~ I v ,

THE KENYA GAZETTE Published by Authority of the Republic of Kenya

(Registered as a Newspaper at the G.P.O.)

Vol. CXX—No. 99 NAIROBI, 17th August, 2018 Price Sh. 60

CONTENTS GAZETTE NOTICES GAZETTE NOTICE5—(Contd.)

PAGE The Human Resource Management Professionals Act- I The Insolvency Act-Winding up Order and Creditors'

Appointment ....................................................................... 2906

The National Council for Law Reporting Act- Appointment ....................................................................... 2906

County Government Notices ................................................... 2906-2907,2953

The Land Registration Act-issue of Provisional Certificates, etc ................................................................... 2907-2915

The National Treasury-Statement of Actual Revenues and Net Exchequer Issues as at 31st July, 2018 ...................... 2915-2918

The Civil Aviation Act-Decisions of the Kenya Civil Aviation Authority on Applications for Air Service Licences ............................................................................. 2918-2922

The Standards Act-Declaration of Kenya Standards .......... 2922-2952

The Legal Education Act-Passing of Examinations and Pupilage.............................................................................. 2952-2953

The Companies Act-Intended Dissolution, etc.................... 2953-2954

The Competition Act-Proposed Acquisitions...................... 2954

The Records Disposal (Court) Rules-Intended Destniction of Court Records................................................................ 2954

The Political Parties Act-Change of Party Officials...........

The Physical Planning Act-Completion of Pail Development Plans, etc ....................................................

Disposal of Uncollected Goods ..............................................

Lossof Policies .......................................... ................................

Change of Names ............................................................

PAGE

2954-2955

2955

2955-2956

2956

2956-2962

2962-2963

SUPPLEMENT Nos. 110,111,112 and 113

Senate Bills, 2018

PAGE

The County Statutory Instruments Bill, 2018.................. 391

The Petition to County Assemblies (Procedure) Bill, 2018 413

The Treaty Making and Ratification (Amendment) Bill, 2018 421

The Statutory Instruments (Amendment) Bill, 2018....... 427

[2905

2922 THE KENYA GAZE'rI'E 17th August, 2018

Name and Address of Type of Service appliedfor Decision Applicant

Non-scheduled air services for passengers and cargo within/out of unto Kenya to/from points in AfricafMiddle EastlEurope and Asia usin, aircraft types C208, EMB 120, F50, F27, B737, CRJ200, Beechcraft King Air E90, D0228, G280,BE200,EMB190 and CL605 based at JKIA Wilson, Malindi, Moi, Eldoret and Kisumu airports.

Jetwest Airlines Limited Non-scheduled air service for passengers and cargo within/out of/into Deferred.

P. 0. Box 34538-00100 Kenya to/from points within Africa and Middle East

Nairobi Domestic scheduled air service for passengers on the routes:

JKIA/Wilson-Eldoret-JKIAIWilson

JKIAIWilson-Mombasa-Lamu/JKIA/Wilson

JKIA/Wilson-Wajir-JKIAfWilson

JKIA/Wilson-Kisumu-JKIAJWilson

JKIA/Wilson-Ukunda-Vipingo-JKlAfWilson

JKIA/Wilson-Homa Bay-JKIAIWilson

JKJA/Wilson-Mandera-JXJA/Wijson

vii) JKIA/Wilson-Lodwar-JKIA/Wilson

JKIA/Wilson-Lokichoggio-JKIA/Wilson

(iv) JKIA/Wilson-Malindi-Lamu-JKIA/Wilson using aircraft types FK50 an DHC8 based at JKIA and Wilson airport.

Phoenix Air Group Inc International non-scheduled air service for Passengers and cargo out Licence granted for one (1) yea 100 Phoenix Air Drive of/into Kenya to/from points in AfricalMiddle East/Europe; with effect from 23rd July, 2018. SW, Cartersville GA Emergency medical service out of/into Kenya to/from points in 30120 Africa/Middle East/Europe using aircraft type G1159A based at USA Cartersville, Georgia, USA and JKIA.

Dated the 13th August, 2018. G.M.KIBE,

PTG 000295/18-19

Director-General.

GAZErI'E NoTICE No.8455

THE STANDARDS ACT

(Cap. 496)

DECLARATION OF KENYA STANDARDS

PURSUANT to Section 9 (1) of the Standards Act, the National Standards Council declares the specifications or codes of practice appearing in the schedule hereto to be Kenya Standards with effect from the date of publication of this notice.

Number Title of Specification or Code of Practice

Chemical

KS ISO 3679:2015 Kenya Standard—Determination of flash no-flash and flash point—Rapid equilibrium closed cup method, First Edition

KS ISO 4263-3:2015 Kenya Standard—Petroleum and related products—Determination of the ageing behaviour of inhibited oils and fluids using the TOST test Part 3: Anhydrous procedure for synthetic hydraulic fluids, First Edition

KS ISO 13032:2012 Kenya Standard—Petroleum products- Determination of low concentration of sulfur in automotive fuels—Energy-dispersive X-ray fluorescence spectrometric method, First Edition

KS ISO 22854:2016 Kenya Standard—Liquid petroleum products - Determination of hydrocarbon types and oxygenates in automotive motor

- gasoline and in ethanol (E85) automotive fuel—Multidimensional gas chromatography method, first edition

KS ISO 12152:2012 Kenya Standard—Lubricants, industrial oils and related products—Determination of the foaming and air release properties of industrial gear oils using a spur gear test rig—Flender foam test procedure, First Edition

KS ISO 20844:2015 Kenya Standard—Petroleum and related products—Determination of the shear stability of polymer-containing oils using a diesel injector nozzle, First Edition

KS ISO 26422:2014 Kenya Standard—Petroleum and related products—Determination of shear stability of lubricating oils containing polymers- Method using a tapered roller bearing, First Edition

KS ISO/TS 15029-2:2012 Kenya Standard—Petroleum and related

products—Determination of spray ignition characteristics of fire-resistant fluids Part 2: Spray test—Stabilized flame heat release method, First Edition

KS ISO 18188:2016 Kenya Standard—Specification of polypropylene drinking straws, First Edition

KS 927:2016 Kenya Standard—Disinfecting general purpose liquid synthetic detergents- Specification, Second Edition

KS 1942:2016 Kenya Standard—Bathing bars- Specification, Second Edition

KS 2231:2016 Kenya Standard—Antibacterial bathing bars—Specification, Second Edition

KS 2639:2016 Kenya Standard—Copper sulphate- Specification, First Edition

KS 2637:2016 Kenya Standard—Chlorine tablets- Specification, Fitst Edition

KS 2638:2016 Kenya Standard - Stable bleaching powder - Specification, First Edition

Food and Agriculture

KS 1552:2016 Kenya Standard—Code of hygienic practice for production, handling, bulking, processing, marketi1g and distribution for milk and milk products, Second Editinn

17th August, 2018 THE KENYA GAZETTE 2923

KS 2640:2016 Kenya Standard—Fruits and nectars- Specification, First Edition

KS ISO 13559:2002 Kenya Standard - Butter, fermented milks and fresh cheese - Enumeration of contaminating microorganisms - Colony-count technique at 30 degrees C, First Edition

KS ISO 11290-1:1996 Amd 1:2004 Kenya Standard - Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes Part 1: Detection method, First Edition

KS 150 29842:2011 Amd.1:2015 Kenya Standard - Sensory analysis - Methodology - Balanced incomplete block designs, First Edition

KS 1095:2016 Kenya Standard - Food seasoning mixtures - Specification, Fifth Edition

KS ISO 13904:2016 Kenya Standard - Animal feeding stuffs - Determination of tryptophan content, First Edition

KS 2356:2016 Kenya Standd - Rio-fertilizer - Specification, Second Edition

KS 1758-2:2016 Kenya Standard - Horticulture industry code of practice Part 2: Fruits and vegetables, First Edition

KS 2657:2016 Kenya Standard - Warehouse and warehousing for bagged storage of cereals and pulses - Requirements, First Edition

KS 1690:2016 Kenya Standard - Rock phosphate fertilizers - Specification, Second Edition

KS 2260:2016 Kenya Standard - Natural calcium phosphate for manufacture of fertilizer - Specification, Second Edition

KS 2261:2016 Kenya Standard - Single superphosphate (powder) fertilizer —Specification, Second Edition

KS ISO 8157:2015 Kenya Standard - Fertilizers and soil conditioners - Vocabulary, Second Edition

KS ISO 17318:2015 Kenya Standard - Fertilizers and soil conditioners - Determination of arsenic, cadmium, chromium, lead and mercury Contents, First Edition

KS ISO 17319:2015 Kenya Standard - Fertilizers and soil conditioners - Determination of water-soluble potassium content - Potassium tetraphenylborate gravimetric method, First Editibn

KS ISO 17322:2015 Kenya Standard - Fertilizers and soil conditioners - Analytical methods for Sulfur Coated Urea (SCU),First Edition

KS ISO 17323:2015 Kenya Standard - Fertilizers and soil conditioners - Sulfur Coated Urea (SCU) - General requirements, First Edition

KS ISO 1842: 1991 Kenya Standard - Fruits and vegetable products - Determination of pH, First Edition

KS ISO 2447:1998 Kenya Standard - Fruits and vegetable products - Determination of tin content, First Edition

KS ISO 2448:1998 Kenya Standard - Fruit and vegetable products - Determination of ethanol content, First Edition

KS ISO 874:1980 Kenya Standard - Fresh fruits and vegetables - Sampling, First Edition

KS ISO 5517:1978 Kenya Standard - Fruits, vegetables and derived products - Determination of iron content -1 ,l0-phenanthroline photometric method, First Edition

KS ISO 5518:2007 Kenya Standard - Fruits, vegetables and derived products - Determination of Benzoic Acid Content - Spectrophotometric Method, First Edition

KS ISO 5523:1981 Kenya Standard - Liquid fruit and vegetable products - Determination of sulphur dioxide content (routine method), First Edition

KS ISO 6557-2:1984 Kenya Standard - Fruits, vegetables and derived products - Determination of ascorbic acid content Part 2: Routine methods, First Edition

KS ISO 6632:1981 Kenya Standard - Fruits, vegetables and derived products - Determination of volatile acidity, First Edition

KS ISO 6633:1984 Kenya Standard - Fruits, vegetables and derived products - Determination of lead content - Flameless atomic absorption spectrometric method, First Edition

KS ISO 6636-2:1981 Kenya Standard - Fruits, vegetables and derived products - Determination of zinc content Part 2: Atomic absorption spectrometric method, First Edition

KS ISO 6637:1984 Kenya Standard - Fruits, vegetables and derived products - Determination of mercury content - Flameless atomic absorption method, First Edition

KS ISO 750:1998 Kenya Standard - Fruit and vegetable products - Determination of titratable acidity, First Edition

KS ISO 75 1:1998 Kenya Standard - Fruit and vegetable products - Determination of water- insoluble solids, First Edition

KS ISO 762:2003 Kenya Standard - Fruit and vegetable products - Determination of mineral Impurities content, First Edition

KS ISO 763:2003 Kenya Standard - Fruit and vegetable products - Determination of ash insoluble in hydrochloric acid, First Edition

KS ISO 7952:1994 Kenya Standard - Fruits, vegetables and derived products - Determination of copper Content - Method using flame atomic absorption spectrometry, First Edition

KS ISO 8454-16:1995 Kenya Standard - Methods of test for tobacco and tobacco products Part 16: Cigarettes - Determination of carbon monoxide in the vapour - Phase of cigarette smoke - NDIR method, First Edition

KS ISO 15152:2003 Kenya Standard - Tobacco - Determination of the content of total alkaloids as nicotine - Continuous-flow analysis method, First Edition

KS ISO 15152:2003 Amd 1:2012 Kenya Standard - Tobacco - Determination of the content - of total alkaloids as nicotine - Continuous-flow analysis method AMENDMENT 1, First Edition

Electro technical

KS 2650:2016 Kenya Standard - Aerial bundled conductor systems - Specification, First Edition

KS 2611:2016 Kenya Standard - HDPE ducts - Main, mini & micro systems - Specification, First Edition

KS IEC 60666:2010 Kenya Standard - Detection and determination of specified additives in mineral insulating oils, Second Edition

KS IEC 61039:2008 Kenya Standard - Classification of insulating liquids, Second Edition

2924 THE KENYA GAZETTE 17th August, 2018

KS IEC 61109:2008 Kenya Standard - Insulators for overhead lines - Composite suspension and tension insulators for ac. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria, Second Edition

KS IEC 60502-2:2014 Kenya Standard - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U. = 12 kV) up to 30 kV (Urn = 36 kV) - Part 2: Cables for rated voltages from 6 kV (U rn = 72 kV) up to 30 kV (Urn = 36 kV), Second Edition

KS IEC 60502-4:2010 Kenya Standard - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U rn = 12 kV) up to 30 kV (Urn = 36 kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (U rn = 7,2 kV) up to 30 kV (Urn = 36 kV), Second Edition

KS LEC 60228:2004 Kenya Standard - Conductors of insulated cables, First Edition

KS IEC 60811-203:2012 Kenya Standard - Electric and optical fibre cables - Test methods for non-metallic materials Part 203: General tests - Measurement of overall dimensions, First Edition

KS IEC 60811-607:2012 Kenya Standard - Electric and optical fibre cables - Test methods for non-metallic materials Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene, First Edition

KS EAS 220:2001 Kenya Standard - Knitted polyester fabrics - Specification, First Edition

KS EAS 222:200 1 Kenya Standard - Knitted polyesterlcellulosic blended fabric - Specification, First Edition

KS EAS 227:2001 Kenya Standard - Knitted cotton fabric - Specification

KS IEC 61439-3:2012 Kenya Standard - Low-voltage switchgear and control gear assemblies Part 3: Distribution boards intended to be operated by ordinary persons (DBO), Second Edition

KS IEC 61439-4:2012 Kenya Standard - Low-voltage switchgear and control gear assemblies Part 4: Particular requirements for assemblies for construction sites (ACS), Second Edition

KS IEC 61439-5:2014 Kenya Standard - Low-voltage switchgear and controlgear assemblies Part 5: Assemblies for power distribution in public networks, Second Edition

KS IEC 61439-6:2012 Kenya Standard -. Low-voltage switchgear and controlgear assemblies Part 6: Busbar trunking systems (busways), First Edition

KS IEC 61970-1:2005 Kenya Standard - Energy management system application program interface (EMS-API) Part t: Guidelines and general requirements, First Edition

KS IEC TS 61970-2:2004 Kenya Standard - Energy management

system application program interface (EMS- API) Part 2: Glossary, First Edition

KS IEC/TS 6 1850-2:2003 Kenya Standard - Communication

networks and systems in substations Part 2: Glossary, First Edition

KS IEC 61850-3:2013 Kenya Standard - Communication networks and systems for power utility automation Part 3: General requirements, First Edition

KS IEC 61850-4:2011 Kenya Standard - Communication networks and systems for power utility automation Part 4: System and project management, First Edition

KS IEC 61850-5:2013 Kenya Standard - Communication networks and systems for power utility automation Part 5: Communication requirements for functions and device models, First Edition

KS IEC 61850-6:2009 Kenya Standard - Communication networks and systems for power utility automation Part 6: Configuration description language for communication in electrical substations related to LEDs, First Edition

KS IEC 62056-1-0:2014 Kenya Standard - Electricity metering data exchange - The DLMSICOSEM suite Part 1-0: Smart metering standardization framework, First Edition

KS IEC 62056-4-7:2015 Kenya Standard - Electricity metering data exchange - The DLMS/COSEM suite Part 4-7: DLMS/COSEM transport ayer for IP networks, First Edition

KS IEC 62056-5-3:2016 Kenya Standard - Electricity metering data exchange - The DLMS/COSEM suite Part 5-3: DLMS/COSEM application layer, First Edition

KS IEC 62056-6-2:20 16 Kenya Standard - Electricity metering data exchange - The DLMS/COSEM suite Part 6-2: COSEM interface classes, First Edition

KS IEC 62052-31:2015 Kenya Standard - Electricity metering equipment (AC) - General requirements, tests and test conditions Part 31: Product safety requirements and tests, First Edition

KS IEC 62055-51:2007 Kenya Standard - Electricity metering - Payment systems Part 51: Standard transfer specification (STS) - Physical layer protocol for one-way numeric and magnetic card token carriers, First Edition

KS IEC 60947-4-1:2012 Kenya Standard - Low-voltage switchgear and controlgear Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters, First Edition

KS IEC 60947-4-2:2011 Kenya Standard - Low-voltage switchgear and controlgear Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters, Second Editin

KS IEC 60947-4-3:2014 Kenya Standard - Low-voltage switchgear and controlgear Part 4-3: Contactors and motor-starters - AC semiconductor ontrollers and contactors for non-motor loads, Second Edition

KS ISO/IEC 27017:2015 Kenya Standard - Information technology - Security techniques - Code of practice for information security controls based on ISO/IEC 27002 for cloud services, First Edition

KS ISO/IEC TR 27023:2015 Kenya Standard - Information technology

- Security techniques - Mapping the revised editions of ISOIIEC 27001 and ISO/IEC 27002, First Edition

KS ISO/IEC TS30104:2015 Kenya Standard - Information Technology

- Security Techniques - Physical Security Attacks, Mitigation Techniques and Security, First Edition

KS ISOIIEC 17825:2016 Kenya Standard - Information teëhnology - Security techniques - Testing methods for the mitigation of non-invasive attack classes against cryptographic modules, First Edition

KS ISO/IEC 18014-4:2015 Kenya Standard - Information technology

- Security techniques - Time-stamping services Part 4: Traceability of time sources, First Edition

17th August, 2018 THE 1K.ENYA GAZETFE 2925

KS ISO/IEC 24760-1:2011 Kenya Standard - Informatic in techn ology

- Security techniques - A f. ramewi irk for identity management Part 1: Termi nology and concepts, First Edition

KS ISO/IEC 24760-2:2015 Kenya Standard - Informatioi i tec hnology

- Security techniques - A fn sme work for identity management Part 2: F :eference architecture and requirements, Fi rst Edition

KS ISO/TEC 29190:2015 Kenya Standard - Information ti chno1ogy

- Security techniques - Priv:ac capability assessment model, First Editioa

KS ISOJIEC 18033-5:2015 Kenya Standard - Information, technology

- Security techniques - incryption algorithms Part 5: Identity -b ised ciphers, First Edition

KS ISO/IEC TR 20004:2015 Kenya Standard - Informs it ion technology

- Security techniques - J 'tefining software vulnerability analysis undc:i ISO/IEC 15408 and ISO/TEC 18045, First JE dition

KS ISO/IEC 27006:2015 Kenya Standard - Inform ation technology - Security techniques - Requirements for bodies providing audit ani I certification of information security mam igement, Second Edition

KS ISO/IEC 27010:2015 Kenya Standard - Inforn lation technology - Security techniques - Information security management for inter-sector and inter-organizational communications, Second Edition

KS ISOIIEC 27013:2015 Kenya Standard - Inforr nation technology - Security techniques - Guidance on the integrated implementatic in of ISO/IEC 27001 and ISOIIEC 0000-1, Second Edition

KS ISO/IEC 27033-1:2015 Kenya Standard - Inforr nation technology

- Security techniques - Network security Part 1: Overview and i oncepts, Second Edition

KS ISOIIEC 11770-3:2015 Kenya Standard - Inforr nation technology

- Security techniques - Key management Part 3: Mechanisms u sing asymmetric techniques, Second Editior I

KS ISO/IEC 18033-1:2015 Kenya Standard - Infom iation technology

- Security techniques - Encryption algorithms Part 1: General, First Edition

KSISOIIEC TR 29196:2015 Kenya Standard - Guida nec for biometric

enrolment, First Edition

KS ISO/IEC TR 29194:2015 Kenya Standard - Inform sation technology

- Biometrics - Guid e on designing accessible and inclusive bi ometric systems, First Edition

KS ISO/IEC TR 29189:2015 Kenya Standard - Inforir, tation technology

- Biometrics - Evalus A ion of examiner assisted biometric applicat i ns, First Edition

KS ISO/IEC TS 20027:2015 Kenya Standard - - Biometrics

interoperability profiles - Best practices for slap tenprint captures, F irst Edition

KS ISO/IEC TR29156:2015 Kenya Standard - Is sformsition technology

- Guidance for sj ,ecifyii ig performance requirements to mee t securi ty and usability needs in appIicatiofl ; using biometrics, First Edition

KS ISO/IEC 30108-1:2015 Kenya Standard - Information technology

- Biometric Identity Assurance Services Part 1: BIAS services, First Edition

KS ISO/fEC TR 18268:20 13 Kenya Standard - Identification cards -

Contactiess integrated circuit cards - Proximity cards - Multiple PICCs in a single PCD field, First Edition

KS ISO/fEC 18328-1:2015 Kenya Standard - Identification cards -

ICC-managed devices Part 1: General framework, First Edition

KS ISO/IEC 18328-2:2015 Kenya Standard - Identification cards -

ICC-managed devices Part 2: Physical characteristics and test methods for cards with devices, First Edition

KS ISO/IEC 18584:20 15 Kenya Standard - Information technology - Identification cards - Conformance test requirements for on-card biometric comparison applications, First Edition

KS ISO/IEC TR 18781:2015 Kenya Standard - Identification cards -

Laundry testing of ID cards, First Edition

KSISO/IEC TR 19446:2015 Kenya Standard - Differences between the

driving licenses based on the ISO/fEC 18013 series and the European Union specifications, First Edition

KS ISO/IEC TR 30110:2015 Kenya Standard - Information technology

- Cross jurisdictional and societal aspects of implementation of biometric technologies - Biometrics and children, First Edition

KSISO/IEC 29794-6:2015 Kenya Standard - Information technology

- Biometric sample quality Part 6: Iris image data, First Edition

KS ISO 13934-1:2013 Kenya Standard - Determination of maximum force and elongation at maximum force using the strip method, First Edition

KS ISO 13934-2:2014 Kenya Standard - Determination of maximum force using the grab method, First Edition

KS ISO 13935-1:2014 Kenya Standard - Determination of maximum force to seam rupture using the strip method, First Edition

KS ISO 13935-2:2014 Kenya Standard - Determination of maximum force to seam rupture using the grab method, First Edition

KS ISO/TR 24697:2011 Kenya Standard - Guidelines on the determination of the precision of a standard test method by interlaboratory trials, First Edition

KS 2625:2016 Kenya Standard - Footballs - Specification, First Edition

KS 2636:2016 Kenya Standard. - Surgical masks - Specification, First Edition

KS ISO 9073-14:2006 Kenya Standard - Test methods for non wovens Part 14: Cover stock wetback, First Edition

KS ISO 9073-15:2007 Kenya Standard - Test methods for non wovens Part 15: Determination of air permeability, First Edition

KS EAS 96:2008 Kenya Standard - Sanitary towels - Specification, First Edition

Engineering

KS ISO 14946:2001 Kenya Standard - Small craft - Maximum load capacity, First Edition

KS ISO 6217:1982 Kenya Standard - Ship building - Inland navigation - Pilot crafts - Identification, painting and inscriptions, First Edition

2926

KS ISO 6216:1950

Kenya Standard - Ship building - Inland navigation - Pilot crafts - Classification and basic requirements, First Edition

KS ISO 3652:1975

Kenya Standard - Ship building - Inland vessels - Rope reels, First Edition

KS ISO 3969:1979

Kenya Standard - Ship building - Inland vessels - Operational documentation, First Edition

KS 2647:2016

Kenya Standard - Gypsum plasterboard - Specification, First Edition

KS 2641:2016

Kenya Standard - Standard test methods of conducting strength test of panels for building construction, First Edition

KS 2644:2016

Kenya Standard - Structural and thermal insulated panels - Code of practice, First Edition

KS 2648:2016

Kenya Standard - Health, safety and environmental guidelines for the construction and operation of timber treatment. plants, First Edition

(IQ,I 130:l993

Kenya Standard - Road vehicles - Hydraulic jacks - Specifications, First Edition,

KS,ISQ . 13216-l:1999 Kya Standard - Road vehicles - Anchorages in vehicles and attachments to anchorages for.child restraint systems Part 1: Seat bight anchorages and attachirnents, First Edition

KS ISO 13216-2:2004, Kenya Standard - Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems Part 2: Top tether anchorages and attachmtnsts, First Edition.

KS.150 13216-3:2006 Kenya Standard - Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems Part 3: Classification of child restraint dimensions and space in vehicle, First Edition

KS ISO ,13556: 1998 Kenya Standard —Road. vehi1es - Localization of exhaust 1 system lea:s. and equipmenspecifications, First Edition

KS ISO 1440:2005 Ienya Standard —Road vehicles - Wheels and rims - Use, general maintenance and safety requirements and out-of-service conditions, First Edition

ISJSO 4469-1 ;204 Ienya Standard: - Road vehicles. - Compressed natural gas (CNG) refuelling connector. Part. 1: 20 MPa (200 bar) conocctor, First Edition

KS ISO i44692:2007.- Kenya Standard - Road' vehicles - qornprcssed nanlral gas (CNG) refuelling connect9r, Pit 2: 20 MPa (200 bar) connector, size 2First Edttjon

I<S4SQ 14469-3:2006 Kenya, Standard, - Road vehicles - Coppressed, natural gas (CNQ): . refuelling cppnector PFt 3:, 25 MPa (250 bar) connector, First Etion

K, !9 1413:20fl, Kcya. Stanclarq 1 —R,oad vehiclea. - Pdstran pfotectiQn, . - Head impact test-methoçj,First Edition.

KS ISQ 1450$2006,, Kenya Standard —Road vehicles - Spark' pjugs - Tçiils,.Firt.liton,

KS ISO 147,91:209D, Kenya Sttndard —Road. vehicles - Heavy, cçnimercigl . veliiçle cqmbinations and articulated buses. - Lateral stability test methods , First Editiop

K$4SQ, 14792:2011 Kenya Standrçf - Read vehicje,s - Heavy ,cQercia1.vehic1e antl.buse---Steadystate circ.u1ar-tets, First Edition

KS I-SO 14790:2003 Kenya Standard —Road vehicles - Heavy commercial vehicles and buses - Lateral transient response test methods

KS 1734:201 6 Kenya Standard - Dividers for mathematical sets - Specification, Second Edition

Services

KS 265 1:20 16 Kenya Standard - Tourism entities using high angle techniques - Specification, First Edition

KS 2652:2016 Kenya Standard - Tourist Service vehicles - Code of practice, First Edition

KS 2653:2016 Kenya Standard - Motor vehicle rental operations - Requments,First Edition

KS 2654:2016 Kenya Standard - Tourist information services - Non-graphical symbols used in travel brochures, First Edition

KS ISO/TR 14468:2010 Kenya Standard - Selected illustrations of attribute agreement analysis,First Edition

KS ISO 3534-42014 Kenya Standard - Statistics - Vocabulai.y and symbols Part 4: Survey sampling, First Edition

KS ISO 16336: 1 Z01 4 Kenya Standard - Applications of statistical and related methods to new technology and product development process - Robust -parameter design (RP'D), First Edition

KS ISO/TS 175( 13:2015 Kenya Standard -. Statistical methoda- of uncertainty eyaluation - Guidance on evaluation of uncertainty using two-fac:tor crossed designs First Edition

KS ISO 13528:2' 015 Kenya Standard - Statistical methods for use in proficiency testing by interlaboratozy comparison, First Edition

KS ISO. 18404:21 915 Kenya Standard - Quantitative methods in process improvement - Six sigma -- Competencies for key personnel and their organizations in relation to Six Sigma and Lean implementation, First Edition

KS ISO 16355-1 2015- Kenya Standard - Application of statistical and related methods to new technology and product. development process Part 1: General principles and, perspectives, of Quality Function Deployment (QFD), First Edition

KS ISOITR 1315 )5:2015 Kenya Standard - Selected iliustrations of response surface method - Central composite design-, First Editioii

KS ISO/IEC 170214:2015. Kenya Standard - Conformity. assessment

- Requirements for bodies providing audit and certification of management systems Part 1: Requirements, First Edition

KSISO/IEC TS17021-5:201. 4- Kenya Standard - Conformity assessment

- Requirements for bodies providing audit and certification of management systems Part 5: Competence requirements for auditing and certification of asset management systems, First Editioi

KS ISO/lEd TS 17021-6:201 Al Kenya Standard - Conformity assessment

—Requirements for bodies providing audit and certification of management systems Part 6: Competence requirements for auditing and certification of business continuity management systems, First Edition

KS ISO/lEO TS 17021-7:201 4: Kenya,Standard - Conformity assessment

—Requirements for bodies providing audit and certification of management systems Part 7: Competence- requirements for auditing and certification of road, traffic. safety management-systems, First Edition

THE KENYA GATT'E

17th August, 2018

17th August, 2018 THE KENYA GAZEUE 2927

KS ISO/IEC TS 17027:2014 Kenya Standard - Conformity assessment

- Vocabulary related to competence of persons used for certification of persons, First Edition

KS ISO/IEC TR 17026:2015 Kenya Standard - Conformity assessment

- Example of a certification scheme for tangible products, First Edition

KS ISO 9186-1:2014 Kenya Standard - Graphical symbols Test methods Part 1: Method for testing comprehensibility, First Edition

KS ISO 9186-2:2008 Kenya Standard - Graphical symbols - Test methods Part 2: Method for testing perceptual quality, First Edition

KS ISO 9186-3:2014 Kenya Standard - Graphical symbols - Test methods Part 3: Method for testing referent association, First Edition

KS ISO 3864-2:2004 Kenya Standard - Graphical symbols - Safety colours and safety signs Part 2: Design principles for product safety labels, First Edition

KS ISO 23601:2009 Kenya Standard - Graphical symbols - Safety identification - Escape and evacuation plan signs, First Edition

KS ISO 7000:2014 Kenya Standard - Graphical symbols for use on equipment - Index and synopsis, First Edition

KS ISO 7010:2011 Kenya Standard - Graphical symbols - Safety colours and safety signs - Safety signs used in workplaces and public areas, First Edition -

KS ISO 17842-1:2015 Kenya Standard - Safety of amusement rides and amusement devices Part I: Design and manufacture, First Edition

KS ISO 17842-2:2015 Kenya Standard - Safety of amusement rides and amusement devices Part 2: Operation and use, First Edition

KS ISO 17842-3:2015 Kenya Standard - Safety of amusement rides and amusement devices Part 3: Requirements for inspection during design, manufacture, operation and use, First Edition

KSIS028560-1:20l4 Kenya Standard - Information and documentation - RFID in libraries -Part I: Data elements and general guidelines for implementation, First Edition

KS ISO 28560-2:2014 Kenya Standard - Information and documentation - RFID in libraries Part 2: Encoding of RFID data elements based on rules from ISO/LEC 15962, First Edition

KS ISO 28560-3:2014 Kenya Standard - Information and documentation - RFID in libraries Part 3: Fixed length encoding, First Edition

KS ISOITS 28560-4:2014 Kenya Standard - Information and

documentation - RFID in libraries Part 4: Encoding of data elements based on rules from ISO/IEC 15962 in an RFID tag with partitioned memory, First Edition

KS ISO 25577:20 13 Kenya Standard - Information and documentation - MarcXchange, First Edition

KS ISO 25964-2:2013 Kenya Standard - Information and documentation - Thesauri and interoperabilhty with other vocabularies Part 2: Interoperabiity with other vocabularies, First Edition

KS 2645-1:2016 Kenya Standard - Special educational needs - Tool-kit Part 1: Principles and policies, First Edition

KS 2645-3:2016 Kenya Standard - Special educational needs - Tool-kit Part 3: Resolution of disagreements, First Edition

KS 2645-10:2016 Kenya Standard - Special educational needs - Tool-kit Part 10: Transitional planning, First Edition

KS 22 17-6:2016 Kenya Standard - Glossary of terms used in the education sector Part 6: University education, Second Edition

KS 2642:2016 Kenya Standard - Electronic Pharmacy Information Systems, First Edition

KS 2656:2016 Kenya Standard - Electronic Laboratory Information Systems, First Edition

Trade Affairs

KS ISO 16212:2008 Kenya Standard - Cosmetics - Microbiology - Enumeration of yeast and mould, First Edition

KS ISO 18415:2007 Kenya Standard - Cosmetics - Microbiology - Detection of specified and non-specified microorganisms, First Edition

KS ISO 18416:2015 Kenya Standard - Cosmetics - Microbiology - Detection of Candida albicans, First Edition

KS ISO 21149:2006 Kenya Standard - Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilic bacteria, First Edition

KSISO2115O:2015 Kenya Standard - Cosmetics - Microbiology - Detection of Escherichia coli, First Edition

KS ISO 22717:2015 Kenya Standard - Cosmetics - Microbiology - Detection of Pseudomonas aeruginosa, First Edition

KS ISO 22718:2015 Kenya Standard - Cosmetics - Microbiology - Detection of Staphylococcus aureus, First Edition

The following standards are hereby confirmed:

Chemical

KS 1578-1:2010 Metal polishes - Specification Part 1: Ordinary liquid metal polishes

KS 1578-2:1999 Specification for metal polishes Part 2: Special metal polishes

KS 1581-1:2001 Specification for thermoplastic dustbins and lids Part 1: Thermoplastic dustbins

KS 1581-2:2001 Specification for thermoplastic dustbins and lids Part 2: Plastic and rubber dustbin lids.

KS 1582-1:2000 Method of test for plastics Part 1: Determination of carbon-black content in polyethylene moulding materials and compounds

KS 1582-3:2001 Method of test for plastics Part 3: Determination of bulk factor for plastic moulding materials

KS 1667:2001 List of pigments and colorants for use in plastic in contact with foodstuffs, pharmaceuticals and drinking water

KS 1427:1997 Specification for microcrystalline wax of petroleum origin

KS 515:2010 Gasohol 10 (V/V) - Specification KS 1507:1999 Specification for multipurpose automotive

gear lubricant (extreme pressure gear oil) KS 2053-1:2007 Carbon black used in rubber products -

Specification Part 1: Intermediate super abrasion furnace carbon black (ISAF) - N2l9 grade

KS 2053-2:2007 Carbon black used in rubber products - Specification Part 2: Intermediate super abrasion furnace carbon black (ISAF) - N220 grade

2928 THE KENYA GAZETTE - - 17th August, 2018

KS 2053-3:2007 Carbon black used in rubber products -

Specification Part 3: Intermediate super abrasion furnace carbon black (ISAF) -

N231 grade

KS 2053-4:2007 Carbon black used in rubber products -

Specification Part 4: High abrasion furnace carbon black (HAF) - N330 grade

KS 2053-5:2007 Carbon black used in rubber products -

Specification Part 5: Fast extrusion furnace carbon black (FEF) - N550 grade

Food and Agriculture

KS ISO 948:1980 Spices and Condiments - Sampling

KS EAS 57:2000 Part 1 and 2 Ground nuts - Specification

KS 2263:2010 Bay leaf— Specification

KS 2264:2010 Parsley - Specification

KS 2265:20 10 Mixed herbs - Specification

KS 1039:1993 Methods for liquoring coffee for analysis

KS 1052:2011 Roasted coffee beans and roasted ground coffee - Specification

KS 175:2011 Pure instant coffee - Specification

KS 173:2011 Glossary of terms used in coffee trade

KS 2221:2011 Coffee packaging - Specification

KS ISO 4150:2011 Green coffee or raw coffee size analysis manual and machine sieving

KS ISO 6666:2011 Coffee sampling - Triers for green coffee or raw coffee and parchment coffee

KS ISO 24114:2011 Instant coffee-Criteria for authenticity

KS ISO 6667:1985 Green coffee - Determination of proportion of insect-damaged beans

KS ISO 6668:2008 Green coffee - Preparation of samples for use in sensory analysis

KS ISO 20481:2008 Coffee and coffee products - Determination of the caffeine content using high performance liquid chromatography (HPLC) - Reference method

KS EAS 130:1999 Green coffee beans - Specification

KS ISO 8455:2011 Green coffee Guidelines for storage and transport

KS CAC/RCP 69:2009 Code of practice for the prevention and reduction of ochratoxin A contamination in coffee

KS ISO 15598:1999 Tea - Determination of crude fibre content

KS 65:20 13 Black tea - Specification

KS ISO 16140:2003 Microbiology of food and animal feeding stuffs - Protocol for the validation of alternative methods

KS ISO 16649-1:2001 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of B-glucuronidase-positive Escherichia coli Part 1: Colony-count technique at 44 using membranes and 5-bromo-4

KS ISO 16649-2:200 1 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of B-glucuronidase-positive Escherichia coli Part 2: Colony-count technique at 44 using 5-bromo-4-chloro-3-indo

KS ISO 16654:200 Microbiology of food and animal feeding stuffs - Horizontal method for the detection of escherichia coli 0157

KS ISO 17410:2001 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of psychrotrophic microorganisms.

KS ISO 17604:2003 Microbiology of food and animal feeding stuffs - Carcass sampling for microbiological analysis

KS ISO 18593:2004 Microbiology of food and animal feeding stuffs - Horizontal methods for sampling techniques from surfaces using contact plates and swabs

KS ISO 20837:2006 Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens -

Requirements for sample preparation for qualitative detection

KS ISO 20838:2006 Microbiology of food and anintal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens -

Requirements for amplification and detection for qualitative method

KS ISO 21527-1:2008 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of yeasts and moulds Part 1: Colony count technique in products with water activity greater than 0,95

KS ISO 21527-2:2008 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of yeasts and moulds Part 2: Colony Count technique in products with water activity less than or equal to 0,95

KS ISO 21528-2:2004 Microbiology of food and animal feeding stuffs - Horizontal methods for the detection and enumeration of Enterobacteriaceae Part 2: Colony-count method

KS ISO 21567:2004 Microbiology of food and animal feeding stuffs - Horizontal method for the detection of shigella spp

KS ISO 21807:2004 Microbiology of food and animal feeding stuffs - Determination of water activity.

KS ISO 21871:2006 Microbiology of food and animal feeding stuffs - Horizontal method for the determination of low numbers of presumptive Bacillus cereus - Most probable number technique and detection method

KS ISO 22174:2005 Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens -

General requirements and definitions

KS ISO 483 1:2006 Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Coliforms - Most probable number technique

KS ISO 4832:2006 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of Coliforms - Colony-count technique

KS ISO 6887-1:1999 Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 1: General rules for the preparation of the initial suspension and decimal dilutions

KS ISO 6887-2:2003 Microbiology of food and animal feeding stuffs - Preparation of test saples, initial suspension and decimal dilutions for microbiological examination Part 2: Specific rules for the preparation of meat

KS ISO 6887-3:2003 Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 3: Specific rules for the preparation of fish

KS CAC/GL 44:2003 Principles for the risk analysis of foods derived from modern biotechnology

17th August, 2018 THE KENYA GAZETTE - 2929

KS 2293:2011 Genetically modified organisms and derived products - General guidelines to methods of analysis

KS 2335:2011 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - sampling strategies

KS CAC/GL 74:2010 Guidelines on performance criteria and validation of methods for detection, identification and quantification and specification of specific DNA sequences and specific proteins in food

KS ISO 6887-4:2003 Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 4: Specific rules for the preparation of products other than milk and milk products, meat and meat products, and fish and fishery products

KS ISO 6887-5:2010 Microbiology of food and animal feeding stuffs- Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 5: Specific rules for the preparation of milk

KS ISO 6888-1:1999 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus Aureus and other species) Part 1: Technique using Baird-Parker agar medium

KS ISO 6888-2:1999 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus Aureus and other species) Part 2: Technique using rabbit plasma fibrinogen agar medium

KS ISO 6888-3:2003 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus Aureus and other species) Part 3: Detection and MPN technique for low numbers

KS 220-7:198 Methods for microbiological examination of foods Part 7: Method of examination for clostridium botulinum and clostridium botulinum toxin

KS ISO/TS 21872-1:2007 Microbiology of food and animal stuffs -

Horizontal method for the detection of potentially enteropathogenic vibrio spp. Part 1: Detection of vibrio parahaemolyticus and vibrio cholera

KS ISOTFS 21872-2:2007 Method for the detection of potentially

enteropathogenic Vibrio spp. Part 2: Detection of species other than Vibrio parahaemolyticus and Vibrio cholera

KS ISO 15213:2003 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions

KS ISO 7937:2004 Methods for the microbiological examination of food and animal feeding stuffs - Enumeration of Clostridium Perfringens

KS CAC/GL 22:1999 Revised regional guidelines for the design of control measures for street-vended foods in Africa

KS EAS 151:2000 Hazard Analysis Critical Control Points (HACCP)

KS CAC/GL 61:2007 Guidelines on the application of general principles of food hygiene to the control of listeria monocytogenes in foods

KS CAC/GL 69:2008 Guidelines for the validation of food safety control measures

KS CODEX STAN 193:1995 Codex general standard for the contaminants

and toxins in foods

KS 2243-1:2010 Specification for Puppy food Part 1: Complete meal

KS 2244:2010 Urea molasses block as ruminant feed supplement - Specification

KS 144:1979 Code of practice for pig housing

KS EAS 233:200 1 Specification for ostrich feed

KS 1651:2000 Glossary of terms for animal feedstuffs

KS 1741:2001 Method of test for T2 toxin in animal feedstuffs

KS 2616:1996 Specification for wheat bran

KS 63-3:1989 Methods of test for animal feedstuffs Part 3: Bacteriological tests.

KS CAC RCP 38:1993 Recommended international code of practice for control of the use of veterinary drugs

KS CAC/RCP 54:2004 Code of practice on good animal feeding

KS CAC/RCP 61:2005 Code of practice to minimize and contain antimicrobial resistance.

KS CACIMISC 5:1993 Glossary of terms and definitions (residues of veterinary drugs in foods)

KS CODEX STAN 3:1995 Residues of veterinary drugs in foods

KS EAS 230:2001 Malze bran as livestock feed - Specification

KS EAS 231:2001 Bone meal for compounding animal feeds -

Specification

KS EAS 232:2001 Maize gluten feed - Specification

KS EAS 287:2002 Oil-seed cakes for compounding livestock feeds - Specification

KS EAS 353:2004 Wheat bran for animal feeds - Specification

KS EAS 451-1:2007 Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes Part 1: Detection method

KS EAS 45 1-2:2007 Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes Part 2: Enumeration method

KS EAS 55:2000 Compounded pig feeds - Specification

KS EAS 58:2000 Dog feeds - Specification

KS EAS 75:2000 Dairy cattle feed supplements -

Specification

KS EAS 88:2000 Animal feedstuffs - Methods of sampling

KS EAS 90:2000 Compounded poultry feeds - Specification

KS ISO 10272-1:2006 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. Part 1: Detection method.

KS ISO 10990-4:1999 - Animal (mammal) traps Part 4: Methods for testing killing-trap systems used on land or underwater

KS ISO 10990-5:1999 Animal (mammal) traps Part 5: Methods for testing restraining traps

KS ISO 13903:2005 Animal feeding stuffs - Determination of amino acids content

KS ISO 15914:2004 Animal feeding stuffs - Enzymatic determination of total starch content

KS ISO 14181:2000 Animal feeding stuffs - Determination of residues of organochlorine pesticides - Gas chromatographic method

2930 THE KENYA GAZETTE 17th August, 2018

KS ISO 14182:1999 Animal feeding stuffs - Determination of residues of organophosphorus pesticides -

Gas chromatographic method

KS ISO 14183:2005 Animal feeding stuffs - Determination of monensin, narasin and salinomycin contents - Liquid chromatographic method using post-column derivatization

KS ISO 14565:2000 Animal feeding stuffs - Determination of vitamin A content - Method using high- performance liquid chromatography

KS ISO 147 18:1998 Animal feeding stuffs - Determination of aflatoxin B content of mixed feeding stuffs -

Method using high-performance liquid chromatography

KS ISO 14797:1999 Animal feeding stuffs - Determination of furazolidone content - Method using high- performance liquid chromatography

KS ISO 16472:2006 Animal feeding stuffs - Determination of amylase-treated neutral detergent fibre content (aNDF)

KS ISO 16634-1:2008 Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 1: Oilseeds and animal feeding stuffs

KS ISO 17372:2008 Animal feeding stuffs - Determination of zearalenone by immunoaffinity column chromatography and high performance liquid chromatography

KS ISO 17375:2006 Animal feeding stuffs - Determination of aflatoxin B 1

KS ISO 5061:2002 Animal feeding stuffs - Determination of castor oil seed husks - Microscope method

KS ISO 5510: 1984 Animal feeding stuffs - Determination of the available lysine

KS ISO 5984:2002 Animal feeding stuffs - Determination of crude ash

KS ISO 5985:2002 Animal feeding stuffs - Determination of ash insoluble in hydrochloric acid

KSISO649O-2:1983 Analysis of animal feeding stuffs -

Determination of calcium content Part 2: Atomic absorption spectrometric method

KS ISO 6491:1998 Animal feeding stuffs - Determination of phosphorus content - Spectrometric method

KS ISO 6492:1999 Animal feeding stuffs - Determination of fat content

KS ISO 6493:1999 Animal feeding stuffs - Determination of starch content - Polarimetric method

KS ISO 6495:1999 Animal feeding stuffs - Determination of water-soluble chlorides content

KS ISO 6496:1999 Animal feeding stuffs - Determination of moisture and other volatile matter content

KS ISO 6497:2002 Animal feeding stuffs - Sampling KS ISO 6651:2001 Animal feeding stuffs - Semi-quantitative

determination of aflatoxin B 1 - Thin-layer chromatographic methods

KS ISO 6654:1999 Animal feeding stuffs - Determination of urea Content

KS ISO 6655:1999 Animal feeding stuffs - Determination of soluble nitrogen content after treatment with pepsin in dilute hydrochloric acid

KS ISO 6865:2000 Animal feeding stuffs - Determination of crude fibre content - Method with intermediate filtration

KS ISO 6866:1999 Animal feeding stuffs - Determination of free and total gossypol

KS ISO 6867:2000 Animal feeding stuffs - Determination of vitamin B content - Method using high-performance liquid chromatography

KS ISO 6869:2000 Animal feeding stuffs - Determination of content of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc - Methods using atomic absorption spectrometly

KS ISO 6870:2002 Animal feediflg stuffs - Qualitative determination of zearalenone

KS ISO 7485:2000 Animal feeding stuffs - Determination of potassium and sodium content - Methods using flame-emission spectrometry

KS ISO 8607:2003 Artificial insemination of animals - Frozen semen of breeding bulls - Enumeration of living aerobic microorganisms

KS ISO 9831:1999 Animal feeding stuffs, animal products, faeces or urine - Determination of gross calorific value - Bomb calorimeter.

KS ISOITS 17764-1 Animal feeding stuffs-Determination of content, of fatty. acids Part 1: Preparation of methyl esters

KS CAC/RCP 45:1997 Code of practice for the reduction of aflatoxin BI in raw materials and supplemental feeding stuffs for milk producing animals.

KS 157 2010 Diammonium/Monoammonium phosphate fertilizer - Specification

Electrotechnical

KS IEC 60189-1:2007 Low-frequency cables and wires with PVC insulation and PVC sheath Part 1: General test and measuring methods

KS IEC 60189-2:2007 Low-frequency cables and wires with PVC insulation and PVC sheath Part 2: Cables in pairs, triples, quads and quintuples for inside installations

KS IEC 60684-1:2003 Flexible insulating sleeving Part I: Definitions and general requirements

KS ifiC 62021-1:2003 Insulating liquids - Determination of acidity Part I: Automatic potentiometric titration

KS IEC 61065:1991 Method for evaluating the low temperature flow properties of mineral insulating oils after ageing

KS IEC 60684-3-320 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving - Sheets 320 - Polyethylene terephthalate textile sleeving, lightly impregnated

KS IEC 61868:1998 Mineral insulating oils - Determination of kinematic viscosity at very low temperatures

KS IEC 61198:1993 Mineral insulating oils - Methods for the determination of 2-furfural and related compounds

KS 1603:2000 Specification for coupling devices for welding cables

KS IEC 60282-2:2000 Specification for high-voltage fuses Part 2: Expulsion fuses

KS IEC 60465:1998 Specification for unused insulating mineral oils for cables with oil ducts

KS IEC 60317-15:2004 Specifications for particular types, of winding wires Part 15: Polyesterlmide enamelled round aluminium wite, class 180

KS IEC 61125:1992 Unused hydrocarbon-based insulating liquids - Test methods for evahu$iu the oxidation stability

KS .IEC 60189-1:2007 Low -frequency cables and wires with PVC insulation and PVC sheath Part I: General test and measuring methods

KS IEC 60189.2:2007 Low-frequency cables and wires with PVC insulation and PVC sheath Part 2: Cables in pairs, triples. quads and quintuple8 for inside installations

17th August, 2018 THE KENYA GAZETTE 2931

KS LEC 60684-1:2003 Flexible insulating sleeving Part 1: Definitions and general requirements

KS IEC 62021-1:2003 Insulating liquids - Determination of acidity Part 1: Automatic potentiometric titration

KS fEC 61065:1991 Method for evaluating the low temperature flow properties of mineral insulating oils after ageing

KS fEC 60684-3-320 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving - Sheets 320 - Polyethylene terephthalate textile sleeving, lightly impregnated

KS IEC 61868:1998 Mineral insulating oils - Determination of kinematic viscosity at very low temperatures.

KS IEC 61198:1993 Mineral insulating oils - Methods for the determination of 2-furfural and related compounds

KS 1603:2000 Specification for coupling devices for welding cables

KS IEC 60282-2:2000 Specification for high-voltage fuses Part 2: Expulsion fuses

KS fEC 60465:1998 Specification for unused insulating mineral oils for cables with oil ducts

KS fEC 60317-15:2004 Specifications for particular types of winding wires Part 15: Polyesterimide enamelled round aluminium wire, class 180

KS fEC 61125:1992 Unused hydrocarbon-based insulating liquids - Test methods for evaluating the oxidation stability

KS 1859-5:2010 Electrical power transmission and distribution- High-voltage operating regulations Part 5: Standard procedure and terminology for the issuing of operating instructions

KS 1917:2010 ElectrIc power transmission and distribution - Energized power lines - Maintenance methods

KS 1876-2:2010 Electric power transmission and distribution - Overhead power lines for conditions prevailing in Kenya Part 2: Safely

KS 1859-2:2010, Electrical power transmission and distribution- High-voltage operating regulations Part 2: Voltage colour coding diagrammatic displays in control rooms- Colour coding for wall-mounted operating diagram

KS 1992:2010 Electrical power transmission and distribution - Code of practice for animal deterrents for electric power supply substations

KS 1877:2010 Electrical power transmission and distribution - Guidelines for the application design, planning and conatnietion of medium voltage overhead power lines up to and including 22 kV, using wooden poles

KS 1878-0:2010 Electrical power transmission and distribution - Guidelines for the provision of electrical distribution networks in residential areas Part 0: Definitions

KS 1818-1:2010 Electrical power transmission and distribution - Guidelines for the provision of electrical distribution networks in residential areas Part 1: Planning and design of distribution systems

KS 1878-2-3:2010 Electrical power transmission and distribution - Guidelines for the provision of electrical distribution networks in residential ateas Part 2-3: Pieferred methods and materials for the installation

KS 1878-3:2010 Electrical power transmission and distribution - Guidelines for the provision of electrical distribution networks in residential areas Part 3: Overhead distribution in very low, low and moderate conditions

KS 1859-3:2010 Electrical power transmission and distribution- High-voltage operating regulations Part 3: Model regulations -

Recommended model regulations relating to power systems for operating, access control and supervision of systems that exceed 1000 v, distribution of electricity

KS 1876-1:2010 Electrical power transmission and distribution - Overhead power lines for conditions prevailing in Kenya Part 1: Code of practice

KS 1883:2010 Electrical power transmission and distribution - Overhead power lines -

Installation of line conductors KS 2236-1:2010 Electricity supply - Quality of supply Part 1:

Minimum standards.

KS 2236-2:2010 Electricity supply - Quality of supply Part 2: Reporting guidelines

KS 2236-3:20 10 Electricity supply - Quality of supply Part 3: Voltage characteristics, compatibility levels, limits and assessment methods

KS 22364:2010 Electricity supply - Quality of supply Part 4: Application guidelines for utilities

KS 1868:2007 Overhead power lines - Loading tests on structures

KS IEC 61811-55:2010 Electromechanical elementary relays of assessed quality Part 55: Blank detail specification - Electromechanical all-or- nothing telecom relays of assessed quality -

Two change-over contacts, 11 mm x 7

KS IEC 61869-1:2010 Instrument transformers. Part 1: General requirements

KS IEC 60269-3:2010 Low-voltage fuses Part 3: Supplementary requirements for fuses for use by unskilled persons ( fuses mainly for household and similar application) - Examples of standardized systems of fuses A to F

KS IEC 60439-4:2010 Low-voltage switchgear and control assemblies Part 4: Particular requirements for assemblies for construction sites (ACS)

KS IEC 61558-2:2010 Safety of power transformers, power supplies, reactors and similar products Part 2-I: Particular requirements and test a for separating transformers and power supplies incorporating separating transformer

KS fEC 62109-1:2010 Safety of power converters for use in photovoltaic power systems Part 1: General requirements

KS 1EC61558-2-2:2010 Safety of power transformers, power.- isupplies, reactors and similar product Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformer

KS IEC 61558-1:2010 Safety of power transformers, power supplies, reactors and similar products Part 1: General requirements and tests

KS EAS 4962008 General purpose fuse links for domestic and similar purposes (primarily for use in plugs) - Specification

KS 1864:2010 Battery chargers - Performance

KS 1851-1:2009 Thermal solar systems and components -

Solar collectors Part 1: General requirements.

KS 1851-2:2009 Thermal solar systems and components -

Solar collectors Part 2: Test methods

2932 THE KENYA GAZE'fl'E --17th August, 2018

KS 1852-1:2009 Thermal solar systems and components -

Factory made systems Part 1: General requirements.

KS 1852-2:2009 Thermal solar systems and components -

Factory made systems Part 2: Test methods

KS 1855-1:2009 Thermal solar systems and components -

Custom built systems Part 1: General requirements

KS 1855-2:2009 Thermal solar systems and components -

Custom built systems Part 2: Test method

KS 1855-3:2009 Thermal solar systems and components -

- Custom built systems Part 3: Performance characterization of stores for solar heating systems

KS 1869:2009 Determination of solar reflectance near ambient temperature using a portable solar reflectometer - Test method

KS 1870:2009 Exposure of solar collector cover materials to natural weathering under conditions simulating stagnation mode - Test method

KS 1872:2009 Standard practice for non-operational exposure and inspection of a solar collector

KS 1873:2009 Standard practice for exposure of cover materials for solar collectors to natural weathering under conditions simulating operational mode

KS ISO 13434:2008 Kenya Standard - Geosynthetics -

Guidelines for the assessment of durability

KS ISO 105 A02:1993 Kenya Standard - Textiles - Tests for colour fastness Part A02: Grey scale for assessing change in colour

KS ISO 105 A03:1993 Kenya Standard - Tests for colour fastness Part A02: Grey scale for assessing staining, First Edition

KS ISO 105 A04: 1989 Kenya Standard - Textiles - Tests for colour fastness Part A04: Method for the instrumental assessment ofthe degree of staining of adjacent fabrics

KS 2234:20 10 Kenya Standard - Denim fabrics - Specification

KS ISO 105 BOl :1994 Kenya Standard - Textiles - Tests forcolour fastness Part BOl: Colour fastnes to light: Daylight

KS 2234:2010 Kenya Standard - Denim fabrics - Specification

KS 2238:20 10 Kenya Standard - Baby shawls - Specification

KS 2245:2010 Kenya Standard - Cotton ear buds - Specification

KS 1028:1991 Methods of test for webbings and braids

KS 10351991 Specification for kitenge

KS 1037:1999 Methods of test for woven bags

KS 1056-1:1990 Specification for woven wrapping cloth Part 1: Polypropylene cloth

KS 1057-1:1990 Methods of test for complete filled transport packages - Woven bags Part 1: Method for the determination of resistance to vertical impact by dropping

KS 1052:1990 Method of test for complete filled transport packages - Bags

KS 1057-3:1990 Methods of test for complete, filled transport packages - Woven bags Part 3: Method of test for stacking using compression tester

KS 1126-1:1993 Kenya standard for neckties Part 1: Neckties made from woven fabrics

KS 119:1981 Method for determination of breaking load and elongation (strip method) of woven fabrics

KS 120:1981 Method for determination of mass per unit length and mass per unit area of woven or knitted fabrics

KS 121:1981 Methods for determination of threads per centimeter in woven fabrics

KS 1327:1999 Method for determination of resistance of textiles to attack by larvae of certain insect pests.

KS 1328-1:1999 Method for determination of resistance of textiles to microbiological deterioration Part 1: Soil burial

KS 1328-2:1999 Method for determination of resistance of textiles to microbiological deterioration Part

Agar plate using fungi

KS 1328-3:1999 Method for determination of resistance of textiles to microbiological deterioration Part

Agar plate using bacterial

KS 134:1981 Specification for woven bags (natural fibres) for sugar

KS 1389-1:1998 Test Methods for Cotton Fibres Part 1: Equipment and artificial lighting for cotton classing rooms

KS 1389-5:1998 Test methods for cotton fibres Part 5: Determination of breaking tenacity of flat bundles

KS 1396:1997 Test method for determination of resistance for surface wetting of fabrics (spray test)

KS 1434:1999 Specification for coated tarpaulin fabric

KS 1435:1999 Specification for coated fabrics for shoes

KS 1784:2003 Test method for determination of non-lint content of cotton

KS 1965-4:2006 Sports mats Part 4: Determination of shock absorption

KS 1965-5:2006 Sports mats Part 5: Determination of the base friction

KS 1965-6:2006 Sports mats Part 6: Determination of the top friction

KS 1965-7:2006 Sports mats Part 7: Determination of static stiffness

KS 212:1982 Definitions of general terms, basic weaves and plans for drafting, denting and lifting

KS 2234:2010 Denim fabrics - Specification

KS 273:1999 Specification for woven bags (100 per cent) for clean coffee beans

KS 363:1982 Methods for determination of dimensional change of woven fabrics on commercial laundering near the boiling point

KS 364:2006 Woven cellulosic fibre apparel fabrics -

Specification

KS 365:2006 Woven man-made fibres apparel fabric -

Specification

KS 366:2006 Woven polyester/cellulosic blended apparel fabric - Specification

KS 437:1989 Method for determination of tear resistance of woven fabrics by falling pendulum (Elmendorf) apparatus

KS 48:1979 Determination of resistance to tearing of woven fabrics by wing-rip technique

KS 482:1994 Specification for woven bags (polypropylene) for seeds

KS 520:1992 Specification for woven fabrics used for suits, jackets, slacks, trousers and skirts

KS 214-1:1982 Specification for woven interlinings Part 1: Woven interlinings for shirts

KS 214-2:1985 Specification for woven interlinings Part 2: Woven lining for apparel fabrics

17th August, 2018 THE KENYA GAZETTE 2933

KS 214-3:1981 Specification for woven interlinings Part 3: Woven lining fabrics for men's and boys' apparel

KS 528:1984 Specification for flat cotton wicks

KS 539:1985 Specification for men's and boys' woven pyjama fabric.

KS 542-1:1990 Specification for the national flag of Kenya Part 1: Cotton, man-made fibres and blends

KS 542-2:1990 Specification for the national flag of Kenya Part 2: Wool/Synthetic blends

KS 544:1985 Specification for woven bags (natural fiber) for rice

KS 586-1:1985 Specification for webbings Part 1: Cotton webbing

KS 586-2:1988 Specification for webbings Part 2: Webbings made wholly or partly from synthetic fibres

KS 606:1993 Specification for bed sheets made from blended polyester/cellulosic fabric or polyester and cellulosic combination fabric

KS 607-1-5:1985 Specification for standard adjacent fabrics

KS 607-7:1990 Specification for standard adjacent fabrics Part 7: Triacetate

KS 607-8:1990 Specification for standard fabrics Part 8: Cotton

KS 628:1997 Specification for elastic webbing

KS 697-1:1990 Code of practice for grading of textile materials Part 1: Fabrics

KS 777-1:1989 Glossary of terms relating to weaving and weaving preparatory - Part 1: Cone and cheese winding

KS 777-2:1987 Glossary of terms related to weaving and weaving preparatory - Part 2: Warp preparation

KS 779-3:2003 Carpets - Specification Part 3: Woven carpets

KS 834-1:1987 Test methods for determination of dimensions of woven fabrics Part 1: Measurement of width of pieces

KS 834-2:1987 Test methods for determination of dimensions of woven fabrics Part 2: Measurement of length of pieces

KS 893-2:1994 Specification for upholstery fabrics Part 2: Coat fabrics

KS EAS 156-1:2000 Woven bags from natural fibres -

Specification Part 1: Woven bags for cereals

KS EAS 156-2:2000 Woven bags from natural fibres -

Specification Part 2: Woven bags for milled products

KS EAS 156-3:2000 Woven bags from natural fibres -

Specification Part 3: Woven bags for sugar

KS EAS 225-1:2001 Umbrella fabrics - Specification Part 1: Cotton fabrics

KS EAS 225-2:2001 Umbrella fabrics - Specification Part 2: Man-made fibre fabric

KS EAS 225-3:2008 Umbrella fabrics - Specification Part 3: Silk fabrics

KS EAS 226:2001 Kitenge - Specification

KS EAS 248:200 1 Textiles - Methods for determination of threads per centimetre in woven fabrics.

KS EAS 259-1:2001 Packaging - Methods of test for complete, filled transport packages - Woven bags Part 1: Determination of resistance to vertical impact by dropping.

KS EAS 261 Textile - Determination of pH value of aqueous extracts of textile materials

KS EAS 262:2007

Woven fabrics - Determination of dimensional change on commercial laundering near the boiling point

KS EAS 252

Textile fabrics - Method for determination of water repellency of fabrics by cone test

KS ISO 12947-1:1998 Textiles - Determination of abrasion resistance of fabrics by Martindale method Part 1: Martindale abrasion testing apparatus

KS ISO 12947-2:1998 Textiles - Determination of abrasion resistance of fabrics by Martindale method Part 2: Determination of specimen breakdown

KS ISO 12947-3:1998 Textiles - Determination of abrasion resistance of fabrics by Martindale method Part 3: Determination of mass loss

KS ISO 12947-4:1998 Textiles - Determination of abrasion resistance of fabrics by Martindale method Part 4: Assessment of appearance change.

KS ISO 13937-1:2000 Textiles - Tear properties of fabrics Part 1: Determination of tear force using Ballistic pendulum method (Elmendorf)

KS ISO 13937-2:2000 Textiles - Tear properties of fabrics Part 2: Determination of tear force of trouser- shaped test specimens (Single tear method)

KS ISO 13937-3:2000 Textiles - Tear properties of fabrics Part 3: Determination of tear force of wing-shaped test specimens (Single tear Method)

KS ISO 139374:2000 Textiles - Tear properties of fabrics Part 4: Determination of tear force of tongue- shaped test specimens (Double tear Method)

KS ISO 5085-1:1989 Textiles - Determination of thermal resistance Part 1: Low thermal resistance

KS ISO 5085-2:1990 Textiles - Determination of thermal resistance Part 2: High thermal resistance.

KS ISO/IEC 7501-1:2008 Kenya Standard - Information Technology

Identification cards- Machine readable travel documents Part 1: Machine readable passport

KS ISO/IEC 7501-2:1997 Kenya Standard - Information Technology

Identification cards - Machine readable travel documents Part 2: Machine readable visa

KS ISO/IEC 750 1-3:2005 Kenya Standard - Information technology

identification cards - Machine readable travel documents Part 3: Machine readable official travel documents

KS ISO/IEC 180 13-1:2005 Kenya Standard - Information technology

—Personal identification - ISO compliant driving license Part 1: physical characteristics and basic data set

KS ISO/LEC 180 13-2:2008 Kenya Standard - Information technology

- Personal identification - ISO compliant driving license Part 2: Machine-readable technologies, First Edition

KS ISOIIEC 18013-3:2005 Kenya Standard - Information technology

identification cards - Machine readable travel documents Part 3: Machine readable official travel documents

KS 1087-2:2000 Terminology work - Vocabulary Part 2: Computer applications

KS ISO/IEC 23988:2007 Information technology - A code of practice for the use of information technology (IT) in the delivery of assessments

2934

KS ISOIIEC 2382-36:20008

Information Technology - Vocabulary Part 36: Learning education and training

KS ISO/IEC/TR 24704:2004

Information technology - Customer premises cabling for wireless access points

KS 1087-2:2000

Terminology work - Vocabulary Part 1: Theory and application

KS ISO/IEC 2382-36:2008

Information Technology - Vocabulary Part 36: Learning education and training

KS 08.1221:1995

Specification for crepe bandages

KS 639-1:1989

Specification for bandages Part 1: Cotton gauze bandages

Engineering

KS 301-2:2010

Plywood - Specification Part 2: Marine plywood

KS 301-3:2010

Plywood - Specification Part 3: Shuttering work plywood

KS 2222:2010

Synthetic resin adhesives for plywood - Specification

KS 1607:2001

Specification for wooden packaging cases

KS 2226:2010

Plywood - Test method

Services

.KSISO90042009

Managing for the sustained success of an organization - A quality management approach

KS ISO 10005:2005

Quality management systems - Guidelines for quality plans

KS ISO 100062003

Quality management systems - Guidelines for quality management in projects

KS ISO 10003:2007

Quality management - Customer satisfaction - Guidelines for dispute resolution external to organizations

KS ISO 10014:2006

Quality management - Guidelines for realizing fmancial and economic benefits

KS ISO 100192005

Guidelines for the selection of quality management system consultants and use of their services

KS ISO 19011:2011

Guidelines for auditing management systems

KS ISO 14005:201 0

Environmental management systems - Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation

KS ISO 14006:2011

Environmentaj management systems - Guidelines for incorporating ecodesign

KS ISO 11462-1:2001 Guidelines for implementation of statistical process control (SPC) Part I: Elements of SPC

KS 1S024153:2009 Random sampling and randomization procedures

KS ISO 13053-22001 Quantitative methods in process improvement - Six Sigma Part 2: Tools and techniques

KSISO 13448-2:2004 Acceptance sampling procedkires based on the allocation of priorities principle (APP) Part 2 Coordinated single sampling plans for acceptance sampling by attributes

KS ISO/!EC 17007:2009 COnformity assessment - Guidance for drafting normative documents suitable for use for conformity assessment

KS 1SO'IEC 17021:2011 Conformity assessment Requirements for bodies providing audit and certification of management systems

KS ISO/IEC 1704:2010 Conformity assessment - General requirements for proficiency testing

Trade Affairs

KS ISO 20022-6:2009 Kenya Standard - Financial services - Universal Financial Industry message scheme Part 6: Message

KS ISO 22307:2008 Kenya Standard - Financial Services - Privacy Impact Assessment

KS ISO 13616-2:2007 Kenya Standard - Financial services International Bank Account Number (IBAN) Part 2: Role and responsibilities of the Registration Authority

KS 150 13492:2007 Kenya Standard - Financial Services - Key management related data element- application and usage of ISO 8583 data elements 53 and 96

KS ISO 6166:2001 Kenya Standard - Securities and related financial instruments - International Securities Identification Numbering System (ISIN)

KS ISO 8532: 1995 Kenya Standard - Securities - Format for transmission of certificate npnsbcrs

KS ISO 9019:1995 Kenya Standard - Securities - Numbering of certificates

KS ISO 10383:2003 Kenya Standard - Securities and related financial instruments - Codes for exchanges and Market Identification (MIC)

KS iSO 13616-1:2007 Kenya Standard Financial services - International bank account number (IBAN) Part 1: Structure of the IBAN

KS 150 10962:1997 Kenya Standard - Securities and related financial instruments - Classification of Financial Instruments (CFI code)

KS ISO 15782-1:2009 Kenya Standard - Certificate management for financial services Part I: Public key certificates

KS 1570-1:2001 Specification for skin powders Part I: Body face powders

KS 1570-2:2007 Skin powders - Specification Part 2: Baby powders

KS EAS 862000 Sesame (simsim) oil for cosmetic industry -

Specification

KS 800:1989 Specification for coconut oil for cosmetic industry

KS 797:1989 Specification for sesame (simsim) oil for cosmetic industry

KS 798:1989 Specification for groundnut (peanut) oil for cosmetic industry

KS 799:1989 Specification for castor oil for cosmetic industry

KS 1767-1:2006 Bath preparations - Specification Part 1: Foam baths and shower gels

KS 1769-1:2005 Glycerine Part I: Soap lye crude glycerine -

Specification

KS 1769-22005 Glycerine Part 2: Saponification (hydrolyzer) crude glycerine - Specification

KS 1769-3:2005 Glycerine Part 3: Analytical reagent (AR) glycerine - Specification

KS 1769-4:2005 Glycerine Part 4: Chemically pure (CP) glycerine - Specification

KS 1769-5:2005 Glycerine Part 5: Industrial white (1W) glycerine - Specification

KS 1769-6:2005 Glycerine Part 6: Technical (TECH) glycerine - Specification

KS 1769-7:2005 Glycerine Part 7: Dynamite grade (DYN) glycerine - Specification

THE KENYA GAZEFE

17th August, 2018

17th August, 2018 THE KENYA GAZETTE 2935

The following standards are hereby withdrawn forthwith:

KS 927:1997 Kenya Standard - Specification for disinfecting general purpose detergents, to be replaced by KS 927:2016

KS 1942:2005 Kenya Standard - Bathing bars - Specification to be replaced by KS 1942:20 16

KS 223 1:2010 Kenya Standard - Antibacterial bathing bars - Specification to be replaced by KS 2231:2016

KS 553:2004 Lemon fruit juice preserved exclusively by physical means - Specification

KS 556:2004 Pineapple fruit juice preserved exclusively by physical means - Specification

KS 406:2004 Passion fruit juice preserved exclusively by physical means - Specification

KS 407:2004 Orange fruit juice preserved exclusively by physical means - Specification

KS 552:2008 Grapefruit juice preserved exclusively by physical means - Specification

KS 1179:1996 Apple fruit juice preserved exclusively by physical means - Specification

KS CODEX STAN 83:1981 Specification for concentrated grape juice

preserved exclusively by physical means

KS CODEX STAN 247:2005 Codex general standards for fruit juices and

nectars

KS CAC/GL 12:1991 Guidelines for mixed fruit nectars

KS CAC/GL 11:1991 Guidelines for mixed fruit juices KS 554:2004 Apple fruit juice preserved exclusively by

physical means - Specification

KS 404:1984 Specification for mango juice preserved exclusively by physical means

KS 557:1985 Specification for guava nectar preserved exclusively by physical means

KS 555:1985 Specification for grape juice preserved exclusively by physical means

KS 405-3:1993 Specification for fruit nectars preserved exclusively by physical means - Part 3: Specification for passion fruit nectar

KS405-1&2:1984 Specification for fruit nectars preserved exclusively by physical means Part I: Mango nectar Part 2: Nectars of certain citrus fruits

KS CODEX STAN 64:1981 Specification for concentrated orange juice

preserved exclusively by physical means, all the above numbers 145 to 161 to be replaced by KS 2640:2016 FruIts and Nectars -

Specification KS 1552:2000 Code of Hygienic Practice for Production,

Handling and Distribution of milk and milk products to be replaced by KS 1552:2016

KS 1095:2011 Food seasoning mixtures - Specification to be replaced by KS 1095:2016

KS EAS 28:2000 Black Tea - Specification to be replaced by KS 65: 2013

KS ISO 6079:1990 Instant tea in solid form - Specification to be replaced by KS 2405:2015

KS ISO 4052:1983 Coffee - Determination of caffeine content to be replaced by KS ISO 20481:2008

KS ISO 7532:1985 Specification for instant coffee - Size analysis, Withdrawn December 2013, no replacement

KS 593:2011 Green coffee bean specification to be replaced by KS EAS130:1999

KS EAS 478-2:2008 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) Part 2: Technique using rabbit plasma fibrinogen agar medium to be replaced by KS ISO 6888-2:1999

KS EAS 478-3:2008 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) Part 3: Detection and MPN technique for low numbers to be replaced by KS ISO 6888-3:2003

KS 220-1:1979 Methods for microbiological examination of foods - General procedures and techniques to be replaced by KS ISO 7218:2007

KS 220-2:1979 Methods for the microbiological examination of foods Part 2: General guidance for the enumeration of micro- organisms Colony count technique at 30 degrees C to be replaced by KS ISO 4833:2003

KS 220-3:1979 Methods for the microbiological examination of foods Part 3: General guidance for enumeration of coliforms -

Colony count technique at 30° C to be replaced by KS ISO 4832:2006

KS 220-4:1981 Methods for the microbiological examination of foods Part 4: General guidance for the enumeration of coliforms -

Most probable number technique at 30°C to be replaced by KS ISO 4831:2006

KS 220-5:1981 Methods for the microbiological examination of foods Part 5: Enumeration of coagulase - Positive staphylococci to be replaced by KS ISO 6888-2:1999, KS ISO 6888-3:2003, KS ISO 6888-1:1999

KS 220-6:1981 Methods for microbiological examination of food Part 6: Examination for salmonellae to be replaced by KS ISO 67885:2001 KS ISO 6579:2002, KS ISO 6579:2002/Cor 1:2004, KS ISO 6579:2002/Amd 1:2007

KS 220-8:1994 Methods for the microbiological examination of foods Part 8: Enumeration of yeasts and mould in food to be replaced by KS ISO 21527-1:2008, KS 150 21527-2: 2008

KS ISO 7937:1985 Methods for the microbiological examination of food and animal feeding stuffs. Enumeration of Clostridium Perfrigens to be replaced by KS ISO 7937:2004

KS ISO 13904:2005 Animal feeds stuffs - Determination of tryptophan content to be replaced by KS ISO 13904:2016

KS EAS 478-2:2008 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) Part 2: Technique using rabbit plasma to be replaced by KS ISO 6888-2:1999

KS EAS 478-3:2008 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) Part 3: Detection and MPN technique to be replaced by KS ISO 6888-3:2003

KS 2356:20 12 Bio fertilizers - Specification, to be replaced by KS 2356:2016

KS 1690:2010 Roek phosphate fertilizers - Specification, to be replaced by KS 1690:2016

2936 THE KENYA GAZETTE 17th August, 2018

KS 2260:2010 Natural calcium phosphate for manufacture of fertilizer - Specification, to be replaced by KS 2260:2016

KS 2261:2010 Single superphosphate fertilizer (powder) - Specification, to be replaced by KS 2261:2016

KS ISO 8157:1984 Fertilizers and soil conditions - Vocabulary, to be replaced by KS ISO 8157:2015

KS IEC 60666:1979 Detection and determination of specified anti-oxidant additives in insulating oils. To be replaced by KS IEC 60666:2010

KS fEC 61039:1990 General classification of insulating liquids. To be replaced by KS fEC 61039:2008

KS IEC 61109:1992 Composite insulators fora.c. overhead lines with a nominal voltage greater than 100 v-Definitions, test methods and acceptance criteria To be replaced by KS IEC 61109:2008

KS IEC 60502-2:2005 Power cables with extruded insulation and their accessories for rated voltages from 1kV (urn = 1,2 kV) up to 30 kV (Urn = 36 kV) - Part 2: Cables for rated voltages of 6 kV (Urn = 7,2 kV) up to 30 kV ( Um = 36 kV). To be replaced by KS fEC 60502-2:20 14

KS LEC 60502-4:2005 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (urn = 1,2 kV) up to 30 kV (Urn = 36 kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (Urn = 7,2 kV) up to 30 kV ( Urn = 36 kV). To be replaced by KS IEC 60502-4:2010.

KS 312-1:1985 Low-voltage motor starters Part 1: Direct on-line (full voltage) ac. starters; to be replaced by KS IEC 60947-4-1:2009 + AMD1:2012 CSV

KS IEC 61439-3:2001 Low-voltage switchgear and control gear assemblies - Part 3: Particular requirements for low-voltage switchgear and control gear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards; to be replaced with KS IEC 61439-3:2012

KS IEC 61439-4:2010 Low-voltage switchgear and control assemblies Part 4: Particular requirements for assemblies for construction sites (ACS); to be replaced with KS IEC 61439-4:2012

KS IEC 61439-5:2001 Low-voltage switchgear and control gear assemblies Part 5: Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCS) for power distribution in networks; to be replaced with KS fEC 61439-5:2014

KS 1673-2-1:2003 Generic specification for solar photovoltaic systems - System design, installation, monitoring and maintenance Part 2: Test procedures for main components - Section 1 Test procedures for photovoltaic modules; to be replaced with KS fEC 61215:2005 and KS IEC 61646:2008

KS 1673-2-4:2003 Generic specification for solar photovoltaic systems - System design, installation, monitoring and maintenance Part 2: Test procedures for main components - Section 4: Test procedures for inverters; to be replaced with KS fEC 62109:2:2011

KS 1678-1:2003 Photovoltaic devices Part 1: Measurement of photovoltaic current-voltage characteristics; to be replaced with KS IEC 60904-1:2006

KS 1678-2:2003 Photovoltaic devices Part 2: Requirements for reference solar cells; to be replace with KS IEC 60904-2:2007

KS 1678-6:2003 Photovoltaic devices Part 6: Requirements for reference solar modules; to be replaced with KS fEC 60904-2:2007

KS 1678-7:2003 Photovoltaic devices Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device; to be replaced with KS IEC 60904-7:2008

KS 1678-8:2003 Photovoltaic devices Part 8: Measurement of spectral response of a photovoltaic (PV) device; to be replaced with KS IEC 60904- 8:2014

KS 1686:2003, Analytical expression for daily solar profiles; to be replaced with KS LEC 61725:1997

KS 1688:2003, crystalline silicon photovoltaic (PV) array -

On-site measurement of I-V characteristics; to be replaced with KS fEC 61829:2015

KS EAS 363-4:2005 Solar photovoltaic power systems - Test procedures for main components Part 4: Test procedures for inverters, to be replaced with KS fEC 62109-2:2011

KS EAS 366:2005 Characteristic parameters of standalone photovoltaic (PV) systems, to be replaced with KS IEC 62 124:2004

KS EAS 363-5:2005 Solar photovoltaic power systems - Test procedures for main components Part 5: Test procedures for lumihaires, to be replaced with KS LEC 60924 and KS IEC 60925

KS EAS 389-3:2006 Solar photovoltaic power systems - Design, installation, operation, monitoring and maintenance - Code of practice Part 3: Operation of PV systems. Withdrawn with no replacement

KS EAS 362:2005 Solar photovoltaic power systems -

Glossary, to be replaced with KS IEC /TS 61836:2007

KS EAS 365:2005 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval. Replaced by KS IEC 61646:2008

KS EAS 364:2005 Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval. Replaced by KS LEC 612 15: 2005

KS EAS 167:2000 Tungsten lamps for general lighting service - Specification. Replaced with KS fEC 60064:1993

KS EAS 519-11:2008 Stationary lead-acid batteries Part 11: Vented types - General requirements and methods of test. Replaced with KS fEC 60896-11:2002

KS EAS 519-21:2008 Stationary lead-acid batteries Part 21: Valve regulated types - Methods of test. Replaced with KS IEC 60896-21:2004

KS EAS 5 19-22:2008 Stationary lead-acid batteries Part 22: Valve regulated types - Requirements. Replaced with KS fEC 60896-22:2004

KS fEC 60947-4-3:2001 Specification for low-voltage switchgear and control gear Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads. To be replaced by KS fEC 60947-4-3:2014

KS IEC 60947-4-2:200 1 Specification for low-voltage switchgear and control gear Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters To be replaced by KS IEC 60947-4-2:2011

KS EAS 136:2007 Electric cables - Terminology. To be replaced by KS IEC 60050-461:2008

KS EAS 204-2: 2001 Metallic conduits and fittings for electrical installation - Specification Part 2: Fittings To be replaced by KS fEC 6 1386-24: 2004

17th August, 2018 THE KENYA GAZETFE 2937

KS 416:2000 Specification for knitted polyester fabric To be replaced by KS EAS 220:2001

KS 417:2000 Specification for polyester/cellulosic blended fabric To be replaced by KS EAS 222:2001

KS 419:1983 Specification for knitted cotton fabric To be replaced by KS EAS 227:200 1

KS 119:1981 Method for determination of breaking load and elongation (strip method) of woven fabrics, replaced by KS ISO 13934-1:2013

KS EAS 238:200 1 Textile materials - Tests for colour fastness -

Colour fastness to perspiration, replaced by KS ISO 105-E04:2013

KS EAS 254:2007 Textiles - Tear properties of fabrics -

Determination of tear resistance by falling pendulum (Elmendorf) apparatus, replaced by KS ISO 13937-1:2000

KS ISO/IEC 11770-3:2008 Information technology -- Security

techniques - Key management Part 3: Mechanisms using asymmetric techniques replaced by KS ISO/IEC 11770-3:2015

KS ISO/IEC 27033-1:2009 Information technology - Security

techniques - Network security Part 1: Overview and concepts replaced by KS ISO/IEC 27033-1:2015

KS ISO/IEC 27013:2012 Information technology - Security techniques - Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 2-1,replaced by KS ISO/IEC 27013:20 15

KS ISOIIEC 27010:2012 Information technology - Security techniques - Information security management for inter-sector and inter- organizational communications, replaced by KS ISO/IEC 27010:2015

KS ISO/IEC 27006:2011 Information technology - Security techniques - Requirements for bodies providing audit and certification of information security management, replaced by KS ISO/IEC 27006:2015

KS 507:2005 Sanitary towels - Specification to be replaced by KS EAS 96:2008

KS 1734:2003 Specification for dividers for mathematical sets to be replaced by KS 1734:2016

KS 2217-6:2010 Kenya Standard - Glossary of terms used in the education sector Part 6: University education, to be replaced by KS 2217- 6:20 16

Dated the 26th August, 2016. CHARLES ONGWAE,

MR/5 159546 Secretary, National Standards Council.

GAZETFE NOTICE No. 8456

THE STANDARDS ACT

(Cap. 496)

DECLARATION OF KENYA STANDARDS

PURSUANT to section 9 (1) of the Standards Act, the National Standards Council declares the specifications or codes of practice appearing in the schedule hereto to be Kenya Standards with effect from the date of publication of this notice.

Number Title of Specfi cation or Code of Practice

Chemical

KS 1941-1:2018 Kenya Standard - Scouring compounds - Specification Part 1: Dishwashing paste, Second Edition

KS 1941-2:2018 Kenya Standard - Scouring compounds - Specification Part 2: Antibacterial dishwashing paste, Second Edition

Chemical

KS EAS 848:2016 Kenya Standard - Water-thinned priming paints for wood - Specification, First Edition

KS EAS 849:2016 Kenya Standard - Silk (sheen) emulsion paint for interior use - Specification, First Edition

KS EAS 850:2016 Kenya Standard - Matt solvent-borne paint for interior and exterior use - Specification, First Edition

KS EAS 851:2016 Kenya Standard - Matt emulsion paint for interior and exterior use - Specification, First Edition

KS EAS 852:2016 Kenya Standard - Air-dried roofing paint - Specification, First Edition

KS EAS 853-1:2016 Kenya Standard - Auto-refinishing paint - Specification Part 1: Synthetic resin based, First Edition

KS EAS 853-2:2016 Kenya Standard - Auto refinishing paint - Specification Part 2: Nitrocellulose resin based, First Edition

KS EAS 854:2016 Kenya Standard - Thinner for nitrocellulose resin-based paints and lacquers - Specification, First Edition

KS EAS 855:2016 Kenya Standard - Thinner for synthetic resin-based auto-refinishing paints - Specification, First Edition

KS EAS 856:2016 Kenya Standard - Pack acrylic resin-based auto-refinishing paint - Specification, First Edition

KS EAS 857:2016 Kenya Standard - Thinner for acrylic resin based auto-refinishing paints -

Specification, First Edition

KS 2157-1:2018 Kenya Standard - Hot applied thermoplastic road marking pai -

Specification Part 1: Constituent material and mixtures, Second Edition

KS 2 157-2:2018 Kenya Standard - Hot applied Thermoplastic Road Marking paint - Specification Part 2: Specification for road performance, Second Edition

KS 421:2018 Kenya Standard - Newsprint - Specification, Third Edition

KS 921:2018 Kenya Standard - Kraft liner - Specification, Second Edition

KS ISO 14644-1:2015 Kenya Standard - Clean rooms and associated controlled environments Part 1: Classification of air cleanliness by particle concentration, First Edition

Electrotechnical

KS 2720:2016 Amd 1:2018 Kenya Standard - Nonwoven disposable

wet wipes - Specification, AMENDMENT 1, First Edition

KS ISO 11948:1996 Kenya Standard - Urine absorbing aids Part 1: Whole product testing, First Edition

KS 2757:2018 Kenya Standard - Fabric fashion hand bag - Specification, First Edition

KS 1062:2018 Kenya Standard - Infant Outer wear garments - Specification, Second Edition

KS 214-1:2018 Kenya Standard - Woven interlinings for apparel purposes - Specification Part 1: Woven interlinings, Second Edition

2938

KS 214-2:2018

Kenya Standard - Woven linings for apparel purposes - Specification Part 2: Woven linings, Second Edition

KS 2758:2018

Kenya Standard - Reusable nappy liners - Specification, First Edition

KS 1620: 2018

Kenya Standard - Bathroom slippers - Specification, Fourth Edition

KS 1943:2018

Kenya Standard - Light duty canvas shoes - Specification, Second Edition

KS 2777:2018

Kenya Standard -- Sports balls - Volleyballs - Specification, First Edition

KS 2771:2018

Kenya Standard - Aluminium binding wire for electrical purposes - Specification, First Edition

KS EEC 61557-1:2007

Kenya Standard - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 1: General requirements, Second Edition

KS IEC 61557-2:2007

Kenya Standard - Electrical safety in low voltage distribution systems up to 1 000 V ac. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 2: Insulation resistance, Second Edition

KS EEC 61557-3:2007

Kenya Standard - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 3: Loop impedance, Second Edition

KS EEC 61557-4:2007

Kenya Standard -. Electrical safety in low voltage distribution systems up to 1 000 V ac. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 4: Resistance of earth connection and equipotential bonding, Second Edition

KS EEC 61557-5:2007 Kenya Standard - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 5: Resistance to earth, Second Edition

KS EEC 61557-6:2007 Kenya Standard - Electrical safety in low voltage distribution systems up to I 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 6: Effectiveness of residual current devices (RCD) in iT, TN and IT systems, Second Edition

KS IEC 61557-7:2007 Kenya Standard - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 7: Phase sequence, Second Edition

KS EEC 61557-8:2014 Kenya Standard - Electrical safety in low voltage distribution systems up to 1 000 V ac. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 8; Insulation monitoring devices for IT systems, Second Edition

KS EEC 61557-9:20 14 Kenya Standard - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 9: Equipment for insulation fault location in IT systems, Second Edition

KS EEC 61557-10:2013 Kenya Standard - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures, Second Edition

KS EEC 60287-1-1:2006 Kenya Standard - Electric cables Calculation of the current rating Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General, First Edition

KS EEC 60287-2-1:2006 Kenya Standard - Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance, First Edition

KS EEC 60287-2-2:1995 Kenya Standard Electric cables - Calculation of the current rating Part 2: Thermal resistance - Section 2: A method for calculating reduction factors for groups of cables in free air, protected from solar radiation, First Edition

KS ISO 4190-1:2010 Kenya Standard - Lift (elevator) installation Part 1: Class I, II, Ill and VI lifts, Second Edition

KS ISO 4190-5:2006 Kenya Standard - Lift (elevator) installation Part 5: Control devices, signals and additional fittings, Second Edition

KS EEC 60984:2014 Kenya Standard - Live, working - Electrical insulating sleeves, First Edition

KS LAS 811-1: 2014 Kenya Standard - Code of practice for safety of electrical installations Part 1: General, First Edition

KS LAS 811-2: 2014 Kenya Standard - Code of practice for safety of electrical installation Part 2: Installation and maintenance of electric supply stations and equipment, First Edition

KS LAS 811-3: 2014 Kenya Standard - Code of practice for safety of electrical installations Part 3: Installation and maintenance of overhead electric supply and communication lines, First EditIon

KS LAS 811-4:2014 Kenya Standard - Code of practice for safety of electrical installations Part 4: Installation and maintenance of underground electric supply and communication lines, First Edition

KS LAS 811-5: 2014 Kenya Standard - Code of practice for safety of electrical installations Part 5: Operation of electric supply lines, communication lines and equipment, First Edition

KS EAS 111:1999 Kenya Standard - Aluminium conductors (AAC) for overhead power transmission - Specification, First Edition

KS EAS 112: 1999 Kenya Standard - Aluminium conductors, galvanized steel reinforced (ACSR) for overhead power transmission - Specification, First Edition

KS LAS 137-2:2000 Kenya Standard - PVC insulations and sheaths of electric cables and cords Part 2: Methods of measurement of thickness and overall dimensions and determination of the mechanical properties, First Edition

KS LAS 137-3:2000 Kenya Standard - PVC insulations and sheaths of electric cables and cords - Specification Pan 3: Thennai-ageiag methods, First Edition

THE KENYA GAZETFE

17th August, 2018

17th August, 2018 THE KENYA GAZETTE 2939

KS ISO 25745-2:2015 Kenya Standard - Energy performance of lifts, escalators and moving walks Part 2: Energy calculation and classification for lifts (elevators), First Edition

KS ISO 25745-3:2015 Kenya Standard - Energy performance of lifts, escalators and moving walks Part 3: Energy calculation and classification of escalators and moving walks, First Edition

KS IECITR 61334-1-1:1995 Kenya Standard - Distribution automation

using distribution line carrier systems Part 1: General considerations - Section 1: Distribution automation system architecture, First Edition

KS IECITR 61334-1-2:1997 Kenya Standard - Distribution automation

using distribution line carrier systems Part 1-2. .jcnera1 considerations - Guide for specification, First Edition

KS IEC 1k 61334-1-4:1995 Kenya Standard - Distribution automation

using distribution line carier systems Part 1: General considerations - Section 4: Identification of data transmission parameters concerning medium and low- voltage distribution mains, First Edition

KS IEC 61334-3-1:1998 Kenya Standard - Distribution automation using distribution line carrier systems Part 3-1: Mains signalling requirements - Frequency bands and output levels, First Edition

KS IEC 61334-3-21:1996 Kenya Standard -. Distribution automation using distribution line carrier systems Part

Mains signalling requirements - Section 21: MV phase-to-phase isolated capacitive coupling device, First Edition

KS IEC 61334-3-22:2001 Kenya Standard - Distribution automation using distribution line carrier systems Part 3.22: Mains signalling requirements - MV phase-to-earth and screen-to-earth intrusive coupling devices, First Edition

KS IEC 613344-1:1996 Kenya Standard - Distribution automation using distribution line carrier systems Part

Data communication protocols - Section 1: Reference model of the communication system, First Edition

KS IEC 61334-4-32:1996 Kenya Standard - Distribution automation using distribution line carner systems Part 4: Data communication protocols - Section 1: Reference model of the communication system, First Edition

KS IEC 61334-4-33:1998 Kenya Standard - Distribution automation using distribution line carrier systems Part 4-33: Data communication protocols - Data link layer - Connection oriented protocol, First Edition

KS IEC 613344-41:1996 Kenya Standard - Distribution automation using distribution line carrier systems Part 4: Data communication protocols - Section 41: Application protocol - Distribution line message specification, First Edition

KS IEC 61334-4-42:1996 Kenya Standard - Distribution automation using distribution line carrier systems Part 4: Data communication protocols - Section 42: Application protocols Application layer, First Edition

KS JEC 61334-5-1:2001 Kenya Standard - Distribution automation using distribution line carrier systems Part 5-1: Lower layer profiles - The spread frequency shift keying (S-FSK) profile, First Edition

KS IEC 61334-4-511:2000

Kenya Standard - Distribution automation using distribution line carrier systems Part 4-5 11: Data communication protocols - Systems management - CIASE protocol, First Edition

KS IEC 61334-4-512:2001

Kenya Standard - Distribution automation using distribution line carrier systems Pail 4-512: Data communication protocols - System management using profile 61334-5-

- Management Information Base (MIB), First Edition

KS IEC/TS 61334-5-2:1998

Kenya Standard - Distribution automation using distribution line carrier systems Part 5-2: Lower layer profiles - Frequency shift keying (FSK) profile, First Edition

KS IEC/TS 61334-5-3:2001

Kenya Standard - Distribution automation using distribution line carrier systems Part 5-3: Lower-layer profiles - Spread spectrum adaptive wideband (SS-AW) profile, First Edition

KS IEC/TS 61334-5-4:2001

Kenya Standard - Distribution automation using distribution line carrier systems Part 5-4: Lower layer profiles - Multi-carrier modulation (MCM) profile, First Edition

KS IECI'TS 61334-5-5:2001

Kenya Standard - Distribution automation using distribution line carrier systems Part 5-5: Lower layer profiles - Spread spectrum -- Fast frequency hopping (SS-FFH) profile, First Edition

KS IEC 61334-6:2000 Kenya Standard - Distribution automation using distribution line carrier systems Part 6: A-XDR encoding rule, First Edition

KS IEC 61334-4-61:1998 Kenya Standard - Distribution automation using distribution line carrier systems Part 4-61: Data communication protocols - Network layer - Connectionless protocol, First Edition

KS JEC 60870-5-2:1992 Kenya Standard - Telecontrol equipment and systems Part 5: Transmission protocols - Section 2: Link transmission procedures. First Edition

KS IEC 60870-5-3:1992 Kenya Standard -- Telecontrol equipment and systems Part 5: Transmission protocols - Section 3: General structure of application data. First Edition

KS IEC 60870-5-4:1993 Kenya Standard - Telecontrol equipment and systems Part 5: Transmission protocols - Section 4: Definition and coding of application information elements, First Edition

KS IEC 60870-5-5:1995 Kenya Standard - Telecontml equipment and systems Part 5: Transmission protocols - Section 5: Basic application functions, First Edition

KS IEC 60870-5-6:2006 Kenya Standard - Telecontrol equipment and systems Part 5-6: Guidelines for conformance testing for the IEC 60870-5 companion standards, First Edition

KS IECftS 60870-5-7:2013 Kenya Standard - Telecontrol equipment

sad systems Part 5-7: Transmission protocols - Security extensions to IEC 60870-5-101 and IEC 60870-5-104 protocols (applying JEC 62351). First Edition

2940 THE KENYA GAZEUE 17th August, 2018

KS IEC 60870-6-702: 2014

KS IEC 60870-6-802: 2014

KS ISO 20875-1:2012

KS ISO 20785-2:2011

KS ISO 20785-3:20 15

KS IEC 62209-1:2016

KS IEC 62209-2:2010

KS IEC 60870-5-101:2003 Amd 1:2015

KS IEC 60870-5-102:1996

KS IEC 60870-5-103:1997

KS IEC 60870-5-104:2006 Amd 1:2016

KS IECITR 60870-6-1:1995

KS IEC/TR 60870-6-501: 1995

KS !EC/TR 60870-6-502:1995

KS IECITR 60870-6-503:2014

KS IECITS 60870-6-504:1998

KS IEC 60870-6-601: 1994

KS fEC 60870-6-701: 1998

Kenya Standard - Telecontrol equipment and systems Part 5-101: Transmission protocols - Companion standard for basic telecontrol tasks, First Edition

Kenya Standard - Telecontrol equipment and systems Part 5: Transmission protocols

Section 102: Companion standard for the transmission of integrated totals in electric power systems, First Edition

Kenya Standard - Telecontrol equipment and systems Part 5-103: Transmission protocols - Companion standard for the informative interface of protection equipment, First Edition

Kenya Standard - Telecontrol equipment and systems Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles, First Edition

Kenya 'Standard - Telecontrol equipment and systems Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 1: Application context and organization of standards, First Edition

Kenya Standard - Telecontrol equipment and systems Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 501: TASE.1 Service definitions, First Edition

Kenya Standard - Telecontrol equipment and systems Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 502: TASE.1 Protocol definitions, First Edition

Kenya Standard - Telecontrol equipment and systems Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Services and protocol, First Edition

Kenya Standard - Telecontrol equipment and systems Part 6-504: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.1 User conventions, First Edition

Kenya Standard - Telecontrol equipment and systems Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 601: Functional profile for providing the connection-oriented transport service in an end system connected via permanent access to a packet switched data network, First Edition

Kenya Standard - Telecontrol equipment and systems Part 6-701: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.1 application service in end systems, First Edition

Kenya Standard - Telecontrol equipment and systems Part 6-702: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.2 application service in end systems, First Edition

Kenya Standard - Telecontrol equipment and systems Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object models, First Edition

Kenya Standard - Dosimetry for exposures to cosmic radiation in civilian aircraft Part

Conceptual basis for measurements, First Edition

Kenya Standard - Dosimetry for exposures to cosmic radiatiol3 in civilian aircraft Part

Characterization of instrument response, First Edition

Kenya Standard - Dosimetry for exposures to cosmic radiation in civilian aircraft Part

Measurements at aviation altitudes, First Edition

Kenya Standard - Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz), Second Edition

Kenya Standard - Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz), First Edition

KS OIMLR 117-1:2007 Kenya Standard - Dynamic measuring systems for liquids other than water Part 1: Metrological and technical requirements, Second Edition

KS OIML R 117-2:2014 Kenya Standard - Dynamic measuring systems for liquids other than Water-Part 2: Metrological controls and performance tests, Second Edition

KS OIML R 117-3:2014 Kenya Standard - Dynamic measuring systems for liquids other than water Part 3: Test report format, Second Edition

KS ISOIIEC 15504-4:2004 Kenya Standard - Information technology

- Process assessment Part 4: Guidance on use for process improvement and process capability determination, First Edition

KS ISOIIEC 15504-5:20 12 Kenya Standard - Information technology

- Process assessment Part 5: An exemplar software life cycle process assessment model, First Edition

KS ISO/LEC 15504-6:20 13 Kenya Standard - Information technology

- Process assessment Part 6: An exemplar system life cycle process assessment model, First Edition

KS ISOIIEC 33001:2014 Kenya Standard - Information technology - Process assessment - Concepts and terminology, First Edition

17th August, 2018 THE KENYA GAZETTE 2941

KS ISO/IEC 33002:2015 Kenya Standard - Information technology - Process assessment Requirements for performing process assessment, First Edition

KS ISOIIEC TS 33030:20 17 Kenya Standard - Information technology

- Process assessment - An exemplar documented assessment process, First Edition

KS ISO/IEC TS 15504-8:2012 Kenya Standard - Information technology

- Process assessment Part 8: An exemplar process assessment model for IT service management, First Edition

KS ISO/IEC 15504-9:2011 Kenya Standard - Information technology

- Process assessment Part 6: An exemplar system life cycle process assessment model, First Edition

KS ISO/IEC 15504-10:2011 Kenya Standard - Information technology - Process assessment Part 10: Safety extension, First Edition

KS ISO 21500:2012, Guidance on project management, First Edition

KS ISO 19101-1:2014 Kenya Standard - Geographic information - Reference model Part 1: Fundamentals, First Edition

KS ISO 19101-2:2008 Kenya Standard - Geographic information Part 2: Imagery, First Edition

KS ISO

19108:2002/Cor 1:2006 Kenya Standard - Geographic information - Temporal schema, First Edition

KS ISO 19109:2015 Kenya Standard - Geographic information - Rules for application schema, Second Edition

KS ISO 19110:2016 Kenya Standard - Geographic information - Methodology for feature cataloguing, Second Edition

KS ISO 19111:2007 Kenya Standard - Geographic information - Spatial referencing by coordinates, Second Edition

KS ISO 19111-2:2009 Kenya Standard - Geographic information - Geographic information - Spatial referencing by coordinates Part 2: Extension for parametric values, First Edition

KS ISO 19157:2013 Kenya Standard - Geographic information - Data quality, First Edition

KS ISO 19115-1:2014 Geographic information - Metadata Part 1: Fundamentals, First Edition

KS ISO 19115-2:2009 Kenya Standard - Geographic information - Metadata Part 2: Extensions for imagery and gridded data, First Edition

KS ISO/TS 19115-3:2016 Kenya Standard - Geographic information - Metadata Part 3: XML schema implementation for fundamental concepts, First Edition

KS ISO/IEC 18328-3:2016 Kenya Standard - Identification cards -

ICC-managed devices Part 3: Organization, security and commands for interchange, First Edition

KS ISOIIEC 18745-2:2016 Kenya Standard - Information technology

- Test methods for machine readable travel documents (MRTD) and associated devices Part 2: Test methods for the contactless interface, First Edition

KS ISO/IEC 18013-3:2017 Kenya Standard - Information technology

- Personal identification - ISO-compliant driving licence Part 3: Access control, authentication and integrity validation, Second Edition

KS ISO/IEC TR 30125:2016 Kenya Standard - Information technology

-- Biometrics used with mobile devices, First Edition

KS ISO/LEC 24779-4:20 17 Kenya Standard - Information technology

- Cross jurisdictional and societal aspects of implementation of biometric technologies - Pictograms, icons and symbols for use with biometric systems Part 4: Fingerprint applications, First Edition

KS ISOIIEC 10116:2017 Kenya Standard - Information technology - Security techniques - Modes of operation for an n-bit block cipher, Second Edition

KS ISO/IEC 29134:2017 Kenya Standard - Information technology - Security techniques - Guidelines for privacy impact assessment, First Edition

KS ISO/IEC 18384-1:2016 Kenya Standard - Information technology

- Reference Architecture for Service Oriented Architecture (SOA RA) Part 1: Terminology and concepts for SOA, First Edition

KS ISO/IEC 18384-2:20 1 Kenya Standard - Information technology

- Reference Architecture for Service Oriented Architecture (SOA RA) Part 2: Reference Architecture for SOA Solutions, First Edition

KS ISO/IEC 18384-3:2016 Kenya Standard - Information technology

- Reference Architecture for Service Oriented Architecture (SOA RA) Part 3: Service Oriented Architecture ontology, First Edition

KS ISO/IEC 19086-1:2016 Kenya Standard - Information technology

- Cloud computing - Service level agreement (SLA) framework Part 1: Overview and concepts, First Edition

KS ISOIIEC 19086-3:2017 Kenya Standard - Information technology

- Cloud computing - Service level agreement (SLA) framework Part 3: Core conformance requirements, First Edition

KS ISO/IEC 20933:20 16 Kenya Standard - Information technology - Distributed Application Platforms and Services (DAPS) - Access Systems, First Edition

KS ISO/IEC 10118-1:2016 Kenya Standard - Information technology

- Security techniques - Hash-functions Part 1: General, Second Edition

KS ISO/IEC 11770-6:2016 Kenya Standard - Information technology

- Security techniques - Key management Part 6: Key derivation, First Edition

KS ISOIIEC 18370-1 :20 16 Kenya Standard - Information technology

- Security techniques - Blind digital signatures Part 1: General, First Edition

KS ISOIIEC 19592-1 :20 16 Kenya Standard - Information technology

- Security techniques - Secret sharing Part 1: General, First Edition

2942 THE KENYA GAZETFE 17th August, 2018

KS ISOIIEC 24159:2017 Kenya Standard - Information technology - Security techniques - Test requirements for cryptographic modules, Second Edition

KS ISO/IEC 10741-1:1995 Kenya Standard - User system interfaces

- Dialogue interaction Part 1: Cursor control for text editing, First Edition

KS ISO/IEC 30113-1:2015 Kenya Standard - User interface -

Gesture-based interfaces across devices and methods Part 1: Framework, First Edition

KS ISO/IEC 17549-2:20 15 Kenya Standard - Infonnation technology

- User interface guidelines on menu navigation Part 2: Navigation with 4- direction devices, First Edition

KS ISOIIEC 18021:2002 Kenya Standard -. Information technology -- User interfaces for mobile tools for management of database communications in a client-server model, Edition 1

KS ISOIIEC TR 11580:2007 Kenya Standard - Information technology

- Framework for describing user interface objects, actions and attributes, First Edition

KS ISOIIEC 'FR 19765:2007 Kenya Standard - Survey of icons and

symbols that provide access to functions and facilities to improve the use of information technology products by the elderly and persons with disabilities, First Edition

KS ISO/IEC 'FR 19766:2007 Kenya Standard - Guidelines for the

design of icons and symbols accessible to all users, including the elderly and persons with disabilities, First Edition

KS ISO/IEC 18035:2003 Kenya Standard - Icon symbols and functions for controlling multimedia software applications, First Edition

KS ISO/IEC 18036:2003 Kenya Standard - Icon symbols and functions for World Wide Web browser toolbars, First Edition

KS ISO/IEC 15141-1:2000 Kenya Standard - User system interfaces

and symbols -- Icon symbols and functions Part 1: Icons - General, First Edition

KSISO/IEC TR 11581-1:2011 Kenya Standard - User interface icons Part

1: Introduction to and overview of icon standards, First Edition

KS ISO/JEC 11581-2:2000 Kenya Standard - User system interfaces

and symbols -- Icon symbols and functions Part 2: Object icons, First Edition

KS ISO/IEC 11581-3:2000 Kenya Standard - User system interfaces

and symbols Icon symbols and functions Part 3: Pointer icons, First Edition

KS ISO/IEC 11581-5:2004 Kenya Standard - User system interfaces

and symbols -- Icon symbols and functions PartS: Tool icons, First Edition

KS ISO/IEC 11581-6:1999 Kenya Standard - User system interfaces

and symbols - Icon symbols and functions Part 6: Action icons, First Edition

KS ISO/IEC 11581-102010 KenyaStandard - UacrinterfaceiconsPart

10: Framework and general guidance, First Edition

KS ISO/IEC 11581-40:2011 Kenya Standard - User interface icons Part

40: Management of icon registration, First Edition

KS ISO/IEC 24738:2006 Kenya Standard - Icon symbols and functions for multimedia link attributes, First Edition

KS !SO/IEC 14755:1997 Kenya Standard - Input methods to enter characters from the repertoire of ISOIIEC 10646 with a keyboard or other input device, First Edition

KS ISO/IEC 15411:1999 Kenya Standard - Segmented keyboard layouts, First Edition

KS ISO/IEC 15412:1999 Kenya Standard - Portable computer keyboard layouts, First Edition

KS ISO/IEC TR 15440:2016 Kenya Standard - Future keyboards and

other input devices and entry methods, First Edition

KS ISO/IEC 9995-1:2009 Kenya Standard - Keyboard layouts for text and office systems Part 1: General principles governing keyboard layouts, Second Edition

KS ISO/IEC 9995-2:2009 Kenya Standard - Keyboard layouts for text and office systems Part 2: Alphanumeric section, Second Edition

KS ISO/IEC 9995-3:2010 Kenya Standard - Keyboard layouts for text and office systems Part 3: Complementary layouts of the alphanumeric zone of the alphanumeric section, Edition 2

KS ISO/IEC 9995-4:2009 Kenya Standard - Keyboard layouts for text and office systems Part 4: Numeric section, Second Edition

KS ISOIIEC 9995-5:2009 Kenya Standard - Keyboard layouts for text and office systems -- Part 5: Editing and function section, Second Edition

ISO/LEC 9995-7:2009 Kenya Standard - Keyboard layouts for text and office systems Part 7: Symbols used to represent functions, Edition 2

1S0/IEC 9995-8:2009 Kenya Standard - Keyboard layouts for text and office systems Part 8: Allocation of letters to the keys of a numeric keypad, Second Edition

KS ISO/IEC 9995-9:20 16 Kenya Standard - Keyboard layouts for text and office systems Part 9: Multi-lingual, multiscript keyboard layouts, First Edition

KS ISO/IEC 9995-10:2013 Kenya Standard - Keyboard layouts for text and office systems Part 10: Conventional symbols and methods to represent graphic characters not uniquely recognizable by their glyph on keyboards and in documentation, First Edition

KS ISOIIEC 9995-11:2015 Kenya Standard - Keyboard layouts for office systems -- Part 11: Functionality of dead keys and repertoires of characters entered by dead keys, First Edition

KS ISO/IEC 24757:2008 Kenya Standard - Keyboard interaction model - Machine-readable keyboard description, First Edition

Engineering

KS ISO 4254-14:2016 Kenya Standard - Agricultural machinery safety Part 14: Bale wrappers, First Edition

KS ISO 57 18:2013 Kenya Standard - Harvesting equipment - Blades for agricultural rotary mowers --Requirements, First Edition

17th August, 2018 THE KENYA GAZETTE 2943

KS ISO 17101-1:2012 Kenya Standard - Agricultural machinery - Thrown-object test and acceptance criteria Part 1: Rotary mowers, First Edition

KS ISO 17101-2:2012 Kenya Standard - Agricultural machinery - Thrown-object test and acceptance criteria Part 2: Flail mowers, First Edition

KS ISO 5682-1:2017 Kenya Standard - Equipment for crop protection - Spraying equipment Part 1: Test methods for sprayer nozzles, First Edition

KS ISO 5682-2:20 17 Kenya Standard - Equipment for crop protection - Spraying equipment Part 2: Test methods to assess the horizontal transverse distribution for hydraulic sprayers, First Edition

KS ISO 5682-3:20 17 Kenya Standard - Equipment for crop protection - Spraying equipment Part 3: Test method to assess the performance of volume/area adjustment systems, First Edition

KS ISO 16122 -1:2015 Kenya Standard - Agricultural and forestry machinery - Inspection of sprayers in use Part 1: General, First Edition

KS ISO 16122-2:2015 Kenya Standard - Agricultural and forestry machinery - Inspection of sprayers in use Part 2: Horizontal boom sprayers, First Edition

KS ISO 16122-3:2015 Kenya Standard - Agricultural and forestry machinery - Inspection of sprayers in use Part 3: Sprayers for bush and tree crops, First Edition

KS ISO 16122-4:20 15 Kenya Standard - Agricultural and forestry machines - Inspection of sprayers in use Part 4: Fixed and semi-mobile sprayers, First Edition

KS ISO 24253-1 :20.15 Kenya Standard - Crop protection equipment - Spray deposition test for field crop Part 1: Measurement in a horizontal plane, First Edition

KS ISO24253-2:2015 Kenya Standard - Crop protection equipment - Spray deposition test for field crop Part 2: Measurement in a crop, First Edition

KS ISO 7749-1:1995 Kenya Standard - Agricultural irrigation equipment - Rotating spriniders Part 1: Design and operational requirements, First Edition

KS ISOl3847:2013 Kenya Standard - Petroleum and natural 17,as industries - Pipeline transportation systems - Welding of pipelines, First &lition

KS ISO 671:1982 Keiiya Standard - Steel and cast iron - Detirmination of sulphur content - Cons bustion Utrimetric method, First Editicn

KS ISO 7500-1:2018 Kenya Standard - Metallic materials - Calibra tion and verification of static uniaxiinl testing machines Part 1: Tensioafcompression testing machines - Calibrattion and verification of the force-measur, ing system, First Edition

KS ISO 7500-2:2008 Kenya Standard - Metallic materials - Verifièa tion of static uniaxial testing machines Part 2: Tension creep testing machinn s - Verification of the applied force, Fir rst Edition

KSISO 10714I992 Kenya Standard - Steel and iron - Drtermin ation of phosphorus content - Phosphov; anadomolybdate Spectrophi tometric method, First Edition

KS EAS 18-1:2017 Kenya Standard - Cement Part 1: Composition, specification and conformity• criteria for common cements, Second Edition

KS EAS 18-2:2017 Kenya Standard - Cement Part 2: Conformity evaluation, Second Edition

KS EAS 148-1:2017 Kenya Standard - Cement - Test methods Part 1: Determination of strength, Second Edition

KSEAS 148-2:2017 Kenya Standard - Cement - Test methods Part 2: Chemical analysis, Second Edition

KS EAS 148-3:2017 Kenya Standard - Cement - Test methods Part 3: Determination of setting times and soundness, Second Edition

KS EAS 148-4:2017 Kenya Standard - Cement - Test Methods Part 4: Quantitative determination of constituents, Second Edition

KS EAS 148-5:2017 Kenya Standard - Cement - Test methods Part 5: Pozzolanicity test for pozzolanic cements, Second Edition

KS EAS 148-6:20 17 Kenya Standard - Cement - Test methods Part 6: Determination of fineness, Second Edition

KS EAS 148-7:20 17 Kenya Standard - Cement - Test methods Part 7: Methods of taking and preparing samples, Second Edition

KS EAS 148-8:2017 Kenya Standard - Cement - Test methods Part 8: Heat of hydration - Solution method, Second Edition

KS 1555-1:2018 Kenya Standard - Gully tops and manhole tops for vehicular and pedestrian areas - Specification Part 1: Definitions, classification, general principles of design, performance requirements and test methods, First Edition

KS 1555-2:20 18 Kenya Standard - Gully tops and manhole tops for vehicular and pedestrian areas - Specification Part 2: Gully tops and manhole tops made of cast iron, First Edition

KS 1555-3:20 18 Kenya Standard - Gully tops and manhole tops for vehicular and pedestrian areas - Specification Part 3: Gully tops and manhole tops made of steel or aluminium alloys, First Edition

KS 1555-4:2018 Kenya Standard - Gully tops and manhole tops for vehicular and pedestrian areas - Specification Part 4: Gully tops and manhole tops made of steel reinforced concrete, First Edition

KS 1555-5:20 18 Kenya Standard - Gully tops and manhole tops for vehicular and pedesthan areas - Specification Part 5: Gully tops and manhole tops made of composite materials, First Edition

KS 1555-6:2018 Kenya Standard - Gully tops and manhole tops for vehicular and pedestrian areas - Specification Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly (vinyl chloride) (PVC-U) ,First Edition

KS ISO 10426-2:2003 Kenya Standard - Petroleum and natural gas industries - Cements and materials for well cementing Part 2: Testing of well cements, First Edition

KS ISO 10426-3:2003 Kenya Standard - Petroleum and natural gas industries - Cements and materials for well cementing Part 3: Testing of deep water well cement formulations, First Edition

2944 THE KENYA GAZETTE -- 17th August, 2018

KS ISO 10426-4:2004 Kenya Standard - Petroleum and natural gas industries - Cements and materials for well cementing Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure, First Edition

KS ISO 10426-5:2004 Kenya Standard - Petroleum and natural gas industries - Cements and materials for well cementing Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure, First Edition

KS ISO 10426-6:2008 Kenya Standard - Petroleum and natural gas industries - Cements and materials for well cementing Part 6: Methods for determining the static gel strength of cement formulations, First Edition

KS ISO 2301:1973 Kenya Standard - Sawn timber of broadleaved species - Defects - Measurement, First Edition

KS ISO 13061-10:2017 Kenya Standard - Physical and mechanical properties of wood - Test methods for small clear wood specimens Part 10: Determination of impact bending strength, First Edition

KS ISO 13061-11:2017 Kenya Standard - Physical and mechanical properties of wood - Test methods for small clear wood specimens Part 11: Determination of resistance to impact indentation, First Edition

KS ISO 13061-12:2017 Kenya Standard - Physical and mechanical properties of wood - Test methods for small clear wood specimens Part 12: Determination of Static hardness, First Edition

KS ISO 13061-13:2016 Kenya Standard - Physical and mechanical properties of wood - Test methods for small clear wood specimens Part 13: Determination of radial and tangential shrinkage, First Edition

KS ISO 13061-14:2016 Kenya Standard - Physical and mechanical properties of wood - Test methods for small clear wood specimens Part 14: Determination of volumetric shrinkage, First Edition

KS ISO 13061-15:2017 Kenya Standard - Physical and mechanical properties of wood - Test methods for small clear wood specimens Part 15: Determination of radial and tangential swelling, First Edition

KS ISO 13061-16:2017 Kenya Standard - Physical and mechanical properties of wood - Test methods for small clear wood specimens Part 16: Determination of volumetric swelling, First Edition

KS ISO 13061-17:2017 Kenya Standard - Physical and mechanical properties of wood - Test methods for small clear wood specimens Part 17: Determination of ultimate stress in compression parallel to grain, First Edition

KS ISO 7165:2017 Kenya Standard - Fire-fighting - Portable fire extinguishers, Second Edition

KS ISO 11601:2017 Kenya Standard - Fire-fighting - Wheeled fire extinguishers, Second Edition

KS ISO/TS 11602-1:2010 Kenya Standard - Fire protection - Portable and wheeled fire extinguishers Part

Selection and installation, Second Edition

KS ISO/TS

11602-2:2010 Kenya Standard - Fire protection - Portable and wheeled fire extinguishers Part

Inspection and maintenance, Second Edition

KNWA 2800:2018 Kenya Standard - Handling, storage anti transportation of LPG in .IMO type 5 ISo tanks - Code of practice, First Edition

KNWA 2822:2018 Kenya Standard - Tractors and machiner for agriculture and forestry - Lovj horsepower tractors - Specification, First Edition

Trade Affairs

KS EAS 64:2017 Kenya Standard - Groundnut (peanut) oil for cosmetic industry - Specification, Second Edition

KS EAS 65:2017 Kenya Standard - Coconut oil for cosmetic industry - Specification, First Edition

KS EAS 86:2017 Kenya Standard - Sesame (simsim) oil for cosmetic industry - Specification, Second Edition

KS EAS 425-1:2017 Kenya Standard - Skin powder, - Specification Part 1: Body and face powder, First Edition

KS EAS 425-2:2017 Kenya Standard - Skin powders - Specification Part 2: Baby powder, First Edition

KS EAS 835-1:2017 Kenya Standard - Bath preparations Part 1: Synthetic detergent-based foam baths and shower gels - Specification, First Edition

KS EAS 837:2017 Kenya Standard - Avocado oil for cosmetic industry - Specification, First Edition

KS EAS 840:2017 Kenya Standard - Shaving cream - Specification, First Edition

KS EAS 841:2017 Kenya Standard - Hair oils - Specification, First Edition

KS EAS 842-1:2017 Kenya Standard - Hair shampoo Part 1: Soap based - Specific:ation, First Edition

KS EAS 844:2017 Kenya Standard - Aryl di-amine-based liquid oxidation hair (Jyes - Specification, First Edition

KS EAS 845:2017 Kenya Standard - Cosmetic pencils - Specification, First Edition

KS EAS 846:2017 Kenya Standard -- Glossary of terms relating to the cosmetic industry, First Edition

Food and Agricuture

KS 2765:2018 Kenya Standar1 - Monitoring and sampling of fortified foods - Guidelines, First Edition

KS 2775:20 18 Kenya Standard - Labeling of complementasy foods and designated products - Requirements, First Edition

KS 317-4:2018 Kenya Standard - Carcasses and meat cuts - Specification Part 4: Camel, First Edition

KS 2761:2018 Kenya Standard - Meat hygiene - Code of practice, First Edition

KS 2762:2018 Kenya Standard - Offal - Specification, First Edition

KS 2773:2018 Kenya Standard - Livestock markets - Specification, First Edition

KS 2774-1:2018 Kenya Standard - Grading live animal for meat trade - Specification Part 1: Cattle, First Edition

KS 2774-2:20 18 Kenya Standard - Grading live animal for meat trade - Specification Part 2: Goat, First Edition

17th August, 2018 THE KENYA GAZETTE 2945

KS 2774-3:2018 Kenya Standard - Grading live animal for meat trade - Specification Part 3: Sheep, First Edition

KS 2774-4:2018 Kenya Standard - Grading live animal for meat trade - Specification Part 4: Camel, First Edition

KNWA 28 16:2018 Kenya Standard - Feed grade yeast products - Specification, First Edition

KS 2430:2018 Kenya Standard - Ginger paste - Specification, Second Edition

KS 243 1:2018 Kenya Standard - Garlic paste -

Specification, Second Edition

KS 2432:20 18 Kenya Standard - Garam masala - Specification, Second Edition

KS 2131:2018 Kenya Standard - Tamarind paste -

Specification, Second Edition

KS 150 927:2009 Kenya Standard - Spices and condiments - Determination of extraneous matter and foreign matter content, First Edition

KS 2782:2018 Kenya Standard - In shell pistachio nuts - Specification, First Edition

KS 1284:2018 Kenya Standard - Substitute vinegar - Specification, Third Edition

Services

KS ISO 5127:2017 Kenya Standard Information and documentation - Foundation and vocabulary, Second Edition

KS ISO 11799:2015 Kenya Standard - Information and documentation - Document storage requirements for archive and library materials, Second Edition

KS ISO 15489-1:2016 Kenya Standard - Information and documentation - Records management Part 1: Concepts and principles, Second Edition

KS ISO 17316:2015 Kenya Standard - Information and documentation - International standard link identifier (ISLI) ,First Edition

KS ISO 18461:2016 Kenya Standard - International museum statistics, First Edition

KS ISO 17680:20 15 Kenya Standard - Tourism and related services - Thelassotherapy - Service requirements, First Edition

KS ISO 20712-3:2014 Kenya Standard - Water safety signs and beach safety flags Part 3: Guidance for use, Second Edition

EAC/COMESA

KS 2756:2018 Kenya Standard - Packaged flavored drinking water - Specification, First Edition

The following standards are hereby confirmed

KS ISO 618: 1974 Kenya Standard - Paper - Articles of stationery that include detachable sheets - Overall trimmed sizes

KS 811:2013 Kenya Standard - Silk (sheen) emulsion paints for interior and exterior use - Specification

KS ISO 22414:2004 Kenya Standard - Paper - Cut-size office paper - Measurement of edge quality

KS ISO 15318:1999 Kenya Standard - Pulp, paper and board - Determination of 7 specified polychiorinated biphenyls (PCB)

KS ISO 15360-1:2000 Kenya Standard - Recycled pulps - Estimation of stickies and Plastics Part 1: Visual method.

KS ISO 23713:2005 Kenya Standard - Pulps - Determination of fibre coarseness by automated optical analysis - Polarized light method

KS ISO 353:1975 Kenya Standard - Processed wnting paper and certain classes of printed matter -

Method of expression of dimensions.

KS 235 1:2012 Kenya Standard - Surgical spirit - Specification

KS 924:2012 Kenya Standard - Specification for motor vehicle chevrons, decals and strips

KS 2350:2012 Kenya Standard - Sodium silicate - Specification

KS 87:20 12 Kenya Standard - Hydrochloric acid - Specification

KS 1180:2012 Kenya Standard - Ethyl methyl ketone(butanone for industrial use) - Specification

KS 1075-3:1991 Kenya Standard - Glossary of terms relating to fishing nets Part 3: Description and designation of knotted netting

KS 1076:1998 Kenya Standard - Specification for fishing nets

KS 1129-2:1992 Kenya Standard - Test methods for fishing nets Part 2: Determination of breaking load of knot and netting yarn

KS 1129-3:1995 Kenya Standard —Test methods for fishing nets Part 3: Determination of elongation of netting yarns

KS 1129-5:1997 Kenya Standard - Test methods for fishing nets Part 5: Determination of mesh breaking load of netting

KS 1630-1:2002 Kenya Standard - Methods of test f-r knitted fabrics Part 1: Method for determination of dimensions and dimensional stability of knitted fabrics

KS 207-2:1996 Kenya Standard - Glossary of textile terms pertaining to defects in fabrics Part 2: Knitted fabrics

KS 438:1985 Kenya Standard - Method for determination of pilling resistance of fabrics (brush pilling tester)

KS 493:1983 Kenya Standard - Specification for knitted nylon fabric

KS 494:1983 Kenya Standard - Specification for knitted vests

KS 495:1983 Kenya Standard - Specification for gent's knitted briefs

KS 525:1984 Kenya Standard - Specification for ladies knitted briefs

KS 632:1988 Methods for determination of dimensional changes of knitted products containing wool

KS 78 1-1:1988 Kenya Standard - Specification for cones Part 1: Paper cones

KS 781-2:1989 Kenya Standard - Specification for cones Part 2: Plastic cones

KS ISO 13938-1:1999 Textiles - Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension

KS ISO 13938-2:1999 Kenya Standard - Textiles - Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension

2946 THE KENYA GAZETTE 17th. August, 2018.

KS ISO 23606:2009 Kenya Standard - Textiles Knitted fabrics - Representation and pattern design

KS 1113-1:1993 Kenya Standard - Specification for spun yarns Part 1: Cotton yarns

KS 1113-3:1993 Kenya Staisdard - Specification for spun yarns Part 3: Polyester / CcJlulosic blended yarns

KS 1113-4:1996 Kenya Standard - Specification for staple spun yarns Part 4: Polyester/wool blended yarns

KS 1120:1992 Kenya Standard - Specification for doubling and twisting bobbins

KS 1128:1995 Kenya Standard - Specification for wicks for non-pressure stoves

KS 1233:1992 Kenya Standard - Specification for spinning doubling and twisting rings

KS 529:1984 Kenya Standard - Specification for elastic flat braid

KS 665:1998 Kenya Standard - Specification for textile labels

KS 933:1990 Kenya Standard - Specification for tubes (bobbins) for ring spinning

KS 588: 1999 Kenya Standard - Specification for PVC slippers

KS LEC 60514:1975 Kenya Standard - Acceptance inspection of class 2 alternating-current watthour meters.

KS EAS 388-2:2005 Kenya Standard -- High-voltage fuses Part 2: Expulsion fuses

KS 1187:1993 Kenya Standard - Specification for metallic clips for electrical wiring

KS 311-1:1987 Kenya Standard - Specification for miniature circuit breakers (MCIIs)

KS IEC 61643-1:2002 Kenya Standard - Surge protective devices connected to low-voltage power distribution systems Part I: Performance requirements and testing methods

KS 1827:2007 Kenya Standard - Voltage characteristics of electricity supplied by public distribution systems

KS 311-1:1987 Kenya Standard - Specification for miniature circuit breakers (MCBs)

KS ISO 361:1975 Kenya Standard - Basic ionizing radiation' symbol

KS ISO 14152:2001 Kenya Standard - Neutron radiation protection shielding - Design principles and considerations for the choice of appropriate materials

KS ISO 14146:2000 Kenya Standard - Radiation protection - Criteria and performance limits for the periodic evaluation of processors of personal dosemeters for X and gamma radiation

KS ISO 8194:1987 Kenya Standard - Radiation protection, - Clothing for protection against radioactive contamination - Design, selection, testing and use

KS OIML R 119:1996 Kenya Standard - Pipe provers for testing measuring systems for liquids other than water

KS 1950:2007 Kenya Standard - X-ray analysis equipment - Protection against ionizing radiation - Code of practice

KS 1988:2007 Kenya Standard - Safe use of radiation gauges - Code of practice

KS 1989:2006 Kenya Standard - Cabinet X-ray equipment for examination of letters packages, baggage, freight.and other articles for security, quality control and other purposes - Requirements

KS 1990:2007 Kenya Standard - Safe use of ionizing radiation in training institutions - Codeof practice

KS 2032:2007 Kenya Standard - Near-surface disposal radioactive waste - Code of practice

KS 2029:2007 Kenya Standard - Corpses containing radioactive materials - Safe handling - Code of practice

KS.2030:2007 Kenya Standard - Discharge of patients undergoing treatment with radioactive substances - Code of practice

KS 1953:2007 Kenya Standard - Healthcare practitioners exposed to ionizing radiation - Code of practice.

KS 1954:2007 Kenya Standard - Medical research - Administration of ionizing radiation to human subjccts - Requirements

KS. ISO 19105:2000 Kenya Standard - Geographic information - Conformance andtesting

KS IS01 19106:2001 Kenya Standard. - Geographic information - Profiles

KS ISO 19107:2003. Kenya, Standard - Geographic information - Spatial schema.

KS.ISO 19108:2002 Kenya Standard - Geographic information —Temporal schema

KS ISO 19.11:2003 Kenya Standard - Geographic information - Spatial, referencing by geographic identifiers

KS ISO 19116:2004 Kenya Standard. - Geographic information - Positioning services

KS ISO/IEC 15457-1:2008. Kenya Standard - laformation technology

- Identification cards - Thin flexible cards; part 1: Physical'characteristics

KS ISOJIEC 15457-2:2007 Kenya Standard - InformatIon technology

- Identification cards - Thin flexible cards. art 2: Magnetic recording technique

KS ISO/IEC 15457-3:2002 Kenya Standard - Information technology

- Identification cards - Thin flexible cards Part 3: Test methods

KS LSO/JEC 15693- 120 10. Kenya Standard. - Information technology

- Identification cards- Contactless integrated circuit cards - Vicinity Cards Part 1: Physical characteristics

KS ISOIIEC 15693-2:2006 Kenya Standard - Information technology

- identification cards - Contactless integrated circuit cards - Vicinity Cards Part 2: Air interface and initialization

KS ISO/IEC 15693-3:2009 Kenya Standard - Information technology

- identification cards - Contactless integrated circuit cards - Vicinity cards Part 3: Anti-collision and transmission protocol

KS ISO/IEC 19794-1:2006 Kenya Standard - jnformation technology

Biometric Data Interchange Formats Part 1: Framework

17th August,2018 THE KENYA GAZETTE 2947

KS'ISOIIEC 19794-2:2005 Kenya Standard - Information technology

- Biometric Data Interchange Formats Part Finger minutiae data

KSISO/TEC 19794-3:2006 Kenya Standard - Information technology

- Biometric Data Interchange Formats Part Finger pattern spectral data

KS ISO/IEC 11693-2: 2009 Kenya Standard - information technology

—ldetification cards, Optical memory cards Part 2: Co-existence of optical memory with Other machine readable technologies

KS ISO/IEC 11694-4: 2008 Kenya Standard - Information technology Identification cards, Optical memory cards - Linear recording method Pah-4. Logicat data Structures

KS ISO IEC 11695-3:2008 KenyaStandard - information teciinology

- Identification cards, Optical memory cards - Holographic recording method Part 3: Optical properties and characteristics

KS ISO/IEC 10373-1: 2006 Kenya Standard - Identifjeation card:,

Test methods Part 1: General characteristics

KSISOIIEC 10373-2: 2006 'Kenya Standard - Identification cards -

Test methods Part 2: Cards with magnetic stripes

KS ISO/IEC 10373-3: 2010 Kenya Standard - Identification cards -

Test methods Part 3: integrated circuit cards

KS ISO/IEC 10373-7: 2008 Kenya Standard - Identification cards -

Test methods Part 7: Vicinity cards

KS ISO/LEC 10373-8:2011 Kenya Standard - Identification cards -

Test methods Part 8: USB4CC

KS ISO/fEC 10373-9: 2011 •Kenya Standard - Identification cards -

Test methods Part 9: Optical memory cards - Holographic recording method

KS ISO/fEC 19784-1:2006 Kenya Standard - Information technology

—Biometric Application Programming Interface Part 1: BioAPI specification

KS ISO/fEC 19784-2: 2007 Kenya Standard - Information technology

Biometric Application Programming Interface Part 2: Biometric archive function 'provider interface

KS ISO/fEC 19785-2:2006 Kenya Standard - Information technology

- Common Biometric Exchange• Formats Framework Part 2: Procedures for the operation of the Biometric Registration Authority

KS ISO/TEC 24708:'2008 Kenya Standard - Information technology - Biometrics - BioAPI Interworking protocol

KS ISO/fEC 24713-1:2008 Biometric profiles for inter-operability

&data interchange Part I: Overview of biometric systems and biometric profiles

KS ISO /EC 247 13-2: 2008 Kenya Standard - Biometric profiles for

interoperability &data interchange Part 2: Physical access control for employees at airports

KS 1SO,'IEC 19795- :2006

Kenya Standard - Information technology.— Biometric performance testing and reporting Part 1: Principles and framework

KS ISO/EEC 19795-2:2007

Kenya Standard - Information technology-- Biometric performance testing and reporting Part 2: Testing methodologies for technology and scenario evaluation

KS lSO/IEC 19795-3:2007

Kenya Standard - Information technology Biometric performance testing and

reporting Part 3: Modality-specific testing

KS ISOIFC 9795-4:2098

Kenya Standard - Information echnology -- Biometric performance

testing and reporting Part 4: Interoperability perfc smance testing

KS ISO/EEC 9795-5:2011

Kenya Standard - Information technology-- Biometric performance testing and reporting Part 5: Access control scenario and grading scheme

KS ISO/IEC 19795-6:2012

Kenya Standard - Information technology - Biometric performance testing and reporting Part 6: Testing methodologies for operational evaluation

KS ISO/JEC 19795-7:2011

Kenya Standard - Information technology— Biometric performance testing and reporting Part 7: Testing of on-card biometric comparison algorithms

KS ISO fEC 11770-1:2010

Information technology - Security techniqties - Key management Part 1: Framework

KS ISO 2560:2009

Kenya Standard - Welding consumables - Covered electrodes for manual metal are welding of non-alloy and fine grain steels -- Classification

KS 1512:2005

Kenya Standard - Steel, carbon and high- strength, low-alloy hot-rolled sheet and cold-rolled sheet - General requirements

KS 1513:2005

Kenya Standard - Steel sheet and strip, heavy thickness coils, carbon, hot-rolled - Specification

KS 7 1-2:1989

Kenya Standard - Method for rockwell hardness test (Scales M, L, R)

KS EAS 441:2007

Kenya Standard - Agricultural tractor drive wheel tyres— Method of measuring tyre rolling circumference

KSEAS 188:1997

Kenya Standard - Machetes - Specification

KS 151:2006

Kenya Standard - Panga - Specification

KS ISO/TS 28923:20 12 Kenya Standard - Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool

KS ISO 4254-12: 2012 Kenya Standard - Agricultural Machinery - Safety Part 12: Rotary disc and drum mowers and flail mowers

KS ISO 4254-13:2012 Kenya Standard - Agricultural machinery - Safety Part 13: Large rotary mowers

KS EAS 360:2004 Kenya Standard - Pneumatic tyres for agriculture implements

2948 THE KENYA GAZETTE 17th August, 2018

KS EAS 132:1999 Kenya Standard - Hoes (jembes) - Both plain and forked - Specification.

KS 154:2000 Kenya Standard - Specification for both plain and fork hoes

KS 1763:2002 Kenya Standard. - Transport quality system - Road, rail and inland navigation transport - Quality system requirements to supplement KS ISO 9002 for the transport of dangerous goods with regard to safety

KS 2130:2008 Kenya Standard - Grout for jointing marble, granite, ceramic and porcelain tiles - Cement-based - Specification

KS 1002:2012 Kenya Standard - Anti-termite measures in buildings - Pre-construction chemical treatment measures

KS 1003:2012 Kenya Standard - Anti-termite measures in buildings - Treatment for existing buildings

KS 2308:2012 Kenya Standard - Specification for soup stock medium(beef)

KS 2310: 2012 Kenya Standard - Specification for edible meat co-products

KS EAS 782:2012 Kenya Standard - Composite flour - Specification

KS EAS 778:2012 Kenya Standard - Fresh bitter cassava - Specification

KS EAS 780:2012 Kenya Standard - Fresh cassava leaves - Specification

KS EAS 771:2012 Kenya Standard - Fresh sweet potatoes - Specification

KS EAS 776:2012 Kenya Standard - Production and handling of fresh cassava - Code of practice

KS EAS 775:2012 Kenya Standard - Production and handling of fresh ware potatoes - Code of practice

KS EAS 777:2012 Kenya Standard - Reduction of acrylamide in potato products - Code of practice

KS EAS 779:2012 Kenya Standard - High quality cassava flour - Specification

KS 1928:2006 Kenya Standard - Guidelines for production, processing and labelling of organically produced foods

KS 2225:2012 Kenya Standard - Genetically modified organisms and derived products - Labelling of food and feed

KS ISO

24276:2006/AMD1 Kenya Standard - Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - General requirements and definitions Amendment I

KS ISO 20481:2008 Kenya Standard - Coffee and coffee products - Determination of the caffeine content using high performance liquid chromatography (HPLC) - Reference method

KS ISO 6669:1995 Kenya Standard - Green and roasted coffee - Determination of free flow - Flow bulk density of whole beans (Routine Method)

KS EAS 130:1999 Kenya Standard - Green coffee bean - Specification

KS ISO 10470:2004 Kenya Standard - Green coffee - Defect reference chart

KS ISO 6673:2003 Kenya Standard - Green coffee - Determination of loss in mass at 105 degrees cilisious

KS ISO 1446:2001 Kenya Standard - Green coffee- Determination of water content - Basic reference

KS ISO 24114: 2011 Kenya Standard - Instant coffee - Criteria for authenticity

KS ISO 11292-1995 Kenya Standard - Instant coffee - Determination of free and total carbohydrate contents - Method using high performance anion exchange chromatography

KS ISO 8460:1987 Kenya Standard - Instant coffee - Determination of free flow and compacted bulk densities.

KSISO4O72:1982. Kenya Standard - Instant coffee - Determination of loss in mass at 70 degrees cilisious under reduced pressure

KS ISO 3726:1983 Kenya Standard - Instant coffee - Determination of loss in mass at 70 under reduced pressure.

KS ISO 6670:2002 Kenya Standard - Instant coffee - Sampling method for bulk units with liners.

KS LAS 105:2008 Kenya Standard - Roasted coffee beans and roasted ground coffee - Specification

KS ISO 11817:1994 Kenya Standard - Roasted ground coffee - Determination of moisture content - Karl Fischer method (Reference method)

KS ISO 11294:1994 Kenya Standard - Roasted ground coffee - Determination of moisture content - Method by determination of loss in mass at 103 (Routine method)

KS ISO 20712-2:2007 Kenya Standard - Water safety signs and beach safety flags Part: Specifications for beach safety flags - Colour, shape, meaning and performance

The following standards are hereby withdrawn forthwith;

KS 667:2013 Kenya Standard - Water-thinned priming paints for wood - Specification

KS 811:2013 Kenya Standard - Silk (sheen) emulsion paints for interior and exterior use - Specification

KS 813:2013 Kenya Standard - Matt solvent-borne paints for interior and exterior use - Specification

KS 812:2012 Kenya Standard - Matt emulsion paints for interior and exterior use - Specification

KS 1276:2012 Kenya Standard - Air-dried roofing paints - Specification

KS 1027-1:2012 Kenya Standard - Auto refinishing paints - Specification Part I: Synthetic resin based

KS 1027-2:2012 Kenya Standard - Auto refinishing paints - Specification Part 2: Nitrocellulose resin based

KS 1718:2003 Kenya Standard - Thinner for nitrocellulose resin-based paints and lacquers - Specification

KS 1717:2003 Kenya Standard - Thinner for synthetic resin-based auto-refinishing paints - Specification

KS 1716:2012 Kenya Standard - 2-Pack acrylic resin- based auto-refinishing paint -

Specification.

17th August, 2018 --- THE KENYA GAZETTE 2949

KS 1719:2003 Kenya Standard - Thinner for acrylic resin based auto-refinishing paint - Specification

KS ISO 15360-1:2000 Kenya Standard - Recycled pulps - Estimation of Stickies and Plastics Part 1: Visual method. Replaced by KS ISO 15360- 1:20 11

KS ISO 15360-2: 2001 Kenya Standard - Recycled pulps -

Estimation of Stickies and Plastics Part 2: Image analysis method. / Paper and Paper Products Replaced by KS ISO 15360- 2:20 15

KS ISO 16065-1:2001 Kenya Standard - Pulps - Determination of fibre length by automated optical analysis - Part 1: Polarized light method. I Paper and paper product. Replaced by KS ISO 16065-1:2014

KS ISO 8784-1:2005 Kenya Standard - Pulp, paper and board - Microbiological examination Part 1: Total count of bacteria, yeast and mould based on disintegration. / Paper and Paper Products. Replaced by KS ISO 8784:2014.

KS ISO 5270:1998 Kenya Standard —Puips - Laboratory sheets - Determination of physical properties Replaced by KS ISO 5770:2012

KS 2157-1:2009 Kenya Standard - Hot applied thermoplastic road marking paint - Specification Part 1: Constituent material and mixtures, To be replaced by KS 2157- 1:2018

KS 2157-2:2009 . Kenya Standard - Hot applied Thermoplastic Road Marking paint - Specification Part 2: Specification for road performance, To be replaced by KS 2157- 2:2018

KS 421:2010 Kenya Standard - Newsprint - Specification, To be replaced by KS 42 1;20 18

KS 921:1991 Kenya Standard - Specification for kraft liner, To be replaced by KS 921:2018

KS EAS 255-4:2009 Kenya Standard - Textiles - Quantitative chemical analysis Part 4: Mixtures of Certain proteins and certain other fibres - To be replaced by KS ISO 1833-4:2017

KS EAS 255-7:2009 Kenya Standard - Textiles - Quantitative chemical analysis Part 7: Mixture of polyamide and Certain other fibres, To be replaced by KS ISO 1833-7:20 17

KS EAS 255-11:2009 Kenya Standard - Textiles - Quantitative chemical analysis Part 11: Mixtures of certain cellulose fibres and certain other fibres - To be replaced by KS ISO 1833- 11:2017

KS IEC 61557-1:1997 Kenya Standard - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 1: General requirements to be replaced by KS IEC 61557-1:2007

KS IEC 61557-2:1997 Kenya Standard - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 2: Insulation resistance to be replaced by KS IEC 61557- 2:2007

KS IEC 61557-3:1997 Kenya Standard - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 3: Loop impedance to be replaced by KS IEC 61557-3:2007

KS IEC 61557-4:1997 Kenya Standard - Electrical safety in low voltage distribution systems up to 1 000 V ac. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 4: Resistance of earth connection and equipotential bonding to be replaced by KS IEC 61557-4:2007

KS IEC 61557-5:1997 Kenya Standard - Electrical safety in low voltage distribution systems up to 1 000 V ac. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 5: Resistance to earth to be replaced by KS IEC 6 1557-5:2007

KS IEC 61557-6:1997 Kenya Standard - Kenya Standard - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 6: Effectiveness of residual current devices (RCD) in TI', TN and IT systems (first Edition) to be replaced by KS LEC 61557-6: 2007

KS IEC 61557-7:1997 Kenya Standard - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 7: Phase sequence to be replaced by KS IEC 61557-7:2007

KS IEC 61557-8:1997 Kenya Standard - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 8: Insulation monitoring devices for IT systems to be replaced by KS IEC 6 1557-8:2007

KS IEC 61557-9:1997 Kenya Standard - Electrical safety in low voltage distribution systems up to 1 000 V ac. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 9: Equipment for insulation fault location in IT systems to be replaced by KS IEC 61557-9:2007

KS IEC 61557-10 :1997 Kenya Standard - Kenya Standard - Electrical safety in low voltage distribution systems up to 1 000 V ac. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures to be replaced by KS IEC 61557-10:2007

KS ISO 4190-1:1999 Kenya Standard - Lift (Elevator) installation -- Part 1: Class I, II, III and VI lifts to be replaced by KS ISO 4190-1:2010

KS ISO 4190-5:1987 Kenya Standard - Lift (Elevator) installation Part 5: Control devices, signals and additional fittings to be replaced by KS ISO 4190-1:2006

KS IEC 62209-1:2005 Kenya Standard - Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz) to be replaced by KS IEC 62209- 1:2016

KS OIML R 117:1995 Kenya Standard - Measuring systems for liquids other than water to be replaced by

(a) KS OIML R 117-1: 2007 (1,) KSOIMLR 117-2: 2014 (c) KSOIMLR 117-3: 2014

2950 THE KENYA GAZETFE 17th August, 2018

KS ISO 7503-1:1988 Kenya Standard - Evaluation of surface contamination Part 1: Beta-emitters (maximum beta energy greater than 0,15 MeV) and alpha-emitters to be replaced by KS ISO 7503-1:2016

KS ISO 7503-2:1988 Kenya Standard - Evaluation of surface contamination Part 2: Tritium surface contamination to be replaced by KS ISO 7503-2:2016

KS ISO 7503-3:1996 Kenya Standard - Evaluation of surface contamination Part 3: Isomeric transition and electron capture emitters, low energy beta-emitters (Ex < 0,15 MeV) to be replaced by KS ISO 7503-3:2016

KS ISO 9712:1992 Kenya Standard - Non-destructive testing - Qualification and certification personnel to be replaced by KS ISO 97 12:2012

KS ISO 12790-1:2001 Kenya Standard - Radiation protection - Performance criteria for radiobioassay Part 1: General principles to be replaced by KS ISO 28218:2010

KS ISO 19101:2002 Kenya Standard - Geographic information - Reference model, to be replaced by KS ISO 19101-1:2014 and ISO 19101-2:2008

KS 150 19109:2005 Kenya Standard - Geographic information - Rules for application schema to be Treplaced by KS ISO 19109:2015

KS ISO 19110:2005 Kenya Standard - Geographic information - Methodology for feature cataloguing, to be replaced by KS ISO 19110:2016

KS ISO 19111:2003 Kenya Standard - Geographic information - Geographic information - Spatial referencing by coordinates, to be replaced byKS ISO 19111:2007 and KSISO 19111- 2 :2009

KS ISO 19113:2002 Kenya Standard - Geographic information - Quality principles to be replaced by KS ISO 19157

KS ISO 19114:2003 Kenya Staadard - Geographic information - Quality evaluation procedures to be replaced by ISO 19157

KS ISO 19115:2003 Kenya Standard .- Geographic information - Metadata to be replaced by KS ISO 191 15-1:2014, KS ISO 19115-2:2009 and KS ISO 19115-3:2016

KS ISO,'IEC 101 Ill-I: 2000 Kenya Standard - Information technology - Security techniques - Hash- functions Part 1: General, To be replaced by KS ISO/lEG 10118-1:2006

KS ISO/IEC 24759:2014 Kenya Standard - Kenya Standard -

Information technology - Security techniques - Test requiri;nents for cryptographic modules, To be rep1a.! by KS .ISOIIEC 24759 :2017

KS ISO/IEC 18013-3:2009 Kenya Standard - Information technology

- Personal identification - ISO-compliant driving licence Part 3: Access control, authentication and integrity validation, To be replaced by KS ISO1IEC 18013-3:2017

KS ISO/IEC 10116:2006 Kenya Standard - Information technology - Security techniques - Modes of operation for an n-bit block cipher, To be replaced by KS ISO/JEC 10116:2017

KS ISO/IEC 9995-1:1994 Kenya Standard - Information technology - Keyboard layouts for text and office systems Part 1: General principles governing keyboard layouts. / Office Equipment, to be replaced by KS ISO/LEC 9995-1:2009

KS ISO/IEC 9995-2:1994 Kenya Standard - Information technology - Keyboard layouts for text and office systems Part 2: Alphanumeric section. I Office Equipment, To be replaced by KS ISO/IEC 9995-2:2009

KS ISO/IEC 9995-3:1994 Information technology - Keyboard

layouts for text and office systems Part 3: Complementary layouts of the alphanumeric zone of the alphanumeric section. I Office Equipment, to be replaced byKS ISO/IEC 9995-3:2010

KS ISO/LEC 9995-4:1994 Kenya Standard - Information technology - Keyboard layouts for text and office systems Part 4: Numeric section. / Office Equipment, To be replaced by KS ISO/IEC 9995-4:2009

KS ISO/IEC 9995-5:1994 Kenya Standard - Information technology - Keyboard layouts for text and office systems Part 5: Editing section. / Office Equipment, To be replaced by KS ISO/IEC 9995-5:2009

KS ISO/IEC 9995-7:2002 Kenya Standard - Information technology - Keyboard layouts for text and office systems Part 7: Symbols used to represent functions. / Office Equipment, To be replaced by KS ISOIIEC 9995-7:2009

KS ISO/IEC 9995-8:1994 Kenya Standard - Information technology - Keyboard layouts for text and office systems Part 8: Allocation of letters to the keys of a numeric keypad. / Office Equipment, To be replaced by KS ISO/IEC 9995-8:2009

KS 205: 1979 Kenya Standard - Specification for retreaded car and commercial vehicle tyres, Equivalent to KS EAS 53:2000

KS EAS 433-1:2007 Kenya Standard - Tyres, valves and tubes - List of equivalent terms Part 1: Tyres, Equivalent to KS ISO 3877-1:1997

KS EAS 433-2:2007 Kenya Standard - Tyres, valves and tubes - List of equivalent terms Part 2: Tyre valves. Equivalent to KS ISO 3877-2:1997.

KS EAS 433-3:2007 Kenya Standard - Tyres, valves and tubes - List of equivalent terms Part 3: Tubes, Equivalent to KS ISO 3877-3:1978

KSEAS 433-4:2007 Kenya Standard - Tyres, valves and tubes - List of equivalent terms Part 4: Solid tyres, Equivalent to KS ISO 3877-4:1984

KS EAS 439-1:2007 Kenya Standard - Tyres and rims (metric series) for agricultural tractors and machines Part 1: Tyre designation, dimensions and marking, and tyre / rim coordination, Equivalent to KS ISO 7867- 1:2005

KS EAS 439-2:2007 Kenya Standard - Tyres and rims (metric series) for agricultural tractors and machines Part 2: Service description and load ratings, Equivalent to KS ISO 7867-2:2005

KS EAS 440:2007 Kenya Standard - Tyres for agricultural tractors and machines - 'Code-designated and service-description masked radial drive-wheel tyres, Equivalent to KS ISO 8664:2005

KS EAS 442-1:2007 Kenya Standard - Earth-mover tyres and rims Part I: Tyre designation and dimensions, Equivalent to KS ISO 4250-1:2006

KS EAS 442-2:2007 Kenya Standard - Earth-mover tyres and rims Part 2: Loads and inflation pressures, Equivalent to KS ISO 4250-2:2006

17th August, 2018 THE KENYA GAZETTE 2951

KS EAS 442-3:2007 Kenya Standard - Earth-mover tyres and rims Part 3: Rims, Equivalent to KS ISO 4250-3:2006

KS EAS 443-1:2007 Kenya Standard - Tyres (ply rating marked series) and rims for agricultural tractors and machines Part 1: Tyre designation and dimensions, and approved rim contours, Equivalent to KS ISO 425 1- 1:2005

KS EAS 443-2:2007 Kenya Standard - Tyres (ply rating marked series) and rims for agricultural tractors and machines Part 2: Tyre load ratings, Equivalent to KS ISO 425 1-2:2005

KS EAS 443-3:2007 Kenya Standard - Tyres (ply rating marked series) and rims for agricultural tractors and machines Part 3: Rims, Equivalent to KS ISO 425 1-3:1994

KS EAS 443-4:2007 Kenya Standard - Tyres (ply rating marked series) and rims for agricultural tractors and machines Part 4: Classification and nomenclature, Equivalent to KS ISO 4251-4:1992

KS EAS 443-5:2007 Kenya Standard - Tyres (ply rating marked series) and rims for agricultural tractors and machines Part 5: Log skidder tyres, Equivalent to KS ISO 4251-5:1992

KS EAS 444-1:2007 Kenya Standard - Industrial tyres and rims Part 1: Pneumatic tyres (metric series) on 50 tapered or flat base rims - Designation, dimensions and marking, Equivalent to KS ISO 3739-1:2007

KS EAS 444-2:2007 Kenya Standard - Industrial tyres and rims Part 2: Pneumatic tyres (metric series) on 5apered or flat base rims - Load ratings, Equivalent to KS ISO 3739-2:1992

KS EAS 445-1:2007 Kenya Standard - Industrial tyres and rims - Solid tyres (metric series) for pneumatic tyre rims Part 1: Designation, dimensions and marking, Equivalent to KS ISO 10499- 1:1991

KS EAS 445-2:2007 Kenya Standard - Industrial tyres and rims - Solid tyres (metric series) for pneumatic tyre rims Part 2: Load ratings, Equivalent to KS ISO 10499-2:1998

KS EAS 446:2007 Industrial tyres and rims - Cylindrical and conical base rubber solid tyres (metric series) - Designation, dimensions and marking, Equivalent to KS 150 10500:1991

KS EAS 447:2007 Kenya Standard - Tyres for mobile cranes and similar specialized machines, Equivalent to KS ISO 10571:1995

KS EAS 448:2007 Kenya Standard - Valves for tubeless tyres and valves for tubes - Identification system for valves and their components, Equivalent to KS ISO 425 1-1:2005

KS EAS 449-1:2007 Kenya Standard - Truck and bus tyres and rims (metric series) - Part I: Tyres. Equivalent to KS ISO 4209-1:2001

KS EAS 449-2:2007 Kenya Standard - Truck and bus tyres and rims (metric series) Part 2: Rims, Equivalent to KS ISO 4209-2:2001

KS EAS 469:2008 Kenya Standard - Passenger car tyres - Spare unit substitutive equipment (SUSE), Equivalent to KS ISO 16992:2006

KS EAS 470:2008 Kenya Standard - Truck and bus tyres -

Verifying tyre capabilities - Laboratory test methods, Equivalent to KS ISO 10454:1999

KS EAS 471-1:2008 Kenya Standard - Aircraft tyres and rims Part 1: Specifications, Equivalent to KS ISO 3324-1:1997

KS EAS 47 1-2:2008 Kenya Standard - Aircraft tyres and rims Part 2: Test methods for tyres, Equivalent to KS ISO 3324-2:1998

KS EAS 473-1:2008 Kenya Standard - Motorcycle tyres and rims (metric series) Part 1: Design guides, Equivalent 10 KS ISO 5751-1:2004

KS EAS 473-2:2008 Kenya Standard - Motorcycle tyres and rims (metric series) Part 2: Tyre dimensions and load-carrying capacities, Equivalent to KS ISO 5751-2:2004

KS EAS 473-3:2008 Kenya Standard - Motorcycle tyres and rims (metric series) Part 3; Range of approved rim contours, Equivalent to KS ISO 5751-3:2004

KS EAS 474-1:2008 Kenya Standard - Bicycle tyres and rims Part I: Tyre designations and dimensions, Equivalent to KS ISO 5775-1:1997

KS EAS 474-2:2008 Kenya Standard - Bicycle tyres and rims Part 2: Rims, Equivalent to KS ISO 5775- 2: 1996

KS EAS 18-1:2001 Kenya Standard - Cement Part 1: Composition, specification and conformity criteria for conanon cement, To be replaced by KS EAS 18-1:2016

KS EAS 18-2:2001 Kenya Standard - Cement Part 2: Conformity evaluation, To be replaced by KS EAS 18-2:20 16

KS EAS 148-1:2000 Kenya Standard - Cement - Test methods Part I: Determination of strength, To be replaced by KS EAS 148-1:2016

KS EAS 148-2:2000 Kenya Standard - Cement - Test methods Part 2: Chemical analysis, To be replaced by KS EAS 148-2:2016

KS EAS 148-3:2000 Kenya Standard - Cement - Test methods Part 3: Determination of setting times and soundness, To be replaced by KS EAS 148-3:2016

KS EAS 148-4:2000 Kenya Standard - Cement - Test Methods Part 4: Quantitative determination of constituents, To be replaced by KS EAS 148-4:2016

KS EAS 148-5:2000 Kenya Standard - Cement - Test methods Part 5: Pozzolanicity test for pozzolanic cements, To be replaced by KS EAS 148-5:2016

KS EAS 148-6:2000 Kenya Standard - Cement - Test methods Part 6: Determination of fineness, To be replaced by KS EAS 148-6:2016

KS EAS 148-7:2000 Kenya Standard - Cement - Test methods Part 7: Methods of taking and preparing samples, To be replaced by KS EAS 148-7:2016

KS EAS 148-8:2000 Kenya Standard - Cement - Test methods Part 8: Heat of hydration - Solution method, To be replaced by KS EAS 148-8:2016

KS 1555:2000 Kenya Standard - Specification for gully tops and manhole tops for vehicular and pedestrian areas, To be replaced by KS 1555-1:2018, KS 1555-2:2018, KS 1555-3:2018, KS 1555-4:2018, KS 1555-5:2018, KS 1555-6:2018

KS ISO 7165:1999 Kenya Standard - Fire-fighting - Portable fire extinguishers - Performance and construction, To be replaced by KS ISO 7165:2017

2952 THE KENYA GAZETTE 17th August, 2018

KS ISO 11601:1999 Kenya Standard - Wheeled fire extinguishers - Performance and construction, To be replaced by KS ISO 11601:2017

KS ISO 11602-1:2000 Kenya Standard - Fire protection - Portable and wheeled fire extinguishers Part

Selection and installation, To be replaced by KS ISO 11602-1:2010

KS ISO 11602-2:2000 Kenya Standard - Fire protection - Portable and wheeled fire extinguishers Part

Inspection and maintenance, To be replaced by KS ISO 11602-2:2010

KNWA 2393:2012 Kenya Standard - Monitoring of fortified food products- Guidelines / Food To be replaced by KS 2765:20 18

KS 2299:2012 Kenya Standard - Code of practice for Ante-mortem and post-mortem inspection of meat animals To be replaced by KS 2761:2018

KS 2298:2012 Code of practice for Ante-mortem and post- mortem inspection of poultry To be replaced by KS 2761:2018

KS 2430:2012 Kenya Standard - Ginger paste - Specification, To be replaced by KS 2430:2018

KS 243 1:2012 Kenya Standard - Garlic paste - Specification, To be replaced by KS 243 1:20 18

KS 2432:2012 Kenya Standard - Garam masala - Specification, To be replaced by KS 2432:2018

KS 2131:2012 Kenya Standard - Tamarind concentrate - Specification, To be replaced by KS 2131:2018

KS 1284:2008 Kenya Standard - Substitute vinegar Specification, To be replaced by KS 1284:2018

KS ISO 5127:2001 Kenya Standard - Information and documentation - Foundation and vocabulary, To be replaced by KS ISO 5127:2017

KS ISO 11799:2003 Kenya Standard - Information and documentation - Document storage requirements for archive and library materials, To be replaced by KS ISO 11799:2015

KS ISO 15489-1:2001 Kenya Standard - Information and documentation - Records management -- Part 1: Concepts and principles, To be replaced by KS ISO 15489-1:2016

KS ISO 20712-3:2008 Kenya Standard - Water safety signs and beach safety flags Part: 3 Guidance for use, To be replaced by KS ISO 20712-3:2014

KS EAS 64:2000 Kenya Standard - Groundnut (peanut) oil for cosmetic industry - Specification. To be replaced by KS EAS 642017

KS 800: 1989 Kenya Standard - Specification for coconut oil for Cosmetic industry, To be replaced by KS EAS 65:2017

KS 797: 1989 Kenya Standard - Specification for sesame (simsim) oil for cosmetic industry, To be replaced by KS EAS 86:20 17

KS EAS 86:2000 Sesame (simsim) oil for cosmetic industry - Specification. To be replaced by KS EAS 86: 2017

KS 1570-1:2001 Kenya Standard - Specification for skin powders Part 1: Body and face powders, To be replaced by KS EAS 425-1:2017

KS 1570-2:2007 Kenya standard - Specification for Skin Powders Part 2: Baby Powders, To be replaced by KS EAS 425-2:2017

KS 1767-1:2006 Kenya Standard - Kenya Standard - Specification for bath preparations Part 1: Foam baths and shower gels. To be replaced by KS LAS 835-1:2017

KS 1765:2003 Kenya Standard - Specification for avocado oil for cosmetic industry. To be replaced by KS EAS 837:20 17

KS 916-1:2012 Kenya Standard - Shaving preparations - Specification Part 1: Shaving creams. To be replaced by KS EAS 840: 2017

KS 602: 1999 Kenya Standard - Specification for hair oils, To be replaced by KS EAS 841:2017

KS 576:2006 Kenya Standard - Hair shampoo, soap based - Specification, To be replaced by KS EAS 842-1:2017

KS 793:1999 Kenya Standard - Specification for liquid oxidation hair dyes, aryl di-amine-based, To be replaced by KS EAS 844: 2017

KS 1569: 2001 Kenya Standard - Specification for cosmetic pencils, To be replaced by KS LAS 845: 2017

KS 1509:2000 Kenya Standard —Glossary of terms relating to the cosmetic industry.

Dated the 20th April, 2018. CHARLES ONGWAE,

MR/4796363 Secretary, National Standards Council.

GAZETFE NOTICE No.8457

THE LEGAL EDUCATION ACT

(No. 27 of2012)

PASSING OF EXAMINATIONS AND PUPILAGE

PURSUANT to section 8 (1) (/) of the Legal Education Act, 2012, it is notified for general information that the following twenty-four (24) persons:

Reg. No. Name ID/Passport Number

Nationality

CLE20I 30820 Wabwire Joshua A2428566 Kenyan CLE20140556 Mama Kevin Ndung'u 27842230 Kenyan CLE20141466 Ongeta Jared Juma 22453552 Kenyan CLE20141493 Mutwii Jones Mutuku 5973178 Kenyan CLE20 150695 Kwesiga James BI 144253 Ugandan CLE20150788 Mama Samuel

Kimumu 27052782 Kenyn

CLE20150942 Mohammed Nabil Mohammed

27136911 Kenyan

CLE20I 60119 Mutitu Esther Njeri 28776974 Kenyan CLE20160153 Kevin Clay Odari 29629808 Kenyan CLE20160288 Olivia Mole Mwachofi 23358547 Kenyan CLE20160359 KwingaNdunge

Carolyne 29583716 Kenyan

CLE20160568 Ng'ang'a Simon Karanja

29287634 Kenyan

CLE2016 1066 Mtsumi Ashina Ntenga 29349006 Kenyan CLE20I6I 124 Mwangi Daisy Gathoni 28480079 Kenyan CLE2016I 176 Langat Hillary

Kipngetich 29300695 Kenyan

CLE20161314 DecheDzidza Emmaculate

29705885 Kenyan

CLE20161440 Kiyuki Mwari Betty 29647595 Kenyan CLE20161719 Kimani Charles

Muchiri 29616753 Kenyan

CLE2016I 752 Anne Njeri Kamau 29868205 Kenyan CLE20I61776 Tumaini Wamocha

Nasongo Samuel 32383143 Kenyan

17th August, 2018

THE KENYA GAZETTE 2963

GAZETFE NOTICE No. 8525

GAZETTE NOTICE No.8529

CHANGE OF NAME

NOTICE is given that by a deed poll dated 30th January, 2018, duly executed and registered in the Registry of Documents at Nairobi as Presentation No. 1341, in Volume Di, Folio 190/4716, File No. MMXVIII, by our client, Denis Muriithi M'Njaria, of P.O. Box 6621-00100, Nairobi in the Republic of Kenya, formerly known as Denis Muriithi Wera, formally and absolutely renounced and abandoned the use of his former name Denis Muriithi Wera and in lieu thereof assumed and adopted the name Denis Muriithi M'Njaria, for all purposes and authorizes and requests all persons at all times to designate, describe and address him by his assumed name Denis Muriithi M'Nj aria only.

KOMU & KAMENJU, Advocates for Denis Muriithi M'Njaria,

MRI5 159787 formerly known as Denis Muriithi Wera.

GAZET]TE NOTICE No.8526

CHANGE OF NAME

NOTICE is given that by a deed poll dated 15th September, 2017, duly executed and registered in the Registry of Documents at Mombasa as Presentation No. 417, in Volume B-13, Folio 1832/13415, File No. 1637, by my client, Naheed Rishad Bawazir, of P.O. Box 83004-80100, Mombasa in the Republic of Kenya, formerly known as Naheed Rishad Hamid, formally and absolutely renounced and abandoned the use of his former name Naheed Rishad Hamid and in lieu thereof assumed and adopted the name Naheed Rishad Bawazir, for all purposes and authorizes and requests all persons at all times to designate, describe and address him by his assumed name Naheed Rishad Bawazir only.

NDEGWA KATISYA SITONIK & ASSOCIATES, Advocate for Naheed Rishad Bawazir,

MRJ5 159929 formerly known as Naheed Rishad Hamid.

CHANGE OF NAME

NOTICE is given that by a deed poll dated 1st July, 2017, duly executed and registered in the Registry of Documents at Nairobi as Presentation No. 1711, in Volume Dl, Folio 128/3754, File No. MMXVIII, by me, Duncan Mwania Chengo, formerly known as Duncan Mwania Kyengo, formally and absolutely renounced and abandoned the use of my former name Duncan Mwania Kyengo and in lieu thereof assumed and adopted the name Duncan Mwania Chengo, for all purposes and authorizes and requests all persons at all times to designate, describe and address me by my assumed name Duncan Mwania Chengo only.

DUNCAN MWANIA CHENGO, MRI5 159720 formerly known as Duncan Mwania Kyengo.

GAZETFE NOTICE No. 8530

CHANGE OF NAME

NOTICE is given that by a deed poll dated 25th July, 2018, duly executed and registered in the Registry of Documents at Nairobi as Presentation No. 2595, in Volume DI, Folio 208/5849, File No. MMXVIII, by our client, Maureen Kere Odumbe (Guardian) on behalf of Alexandra Kere Odumbe (minor), formerly known as Amne Seha formally and absolutely renounced and abandoned the use of his former name Amne Seha, and in lieu thereof assumed and adopted the name Alexandra Kere Odumbe for all purposes and authorizes and requests all persons at all times to designate, describe and address him by his assumed name Alexandra Kere Odumbe only.

WOKABI MATHENGE & COMPANY, Advocates for Maureen Kere Odumbe,

(Guardian) on behalf ofAlexandra Kere Odumbe (minor), MR/S 155590 formerly known as Amne Seha.

GAZETFE NOTICE No. 8531

CHANGE OF NAME GAZErFE NOTICE No. 8527

CHANGE OF NAME

NOTICE is given that by a deed poil dated 15th July, 2018, duly executed and registered in the Registry of Documents at Mombasa as Presentation No.4, in Volume B-13, Folio 1857/13675, File No. 1637, by my client, Fatma A. Wang'ombe, of P.O. Box 1294-80200, Malindi in the Republic of Kenya, formerly known as Lilian Wangui Rukwaro, formally and absolutely renounced and abandoned the use of her former name Lilian Wangui Rukwaro and in lieu thereof assumed and adopted the name Fatma A. Wang'ombe, for all purposes and authorizes and requests all persons at all times to designate, describe and address her by her assumed name Fatma A. Wang'ombe only.

OKINYO BYRON BARRACK, Advocate for Fatma A. Wang 'ombe,

MRJ5 159930 formerly known as Lilian Wangui Rukwaro.

GAZETFE NOTICE No. 8528

CHANGE OF NAME

NOTICE is given that by a deed poll dated 19th June, 2018, duly executed and registered in the Registry of Documents at Mombasa as Presentation No. 419, in Volume B-13, Folio 1857/13673, File No. 1637, by me, Jeremy Chege Njonjo, of P.O. Box 50106-00100, Nairobi in the Republic of Kenya, formerly known as Njonjo Chege Kariuki, formally and absolutely renounced and abandoned the use of my former name Njonjo Chege Kariuki and in lieu thereof assumed and adopted the name Jeremy Chege Njonjo, for all purposes and authorizes and requests all persons at all times to designate, describe and address me by my assumed name Jeremy Chege Njonjo only.

Dated the 1st August, 2018.

JEREMY CHEGE NJONJO, MRI5 159522 formerly known as Njonjo Chege Kariuki.

NOTICE is given that by a deed poll dated 5th June, 2018, duly executed and registered in the Registry of Documents at Nairobi as Presentation No. ,1654, in Volume DI, Folio 180/4534, File No. MMXVIII, by me, Hassan N. Lakicha & Co., advocates on behalf of Abdilatif Ibrahim Noor, of P.O. Box 15420-00200, Nairobi in the Republic of Kenya, formerly known as Abdilatif Ibrahim Ali, formally and absolutely renounced and abandoned the use of his former name Abdilatif Ibrahim Ali, and in lieu thereof assumed and adopted the name Abdilatif Ibrahim Noor for all purposes and authorizes and requests all persons at all times to designate, describe and address him by his assumed name Abdilatif Ibrahim Noor only.

Dated the 7th August, 2018.

HASSAN N. LAKICHA & COMPANY, Advocates on beha If ofAbdilatifibrahim Noor,

MRJ5 159716 formerly known as Abdilatif Ibrahim Ali.

GAZErFE NOTICE No. 8532

CHANGE OF NAME

NOTICE is given that by a deed poll dated 22nd February, 2018, duly executed and registered in the Registry of Documents at Nairobi as Presentation No. 323, in Volume DI, Folio 79/1250, File No. MMXVIII, our client Helen Nelie Wambui Nyambura, of P.O. Box 53386-00200, Nairobi in the Republic of Kenya, formerly known as Nelie Hellen Wambui alias Hellen Nyambura Mwaura, formally and absolutely renounced and abandoned the use of her former name Nelie Hellen Wambui alias Hellen Nyambura Mwaura, and in lieu thereof assumed and adopted the name Helen Nelie Wambui Nyambura for all purposes and authorizes and requests all persons at all times to designate, describe and address her by her assumed name Helen Nelie Wambui Nyambura only.

KARANJA NJENGA & COMPANY, Advocates of Helen Nelie Wambui Nyambura,

formerly known as Nelie Hellen Wambui MR/S 155625 alias Hellen Nyambura Mwaura.

2964 -- THE KENYA GAZETTE 17th August, 2018

NOW ON SALE

ECONOMIC SURVEY, 2011 Price.KSh. 1,000

THE FINANCE BILL, 2014 Price. KSh. 235

2011/2012 ESTIMATES OF RECURRENT

EXPENDITURE OF THE

GOVERNMENT OF KENYA FOR THE YEAR ENDING

30TH JUNE, 2011 VOL.1

Price: KSh. 1,400 VOL.11

Price. KSh. 1,200

VOL. III Price.KSh. 1,100

2011/2012 ESTIMATES OF DEVELOPMENT

EXPENDITURE OF THE

GOVERNMENT OF KENYA FOR YEAR ENDING

30TH JUNE, 2011

VOL.1 Price: KSh. 1,100

VOL.11 Price. KSh. 1,100

THE NATIONAL ASSEMBLY CONSTITUENCIES AND COUNTY ASSEMBLY WARDS ORDER, 2012

Kenya Gazette Supplement No. 13

(Legal Notice No. 14 of 2012)

Price: KSh. 880

STATISTICAL ABSTRACT, 2011

Price: KS/i. 1,000

THE CONSTITUTION OF KENYA Price: KSh. 250

For further Information contact: The Government Printer, P.O. Box 30128-00100, Nairobi, Tel. 317840/41/57/86/87.

IMPORTANT NOTICE TO SUBSCRIBERS TO THE KENYA GAZETTE

THE following notes are for the guidance of persons submitting "copy" for inclusion in the Kenya Gazette, Supplement, etc.:

The Kenya Gazette contains Notices of a genera) nature which do not affect legislation. They are, therefore, submitted to the Government Printer directly.

Legislative Supplement contains Rules and Regulations which are issued by the Central Government. Because of this, they must be submitted to the Government Printer through the office of the Attorney-General.

Bill Supplement contains Bills which are for introduction in the National Assembly.

Act Supplement contains Acts passed by the National Assembly.

All "copy" submitted for publication should be prepared on one side of an A4 sheet no matter how small the Notice is, each page being numbered and should be typewritten with double spacing. Copy should be clear, legible and contain no alterations.

Particular attention should be paid to the following points:

Signature must be supported by rubber-stamping or typing the name of the signatory in capital letters.

Must be correct and filled in where necessary.

Care should be taken to ensure that all headings to Notices and references to legislation are up to date and conform with the Revised Edition of the Laws of Kenya.

EXTRACT FROM THE CoDy OF REGULATIONS, SECTION D-

Kenya Gazette

"D 34. (1) Communications for the Kenya Gazette should reach the Government Printer not later than 9 a.m. on Friday of the week before publication is desired. The Government Printer will not publish communications received after that hour until the next subsequent issue of the Gazette.

(2) Ministries will be required to pay for the Kenya Gazette and to meet the cost of advertising in it.

It is emphasized that these notes are for guidance only, but it is requested that persons submitting copy for publication first satisfy themselves that such copy is complete in every respect.

SUBSCRIPTION AND ADVERTISEMENT CHARGES

With effect from 1st July, 2012, subscription and advertisement fee for the Kenya Gazette are as follows:

SUBSCRIPTION CHARGES:

KSh. cts. Annual Subscription (excluding postage in Kenya) ......................... 13,920 00 Annual Subscription (including postage in Kenya) ......................... 16,935 00 Annual Subscription (Overseas) .......................................................32,015 00 Half-year Subscription (excluding postage in Kenya) .....................6,960 00 Half-year Subscription (including postage in Kenya)......................8,470 00 Half-year Subscription (overseas)....................................................16,010 00 Single copy without supplements.....................................................60 00

GAZETTED SUPPLEMENT CHARGES—PER Copy: POstage in EA

KSh. cts KSh. cts.

Upto2 pages......................................................................15 00 60 00 Upto 4 pages......................................................................25 00 60 00 Upto 8 pages ...................................................................... 40 00 60 00 Upto12 pages....................................................................60 00 60 00 Upto 16 pages....................................................................80 00 60 00 Upto 20 pages....................................................................95 00 155 00 Upto24pagea .................................................................... 110 00 115 00 Upto32pages ......................... .......................................... 145 00 115 00

Up to 36 pages ............... .................................................... 165 00 ' depending Up1040 pagea .................................................................... 180 00

Each additional 4 pages or part thereof .............................. 20 00 J ADVERTISEMENT CHARGES: KS/I. cts.

Full page..............................................................................................27,840 00 Fullsingle column...............................................................................13,920 00 Three-quarter column .......................................................................... 10,440 00 Half column.........................................................................................6,960 00 Quarter column or less ........................................................................3.480 00

Subscribers and advertisers are advised to remit payments by bankers cheques, or deposit using our account at National Bank of Kenya, A/C No. 0100 1000903 100, drawn in favour of "Government Printers".

Revenue stamps cannot be accepted. Subscriptions and advertisement charges are paid in advance.

S. N. MIGWI, Government Printer.

PRINTED AND PUBLISHED BY THE GOVERNMENT PRINTER, NAIROBI