than 3000 on rebuilt Cummins 6BT engine. Tires at 70%. Winch works great. - Item ID-12273 - Tom 800-315-9950 x6042004 JD/Timberjack 608S w/Waratah 622 processing head - 6809 Hours. One owner. Rebuilt undercarriage, now at 50%. Waratah 622 can have top saw added. Good condition. Forestry Package. Serial numbers available for both machine and head. LA - Item ID-12161 - Tom 800-315-9950 x6042002 Timberjack 608s with hot saw - 2002 Timberjack 608s with hot saw, approx. 6000 hours, Machine is in very good shape and has been well maintained. - Item ID-12194 - Daren 800-315-9950 x603


VFD CONTROL

ALL SIZES OF MOTORS

MANUAL TRANSFER

SWITCH

MOTOR CONTROL STARTERS(Solid State)

DISCONNECTSWITCH

AUTOMATICREDUCED VOLTAGE

STARTER

COMBINATIONSTARTER

Reconditioned Electrical Equipment

Saves You Money, Big Money!

We Buy, Sell, or Rent— Used, Obsolete and Hard to Find Industrial Electrical Equipment

Many ItemsIn Stock Ready for

Immediate Shipment!

When you need it NOW—And at the BEST Price!

YOU NEED WEAVER ELECTRIC

CALL TODAY!Toll Free 800-257-0038

2003 Franklin Q80 Grapple SkidderItem ID: 12450Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

1994 Husky 235XL Loader PackageItem ID: 12445Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

Helle Sawmill and ChipperItem ID: 11992Contact: Michelle 800.315.9950 Ext. 603

www.LBXonline.com

2004 Hood 28000 Loader w/Hotsaw Item ID: 11418Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

1998 Valmet 911.1 Harvester - Single Owner machine. Super Clean and ready to go to work. 10,200 hours. All regular maintenance done consistently. Tires at 75%. Sisu Engine uses less than 4 gal/hr. Slide Boom design easy to learn and operate. - Item ID-12338 - Tom 800-315-9950 x6042005 Valmet 860.1 8-Wheeled Forwarder - 11,800 hours. New hydraulic transmission and gear box. Spare pump ($7,000 value) Good running condition. Sisu engine uses 4 gal/hour. 16 ton capacity. Tracks for front and back. Front blade. Hood guard. - Item ID-12267 - Tom 800-315-9950 x6042005 Valmet 941 Harvester with TWO 370.2 Heads - The largest of rubber tired harvesters. 15,000 hours, very well maintained and working today. Good condition. INCLUDES TWO Valmet 370.2 harvesting

heads. Long reach, leveling cab, and tracks for front bogeys make this a great value. Customer including Low Boy Trailer for legal transport. - Item ID-12265 - Tom 800-315-9950 x6042005 Valmet/Timbco 415 Harvester with 370E Head - Very nice unit. 7400 hours. 370E Harvesting head just added 22 months ago and only has 2000 hours. 36” Triple Grouser tracks at 60%. Sisu engine that is very stingy on fuel. 8’ squirt at end of boom for 30’ reach. Reversible fan and auxiliary oil cooler. - Item ID-12266 - Tom 800-315-9950 x6042007 Valmet/Komatsu Model 911 Extreme Harvester - Unbelievable deal on 3000 hour machine. Currently has mulching head for working severe hills but can be changed to harvesting head with little effort. 4 tracks in place of tires allow this machine to literally go

where no other machine can go. Engine and hydraulics specially designed to work maximum slopes. Self leveling cab keeps operator in perfect position for best productivity. You Tube video available for watching this machine work. - Item ID-12446 - Tom 800-315-9950 x6042008 Valmet 890.3 20 Ton Forwarder - 7200 Hours. Good Condition. 8-wheeled with Eco Tracks for all bogeys. Best Price on Market! Customer ready to sell. Tires at 50%. Sisu Engine uses about 4 GPH! Front Blade. Hood Guard. One owner machine who took great care. - Item ID-12263 - Tom 800-315-9950 x6042010 Valmet 860.4 Forwarder - Incredible opportunity if you are looking for a new

forwarder! Only 722 hours. MFG warranty still applies. This machine is LOADED including the WEBASTO programmable pre-heater! Includes 2 sets of Eco Tracks; Blade, and Hood Guard. Owner changing jobs and no longer needs this machine. Save $50,000 off of new machine! - Item ID-12351 - Tom 800-315-9950 x6042002 Vermeer Horizonal Grinder Model HG365 - 2002 Vermeer Horizonal Grinder Model HG365, Cummins Engine, 365 HP, 20” capacity, New belt, New teeth, New floor plates - Item ID-12372 - Daren 800-315-9950 x6031997 Volvo A25C Articulated Dump Truck - Very good machine with 10,000 hours and one owner. $16,000 of recent service and maintenance by local Volvo Dealer. 6 x 6 all wheel drive


Carriage Linear & Set ShaftLewis Controls “Electronics for sawmills by sawmillers”

The Most Complete Line of Sawmill Machinery Since 1905!

Call (423) 698-02842007 Morbark 22 RXL ChipperItem ID: 12449Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

‘03 JD Franklin 185 Cable SkidderItem ID: 12447Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

2005 Prentice 280 Log LoaderItem ID: 12458Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

1991 CAT 518 Grapple SkidderItem ID: 11832Contact: Michelle800.315.9950 Ext. 603www.LBXonline.com

capacity. Super Value! - Item ID-12444 - Tom 800-315-9950 x6042005 Volvo L90E Wheel Loader w Forks & Bkt - 7561 Hours on this very nice woodyard loader. Volvo 119HP engine is stingy on gas. Includes 106” bucket for loading chips or waste. 20.5R25 tires at 80%. Comfortable cab with AC & Heat. Ready to load today. - Item ID-12404 - Tom 800-315-9950 x6041993 WHO P12-63XSHD - 1993 W.H.O. P12-63XSHD, 700 HP CAT 3412 Engine, owner used it to grind mulch, comes with misc. parts, Approx. 13000 hours and is working daily. Engine was rebuilt by Cat 4500 hours ago. Owner is selling due to buying a larger machine. This machine won’t last!!! - Item ID-12139 - Daren 800-

315-9950 x603WHO P10-43SHD Tub Grinder - This 10-foot WHO tub grinder is powered by a 300 hp CAT 3306B Diesel engine. This tub grinder has been partially refurbished with new mill with swinging hammers, new hydraulic motors and pumps, and bearings, hoses and belts replaced as needed. Owner has also given it a fresh paint job and had the engine checked over. Two inch screens are installed. There are less than 4000 hours on this tub grinder. This grinder will grind all types of wood waste including pallets, limbs and brush, yard trimmings, paper, and much more. This tub grinder is in great shape and ready for work. - Item ID-12360 - Michelle 800-315-9950 x603

PALLET MACHINERY2005 Bronco Model 2006

Pallet Nailing System - Pallet nailing system with roll-out. Was used to build 48”x40”. New in 2005. One owner. - Item ID-12108 - Daren 800-315-9950 x603Smart Bandsaw Dismantler - 64” table. Two-man operation. Less than 100 hours on a complete rebuild. Powered by a 15-hp 3-phase motor. Push button table height adjustment. 400-700 pallets per 8 hour shift. Manufactured by Smart Products. - Item ID-11066 - Michelle 800-315-9950 x603Williams 200 H.P. Hammermill Grinder - This 200 H.P. hammermill was recently removed from a sawmill where it was being used to grind wood waste to boiler fuel for several large industrial customers. This grinder has a very large capacity and would work well in the grinding of whole pallets because it has a top opening size of 27” X 52”. This grinder is powered by a 200 H.P. electric motor

that operates at 1200 RPM and uses 460 voltage for its power. The electric motor is direct coupled to the grinder through a shear coupler to prevent damage from being done to the grinder. This machine is equipped with a bar type screen that determines the size material the machine is going to produce. Of course this screen can be changed to achieve many different size materials being produced from the same machine. This machine comes with a size # 6 motor starter and 600 amp breaker which are enclosed in a large free standing electrical cabinet. This is a very nice clean unit and would work ideally for many grinding applications. - Item ID-12011 - Daren 800-315-9950 x603

RECYCLING EQUIPMENT2003 Morbark 7600 - 2003 Morbark 7600 3200 hours on a Cummins 12-cylinder engine, 1000 horsepower, ran daily, magnetic end


1996 John Deere 548G Grapple SkidderItem ID: 12439Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

pulley, wireless remote, 5X5, 8X8 screens, Twin Disc clutch, tight clutch, new mill rods, balanced mill, new lights, 85%-95% tires, very good value for a horizontal grinder this size! - Item ID-11830 - Michelle 800-315-9950 x6032009 Dynamic 585 Whole Tree Chipper - NEW! - Never Sold! Just 13 demo hours. Full factory warranty and updates. Model CH 585. S/N 5052. Cummins 500 HP Engine. 28” x 22” Capacity. Triple Chain Feed Deck. Cone Drum design for maximum fuel savings and best quality chips. Reversing engine fan. Best price on market! - Item ID-12400 - Tom 800-315-9950 x6042009 Dynamic/Vector 7000 Whole Tree Chipper - NEW -

Less than 125 Demo Hours. Powerful 700 HP engine. Weight = 60,000 lbs. Can handle up to 27” logs. 6 pocket drum gives maximum efficiency and best quality chips. Chipping - make chips to your specifications for fuel or other uses. Grind - process organics with light contaminants. Screen - size material to meet a variety of markets. Replaceable screens to fit customer specifications. CAN-BUS (3) mode operating system monitors critical instructions and all processing choices. - Item ID-12403 - Tom 800-315-9950 x604Rayco Stump Grinder Model RG1665AC - Rayco Stump Grinder Model RG1665AC, New teeth - Item ID-12374 -

Daren 800-315-9950 x6031999 CBI Model 4800 Grinder - 1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition - Item ID-12047 - Tom 800-315-9950 x6042009 CBI Model 6400T Grinder - CBI Grinder Model Magnum Force 6400T. Weight: 80,750 lbs. Cat C27 engine w/1050 HP. 1850 hours; 1 1/2” x 2” screen. 95% U/C. Customer has the feeder belt. Very good condition! - Item ID-12422 - Tom 800-315-9950 x6042006 GT25 Gyro Trac -

Refurbished undercarriage at 80% with new tracks and new set of cutter teeth, this machine is work-ready. 773 hours on Cummins 230HP diesel, overall good condition. Pressurized cab, winch, ROPS. - Item ID-12268 - Tom 800-315-9950 x604Haybuster IG-10 Tub Grinder - This 8-ft. tub is powered by a 275 hp CAT engine. This portable tub grinder has 48 swinging hammers and a set of 1” screens. Unit also has new clutch and belts, and the hammers are in good shape. It was being used to grind green waste but can also be used for processing many types of wood waste. With a pintle hitch for mobility, this machine is ready to be pulled to your site today and put to work. - Item ID-12361 - Michelle 800-315-9950 x6031987 Morbark 27 WCL NEEDS MOTOR - 1987 Morbark 27 WCL, Serial # 1796, Morbark 1000 Knuckle boom loader, 3 knife disc, Newer discharge chute, New banding around disc, Brakes and tires are also OK, Everything works well Newer clutch -- with outboard bearing, Had Cummins KTTA 750 HP engine -- needs repower - Item ID-12443 - Daren 800-315-9950 x6031993 Morbark Model 20 Tracked Chipper - Just over 8000 hours. Very solid and compact machine in good


Made in the USA

Nothing Eats Wood Like a Beaver

FEATURES:1 to 2 plus full cords per hour (128 cubic feet)Cuts up to 16” diameter and up to 20’ lengthsSplits wood from 12” to 24” lengthsSplitter cycle time 4.5 secondsPTO drivenHonda Engine GX-630 630cc

Call Toll Free1-800-569-6813

www.woodbeaver.net | [email protected]

Beaver Model 16THE FIREWOOD FACTORY COMING

SOONNew Models4

Safe

Durable

Reliable Convenient

$8995Optional Features Availale

Starting at

‘01 Timberwolf Pro MX Very low hours!!Item ID: 12438Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

1987 Morbark 27 WCLNeeds motor!

Item ID: 12443Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

1998 Morbark 1300 WCL, New Engine!Item ID: 12408Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

2002 New Holland TV140w/Brush CutterItem ID: 12414Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

condition and ready to work. Compact for the size. Has loader so unit is totally self contained. Tracks at 60%. Great value for a tracked chipper. - Item ID-12339 - Tom 800-315-9950 x6042008 Morbark 3800 Wood Hog - Super Clean machine! Only 3064 hours. Very well maintained. S/N 189-1033. JD 600 HP Tier 3 Engine. Remote control. Mag End Pulley. Hydraulic Fan. Break away mounts. PT Tec Wet Clutch. 3” Hex Screens. - Item ID-12277 - Tom 800-315-9950 x6042011 Morbark 5500 Flail Debarker/Delimber - Cat C15 engine w/600HP. Only 912 hours. 3 Flail design. Gross weight 68,060 lbs. Like new! Excellent condtion - Item ID-12423 - Tom 800-315-9950 x6042000 Morbark 22RXL Chiphavester - 2000 Morbark 22 Chiphavester, The infeed area has been beefed up with T-1 steel for more strength and longer life with less weight. Enclosed weatherized operator’s cab tilts hydraulically for transport . Overall Length 38” Transport height 13’ 6” Width 10” 6” Weight 70000 lbs. Chipping capacity 22” diameter 750 hp 3412 CAT engine, M1000 loader - Item ID-12397 - Daren 800-315-9950 x603

2007 Morbark 22 RXL Chipper - 8000 hrs. Just replaced feed tray, end spout, belly liners, hood liners, and one pump. Machine overall is in very good condition. S/N 2043. Includes loader with heat and AC. - Item ID-12449 - Tom 800-315-9950 x6042003 MORBARK 1300 WCL TUB GRINDER - 2003 MORBARK 1300 WCL TUB GRINDER, 1280 Hours, Morlift 400 loader with rotobec grapple, Cat 3412 engine, 860Hp, Twin Disc trans w dry clutch and driveline breakaway coupler. Air compressor. Cab is extra

clean. Includes all manuals in cab - Item ID-12401 - Daren 800-315-9950 x6031996 Morbark 2400 Chipper - 1996 Morbark 2400 Chipper, Twin Disc Clutch,New Paint and Decals,Panels in Great shape,Pintle Hitch,New Knives,12X16.5 Tires Price : 18,900.00 USD - Item ID-11879 - Daren 800-315-9950 x6031997 Rotochopper 166 (New Engine) - Cat 3406 engine with 68 hours rebuilt 2 months ago by Caterpillar Main frame hour meter 3898, New powerfeed and bearings about a year ago, New main bearing on rotor about 8 months ago, Turbo

2 years old, Spare tire/rim. This Machine is priced to sell quick!!!! - Item ID-12427 - Daren 800-315-9950 x6031998 Rotochopper 166 with Coloring system - 1998 Rotochopper 166 with Coloring system, less than 1000 hours on rebuilt Cat 3406 engine, 460hp, 2 sets of screens 2” and 4”, 2 types of hitches pintle and 5th wheel. This machine is priced well under its market value. - Item ID-12428 - Daren 800-315-9950 x6032003 ROTOCHOPPER CP118 - 2003 Rotochopper CP118 Portable wood chip processor with coloring unit.


Why?Why?We use only the highest quality nickel alloy steel NEW state of the art CNC milling centers for perfect pocket geometry

100 + years of combined hammering and manufacturing experience

Proudly made in the USAStock to 10 days on standard sizesNations largest distributor/manufacturer of saws and knives

www.usblades.net

CALL 800-862-4544Locations in

Hampden, ME Meridian, MS Florence, SC West Monroe, LA

This machine runs good but has an electric problem it keeps flipping the circuit breaker for the conveyor and auger Sold at this price As Is needing work to electric has extra screens, 2” screen. Will produce 35 - 40 yards per hour Price : 40,000.00 USD - Item ID-11973 - Daren 800-315-9950 x603Rotochopper MC-166 XLT - This horizontal grinder is powered by a 460 hp CAT 3406 Diesel engine. CAT engine was replaced while under warranty in 2003. Built-in colorizer adds to the productivity as raw materials are colored at the same time they are ground. In-feed hopper is 16’ long by 66” wide. Rotor is 66” wide by 26” diameter. Unit has a variety of screens & screen sizes. The frame has approximately 3050 hours and the engine has approximately 2000 hours. Although this unit has only been used to grind pallets, it is also excellent for dry wall, bark, brush, green waste, trees, plastics, and garbage. - Item ID-12362 - Michelle 800-315-9950 x6031993 WHO P12-63XSHD - 1993 W.H.O. P12-63XSHD, 700 HP CAT 3412 Engine, owner used it to grind mulch, comes with misc. parts, Approx. 13000 hours and is working daily. Engine was rebuilt by Cat 4500 hours ago. Owner is selling due to buying a larger machine. This machine won’t last!!! - Item ID-12139 - Daren 800-315-9950 x603WHO P10-43SHD Tub Grinder - This 10-foot WHO tub grinder is powered by a 300 hp CAT 3306B Diesel engine. This tub grinder has been partially refurbished with new mill with swinging hammers, new hydraulic motors and pumps, and bearings, hoses and belts replaced as needed. Owner has also given it a fresh paint job and had the engine checked over. Two inch screens are installed. There are less than 4000 hours on this tub grinder. This grinder will grind all types of wood waste including pallets, limbs and brush, yard trimmings, paper, and much more. This tub grinder is in great shape and ready for work. - Item ID-12360 - Michelle 800-315-9950 x603

ROLLING STOCK1983 Mack Cruiseliner w/tail mount 1986 Hood 7000 Series loader - Mack E6-350, 800k+ miles, 9 speed Fuller trans, 20k lb.front axle w/ floats, 44k lb. rears. New in last 2 years – windshield, paint, front rims, tires, batteries, reman transmission, conversion to S-cam brake assemblies on front axle, rear brake shoes, air compressor, air dryer, rear suspension w/ trunion, buckets, bushings, truss rods and frame rail, front grille, cab jack pump, recent clutch adjustment, fluids changed and more. Rubber at 75 percent, some minor leaks. Parts truck available. Hood 7000 loader w/ 22-foot boom, butt grapple and 11k# lift capacity @ 10 feet. New in last 2 years – main boom cylinder, left grapple cylinder, rod ends in right grapple and jib boom cylinders, all other cylinders repacked and/or rebuilt as needed, external filter assembly, valve sections and spools, most swivels and hard/soft lines. Some minor leaks. will take offers! - Item ID-11796 - Michelle 800-315-9950 x603


AJD Forest ProductsPremium Kiln Dried Hardwoods

Northern Red Oak is Our SpecialtyLake States Largest Producer of Industrial Lumber

Trelan DL18 Whole Tree ChipperItem ID: 11292Contact: Michelle Ph: 800-315-9950 x603www.LBXonline.com

1983 Mack Cruiseliner w/ Tail Mount1986 Hood 7000 Series LoaderItem ID: 11796Contact: Michelle800.315.9950 Ext. 603www.LBXonline.com

2003 CordKing 60 w/CordKing ConveyorItem ID: 12442Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

2005 Takeuchi Supertrack Skid Steerw/B74 Fecon Head; Low hrs.; Spare Bkt.; Winch!


www.LBXonline.com

SAWMILL1992 Sanborn sawmill Mini-Max - 1992 Sanborn sawmill Mini-Max, 36” x 20’ log capacity, 40 HP diesel engine, hydraulic power unit, uses 6” wide saw blades, includes (10) saws. Machine has a log cleaner ahead of the saw mounted on sawmill. - Item ID-12196 - Daren 800-315-9950 x6031995 Simonds Vertical Circle Saw Leveler - Excellent Condition. Low Hours-3984 Hours. Runs and looks like new. Ball Type KRO-9702. Serial # 05-9702-1131 Reduce run out with this machine allowing your saws to cut more accurately. Remove all lumps and bumps. Laser readings of the saws flatness are displayed on digital screen. Able to process saws up to 32” diameter and

plate thickness up to .150” thick. Price includes set up and training so you know you will be getting a great machine! - Item ID-12084 - Tom 800-315-9950 x6042001 Timber Harvester Grade Resaw System - 2001 Timber Harvester Grade Resaw System, Capacity 12”x12”x16’, 28” dia all-steel band wheels, 30 HP electric motor, 1-1/2” blade package, Powered rollers, Pop-up cross-over chains, Board seperator, Off-line kicker-type turner, Push button setworks, Seperate hydraulic power pack for feed works - Item ID-12190 - Daren 800-315-9950 x6032003 Wood-Mizer LT70 Sawmill with Gang Rip Saw Package - Sold as package only. Great value! LT70-HD Sawmill features: MODEL: WOOD MIZER LT 70; SERIAL

NO: 456 C 724163NBA1052 A108; YEAR: 2003; 18 ft. MAIN TABLE; 24 ft. TABLE EXTENSION; 21 ft. LOG TABLE & LOG ROLLERS; ATTACHMENTS FOR SHINGLE SAWING; MANY EXTRA ATTACHMENTS AND EXTRA BAND SAW BLADES; ENGINE FOR SAWMILL IS KABOTA DIESEL, MODEL 2KBXL01.5BAD. VIN: 1505 S-T-E. CONDITION: EXCELLENT, READY TO OPERATE. HOURS ON SAWMILL - 636.8; Details on Gang Rip Saw: DISEL ENGINE: KABOTA MODEL D905-E; VIN: 456A114163 MBA 2401 A2.02; FAMILY, 2KB X L01.OBCB; EXTENSION TABLES, EXTRA BLADES; CONDITION: EXCELLENT, READY TO OPERATE; HOURS ON GANG RIP SAW = 208 HOURS. - Item ID-12393 - Tom 800-315-9950 x604

2008 Challenger Grinder Model CHSP 200-4090 - Like New Condition. Only 315 hours. 120HP - 3 phase electric motor. 2 sets of screens, 3/4 and 1”. Photos say it all. Machine runs great. Owner lost contract. This machine makes great animal bedding. - Item ID-12284 - Tom 800-315-9950 x604

SHAVING EQUIPMENT2009 Salsco 30 Shaving Mill - 2009 Salsco 30 in. Shaving Mill, 1255 Hours, 4 Sets Of Knives, 8 ft. Blower Pipe Extention, C4,4TA Cat Engine, Original Owner, Excellent Condition, Can See Running! - Item ID-12182 - Chris 800-315-9950 x600VEHICLES-TRUCK/TRAILER/VAN

2000 Peterbuilt Logging Truck - 2000 Peterbuilt, N-14Cummins engine, 18spd., 120 Prentice loader, pup trailer. - Item ID-12159 - Michelle 800-315-9950 x603


The Richmond ShowEXPO RICHMOND 2012Richmond Raceway Complex * Richmond, Virginia

Friday May 18 and Saturday May 19, 20129:00a.m. until 5:00p.m.

The 33rd East Coast Sawmill and Logging Equipment Exposition

There is no charge to attend theexposition if you pre-register; there will be a $10.00 chargefor those who register on-site.

EXPO RICHMOND 2012Co-sponsored by Virginia Polytechnic Institute& State University Cooperative Extension and

Virginia Forest Products Association

Return by April 9, 2012 to: EXPO RICHMOND 2012 P. O. Box 160 Sandston, VA 23150-0160

Your Name: Nickname:

Company: Title:

Address:

City: State: ZIP:

Telephone: FAX:

E-mail: Country (if not USA):

PLEASE CHECK ALL CLASSIFICATIONS OF INTEREST: -- (You must check at least one)G Sawmilling G Logging G Pallet Production/Recycling G Dealer Sales G Paper/Pulp

G Equipment Manufacturer G Plywood/Panel G Other (Please Specify) :Pre-registration allows entrance to the Exposition (May 18 - 19, 2012, 9am-5pm) at no charge. On-site registration is $10.00.

Exhibitors: Please do not use this form. Contact show office for exhibitor registration information.Additional information is available on the Internet at www.exporichmond.com


FEBRUARY 23, 24, 25, 2012

LOGGING, CONSTRUCTION, TRUCKING & HEAVY EQUIPMENT EXPO

The 74th Annual OREGON LOGGING CONFERENCE

presents

LANE COUNTY EVENTS CENTER & FAIRGROUNDS - EUGENE, OR

ALL INSIDE EXHIBITS WILL BE DISPLAYED IN THE MAINEXHIBIT HALL AND PERFORMANCE HALL

For more information call 800-595-9191 or 541-686-9191

www.oregonloggingconference.com

CO N F E R E N C E

O R E G O NLOGGING

2012

“The World Needs Our Wood”

THE LUMBERMAN’S EXCHANGE PRSRT STD.U.S. Postage

PAIDPermit No. 212

Pulaski, TN

the original lumberman's magazine brought to you by lbx online

Documents