technical data sheet - silicones silam

Technical Data Sheet

SILAM CON

• High electrical conductivity.• Low volume resistivity.• Resistance to high temperatures.• Colour: only available in black.• Good mechanical and electrical properties.• Hardness: From 50 to 70 Sh A.• Operating temperature: -60 to 200 ºC.

Electrically conductive silicone compounds.

Warning to users

The information contained in this document is given in good faith based on our current knowledge. It is only an indication and is in no way binding, particularly as regards infringement of or prejudice to third party rights through the use of our products.

SILAM SILICONES GUARANTEES THAT ITS PRODUCTS COMPLY WITH ITS SALES SPECIFICATIONS.

This information must on no account be used as a substitute for necessary prior tests which alone can ensure that a product is suitable for a given use. Users are responsible for ensuring compliance with local legislation and for obtaining the necessary certifications and authorisations. Users are requested to check that they are in possession of the latest version of this document and SILICONAS SILAM is at their disposal to supply any additional information.

Technical Data

PROPERTIES METHOD UNITS

Hardness DIN 53505 Sh A (+/-5) 50 60 70

Density DIN EN ISO 1183-1A g/cc (+/-0.03) 1.10 1.12 1.16

Tensile Strength DIN 53504 S 1 Mpa >5.5 >5.5 >5.5

Elongation DIN 53504 S 1 % >350 >300 >200

Volume resistivity DIN IEC 93 Ohm.cm 10+/-2 3+/-0.5 4+/-1

Material: High consistency silicone rubber (HCR) for high temperature vulcanization (HTV).

PROCESSING-VULCANIZATION Compression and/or injection mouldingAutoclaveExtrusion

Accessories for cables, interconnectors, keyboards, components for high voltage insulatorsSheetsProfiles and tubesRollers

ElectricalTransportation (automotive, rail, aviation, naval)Industrial machinery Household appliances

PACKAGING/DOSAGE

*All data are obtained after press curing with crosslinker C1 15min 165 ºC , 4hr 200 ºC. / This information serves only as a guide and should not be used to create specifications.

SILAM CON is supplied in 20, 270 or 540 kg. cardboard boxes. It can be supplied preformed in:• Sheets available in different thicknesses.• Endless strips (several strip dimensions).• Blocks.

The silicone compounds should be stored in a closed area and at a temperature below 30°C.

The expiry date is indicated on the label. Product may exhibit altered characteristics if used after expiration date.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CharacteristicsDescription

APPLICATIONS

SECTORS

STORAGE / SERVICE LIFE


SILAM FIRE

• Main feature: low flammability and flame-resistant.• Low smoke emissions and low toxicity.• Good mechanical properties.• Available in a wide range of colours.• Operating temperature: -60 to 200 ºC (can withstand

temperature peaks of up to 250 ºC).• Hardness: From 40 to 80 Sh A.

Silicone FLAME-RESISTANT compounds in which the main feature is its low flammability. Compounds are suitable for all types of vulcanization processes.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 40 50 60 70 80

Density DIN EN ISO 1183-1A g/cc (+/-0.03) 1.13 1.14 1.16 1.19 1.21

Breaking load DIN 53504 S 1 Mpa >8 >8 >8.5 >8.5 >7

Elongation DIN 53504 S 1 % >400 >400 >300 >300 >200

Tear Strength ASTM D624-B N/mm >16 >18 >18 >18 >12

Limiting Oxygen Index (LOI) ISO 4589 % > 27


SECTORS

Compression and/or injection mouldingExtrusion CalenderingAutoclave

Brackets, hoses, seals, dampers, all type of technical partsSheets ProfilesTubesSilicone coated rollers

Transportation (automotive, rail, aviation, naval)Household appliancesConstructionIndustrial machinery

PACKAGING/DOSAGE



SILAM CON is supplied in 20, 270 or 540 kg. cardboard boxes. It can be supplied preformed in:• Sheets available in different thicknesses.• Endless strips (several strip dimensions).• Blocks.

The silicone compound should be stored in a closed area and at a temperature below 30°C.


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PROCESSING-VULCANIZATION

APPLICATIONS



SILAM FL

• High chemical resistance to hydrocarbons and mineral oils.• Good mechanical properties.• Operating temperature: -60 to 200 ºC.• Available in a wide range of colours.• Hardness: From 40 to 70 Sh A.

Fluorosilicone compounds suitable for all kinds of vulcanization processes. Unlike silicone compounds, fluorosilicone compounds are known for their chemical resistance to mineral oils and aliphatic hydrocarbons.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 40 50 60 70

Density DIN EN ISO 1183-1A g/cc (+/-0.03) 1.40 1.45 1.48 1.49

Tensile Strength DIN 53504 S 1 Mpa >6.5 >8 >8.5 >7

Elongation DIN 53504 S 1 % >350 >400 >300 >160

Tear Strength ASTM 624 B N/mm >15 >15 >18 >15


SECTORS



Transportation (automotive, rail, aviation, naval)Industrial machineryPetrochemical industry

PACKAGING/DOSAGE



SILAM FL is supplied in 20, 270 or 540 kg. cardboard boxes. Fluorosilicone can be supplied preformed in:• Sheets available in different thicknesses.• Endless strips (several strip dimensions).• Blocks.

The silicone compound should be stored in a closed area and at a temperature below 30°C.


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS



SILAM FOOD GR

• The products which are properly postcured are suitable for food handling according to CFR 21/177.2600 FDA regulation and section "XV Silicones" of the BfR.

• Good mechanical properties.• Available in a wide range of colours.• Good transparency.• Operating temperature: -60 to 200 ºC.• Hardness: From 20 to 90 Sh A.


Food Grade silicone compounds suitable for all types of vulcanization processes. Good mechanical properties, flexibility and transparency.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 20 30 40 50 60 70 80 90

Density DIN EN ISO 1183-1A g/cc (+/-0.03) 1.1 1.11 1.12 1.13 1.14 1.18 1.21 1.22

Tensile Strength DIN 53504 S 1 Mpa >6.5 >8 >8.5 >8.5 >9 >9 >7.5 >7

Elongation DIN 53504 S 1 % >800 >500 >450 >400 >350 >350 >250 >200

Tear Strength ASTM 624 B N/mm >18 >18 >18 >20 >22 >20 >15 >15


SECTORS


Moulds in contact with foodSheets ProfilesTubesGasketsRollers

FoodAgriculturalHousehold appliancesMachinery for the food industry

PACKAGING/DOSAGE


SILAM FOOD GR is supplied in 20, 270 or 540 kg. cardboard boxes. It can be supplied preformed in:• Sheets available in different thicknesses.• Endless strips (several strip dimensions).• Blocks.

The compound should be stored in a closed area and at a temperature below 30°C.


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS



SILAM GAZ

• Good mechanical properties.• Available in a wide range of colours.• Operating temperature: -60 to 200 ºC.• Hardness: From 40 to 70 Sh A.

Silicone compounds for contact with gas particularly suitable for manufacturing gaskets and membranes for gas equipment using gaseous fuel in accordance with the EN-549 standard. Mixtures suitable for all kinds of vulcanization processes.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) <45 From 45 to 60 >60

Tensile Strength DIN 53504 S 1 Mpa >5 >7 >7

Elongation DIN 53504 S 1 % >125 >125 >125

C. SET ISO 815 (168 h, 175 ºC) % <40 <40 <40


PROCESSING-VULCANIZATION Compression and/or injection mouldingExtrusion CalenderingAutoclave

Gaskets and membranes for equipment using gaseous fuel Household appliancesIndustrial machinery

PACKAGING/DOSAGE

*Other properties: meet the requirements of standard EN-549.*All data are obtained after press curing with crosslinker C1 15min 165 ºC, 4hrs. 200 ºC. / His information serves only as a guide and should not be used to create specifications.

SILAM GAZ is supplied in 20, 270 or 540 kg. cardboard boxes. It can be supplied preformed in:• Sheets available in different thicknesses.• Endless strips (several strip dimensions).• Blocks.

The compounds should be stored in a closed area and at a temperature below 30°C.

The expiration date is indicated on the label. Product may exhibit altered characteristics if used after expiration date.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Requirements of the material for manufacturing gaskets:

APPLICATIONS

SECTORS




SILAM GP

• Good mechanical properties.• Good transparency.• Available in a wide range of colours.• Hardness: From 20 to 90 ShA.• Operating temperature: -60 to 200 ºC.

Standard silicone compounds suitable for all kinds of vulcanization processes. Good mechanical properties, flexibility and transparency.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 20 30 40 50 60 70 80 90


Tensile Strength DIN 53504 S 1 Mpa >6.5 >8 >8.5 >8.5 >9 >9 >7.5 >7

Elongation DIN 53504 S 1 % >800 >500 >450 >400 >350 >350 >250 >200

Tear Strength ASTM 624 B N/mm >18 >18 >18 >20 >22 >20 >15 >15





PACKAGING/DOSAGE


SILAM GP is supplied in 20, 270 or 540 kg. cardboard boxes. It can be supplied preformed in:• Sheets available in different thicknesses.• Endless strips (several strip dimensions).• Blocks.

The silicone compounds should be stored in a closed area and at a temperature below 30°C.


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS

SECTORS



SILAM HIGHP

• Excellent mechanical properties, particularly the tear strength.• Excellent transparency.• Available in a wide range of colours.• Operating temperature: -40 to 200 ºC. Mixtures that can

withstand up to 250 °C can be made.• Hardness: From 30 to 70 Sh A.

Silicone compounds with excellent mechanical properties, suitable for all kinds of vulcanization processes. Excellent tear strength across the range of hardnesses

Warning to users




Technical Data

Hardness DIN 53505 Sh A (+/-5) 30 40 50 60 70


Tensile Strength DIN 53504 S 1 Mpa >8.5 >9 >9 >9.5 >9

Elongation DIN 53504 S 1 % >650 >500 >500 >500 >450

Tear Strength ASTM 624 B N/mm >24 >28 >32 >35 >30





PACKAGING/DOSAGE


SILAM HIGHP is supplied in 20, 270 or 540 kg. cardboard boxes. It can be supplied preformed in:• Sheets available in different thicknesses.• Endless strips (several strip dimensions).• Blocks.



. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS

SECTORS

ALMACENAJE / CADUCIDAD



SILAM HT

• Several product ranges depending on the maximum operating temperature required:

• Resistant to 230 °C. • Resistant to 250 °C. • Resistant to 300 °C.• Good mechanical properties.• Available in a wide range of colours.• Hardness: From 20 to 80 Sh A.

Silicone compounds resistant to high temperatures (up to 300 ºC) and suitable for all kinds of vulcanization processes.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 20 30 40 50 60 70 80

Density DIN EN ISO 1183-1A g/cc (+/-0.03) 1.1 1.11 1.12 1.13 1.14 1.18 1.21

Tensile Strength DIN 53504 S 1 Mpa >6.5 >7 >8 >8.5 8.5 >9 7.5

Elongation DIN 53504 S 1 % >800 >500 >450 >400 >350 >300 >250

Tear Strength ASTM 624 B N/mm >15 >15 >12 >18 >18 >19 >15





PACKAGING/DOSAGE


SILAM HT is supplied in 20, 270 or 540 kg. cardboard boxes. It can be supplied preformed in:• Sheets available in different thicknesses.• Endless strips (several strip dimensions).• Blocks.



. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS

SECTORS



SILAM MAG

• Detectable by metal detectors.• Good mechanical properties.• The products which are postcured are suitable for food

handling according to CFR 21/177.2600 FDA regulation and section "XV Silicones" of the BfR.

• Available in a wide range of colours.• Operating temperature: -60 to 200 ºC.• Hardness: From 30 to 80 Sh A.

Silicone compounds detectable by magnetic fields suitable for all kinds of vulcanization processes.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 30 40 50 60 70 80

Density DIN EN ISO 1183-1A g/cc (+/-0.03) 1.11 1.12 1.13 1.14 1.18 1.21

Tensile Strength DIN 53504 S 1 Mpa >8 >8.5 >8.5 >9 >9 >7.5

Elongation DIN 53504 S 1 % >500 >450 >400 >350 >350 >250

Tear Strength ASTM 624 B N/mm >18 >18 >20 >22 >20 >15

High consistency silicone rubber (HCR) for high temperature vulcanization (HTV).

PROCESSING-VULCANIZATION Compression and/or injection mouldingExtrusion Autoclave

Brackets, hoses, seals, dampers, all type of technical partsSheets ProfilesTubesSilicone coated rollersAutomation of assembly processes

Transportation (automotive, rail, aviation, naval)Household appliancesConstructionIndustrial machinery Machinery for the food industry

PACKAGING/DOSAGE


SILAM MAG is supplied in 20, 270 or 540 kg. cardboard boxes. It can be supplied preformed in:• Sheets available in different thicknesses.• Endless strips (several strip dimensions).• Blocks.



. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS

SECTORS



SILAM OIL

• Very good resistance to mineral oils.• Good mechanical properties, especially compression set.• Resistant to high temperatures. Operating temperature: -60 to 200 ºC.• Available in a wide range of colours (except transparent).• It doesn’t need postcuring to obtain good mechanical properties.• Hardness: From 40 to 80 Sh A.

Silicone compounds with very good resistance to mineral oils. Good elasticity and low compression set

Technical Data


Hardness DIN 53505 Sh A (+/-5) 40 50 60 70 80


Tensile Strength DIN 53504 S 1 MPa >6.5 >7 >7 >7 >7

Elongation DIN 53504 S 1 % >380 >380 >350 >250 >150

C. Set (22 h, 175 ºC) ASTM 815 B % <10 <10 <10 <15 <20


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


PROPERTIES 40 Sh A 50Sh A 60 Sh A 70 Sh A 80Sh A

Hardness (Sh A) 41 51 58 68 81

Density (MPa) 7.20 9.20 7.90 8.40 7.60

Elongation (%) 401 476 362 274 162

Original values for ageing in oils


Resistance to IRM OIL 901 (72h, 150 ºC)

Hardness (Sh A) 38 48 54 64 80

∆ Hardness (Sh A) -3 -3 -4 -4 -1

CR (MPa) 7.60 9 8.10 7.70 7.00

∆ CR (%) 5.6 -2.2 2.5 -8.3 -7.9

Elongation (%) 476 501 377 268 152

∆ Elongation (%) 19 5.3 4.1 -2.2 -6.2

∆ Volume (%) 6.1 6 5.3 5 4


SILAM OIL

Warning to users





Brackets, hoses, seals, dampers, all type of technical partsSheets ProfilesTubesRollers. Excellent qualities for manufacturing high-quality rollers (easy grinding)


PACKAGING/DOSAGE


SILAM OIL is supplied in 20, 270 or 540 kg. cardboard boxes. It can be supplied preformed in:• Sheets available in different thicknesses.• Endless strips (several strip dimensions).• Blocks.

The compounds should be stored in a closed area and at a temperature below 30°C.


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

APPLICATIONS

SECTORS



Resistance to IRM OIL 903 (72h, 150 ºC)

Hardness (Sh A) 32 37 44 51 66

∆ Hardness (Sh A) -9 -14 -14 -17 -15

CR (MPa) 4.00 5.50 6.60 7.40 7.00

∆ CR (%) -44 -40 -17 -12 -7.9

Elongation (%) 267 292 296 236 140

∆ Elongation (%) -33 -39 -18 -14 -14

∆ Volume (%) 55 52 46 41 31


Resistance to LUBRIZOL OS 206 304 oil (504hr, 150 ºC)

Hardness (Sh A) 24 32 38 51 70

∆ Hardness (Sh A) -17 -19 -20 -17 -11

CR (MPa) 4.20 5.00 5.80 6.30 6.40

∆ CR (%) -42 -46 -27 -25 -16

Elongation (%) 404 398 407 251 148

∆ Elongation (%) 0.7 -16 -12 -8.4 -8.6

∆ Volume (%) 25 24 22 20 15


SILAM PHARMA

• The products that are properly postcured are suitable for pharmaceutic grade applications according to USP Standards Class VI and ISO 10993.

• Good mechanical properties.• Available in a wide range of colours.• Good transparency.• Operating temperature: -60 to 200ºC.• Hardness: From 20 to 80 Sh A.

Silicone compounds suitable for medical grade applications in accordance with USP Standards Class VI and ISO 10993. Suitable for all types of vulcanization processes.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 20 30 40 50 60 70 80


Tensile Strength DIN 53504 S 1 Mpa >6.5 >8 >8.5 >8.5 >9 >9 >7.5

Elongation DIN 53504 S 1 % >800 >500 >450 >400 >350 >350 >250

Tear Strength ASTM 624 B N/mm >18 >18 >18 >20 >22 >20 >15



Sheets ProfilesTubesGaskets

Pharmaceutic

PACKAGING/DOSAGE


SILAM PHARMA is supplied in 20, 270 or 540 kg. cardboard boxes. It can be supplied preformed in:• Sheets available in different thicknesses.• Endless strips (several strip dimensions).• Blocks.



. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS

SECTORS



SILAM PT

• The products which are postcured are suitable for food handling according to CFR 21/177.2600 FDA regulation and section "XV Silicones" of the BfR.

• The vulcanizing cycle is significantly faster than that of silicones that vulcanize with peroxides.

• Special features of the vulcanized parts: Easy release and Dry surface.

• Do not give off odours during the curing process.• Excellent transparency and very good mechanical properties• Can be easily coloured.• Operating temperature: -60 to 200 ºC.• Hardness: From 20 to 80 Sh A.

Monocomponent silicone compounds of platinum particularly suitable for manufacturing moulded items.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 30 40 50 60 70 80


Tensile Strength DIN 53504 S 1 Mpa >9 >9.5 >10 >10 >9.5 >8.5

Elongation DIN 53504 S 1 % >900 >700 >500 >500 >500 >400

Tear Strength ASTM 624 B N/mm >22 >25 >30 >30 >25 >22


PROCESSING-VULCANIZATION Compression and/or injection mouldingWARNING: Risk of deactivation! The platinum catalyst may be deactivated in the presence of rubber mixtures containing amines and/or sulphides

All technical partsMoulds for food handling Transportation (automotive, rail, aviation, naval)FoodAgriculturalHousehold appliancesMachinery for the food industry

PACKAGING/DOSAGE

*All data are obtained after press curing with platinum crosslinker 15min 165º C, 4hr 200 ºC. / This information serves only as a guide and should not be used to create specifications.

SILAM PT is supplied in 20, 270 or 540 kg. cardboard boxes. It can be supplied preformed in:• Sheets available in different thicknesses.• Endless strips (several strip dimensions).• Blocks.



. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS

SECTORS



SILAM WIRE

• Very good dielectrical properties.• Good mechanical properties.• Extrusion at high speeds.• The mechanical properties, fire resistance, high

temperature resistance, or resistance to oils of the silicone compounds can be adjusted in accordance with the required standards.

• Good fire resistance and low smoke emission.• Very good resistance to high temperatures: up to 250 ºC.• Hardness: From 60 to 75 Sh A.

Silicone compound ready for use, particularly suitable for manufacturing silicone insulated cables.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) Between 60 and 75

Density DIN EN ISO 1183-1A g/cc (+/-0.03) >1.20

Tensile Strength DIN 53504 S 1 Mpa >5

Elongation DIN 53504 S 1 % >200

Volume resistivity DIN IEC 93 Ὠ.cm 1015

Dielectric resistance DIN IEC 243-2 kv/mm 20


PROCESSING-VULCANIZATION Extrusion by hot air, infrared or steam (catenary)

Silicone insulated cables

Transportation (automotive, rail, aviation, naval)Household appliancesElectricalConstruction Industrial machinery

PACKAGING/DOSAGE

*All data obtained after press curing with crosslinker E, 10min 135 ºC, 4hr 200 ºC. / This information serves only as a guide and should not be used to create specifications.

SILAM WIRE is supplied in 270 or 540 kg. cardboard boxes. It is supplied preformed in a filtered, endless strip. It is possible to supply in several strip dimensions.



. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS

SECTORS



SILAM WIRE SF

• In case of fire, the silicone insulation becomes an insulating ceramic layer that maintains the integrity of electrical circuits even at temperatures > 950 ºC.

• In case of fire, fumes low in density and toxicity are emitted.• Good mechanical and dielectrical properties.• Good resistance to high temperatures.• Available in a wide range of colours.• Hardness: From 65 to 75 Sh A.

Ready for use silicone compound for the manufacture of silico-ne insulated safety cables that maintain circuit integrity in case of fire in accordance with existing regulations: EN-50200, NFC-32070 CR1, BS 6387 CWZ, DIN 4102, part 12, UL 2196, IEC 60331-11, etc.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 65

Density DIN EN ISO 1183-1A g/cc (+/-0.03) >1.40

Breaking load DIN 53504 S 1 Mpa >6


Volumetric resistivity DIN IEC 93 Ὠ.cm 1015

Dielectrical resistance DIN IEC 243-2 kv/mm 20


PROCESSING-VULCANIZATION Extrusion by hot air, infrared or steam (catenary).

Silicone insulated cables. Recommended for all installations where it is required to maintain circuit integrity even though these are affected directly by the fire.

Intended for safety circuits, signalling, detection and alarm circuits and circuits for evacuation services and fire-fighting: •Public assembly buildings (airports, sports stadiums, underground, railway, etc.). •Civil works (tunnels, viaducts, etc.).

EMBALAJE / DOSIFICACIÓN

*All data obtained after press curing with crosslinker E, 10min 135 ºC, 4hr 200 ºC. / This information serves only as a guide and should not be used to create specifications.

SILAM WIRESF is supplied in 270 or 540 kg. cardboard boxes. It is supplied preformed in a filtered endless strip. Strips can be supplied in several dimensions.

The compound should be stored in a closed area and at a temperature below 30 °C.

The expiry date is indicated on the label. Once this may present some alteration of its characteristics.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APLICACIONES

SECTORES



SILAM GASKET DOOR

• Operating temperature: -60 a 250 ºC. -60 a 280 ºC. -60 a 300 ºC.• Excellent resistance to UV rays, oxygen, ozone and low and high

temperatures.• Compliance with Reach, RoHS and ROHS2 regulations. • High bond strength between metal inserts and silicone seal.• Resistant to grease and oils.• Gas permeable.• Water repellent and non-stick.• Good electrical insulation.• Good mechanical properties.• Available in a wide range of colours according to the RAL and

PANTONE charts.• Range of hardnesses available: From 20 to 90 Sh A.

Silicone profile for ovens and kitchens resistant to high temperatures (up to 300 °C), crosslinked by peroxides or platinum.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 20 30 40 50 60 70 80

Density DIN EN ISO 1183-1A g/cc (+/-0,03) 1,1 1,11 1,12 1,13 1,14 1,18 1,21

Breaking load DIN 53504 S 1 Mpa >6,5 >7 >8 >8,5 8,5 >9 >7,5

Elongation DIN 53504 S 1 % >800 >500 >450 >400 >350 >300 >250

Tear ASTM 624 B N/mm >15 >12 >18 >18 >19 >15

Material: High consistency silicone rubber (HCR) for high temperature vulcanization (HTV).TOLERANCES - In accordance with ISO 3301-1 Standard.

Airtight seals for ovens and standard and industrial cookers.

PACKAGING/DOSAGE

*Data obtained after postcuring for 4hrs 200 ºC. / This information serves only as a guide and should not be used to create specifications.

SILAM GASKET DOOR is supplied finished, ready for installation.

The product should be stored in a closed area, protected from direct sunlight. It is recommended to store it in a cool place, away from chemicals and in original packaging.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS

PACKAGING/DOSAGE

Available sizes

Geometries as per Silam catalogue or in accordance with client drawing.

Technical Department available to clients for co-designing and/or suggesting solutions.


SILAM GASKET

• Operating temperature: - 60 a 250 ºC. - 60 a 280 ºC. - 60 a 300 ºC. • Excellent resistance to UV rays, oxygen, ozone and low and high

temperatures.• Supplied scored with text and/or anagrams as per requirements

as well as incorporation of metal inserts as required by the product/application needs.

• Die-cut as per product required product/application needs.• High bond strength between metal inserts and silicone seal.• Compliance with Reach, RoHS and ROHS2 regulations.• Gas permeable.• Resistant to grease and oils.• Good electrical insulation.• Water repellent and non-stick.• Good mechanical properties.• Available in a wide range of colours according to the RAL and

PANTONE charts.• Range of hardnesses available: From 20 to 90 Sh A.

Silicone gasket resistant to high temperatures (up to 300 °C), crosslinked by peroxides or platinum.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 20 30 40 50 60 70 80


Breaking load DIN 53504 S 1 Mpa >6.5 >7 >8 >8.5 8.5 >9 7.5

Elongation DIN 53504 S 1 % >800 >500 >450 >400 >350 >300 >250

Tear ASTM 624 B N/mm >15 >12 >18 >18 >19 >15


Over door seals.

PACKAGING/DOSAGE


SILAM SEAL is supplied cutted to lenght and joined, ready to install in the oven by bonding or vulcanization.

The product should be stored in a closed area, protected from direct sunlight. It is recommended to store it in a cool place, away from chemicals. The expiry date is specified on the package label.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS


Available sizes

Geometries as per Silam catalogue or requirement in accordance with client drawing.



SILAM PER BUILDING

• Excellent resistance to UV rays, oxygen, ozone and low and high temperatures.

• Compliance as per ASTM C 1115 in accordance with THXFS2 Classification.

• Gas permeable. • Good electrical insulation.• Water repellent and non-stick.• Good mechanical properties.• Available in a wide range of colours according to the RAL

and PANTONE charts.• Operating temperature: -60 to 200 ºC, with peaks of 230 ºC.• Range of hardnesses available: From 60 to 70 Sh A. • Compliance with Reach, RoHS and ROHS2 regulations.

Silicone profile designed for sealant applications on façades, windows and doors in the building sector, crosslinked by peroxides or platinum.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 60 70

Density DIN EN ISO 1183-1A g/cc (+/-0.03) 1.18 1.20

Breaking load DIN 53504 S 1 Mpa >8 >7

Elongation DIN 53504 S 1 % >400 >200

Tear ASTM 624 B N/mm >26 >25


Sealing and airtightness in doors and windows, glass, curtain walls and unique façades.

PACKAGING/DOSAGE


SILAM PER BUILDING is supplied in:Rolls of 25, 50, 100 and 250 meters, depending on size. Cardboard reels.

Other presentations:Ability to provide cutted to length, perforated, punched, printed with text and/or anagrams as required, joined with high bonding strength.


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS


Available sizes




SILAM PER FIRE

• Low flammability and flame-resistant.• Compliance with Reach, RoHS and ROHS2 regulations.• Excellent resistance to UV rays, oxygen, ozone and low and

high temperatures.• Good electrical insulation.• Gas permeable.• Water repellent and non-stick.• Good mechanical properties.• Good transparency.• Available in a wide range of colours according to the RAL

and PANTONE charts.• Operating temperature: -60 a 200 ºC, with peaks of 230 ºC.• Range of hardnesses available: From 40 to 80 Sh A.

Flame-resistant silicone profile, crosslinked by peroxides or platinum.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 40 50 60 70 80



Elongation DIN 53504 S 1 % >400 >400 >300 >300 >200

Tear ASTM 624 B N/mm >16 >18 >18 >18 >12

Limiting Oxygen Index (LOI) ASTM D 2863 % >27


Protection of parts in low and high temperature environments in the electricity, electronics, electrical appliances and automotive sectors and needing good flame resistance and non-propa-gation. FLAME-RESISTANT .

Closures ensuring airtightness, watertightness and sealing.

EMBALAJE / DOSIFICACIÓN


SILAM PER FIRE is supplied in:Rolls of 25, 50, 100 and 250 meters, depending on size. Cardboard reels.

Other presentations:Ability to provide cutted to length, perforated, punched, printed with text and/or anagrams as required, joined with high bonding strength. The product should be stored in a closed area, protected from direct sunlight. It is recommended to store it in a cool place, away from chemicals and in original packaging.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS


Available sizes




SILAM PER FOAM FOOD GR

• Suitable for food contact in accordance with FDA CFR 21/ 177.2600 and "XV Silicones" section of the BfR and 2004 European Pharmacopoeia regulations.

• Food safety authority registration No.: 34.04695/SS.• Compliance with Reach, RoHS and ROHS2 regulations• Excellent properties for C.Set <25SP. • Good mechanical properties.• Excellent resistance to UV rays, oxygen, ozone and low and

high temperatures.• Water repellent.• Available in a wide range of colours according to the RAL

and PANTONE charts.• Operating temperature: -60 to 200 ºC, with peaks of 230 ºC.• Range of hardnesses available: From15 to 35 Sh A.Note: Data measured on D/6mm sponge cord.

Food grade silicone profile, crosslinked by peroxides or platinum.

Warning to users




Technical Data


Hardness 6mm cord compressed to 25% Sh A (+/-5) 15 - 35

Density DIN EN ISO 1183-1A g/cc (+/-0.03) 0.50 – 0.75



C. Set ASTM-395-B % < 25


Seals in high or low temperature applications when an excellent recovery from deformation is needed.

Protection of parts in low and high temperature environments in contact with food products.

PACKAGING/DOSAGE


SILAM PER FOAM FOOD GR is supplied in:Rolls of 25, 50, 100 and 250 meters, depending on size. Cardboard reels.

The following can also be supplied: • Cut to desired length • Cut and joined by bonding or vulcanization; ring-shaped. • Adhesive backing. • Punched.


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS


Available sizes




SILAM PER FOAM

• Excellent properties for C. Set. <25 SP.• Good mechanical properties.• Excellent resistance to UV rays, oxygen, ozone and low and

high temperatures.• Compliance with Reach, RoHS and ROHS2 regulations.• Water repellant.• Available in a wide range of colours according to the RAL

and PANTONE charts.• Operating temperature: -60 to 200 ºC, with peaks of 230 º C.• Range of hardnesses available: From 15 to 35 Sh A.Note: Data measured on D/6mm sponge cord.

Silicone profile, crosslinked by peroxides or platinum.

Warning to users




Technical Data






C. Set ASTM-395-B % < 25


Seals in high temperature applications and excellent recovery from deformation.

Protection of parts in low and high temperature environments in the electricity, electronics, electrical appliances and automotive sectors.

PACKAGING/DOSAGE


SILAM PER FOAM is supplied in:Rolls of 25, 50, 100 and 250 meters, depending on size. Cardboard reels.



. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS


Available sizes




SILAM PER FOOD GR

• The postcured profiles are suitable for food contact in accordance with FDA CFR 21/ 177.2600 and "XV Silicones" section of the BfR and 2004 European Pharmacopoeia regulations.

• Compliance with Reach, RoHS and ROHS2 regulations. • Food safety authority registration No.: 34.04695/SS.• Excellent resistance to UV rays, oxygen, ozone and low and high

temperatures.• Gas permeable.• Good electrical insulator.• Water repellent and non-stick.• Good mechanical properties.• Available in a wide range of colours according to the RAL and

PANTONE charts.• Operating temperature: -60 to 200 ºC.• Range of hardnesses available: From 20 to 90 Sh A.

Silicone profile suitable for applications in contact with food, crosslinked by peroxides or platinum.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 20 30 40 50 60 70 80 90


Breaking load DIN 53504 S 1 Mpa >6.5 >7 >8 >8.5 8.5 >9 >7.5 >6

Elongation DIN 53504 S 1 % >800 >500 >450 >400 >350 >300 >250 >200

Tear ASTM 624 B N/mm >15 >12 >18 >18 >19 >15 >15



Protection of parts in low and high temperature environments in contact with food products.

PACKAGING/DOSAGE


SILAM PER FOOD GR is supplied in:Rolls of 25, 50, 100 and 250 meters, depending on size. Cardboard reels.



. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS


Available sizes




SILAM PER HT

• Operating temperature: - 60 to 250 ºC. - 60 to 280 ºC. - 60 to 300 ºC.• Excellent resistance to UV rays, oxygen, ozone and low and

high temperatures.• Compliance with Reach, RoHS and ROHS2 regulations.• Good electrical insulator.• Gas permeable.• Good mechanical properties.• Translucent.• Available in a wide range of colours according to the RAL

and PANTONE charts.• Water repellent and non-stick.• Range of hardnesses available: From 20 to 90 Sh A.

Silicone profile resistant to high temperatures (up to 300 °C), crosslinked by peroxides.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 20 30 40 50 60 70 80


Breaking load DIN 53504 S 1 Mpa >6.5 >7 >8 >8.5 8.5 >9 >7.5

Elongation DIN 53504 S 1 % >800 >500 >450 >400 >350 >300 >250

Tear ASTM 624 B N/mm >15 >12 >18 >18 >19 >15




PACKAGING/DOSAGE


SILAM PER HT is supplied in:Rolls of 25, 50, 100 and 250 meters, depending on size. Cardboard reels.



. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS


Available sizes




SILAM PER PT

• EXCELLENT transparency.• Excellent resistance to UV rays, oxygen, ozone and low and

high temperatures.• Compliance with Reach, RoHS and ROHS2 regulations..• Good electrical insulation.• Gas permeability.• Very good mechanical properties.• Water repellent and non-stick.• Operating temperature: -60 to 200 ºC, with peaks of 230 ºC.• Available in a wide range of colours according to the RAL

and PANTONE charts.• Range of hardnesses available: From 30 to 80 Sh A.

Standard silicone profile, crosslinked by platinum catalyst.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 30 40 50 60 70 80


Breaking load DIN 53504 S 1 Mpa >9 >9.5 >10 >10 >9.5 >8.5

Elongation DIN 53504 S 1 % >900 >700 >500 >500 >500 >400

Tear ASTM 624 B N/mm >22 >25 >30 >30 >25 >22




PACKAGING/DOSAGE


SILAM PER PT is supplied in:Rolls of 25, 50, 100 and 250 meters, depending on size. Cardboard reels.



. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS


Available sizes




SILAM PER


• Good mechanical properties.• Gas permeable.• Water repellent and non-stick.• Good electrical insulation.• Operating temperature: -60 to 200 ºC, with peaks of 230 ºC.• Good transparency.• Available in a wide range of colours according to the RAL

and PANTONE charts.• Range of hardnesses available: From 20 to 90 Sh A.• Compliance with Reach, RoHS and ROHS2 regulations.

Standard silicone profile, crosslinked by peroxides.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 20 30 40 50 60 70 80 90

Density DIN EN ISO 1183-1A g/cc (+/-0,03) 1.1 1.11 1.12 1.13 1.14 1.18 1.21 1.22


Elongation DIN 53504 S 1 % >800 >500 >450 >400 >350 >300 >250 >200

Tear ASTM 624 B N/mm >15 >12 >18 >18 >19 >15 >15




PACKAGING/DOSAGE


SILAM PER is supplied in:Rolls of 25, 50, 100 and 250 meters, depending on size. Cardboard reels.

Other presentations:Ability to provide cutted to length, perforated, punched, printed with text and/or anagrams as required, joined with high bonding strength


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS


Available sizes




SILAM TUB FIRE

• Water repellent and non-stick.• Excellent resistance to UV rays, oxygen, ozone and low and

high temperatures.• Gas permeable.• Good electrical insulation. • Compliance with Reach, RoHS and ROHS2 regulations.• Good mechanical properties.• Good transparency.• Available in a wide range of colours according to the RAL

and PANTONE charts.• Operating temperature: -60 to 200 ºC, with peaks of 230 ºC.• Range of hardnesses available: From 40 to 80 Sh A.

Flame-resistant silicone tube, crosslinked by peroxides or platinum.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 40 50 60 70 80



Elongation DIN 53504 S 1 % >400 >400 >300 >300 >200

Tear ASTM 624 B N/mm >16 >18 >18 >18 >12


Transportation of fluids or gases in the automotive, construction, electrical appliances sectors and in those needing good flame resistance and non-propagation.Protection of parts in low and high temperature environments in the electricity, electronics, electrical appliances and automotive sectors.Insulation of cables.

PACKAGING/DOSAGE


SILAM TUB FIRE is supplied in:Rolls of 25, 50, 100 and 250 meters, depending on size. Cardboard reels.



. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS


Available sizes

Interior diameters from 1 mm up to 110 mm.Outer diameters from 2 mm up to 120 mm.


SILAM TUB FOAM FOOD GR


• Compliance with Reach, RoHS and ROHS2 regulations. • Food safety authority registration No.: 34.04695/SS. • Excellent resistance to UV rays, oxygen, ozone and low and high

temperatures.• Water repellent and non-stick.• Good mechanical properties.• Excellent properties for C. Set.• Operating temperature: -60 to 200 ºC, with peaks of 230 ºC.• Available in a wide range of colours according to the RAL and

PANTONE charts and transparent.• Range of hardnesses available: From 12 to 35 Sh A.

Food grade platinum silicone tube.

Warning to users




Technical Data






C. Set ASTM-395-B 22h to 175ºC % < 25


Seals in high temperature applications and excellent recovery from deformation.Protection of parts in low and high temperature environments in contact with food products.

PACKAGING/DOSAGE

*Data obtained after postcuring for 4hrs 200 ºC / This information serves only as a guide and should not be used to create specifications.

SILAM TUB FOAM FOOD GR is supplied in:Rolls of 25, 50, 100 and 250 meters, depending on size. Cardboard reels.



. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS


Available sizes



SILAM TUB FOAM


• Compliance with Reach, RoHS and ROHS2 regulations.• Excellent properties for C. Set. • Water repellent.• Operating temperature: -40 to 200 ºC, with peaks of 230 ºC. • Available in a wide range of colours according to the RAL

and PANTONE charts.• Range of hardnesses available: From 15 to 35 Sh A.Note: Data measured on D/6mm sponge cord.

Silicone sponge cords and tube, crosslinked by peroxides or platinum.

Warning to users




Technical Data






C. Set ASTM-395-B 22h to 175ºC % < 25




PACKAGING/DOSAGE


SILAM TUB FOAM is supplied in:Rolls of 25, 50, 100 and 250 meters, depending on size. Cardboard reels.



. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS


Available sizes



SILAM TUB FOOD GR


• Compliance with Reach, RoHS and ROHS2 regulations.• Food safety authority registration No.: 34.04695/SS.• Excellent resistance to UV rays, oxygen, ozone and low and

high temperatures.• Gas permeable.• Good electrical insulation.• Water-resistant.• Good mechanical properties.• Available in a wide range of colours according to the RAL

and PANTONE charts.• Operating temperature: -60 to 200 ºC.• Range of hardnesses available: From 20 to 90 Sh A.

Silicone tube suitable for applications in contact with food and drink, crosslinked by peroxides or platinum.

Warning to users




Technical Data


Dureza DIN 53505 Sh A (+/-5) 20 30 40 50 60 70 80 90

Densidad DIN EN ISO 1183-1A g/cc (+/-0.03) 1.1 1.11 1.12 1.13 1.14 1.18 1.21 1.22

Carga Rotura DIN 53504 S 1 Mpa >6.5 >7 >8 >8.5 8.5 >9 >7.5 >6

Alargamiento DIN 53504 S 1 % >800 >500 >450 >400 >350 >300 >250 >200

Desgarro ASTM 624 B N/mm >15 >12 >18 >18 >19 >15 >15

Material: High consistency silicone rubber (HCR) for high temperature vulcanization (HTV).TOLERANCIAS - In accordance with ISO 3301-1 Standard.

Transportation of fluids or gases in contact with food and drinks.

Vending machines for drinks and food (vending)Sealing for food containers.

PACKAGING/DOSAGE


SILAM TUB FOOD GR is supplied in:Rolls of 25, 50, 100 and 250 meters, depending on size. Cardboard reels



. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS


Available sizes



SILAM TUB HT

• Operating temperature: - 60 to 250 ºC. - 60 to 280 ºC. - 60 to 300 ºC.• Compliance with Reach, RoHS and ROHS2 regulations.• Good electrical insulation.• Excellent resistance to UV rays, oxygen, ozone and low and

high temperatures.• Gas permeable.• Water repellent and non-stick.• Good mechanical properties.• Available in a wide range of colours according to the RAL

and PANTONE charts.• Range of hardnesses available: From 20 to 80 Sh A.

Silicone profile resistant to high temperatures (up to 300 °C), crosslinked by peroxides.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 20 30 40 50 60 70 80

Density DIN EN ISO 1183-1A g/cc (+/-0,03) 1.1 1.11 1.12 1.13 1.14 1.18 1.21

Breaking load DIN 53504 S 1 Mpa >6.5 >7 >8 >8.5 8.5 >9 7.5

Elongation DIN 53504 S 1 % >800 >500 >450 >400 >350 >300 >250

Tear ASTM 624 B N/mm >15 >12 >18 >18 >19 >15


Transportation of fluids or gases in the automotive and construction sectors, and industry in general.Protection of parts in low and high temperature environments in the electricity, electronics and automotive sectors.Cable insulation in lighting products.

PACKAGING/DOSAGE


SILAM TUB HT is supplied in:Rolls of 25, 50, 100 and 250 meters, depending on size. Cardboard reels.



. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS

TORAGE / SERVICE LIFE

Available sizes



SILAM TUB MILK

• Suitable for applications in contact with food fluids.• Food safety authority registration No.: 34.04695/SS as per RD

1935/2004.• Compliance with Reach, RoHS and ROHS2 regulations. • Compliance according to FDA regulations, Bfr and European

Pharmacopoeia.• Good electrical insulation.• Gas permeable.• Water repellent and non-stick.• Good mechanical properties.• Available in a wide range of colours according to the RAL and

PANTONE charts.• Excellent resistance to UV rays, oxygen, ozone and low and

high temperatures.• Operating temperature: -60 to 200 ºC.• Range of hardnesses available: From 20 to 90 Sh A.

Silicone tube suitable for transport of milk in milking systems, crosslinked by peroxides or platinum.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 20 30 40 50 60 70 80 90



Elongation DIN 53504 S 1 % >800 >500 >450 >400 >350 >300 >250 >200

Tear ASTM 624 B N/mm >15 >12 >18 >18 >19 >15 >15


Transportation of fluids in MILKING SYSTEMS.

PACKAGING/DOSAGE


SILAM TUB MILK is supplied in:Rolls of 25, 50, 100 and 250 meters, depending on size. Cardboard reels.



. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS


Available sizes



SILAM TUB PHARMA

• The tubes are suitable for pharmaceutical applications and for contact with the bloodstream for less than 28 days in accordance with the regulations of standard USP XXV CLASS VI.

• Compliance according to FDA regulations, Bfr and European Pharmacopoeia.

• Compliance with Reach, RoHS and ROHS2 regulations.• Excellent resistance to UV rays, oxygen, ozone and low and

high temperatures.• Water repellent and non-stick.• Gas permeable.• Good electrical insulation.• Good mechanical properties.• Available in a wide range of colours according to the RAL

and PANTONE charts.• Operating temperature: -60 to 200 ºC.• Range of hardnesses available: From 20 to 80 Sh A.

Silicone tube suitable for pharmaceutical applications and contact with bloodstream for less than 28 days, crosslinked by peroxides or platinum.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 20 30 40 50 60 70 80


Breaking load DIN 53504 S 1 Mpa >6.5 >8 >8.5 >8.5 >9 >9 >7.5

Elongation DIN 53504 S 1 % >800 >500 >450 >400 >350 >350 >250

Tear ASTM 624 B N/mm >18 >18 >18 >20 >22 >20 >15


Transportation of fluids or gases in PHARMACEUTICAL APPLICATIONS.

In peristaltic pumps.

PACKAGING/DOSAGE


SILAM TUB PHARMA is supplied in:Rolls of 25, 50, 100 and 250 meters, depending on size. Cardboard reels.



. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS


Available sizes



SILAM TUB PT

• EXCELLENT transparency.• Very good mechanical properties.• Excellent resistance to UV rays, oxygen, ozone and low and

high temperatures.• Compliance with Reach, RoHS and ROHS2 regulations.• Good electrical insulation.• Gas permeable.• Water repellent and non-stick.• Available in a wide range of colours according to the RAL

and PANTONE charts.• Operating temperature: -60 to 200 ºC, with peaks of 230 ºC.• Range of hardnesses available: From 30 to 80 Sh A.

Standard silicone tube, crosslinked by platinum catalyst.

Warning to users




Technical Data

PROPIEDADES MÉTODO UNIDADES

Dureza DIN 53505 Sh A (+/-5) 30 40 50 60 70 80

Densidad DIN EN ISO 1183-1A g/cc (+/-0.03) 1.11 1.12 1.13 1.14 1.18 1.20

Carga Rotura DIN 53504 S 1 Mpa >9 >9.5 >10 >10 >9.5 >8.5

Alargamiento DIN 53504 S 1 % >900 >700 >500 >500 >500 >400

Desgarro ASTM 624 B N/mm >22 >25 >30 >30 >25 >22


Transportation of fluids or gases in the automotive and construction sectors, industry in general and for food handling.Protection of parts in low and high temperature environments in the electricity, electronics and automotive sectors.

PACKAGING/DOSAGE


SILAM TUB PT is supplied in:Rolls of 25, 50, 100 and 250 meters, depending on size. Cardboard reels.



. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS


Available sizes



SILAM TUB

• Good mechanical properties.• Excellent resistance to UV rays, oxygen, ozone and low and

high temperatures.• Compliance with Reach, RoHS and ROHS2 regulations.• Operating temperature: -60 to 200 ºC, with peaks of 230 ºC.• Good electrical insulation.• Water repellent and non-stick.• Good transparency.• Available in a wide range of colours according to the RAL

and PANTONE charts.• Gas permeability.• Range of hardnesses available: From 20 to 90 Sh A.

Silicone tube, crosslinked by peroxides.

Warning to users




Technical Data


Hardness DIN 53505 Sh A (+/-5) 20 30 40 50 60 70 80 90



Elongation DIN 53504 S 1 % >800 >500 >450 >400 >350 >300 >250 >200

Tear ASTM 624 B N/mm >15 >12 >18 >18 >19 >15 >15


Transportation of fluids or gases in the automotive and construction sectors, and industry in general.Protection of parts in low and high temperature environments in the electricity, electronics and automotive sectors.Cable insulation in lighting products.

PACKAGING/DOSAGE


SILAM TUB is supplied in:Rolls of 25, 50, 100 and 250 meters, depending on size. Cardboard reels.



. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


APPLICATIONS


Available sizes


technical data sheet - silicones silam

Documents