spraying systems catalogue

North Avenue and Schmale Road, P.O. Box 7900, Wheaton, IL 60187-7901 USA

Tel: 1.800.95.SPRAY Intl. Tel: 1.630.665.5000 Fax: 1.888.95.SPRAY Intl. Fax: 1.630.260.0842 Email: [email protected]

www.spray.com

AIR ATOMIZING & AUTOMATIC S P R A Y N O Z Z L E S

1.800.95.SPRAY | spray.com

Catalog 75 AA-AUTO © 2013 Spraying Systems Co. All rights reserved. Full protection of law claimed under Universal Copyright and Berne Conventions and other applicable national and international laws.

SP

RA

YIN

G S

YS

TE

MS

CO

. C

AT

AL

OG

75

| AIR

AT

OM

IZIN

G &

AU

TO

MA

TIC

SP

RA

Y N

OZ

ZL

ES

THANK YOU FOR YOUR INTEREST IN OUR SPRAY PRODUCTS

SUPERIOR SPRAY. SERIOUS RESULTS.

Visit spray.com/results to see how we’ve helped others increase throughput, reduce water and chemical use, improve worker safety and more. This library of case studies includes details on how quickly customers recouped their investment in new spray equipment.

WE’RE LOOKING FORWARD TO HELPING YOU OPTIMIZE YOUR OPERATIONS INVOLVING

SPRAY TECHNOLOGY. HERE ARE JUST A FEW WAYS WE CAN ASSIST:

• You’ll find the most extensive line of high-quality air atomizing and automatic spray nozzles available in this catalog. However, if you don’t find exactly what you need, be sure to contact us. Our flexible manufacturing capabilities enable us to make products in additional sizes and materials quickly and efficiently. Special designs are also possible. Just tell us what you need

• Need a different type of spray solution? Or a spray product for a specific application? Visit spray.com to find additional cat-alogs on these product lines:

– Hydraulic Spray Nozzles including FullJet®, VeeJet®, WhirlJet®, SpiralJet® nozzles and more

– Spray System Controllers and Automated Spray Systems

– Handheld GunJet® Spray Guns

– WindJet® Air Products

– TankJet® Tank Cleaning Products

– SprayDry® Nozzles

– Pulp and Paper Spray Products

– Steel Industry Spray Products

• On-site tank cleaning evaluations, spray optimization programs, nozzle maintenance workshops and lunch and learn sessions are just a few of the many services we provide. It's easy to take advantage of these programs – just contact your local representative. You’ll find a spray expert nearby – we have hundreds of technical sales and service people in more than 90 sales offices around the world

• Need a device to deliver fluid to your nozzles? Talk to us about headers, manifolds, lances, injectors and more

These are just a few of the ways we can help you get the results you need from your spray systems; you’ll learn about others in the pages that follow. Please be sure to visit spray.com or contact us whenever you need assistance – we're here to serve you.

Thank you – we value your business!

H O W T O O R D E R A N D C U S T O M E R S E RV I C E

1spray.com | 1.800.95.SPRAY

TABLE OF CONTENTS

What You Can Expect 2

Spray System Optimization 8

How to Order and Customer Service 10

Technical Reference A1

Air Atomizing Spray Nozzles B1

Automatic Spray Nozzles C1

Index i-1

2 spray.com | 1.800.95.SPRAY

You’ll find tens of thousands of hydraulic spray nozzles in this catalog but you can also visit spray.com to see tens of thousands more. Featured products include air atomizing nozzles, automatic hydraulic and pneumatic nozzles, handheld spray guns, tank cleaning equipment, air nozzles and nozzles for specialized operations like descaling, trim squirt, spray drying, fire protection and more. We offer nozzles in more sizes and materials than any other supplier, so you’re sure to find a product that delivers the performance you need.

PRECISE, DEPENDABLE PRODUCT QUALITY

Your satisfaction is important to us. Our products are manufactured to exacting standards to deliver the promised performance each and every time you order. We are ISO 9001:2008 and 14001:2004 certified. Products ship only after undergoing our rigorous quality control and testing programs. If you have any concerns about the quality of any of our products, contact us immediately. We will address your issues and take corrective action as needed.

PRODUCTS WHEN YOU NEED THEM

Most of our spray nozzles are readily available and will be shipped within days of your order. If you need expedited service, let us know. Our ten manufacturing locations are strategically located around the world to help ensure we can get our products where they are needed quickly and cost-effectively.

SPECIAL REQUIREMENTS? TELL US WHAT YOU NEED.

If one of our standard products isn’t quite right for your equipment, just let us know. Customization can range from simple changes in materials to specially-designed nozzles to meet exacting performance requirements.

We work with hundreds of OEMs and provide services like these:

• Special nozzle designs

• Private labeling with unique part numbers

• Special packaging

• Customized maintenance and operating instructions

THE PRODUCTS YOU NEED AND PERFORMANCE YOU CAN COUNT ON

W H AT Y O U C A N E X P E C T – R E L I A B L E Q U A L I T Y


OUR SOLE FOCUS ON SPRAY TECHNOLOGY ENSURES RESULTS IN YOUR OPERATIONS

Since spray technology is all we do, we have a level of expertise that can’t be matched. Our sales engineers are factory-trained and only sell our spray products. Need to increase throughput in a coating operation? Eliminate waste or lower scrap? Cool products more quickly? Suppress dust? Minimize water and chemical use in cleaning operations? Just give us a call. With sales offices on six continents and more than 90 sales offices, we are in your area and ready to help.

WHAT CUSTOMERS SAY ABOUT OUR SERVICE

“ We are very pleased with Spraying Systems Co. Wish all vendors were as good.”

“ Very pleased – awesome is the best way to describe Spraying Systems Co. service.”

“ A+ on service. Sales engineer responded quickly and visited my facility to review various product options for my application.”

“ Rep always provides prompt answers. Knows the full product line inside and out.”

“ I get more technical support from Spraying Systems Co. than any other vendor.”

“ The local rep came right out – didn’t even know the size of the project at the time.”

“Spraying Systems Co. provides solutions – not just parts.”

“ More knowledgeable than any other equipment company we work with.”

“ We get the products we need, when we need them. Each and every time we order.”

THE SERVICES YOU NEED, WHEN AND WHERE YOU NEED THEM

W H AT Y O U C A N E X P E C T – G L O B A L S U P P O RT


SPRAY CONTROL

Spray nozzles can only perform properly if the entire spray system is operating efficiently. That’s why we offer a wide range of AutoJet® spray controllers. Choose from basic automatic control, monitoring of spray variables or automatic adjustments of spray variables based on what is happening in your process. Adding a spray controller can help:

• Increase production through automation and enable operation at variable line speeds

• Reduce labor costs by eliminating manual operation, system monitoring and changeover of nozzles between batches

• Lower operating costs by eliminating overspray and waste through precision spraying

• Improve worker safety by minimizing exposure to harmful chemicals

Application-specific systems are also part of our offering for more demanding spray operations.

TURNKEY SYSTEM OPTIONS

• AccuCoat® Heated Spray Systems for viscous food coatings

• AutoJet® Antimicrobial and Mold Inhibitor Spray Systems for food safety applications

• PanelSpray® System for engineered wood products

• AutoJet® Tissue and Web Lamination Spray System for tissue and other hygienic products

• AutoJet® Gas Cooling System for pollution control

Additional options include systems for dust suppression, NOx control and humidification. Check with your local sales office; system availability may vary by region.

ADDITIONAL EQUIPMENT TO OPTIMIZE SPRAY NOZZLE PERFORMANCE

W H AT Y O U C A N E X P E C T – P R E C I S I O N


HEADERS AND INJECTORS

The equipment that supplies fluid to spray nozzles can have a big impact on performance. If the fluid flow isn’t adequate or the fluid delivery devices aren’t suitable for the operating environment, the entire process is in jeopardy. Unlike feed devices built by fabricators or in-house staff, our spray headers, manifolds, showers, injectors, lances and quills are designed to optimize the performance of our spray nozzles and streamline your operations.

You can specify the length, number of nozzles, nozzle spacing and connection type for most of our manifolds and headers. Spray injectors can also be customized. You can specify nozzle type, nozzle placement, materials, coatings and any specialized testing required.

The next time you order spray nozzles, take a moment to consider your fluid delivery equipment. Talk to your local sales engineer about ways to ensure optimal performance and streamline operations.

PRODUCT OPTIONS INCLUDE:

• Basic spray nozzle manifolds with a C-channel to facilitate spray nozzle set-up and adjustment

• Pipe-in-pipe spray manifolds with nozzles mounted inside a slotted pipe for protection against build-up and damage

• Modular spray manifolds with easy-to-access tubing and fittings to simplify set-up and cleaning

• Built-to-order spray manifolds

• Automatic brush showers that keep nozzles clean without process interruption or maintenance downtime

• Built-to-order spray injectors for use in demanding environments such as refineries, power plants and chemical production

• Spray quills and lances for use in environments where spray performance is less critical

W H AT Y O U C A N E X P E C T – C U S T O M I Z AT I O N


TESTING SERVICES HELP ENSURE PRECISION SPRAY PERFORMANCE

In new spray applications or applications where spray performance is critical, it is important to understand how factors like these affect performance:

• Operating conditions such as pressure, temperature and variable line speeds

• The liquid being sprayed

• The placement and position of nozzles in relation to the target

In many cases, experience and theoretical calculations can provide an indication of actual spray performance. However, testing in our spray labs determines actual performance and can eliminate costly specification mistakes or quality problems after installation. During testing, we can adjust operating conditions and/or test different nozzles until we find the exact spray performance required in your application.

Common tests include:

• Spray characterization• Drop size distribution • Spray impact• Spray pattern • Spray coverage

• Spray angle• Evaporation rate• Residence time• Dwell time

A LOOK INSIDE OUR LABS

Evaluating sprays requires very specialized equipment. In fact, some of our equipment was designed by our spray engineers and is used only in our facilities. Our test equipment includes:

• Spray patternators to measure spray distribution

• Impact testers to determine impact throughout a spray

• Laser diffraction and Phase Doppler particle size analyzers to measure drop size and spray velocity

• Laser sheet imaging analyzers to evaluate spray shape and distribution

• Wind tunnel to determine the effects of air currents and gas flows on sprays

PERFORMANCE VALIDATION BEFORE YOU BUY

W H AT Y O U C A N E X P E C T – A D VA N C E D T E C H N I C A L S U P P O RT


ADVANCED MODELING SERVICES AND MANUFACTURING CAPABILITIES FOR COMPLEX AND DEMANDING APPLICATIONS

It is not feasible to replicate operating conditions for every application. Gas cooling, chemical injection, spray drying and tablet coating are just a few applications where we cannot spray the liquids used for safety reasons or procure comparable process equipment. Yet, in these applications, understanding spray performance is often critical to process efficiency, product quality, equipment longevity and even worker safety. That’s when we use sophisticated modeling tools to predict spray performance.

• Computational Fluid Dynamics (CFD) models illustrate flow patterns, velocity, temperature, gas/liquid distributions, droplet trajectories, internal system pressure and more in scrubbers, towers, ducts and dryers. Our models use data we’ve collected in our spray labs to reduce the error factor and precisely predict spray performance

• Fluid Structure Interaction (FSI) examines the interaction between fluid dynamics and structural integrity. This enables us to determine the materials required to withstand mechanical stresses such as load, pressure, turbulence, corrosion and more

Demanding applications often require the use of special materials and compliance with various manufacturing codes and testing standards. We can produce nozzles, quills, injectors and headers to exacting standards and conduct a wide range of tests to validate construction.

MANUFACTURING AND TESTING CAPABILITIES

Manufacturing:

• ASME® Boiler and Pressure Vessel Code

• ASME B31.1 Power Piping Code

• ASME B31.3 Process Piping Code

• Welding to ASME B&PV Code Section IX

• cGMP

• Canadian Registration Number requirements

Testing in accordance with ANSI®, ASTM® standards:

• Ultrasonic

• Radiographic

• Liquid penetrant

• Hardness

• Hydrostatic

• Magnetic particle examination

• Positive material identification

See Trademark Registration and Ownership, page i-1.

W H AT Y O U C A N E X P E C T – R E S E A R C H A N D VA L I D AT I O N

Learn more about our testing and modeling services at sprayconsultants.com.

S P R AY S Y S T E M O P T I M I Z AT I O N


WAYS TO LEARN MORE

EXPERT ADVICE AT YOUR PLANT

No-charge spray system evaluation – Your local sales engineer will inspect your current spray operations and provide suggestions on how to improve efficiency. Evaluations can focus on a specific area such as reducing water or compressed air use, tank cleaning, automation opportunities and more.

Complimentary Lunch and Learn workshops – Select a topic, choose a date and invite your colleagues. We’ll provide lunch and an informative 60-minute session. Popular topics include Spray Nozzle Basics, Understanding Drop Size and How to Reduce Use of Costly Chemicals.

Spray demos and proof-of-concept trials at your facility – Your local sales engineer will conduct demos and tests on-site so you can see how a product will work in your environment. When operating conditions don’t allow an on-site demo or test, other arrangements can be made.

TESTS AND DEMONSTRATIONS AVAILABLE AT REGIONAL SPRAY TECHNOLOGY CENTERS

Throughout North America, we have several Spray Technology Centers. These facilities are equipped to conduct proof-of-concept tests and technology demonstrations. Seminars including live demonstrations on various topics are also conducted throughout the year. Schedules vary by region so contact your local sales engineer for information.

MULTI-DAY SEMINARS FOR ADVANCED LEARNING

An in-depth seminar on the atomization and spraying of liquids is conducted twice a year at our facility in Wheaton, IL. Attendees spend time in the classroom and our fully equipped spray laboratories and participate in spray characterization tests. More information is available from your local sales engineer and at sprayconsultants.com.

HOW YOU CAN BENEFIT FROM SPRAY SYSTEM OPTIMIZATION

S P R AY S Y S T E M O P T I M I Z AT I O N


EDUCATIONAL RESOURCES

Video demonstrations and tutorials on spray.com and YouTube.com/sprayingsystems

Explore our video library and learn about new spray products and techniques; best practices in maintenance procedures; what to look for in a spray pattern and more.

Technical guides and white papers on spray.com

• Optimizing Your Spray System, Technical Manual 410

• Pulse Width Modulated (PWM) Flow Control, Technical Manual 414

• Change the Way You Spray to Maximize Water Conservation, Technical Manual 415

• White paper series addresses topics ranging from spray automation, solving clogging problems, water conservation and more

Case studies on spray.com

More than 50 case studies demonstrate the benefits other processors have experienced through spray optimization. See spray.com/results.

Catalogs on spray.com

• Air Atomizing and Automatic Air Atomizing Nozzles

• Hydraulic Automatic Nozzles

• TankJet® Tank Cleaning Products

• WindJet® Air Products

• SprayDry® Nozzles

• Spray Technology for Steelmaking

• Spray Technology for Pulp and Papermaking

• Car Wash Products

• GunJet® Handheld Spray Guns

• Plus dozens of market- and product-specific technical bulletins

H O W T O O R D E R A N D C U S T O M E R S E RV I C E


For your convenience, there are multiple ways to place an order: phone, fax and online.

In North America Phone: 1.800.95.SPRAY | Fax: 1.888.95.SPRAY

Outside North America Phone: 1.630.665.5000 | Fax: 1.630.260.0842

Online ordering with a credit card is also available. Visit spray.com/ispray. You’ll find helpful selection tools and a Live Chat option for immediate assistance.

FINDING PRODUCTS

• Consult the Product Index on page i-4 if you know the name of the product

• Consult the Part Number Index on page i-7 if you have the part number. Part numbers are shown alphanumerically on page i-8

Selection assistance is also available by calling 1.800.95.SPRAY. Representatives in your local sales office will help you determine which products best meet your application requirements. (Call 1.630.665.5000 outside North America or visit spray.com to find information for the sales office in your area.)

ORDERING PRODUCTSIn each product section, you’ll find ordering examples. Start by reviewing the example and then create the part number by indicating the inlet connection, material and capacity size.

1/4

Example

JN SS– + –Inlet

Conn.

Nozzle Body

Assembly Type

Material Code

Material Code– –+

Spray Set-up

No.SU11DF SS

T E C H N I C A L R E F E R E N C E

TABLE OF CONTENTS

A1

Basic Nozzle Characteristics A2

Capacity and Specific Gravity A5

Spray Performance Considerations A6

Pump Selection Guidelines A7

Spray Drop Size A8

Drop Size Terminology and Impact A9

Operating Pressure and Nozzle Materials A10

Viscosity, Temperature and Surface Tension A11

Pressure Drop A12

Maintenance Tips A14

Weights, Measurements and Formulas A15

General Safety Instructions A16

A2 spray.com | 1.800.95.SPRAY

TECHNICAL REFERENCE

BASIC NOZZLE CHARACTERISTICS

Spray nozzles are precision components designed to yield very specific performance under specific conditions. To help you determine the best nozzle type for your application, the following chart summarizes the performance that each nozzle type is designed to deliver. Visit youtube.com/sprayingsystems for video demonstrations of spray patterns.

The spray pattern images on the right were taken in our spray laboratories using laser sheet imaging. A laser beam is passed through the spray pattern in a horizontal sheet to illuminate a cross section of the spray. A high-speed camera photographs the illuminated cross section. The light intensity in the spray is directly proportional to the volume of liquid. Red indicates the highest light intensity, which corresponds to the heaviest volume in the spray. Black is the lowest or no light intensity.

FULL CONE NOZZLES

Spray Angle Range: 15° to 125°

• Uses a unique internal vane design to produce a solid cone-shaped spray pattern

• Spray pattern consists of medium- to large-sized drops

Typical applications:

• Chemical injection

• Dust suppression

• Fire protection

• Metal cooling

• Washing/rinsing

FULL CONE (SPIRAL-TYPE) NOZZLES


• Produces a solid cone-shaped spray pattern when the fluid exits the voids in the spiral

• Spray pattern is not as uniform as full cone nozzles with an internal vane

• Spray pattern consists of relatively coarse drops



• Fire protection

• Flue gas desulfurization (FGD)

• Quenching

FULL CONE (OVAL SPRAY) NOZZLES


• Uses a unique internal vane to produce a solid cone-shaped spray pattern with oval impact area with a width approximately one-half its length

• Spray pattern consists of medium- to large-sized drops


• Air/gas washing

• Cooling and quenching

• Dust control

• Fire suppression

FULL CONE (SQUARE SPRAY) NOZZLES


• Uses a unique internal vane to produce a solid cone-shaped spray with square impact area

• Spray pattern is uniform across entire spray area• Spray pattern consists of medium- to large-sized drops


• Air/gas washing

• Cooling and quenching

• Dust control

• Fire suppression

LASER SHEET IMAGE

A3spray.com | 1.800.95.SPRAY

TECHNICAL REFERENCEBASIC NOZZLE CHARACTERISTICS

FLAT (EVEN) NOZZLES


• Provides even distribution of medium-sized drops throughout the thin, rectangular spray pattern

• When used on a header, nozzles are positioned for edge-to-edge pattern contact


• Coating

• Cooling

• Moisturizing

• Washing

FLAT SPRAY (TAPERED) NOZZLES


• Produces a tapered-edge flat spray pattern

• Used on spray headers to provide uniform coverage as a result of overlapping distributions


• Descaling

• High-pressure cleaning

• Label removal

FLAT SPRAY (DEFLECTED-TYPE) NOZZLES


• Uses a deflector surface to form an even flat spray pattern consisting of medium-sized drops

• Large free passage design reduces clogging through the round orifice


• Showers in papermaking

• Washing

HOLLOW CONE (WHIRLCHAMBER-TYPE) NOZZLES


• Uses a whirlchamber to rotate the fluid and produce a circular spray pattern

• Ideal for use when a combination of small drop size and higher capacity is needed


• Air, gas and water cooling

• Cooling products on conveyors

• Dust control


• Water aeration

HOLLOW CONE (DEFLECTED-TYPE) NOZZLES


• Uses a deflector cap to form an umbrella-shaped hollow cone pattern


• Decorative spray


• Fire protection

• Flush cleaning of tube/pipe interiors

• Water curtain

LASER SHEET IMAGE


TECHNICAL REFERENCE

BASIC NOZZLE CHARACTERISTICS

HOLLOW CONE (SPIRAL-TYPE) NOZZLES

Spray Angle Range 50° to 180°

• Produces a circular spray pattern when the fluid exits the voids in the spiral

• Drops are slightly coarser than those in other hollow cone sprays

• Provides a high flow rate in a compact nozzle size

• One-piece design produces maximum throughput for a given pipe size



• Fire protection


SOLID STREAM NOZZLES

Spray Angle Range 0°

• Produces a solid stream spray with the highest impact per unit area


• Cleaning products when complete removal of dirt and debris is required

• Decorative spray ponds

• Laminar flow operations

ATOMIZING (HYDRAULIC, FINE MIST) NOZZLES


• Produces a finely atomized, low capacity spray in a hollow cone pattern without use of compressed air



• Evaporative cooling

• Moisturizing

• Spray drying

AIR ATOMIZING AND AIR ASSISTED NOZZLES


• Produces a variety of cone and flat spray patterns through atomization of liquid by compressed air

• Internal mix impingement atomization forms very fine drops


• Coating

• Evaporative cooling

• Humidification

• Moisturizing

LASER SHEET IMAGE


TECHNICAL REFERENCECAPACITY AND SPECIFIC GRAVITY

CAPACITY – FLUID CAPACITY VARIES WITH SPRAYING PRESSURE

The relationship of pressure and flow with a given orifice is:

Q 1 (P1)n

Q 2 ~

(P2)n

Q = Flow Rate (in gpm or lpm)

P = Liquid pressure (in psi or bar)

n = Flow exponent

To approximate any unknown flow or pressure, use this formula when the other variables are known. The "n" exponent is used to approximate the ratio of pressure to flow based on the type of spray pattern.

Example:To determine the flow rate of water for a 1/4G-10 standard full cone nozzle at 150 psi (10 bar), consult the performance charts in this catalog.

You will find that:

FLOW EXPONENT FOR SPECIFIC NOZZLE TYPES

Nozzle Type Exponent “n”

Hollow Cone Nozzles – All Full Cone Nozzles – Vaneless, 15° and 30° Series Flat Spray Nozzles – All Solid Stream Nozzles – All Spiral Nozzles – All Accessories/Pipe

.50

Full Cone Nozzles – Standard, Square, Oval and Large Capacity

.46

Full Cone Nozzles – Wide Spray and Wide Square Spray

.44

Visit spray.com/sprayware for online flow rate and spray coverage calculators.

SPECIFIC GRAVITY

All capacity tabulations in this catalog are based on water. Since the specific gravity of a liquid affects its flow rate, tabulated catalog capacities must be multiplied by the conversion factor that applies to the specific gravity of the liquid being sprayed as explained below.

Specific gravity is the ratio of the density of a fluid compared to the density of water. The specific gravity of water is defined as 1. When spraying fluids other than water, specific gravity must be considered in the flow calculations.

Using the previous example:

• Fluid sprayed is heavier than water and has a specific gravity of 1.4

• Flow of water at 150 psi = 3.5 gpm

• Heavy fluid (Q2) = Q2(water)*/1/√1.4

Q2 = 3.5 gpm*1/√1.4 = 2.95 gpm

• Fluid sprayed is heavier than water and has a specific gravity of 1.4

• Flow of water at 10 bar = 13.2 lpm

• Heavy fluid (Q2) = Q2(water)*/1/√1.4

Q2 = 13.2 lpm*1/√1.4 = 11.15 lpm

SPECIFIC GRAVITY VERSUS CONVERSION FACTOR

WATER

CON

VER

SIO

N F

AC

TOR

SPECIFIC GRAVITY OF LIQUID

SPECIFIC GRAVITY VERSUS CONVERSION FACTOR

KEY: Conversion factor multiplied by the capacity of the nozzle when spraying water gives the capacity of the nozzle when spraying a liquid with a specific gravity corresponding to the conversion factor. This conversion factor accounts only for the effect of specific gravity on capacity and does not account for other factors affecting capacity.

• The spray angle is 65°

• Flow (Q1) at 40 psi = 1.9 gpm

• Pressure (P1) = 40 psi

• Pressure (P2) = 150 psi

Solving for Q2 = 3.5 gpm

Q1 (1.9 gpm) Q 2 = (P1)n = (40).46

(P2)n (150).46

• The spray angle is 65°

• Flow (Q1) at 3 bar = 7.2 lpm

• Pressure (P1) = 3 bar

• Pressure (P2) = 10 bar

Solving for Q2 = 13.2 lpm

Q1 (7.2 lpm) Q 2 = (P1)n = (3).46

(P2)n (10).46


TECHNICAL REFERENCE

SPRAY PERFORMANCE CONSIDERATIONS

SPRAY ANGLE AND COVERAGE

Tabulated spray angles indicate approximate spray coverage based on spray or distribution of water. In actual spraying, the effective spray angle varies with spray distance. Liquids more viscous than water form relatively smaller spray angles (or even a solid stream), depending upon viscosity, nozzle capacity and spraying pressure. Liquids with surface tensions lower than water will produce relatively wider spray angles than those listed for water. This table lists the theoretical coverage of spray patterns as calculated from the included spray angle of the spray and the distance from the nozzle orifice. Values are based on the assumption that the spray angle remains the same throughout the entire spray distance. In actual practice, the tabulated spray angle does not hold for long spray distances. If the spray coverage requirement is critical, request data sheets for specific spray coverage data.

Example: A spray nozzle with an angle of 65° spraying 15" (39 cm) from the target provides 19.2" (48.8 cm) of coverage

THEORETICAL COVERAGE

SPRAY DISTANCE SPRAY ANGLE

Spray Angle

2in.

5cm

4in.

10cm

6in.

15cm

8in.

20cm

10in.

25cm

12in.

30cm

15in.

40cm

18in.

50cm

24in.

60cm

30in.

70cm

36in.

80cm

48in.

100cm

5°10°15°20°25°

.2

.4

.5

.7

.9

.4

.91.31.82.2

.4

.71.11.41.8

.91.82.63.54.4

.51.11.62.12.7

1.32.64.05.36.7

.71.42.12.83.5

1.83.55.37.18.9

.91.82.63.54.4

2.24.46.68.811.1

1.12.13.24.25.3

2.65.37.910.613.3

1.32.63.95.36.6

3.57.010.514.117.7

1.63.14.76.48.0

4.48.813.217.622.2

2.14.26.38.510.6

5.210.515.821.226.6

2.65.27.910.613.3

6.112.318.424.731.0

3.16.39.512.715.9

7.014.021.128.235.5

4.28.412.616.921.2

8.717.526.335.344.3

30°35°40°45°50°

1.11.31.51.71.9

2.73.23.64.14.7

2.12.52.93.33.7

5.46.37.38.39.3

3.23.84.45.05.6

8.09.5

10.912.414.0

4.35.05.86.67.5

10.712.614.616.618.7

5.46.37.38.39.3

13.415.818.220.723.3

6.47.68.79.911.2

16.118.921.824.928.0

8.19.510.912.414.0

21.425.229.133.137.3

9.711.313.114.916.8

26.831.536.441.446.6

12.815.517.519.922.4

32.237.843.749.756.0

16.118.921.824.828.0

37.544.151.058.065.3

19.322.726.229.833.6

42.950.558.266.374.6

25.730.334.939.744.8

53.663.172.882.893.3

55°60°65°70°75°

2.12.32.52.83.1

5.25.86.47.07.7

4.24.65.15.66.1

10.411.612.714.015.4

6.36.97.68.49.2

15.617.319.121.023.0

8.39.210.211.212.3

20.823.125.528.030.7

10.311.512.714.015.3

26.028.931.935.038.4

12.513.815.316.818.4

31.234.638.242.046.0

15.617.319.221.023.0

41.746.251.056.061.4

18.720.622.925.227.6

52.157.763.770.076.7

25.027.730.533.636.8

62.569.376.584.092.1

31.234.638.242.046.0

72.980.889.298.0107

37.541.645.850.455.2

83.392.4102112123

50.055.461.267.273.6

104115127140153

80°85°90°95°100°

3.43.74.04.44.8

8.49.2

10.010.911.9

6.77.38.08.79.5

16.818.320.021.823.8

10.111.012.013.114.3

25.227.530.032.735.8

13.414.716.017.519.1

33.636.740.043.747.7

16.818.320.021.823.8

42.045.850.054.659.6

20.222.024.026.228.6

50.455.060.065.571.5

25.227.530.032.835.8

67.173.380.087.395.3

30.333.036.039.343.0

83.991.6100109119

40.344.048.052.457.2

101110120131143

50.455.060.065.571.6

118128140153167

60.466.072.078.685.9

134147160175191

80.688.096.0105114

168183200218238

110°120°130°140°150°

5.76.98.6

10.914.9

14.317.321.527.537.3

11.413.917.221.929.8

28.634.642.955.074.6

17.120.825.732.944.7

42.952.064.382.4112

22.827.734.343.859.6

57.169.385.8110149

28.534.642.954.874.5

71.486.6107137187

34.341.651.565.789.5

85.7104129165224

42.852.064.482.2112

114139172220299

51.462.477.398.6

–

143173215275–

68.583.2103––

171208257––

85.6104–––

200243–––

103––––

229––––

–––––

286––––

160°170°

22.745.8

56.7114

45.491.6

113229

68.0–

170–

90.6–

227–

113–

284–

––

––

––

––

––

––

––

––

––

––

––

––

––

––

Visit spray.com/sprayware for online flow rate and spray coverage calculators.

THEORETICAL SPRAY COVERAGE AT VARIOUS DISTANCES IN INCHES (CM) FROM NOZZLE ORIFICE


TECHNICAL REFERENCEPUMP SELECTION GUIDELINES

PUMPS

Every operation using spray nozzles requires a method to provide fluid flow. Fluid flow can be provided by gravity, air pressure or mechanical pumps. It is important to understand that pumping systems provide flow, not pressure. Pressure is the result of restricting flow. The output of an unrestricted pump is 0 psi (bar). When a restriction is placed in the flow, line pressure will result.

The main types of pumps are positive displacement and centrifugal. There are others, but the operational principles are the same as for positive displacement and centrifugal pumps.

Positive displacement pumps

A fixed volume of fluid is delivered for every stroke of a piston, or plunger or rotation of a shaft. Examples include piston pumps, plunger pumps, peristaltic pumps and gear pumps. Positive displacement pumps provide high pressure, and regardless of the system characteristics, will deliver a fixed flow every rotation. These pumps must have an unrestricted bypass valve and a pressure relief valve.

Centrifugal pumps (velocity pumps)

These pumps typically consist of a large vane (impeller) which is turned by a shaft inside a cavity (casing). The geometry of the impeller and casing moves the fluid in a tangential motion. The fluid gets restricted to a smaller volume and is then discharged into the system piping. These types of pumps typically operate at low pressure and high volume. They may also consist of several stages to increase the number of pressures available. These pumps have the unique feature of being able to run while the outlet is blocked. Since the pumps are velocity based, the impeller will spin in the casing fluid without “dead heading” the system itself. It will produce heat and may cavitate the fluid, but it will not build pressure like positive displacement pumps. However, a system bypass and pressure safety valve is still installed in the system to protect components.

HOW PUMP TYPE AFFECTS NOZZLE SELECTION

The flow rates and pressures required by the system will determine the pump choice. There are many styles, sizes and types of pumps available but these general guidelines should prove helpful.

• High flows usually require a centrifugal style pump

• High pressures usually require a positive displacement pump

• Variable Frequency Drive (VFD) pumps may be an option. These pumps allow variable control of speed and flow rates

• Consider the fluid. Specific gravity will affect pump flow rates just as it affects nozzle flow rates

• Pump efficiencies, heat, available power, maintenance and plant conditions should also be considered

PRES

SURE

(FT

OR

M)

PERC

ENT

FLOW (GPM OR LPM)

PRESSURE (PSI OR BAR)

CENTRIFUGAL

CENTRIFUGAL

POSITIVE

POSITIVE

PERFORMANCE

EFFICIENCIES

PERC

ENT

VISCOSITY

CENTRIFUGAL

POSITIVE

FLOW RATES AND FLUIDS100

90

80

80

70

70

60

60

50

50

40

40


TECHNICAL REFERENCE

SPRAY DROP SIZE

SPRAY DROP SIZE (ATOMIZATION)

Accurate drop size information is an important factor in optimizing spray nozzle performance, particularly in industrial applications such as gas cooling, gas conditioning, fire suppression and spray drying.

Drop size refers to the size of the individual spray drops that comprise a nozzle’s spray pattern. Each spray provides a range of drop sizes; this range is referred to as drop size distribution. Drop size distribution is dependent on the spray pattern type and varies significantly from one type to another. The smallest drop sizes are achieved by air atomizing nozzles while the largest drops are produced by full cone hydraulic spray nozzles.

ACTUAL DROP SIZES

• 500 µm

• 1200 µm

• 5500 µm

One inch = 25,400 µm One millimeter = 1,000 µm µm = micrometers

Liquid properties, nozzle capacity, spraying pressure and spray angle also affect drop size. Lower spraying pressures provide larger drop sizes. Conversely, higher spraying pressures yield smaller drop sizes. Within each type of spray pattern the smallest capacities produce the smallest spray drops, and the largest capacities produce the largest spray drops.

DROP SIZE BY SPRAY PATTERN TYPE AT VARIOUS PRESSURES AND CAPACITIES

Spray Pattern

Type

10 psi (0.7 bar) 40 psi (2.8 bar) 100 psi (7 bar)

Capacity VMD Capacity VMD Capacity VMD

gpm lpm microns gpm lpm microns gpm lpm microns

Air Atomizing

.005.02

.02

.0820100

.0088

.0330

15200 12 45 400

Fine Spray .22 .83 375 .03

.43.11.6

110330

.05

.69.2

2.6110290

Hollow Cone

.0512

.1945

3603400

.1024

.3891

3001900

.1638

.61144

2001260

Flat Fan .055

.1918.9

2604300

.1010

.3838

2202500

.1615.8

.6160

1901400

Full Cone .1012

.3845

11404300

.1923

.7287

8502800

.3035

1.1132

5001720

Based on a sampling of nozzles selected to show the wide range of possible drop sizes available.

FOG LIGHT RAIN MODERATE RAIN INTENSE/HEAVY RAIN

10 to 100 100 to 500 500 to 1000 1000 to 5000

VERY SMALL SMALL MEDIUM LARGE

IN MICRONS

RELATIVE DROP SIZE

General drop size categories are used throughout this catalog. Actual drop size will vary based on flow rate and pressure, so for some nozzles, more than one drop size category is shown. If drop size is critical in your application, contact us for specific information.


TECHNICAL REFERENCEDROP SIZE TERMINOLOGY AND IMPACT

DROP SIZE TERMINOLOGY

Terminology is often a major source of discrepancy and confusion in understanding drop size. To accurately compare drop sizes from one nozzle to another, the same diameters have to be used. Drop size is usually expressed in microns (micrometers). Following are the most popular characteristic diameters and their definitions.

VOLUME MEDIAN DIAMETER (VMD) also expressed as Dv0.5 and Mass Median Diameter (MMD)

A means of expressing drop size in terms of the volume of liquid sprayed. The Volume Median Diameter drop size when measured in terms of volume (or mass) is a value where 50% of the total volume of liquid sprayed is made up of drops with diameters larger than the median value and 50% with smaller diameters.

SAUTER MEAN DIAMETER (SMD) also expressed as D32

A means of expressing the fineness of a spray in terms of the surface area produced by the spray. The Sauter Mean Diameter, is the diameter of a drop having the same volume-to-surface area ratio as the total volume of all the drops to the total surface area of all the drops.

NUMBER MEDIAN DIAMETER (NMD) also expressed as DN0.5

A means of expressing drop size in terms of the number of drops in the spray. This means that 50% of the drops by count or number are smaller than the median diameter and 50% of the drops are larger than the median diameter.

More drop size data is available on all types of spray nozzles. For more information contact your local Spraying Systems Co. sales engineer.

IMPACT

Impact, is the measure of force imparted on a surface by a spray pattern at a given distance. It can be expressed in several ways. All definitions are derived from the most basic equation of total impact force. This is the force that any flow, at any pressure, is capable of making on a surface. This does not account for orifice shape, nozzle type, fluid properties and other factors.

I = K x Q x P

Total theoretical impact = constant (based on units) x flow (at pressure P) x square root of pressure (P)

I = total theoretical spray impact

K = constant

Q = flow rate

P = liquid pressure

I lbs.(f) kg(f) Newtons Newtons

K .0526 .024 .24 .745

Q gpm lpm lpm lpm

P psi kg/cm2 bar MPa

The constant (K), is a unit conversion based on the measurement system used. The conversions are listed in the chart above.

Example:

I = .0526 x 3.5 gpm x √150 psi

I = 2.25 lbs(f) is available for distribution throughout the pattern

Contact your local sales engineer for assistance in determining impact in your application.


TECHNICAL REFERENCE

OPERATING PRESSURE AND NOZZLE MATERIALS

OPERATING PRESSURE

The values given in the tabulation sections of this catalog indicate the most commonly used pressure ranges for the associated spray nozzle or accessory.

Contact your local Spraying Systems Co. sales engineer if your application requires pressure ranges beyond those stated in this catalog.

NOZZLE MATERIALS

For each nozzle there is a selection of “standard” materials that have been determined to meet the usual requirements of the applications most commonly associated with that type of nozzle. Standard materials include brass, steel, various stainless steels, hardened stainless steels, many plastics and various carbides. Spray nozzles can also be supplied in other materials upon special request including:

• AMPCO® 8

• CARPENTER® 20 (Alloy 20)

• Ceramics

• CUPRO® NICKEL

• Graphite

• HASTELLOY®

• INCONEL®

• MONEL®

• Nylon

• Polypropylene, PVC and CPVC

• REFRAX®

• Silicon carbide

• Stellite®

• Titanium

• Zirconium

NOZZLE WEAR

Nozzle wear is typically characterized by an increase in nozzle capacity, followed by a general deterioration of the spray pattern. Flat fan spray nozzles with elliptical orifices experience a narrowing of the spray pattern. In other spray pattern types, the distribution within the spray pattern deteriorates without substantially changing the coverage area. The increase in nozzle capacity can sometimes be recognized by a decrease in system operating pressure, particularly when using positive displacement pumps.

Materials having harder surfaces generally provide longer wear life. The chart below provides standard abrasion resistance ratios for different materials to help you determine if you should consider a different material for your nozzles, orifice inserts and/or spray tips.

Materials that offer better corrosion resistance are also available. However, the rate of chemical corrosion on specific nozzle materials is dependent on the solution being sprayed. The corrosive properties of the liquid being sprayed, its percent concentration and temperature, as well as the corrosion resistance of the nozzle material to the chemical must all be considered.

APPROXIMATE ABRASION RESISTANCE RATIOS

Spray Nozzle Material Resistance Ratio

Aluminum 1

Brass 1

Polypropylene 1–2

Steel 1.5–2

MONEL 2–3

Stainless Steel 4–6

HASTELLOY 4–6

Hardened Stainless Steel 10–15

Stellite 10–15

Silicon Carbide (Nitride Bonded) 90–130

Ceramics 90–200

Carbides 180–250

Synthetic Ruby or Sapphire 600–2000

See Trademark Registration and Ownership, page i-1.


TECHNICAL REFERENCEVISCOSITY, TEMPERATURE AND SURFACE TENSION

VISCOSITY

Absolute (dynamic) viscosity is the property of a liquid which resists change in the shape or arrangement of its elements during flow. Liquid viscosity is a primary factor affecting spray pattern formation and, to a lesser degree, capacity. High viscosity liquids – 100 cp or higher – require a higher minimum pressure to begin formation of a spray pattern and provide narrower spray angles as compared to those of water.

TEMPERATURE

The values given in this catalog are based on spraying water at 70°F (21°C). Although liquid temperature changes do not affect the spray performance of a nozzle, they often affect viscosity, surface tension and specific gravity which do influence spray nozzle performance.

SURFACE TENSION

The surface of a liquid tends to assume the smallest possible size; acting, in this respect, like a membrane under tension. Any portion of the liquid surface exerts a tension upon adjacent portions or upon other objects with which it is in contact. This force is in the plane of the surface and its amount per unit of length is surface tension. Its value for water is about 73 dynes per cm at 70°F (21°C). The main effects of surface tension are on minimum operating pressure, spray angle and drop size.

The property of surface tension is more apparent at low operating pressures. A higher surface tension reduces the spray angle, particularly on hollow cone and flat fan spray nozzles. Low surface tensions can allow a nozzle to be operated at a lower pressure.

SUMMARY OF SPRAY PERFORMANCE CONSIDERATIONS

The factors below can affect a spray nozzle’s performance, and the effects can vary based on nozzle type and size. In some applications, there are interrelated factors which may counteract certain effects. For instance, in the case of a hollow cone spray nozzle, increasing the temperature of the liquid decreases the specific gravity, thereby producing a greater flow rate while at the same time decreasing the viscosity which reduces the flow.

NozzleCharacteristics

Increase inOperating Pressure

Increase inSpecific Gravity

Increase inViscosity

Increase inFluid Temperature

Increase inSurface Tension

Pattern Quality Improves Negligible Deteriorates Improves Negligible

Drop Size Decreases Negligible Increases Decreases Increases

Spray Angle Increases then decreases Negligible Decreases Increases Decreases

Capacity Increases DecreasesFull/hollow cone –

increasesFlat – decreases

Depends on fluid sprayedand nozzle used No effect

Impact Increases Negligible Decreases Increases Negligible

Velocity Increases Decreases Decreases Increases Negligible

Wear Increases Negligible Decreases Depends on fluid sprayedand nozzle used No effect


TECHNICAL REFERENCE

PRESSURE DROP

ESTIMATING PRESSURE DROPS THROUGH FLUIDLINE ACCESSORIES

The rated capacities listed in this catalog for valves, strainers and fittings typically correspond to pressure drops of approximately 5% of their maximum operating pressure.

Visit spray.com/sprayware for an online pressure drop calculator. Or contact your local sales engineer.

APPROXIMATE FRICTION LOSS IN PIPE FITTINGS IN EQUIVALENT FEET (METERS) OF STRAIGHT PIPE Use the chart below to determine the equivalent length of pipe through fit tings to equate the friction loss.

Pipe Size StandardWt. (in.)

Actual Inside Dia.in. (mm)

Gate ValveFULL OPEN

ft. (m)

Globe ValveFULL OPEN

ft. (m)

45° Elbowft. (m)

Run of Standard Tee

ft. (m)

Standard Elbow or Run of Tee Reduced 1/2

ft. (m)

Standard Tee Through Side Outlet

ft. (m)

1/8 .269 (6.8) .15 (.05) 8.0 (2.4) .35 (.11) .40 (.12) .75 (.23) 1.4 (.43)

1/4 .364 (9.2) .20 (.06) 11.0 (3.4) .50 (.15) .65 (.20) 1.1 (.34) 2.2 (.67)

1/2 .622 (15.8) .35 (.11) 18.6 (5.7) .78 (.24) 1.1 (.34) 1.7 (.52) 3.3 (1.0)

3/4 .824 (21) .44 (.13) 23.1 (7.0) .97 (.30) 1.4 (.43) 2.1 (.64) 4.2 (1.3)

1 1.049 (27) .56 (.17) 29.4 (9.0) 1.2 (.37) 1.8 (.55) 2.6 (.79) 5.3 (1.6)

1-1/4 1.380 (35) .74 (.23) 38.6 (11.8) 1.6 (.49) 2.3 (.70) 3.5 (1.1) 7.0 (2.1)

1-1/2 1.610 (41) .86 (.26) 45.2 (13.8) 1.9 (.58) 2.7 (.82) 4.1 (1.2) 8.1 (2.5)

2 2.067 (53) 1.1 (.34) 58 (17.7) 2.4 (.73) 3.5 (1.1) 5.2 (1.6) 10.4 (3.2)

2-1/2 2.469 (63) 1.3 (.40) 69 (21) 2.9 (.88) 4.2 (1.3) 6.2 (1.9) 12.4 (3.8)

3 3.068 (78) 1.6 (.49) 86 (26) 3.6 (1.1) 5.2 (1.6) 7.7 (2.3) 15.5 (4.7)

4 4.026 (102) 2.1 (.64) 113 (34) 4.7 (1.4) 6.8 (2.1) 10.2 (3.1) 20.3 (6.2)

5 5.047 (128) 2.7 (.82) 142 (43) 5.9 (1.8) 8.5 (2.6) 12.7 (3.9) 25.4 (7.7)

6 6.065 (154) 3.2 (.98) 170 (52) 7.1 (2.2) 10.2 (3.1) 15.3 (4.7) 31 (9.4)

AIR FLOW (SCFM AND NLPM) THROUGH SCHEDULE 40 STEEL PIPE

AppliedPressure

psig

Nominal Standard Pipe Size (scfm) AppliedPressure

bar

Nominal Standard Pipe Size (nlpm)

1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3"

5 .5 1.2 2.7 4.9 6.6 13.0 27 40 80 135 240 0.3 14.2 34.0 76.5 139 187 370 765 1130 2265 3820 6796

10 .8 1.7 3.9 7.7 11.0 21 44 64 125 200 370 0.7 22.7 48.1 110 218 310 595 1245 1810 3540 5665 10480

20 1.3 3.0 6.6 13.0 18.5 35 75 110 215 350 600 1.4 36.8 85.0 187 370 525 990 2125 3115 6090 9910 16990

40 2.5 5.5 12.0 23 34 62 135 200 385 640 1100 2.8 70.8 155 340 650 960 1755 3820 5665 10900 18120 31150

60 3.5 8.0 18.0 34 50 93 195 290 560 900 1600 4.1 99.1 227 510 965 1415 2630 5520 8210 15860 25485 45305

80 4.7 10.5 23 44 65 120 255 380 720 1200 2100 5.5 133 297 650 1245 1840 3400 7220 10760 20390 33980 59465

100 5.8 13.0 29 54 80 150 315 470 900 1450 2600 6.9 164 370 820 1530 2265 4250 8920 13310 25485 41060 73625


TECHNICAL REFERENCEPRESSURE DROP

FLOW OF WATER THROUGH SCHEDULE 40 STEEL PIPE – PRESSURE DROP

Flow Pressure Drop in psi for Various Pipe Diameters10 ft. Length Pipe Flow Pressure Drop in bar for Various Pipe Diameters

10 m Length Pipe

gpm 1/8" ¼" 3/8" ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 3½" 4" 5" 6" 8" lpm 1/8" ¼" 3/8" ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 3½" 4" 5" 6" 8"

.3 .42 1 .07

.4 .70 .16 1.5 .16 .04

.5 1.1 .24 2 .26 .06

.6 1.5 .33 2.5 .40 .08

.8 2.5 .54 .13 3 .56 .12 .03

1.0 3.7 .83 .19 .06 4 .96 .21 .05 .02

1.5 8.0 1.8 .40 .12 6 2.0 .45 .10 .03

2.0 13.4 3.0 .66 .21 .05 8 3.5 .74 .17 .05 .01

2.5 4.5 1.0 .32 .08 10 1.2 .25 .08 .02

3.0 6.4 1.4 .43 .11 12 1.7 .35 .11 .03

4.0 11.1 2.4 .74 .18 .06 15 2.6 .54 .17 .04 .01

5.0 3.7 1.1 .28 .08 20 .92 .28 .07 .02

6.0 5.2 1.6 .38 .12 25 1.2 .45 .11 .03

8.0 9.1 2.8 .66 .20 .05 30 2.1 .62 .15 .04 .01

10 4.2 1.0 .30 .08 40 1.1 .25 .08 .02

15 2.2 .64 .16 .08 60 .54 .16 .04 .02 .006

20 3.8 1.1 .28 .13 .04 80 .93 .28 .07 .03 .009

25 1.7 .42 .19 .06 100 .43 .12 .05 .01

30 2.4 .59 .27 .08 115 .58 .14 .06 .015

35 3.2 .79 .36 .11 .04 130 .72 .18 .08 .02 .01

40 1.0 .47 .14 .06 150 .23 .10 .03 .012

45 1.3 .59 .17 .07 170 .29 .13 .04 .016

50 1.6 .72 .20 .08 190 .36 .16 .05 .02

60 2.2 1.0 .29 .12 .04 230 .50 .23 .07 .03 .009

70 1.4 .38 .16 .05 260 .32 .09 .04 .01

80 1.8 .50 .20 .07 300 .38 .11 .04 .02 .007

90 2.2 .62 .25 .09 .04 340 .50 .14 .06 .02 .009

100 2.7 .76 .31 .11 .05 380 .61 .18 .07 .03 .01

125 1.2 .47 .16 .08 .04 470 .28 .11 .04 .02 .009

150 1.7 .67 .22 .11 .06 570 .39 .15 .05 .03 .01

200 2.9 1.2 .39 .19 .10 750 .64 .26 .09 .04 .02 .007

250 .59 .28 .15 .05 950 .14 .06 .03 .01

300 .84 .40 .21 .07 1150 .19 .09 .05 .02

400 .70 .37 .12 .05 1500 .16 .08 .03 .01

500 .57 .18 .07 1900 .13 .04 .02

750 .39 .16 .04 2800 .09 .03 .009

1000 .68 .27 .07 3800 .16 .06 .02

2000 1.0 .26 7500 .23 .06

Recommended capacity range for each size is shown in shaded areas. For pipe lengths greater than 10 ft. (3 m), the pressure loss is proportional to the length. For 50 ft. (15 m) of pipe, the pressure drop is approximately 5 times the value in the table.


TECHNICAL REFERENCE

MAINTENANCE TIPS

MAINTAINING SPRAY NOZZLES

Like any precision component, spray nozzles wear over time. Spray nozzle wear can be hard to detect. Small changes in performance can result in quality problems and wasted water, chemicals and electricity. The cost of using worn nozzles can be very significant – tens of thousands of dollars or more per year. Detecting nozzle wear in the early stages can prevent a significant profit drain.

USING NOZZLES THAT ARE SPRAYING JUST 15% OVER THE RATED CAPACITY*

WASTE COST OF EXCESS

WATER 1,701,835 gallons (6,442,146 liters)

US $4,680

CHEMICALS 170,165 gallons (644,145 liters)

US $170,164

WASTEWATER DISPOSAL 1,872,000 gallons (7,086,291 liters)

US $7,956

TOTAL COST OF USING WORN NOZZLES: US $182,800

* Based on total system flow of 100 gpm (379 lpm). Water cost of US $2.75/1000 gallons (3,785 liters). Chemical cost of US $1.00 per gallon (liter) and a dilution ratio of 10:1. System operates 2080 hours per year. Increased electricity cost, scrap and downtime due to quality problems are not included.

DETECTING WORN SPRAY NOZZLES

Visually inspecting nozzles is a start but unless wear is significant, it may not be detectable.

The graphic below illustrates this problem. The spray tip on the left is new and sprays properly. The spray tip on the right is worn and sprays 30% over capacity. The difference is undetectable by inspecting the nozzle, but spray collection data reveals the difference between the two tips.

GOOD SPRAY TIP WORN SPRAY TIP

WATCH FOR THESE SIGNS OF NOZZLE WEAR:

• Quality control issues and increased scrap. Check for uneven coating, cooling, drying or cleaning and changes in temperature, dust content and humidity

• Flow rate change: – For centrifugal pumps: monitor flow meter readings to

detect increases or collect and measure the flow from the spray nozzle for a given period of time at a specific pressure and compare them to flow rate readings from new, unused spray nozzles

– For positive displacement pumps: monitor the liquid line pressure for decreases; the flow rate will remain constant

• Spray pressure in the nozzle manifold: – For centrifugal pumps: monitor for increases in liquid

volume sprayed. The spraying pressure is likely to remain the same

– For positive displacement pumps: monitor pressure gauge for decreases in pressure and reduction in impact on sprayed surfaces. The liquid volume sprayed is likely to remain the same. Also, monitor for increases in pressure due to clogged spray nozzles

• Deterioration of spray pattern quality. Visually inspect the spray pattern for changes. Check the spray angle with a protractor. Measure the width of the spray pattern on the sprayed surface

REPLACING WORN NOZZLES

Inspecting and maintaining your nozzles on a regular basis will help identify wear and extend service life. However, wear will occur over time and the only solution is to replace your nozzles.

Here are a few guidelines to help you determine the optimal replacement interval:

• Are worn nozzles affecting product or process quality? If so, replace nozzles as soon as any wear is evident

• Is water conservation a priority? If so, replace nozzles as soon as wear is evident

• How much are you spending by continuing to use worn nozzles? How do the additional costs for water, chemicals, electricity and wastewater disposal compare with the cost of replacement nozzles?

• Is precise spray performance important to your overall process? If so, you may want to set pre-determined dates for nozzle replacement such as annual or semi-annual maintenance shutdowns

For more information on nozzle maintenance and replacement, visit spray.com. Or, contact your local sales engineer for assistance developing a nozzle maintenance program.


TECHNICAL REFERENCEWEIGHTS, MEASUREMENTS AND FORMULAS

TABLE OF EQUIVALENTS

VOLUMETRIC UNITCubic

CentimeterFluid

OuncePound

of Water Liter US Gallon Cubic Foot Cubic Meter

Cubic Centimeter • .034 2.2 x 10–3 .001 2.64 x 10–4 3.53 x 10–5 1.0 x 10–6

Fluid Ounce 29.4 • .065 .030 7.81 x 10–3 1.04 x 10–3 2.96 x 10–5

Pound of Water 454 15.4 • .454 .12 .016 4.54 x 10–4

Liter 1000 33.8 2.2 • .264 .035 .001

US Gallon 3785 128 8.34 3.785 • .134 3.78 x 10–3

Cubic Foot 28320 958 62.4 28.3 7.48 • .028

Cubic Meter 1.0 x 106 3.38 x 104 2202 1000 264 35.3 •

LIQUID PRESSURE

lb/In2 (psi) Ft Water Kg/Cm2 Atmosphere Bar Inch Mercury kPa (kilopascal)

lb/In2 (psi) • 2.31 .070 .068 .069 2.04 6.895

Ft Water .433 • .030 .029 .030 .882 2.99

Kg/Cm2 14.2 32.8 • .968 .981 29.0 98

Atmosphere 14.7 33.9 1.03 • 1.01 29.9 101

Bar 14.5 33.5 1.02 .987 • 29.5 100

Inch Mercury .491 1.13 .035 .033 .034 • 3.4

kPa (kilopascal) .145 .335 .01 .009 .01 .296 •

LINEAR UNIT

Micron Mil Millimeter Centimeter Inch Foot Meter

Micron • .039 .001 1.0 x 10–4 3.94 x 10–5 – –

Mil 25.4 • 2.54 x 10–2 2.54 x 10–3 .001 8.33 x 10–5 –

Millimeter 1000 39.4 • .10 .0394 3.28 x 10–3 .001

Centimeter 10000 394 10 • .394 .033 .01

Inch 2.54 x 104 1000 25.4 2.54 • .083 .0254

Foot 3.05 x 105 1.2 x 104 305 30.5 12 • .305

Meter 1.0 x 106 3.94 x 104 1000 100 39.4 3.28 •

MISCELLANEOUS UNIT

Unit Equivalent Unit Equivalent

Ounce 28.35 Gr. Acre 43.560 ft2

Pound .4536 Kg. Fahrenheit (°F) = 9/5 (°C) + 32

Horse-Power .746 Kw. Celsius (°C) = 5/9 (°F – 32)

British Thermal Unit .2520 Kg. Cal. Circumference of a Circle = 3.1416 x D

Square Inch 6.452 cm2 Area of a Circle = .7854 x D2

Square Foot .09290 m2 Volume of a Sphere = .5236 x D3

Acre .4047 Hectare Area of a Sphere = 3.1416 x D2

DIMENSIONS

The catalog tabulations show orifice dimensions as “Nom.” (nominal). Specific dimensions are available on request.


TECHNICAL REFERENCE

GENERAL SAFETY INSTRUCTIONS

READ THE FOLLOWING INSTRUCTIONS:

WARNING: All safety related and operating instructions should be read before the nozzle is operated. Follow all operating instructions. Failure to do so could result in serious or fatal injury.

WARNING: It is important to recognize proper safety precautions when using a pressurized spray system. Fluids under pressure can penetrate skin and cause severe injury. Seek medical attention immediately.

WARNING: When dealing with pressure applications, the system pressure should never exceed the lowest rated component. Always know your system and all component capabilities, maximum pressures and flow rates.

WARNING: Before performing any maintenance, make sure all liquid supply lines to the machine are shut off and/or disconnected and chemicals/fluids are drained and not pressurized.

WARNING: The use of any chemicals requires careful control of all worker hygiene. Follow all MSDS or safety precautions provided by the manufacturer.

WARNING: Spraying Systems Co. does not manufacture or supply any of the chemicals used with our nozzles and is not responsible for their effects. Because of the large number of chemicals that could be used and their different chemical reactions, the buyer and user of this equipment should determine compatibility of the materials used and any of the potential hazards involved.

WARNING: Spraying Systems Co. strongly recommends the use of appropriate safety equipment when working with potentially hazardous chemicals.

This equipment includes but is not limited to:

• Protective hat

• Safety glasses or face shield

• Chemical-resistant gloves and apron

• Long sleeve shirt and long pants

WARNING: Before use, be sure appropriate connections are secure and made to withstand weight and reaction forces of the operating unit. NOTE: Always remember to carefully read the chemical

manufacturer’s label and follow all directions.

WARNING: It is important to operate equipment within the temperature range of all components. Also, insure appropriate time lapse or proper safety equipment is used when handling components after they’re exposed to high temperatures.

WARNING: Do not use any equipment outside the intended purposes of the product. Misuse can result in personal injury or product damage.

AIR ATOMIZING S P R A Y N O Z Z L E S

CHEMICAL INJECTION • COATING

DISPENSING • FOGGING • GAS

C O O L I N G • H U M I D I F I C AT I O N

L U B R I C AT I N G • M O I S T U R I Z I N G

MIST ING • MARKING

B1

AIR ATOMIZING NOZZLES

I N T R O D U C T I O N

B2

If your application requires air atomizing nozzles, you’ll find information on the largest selection in the industry available in this section. Choose from dozens of nozzle assemblies and spray set-ups to get the precise performance you require.

Air atomizing nozzles require a single air source for the atomizing air. Versions equipped with clean-out and /or shut-off needles may require an additional air line. Fluid lines are required for all models. The fluid line can be pressurized or supplied using a siphon- or gravity-fed configuration. It is recommended that air and fluid lines are equipped with the proper filters, regulators and valves.

Air atomizing nozzles require spray set-ups. Each set-up consists of an air cap and fluid cap. Some may also include O-rings and retainer caps.

PRODUCT RANGE:

1/8J and 1/4J series nozzles • Available in many configurations. Flow rates range from

0.55 to 58.1 gph at 40 psi (2.08 to 220 l/h at 2.8 bar)

Variable spray nozzles • Independent control of liquid pressure, atomizing air

pressure and fan air pressure enables fine tuning of flow rate, drop size, spray distribution and coverage

1/2J series nozzles • Same features and benefits as 1/8J and 1/4J series

with flow rates ranging from 22.2 to 222 gph at 40 psi (84 to 840 l/h at 2.8 bar)

1J series nozzles • Same features as 1/2J series with flow rates ranging from

120 to 906 gph at 40 psi (454 to 3430 l/h at 2.8 bar)

OPTIMIZATION TIPS

• Reduce installation time by using split-eyelet connectors on both the air and fluid lines. Split-eyelet connectors only require a hole drilled into the pipe, eliminating the need for cutting, threading and brazing operations

• To eliminate the unintentional release of non-atomized liquid, use a check valve to shut down liquid flow if no air pressure is detected

• Use air atomizing nozzles with clean-out needles to eliminate clogging and ensure optimum performance

• Use strainers and air filters to ensure optimum performance

• Use a heat jacket with VAU/VMAU variable spray nozzles to keep viscous liquids warm and transferable

• When adjusting air pressure with internal mix nozzles, do not exceed recommended values as it may result in choking liquid flow. Increasing liquid flow can also choke air flow

OVERVIEW

A I R AT O M I Z I N G N O Z Z L E S

TABLE OF CONTENTS

B3

BASIC INFORMATION Set-Ups B4

1/8J AND 1/4J SERIESNozzle Assemblies: Overview B6Standard Model, with Shut-Off Needle, with Clean-Out Needle, with Shut-Off/Clean-Out Needle B6With Strainer, Back Connect, Top Inlet, Swivel, Miniature, Steam Jacket B7Cluster Type, Twin Spray, Thin Walls, Thick Walls, Screw Mount, 20470 Handheld Spray Gun B8

SPRAY SET-UPS Internal MixRound Spray Air Caps for SU Series Spray Set-Ups B10Wide Angle Round and 360° Circular Spray Air Caps for SU Series Spray Set-Ups B12Flat and Deflected Flat Spray Air Caps for SU Series Spray Set-Ups B14

External MixFlat Spray Air Caps for SUE Series Spray Set-Ups B16

External Mix – Siphon/Gravity-FedFlat Spray Air Caps for SUF Series Spray Set-Ups B20Round Spray Air Caps for SU Series Spray Set-Ups B21

1/8JJ COMPACT SERIESNozzle Assemblies: Overview B22 Standard Model, with Shut-Off Needle, with Clean-Out Needle B22

SPRAY SET-UPS Internal MixRound Spray and 360° Circular Air Caps for SUJ Series Spray Set-Ups B24 Wide Angle Round and Flat Spray Air Caps for SUJ Series Spray Set-Ups B26

External Mix – High CapacityFlat Spray Air Caps for SUJE Spray Set-Ups B28

External Mix – Siphon/Gravity-fed Round Spray Air Caps for SUJ Series Spray Set-Ups B30Flat Spray Air Caps for SUJF Series Spray Set-Ups B31

VAU AND VMAU VARIABLE SPRAY SERIES Nozzle Assemblies: Overview B32VMAU, VAA, VAA with Shut-Off Needle, VAA with Clean-Out Needle, VAA with Shut-Off/Clean-Out Needle, Mounting Kits, VAU, VAU with Plate Mount B32

SPRAY SET-UPS External MixAir Caps for SUVM Series Spray Set-Ups B34Air Caps for SUV Series Spray Set-Ups B37

1/2J SERIESNozzle Assemblies: Overview B39Standard Model, with Shut-Off Needle, with Clean-Out Needle B39With Back Connect, Steam Jacket, Twin Spray, Thick Walls B39

SPRAY SET-UPS Internal MixFlat Spray Air Caps for SU Series Spray Set-Ups B41Wide Angle Round and Round Spray Air Caps for SU Series Spray Set-Ups B41

External MixFlat Spray Air Caps for SUE Series Spray Set-Ups B43

1J SERIESNozzle Assemblies: Overview B44Standard Model, with Shut-Off Needle B44

SPRAY SET-UPS Internal MixWide Angle Round, Round and Flat Spray Air Caps for SU Series Spray Set-Ups B45

External Mix – Siphon/Gravity-fedFlat and Round Spray Air Caps for SUE and SU Series Spray Set-Ups B47

SPECIAL PURPOSE AirJet® Fogger 23412 and QJ25655 Spray Nozzles B48 DripSafe AirJet Fogger 45265 and 45269 Spray Nozzles B50Humidification Spray Nozzles and Units 1/4JH, 45400, YMF, 46215-008 and 1/4JT B52Accessories B55

B4 spray.com | 1.800.95.SPRAY

A I R AT O M I Z I N G N O Z Z L E S B A S I C I N F O R M AT I O NAIR ATOMIZING

Air filter

Siphon height

Air pressure regulator with gauge

Air atomizing nozzle

Siphon tube

Liquid container

Air shut-off valve

Air inlet

SET-UPS

Liquid can be supplied to the nozzle under pressure or it can be supplied through a liquid siphon or gravity-feed.

Pressure Spray Set-Ups• Liquid is supplied to the nozzle under pressure

• Air and liquid can be externally or internally mixed to produce a completely atomized spray

Siphon/Gravity-Fed Spray Set-Ups• Liquid is supplied via liquid siphon or is gravity-fed

• These set-ups are designed to draw liquid through the feed line into the air flow where it is atomized

Liquid strainer

Air pressure regulator

with gauge

Air atomizing

nozzle

Air shut-off valve

Airinlet

Air filter

Liquid inlet

Liquid shut-off valve

Liquid pressure regulator with gauge

B5spray.com | 1.800.95.SPRAY

A I R AT O M I Z I N G N O Z Z L E S B A S I C I N F O R M AT I O N AIR ATOMIZING

• Liquid and air streams are mixed outside of the nozzle

• Air and liquid flow can be controlled independently

• Effective for higher viscosity liquids and abrasive suspensions

• External mix can use siphon set-ups or pressure set-ups

• When a siphon set-up is used, a round spray pattern is produced

• When a pressure set-up is used, a flat spray pattern is produced

EXTERNAL MIX

External mix with siphon set-ups: round spray patterns

External mix with pressure set-ups: flat spray patterns

• Achieved by adjusting the air and liquid pressure in the spray set-up

• Obtaining finer atomization is accomplished by increasing the air pressure and/or lowering the liquid pressure, resulting in a high ratio of air flow rate to liquid flow rate

External mix with pressure set-ups: flat and round spray patterns

ATOMIZATION CONTROLFEATURES

SPRAY SET-UP

• Each nozzle series is available with a pressure spray set-up or siphon spray set-up

• Each set-up provides a specific spray pattern with a specific capacity and spray coverage range performance

• Spray set-ups are interchangeable for each nozzle series

– Round spray: extended full cone round spray pattern

– Wide angle round spray: hollow cone-type, wide angle round spray pattern

– 360° circular spray: hollow cone-type 360° circular spray pattern

– Flat spray: extended flat or sheet-type spray pattern

– Deflected flat spray: extended flat or sheet-type spray diverted away from the axis of the inlet connection

• Each spray set-up consists of an air cap and fluid cap

INTERNAL MIX

• Liquid and air are mixed internally to produce a completely atomized spray

• Liquid and gas streams are not independent and a change in air flow will affect the liquid flow

• Internal mix uses pressure set-ups and is available with the following spray patterns:– 360° circular spray

– Deflected flat spray

– Flat spray

– Round spray

– Wide angle round spray

Internal mix with pressure set-ups: round spray patterns

Internal mix with pressure set-ups: flat spray patterns

Air cap Fluid cap


1 / 8 J A N D 1 / 4 J S E R I E S

NOZZLE ASSEMBLIES

AIR ATOMIZING

FEATURES AND BENEFITS

• The basic J Series nozzle consists of a body and a spray set-up

• Various assemblies can be added to provide shut-off and clean-out functions

• 1/8J and 1/4J bodies have liquid and air feeds at opposite ends of the body

– Bodies are provided with a removable plug so other needle assemblies may be added in the future

• JN features a manual shut-off needle that enables the flow of liquid to the nozzle to be stopped

• JCO features a clean-out needle that is activated manually

– The needle slides through the liquid orifice to clear obstructions

– Ideal for intermittent spraying applications when liquid can dry in the orifice between uses

• 11005 combines the features of JN and JCO offering a combination shut-off/clean-out needle

Shut-off/clean-outneedle assembly

1/8J, 1/4J

1/8JN, 1/4JN

1/8JCO, 1/4JCO

11005–1/8J, 11005–1/4J

1/4JAU – Drip Free

45

61 2 3

41 2 3

Spray set-up

1. Retainer ring CP31992. Air cap3. Fluid cap4. Fluid cap gasket CP36125. Nozzle body CP11516. Back seal gasket CP10439

Spray set-up for Drip Free

Plug CP1159

Shut-offneedle assembly 12810

Clean-outneedle assembly 11829

Shut-off/clean-outneedle assembly 11140

OVERVIEW – 1/8J AND 1/4J SERIES

1/8J, 1/4J 1/8" and 1/4" NPT or BSPT

1/8JN, 1/4JN 1/8" and 1/4" NPT or BSPT

with shut-off needle

1/8JCO, 1/4JCO 1/8" or 1/4" NPT or BSPT

with clean-out needle

11005-1/8J, 1/4J 1/8" or 1/4" NPT or BSPT

with shut-off/clean-out needle


1 / 8 J A N D 1 / 4 J S E R I E S

NOZZLE ASSEMBLIES

AIR ATOMIZING


• 1/4JF features a built-in liquid strainer

• 1/4JFN features built-in liquid strainer and liquid shut-off needle

• JBC features the center lines of the air and liquid inlet entering in the back of the nozzle and parallel to the spray projection axis

• JAC features air and liquid inlet connections entering the nozzle at 90° to spray projection axis

• JACN features air and liquid inlet connections entering the nozzle at 90° to spray projection axis and a shut-off needle

• 1/8-2JAC dual spray assembly features two opposing spray set-ups with the air and liquid inlet connections perpendicular to the spray axis

• The 7545 multiple swivel spray assembly features each spray set-up mounted on its own swivel body

– One or two bodies may be used and each can be rotated 360° to the desired position

– Swivel bodies are locked in place by a stainless steel lock screw that runs vertical through the assembly

• 6552-1/8JAC miniature assembly body is only 1/2" (13 mm) thick with a 1-5/32" (29 mm) by 1-1/4" (32 mm) rectangular face

– The tip of the nozzle projects from the face a maximum of 1-3/16" (30 mm) depending upon the spray set-up used

• 1/4JBCJ features a steam jacket around the nozzle body for spraying liquids that are too viscous to spray at room temperature

With Strainer1/4JF and 1/4JFN

1/4" NPT or BSPT (F)air inlet connection

1/8" NPT or BSPT (F)liquid inlet connection

Back Connect1/8JBC and 1/4JBC

1/8" or 1/4" NPT or BSPT (F)inlet connection

Top Inlet1/8JAC, 1/8JACN1/4JAC, 1/4JACN

1/8" or 1/4" NPT or BSPT (F)inlet connection

Top Inlet1/8-2JAC

1/8" NPT or BSPT (F)inlet connection

Swivel7545

1/8" NPT or BSPT (F)air and liquid inlet connection

Miniature6552-1/8JAC

1/8" NPT or BSPT (F)air and liquid inlet connection

Steam Jacket1/4JBCJ

1/4" NPT or BSPT (F)inlet/outlet connection

Contact your local sales engineer for more information.


1 / 8 J A N D 1 / 4 J S E R I E S

NOZZLE ASSEMBLIES

AIR ATOMIZING


• 8650 multiple spray assembly (cluster type) features five spray set-ups located on the faces of the assembly or four set-ups located on the side faces

• 2J is a dual spray assembly with opposing spray set-ups perpendicular to opposing air and liquid inlets

• Thin wall adapters add an adapter locknut and gasket to CP3376 thick wall adapters to provide secure mounting in thin walls and include CP6378 locknut and CP2804-3 gasket

• Thick wall adapters replace retainer rings on nozzle assemblies and fit into threaded wall openings, holding the nozzle securely in place

• 1/4JDLN and 1/4JDLCO feature a screw mount with 9/32" (7 mm) diameter mounting holes

– Standard 1/4" (6 mm) screws hold the body to the wall with a gasket providing the seal

– The 1/4JDLN features a shut-off needle and the 1/4JDLCO features a clean-out needle

• 20470 Series hand-held air atomizing spray guns feature lightweight aluminum construction and a comfortable, easy-to-operate design

– Extensions are available in up to 36" (91 cm) lengths

Cluster Type 8650

1/4" NPT or BSPT (F) air and liquid inlet connection

Twin Spray 2J

1/4" NPT or BSPT (F)inlet connection

Thin Walls Available for 1/8J

and 1/4J assemblies

Thick Walls 1/8J and 1/4J with 3/4" NPT

or BSPT (M) adapter connection

Screw Mount 1/4" NPT or BSPT (F)

air and liquid inlet connection

20470 Hand-held spray gun

1/4" NPT or BSPT (F) inlet connection



1 / 8 J A N D 1 / 4 J S E R I E S

NOZZLE ASSEMBLIES

AIR ATOMIZING

To order spray set-up only, use spray set-up number and material code: SU11DF-SS.

MATERIALS

Material MaterialCode

Nozzle Type

J JN JCO 11005

Nozzle Bodies

Electroless Nickel-plated Brass (none) l l l l

303 Stainless Steel SS l l l l

Lucite®* LUC l

Spray Set-Ups

Lucite* LUC l

Electroless Nickel-plated Brass Air Cap and 303 Stainless SteelFluid Cap

SSBR l l l l

303 Stainless Steel SS l l l l

*May not be available for all spray set-ups listed. Other materials available upon request.

ORDERING INFORMATION

COMPLETE NOZZLE ASSEMBLY

ExampleInlet

Conn.

Nozzle Body

Assembly Type


Spray Set-up

No.

Material Code

SPRAY SET-UP ONLY

Example

– –Spray

Set-up No. SU11DFMaterial

Code SS

1/4 JN SS– –+ SU11DF SS

* Includes retainer and gasket.

BSPT connections require the addition of a “B” prior to the nozzle body inlet connection. To order Spray Set-Up only, use Spray Set-Up number (shown in performance charts) and material code: SU11 - SS. Add DF to Set-Up number for Drip-Free Set-Ups: SU-11DF - SS. To order fluid cap only, use fluid cap number (shown in performance data charts) and material code: 2050-SS. To order air cap only, use air cap number (shown in performance data charts) and material code: 67147-SS. To order spray nozzle without set-up, use inlet connection, nozzle body and material code: 1/4JN-SS.

NOZZLE BODY* SPRAY SET-UP


1 / 8 J A N D 1 / 4 J S E R I E S P R E S S U R E S P R AY S E T- U P S

INTERNAL MIX | ROUND SPRAY

AIR ATOMIZING

SprayDimensions

Air* Liquid*SprayAngleA (°)

B(in.)

D(ft.)

12

24

36

44

62

10

20

30

40

60

13

13

13

14

15

12

13

14

15-1/2

17-1/2

9

10

11

12-1/2

14-1/2

SpraySet-up

No.

SpraySet-up

Consists ofFluid andAir Cap

Combination

Liquid Capacity (gallons per hour)* and Air Capacity (standard cubic feet per minute)*

Liquid Pressure

10 20 30 40 60

Air Press. gph scfm Air

Press. gph scfm Air Press. gph scfm Air

Press. gph scfm Air Press. gph scfm

SU11

Fluid Cap2050

+Air Cap67147

10.0 .66 .55 14.0 1.50 .40 24 1.68 .56 32 1.86 .68 50 2.28 .98

12.0 .48 .67 18.0 1.23 .50 28 1.44 .63 36 1.62 .80 54 2.05 1.07

14.0 .36 .78 22 .99 .63 32 1.08 .82 40 1.32 .93 58 1.80 1.19

– – – 24 .86 .70 36 .84 .96 44 1.08 1.07 62 1.56 1.36

– – – 26 .72 .76 38 .72 1.03 48 .85 1.23 66 1.32 1.52

– – – 28 .60 .82 40 .66 1.11 50 .72 1.33 68 1.23 1.58

– – – 30 .45 .93 42 .54 1.19 52 .66 1.38 70 1.11 1.66


• For round spray pattern, angle “A” is maintained throughout distance “B”. Beyond “B”, the spray becomes turbulent and will project out to distance “D”

• When using a pressure-fed liquid system, the liquid is supplied to the nozzle under pressure

• The liquid and compressed air or gas are mixed internally to produce a completely atomized spray

1158 retainer ring and 3612 gasket must be ordered separately from the spray set-up, but are included in the standard nozzle assembly. Please contact your sales engineer.

3612 gasket

Round spraypattern

A

D

Air cap

Fluid cap

1158 retainer ring

B

Air Caps Round spray air caps

produce a narrow, full cone round spray pattern

PERFORMANCE DATA ROUND SPRAY *At the stated pressure in psi.



INTERNAL MIX | ROUND SPRAY

AIR ATOMIZING

SprayDimensions


B(in.)

D(ft.)

12

20

34

42

58

10

20

30

40

60

12

13

13

13

15

17

18

19

20

22

12

13

14

15

17

22

34

42

48

60

10

20

30

40

60

12

13

13

14

15

19

20

21

22

23-1/2

13

14

15

16

17-1/2

24

40

55

75

85

10

20

30

40

60

18

20

20

21

21

26

30

32

36

38

16

20

22

26

30

14

26

40

50

70

10

20

30

40

60

17

18

20

20

21

24

27

30

31

36

16

19

22

23

28

14

24

34

44

54

10

20

30

40

60

19

20

21

21

22

35

39

41

42

46

20

23

25

26

30

*At the stated pressure in psi.

SpraySet-up

No.

SpraySet-up


Combination


Liquid Pressure

10 20 30 40 60




SU12A

Fluid Cap2050

+Air Cap73160

10.0 .66 .66 18.0 1.44 .87 24 1.98 1.00 30 2.40 1.14 40 3.30 1.36

12.0 .54 .77 20 1.32 .98 28 1.68 1.17 34 2.16 1.29 46 2.94 1.54

14.0 .42 .90 22 1.20 1.06 32 1.44 1.35 38 1.92 1.47 52 2.58 1.83

– – – 24 1.08 1.16 34 1.32 1.46 42 1.62 1.68 58 2.28 2.09

– – – 26 .90 1.26 36 1.20 1.57 44 1.50 1.78 62 2.10 2.26

– – – – – – 38 1.11 1.66 46 1.38 1.88 66 1.86 2.46

– – – – – – 40 1.02 1.76 48 1.32 1.98 70 1.68 2.67

SU12

Fluid Cap2850

+Air Cap73160

12.0 1.26 .73 22 2.16 1.05 30 2.90 1.24 36 4.32 1.26 48 5.82 1.50

16.0 1.08 .94 26 1.74 1.26 34 2.46 1.42 40 3.85 1.36 52 5.28 1.65

20 .90 1.15 30 1.44 1.47 38 2.10 1.65 44 3.55 1.56 56 4.92 1.73

22 .81 1.25 34 1.26 1.67 42 1.74 1.87 48 2.80 1.78 60 4.56 1.88

24 .78 1.36 38 1.08 1.87 46 1.50 2.03 52 2.46 2.01 64 4.08 2.08

26 .77 1.43 40 1.02 1.96 50 1.24 2.25 56 2.16 2.20 68 3.72 2.25

28 .76 1.56 42 .94 2.04 52 1.20 2.36 60 1.86 2.36 70 3.60 2.34

SU22B

Fluid Cap40100

+Air Cap1401110

16.0 3.44 2.68 28 5.03 3.71 40 6.10 4.72 48 7.75 5.30 65 10.7 6.74

20 2.35 3.20 32 3.70 4.17 44 5.03 5.17 55 5.95 6.07 75 8.67 7.73

22 1.90 3.46 36 2.64 4.65 48 3.95 5.65 65 3.55 7.28 80 7.65 8.25

24 1.54 3.70 40 1.85 5.13 55 2.30 6.50 75 1.95 8.50 85 6.65 8.80

26 1.23 3.97 44 1.30 5.63 60 1.56 7.12 80 1.40 9.10 90 5.64 9.40

28 .96 4.22 48 .90 6.10 65 1.08 7.75 85 1.00 9.70 95 4.63 10.0

30 .72 4.48 50 .76 6.36 70 .73 8.35 90 .72 10.3 100 3.62 10.6

SU22

Fluid Cap60100

+Air Cap1401110

12.0 8.1 2.00 20 13.6 2.55 30 16.3 3.25 38 19.5 3.74 54 25.7 4.66

14.0 6.6 2.32 22 12.0 2.85 34 13.1 3.75 42 16.5 4.20 60 21.8 5.34

16.0 4.9 2.66 24 10.2 3.15 38 9.9 4.32 46 13.6 4.71 65 18.5 5.98

18.0 3.4 3.00 26 8.6 3.45 40 8.7 4.61 50 10.8 5.30 70 15.2 6.68

– – – 28 7.2 3.75 42 7.6 4.90 52 9.6 5.58 75 12.2 7.80

– – – 30 5.9 4.05 44 6.6 5.20 54 8.6 5.85 80 10.0 8.14

– – – 32 4.6 4.35 46 5.6 5.50 56 7.6 6.14 85 8.0 8.90

SU42

Fluid Cap100150

+Air Cap1891125

14.0 11.7 3.05 20 27.5 3.04 28 36.6 3.55 32 49.4 3.31 42 70.6 3.17

16.0 8.5 3.60 22 23.0 3.49 30 32.6 3.96 36 42.2 4.10 46 65.0 3.85

– – – 24 18.0 3.95 32 28.7 4.36 40 35.1 4.90 50 59.0 4.63

– – – 26 14.4 4.40 34 24.8 4.78 44 28.0 5.66 54 53.2 5.40

– – – 28 11.3 4.85 36 20.9 5.20 46 24.5 6.05 58 47.4 6.16

– – – – – – 38 17.5 5.60 48 21.3 6.45 65 37.8 7.54

– – – – – – 40 14.6 6.03 50 18.4 6.86 70 30.0 8.55




INTERNAL MIX | WIDE ANGLE ROUND SPRAY | 360˚ CIRCULAR SPRAY

AIR ATOMIZING

• For wide angle round spray, dimensions “A”, “B” and “C” are the pattern widths at distances from the nozzle

• The total distance of spray projection from the nozzle to the maximum dispersal point is represented by “D”





ABC

15" (38 cm)

6" (15 cm)

9" (23 cm)

D

3612 gasket

Air capFluid cap

1158 retainer ring

Wide angleround spray pattern

Air Caps Wide angle round spray and 360°

circular spray air caps produce hollow cone, wide angle round spray

and 360° circular spray patterns

SprayDimensions

Air* Liquid* A(in.)

B(in.)

C(in.)

D(ft.)

10

20

34

42

60

10

20

30

40

60

5-1/2

6

6-1/2

6-1/2

7-1/2

7

7-1/2

8

8

9

9

9-1/2

10

10-1/2

12

5

6

7

9

13

12

24

34

46

60

10

20

30

40

60

7

7-1/2

7-1/2

8

8-1/2

9-1/2

10

10

10-1/2

11

12-1/2

13

13

13-1/2

14-1/2

6

8

10-1/2

13-1/2

19-1/2

12

22

34

46

65

10

20

30

40

60

7-1/2

8

8

8

8

10

10-1/2

10-1/2

11

11

14

14-1/2

14-1/2

15

15-1/2

7

10-1/2

13-1/2

16-1/2

22-1/2


SpraySet-up

No.

SpraySet-up


Combination


Liquid Pressure

10 20 30 40 60




SU16

Fluid Cap2050

+Air Cap

67-6-20-70°

8.0 1.41 .36 14.0 2.10 .42 22 2.36 .56 30 2.53 .68 44 2.95 .81

10.0 1.14 .43 16.0 1.90 .50 26 2.02 .69 34 2.23 .81 48 2.72 .94

12.0 .79 .50 18.0 1.68 .56 30 1.61 .83 38 1.90 .94 55 2.30 1.20

14.0 .45 .60 20 1.44 .64 34 1.15 1.00 42 1.50 1.1 60 1.92 1.40

– – – 22 1.17 .71 36 .91 1.07 46 1.10 1.26 65 1.50 1.60

– – – 24 .91 .80 38 .68 1.16 48 .90 1.35 70 1.07 1.80

SU26B

Fluid Cap40100

+Air Cap

140-6-37-70°

12.0 1.85 1.78 22 3.30 2.30 30 5.10 2.54 38 6.40 2.84 54 8.76 3.44

14.0 .55 2.20 24 2.20 2.67 32 4.25 2.85 42 4.70 3.42 56 8.10 3.74

– – – 26 1.20 3.05 34 3.35 3.18 44 3.90 3.72 58 7.44 4.03

– – – – – – 36 2.50 3.50 46 3.06 4.05 60 6.76 4.32

– – – – – – 38 1.60 3.85 48 2.25 4.42 65 5.10 5.10

– – – – – – 40 .70 4.30 50 1.40 4.84 70 3.50 6.00

– – – – – – – – – 52 .60 5.34 75 1.85 6.95

SU26

Fluid Cap60100

+Air Cap

140-6-37-70°

10.0 6.3 1.14 20 9.0 1.60 30 11.2 2.04 40 12.4 2.54 56 16.2 2.75

12.0 3.6 1.54 22 6.9 2.00 32 9.3 2.44 42 10.6 2.92 58 14.8 3.11

14.0 2.0 2.00 24 5.1 2.40 34 7.4 2.80 44 8.8 3.33 60 13.8 3.50

– – – 26 3.3 2.80 36 5.4 3.20 46 7.1 3.72 65 9.8 4.42

– – – – – – 38 3.6 3.60 48 5.4 4.14 70 6.5 5.36

– – – – – – 40 2.3 3.98 50 3.6 4.51 75 4.0 6.31

– – – – – – – – – 52 2.2 4.91 80 2.4 6.51

PERFORMANCE DATA WIDE ANGLE ROUND SPRAY *At the stated pressure in psi.



INTERNAL MIX | WIDE ANGLE ROUND SPRAY | 360˚ CIRCULAR SPRAY

AIR ATOMIZING


SpraySet-up

No.

SpraySet-up


Combination


Liquid Pressure

10 20 30 40 60




SU340C

Fluid Cap60150

+Air Cap

189-6-62-160HC

20 4.0 2.45 34 6.6 4.09 50 7.1 6.38 60 11.0 7.6 85 14.4 11.8

22 2.8 2.7 38 4.4 4.8 52 6.2 6.75 65 8.3 8.63 90 12.0 13.0

24 2.0 2.97 42 2.8 5.5 56 4.4 7.55 70 6.1 9.78 95 9.8 14.1

26 1.5 3.3 46 1.7 6.34 60 3.2 8.41 80 3.1 12.44 100 7.8 15.4

28 1.1 3.62 48 1.3 6.85 70 1.3 11.75 90 1.4 15.4 – – –

SprayDimensions

Air* Liquid* A(in.)

B(in.)

C(in.)

D(ft.)

28

42

65

85

90

10

20

30

40

60

8

8

8-1/2

9

9-1/2

10

10-1/2

11

11-1/2

12-1/2

13

13-1/2

14-1/2

15

16

18

21

27

30

34

22

40

50

70

90

10

20

30

40

60

6

6-1/2

6-1/2

7

7-1/2

7-1/2

8

8

8-1/2

9-1/2

9

9-1/2

9-1/2

10

11

9

15

18

24

31

28

46

60

75

90

10

20

30

40

60

9-1/2

10

11

11-1/2

13

13

13-1/2

14-1/2

15

16-1/2

18

18-1/2

20

21

23

18

21

24

26

32


SpraySet-up

No.

SpraySet-up


Combination


Liquid Pressure

10 20 30 40 60




SU29

Fluid Cap60100

+Air Cap

140-6-52-70°

18.0 9.4 3.0 30 13.4 4.15 44 15.3 5.45 60 15.6 7.05 80 21.4 8.55

22 7.7 3.6 34 11.9 4.65 48 13.8 5.9 70 12.5 8.25 85 19.5 9.15

26 6.0 4.13 38 10.3 5.1 55 11.3 6.75 80 9.3 9.45 90 17.9 9.75

28 5.2 4.4 42 8.9 5.6 65 7.8 8.0 85 7.8 10.05 95 16.5 10.35

30 4.4 4.7 46 7.3 6.1 70 6.1 8.6 90 6.2 10.7 100 15.1 10.95

32 3.7 5.0 50 5.8 6.65 75 4.5 9.25 95 4.8 11.3 – – –

34 3.0 5.25 60 2.4 7.95 80 3.3 9.85 100 3.7 11.9 – – –

SU30

Fluid Cap40100

+Air Cap

120-6-35-60°

16.0 3.24 1.43 28 4.60 1.96 42 5.27 2.67 55 5.69 3.30 80 7.10 4.50

18.0 2.61 1.59 32 3.37 2.27 46 4.0 2.96 60 4.24 3.68 85 5.80 4.88

20 2.08 1.75 36 2.45 2.55 48 3.45 3.11 65 3.15 4.06 90 4.65 5.27

22 1.62 1.90 40 1.75 2.85 50 3.03 3.26 70 2.31 4.44 95 3.75 5.65

24 1.30 2.06 42 1.45 3.00 55 2.11 3.63 75 1.72 4.82 100 3.00 6.03

26 1.04 2.20 44 1.21 3.14 60 1.47 3.98 80 1.32 5.20 – – –

28 .82 2.35 46 1.0 3.28 65 1.03 4.36 85 1.05 5.58 – – –

SU46

Fluid Cap100150

+Air Cap

189-6-62-70°

24 6.7 5.5 38 10.7 7.4 48 16.5 8.8 60 18.6 10.4 85 29.2 13.7

26 5.2 5.9 42 7.6 8.3 52 12.5 9.6 65 13.7 11.4 90 24.6 14.7

28 4.0 6.3 44 6.2 8.7 56 9.2 10.4 70 10.0 12.4 95 20.7 15.8

30 3.0 6.8 46 5.0 9.1 60 6.6 11.3 75 7.4 13.5 100 17.5 16.9

32 2.0 7.2 48 4.0 9.5 62 5.6 11.7 80 5.5 14.5 – – –

– – – 50 3.0 9.9 65 4.4 12.3 85 4.0 15.5 – – –

– – – 52 2.4 10.3 70 2.6 13.3 90 2.5 16.6 – – –

360° circular spray pattern


360° CIRCULAR SPRAY *At the stated pressure in psi.



INTERNAL MIX | FLAT SPRAY | DEFLECTED FLAT SPRAY

AIR ATOMIZING

SprayDimensions

Air* Liquid* A(in.)

B(in.)

C(in.)

D(ft.)

16

30

40

50

85

10

20

30

40

60

10

14

15

18-1/2

22

14

19

21

24

29

18

26

30

34

37

8-1/2

10

10-1/2

11

13

16

30

42

50

80

10

20

30

40

60

14

17

20

23

23

18

24

26

30

30

28

32

35

38

38

7

8

8-1/2

9

10-1/2

20

34

46

54

75

10

20

30

40

60

4

5

5

6

8

5

6

7

9

10

7

8

9

11

13

10

12

13

14

16


SpraySet-up

No.

SpraySet-up


Combination


Liquid Pressure

10 20 30 40 60




SU13A

Fluid Cap2050

+Air Cap73328

10.0 1.44 .84 18.0 2.17 1.12 28 2.49 1.47 38 2.77 1.84 55 3.41 2.43

12.0 1.25 .96 22 1.82 1.31 32 2.19 1.64 42 2.49 2.01 65 2.83 2.85

14.0 1.09 1.08 26 1.50 1.50 36 1.89 1.82 46 2.20 2.19 75 2.26 3.26

16.0 .93 1.20 30 1.20 1.68 40 1.58 2.00 50 1.93 2.37 85 1.69 3.67

18.0 .79 1.32 34 .93 1.87 44 1.30 2.18 60 1.25 2.81 90 1.40 3.88

20 .65 1.43 38 .68 2.07 48 1.03 2.36 65 .93 3.02 95 1.13 4.09

22 .53 1.55 40 .57 2.16 55 .65 2.68 70 .65 3.25 100 .88 4.29

SU13

Fluid Cap2850

+Air Cap73328

12.0 2.17 .70 20 3.35 .96 30 3.98 1.27 38 4.66 1.49 65 4.8 2.38

14.0 1.80 .82 24 2.71 1.14 34 3.41 1.45 42 4.14 1.65 70 4.21 2.62

16.0 1.45 .95 28 2.06 1.34 38 2.85 1.64 46 3.6 1.85 75 3.63 2.86

18.0 1.08 1.07 30 1.76 1.45 42 2.29 1.85 50 3.08 2.05 80 3.05 3.10

20 .77 1.2 32 1.44 1.56 46 1.72 2.07 60 1.76 2.58 85 2.48 3.35

– – – 34 1.18 1.67 48 1.43 2.18 65 1.2 2.84 90 1.98 3.60

– – – 36 .94 1.78 50 1.2 2.28 70 .76 3.09 95 1.57 3.85

SUN13

Fluid Cap2850

+Air Cap73335

14.0 2.4 .89 22 3.2 1.13 34 3.4 1.63 40 4.4 1.77 60 5.0 2.53

16.0 2.1 1.05 26 2.8 1.38 38 2.9 1.86 44 3.8 1.99 65 4.4 2.73

18.0 1.7 1.14 30 2.1 1.62 42 2.3 2.07 48 3.3 2.22 70 3.9 3.00

20 1.4 1.26 34 1.5 1.87 46 1.8 2.36 54 2.6 2.55 75 3.4 3.25

24 .81 1.54 38 1.2 2.1 50 1.4 2.58 60 1.9 2.98 80 3.0 3.57

28 .54 1.76 42 .72 2.38 60 .60 3.16 70 1.1 3.53 90 2.3 4.12

32 .30 1.96 48 .39 2.69 70 .33 3.65 85 .40 4.27 100 2.0 4.65

PERFORMANCE DATA FLAT SPRAY *At the stated pressure in psi.


• For flat spray pattern, dimensions “A”, “B” and “C” are the pattern widths at distances from the nozzle





AB

C

15" (38 cm)

6" (15 cm)

9" (23 cm)

D

3612 gasket

Air capFluid cap

1158 retainer ring

Flat spraypattern

Air Caps Flat spray and deflected flat spray air caps produce flat or deflected

flat spray patterns



INTERNAL MIX | FLAT SPRAY | DEFLECTED FLAT SPRAY

AIR ATOMIZING

SpraySet-up

No.

SpraySet-up


Combination


Liquid Pressure

10 20 30 40 60




SU240E

Fluid Cap28150

+Air Cap

189110-75°

6.0 2.9 1.6 14.0 3.9 2.6 22 4.7 3.3 26 5.8 3.6 38 7.4 4.68.0 2.5 1.9 16.0 3.5 2.8 24 4.3 3.6 32 4.8 4.4 46 6.4 5.5

10.0 2.0 2.3 18.0 3.1 3.1 26 4.0 3.8 38 3.8 5.3 54 5.3 6.612.0 1.5 2.7 20 2.8 3.5 30 3.3 4.5 44 2.8 6.2 62 4.2 7.8

– – – 22 2.3 3.8 34 2.3 5.2 46 2.3 6.6 70 2.8 9.4

SprayDimensions

Air* Liquid* A(in.)

B(in.)

C(in.)

D(ft.)

22

38

46

60

80

10

20

30

40

60

10

14

23

24

25

13

20

29

29

30

18

27

36

37

38

6

6-1/2

6-1/2

7

7-1/2

16

30

40

52

70

10

20

30

40

60

4

4

5

6

8

5

5

7

8

10

6

7

9

11

14

8

10

11

12

13

2032425475

1020304060

69101213

711131516

813181819

1010-1/2

1111-1/2

13

16

32

46

56

85

10

20

30

40

60

7

9

10

12

13

9

12

13

15

16

12

16

17

19

20

11

11-1/2

12

12-1/2

14-1/2

14

26

38

48

70

10

20

30

40

60

7

10

10

13

14

8

12

12

16

17

10

17

18

21

23

11

12-1/2

14

15

17


SpraySet-up

No.

SpraySet-up


Combination


Liquid Pressure

10 20 30 40 60




SU14

Fluid Cap2850

+Air Cap73320

18.0 1.04 1.05 30 1.56 1.43 42 2.06 1.75 55 2.16 2.15 75 3.20 2.6620 .80 1.15 34 1.10 1.61 44 1.80 1.85 60 1.60 2.38 80 2.66 2.9022 .62 1.25 36 .90 1.70 46 1.57 1.94 65 1.15 2.62 85 2.19 3.1324 .47 1.35 38 .74 1.79 48 1.35 2.04 70 .76 2.85 90 1.75 3.3626 .35 1.45 40 .60 1.88 50 1.13 2.13 – – – – – –28 .25 1.55 42 .47 1.97 55 .70 2.36 – – – – – –– – – 44 .35 2.07 – – – – – – – – –

SUN23

Fluid Cap60100

+Air Cap125340

14.0 4.5 .80 24 7.5 1.24 34 9.5 1.74 44 11.1 2.2 56 19.8 2.5616.0 2.9 .97 26 6.0 1.44 36 7.8 1.96 46 9.7 2.46 60 16.7 2.9718.0 2.0 1.17 28 4.5 1.68 38 6.5 2.2 48 8.4 2.69 65 13.5 3.520 .84 1.42 30 3.4 1.82 40 5.2 2.53 52 5.7 3.3 70 9.7 4.33– – – 32 2.4 2.06 42 4.1 2.65 56 3.9 3.84 80 4.8 5.73– – – 34 1.3 2.32 46 2.6 3.25 60 2.4 4.36 90 1.8 7.4– – – 36 .80 2.61 50 1.1 3.72 65 1.1 5.04 95 .70 8.38

SU23B

Fluid Cap40100

+Air Cap125328

16.0 2.95 1.92 28 4.45 2.66 38 5.94 3.22 46 7.50 3.66 65 9.70 4.8018.0 2.25 2.10 30 3.87 2.84 40 5.40 3.40 50 6.45 3.97 70 8.60 5.2020 1.72 2.30 32 3.30 3.04 42 4.86 3.55 52 5.90 4.15 75 7.50 5.6022 1.32 2.50 34 2.78 3.22 44 4.32 3.74 54 5.40 4.32 80 6.40 6.0024 1.00 2.70 36 2.28 3.40 46 3.78 3.93 56 4.87 4.50 85 5.30 6.48– – – – – – 48 3.25 4.12 58 4.34 4.70 90 4.25 6.96

SU23

Fluid Cap60100

+Air Cap125328

12.0 7.0 1.15 22 11.5 1.65 34 12.4 2.20 46 13.7 2.75 65 18.3 3.5614.0 5.4 1.35 26 8.3 2.02 38 9.8 2.57 50 10.9 3.14 75 12.6 4.4716.0 4.2 1.57 30 6.0 2.40 42 7.8 2.95 54 8.7 3.51 80 10.6 4.9518.0 3.3 1.69 32 5.1 2.60 46 5.9 3.34 56 7.8 3.70 85 8.7 5.4020 2.7 1.97 34 4.3 2.78 48 5.0 3.52 60 6.4 4.06 90 6.9 5.8522 2.0 2.20 36 3.6 2.97 50 4.3 3.71 65 4.6 4.53 95 5.5 6.30– – – 38 3.0 3.16 52 3.7 3.90 70 3.3 5.00 100 4.5 6.76

SU43

Fluid Cap100150

+Air Cap189351

14.0 7.7 3.17 26 10.5 4.55 34 20.8 4.75 42 29.4 5.15 58 44.7 6.0516.0 5.0 3.83 28 7.0 5.15 36 16.6 5.25 44 25.1 5.6 60 41.0 6.42

– – – – – – 38 12.8 5.8 46 20.8 6.05 65 31.4 7.45– – – – – – 40 9.5 6.35 48 16.7 6.6 70 22.5 8.75– – – – – – 42 6.7 6.85 50 13.1 7.15 75 15.0 10.1– – – – – – – – – 52 10.0 7.75 80 8.7 11.45– – – – – – – – – 54 7.3 8.3 – – –

Deflected flat spray pattern


DEFLECTED FLAT SPRAY *At the stated pressure in psi.



EXTERNAL MIX | FLAT SPRAY

AIR ATOMIZING

SprayDimensions

Air* Liquid* A(in.)

B(in.)

C(in.)

D(ft.)

3

15

20

20

25

40

70

3

3

5

20

10

20

40

3-1/2

3-1/2

4

4-1/2

4-1/2

5

6

6

6

6

7

6

7

7

9

9

9

10

9-1/2

11

9-1/2

3

4

4

5

5

6

8

SpraySet-up

No.

SpraySet-up


Combination


Liquid Pressure

3 5 10 20 40




SUE15B

Fluid Cap1650

+Air Cap

67228-45°

3.0 .80 .89 5.0 1.0 .93 10.0 1.4 1.1 20 2.0 1.6 40 2.8 2.6

5.0 .80 .93 10.0 1.0 1.1 15.0 1.4 1.4 25 2.0 1.9 50 2.8 3.0

10.0 .80 1.1 15.0 1.0 1.4 20 1.4 1.6 30 2.0 2.1 60 2.8 3.6

15.0 .80 1.4 20 1.0 1.6 25 1.4 1.9 40 2.0 2.6 70 2.8 4.2

20 .80 1.6 25 1.0 1.9 30 1.4 2.1 50 2.0 3.0 75 2.8 4.5

25 .80 1.9 30 1.0 2.1 40 1.4 2.6 60 2.0 3.6 80 2.8 4.9

30 .80 2.1 40 1.0 2.6 50 1.4 3.0 80 2.0 4.9 90 2.8 5.6



• Atomization can be controlled by varying the air pressure without changing liquid flow rates with external mix set-ups

• For flat spray, dimensions “A”, “B” and “C” are the pattern widths at distances from the nozzle



• The liquid and compressed air or gas are mixed externally to produce a completely atomized spray

ABC

15" (38 cm)

6" (15 cm)

9" (23 cm)

D

3612 gasket

Air capFluid cap

1158 retainer ring

Flat spraypattern


Air Caps External mix air caps

produce a flat spray pattern




AIR ATOMIZING

SprayDimensions

Air* Liquid* A(in.)

B(in.)

C(in.)

D(ft.)

68815201520

5102020203040

891111101112

11121413121415

13161817161920

46689

8-1/29

5

20

25

25

30

50

75

3

3

5

20

10

20

40

3

3-1/2

4

5

5

5

6

5-1/2

6

6-1/2

7-1/2

7

8-1/2

7-1/2

8-1/2

8-1/2

9

11-1/2

10

12

10

3-1/2

5-1/2

6

7

6

8

10

10151020352525

5102020203040

11121514131516

13151817161819

16192322202326

5768109

9-1/2

10

25

30

35

40

60

75

3

3

5

20

10

20

40

5

5

5

5-1/2

5-1/2

5-1/2

6-1/2

6-1/2

6-1/2

7

8

7-1/2

8

8

10

10

9-1/2

12-1/2

12

14

12

4

6

6

6

7-1/2

10

13

881015202530

5102020203040

14141516171616

19191920212020

24252526262727

656789

9-1/2


SpraySet-up

No.

SpraySet-up


Combination


Liquid Pressure

3 5 10 20 40




SUE18B

Fluid Cap1650

+Air Cap

62240-60°

5.0 .80 .78 5.0 1.0 .78 6.0 1.4 .88 8.0 2.0 1.0 10.0 2.8 1.2

6.0 .80 .88 6.0 1.0 .88 8.0 1.4 1.0 10.0 2.0 1.2 15.0 2.8 1.6

7.0 .80 .97 8.0 1.0 1.0 10.0 1.4 1.2 15.0 2.0 1.6 25 2.8 2.2

8.0 .80 1.0 10.0 1.0 1.2 12.0 1.4 1.4 20 2.0 1.9 35 2.8 2.8

SUE15A

Fluid Cap2050

+Air Cap

67228-45°

5.0 1.2 .93 10.0 1.6 1.1 15.0 2.2 1.4 25 3.1 1.9 45 4.4 2.9

10.0 1.2 1.1 15.0 1.6 1.4 20 2.2 1.6 30 3.1 2.1 50 4.4 3.0

15.0 1.2 1.4 20 1.6 1.6 25 2.2 1.9 40 3.1 2.6 60 4.4 3.6

20 1.2 1.6 25 1.6 1.9 30 2.2 2.1 50 3.1 3.0 70 4.4 4.2

25 1.2 1.9 30 1.6 2.1 40 2.2 2.6 60 3.1 3.6 75 4.4 4.5

30 1.2 2.1 40 1.6 2.6 50 2.2 3.0 70 3.1 4.2 90 4.4 5.6

40 1.2 2.6 50 1.6 3.0 60 2.2 3.6 90 3.1 5.6 95 4.4 5.8

SUE18A

Fluid Cap2050

+Air Cap

62240-60°

5.0 1.2 .78 5.0 1.6 .78 8.0 2.2 1.0 10.0 3.1 1.2 15.0 4.4 1.6

8.0 1.2 1.0 10.0 1.6 1.2 10.0 2.2 1.2 20 3.1 1.9 20 4.4 1.9

10.0 1.2 1.2 15.0 1.6 1.6 20 2.2 1.9 30 3.1 2.5 30 4.4 2.5

15.0 1.2 1.6 20 1.6 1.9 30 2.2 2.5 35 3.1 2.8 35 4.4 2.8

SUE15

Fluid Cap2850

+Air Cap

67228-45°

10.0 2.3 1.1 15.0 3.0 1.4 20 4.2 1.6 35 6.0 2.4 50 8.4 3.0

15.0 2.3 1.4 20 3.0 1.6 25 4.2 1.9 40 6.0 2.6 60 8.4 3.6

20 2.3 1.6 25 3.0 1.9 30 4.2 2.1 50 6.0 3.0 70 8.4 4.2

25 2.3 1.9 30 3.0 2.1 40 4.2 2.6 60 6.0 3.6 75 8.4 4.5

30 2.3 2.1 40 3.0 2.6 50 4.2 3.0 70 6.0 4.2 80 8.4 4.9

40 2.3 2.6 50 3.0 3.0 60 4.2 3.6 80 6.0 4.9 90 8.4 5.6

50 2.3 3.0 60 3.0 3.6 70 4.2 4.2 90 6.0 5.6 100 8.4 6.2

SUE18

Fluid Cap2850

+Air Cap

62240-60°

6.0 2.3 .88 6.0 3.0 .88 6.0 4.2 .88 10.0 6.0 1.2 20 8.4 1.9

7.0 2.3 .97 8.0 3.0 1.0 8.0 4.2 1.0 12.0 6.0 1.4 25 8.4 2.2

8.0 2.3 1.0 9.0 3.0 1.1 10.0 4.2 1.2 15.0 6.0 1.6 30 8.4 2.5

10.0 2.3 1.2 10.0 3.0 1.2 12.0 4.2 1.4 20 6.0 1.9 35 8.4 2.8





AIR ATOMIZING

SprayDimensions

Air* Liquid* A(in.)

B(in.)

C(in.)

D(ft.)

10

25

30

35

35

60

70

3

3

5

10

20

20

40

5

5

6

6

6-1/2

6-1/2

6-1/2

7-1/2

7-1/2

7-1/2

8-1/2

9

9

8-1/2

10

10

11

11

14

14-1/2

12-1/2

5-1/2

9

10

11-1/2

12

14

16

20303045605560

5102020203040

13131415151615

15161819192020

19222326252728

12-1/2141315171516

10

25

35

40

40

60

75

3

3

5

10

20

20

40

6

6

6

6

6-1/2

6-1/2

7

7-1/2

7-1/2

8-1/2

8-1/2

10

10

9

10-1/2

10-1/2

13

14

14-1/2

14-1/2

14

7

10

11

12-1/2

13

16

19

15253545606070

3102020203040

13141513121313

15191817171717

20252524232424

11-1/210

12-1/214161713

30404565805590

5102020203040

16181917151916

22232321202522

30323130263331

12131416191419


SpraySet-up

No.

SpraySet-up


Combination


Liquid Pressure

3 5 10 20 40




SUE25B

Fluid Cap35100

+Air Cap

134255-45°

10.0 3.6 3.0 15.0 4.7 3.6 20 6.6 4.1 35 9.4 6.3 45 13.2 7.5

15.0 3.6 3.6 20 4.7 4.1 25 6.6 4.9 40 9.4 6.9 50 13.2 8.2

20 3.6 4.1 25 4.7 4.9 30 6.6 5.5 50 9.4 8.0 55 13.2 9.0

25 3.6 4.9 30 4.7 5.5 35 6.6 6.3 60 9.4 9.4 60 13.2 9.7

30 3.6 5.5 40 4.7 6.9 40 6.6 6.9 70 9.4 11.0 70 13.2 11.1

40 3.6 6.9 50 4.7 8.0 50 6.6 8.0 80 9.4 12.7 80 13.2 12.7

50 3.6 8.0 60 4.7 9.4 60 6.6 9.4 90 9.4 14.5 90 13.2 14.5

SUE28B

Fluid Cap35100

+Air Cap

122281-60°

8.0 3.6 3.2 10.0 4.7 3.6 20 6.6 5.5 30 9.4 7.4 45 13.2 10.0

10.0 3.6 3.6 15.0 4.7 4.6 30 6.6 7.4 40 9.4 9.1 60 13.2 12.6

15.0 3.6 4.6 25 4.7 6.5 35 6.6 8.3 50 9.4 10.9 75 13.2 15.2

20 3.6 5.5 30 4.7 7.4 40 6.6 9.1 60 9.4 12.6 80 13.2 16.0

SUE25A

Fluid Cap40100

+Air Cap

134255-45°

10.0 4.8 3.0 20 6.1 4.1 25 8.7 4.9 40 12.3 6.9 50 17.4 8.2

15.0 4.8 3.6 25 6.1 4.9 30 8.7 5.5 45 12.3 7.5 60 17.4 9.7

20 4.8 4.1 30 6.1 5.5 35 8.7 6.3 50 12.3 8.0 70 17.4 11.1

25 4.8 4.9 35 6.1 6.3 40 8.7 6.9 60 12.3 9.4 75 17.4 12.0

30 4.8 5.5 40 6.1 6.9 50 8.7 8.0 70 12.3 11.0 80 17.4 12.7

40 4.8 6.9 50 6.1 8.0 60 8.7 9.4 80 12.3 12.7 90 17.4 14.5

50 4.8 8.0 60 6.1 9.4 70 8.7 11.0 90 12.3 14.5 95 17.4 15.1

SUE28A

Fluid Cap40100

+Air Cap

122281-60°

8.0 4.8 3.2 10.0 6.1 3.6 15.0 8.7 4.6 35 12.3 8.3 50 17.4 10.9

15.0 4.8 4.6 20 6.1 5.5 25 8.7 6.5 45 12.3 10.0 65 17.4 13.5

20 4.8 5.5 25 6.1 6.5 35 8.7 8.3 55 12.3 11.7 85 17.4 16.8

25 4.8 6.5 30 6.1 7.4 40 8.7 9.1 60 12.3 12.6 95 17.4 18.5

SUE28

Fluid Cap60100

+Air Cap

122281-60°

10.0 9.9 3.6 15.0 12.7 4.6 25 18.0 6.5 45 25.5 10.0 75 36.0 15.2

15.0 9.9 4.6 20 12.7 5.5 30 18.0 7.4 50 25.5 10.9 85 36.0 16.8

20 9.9 5.5 30 12.7 7.4 40 18.0 9.1 70 25.5 14.3 95 36.0 18.5

25 9.9 6.5 35 12.7 8.3 45 18.0 10.0 80 25.5 16.0 100 36.0 19.4





AIR ATOMIZING

SprayDimensions

Air* Liquid* A(in.)

B(in.)

C(in.)

D(ft.)

15

30

40

45

50

60

80

3

3

5

20

10

20

40

6

6

7

8

7-1/2

8

7

8

8-1/2

9-1/2

11

10-1/2

11

9-1/2

10

11-1/2

14

15-1/2

15

15-1/2

15

9

10

11-1/2

12

13

14

19-1/2

25

40

40

50

55

60

70

3

3

5

10

20

15

20

6

6

6

6-1/2

6-1/2

6-1/2

6-1/2

8

8

8

8-1/2

8-1/2

9

9

11-1/2

12

12

12-1/2

13-1/2

13

13-1/2

10

11

13

14

15

15-1/2

18

30

45

55

70

70

75

80

3

3

5

10

20

15

20

6-1/2

7

7

7

8

7

8

9-1/2

9-1/2

10

10

10

10

10

13-1/2

14

14

14

15

15

15

11-1/2

14

16

18

18

19

20

40

55

65

75

80

80

85

3

3

5

10

15

20

20

7-1/2

8

8

8-1/2

8-1/2

8-1/2

8-1/2

10

10

10

10-1/2

10-1/2

10-1/2

10-1/2

14

14-1/2

14-1/2

15

16

16

16

15

16

17

18

18

19

20


SpraySet-up

No.

SpraySet-up


Combination


Liquid Pressure

3 5 10 20 40




SUE25

Fluid Cap60100

+Air Cap

134255-45°

15.0 9.9 3.6 25 12.7 4.9 35 18.0 6.3 45 25.5 7.5 55 36.0 9.0

20 9.9 4.1 30 12.7 5.5 40 18.0 6.9 50 25.5 8.0 60 36.0 9.7

25 9.9 4.9 35 12.7 6.3 45 18.0 7.5 55 25.5 8.7 65 36.0 10.5

30 9.9 5.5 40 12.7 6.9 50 18.0 8.0 60 25.5 9.4 70 36.0 11.1

35 9.9 6.3 45 12.7 7.5 60 18.0 9.4 70 25.5 11.0 80 36.0 12.7

40 9.9 6.9 50 12.7 8.0 70 18.0 11.0 80 25.5 12.7 90 36.0 14.5

50 9.9 8.0 60 12.7 9.4 80 18.0 12.7 90 25.5 14.5 100 36.0 16.0

SUE45B

Fluid Cap60150

+Air Cap

200278-45°

25 10.0 8.3 25 12.9 8.3 35 18.0 10.5 55 25.5 14.5 – – –

30 10.0 9.2 30 12.9 9.2 40 18.0 11.6 60 25.5 15.7 – – –

35 10.0 10.5 35 12.9 10.5 45 18.0 12.5 65 25.5 17.0 – – –

40 10.0 11.6 40 12.9 11.6 50 18.0 13.4 70 25.5 18.4 – – –

45 10.0 12.5 45 12.9 12.5 55 18.0 14.5 75 25.5 20.0 – – –

50 10.0 13.4 50 12.9 13.4 60 18.0 15.7 80 25.5 21.2 – – –

60 10.0 15.7 60 12.9 15.7 70 18.0 18.4 90 25.5 24.2 – – –

SUE45A

Fluid Cap80150

+Air Cap

200278-45°

30 17.4 9.2 40 22.5 11.6 55 31.5 14.5 70 44.7 18.4 – – –

35 17.4 10.5 45 22.5 12.5 60 31.5 15.7 75 44.7 20.0 – – –

40 17.4 11.6 50 22.5 13.4 65 31.5 17.0 80 44.7 21.2 – – –

45 17.4 12.5 55 22.5 14.5 70 31.5 18.4 85 44.7 22.5 – – –

50 17.4 13.4 60 22.5 15.7 75 31.5 20.0 90 44.7 24.2 – – –

60 17.4 15.7 70 22.5 18.4 80 31.5 21.2 – – – – – –

70 17.4 18.4 80 22.5 21.2 90 31.5 24.2 – – – – – –

SUE45

Fluid Cap100150

+Air Cap

200278-45°

40 27.9 11.6 50 36.0 13.4 65 50.6 17.0 80 72.0 21.2 – – –

45 27.9 12.5 55 36.0 14.5 70 50.6 18.4 85 72.0 22.5 – – –

50 27.9 13.4 60 36.0 15.7 75 50.6 20.0 90 72.0 24.2 – – –

55 27.9 14.5 65 36.0 17.0 80 50.6 21.2 – – – – – –

60 27.9 15.7 70 36.0 18.5 85 50.6 22.5 – – – – – –

65 27.9 17.0 75 36.0 20.0 90 50.6 24.2 – – – – – –

70 27.9 18.4 80 36.0 21.2 – – – – – – – – –



1 / 8 J A N D 1 / 4 J S E R I E S S I P H O N / G R AV I T Y- F E D S P R AY S E T- U P S

EXTERNAL MIX | FLAT SPRAY | ROUND SPRAY

AIR ATOMIZING

Spray Dimensionsat 8" Siphon Height

Air* A(in.)

B(in.)

C(in.)

D(ft.)

102030

88-1/2

9

10-1/211-1/2

12

151515

776

20

30

40

60

9

9-1/2

10-1/2

11

12-1/2

13-1/2

14-1/2

15-1/2

15

16-1/2

18

19

9

9

10

9

20

30

40

7-1/2

8

8-1/2

9

10

10-1/2

10-1/2

11

12

11

11

10

20

30

40

6-1/2

7

8

8-1/2

9

10-1/2

10-1/2

11-1/2

13

11

11

11


SpraySet-up

No.

SpraySet-up


Combination

AtomizingAir

Liquid Capacity(gallons per hour)*

AirPress.

AirCapacity

scfm

Gravity Head (in.) Siphon Height (in.)

18 12 6 4 8 12 24 36

SUF1Fluid Cap 2850

+Air Cap 73420

10.0 .99 .35 .33 .30 .27 .25 .22 .17 .13

20 1.42 .31 .30 .29 .26 .25 .23 .19 .16

30 1.83 .18 .16 .15 .11 .09 – – –

SUF2CFluid Cap 35100

+Air Cap 120432

20 1.86 1.01 .95 .90 .77 .72 .67 .62 .56

30 2.42 .88 .84 .81 .75 .71 .67 .63 .57

40 2.96 .76 .73 .69 .65 .61 .58 .53 .48

60 4.05 .44 .41 .37 .33 .30 .27 – –

SUF3BFluid Cap 40100

+Air Cap 122435

20 2.26 1.35 1.28 1.20 1.01 .96 .92 .78 .62

30 2.88 1.26 1.21 1.14 .92 .87 .82 .74 .59

40 3.52 .98 .92 .87 .66 .59 .52 .44 –

50 4.13 .58 .52 .44 – – – – –

SUF4BFluid Cap 40100

+Air Cap 122440

20 2.10 2.01 1.90 1.71 1.47 1.40 1.32 1.17 .92

30 2.70 2.00 1.94 1.81 1.58 1.52 1.45 1.34 1.11

40 3.28 1.82 1.74 1.63 1.42 1.34 1.22 1.03 –

50 3.87 1.10 .97 .85 .69 – – – –



• For round and flat sprays, angle “A” is maintained throughout distance “B”. Beyond “B”, the spray becomes turbulent and will project out to distance “D”

• When using a siphon or gravity-fed liquid system, the liquid is supplied by either a liquid siphon or a gravity-feed

• Designed to draw liquid through the feed line into the air flow where it is atomized

Round spraypattern A

BD

1158 retainer ring and 3612 gasket must be ordered separately from the spray set-up, but are included in the standard nozzle assembly. Please contact your sales engineer. Refer to page B4 for Siphon/Gravity-Fed Spray Set-ups diagram.

Air Caps Round spray and flat spray

air caps produce round spray and flat spray patterns


1 / 8 J A N D 1 / 4 J S E R I E S S I P H O N / G R AV I T Y- F E D S P R AY S E T- U P S

EXTERNAL MIX | ROUND SPRAY

AIR ATOMIZING


Air*SprayAngleA (°)

B(in.)

D(ft.)

10

20

40

60

18

18

18

18

11

11

12

14

6

6-1/2

7-1/2

8-1/2

10

20

40

60

18

18

18

19

12

13

15

17

7

7-1/2

8-1/2

10

10

20

40

60

18

18

19

20

12

13

15

17

8

9

11

13

10

20

40

60

21

21

21

22

15

16

18

20

10

11

13

15

20

40

60

80

17

18

18

19

18

20

21

23

12

14

16

18

30

40

60

80

20

20

21

22

20

21

23

25

22

23

25

27


SpraySet-up

No.

SpraySet-up


Combination

AtomizingAir


AirPress.

AirCapacity

scfm


18 12 6 4 8 12 24 36

SU1AFluid Cap 1650

+Air Cap 64

10.0 .40 .39 .35 .30 .23 .18 .14 – –

20 .59 .46 .43 .39 .34 .31 .28 .14 –

40 .95 .54 .50 .47 .41 .38 .36 .28 .19

60 1.32 .59 .54 .49 .44 .41 .39 .31 .24

SU1Fluid Cap 2050

+Air Cap 64

10.0 .47 .63 .55 .46 .40 .32 .21 – –

20 .66 .73 .66 .60 .54 .48 .40 .21 .07

40 1.06 .87 .81 .76 .71 .67 .61 .43 .28

60 1.48 .98 .92 .88 .83 .79 .73 .57 .40

SU2AFluid Cap 2050

+Air Cap 70

10.0 .81 .67 .61 .53 .43 .37 .29 – –

20 1.20 .76 .72 .64 .56 .50 .44 .21 –

40 1.94 .89 .86 .82 .76 .71 .65 .46 .30

60 2.70 .98 .96 .94 .91 .87 .81 .68 .56

SU2Fluid Cap 2850

+Air Cap 70

10.0 .68 1.19 1.05 .91 .56 .47 .38 – –

20 1.03 1.37 1.27 1.13 .88 .77 .68 .46 –

40 1.70 1.57 1.47 1.32 1.15 1.05 .91 .63 .28

60 2.39 1.48 1.41 1.30 1.08 1.02 .90 .74 .52

SU4Fluid Cap 60100

+Air Cap 120

20 1.90 5.80 5.15 4.20 3.10 2.65 1.90 .60 –

40 3.00 6.50 5.95 5.10 4.30 3.70 3.00 1.55 .70

60 4.10 6.80 6.35 5.60 4.90 4.20 3.45 2.20 1.30

80 5.20 6.80 6.40 5.80 5.20 4.50 3.85 2.60 1.60

SU5Fluid Cap 100150

+Air Cap 180

30 5.3 – – – 7.2 6.0 4.6 – –

40 6.5 – – – 7.8 6.8 5.3 – –

60 8.8 – 11.4 10.6 8.3 7.4 6.2 3.2 –

80 11.1 11.6 11.0 10.3 8.3 7.5 6.4 4.4 2.2



1 / 8 J J C O M PA C T S E R I E S

NOZZLE ASSEMBLIES

AIR ATOMIZING

Shut-off/clean-outneedle assembly

1/8JJ

1/8JJCO

1/8JJN

1/8JJAU – Drip Free

1 2 3

46

71 2 3

Spray set-up

Spray set-up

1. Retainer ring CP125822. Air cap3. Fluid cap4. O-ring 7717-2/007

Clean-outneedle assembly 14471


45

Spray Set-up for Drip Free

5. Nozzle body CP128916. Nozzle body CP144687. Back Seal Gasket 7222-BUC

OVERVIEW – 1/8JJ COMPACT SERIES


• Nozzle assembly consists of a body and spray set-up

• Various assemblies can be added to provide shut-off or clean-out functions

• 1/8JJ has liquid and air feeds at opposite ends of the body

• 1/8JJN features a manual shut-off needle that enables the flow of liquid to be stopped

• 1/8JJCO features a clean-out needle that is activated manually

– Needle slides through the liquid orifice to clear obstructions


1/8JJ 1/8" NPT or BSPT

1/8JJN 1/8" NPT or BSPT


1/8JJCO 1/8" NPT or BSPT



1 / 8 J J C O M PA C T S E R I E S

NOZZLE ASSEMBLIES

AIR ATOMIZING


Nozzle Type

JJ JJN JJCO

Nozzle Bodies

Electroless Nickel-plated Brass (none) l l l

303 Stainless Steel SS l l l

Spray Set-Ups

Electroless Nickel-plated Brass Air Cap and 303 Stainless SteelFluid Cap

SSBR l l l


MATERIALS

ORDERING INFO


ExampleInlet

Conn.

Nozzle Body

Assembly Type


Spray Set-up

No.

Material Code 1/8 JJN SS– –+ SUJ12A SS

*Includes retainer and gasket.

BSPT connections require the addition of a “B” prior to the nozzle body inlet connection. To order Spray Set-Up only, use Spray Set-Up number (shown in performance charts) and material code: SUJ12A - SS. Add DF to Set-Up number for Drip-Free Set-Ups: SUJA12ADF. To order fluid cap only, use fluid cap number (shown in performance data charts) and material code: J2050-SS. To order air cap only, use air cap number (shown in performance data charts) and material code: J73160-SS. To order spray nozzle without set-up, use inlet connection, nozzle body and material code: 1/8JJN-SS.



1 / 8 J J C O M PA C T S E R I E S P R E S S U R E S P R AY S E T- U P S

INTERNAL MIX | ROUND SPRAY | 360˚ CIRCULAR SPRAY

AIR ATOMIZING

SprayDimensions


B(in.)

D(ft.)

12

24

36

44

62

10

20

30

40

60

13

13

13

14

15

12

13

14

15-1/2

17-1/2

9

10

11

12-1/2

14-1/2

12

20

34

42

58

10

20

30

40

60

12

13

13

13

15

17

18

19

20

22

12

13

14

15

17


SpraySet-up

No.

SpraySet-up


Combination


Liquid Pressure

10 20 30 40 60




SUJ11

Fluid CapJ2050

+Air CapJ67147

10.0 .66 .55 14 1.50 .40 24 1.68 .56 32 1.86 .68 50 2.28 .98

12.0 .48 .67 18 1.23 .50 28 1.44 .63 36 1.62 .80 54 2.05 1.07

14.0 .36 .78 22 .99 .63 32 1.08 .82 40 1.32 .93 58 1.80 1.19

– – – 26 .72 .76 38 .72 1.03 48 .85 1.23 66 1.32 1.52

– – – 30 .45 .93 42 .54 1.19 52 .66 1.38 70 1.11 1.66

SUJ12A

Fluid CapJ2050

+Air CapJ73160

10.0 .66 .66 18 1.44 .87 24 1.98 1.00 30 2.40 1.14 40 3.30 1.36

12.0 .54 .77 20 1.32 .98 28 1.68 1.17 34 2.16 1.29 46 2.94 1.54

14.0 .42 .90 22 1.20 1.06 32 1.44 1.35 38 1.92 1.47 52 2.58 1.83

– – – 26 .90 1.26 36 1.20 1.57 44 1.50 1.78 62 2.10 2.26

– – – – – – 40 1.02 1.76 48 1.32 1.98 70 1.68 2.67






12582 retainer ring and 7717-2/007 O-ring must be ordered separately from the spray set-up, but are included in the standard nozzle assembly. Please contact your sales engineer.

Round spraypattern

A

BD

Air Caps Round spray and 360° circular spray

air caps produce full cone round spray; air caps used in spray set-up

SUJ340C produce 360° circular spray pattern



INTERNAL MIX | ROUND SPRAY | 360˚ CIRCULAR SPRAY

AIR ATOMIZING

SprayDimensions


B(in.)

D(ft.)

22

34

42

48

60

10

20

30

40

60

12

13

13

14

15

19

20

21

22

23-1/2

13

14

15

16

17-1/2

24

40

55

75

85

10

20

30

40

60

18

20

20

21

21

26

30

32

36

38

16

20

22

26

30

14

26

40

50

70

10

20

30

40

60

17

18

20

20

21

24

27

30

31

36

16

19

22

23

28


SpraySet-up

No.

SpraySet-up


Combination


Liquid Pressure

10 20 30 40 60




SUJ12

Fluid CapJ2850

+Air CapJ73160

12.0 1.26 .73 22 2.16 1.05 30 2.90 1.24 36 4.32 1.26 48 5.82 1.50

16.0 1.08 .94 26 1.74 1.26 34 2.46 1.42 40 3.85 1.36 52 5.28 1.65

20 .90 1.15 30 1.44 1.47 38 2.10 1.65 44 3.55 1.56 56 4.92 1.73

24 .78 1.36 38 1.08 1.87 46 1.50 2.03 52 2.46 2.01 64 4.08 2.08

28 .76 1.56 42 .94 2.04 52 1.20 2.36 60 1.86 2.36 70 3.60 2.34

SUJ22B

Fluid CapJ40100

+Air Cap

J1401110

16.0 3.44 2.68 28 5.03 3.71 40 6.10 4.72 48 7.75 5.30 65 10.70 6.74

20 2.35 3.20 32 3.70 4.17 44 5.03 5.17 55 5.95 6.07 75 8.67 7.73

22 1.90 3.46 36 2.64 4.65 48 3.95 5.65 65 3.55 7.28 80 7.65 8.25

26 1.23 3.97 44 1.30 5.63 60 1.56 7.12 80 1.40 9.10 90 5.64 9.40

30 .72 4.48 50 .76 6.36 70 .73 8.35 90 .72 10.34 100 3.62 10.60

SUJ22

Fluid CapJ60100

+Air Cap

J1401110

12.0 8.1 2.00 20 13.6 2.55 30 16.3 3.25 38 19.5 3.74 54 25.7 4.66

14.0 6.6 2.32 22 12.0 2.85 34 13.1 3.75 42 16.5 4.20 60 21.8 5.34

16.0 4.9 2.66 24 10.2 3.15 38 9.9 4.32 46 13.6 4.71 65 18.5 5.98

– – – 28 7.2 3.75 42 7.6 4.90 52 9.6 5.58 75 12.2 7.80

– – – 32 4.6 4.35 46 5.6 5.50 56 7.6 6.14 85 8.0 8.90

†Use only with 1/8JJAU automatic air atomizing nozzles.


SpraySet-up

No.

SpraySet-up


Combination


Liquid Pressure

10 20 30 40 60




SUJ340C

Fluid CapJ60100

+Air Cap

J150-6-62-160HC

20 4.0 2.45 34 6.6 4.09 50 7.1 6.38 60 11.0 7.6 85 14.4 11.8

22 2.8 2.7 38 4.4 4.8 52 6.2 6.75 65 8.3 8.63 90 12.0 13.0

24 2.0 2.97 42 2.8 5.5 56 4.4 7.55 70 6.1 9.78 95 9.8 14.1

26 1.5 3.3 46 1.7 6.34 60 3.2 8.41 80 3.1 12.44 100 7.8 15.4

28 1.1 3.62 48 1.3 6.85 70 1.3 11.75 90 1.4 15.4 – – –

360° circular spray pattern


360° CIRCULAR SPRAY† *At the stated pressure in psi.


AIR ATOMIZING


INTERNAL MIX | WIDE ANGLE ROUND SPRAY | FLAT SPRAY

SprayDimensions

Air* Liquid* A(in.)

B(in.)

C(in.)

D(ft.)

1020344260

1020304060

5-1/26

6-1/26-1/27-1/2

77-1/2

889

99-1/2

1010-1/2

12

567913

1224344660

1020304060

77-1/27-1/2

88-1/2

9-1/21010

10-1/211

12-1/21313

13-1/214-1/2

68

10-1/213-1/219-1/2

1222344665

1020304060

7-1/28888

1010-1/210-1/2

1111

1414-1/214-1/2

1515-1/2

710-1/213-1/216-1/222-1/2

2842658590

1020304060

88

8-1/29

9-1/2

1010-1/2

1111-1/212-1/2

1313-1/214-1/2

1516

1821273034

2240507090

1020304060

66-1/26-1/2

77-1/2

7-1/288

8-1/29-1/2

99-1/29-1/2

1011

915182431


SpraySet-up

No.

SpraySet-up


Combination


Liquid Pressure

10 20 30 40 60




SUJ16

Fluid CapJ2050

+Air Cap

J67-6-20-70°

8.0 1.41 .36 14.0 2.10 .42 22 2.36 .56 30 2.53 .68 44 2.95 .8110.0 1.14 .43 16.0 1.90 .50 26 2.02 .69 34 2.23 .81 48 2.72 .9412.0 .79 .50 18.0 1.68 .56 30 1.61 .83 38 1.90 .94 55 2.30 1.2014.0 .45 .60 22 1.17 .71 36 .91 1.07 46 1.10 1.26 65 1.50 1.60

– – – 26 .55 .90 40 .43 1.25 50 .69 1.45 75 .65 2.05

SUJ26B

Fluid CapJ40100

+Air Cap

J140-6-37-70°

12.0 1.85 1.78 22 3.30 2.30 30 5.10 2.54 38 6.40 2.84 54 8.76 3.4414.0 .55 2.20 24 2.20 2.67 32 4.25 2.85 42 4.70 3.42 56 8.10 3.74

– – – 26 1.20 3.05 36 2.50 3.50 46 3.06 4.05 60 6.76 4.32– – – – – – 40 .70 4.30 50 1.40 4.84 70 3.50 6.00– – – – – – – – – 52 .60 5.34 75 1.85 6.95

SUJ26

Fluid CapJ60100

+Air Cap

J140-6-37-70°

10.0 6.3 1.14 20 9.0 1.60 30 11.2 2.04 40 12.4 2.54 56 16.2 2.7512.0 3.6 1.54 22 6.9 2.00 32 9.3 2.44 42 10.6 2.92 58 14.8 3.1114.0 2.0 2.00 24 5.1 2.40 36 5.4 3.20 46 7.1 3.72 65 9.8 4.42

– – – 26 3.3 2.80 40 2.3 3.98 50 3.6 4.51 75 4.0 6.31– – – – – – – – – 52 2.2 4.91 80 2.4 6.51

SUJ29

Fluid CapJ60100

+Air Cap

J140-6-52-70°

18.0 9.4 3.0 30 13.4 4.15 44 15.3 5.45 60 15.6 7.05 80 21.4 8.5522 7.7 3.6 34 11.9 4.65 48 13.8 5.9 70 12.5 8.25 85 19.5 9.1526 6.0 4.13 38 10.3 5.1 55 11.3 6.75 80 9.3 9.45 90 17.9 9.7530 4.4 4.7 46 7.3 6.1 70 6.1 8.6 90 6.2 10.7 100 15.1 10.9534 3.0 5.25 60 2.4 7.95 80 3.3 9.85 100 3.7 11.9 – – –

SUJ30

Fluid CapJ40100

+Air Cap

J120-6-35-60°

16.0 3.24 1.43 28 4.60 1.96 42 5.27 2.67 55 5.69 3.30 80 7.10 4.5018.0 2.61 1.59 32 3.37 2.27 46 4.0 2.96 60 4.24 3.68 85 5.80 4.8820 2.08 1.75 36 2.45 2.55 48 3.45 3.11 65 3.15 4.06 90 4.65 5.2724 1.30 2.06 42 1.45 3.00 55 2.11 3.63 75 1.72 4.82 100 3.00 6.0328 .82 2.35 46 1.0 3.28 65 1.03 4.36 85 1.05 5.58 – – –



• For wide angle round and flat sprays, dimensions “A”, “B” and “C” are the pattern widths at distances from the nozzle





AB

C

15" (38 cm)

6" (15 cm)

9" (23 cm)

D

Wide angle roundspray pattern

Air Caps Wide angle round and flat spray

air caps produce hollow cone type, wide angle round spray and flat

spray patterns


AIR ATOMIZING


INTERNAL MIX | FLAT SPRAY

SprayDimensions

Air* Liquid* A(in.)

B(in.)

C(in.)

D(ft.)

16

30

40

50

85

10

20

30

40

60

10

14

15

18-1/2

22

14

19

21

24

29

18

26

30

34

37

8-1/2

10

10-1/2

11

13

16

30

42

50

80

10

20

30

40

60

14

17

20

23

23

18

24

26

30

30

28

32

35

38

38

7

8

8-1/2

9

10-1/2

22

38

46

60

80

10

20

30

40

60

10

14

23

24

25

13

20

29

29

30

18

27

36

37

38

6

6-1/2

6-1/2

7

7-1/2

20

32

42

54

75

10

20

30

40

60

6

9

10

12

13

7

11

13

15

16

8

13

18

18

19

10

10-1/2

11

11-1/2

13

16

32

46

56

85

10

20

30

40

60

7

9

10

12

13

9

12

13

15

16

12

16

17

19

20

11

11-1/2

12

12-1/2

14-1/2


SpraySet-up

No.

SpraySet-up


Combination


Liquid Pressure

10 20 30 40 60




SUJ13A

Fluid CapJ2050

+Air CapJ73328

10.0 1.44 .84 18.0 2.17 1.12 28 2.49 1.47 38 2.77 1.84 55 3.41 2.43

12.0 1.25 .96 22 1.82 1.31 32 2.19 1.64 42 2.49 2.01 65 2.83 2.85

14.0 1.09 1.08 26 1.50 1.50 36 1.89 1.82 46 2.20 2.19 75 2.26 3.26

18.0 .79 1.32 34 .93 1.87 44 1.30 2.18 60 1.25 2.81 90 1.40 3.88

22 .53 1.55 40 .57 2.16 55 .65 2.68 70 .65 3.25 100 .88 4.29

SUJ13

Fluid CapJ2850

+Air CapJ73328

12.0 2.17 .70 20 3.35 .96 30 3.98 1.27 38 4.66 1.49 65 4.8 2.38

14.0 1.80 .82 24 2.71 1.14 34 3.41 1.45 42 4.14 1.65 70 4.21 2.62

16.0 1.45 .95 28 2.06 1.34 38 2.85 1.64 46 3.6 1.85 75 3.63 2.86

20 .77 1.2 32 1.44 1.56 46 1.72 2.07 60 1.76 2.58 85 2.48 3.35

– – – 36 .94 1.78 50 1.2 2.28 70 .76 3.09 95 1.57 3.85

SUJ14

Fluid CapJ2850

+Air CapJ73320

18.0 1.04 1.05 30 1.56 1.43 42 2.06 1.75 55 2.16 2.15 75 3.20 2.66

20 .80 1.15 34 1.10 1.61 44 1.80 1.85 60 1.60 2.38 80 2.66 2.90

22 .62 1.25 36 .90 1.70 46 1.57 1.94 65 1.15 2.62 85 2.19 3.13

26 .35 1.45 40 .60 1.88 50 1.13 2.13 – – – – – –

– – – 44 .35 2.07 – – – – – – – – –

SUJ23B

Fluid CapJ40100

+Air CapJ125328

16.0 2.95 1.92 28 4.45 2.66 38 5.94 3.22 46 7.50 3.66 65 9.70 4.80

18.0 2.25 2.10 30 3.87 2.84 40 5.40 3.40 50 6.45 3.97 70 8.60 5.20

20 1.72 2.30 32 3.30 3.04 42 4.86 3.55 52 5.90 4.15 75 7.50 5.60

24 1.00 2.70 36 2.28 3.40 46 3.78 3.93 56 4.87 4.50 85 5.30 6.48

– – – – – – – – – 60 3.84 4.90 – – –

SUJ23

Fluid CapJ60100

+Air CapJ125328

12.0 7.0 1.15 22 11.5 1.65 34 12.4 2.20 46 13.7 2.75 65 18.3 3.56

14.0 5.4 1.35 26 8.3 2.02 38 9.8 2.57 50 10.9 3.14 75 12.6 4.47

16.0 4.2 1.57 30 6.0 2.40 42 7.8 2.95 54 8.7 3.51 80 10.6 4.95

20 2.7 1.97 34 4.3 2.78 48 5.0 3.52 60 6.4 4.06 90 6.9 5.85

– – – 38 3.0 3.16 52 3.7 3.90 70 3.3 5.00 100 4.5 6.76




EXTERNAL MIX | HIGH CAPACITY | FLAT SPRAY

AIR ATOMIZING


SpraySet-up

No.

SpraySet-up


Combination


Spray AngleLiquid Pressure

10 20 30 40



Press. gph scfm

SUJE416-50

Fluid CapPFJ1650

+Air Cap

PAJ105-50

10.0 1.3 2.3 10.0 1.8 2.3 10.0 2.2 2.3 10.0 2.6 2.3

50°

20 1.3 3.7 20 1.8 3.7 20 2.2 3.7 20 2.6 3.730 1.3 5.0 30 1.8 5.0 30 2.2 5.0 30 2.6 5.040 1.3 6.2 40 1.8 6.2 40 2.2 6.2 40 2.6 6.250 1.3 7.4 50 1.8 7.4 50 2.2 7.4 50 2.6 7.4

SUJE417-50

Fluid CapPFJ2050

+Air Cap

PAJ105-50

10.0 1.9 2.3 10.0 2.6 2.3 10.0 3.2 2.3 10.0 – –20 1.9 3.7 20 2.6 3.7 20 3.2 3.7 20 – –30 1.9 5.0 30 2.6 5.0 30 3.2 5.0 30 4.0 5.040 1.9 6.2 40 2.6 6.2 40 3.2 6.2 40 4.0 6.250 1.9 7.4 50 2.6 7.4 50 3.2 7.4 50 4.0 7.4

SUJE418-50

Fluid CapPFJ2850

+Air Cap

PAJ105-50

10.0 2.9 2.3 10.0 5.8 2.3 10.0 7.9 2.3 10.0 8.3 2.320 2.9 3.7 20 5.8 3.7 20 7.9 3.7 20 8.3 3.730 2.9 5.0 30 5.8 5.0 30 7.9 5.0 30 8.3 5.040 2.9 6.2 40 5.8 6.2 40 7.9 6.2 40 8.3 6.250 2.9 7.4 50 5.8 7.4 50 7.9 7.4 50 8.3 7.4

SUJE420-50

Fluid CapPFJ40100

+Air Cap

PAJ135-50

10.0 8.0 2.3 10.0 11.7 2.3 10.0 14.4 2.3 10.0 16.7 2.320 8.0 3.7 20 11.7 3.7 20 14.4 3.7 20 16.7 3.730 8.0 5.0 30 11.7 5.0 30 14.4 5.0 30 16.7 5.040 8.0 6.1 40 11.7 6.1 40 14.4 6.1 40 16.7 6.150 8.0 7.3 50 11.7 7.3 50 14.4 7.3 50 16.7 7.3



• Offers an increased ability to atomize viscous fluids and allows for greater capacities of finely atomized sprays

• Simple, one-piece, low-profile design permits larger air passage. More air can be brought in to atomize the liquid stream

• Atomization can be controlled by varying the air pressure without changing liquid flow rates


• The liquid and compressed air or gas are mixed externally to produce a completely atomized spray

• SUJE Spray Set-up Series is both compact and air efficient

• Offered in three spray angles – 50°, 65° and 90°

• SUJE Series features lower spray velocity for improved transfer and reduced misting and is ideal for applications where space is limited

• Very efficient use of air results in reduced air consumption costs and noise levels

• Simple four-part assembly allows easy installation and maintenance

CP46259 retainer ring and CP7717-2/007-VI O-ring must be ordered separately from the spray set-up, but are included in the standard nozzle assembly. The 46599 adapter is used with all 1/8JJ nozzle bodies and automatic spray guns with extensions, but not on 1/8JJAU spray guns without extensions. Please contact your sales engineer.

ABC

15" (38 cm)

6" (15 cm)

9" (23 cm)

D

Flat spraypattern

Air Caps External mix air caps produce

a flat spray pattern



EXTERNAL MIX | HIGH CAPACITY | FLAT SPRAY

AIR ATOMIZING


SpraySet-up

No.

SpraySet-up


Combination


Spray Angle

Liquid Pressure

10 20 30 40



Press. gph scfm

SUJE416-65

Fluid CapPFJ1650

+Air Cap

PAJ080-65

10.0 1.3 1.9 10.0 1.8 1.9 10.0 2.2 1.9 10.0 2.6 1.9

65°

20 1.3 3.0 20 1.8 3.0 20 2.2 3.0 20 2.6 3.030 1.3 4.0 30 1.8 4.0 30 2.2 4.0 30 2.6 4.040 1.3 5.0 40 1.8 5.0 40 2.2 5.0 40 2.6 5.050 1.3 5.9 50 1.8 5.9 50 2.2 5.9 50 2.6 5.9

SUJE417-65

Fluid CapPFJ2050

+Air Cap

PAJ080-65

10.0 1.9 1.9 10.0 2.6 1.9 10.0 3.2 1.9 10.0 4.0 1.920 1.9 3.0 20 2.6 3.0 20 3.2 3.0 20 4.0 3.030 1.9 4.0 30 2.6 4.0 30 3.2 4.0 30 4.0 4.040 1.9 5.0 40 2.6 5.0 40 3.2 5.0 40 4.0 5.050 1.9 5.9 50 2.6 5.9 50 3.2 5.9 50 4.0 5.9

SUJE418-65

Fluid CapPFJ2850

+Air Cap

PAJ080-65

10.0 2.9 1.9 10.0 5.8 1.9 10.0 – – 10.0 – –20 2.9 3.0 20 5.8 3.0 20 7.9 3.0 20 – –30 2.9 4.0 30 5.8 4.0 30 7.9 4.0 30 8.3 4.040 2.9 5.0 40 5.8 5.0 40 7.9 5.0 40 8.3 5.050 2.9 5.9 50 5.8 5.9 50 7.9 5.9 50 8.3 5.9

SUJE420-65

Fluid CapPFJ40100

+Air Cap

PAJ125-65

10.0 8.0 2.1 10.0 11.7 2.1 10.0 14.4 2.1 10.0 16.7 2.120 8.0 3.3 20 11.7 3.3 20 14.4 3.3 20 16.7 3.330 8.0 4.4 30 11.7 4.4 30 14.4 4.4 30 16.7 4.440 8.0 5.4 40 11.7 5.4 40 14.4 5.4 40 16.7 5.450 8.0 6.5 50 11.7 6.5 50 14.4 6.5 50 16.7 6.5

SUJE421-65

Fluid CapPFJ60100

+Air Cap

PAJ125-65

30 16.0 4.4 30 – – 30 – – 30 – –

40 16.0 5.4 40 23.2 5.4 40 – – 40 – –

50 16.0 6.5 50 23.2 6.5 50 28.7 6.5 50 – –

SUJE416-90

Fluid CapPFJ1650

+Air Cap

PAJ075-90

10.0 1.3 1.9 10.0 1.8 1.9 10.0 2.2 1.9 10.0 2.6 1.9

90°

20 1.3 3.0 20 1.8 3.0 20 2.2 3.0 20 2.6 3.030 1.3 4.0 30 1.8 4.0 30 2.2 4.0 30 2.6 4.040 1.3 5.0 40 1.8 5.0 40 2.2 5.0 40 2.6 5.050 1.3 5.9 50 1.8 5.9 50 2.2 5.9 50 2.6 5.9

SUJE417-90

Fluid CapPFJ2050

+Air Cap

PAJ075-90

10.0 1.9 1.9 10.0 2.6 1.9 10.0 3.2 1.9 10.0 4.0 1.920 1.9 3.0 20 2.6 3.0 20 3.2 3.0 20 4.0 3.030 1.9 4.0 30 2.6 4.0 30 3.2 4.0 30 4.0 4.040 1.9 5.0 40 2.6 5.0 40 3.2 5.0 40 4.0 5.050 1.9 5.9 50 2.6 5.9 50 3.2 5.9 50 4.0 5.9

SUJE418-90

Fluid CapPFJ2850

+Air Cap

PAJ075-90

10.0 2.9 1.9 10.0 – – 10.0 – – 10.0 – –20 2.9 3.0 20 5.8 3.0 20 7.9 3.0 20 – –30 2.9 4.0 30 5.8 4.0 30 7.9 4.0 30 8.3 4.040 2.9 5.0 40 5.8 5.0 40 7.9 5.0 40 8.3 5.050 2.9 5.9 50 5.8 5.9 50 7.9 5.9 50 8.3 5.9

SUJE420-90

Fluid CapPFJ40100

+Air Cap

PAJ115-90

20 8.0 2.9 20 – – 20 – – 20 – –

30 8.0 3.9 30 11.7 3.9 30 – – 30 – –

40 8.0 4.8 40 11.7 4.8 40 14.4 4.8 40 – –

50 8.0 5.7 50 11.7 5.7 50 14.4 5.7 50 16.7 5.7

SUJE421-90

Fluid CapPFJ60100

+Air Cap

PAJ115-90

30 16.0 3.9 30 – – 30 – – 30 – –40 16.0 4.8 40 23.2 4.8 40 – – 40 – –50 16.0 5.7 50 23.2 5.7 50 28.7 5.7 50 – –60 – – 60 – – 60 – – 60 33.2 6.670 – – 70 – – 70 – – 70 33.2 7.5



AIR ATOMIZING

1 / 8 J J C O M PA C T S E R I E S S I P H O N / G R AV I T Y- F E D S P R AY S E T- U P S

EXTERNAL MIX | ROUND SPRAY


SpraySet-up

No.

SpraySet-up


Combination

AtomizingAir


AirPress.

AirCapacity

scfm


18 12 6 4 8 12 24 36

SUJ1AFluid Cap J1650

+Air Cap J64

10.0 .40 .39 .35 .30 .23 .18 .14 – –

20 .59 .46 .43 .39 .34 .31 .28 .14 –

40 .95 .54 .50 .47 .41 .38 .36 .28 .19

60 1.32 .59 .54 .49 .44 .41 .39 .31 .24

SUJ1Fluid Cap J2050

+Air Cap J64

10.0 .47 .63 .55 .46 .40 .32 .21 – –

20 .66 .73 .66 .60 .54 .48 .40 .21 .07

40 1.06 .87 .81 .76 .71 .67 .61 .43 .28

60 1.48 .98 .92 .88 .83 .79 .73 .57 .40

SUJ2AFluid Cap J2050

+Air Cap J70

10.0 .81 .67 .61 .53 .43 .37 .29 – –

20 1.20 .76 .72 .64 .56 .50 .44 .21 –

40 1.94 .89 .86 .82 .76 .71 .65 .46 .30

60 2.70 .98 .96 .94 .91 .87 .81 .68 .56

SUJ2Fluid Cap J2850

+Air Cap J70

10.0 .68 1.19 1.05 .91 .56 .47 .38 – –

20 1.03 1.37 1.27 1.13 .88 .77 .68 .46 –

40 1.70 1.48 1.41 1.30 1.08 1.02 .90 .63 .28

60 2.39 1.57 1.47 1.32 1.15 1.05 .91 .74 .52

SUJ3Fluid Cap J2850

+Air Cap J64-5

10.0 .41 – – – .59 .49 .29 – –

20 .61 – 1.22 1.05 .89 .78 .63 .26 –

40 .99 1.68 1.56 1.45 1.34 1.22 1.10 .70 .30

60 1.36 1.91 1.81 1.72 1.64 1.54 1.44 1.02 .56

SUJ4BFluid Cap J40100

+Air Cap J120

10.0 1.30 – – – 1.40 .97 .59 – –

20 1.97 – 2.57 2.37 1.90 1.50 1.20 .34 –

40 3.12 3.20 2.96 2.80 2.30 2.02 1.70 .76 .26

60 4.28 3.47 3.24 3.05 2.57 2.32 2.05 1.16 .52

SUJ4Fluid Cap J60100

+Air Cap J120

20 1.90 5.80 5.15 4.20 3.10 2.65 1.90 .60 –

40 3.00 6.50 5.95 5.10 4.30 3.70 3.00 1.55 .70

60 4.10 6.80 6.35 5.60 4.90 4.20 3.45 2.20 1.30

80 5.20 6.80 6.40 5.80 5.20 4.50 3.85 2.60 1.60


Air*SprayAngleA (°)

B(in.)

D(ft.)

10204060

18181818

11111214

66-1/27-1/28-1/2

10204060

18181819

12131517

77-1/28-1/2

10

10204060

18181920

12131517

891113

10204060

21212122

15161820

10111315

10204060

18181819

12131517

891113

10204060

17171819

18192123

10111315

20406080

17181819

18202123

12141618




• When using a siphon or gravity-fed liquid system, the liquid is supplied by either a liquid siphon or a gravity-feed

• Designed to draw liquid through the feed line into the air flow where it is atomized


A

D

Round spraypattern

B

Air Caps Round spray air caps produce a full

cone round spray pattern


AIR ATOMIZING

1 / 8 J J C O M PA C T S E R I E S S I P H O N / G R AV I T Y- F E D S P R AY S E T- U P S



Air* A(in.)

B(in.)

C(in.)

D(ft.)

10

20

30

8

8-1/2

9

10-1/2

11-1/2

12

15

15

15

7

7

6

20304060

99-1/210-1/2

11

12-1/213-1/214-1/215-1/2

1516-1/2

1819

99109

20

30

40

7-1/2

8

8-1/2

9

10

10-1/2

10-1/2

11

12

11

11

10

20

30

40

6-1/2

7

8

8-1/2

9

10-1/2

10-1/2

11-1/2

13

11

11

11


SpraySet-up

No.

SpraySet-up


Combination

AtomizingAir


AirPress.

AirCapacity

scfm


18 12 6 4 8 12 24 36

SUJF1Fluid Cap J2850

+Air Cap J73420

10.0 .99 .35 .33 .30 .27 .25 .22 .17 .13

20 1.42 .31 .30 .29 .26 .25 .23 .19 .16

30 1.83 .18 .16 .15 .11 .09 – – –

SUJF2CFluid Cap J35100

+Air Cap J120432

20 1.86 1.01 .95 .90 .77 .72 .67 .62 .56

30 2.42 .88 .84 .81 .75 .71 .67 .63 .57

40 2.96 .76 .73 .69 .65 .61 .58 .53 .48

60 4.05 .44 .41 .37 .33 .30 .27 – –

SUJF3BFluid Cap J40100

+Air Cap J122435

20 2.26 1.35 1.28 1.20 1.01 .96 .92 .78 .62

30 2.88 1.26 1.21 1.14 .92 .87 .82 .74 .59

40 3.52 .98 .92 .87 .66 .59 .52 .44 –

50 4.13 .58 .52 .44 – – – – –

SUJF4BFluid Cap J40100

+Air Cap J122440

20 2.10 2.01 1.90 1.71 1.47 1.40 1.32 1.17 .92

30 2.70 2.00 1.94 1.81 1.58 1.52 1.45 1.34 1.11

40 3.28 1.82 1.74 1.63 1.42 1.34 1.22 1.03 –

50 3.87 1.10 .97 .85 .69 – – – –



• For flat spray pattern, dimensions “A”, “B” and “C” are the pattern widths at distances from the nozzle

• Total distance of spray projection from the nozzle to the maximum dispersal point is represented by “D”

ABC

15" (38 cm)

6" (15 cm)

9" (23 cm)

D

Flat spraypattern

Air Caps Flat spray air caps produce



AIR ATOMIZING

VA U A N D V M A U S E R I E S

NOZZLE ASSEMBLIES


• The VAA, VAU and VMAU variable spray nozzles provide uniform spray distribution, even when spraying viscous liquids

• Independent control of liquid, atomizing air and fan air pressures is possible for fine-tuning of flow rate, drop size, spray distribution and coverage

• Can be set and re-set in seconds, simplifying application changes

• Independent air atomizing line can be adjusted to vary spray drop size without affecting liquid flow rates

• Additional inlet/outlet port allows for liquid recirculation that effectively maintains the flow of viscous liquids

• VAA offers continuous operation and consists of a body, spray set-up and plug

• VAAN features a manual shut-off needle that enables the flow of the liquid to be stopped

• VAACO features a clean-out needle that clears the liquid orifice of obstructions when activated manually

Shut-off/clean-out needle assembly 29534

1/8VAA

1/8VAAN

1/8VAACO

1/8VAANCO

1/8VAU

Spray set-up

1 2 3 4 5

1. Cap ring 28207-101-SS2. Air cap3. Fluid cap4. Nozzle body 29074-001-SS5. Washer 29154-001-BUC

Plug 29155-001-SS

Shut-off needle assembly 29535-001-SS

Clean-out needle assembly 29156

OVERVIEW – VARIABLE SPRAY SERIES

VAA 1/8" NPT or BSPT

VAU 1/8" NPT or BSPT

VMAU 1/4" NPT or BSPT

with shut-off/clean-out needle

VAAN 1/8" NPT or BSPT


VAACO 1/8" NPT or BSPT with clean-out needle


VA U A N D V M A U S E R I E S

NOZZLE ASSEMBLIES

AIR ATOMIZING

VAANCO 1/8" NPT or BSPT with

shut-off/clean-out needle

VAUPM 1/8" NPT or BSPT

Mounting Kits Clamp mounting kits and Rod mounting kits

MATERIALS


Nozzle Type

VMAU VAA VAAN VAACO VAANCO VAU VAUPM

Nozzles

303 Stainless Steel SS l l l l l l

303 Stainless Steel/Aluminum SSA l

316 Stainless Steel l

Air/Fluid Caps

303 Stainless Steel SS l l l l l l

Other materials available upon request.


• VAANCO combines the features of the VAAN and VAACO, offering a combination shut-off/clean-out needle

• VAU offers automatic operation with a built-in shut-off/clean-out needle

• VAUPM has the same operating features as the VAU, but offers the convenience of a mounting plate

• VMAU allows for individual adjustment of the atomizing air, fan air and liquid flows and offers modular components to accommodate a wide range of spray applications

• Mounting Kit 28945-001-316SS uses clamps to mount VAA nozzles

• Mounting Kit 28945-002-SS uses rods to mount VAA nozzles

ORDERING INFO


ExampleInlet

Conn.

Nozzle Body

Assembly Type


Spray Set-up

No.

Material Code 1/8 VAA SS– –+ SUV128 SS


BSPT connections require the addition of a “B” prior to the nozzle body inlet connection. To order Spray Set-Up only, use Spray Set-Up number (shown in performance charts) and material code: SUV128-SS. To order fluid cap only, use fluid cap number (shown in performance data charts) and material code: VF1650-SS. To order air cap only, use air cap number (shown in performance data charts) and material code: VA67255-60-SS. To order spray nozzle without set-up, use inlet connection, nozzle body, and material code: 1/8VAA-SS. Order mounting kits separately: 28945-001-316SS.



V M A U S E R I E S P R E S S U R E S P R AY S E T- U P S

EXTERNAL MIX

AIR ATOMIZING


SpraySet-up

No.

SpraySet-up


Combination

Air Capacity* Liquid Capacity*

Atom.Air

Press.

WaterPress.

Spray Coverage (in.) at Indicated Distance from NozzleFan Air Pressure

Press.

Capacity

Press. Cap.gph

0 5 10 20 30 40

AtomizingAir

scfm

FanAir

scfmA B C A B C A B C A B C A B C A B C

SUVM67B

Fluid CapVMF1650

+Air Cap

VMA67255-60

10.0

15.0

20

30

40

50

60

70

80

90

.58

.73

.84

1.1

1.3

1.6

1.8

2.0

2.3

2.5

2.0

2.6

3.1

3.9

4.6

5.8

6.6

7.5

8.3

9.0

1.0

3.0

5.0

10.0

15.0

20

.44

.74

1.0

1.4

1.7

1.9

10.0

3.0 2.0 3.0 4.0 5.0 6.0 7.0 7.0 9.0 10.0 7.0 9.0 11.0 3.5 4.0 6.0 – – –

10.0 2.5 3.5 4.5 6.0 8.0 7.0 7.0 9.0 11.0 8.0 10.0 12.0 3.5 4.0 5.5 – – –

20 – – – 6.0 9.0 8.0 8.0 12.0 13.0 10.0 12.0 14.0 3.5 5.5 7.0 – – –

20

3.0 2.0 3.0 4.5 4.0 5.0 6.0 6.0 7.0 8.0 7.0 9.0 11.0 5.0 6.5 7.0 7.0 8.0 10.0

10.0 2.0 3.0 4.0 5.0 7.0 7.0 7.0 9.0 10.0 8.0 10.0 12.0 4.5 5.0 6.0 7.0 8.0 10.0

20 2.0 3.0 4.0 6.0 7.0 8.0 8.0 10.0 12.0 9.0 12.0 14.0 6.0 7.5 9.0 7.0 8.0 10.0

30

3.0 2.0 3.0 4.5 3.0 4.0 5.0 5.0 6.0 7.0 6.0 8.0 10.0 5.5 6.0 7.0 7.0 9.0 11.0

10.0 2.0 3.0 4.5 4.0 4.5 6.0 6.0 7.5 10.0 7.0 9.0 11.0 5.5 6.5 8.0 7.0 9.0 12.0

20 2.0 3.0 4.0 4.5 6.0 7.0 7.0 9.0 12.0 8.0 10.0 12.0 6.0 7.0 9.0 8.0 9.0 11.0

40

3.0 2.5 3.5 6.0 3.5 4.5 5.0 5.0 6.0 8.0 6.0 8.0 10.0 5.0 6.5 8.0 7.0 9.0 11.0

10.0 2.0 3.0 5.0 4.0 5.0 5.0 5.0 7.0 9.0 7.0 9.0 11.0 6.0 7.5 9.0 7.0 9.0 11.0

20 2.0 3.0 4.5 4.0 5.5 6.0 6.0 8.0 10.0 8.0 9.0 11.0 6.0 7.5 10.0 8.0 10.0 12.0

60

3.0 2.5 3.5 6.0 3.0 4.5 4.0 4.0 5.0 6.0 5.0 7.0 9.0 5.0 6.5 10.0 7.0 9.0 11.0

10.0 2.5 3.0 5.0 3.5 4.0 4.5 4.5 5.0 7.0 7.0 9.0 11.0 6.0 7.5 11.0 8.0 10.0 12.0

20 2.0 3.0 4.5 3.5 5.0 5.0 5.0 7.0 9.0 7.0 9.0 11.0 6.0 7.5 11.5 8.0 10.0 12.0

SUVM67A

Fluid CapVMF2050

+Air Cap

VMA67255-60

10.0

15.0

20

30

40

50

60

70

80

90

.58

.73

.84

1.1

1.3

1.6

1.8

2.0

2.3

2.5

2.0

2.6

3.1

3.9

4.6

5.8

6.6

7.5

8.3

9.0

1.0

3.0

5.0

10.0

15.0

20

.65

1.1

1.5

2.1

2.5

2.9

10.0

3.0 2.0 3.0 4.0 5.0 6.0 8.0 7.0 9.0 10.0 7.0 9.0 11.0 3.5 4.0 4.5 – – –

10.0 2.5 3.5 4.5 6.0 8.0 9.5 7.0 9.0 11.0 8.0 10.0 12.0 4.5 5.0 6.0 – – –

20 – – – 6.0 9.0 11.0 8.0 12.0 13.0 10.0 12.0 14.0 7.0 8.5 9.5 – – –

20

3.0 2.0 3.0 4.5 4.0 5.0 6.0 6.0 7.0 8.0 7.0 9.0 11.0 5.0 7.0 8.5 7.0 8.0 10.0

10.0 2.0 3.0 4.0 5.0 7.0 9.0 7.0 9.0 10.0 8.0 10.0 12.0 6.0 7.0 8.0 7.0 8.0 10.0

20 2.0 3.0 4.0 6.0 7.0 9.0 8.0 10.0 12.0 9.0 12.0 14.0 7.0 8.0 10.0 7.0 8.0 10.0

30

3.0 2.0 3.0 4.5 3.0 4.0 5.0 5.0 6.0 7.0 6.0 8.0 10.0 5.5 6.5 7.0 7.0 9.0 11.0

10.0 2.0 3.0 4.5 4.0 4.5 6.0 6.0 7.5 10.0 7.0 9.0 11.0 7.0 9.0 10.0 7.0 9.0 12.0

20 2.0 3.0 4.0 4.5 6.0 8.0 7.0 9.0 12.0 8.0 10.0 12.0 8.0 10.0 12.0 8.0 9.0 11.0

40

3.0 2.5 3.5 6.0 3.5 4.5 7.0 5.0 6.0 8.0 6.0 8.0 10.0 6.0 8.0 9.0 7.0 9.0 11.0

10.0 2.0 3.0 5.0 4.0 5.0 7.5 5.0 7.0 9.0 7.0 9.0 11.0 6.0 8.0 9.5 7.0 9.0 11.0

20 2.0 3.0 4.5 4.0 5.5 8.0 6.0 8.0 10.0 8.0 9.0 11.0 6.0 8.5 10.5 8.0 10.0 12.0

60

3.0 2.5 3.5 6.0 3.0 4.5 6.0 4.0 5.0 6.0 5.0 7.0 9.0 6.5 7.5 9.0 7.0 9.0 11.0

10.0 2.5 3.0 5.0 3.5 4.0 6.5 4.5 5.0 7.0 7.0 9.0 11.0 6.5 9.0 11.0 8.0 10.0 12.0

20 2.0 3.0 4.5 3.5 5.0 7.0 5.0 7.0 9.0 7.0 9.0 11.0 6.5 9.0 12.0 8.0 10.0 12.0

PERFORMANCE DATA VMAU *At the stated pressure in psi.



EXTERNAL MIX

AIR ATOMIZING


SpraySet-up

No.

SpraySet-up


Combination


Atom.Air

Press.

WaterPress.


Press.

Capacity

Press. Cap.gph

0 5 10 20 30 40

AtomizingAir

scfm

FanAir


SUVM67

Fluid CapVMF2850

+Air Cap

VMA67255-60

10.0

15.0

20

30

40

50

60

70

80

90

.58

.73

.84

1.1

1.3

1.6

1.8

2.0

2.3

2.5

2.0

2.6

3.1

3.9

4.6

5.8

6.6

7.5

8.3

9.0

1.0

3.0

5.0

10.0

15.0

20

1.26

2.2

2.8

4.0

4.9

5.6

10.0

3.0 2.0 3.0 5.0 7.0 9.0 14.0 9.0 12.0 15.0 9.0 10.0 12.0 – – – – – –

10.0 – – – 8.5 11.0 15.0 12.0 15.0 21 15.0 18.0 19.0 – – – – – –

20 – – – – – – 10.0 12.0 16.0 14.0 18.0 23 15.0 19.0 23 – – –

20

3.0 2.5 3.0 4.5 6.0 7.0 9.0 7.5 9.0 11.0 8.0 10.0 13.0 5.5 6.5 8.0 8.0 9.0 12.0

10.0 – – – 6.0 8.0 11.0 9.0 11.0 15.0 12.0 15.0 19.0 11.0 12.0 14.0 11.0 12.0 12.0

20 – – – 7.0 9.0 12.0 10.0 12.0 17.0 13.0 17.0 20 14.0 17.0 20 17.0 20 23

30

3.0 2.5 3.0 4.5 5.0 6.0 8.0 6.0 8.0 9.0 8.0 10.0 13.0 5.0 5.5 6.5 7.0 8.0 10.0

10.0 – – – 5.0 7.0 10.0 8.0 11.0 15.0 11.0 14.0 19.0 9.0 11.0 12.0 9.0 10.0 12.0

20 – – – – – – 8.0 11.0 14.0 11.0 14.0 19.0 12.0 16.0 19.0 16.0 20 22

40

3.0 2.5 3.5 5.0 4.0 5.0 7.5 5.0 7.0 10.0 8.0 9.0 11.0 5.5 6.5 8.0 7.0 9.0 11.0

10.0 2.0 3.0 4.5 4.5 5.5 8.0 7.0 8.0 11.0 9.0 12.0 16.0 9.0 10.0 11.5 11.0 13.0 15.0

20 – – – 4.5 6.0 9.0 7.0 9.0 13.5 10.0 12.0 16.0 10.0 12.5 16.0 13.0 18.0 21

60

3.0 2.5 3.5 5.5 4.0 4.5 7.0 5.0 6.0 8.0 7.0 9.0 11.0 5.5 6.5 7.5 7.0 9.0 11.0

10.0 2.5 3.5 5.5 4.5 5.0 7.5 6.0 7.0 9.5 8.0 11.0 13.0 6.5 9.0 11.0 8.0 10.0 12.0

20 2.0 3.0 4.5 4.0 5.5 8.0 6.0 8.0 10.0 8.0 11.0 14.0 9.0 11.0 15.0 10.0 14.0 16.0

SUVM113A

Fluid CapVMF3578

+Air Cap

VMA113289-60

10.0

15.0

20

30

40

50

60

70

80

90

1.6

2.0

2.4

3.3

3.6

4.5

5.2

5.9

6.5

7.2

3.9

4.8

5.8

7.6

9.3

11.0

12.7

14.4

15.9

17.6

1.0

3.0

5.0

10.0

15.0

20

2.1

3.6

4.7

6.6

8.0

9.4

10.0

3.0 – – – 8.0 10.5 14.0 10.0 13.0 17.0 8.0 10.0 13.0 – – – – – –

6.0 – – – 10.0 12.0 16.0 12.0 14.0 18.0 – – – – – – – – –

10.0 – – – 12.0 14.0 16.5 12.0 16.5 22 – – – – – – – – –

20

3.0 1.5 2.0 3.0 5.0 7.0 10.0 8.0 11.0 14.0 8.5 12.0 14.0 7.0 8.5 11.0 5.5 7.0 9.0

6.0 – – – 7.0 9.0 12.0 9.0 12.0 15.0 – – – – – – – – –

10.0 – – – 7.0 9.0 12.0 10.5 13.5 16.5 – – – – – – – – –

30

3.0 2.0 2.5 3.5 4.0 5.0 7.0 6.0 8.0 11.0 8.0 11.0 14.0 8.0 10.5 13.0 7.5 9.0 11.0

6.0 – – – 5.0 7.0 10.0 6.5 10.0 13.0 9.0 12.0 15.5 9.0 11.0 12.0 – – –

10.0 – – – 4.5 6.0 8.0 6.5 10.0 13.0 10.0 14.0 16.0 – – – – – –

40

3.0 2.0 2.5 4.0 4.0 5.0 6.0 5.5 7.5 11.0 8.0 10.5 14.0 8.0 10.0 13.0 7.5 8.5 12.0

6.0 2.5 3.5 5.56 4.0 5.0 7.5 6.0 8.0 10.0 9.0 11.5 16.0 8.0 11.0 14.0 8.0 8.5 12.0

10.0 2.0 3.0 4.0 4.5 6.0 8.5 6.5 9.0 12.0 10.0 14.0 18.5 10.0 13.5 18.0 8.5 10.5 14.5

60

3.0 2.0 2.5 3.0 2.0 4.0 5.0 5.0 6.5 8.0 8.0 10.0 12.0 7.5 9.5 14.0 7.5 9.5 12.0

6.0 2.5 3.0 4.5 4.0 4.5 6.0 5.5 7.0 9.5 8.0 10.0 13.0 10.0 12.0 15.0 9.0 12.0 15.0

10.0 2.5 3.0 5.0 4.0 4.5 7.5 5.5 7.5 9.5 8.5 11.0 10.0 10.0 12.5 18.0 9.0 12.0 15.0

SUVM113

Fluid CapVMF4078

+Air Cap

VMA113289-60

10.0

15.0

20

30

40

50

60

70

80

90

1.6

2.0

2.4

3.3

3.6

4.5

5.2

5.9

6.5

7.2

3.9

4.8

5.8

7.6

9.3

11.0

12.7

14.4

15.9

17.6

1.0

3.0

5.0

10.0

15.0

20

2.9

4.9

6.4

9.0

11.0

12.8

10.0

3.0 2.0 2.5 4.0 7.0 7.5 17.0 11.0 15.0 18.0 10.0 13.5 15.0 – – – – – –

6.0 – – – 8.0 11.5 17.0 12.0 17.0 22 – – – – – – – – –

10.0 – – – 9.0 13.0 18.0 12.0 17.0 23 – – – – – – – – –

20

3.0 2.0 3.0 5.0 6.5 9.0 11.0 9.0 13.0 18.0 10.0 13.0 16.5 – – – – – –

6.0 2.0 4.0 5.0 7.0 9.0 12.0 9.5 12.0 17.0 14.0 15.0 18.5 – – – – – –

10.0 – – – 6.5 10.5 14.0 11.0 14.0 18.5 16.0 19.0 20 – – – – – –

30

3.0 2.0 2.5 4.0 5.0 7.0 11.0 7.0 11.0 13.5 9.0 12.0 17.0 8.0 11.0 13.0 – – –

6.0 1.5 2.5 3.0 5.0 7.5 10.0 8.0 10.0 14.5 11.0 13.5 16.0 10.0 12.0 15.5 7.5 10.0 14.0

10.0 – – – 5.5 8.0 11.0 8.0 10.5 14.0 11.5 15.0 20.5 12.0 15.0 18.0 9.5 12.0 17.0

40

3.0 1.5 2.5 4.5 4.0 6.0 8.0 6.5 8.5 12.0 9.0 12.0 16.0 8.5 11.5 15.0 8.5 11.0 14.5

6.0 1.5 2.5 4.0 4.5 6.0 8.0 7.0 9.0 12.5 10.0 13.0 17.0 10.5 12.0 16.0 8.5 11.0 15.0

10.0 2.0 3.0 8.0 4.5 6.5 7.5 7.0 10.0 14.5 10.0 14.0 19.0 11.0 13.0 17.0 10.0 12.0 19.0

60

3.0 2.0 3.0 4.0 3.5 5.0 7.0 6.0 7.5 10.0 8.0 11.0 14.0 9.0 11.0 15.0 8.0 10.5 14.0

6.0 2.0 3.0 4.0 5.0 7.5 6.0 8.0 10.5 12.0 9.0 12.5 15.5 9.0 12.5 18.0 9.5 11.5 16.5

10.0 2.0 3.0 4.0 3.5 5.0 8.0 6.0 8.0 13.0 8.5 10.5 16.5 9.5 13.0 16.0 9.5 12.5 16.5




EXTERNAL MIX

AIR ATOMIZING


SpraySet-up

No.

SpraySet-up


Combination


Atom.Air

Press.

WaterPress.


Press.

Capacity

Press. Cap.gph

0 5 10 15 20 25

AtomizingAir

scfm

FanAir


SUVM128

Fluid CapVMF60100

+Air Cap

VMA1282100-60

10.0

15.0

20

30

40

50

60

70

80

90

1.8

2.2

2.6

3.4

4.3

5.0

5.8

6.6

7.4

8.0

4.9

5.9

7.0

9.1

11.2

13.3

15.3

17.2

19.2

21

1.0

3.0

5.0

10.0

15.0

20

6.6

10.8

13.8

19.8

24

28.2

10.0

1.0 – – – 10.0 13.5 21 13.0 16.0 22 12.0 16.0 21 – – – – – –

3.0 – – – 9.5 12.5 19.0 14.0 18.0 24 12.5 17.0 24 12.0 16.0 20 – – –

6.0 – – – 10.0 13.0 20 14.0 19.0 26 16.0 22 30 18.0 24.5 34 19.0 24 33

20

1.0 – – – 6.0 8.5 13.0 8.0 11.0 17.5 9.5 13.0 17.5 8.0 12.0 14.0 8.0 10.5 12.0

3.0 – – – 7.0 10.0 14.5 9.0 12.5 18.0 10.0 14.0 20 9.5 13.0 18.5 10.0 13.0 16.0

6.0 – – – 7.5 10.5 14.5 10.0 14.0 19.5 12.0 17.5 24 11.0 17.5 26 12.0 18.0 27

30

1.0 1.5 3.0 4.5 5.0 7.0 9.5 7.0 10.0 14.0 9.0 11.0 14.0 10.0 14.0 17.0 9.5 12.0 16.0

3.0 2.0 3.0 5.0 5.5 8.0 13.5 8.0 11.0 15.0 9.5 13.0 19.0 10.0 14.0 19.0 10.0 13.0 16.5

6.0 1.0 3.0 5.0 4.5 6.0 9.5 8.0 11.0 16.0 9.5 13.0 19.0 10.0 14.5 21.5 12.0 16.0 22

40

1.0 2.0 3.0 5.5 5.0 6.0 9.0 6.0 9.0 13.0 8.0 11.0 15.5 8.5 11.5 14.5 9.0 13.0 17.0

3.0 2.5 3.0 5.5 5.0 7.0 10.0 6.5 9.5 14.0 8.0 12.0 18.0 10.0 13.0 19.0 10.0 13.5 19.0

6.0 2.0 3.0 4.0 5.0 7.0 10.0 6.0 10.0 15.0 9.0 13.0 18.0 10.0 14.0 20 11.0 14.5 22

60

1.0 3.0 4.0 6.0 4.5 6.0 9.0 5.5 8.0 12.0 6.5 10.0 14.0 8.5 9.0 14.5 8.5 12.0 16.0

3.0 3.0 4.0 6.0 4.5 6.5 9.5 6.0 8.5 12.0 7.0 10.0 14.0 9.0 11.0 16.0 9.0 12.0 16.5

6.0 2.5 3.5 4.0 4.0 5.5 7.5 5.0 7.0 11.0 6.5 9.0 13.5 8.0 11.0 17.0 9.0 12.0 18.0

SUVM152

Fluid CapVMF80125

+Air Cap

VMA1522110-60

10.0

15.0

20

30

40

50

60

70

80

90

2.1

2.6

3.2

4.1

5.0

5.9

6.9

7.0

7.7

8.7

5.1

6.2

7.3

9.5

11.7

13.9

16.0

18.0

20.1

22

1.0

3.0

5.0

10.0

15.0

20

12.6

19.2

24.6

36

43.2

49.8

10.0

1.0 – – – 10.5 13.0 21 13.0 17.0 26 13.0 19.0 27 13.0 18.0 24 10.0 15.0 21.5

3.0 – – – – – – 13.0 17.5 26 12.0 21 29 13.0 19.5 30 15.0 23 30

6.0 – – – – – – 14.0 19.0 26.5 16.5 21 28 16.0 24 34 – – –

20

1.0 – – – 6.0 8.0 13.0 9.5 13.0 18.5 10.0 15.0 22 8.0 12.0 14.0 9.0 14.0 21

3.0 – – – 7.0 9.5 15.0 10.0 14.0 20 11.0 15.5 20.5 9.5 13.0 18.5 12.5 13.0 25

6.0 – – – – – – 10.0 13.5 21 12.0 17.5 26 11.0 17.5 26 15.0 21 32

30

1.0 2.5 3.0 4.0 6.0 8.0 12.0 7.5 11.0 17.0 10.0 13.5 19.5 10.0 14.0 17.0 9.0 14.0 19.5

3.0 – – – 5.0 7.0 10.5 8.0 12.0 19.0 10.5 13.5 20 10.0 14.0 19.0 12.0 16.5 22.5

6.0 – – – – – – 8.5 11.0 16.0 11.0 14.0 20 10.0 14.5 21.5 12.0 16.0 24

40

1.0 2.0 3.0 3.0 4.0 5.0 6.0 6.0 8.0 12.0 8.0 12.0 16.5 8.5 11.5 14.5 9.0 13.0 18.0

3.0 – – – 5.0 7.5 10.0 7.0 10.0 15.0 8.5 12.5 18.0 10.0 13.0 19.0 10.0 15.0 21

6.0 – – – – – 10.0 7.0 10.0 14.0 8.5 12.0 17.0 10.0 14.0 20 11.0 16.0 23

60

1.0 1.5 2.0 3.0 3.0 5.0 6.5 6.5 7.5 10.5 8.0 10.0 14.0 8.5 9.0 14.5 8.0 12.0 18.0

3.0 2.0 3.0 3.5 5.0 5.0 7.5 6.0 8.5 12.0 7.0 10.0 14.5 9.0 11.0 16.0 10.0 13.0 18.5

6.0 – – – – – – 6.0 7.0 12.0 7.0 10.0 14.0 8.0 11.0 17.0 10.0 14.0 19.0



VA U S E R I E S P R E S S U R E S P R AY S E T- U P S

EXTERNAL MIX

AIR ATOMIZING

†Since the pressures of the air and liquid lines are independently controlled, any combination of these air and liquid pressures can be used. The total air capacity is the sum of the atomizing air scfm and the fan air. For instance, for atomizing air at 10 psi and fan air at 30 psi, the total is equal to .44 scfm + 4.4 scfm for a total of 4.84 scfm.

††At 0 psi fan air pressure the spray forms a round spray pattern. Request Data Sheets 37459M-V67B, 37459M-V67A and 37459M-V67.Spray set-ups are interchangeable, but each set-up uses a different needle size.


SpraySet-up

No.

SpraySet-up


Combination

Air Capacity*† Liquid Capacity*†Spray Coverage (inches) at Indicated Distance from Nozzle

Atom.Air

Press.

WaterPress.

Fan Air Pressure

Press.Atomizing

Airscfm

Fan Airscfm Press. Cap.

gph0†† 10 40 60

A B C A B C A B C A B C

SUV67B

Fluid CapVF1650

+Air Cap

VA67255-60

10.015.02030405060708090

.44

.53

.62

.821.01.31.51.72.02.2

2.22.73.34.45.56.67.68.69.6

10.6

3.03.05.05.0

10.010.015.015.02020

.7

.71.01.01.41.41.71.71.91.9

10.03.0 2.0 3.0 4.0 7.0 9.0 10.0 6.0 8.0 11.0 6.0 8.0 11.0

10.0 2.5 3.5 4.5 7.5 10.0 12.0 7.0 8.0 11.0 7.0 8.0 12.020 2.0 3.0 4.0 8.0 12.0 14.0 9.0 11.0 14.0 8.0 10.0 13.0

303.0 2.0 3.0 4.5 5.0 6.0 7.0 8.0 10.0 14.0 8.0 11.0 14.0

10.0 2.0 2.5 4.5 6.0 7.5 10.0 8.0 10.0 13.0 8.0 10.0 12.020 2.0 3.0 4.0 7.0 9.0 13.0 10.0 12.0 15.0 9.5 11.5 14.5

403.0 2.5 3.5 6.0 5.0 6.0 8.0 8.0 10.0 14.0 9.0 11.0 14.0

10.0 2.0 3.0 5.0 6.0 7.0 10.0 9.0 11.0 14.0 9.0 11.0 13.020 2.0 3.0 4.5 6.0 8.0 12.0 10.0 12.0 14.0 10.0 12.0 15.0

603.0 2.5 3.5 6.0 4.0 5.0 6.0 8.0 11.0 13.0 9.0 11.0 14.0

10.0 2.5 3.0 5.0 4.5 5.0 7.0 8.0 10.0 13.0 9.0 12.0 14.020 2.0 3.0 4.5 5.0 7.0 9.0 9.0 12.0 16.0 10.0 13.0 17.0

SUV67A

Fluid CapVF2050

+Air Cap

VA67255-60

10.015.02030405060708090

.44

.53

.62

.821.01.31.51.72.02.2

2.22.73.34.45.56.67.68.69.6

10.6

3.03.05.05.0

10.010.015.015.02020

1.11.11.51.52.12.12.52.52.92.9

10.03.0 2.0 3.0 4.0 8.0 10.0 12.0 6.5 8.5 11.0 6.0 9.0 12.0

10.0 2.5 3.5 4.5 8.0 12.0 15.0 9.0 14.0 18.0 7.0 10.0 13.020 2.0 3.0 4.0 8.0 12.0 15.0 – – – 8.0 10.0 13.0

303.0 2.0 3.0 4.5 5.5 7.0 8.0 8.0 10.0 14.0 8.0 11.0 14.0

10.0 2.0 3.0 5.0 7.0 9.0 12.0 10.0 12.0 14.0 9.0 10.0 13.020 2.0 3.0 4.0 7.0 10.0 13.0 13.0 16.0 18.0 9.5 11.5 14.5

403.0 2.5 3.5 5.5 5.0 6.5 9.0 8.0 10.0 14.0 9.0 11.0 14.0

10.0 2.0 3.0 5.0 6.5 7.5 6.5 9.5 11.5 14.0 9.0 12.0 15.020 2.0 3.0 4.5 6.5 8.5 12.5 11.5 15.0 17.0 11.0 14.0 18.0

603.0 2.5 3.5 6.0 4.5 5.5 7.0 8.0 10.5 13.0 9.0 11.0 14.0

10.0 2.5 3.5 5.5 5.0 6.0 8.5 9.0 11.0 14.0 10.0 12.0 14.020 2.0 3.0 4.5 5.5 7.5 9.5 10.0 14.0 18.0 11.0 14.0 18.0

SUV67

Fluid CapVF2850

+Air Cap

VA67255-60

10.015.02030405060708090

.44

.53

.62

.821.01.31.51.72.02.2

2.22.73.34.45.56.67.68.69.6

10.6

3.03.05.05.0

10.010.015.015.02020

2.22.22.82.84.04.04.94.95.65.6

10.03.0 2.0 3.0 5.0 9.0 12.0 15.0 7.0 9.0 11.0 7.0 9.0 12.0

10.0 2.0 2.5 4.0 12.0 15.0 21 12.0 20 23 – – –20 – – – 10.0 12.0 16.0 – – – – – –

303.0 2.5 3.0 4.5 6.0 8.0 9.0 8.0 10.0 13.0 8.0 10.0 13.0

10.0 2.0 3.0 5.0 8.0 11.0 15.0 11.0 13.0 13.0 10.0 11.0 13.020 2.0 2.5 4.0 8.0 11.0 14.0 16.0 20 22 – – –

403.0 2.5 3.5 5.0 5.0 7.0 10.0 8.0 10.0 13.0 8.0 11.0 13.0

10.0 2.0 3.0 5.0 7.0 8.0 11.0 11.0 13.0 15.0 10.0 12.0 13.020 2.0 3.0 5.0 7.0 9.0 13.5 13.0 18.0 21 12.0 17.0 21

603.0 2.5 3.5 5.5 5.0 6.0 8.0 8.0 10.0 13.0 8.0 10.0 13.0

10.0 2.5 3.5 5.5 6.0 7.0 9.5 10.0 13.0 16.0 11.0 13.0 15.020 2.0 3.0 4.5 6.0 8.0 10.0 12.0 17.0 21 13.0 18.0 21

28207-101-SS cap ring and 29154-001-BUC must be ordered separately from the spray set-up, but are included in the standard nozzle assembly. Please contact your sales engineer.


• The dimensions “A”, “B” and “C” of the flat spray pattern are controlled by the combination of fan air pressure and atomizing air pressure

• The liquid flow rate is constant and not affected by the air pressure

ABC

15" (38 cm)

6" (15 cm)

9" (23 cm)

Flat spraypattern

Air Caps External mix with fan air:

flat spray patternWithout fan air:

round spray pattern

Atomized liquidFan air

Fan air

PERFORMANCE DATA VAU *At the stated pressure in psi.


VA U S E R I E S P R E S S U R E S P R AY S E T- U P S

EXTERNAL MIX

AIR ATOMIZING


SpraySet-up

No.

SpraySet-up


Combination

Air Capacity*† Liquid Capacity*†Spray Coverage (inches) at Indicated Distance from Nozzle

Atom.Air

Press.

WaterPress.

Fan Air Pressure

Press.Atomizing

Airscfm

Fan Airscfm Press. Cap.

gph0†† 10 40 60

A B C A B C A B C A B C

SUV113A

Fluid CapVF3578

+Air Cap

VA113293-60

10.015.02030405060708090

1.62.02.43.24.04.75.56.37.07.8

3.54.45.47.28.9

10.612.314.015.517.2

3.03.05.05.0

10.010.015.015.02020

3.63.64.74.76.66.68.08.09.49.4

10.03.0 2.5 3.5 5.0 9.0 13.0 17.0 – – – – – –

10.0 2.0 3.0 4.5 10.0 14.0 16.0 – – – – – –20 – – – 9.0 13.0 17.0 18.0 24 29 – – –

303.0 2.5 3.0 5.0 4.0 5.0 7.0 11.0 14.0 18.0 12.0 15.0 18.0

10.0 2.5 3.5 5.0 5.0 7.0 9.0 13.0 16.0 22 18.0 21 2620 2.5 3.5 5.5 4.0 6.0 9.0 13.0 19.0 24 17.0 22 26

403.0 2.5 3.0 5.0 3.5 4.5 6.5 9.0 12.0 14.0 11.0 13.0 18.0

10.0 2.5 3.5 5.0 4.0 5.0 6.5 10.0 14.0 18.0 15.0 18.0 2220 2.5 3.5 5.0 4.0 5.5 8.0 11.0 15.0 21 15.0 20 25

603.0 2.5 3.5 5.0 3.0 4.0 6.0 8.0 10.0 13.0 10.0 12.0 17.0

10.0 2.5 3.5 4.5 3.0 4.0 6.0 8.0 11.0 14.0 11.0 15.0 18.020 2.5 3.5 4.5 3.0 4.5 7.0 10.0 12.0 16.0 12.0 17.0 22

SUV113

Fluid CapVF4078

+Air Cap

VA113293-60

10.015.02030405060708090

1.62.02.43.24.04.75.56.37.07.8

3.54.45.47.28.9

10.612.314.015.517.2

3.03.05.05.0

10.010.015.015.02020

4.94.96.46.49.09.0

11.011.012.812.8

10.03.0 3.0 4.0 6.0 9.0 12.0 18.0 – – – – – –

10.0 – – – 8.0 11.0 15.0 24 29 35 – – –20 – – – 9.0 12.0 15.0 21 28 – – – –

303.0 2.5 3.5 6.0 4.0 6.0 8.0 12.0 15.0 19.0 12.0 15.0 19.0

10.0 2.5 3.5 5.0 4.5 6.0 8.0 14.0 18.0 23 17.0 22 2520 2.0 3.0 5.0 4.5 6.0 9.0 14.0 18.0 27 18.0 23 27

403.0 2.5 3.5 6.0 3.5 5.0 7.0 10.0 13.0 17.0 12.0 14.0 18.0

10.0 2.5 3.5 5.5 4.0 6.0 8.0 12.0 16.0 20.0 15.0 18.0 2220 2.5 3.5 5.5 3.5 5.0 8.0 13.0 17.0 22 16.0 20 24

603.0 2.5 3.5 6.0 2.5 4.0 7.0 9.0 11.0 14.0 10.0 12.0 17.0

10.0 2.5 3.5 5.5 3.0 4.0 6.0 10.0 13.0 16.0 13.0 16.0 2020 2.5 3.5 5.5 3.0 4.0 6.0 9.0 13.0 17.0 12.0 17.0 23

SUV128

Fluid CapVF60100

+Air Cap

VA1282125-60

10.015.02030405060708090

1.62.02.43.13.94.75.46.27.07.8

3.94.96.08.1

10.212.314.316.318.220

3.03.05.05.0

10.010.015.015.02020

10.010.013.013.018.418.423232626

10.03.0 3.0 4.0 5.0 7.0 10.0 13.0 – – – – – –

10.0 – – – – – – 21 26 33 – – –20 – – – – – – 17.0 22 30 22 27 34

303.0 3.0 4.0 5.0 4.0 6.0 8.0 12.0 14.0 21 17.0 19.0 25

10.0 2.5 3.5 5.0 4.0 6.0 8.5 12.0 16.0 22 15.0 21 2820 – – – – – – 11.0 15.0 21 15.0 18.0 24

403.0 3.0 4.0 5.5 3.5 5.0 7.0 10.0 12.0 17.0 12.0 17.0 21

10.0 2.5 3.5 5.0 4.0 5.0 7.0 11.0 14.0 20 14.0 18.0 2520 2.5 3.5 5.0 3.0 5.0 8.0 9.0 13.0 17.0 13.0 18.0 24

603.0 3.0 4.0 6.0 3.0 4.0 6.0 8.0 10.0 13.0 10.0 13.0 18.0

10.0 3.0 4.0 5.0 3.5 4.5 7.0 9.0 12.0 16.0 12.0 16.0 2120 3.0 3.5 5.0 3.0 4.0 5.5 8.0 10.0 15.0 12.0 16.0 21

SUV152

Fluid CapVF80125

+Air Cap

VA1522125-60

10.015.02030405060708090

1.82.22.63.64.45.36.27.07.88.6

3.94.85.87.89.8

11.713.615.417.218.8

3.03.05.05.0

10.010.015.015.02020

18.318.32424333341414747

10.03.0 3.0 4.0 5.0 8.0 11.0 15.0 – – – – – –

10.0 – – – – – – 21 27 35 – – –20 – – – – – – 18.0 22 30 – – –

303.0 3.0 4.0 5.0 5.0 6.5 9.0 13.0 18.0 23 – – –

10.0 – – – 5.0 7.0 9.0 13.0 17.0 22 18.0 25 2720 – – – – – – 13.0 17.0 22 17.0 22 29

403.0 3.0 4.0 5.5 5.0 6.0 9.0 11.0 15.0 19.0 17.0 24 30

10.0 3.0 3.5 5.0 4.5 5.5 7.5 11.0 15.0 20 16.0 20 2920 – – – – – – 10.0 14.0 20 14.0 19.0 27

603.0 3.0 4.0 6.0 4.0 6.0 8.0 9.0 12.0 16.0 14.0 17.0 21

10.0 3.0 4.0 6.5 4.0 6.5 7.5 10.0 13.0 17.0 13.0 17.0 2320 2.5 3.0 5.0 3.5 4.5 6.0 7.0 12.0 15.0 12.0 16.0 21

† Since the pressures of the air and liquid lines are independently controlled, any combination of these air and liquid pressures can be used. The total air capacity is the sum of the atomizing air scfm and the fan air. For instance, for atomizing air at 10 psi and fan air at 30 psi, the total is equal to .44 scfm + 4.4 scfm for a total of 4.84 scfm.

††At 0 psi fan air pressure the spray forms a round spray pattern. Request Data Sheets 37459M-V113A, 37459M-V113, 37459M-V128 and 37459M-V152.Spray set-ups are interchangeable, but each set-up uses a different needle size.

PERFORMANCE DATA VAU *At the stated pressure in psi.


1 / 2 J S E R I E S

NOZZLE ASSEMBLIES

AIR ATOMIZING

1/2JBC Back Connect 1/2" NPT or BSPT (F)

inlet connection

1/2JBCJ Steam Jacket 3/8" NPT or BSPT (F)

steam inlet/outlet connection 1/2" NPT or BSPT (F)

air and liquid inlet connection

1/2–2J Twin Spray 1/2" NPT or BSPT (F)

inlet connection

CP4886 Thick Walls Please refer to data sheets

1/2J 1/2" NPT or BSPT

1/2JCO 1/2" NPT or BSPT


1/2JN 1/2" NPT or BSPT



• 1/2J air atomizing series ranges in capacity from 4.1 to 306 gph (15.5 to 1158 l/h)

• The nozzles are available with shut-off and clean-out needles

• 1/2J body has liquid and air feeds at opposite ends of the body and is provided with a removable plug so other needle assemblies may be added in the future

• 1/2JN features a manual shut-off needle that enables the flow of liquid to be stopped

• 1/2JCO features a clean-out needle that is activated manually

– The needle slides through the liquid orifice to clear obstructions


• 1/2JBC features the center lines of the air and liquid inlet entering in the back of the nozzle and parallel to the spray projection axis

• 1/2JBCJ features a steam jacket around the nozzle body for spraying liquids that are too viscous to spray at room temperature

• 1/2J–2J is a dual spray assembly with opposing spray set-ups perpendicular to opposing air and liquid inlets

• CP4886 thick wall adapters replace retainer rings on nozzle assemblies and fit into threaded wall openings holding the nozzle securely in place

1/2J

1/2JN

1/2JCO

Spray set-up

1 2 3 45

1. Retainer ring CP17052. Air cap3. Fluid cap4. Fluid cap gasket CP84915. Nozzle body CP1701

Plug CP1706


Clean-out needleassembly 11829

OVERVIEW – 1/2J SERIES


1 / 2 J S E R I E S

NOZZLE ASSEMBLIES

AIR ATOMIZING


Nozzle Type

J JN JCO

Nozzle Bodies

Nickel-plated Brass (none) l l l


Spray Set-Ups

Nickel-plated Brass Air Cap and 303 Stainless Steel Fluid Cap SSBR l l l


MATERIALS

ORDERING INFO


ExampleInlet

Conn.

Nozzle Body

Assembly Type


Spray Set-up

No.

Material Code 1/2 JN SS– –+ SU77 SS


BSPT connections require the addition of a “B” prior to the nozzle body inlet connection. To order Spray Set-Up only, use Spray Set-Up number (shown in performance charts) and material code: SU77 - SS. To order fluid cap only, use fluid cap number (shown in performance data charts) and material code: 250375-SS. To order air cap only, use air cap number (shown in performance data charts) and material code: 422-6-73-70°.




1 / 2 J S E R I E S P R E S S U R E S P R AY S E T- U P S

INTERNAL MIX | FLAT SPRAY | WIDE ANGLE ROUND AND ROUND SPRAY

AIR ATOMIZING

SprayDimensions

Air* Liquid* A(in.)

B(in.)

C(in.)

D(ft.)

20

30

10

15

17

18

28

29

35

36

18

19

10

20

32

44

64

5

15

25

35

55

20

34

34

36

36

34

62

62

66

67

47

83

82

85

89

13

15

17

19

21


SpraySet-up

No.

SpraySet-up


Combination

SprayPattern


Liquid Pressure

5 15 25 35 55




SU75

Fluid Cap250375

+Air Cap4533102

Flat

– – – 28 39 22.4 44 44.1 31.5 58 53 40 – – –

– – – 30 31.8 24 46 37.2 33.5 60 45.6 42 – – –

– – – 32 24.6 25.9 48 31.2 35.1 63 38 44 – – –

– – – 34 19.8 27.5 50 27 36.9 65 31 47 – – –

SU85

Fluid Cap251376

+Air Cap4693102

Flat

10.0 35.4 11.1 18.0 103 15.4 26 155 17.7 36 180 23 54 222 29.1

12.0 26.4 13.4 20 81.6 17.6 28 135 20 38 162 25.4 56 198 31.2

– – – 22 63.6 19.8 30 115 22.5 40 147 27.8 58 186 34

– – – 24 49.3 22.6 32 100 25.1 42 131 30.2 60 180 36.3

– – – – – – 34 84 27.5 44 116 32.6 62 166 38.9

– – – – – – 36 69.5 30 46 101 35.1 64 154 41.6

– – – – – – 38 56.4 32.6 48 81.5 37.6 66 142 44.1

– – – – – – 40 45.7 35.3 50 75.6 40.2 68 130 46.6

– – – – – – – – – 52 62.4 42.7 70 119 49.3

– – – – – – – – – – – – 72 108 51.6

– – – – – – – – – – – – 74 97.4 54.2

– – – – – – – – – – – – 76 87.5 57.1

Air Caps Flat, wide angle round and round spray air caps produce flat, wide

angle round hollow cone spray and round hollow cone spray patterns

• For flat, wide angle round and round sprays, dimensions “A”, “B” and “C” are the pattern widths at distances from the nozzle





8491 gasket must be ordered separately from the spray set-up, but is included in the standard nozzle assembly. Please contact your sales engineer.

AB

C

27" (69 cm)

9" (23 cm)

18" (46 cm)

D

8491 gasket

Air cap

Fluid cap

1705 retainer ring




INTERNAL MIX | FLAT SPRAY | WIDE ANGLE ROUND AND ROUND SPRAY

AIR ATOMIZING

SprayDimensions

Air* Liquid* A(in.)

B(in.)

C(in.)

D(ft.)

30

40

60

25

35

55

13-1/2

13-1/2

14

19

19

19-1/2

26-1/2

26-1/2

27

22

24

28

1020365075

515253555

1313-1/2

1313-1/2

14

18-1/219

18-1/21919

25-1/226-1/225-1/226-1/2

27

2026212427

1230466080

515253555

1413-1/2

131414

19-1/219

18-1/219-1/219-1/2

2726-1/2

262728

2624232830

10

20

32

44

64

5

15

25

35

55

13

13

11

11

11

25

26

22

21

22

36

36

32

29

31

11

16

20

22

25

20

36

50

60

5

15

25

35

3-1/2

3-1/2

3-1/2

3-1/2

6-1/2

6-1/2

6-1/2

6-1/2

10

10

10

10

22

24

27

30

10

20

32

44

64

5

15

25

35

55

4

6

5

4

4

7

10

8

7

7

9

13

10

10

10

23

21

37

41

47


SpraySet-up

No.

SpraySet-up


Combination

SprayPattern


Liquid Pressure

5 15 25 35 55

AirPress. gph scfm Air

Press. gph scfm AirPress. gph scfm Air

Press. gph scfm AirPress. gph scfm

SU77

Fluid Cap250375

+Air Cap

422-6-73-70°

WideAngleRound

– – – – – – 28 33 8.4 40 28.8 11.3 58 66 12.2

– – – – – – 30 19.8 10.8 42 15.6 13.9 60 42 15.0

– – – – – – – – – – – – 62 25.2 18.2

SU78

Fluid Cap250375

+Air Cap

422-6-94-70°

WideAngleRound

8.0 27 6.5 18.0 42 7.0 32 47 11.0 46 42.6 18.1 70 81 29.5

10.0 15.0 8.2 20 29.4 8.8 34 36 12.8 48 32.4 20.2 75 33 34.5

12.0 8.4 9.8 22 20.2 10.5 36 25.2 14.7 50 25.8 22.2 80 22.2 39.6

– – – 24 14.4 12.2 38 18.6 16.6 52 19.8 24 – – –

– – – – – – 40 13.8 18.6 54 15.6 25.8 – – –

SU79

Fluid Cap250375

+Air Cap

469-6-125-70°

WideAngleRound

10.0 34.2 11.4 26 46.2 20.2 40 62.6 27.5 54 75.6 32.6 75 127 39

12.0 21.6 13.0 28 37.2 22 42 52.8 29.6 56 57 34.3 80 108 42.4

14.0 12.0 14.7 30 28.4 23.7 44 43.8 31.6 58 46.8 35.8 85 98 45.6

– – – 32 21.6 25.3 46 33.6 33.6 60 39 37.3 – – –

– – – 34 16.2 27 48 25.2 35.6 62 33 38.8 – – –

SU89

Fluid Cap251376

+Air Cap

469-6-130-70°

WideAngleRound

10.0 35.4 11.1 18.0 103 15.4 26 155 17.7 36 180 23 54 222 29.1

12.0 26.4 13.4 20 81.6 17.6 28 135 20 38 162 25.4 56 198 31.2

– – – 22 63.6 19.8 30 115 22.5 40 147 27.8 58 186 34

– – – 24 49.3 22.6 32 100 25.1 42 131 30.2 60 180 36.3

– – – – – – 34 84 27.5 44 116 32.6 62 166 38.9

– – – – – – 36 69.5 30 46 101 35.1 64 154 41.6

– – – – – – 38 56.4 32.6 48 81.5 37.6 66 142 44.1

– – – – – – 40 45.7 35.3 50 75.6 40.2 68 130 46.6

– – – – – – – – – 52 62.4 42.7 70 119 49.3

– – – – – – – – – – – – 72 108 51.6

– – – – – – – – – – – – 74 97.4 54.2

– – – – – – – – – – – – 76 87.5 57.1

SU72

Fluid Cap250375

+Air Cap4221250

Round

18.0 9.0 12.4 28 31.7 14.9 38 58 17.3 48 80 19.3 – – –

20 6.7 13.7 32 22.5 17.0 44 37.7 20.8 54 55.2 23.6 – – –

22 5.4 14.7 36 15.9 19.3 50 24.7 24.8 60 40 27.5 – – –

24 4.1 15.7 38 13.2 20.4 54 19.5 27.5 66 30 32.1 – – –

– – – 40 11.1 21.5 58 16.0 30.2 72 23.3 37 – – –

– – – 42 9.2 22.6 60 14.5 31.8 78 18.3 42.2 – – –

SU82

Fluid Cap251376

+Air Cap4691312

Round

10.0 35.4 11.1 18.0 103 15.4 26 155 17.7 36 180 23 54 222 29.1

12.0 26.4 13.4 20 81.6 17.6 28 135 20 38 162 25.4 56 198 31.2

– – – 22 63.6 19.8 30 115 22.5 40 147 27.8 58 186 34

– – – 24 49.3 22.6 32 100 25.1 42 131 30.2 60 180 36.3

– – – – – – 34 84 27.5 44 116 32.6 62 166 38.9

– – – – – – 36 69.5 30 46 101 35.1 64 154 41.6

– – – – – – 38 56.4 32.6 48 81.5 37.6 66 142 44.1

– – – – – – 40 45.7 35.3 50 75.6 40.2 68 130 46.6

– – – – – – – – – 52 62.4 42.7 70 119 49.3

– – – – – – – – – – – – 72 108 51.6

– – – – – – – – – – – – 74 97.4 54.2

– – – – – – – – – – – – 76 87.5 57.1

PERFORMANCE DATA WIDE ANGLE ROUND AND ROUND SPRAY *At the stated pressure in psi.




AIR ATOMIZING

SprayDimensions

Air* Liquid* A(in.)

B(in.)

C(in.)

D(ft.)

35

50

55

70

90

3

5

7

10

15

8-1/2

9

9-1/2

9-1/2

10

14-1/2

16-1/2

17-1/2

18

19

20-1/2

21-1/2

23

24

26

19

22

23

25

29


SpraySet-up

No.

SpraySet-up


Combination


Liquid Pressure

3 5 7 10 15




SUE75

Fluid Cap250375

+Air Cap14356

30 138 31 40 180 38 45 210 41.5 55 252 48 80 306 65

35 138 34 45 180 41.5 50 210 45 60 252 51.5 85 306 69

40 138 38 50 180 45 55 210 48 70 252 58 90 306 72

45 138 41.5 55 180 48 60 210 51.5 75 252 62 95 306 75

– – – 60 180 51.5 65 210 55 80 252 65 100 306 78

– – – – – – 70 210 58 85 252 69 – – –


• The dimensions “A”, “B” and “C” are the pattern widths at distances from the nozzle


• SUE75 and SU380C are pressure set-ups using pressurized liquids

• In SU380C, the air and liquid mix internally, while in SUE75, they mix externally

• SU70 is a siphon set-up with the air and siphoned liquid mixing externally


AB

C

27" (69 cm)

9" (23 cm)

18" (46 cm)

D

8491 gasket

Air capFluid cap

1705 retainer ring

Flat spraypattern

Air Caps Flat spray air caps produce




1 J S E R I E S

NOZZLE ASSEMBLIES

AIR ATOMIZING

MATERIALS


Nozzle Type

J JN

Nozzle Bodies

Nickel-plated Brass (none) l l

303 Stainless Steel SS l l

Spray Set-Ups

Nickel-plated Brass Air Cap and303 Stainless Steel Fluid Cap SSBR l l



• Range in capacity from 24 to 1740 gph (91 to 6586 l/h)

• Available with a shut-off needle

• 1J features liquid and air feeds at opposite ends of the body and are provided with a removable plug so other needle assemblies may be added in the future

• 1JN features a manual shut-off needle that enables the flow of liquid to be stopped

1J 1" NPT or BSPT (F)

1JN 1" NPT or BSPT (F)


1J

1JN

Spray set-up

1 2 34

1. Retainer ring CP57132. Air cap3. Fluid cap4. Nozzle body CP5710

Plug CP1706


OVERVIEW – 1J SERIES AIR ATOMIZING

ORDERING INFO


ExampleInlet

Conn.

Nozzle Body

Assembly Type


Spray Set-up

No.

Material Code 1 JN SS– –+ SU159 SS


BSPT connections require the addition of a “B” prior to the nozzle body inlet connection. To order Spray Set-Up only, use Spray Set-Up number (shown in performance charts) and material code: SU159 - SS. To order fluid cap only, use fluid cap number (shown in performance data charts) and material code: 4371000-SS. To order air cap only, use air cap number (shown in performance data charts) and material code: 1109-6-224-70-SS.To order spray nozzle without set-up, use inlet connection, nozzle body and material code: 1JN-SS.



1 J S E R I E S P R E S S U R E S P R AY S E T- U P S

INTERNAL MIX | ROUND AND FLAT SPRAY

AIR ATOMIZING

SprayDimensions

Air* Liquid* A(in.)

B(in.)

C(in.)

D(ft.)

14

26

32

38

46

50

60

60

86

10

20

20

30

30

40

40

60

60

19

21

17

21

16

20

17

22

15

37

40

33

41

33

44

40

47

31

55

59

47

58

49

62

54

67

41

14

19

25

29

37

37

46

42

61


SpraySet-up

No.

SpraySet-up


Combination

SprayPattern

Liquid Capacity (gallons per minute)* and Air Capacity (standard cubic feet per minute)*

Liquid Pressure

10 20 30 40 60

Air Press. gpm scfm Air

Press. gpm scfm Air Press. gpm scfm Air

Press. gpm scfm Air Press. gpm scfm

SU159

Fluid Cap4371000

+Air Cap

1109-6-224-70°

WideAngleRound

12.0 3.2 43 22 5.1 52 32 6.5 64 42 7.7 79 60 10.6 99

14.0 2.4 51 24 4.1 62 34 5.5 75 44 6.7 90 62 9.5 108

16.0 1.7 61 26 3.3 72 36 4.5 86 46 5.7 100 64 8.4 118

– – – 28 2.6 85 38 3.6 96 48 4.9 110 66 7.5 130

– – – 30 2.0 94 40 3.1 106 50 4.2 120 68 6.8 142

– – – 32 1.6 104 42 2.6 116 52 3.6 132 70 6.1 152

– – – – – – 44 2.2 128 54 3.1 140 72 5.5 166

– – – – – – 46 1.8 136 56 2.7 150 74 5.0 178

– – – – – – – – – 58 2.3 164 76 4.5 190


• For wide angle round, round and flat sprays, dimensions “A”, “B” and “C” are the pattern widths at distances from the nozzle




5713 retainer ring must be ordered separately from the spray set-up, but is included in the standard nozzle assembly. Please contact your sales engineer.

AB

C

48" (122 cm)

12" (30 cm)

30" (76 cm)

D

Air capFluid cap

5713 retainer ring

Air Caps Wide angle round, round and flat

spray air caps produce hollow cone, wide angle round spray, round and

flat spray patterns

PERFORMANCE DATA WIDE ANGLE ROUND *At the stated pressure in psi.


1 J S E R I E S P R E S S U R E S P R AY S E T- U P S

INTERNAL MIX | WIDE ANGLE ROUND SPRAY | ROUND AND FLAT SPRAY

AIR ATOMIZING

SprayDimensions

Air* Liquid* A(in.)

B(in.)

C(in.)

D(ft.)

14

26

32

38

46

50

60

60

86

10

20

20

30

30

40

40

60

60

4

4

4

4

4

4

4

5

4

8

8

9

9

10

9

10

9

10

12

13

13

13

14

14

15

13

15

30

36

41

45

53

54

63

59

83

14

24

36

46

65

10

20

30

40

60

6

6

6

6

6

11

11

10

10

11

13

14

14

14

15

25

30

35

42

50

14

26

32

38

46

50

60

60

86

10

20

20

30

30

40

40

60

60

29

32

23

34

27

37

29

49

25

60

64

50

72

52

72

59

88

63

84

92

70

96

70

104

88

126

92

21

23

26

27

30

30

33

31

39


SpraySet-up

No.

SpraySet-up


Combination

SprayPattern


Liquid Pressure

10 20 30 40 60




SU152

Fluid Cap4371000

+Air Cap

11091547

Round

12.0 3.2 43 22 5.1 52 32 6.5 64 42 7.7 79 60 10.6 99

14.0 2.4 51 24 4.1 62 34 5.5 75 44 6.7 90 62 9.5 108

16.0 1.7 61 26 3.3 72 36 4.5 86 46 5.7 100 64 8.4 118

– – – 28 2.6 85 38 3.6 96 48 4.9 110 66 7.5 130

– – – 30 2.0 94 40 3.1 106 50 4.2 120 68 6.8 142

– – – 32 1.6 104 42 2.6 116 52 3.6 132 70 6.1 152

– – – – – – 44 2.2 128 54 3.1 140 72 5.5 166

– – – – – – 46 1.8 136 56 2.7 150 74 5.0 178

– – – – – – – – – 58 2.3 164 76 4.5 190

SU172

Fluid Cap6251000

+Air Cap

11251625

Round

12.0 5.92 48.5 20 11.0 42.5 30 13.2 55 40 15.1 66 60 18.3 79

14.0 4.40 82 22 9.1 60 32 11.7 69 42 13.8 78 65 15.8 107

16.0 3.45 128 24 7.8 80 34 10.4 85 44 12.6 93 70 13.5 138

18.0 2.75 187 26 6.72 110 36 9.4 102 46 11.6 109 – – –

– – – 28 5.95 143 38 8.45 125 48 10.7 125 – – –

– – – 30 5.25 183 40 7.75 150 50 9.7 145 – – –

SU155

Fluid Cap4371000

+Air Cap

11093187

Flat

12.0 3.2 43 22 5.1 52 32 6.5 64 42 7.7 79 60 10.6 99

14.0 2.4 51 24 4.1 62 34 5.5 75 44 6.7 90 62 9.5 108

16.0 1.7 61 26 3.3 72 36 4.5 86 46 5.7 100 64 8.4 118

– – – 28 2.6 85 38 3.6 96 48 4.9 110 66 7.5 130

– – – 30 2.0 94 40 3.1 106 50 4.2 120 68 6.8 142

– – – 32 1.6 104 42 2.6 116 52 3.6 132 70 6.1 152

– – – – – – 44 2.2 128 54 3.1 140 72 5.5 166

– – – – – – 46 1.8 136 56 2.7 150 74 5.0 178

– – – – – – – – – 58 2.3 164 76 4.5 190

PERFORMANCE DATA ROUND AND FLAT SPRAY *At the stated pressure in psi.


1J SERIES PRESSURE SPRAY & SIPHON/GRAVITY-FED SPRAY SET-UPS

EXTERNAL MIX | FLAT SPRAY | ROUND SPRAY

AIR ATOMIZING

SprayDimensions

Air* Liquid* A(in.)

B(in.)

C(in.)

D(ft.)

3040506070

3571015

2022232222

3637393839

4748514950

2528303235


Air* A(in.)

B(in.)

C(in.)

D(ft.)

30

40

60

80

100

5

5

5

5

5

10

10

10

10

10

15

15

15

15

15

29

35

44

54

64


SpraySet-up

No.

SpraySet-up


Combination

SprayPattern


Liquid Pressure

3 5 7 10 15




SUE175B

Fluid Cap625780

+Air Cap12116

Flat

20 13.0 87 25 17.0 101 30 20 115 40 23 140 50 29 16625 13.0 101 30 17.0 115 40 20 140 50 23 166 60 29 19130 13.0 115 40 17.0 140 50 20 166 60 23 191 70 29 21640 13.0 140 50 17.0 166 60 20 191 70 23 216 80 29 24250 13.0 166 60 17.0 191 70 20 216 80 23 242 90 29 26860 13.0 191 70 17.0 216 80 20 242 90 23 268 – – –


SpraySet-up

No.

SpraySet-up


Combination

AtomizingAir

Liquid Capacity(gallons per minute)*

AirPress.

AirCapacity

scfm


18 12 6 4 8 12 18

SU170

Fluid Cap6251000

+Air Cap

1125

20 105 – – 3.4 1.9 – – –25 120 5.2 4.5 3.6 2.2 – – –30 135 5.3 4.6 3.8 2.4 1.4 – –40 165 5.4 4.7 3.9 2.6 1.8 1.1 –60 225 5.5 4.9 4.2 2.9 2.2 1.5 .4080 285 5.6 5.0 4.4 3.0 2.3 1.6 .50100 345 5.7 5.1 4.5 3.1 2.4 1.7 .60

Refer to page B4 for Siphon/Gravity-Fed Liquid Set-ups.


ROUND SPRAY SIPHON SET-UPS *At the stated pressure in psi.


• For flat spray, dimensions “A”, “B” and “C” are the pattern widths at distances from the nozzle

– The total distance of spray projection from the nozzle to the maximum dispersal point is represented by “D”

– When using a pressure-fed liquid system, the liquid is supplied to the nozzle under pressure

– The liquid and compressed air or gas are mixed externally to produce a completely atomized spray

• For round spray, dimensions “A”, “B” and “C” are the pattern widths at distances from the nozzle

– The total distance of spray projection from the nozzle to the maximum dispersal point is represented by “D”

– When using a siphon or gravity-fed liquid system, the liquid is supplied by either a liquid siphon or a gravity-feed

– Designed to draw liquid through the feed line into the air flow where it is atomized

AB

C

48" (122 cm)

12" (30 cm)

30" (76 cm)

D

Air cap Fluid cap

12415 retainer ring

Flat spraypattern

12415 retainer ring must be ordered separately from the spray set-up, but is included in the standard nozzle assembly. Please contact your sales engineer.

Air Caps Flat spray and round spray air caps produce a flat spray pattern and the

siphon air caps produce a round spray pattern


A I R J E T ® F O G G E R S P R AY N O Z Z L E S

SPECIAL PURPOSE

AIR ATOMIZING

Nozzle Inlet(in.)

AirJet FoggerType Fluid Orifice No.

OrificeDia. Nom.

(in.)

1/4 23412

16.0 .016

20 .020

26 .026

To Clamp OnPipe Size

(in.)

AirJet FoggerType

Fluid OrificeNo.

OrificeDia. Nom.

(in.)

1/2

QJ25655

16.0 .016

3/4 20 .020

1 26 .026

SPECIFICATIONS


• 23412 produces high quality, cost-efficient dry fog

– Drops average fifteen microns in size and less

– Drop size is adjustable to meet specific industrial needs by changing the ratio of compressed air to water

– Maintenance time is reduced because the built-in check valve, spray tip and internal strainer are quickly serviced without tools

– Can use PVC pipe and low-pressure air tubing

– Tip has a relatively large clog-reducing orifice

• QJ25655 provides fast installation of the nozzle onto the liquid supply pipe – no additional pipe fittings are required

– Pipe cutting, threading and brazing are eliminated

– Features a chemical-resistant, tight-fitting Buna-N seal to ensure leak-free performance

23412 1/4" NPT or BSPT (F)

threaded type

QJ25655 Split-eyelet type to clamp on

1/2", 3/4", 1" pipe size

ORDERING INFO

23412 COMPLETE NOZZLE ASSEMBLY

ExampleNozzle Body 23412

Inlet Conn. 1/4– –– –

Fluid Orifice

Dia. 20

Q525655 COMPLETE NOZZLE ASSEMBLY

ExampleNozzle Body QJ25655

Pipe Size 3/4– –– –

Fluid Orifice

Dia. 20

BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.


A I R J E T ® F O G G E R S P R AY N O Z Z L E S

SPECIAL PURPOSE

AIR ATOMIZING


WaterPressure

Fluid Orifice No. 16 (.016" Dia.)

Air Pressure*

10 20 30 40 50 60 70 80

20†1.2 1.1 – – – – – –

1.5 2.5 – – – – – –

301.7 1.6 1.2 – – – – –

1.4 2.4 3.4 – – – – –

402.0 1.6 1.5 1.4 – – – –

1.4 2.4 3.3 4.2 – – – –

502.1 1.9 1.7 1.5 1.3 – – –

1.4 2.3 3.2 4.2 5.0 – – –

602.3 2.1 1.9 1.7 1.4 1.3 0.8 –

1.3 2.3 3.2 4.1 5.0 5.8 6.8 –

702.6 2.4 2.2 1.9 1.7 1.7 1.5 1.0

1.3 2.3 3.1 4.0 4.9 5.7 6.7 7.6

802.7 2.6 2.4 2.2 2.0 1.9 1.7 1.6

1.3 2.2 3.1 4.0 4.9 5.7 6.6 7.5

902.9 2.8 2.6 2.4 2.2 2.0 1.9 1.9

1.2 2.1 3.1 3.9 4.7 5.7 6.5 7.5

1003.1 3.0 2.8 2.6 2.4 2.3 2.2 2.2

1.2 2.1 3.0 3.9 4.7 5.6 6.5 7.5


WaterPressure


Air Pressure*

10 20 30 40 50 60 70 80

20†3.1 1.7 – – – – – –

1.4 2.8 – – – – – –

303.6 2.1 1.7 – – – – –

1.3 2.5 3.6 – – – – –

404.3 3.1 2.2 – – – – –

1.2 2.3 3.4 – – – – –

504.9 3.7 3.1 2.3 – – – –

1.2 2.2 3.2 4.2 – – – –

60– 4.3 3.7 3.1 2.2 – – –

– 2.1 3.0 3.9 5.0 – – –

70– 4.8 4.3 3.6 3.1 2.1 – –

– 2.0 2.9 3.8 4.8 5.9 – –

80– 5.3 4.9 4.2 3.7 3.1 2.2 –

– 1.9 2.7 3.6 4.6 5.6 6.7 –

90– – 5.4 4.9 4.3 3.6 3.1 –

– – 2.6 3.5 4.4 5.4 6.5 –

100– – 5.8 5.3 4.8 4.3 3.7 3.1

– – 2.5 3.3 4.3 5.3 5.9 7.3


WaterPressure


Air Pressure*

10 20 30 40 50 60 70 80

20†3.3 1.8 – – – – – –

1.3 2.4 – – – – – –

304.3 3.4 2.1 – – – – –

1.1 2.1 3.2 – – – – –

40– 4.5 3.6 2.4 – – – –

– 1.9 2.8 3.9 – – – –

50– 5.3 4.6 3.7 2.5 0.9 – –

– 1.8 2.7 3.6 4.7 5.9 – –

60– 6.1 5.4 4.7 3.8 2.8 1.3 –

– 1.7 2.5 3.4 4.4 5.4 6.7 –

70– – 6.2 5.5 4.8 4.0 3.0 1.7

– – 2.4 3.3 4.2 5.1 6.2 7.4

80– – 6.8 6.2 5.5 4.8 4.1 3.1

– – 2.3 3.2 4.1 5.0 5.9 7.0

90– – 7.4 6.9 6.3 5.6 5.0 4.3

– – 2.2 3.0 3.9 4.8 5.6 6.6

100– – 7.9 7.4 6.9 6.3 5.7 5.0

– – 2.1 2.9 3.8 4.6 5.5 6.4

1. Values in light gray show optimum evaporation under normal room conditions, when center line of spray is 5' (1.5 m) from the lower surface.

2. Values in dark gray can require up to 10' (3 m) for evaporation. Other values may be used where extended heat, higher air velocity exist or where slight surface wetting is permitted.

†For applications with liquid pressures below 30 psi (2 bar), request end cap sub-assembly 21950-20-NYB.

In each line, figures in plain face indicate water atomized in gph (l/h) at psi (bar) water pressure.

Figures in boldface indicate atomizing air in scfm (Nl/min) at psi (bar) air pressure.

AirJet Fogger has a horizontal throwing distance of 15' (4.5 m) and will expand to approximately 8' (2.4 m) wide/3' (.9 m) thick.

PERFORMANCE DATA 23412, QJ25655 *At the stated pressure in psi.




D R I P S A F E A I R J E T ® F O G G E R S P R AY N O Z Z L E S

SPECIAL PURPOSE

AIR ATOMIZING

Nozzle InletConn.(in.)

AirJet FoggerType

Fluid OrificeNo.

OrificeDia. Nom.

(in.)

1/4 45265

16.0 .016

20 .020

26 .026

To Clamp OnPipe Size

(in.)

AirJet FoggerType

Fluid OrificeNo.

OrificeDia. Nom.

(in.)

1/2

45269

16.0 .016

3/4 20 .020

1 26 .026

SPECIFICATIONS


• High-volume/high-efficiency air atomization

• Produces an adjustable, high-quality dry fog without wetting with pressure-fed liquid

• Ideal for large/open structures and areas with high air exchange rates

• Operation is through a drip safe air-actuated liquid shut-off valve

• Automatically prevents liquid from spraying until air pressure at the nozzle is sufficient for fine atomization

• Drip safe valve simplifies system construction and control while improving performance

• Operates using normal water pressures found in municipal water systems, eliminating the need for expensive, high-pressure hydraulic pumps

• Air requirements are met using an air compressor with a capacity range that is suitable for the application

• Requires minimal maintenance

• The flat spray tip has a large orifice that reduces clogging

• Spray set-up and built-in strainer are quickly removed by hand if cleaning is required

• Spray tip is brass; valve and body polymer

• Operates at pressures up to 100 psi (7 bar) with a minimum air pressure range of 25 to 35 psi (1.7 to 2.5 bar)

• A split-eyelet or saddle clamp version of the AirJet Fogger (45269 Series) is also available for quick and easy mounting to the liquid supply pipe

45265 1/4" NPT or BSPT (F)

45269 Split-eyelet type to clamp on pipe 1/2" to 1"



D R I P S A F E A I R J E T ® F O G G E R S P R AY N O Z Z L E S

SPECIAL PURPOSE

AIR ATOMIZING


WaterPressure


Air Pressure*

10 20 30 40 50 60 70 80

203.3 1.8 – – – – – –

1.3 2.4 – – – – – –

304.3 3.4 2.1 – – – – –

1.1 2.1 3.2 – – – – –

40– 4.5 3.6 2.4 – – – –

– 1.9 2.8 3.9 – – – –


WaterPressure


Air Pressure*

10 20 30 40 50 60 70 80

203.1 1.7 – – – – – –

1.4 2.8 – – – – – –

303.6 2.1 1.7 – – – – –

1.3 2.5 3.6 – – – – –

404.3 3.1 2.2 – – – – –

1.2 2.3 3.4 – – – – –


WaterPressure


Air Pressure*

10 20 30 40 50 60 70 80

201.2 1.1 – – – – – –

1.5 2.5 – – – – – –

301.7 1.5 1.2 – – – – –

1.4 2.4 3.4 – – – – –

402.0 1.7 1.5 1.4 – – – –

1.4 2.4 3.3 4.2 – – – –

In each line, figures in plain face indicate water atomized in gph (l/h) at psi (bar) water pressure.Figures in boldface indicate atomizing air in scfm (Nl/min) at psi (bar) air pressure.

1. Values in light gray show optimum evaporation under normal room conditions, when center line of spray is 5' (1.5 m) from the lower surface.

2. Values in dark gray can require up to 10' (3 m) for evaporation. Other values may be used where extended heat, higher air velocity exist or where slight surface wetting is permitted.

3. AirJet Fogger has a horizontal throwing distance of 15' (4.5 m) and will expand to approximately 8' (2.4 m) wide/3' (.9 m) thick.

PERFORMANCE DATA 45265, 45269 *At the stated pressure in psi.


ORDERING INFO




Fluid Orifice

Dia. 16




Fluid Orifice

Dia. 16

BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.



H U M I D I F I C AT I O N S P R AY N O Z Z L E S A N D U N I T S

SPECIAL PURPOSE

AIR ATOMIZING


• All equipment supplied for humidification systems except piping and wiring

• 1/4JH siphon air atomizing nozzles provide automatic, efficient humidity control with low installation and operating costs

– Nozzles operate either with compressed air drawing water from the float box by siphon action, or with water being delivered to the nozzle under pressure

– Produces a fine atomized spray for rapid evaporation and efficient humidification

– For information on siphon set-ups, see pages B24 to B59

• 1/4JT pressure-fed air atomizing nozzles provide automatic, efficient humidity control with low installation and operating costs

– Suitable for use in systems where water is under pressure

– Have built-in strainers for air and water plus a ball check valve in the water line

– Produces a fine atomized spray for rapid evaporation and efficient humidification

– For information on pressure set-ups, see pages B6 to B49

• 45400 humidification unit is a self-contained humidifier suitable for use with deionized water (DI)

– Easy to install on a wall or for use in non-ducted applications

– Air regulator and gauge, 24VDC air control solenoid and air line filter are included within the Humidification Unit

– Wall-mounting bracket is also provided

– 9.7 lbs. (4.4 kg)

– For each spray set-up, water capacity ranges from 2.7 lbs/hr at 10 psi (0.7 bar) air to 6.5 lbs/hr at 60 psi (4 bar) air

1/4JH Siphon inlet connection

1/4" NPT and BSPT inlets

1/4JTPressure-fed inlet connection

1/4" NPT and BSPT inlets

45400 1/4" NPT or BSPT (F)

A BC D

E

F

J

G

I

H

OVERVIEW – TYPICAL HUMIDIFYING SET-UPS FOR SIPHON NOZZLES

Typical humidifying set-ups for siphon nozzlesA – Float box with

float valveB – Liquid strainerC – Air atomizing nozzleD – Spray pipe

assemblyE – Pipe hanger

F – Air filterG – Pressure regulator

with gaugeH – Solenoid valveI – Switching relayJ – Humidistat



SPECIAL PURPOSE

AIR ATOMIZING


• YMF MiniFogger® III is ideal for humidification applications with limited space due to its compact design

– Available with a choice of one to four stainless steel spray nozzle set-ups with a wide variety of flow-rate sizes/droplet sizes and types

– For each spray set-up, water capacity is 0.26 to 1.19 gph (1.0 to 4.5 l/h) and air capacity is 30 to 35 nl/min at 43.5 psi (3.0 bar)

– Can be placed in hard-to-reach spaces and can be easily installed on a header, on a wall or on a ceiling

– 0.46 lbs. (210 g) for single spray set-up type; 0.55 lbs. (250 g) for multiple four set-up types

– Height is 4.53" (115 mm)

– The body, retainer cap and tank are made of corrosion-resistant polypropylene with stainless steel air and water connections

– Materials are also compatible with deionized water

• 46215-008 provides a finely atomized spray without the use of compressed air

– Produces a hollow cone spray pattern

– Requires a minimum liquid pressure of 450 psi (31 bar) to the nozzle

– Maximum operating pressure of 1000 psi (69 bar)

YMF MiniFogger III

1/4" NPT or BSPT (F) air and liquid inlet connection

46215-008 1/8" NPT or BSPT (M)

Set-up No. Orifice Diameter(in.)

Data per Nozzle (Air Pressure 0.3 MPa)

Liquid Capacitygph

Air Capacityscfm

Mean Droplet Size(micron)*

Spray Distance(ft.)

SU2.5N 0.02 .66 1.2 8.5 8.8

*Sauter Mean Diameter 0.1 MPa = 1 bar

PERFORMANCE DATA YMF MINIFOGGER III

Atomizing Air Water Capacity

Air Press.psi

Air Capacityscfm gph

10 .38 .32

20 .57 .42

30 .74 .52

40 .92 .62

50 1.10 .71

60 1.30 .78

Pressurepsi

Liquid Capacitygph

500 .94

600 1.0

700 1.1

800 1.2

900 1.25

1000 1.3

PERFORMANCE DATA 45400

PERFORMANCE DATA 46215-008



SPECIAL PURPOSE

AIR ATOMIZING

MATERIALS

YMF MINIFOGGER III SPRAY NOZZLE

Example

– –Humidification

Unit Type YMF-3No. of

Set-ups 4

45400 HUMIDIFICATION UNIT

Example

– –Humidification

Unit Type 45400No. of

Set-ups 1

46215-008 SPRAY NOZZLE

Example

Nozzle Type46215-008

ORDERING INFO

1/4JH AND 1/4JT COMPLETE NOZZLE ASSEMBLY

ExampleInlet

Conn.Nozzle Body


Spray Set-up

No.

Material Code 1/4 JH SS– –+ SU1A SS


BSPT connections require the addition of a “B” prior to the nozzle body inlet connection. To order spray set-up only, use spray set-up number and material code: SU1A-SS. To order fluid cap only, use fluid cap number (shown in performance data charts) and material code: 1650-SS. To order air cap only, use air cap number (shown in performance data charts) and material code: 64-SS. To order spray nozzle without set-up, use inlet connection, nozzle body and material code: 1/4JH-SS.




Nozzle Type

JH JT 45400 YMF 46215

Nozzle Bodies

Brass (none) l

Nickel-plated Brass (none) l l

Kynar® KY l



Nozzle Type

JH JT 45400 YMF 46215

Air/Fluid Caps

Nickel-plated Brass SSBR l l

Nickel-plated Brass Air Cap and303 Stainless Steel Fluid Cap SSBR l l

Kynar KY l


PTFE TEF l


A C C E S S O R I E S AIR ATOMIZING


Pressure tank assembly

2202 Pipe Hanger

• Used for proper spacing between air and liq-uid lines. Sizes fit 1/2" piping

• Hanger is held by threaded rod and nuts (not included) for vertical adjustment

• Made of cast aluminum. 4" (10 cm) spacing

• Use with 2335-SE spray pipe assembly

55089 Electric Humidistat

• Quick relative humidity LCD readouts from 1% to 99% with repeatability of ±5%

• Operating temperature range 32°F to 160°F (0°C to 71°C)

• 24V (DC or AC)

22140 Pressure Tank Assembly

• Meets ASME® Boiler and Pressure Vessel Code requirements and OSHA safety regulations

• Constructed of 304 Stainless Steel

• Assembly includes a pressure regula-tor with gauge, ASME coded pressure relief valve, air bleed valve and plug valves for air inlet and liquid outlet

• Tanks are available in 1, 2, 5, 10 and 16 gallon (3.8, 7.6, 18.9, 38 and 61 liter) capacities

• The air inlet and liquid outlet have 1/4" NPT (F) connections

• The maximum working pressure is 140 psi at 100°F (9.5 bar at 38°C)

• The 22140 features brass fittings and an EPR lid seal

38180 Split-eyelet Swivel Union

• Simplifies installation and maintenance of air atomizing nozzles and spray guns

• Connector design reduces costs by elimi-nating cutting, threading, welding and brazing operations and adjustment of fittings, unions and nipples

• Recommended pressure is up to 250 psi (17 bar) for liquid and air lines

• Fits 1/2", 3/4" or 1" pipe or similar O.D. tube. 1/4" NPT or BSPT (M) outlet pipe connections

• Nickel-plated brass with zinc-plated pipe clamps or all stainless steel construction


Pipe hanger

Electric humidistat

Split-eyelet swivel union


A C C E S S O R I E SAIR ATOMIZING


39272 Tank Heater Bands

• Provide anywhere from 6°F to 60°F (3°C to 33°C) heat gain depending upon the tank size and number of bands used

• Silicone rubber construction with fiberglass mesh reinforcement for added strength, flexibility and corrosion resistance

• Features quick-release band clasp and built-in thermostat for temperature control

• Two sizes fit 9" and 12" (288.6 and 304.8 mm) diameter tanks

38673 Push-in Tube Fittings

• Provide fast and easy hook-up of air atomizing nozzles

• Durable nickel-plated brass con-struction includes Buna-N O-ring

• Select from six configurations with 1/8", 1/4" or 3/8" NPT (M) connections for 1/4", 3/8" and 1/2" O.D. tubing

45592 Ferrule-type Tube Fittings

• Intended for use when operating at higher pressures

• The 316 Stainless Steel is of durable con-struction and can be easily taken apart for cleaning

• Six configurations available with 1/8", 1/4" or 3/8" NPT connections for 1/4", 3/8" and 1/2" O.D. tubing

39273 and 39275 Level Switch Kit

• Indicates a low liquid level condi-tion inside the pressure tank

• Use standard 39273 level switch with 5 and 10 gallon (18 and 38 liter) pressure tank assem-blies with external 1/4" NPT (F) threads

• Use 39275 level switch with 1 and 2 gallon (4 and 8 liter) pres-sure tank assemblies with external 1/4" NPT (F) threads

• Features a U.L. listed float switch, quick disconnect and 12' (3 m) PVC jacketed cable

• Available in brass with Buna-N float or all stainless steel


Tube fittings

Tube fittings

Tank heater bands

Level switch kit

A U T O M A T I C S P R A Y N O Z Z L E S

COATING • DISPENSING • FOGGING

GAS COOLING • HUMIDIFICATION

L U B R I C AT I N G • M O I S T U R I Z I N G

MARKING • MISTING • ROBOTIC

APPLICATIONS • SEALING

C1

A U T O M AT I C N O Z Z L E S

I N T R O D U C T I O N

C2

OVERVIEWIf your application requires precise, automated control of intermittent spraying, you‘ll find dozens of product options in this section. Air- or electrically-actuated nozzles are available in a wide range of styles, capacities, cycling speeds and more.

Our automatic spray nozzles use the same spray set-ups as our air atomizing spray nozzles or our UniJet® nozzles. Once you‘ve determined which nozzle type is best for your application, please refer to the Air Atomizing section of this catalog or Hydraulic Nozzle Catalog 75 on spray.com for tip performance data.

To optimize the performance of automatic spray nozzles, consider adding an AutoJet Spray Controller.

With AutoJet spray control you can:

• Fine-tune timing to accurately spray moving targets and prevent dripping on nozzle actuation or shut-off

• Maximize cycle speed• Precisely control liquid pressure, atomizing air pressure

and fan air pressure to ensure proper flow rate, spray angle and drop size

• Establish automatic clean-out cycles to minimize nozzle plugging

• Easily program system set point parameters• Use Pulse Width Modulated (PWM) flow control

to vary the flow rate of electric spray nozzles at a fixed pressure

• Notify operators or shut down on specified faults• Integrate control of your spray application with

existing plant controlVisit spray.com for more information.

HOW PULSE WIDTH MODULATION (PWM) WORKS:

Pulse width modulated flow control involves switching an automatic spray nozzle on and off repeatedly at a controlled rate.

PWM provides distinct advantages:

• Easily and precisely control flow rate without adjusting spray pressure or affecting spray integrity

• Reduce misting by producing a larger drop size than typical for a given flow and pressure

• Decrease nozzle clogging by using a larger nozzle orifice while limiting flow rate

• Provide an extremely high flow turndown ratio at a single pressure

Spray is ON 50%

of the time

Spray is OFF 50%

of the time

Open

Closed

Time (Seconds)0 1 2 3

A U T O M A T I C N O Z Z L E S

TABLE OF CONTENTS

PRODUCT RANGE:

Automatic air atomizing spray nozzles

• Air-actuated air atomizing nozzles use compressed air and a pressurized or siphoned liquid to produce a wide variety of spray patterns and drop sizes. Models include our JAU, JJAU, 10530 and variable spray series

• Electrically-actuated air atomizing nozzles utilize an internal 24 VDC solenoid coil to directly drive a carbide ball tipped shut-off stem. Cycle speeds as high as 18,000 cycles per minute can be achieved. No compressed air is required. Models include our PulsaJet AA10000JJAU, AA28JJAU and AA29JAUCO series

Hydraulic automatic spray nozzles

• Air-actuated hydraulic nozzles use nozzle orifice geometry to precisely disperse and meter a pressurized liquid. Options include JJAUH, JAUH, AA22AUH and AA24AUA series

• Electrically-actuated hydraulic nozzles use an internal 24 VDC solenoid coil. Models include our PulsaJet AA10000AUH and AA26AUH series

C3

AIR ATOMIZING AUTOMATIC SPRAY NOZZLES – AIR-ACTUATED

1/4JAU SERIES NOZZLE ASSEMBLIESStandard Model, with Clean-Out Needle, with Single Air Line, with Auxiliary Shut-Off, with Knurled Head Screw Control, with Plate Mount, with Adjustable Atomizing with Plate Mount, Rod Mounting Kits C4

1/8JJAU SERIES NOZZLE ASSEMBLIESStandard Model, with 45° Adapter, with Two Cylinder Air Connections, Extensions C7

VARIABLE SPRAY SERIES NOZZLE ASSEMBLIESVMAU, with Back Plug, Mounting Kits C9

10530 SERIES NOZZLE ASSEMBLIESWith various size air, liquid and cylinder connections C10

AIR ATOMIZING AUTOMATIC SPRAY NOZZLES – ELECTRICALLY-ACTUATED

PULSAJET® AA10000JJAU C11

AA28JJAU SERIES NOZZLE ASSEMBLIES Standard AA28JJAU-49815, Chemical/Corrosion-Resistant AA28JJAU-50940 C12

AA29JAUCO SERIES WITH CLEAN-OUT NEEDLE C13

HYDRAULIC AUTOMATIC SPRAY NOZZLES – AIR-ACTUATED

JJAUH AND JAUH SERIES NOZZLE ASSEMBLIESStandard 1/8JJAUH, 1/4JAUH with 1/4" inlet connection and 1/8" air cylinder inlet connection C14

AA22AUH SERIES NOZZLE ASSEMBLIESStandard AA22AUH, with Stainless Steel Body and Cap, with Two Liquid Inlets, with Adjusting Screw, with Extension C15

AA24AUA SERIES NOZZLE ASSEMBLIESStandard AA24AUA, with Aluminum Body and End Cap, with Two Liquid Inlets, with Extension C17

HYDRAULIC AUTOMATIC SPRAY NOZZLES – ELECTRICALLY-ACTUATED

PULSAJET AA10000AUH SERIES C19

AA26AUH SERIES NOZZLE ASSEMBLIES Standard Model, with Extension C20

AUTOMATIC SPRAY NOZZLE ACCESSORIES

Electric Band Heater, 51120 Heat Jacket, Solenoid Valves, 38680 Quick Exhaust Valve C21

J A U S E R I E S

AIR ATOMIZING | AIR-ACTUATED

AUTOMATIC NOZZLES

C4 spray.com | 1.800.95.SPRAY


• Internal air cylinder for controlled on/off operation up to 180 cycles per minute

• On/off cycle interrupts only the liquid portion of the spray. (Liquid flow to the nozzle may be by siphon, gravity-feed or pressure-feed)

• Available in a wide variety of spray set-ups with unique Drip Free design for a complete selection of capacities and spray patterns

1/4JAU:

• Used with smaller capacity fluid caps

• 10880-1/4JAU is specified for use with spray set-ups containing fluid cap 80150DF or 100150DF

6218-1/4JAU:

• Single air line used both for spray atomization and for operation of the air cylinder

• Air line is regulated at the desired on/off cycle time causing simultaneous flow of atomizing air and liquid

• Operates up to 180 cycles per minute and requires a minimum air pressure of 30 psi (2 bar)

OVERVIEW – JAU SERIES

1/4JAU 1/4" NPT or BSPT (F)

air and liquid inlet connection1/8" NPT or BSPT (F)

air cylinder inlet connection

6218-1/4JAU 1/4” NPT or BSPT (F)with single air line

Spraying Systems Co.c

L

D

L

D

Drip-free seal

Liquid inlet NPT or BSPT (F)

Air inlet NPT or BSPT (F)

Shut-off needle hard drawn

stainless steel

Air-operated cylinder for instantaneous

retraction of shut-off needle to

start spraying

Return stroke stainless steel spring

for instantaneous shut-off

J A U S E R I E S


AUTOMATIC NOZZLES

C5spray.com | 1.800.95.SPRAY

6083-1/4JAU 1/4" NPT or BSPT (F)

auxiliary shut-off

7310-1/4JAU 1/4" NPT or BSPT (F) with

knurled head screw control

1/4JAUPM 1/4" NPT or BSPT

plate-mounted

19330-1/4JAUPM 1/4" NPT or BSPT adjustableatomizing air plate-mounted

28945-003 and 28945-004 Mounting Kits

1/8" NPT or BSPT (M)rod mounting kits


6083-1/4JAU:

• Auxiliary shut-off assembly allows temporary liquid shut-off of individual nozzles in a system

• Compact, precision nozzle has the unique Drip Free design and all the same operating features of the 6218-1/4JAU

7310-1/4JAU:

• Knurled head screw control permits manual nozzle shut-off without disturbing operation of other nozzles on a manifold

• Shares the same overall Drip Free design and operating features with the 1/4JAU

1/4JAUCO:

• Clean-out needle which cleans the fluid orifice with each on/off cycle of the nozzle

1/4JAUPM:

• Designed to meet special mounting applications and offers all the tested features and choice of Drip Free set-ups as the 1/4JAU spray nozzle

• For easy removal or replacement, the nozzle body is attached to the mounting plate by a single nut

• For quick and easy service of the nozzle without disturbing air and liquid line connections, all inlets are at the rear of the mounting plate

1/4JAUPMCO:

• Combines the features of both the nozzle body held in a mounting plate and a clean-out needle extension

6218-1/4JAUPM:

• Single air line used for spray atomization and for operation of the air cylinder



19330-1/4JAUPM:

• Set the precise adjustment of spray atomization with the regulating screw and then lock in the setting with the hex locknut

• In addition to infinite adjustability, offers the same choice of Drip Free spray set-ups as the 1/4JAU



Mounting Kits:

• Constructed of stainless steel with 1/2" (13 mm) diameter mounting holes

J A U S E R I E S


AUTOMATIC NOZZLES


MATERIALS


Nozzle Type

JAU

Nozzle Bodies:

Nickel-plated Brass (none) l

303 Stainless Steel SS l

Spray Set-Ups:

Nickel-plated Brass Air Cap and 303 Stainless SteelFluid Cap SSBR l




ExampleInlet

Conn.Nozzle Body


Spray Set-up

No.

Material Code 1/4 JAU SS– –+ SUE15A SS

*Includes retainer and gasket.BSPT connections require the addition of a “B” prior to the inlet connection. JAU Series nozzles use the same set-ups as 1/8J and 1/4J Series air atomizing nozzles. See Section B for information on how to order set-ups, fluid caps and air caps.


For performance data, see Section B: 1/8J and 1/4J Series

J J A U S E R I E S


AUTOMATIC NOZZLES



• Compact, precision nozzle• Internal air cylinder for controlled on/off operation up to

180 cycles per minute• The on/off cycle interrupts only the liquid portion of the spray• Liquid flow to the nozzle may be by siphon, gravity-feed or

pressure-feed• Stainless steel return stroke spring results in instantaneous

shut-off and long life• Air operated cylinder is designed for instant retraction of shut-off

needle to start spraying• Available in a wide variety of spray set-ups that allow a variety of

capacities and spray patterns1/8JJAU:• Compact with the operating features of the JAU series • Designed for use in small areas• A minimum pressure of 30 psi (2 bar) for air cylinder operation and

a maximum liquid pressure of 125 psi (9 bar) recommended• Incorporates Drip Free design set-ups for complete shut-off16883-1/8JJAU:• Compact with a single inlet for both atomizing and cylinder air• Designed to spray at a 45° angle to the nozzle inlet axis38499-1/8JJAU:• Compact with the operating features of the JJAU series• Uses all 1/4J spray set-ups for ultimate adaptability• Two cylinder air connections allow ganging units and

simplify hookups• A minimum of 30 psi (2 bar) for air cylinder operation and a

maximum liquid pressure of 125 psi (9 bar) recommendedExtension 17690-1/8JJAU:• Spray set-up extension attached to the stainless steel

nozzle assembly• Extensions are available in 3", 6", 9", 12" and 18" (8, 15, 23, 30

and 46 cm) lengths. Other lengths available by request

Drip Free seal

Liquid inletNPT or BSPT (F)

Shut-off needlehard drawn

stainless steel

Return stroke springstainless steel spring for

instantaneous shut-off

Air inletNPT or BSPT (F)

Air operated cylinderfor instantaneous

retraction of shut-off needle to start spraying

OVERVIEW – JJAU SERIES

1/8JJAU 1/8" NPT or BSPT (F) air and

liquid inlet connection

16883-1/8JJAU 1/8" NPT or BSPT (F) air

and liquid inlet connectionwith 45° adapter

38499-1/8JJAU 1/8" NPT or BSPT (F) air and

liquid inlet connection

Extension 17690-1/8JJAU

3" to 18" (8 cm to 46 cm) lengths

J J A U S E R I E S


AUTOMATIC NOZZLES




ExampleInlet

Conn.Nozzle Body


Spray Set-up

No.

Material Code 1/8 JJAU SS– –+ SUJ12A SS

*Includes retainer and gasket.BSPT connections require the addition of a “B” prior to the inlet connection. JJAU Series nozzles use the same set-ups as 1/8JJ Series air atomizing nozzles. See Section B for information on how to order set-ups, fluid caps and air caps.


MATERIALS


Nozzle Type

JJAU

Nozzle Bodies:

Nickel-plated Brass (none) l


Spray Set-Ups:

Nickel-plated Brass Air Cap and303 Stainless Steel Fluid Cap SSBR l


For performance data, see Section B: 1/8JJ Compact Series.

VA R I A B L E S P R AY S E R I E S


AUTOMATIC NOZZLES


VMAU 1/4" NPT or BSPT or sanitary flange

1/4VMAA Back plug version for applications

that do not require an actuator

Mounting Kits

MATERIALS


Nozzle Type

VMAU VMAA


316 Stainless Steel 316SS l l


• Provide uniform spray distribution even when spraying viscous liquids

• Independent control of liquid, atomizing air and fan air pressures is possible for fine-tuning of flow rate, drop size, spray distribution and coverage

• Patent pending modular body and threadless fluid cap design

• Easy access dramatically cuts cleaning and maintenance downtime and requires no tools for disassembly

• Independent air atomizing line can be adjusted to vary spray drop size without affecting liquid flow rates

• Additional inlet/outlet port allows for liquid recirculation that effectively maintains the flow of viscous liquids

• VAU offers automatic operation with two actuator versions to choose from

• Built-in shut-off/clean-out needle is activated during each cycle to eliminate plugging

• O-ring sealed air cap on the fluid tip for positive alignment and sealing

• Anti-bearding set-ups available

• Variety of external mix spray set-ups available

• With the fan air in operation, a flat spray pattern is produced

• A round spray pattern is produced when the fan air is off

• 1/4" NPT, 1/4" BSPT and sanitary connections available

28945-001-316SS uses clampsto mount VMAU nozzles

28945-002-SS uses rodsto mount VMAU nozzles

For performance data, see Section B: VMAU and VAU Series.


Example

– –Body1/4VMAU

Material Code 316SS


BSPT connections require the addition of a “B” prior to the inlet connection. VMAU and VMAA Series nozzles use the same set-ups as VMAU and VAU Series air atomizing nozzles. See Section B for information on how to order set-ups, fluid caps and air caps.

1 0 5 3 0 S E R I E S


AUTOMATIC NOZZLES


10535-1/4J 1/4" NPT or BSPT (F)

air/liquid inlet connection1/8" NPT or BSPT

cylinder air connection

10536-1/2J 1/2" NPT or BSPT (F)

inlet connection1/4" NPT or BSPT (F)

cylinder air connection

10537-1J 1" NPT or BSPT (F) inlet connection


• Versatile and practical to meet a variety of liquid spray requirements

• Produces fine atomization by mixing air and liquid supplied at line pressures up to 125 psi (9 bar)

• Self-contained air cylinder provides controlled on/off operation at any desired frequency up to 180 cycles per minute

• Completely separate nozzle body and air cylinder assemblies require minimum maintenance and nozzle cleaning is fast and easy

• For high temperature applications, PTFE packing and gaskets in the nozzle withstand continuous use at temperatures up to 400°F (205°C). Air cylinder packing is recommended for temperatures up to 150°F (65°C)

10535-1/4J:

• Offers a wide range of capacities up to 72 gph (280 l/h) and a choice of round, wide angle round and flat spray patterns are available with either siphon or pressure Drip Free spray set-ups

10536-1/2J:

• Offers a wide range of capacities up to 306 gph (1158 l/h) and a choice of round, wide angle round and flat spray patterns are available with either siphon or pressure Drip Free spray set-ups

10537-1J:

• Offers a wide range of capacities up to 29 gpm (107 l/min) and a choice of round, wide angle round and flat spray patterns are available with either siphon or pressure Drip Free spray set-ups

MATERIALS


Nozzle Type

10535 10536 10537Nozzle Bodies:

Nickel-plated Brass (none) l l l


Spray Set-Ups:Nickel-plated Brass Air Cap and303 Stainless Steel Fluid Cap SSBR l l l


O-ring Material:

Viton®* (none)

PTFE TEF

FDA Viton VIFDA

Buna-N BU

Ethylene Propylene Rubber EPR

*Viton is the standard O-ring material.ORDERING INFORMATION


ExampleAssembly

No. 10535Inlet Conn 1/4

Spray Set-up

No. SU11DFNozzle Body J

Material Code SS

Material Code SS

O-ring Material Code** TEF– –– –– –– –

*Includes retainer and gasket.**Viton is the standard O-ring material.BSPT connections require the addition of a “B” prior to the inlet connection. 10535 Series nozzles use the same set-ups as 1/4J, 1/2J and 1J Series air atomizing nozzles. See Section B for information on how to order set-ups, fluid caps and air caps.


+ +

For performance data, see Section B: 1/4J, 1/2J and 1J Series.

P U L S A J E T ® A A 1 0 0 0 0 J J A U S E R I E S

AIR ATOMIZING | ELECTRICALLY-ACTUATED

AUTOMATIC NOZZLES



• Specifically designed for fast on-off operation

• Electronically activated air atomizing spray nozzle. Compact, lightweight design with liquid and electrical connections on back end, ideal for automatic or robotic applications

• Designed for use with the 2250 AutoJet® Spray Controller, but will work with any 24V power supply device

• Continuous duty or high speed cycling; up to 10,000 cycles per minute, when used with the 2250 AutoJet Spray Controller

• No packing or seals against moving parts to wear out

• Automatic air atomizing nozzles use the same set-ups as standard air atomizing nozzles

• Constructed of stainless steel, Ryton® and Peek™ for maximum chemical resistance, seals are Viton®

AA10000JJAU 1/8" NPT or BSPT (F)

air and liquid inlet connection electrically-actuated


Example

+ +Spray Set-upSUJ11

Retainer CapCP13981


+ +Model No.AA10000JJAU-VI

For performance data, see Section B: 1/8JJ Compact Series

BSPT connections require the addition of a “B” prior to the inlet connection. PulsaJet AA10000JJAU nozzles use the same set-ups as 1/8JJ Compact Series. See Section B for information on how to order set-ups, fluid caps and air caps.

A A 2 8 J J A U S E R I E S


AUTOMATIC NOZZLES



AA28JJAU-49815:

• Compact, high-speed, electrically-actuated, intermittent nozzle used primarily in applications where space is tight

• All connections are located at the rear of the gun to minimize nozzle profile

• The mounting and connections are not disturbed during maintenance because of a quick-change fluid module for replacing wear parts

• Can be used for continuous spraying or high-speed cycling

• Up to 2000 cycles per minute

• Maximum liquid pressure is 125 psi (9 bar) and maximum air pressure is 100 psi (7 bar)

• All fluid wetted parts are stainless steel, carbide, EPDM rubber or nylon for long life and efficient cleanup

• May be mounted in any position using a flat bracket or 5/16' (7.9 mm) diameter rod

• In-line, 45° or 75° spray direction fluid modules are available. Maximum fluid orifice is .028" (.71 mm)

AA28JJAU-50940:

• Same features as the in-line AA28JJAU-49815 and provides additional chemical and corrosion resistance

• Lightweight

• Celcon® outer body and housing with stainless steel 50945-fluid modules

AA28JJAU-46090:

• Same features as the in-line AA28JJAU but uses a soft shut-off seat design in the fluid cap to provide positive shut-off and a clean, accurate spray plus eliminates problems with needle-sticking common to many nozzles

• Available with a shut-off needle or clean-out needle

BSPT connections require the addition of a “B” prior to the inlet connection. AA28JJAU Series nozzles use the same set-ups as 1/8J and 1/4J Series air atomizing nozzles. See Section B for information on how to order set-ups, fluid caps and air caps.


Example

– –Nozzle BodyAA28JJAU-1/8

Spray Set-up SUJ11


AA28JJAU-49815 1/8" NPT or BSPT (F)

air and liquid inlet connectionelectrically-actuated

AA28JJAU-50940 1/8" NPT or BSPT (F)

air and liquid inlet connectionelectrically-actuated

For performance data, see Section B: 1/8J and 1/4J Series.

A A 2 9 J A U C O S E R I E S


AUTOMATIC NOZZLES



• Electrically operated air atomizing spray nozzle

• Clean-out needle standard for all fluid cap sizes

• Designed for use with threadless 1/4J fluid caps

• Use with all standard 1/4J air caps

• Mounts to flat surface or bracket

• Wetted parts are constructed of stainless steel, Ryton®, PTFE and PEEK™ for maximum chemical resistance. Seals are Viton®

• Maximum operating pressure: 60 psi (4.1 bar) liquid, 100 psi (6.9 bar) air

• Maximum flow rate: 0.8 gpm (3.0 l/m) at 20 psi (1.4 bar)

• Maximum fluid operating temperature: 150°F (66°C)


Example

+ +Inlet Conn.1/4

Threadless, Drip Free

Set-up No. SUE18DF-T


– –Model No.AA29JAUCO

AA29JAUCO 1/4" NPT or BSPT

air and liquid inlet connections

For performance data, see Section B: 1/8J and 1/4J Series.

BSPT connections require the addition of a “B” prior to the inlet connection. AA29JAUCO nozzles use the same set-ups as 1/8J and 1/4J Series air atomizing nozzles. See Section B for information on how to order set-ups, fluid caps and air caps.

J J A U H A N D J A U H S E R I E S

HYDRAULIC | AIR-ACTUATED

AUTOMATIC NOZZLES


1/8JJAUH 1/8" NPT or BSPT (F)air and liquid inlets

Capacity: 0.3 gpm (1.1 l/min)

1/4JAUH 1/4" NPT or BSPT (F)

liquid inlet connection1/8" NPT or BSPT (F)

air cylinder inlet connectionCapacity: 0.8 gpm (3 l/min)


• Compact and designed for use with TPU Series spray tips for precise, automated control of intermittent spraying

• Minimum of 30 psi (2 bar) air pressure is required for operation

• Cycles per minute: 180

• Maximum fluid pressure: 125 psi (9 bar).

MATERIALS


Nozzle Type1/8JJAUH 1/4JAUH

Brass, Nickel-plated (none) l l


Other materials available upon request.

Air operated cylinderfor instantaneous

retraction of shut-off needle to start spraying

Liquid inlet1/8" NPT or BSPT (F)

Shut-off needlehard drawn

stainless steel

Return stroke springstainless steel spring

for instantaneousshut-off

Plug

OVERVIEW – JJAUH AND JAUH SERIES



BSPT connections require the addition of a “B” prior to the inlet connection. JJAUH Series nozzles use TPU Series spray tips. See Hydraulic Spray Nozzle Catalog 75 HYD.

ExampleInlet Conn 1/8

Nozzle Body JJAUH

Spray Angle 00

Tip Type TPU

Capacity Size 0050

Material Code SS

Material Code SS– –– –

NOZZLE BODY ONLY SPRAY TIP

+ +

ExampleInlet Conn 1/4

Nozzle Body JAUH

Spray Angle 80

Tip Type TPU

Capacity Size 03

Material Code SS

Material Code SS– –– –


+ +

For performance data, see the Hydraulic Spray Nozzle Catalog 75 HYD.

A A 2 2 A U H S E R I E S


AUTOMATIC NOZZLES


AA22AUH Fluid pressure: 600 psi (40 bar)

Capacity: 5 gpm (19 l/min)

AA22AUH-SS Maximum fluid pressure:

600 psi (40 bar)Capacity: 5 gpm (19 l/min)

AA22AUH-SS-11024 Maximum fluid pressure:

600 psi (40 bar)Capacity: 5 gpm (19 l/min)


• Provides a controlled intermittent liquid spray using only liquid pressure as the force for atomization

• An internal air cylinder automatically interrupts the liquid flow at any desired frequency up to 180 cycles per minute

• A minimum air pressure of 45 psi (3 bar) is required for the air cylinder. The nozzle operates at liquid pressures up to 600 psi (40 bar)

AA22AUH:

• 1/2" (12.7 mm) diameter mounting hole and locking screw for quick installation and positioning on a mounting bar

• Constructed of brass with nickel-plated external surfaces. Valve seat and packing are made of PTFE and the valve stem is made of stainless steel

• A variety of flat spray, hollow cone and full cone spray tips are available

AA22AUH-SS:

• Same as AA22AUH but have an inlet body and cap assembly of stainless steel

AA22AUH-SS-11024:

• Same as AA22AUH but has two liquid inlets that allow continuous recirculation of the sprayed liquid between the nozzle and the liquid supply

InterchangeableUniJet® tip

Stainlesssteel valve

stem

1/2" (12.7 mm) dia.mounting hole

Locking screw

Stainless steelspring – closes valve

Air cylinder – opens valve

Air inlet to air cylinder1/8" NPT or BSPT (F)

Liquid inlet1/4" NPS (M)

PTFE valve seat

OVERVIEW – AA22AUH SERIES



AUTOMATIC NOZZLES


MATERIALS


Nozzle Type

AA22AUH

Nozzle Bodies:

Nickel-plated Brass (none)


Packing Material:

PTFE TEF l


AA22AUH-SS-14799:

• Additional adjusting screw that can limit the stroke of the shut-off needle to control response time more precisely

• Requires minimum air pressure of 75 psi (5 bar)

• Stainless Steel Valve Seat

AA22AUH-7676:

• Same basic design as the AA22AUH but equipped with an extension in a choice of lengths

• Stainless steel valve stem extends throughout the length of the extension and the valve seat is directly behind the spray tip for instantaneous, drip-free control

• Operates at liquid pressures up to 250 psi (17 bar)

AA22AUH-SS-14799 Maximum fluid pressure: 800 psi (55 bar)

Capacity: 2 gpm (7.6 l/min)

AA22AUH-7676 Maximum pressure: 250 psi (17 bar)

Capacity: 2 gpm (7.6 l/min)




ExampleNozzle Body AA22AUH

Spray Angle 80

Tip Type TPU

Capacity Size 03


+ +

BSPT connections require the addition of a “B” prior to the inlet connection. AA22AUH Series nozzles use TPU Series spray tips. See Hydraulic Spray Nozzle Catalog 75 HYD.

A A 2 4 A U A S E R I E S


AUTOMATIC NOZZLES


Tungstencarbide

needle seat

Tungstencarbide

needle stem

Tungstencarbidespray tip

1/2" (12.7 mm)diameter

mounting hole

Liquid inlet1/4" NPS or BSPP (M)

Locking screw

Air inlet1/8" NPT or BSPT (F)

Steel spring –closes valve

Safetylockknob

Air cylinder – opens valve

OVERVIEW – AA24AUA SERIES

AA24AUA Maximum fluid pressure: 4000 psi (280 bar)


AA24AUA-20190 Maximum fluid pressure: 3000 psi (210 bar)



• Lightweight and produces a finely atomized, intermittent liquid spray using only the liquid pressure as the force for atomization

• Internal air cylinder automatically interrupts the liquid flow at any desired frequency up to 180 cycles per minute

• Minimum air pressure of 75 psi (5 bar) is required for the air cylinder

• The nozzle operates at liquid pressures up to 4000 psi (280 bar)

AA24AUA:

• 1/2" (12.7 mm) diameter mounting hole and locking screw for quick installation and easy positioning on a mounting bar

• Shut-off needle and valve seat are available in tungsten carbide or stainless steel

• Valve seat is located directly behind the spray tip for drip-free shut-off

• Rear knob locks the shut-off needle in place to prevent accidental discharge while changing spray tips

• The liquid inlet connection is available in the standard “down” position or one of seven other positions in intervals of 45°

AA24AUA-20190:

• Same as AA24AUA but has an aluminum support body and end cap which reduce the nozzle’s total weight to just 1-1/4 lbs. (0.6 kg)

• Operates at liquid pressures up to 3000 psi (210 bar) and requires a minimum air pressure of 42 psi (3 bar) for the air cylinder

A A 2 4 A U A S E R I E S


AUTOMATIC NOZZLES



MATERIALS


Nozzle Type

AA24AUA

Nozzle Bodies:

Nickel-plated Brass (none)


Packing Material:

PTFE TEF l


AA24AUA-8395:

• Same as AA24AUA but with two liquid inlets that allow continuous recirculation of the sprayed liquid between the nozzle and the liquid supply

AA24AUA-8980:

• Same as AA24AUA but equipped with an extension in a choice of lengths

• Valve stem extends throughout the length of the extension and the valve seat is directly behind the spray tip for instantaneous, drip-free control







ExampleNozzle Body AA24AUA

Extension Number 8980

Spray Angle 80

Tip Type TPU

Capacity Size 01

Length of

Extension 8Material

Code TC– –– –


+ +

BSPT connections require the addition of a “B” prior to the inlet connection. AA24AUA Series nozzles use TP Series spray tips. See Hydraulic Spray Nozzle Catalog 75 HYD.

P U L S A J E T ® A A 1 0 0 0 0 A U H S E R I E S

HYDRAULIC | ELECTRICALLY-ACTUATED

AUTOMATIC NOZZLES



• Provides clean and accurate atomized sprays and complete shut-off for high speed automatic applications

• Electrically activated hydraulic atomizing valve accurately controls flow rate

• Provides fast on/off operation• Using the AutoJet® Spray Controllers, the PulsaJet 10000 provides

Pulse Width Modulation (PWM) to adjust flow rate at a given spray pressure while maintaining spray pattern integrity. See page C2, for more information on the benefits of PWM

• Compact design eliminates the need for compressed air• Minimizes overspray in a wide range of applications• Uses standard UniJet® spray tips in a wide range of

spray capacities• Maximum pressure: 100 psi (7 bar) for all versionsAA10000AUH-03:• Use with standard UniJet spray tip capacities from the -015 size to

the -03 size• When paired with the 2250 AutoJet Spray Controller, capable of

operating up to 10,000 cycles per minuteAA10000AUH-10:• Use with standard UniJet spray tip capacities from the -03 size to


operating up to 5,000 cycles per minuteAA10000AUH-30:• Use with standard UniJet spray tip capacities from the -10 size to


operating up to 2,500 cycles per minute• Accessories 50935-SS mounting block for use with all units

AA10000AUH-03 1/8" NPT or BSPT inlet connection





ExampleNOZZLE BODY ONLY SPRAY TIP

Nozzle Body Capacity

Spray Angle

Tip Type

Capacity Size

Material Code–– + AA10000AUH 03 80TPU 01 SS–– +


BSPT connections require the addition of a “B” prior to the inlet connection. PulsaJet AA10000AUH Series nozzles use TPU Series spray tips. See Hydraulic Spray Nozzle Catalog 75 HYD.


HYDRAULIC | ELECTRICALLY-ACTUATED

AUTOMATIC NOZZLES



AA26AUH:

• High speed, high-pressure, airless electric spray nozzle

• Automatic spray nozzle for applications requiring an intermittent spray

• The liquid pressure alone provides an atomized spray

• The nozzle sprays up to 1000 cycles per minute

• Faster version is also available which sprays up to 1500 cycles per minute

• A removable fluid module contains all fluid handling parts and can be replaced without disturbing the mounting or electrical connections

• Wetted parts are made of stainless steel or tungsten carbide for maximum corrosion resistance

• Internal seal material is EPDM rubber. Other materials available on request

AA26AUH-24200A-2-1/2:

• Same as AA26AUH with 2-1/2" (63.5 mm) extension for interior can coating

• 22629 swivel nut branch tee (For AA26AUH only)

• 50935 mounting kit (For AA10000AUH only)

AA26AUH Cycles/minute: 1000Maximum pressure:2000 psi (138 bar)

Capacity: 1.1 gpm (4.2 l/min)24 VDC (1.65 A)

AA26AUH-24200A-2-1/2 Cycles/minute: 1500Maximum pressure:2000 psi (138 bar)

Capacity: 1.1 gpm (4.2 l/min)24 VDC (1.65 A)



Example

– –Model Number24200A

Extension Size2-1/2


– –Nozzle BodyAA26AUH

BSPT connections require the addition of a “B” prior to the inlet connection. AA26AUH Series nozzles use UniJet® Series spray tips. See Hydraulic Spray Nozzle Catalog 75 HYD.

A C C E S S O R I E S AUTOMATIC NOZZLES



51120 Heat Jacket:

• Keeps viscous fluids warm as they pass through air atomizing nozzles thus reducing clogging

• Provides uniform temperature control• Easy installation by slipping over the

nozzle and stays connected to heat source while the nozzle is removed for service

• Versions for VAU, VMAU, JAU and JJAU air atomizing nozzles

38680 Quick Exhaust Valve:

• Quick exhaust valve increases line exhaust to a full 1/4" port (Cv = 1.0)

• Air-actuated spray nozzles are quickly shut off without spitting, especially when the quick exhaust valve is mounted more than 3' (1 m) from the spray gun

Solenoid Valves:

• Designed for automatically operated systems requiring on/off flow

• Solenoid valves are normally closed and provide dependable service in both air and liquid lines within 40°F to 165°F (5°C to 75°C)

• 10 watt class “F” coils for continuous duty and UL/CSA approved. Ambient operating temperatures range from 15°F to 122°F (–10°C to 50°C). Coils rated for dual frequency operation suitable for international use. Coil is encapsulated in a molding compound to resist high humidity and fungus growth

• Enclosure can be rotated 360° and includes a 1/2" NPT connection

• Solenoid valve bodies are available in stainless steel or brass

• For high velocity flow, a stainless steel pilot orifice helps eliminate premature leaking and increases service life. Kel-F® or Viton® seals are molded into stainless steel floating bottom plungers

• Floating plungers automatically compensate for vibration, shock, wear and deformation providing a bubble-tight seal. Buna-N material is used with diaphragm valves

• The solenoid valves can be mounted in any position and are direct pipe mounted

• Additional bottom mounting is provided on 11438-20, -21 and -22 by two 10-24 tapped holes

• The valve action within these models is diaphragm, pilot-operated diaphragm or direct acting poppet

Electric Band Heater:

• Ensures easy and economical spraying of atomized viscous liquids

• Trouble-free atomization of hard-to-spray liquids such as wax, adhesives, starches and syrups ensures product and process quality and minimizes maintenance time caused by nozzle clogging

• Easily slips over the body of a VMAU variable automatic spray nozzle

• Heat is efficiently transferred to the band heater in seconds

• Even heating of the nozzle inlets, body and air cap assures a consistent liquid temperature and achieves optimal spray performance

• Easy removal and disassembly for cleaning saves on maintenance time

• Especially important when used in dirty environments

• Maximum operating temperature: 250°F (121°C)

• Fiberglass reinforced silicone rubber heat band

• Silicone insulated lead wires• Suitable for use with all VMAU variable

automatic nozzles in stand-alone and manifold configurations

1/4" NPT (F)

2-Way Solenoid Valve 11438

1/4" to 1"

3-Way Solenoid Valve 114381/4" to 3/8"


spray.com | 1.800.95.SPRAY

INDEX

i-1

TRADEMARK REGISTRATION AND OWNERSHIP

SPRAYING SYSTEMS CO.'S TRADEMARK USAGE

The following is a current list of Spraying Systems Co.'s trademarks registered in the United States. Some marks are registered in other countries as well.

AccuCoat®

AirJet®

AutoJet®

FullJet®

GunJet®

Minifogger®

SpiralJet®

SprayDry®

PanelSpray®

PulsaJet®

TankJet®

UniJet®

VeeJet®

WhirlJet®

WindJet®

REGISTERED TRADEMARK CREDITS

The following trademarks are registered to other entities in the US and may be registered in other countries as well.

AMPCO®

ANSI®

ASME®

ASTM®

Carpenter®

Celcon®

Cupro®

Hastelloy®

Inconel®

Kel-F®

Kynar®

Lucite®

Monel®

NEMA®

Peek™

Refrax®

Ryton®

Stellite®

Viton®

Spraying Systems Co. reserves the right to make changes in specifications or design of the products shown in the catalog or to add improvements at anytime without notice or obligation.


INDEX

i-2

(1) MODIFICATION OF TERMSSeller’s acceptance of any order is expressly subject to Buyer’s assent to each and all of the terms and conditions set forth below and Buyer’s assent to these terms and conditions shall be conclusively presumed from Buyer’s receipt of this document without prompt written objection thereto or from Buyer’s acceptance of all or any part of the goods ordered. No addition to or modification of said terms and conditions shall be binding upon Seller unless specifically agreed to by Seller in writing. If Buyers’ purchase order or other correspondence contains terms or conditions contrary to or in addition to the terms and conditions set forth below, acceptance of any order by Seller shall not be construed as assent to such contrary or additional terms and conditions or constitute a waiver by Seller of any of the terms and conditions.

(2) PRICEUnless otherwise specified: (a) all prices, quotations, shipments and deliveries by Seller are f.o.b. Sellers plant; (b) all base prices together with related extras and deductions, are subject to change without notice and all orders are accepted subject to Seller’s price in effect at the time of shipment; and (c) all transportation and other charges are for the account of Buyer, including all increase or decrease in such charges prior to shipment. Payment of said price shall be due at the remittance address shown on the Seller’s invoice 30 days after the date of Seller’s invoice. Interest will be charged at a rate of 1 to 1-1/2% per month on all balances outstanding more than 30 days after the date of the invoice.

(3) MINIMUM BILLINGThe minimum billing by the Seller for any order shall be $50.00.

(4) WARRANTIESSeller warrants that its products will conform to and perform in accordance with the products’ specifications. Seller warrants that the products do not infringe upon any copyright, patent or trademark. THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THOSE CONCERNING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

(5) LIMITATION ON LIABILITIESBecause of the difficulty of ascertaining and measuring damages hereunder, it is agreed that, except for claims for bodily injury, Seller’s liability to the Buyer or any third party, for any losses or damages, whether direct or otherwise, arising out of the purchase of product from Seller by Buyer shall not exceed the total amount billed and billable to the Buyer for the product hereunder. IN NO EVENT WILL SELLER BE LIABLE FOR ANY LOSS OF PROFITS OR OTHER SPECIAL OR CONSEQUENTIAL DAMAGES, EVEN IF SELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

(6) QUALITY ASSURANCESeller shall have no obligation to ensure that any goods purchased from Seller meet any special Buyer quality assurance specifications and/or other special Buyer requirements unless such specifications and/or other requirements are specifically set forth in Buyer's purchase order and expressly accepted by Seller. In the event that any such goods supplied by Seller in connection therewith, are applied to an end use without the appropriate specification and/or other requirement therefore having been set forth in Buyer’s purchase order and expressly accepted by Seller, Buyer shall indemnify and hold Seller harmless against any and all damages or claims for damages made by any person for any injury, fatal or nonfatal, to any person or for any damage to the property of any person incident to or arising out of such application.

(7) CLAIMSClaims respecting the condition of goods, compliance with specifications or any other matter affecting goods shipped to Buyer must be made promptly and, unless otherwise agreed to in writing by Seller, in no event later than one (1) year after receipt of the goods by Buyer. In no event shall any goods be returned, reworked or scrapped by Buyer without the express written authorization of Seller.

(8) DEFAULT IN PAYMENTIf Buyer fails to make payments on any contract between Buyer and Seller in accordance with Seller’s terms, Seller, in addition to any other remedies available to it, may at its option, (i) defer further shipments until such payments are made and satisfactory credit arrangements are re-established or (ii) cancel the unshipped balance of any order.

(9) TECHNICAL ASSISTANCEUnless otherwise expressly stated by Seller: (a) any technical advice provided by Seller with respect to the use of goods furnished to Buyer shall be without charge; (b) Seller assumes no obligation or liability for any such advice, or for any results occurring as a result of the application of such advice; and (c) Buyer shall have sole responsibility for selection and specification of the goods appropriate for the end use of such goods.

(10) CANCELLATION OF SPECIAL ORDERSSpecial Orders or goods specially manufactured for Buyer cannot be canceled or modified by Buyer, and releases cannot be held up by Buyer, after such goods are in process except with the express written consent of the Seller and subject to conditions then to be agreed upon which shall include, without limitation, protection of Seller against all loss.

(11) PATENTSThe Seller shall not be liable for any costs or damages incurred by the Buyer as a result of any suit or proceeding brought against Buyer so far as based on claims (a) that use of any product, or any part thereof, furnished hereunder, in combination with products not supplied by the Seller or (b) that a manufacturing or other process utilizing any product, or any part there of furnished hereunder, constitute either direct or contributory infringement of any patent of the United States. The Buyer shall hold the Seller harmless against any expense or loss resulting from infringement of patents or trademarks arising form compliance with Buyer’s designs or specifications or instructions.

(12) COMPLETE AGREEMENTThe terms and conditions set forth herein, together with any other documents incorporated herein by reference constitute the sole and entire agreement between Buyer and Seller with respect to any order superseding completely any oral or written communications. No additions to or variations from such terms and conditions whether contained in Buyer’s purchase order, any shipping release or elsewhere shall be binding upon Seller unless expressly agreed to in writing by Seller.

(13) GOVERNING LAWAll orders are accepted by Seller at its mailing address in Wheaton, Illinois, and shall be governed by and interpreted in accordance with the laws of the State of Illinois.

CUSTOMER RETURN POLICYWe recognize that at times it is necessary for our customers to return products for a variety of reasons...that returns are a normal part of an on-going business relationship. To make the process as straightforward and fair as possible, our policy is based upon the following:

• An error on our part: We’ll credit you for the product and shipping costs, up to one year from ship date.

• An error on your part: Standard products can be returned for full credit, freight prepaid, also up to one year from date of shipment. There is the normal restocking charge of 20%.

Returns are subject to inspection.

For quick handling and authorization of returns, contact your local sales office.

Spraying Systems Co. reserves the right to make changes in specifications or design of the products shown in the catalog or to add improvements at anytime without notice or obligation.

TERMS AND CONDITIONS OF SALE


INDEX

i-3

HOW TO ORDER

For your convenience, there are multiple ways to place an order: phone, fax and online

In North America Phone: 1.800.95.SPRAY | Fax: 1.888.95.SPRAY

Outside North America Phone: 1.630.665.5000 | Fax: 1.630.260.0842

Online ordering with a credit card is also available. Visit spray.com/ispray. You’ll find helpful selection tools and a Live Chat option for immediate assistance.

FINDING PRODUCTS

• Consult the Product Index on page i-4 if you know the name of the product

• Consult the Part Number Index on page i-7 if you have the part number. Part numbers are shown alphanumerically on page i-8

Selection assistance is also available by calling 1.800.95.SPRAY. Representatives in your local sales office will help you determine which products best meet your application requirements. (Call 1.630.665.5000 outside North America or visit spray.com to find information for the sales office in your area.)

Air atomizing nozzles require spray set-ups. Each set-up consists of an air cap and fluid cap. Some may also includeO-rings and retainer caps. Our automatic spray nozzles use the same spray set-ups as our air atomizing spray nozzles or our UniJet® nozzles. Once you‘ve determined which nozzle type is best for your application, please refer to the Air Atomizing section of this catalog or Hydraulic Nozzle Catalog 75 on spray.com for spray tip performance data.

In each product section, you’ll find ordering examples. Start by reviewing the example and then create the part number by indicating the inlet connection, material and capacity size.

1/4

Example

JN SS– + –Inlet

Conn.

Nozzle Body

Assembly Type

Material Code


Spray Set-up

No.SU11DF SS

1/4

Example

JAU SS– + –Inlet

Conn.Nozzle Body

Material Code


Spray Set-up

No.SUE15A SS

AA10000AUH

Example

03 80 01TPU SS– + –Nozzle Body Capacity Capacity

SizeTip

TypeMaterial

Code– –+ Spray Angle


INDEX

i-4

AIR ATOMIZING SPRAY NOZZLES

Basic Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B4, B5

1/8J & 1/4J SERIES

Nozzle Bodies/Nozzle Assemblies

1/4J, 1/8J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B6, B9

1/4JCO, 1/8JCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B6, B9

1/4JN, 1/8JN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B6, B9

11005-1/4J, 11005-1/8J . . . . . . . . . . . . . . . . . . . . . . . . . . . B6, B9

20470. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B8, B9

Back Connect: Models 1/8JBC, 1/4JBC . . . . . . . . . . . . . B7, B9

Cluster Type: Model 8650 . . . . . . . . . . . . . . . . . . . . . . . . . B8, B9

Miniature: Model 6552-1/8JAC . . . . . . . . . . . . . . . . . . . . B7, B9

Steam Jacket: Model 1/4JBCJ . . . . . . . . . . . . . . . . . . . . B7, B9

Swivel: Model 7545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B7, B9

Thick Walls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B8, B9

Thin Walls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B8, B9

Top Inlet: 1/8JAC, 1/8JACN, 1/4JAC, 1/4JACN, 1/8-2JAC . . . . . . . B7, B9

Twin Spray: Model 2J . . . . . . . . . . . . . . . . . . . . . . . . . . . . B8, B9

With Strainer: Models 1/4JF, 1/4JFN . . . . . . . . . . . . . . . B7, B9

1/8JJ COMPACT SERIES

Bodies

1/8JJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B22, B23

1/8JJCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B22, B23

1/8JJN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B22, B23

Pressure Spray Set-Ups, Internal Mix

360° Circular Spray . . . . . . . . . . . . . . . . . . . . . . . . . . . . B24, B25

Flat Spray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B26-B29

Round Spray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B24, B25

Wide Angle Round Spray . . . . . . . . . . . . . . . . . . . . . . . . . . . B26

High Capacity Spray Set-Ups, External Mix

High Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B28, B29

Siphon/Gravity-Fed Spray Set-Ups

Flat Spray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B31

Round Spray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B30

VARIABLE SPRAY NOZZLE SERIES

VAA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B32, B33

VAACO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B32, B33

VAAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B32, B33

VAANCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B33

VAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B32, B33, B37, B38

VAUPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B33

VMAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B32-B36

28945-001-316SS, 28945-002-SS Mounting Kits . . . . . . . . B33

Pressure Spray Set-Ups, External Mix . . . . . . . . . . . B34, B37

1/2J SERIES

Bodies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B39, B40

Nozzle Assemblies

1/2J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B39, B40

1/2JCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B39, B40

1/2JN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B39, B40

Back Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B39, B40

Steam Jacket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B39, B40

Thick Walls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B39, B40

Twin Spray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B39, B40

Pressure Spray Set-Ups Internal Mix

Flat Spray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B41

Round Spray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B41, B42

Wide Angle Round . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B41, B42

Pressure Spray Set-Ups External Mix

Flat Spray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B43


INDEX

i-5

1J SERIES

Bodies

1J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B44

1JN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B44

Pressure Spray Set-Ups, Internal Mix

Flat Spray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B46

Round . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B46

Wide Angle Round . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B45

Spray Set-Ups, External Mix

Flat Spray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B47

Siphon/Gravity-Fed Spray Set-Ups

Round Spray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B47

AIR ATOMIZING ACCESSORIES

2202. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B55

22140. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B55

55089. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B55

38180. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B55

38673. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B56

39272. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B56

45592. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B56

39273. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B56

39275. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B56

AIRJET® FOGGER SPRAY NOZZLES

23412. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B48, B49

QJ25655 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B48, B49

DRIPSAFE™ AIRJET FOGGER SPRAY NOZZLES

45265. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B50, B51

45269. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B50, B51

HUMIDIFICATION NOZZLES AND UNITS

1/4JH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B52, B54

1/4JT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B52, B54

45400. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B52, B53, B54

46215-008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B53, B54

YMF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B53, B54

AUTOMATIC SPRAY NOZZLES

AIR ATOMIZING AUTOMATIC NOZZLE ASSEMBLIES – AIR-ACTUATED

1/4JAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C4, C6

6218-1/4 JAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C4, C6

1/4JAUCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C5, C6

1/4JAUPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C5, C6

1/4JAUPMCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C5, C6

6083-1/4JAU Shut-Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . C5, C6

6218-1/4JAUPM Single Air Line . . . . . . . . . . . . . . . . . . . C5, C6

7310-1/4JAU Shut-Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . C5, C6

19330-1/4JAUPM Adjustment . . . . . . . . . . . . . . . . . . . . . C5, C6

28945-003 Mounting Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . C5, C6

28945-004 Mounting Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . C5, C6

1/8JJAU COMPACT AUTOMATIC AIR-ACTUATED NOZZLE ASSEMBLIES – AIR-ACTUATED

1/8JJAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C7, C8

16883-1/8JJAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C7, C8

38499-1/8JJAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C7, C8

17690-1/8JJAU Extension . . . . . . . . . . . . . . . . . . . . . . . . . C7, C8

VARIABLE SPRAY NOZZLE SERIES – AIR-ACTUATED

1/4VMAA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C9

28945-001-316SS, 28945-002-SS Mounting Kits . . . . . . . . . C9

VMAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C9


INDEX

i-6

10530 SERIES – AIR-ACTUATED

10535-1/4J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C10

10536-1/2J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C10

10537-1J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C10

AIR ATOMIZING AUTOMATIC NOZZLE ASSEMBLIES – ELECTRICALLY-ACTUATED

AA10000JJAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C11

AA28JJAU-49815, AA28JJAU-50940 and AA28JJAU-46090 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C12

AA29JAUCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C13

HYDRAULIC AUTOMATIC NOZZLE ASSEMBLIES – AIR-ACTUATED

1/4JAUH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C14

1/8JJAUH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C14

AA22AUH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C15, C16

AA22AUH-SS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C15, C16

AA22AUH-SS-11024 . . . . . . . . . . . . . . . . . . . . . . . . . . . . C15, C16

AA22AUH-SS-14799 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C16

AA22AUH-7676 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C16

AA24AUA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C17, C18

AA24AUA-20190 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C17, C18

AA24AUA-8395 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C18

AA24AUA-8980 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C18

HYDRAULIC AUTOMATIC NOZZLE ASSEMBLIES – ELECTRICALLY-ACTUATED

AA10000AUH-03 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C19

AA10000AUH-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C19

AA10000AUH-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C19

AA26AUH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20

AA26AUH-24200-2-1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20

AUTOMATIC SPRAY NOZZLE ACCESSORIES

38680 Quick Exhaust Valve . . . . . . . . . . . . . . . . . . . . . . . . . . C21

51120 Heat Jacket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C21

Electric Band Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C21

11438 Solenoid Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C21


INDEX

i-7

NUMERIC

1

1/2J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B39, B40

1/2JCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B39, B40

1/2JN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B39, B40

1/4J, 1/8J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B6, B9

1/4JAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B7, B9

1/4JACN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B7, B9

1/4JAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C4, C6

1/4JAUCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C5, C6

1/4JAUH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C14

1/4JAUPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C5, C6

1/4JAUPMCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C5, C6

1/4JBC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B7, B9

1/4JBCJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B7, B9

1/4JCO, 1/8JCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B6, B9

1/4JF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B7, B9

1/4JFN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B7, B9

1/4JH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B52, B54

1/4JN, 1/8JN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B6, B9

1/4JT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B52, B54

1/4VMAA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C9

1/8JAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B7, B9

1/8JACN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B7, B9

1/8JBC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B7, B9

1/8JJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B22, B23

1/8JJAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C7, C8

1/8JJAUH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C14

1/8JJCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B22, B23

1/8JJN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B22, B23

1/8-2JAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B7, B9

10535-1/2J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C10

10535-1/4J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C10

10537-1J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C10

11005-1/4J, 11005-1/8J . . . . . . . . . . . . . . . . . . . . . . . . . . . B6, B9

11438. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C21

16883-1/8JJAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C7, C8

17690-1/8JJAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C7, C8

19330-1/4JAUPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C5, C6

1J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B44

1JN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B44

2

2202. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B55

20470. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B8, B9

22140. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B55

23412. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B48, B49

28945-001-316SS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B33

28945-002-SS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B33

28945-003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C5, C6

28945-004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C5, C6

2J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B8, B9

3

360° Circular Spray . . . . . . . . . . . . . . . . . . . . . . . B24, B25, B41

38180. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B55

38499. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C7, C8

38673. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B56

38680. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C21

39272. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B56

39273. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B56

39275. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B56

INDEX BY PART NUMBER


INDEX

i-8

4

45265. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B50, B51

45269. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B50, B51

45400. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B52, B54

45592. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B56

46215-008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B53, B54

5

51120. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C21

55089. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B55

6

6083-1/4JAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C5, C6

6218-1/4JAUPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C4, C6

6552-1/8JAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B7, B9

7

7310-1/4JAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C5, C6

7545. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B7, B9

8

8650. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B8, B9

ALPHABETICAL

A

AA10000AUH-03 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C19

AA10000AUH-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C19

AA10000AUH-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C19

AA10000JJAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C11

AA22AUH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C15, C16

AA22AUH-7676 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C16

AA22AUH-SS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C15, C16

AA22AUH-SS-11024 . . . . . . . . . . . . . . . . . . . . . . . . . . . . C15, C16

AA22AUH-SS-14799 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C16

AA24AUA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C17

AA24AUA-20190 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C17, C18

AA24AUA-8395 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C18

AA24AUA-8980 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C18

AA26AUH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20

AA26AUH-24200-2-1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20

AA28JJAU-49815 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C12

AA28JJAU-50940 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C12

AA29JAUCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C13

Q

QJ25655 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B48, B49

V

VAA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B32, B33

VAACO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B32, B33

VAAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B32, B33

VAANCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B33

VAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B32, B33, B37, B38

VAUPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B33

VMAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B32-B36

VMAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C9

Y

YMF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B53, B54

INDEX BY PART NUMBER

THANK YOU FOR YOUR INTEREST IN OUR SPRAY PRODUCTS

SUPERIOR SPRAY. SERIOUS RESULTS.

Visit spray.com/results to see how we’ve helped others increase throughput, reduce water and chemical use, improve worker safety and more. This library of case studies includes details on how quickly customers recouped their investment in new spray equipment.

WE’RE LOOKING FORWARD TO HELPING YOU OPTIMIZE YOUR OPERATIONS INVOLVING

SPRAY TECHNOLOGY. HERE ARE JUST A FEW WAYS WE CAN ASSIST:

• You’ll find the most extensive line of high-quality air atomizing and automatic spray nozzles available in this catalog. However, if you don’t find exactly what you need, be sure to contact us. Our flexible manufacturing capabilities enable us to make products in additional sizes and materials quickly and efficiently. Special designs are also possible. Just tell us what you need

• Need a different type of spray solution? Or a spray product for a specific application? Visit spray.com to find additional cat-alogs on these product lines:

– Hydraulic Spray Nozzles including FullJet®, VeeJet®, WhirlJet®, SpiralJet® nozzles and more

– Spray System Controllers and Automated Spray Systems

– Handheld GunJet® Spray Guns

– WindJet® Air Products

– TankJet® Tank Cleaning Products

– SprayDry® Nozzles

– Pulp and Paper Spray Products

– Steel Industry Spray Products

• On-site tank cleaning evaluations, spray optimization programs, nozzle maintenance workshops and lunch and learn sessions are just a few of the many services we provide. It's easy to take advantage of these programs – just contact your local representative. You’ll find a spray expert nearby – we have hundreds of technical sales and service people in more than 90 sales offices around the world

• Need a device to deliver fluid to your nozzles? Talk to us about headers, manifolds, lances, injectors and more

These are just a few of the ways we can help you get the results you need from your spray systems; you’ll learn about others in the pages that follow. Please be sure to visit spray.com or contact us whenever you need assistance – we're here to serve you.

Thank you – we value your business!

North Avenue and Schmale Road, P.O. Box 7900, Wheaton, IL 60187-7901 USA

Tel: 1.800.95.SPRAY Intl. Tel: 1.630.665.5000 Fax: 1.888.95.SPRAY Intl. Fax: 1.630.260.0842 Email: [email protected]

www.spray.com

AIR ATOMIZING & AUTOMATIC S P R A Y N O Z Z L E S

1.800.95.SPRAY | spray.com

Catalog 75 AA-AUTO © 2013 Spraying Systems Co. All rights reserved. Full protection of law claimed under Universal Copyright and Berne Conventions and other applicable national and international laws.

SP

RA

YIN

G S

YS

TE

MS

CO

. C

AT

AL

OG

75

| AIR

AT

OM

IZIN

G &

AU

TO

MA

TIC

SP

RA

Y N

OZ

ZL

ES

spraying systems catalogue

Documents

spray spray

spray products superior

visit spray

spray expert

spray technology

hydraulic spray nozzles

spray systems youll

handheld spray guns