The Inside StoryJohn Deere Reman Starter Comparison

The Inside Story – John Deere Reman Starter2

Why the John Deere Reman Starter?

• Designed to meet customer demands

• Provide customer a low-cost repair alternativeo Competitively Priced, Typically 30%-40% less than new

• All units meet or exceed John Deere original specifications

• Factory backed warranty of 1 year/unlimited hours if dealerinstalled

• Remanufactured, NOT Rebuilt

The Inside Story – John Deere Reman Starter3

Packaging

• John Deere Reman foampackaging fully protects unitduring shipment.

• This extra protection couldpotentially reduce downtime.

• Safety kit included.

• Competitive starters are notproperly packaged to protectit from damage duringshipment

The Inside Story – John Deere Reman Starter4

Barrel Insulation

• John Deere Reman barrelassembly is coated with paintinside to protect against rust.

• If barrel is not protected with arust inhibitor, this can eat away atthe installation over time causingfailure of the unit.

• Competitive products arenot always properly coatedto protect from rust.

The Inside Story – John Deere Reman Starter5

Barrel Assembly Pole Shoes

• John Deere Reman pole shoesare coated with a rustpreventer.

• A rust protector will protectfrom an electrical short in theunit.

• The pole shoe must beproperly coated to protectfrom rust.

The Inside Story – John Deere Reman Starter6

Application Specific Jump Start Protection for

• John Deere Reman unit hassafety cover that fullyprotects against jumpstarting.

• All starters come with jumpstart safety kit to protectfrom potential injury.

• Competitive products are notalways equipped with propersafety covers andinstructions.

The Inside Story – John Deere Reman Starter7

Starter Brushes

• John Deere Reman starterbrushes are properly seated toensure proper contact witharmature commutator.

• Starter will be low on powerwhich could result in a slow orno start situation.

• Brushes must be properlyseated to perform atacceptable levels. These arenot.

The Inside Story – John Deere Reman Starter8

Properly Clocked

• John Deere Reman starters areproperly clocked, perapplication.

• This will decrease installationand downtime.

• Some competitive startersare improperly clocked.

• This will increase installationtime as well as machinedowntime.

The Inside Story – John Deere Reman Starter9

Solenoid

• John Deere Reman solenoidsare remanuactured 100% toOEM specifications.

• This ensures product integrity

• Not all solenoids are new whencomparing to John DeereReman. Some still havecorrosion from this competitor.

The Inside Story – John Deere Reman Starter10

Armature Shaft

• John Deere Reman armature shaftsare balanced and straightened toallow starter drive to engage fully.

• If drive does not engage fully itcould result in a premature failure.

• Competitive armature shafts willbe reused, as in this one, ratherthan proper balancing.

The Inside Story – John Deere Reman Starter11

John Deere Reman Starter Summary

• Remanufactured not rebuilt

• Completely disassembled

• 100% replacement of worn parts

• Armatures are balanced 100%

• Each unit is tested for amperage and torque load

• All units meet or exceed John Deere Specifications

• All John Deere Reman starters carry a 1 year/unlimited hours parts and laborwarranty if dealer installed.