Tungsten Carbide Aluminium Jacket Nozzle

Tungsten carbide nozzles have long been the traditional material selection for most general nozzle applications and where medium cutting abrasives like glass bead, steel shot & grits, or Copper slag are used.

These widely used, robust nozzles are the preferred choice of blast cleaning operators, as it has excellent durability & wear when using the hard abrasive.

Nozzle Size

NTL-450 1/4” Tungsten carbide Venturi No4

NO.5 NOZZLE BORE 1/4" / 8.0mm LENGTH- 5 1/4" /136mm AIR REQUIREMENT 150/170 CFM

NTL-550 5/16” Tung-sten carbide Venturi No5

NO.5 NOZZLE BORE 5/16" / 8.0mm LENGTH- 5 3/4" /147mm AIR REQUIREMENT 150/170 CFM

NTL-650 3/8” Tungsten carbide Venturi No6

NO.6 NOZZLE BORE 3/8" / 9.5mm LENGTH- 7" /180mm AIR REQUIREMENT 250/265 CFM

NTL-850 1/2” Tungsten Carbide Venturi No8

NO.8 NOZZLE BORE ½” / 12.5mm LENGTH- 9 1/4" /235mm AIR REQUIREMENT 350/425 CFM

Silicon Composite Nozzle

Silicon nozzles are probably the most popular alternative to tungsten carbide for blast nozzle applications. The low wear rate maintains the internal nozzle geometry and provides maximum blasting effectiveness, minimum compressor requirements and reduced downtime due to replacement.

Silicon is also about one fifth lighter than Tungsten Carbide, so it is an excellent choice to minimize operator fatigue and maximize productivity.

Nozzle Size

SCC-450 ¼” Silicon Composite Venturi Nozzle No4

NO.4 NOZZLE BORE 1/4" / 8.0mm LENGTH- 5 1/4" /136mm AIR REQUIREMENT 150/170 CFM

SCC-550 5/16” Silicon Composite Venturi Nozzle No5

NO.5 NOZZLE BORE 5/16" / 8.0mm LENGTH- 5 3/4" /147mm AIR REQUIREMENT 150/170 CFM

SCC-650 3/8” Silicon Composite Venturi Nozzle No6

NO.6 NOZZLE BORE 3/8" / 9.5mm LENGTH- 7" /180mm AIR REQUIREMENT 250/265 CFM

SCC-750 7/16” Silicon Composite Venturi Nozzle No7

NO.7 NOZZLE BORE 7/16” / 11.0mm LENGTH- 8” /200mm AIR REQUIREMENT 350/375 CFM

Boron Carbide Nozzle

The Boron carbide blast nozzle offer a longest life with optimum air and abrasive use. Boron Carbide blasting nozzles offer the greatest resistance to nozzle wear.

Its weight is similar to Silicon Carbide and is much lighter than Tungsten Carbide. Boron Carbide is a far superior .

Nozzle Size

Boron Carbide Nozzle 550

NO.5 NOZZLE BORE 5/16" / 8.0mm LENGTH- 5 3/4" /147mm AIR REQUIREMENT 150/170 CFM

Boron Carbide Nozzle 650

NO.6 NOZZLE BORE 3/8" / 9.5mm LENGTH- 7" /180mm AIR REQUIREMENT 250/265 CFM

Boron Alloy Nozzle

Boron Alloy cast flanged blast nozzles is used for those short lasting contract jobs or for the part time Blaster

It has to be held in place by a lightweight Retaining Nut to Secure the Nozzle in place

Suits all standard coarse Thread 1" and 1 1/4" Nozzle holder.

Nozzle Size

BANF—550 Boron Alloy Nozzle

Thread 1" and 1 1/4" Nozzle holder.

BANF—650 Boron Alloy Nozzle

Thread 1" and 1 1/4" Nozzle holder.

BANF—750 Boron Alloy Nozzle

Thread 1" and 1 1/4" Nozzle holder.