spm nozzles - incoe
TRANSCRIPT
SPM NozzlesAdvanced Melt Filtration
INCOE® CorporationGlobal Headquarters2850 High Meadow CircleAuburn Hills, MI 48326 USAT: +1 (248) 616-0220E: [email protected]
Technical Support:T: +1 (248) 556-7790E: [email protected] Service and SalesT: +1 (248) 556-7770E: [email protected]
▪ Reduces Mold Repairs
▪ Filters Out Impurities
▪ Saves On Material Loss
▪ Improves Part Quality
▪ Assists In Dispersion
Screen Pac Filters
SPM NozzlesAdvanced Melt Filtration
PRODUCTIVITY AND PERFORMANCEMolded part quality and superior gate cosmetics require minimal gate size. Any contamination in the molten plastic will easily plug the orifice of the gate and stop production, or yield unacceptable parts. SPM filter nozzles eliminate foreign particles allowing trouble-free processing and superior part quality.
Minimal pressure loss is achieved with INCOE’s unique design where the filter element contains tapered holes to block the flow of contaminants while allowing molten plastic flow at minimal pressure loss. This unrestricted flow through design feature is unmatched in the industry.
FMin Max Min Max Max
SPM 600 30 80 35 80 0,5 1,0 … 41 12,7 101,6 101,648 in 3/s
800 cm 3/s 75 lb/in2
5 bar
SPM 4000 30 64 35 80 0,5 1,0 … 41 12,7 177,6 114,3122 in 3/s
2000 cm 3/s 73 lb/in2
5 bar
SPM 6000 56 80 35 80 0,5 1,0 … 76 25,0 254,0 154,0122+ in 3/s
2000+ cm 3/s 73 lb/in2
5 bar
Flow Rate (Styrene 0.5mm screen)
Loss of pressure approx.
A B ØC ØD E G H K
INCOE® Global Headquarters | 2850 High Meadow Circle | Auburn Hills, MI 48326 USA | T: 248-616-0220 | E: [email protected] | www.incoe.com©2021 INCOE® 05/21
SIMPLE INSTALLATIONThe SPM filter assembly is easily mounted to the injection molding machine by removing the nozzle tip, installing the filter assembly in the barrel head, and then reinstalling the nozzle tip in the filter assembly.
SIMPLE MAINTENANCEForeign material is held back on the inside of the filter element while allowing molten plastic to easily flow to the outside of the element and on to the mold. When an increase in pressure is realized, the filter element can be cleaned while on the injection molding machine. After removing the nozzle tip, the filter element plug is accessible and easily removed with the use of a special tool provided. Contaminants are then simply purged out through the filter element.