solenoid safety valves bh, bf - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2....

35
1 Solenoid safety valves BH, BF - series (aluminium body) Field of application Solenoid safety gas valves are applied in remote control systems of various gas media, including hydrocarbon gases, gas phases of liquified gases, compressed air and other non- aggressive gases, as well as liquid non-aggressive mediums, with a viscosity up to 40 cSt. Solenoid valves perform the function of safety shut-off and control device for continuous operating in various pipeline systems. 1. В — series 2. Initial position: Н — normally closed F — normally open 3. Connection size, inches 4. Type: Н — 2-position solenoid valve В — 3-position solenoid valve С — for liquid medium М — with electric power drive P — with manual start-up function (mechanical type) Pm — with manual start-up function (electric type) Т — with slow opening mode 5. Nominal pressure range, bar 6. Options: К — equipped with manual gas flow regulator P — equipped with position indicator (open/closed) Е — explosion proof version Y — angle body version 7. Power supply voltage, V 8. AC frequency, Hz 9. Climatic version 10. Technical conditions number Technical data Power supply voltage, V DC 220, 110, 24, 12*; 50 Hz AC 220, 110, 24, 12* * for solenoid coils up to 25 W Opening/closing time, sec, max 1 Class of leak-tightness A Isolation class F Degree of protection IP65, IP67 (for explosion proof version) Environment temperature, °C –30...+40 –45...+40 –60...+40 (under cover) –60...+40 (outdoor conditions - only for explosion proof version) Code structure 1 2 3 4 5 6 7 8 9 10 В Н З Н 0,5 К 220V 50Hz У3.1 ТУ РБ 05708554.021-96

Upload: others

Post on 21-Sep-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

1

Solenoid safety valves BH, BF - series (aluminium body)

Field of applicationSolenoid safety gas valves are applied in remote control systems of various gas media,

including hydrocarbon gases, gas phases of liquified gases, compressed air and other non-aggressive gases, as well as liquid non-aggressive mediums, with a viscosity up to 40 cSt. Solenoid valves perform the function of safety shut-off and control device for continuous operating in various pipeline systems.

1. В — series2. Initial position: Н — normally closed F — normally open3. Connection size, inches4. Type: Н — 2-position solenoid valve В — 3-position solenoid valve С — for liquid medium М — with electric power drive P — with manual start-up function (mechanical type) Pm — with manual start-up function (electric type) Т — with slow opening mode5. Nominal pressure range, bar6. Options: К — equipped with manual gas flow regulator P — equipped with position indicator (open/closed) Е — explosion proof version Y — angle body version7. Power supply voltage, V8. AC frequency, Hz9. Climatic version10. Technical conditions number

Technical dataPower supply voltage, V DC 220, 110, 24, 12*; 50 Hz AC 220, 110, 24, 12* * for solenoid coils up to 25 WOpening/closing time, sec, max 1Class of leak-tightness AIsolation class FDegree of protection IP65, IP67 (for explosion proof version)Environment temperature, °C –30...+40 –45...+40 –60...+40 (under cover)

–60...+40 (outdoor conditions - only for explosion proof version)

Code structure1 2 3 4 5 6 7 8 9 10

В Н З Н 0,5 К 220V 50Hz У3.1 ТУРБ05708554.021-96

Page 2: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

2

Solenoid safety valves BH, BF - series (aluminium body)

Notes: 1. For the valves ВН½-..., ВН¾-..., ВН1-..., ВН1¼-..., ВН1½-..., ВН2-... type of connection should be indicated:

thread or flanged connection.

Order example of 2-position normally closed solenoid valve, nominal diameter DN50, flanged connection, max. operating pressure 1 bar, equipped with position indicator, power supply voltage 24 V DC, climatic version –45...+40:

ВН2Н-1Pfl.,24VDC,–45...+40

2. Solenoid gas valves in aluminium body are equipped with inlet filter built in.3. Solenoid safety valves are produced in power saving version. The valves are equipped with power control

board which allows to reduce the energy consumption up to 50% of the initial in 10 sec after the valve is switched on.4. The solenoid valves are equipped with PN 6. The solenoid valves DN 32...100 can be also produced with PN

16 flanges (should be specified at the order).5. Each valve housing has threaded orifices Rp(G)¼‘’ for connection of pressure switches, manometers, gauge

lines and other devices. The orifices are closed with plugs initially.

Page 3: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

3

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on.All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

2-position solenoid valves threadconnection(DN15...25)

№p/p Characteristics

Normally open Normally closed For liquid medium

BF½

Н–4

BF½

Н–6

BF¾

Н–4

BF¾

Н–6

BF1Н–4

BF1Н–6

BH½Н–0,2

BH½Н–4

BH½Н–4К

BH½Н–6

BH¾Н–0,2

BH¾Н–4

BH¾Н–4К

BH¾Н–6

BH1Н

–0,2

BH1Н

–4

BH1Н

–4К

BH1Н

–6

BH½С–4

BH¾С–4

BH1С

–4

1 Pressure range, bar 0...4 0...6 0...4 0...6 0...4 0...6 0...0,2 0...4 0...6 0...0,2 0...4 0...6 0...0,2 0...4 0...6 0...4

2 Nominal diameter (DN) 15 20 25 15 20 25 15 20 25

3 Thread diameter, inches ½ ¾ 1 ½ ¾ 1 ½ ¾ 1

4 Switching frequency, 1/hour, max 1000 300 1000 300 1000 300 500

5 Nominal capacity, W, max. (of one solenoid coil) 25 35

6 Weight, kg, max 2,0 2,3 1,9 2,1 1,9 2,1 2,1 2,3 2,6 2,8

7

Dimensions, mm., max.

а) Length 100 120 100 120 100 120

б) Width 68 80 68 80 65 75

в) Height 143 150 131 137 131 137 138 140 135 140

8 Number of solenoid coils, pcs. 1

9 Temperature of operation medium, ОС –30...+70

from 5 ОС above the freezing point

up to +90 ОС

10 Service time, switchings, no less than 1 000 000 500 000

11 Mounting position on horizontal and verlical pipelines

12 Resistance factor — 5,2 8,0 11,0 10,1 22,5 51,1

Page 4: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

4

2-position solenoid valves flangedconnection(DN15...25)

№p/p Characteristics

Normally open Normally closed

BF½

Н–4fl.

BF½

Н–6fl.

BF¾

Н–4fl.

BF¾

Н–6fl.

BF1Н–4fl.

BF1Н–6fl.

BH½Н–4fl.

BH½Н–4Кfl.

BH½Н–6fl.

BH¾Н–4fl.

BH¾Н–4Кfl.

BH¾Н–6fl.

BH1Н

–4fl.

BH1Н

–4Кfl.

BH1Н

–6fl.

1 Pressure range, bar 0...4 0...6 0...4 0...6 0...4 0...6 0...4 0...6 0...4 0...6 0...4 0...6

2 Nominal diameter (DN) 15 20 25 15 20 25

3Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.

55/12 65/12 75/11 55/12 65/12 75/11

4 Switching frequency, 1/hour, max 1000 300 1000 300 1000 300

5 Nominal capacity, W, max. (of one solenoid coil) 25

6 Weight, kg, max 2,5 2,8 2,4 3,5

7

Dimensions, mm., max.

а) Length 145 160 147 160

б) Width 83 83 95

в) Height 150 160 138 193

8 Number of solenoid coils, pcs. 1

9 Temperature of operation me-dium, ОС –30...+70

10 Service time, switchings, no less than 1 000 000

11 Mounting position on horizontal and verlical pipelines

12 Resistance factor — 2,9 6,6 6,2

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

Page 5: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

5

№p/p Characteristics

BH1¼

Н–1

BH1¼

Н–1К

BH1¼

Н–3

BH1¼

Н–3К

BH1¼

Н–6

BH1¼

Н–1fl.

BH1¼

Н–1Кfl.

BH1¼

Н–3fl.

BH1¼

Н–3Кfl.

BH1¼

Н–6fl.

BH1½

Н–1

BH1½

Н–1К

BH1½

Н–2

BH1½

Н–2К

BH1½

Н–3

BH1½

Н–3К

BH1½

Н–6

BH1½

Н–1fl.

BH1½

Н–1Кfl.

BH1½

Н–2fl.

BH1½

Н–2Кfl.

BH1½

Н–3fl.

BH1½

Н–3Кfl.

BH1½

Н–6fl.

BH2Н

–1

BH2Н

–1К

BH2Н

–2

BH2Н

–2К

BH2Н

–3

BH2Н

–3К

BH2Н

–6

1 Pressure range, bar 0...1 0...3 0...6 0...1 0...3 0...6 0...1 0...2 0...3 0...6 0...1 0...2 0...3 0...6 0...1 0...2 0...3 0...6

2 Nominal diameter (DN) 32 40 50

3 Thread diameter, inches 1¼ — 1½ — 2

4Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.

— 90/12,5 — 100/12,5 —

5 Switching frequency, 1/hour, max 1000 300 1000 300 1000 300 1000 300 1000 300

6 Nominal capacity, W, max. (of one solenoid coil) 25 35 25 35 25 35 40 25 35 40 25 35 40

7 Weight, kg, max 2,9 3,5 3,7 4,5 4,4 5,2 5,3 4,4 5,2 5,3 4,7 5,5 5,9

8

Dimensions, mm., max.

а) Length 140 162 162 162

б) Width 95 100 108 118

в) Height 200 200 210 230 210 230 212 232

9 Number of solenoid coils, pcs. 1

10 Temperature of operation medium, ОС –30...+70

11 Service time, switchings, no less than 1 000 000

12 Mounting position on horizontal and verlical pipelines

13 Resistance factor 8,0 11,8 10,4 9,1 12,6

2-position solenoid valves thread(DN32...50)иflanged(DN32,40)connection

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

Page 6: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

6

№p/p Characteristics

BH2Н

–1fl.

BH2Н

–1Кfl.

BH2Н

–2fl.

BH2Н

–2Кfl.

BH2Н

–3fl.

BH2Н

–3Кfl.

BH2Н

–6fl.

BH2½

Н–0,5

BH2½

Н–0,5К

BH2½

Н–1

BH2½

Н–1К

BH2½

Н–3

BH2½

Н–3К

BH2½

Н–6

BH3Н

–0,5

BH3Н

–0,5К

BH3Н

–1

BH3Н

–1К

BH3Н

–3

BH3Н

–3К

BH3Н

–6

BH4Н

–0,5

BH4Н

–0,5К

BH4Н

–1

BH4Н

–1К

BH4Н

–3

BH4Н

–3К

BH4Н

–6

1 Pressure range, bar 0...1 0...2 0...3 0...6 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6

2 Nominal diameter (DN) 50 65 80 100

3Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.

110/14 130/14 150/18 170/18

4 Switching frequency, 1/hour, max 1000 300 300 150 300 150 300 150

5 Nominal capacity, W, max. (of one solenoid coil) 25 35 40 55 65 55 65 90 55 65 90

6 Weight, kg, max 4,7 5,5 5,9 8,2 8,7 9,0 11,0 9,8 10,2 12,5 13,5 11,8 12,1 14,4 15,5

7

Dimensions, mm., max.

а) Length 187 235 258 278

б) Width 118 144 168 183

в) Height 212 232 270 285 300 300 315 320 325 340 345

8 Number of solenoid coils, pcs. 1

9 Temperature of operation medium, ОС –30...+70

10 Service time, switchings, no less than 500 000

11 Mounting position on horizontal and verlical pipelines

12 Resistance factor 11,6 9,4 9,3 10,9

2-position solenoid valves flangedconnection(DN50...100)

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

Page 7: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

7

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

Ordering the solenoid valve with PN16 flanges, please, indicate the type of connecting flanges.Order example: Valve BH2Н-6 fl. (Version: With PN16 flanges).

№p/p Characteristics

BH

1¼Н–1fl.

BH

1¼Н–1Кfl.

BH

1¼Н–3fl.

BH

1¼Н–3Кfl.

BH

1¼Н–6fl.

BH1½

Н–1fl.

BH1½

Н–1Кfl.

BH1½

Н–2fl.

BH1½

Н–2Кfl.

BH1½

Н–3fl.

BH1½

Н–3Кfl.

BH1½

Н–6fl.

BH2Н

–1fl.

BH2Н

–1Кfl.

BH2Н

–2fl.

BH2Н

–2Кfl.

BH2Н

–3fl.

BH2Н

–3Кfl.

BH2Н

–6fl.

Version With PN16 flanges

1 Pressure range, bar 0...1 0...3 0...6 0...1 0...2 0...3 0...6 0...1 0...2 0...3 0...6

2 Nominal diameter (DN) 32 40 50

3Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.(number of orifices)

100 / 18(4 orifices)

110 / 18(4 orifices)

125 / 18(4 orifices)

4 Switching frequency, 1/hour, max 1000 300 1000 300 1000 300

5 Nominal capacity, W, max. (of one solenoid coil) 25 35 25 35 40 25 35 40

6 Weight, kg, max 5,5 6,3 5,7 6,5 6,8 5,9 6,7 7,0

7

Dimensions, mm., max.

а) Length 230

б) Width 140 150 165

в) Height 210 220 240 230 250

8 Number of solenoid coils, pcs. 1

9 Temperature of operation me-dium, ОС –30...+70

10 Service time, switchings, no less than 1 000 000

11 Mounting position on horizontal and verlical pipelines

12 Resistance factor 11,8 9,1 11,6

2-position solenoid valves flangedconnection(DN32...50,withPN16flanges)

Page 8: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

8

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

Ordering the solenoid valve with PN16 flanges, please, indicate the type of connecting flanges.Order example: Valve BH4Н-0,5 (Version: With PN16 flanges).

№p/p Characteristics

BH2½

Н–0,5

BH2½

Н–0,5К

BH2½

Н–1

BH2½

Н–1К

BH2½

Н–3

BH2½

Н–3К

BH2½

Н–6

BH3Н

–0,5

BH3Н

–0,5К

BH3Н

–1

BH3Н

–1К

BH3Н

–3

BH3Н

–3К

BH3Н

–6

BH4Н

–0,5

BH4Н

–0,5К

BH4Н

–1

BH4Н

–1К

BH4Н

–3

BH4Н

–3К

BH4Н

–6

Version With PN16 flanges

1 Pressure range, bar 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6

2 Nominal diameter (DN) 65 80 100

3Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.(number of orifices)

145 / 18(4 orifices)

160 / 18(8 orifices)

180 / 18(8 orifices)

4 Switching frequency, 1/hour, max 300 150 300 150 300 150

5 Nominal capacity, W, max. (of one solenoid coil) 40 55 65 55 65 90 55 65 90

6 Weight, kg, max 8,7 9,2 9,5 11,5 10,3 10,7 13,0 14,0 12,3 12,6 14,9 16,0

7

Dimensions, mm., max.

а) Length 260 290 314

б) Width 185 200 220

в) Height 268 283 298 296 311 316 319 322 337 342 345

8 Number of solenoid coils, pcs. 1

9 Temperature of operation me-dium, ОС –30...+70

10 Service time, switchings, no less than 1 000 000

11 Mounting position on horizontal and verlical pipelines

12 Resistance factor 9,4 9,3 10,9

2-position solenoid valves flangedconnection(DN65...100,withPN16flanges)

Page 9: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

9

№p/p Characteristics

BH½Н–6Y

BH

¾Н–6Y

BH1Н

–6Y

BH1½

Н–1Yfl.

BH1½

Н–2Yfl.

BH1½

Н–3Yfl.

BH1½

Н–6Yfl.

BH2Н

–1Yfl.

BH2Н

–2Yfl.

BH2Н

–3Yfl.

BH2Н

–6Yfl.

1 Pressure range, bar 0...6 0...1 0...2 0...3 0...6 0...1 0...2 0...3 0...6

2 Nominal diameter (DN) 15 20 25 40 50

3 Thread diameter, inches ½ ¾ 1 -

4Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.

- 100 / 12,5 110 / 12,5

5 Switching frequency, 1/hour, max 300 1000 300 1000 300

6 Nominal capacity, W, max. 25 35 40 25 35 40

7 Weight, kg, max 1,9 2,1 3,1 3,9 4,0 4,3 5,1 5,4

8

Dimensions, mm., max.

а) Length 91 99 148 152

б) Width 68 78 108 118

в) Height 156 161 187 207 195 215

9 Number of solenoid coils, pcs. 1

10 Temperature of operation medium, ОС –30...+70

11 Service time, switchings, no less than 1 000 000

12 Mounting position on horizontal and verlical pipelines

13 Resistance factor 3,8 4,9 5,6 5,8 7,1

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

2-position solenoid valves anglebody,threadиflangedconnection(DN15...50)

Solenoid valves in angle body let us minimize the installation sizes significantly, which is important in block boiler rooms, gas distributing plants and other objects with limited space. Resistance of such valves is on the average 40% less than similar linear ones.

Page 10: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

10

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

№p/p Characteristics

BH2½

Н–0,5Y

BH2½

Н–1Y

BH2½

Н–3Y

BH2½

Н–6Y

BH3Н

–0,5Y

BH3Н

–1Y

BH3Н

–3Y

BH3Н

–6Y

BH4Н

–0,5Y

BH4Н

–1Y

BH4Н

–3Y

BH4Н

–6Y

1 Pressure range, bar 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6

2 Nominal diameter (DN) 65 80 100

3Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.

130 / 14 150 / 18 170 / 18

4 Switching frequency, 1/hour, max 300 150 300 150 300 150

5 Nominal capacity, W, max. (of one solenoid coil) 40 55 65 55 65 90 55 65 90

6 Weight, kg, max 6,2 6,5 6,8 8,8 7,2 7,6 9,9 10,9 9,0 9,3 11,6 12,7

7

Dimensions, mm., max.

а) Length 201 229 247

б) Width 143 168 183

в) Height 255 270 285 280 295 300 305 305 320 325 328

8 Number of solenoid coils, pcs. 1

9 Temperature of operation medium, ОС –30...+70

10 Service time, switchings, no less than 500 000

11 Mounting position on horizontal and verlical pipelines

12 Resistance factor 6,0 5,9 6,7

2-position solenoid valves anglebody,flangedconnection(DN65...100)

Page 11: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

11

3-position solenoid valves

№p/p Characteristics

BH¾В–0,2

BH¾В–0,2К

BH¾В–1

BH¾В–1К

BH1В

–0,2

BH1В

–0,2К

BH1В

–0,2fl.

BH1В

–0,2Кfl.

BH1В

–1

BH1В

–1К

BH1В

–1fl.

BH1В

–1Кfl.

BH1½

В–0,2

BH1½

В–0,2fl.

BH2В

–0,2

BH2В

–0,2fl.

BH1½

В–1fl.

BH1½

В–1Кfl.

BH2В

–1fl.

BH2В

–1Кfl.

BH1½

В–3fl.

BH1½

В–3Кfl.

BH2В

–3fl.

BH2В

–3Кfl.

1 Pressure range, bar 0...0,2 0...1 0...0,2 0...1 0...0,2 0...1 0...3

2 Nominal diameter (DN) 20 25 40 50 40 50 40 50

3 Thread diameter, inches ¾ 1 — 1 — 1½ — 2 — — —

4Сenter to center distance of connecting orifices, mm. / orifice diameter, mm. 75

/11

75/1

1

100/

12,5

110/

14

100/

12,5

110/

12,5

100/

12,5

110/

12,5

5 Switching frequency, 1/hour, max 1000

6 Nominal capacity, W, max. (of one solenoid coil) 25 35

7 Weight, kg, max 3,5 3,7 4,7 3,7 4,7 6,4 6,9 6,4 6,9 7,6 8,1

8

Dimensions, mm., max.

а) Length 91 105 160 105 160 162 162 162 187 162

б) Width 65 75 90 75 90 110 120 185 195 190 200

в) Height 250 260 285 260 285 310 215

9 Number of solenoid coils, pcs. 2

10 Temperature of operation medium, ОС –30...+70

11 Service time, switchings, no less than 10⁶

12 Mounting position on horizontal and verlical pipelines

13 Resistance factor 5,9 9,0 6,5 9,0 6,5 10,7 13,2 10,7 13,2 10,7 13,2

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

Solenoid gas valves are applied in remote control systems of various gases, including hydrocarbon gases, gas phases of liquified gases, compressed air and other non-aggressive gases, performing the function of safety shut-off and control device for continuous operating in various gas consumpting and gas distributing systems.

3-position solenoid valves operate in «max. flow rate», «intermediate flow rate» and «closed» modes.

3-position solenoid valves allow to regulate volume of gas flow automatically.

Page 12: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

12

Thevalve'soperationmodedependsonthetypeoftheelectricpowerdriveapplied:1. For the valves with proportional regulation SP0 ("Regada", Slovakia), LM24A-SR ("Belimo", Switzerland), GDB 161.1E

("Siemens", Germany) electric power drives may be applied as actuators.а) For SP0 actuator control voltage is supplied on electromotor and opens (closes) the flapper to the position limited by the

S3 and S4 limit switched. The rotor of the electric motor is connected through a gear with switches S3 and S4 and with the axis of the position transmitter B1 or B3. The resistance of rheostatic type transmitter can be either 2000 Ohm or 100 Ohm (should be specified in the order). Current variation range for electronic transmitter (B3) is 4…20 mA.

Connection circuit of rheostatic transmitter equipped with 2 additional positional switches (S5 и S6) is shown on pic. 1, with current transmitter - pic. 2.

б) LM24A–SR (GDB 161.1E) actuator is operated by standart signal 0...10 V and opens (closes) the valve's flapper to the position, indicated by control signal. Feedback voltage U represents the flapper position in the range 0...100 % of max. flow, and also sets control current for other actuators. Connection scheme is shown on pic. 3.

2. For the valves with positional regulation the power drives LF230-S ("Belimo", Switzerland), GMA 321.1E ("Siemens", Germany) are applied as actuators. The actuator moves the flapper to its normal operating position, stretching the return spring simultaneously. In the case of power shutdown, the spring returns the flapper to its initial position, using the energy stored in the spring. The scheme of electrical connections is shown on pic. 4.

The valve equipped with LF230-S (GMA 321.1E) electric power drive may perform the vavle's slow opening and fast closing function. Gas flow diagram is shown on pic. 5. In this case the mechanical stoppers of the actuator should be at the end points.When the valve is opening initial capacity is 10% of max. flow rate. During the actuator's operation gas flow increases up to 100% of max. flow rate. After the valve is closed, the spring moves the valve's flapper to its initial position during 20 sec. After that period of time the valve may be opened again.

2-position solenoid valves withelectricpowerdrivegeneralindustrialversion

Symbols:

B1 ......... resistance transmitterВ3 ......... electronic position

transmitterMS ........ electric power drive;RL ......... loading resistance;S3, S4 ... position switches;S5, S6 ... additional swiches;Х2.......... terminal strip.

~+

Y U LM24A-SR

1

U=2...10 В

Y=0...10 В

24 В =

2 3 5

+

Control signalU feedback voltage for flapper position indication or for controlling other actuator.

0 2 5 10

50

100

Y[ B ]

% of the flapper open position

Pic.3

100

10 t

РасхоD Q, %

t = 75 cActuator operation time

Valve openingValve closing

1

M

2 S1 S2 S3

LF230-S

N L1~ 230 B

>хх=0...100%

Pic.4 Pic.5

Pic.1 Pic.2

2-position solenoid safety valves with electric power drive are applied in remote control systems of various gases, including hydrocarbon gases, gas phases of liquified gases, compressed air and other non-aggressive gases as safety shut-off and control device for continuous operating in various pipeline systems.

Such solenoid valve has a butterfly flapper built in, which regulates gas volume flowing through the valve.

Page 13: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

13

№p/p Characteristics

BH1½

М–1Кfl.

BH1½

М–2Кfl.

BH1½

М–3Кfl.

BH1½

М–6Кfl.

BH2М

–1Кfl.

BH2М

–2Кfl.

BH2М

–3Кfl.

BH2М

–6Кfl.

1 Pressure range, bar 0...1 0...2 0...3 0...6 0...1 0...2 0...3 0...6

2 Nominal diameter (DN) 40 50

3 Сenter to center distance of connecting orifices, mm. / orifice diameter, mm. 100/14 110/14

4 Switching frequency, 1/hour, max 40

5 Nominal capacity, W, max. 25 35 40 25 35 40

6 Weight, kg, max 7,4 8,2 8,6 7,5 8,3 8,7

7

Dimensions, mm., max.

а) Length (general) Length (installation)

194162

218187

б) Width 268 278

в) Height 210 230 212 232

8 Number of solenoid coils, pcs. 1

9 Temperature of operation medium, ОС –30...+70

10 Service time, switchings, no less than 1.10⁶ (10⁴)***

11 Mounting position on horizontal and verlical pipelines

12 Resistance factor 11,1 14,8

13 Actuator SР0 «Regada» (Slovakia)

2-positionsolenoidvalveswithelectricpowerdrivewithproportionalregulating(DN40...100)

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

Page 14: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

14

№p/p Characteristics

BH2½

М–0,5К

BH2½

М–1К

BH2½

М–3К

BH2½

М–6К

BH3М

–0,5К

BH3М

–1К

BH3М

–3К

BH3М

–6К

BH4М

–0,5К

BH4М

–1К

BH4М

–3К

BH4М

–6К

1 Pressure range, bar 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6

2 Nominal diameter (DN) 65 80 100

3Сenter to center distance of connect-ing orifices, mm. / orifice diameter, mm.

130/14 150/18 170/18

4 Switching frequency, 1/hour, max 40

5 Nominal capacity, W, max. 40 55 65 55 65 90 55 65 90

6 Weight, kg, max 11,4 11,8 12,3 13,0 13,4 15,7 15,0 15,4 17,7

7

Dimensions, mm., max.

а) Length (general) 264 287 316

Length (installation) 235 258 278

б) Width 300 318 333

в) Height 268 283 298 296 311 316 319 322 337 342 345

8 Number of solenoid coils, pcs. 1

9 Temperature of operation medium, ОС –30...+70

10 Service time, switchings, no less than 5.10⁵ (10⁴)***

11 Mounting position on horizontal and verlical pipelines

12 Resistance factor 15,0 15,4 17,7

13 Actuator SР0 «Regada» (Slovakia)

2-positionsolenoidvalveswithelectricpowerdrivewithproportionalregulating(DN40...100)

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

Page 15: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

15

№p/p Characteristics

BH1½

М–1Кfl.

BH1½

М–2Кfl.

BH1½

М–3Кfl.

BH1½

М–6Кfl.

BH2М

–1Кfl.

BH2М

–2Кfl.

BH2М

–3Кfl.

BH2М

–6Кfl.

Version With PN16 flanges

1 Pressure range, bar 0...1 0...2 0...3 0...6 0...1 0...2 0...3 0...6

2 Nominal diameter (DN) 40 50

3 Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.

110 / 18(4 orifices)

125 / 18(4 orifices)

4 Switching frequency, 1/hour, max. 40

5 Nominal capacity, W, max. 25 35 40 25 35 40

6 Weight, kg, max 7,9 8,7 9,1 8,0 8,8 9,2

7

Dimensions, mm., max.

а) Length (general) Length (installation)

260230

б) Width 280 290

в) Height 210 230 212 232

8 Number of solenoid coils, pcs. 1

9 Temperature of operation medium, ОС –30...+70

10 Service time, switchings, no less than 1.10⁶ (10⁴)***

11 Mounting position on horizontal and verlical pipelines

12 Resistance factor 11,1 14,8

13 Actuator SР0 «Regada» (Slovakia)

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

Ordering the solenoid valve with PN16 flanges, please, indicate the type of connecting flanges.Order example: Valve BH2М-1К fl. (Version: With PN16 flanges, actuator SP0 280.0-02 BFC/03).

2-positionsolenoidvalveswithelectricpowerdrive,flangedconnec-tion(DN40...50,proportionalregulating,withPN16flanges)

Page 16: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

16

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

Ordering the solenoid valve with PN16 flanges, please, indicate the type of connecting flanges.Order example: The valve BH4М-1К (Version: With PN16 flanges, actuator SP0 280.0-02 BSC/03).

2-positionsolenoidvalveswithelectricpowerdrive,flangedconnec-tion(DN65...100,proportionalregulating,withPN16flanges)

№p/p Characteristics

BH2½

М–0,5К

BH2½

М–1К

BH2½

М–3К

BH2½

М–6К

BH3М

–0,5К

BH3М

–1К

BH3М

–3К

BH3М

–6К

BH4М

–0,5К

BH4М

–1К

BH4М

–3К

BH4М

–6К

Version With PN16 flanges

1 Pressure range, bar 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6

2 Nominal diameter (DN) 65 80 100

3Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.

145 / 18(4 orifices)

160 / 18(4 orifices)

180 / 18(4 orifices)

4 Switching frequency, 1/hour, max. 40

5 Nominal capacity, W, max. 40 55 65 55 65 90 55 65 90

6 Weight, kg, max 11,4 11,8 12,3 13,0 13,4 15,7 15,0 15,4 17,7

7

Dimensions, mm., max.

а) Length (general) 290 320 345

Length (installation) 260 290 314

б) Width 300 318 333

в) Height 268 283 298 296 311 316 319 322 337 342 345

8 Number of solenoid coils, pcs. 1

9 Temperature of operation medium, ОС –30...+70

10 Service time, switchings, no less than 5.10⁵ (10⁴)***

11 Mounting position on horizontal and verlical pipelines

12 Resistance factor 15,0 15,4 17,7

13 Actuator SР0 «Regada» (Slovakia)

Page 17: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

17

№p/p Characteristics

BH1½

М–1Кfl.

(LM24A-SR,G

DB161.1E)

BH1½

М–2Кfl.

(LM24A-SR,G

DB161.1E)

BH1½

М–3Кfl.

(LM24A-SR,G

DB161.1E)

BH1½

М–6Кfl.

(LM24A-SR,G

DB161.1E)

BH2М

–1Кfl.

(LM24A-SR,G

DB161.1E)

BH2М

–2Кfl.

(LM24A-SR,G

DB161.1E)

BH2М

–3Кfl.

(LM24A-SR,G

DB161.1E)

BH2М

–6Кfl.

(LM24A-SR,G

DB161.1E)

1 Pressure range, bar 0...1 0...2 0...3 0...6 0...1 0...2 0...3 0...6

2 Nominal diameter (DN) 40 50

3Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.

100 / 14 110 / 14

4 Switching frequency, 1/hour, max. 20

5 Nominal capacity, W, max. (of one solenoid coil) 25 35 40 25 35 40

6 Weight, kg, max. 6,9 7,7 8,1 7,0 7,8 8,2

7

Dimensions, mm., max.а) Length (general) Length (installation)

165162

190187

б) Width 210 215в) Height 210 230 212 232

8 Number of solenoid coils, pcs. 1

9 Temperature of operation medium, ОС –30...+70

10 Service time, switchings, no less than 1.10⁶ (10⁴)***

11 Mounting position on horizontal and verlical pipelines

12 Resistance factor 11,1 14,8

13 Actuator LM24A–SR «Belimo» (Switzerland) orGDB 161.1E «Siemens» (Germany)

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code.

2-positionsolenoidvalveswithelectricpowerdrive,flangedconnec-tion(DN40...50,proportionalregulating

Page 18: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

18

№p/p Characteristics

BH2½

М–0,5К

(LM24A-SR,G

DB161.1E)

BH2½

М–1К

(LM24A-SR,G

DB161.1E)

BH2½

М–3К

(LM24A-SR,G

DB161.1E)

BH2½

М–6К

(LM24A-SR,G

DB161.1E)

BH3М

–0,5К

(LM24A-SR,G

DB161.1E)

BH3М

–1К

(LM24A-SR,G

DB161.1E)

BH3М

–3К

(LM24A-SR,G

DB161.1E)

BH3М

–6К

(LM24A-SR,G

DB161.1E)

BH4М

–0,5К

(LM24A-SR,G

DB161.1E)

BH4М

–1К

(LM24A-SR,G

DB161.1E)

BH4М

–3К

(LM24A-SR,G

DB161.1E)

BH4М

–6К

(LM24A-SR,G

DB161.1E)

1 Pressure range, bar 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6

2 Nominal diameter (DN) 65 80 100

3Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.

130 / 14 150 / 18 170 / 18

4 Switching frequency, 1/hour, max.

5 Nominal capacity, W, max. (of one solenoid coil) 40 55 65 55 65 90 55 65 90

6 Weight, kg, max. 9,2 9,5 9,8 11,8 12,5 12,9 14,2 15,2 13,5 13,8 16,1 17,2

7

Dimensions, mm., max.а) Length (general) Length (installation)

238235

260258

280278

б) Width 236 256 272в) Height 268 283 298 296 311 316 319 322 337 342 345

8 Number of solenoid coils, pcs. 1

9 Temperature of operation medium, ОС –30...+70

10 Service time, switchings, no less than 5.10⁵ (10⁴)***

11 Mounting position on horizontal and verlical pipelines

12 Resistance factor 15,0 15,4 17,7

13 Actuator LM24A–SR «Belimo» (Switzerland) orGDB 161.1E «Siemens» (Germany)

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code.

2-positionsolenoidvalveswithelectricpowerdrive,flangedconnec-tion(DN65...100,proportionalregulating)

Page 19: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

19

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code.

№p/p Characteristics

BH1½

М–1Кfl.

(LM24A-SR,G

DB161.1E)

BH1½

М–2Кfl.

(LM24A-SR,G

DB161.1E)

BH1½

М–3Кfl.

(LM24A-SR,G

DB161.1E)

BH1½

М–6Кfl.

(LM24A-SR,G

DB161.1E)

BH2М

–1Кfl.

(LM24A-SR,G

DB161.1E)

BH2М

–2Кfl.

(LM24A-SR,G

DB161.1E)

BH2М

–3Кfl.

(LM24A-SR,G

DB161.1E)

BH2М

–6Кfl.

(LM24A-SR,G

DB161.1E)

Version With PN16 flanges

1 Pressure range, bar 0...1 0...2 0...3 0...6 0...1 0...2 0...3 0...6

2 Nominal diameter (DN) 40 50

3Сenter to center distance of connect-ing orifices, mm. / orifice diameter, mm.(number of orifices)

110 / 18(4 orifices)

125 / 18(4 orifices)

4 Switching frequency, 1/hour, max. 20

5 Nominal capacity, W, max. (of one solenoid coil) 25 35 40 25 35 40

6 Weight, kg, max. 7,4 8,2 8,6 7,5 8,3 8,7

7

Dimensions, mm., max.а) Length (general) Length (installation)

235230

б) Width 230 235в) Height 210 230 212 232

8 Number of solenoid coils, pcs. 1

9 Temperature of operation medium, ОС –30...+70

10 Service time, switchings, no less than 1.10⁶ (10⁴)***

11 Mounting position on horizontal and verlical pipelines

12 Resistance factor 11,1 14,8

13 Actuator LM24A–SR «Belimo» (Switzerland) or GDB 161.1E «Siemens» (Germany)

2-positionsolenoidvalveswithelectricpowerdrive, flangedconnection(DN40...50,proportionalregulating,withPN16flanges)

Page 20: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

20

2-positionsolenoidvalveswithelectricpowerdrive, flangedconnection(DN65...100)

№p/p Characteristics

BH2½

М–0,5К

(LM24A-SR,G

DB161.1E)

BH2½

М–1К

(LM24A-SR,G

DB161.1E)

BH2½

М–3К

(LM24A-SR,G

DB161.1E)

BH2½

М–6К

(LM24A-SR,G

DB161.1E)

BH3М

–0,5К

(LM24A-SR,G

DB161.1E)

BH3М

–1К

(LM24A-SR,G

DB161.1E)

BH3М

–3К

(LM24A-SR,G

DB161.1E)

BH3М

–6К

(LM24A-SR,G

DB161.1E)

BH4М

–0,5К

(LM24A-SR,G

DB161.1E)

BH4М

–1К

(LM24A-SR,G

DB161.1E)

BH4М

–3К

(LM24A-SR,G

DB161.1E)

BH4М

–6К

(LM24A-SR,G

DB161.1E)

Version With PN16 flanges

1 Pressure range, bar 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6

2 Nominal diameter (DN) 65 80 100

3Сenter to center distance of connect-ing orifices, mm. / orifice diameter, mm.(number of orifices)

145 / 18(4 orifices)

160 / 18(8 orifices)

180 / 18(8 orifices)

4 Switching frequency, 1/hour, max. 20

5 Nominal capacity, W, max. (of one solenoid coil) 40 55 65 55 65 90 55 65 90

6 Weight, kg, max. 9,7 10,0 10,3 12,3 12,8 13,4 14,7 15,7 14,0 14,3 16,6 17,7

7

Dimensions, mm., max.а) Length (general) Length (installation)

265260

295290

320314

б) Width 270 290 310в) Height 268 283 298 296 311 316 319 322 337 342 345

8 Number of solenoid coils, pcs. 1

9 Temperature of operation medium, ОС –30...+70

10 Service time, switchings, no less than 1.10⁶ (10⁴)***

11 Mounting position on horizontal and verlical pipelines

12 Resistance factor 15,0 15,4 17,7

13 Исполнительный механизм ЭлектропривоDы LM24A–SR произвоDства фирмы «Belimo» (Switzerland) илиGDB 161.1E произвоDства фирмы «Siemens» (Germany)

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code.

Page 21: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

21

№p/p Characteristics

BH1½

М–1К p

os.fl.

BH1½

М–2К p

os.fl.

BH1½

М–3К p

os.fl.

BH1½

М–6К p

os.fl.

BH2М

–1К p

os.fl.

BH2М

–2К p

os.fl.

BH2М

–3К p

os.fl.

BH2М

–6К p

os.fl.

1 Pressure range, bar 0...1 0...2 0...3 0...6 0...1 0...2 0...3 0...6

2 Nominal diameter (DN) 40 50

3 Сenter to center distance of connecting orifices, mm. / orifice diameter, mm. 100 / 14 110 / 14

4 Switching frequency, 1/hour, max. 20

5 Nominal capacity, W, max. 25 35 40 25 35 40

6 Weight, kg, max 7,4 8,2 8,6 7,5 8,3 8,7

7

Dimensions, mm., max.

а) Length (general) Length (installation)

201162

201187

б) Width 236 243

в) Height 210 230 212 232

8 Number of solenoid coils, pcs. 1

9 Temperature of operation medium, ОС –30...+70

10 Service time, switchings, no less than 1.10⁶ (10⁴)***

11 Mounting position on horizontal and verlical pipelines

12 Resistance factor 11,1 14,8

13 Actuator LF230–S «Belimo» (Switzerland) orGMA 321.1E «Siemens» (Germany)

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

2-positionsolenoidvalveswithelectricpowerdrive,flangedconnec-tion(DN40...50,positionalregulating)

Page 22: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

22

№p/p Characteristics

BH2½

М–0,5К p

os.

BH2½

М–1К p

os.

BH2½

М–3К p

os.

BH2½

М–6К p

os.

BH3М

–0,5К p

os.

BH3М

–1К p

os.

BH3М

–3К p

os.

BH3М

–6К p

os.

BH4М

–0,5К p

os.

BH4М

–1К p

os.

BH4М

–3К p

os.

BH4М

–6К p

os.

1 Pressure range, bar 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6

2 Nominal diameter (DN) 65 80 100

3Сenter to center distance of connect-ing orifices, mm. / orifice diameter, mm.

130 / 14 150 / 18 170 / 18

4 Switching frequency, 1/hour, max. 20

5 Nominal capacity, W, max. (of one solenoid coil) 40 55 65 55 65 90 55 65 90

6 Weight, kg, max 9,5 10,0 10,3 12,3 12,0 12,3 14,6 15,7 14,0 14,3 16,6 17,7

7

Dimensions, mm., max.

а) Length (general) Length (installation)

237235

260258

280278

б) Width 264 284 300

в) Height 268 283 298 296 311 316 319 322 337 342 345

8 Number of solenoid coils, pcs. 1

9 Temperature of operation medium, ОС –30...+70

10 Service time, switchings, no less than 1.10⁶ (10⁴)***

11 Mounting position on horizontal and verlical pipelines

12 Resistance factor 15,0 15,4 17,7

13 Actuator LF230–S «Belimo» (Switzerland) илиGMA 321.1E «Siemens» (Germany)

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

2-positionsolenoidvalveswithelectricpowerdrive,flangedconnec-tion(DN65...100,positionalregulating)

Page 23: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

23

№p/p Characteristics

BH1½

М–1К p

os.fl.

BH1½

М–2К p

os.fl.

BH1½

М–3К p

os.fl.

BH1½

М–6К p

os.fl.

BH2М

–1К p

os.fl.

BH2М

–2К p

os.fl.

BH2М

–3К p

os.fl.

BH2М

–6К p

os.fl.

Version With PN16 flanges

1 Pressure range, bar 0...1 0...2 0...3 0...6 0...1 0...2 0...3 0...6

2 Nominal diameter (DN) 40 50

3Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.(number of orifices)

110 / 18(4 orifices)

125 / 18(4 orifices)

4 Switching frequency, 1/hour, max. 20

5 Nominal capacity, W, max. 25 35 40 25 35 40

6 Weight, kg, max 7,9 8,7 9,1 8,1 8,8 9,2

7

Dimensions, mm., max.

а) Length (general) Length (installation)

245230

245230

б) Width 240 245

в) Height 220 240 230 250

8 Number of solenoid coils, pcs. 1

9 Temperature of operation medium, ОС –30...+70

10 Service time, switchings, no less than 1.10⁶ (10⁴)***

11 Mounting position on horizontal and verlical pipelines

12 Resistance factor 11,1 14,8

13 Actuator LF230–S «Belimo» (Switzerland) orGMA 321.1E «Siemens» (Germany)

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

2-positionsolenoidvalveswithelectricpowerdrive,flangedconnec-tion(DN40...50,positionalregulating,withPN16flanges)

Page 24: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

24

№p/p Characteristics

BH2½

М–0,5К p

os.

BH2½

М–1К p

os.

BH2½

М–3К p

os.

BH2½

М–6К p

os.

BH3М

–0,5К p

os.

BH3М

–1К p

os.

BH3М

–3К p

os.

BH3М

–6К p

os.

BH4М

–0,5К p

os.

BH4М

–1К p

os.

BH4М

–3К p

os.

BH4М

–6К p

os.

Version With PN16 flanges

1 Pressure range, bar 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6

2 Nominal diameter (DN) 65 80 100

3Сenter to center distance of connect-ing orifices, mm. / orifice diameter, mm.(number of orifices)

145 / 18(4 orifices)

160 / 18(8 orifices)

160 / 18(8 orifices)

4 Switching frequency, 1/hour, max. 20

5 Nominal capacity, W, max. 40 55 65 55 65 90 55 65 90

6 Weight, kg, max 10,0 10,5 10,8 12,8 12,5 12,8 15,1 16,2 14,5 14,8 17,1 18,2

7

Dimensions, mm., max.

а) Length (general) Length (installation)

265260

295290

320314

б) Width 290 305 330

в) Height 268 283 298 296 311 316 319 322 337 342 345

8 Number of solenoid coils, pcs. 1

9 Temperature of operation medium, ОС –30...+70

10 Service time, switchings, no less than 1.10⁶ (10⁴)***

11 Mounting position on horizontal and verlical pipelines

12 Resistance factor 15,0 15,4 17,7

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

2-positionsolenoidvalveswithelectricpowerdrive,flangedconnec-tion(DN65...100,positionalregulating,withPN16flanges)

Page 25: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

25

№p/p Characteristics

BH½Т–6

BH

¾Т–6

BH1Т–6

BH1¼

Т–6

BH1½

Т–6

BH2Т–6

BH½Т–6fl.

BH

¾Т–6fl.

BH1Т–6fl.

BH1¼

Т–6fl.

BH1½

Т–6fl.

BH2Т–6fl.

1 Pressure range, bar 0...6

2 Nominal diameter (DN) 15 20 25 32 40 50 15 20 25 32 40 50

3 Thread diameter, inches ½ ¾ 1 1¼ 1½ 2 —

4Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.

— 55 / 12 65 / 12 75 / 11 90 /12,5

100/ 14

110/ 14

5 Opening time, sec. 5...20 5...30 5...20 5...30

6 Switching frequency, 1/hour, max 30

7 Nominal capacity, W, max. 55 65 55 65

8 Weight, kg, max 4,5 5,0 6,0 6,2 6,6 4,8 5,0 6,0 6,2 6,6

9

Dimensions, mm., max.

а) Length 100 120 140 162 147 160 162 187

б) Width 80 95 108 108 83 95 108 118

в) Height 300 302 370 365 302 360 375 395

10 Number of solenoid coils, pcs. 1

11 Temperature of operation medium, ОС –30...+70

12 Service time, switchings, no less than 50 000

13 Mounting position on horizontal and verlical pipelines

14 Resistance factor 5,2 8,0 11,0 11,8 10,4 12,6 2,5 6,1 6,2 11,8 9,1 11,6

Solenoid valves with slow opening mode are applied as shut-off device in various pipeline systems, which require slow opening of the valve (pneumatic shock is unacceptable at the moment of opening).

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

2-position solenoid valves withslowopeningmode(DN15...50)

Page 26: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

26

№p/p Characteristics

BH2½

Т–6

BH3Т–6

BH4Т–6

BH

1¼Т–6fl.

(PN

16)

BH

1½Т–6fl.

(PN

16)

BH

2Т–6fl.

(PN

16)

BH

2½Т–6

(PN

16)

BH3Т–6

(PN

16)

BH4Т–6

(PN

16)

Version With PN6 flanges With PN16 flanges

1 Pressure range, bar 0...6

2 Nominal diameter (DN) 65 80 100 32 40 50 65 80 100

3Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.(number of orifices)

130 / 14(4 orifices)

150 / 14(4 orifices)

170 / 14(4 orifices)

100 / 18(4 orifices)

110 / 18(4 orifices)

125 / 18(4 orifices)

145 / 18(4 orifices)

160 / 18(8 orifices)

180 / 18(8 orifices)

4 Opening time, sec. 15...40 5...30 15...40

5 Switching frequency, 1/hour, max 30

6 Nominal capacity, W, max. 90 120 65 90 120

7 Weight, kg, max 12,0 14,2 16,2 6,5 6,7 7,1 12,5 14,7 16,8

8

Dimensions, mm., max.

а) Length 235 258 278 230 260 290 314

б) Width 144 168 183 140 150 165 185 200 220

в) Height 457 480 505 400 420 457 480 505

10 Number of solenoid coils, pcs. 1

11 Temperature of operation medium, ОС –30...+70

12 Service time, switchings, no less than 50 000

13 Mounting position on horizontal and verlical pipelines

14 Resistance factor 9,4 9,3 10,9 11,8 9,1 11,6 9,4 9,3 10,9

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

2-position solenoid valves withslowopeningmode(DN65...100иDN32...100,PN16)

Solenoid valves with slow opening mode are applied as shut-off device in various pipeline systems, which require slow opening of the valve (pneumatic shock is unacceptable at the moment of opening).

Page 27: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

27

Solenoid valves with manual start-up function of electric type are used as shut-off device in various pipeline systems, which require guaranteed valve closing when power supply fails and it's necessary to secure manual open of the valve only after activating the control unit (button) by operating personnel. The button is placed on valve's connection box.

№p/p Characteristics

BH½Р–

4

BH½Р–

4fl.

BH½Р–

6

BH½Р–

6fl.

BH¾Р–

4

BH¾Р–

4fl.

BH¾Р–

6

BH¾Р–

6fl.

BH1Р

–4

BH1Р

–6

BH1Р

–4fl.

BH1Р

–6fl.

BH1¼

Р–1

BH1¼

Р–3

BH1¼

Р–6

BH1¼

Р–1fl.

BH1¼

Р–3fl.

BH1¼

Р–6fl.

BH1½

Р–1

BH1½

Р–1fl.

BH1½

Р–2

BH1½

Р–2fl.

BH1½

Р–3

BH1½

Р–3fl.

BH1½

Р–6

BH1½

Р–6fl.

1 Pressure range, bar 0...4 0...6 0...4 0...6 0...4 0...6 0...4 0...6 0...1 0...3 0...6 0...1 0...3 0...6 0...1 0...2 0...3 0...6

2 Nominal diameter (DN) 15 20 25 32 40

3 Thread diameter, inches ½ — ½ — ¾ — ¾ — 1 — 1¼ — 1½

4Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.

— 55/1

2

— 55/1

2

— 65/1

2

— 65/1

2

— 75/11 — 90/12,5 100/14

5 Switching frequency, 1/hour, max 500

6 Nominal capacity, W, max. 25 35 25 35 25 35 25 35 25 35 40

7 Weight, kg, max 1,9 2,4 2,5 3,0 1,9 2,4 2,5 3,0 2,1 2,8 3,5 4,5 3,2 4,0 4,2 5,0 4,4 5,2 5,3

8

Dimensions, mm., max.

а) Length 95 147 95 147 95 147 95 147 105 160 140 165

б) Width 65 83 80 83 65 83 80 83 75 80 95 100 110

в) Height 135 138 160 167 135 138 160 167 140 170 195 200 210 230

9 Number of solenoid coils, pcs. 1

10 Temperature of operation medium, ОС –30...+70

11 Service time, switchings, no less than 500 000

12 Mounting position on horizontal and verlical pipelines

13 Resistance factor 5,2 2,5 5,2 2,5 5,2 6,1 8,0 6,1 8,0 11,0 6,2 10,4/9,1** 12,6/11,6**

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code.

2-position solenoid valves withmanualstart-upfunctionofelectrictype(DN15...40)

Page 28: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

28

№p/p Characteristics

BH2Р

–1

BH2Р

–1fl.

BH2Р

–2

BH2Р

–2fl.

BH2Р

–3

BH2Р

–3fl.

BH2Р

–6

BH2Р

–6fl.

BH2½

Р–0,5

BH2½

Р–1

BH2½

Р–3

BH2½

Р–6

BH3Р

–0,5

BH3Р

–1

BH3Р

–3

BH3Р

–6

BH4Р

–0,5

BH4Р

–1

BH4Р

–3

BH4Р

–6

1 Pressure range, bar 0...1 0...2 0...3 0...6 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6 0...0,5 0...1 0...3 0...6

2 Nominal diameter (DN) 50 65 80 100

3 Thread diameter, inches 2

4Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.

110/14 130/14 150/18 170/18

5 Switching frequency, 1/hour, max 500

6 Nominal capacity, W, max. (of one solenoid coil) 25 35 40 55 65 55 65 90 55 65 90

7 Weight, kg, max 4,7 5,5 5,9 8,2 8,7 9,0 11,0 9,8 10,2 12,5 13,5 11,8 12,1 14,4 15,5

8

Dimensions, mm., max.

а) Length 162/(187)** 235 258 278

б) Width 120 145 170 185

в) Height 215 235 270 285 300 300 315 320 325 340 345

9 Number of solenoid coils, pcs. 1

10 Temperature of operation medium, ОС –30...+70

11 Service time, switchings, no less than 500 000

12 Mounting position on horizontal and verlical pipelines

13 Resistance factor 12,6/11,6** 9,4 9,3 10,9

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code. All solenoid safety valves can be produced in explosion proof version. The letter E should be added to the valve's code. Возможно изготовление клапанов с ручным взвоDом электрического типа номинальными Dиаметрами DN 32-100 с

присоеDинительными фланцами PN16.

2-position solenoid valves withmanualstart-upfunctionofelectrictype(DN50...100)

Page 29: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

29

Solenoid valves with manual start-up function of mechanical type are used as shut-off device in various pipeline systems, which require guaranteed valve closing when power supply fails and it's necessary to secure manual open of the valve only after pulling the manual activation lever by operating personnel.

№p/p Characteristics

BH½Рм

–6

BH½Рм

–6fl.

BH¾Рм

–6

BH¾Рм

–6fl.

BH1Р

м–6

BH1Р

м–6fl.

BH1¼

Рм–6

BH1¼

Рм–6fl.

BH1½

Рм–6

BH1½

Рм–6fl.

BH2Р

м–6

BH2Р

м–6fl.

BH2½

Рм–6

BH3Р

м–6

BH4Р

м–6

1 Pressure range, bar 0...6

2 Nominal diameter (DN) 15 20 25 32 40 50 65 80 100

3 Thread diameter, inches ½ — ¾ — 1 — 1¼ — 1½ — 2 —

4Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.

55/1

2

65/1

2

75/1

1

90/1

2,5

100/

14

110/

14

130/

14

150/

18

170/

18

5 Switching frequency, 1/hour, max 50

6 Nominal capacity, W, max. 18

7 Weight, kg, max 2,0 2,5 2,0 2,5 2,2 3,2 3,5 3,8 4,0 6,2 7,8 9,7

8

Dimensions, mm., max.

а) Length 91 147 91 147 105 160 140 162 187 235 258 278

б) Width 65 83 65 83 75 95 100 110 120 145 170 185

в) Height 210 245 210 245 220 245 235 250 260 315 330 360

9 Number of solenoid coils, pcs. 1

10 Temperature of operation medium, ОС –30...+70

11 Service time, switchings, no less than 50 000

12 Mounting position on horizontal and verlical pipelines

13 Resistance factor 5,2 2,5 8,0 6,1 11,0 6,2 11,8 10,4 9,1 12,6 11,6 9,4 9,3 10,9

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code.

2-position solenoid valves withmanualstart-upfunctionofmechanicaltype(DN15...100)

Page 30: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

30

Doublesolenoidsafetyvalves BH - series (aluminium body)

Field of applicationDouble solenoid gas valves are applied in remote control systems of various gases, including

hydrocarbon gases, gas phases of liquified gases, compressed air and other non-aggressive gases and perform the function of safety shut-off and control device for continuous operating in various gas consumpting and gas distributing systems.

The double valve is a multifunctional gas flow control device. It consists of 2 solenoid valves combined in one housing and can perform the function of 3-position step-by-step regulation, smooth and slow opening and fast closing of gas flow (depends on the type of the double valve).

Such valves are applied widely in front of gas burners and similar devices, which require multistage gas flow control. Such valves also have much smaller dimensions, than gas valves block units.

1. В — series2. Initial position: Н — normally closed3. Connection size, inches4. Type: D — 2-position double valve DВ — 3-position double valve DТ — 2-position double valve with slow opening mode DМ — 2-position double valve with electric power drive DТМ — 2-position double valve with slow opening mode and electric power drive5. Nominal pressure range, bar6. Options: К — equipped with manual gas flow regulator P — equipped with position indicator (open/closed) Е — explosion proof version7. Power supply voltage, V8. AC frequency, Hz9. Climatic version10. Technical conditions number

Technical dataSupply voltage, V DC 220, 110, 24, 12*; 50 Hz AC 220, 110, 24, 12* * for solenoid coils up to 25 WOpening/closing time, sec, max 1Class of leak-tightness AIsolation class FDegree of protection IP65, IP67 (for explosion proof version)Environment temperature, °C –30...+40 –45...+40 –60...+40 (under cover)

–60...+40 (outdoor conditions - only for explosion proof version)

Code structure1 2 3 4 5 6 7 8 9 10

В Н 1 D 4 К 220V 50Hz У3.1 ТУРБ05708554.021-96

Page 31: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

31

2-position double solenoid valvesthreadandflangedconnection(DN15...50)

№p/p Characteristics

BH½D–4

BH½D–4К

BH¾D–4

BH¾D–4К

BH1D

–4BH1D

–4К

BH1¼

D–3

BH1¼

D–3К

BH1½

D–3

BH1½

D–3К

BH2D

–3BH2D

–3К

BH½D–4fl.

BH½D–4Кfl.

BH¾D–4fl.

BH¾D–4Кfl.

BH1D

–4fl.

BH1D

–4Кfl.

BH1¼

D–3fl.

BH1¼

D–3Кfl.

BH1½

D–3fl.

BH1½

D–3Кfl.

BH2D

–3fl.

BH2D

–3Кfl.

1 Pressure range, bar 0...4 0...3 0...4 0...3

2 Nominal diameter (DN) 15 20 25 32 40 50 15 20 25 32 40 50

3 Thread diameter, inches ½ ¾ 1 1¼ 1½ 2 —

4Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.

— 55 / 12 65 / 12 75 / 11 90 /12,5

100 /14

110 /14

5 Switching frequency, 1/hour, max 1000

6 Nominal capacity, W, max. (of one solenoid coil) 25

7 Weight, kg, max 4,8 11,0 3,8 9,8

8

Dimensions, mm., max.

а) Length 234 336 180 270

б) Width 105 138 105 138

в) Height 143 212 143 212

9 Number of solenoid coils, pcs. 2

10 Temperature of operation medium, ОС –30...+70

11 Service time, switchings, no less than 1 000 000

12 Mounting position on horizontal and verlical pipelines

13 Resistance factor 11,2 16,2 11,2 16,2

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code.

Page 32: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

32

3-position double solenoid valves threadandflangedconnection(DN15...50)

№p/p Characteristics

BH½DВ–1

BH½DВ–1К

BH¾DВ–1

BH¾DВ–1К

BH1D

В–1

BH1D

В–1К

BH1¼

DВ–0,2

BH1¼

DВ–0,2К

BH1½

DВ–0,2

BH1½

DВ–0,2К

BH2D

В–0,2

BH2D

В–0,2К

BH½DВ–1fl.

BH½DВ–1Кfl.

BH¾DВ–1fl.

BH¾DВ–1Кfl.

BH1D

В–1fl.

BH1D

В–1Кfl.

BH1¼

DВ–0,2fl.

BH1¼

DВ–0,2Кfl.

BH1½

DВ–0,2fl.

BH1½

DВ–0,2Кfl.

BH2D

В–0,2fl.

BH2D

В–0,2Кfl.

1 Pressure range, bar 0...1 0...0,2 0...1 0...0,2

2 Nominal diameter (DN) 15 20 25 32 40 50 15 20 25 32 40 50

3 Thread diameter, inches ½ ¾ 1 1¼ 1½ 2 —

4Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.

— 55 / 12 65 / 12 75 / 11 90 /12,5

100 /14

110 /14

5 Switching frequency, 1/hour, max 1000

6 Nominal capacity, W, max. (of one solenoid coil) 25

7 Weight, kg, max 5,7 12,1 4,7 10,9

8

Dimensions, mm., max.

а) Length 234 336 180 270

б) Width 105 138 105 138

в) Height 230 307 230 307

9 Number of solenoid coils, pcs. 3

10 Temperature of operation medium, ОС –30...+70

11 Service time, switchings, no less than 1 000 000

12 Mounting position on horizontal and verlical pipelines

13 Resistance factor 11,2 16,2 11,2 16,2

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code.

Page 33: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

33

2-positiondoublesolenoidvalveswithslowopeningmode threadandflangedconnection(DN15...50)

№p/p Characteristics

BH½DТ–4

BH½DТ–4К

BH¾DТ–4

BH¾DТ–4К

BH1D

Т–4

BH1D

Т–4К

BH1¼

DТ–3

BH1¼

DТ–3К

BH1½

DТ–3

BH1½

DТ–3К

BH2D

Т–3

BH2D

Т–3К

BH½DТ–4fl.

BH½DТ–4Кfl.

BH¾DТ–4fl.

BH¾DТ–4Кfl.

BH1D

Т–4fl.

BH1D

Т–4Кfl.

BH1¼

DТ–3fl.

BH1¼

DТ–3Кfl.

BH1½

DТ–3fl.

BH1½

DТ–3Кfl.

BH2D

Т–3fl.

BH2D

Т–3Кfl.

1 Pressure range, bar 0...4 0...3 0...4 0...3

2 Nominal diameter (DN) 15 20 25 32 40 50 15 20 25 32 40 50

3 Thread diameter, inches ½ ¾ 1 1¼ 1½ 2 —

4Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.

— 55 / 12 65 / 12 75 / 11 90 /12,5

100 /14

110 /14

5 Switching frequency, 1/hour, max 30

6 Nominal capacity, W, max. (of one solenoid coil) 55 65

7 Weight, kg, max 6,1 12,5 5,2 11,4

8

Dimensions, mm., max.

а) Length 234 336 180 270

б) Width 105 138 105 138

в) Height 300 385 300 385

9 Number of solenoid coils, pcs. 2

10 Temperature of operation medium, ОС –30...+70

11 Service time, switchings, no less than 1 000 000

12 Mounting position on horizontal and verlical pipelines

13 Resistance factor 11,2 16,2 11,2 16,2

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code.

Page 34: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

34

2-positiondoublesolenoidvalveswithwithelectricpowerdrivethreadandflangedconnection(DN15...50)

№p/p Characteristics

BH½DМ–4

BH¾DМ–4

BH1D

М–4

BH1¼

DМ–3

BH1½

DМ–3

BH2D

М–3

BH½DМ–4fl.

BH¾DМ–4fl.

BH1D

М–4fl.

BH1¼

DМ–3fl.

BH1½

DМ–3fl.

BH2D

М–3fl.

1 Pressure range, bar 0...4 0...3 0...4 0...3

2 Nominal diameter (DN) 15 20 25 32 40 50 15 20 25 32 40 50

3 Thread diameter, inches ½ ¾ 1 1¼ 1½ 2 —

4Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.

— 55 / 12 65 / 12 75 / 11 90 /12,5

100 /14

110 /14

5 Switching frequency, 1/hour, max 1000

6 Nominal capacity, W, max. (of one solenoid coil) 25

7 Weight, kg, max 5,5 11,7 4,5 10,5

8

Dimensions, mm., max.

а) Length 234 336 180 270

б) Width 165 200 165 200

в) Height 143 212 143 212

9 Number of solenoid coils, pcs. 2

10 Temperature of operation medium, ОС –30...+70

11 Service time, switchings, no less than 1 000 000

12 Mounting position on horizontal and verlical pipelines

13 Resistance factor 11,2 16,2 11,2 16,2

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped with power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code.

Page 35: Solenoid safety valves BH, BF - seriestermobrest.net/sitefiles/1/5/6/solenoid_valves.pdf · 2. Solenoid gas valves in aluminium body are equipped with inlet filter built in. 3. Solenoid

35

2-positiondoublesolenoidvalveswithslowopeningmodeandelectricpowerdrive threadandflangedconnection(DN15...50)

№p/p Characteristics

BH½DТМ

–4

BH¾DТМ

–4

BH1D

ТМ–4

BH1¼

DТМ

–3

BH1½

DТМ

–3

BH2D

ТМ–3

BH½DТМ

–4fl.

BH¾DТМ

–4fl.

BH1D

ТМ–4fl.

BH1¼

DТМ

–3fl.

BH1½

DТМ

–3fl.

BH2D

ТМ–3fl.

1 Pressure range, bar 0...4 0...3 0...4 0...3

2 Nominal diameter (DN) 15 20 25 32 40 50 15 20 25 32 40 50

3 Thread diameter, inches ½ ¾ 1 1¼ 1½ 2 —

4Сenter to center distance of connecting orifices, mm. / orifice diameter, mm.

— 55 / 12 65 / 12 75 / 11 90 /12,5

100 /14

110 /14

5 Switching frequency, 1/hour, max 30

6 Nominal capacity, W, max. (of one solenoid coil) 55 65

7 Weight, kg, max 6,8 13,3 5,9 12,1

8

Dimensions, mm., max.

а) Length 234 336 180 270

б) Width 165 200 165 200

в) Height 300 385 300 385

9 Number of solenoid coils, pcs. 2

10 Temperature of operation medium, ОС –30...+70

11 Service time, switchings, no less than 1 000 000

12 Mounting position on horizontal and verlical pipelines

13 Resistance factor 11,2 16,2 11,2 16,2

Notes:Solenoid safety valves are produced in power saving version. The valves are equipped witсч power control board which allows to reduce

the energy consumption up to 50% of the initial in 10 sec after the valve is switched on. All solenoid safety valves can be equipped with position indicator. The letter P should be added to the valve's code.