step-by-step tutorial for noobies flash your n97 with jaf(example flash hegazy ultimate n97 v3.0...
TRANSCRIPT
Step-by-step tutorial For noobies: flash your N97 with JAF
(Example: Flash Hegazy Ultimate N97 V3.0 Rm-505 v22.0.110 cracked all languages fastest
rom you ever met)
100% success rate guaranteed!
STEP-1 Install Nokia PC suite in C drive, the purpose is to backup your contacts and to confirm your USB
cable is working properly. Be warned that PC suite must be installed prior to JAF, because PC
suite will overwrite JAF’s installation directory. Unplug USB cable after you see the connection is
ok using PC suite, then go ahead to STEP-2. Remarks: you can flash your N97 without Nokia PC suite being installed.
STEP-2
Hard format C drive in N97: In dial panel key in *#7370#,code:12345,the phone will restart, you
will see settings for country, date, time, language etc, just select anything for these settings, you
are going to flash another firmware anyway.
STEP-3
Format E drive in N97: As I have many pictures and data in E drive, so I will not format it.
But it will get same result if I delete the following folders. Do exactly as I say: Connect N97 and
PC, select connection method Mass Storage, then delete the following folders in this Mass
Storage:
E:\private
E:\sys
E:\system
E:\resource
E:\patches
STEP-4
Download “JAF 1.98.66 DOSPY.RAR”, download link:
http://www.rayfile.com/files/40c0c97a-dcf5-11df-a85b-0015c55db73d/ Unzip, install this JAF flash tool in C drive of PC, warning, please shut down any firewall and
antivirus software before installation. During installation, if there is one dialogue asking you
whether you need to install different version of cable driver, you better select No. PC maybe
reboot when JAF installation is finished.
STEP-5
Download “Hegazy Ultimate N97 V3.0 Rm-505 v22.0.110 fastest you ever met”. download link:
http://www.rayfile.com/files/4c4a4de8-dd01-11df-b6fc-0015c55db73d/ Unzip, you get a folder named Phoenix, copy this whole folder to C:\Program Files\Nokia
(If you flashed N97 before in this PC, then there is already a folder named Phoenix, replace it with
this new Phoenix folder) Remarks: this firmware is for RM-505,However,the new understanding is that,RM-506 and RM-507 N97 can also use this firmware.
Don’t need to change your RM or code, just flash any RM-505 firmware to your RM-506,RM507 N97 directly, just pretend that your N97
is RM-505;
STEP-6
Once again make sure all firewall and antivirus are shut down, this is super important! Run
installed JAF (the football icon in your PC desktop). Click RUN JAF 1.98.66 Beta5 (screenshot
below),a warning “P-Key dongle not detected” error pops up, ignore it, click ok to make it gone,
click again RUN JAF 1.98.66 Beta to prompt a new window(see STEP-7). Please note
sometimes it takes quite a while for this window to appear, so be patient. Special notes for Win 7 users, please follow this procedure for JAF to work properly:
1. right click on installed JAF (the football icon in your PC desktop), and then choose properties
2. on the compatibility tab, tick the "Run this program in compatibility mode for:"
3. choose Windows XP Service Pack 3
4. on the Privilege Level tab, tick Run this program as an administrator
5. click ok
STEP-7
This step scares shit out of many people, by merely looking at the screenshot you will think this is
very technical and complicated thing, actually it is much easier than eating a cake. Let me tell you:
In this window, Click BB5 first to let you access to new section, then tick “Manual Flash”, “Dead
USB”, “Factory set”. Normal mode” is ticked by default, leave it. CRT 308 is ticked by default,
untick it! Check again with my screenshot below, it is this easy!
STEP-8
Still in this window, tick “Use INI”, a small window will pop up after 2-15 seconds, select your
model RM-505, then click ok. (screenshot below) Remarks: if your N97 is RM-506 or RM-507, please also select RM-505, as I said earlier, just pretend your N97 is RM-505.
STEP-9
Then JAF will automatically search directory C:\Program files\Nokia\Phoenix\Products\RM-505,
It will find the firmware successfully (screenshot below); Remarks: in future if you flash another firmware, a complete firmware contains 8 files, copy these 8 files to C:\Program
Files\Nokia\Phoenix\Products\RM-505 before you delete old 8 files.
STEP-10
All right, let’s put JAF for a rest, leave it alone. Now turn off N97, connect it to PC with cable,
Nokia USB Flashing Parent driver will be updated with N97 (screenshot below). Then unplug
USB cable from N97 (with another end still remain connected with PC), Make sure the light goes
completely off in N97 screen, sometimes you should wait patiently because the light on screen
will not die off until several minutes, if the screen keeps light on for long time, you can take some
measures, for example, press power-on then power-off again, or even take battery out and place it
back.
In one word, you must make sure the phone is dead, otherwise flashing will not succeed. Remarks: Next time if you still use this JAF kept uninstalled, then you can skip STEP-10 because driver was already updated, go to
STEP-11 directly.
STEP-11
Now, hold your breath, let us flash! Click FLASH in JAF, a serious warning comes up, ignore it,
it’s bullshit, click YES (screenshot below):
STEP-12
The moment you click YES button mentioned above, immediately plug USB cable into dead N97.
Don’t be nervous, otherwise it will take too long for your dick to slide into the still-hot pussy;
Once in, that’s it, just sit back, don’t do nothing, the bitch will do everything automatically that
must be done to pleasure you.
STEP-13
If an error ever comes out “Searching for phone...Not found!!!” (Screenshot below), this is very
common, everybody gets constipation every now and then. Unplug USB, repeat STEP-11 and
STEP-12, just try several times, I assure you the shit will definitely get through your asshole. I
suggest you to buy a good USB extension cable, one end should be plugged to the USB port
located on the back of PC to get better connection. The USB cable provided by Nokia is too short.
STEP-14
If JAF finds the phone, it will display “Searching for phone...found” in Status and Results log
(screenshot below), this is great news, Miss right finds Mr right, they start to copulate intimately,
hold your breath, enjoy the moment, you are going to get a great orgasm, guaranteed.
STEP-15
The whole process is done very quickly, like several minutes (screenshot below). When you see
Done! Done! in JAF Status and Results log(second screenshot below), this means the copulation is
done, you can get your dick (USB cable) out off the pussy (N97 USB port) right away. N97 will
remain white screen for a while (1-10 minutes depending on firmware), then woala, the startup
screen shows up. You did it! Great fuck!
STEP-16
After startup, you will see settings for country, date, time, language etc, just select anything for
these settings, you are going to hard reset the phone anyway..
When inside the phone, let’s perform a hard reset: in dial panel input *#7370#,code:12345,the
phone will restart, now you can set your correct country, date, time, language etc.
According to many sources, hard reset after flash will make the system more stable and keep bug
away. So please just do it.
Please leave phone for 5-10 minutes without doing any operation, because some applications are
being installed on the background, when it’s done, a window will show up “Phone will restart to
finish installation”, click OK to restart the phone.
Now operation is fully finished, go to bathroom to clean yourself up.
2010-10-22 originally by Nokiadashi