soam test configuration...this configuration will allow testing of y.1731 (up-meps, down-meps, mip,...

SOAM Test ConfigurationION x3230

www.transition.com +1 (952) 941-7600 | 1 (800) 526-9267 | © 2010 Transition Networks, Inc. |

Transition Networks, Inc.10900 Red Circle DriveMinnetonka, MN 55343 USA

Transition Networks Inc. offers networking connectivity solutions that make networks perform better, faster and more reliably while helping companies leverage their existing networking infrastructure.

SOAM TEST

YOUR NETWORK. OUR CONNECTION.

TABLE OF CONTENTS

ION x3230: SOAM Test Configuration ……….......................................... 1

1 SOAM Test Configuration . ................................................................... 3

2 802.1ag Test Configuration ................................................................... 5

2.1 Configuration from CLI of Device A................................................... 12

2.2 Configuration from CLI of Device B................................................... 15

2.3 Configuration from CLI of Device C .................................................. 19

2.4 Configuration from CLI of Device D .................................................. 23

3 Y.1731 Test Configuration ................................................................... 26

3.1 Configuration from CLI of Device A................................................... 33

3.2 Configuration from CLI of Device B................................................... 36

3.3 Configuration from CLI of Device C .................................................. 40

3.4 Configuration from CLI of Device D .................................................. 44

1 SOAM Test configuration

The test setup tests SOAM between two subscriber sites: CPE1 and CPE2 (for testing it ismanaged in the same chassis.) This configuration will allow testing of Y.1731 (UP-MEPs, DOWN-MEPs, MIP, AIS, etc) and 802.1ag (UP- MEPs, DOWN-MEPs and MIP)and also will help verify nesting rules of Management Domains. This configuration is atypical configuration of devices for a customer network.

1) Two C3230-S3230 pairs will be used for SOAM testing2) A total of 3 MEG levels will be tested as specified in the configuration document.

Two of them will be C-tagged MEGs and one untagged MEG.3) Devices A and D will have the MEPs for provider MEG, devices B and C will

have the MIPs at Level 6.4) Devices B and C will have MEPs and MIPs for operator MEG at Level 35) UNI MEG will be configured between A-B, B-C, and C-D.

2

1

1

2

CPE 2

S3230-1040

C3230-1040

IONMM

1

2

CPE 1

2

1

C3230-1040

S3230-1040

PossibleNetwork

B

A

C

D

The layouts of the MEG levels are as below:

A B C D

Provider MEG (L=6)

Operator MEG (L=3)

UNI MEG (L=0)

MIP Down MEP Up MEP

CPE

CPE

Customer MEG (L=7)

LINK-OAM (.ah)

2 802.1ag Test Configuration

A B C D

ProviderCTag200 (MD Level=6, MD ID=6, c-vid=200)

OperatorCTag100 (MD Level = 3, MD ID=3, c-vid=100)

UNIabUntagged(MD Level=0,

MD ID=1)

MIP Down MEP Up MEP

CPE

CPE

Customer MEG (L=7)

UNIbcUntagged(MD Level=0,

MD ID=11)

UNIcdUntagged(MD Level=0,MD ID=111)

610 611 612 620

310 320311 312

10 20 30 40 50 60

******************************************* 802.1ag ( All MAs on different CTAGs) *******************************************

## Device A ################################

## Level 0 UNI ##add soam md local-md-id 1 md-name UNIabMD md-level 0

add soam ma local-ma-id 1 local-md-id 1 ma-name UNIabUntagged vlan-typenone

set soam ma local-ma-id 1 attr_name mepid-add attr_value 10


add soam mep mep-id 10 local-parent-id 1 direction down port 2

set soam mep config mep-id 10 local-parent-id 1 attr_name adminattr_value enable

set soam mep config mep-id 10 local-parent-id 1 attr_name cciattr_value enable

## Level 6 Provider MD ##add soam md local-md-id 6 md-name ProviderMD md-level 6

add soam ma local-ma-id 6 local-md-id 6 ma-name ProviderCTag200 vlan-type ctype 200






## Device B ################################## Level 0 UNI ##add soam md local-md-id 1 md-name UNIabMD md-level 0

add soam ma local-ma-id 1 local-md-id 1 ma-name UNIabUntagged vlan-typenone






## Level 0 UNI ##add soam md local-md-id 11 md-name UNIbcMD md-level 0

add soam ma local-ma-id 11 local-md-id 11 ma-name UNIbcUntagged vlan-type none






## Level 3 Operator MD ##add soam md local-md-id 3 md-name OperatorMD md-level 3

add soam ma local-ma-id 3 local-md-id 3 ma-name OperatorCTag100 vlan-type ctype 100



add soam mep mep-id 310 local-parent-id 3 direction up port 2



add soam mip mip-type 802.1ag local-mip-id 311 local-parent-id 3 port 1

set soam mip local-mip-id 311 attr-name admin attr-val enable





## Device C ################################## Level 0 UNI ##add soam md local-md-id 11 md-name UNIbcMD md-level 0

add soam ma local-ma-id 11 local-md-id 11 ma-name UNIbcUntagged vlan-type none






## Level 0 UNI ##add soam md local-md-id 111 md-name UNIcdMD md-level 0

add soam ma local-ma-id 111 local-md-id 111 ma-name UNIcdUntagged vlan-type none






## Level 3 Operator MD ##add soam md local-md-id 3 md-name OperatorMD md-level 3

add soam ma local-ma-id 3 local-md-id 3 ma-name OperatorCTag100 vlan-type ctype 100







## Device D ################################## Level 0 UNI ##add soam md local-md-id 111 md-name UNIcdMD md-level 0

add soam ma local-ma-id 111 local-md-id 111 ma-name UNIcdUntagged vlan-type none













2.1 Configuration from CLI of Device A

C1|S12|L1AP2|L2D>#### DEVICE A ###C1|S12|L1AP2|L2D>show soam mdLocal MD ID Name Level MAs MIPs Permission-----------------------------------------------------------

1 UNIabMD 0 1 0 none6 ProviderMD 6 1 0 none

C1|S12|L1AP2|L2D>show soam maMA index : 1MD index : 1MD level : 0MD name : UNIabMDMA name : UNIabUntaggedCCM interval : 1sMEPs : 1MEP ID list : (2 MepIds) 10 20Permission : deferVLAN ID list : noneAuto detection timeout : 4000Auto detect remote MEP : disabled

MA index : 6MD index : 6MD level : 6MD name : ProviderMDMA name : ProviderCTag200CCM interval : 1sMEPs : 1MEP ID list : (2 MepIds) 610 620Permission : deferVLAN ID list : ctype: 200Primary VLAN ID : 200Auto detection timeout : 4000Auto detect remote MEP : disabled

C1|S12|L1AP2|L2D>show soam mip configThe MIPs table is empty.

C1|S12|L1AP2|L2D>show soam mep configMEP id : 10MD local ID : 1MD level : 0MD name : UNIabMDMA local ID : 1MA name : UNIabUntaggedDirection : downPort : 2VLANs : nonePrimary VLAN : 0Admin status : enabledCCI status : enabledFault notification state : ResetDefects :

Next LTM transaction ID : 1Next LBM transaction ID : 1CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxcon

MEP id : 610MD local ID : 6MD level : 6MD name : ProviderMDMA local ID : 6MA name : ProviderCTag200Direction : downPort : 2VLANs : ctype: 200Primary VLAN : 200Admin status : enabledCCI status : enabledFault notification state : ResetDefects :Next LTM transaction ID : 1Next LBM transaction ID : 1CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxcon

C1|S12|L1AP2|L2D>show soam mep cc mep-id 10 local-parent-id 1MEP ID : 10MD Local ID : 1MD level : 0MD name : UNIabMD

Remote MEP ID : 20State : OKTimeStamp : 233.98 secMAC : 00:C0:F2:20:E2:18RDI BIT : FalsePort Status : No Port StateInterface Status : No Interface StatusChassis id subtype : NoneChassis id :Manage address domain : 0.0Manage address :Autodetected : No

C1|S12|L1AP2|L2D>show soam mep cc mep-id 610 local-parent-id 6MEP ID : 610MD Local ID : 6MD level : 6MD name : ProviderMD

Remote MEP ID : 620State : OKTimeStamp : 5569.85 secMAC : 00:C0:F2:42:01:8E

RDI BIT : FalsePort Status : No Port StateInterface Status : No Interface StatusChassis id subtype : NoneChassis id :Manage address domain : 0.0Manage address :Autodetected : No

2.2 Configuration from CLI of Device B

C1|S12|L1D>#### DEVICE B ###C1|S12|L1D>show soam mdLocal MD ID Name Level MAs MIPs Permission-----------------------------------------------------------

1 UNIabMD 0 1 0 none3 OperatorMD 3 1 1 none6 ProviderMD 6 1 1 none

11 UNIbcMD 0 1 0 none

C1|S12|L1D>show soam maMA index : 1MD index : 1MD level : 0MD name : UNIabMDMA name : UNIabUntaggedCCM interval : 1sMEPs : 1MEP ID list : (2 MepIds) 10 20Permission : deferVLAN ID list : noneAuto detection timeout : 4000Auto detect remote MEP : disabled

MA index : 3MD index : 3MD level : 3MD name : OperatorMDMA name : OperatorCTag100CCM interval : 1sMEPs : 1MEP ID list : (2 MepIds) 310 320Permission : deferVLAN ID list : ctype: 100Primary VLAN ID : 100Auto detection timeout : 4000Auto detect remote MEP : disabled

MA index : 6MD index : 6MD level : 6MD name : ProviderMDMA name : ProviderCTag200CCM interval : 1sMEPs : 0MEP ID list : (0 MepIds)Permission : deferVLAN ID list : ctype: 200Primary VLAN ID : 200Auto detection timeout : 4000Auto detect remote MEP : disabled

MA index : 11MD index : 11

MD level : 0MD name : UNIbcMDMA name : UNIbcUntaggedCCM interval : 1sMEPs : 1MEP ID list : (2 MepIds) 30 40Permission : deferVLAN ID list : noneAuto detection timeout : 4000Auto detect remote MEP : disabled

C1|S12|L1D>show soam mip configMIP id : 311MD local ID : 3MD level : 3MD name : OperatorMDVLANs : ctype: 100Port : 1Admin status : enabled

MIP id : 611MD local ID : 6MD level : 6MD name : ProviderMDVLANs : ctype: 200Port : 2Admin status : enabled

C1|S12|L1D>show soam mep configMEP id : 20MD local ID : 1MD level : 0MD name : UNIabMDMA local ID : 1MA name : UNIabUntaggedDirection : downPort : 2VLANs : nonePrimary VLAN : 0Admin status : enabledCCI status : enabledFault notification state : ResetDefects :Next LTM transaction ID : 1Next LBM transaction ID : 1CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxcon

MEP id : 310MD local ID : 3MD level : 3MD name : OperatorMDMA local ID : 3MA name : OperatorCTag100Direction : up

Port : 2VLANs : ctype: 100Primary VLAN : 100Admin status : enabledCCI status : enabledFault notification state : ResetDefects :Next LTM transaction ID : 1Next LBM transaction ID : 1CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxcon

MEP id : 30MD local ID : 11MD level : 0MD name : UNIbcMDMA local ID : 11MA name : UNIbcUntaggedDirection : downPort : 1VLANs : nonePrimary VLAN : 0Admin status : enabledCCI status : enabledFault notification state : ResetDefects :Next LTM transaction ID : 1Next LBM transaction ID : 1CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxcon

C1|S12|L1D>C1|S12|L1D>show soam mep cc mep-id 20 local-parent-id 1MEP ID : 20MD Local ID : 1MD level : 0MD name : UNIabMD

Remote MEP ID : 10State : OKTimeStamp : 73229.15 secMAC : 00:C0:F2:42:01:16RDI BIT : FalsePort Status : No Port StateInterface Status : No Interface StatusChassis id subtype : NoneChassis id :Manage address domain : 0.0Manage address :Autodetected : No

C1|S12|L1D>show soam mep cc mep-id 310 local-parent-id 3MEP ID : 310

MD Local ID : 3MD level : 3MD name : OperatorMD

Remote MEP ID : 320State : OKTimeStamp : 77828.94 secMAC : 00:C0:F2:42:00:E0RDI BIT : FalsePort Status : No Port StateInterface Status : No Interface StatusChassis id subtype : NoneChassis id :Manage address domain : 0.0Manage address :Autodetected : No

C1|S12|L1D>show soam mep cc mep-id 30 local-parent-id 11MEP ID : 30MD Local ID : 11MD level : 0MD name : UNIbcMD

Remote MEP ID : 40State : OKTimeStamp : 75890.96 secMAC : 00:C0:F2:42:00:DFRDI BIT : FalsePort Status : No Port StateInterface Status : No Interface StatusChassis id subtype : NoneChassis id :Manage address domain : 0.0Manage address :Autodetected : No

C1|S12|L1D>

2.3 Configuration from CLI of Device C

C1|S6|L1D>### DEVICE C ###C1|S6|L1D>show soam mdLocal MD ID Name Level MAs MIPs Permission-----------------------------------------------------------

3 OperatorMD 3 1 1 none6 ProviderMD 6 1 1 none

11 UNIbcMD 0 1 0 none111 UNIcdMD 0 1 0 none

C1|S6|L1D>show soam maMA index : 3MD index : 3MD level : 3MD name : OperatorMDMA name : OperatorCTag100CCM interval : 1sMEPs : 1MEP ID list : (2 MepIds) 310 320Permission : deferVLAN ID list : ctype: 100Primary VLAN ID : 100Auto detection timeout : 4000Auto detect remote MEP : disabled

MA index : 6MD index : 6MD level : 6MD name : ProviderMDMA name : ProviderCTag200CCM interval : 1sMEPs : 0MEP ID list : (0 MepIds)Permission : deferVLAN ID list : ctype: 200Primary VLAN ID : 200Auto detection timeout : 4000Auto detect remote MEP : disabled

MA index : 11MD index : 11MD level : 0MD name : UNIbcMDMA name : UNIbcUntaggedCCM interval : 1sMEPs : 1MEP ID list : (2 MepIds) 30 40Permission : deferVLAN ID list : noneAuto detection timeout : 4000Auto detect remote MEP : disabled

MA index : 111MD index : 111

MD level : 0MD name : UNIcdMDMA name : UNIcdUntaggedCCM interval : 1sMEPs : 1MEP ID list : (2 MepIds) 50 60Permission : deferVLAN ID list : noneAuto detection timeout : 4000Auto detect remote MEP : disabled

C1|S6|L1D>show soam mip configMIP id : 312MD local ID : 3MD level : 3MD name : OperatorMDVLANs : ctype: 100Port : 1Admin status : enabled

MIP id : 612MD local ID : 6MD level : 6MD name : ProviderMDVLANs : ctype: 200Port : 2Admin status : enabled

C1|S6|L1D>show soam mep configMEP id : 320MD local ID : 3MD level : 3MD name : OperatorMDMA local ID : 3MA name : OperatorCTag100Direction : upPort : 2VLANs : ctype: 100Primary VLAN : 100Admin status : enabledCCI status : enabledFault notification state : ResetDefects :Next LTM transaction ID : 1Next LBM transaction ID : 1CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxcon

MEP id : 40MD local ID : 11MD level : 0MD name : UNIbcMDMA local ID : 11MA name : UNIbcUntaggedDirection : down

Port : 1VLANs : nonePrimary VLAN : 0Admin status : enabledCCI status : enabledFault notification state : ResetDefects :Next LTM transaction ID : 1Next LBM transaction ID : 1CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxcon

MEP id : 50MD local ID : 111MD level : 0MD name : UNIcdMDMA local ID : 111MA name : UNIcdUntaggedDirection : downPort : 2VLANs : nonePrimary VLAN : 0Admin status : enabledCCI status : enabledFault notification state : ResetDefects :Next LTM transaction ID : 1Next LBM transaction ID : 1CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxcon

C1|S6|L1D>C1|S6|L1D>show soam mep cc mep-id 320 local-parent-id 3MEP ID : 320MD Local ID : 3MD level : 3MD name : OperatorMD


C1|S6|L1D>show soam mep cc mep-id 40 local-parent-id 11MEP ID : 40

MD Local ID : 11MD level : 0MD name : UNIbcMD


C1|S6|L1D>show soam mep cc mep-id 50 local-parent-id 111MEP ID : 50MD Local ID : 111MD level : 0MD name : UNIcdMD

C1|S6|L1D>

2.4 Configuration from CLI of Device D

C1|S6|L1AP2|L2D>#### DEVICE D ###C1|S6|L1AP2|L2D>show soam mdLocal MD ID Name Level MAs MIPs Permission-----------------------------------------------------------

6 ProviderMD 6 1 0 none111 UNIcdMD 0 1 0 none

C1|S6|L1AP2|L2D>show soam maMA index : 6MD index : 6MD level : 6MD name : ProviderMDMA name : ProviderCTag200CCM interval : 1sMEPs : 1MEP ID list : (2 MepIds) 610 620Permission : deferVLAN ID list : ctype: 200Primary VLAN ID : 200Auto detection timeout : 4000Auto detect remote MEP : disabled

MA index : 111MD index : 111MD level : 0MD name : UNIcdMDMA name : UNIcdUntaggedCCM interval : 1sMEPs : 1MEP ID list : (2 MepIds) 50 60Permission : deferVLAN ID list : noneAuto detection timeout : 4000Auto detect remote MEP : disabled

C1|S6|L1AP2|L2D>show soam mip configThe MIPs table is empty.

C1|S6|L1AP2|L2D>show soam mep configMEP id : 620MD local ID : 6MD level : 6MD name : ProviderMDMA local ID : 6MA name : ProviderCTag200Direction : downPort : 2VLANs : ctype: 200Primary VLAN : 200Admin status : enabledCCI status : enabledFault notification state : Reset

Defects :Next LTM transaction ID : 1Next LBM transaction ID : 1CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxcon

MEP id : 60MD local ID : 111MD level : 0MD name : UNIcdMDMA local ID : 111MA name : UNIcdUntaggedDirection : downPort : 2VLANs : nonePrimary VLAN : 0Admin status : enabledCCI status : enabledFault notification state : ResetDefects :Next LTM transaction ID : 1Next LBM transaction ID : 1CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxcon

C1|S6|L1AP2|L2D>C1|S6|L1AP2|L2D>C1|S6|L1AP2|L2D>show soam mep cc mep-id 620 local-parent-id 6MEP ID : 620MD Local ID : 6MD level : 6MD name : ProviderMD


C1|S6|L1AP2|L2D>show soam mep cc mep-id 60 local-parent-id 111MEP ID : 60MD Local ID : 111MD level : 0MD name : UNIcdMD

Remote MEP ID : 50

State : OKTimeStamp : 3853.31 secMAC : 00:C0:F2:42:00:E0RDI BIT : FalsePort Status : No Port StateInterface Status : No Interface StatusChassis id subtype : NoneChassis id :Manage address domain : 0.0Manage address :Autodetected : No

C1|S6|L1AP2|L2D>

3 Y.1731 Test Configuration

A B C D

ProviCTag600Y (MEG Level=6, MEG ID=600, c-vid=600)

OperCTag300Y (MEG Level = 3, MEG ID=300, c-vid=300)

UNIabUntagY(MEG Level=0,MEG ID=10)

MIP Down MEP Up MEP

CPE

CPE

Customer MEG (L=7)

UNIbcUntagY(MEG Level=0,

MEG ID=20)

UNIcdUntagY(MEG Level=0,MEG ID=30)

61 63 64 62

31 3233 34

11 12 13 14 15 16

******************************************* Y.1731 ( All MEGs on different CTAGs) *******************************************

## Device A ################################

## Level 0 UNI ##

add soam meg local-meg-id 10 meg-name UNIabUntagY meg-level 0 vlan-typenone

set soam meg local-meg-id 10 attr_name mepid-add attr_value 11





## Level 6 Provider MD ##

add soam meg local-meg-id 600 meg-name ProvCTag600Y meg-level 6 vlan-type ctype 600






set soam mep config mep-id 61 local-parent-id 600 attr_name aisprocessattr_value enable

## Device B ################################

## Level 0 UNI ##add soam meg local-meg-id 10 meg-name UNIabUntagY meg-level 0 vlan-typenone






## Level 0 UNI ##add soam meg local-meg-id 20 meg-name UNIbcUntagY meg-level 0 vlan-typenone







set soam mep config mep-id 13 local-parent-id 20 attr_name aisnotifyupattr_value enable

set soam mep config mep-id 13 local-parent-id 20 attr_name aistransmitattr_value enable

set soam mep config mep-id 13 local-parent-id 20 attr_name aisclient-add attr_value MIP33

## Level 3 Operator MD ##add soam meg local-meg-id 300 meg-name OperCTag300Y meg-level 3 vlan-type ctype 300







set soam mep config mep-id 31 local-parent-id 300 attr_name aisnotifyupattr_value enableset soam mep config mep-id 31 local-parent-id 300 attr_name aistransmitattr_value enable


add soam mip mip-type y.1731 local-mip-id 33 local-parent-id 300 port 1


set soam mip local-mip-id 33 attr-name aistransmit attr-val enable

## Level 6 Provider MD ##add soam meg local-meg-id 600 meg-name ProvCTag600Y meg-level 6 vlan-type ctype 600




## Device C ################################## Level 0 UNI ##add soam meg local-meg-id 20 meg-name UNIbcUntagY meg-level 0 vlan-typenone










## Level 0 UNI ##add soam meg local-meg-id 30 meg-name UNIcdUntagY meg-level 0 vlan-typenone






## Level 3 Operator MD ##add soam meg local-meg-id 300 meg-name OperCTag300Y meg-level 3 vlan-type ctype 300




## Device D ################################## Level 0 UNI ##add soam meg local-meg-id 30 meg-name UNIcdUntagY meg-level 0 vlan-typenone













3.1 Configuration from CLI of Device A

C1|S12|L1AP2|L2D>### DEVICE A ####C1|S12|L1AP2|L2D>show soam megMEG index : 10MEG level : 0MEG name : UNIabUntagYCCM interval : 1sMEPs : 1MIPs : 0MEP ID list : (2 MepIds) 11 12Permission : noneVLAN ID list : noneAuto detection timeout : 4000Auto detect remote MEP : disabledCCI interworking : disabled

MEG index : 600MEG level : 6MEG name : ProvCTag600YCCM interval : 1sMEPs : 1MIPs : 0MEP ID list : (2 MepIds) 61 62Permission : noneVLAN ID list : ctype: 600Primary VLAN ID : 600Auto detection timeout : 4000Auto detect remote MEP : disabledCCI interworking : disabled

C1|S12|L1AP2|L2D>show soam mep configMEP id : 11MEG local ID : 10MEG level : 0MEG name : UNIabUntagYDirection : downPort : 2VLANs : nonePrimary VLAN : 0Admin status : enabledCCI status : enabledFault notification state : ResetDefects :Next LTM transaction ID : 1Next LBM transaction ID : 1CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxconAIS transmit : disabledAIS interval : 1 secondAIS process : disabledAIS notify up : disabledAIS client list : (0 MEPs, 0 MIPs)

AIS frame priority : 1

MEP id : 61MEG local ID : 600MEG level : 6MEG name : ProvCTag600YDirection : downPort : 2VLANs : ctype: 600Primary VLAN : 600Admin status : enabledCCI status : enabledFault notification state : ResetDefects :Next LTM transaction ID : 1Next LBM transaction ID : 1CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxconAIS transmit : disabledAIS interval : 1 secondAIS process : enabledAIS notify up : disabledAIS client list : (0 MEPs, 0 MIPs)AIS frame priority : 1

C1|S12|L1AP2|L2D>show soam mip configThe MIPs table is empty.C1|S12|L1AP2|L2D>C1|S12|L1AP2|L2D>show soam mep cc mep-id 11 local-parent-id 10MEP ID : 11MEG Local ID : 0MEG level : 0MEG name : UNIabUntagY


C1|S12|L1AP2|L2D>show soam mep cc mep-id 61 local-parent-id 600MEP ID : 61MEG Local ID : 0MEG level : 6MEG name : ProvCTag600Y

Remote MEP ID : 62State : OK

TimeStamp : 3644.96 secMAC : 00:C0:F2:42:01:8ERDI BIT : FalsePort Status : No Port StateInterface Status : No Interface StatusChassis id subtype : NoneChassis id :Manage address domain : 0.0Manage address :Autodetected : No

3.2 Configuration from CLI of Device B

C1|S12|L1D>### DEVICE B ####C1|S12|L1D>C1|S12|L1D>show soam megMEG index : 10MEG level : 0MEG name : UNIabUntagYCCM interval : 1sMEPs : 1MIPs : 0MEP ID list : (2 MepIds) 11 12Permission : noneVLAN ID list : noneAuto detection timeout : 4000Auto detect remote MEP : disabledCCI interworking : disabled

MEG index : 20MEG level : 0MEG name : UNIbcUntagYCCM interval : 1sMEPs : 1MIPs : 0MEP ID list : (2 MepIds) 13 14Permission : noneVLAN ID list : noneAuto detection timeout : 4000Auto detect remote MEP : disabledCCI interworking : disabled

MEG index : 300MEG level : 3MEG name : OperCTag300YCCM interval : 1sMEPs : 1MIPs : 1MEP ID list : (2 MepIds) 31 32Permission : noneVLAN ID list : ctype: 300Primary VLAN ID : 300Auto detection timeout : 4000Auto detect remote MEP : disabledCCI interworking : disabled

MEG index : 600MEG level : 6MEG name : ProvCTag600YCCM interval : 1sMEPs : 0MIPs : 1MEP ID list : (0 MepIds)Permission : noneVLAN ID list : ctype: 600Primary VLAN ID : 600

Auto detection timeout : 4000Auto detect remote MEP : disabledCCI interworking : disabled

C1|S12|L1D>show soam mep configMEP id : 12MEG local ID : 10MEG level : 0MEG name : UNIabUntagYDirection : downPort : 2VLANs : nonePrimary VLAN : 0Admin status : enabledCCI status : enabledFault notification state : ResetDefects :Next LTM transaction ID : 1Next LBM transaction ID : 1CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxconAIS transmit : disabledAIS interval : 1 secondAIS process : disabledAIS notify up : disabledAIS client list : (0 MEPs, 0 MIPs)AIS frame priority : 1

MEP id : 13MEG local ID : 20MEG level : 0MEG name : UNIbcUntagYDirection : downPort : 1VLANs : nonePrimary VLAN : 0Admin status : enabledCCI status : enabledFault notification state : ResetDefects :Next LTM transaction ID : 1Next LBM transaction ID : 1CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxconAIS transmit : enabledAIS interval : 1 secondAIS process : enabledAIS notify up : enabledAIS client list : (0 MEPs, 1 MIPs) MIP33AIS frame priority : 1

MEP id : 31MEG local ID : 300

MEG level : 3MEG name : OperCTag300YDirection : upPort : 2VLANs : ctype: 300Primary VLAN : 300Admin status : enabledCCI status : enabledFault notification state : ResetDefects :Next LTM transaction ID : 1Next LBM transaction ID : 1CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxconAIS transmit : enabledAIS interval : 1 secondAIS process : enabledAIS notify up : enabledAIS client list : (0 MEPs, 1 MIPs) MIP63AIS frame priority : 1

C1|S12|L1D>show soam mip configMIP id : 33MEG local ID : 300MEG level : 3MEG name : OperCTag300YVLANs : ctype: 300Port : 1Admin status : enabledAIS transmit : enabledAIS interval : 1 secondAIS frame priority : 7

MIP id : 63MEG local ID : 600MEG level : 6MEG name : ProvCTag600YVLANs : ctype: 600Port : 2Admin status : enabledAIS transmit : enabledAIS interval : 1 secondAIS frame priority : 7

C1|S12|L1D>show soam mep cc mep-id 31 local-parent-id 300MEP ID : 31MEG Local ID : 0MEG level : 3MEG name : OperCTag300Y

Remote MEP ID : 32State : OKTimeStamp : 3408.97 secMAC : 00:C0:F2:42:00:E0RDI BIT : False

Port Status : No Port StateInterface Status : No Interface StatusChassis id subtype : NoneChassis id :Manage address domain : 0.0Manage address :Autodetected : No

C1|S12|L1D>show soam mep cc mep-id 12 local-parent-id 10MEP ID : 12MEG Local ID : 0MEG level : 0MEG name : UNIabUntagY


C1|S12|L1D>show soam mep cc mep-id 13 local-parent-id 20MEP ID : 13MEG Local ID : 0MEG level : 0MEG name : UNIbcUntagY

Remote MEP ID : 14State : OKTimeStamp : 399543.9 secMAC : 00:C0:F2:42:00:DFRDI BIT : FalsePort Status : No Port StateInterface Status : No Interface StatusChassis id subtype : NoneChassis id :Manage address domain : 0.0Manage address :Autodetected : No

C1|S12|L1D>

3.3 Configuration from CLI of Device C

C1|S6|L1D>### DEVICE C ####C1|S6|L1D>C1|S6|L1D>show soam megMEG index : 20MEG level : 0MEG name : UNIbcUntagYCCM interval : 1sMEPs : 1MIPs : 0MEP ID list : (2 MepIds) 13 14Permission : noneVLAN ID list : noneAuto detection timeout : 4000Auto detect remote MEP : disabledCCI interworking : disabled

MEG index : 30MEG level : 0MEG name : UNIcdUntagYCCM interval : 1sMEPs : 1MIPs : 0MEP ID list : (2 MepIds) 15 16Permission : noneVLAN ID list : noneAuto detection timeout : 4000Auto detect remote MEP : disabledCCI interworking : disabled

MEG index : 300MEG level : 3MEG name : OperCTag300YCCM interval : 1sMEPs : 1MIPs : 1MEP ID list : (2 MepIds) 31 32Permission : noneVLAN ID list : ctype: 300Primary VLAN ID : 300Auto detection timeout : 4000Auto detect remote MEP : disabledCCI interworking : disabled

MEG index : 600MEG level : 6MEG name : ProvCTag600YCCM interval : 1sMEPs : 0MIPs : 1MEP ID list : (0 MepIds)Permission : noneVLAN ID list : ctype: 600Primary VLAN ID : 600

Auto detection timeout : 4000Auto detect remote MEP : disabledCCI interworking : disabled

C1|S6|L1D>show soam mep configMEP id : 14MEG local ID : 20MEG level : 0MEG name : UNIbcUntagYDirection : downPort : 1VLANs : nonePrimary VLAN : 0Admin status : enabledCCI status : enabledFault notification state : ResetDefects :Next LTM transaction ID : 1Next LBM transaction ID : 1CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxconAIS transmit : enabledAIS interval : 1 secondAIS process : enabledAIS notify up : enabledAIS client list : (0 MEPs, 1 MIPs) MIP34AIS frame priority : 1

MEP id : 15MEG local ID : 30MEG level : 0MEG name : UNIcdUntagYDirection : downPort : 2VLANs : nonePrimary VLAN : 0Admin status : enabledCCI status : enabledFault notification state : ResetDefects :Next LTM transaction ID : 1Next LBM transaction ID : 1CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxconAIS transmit : disabledAIS interval : 1 secondAIS process : disabledAIS notify up : disabledAIS client list : (0 MEPs, 0 MIPs)AIS frame priority : 1

MEP id : 32MEG local ID : 300

MEG level : 3MEG name : OperCTag300YDirection : upPort : 2VLANs : ctype: 300Primary VLAN : 300Admin status : enabledCCI status : enabledFault notification state : ResetDefects :Next LTM transaction ID : 1Next LBM transaction ID : 1CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxconAIS transmit : enabledAIS interval : 1 secondAIS process : enabledAIS notify up : enabledAIS client list : (0 MEPs, 1 MIPs) MIP64AIS frame priority : 1

C1|S6|L1D>show soam mip configMIP id : 34MEG local ID : 300MEG level : 3MEG name : OperCTag300YVLANs : ctype: 300Port : 1Admin status : enabledAIS transmit : enabledAIS interval : 1 secondAIS frame priority : 7

MIP id : 64MEG local ID : 600MEG level : 6MEG name : ProvCTag600YVLANs : ctype: 600Port : 2Admin status : enabledAIS transmit : enabledAIS interval : 1 secondAIS frame priority : 7

C1|S6|L1D>show soam mep cc mep-id 32 local-parent-id 300MEP ID : 32MEG Local ID : 0MEG level : 3MEG name : OperCTag300Y

Remote MEP ID : 31State : OKTimeStamp : 258076.32 secMAC : 00:C0:F2:20:E2:18RDI BIT : False

Port Status : No Port StateInterface Status : No Interface StatusChassis id subtype : NoneChassis id :Manage address domain : 0.0Manage address :Autodetected : No

C1|S6|L1D>show soam mep cc mep-id 14 local-parent-id 20MEP ID : 14MEG Local ID : 0MEG level : 0MEG name : UNIbcUntagY


C1|S6|L1D>show soam mep cc mep-id 15 local-parent-id 30MEP ID : 15MEG Local ID : 0MEG level : 0MEG name : UNIcdUntagY

Remote MEP ID : 16State : OKTimeStamp : 172726.51 secMAC : 00:C0:F2:42:01:8ERDI BIT : FalsePort Status : No Port StateInterface Status : No Interface StatusChassis id subtype : NoneChassis id :Manage address domain : 0.0Manage address :Autodetected : No

C1|S6|L1D>

3.4 Configuration from CLI of Device D

C1|S6|L1AP2|L2D>### DEVICE D ###C1|S6|L1AP2|L2D>C1|S6|L1AP2|L2D>show soam megMEG index : 30MEG level : 0MEG name : UNIcdUntagYCCM interval : 1sMEPs : 1MIPs : 0MEP ID list : (2 MepIds) 15 16Permission : noneVLAN ID list : noneAuto detection timeout : 4000Auto detect remote MEP : disabledCCI interworking : disabled

MEG index : 600MEG level : 6MEG name : ProvCTag600YCCM interval : 1sMEPs : 1MIPs : 0MEP ID list : (2 MepIds) 61 62Permission : noneVLAN ID list : ctype: 600Primary VLAN ID : 600Auto detection timeout : 4000Auto detect remote MEP : disabledCCI interworking : disabled

C1|S6|L1AP2|L2D>show soam mep configMEP id : 16MEG local ID : 30MEG level : 0MEG name : UNIcdUntagYDirection : downPort : 2VLANs : nonePrimary VLAN : 0Admin status : enabledCCI status : enabledFault notification state : ResetDefects :Next LTM transaction ID : 1Next LBM transaction ID : 1CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxconAIS transmit : disabledAIS interval : 1 secondAIS process : disabledAIS notify up : disabled

AIS client list : (0 MEPs, 0 MIPs)AIS frame priority : 1

MEP id : 62MEG local ID : 600MEG level : 6MEG name : ProvCTag600YDirection : downPort : 2VLANs : ctype: 600Primary VLAN : 600Admin status : enabledCCI status : enabledFault notification state : ResetDefects :Next LTM transaction ID : 2Next LBM transaction ID : 2CCM and LTM priority : 7Fault Alarm Detect Time : 2500 msFault Alarm Reset Time : 10000 msLowest Alarm priority : macremerrxconAIS transmit : disabledAIS interval : 1 secondAIS process : enabledAIS notify up : disabledAIS client list : (0 MEPs, 0 MIPs)AIS frame priority : 1

C1|S6|L1AP2|L2D>show soam mip configThe MIPs table is empty.C1|S6|L1AP2|L2D>C1|S6|L1AP2|L2D>show soam mep cc mep-id 62 local-parent-id 600MEP ID : 62MEG Local ID : 0MEG level : 6MEG name : ProvCTag600Y


C1|S6|L1AP2|L2D>show soam mep cc mep-id 16 local-parent-id 30MEP ID : 16MEG Local ID : 0MEG level : 0MEG name : UNIcdUntagY

Remote MEP ID : 15

State : OKTimeStamp : 20030.83 secMAC : 00:C0:F2:42:00:E0RDI BIT : FalsePort Status : No Port StateInterface Status : No Interface StatusChassis id subtype : NoneChassis id :Manage address domain : 0.0Manage address :Autodetected : No

soam test configuration...this configuration will allow testing of y.1731 (up-meps, down-meps, mip,...

Documents