the confidential resume of professional qualifications
TRANSCRIPT
The Confidential Resume Of Professional Qualificationsfor
El-Sayed El-Araby Moh'd El-Hussieni
C.V.INDEX
Personal data
Professional Objective
Summary Of Qualifications
Professional Experience • From 10/11/91 up till now • From 08/03/82 up to 09/11/91 • From 01/07/81 up to 03/03/82 • From 01/01/79 up to 30/06/81
Training Courses
Personal DataName : El-Sayed El-Araby Moh'd El-Hussieny.
Citizenship : Egyptian.
Marital status : Married - Four Children.
E- Mail : [email protected]
Mobile No. : 00966502103572.
Religion : Muslim.
Languages : Very good written, read and spoken English.Qualifications : Bachelor of Mechanical Engineering, Helwan University -
Faculty of Engineering and Technology – June,1978Computer : Ms Office and AutoCAD.
PROFESSIONAL OBJECTIVE
I'm looking for an assignment of Oil & Gas offshore or onshore Mechanical Engineer where over 30 years of mechanical engineering can be utilized, an opportunity utilizing well heads and production platforms, rotating and static equipment, piping & associated valves, sea berths [C.A.L.M (S.P.M) 62,000 bbl/hrs.] Type Single Buoy Mooring & Multi Point Mooring (M.B.M.), Navigation Buoys, laying pipelines, tie-in oil, gas & water injection flow lines, piping modification & relocation, follow up the contractors work, all paper work such as work schedules, scope of work, drawing, budget preparation, materials preparation & procurement [stock items, min. & max. stock, direct charge & insurance items], tender documents and contracting negotiations.
A position where resourcefulness and problem solving ability can directly contribute to profitability.
PROFESSIONAL EXPERIENCE
From 10/11/91 up till now :
• Offshore Mechanical Field Eng. And promoted to Senior Offshor Maintenance Planner at Aramco Gulf Operations & Kuwait Gulf Company (KJO) and my duties are:• All piping work and laying submarine pipelines.• Static & dynamic Mechanical equipment.• Loading facilities [S.P.M-C.A.L.M. Single Buoy Mooring and Multi Buoy Mooring], all
maintenance works, overhauling, [dry-docking], seal replacement and hoses replacement.• Follow up all diving activities.• Boat landing and structures repair.• Preparing of drawing, scope of work, material procurement, follow up contractor work.• Laying submarine power and control cables.• Maintenance and repair for navigation buoys.• Supervise offshore painting operations and related materials , contract , inspections and all
paper works including schedules.• All material procurement for the above mentioned items.• Training for the new employees.
From 08/03/82 up to 09/11/91 :
• Commissioning and start up, preparation of as built drawing, project documents and certificates, punish lists, and performance test.
• All piping work and laying pipelines oil & gas.• Installation and maintenance for mechanical equipment such as
transfer pumps, instrument air compressor, fire fighting pumps, chemical injection pumps well kill package, test separators, knock out drums, launchers & receivers, cranes, drain system, survival craft, slag catcher and boat landing repairs.
• Loading facilities [S.P.M-C.A.L.M. Single Buoy Mooring and Multi Buoy Mooring], all maintenance works, overhauling, [dry-docking], seal replacement and hoses replacement.
• Follow up all diving activities.• Maintenance and repair for navigation buoys.• All material procurement for the above mentioned items.• All paper work such as planning, work schedule, scope of work,
work permits & daily, weekly and monthly report.
Offshore Mechanical Eng.
In addition, Promoted To Off
Shore Mechanical Section Head, (SUCO), A joint
Venture company between Shell, BP,
EGPC and Demenix - Egypt, my duties were all mechanical works for offshore well
head & production
platforms and loading facilities:
From 01/07/81 up to 03/03/82
Maintenance Eng., Potable Water Pump Station Workshop of Kaliubia Governorate, routine maintenance, troubles shooting and overhauling.
From 01/01/79 up to 30/06/81
Technical Officer, army force, maintenance and trouble shooting for vehicles, heavy equipment and diesel generators.
TRAINING COURSES
Oil and gas induction course, O.T.S co.Gas turbine, Tomsen co., Frame [5].Commercial diving course.Safety course sweet and sour oil & gas.Three stage compressor for gas lift, [I.R].Three phase desalter, NATCO.Cathodic protection.Water injection.Piping and associated valves.Marine hoses for loading facilities.SPM and tankers loading.Material handling course.Gas industry [LPG and gas injection].
Personal And Professional References Available Upon Request.I affirm the truth in all particulars given above.
Best regards.
Signature :
Date : 26 June, 2011
Some Certificates
