the core filter prepare the remote control · 2010. 4. 22. · :onlyforth-ba3/ _ :onlyfor th-ba1...
TRANSCRIPT
0000000000
_____
Thankyoufor purchasingaJVCproduct.
Beforeoperation,pleasereadthe instructionscarefully.
Forcustomeruse:
Enterbelow theModelNo.andSerialNo.which arelocatedeither on
the rear,bottom orsideof the cabinet.Retainthis informationfor futurereference.
ModelNo.
SerialNo.
CAUTION(SP-THBA3F/CA-THBAI)
TheC_/I button inany positiondoesnotdisconnectthemainsline.
Disconnectthe mainsplugto shut the poweroffcompletely(the STANDBY
lamp goesoff).TheMAINSplugor anappliancecouplerisusedasthe
disconnectdevice,thedisconnectdeviceshall remainreadilyoperable.
• WhentheSystemisonstandby,theSTANDBYlamp lights red.
• Whenthe Systemisturned on, theSTANDBYlamp goesoff.
Thepowercanbe remotecontrolled.
CAUTION(SP-THBA3W/SP-THBAI/RX-THBA3)
Thepowersupply to thesubwoofer is linkedto the centerunit. Disconnectthe
mainsplugto shut the poweroff completely(thePOWERONlamp goesoff).
TheMAINSplugoran appliancecouplerisusedasthedisconnectdevice,the
disconnectdeviceshall remainreadilyoperable.
• WhentheSystemisonstandby,theSTANDBY/ONlamplightsred.
• Whenthe Systemisturned on, theSTANDBY/ONlamp lights blue.
ATTENTION(SP-THBA3F/CA-THRA1)
Latouche V/l, dansn'importequelle position,ned_connectepasle
syst_medu secteur.D_connectezla fichedesecteurpour mettre l'appareilcompl_tementhorstension(let_moin STANDBYs'_teint).Lafiche secteur
ou uncoupleurestutilis_ commedispositifded_connexiondel'appareil,etl'appareild_connect_doit _trepr_t__tre utilis_.
• Quandle syst_meest enattente, le t_moin STANDBYestallum_ enrouge.• Quandle syst_meest soustension,le t_moin STANDBYs'_teint.
L'alimentationpeut _tre t_l_command_e.
ATTENTION(SP-THBA3W/SP-THBA1/RX-THBA3)
L'alimentationdu caissondegraveest reli_e_l'unit_ centrale.D_connectez
lafiche secteurpour mettre l'appareilcompl_tementhorstension(let_moinPOWERONs'_teint).
Lafichesecteurou uncoupleurest utilis_commedispositifded_connexionde
l'appareil,et l'appareild_connect_doit _trepr_t_ _treutilis_.
• Quandlesyst_meestenattente, let_moinSTANDBY/ONestallum_enrouge.
• Quandl'appareilest soustension,le t_moinSTANDBY/ONestallum_ enbleu.
Donot useanotherACadaptor to connectthismodel.
N'utilisezaucunautreADAPTATEURSECTEURpourconnectercemodule.
ntroduction
For U.S.A.
Thelightningflashwith arrowheadsymbol,within anequilateraltriangle, isintendedto alert theuserto the presence
of uninsulated"dangerousvoltage"within the product'senclosurethat maybeof sufficientmagnitudeto constitutea
riskof electricshockto persons,
Theexclamationpoint within an equilateraltriangle is intended
to alertthe userto the presenceof important operating
and maintenance(servicing)instructionsinthe literature
accompanyingthe appliance,
Pour lesEtats-Unis
zj_ Lesymbolede l'_clair_ l'int@ieurd'un triangle_quilat@alestdestin__alerter l'utilisateur sur lapresenced'une "tension
dangereuse"non isol_edansle boitierdu produit. Cettetension
est suffisantepourprovoquerl'_lectrocutionde personnes.
Lepoint d'exclamation_lqnt@ieurd'un triangle
_quilat@alest destin__alerter l'utilisateur sur la presence
d'op@ationsd'entretien importantesau sujetdesquellesdes
renseignementssetrouventdansle manueldqnstructions.
CAUTION
Batteryshallnot beexposedto excessiveheatsuchassunshine,fireor the like.
ATTENTION
Lespilesnedoiventen aucuncas_treexpos_es_ unechaleurexcessive(lumi@edu soleil, feu,etc.).
CAUTION
To reducethe riskof electricalshocks,fire, etc.:
I. Donotremovescrews,coversorcabinet.
2. Donotexposethisappliancetorain ormoisture.
ATTENTION
Afind'_viter tout risqued'_lectrocution,dqncendie,etc.:
I. Nepasenleverlesvis ni lespanneauxet nepasouvrir le coffretde l'appareih
2. Nepasexposerl'appareil_ la pluieni _ l'humidit_.
CAUTION
• Donot blocktheventilation openingsorholes.(If theventilation openings
orholesare blockedbya newspaperorcloth,etc., the heatmaynotbeable
to get out.)
• Donot placeanynakedflame sources,suchaslightedcandles,on the
apparatus.
• Whendiscardingbatteries,environmentalproblemsmust beconsideredand
local rulesor lawsgoverningthedisposalof thesebatteries mustbefollowed
strictly.
• Donotexposethisapparatusto rain,moisture,dripping orsplashingand
that noobjectsfilledwith liquids,suchasvases,shallbeplacedon the
apparatus.
ATTENTION
• Nebloquezpaslesorificesou lestrousdeventilation. (Si lesorificesou les
trousdeventilation sontbloqu_sparunjournal un tissu,etc., lachaleurpeut
ne pas_tre_vacu_ecorrectementde l'appareil.)
• Neplacezaucunesourcedeflamme nue,telle qu'unebougie,sur l'appareih
• Lorsde la raiseau rebutdespiles,veuillezprendreenconsid@ationles
probl_mesde l'environnementet suivrestrictementles r_gleset leslois
localessur lamiseau rebutdespiles.
• N'exposezpascetappareil_ lapluie,_ l'humidit_, _un _gouttementou _des
_claboussureset neplacezpasdesobjetsremplisdeliq uide,telsqu'unvase,
sur l'appareih
For U.S.A.
WARNING
TOPREVENTFIREORSHOCKHAZARDS,DONOTEXPOSETHISAPPARATUSTORAINORMOISTURE.
Pour lesEtats-Unis
AVERTISSEMENT
POURPREVENIRLESRISQUESD'INCENDIEOUDECHOCSELECTRIQUES,NEPAS
EXPOSERCEAPPAREILA LAPLUIEOUA L'HUMIDITE.
CAUTION:ProperVentilation
Toavoidriskof electricshockand fire, andto preventdamage,locatethe apparatusasfollows:
I. Front:Noobstructionsand openspacing.
2. Sides/Top/Back:Noobstructionsshouldbeplacedinthe areasshownbythe dimensionsbelow.
3. Bottom:Placeon thelevelsurface.Maintainanadequateair pathforventilation by placingonastandwith aheightof 10cm (3-15/16")or more.
ATTENTION:A_rationcorrecte
Pourpr#venirtout risqueded#charge#lectriqueoud'incendieet #vitertoute d#t@ioration,installezl'appareildela mani@esuivante:
I. Avant:Biend#gag#detout objet.
2. CGt#s/dessus/dessous:Assurez-vousqueriennebloquelesespacesindiqu#ssurlesch#maci-dessous.
3. Dessous:Posezl'appareilsurunesurfaceplaneet horizontale.Veillez) ceque saventilation correctepuissesefaireen le pla_antsurunsupport d'au moinsdix centim#tresdehauter.
TH-BA3
Front/ Face
15cm
(5-15/16")
15 cm (5-15/16")
cm (5-15/16")
TH-BAI
Front/Face
RXTHBA3SPTHBA3S SPTHBA3F SPTHBA3SSPTHBA3W
" - _ '................ _F
CATHBA1 SPTHBA1
ForU.S_.
Caution:Changesor modificationsnotexpresslyapprovedbyparty responsible
for compliancecouldvoid the user'sauthority to operatetheequipment.
Note: Thisequipment hasbeentestedand foundto complywith the limits
for a ClassBdigital device,pursuantto Part 15of theFCCRules.Theselimits
aredesignedto providereasonableprotectionagainstharmful interference
ina residentialinstallation.Thisequipment generates,usesandcan radiate
radiofrequencyenergyand, if not installedand usedinaccordancewith
the instructions,maycauseharmful interferenceto radiocommunications.
However,there isnoguaranteethat interferencewill notoccurina particular
installation.If thisequipmentdoescauseharmful interferenceto radioor
television reception,whichcan bedeterminedbyturningthe equipmentoff
and on, the userisencouragedto try to correctthe interferencebyone ormore
of the following measures:
- Reorientor relocatethereceivingantenna.
- Increasetheseparationbetweenthe equipmentand receiver.
- Connect theequipment into anoutlet ona circuitdifferentfrom that towhichthe receiverisconnected.
- Consultthedealeror anexperiencedradio/TVtechnicianfor help.
PourlesEtats-Unis
Attention : Leschangementsou lesmodificationsqui nesont pas
explicitement approuv_spar la partieresponsabledel'observancepourraientmettrefin au droit del'utilisateur d'utiliser le mat_rieh
Remarque : Cetappareila_t_test_ et il s'est av@_conformeauxlimites
applicables_ unappareilnum@iquedeclasseB,envertude la Partie15
desR_glesde la FCC.Ceslimitessontcon_uesde mani@e_assurerune
protectionraisonnablecontrelesinterf@encesnuisiblesdansune installation
r_sidentielle.Cetappareilproduit, utiliseet peut_mettreune _nergiede haute
fi_quenceet, s'il n'estpasinstall_et utilis_en conformit_aveclesinstructions,
il peutcauserdesinterf@encesnuisiblesauxcommunicationsradio. IIn'y a,
toutefois,aucunegarantieque desinterf@encesneseproduiront pasdansune
[email protected]@ences
nuisibles_ lar_ceptiondela radioou de lat_l_vision,cequ'on peut_tablir
en mettant l'appareilenmarcheet _ l'arr_t, nousencourageonsl'utilisateur
tenter decorriger l'interf@enceparuneou plusieursdesmesuressuivantes:
- r_orienterou d_placerl'antenne der_ception;
- accroitrela s_parationentre l'appareilet le r_cepteur;
- brancherl'appareildansune priseou un circuitautreque celuiauquelle
r_cepteurest branch,;
- consulterunvendeurouuntechnicienradio/TVexp@iment_pourobtenirde I'aide,
ForSP-THBA3,RX-THBA3,SP-THBA3W,CA-THBA1andSP-THBA1
Thisdevicecompileswith RSS-210oflndustry CanadaRules.Operation
issubjectto thefollowing two conditions:(I) this devicemaynotcause
interference,and (2) this devicemustacceptany interference,including
interferencethat maycauseundesiredoperationof thedevice.
PourSP-THBA3,RX-THBA3,SP-THBA3W,CA-THBA1et SP-THBA1
Cetappareilest conformeau r_glementCNR-210de l'industrieduCanada.
L'utilisationdecedispositifest autoris_eseulementauxconditionssuivantes:
(I) il ne doit pasproduiredebrouillageet (2) l'utilisateur dudispositifdoit _tre
pr_t_acceptertout brouillageradio_lectriquere,u, m_mesicebrouillage est
susceptiblede compromettrelefonctionnementdu dispositifi
ForCanada
THISDIGITALAPPARATUSDOESNOTEXCEEDTHECLASSB LIMITSFORRADIO
NOISEEMISSIONSFROMDIGITALAPPARATUSASSETOUTIN THEINTERFERENCE-
CAUSINGEQUIPMENTSTANDARDENTITLED"DIGITALAPPARATUS,"ICES-O03OFTHEDEPARTMENTOFCOMMUNICATIONS.
Pourle Canada
CETAPPAREILNUMERIQUERESPECTELESLIMITESDEBRUITSRADIOELECTRIQUES
APPLICABLESAUXAPPAREILSNUMIRIQUESDECLASSEBPRESCRITESDANSLA
NORMESURLEMATERIELBROUILLEUR;"APPAREILSNUMERIQUES",NMB-O03
EDICTEEPARLEMINISTREDESCOMMUNICATIONS.
ForSP-THBA3,RX-THBA3,SP-THBA3W,CA-THBA1andSP-THBA1
Thisdevicecomplieswith Part 15of the FCCRules.Operationissubjectto the
followingtwo conditions:(I) Thisdevicemaynotcauseharmful interference,
and(2) thisdevicemust acceptanyinterferencereceived,including
interferencethat maycauseundesiredoperation.
Changesormodificationsnotexpresslyapprovedbythemanufacturerfor
compliancecouldvoid the user'sauthority to operatetheequipment.
PourSP-THBA3,RX-THBA3,SP-THBA3W,CA-THBA1et SP-TNBA1
Cetappareilest conforme_ la pattie15desr_glesde laFCC(Federal
CommunicationsCommission).Lefonctionnementestsujetauxdeux
conditionssuivantes: (I) Cetappareilnepeut pascauserd'interf_rences
nuisibles,et (2) cetappareildoit acceptertoute interf@encerevue,y compris
desinterf@encesqui peuventcauserun mauvaisfonctionnement.
Toutchangementou modificationnon express_mentapprouv_sparlefabricant
pourconformit_ peutannuler l'autorit_de l'utilisateur d'utiliser l'appareih
• Manufacturedunder licensefrom DolbyLaboratories.Dolby,ProLogic,
and thedouble-Dsymbolaretrademarksof DolbyLaboratories,• Manufacturedunder licenseunderU,S,Patentnumbers:5,451,942;
5,956,674;5,974,380;5,978,762;6,487,535and other U,S,and
worldwide patentsissuedand pending.DTSand DTSDigitalSurround
are registeredtrademarksandthe DTSIogosandSymbolaretrademarks
of DTS,Inc._>1996-2008DTS,Inc.All RightsReserved.
'_ [European only]Union
[Unioneurop_enneseulement]
[]_ Notes on handling
Important cautions
Installation ofthe System
• Selectaplacewhich is level, dry,and neither too hotnortoo cold;between5°Cand 35°C(41°Fand 95°F),
• Leavesufficientdistancebetweenthe Systemand theTV,
• DonotusetheSystemina locationnearheatsources,or ina placesubjectto
directsunlight, excessivedust,or vibration.
• InstalltheSystemin alocationwith adequateventilation to prevent internal
heatbuildup,Power cord
• Donothandlethe powercordwith wet hands.
• Asmall amount of power isalwaysconsumedwhile the powercordisconnectedto thewall outlet.
• Donotpull onthe cordto unplug the powercord.Whenunpluggingthe
powercord,alwaysgraspand pull the plugsoasnot to damagethecord.
Toprevent malfunctionsof the System
• Thereareno user-serviceableparts inside.Ifanything goeswrong, unplug
thepowercordandconsult yourdealer.
• Donot insertany metallicobjectsor liquidsinto the System.
Safety precautions
Avoidmoisture, water, anddust
Donot placetheSystemin moistor dustyplaces.
Avoidhigh temperatures
DonotexposetheSystemto directsunlightand do notplaceit nearany
heatingdevices.
Whenyou are away
Whenawayon holidayor for otherreasonsfor an extendedperiodof time,
disconnectthepowercordfrom thewall outlet,Do notblockthe vents
Blockingthe ventsmaydamagethe System,
Care ofthe cabinet
• Stainsonthe Systemshouldbewiped offwith asoft cloth. If theSystem
isheavilystained,wipe it with a clothsoakedinwater diluted neutral
detergentandwrungwell, thenwipe cleanwith adrycloth.
• SincetheSystemmaydeterioratein quality, becomedamagedorget its
paint peeledoff, becarefulaboutthe following:
DONOTwipe it forcefully.
DONOTwipe it with thinners, benzinesorotherorganicsolventsincludingdisinfectants.
DONOTapplyanyvolatile substancessuchasinsecticidesto it.
DONOTallow anyrubberor plasticto remain in contactwith it for a longtime.
• Donot placeanythingontop of the System.DoingsomaycausetheSystem
to fall, causingmalfunctioningand/or injury.
• Themanufactureracceptsabsolutelyno liability for anyaccidentsordamage
resultingfrom inadequateassemblyor mounting, insufficientstrengthof
attachment, misuseorabuse,or naturaldisasters.
If water gets insidethe System
Turnthe Systemoff and disconnectthe powercordfrom thewall outlet,
then callthe storewhereyou purchasedthis System.Usingthe Systemin this
condition maycausea fireorelectricalshock.
Checkto makesureyouhaveall of thesuppliedaccessories.If anythingismissing,contactyour dealerimmediately.
• Remotecontrol TH-BA3:RM-STHBA3A(× I)
TH-BAI:RM-STHBAIA(× I)
• ACadaptor(AA-R1902) TH-BA3:(× 2)/TH-BAI: (× I)• ACpowercord TH-BA3:(× 2) /TH-BAI: (× I)
• Lithiumcoin batteryCR2025(× I)Thebattery hasbeeninstalledin the remotecontrol whenshippedfiom
thefactory.• Corefilter (large) TH-BA3:(× 3) /TH-BAI: (× 2)
• Corefilter (small)(× I)*
* TH-BA3only
Center unit (SP-THBA3F / CA-THBA1)
Output power
Center/Front Surround:
Audio section
AnalogInput
DigitalInput*_
Speakersection
Type:
Speaker:
PowerHandlingCapacity:
Impedance:
FmquencyRange:
SoundPressureLevel:
General
PowerSource(DCIN):
ACadaptor(AAR1902):
Dimensions(Wx Hx D):
Mass:
120 W (30 W per channel-measureat
1 kHzOpticalDigital In at full scalesinewave),RMSat 4 _ at 1 kHz,with10% total harmonicdistortion
ANALOG:IVrms/50k£_
DIGITALI,DIGITAL2:21 dBm to 15dBm
(660nm ±30 nm)
Full RangeBassReflexType(Magnetically
ShieldedType)8cm (3 3/16")cone><4
30W
CenterSpeakers:84Hzto 22kHz
FrontSpeakers:84Hzto 22kHz
CenterSpeakers:82dB/W.m
FrontSpeakers:82dB/W.m
DC19V===3.37A
Input:AC110240V _ 1.50.9A,50/60Hz
Output:DC19V_ 3.37A900mm ×125mm× 85mm
(35 7/16"x 4 13/16"x 3 3/8")
3.5 kg (7.8 Ibs)
Powered subwoofer (SP-THBA3W / SP-THBA1)
Outputpower 100W,RMSat3 _ at4SHz,with 10%total harmonicdistortion
Type: 1WayBassRetie×Type
Speaker: 16cm (6 5/16")conex: 1
PowerHandlingCapacity: lOOW
Impedance: 3 £_
FrequencyRange: 45Hzto 5kHzSoundPressureLevel: 82dB/W.m
PowerRequirements: AC120V_.-, 60Hz
PowerConsumption: 30 W (duringoperation)
0.8W (inStandbymode)
Dimensions(W x H× D): 215mm × 352mm× 254mm
(8 1/2"x 13 7/8"x 10")
Mass: S kg(11 Ibs)
Wireless receiver unit (RX-THBA3) *_
Output power: 30 W per channel,RMSat 4 _ at
1kHz,with 10%total harmonicdistortion
PowerSource(DCIN): DC19V_ 337 A
ACadaptor(AAR1902): Input:AC110 240V_-_. 1.50.9A,50/60Hz
Output:DC19V---_=3.37A
Dimensions(W x H× D): 186mm x 30.8mm x 300mm
(7 3/8"xl 1/4"xll 13/16")
Mass: 0.53kg (1.2Ibs)
Surround speaker (SP-THBA3S) *_
Type: FullRangeBassRetie×Type
Speaker: 8cm (3 3/16")conex 1
PowerHandlingCapacity: 30W
Impedance: 4 £_
FrequencyRange: 84 Nzto 22kNzSoundPressureLevel: 82dB/W.m
Dimensions(W x H× D): 105mm × 118mm× 98 mm
(4 3/16"×4 11/16"×3 7/8_
Mass: 0.46kg(1.01[bs)each
*_@rrespondlYlgmL#le_rPd/vl,PolbyDigital,_ndDTS(will s_mpllYlgfrequency-- 32kHz,4#,l kHz,48kHz)
*2On/yfor THBA3
Designs& specificationsaresubjectto changewithout notice.
:Onlyfor TH-BA3/ _ :Onlyfor TH-BA1
DONOTconnectthe power corduntil all other connectionshavebeen made.
Prepare the Remote Control
Whenyouusethe remotecontrol for thefirst time, pullout the insulationsheet.
Insulationsheet
If therangeor effectivenessof the remotecontrol decreases,replacethe battery.
To Replace the Battery in the Remote Control
Insertthe battery into theremotecontrol bymatchingthe polarities(+ and-)
correct,y prnductnomber:C,202S Lithiumcoinbattery ........................................................
II Pinch the side ofthe battery case.
2 Pull out the battery caseand insert 2
the battery by matching the polarities.
NOTE
• Store the battery in a place where children cannotreach. Ifa child accidentally
swallows the battery, consulta doctorimmediately.• Topreventthebatteryfromoverheating, cracking,orstartingafire:
Donot recharge, short, disassemble orheat the battery, or disposeof it in afire.
Donot leave the battery with othermetaRicmaterials.Wrapthe battery with tape and insulate when throwing away orsaving it.
• Donotpoke the battery with tweezers orsimilartools.• Disposeof the battery in theproper manner, accordingto federal,state, and
localregulations.
CAUTION:
Dangerof explosionif battery is incorrectlyreplaced.
Replaceonly with the sameor equivalenttype.
ForUSA-CaliforniaOnly
Thisproductcontainsa CRCoinCellLithium Batterywhichcontains
Perchloratematerial--special handling mayapply.
Seewww.dtsc.ca.gov/hazardouswaste/perchlorate
Speaker layout
Installthe speakerson afiat and levelsurfaceto ensurethe bestsoundquality.
• Thesoundmaybeaffecteddependingon the locationinwhichyou install
them. Toavoidsuchissues,changethe locationandorientation of the
speakers.
• Installthespeakersleavingan appropriatedistancebetweenthem.
• Ifyou install thespeakersnearthe TV,colordistortionmayoccur.Toprevent
this,turn off theTV'smain poweror unplug it beforeinstallingthespeakers.
Waitat least30minutes beforeturningon theTV'smainpoweragain.
• If the TVisstill affected,movethe speakersfurtheraway.
TypicalinstallationConnectthe wirelessreceiver
unit to thesurroundspeakers.
NOTE
• Toobtain the bestpossible
soundfrom the System,
install aRspeakers except thesubwoofer at the same distance,
from theRsteningposition. See
the typical installationnext.
• Ifyourspeakerscannotbeinstalledat the same distance
from the listening position,you
canadjust thespeaker distance
of eachspeaker by remote
control.See "Adjustingthe speaker distance"below.
Installing on the wall
Youcaninstall thecenterunit and surroundspeakers*onthe wall,
Ex.:centerunit
A: Minimum6.5mm
B: Maximum10mmC: Maximum6mm
D: O4mm (screwdiameter)
CAUTION
• Thecenterunitweighsappmximately3.Skg(7.SIbs)andthesurround
speakers* weighs approximately 0.5 kg (1.3 Ibs)each. Sufficient caremustbe taken when installing them on the wal!toprevent any accidents causedby
their falling oK
• Usescrewswhicharecompatiblewiththestrengthandmateria!ofthepiRaror
wal!to prevent the center unit and surroundspeakers* from fallingo
• DonotinstaRthe center unitandsurroundspeakers* onto aplywoodor
plasterboard wal!;otherwise, they wiRfaRand sustain damage.
• WheninstaRingthecenterunitandsurroundspeakers*onthewaR;
Besure to have them installed on the wal! by qualifiedpersonneL
Caremust be taken when selectinga locationfor installation on the wal!.
Injurytopersonnel ordamage to equipment may result if the installed units
interferewith daily activities.
ACadaptor should not behanging/put above of any other items. It is
acceptableto place the ACadaptor on the flat floor only.
Recommended mounting surface: Wooden studs. If themount isto be
installedon any surface other than wooden studs, use suitable hardware
(which is commerciallyavailable).
* TH-BA3only
Attaching speaker stands
Youcanusethe speakerstands(notsupplied)for installation.
Usethisholeto attachStand
aspeakerstandusing
Connectto RX-THBA3
speakerterminal
Screw(not
supplied)
NOTE
• When attaching aspeakerstand, referto the instructionsofthespeakerstandsyou purchased.
• RefertothesuppRedinformationsheetforwirearrangementandcontainingthe speaker cords.
CAUTION
• Donot instaf! thesurround speakers in a place where they may interferewith
daily activities. Injurytopersonnel ordamage to equipment mayresult if the
surround speakers are installedin such a place.
Connecting external componentsYoucanconnectanalogcomponentsto theANALOGterminaland digital
componentsto the DIGITAL1and DIGITAL2terminals.
Rearof thecenterunit
mp_Connecting the power cord
ConnectthesuppliedACadaptorto theDCINjacksonthe centerunit and
wirelessreceiverunit. ThenconnectthesuppliedACpowercordto the AC
adaptor, andplug it in awall outlet.
• Plug inthe powercordof thesubwooferto awall outlet.
ConnectthesuppliedACadaptorto theDCINjack onthecenterunit. Then
connectthesuppliedACpowercordto theACadaptor,and plugit inawalloutlet.
• Plug inthe powercordof thesubwooferto awall outlet.
CAUTION
• Oisconnectthepowercordsbeforedeaningormovingthespeakers.
Using the core filterAttachthe providedcorefilter to thepowercordandthe externalcomponentscordto reduceinterference.
1 coreReleasethe stopper ofthe_filter. _C_
2 Run the cable through the core filter, and wind the cable
firmly once inside the cutout of the core filter as shown in the
illustration.
Powercord
External
c°mp_noreds'_
Surround
speaker_ "_ /" _'___
cords×` 5 cm "Ti'
* Youcanwindtwo externalcomponentscordsorsurroundspeakercords
together.
3 Closethe core filter until it dicks shut.
CAUTION
• Donot damage the cordby applying excessive force
when winding.
mp_Setting up the subwoofer andwireless receiver unit*
ThisSystemisequippedwith awirelesssubwooferandreceiverunit*. Whenyouusethemfor thefirst time, activatethewirelesspairing.
Referto the suppliedinformationsheet--'Activate wirelesspairing."
* TH-BA3only
NOTE
• Thewirelesspairingisnot
canceledeven after the ACplug
has beenpulled out.
:Only for TH-BA3 / _ :Only for TH-BA1
TH-BA3 TH-BAI
Basic operation
Turning on/off the power
Press(b/i.
• Youcanalsousethe powerbutton on thefront panel.
NOTE
• Asmafiamountofpowerisconsumedevenwhenthepoweristurnedoff
(standby mode). Duringstandby mode, the STANDBYlamp on the front pane!lightsup. Unplugthe power cordfrom the ACoutlet to turn thepower off
completely.• Youcan alsoturn on the System bypressing one of the input buttons (DIGITAL
L DIGITAL2 orANALOG).
Selecting the input source
Pressone of the input buttons: DIGITAL 1, DIGITAL2 or ANALOG.
DI (DIGITALI), D2 (DIGITAL2)or AN(ANALOG)appearson thedisplayfor 2seconds.
• Youcanalsousethe input button onthe front panel.
NOTE
• Theindicator!ampoftheselectedinputsourcelights.
Adjusting the volume
PressVOLUME+/- (0 to 40).
• Youcanalsousethevolumebuttonson thefront panel.
CAUTION
• Setthe volume to theminimum levelbeforestarting anyinputsource. Ifthe
volumeis set to a high level,the sudden blast ofsound may damage your
hearing and blow out the speakers.
Turning off the sound temporarily
PressFADEMUTING.
• Torestorethe sound,pressthe button againoradjustthe volume.
Changing the display brightness
PressDIMMER.
Eachtime you pressthe button, the LEDbrightnesschangesasfollows:normal_ dim _ off
Making sound clearer (Only for Dolby Digital
and DTS)
Youcanenjoy low level recordedsoundclearlyevenat a lowvolume
level--Dynamic RangeCompression.
PressDRC.
Eachtime you pressthe button, the soundisenhancedthe effectasfollows:
OF(off),,_ MD(middle),,_ MX(maximum)
i3j
TheillustrationisofTH-BA3.
Buttonsandlampsonthe front panel
ili _)/l(power) buttonand STANDBYlamp
Turnson/offthe System.
• STANDBYlamp lightsup while theSystemisturned off.
i2 Input button and input source indicator lamps
Selectsaninput source:"DIGITALI," "DIGITAL2"or"ANALOG."
• Theindicatorlampfor the selectedinput sourcelights up.
* TH-BAI'sdisplayis2digit,
i 3 Surroundbutton and surround indicator lampsSelectsasurroundmode:"SURROUNDI," "SURROUND2" orSURROUND
OFF.
• Theindicatorlamp forthe selectedsurroundmode lights.
• TheDOLBYPROLOGICII lamp lightsup when:
- surroundisactivatedwith anANALOGinput sourceselected.
- surroundisactivatedand aDIGITALinput sourcewith 2channelaudioformat.
i4 Remotesensor
Receivesthesignalfrom the remotecontrol.
i5] Digitalsignal format lamps
Showsthe digital signalformat of the incomingsignalwhen "DIGITALI"
or"DIGITAL2" isselectedasthe input source.Eachlamp lights when:
- DOLBYDIGITAL: aDolbyDigitalsignalcomesin.
- DTS: aDTSsignalcomesin,- PCM: aLinearPCMsignalcomesin,
i6_ Display
Showsthevolumelevel, speakernameand output levelof eachspeaker.
Showsthe volumelevel.
iTi Volume buttons
Adjuststhe volumewithin the rangeof Oto 40.
Adjusting the output level of the
speakersYoucanadjusttheoutput levelwithin the rangeof-6 dBto +6 dB.
I PressSPI( LEVELch repeatedly to select the target speaker.
Eachtime you pressthebutton, thespeakerchangesasfollows:
FL(Frontleft surroundspeaker)_ CT(Centerspeaker)FR(Frontright surroundspeaker)_ SR(Surroundright speaker)
SL(Surroundleft speaker)_ SW(Subwoofer)_ Backto thebeginning
2 PressSPK LEVEL+/- to adjust the output level while the
indication is displayed.
PressSPKLEVEL+/- for the corresponding speaker.
- SUBWOOFER: Adjuststhe output levelof thesubwoofer.
- CENTER: Adjuststhe output levelof thecenterspeakers.
- SURROUND: Adjuststhe output levelof thefront surroundspeakers.
_@_Using the surround modeYoucanlistento amorerealisticsoundthan stereosoundusingsurround.Availablesurroundmodesareasfollows:
- SURROUNDI: Suitableforthe reproductionof multi-channelsources.$I
appearson thedisplaywhenselected.
- SURROUND2: Suitableforthe reproductionof anystereomusicsources.
$2 appearsonthe displaywhen selected.
• Theindicatorlamp of theselectedmode lights.
PressSURROUNDMODErepeatedly to select the desired mode.
Thesurroundmodechangesalternately.
• Todeactivate,pressOFF.OFappearson thedisplay.
PressSURROUNDMODE1 or SURROUNDMODE2.
• Todeactivate,pressOFF.OFappearson thedisplay.
Adjusting the speaker distanceByadjustingthe speakerdistance,youcanenjoytheoptimum surroundsound
even if it ishardto install thespeakersasshowninthe typicalinstallationabove.
1 PressDISTANCEchrepeatedlyto selectthe desiredspeaker.
Thespeakerchannelhasbeenchangedin the followingsequence:
FT(Frontspeaker)_ SL(Surroundleft speaker)_ SR(Surroundright speaker),,_ SW(Subwoofer),,_Back to the beginning
2 PressDISTANCE+/- to adjust the distance from the listening
position to the selected speaker.
• Fortheexamplebelow,setthe speakerdistanceasfollows:
Subwoofer(SW)
Centerunit(FT) ..... - -. ' 3.0m(I0 ft)2.4m(8 ft)
"_'"_ " " -3.0m (lOft)
" / ," ,/_", ", ': 'i .2.4m(8ft)
! ._,"//, : 2.1m (Tft)
Surroundspeaker(SL) Surroundspeaker(SR)
27m(9ft) 2.7m(9 ft)
• Youcanadjustthespeakerdistancefrom 0,3m to 9,0m, Eachtime you press
the button, thedistancechangesby0,3m,
_ Listening to the test tonePressTESTTONEto monitor the test tone.
Thetesttone comesoutof the speakersinthe followingsequence:
FL(Front left surroundspeaker)_ CT(Centerspeaker)_ FR (Front
right surroundspeaker)_ SR(Surroundright speaker)
SL(Surroundleft speaker)_ Backto thebeginning
Notest tonecomesout of thesubwoofer.
• PressSPKLEVEL+/- to adjustthe output levelwhile monitoringthe test
toneof thesespeakers.
• Tostopmonitoring the testtone,pressTESTTONE.
Ifyou haveaproblemwith this System,checkthis list for apossiblesolution
beforecallingfor service,
POWER
Power doesnot comeon.
"--*Thepowercordisnot insertedsecurely.Plugit insecurely.
REMOTE CONTROL
Theremote control doesnot work.
Thebattery isexhausted.Replacethebattery.
---*Sunlight isshiningdirectlyon the remotesensor.Hidethe remotesensor
from directsunlight.
---*Thepath betweenthe remotecontrol andthe remotesensoronthe front
panelisblocked.
Pointtheremotecontrol at the remotesensoronthe front panel.
Signalscannot reachthe remotesensor.Movecloserto the unit.---* Pullout the insulationsheet.
SOUND
Soundsare sometimes interrupted.
---* Radiowave connectionsmaybeinterrupted.Changethelocationand
orientation of the speakers.
No soundfrom speakers.
"--*Thewirelessconnectionshavenotbeenactivatedcorrectly.Checktheconnection.
--* Thesoundhasbeenturned off temporarily.PressFADEMUTINGonthe
remotecontrolor adjustthevolumebypressingVOLUME+/-.
Radio wave reflections
TheSystemisconnecteddirectly byradiowaveswhichare reflectedby
walls, furniture andbuildings, If the Systemcannotreceivethewaves
properly,movethe Systemto obtain better reception,
Radiowave receptionmayalsobeinterrupted bypeoplemovingbetweenthe units,