Sign In Create AccountCreate Account

Britmodeller.com → Aircraft Modelling → Military Aircraft Modelling Discussion by Era → WWII

Please log in to reply

the "definitive" japanese navy grey...?Started by expositor , Oct 10 2010 08:29 PM

14 replies to this topic

This topicSearch...

View New ContentView New Contentwww.britmodeller.comwww.britmodeller.com Forums MembersMembers

#1

New Member

Members

66 posts

expositor

Posted 10 October 2010 - 08:29 PM

sorry to start this anew, but after searching, you gents have had a lot to say on this subject, but i was hoping to add that ihad read somewhere years ago that the ijn used spar varnish to seal their camouflaged carrier aircraft, accounting forthe 'ameiro' color for the ship-born planes as opposed to their land-based ones. is this true, or bogus? if this has beendiscussed already and i missed it, please forgive my reopening this worm can.thanks!

#2

Completely ObsessedMember

Members

5,621 posts

Graham Boak

Posted 11 October 2010 - 12:11 PM

In short, it's bogus.

Go to j-aircraft.org for the best advice, but be prepared to set aside some time. If you are lucky Nick Millman may pop inwith some shorter help.

#3

New Member

Members

66 posts

expositor

Posted 12 October 2010 - 06:06 AM

hi again gb,

i did check one japanese site which seemed to indicate that some camouflaged naval aircraft were coated with some typeof clear or caramel-tinted coating, but for the a5m not the a6m, so i await with patience, for one of our experts to set mestraight on the grey color i can use on my zeke models....which i probably won't complete for years....

thanks!

#4

Very Obsessed Member

Gold Member

2,418 posts

Nick Millman

Posted 12 October 2010 - 07:20 AM

Worm can? I don't think so.

There is a contemporaneous description of the factory colour in the official Kugiho 0266 report from February 1942which is consistent with the current appearance of the paint surface on surviving pieces. Separate pieces from differentaircraft have been measured with photospectrometric equipment to identify their colour values by two separateresearchers in two different countries with exactly similar results. The original pigments in the paint have now beenidentified and when recreated and aged in laboratory conditions the appearance is exactly similar to the surviving pieces.Most of the surviving paint surfaces have darkened and yellowed slightly with thermal ageing. Across scores of artifacts aclear coat of varnish has been found on only one example and is suspected to have been added post-war to protect it asa "souvenir".

The "caramel" or amber (ameiro) effect on the grey is not the result of a varnish but rather an inherent characteristic ofthe interaction of the pigments and additives used in the original paint (as is the slightly greenish appearance) andspecifically designed for application to light metals. Fabric surfaces (rudder and ailerons) were coated with a differentformula that did not possess this characteristic and were more neutral grey in appearance.

the "definitive" japanese navy grey...? - WWII - Britmodeller.com 11/10/2013

http://www.britmodeller.com/forums/index.php?/topic/56941-the-definitive-japanese-navy-grey/ 1 / 5

There are no definitive Navy greys available in hobby paints but the selection of these remains a matter of personalchoice. Comparing them to the actual paint colour Tamiya XF-76 represents a moderately weathered (oxidised and"chalked") appearance on a Mitsubishi aircraft. White Ensigns Colour Coats ACJ16 Mitsubishi Zero Grey-Green isperhaps the closest to the colour as applied at the factory but just a little too brown. RAF "Hemp" is also similar but notexactly so - the Humbrol version being a little off. Polly Scale or Floquil "Concrete" are reasonable for a slightlyweathered example. Gunze (GSI/Creos) RLM 02 is a little too dark and not quite amber enough. None of these paintsquite captures the hue and reflectivity of the original (unscaled) colour. It is remarkably subtle - and pleasing - inappearance.

Greg Springer's mix for the unscaled paint on Pearl Harbor era Mitsubishi Zeros using Tamiya paint is as follows:-

100 drops J.A. Grey XF1440 drops Khaki XF493 drops Neutral Grey XF533 drops White XF22 drops Red XF7

The closest colour standards are FS 16350 (still slightly too brown) and RAL 7002 Olivgrau (Olive Grey) or RAL 7034Gelbgrau (Yellow Grey). The latter descriptions are appropriate. The colour is very similar to RLM 02 and has the samemetamerismic shift between green and brown. There is a whole swathe of paint technology and colour science behindthis observation that I won't go into here.

In operational use, particularly in tropical environments the paint surface oxidised and "chalked" rapidly towards theappearance of the bleached neutral and slightly blueish greys known so well.

#5

New Member

Members

66 posts

expositor

Posted 12 October 2010 - 07:09 PM

hello nick,

many thanks for taking the time to enlighten me. might there be any mixes for humbrol or testors paints? (white ensignpaints aren't so easy to get this side of the pond.) i know many modelers like to do scale lightening and fading, but ilighten very little if at all in 1/72, as the decals aren't and without an airbrush, lightening them to any extent is next toimpossible; at least for the lesser talented among us like me. how about a couple of drops of yellow in rlm 02 for a nearfactory-fresh aircraft?

thanks again,jim

#6

New Member

Members

162 posts

Steve N

Posted 15 October 2010 - 01:12 AM

Here's my 1/72 Hasegawa Zero 21 painted with Gunze Aqueous RLM 02. I know it's not exact, but I'm happy with it.

SN

the "definitive" japanese navy grey...? - WWII - Britmodeller.com 11/10/2013

http://www.britmodeller.com/forums/index.php?/topic/56941-the-definitive-japanese-navy-grey/ 2 / 5

#7

Very Obsessed Member

Gold Member

2,418 posts

Nick Millman

Posted 15 October 2010 - 08:27 AM

Hi Jim

Sorry for my late response. One thing to bear in mind if using RLM 02 is that the Testors version is lighter and greyerthan the Gunze (GSI/Creos), more like a quite heavily oxidised and chalked example. Rather than adding straight yellowit is better to use a yellow ochre like Humbrol's 225 Matt Mid Stone in hue (I'm sorry I cannot suggest a Testorsalternative to this). This will introduce the amber at the expense of the green but very little is required. The incrementalshift from a neutral grey to a brownish or amber grey is tiny. The stock Humbrol paint always suggested for RLM 02 doesnot have this yellow/brown characteristic being rather a "cool" grey-green. As part of the research into this I alsomeasured as many examples of RLM 02 as I could access and found them all to have this yellow element in themeasured values - they are "warm" not "cool" colours. Even the Gunze paint is a little too "cool" but being in the ballparkyou could probably add a little yellow and white. The main goal is that the aircraft should still appear to be primarily grey(albeit a yellow/amber grey) in colour rather than brown or green. If it looks brown or green you have gone too far!

The problem is that unless matching to a swatch of the actual paint you are in the dark with these adjustments so tospeak. I am planning to make these available as decent sized paint swatches which can be used in conjunction with thesuggested mixes. Nevertheless, Steve's excellent model shows just how attractive the Zero looks when painted in straightRLM 02 and there is nothing wrong with a little experimentation.

Another thing to bear in mind if using Steve's model as a reference point is that the decking under the canopy shouldreally be painted in the anti-glare colour - the same blueish-black as the cowling.

HTHRegardsNick

#8

New Member

Members

162 posts

Steve N

Posted 15 October 2010 - 12:01 PM

Unfortunately I didn't find out about the rear deck color until after I'd finished the model. I also incorrectly painted theinsides of the gear doors and wheel wells Aotake. I understand they should be the exterior color.

SN

#9

Established Member

Members

320 posts

dragonlanceHR

Posted 15 October 2010 - 04:22 PM

Nic,

whatever happened to the idea of using RAF Hemp colour for IJN grey?

Its also one of those maybe greenish maybe brownish greys....

Regards,

Vedran

#10

New Member

Members

66 posts

expositor

Posted 15 October 2010 - 07:26 PM

hi nick and steve,

nick, no response is 'late;' i really appreciate your time in sharing your knowledge. i think testors has a middlestone colorso i'll try that, though i do have humbrol's as well. since my particular interest is naval and maritime aviation, i have thatdesert color so i can eventually do a couple of russian navy p-40 tomahawks; your mix suggestion with the rlm 02 shouldbe close enough for any zeke i might finish.might i also ask if that color was used throughout the war for not only the undersurfaces of later zekes, but for the othernaval combat aircraft as well?

steve, that zeke looks great, and as the hospital porter said to john merrick, "...i wouldn't change a thing(!)" by the way, idon't think you're wrong on the wheelwell color either, at least for the earlier versions, but hey, what do i know...?

the "definitive" japanese navy grey...? - WWII - Britmodeller.com 11/10/2013

http://www.britmodeller.com/forums/index.php?/topic/56941-the-definitive-japanese-navy-grey/ 3 / 5

nick, re: the rear cockpit area, i thought that was just the interior green shade specific to the manufacturer; if you sayblack, then black (or blue-black?) it is!

many thanks again!jim

Edited by expositor, 15 October 2010 - 07:27 PM.

#11

Very Obsessed Member

Gold Member

2,418 posts

Nick Millman

Posted 15 October 2010 - 08:03 PM

dragonlanceHR, on Oct 15 2010, 05:22 PM, said:

Nic,

whatever happened to the idea of using RAF Hemp colour for IJN grey?

Its also one of those maybe greenish maybe brownish greys....

Regards,

Vedran

Hi Vedran

If you re-read my post I think you will see that I do mention RAF Hemp as being very similar . . .

As with all colours it depends on how close is close . . .

RegardsNick

#12

Very Obsessed Member

Gold Member

2,418 posts

Nick Millman

Posted 15 October 2010 - 08:33 PM

expositor, on Oct 15 2010, 08:26 PM, said:

might i also ask if that color was used throughout the war for not only the undersurfaces of later zekes, but for the other naval combataircraft as well?

nick, re: the rear cockpit area, i thought that was just the interior green shade specific to the manufacturer; if you say black, then black (orblue-black?) it is!

Hi James

Once the Nakajima built Zero appeared on the scene there were slightly different colours in play but Mitsubishi went onusing it after the dark green camouflage was introduced. To begin with the Nakajima 'grey' tended to be an even moreamber hue than the Mitsubishi but from about mid-1943, after the dark green upper surfaces were introduced, theNakajima grey changed to a light medium "cool" grey without the strong amber appearance. Other companies such asAichi did use similar "warm" olive greys to the Mitsubishi too.

The cockpit decking is verified by the recovery of several actual examples and you can see one here where the remainsof the canopy frame has protected the original paint:-

http://www.straggler...re-colours.html

The Hasegawa kits, I think, suggest painting this area the upper surface colour which may be where the idea came frombut the anti-glare areas were specified to include the decking under the canopy so, whilst not ruling it out, such a finish(using the upper surface colour) would have to be considered as non-standard.

The Mitsubishi blue-black was similar to FS 25042 and tended to fade rapidly towards a blue-grey whilst one examplefrom Nakajima is closer to FS 27038. The colour was "black" in exactly the same way that RAF Night was "black". Bothpaints contained ultramarine pigment and the difference between Mitsubishi and Nakajima was probably due to theprocurement of synthetic and natural ultramarine pigments which had not been specified.

HTHRegardsNick

the "definitive" japanese navy grey...? - WWII - Britmodeller.com 11/10/2013

http://www.britmodeller.com/forums/index.php?/topic/56941-the-definitive-japanese-navy-grey/ 4 / 5

Back to WWII

Privacy PolicyBritmodeller.com → Aircraft Modelling → Military Aircraft Modelling Discussion by Era → WWII

#13

New Member

Members

66 posts

expositor

Posted 17 October 2010 - 06:42 AM

hi nick,

many thanks again for taking the time to answer my questions, and providing that link. now, if i could manage finishing azeke that looks half as nice as steve's....

sincerely,jim

#14

Very Obsessed Member

Banned

3,383 posts

Mentalguru

Posted 17 October 2010 - 08:22 AM

Hi guys- very interesting thread- thank you all for making it so.

Nice indeed to have an "open to all" Japanese topic thread, one that does what it says on the tin without constant referralto J-aircraft, and to have knowledge delivered in a concise and polite manner.

#15

Completely ObsessedMember

Members

5,621 posts

Graham Boak

Posted 17 October 2010 - 09:16 AM

There's an immense amount of information on j-aircraft. What is wrong with pointing those seeking information onJapanese colours at one of the best sources? Who knows, they might even find something that interests them outside oftheir initial query.

Change Theme Help Community Forum Software by IP.BoardCommunity Forum Software by IP.BoardLicensed to: Mike WilliamsLicensed to: Mike Williams

the "definitive" japanese navy grey...? - WWII - Britmodeller.com 11/10/2013

http://www.britmodeller.com/forums/index.php?/topic/56941-the-definitive-japanese-navy-grey/ 5 / 5