sludge receiving station in stainless steel › ... › uploads › 2016 › 04 ›...

4
Sludge Receiving Station in Stainless Steel SRS Main areas of use and features • Receiving station for mechanical treatment of septic sludge from tank lorries. • Self-cleaning Rotoscreen with a following screw wash press. • Capacity of 1-4 m3 /min. • Can be combined with a sedimentation tank. • Add on pinch valve and flow meter. • High surface finish guarantees a long lifetime.

Upload: others

Post on 04-Jul-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Sludge Receiving Station in Stainless Steel › ... › uploads › 2016 › 04 › S1134-SRS-br… · Meva Sludge Receiving Station SRS is used for mechanical treatment of septic

Sludge Receiving Station in Stainless SteelSRS

Main areas of use and features• Receiving station for mechanical treatment of septic

sludge from tank lorries.• Self-cleaning Rotoscreen with a following screw

wash press.• Capacity of 1-4 m3 /min.

• Can be combined with a sedimentation tank.• Add on pinch valve and flow meter.• High surface finish guarantees a long lifetime.

Page 2: Sludge Receiving Station in Stainless Steel › ... › uploads › 2016 › 04 › S1134-SRS-br… · Meva Sludge Receiving Station SRS is used for mechanical treatment of septic

SRS SLUDGE RECEIVING STATIONArea of use Meva Sludge Receiving Station SRS is used for mechanical treatment of septic sludge from tank lorries. Meva SRS consists of a Meva Rotoscreen and a Meva Screw Wash Press.

The equipment is delivered in an already assembled, compact tank in stainless steel. The result is a versatile and efficient solution with high reliability.

The sludge receiving station delivers a clean and dry sludge, resulting in reduced sludge volume meaning reduced transport- and deposit costs.

FunctionSludge is fed into the tank and led through the Meva Rotoscreen, where it is cleaned from solids. Thereafter, the screenings are washed, dewatered and pressed in a screw wash press. The washed and dewatered screenings are transported to a container by a discharge pipe or an optional Counter Pressure Screw CPS.

The entire treatment process takes place in a compact, enclosed system which reduces common odour problems to a minimum.

The fine screen can be equipped with a spray bar to increase the screening efficiency. Meva Rotoscreen is insensitive to grease, rags and sand and therefore well suited for receiving sludge. It can be supplied with a 3 or 6 mm slot width.

Page 3: Sludge Receiving Station in Stainless Steel › ... › uploads › 2016 › 04 › S1134-SRS-br… · Meva Sludge Receiving Station SRS is used for mechanical treatment of septic

Meva Sludge Receiving Station SRS:

• Receiving station for mechanical treatment of septic sludge from tank lorries.

• Self -cleaning Rotoscreen with a following screw wash

press.

• Capacity of 1-4 m3 /min.

• Can be combined with a sedimentation tank.

• Add on pinch valve and flow meter.

• High finish guarantees a long lifetime.

Meva SRS: Effective, compact, capsulated

No odour problems due to the capsulated system

Meva SRS with an automated grit trap. Screen connected to SWP and CPS.

Page 4: Sludge Receiving Station in Stainless Steel › ... › uploads › 2016 › 04 › S1134-SRS-br… · Meva Sludge Receiving Station SRS is used for mechanical treatment of septic

S113

4-En

-19.

07

Nordic Water Products AB • Alfagatan 5 • SE-431 49 Mölndal • SwedenTel: +46 31 748 54 00 • [email protected] • www.nordicwater.com