state of the deconstruction and used building materials industry
TRANSCRIPT
State of the Deconstruction and Used Building Materials
Industry
Strengths
• Vermont is well represented by variety of reuse stores ranging from architectural salvage to wholesale building material reuse centers.
• Many institutions have included reuse/recycling in their bid specifications.
• Large and small construction firms have made waste reduction a priority.
• State is home to a permanent professional deconstruction service regarded as one of best in the country.
• Reuse activities serve a variety of different needs including business profit, economic development, job training, and affordable housing.
Deconstruction Jobs 2004
Deconstruction Stage 1
Deconstruction Stage 2
Deconstruction Stage 3
Flooring Salvage and Reuse
Job Training and Affordable Housing Benefits of Reuse
Waste Not Products
Weaknesses
• Reuse and recycling represent only a small fraction of total C & D waste.
• Deconstruction is labor intensive and mostly done by nonprofits. Investment in time and labor saving equipment is minimal. Costs are high. Bidding is difficult.
• Reuse effort has not been institutionalized and incorporated into standard operating procedures. Time and cost constraints thwart many good intentions.
• Supply is uneven
Deconstruction is an exception to the demolition
rule.
The Aftermath of Hurricane Katrina
• 50 million cubic yards (CY) of debris in Louisiana• Trucking will require 20 million gallons of diesel
fuel and produce 430,000 tons of CO2 emissions. • Burning would result in 22.5 million tons of
emissions.• Landfilling will require an area the size of a
football field to a height of almost 5 miles.• 275,000 homes were destroyed. Building material
costs across the country will skyrocket.
Opportunities: lumber
Opportunities
• LEED: Leadership in energy & environmental design.• Economic trends that point toward an expansion of
deconstruction opportunities• Value added. Marketing to higher income and
environmentally conscious consumers.• New construction methods and techniques that facilitate
reuse and recycling• Broader public understanding of salvage and reuse process
and benefits. Marketing to environmental consumer.• Deconstruction efficiency improvements. Investment in
UBM Store Front.
Opportunities: Equipment
Opportunities: Space
Survey: Perceived Barriers to Reuse
• Education 19.4%• Markets (matching supply and demand) 13.9%• Costs of labor 11.1%• Environmental regulations 11.1%• Perception of low quality 8.3%• Storage needs 8.3%• Damage to wood/Contamination nails 5.6%• Insurance and workers compensation costs 5.6%
Barriers
• External environmental costs of alternatives to reuse resulting in low margins for industry.
• Large need for education/marketing• Product standardization, dependability, supply
consistency• Time• Capital• Construction techniques• Inertia• Health and Safety
Health and Safety 1
Health and Safety 2
Cold and Snow 1
Cold and Snow 2
Contact Info:Tom LongstrethExecutive DirectorReCycle North266 Pine StreetBurlington, VT [email protected] x. 14
Other Barriers?Other Opportunities?
Questions?