sl 8 edition catalogue

The new dimension for economic machining

Superline

Drilling

Special tooling SolutionS

Milling

Modular tooling systeMs

tool restoration service

Reaming pcd/pcbTapping/Thread milling/fluTeless Tapping

Countersinking/de-burning

8th EditionSuperline

Guhring Ltd.Castle Bromwich Business Park, Tameside Drive,Birmingham B35 7AG

Telephone: 0121 749 5544Fax: 0121 776 7224 www.guhring.co.uk

No liability can be accepted for printing errors or technical changes of any kind.Our Conditions of Sale and Terms of Payment apply. Available on request.

1118

-VII-

05 •

Pri

nte

d in

Ger

man

y •

2011

2 SuperLine

SuperLine is the optimal range of high-tech tools for machining the following operations• drilling• tapping• milling• reaming

What is superLine?

SL quality – offers highest accuracy and process reliability! This is the result of our major investment. Therefore the new manufacturing procedures have been implemented according to DIN ISO 9001 and VDA 6.4. This is what our employees are trained for.

All SL tools are produced in ultra fine Guhring carbide or carefully selected high performance high speed steel. Add to this a majority coating with our well proven, versatile multilayer FIRE coating or application orientated surface finishes from bright to TiCN or TiAlN nanoA.

The efficiency of tool material and coating complement the proven and tested cutting edge geometries.

… in quaLity

3SuperLine

We produce SL-tools in large batches on completely new precision grinding machines developed by us. The extremely high productivity achieved with this manufacturing concept brings cost advantages that are fully passed on to our customers. Added to the guaranteed high SL quality, you will gain cost-efficiency that cannot be matched.

… in cost-efficiency

… in avaiLabiLityExcellent availability of SL-tools from stock, i.e. call or fax today and apply tomorrow, this is our SL motto. It must be experienced to be believed – on a daily basis.

4 SuperLine

Wornregrinding recoating

We support our SL-tools beyond the initial sale and the successful application. We look after SL-tools for their entire life. Regrinding and recoating – all this is part of our service. And who is more competent than the tool manufacturer?!

The tools can be sent to us by courier or our own logistics service can collect and deliver the tools.

… in tooL LifeWe are convinced, that the SuperLine program is the best offer at the right time. Test the quality, compare the prices. Take advantage of the exceptional advantages of SuperLine.

5SuperLine

SL range summary

SL drillsSummary page 6Standard range page 14GuhringNavigator page 46

SL milling cuttersSummary page 8Standard range page 50GuhringNavigator page 70

SL taps and fluteless tapsSummary page 10Standard range page 74

Ordering possibilitiesStandard rangeTools from the standard range are illustrated in bold in this catalogue. For most cutting tasks they provide an extremely economical solution. They are available immediately.

Obsolete rangeProducts that have small or no demand are listed in our obsolete range and illustrated in light in the catalogue. They are available only as long as the product is in stock. If products from the obso-lete range are out of stock, production readiness with short delivery is provided in the form of a special tool order. Prices available on request.

Packaging detailTool group Standard Units per package

Solid carbide twist drills all DIN standards and Guhring standards

all sizes supplied 1 unit per package

Solid carbide milling cutters and reamers

all DIN standards and Guhring standards

all sizes supplied 1 unit per package

High speed steel twist drills DIN 1897DIN 338DIN 340

≤ 7.5 mm packed in units of 10 > 7.5 … 10.6 mm packed in units of 5 > 10.6 mm 1 unit per package

High speed steel taps and fluteless taps

DIN 371 ≤ M6 packed in units of 10> M6 1 unit per package

SL reamersSummary page 11Standard range page 83GuhringNavigator page 86

6 SuperLine

GuhringNavigator drilling tools 46

SL range summary

Ratio drills

3-flute Ratio drills

SL drills

Standard(DIN)

Type Shankform

Drilling depth

Tool illustration Toolmaterial

Carbidegrade

Surface Internal cooling

Ø-rangemm

Guhr. no.

Page

DIN6537short

RT100U HA

3 x D Carb.-UF K/P

– 3.00...20.00 5514 14

RT100U HE – 3.00...16.00 5614 14

RT100U HA 3.00...20.00 5510 14

RT100U HE 3.00...20.00 5610 14

RT100VA HA 3.00...20.00 8510 14

RT100VA HE 3.00...20.00 8610 14

DIN6537long

RT100U HA

5 x D Carb.-UF K/P

– 3.00...20.00 5515 18

RT100U HE – 3.00...16.00 5615 18

RT100U HA 3.00...20.00 5511 18

RT100U HE 3.00...20.00 5611 18

RT100VA 3.00...20.00 8511 18

RT100VA 3.00...20.00 8611 18

Guhring std.

RT100U

HA

7 x D Carb.-UF K/P

4.00...20.00 5512 23

HE 4.00...20.00 5612 23

Guhring std.

RT100HA 12 x D Carb.-UF K/P 4.00...20.00 5525 26

Guhring std.

RT150GG HA 10 x D Carb.-UF K 3.00...16.00 5513 29

DIN6537long

FT200 HA 5 x D Carb.-UF K – 3.00...20.00 5518 30

bright FIRE TiAlN nanoA tool with internal cooling

7SuperLine

GuhringNavigator drilling tools 46

Carbide twist drills

High speed steel twist drills

SL drills

Standard(DIN)

Type Shankform

Drilling depth

Tool illustration Toolmaterial

Carbidegrade

Surface Internal cooling

Ø-rangemm

Guhr. no.

Page

DIN 6539 N – 3 x D Carb.-UF K – 1.50…12.00 5516 32

Guhring std. N – 5 x D Carb.-UF K – 2.00...12.00 5517 33

bright TiN tool with internal cooling

DIN 1897

GU500 DZ – 3 x D HSCO – – 1.00…14.00 5524 34

GU500 DZ – 3 x D HSCO – – 1.00…14.00 5520 34

GT500 DZ – 3 x D PM HSS-E – – 1.00…14.00 5521 34

DIN338 N – 5 x D HSS – – 1.00…16.00 9651 37

DIN 338

GU500 DZ – 5 x D HSCO – – 1.00…14.00 5523 37

GU500 DZ – 5 x D HSCO – – 1.00…14.00 5519 37

GT500 DZ – 5 x D PM HSS-E – – 1.00…14.00 5522 37

DIN 340

GU500 DZ – 10 x D HSCO – – 1.00…14.00 5536 42

GU500 DZ – 10 x D HSCO – – 1.00…14.00 5537 42

DIN 338

GU500 DZ – 5 x D Sets of Guhring no. 5523 HSCO – – – 201 45

DIN 338 N – 5 x D Sets of Guhring no. 9651 HSS – – – 201 45

8 SuperLine

Ratio end mills RF 100

SL milling cutters

GuhringNavigator milling cutters 70

bright FIRE

Mini-Slot drills

Slot drills and ball nose slot drills (2-fluted)

Guhring std.short – N h10 3-

fluted Carb.-UF K/P 0.50...20.00 5573 55

Guhring std.short – N h10 3-

fluted Carb.-UF K/P 1.00...10.00 5574 56

DIN Form Type Tolerance on

cutting-Ø

Tool illustration No. of cutting edges

Tool material

Carbidegrade

Surface Ø-rangemm

Guhr. no.

Page

DIN 6537short HB N h10 4-

fluted Carb.-UF K/P 6.00...20.00 5534 51

DIN 6527 long HA N h10 4-

fluted Carb.-UF K/P 4.00...25.00 5735 52

DIN 6527 long HB N h10 4-

fluted Carb.-UF K/P 4.00...25.00 5535 52

Guhring std. HA N h10 4-fluted Carb.-UF K/P 10.00...25.00 5582 54


fluted Carb.-UF K/P 0.50...20.00 5585 57


fluted Carb.-UF K/P 4.00...12.00 5533 57


fluted Carb.-UF K/P 2.00...20.00 5730 58


fluted Carb.-UF K/P 2.00...20.00 5530 58

Guhring std. HA N h10 2-fluted Carb.-UF K/P 3.00...20.00 5549 59

DIN 6527 short HA W e8 2-

fluted Carb.-UF K 3.00...20.00 5742 59

DIN 6527 short HB W e8 2-

fluted Carb.-UF K 3.00...20.00 5542 59

DIN 6527 long HA W e8 2-

fluted Carb.-UF K 3.00...20.00 5743 60

DIN 6527 long HB W e8 2-

fluted Carb.-UF K 3.00...20.00 5543 60

SL range summary

9SuperLine

Slot drills (3-fluted)

End mills

SL milling cutters

bright FIRE

GuhringNavigator milling cutters 70

DIN Form Type Tolerance on

cutting-Ø

Tool illustration No. of cutting edges

Tool material

Carbidegrade

Surface Ø-rangemm

Guhr. no Page

DIN 6527 short HA NH h10 3-

fluted Carb.-UF K/P 3.00...20.00 5505 61

DIN 6527 short HB NH h10 3-

fluted Carb.-UF K/P 3.00...20.00 5502 61


fluted Carb.-UF K/P 2.00...20.00 5507 62


fluted Carb.-UF K/P 2.00...20.00 5531 62

DIN 6527 long HA NH h10 3-

fluted Carb.-UF K/P 3.00...20.00 5506 63

DIN 6527 long HB NH h10 3-

fluted Carb.-UF K/P 3.00...20.00 5546 63

DIN 6527 long HB WR h10 3-

fluted Carb.-UF K 8.00...20.00 5544 63


fluted Carb.-UF K/P 3.00...20.00 5584 64


fluted Carb.-UF K/P 2.00...20.00 5532 65

Guhring std.short HA N h10 4-

fluted Carb.-UF K/P 3.00...20.00 5556 66

DIN 6527 long HA NH h10 multi-

fluted Carb.-UF K/P 3.00...25.00 5745 67

DIN 6527 long HB NH h10 multi-

fluted Carb.-UF K/P 6.00...20.00 5545 67

Guhring std. HA NH h10 multi-fluted Carb.-UF K/P 6.00...20.00 5729 68

Guhring std. HB NH h10 multi-fluted Carb.-UF K/P 6.00...20.00 5529 68

DIN 6527 long HB NRf h10 4-

fluted Carb.-UF K/P 6.00...20.00 5504 69

DIN 6527 long HB HR h10 4-

fluted DK 500-UF K/P 6.00...20.00 5583 69

10 SuperLine

DIN Type Form Tolerance zone

Tool illustrationand colour ring code

Toolmaterial

Sur-face

Thread range

Guhring no.

Page

DIN371 N B ISO 2 / 6H HSS-E M3 … M10 5560 74

DIN371 N B ISO 2 / 6H HSS-E S M3 … M8 5590 74

DIN371 H B ISO 2 / 6H HSS-E M3 … M10 5558 74

DIN371 H B ISO 2 / 6H HSS-E C M3 … M10 5587 74

DIN371 VA B ISO 2 / 6H PM HSS-E M3 … M10 5559 74

DIN371 VA B ISO 2 / 6H HSS-E S M3 … M10 5588 74


DIN371 N B ISO 2 / 6H HSS-E S M3 … M10 5586 75

DIN371 Al B ISO 2 / 6H HSS-E M3 … M10 5557 75

DIN371 GG C ISO 2 / 6H HSS-E M3 … M10 5550 75

DIN371 GG C 6HX HSS-E A M3 … M10 5595 75


for through holes

SL machine taps

~DIN371 N C 6HX HSS-E S M3 … M10 5598 77

~DIN376 N C 6HX

HSS-E S M12 … M16 5599 78

SCAbright steam tempered nitrided TiAIN TiCN TiN

SL Fluteless Taps for through and blind holes

SL range summary

11SuperLine

for blind holes

SL machine taps

for cast-materials

for Al and Al-alloys

for high tensile mat. 800...1200 N/mm2

for stainless andacid resistant steels

for general steels≤ 800 N/mm2

for universal applications≤ 1000 N/mm2

DINs Type Form Tolerance zone

Tool illustrationand colour ring code

Toolmaterial

Sur-face

Thread range

Guhring no.

Page

DIN371 N R40 C ISO 2 / 6H HSS-E M3 … M10 5554 79

DIN371 N R40 C ISO 2 / 6H HSS-E S M3 … M10 5592 79


DIN371 N R40 C ISO 2 / 6H HSS-E C M3 … M8 5591 79

DIN371 VA R40 C ISO 2 / 6H HSS-E M3 … M10 5553 80

DIN371 VA R40 C ISO 2 / 6H HSS-E S M3 … M10 5596 80


DIN371 N R40 C ISO 2 / 6H HSS-E S M3 … M10 5594 80

DIN371 Al R45 C ISO 2 / 6H HSS-E M3 … M10 5551 80


DIN371 H C ISO 2 / 6H

IC ≥ M5

Carb.-UF M4 … M10 5593 82

Guhringstd. Carb.-UF 0.98 … 12.05 5527 83

SL reamers

12 SuperLine

SL program drilling tools range of application

Ratio drillsType RT 100 U Type RT 150 GG

For the drilling of long- and short-chipping materials such as structural and case hardened steels, cast steels, heat-treatable steels and alloyed steels with a tensile strength of up to app. 1200 N/mm2, including carbon steels, bronze, cast iron and high-alloyed AlSi-alloys. Highest speed and feed rates possible (see Guroguide). High alignment accuracy with small diameter tolerance and excellent surface finish. Excellent self-centering qualities as well as producing short chips thanks to a concave cutting point geometry with special point geometry and web thinning.Pre-conditions for usePowerful machines, no play in spindle bearings, al ignment accurate tool holders. Max. concentricity error of clamped tools: 0.02 mm. Chatterfree, mechanical feeds.Ratio drills with internal cooling are also available with straight shank but without whistle notch flats for the application in hydraulic chucks.

For the drilling of short-chipping materials such as cast iron, grey cast iron, spheroidal graphite and malleable cast iron, Al-alloys with high Si content. For the production of holes with high alignment accuracy (minimal deviation from straightness).The tools have extremely good self-centering qualities, achieve hole tolerances to H7 and produce an excellent surface finish. High cutting rates offer high productivity.

Ratio drills

Ratio drills Ratio drillsType RT 100 VA Type RT 100 12 x D

For the production of accurate holes in stainless steels with highest cutting rates and long tool life, Guhring has developed the new RT 100 VA. The RT 100 VA achieves its extraordinary efficiency thanks to• carbide developed for the machining of

stainless steels• the TiAlN nanoA wear resistant coating• tool geometry perfected for the machining of

stainless steelsIn addition, the high feed rates achievable with the RT 100 VA are thanks to the optimal heat dissipation via the chips.Additionally the highly effective coolant supply via the internal coolant ducts, having maximum cross section, supports the heat dissipation as well as chip evacuation and also counteracts the risk of localised hardening.

A high performance solid carbide drill for the efficient production of deep holes in steel, cast iron and non-ferrous metals. Excellent self-centering qualities thanks to special point grind. Provides safe chip flow even with tough and long-chipping materials due to adapted drill profile and large flute space. Double margins for excellent hole alignment and with good surface qualities and optimal support of the tool during withdrawal.

Pre-conditions for usePowerful machines. No play in spindle bearings. Alignment accurate tool holders. Max. concentricity error of clamped tools: 0.02 mm. Chatter-free, mechanical feeds.The drills, 12 x D with internal cooling, are available with straight shank and without drive flat for the application with hydraulic chucks and shrink fit chucks.

13SuperLine

High speed steel twist drillsType GT 500 DZ

The new GT 500 drill has been especially designed for the machining of high tensile steels and is produced in highly efficient PM-steel. By combining the advantages of high speed steel drills with those of solid carbide drills, it closes the gap that has existed for the machining of medium tensile steels and medium batch sizes.

3-fluted Ratio drills

Solid carbide twist drills

High speed steel twist drillsType FT 200

Type N

Type GU 500 DZ

A tool for drilling from the solid, achieving holes with excellent positional and form accuracy. Dimensional accuracy and surface finish correspond to those achieved with core drills. Centering or spotting is not normally required. Suitable for drilling cast iron and long-chipping Al-alloys. The 3-fluted FT 200 enables very high feed rates and optimal centering for the machining of cast iron and aluminium. The open flute form in conjunction with the short compact design, as well as our ultra fine carbide grade achieve maximum process reliability and enable applications under the most difficult of conditions, as for example oblique entry or interrupted drilling.

The tools are especially suitable for drilling cast steels, grey cast iron, chilled cast iron, austenitic manganese steels, bronzes, light metals and nonferrous metals. Furthermore suitable for the economic machining of abrasive materials (AlSi-alloys), fibre-reinforced plastics and other Duroplastics liable to cause severe abrasion on cutting lips and lands. The extremely rigid, extra short SL twist drill (Guhring no. 5516) is furthermore especially recommended for the application on CNC machines and capstan lathes.

For all those multiple machining tasks generally requiring the application of different drills, Guhring has introduced a universal drill, GU 500.GU 500 is suitable for the machining of non-ferrous metals, structural steels and carbon steels, high-alloyed steels, cast iron and cast alloys, plastics as well as aluminium.

14 SuperLine

3.00 6 62 20 363.10 | | | |

1/8 3.17 | | | |3.20 | | | |3.25 | | | |3.30 | | | |3.40 | | | |3.50 | | | |

9/64 3.57 | | | |3.60 | | | |3.70 | 62 20 |3.80 | 66 24 |3.90 | | | |

5/32 3.97 | | | |4.00 | | | |4.10 | | | |4.20 | | | |4.30 | | | |

11/64 4.37 | | | |4.40 | | | |4.50 | | | |4.60 | | | |4.65 | | | |4.70 | | 24 |

3/16 4.76 | | 28 |4.80 | | | |4.90 | | | |5.00 | | | |5.10 | | | |

13/64 5.16 | | | |5.20 | | | |5.30 | | | |5.40 | | | |5.50 | | | |5.55 | | | |

7/32 5.56 | | | |5.60 | | | |5.70 | | | |5.80 | | | |5.90 | | | |

15/64 5.95 | | | |6.00 6 66 28 28

Regrinding and

recoating

Net priceper piece

Tool material Carbide-UF Carbide-UF Carbide-UF

Carbide grade K/P K/P K/P

Guhring no. 5514 5614 5510 5610 8510 8610

Type RT 100 U RT 100 U RT 100 U RT 100 U RT 100 VA RT 100 VA

Shank form HA HE HA HE HA HE

Surface finish

Drilling depth 3 x D 3 x D 3 x D 3 x D 3 x D 3 x D

Coolant ducts – –

Ø-range mm

3.00 … 6.00

l1

d1d2

l2l3

Diameter Lengths

nominal Ød1m7

shank Ød2

total length

flute length

shank length

inch mm mm l1 l2 l3 Unit price in £ Unit price in £ Unit price in £

SL program Drilling Tools

Ratio drills, right-hand cutting DIN 6537 short

FIRE TiAlN nanoA tool with internal cooling

23.10 24.10 29.15 30.03 57.57 59.2623.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 31.54 32.94 62.58 65.0823.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 62.58 65.0823.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 62.58 65.08

16.00

15SuperLine

6.10 8 79 34 366.20 | | | |6.30 | | | |

1/4 6.35 | | | |6.40 | | | |6.50 | | | |6.60 | | | |6.70 | | | |

17/64 6.75 | | | |6.80 | | | |6.90 | | | |7.00 | | 34 |7.10 | | 41 |

9/32 7.14 | | | |7.20 | | | |7.30 | | | |7.40 | | | |7.50 | | | |

19/64 7.54 | | | |7.60 | | | |7.70 | | | |7.80 | | | |7.90 | | | |

5/16 7.94 | | | |8.00 8 79 41 368.10 10 89 47 408.20 | | | |8.30 | | | |

21/64 8.33 | | | |8.40 | | | |8.50 | | | |8.60 | | | |8.70 | | | |

11/32 8.73 | | | |8.80 | | | |8.90 | | | |9.00 | | | |9.10 | | | |

23/64 9.13 | | | |9.20 | | | |9.25 | | | |9.30 10 89 47 40

Regrinding and

recoating

Net priceper piece

Ratio drills, right-hand cutting DIN 6537 shortTool material Carbide-UF Carbide-UF Carbide-UF


Guhring no. 5514 5614 5510 5610 8510 8610



Surface finish



Ø-range mm

6.10 … 9.30

Diameter Lengths

nominal Ød1m7

shank Ød2

total length

flute length

shank length


23.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 72.59 75.9423.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 72.59 75.9425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 83.46 86.7725.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.14

20.16

16 SuperLine16

Regrinding and

recoating

Net priceper piece



Guhring no. 5514 5614 5510 5610 8510 8610



Surface finish



Ø-range mm

9.40 … 12.80

l1

d1d2

l2l3

Diameter Lengths

nominal Ød1m7

shank Ød2

total length

flute length

shank length



Ratio drills, right-hand cutting DIN 6537 short


9.40 10 89 47 409.50 | | | |

3/8 9.52 | | | |9.60 | | | |9.70 | | | |9.80 | | | |9.90 | | | |

25/64 9.92 | | | |10.00 10 89 47 4010.10 12 102 55 4510.20 | | | |10.30 | | | |

13/32 10.32 | | | |10.40 | | | |10.50 | | | |10.60 | | | |10.70 | | | |

27/64 10.72 | | | |10.80 | | | |10.90 | | | |11.00 | | | |11.10 | | | |

7/16 11.11 | | | |11.20 | | | |11.30 | | | |11.40 | | | |11.50 | | | |

29/64 11.51 | | | |11.60 | | | |11.70 | | | |11.80 | | | |11.90 | | | |

15/32 11.91 | | | |12.00 12 102 55 |12.10 14 107 60 |12.20 | | | |

31/64 12.30 | | | |12.40 | | | |12.50 | | | |12.60 | | | |

1/2 12.70 | | | |12.80 14 107 60 45

25.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 82.10 86.7738.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.5638.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 117.65 121.0038.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.6538.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 117.65 121.0051.87 53.76 95.90 99.8151.87 53.76 95.90 99.81 160.20 168.5451.87 53.76 95.90 99.8151.87 53.76 95.90 99.8151.87 53.76 95.90 99.81 160.20 168.5451.87 53.76 95.90 99.8151.87 53.76 95.90 99.81 160.20 168.5451.87 53.76 95.90 99.81 160.20 168.54

20.16

33.50

17SuperLine 17

Regrinding and

recoating

Net priceper piece

Ratio drills, right-hand cutting DIN 6537 shortTool material Carbide-UF Carbide-UF Carbide-UF


Guhring no. 5514 5614 5510 5610 8510 8610



Surface finish



Ø-range mm

12.90 … 20.00

Diameter Lengths

nominal Ød1m7

shank Ød2

total length

flute length

shank length


12.90 14 107 60 4513.00 | | | |

33/64 13.10 | | | |13.20 | | | |13.30 | | | |13.40 | | | |13.50 | | | |13.60 | | | |13.70 | | | |13.80 | | | |13.90 | | | |14.00 14 107 60 4514.10 16 115 65 4814.20 | | | |

9/16 14.29 | | | |14.30 | | | |14.40 | | | |14.50 | | | |14.60 | | | |14.70 | | | |14.80 | | | |14.90 | | | |15.00 | | | |15.10 | | | |15.20 | | | |15.30 | | | |15.40 | | | |15.50 | | | |15.60 | | | |15.70 | | | |15.80 | | | |

5/8 15.87 | | | |15.90 | | | |16.00 16 115 65 |16.50 18 123 73 |17.00 | | | |17.50 | | | |18.00 18 123 73 4818.50 20 131 79 5019.00 | | | |19.50 | | | |20.00 20 131 79 50

95.90 99.8151.87 53.76 95.90 99.81 149.36 156.8751.87 53.76 95.90 99.8151.87 53.76 95.90 99.8151.87 53.76 95.90 99.81 160.20 168.54

95.90 99.8151.87 53.76 95.90 99.81 160.20 168.54

95.90 99.8151.87 53.76 95.90 99.81 160.20 168.5451.87 53.76 95.90 99.81

95.90 99.8151.87 53.76 95.90 99.81 149.36 156.8766.76 69.53 117.10 121.8966.76 69.53 117.10 121.89 196.94 205.2866.76 69.53 117.10 121.89 196.94 205.2866.76 69.53 117.10 121.89 196.94 205.2866.76 69.53 117.10 121.8966.76 69.53 117.10 121.89 196.94 205.28

117.10 121.8966.76 69.53 117.10 121.89 196.94 205.28

117.10 121.89117.10 121.89 196.94

66.76 69.53 117.10 121.89 185.21 193.5866.76 69.53 117.10 121.8966.76 69.53 117.10 121.89 196.94 205.28

117.10 121.89 196.94 205.28117.10 121.89

66.76 69.53 117.10 121.89 196.94 205.2866.76 69.53 117.10 121.8966.76 69.53 117.10 121.89 196.94 205.2866.76 69.53 117.10 121.8966.76 69.53 117.10 121.89

117.10 121.8966.76 69.53 117.10 121.89 185.21 193.58

143.98 153.79 188.14 195.71 285.39 293.71143.98 153.79 188.14 195.71 256.99 273.67143.98 153.79 188.14 195.71 285.39 293.71143.98 153.79 188.14 195.71 256.99 273.67157.06 166.85 205.55 213.63 355.47 368.80157.06 166.85 205.55 213.63 337.10 350.45157.06 166.85 205.55 213.63 355.47 368.80157.06 166.85 205.55 213.63 337.10 350.45

33.50

46.84

18 SuperLine

DIN 6537 long

Regrinding and

recoating

Net priceper piece



Guhring no. 5515 5615 5511 5611 8511 8611



Surface finish



Ø-range mm

3.00 … 5.56

l1

d1 d2

l2 l3

Diameter Lengths

nominal Ød1m7

shank Ød2

total length

flute length

shank length



Ratio drills, right-hand cutting


3.00 6 66 28 363.10 | | | |

1/8 3.17 | | | |3.20 | | | |3.25 | | | |3.30 | | | |3.40 | | | |3.50 | | | |

9/64 3.57 | | | |3.60 | | | |3.70 | 66 28 |3.80 | 74 36 |3.90 | | | |

5/32 3.97 | | | |4.00 | | | |4.10 | | | |4.20 | | | |4.30 | | | |

11/64 4.37 | | | |4.40 | | | |4.50 | | | |4.60 | | | |4.65 | | | |4.70 | 74 36 |

3/16 4.76 | 82 44 |4.80 | | | |4.90 | | | |5.00 | | | |5.10 | | | |

13/64 5.16 | | | |5.20 | | | |5.30 | | | |5.40 | | | |5.50 | | | |5.55 | | | |

7/32 5.56 6 82 44 36

26.38 27.89 37.59 38.74 70.10 71.7426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 40.37 42.39 75.94 78.4426.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 75.94 78.4426.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.59

16.00

19SuperLine

Regrinding and

recoating

Net priceper piece

DIN 6537 longTool material Carbide-UF Carbide-UF Carbide-UF


Guhring no. 5515 5615 5511 5611 8511 8611



Surface finish



Ø-range mm

5.60 … 8.40

Diameter Lengths

nominal Ød1m7

shank Ød2

total length

flute length

shank length



5.60 6 82 44 365.70 | | | |5.80 | | | |5.90 | | | |

15/64 5.95 | | | |6.00 6 82 44 |6.10 8 91 53 |6.20 | | | |6.30 | | | |

1/4 6.35 | | | |6.40 | | | |6.50 | | | |6.60 | | | |6.70 | | | |

17/64 6.75 | | | |6.80 | | | |6.90 | | | |7.00 | | | |7.10 | | | |

9/32 7.14 | | | |7.20 | | | |7.30 | | | |7.40 | | | |7.50 | | | |

19/64 7.54 | | | |7.60 | | | |7.70 | | | |7.80 | | | |7.90 | | | |

5/16 7.94 | | | |8.00 8 91 53 368.10 10 103 61 408.20 | | | |8.30 | | | |

21/64 8.33 | | | |8.40 10 103 61 40

26.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 75.94 78.4426.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 88.44 90.9426.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 88.44 90.9429.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.47

16.00

20.16

20 SuperLine

DIN 6537 long

Regrinding and

recoating

Net priceper piece



Guhring no. 5515 5615 5511 5611 8511 8611



Surface finish



Ø-range mm

8.50 … 11.20

l1

d1 d2

l2 l3

Diameter Lengths

nominal Ød1m7

shank Ød2

total length

flute length

shank length





8.50 10 103 61 408.60 | | | |8.70 | | | |

11/32 8.73 | | | |8.80 | | | |8.90 | | | |9.00 | | | |9.10 | | | |

23/64 9.13 | | | |9.20 | | | |9.25 | | | |9.30 | | | |9.40 | 89 47 |9.50 | 103 61 |

3/8 9.52 | | | |9.60 | | | |9.70 | | | |9.80 | | | |9.90 | | | |

25/64 9.92 | | | |10.00 10 103 61 4010.10 12 118 71 4510.20 | | | |10.30 | | | |

13/32 10.32 | | | |10.40 | | | |10.50 | | | |10.60 | | | |10.70 | | | |

27/64 10.72 | | | |10.80 | | | |10.90 | | | |11.00 | | | |11.10 | | | |

7/16 11.11 | | | |11.20 12 118 71 45

29.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 101.81 104.3029.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 101.81 104.3044.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.6144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 141.02 145.1744.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.21

20.16

33.50

21SuperLine

Regrinding and

recoating

Net priceper piece

DIN 6537 longTool material Carbide-UF Carbide-UF Carbide-UF


Guhring no. 5515 5615 5511 5611 8511 8611



Surface finish



Ø-range mm

11.30 … 14.70

Diameter Lengths

nominal Ød1m7

shank Ød2

total length

flute length

shank length



11.30 12 118 71 4511.40 | | | |11.50 | | | |11.60 | | | |11.70 | | | |11.80 | | | |11.90 | | | |

15/32 11.91 | | | |12.00 12 118 71 |12.10 14 124 77 |12.20 | | | |

31/64 12.30 | | | |12.40 | | | |12.50 | | | |12.60 | | | |

1/2 12.70 | | | |12.80 | | | |12.90 | | | |13.00 | | | |

33/64 13.10 | | | |13.20 | | | |13.30 | | | |13.40 | | | |13.50 | | | |13.70 | | | |13.80 | | | |13.90 | | | |14.00 14 124 77 4514.10 16 133 83 4814.20 | | | |

9/16 14.29 | | | |14.30 | | | |14.40 | | | |14.50 | | | |14.60 | | | |14.70 16 133 83 48

44.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 141.02 145.1758.30 62.58 100.69 104.9958.30 62.58 100.69 104.99 193.58 201.9158.30 62.58 100.69 104.9958.30 62.58 100.69 104.9958.30 62.58 100.69 104.99 193.58 201.9158.30 62.58 100.69 104.9958.30 62.58 100.69 104.99 193.58 201.91

100.69 104.99 193.58 201.91100.69 104.99

58.30 62.58 100.69 104.99 183.57 186.88100.69 104.99

58.30 62.5858.30 62.58 100.69 104.99 193.58 201.91

100.69 104.9958.30 62.58 100.69 104.99 193.58 201.9158.30 62.58 100.69 104.99 193.58 201.9158.30 62.58 100.69 104.99

100.69 104.9958.30 62.58 100.69 104.99 183.57 186.8875.84 81.01 124.16 129.3475.84 81.01 124.16 129.34 236.98 245.3375.84 81.01 124.16 129.34 236.98 245.3375.84 81.01 124.16 129.34 236.98 245.3375.84 81.01 124.16 129.3475.84 81.01 124.16 129.34 236.98 245.33

124.16 129.3475.84 81.01 124.16 129.34 236.98 245.33

33.50

22 SuperLine

14.80 16 133 83 4814.90 | | | |15.00 | | | |15.10 | | | |15.20 | | | |15.30 | | | |15.40 | | | |15.50 | | | |15.60 | | | |15.70 | | | |15.80 | | | |

5/8 15.87 | | | |15.90 | | | |16.00 16 133 83 |16.50 18 143 93 |16.67 | | | |17.00 | | | |17.50 | | | |18.00 18 143 93 4818.50 20 153 101 5019.00 | | | |19.05 | | | |19.50 | | | |20.00 20 151 101 50


Ratio drills, right-hand cutting DIN 6537 long

Regrinding and

recoating

Net priceper piece



Guhring no. 5515 5615 5511 5611 8511 8611



Surface finish



Ø-range mm

14.90 … 20.00

l1

d1 d2

l2 l3

Diameter Lengths

nominal Ød1m7

shank Ød2

total length

flute length

shank length



124.16124.16 129.34

75.84 81.01 124.16 129.34 221.96 226.9675.84 81.01 124.16 129.3475.84 81.01 124.16 129.34 236.98 245.33

124.16 129.34 236.98 245.33124.16 129.34

75.84 81.01 124.16 129.34 236.98 245.3375.84 81.01 124.16 129.3475.84 81.01 124.16 129.34 236.98 245.3375.84 81.01 124.16 129.3475.84 81.01 124.16 129.34

124.16 129.3475.84 81.01 124.16 129.34 221.96 226.96152.70 162.48 198.99 206.94 343.79 355.47

198.99 206.94152.70 162.48 198.99 206.94 317.07 327.09152.70 162.48 198.99 206.94 343.79 355.47152.70 162.48 198.99 206.94 433.91 450.57165.76 176.68 216.40 224.86 433.91 450.57165.76 176.68 216.40 224.86 402.20 412.22

216.40 224.86165.76 176.68 216.40 224.86 433.91 450.57165.76 176.68 216.40 224.86 402.20 412.22

33.50

46.84

23SuperLine

3.00 6 70 30 363.10 | | | |

1/8 3.17 | | | |3.20 | | | |3.25 | | | |3.30 | 70 35.5 |3.40 | 75 37.5 |3.50 | | | |

9/64 3.57 | | | |3.60 | | | |3.70 | | | |3.80 | | | |3.90 | | | |

5/32 3.97 | | | |4.00 | | | |4.10 | | | |4.20 | 75 37.5 |4.30 | 85 45 |

11/64 4.37 | | | |4.40 | | | |4.50 | | | |4.60 | | | |4.65 | | | |4.70 | 85 45 |

3/16 4.76 | 90 50 |4.80 | | | |4.90 | | | |5.00 | | | |5.10 | | | |

13/64 5.16 | | | |5.20 | | | |5.30 | 90 50 |5.40 | 97 57 |5.50 | | | |

7/32 5.56 | | | |5.70 | | | |5.80 | | | |5.90 | | | |

15/64 5.95 | | | |6.00 6 97 57 |6.20 8 106 66 366.30 8 106 66 36

Regrinding and

recoating

Net priceper piece

Tool material Carbide-UF

Carbide grade K/P

Guhring no. 5512 5612

Type RT 100 U RT 100 U

Shank form HA HE

Surface finish

Drilling depth 7 x D 7 x D

Coolant ducts

Ø-range mm

3.00 … 6.30

l1

d2

l3

d1

l2

t max

tmax = l2-1,5 x d1

Diameter Lengthsnominal Ø

d1m7

shank Ød2

total length

flute length

shank length

inch mm mm l1 l2 l3 Unit price in £

Ratio drills, right-hand cutting Guhring std.

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.62 96.90

92.6292.62 96.90

92.62 96.90

92.62 96.9092.6292.62 96.90

112.05 117.10112.05 117.10

16.00

20.16

24 SuperLine

1/4 6.35 8 106 66 666.50 | | | |6.60 | | | |6.70 | | | |6.80 | 106 66 |6.90 | 116 76 |7.00 | | | |7.10 | | | |7.20 | | | |7.40 | | | |7.50 | | | |

19/64 7.54 | | | |7.60 | | | |7.70 | | | |7.80 | | | |

5/16 7.94 | | | |8.00 8 116 76 368.10 10 131 87 408.20 | | | |

21/64 8.33 | | | |8.40 | | | |8.50 | | | |8.60 | | | |8.70 | | | |

11/32 8.73 | | | |8.80 | | | |9.00 | 131 87 |9.10 | 139 95 |

23/64 9.13 | | | |9.20 | | | |9.30 | | | |9.40 | | | |9.50 | | | |

3/8 9.52 | | | |9.70 | | | |9.80 | | | |

25/64 9.92 | | | | 9.90 | | | |10.00 10 139 95 4010.20 12 155 106 4510.30 | | | |

13/32 10.32 12 155 106 45


FIRE with coolant ducts

Regrinding and

recoating

Net priceper piece


Carbide grade K/P



Shank form HA HE

Surface finish


Coolant ducts

Ø-range mm

6.35 … 10.32

Diameter Lengths

nominal Ød1m7

shank Ød2

total length

flute length

shank length



112.05 117.10112.05 117.10112.05 117.10112.05 117.10112.05 117.10112.05 117.10112.05 117.10112.05 117.10112.05 117.10112.05112.05 117.10112.05112.05 117.10112.05 117.10112.05 117.10112.05112.05 117.10136.27 142.83136.27 142.83136.27136.27 142.83136.27 142.83136.27 142.83136.27 142.83136.27136.27 142.83136.27 142.83136.27 142.83136.27136.27 142.83136.27136.27 142.83136.27 142.83136.27 142.83136.27 142.83136.27 142.83136.27136.27 142.83136.27 142.83180.82 187.39180.82 187.39180.82

20.16

33.50

25SuperLine

10.50 12 155 106 4527/64 10.72 | | | |

10.80 | | | |11.00 | 155 106 |

7/16 11.11 | 163 114 |11.20 | | | |11.50 | | | |11.80 | | | |

15/32 11.91 | | | |12.00 12 163 114 |12.10 14 182 133 |12.20 | | | |

31/64 12.30 | | | |12.50 | | | |

1/2 12.70 | | | |13.00 | | | |13.10 | | | |13.50 | | | |14.00 14 182 133 4514.10 16 204 152 4814.20 | | | |

9/16 14.29 | | | |14.50 | | | |15.00 | | | |15.50 | | | |

5/8 15.87 | | | |16.00 16 204 152 |16.50 18 223 171 |17.00 | | | |17.50 | | | |18.00 18 223 171 4818.50 20 244 190 5019.00 | | | |

3/4 19.05 | | | |19.50 | | | |20.00 20 244 190 50

Regrinding and

recoating

Net priceper piece


Carbide grade K/P



Shank form HA HE

Surface finish


Coolant ducts

Ø-range mm

10.50 … 20.00

Diameter Lengths

nominal Ød1m7

shank Ød2

total length

flute length

shank length



180.82 187.39180.82180.82 187.39180.82 187.39180.82180.82 187.39180.82 187.39180.82 187.39180.82180.82 187.39228.14 233.18228.14 233.18228.14228.14 233.18228.14 233.18228.14 233.18228.14228.14 233.18228.14 233.18286.06 288.09286.06 288.09286.06286.06 288.09286.06 288.09286.06 288.09286.06286.06 288.09357.60 361.01357.60 361.01357.60 361.01357.60 361.01419.81 424.73419.81 424.73419.81 424.73419.81 424.73419.81 424.73

33.50

46.84

26 SuperLine

3.00 6 90 50 363.10 | | | |

1/8 3.17 | | | |3.20 | | | |3.30 | | | |3.40 | | | |3.50 | | | |3.60 | | | |3.70 | 90 50 |3.80 | 102 64 |3.90 | | | |4.00 | | | |4.10 | | | |4.20 | | | |4.30 | | | |4.40 | | | |4.50 | | | |4.60 | | | |4.70 | 102 64 |4.80 | 116 78 |4.90 | | | |5.00 | | | |5.10 | | | |5.20 | | | |5.30 | | | |5.40 | | | |5.50 | | | |5.60 | | | |5.70 | | | |5.80 | | | |5.90 | | | |6.00 6 116 78 |6.10 8 146 78 |6.20 | | | |6.30 | | | |

1/4 6.35 8 146 108 36

Guhring std.

Regrinding and

recoating

Net priceper piece


Carbide grade K/P

Guhring no. 5525

Type RT 100

Shank form HA

Surface finish

Drilling depth 12 x D

Coolant ducts

Ø-range mm

3.00 … 6.35

l1

d2

l3 d

1 l2

t max

tmax = l2-1,5 x d1

Diameter Lengths

nominal Ød1m7

shank Ød2

totallength

flutelength

shanklength




FIRE with coolant ducts

117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10137.42137.42137.42137.42

17.44

21.37

27SuperLine

Guhring std.

6.40 8 146 108 366.50 | | | |6.60 | | | |6.70 | | | |6.80 | | | |6.90 | | | |7.00 | | | |7.10 | | | |7.20 | | | |7.30 | | | |7.40 | | | |7.50 | | | |7.60 | | | |7.70 | | | |7.80 | | | |7.90 | | | |8.00 8 146 108 368.10 10 162 120 408.20 | | | |8.30 | | | |8.40 | | | |8.50 | | | |8.60 | | | |8.70 | | | |8.80 | | | |8.90 | | | |9.00 | | | |9.10 | | | |9.20 | | | |9.30 | | | |9.40 | | | |9.50 | | | |

3/8 9.52 | | | |9.60 | | | |9.70 | | | |9.80 10 162 120 40


Regrinding and

recoating

Net priceper piece


Carbide grade K/P

Guhring no. 5525

Type RT 100

Shank form HA

Surface finish


Coolant ducts

Ø-range mm

6.40 … 9.80

Diameter Lengths

nominal Ød1m7

shank Ød2

totallength

flutelength

shanklength


137.42137.42137.42137.42137.42137.42137.42137.42137.42137.42137.42137.42137.42137.42137.42137.42137.42174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01

21.37

28 SuperLine

9.90 10 162 120 4010.00 10 162 120 4010.20 12 204 156 4510.50 | | | |11.00 | | | |11.50 | | | |12.00 12 204 156 |12.50 14 230 182 |

1/2 12.70 | | | |13.00 | | | |13.50 | | | |14.00 14 230 182 4514.50 16 260 208 4815.00 | | | |15.50 | | | |16.00 16 260 208 4816.50 18 285 234 |17.00 | | | |17.50 | | | |18.00 18 285 234 4818.50 20 310 258 5019.00 | | | |

3/4 19.05 | | | |19.50 | | | |20.00 20 310 258 50

Regrinding and

recoating

Net priceper piece


Carbide grade K/P

Guhring no. 5525

Type RT 100

Shank form HA

Surface finish


Coolant ducts

Ø-range mm

9.90 … 20.00

Diameter Lengths

nominal Ød1m7

shank Ød2

totallength

flutelength

shanklength



bright FIRE with coolant ducts


174.01174.01227.77227.77227.77227.77227.77283.54283.54283.54283.54283.54402.14402.14402.14402.14447.95447.95447.95447.95638.61638.61638.61638.61638.61

21.37

34.83

48.72

29SuperLine


Regrinding

Net priceper piece

3.00 6 91 42 361/8 3.17 | | | |

3.25 | | | |3.30 | | 42 |3.50 | | 48 |

9/64 3.57 | 91 48 |3.80 | 121 77 |

5/32 3.97 | | | |4.00 | | | |4.20 | | | |4.50 | | 77 |5.00 | | 82 |5.50 | | | |6.00 6 121 82 |

1/4 6.35 8 146 106 |6.50 | | | |6.80 | | | |7.00 | | | |7.50 | | | |7.80 | | | |8.00 8 146 106 368.50 10 175 130 409.00 | | | |9.50 | | | |

3/8 9.52 | | | |10.00 10 175 130 4010.20 12 209 159 4510.50 | | | |11.00 | | | |11.50 12 209 159 4512.00 12 209 159 4512.50 14 233 183 |

1/2 12.70 | | | |13.00 | | | |13.50 | | | |14.00 14 233 183 4514.50 16 260 207 4815.00 | | | |15.50 | | | |16.00 16 260 207 48


Carbide grade K

Guhring no. 5513

Type RT 150 GG

Shank form HA

Surface finish


Coolant ducts

Ø-range mm

3.00 … 16.00

l 1

l 2 l 3

d 1

d 2

t

tmax = l2-1,5 x d1

Diameter Lengths

nominal Ød1m7

shank Ød2

totallength

flutelength

shanklength


13.35

16.00

21.37

38.9938.9938.9938.9938.9938.9938.9938.9948.4648.4648.4648.4648.4648.4663.3563.3563.3563.3563.3563.3563.3579.6279.6279.6279.6279.6298.8198.8198.8198.8198.81131.48131.48131.48131.48131.48166.44166.44166.44166.44

30 SuperLine

3.00 6 66 28 363.10 | | | |3.20 | | | |3.30 | | | |3.50 | | | |3.70 | 66 28 |3.80 | 74 36 |4.00 | | | |4.10 | | | |4.20 | | | |4.50 | 74 36 |4.80 | 82 44 |5.00 | | | |5.10 | | | |5.20 | | | |5.30 | | | |5.50 | | | |5.80 | | | |6.00 6 82 44 |6.10 8 91 53 |6.20 | | | |6.40 | | | |6.50 | | | |6.70 | | | |6.80 | | | |7.00 | | | |7.10 | | | |7.40 | | | |7.50 | | | |7.80 | | | |8.00 8 91 53 368.10 10 103 61 408.20 | | | |8.40 | | | |8.50 | | | |8.60 10 103 61 40

Regrinding

Net priceper piece


Carbide grade K

Guhring no. 5518

Type FT200

Shank form HA

Surface finish


Coolant ducts –

Ø-range mm

3.00 … 8.60

l2

l1 d

1

d2

l3

tmax

tmax = l2-1,5 x d1

Diameter Lengths

nominal Ød1m7

shank Ød2

totallength

flutelength

shanklength

mm mm l1 l2 l3 Unit price in £

3-fluted Ratio drills, right-hand cutting DIN 6537 long


bright

31.2931.2931.2931.2931.2931.2931.2931.2931.2931.2931.2931.2931.2931.2931.2931.2931.2931.2931.2937.5937.5937.5937.5937.5937.5937.5937.5937.5937.5937.5937.5943.0343.0343.0343.0343.03

13.35

16.00

31SuperLine

8.70 10 103 61 408.80 | | | |9.00 | | | |9.10 | | | |9.50 | | | |9.80 | | | |

10.00 10 103 61 4010.10 12 118 71 4510.20 | | | |10.30 | | | |10.50 | | | |11.00 | | | |11.20 | | | |11.50 | | | |11.80 | | | |12.00 12 118 71 |12.10 14 124 77 |12.50 | | | |13.00 | | | |13.50 | | | |14.00 14 124 77 4514.50 16 133 83 4815.00 | | | |15.50 16 133 83 |16.00 16 133 83 |16.50 18 143 93 |17.00 | | | |17.50 | | | |18.00 18 143 93 4818.50 20 153 101 5019.00 | | | |19.50 | | | |20.00 20 153 101 50

3-fluted Ratio drills, right-hand cutting DIN 6537 long

Regrinding

Net priceper piece


Carbide grade K

Guhring no. 5518

Type FT200

Shank form HA

Surface finish


Coolant ducts –

Ø-range mm

8.70 … 20.00

Diameter Lengths

nominal Ød1m7

shank Ød2

totallength

flutelength

shanklength

mm mm l1 l2 l3 Unit price in £

43.0343.0343.0343.0343.0343.0343.0363.2263.2263.2263.2263.2263.2263.2263.2263.2282.9182.9182.9182.9182.91102.34102.34102.34102.34158.62158.62158.62158.62214.25214.25214.25214.25

16.00

21.37

32 SuperLine

1.50 32 9 1.60 34 102.00 38 122.10 38 122.20 40 132.30 40 13

3/32 2.38 43 142.40 | |2.50 | |2.60 43 142.70 46 16

7/64 2.78 | |2.80 | |2.90 | |3.00 46 163.10 49 18

1/8 3.17 | |3.20 | |3.30 49 183.40 52 203.50 | |

9/64 3.57 | |3.60 | |3.70 52 203.80 55 223.90 | |

5/32 3.97 | |4.00 | |4.10 | |4.20 55 224.30 58 24

11/64 4.37 | |4.40 | |4.50 | |4.60 | |4.70 58 24

3/16 4.76 62 264.80 | |4.90 | |5.00 | |5.10 | |5.20 62 26

5.50 66 285.80 66 286.00 66 28

1/4 6.35 70 316.40 | |6.50 70 316.80 74 346.90 | |7.00 | |

9/32 7.14 | |7.50 74 34

5/16 7.94 79 378.00 | |8.50 79 378.60 84 40

11/32 8.73 | |8.80 | |9.00 | |9.50 84 40

10.00 89 4310.20 | |10.50 89 4311.00 95 47

7/16 11.11 | |11.50 95 47

15/32 11.91 102 5112.00 102 51

Stub drills, right-hand cutting DIN 6539Tool material Carbide-UF

Carbide grade K

Guhring no. 5516

Type N

Surface finish

Ø-range mm

1.50 … 5.20

Diameter Lengths

total fluteinch mm length length Unit price in £


Carbide grade K

Guhring no. 5516

Type N

Surface finish

Ø-range mm

5.50 … 12.00

Diameter Lengths



bright

3.283.283.283.283.283.283.283.283.283.284.804.804.804.804.804.804.804.804.805.055.055.445.445.445.945.945.945.946.446.446.446.446.446.446.447.067.067.067.067.06

12.629.09

9.099.599.5911.9923.7311.9915.0315.0314.3916.9116.9119.3019.3023.7324.4825.8825.8824.7326.7528.7833.1933.1936.7242.1442.1442.1442.14

33SuperLine

2.00 49 242.10 49 242.20 53 272.30 53 27

3/32 2.38 57 302.40 | |2.50 | |2.60 57 302.70 61 33

7/64 2.78 | |2.80 | |2.90 | |3.00 61 333.10 65 36

1/8 3.17 | |3.20 | |3.30 65 363.40 70 393.50 | |

9/64 3.57 | |3.60 | |3.70 70 393.80 75 433.90 | |

5/32 3.97 | |4.00 | |4.10 | |4.20 75 434.30 80 47

11/64 4.37 | |4.40 | |4.50 | |4.60 | |4.70 80 47

3/16 4.76 86 524.80 | |4.90 | |5.00 | |5.10 | |

13/64 5.16 86 525.50 93 57

7/32 5.56 93 57

15/64 5.95 93 576.00 93 57

1/4 6.35 101 636.50 101 636.80 109 696.90 | |7.00 | |

9/32 7.14 | |7.50 109 69

5/16 7.94 117 758.00 | |8.50 117 75

11/32 8.73 125 819.00 | |9.50 125 81

10.00 133 8710.20 | |10.50 133 8711.00 142 94

7/16 11.11 | |11.50 142 94

15/32 11.91 151 10112.00 151 101

Jobber drills, right-hand cutting Guhring std.Tool material Carbide-UF

Carbide grade K

Guhring no. 5517

Type N

Surface finish

Ø-range mm

2.00 … 5.56

Diameter Lengths



Carbide grade K

Guhring no. 5517

Type N

Surface finish

Ø-range mm

5.95 … 12.00

Diameter Lengths


4.044.675.055.055.055.055.057.067.067.067.067.066.446.446.446.446.447.467.067.967.967.967.967.967.967.968.338.3310.8510.8510.859.9811.4911.4911.4911.4911.4910.8523.1015.0315.0315.39

15.3915.3919.3019.3022.8522.8522.8525.8822.8529.2826.7531.2935.5832.1935.5839.6247.5845.9355.9159.3159.3159.3164.74

34 SuperLine

1.00 26 61.10 28 71.20 30 81.30 30 81.40 32 91.50 32 91.60 34 101.70 34 101.80 36 111.90 36 112.00 38 122.10 38 122.20 40 132.30 40 13

3/32 2.38 43 142.40 | |2.50 | |2.60 43 142.70 46 16

7/64 2.78 | |2.80 | |2.90 | |3.00 46 163.10 49 18

1/8 3.17 | |3.20 | |3.30 49 183.40 52 203.50 | |

9/64 3.57 | |3.60 | |3.70 52 203.80 55 223.90 | |

5/32 3.97 | |4.00 | |4.10 | |4.20 55 224.30 58 24

11/64 4.37 | |4.40 | |4.50 58 24

Tool material HSCO PM HSS-E

Guhring no. 5524 5520 5521

Type GU 500 DZ GU 500 DZ GT 500 DZ

Surface finish

Ø-range mm

1.00 … 4.50

Diameter Lengths

total fluteinch mm length length Unit price in £ Unit price in £


bright TiN

Stub drills, right-hand cutting DIN 1897

1.39 3.48 6.711.39 3.48 6.711.39 3.71 6.841.39 3.94 7.181.39 3.48 6.711.39 3.36 6.371.39 3.48 6.481.39 3.48 6.481.39 3.48 6.481.39 3.48 6.481.39 2.90 5.551.39 3.48 6.141.39 3.48 6.711.39 3.01 6.711.39 3.36 6.711.39 3.71 6.951.39 3.13 5.911.39 3.82 6.951.51 3.94 6.601.51 3.82 5.551.51 3.71 7.181.51 3.94 6.371.39 3.36 6.141.51 3.48 6.371.51 3.48 6.371.51 3.36 6.841.51 3.36 6.951.62 3.94 6.251.62 3.36 6.711.62 3.82 6.371.62 4.17 5.551.62 3.82 5.911.74 4.05 6.711.74 4.63 7.531.74 4.17 6.711.74 3.82 6.251.74 4.28 7.181.74 3.82 6.371.74 4.28 7.071.74 4.53 7.301.74 4.63 7.531.74 4.28 6.37

35SuperLine


Guhring no. 5524 5520 5521


Surface finish

Ø-range mm

4.60 … 8.00

Diameter Lengths


Stub drills, right-hand cutting

4.60 58 244.70 58 24

3/16 4.76 62 264.80 | |4.90 | |5.00 | |5.10 | |

13/64 5.16 | |5.20 | |5.30 62 265.40 66 285.50 | |

7/32 5.56 | |5.60 | |5.70 | |5.80 | |5.90 | |

15/64 5.95 | |6.00 66 286.10 70 316.20 | |6.30 | |

1/4 6.35 | |6.40 | |6.50 | |6.60 | |6.70 70 316.80 74 346.90 | |7.00 | |7.10 | |

9/32 7.14 | |7.20 | |7.30 | |7.40 | |7.50 74 347.60 79 377.70 | |7.80 | |7.90 | |

5/16 7.94 | |8.00 79 37

DIN 1897

1.74 4.28 7.991.74 4.63 7.531.74 4.76 7.531.74 4.86 8.111.74 4.86 8.221.74 4.17 6.951.85 4.53 7.181.85 4.76 7.411.85 4.86 8.341.85 5.09 7.992.08 5.45 8.681.97 4.63 7.412.21 5.09 8.912.21 5.55 8.912.21 5.91 9.392.21 5.68 9.622.21 5.91 9.392.21 5.55 9.032.08 4.99 7.882.44 5.91 9.262.44 5.91 9.262.44 6.25 9.722.44 6.25 9.622.44 6.25 9.622.32 5.91 8.112.55 6.48 10.192.55 6.71 10.543.01 7.18 9.493.01 7.07 11.243.01 6.60 12.393.71 7.99 13.663.71 8.11 13.083.71 8.11 13.553.71 8.11 13.553.71 8.22 13.663.13 6.84 12.974.05 8.80 14.484.05 8.80 14.484.05 8.80 12.394.05 8.80 14.484.05 8.34 15.633.36 8.11 13.55

36 SuperLine


Guhring no. 5524 5520 5521


Surface finish

Ø-range mm

8.10 … 14.00

Diameter Lengths


8.10 79 378.20 | |8.30 | |8.40 | |8.50 79 378.60 84 408.70 | |

11/32 8.73 | |8.80 | |9.00 | |9.30 | |9.50 84 409.80 89 43

10.00 | |10.20 | |10.40 | |10.50 89 4311.00 95 47

7/16 11.11 | |11.50 95 4712.00 102 5112.50 | |12.70 | |13.00 102 5113.50 107 5414.00 107 54


bright TiN

Stub drills, right-hand cutting DIN 1897

4.05 10.42 17.144.05 10.77 17.714.05 11.00 18.064.05 11.00 18.063.48 9.49 15.056.14 11.93

14.824.76 10.65 16.444.76 11.93 21.194.05 9.62 16.565.09 11.00 24.774.53 10.65 19.915.68 12.62 21.425.09 10.42 19.116.60 13.20 28.148.55 13.206.60 12.51 27.217.64 14.02 27.218.80 14.94 32.078.80 16.10 28.719.16 15.63 33.0011.24 17.25 36.00

18.0613.20 17.25 36.0013.66 18.42 38.3314.25 22.81 47.59

37SuperLine

1.00 34 121.10 36 14

3/64 1.19 38 161.20 38 161.30 38 161.40 40 181.45 40 181.50 40 18

1/6 1.59 43 201.60 43 201.70 43 201.80 46 221.90 46 22

5/64 1.98 49 242.00 49 242.10 49 242.20 53 272.30 | |

3/32 2.38 53 272.40 57 302.50 | |2.60 57 302.70 61 33

7/64 2.78 | |2.80 | |2.90 | |3.00 61 333.10 65 36

1/8 3.17 | |3.20 | |3.30 65 363.40 70 393.50 | |

9/64 3.57 | |3.60 | |3.70 70 393.80 75 433.90 | |

5/32 3.97 | |4.00 | |4.10 | |4.20 75 43

Tool material HSS HSCO PM HSS-E

Guhring no. 9651 5523 5519 5522

Type N GU 500 DZ GU 500 DZ GT 500 DZ

Surface finish Tip coated

Ø-range mm

1.00 … 4.20

Diameter Lengths

total fluteinch mm length length Unit price in £ Unit price in £ Unit price in £

Jobber drills, right-hand cutting DIN 338

0.86 1.39 2.90 7.410.98 1.39 3.13 7.300.970.91 1.39 3.01 7.530.86 1.39 3.13 7.990.83 1.39 3.13 7.30

3.130.65 1.39 2.90 7.070.640.64 1.39 2.90 7.180.77 1.39 3.13 7.180.75 1.39 3.13 7.180.73 1.39 3.13 7.180.750.58 1.39 3.01 6.140.70 1.39 3.13 6.710.70 1.39 3.36 7.300.70 1.39 3.24 7.300.57 1.39 3.24 7.410.70 1.39 3.01 7.530.57 1.39 3.13 6.600.70 1.39 3.24 7.990.70 1.51 3.36 7.530.69 1.51 3.36 6.480.72 1.51 3.36 8.340.61 1.51 3.36 7.300.59 1.39 3.24 6.950.77 1.51 3.71 7.300.59 1.51 3.48 7.300.75 1.51 3.48 7.990.64 1.51 3.71 7.990.81 1.62 3.94 7.180.65 1.62 3.94 7.530.79 1.62 3.94 7.300.82 1.62 3.94 6.370.70 1.62 3.94 6.840.86 1.74 4.17 7.530.89 1.74 4.28 8.800.73 1.74 4.17 7.640.73 1.74 4.05 7.070.76 1.74 4.17 8.220.78 1.74 4.17 7.30

38 SuperLine

4.25 75 434.30 80 47

11/64 4.37 | |4.40 | |4.50 | |4.60 80 474.70 80 47

3/16 4.76 86 524.80 86 524.90 | |5.00 | |5.10 | |

13/64 5.16 | |5.20 | |5.30 86 525.40 93 575.50 | |

7/32 5.56 | |5.60 | |5.70 | |5.80 | |5.90 | |

15/64 5.95 | |6.00 93 576.10 101 636.20 | |6.30 | |

1/4 6.35 | |6.40 | |6.50 | |6.60 | |6.70 101 63

17/64 6.75 109 696.80 | |6.90 | |7.00 | |7.10 | |

9/32 7.14 | |7.20 | |7.30 | |7.40 | |7.50 109 69

DIN 338Tool material HSS HSCO PM HSS-E

Guhring no. 9651 5523 5519 5522



Ø-range mm

4.25 … 7.50

Diameter Lengths



bright TiN

Jobber drills, right-hand cutting

4.400.97 1.74 4.40 8.110.97 1.74 4.40 8.341.00 1.74 4.40 8.800.81 2.21 4.28 7.181.05 1.74 4.53 9.161.06 1.74 4.53 8.800.89 1.85 4.63 8.801.09 1.74 4.63 9.261.10 1.85 4.76 9.490.93 1.85 4.63 7.991.16 1.85 4.76 8.681.18 1.85 4.76 8.801.22 1.85 4.76 9.951.24 1.85 5.09 9.621.27 2.08 5.68 10.421.28 1.97 5.55 8.911.09 2.21 5.55 10.651.35 2.21 5.79 10.541.40 2.21 5.79 11.241.43 2.21 5.79 11.581.47 2.21 5.91 11.241.56 2.21 5.68 10.771.23 2.08 5.55 9.391.56 2.44 6.37 11.241.60 2.44 6.25 11.241.62 2.44 6.14 11.701.36 2.44 6.25 11.581.70 2.44 6.25 11.581.40 2.44 6.71 9.721.77 2.55 6.84 12.271.83 2.55 6.95 12.621.811.51 3.13 7.53 12.391.92 3.13 7.53 13.431.59 3.01 7.53 14.822.02 3.71 8.34 16.441.71 3.71 8.34 15.632.07 3.71 8.34 16.212.14 3.71 8.80 16.212.18 3.71 8.80 16.331.83 3.13 7.99 15.63

39SuperLine

DIN 338

19/64 7.54 117 757.60 | |7.70 | |7.80 | |7.90 | |

5/16 7.94 | |8.00 | |8.10 | |8.20 | |8.30 | |

21/64 8.33 | |8.40 117 758.50 117 758.60 125 818.70 | |

11/32 8.73 | |8.80 | |8.90 | |9.00 | |9.10 | |

23/64 9.13 | |9.20 | |9.30 | |9.40 | |9.50 125 81

3/8 9.52 133 879.60 | |9.70 | |9.80 | |9.90 | |

25/64 9.92 | |10.00 | |10.10 | |10.20 | |10.30 | |

13/32 10.32 | |10.40 | |10.50 | |10.60 133 8710.70 142 94

27/64 10.72 | |10.80 142 94


Guhring no. 9651 5523 5519 5522



Ø-range mm

7.54 … 10.80

Diameter Lengths


Jobber drills, right-hand cutting

2.372.30 4.05 9.49 17.252.37 4.05 9.26 17.372.43 4.05 9.39 14.582.49 4.05 9.85 17.252.03 4.05 9.39 18.752.06 3.36 9.03 16.212.60 4.05 9.72 21.422.65 4.05 9.62 22.342.73 4.05 9.62 22.342.852.81 4.05 10.08 22.342.34 3.48 9.16 18.982.96 6.14 9.953.02 4.76 13.442.49 4.76 9.95 20.373.08 4.76 10.77 26.283.18 6.78 10.772.63 4.05 10.08 20.963.323.503.393.47 5.09 11.00 31.143.562.95 4.53 10.65 24.772.973.743.77 12.393.85 5.68 12.39 26.744.014.203.29 5.09 12.04 23.854.935.02 6.71 13.89 36.475.23 8.55 14.023.635.443.68 6.71 14.02 35.435.635.774.88 9.145.85

40



Guhring no. 9651 5523 5519 5522



Ø-range mm

10.90 … 14.50

Diameter Lengths


DIN 338Jobber drills, right-hand cutting

SuperLine

10.90 142 9411.00 | |11.10 | |

7/16 11.11 | |11.20 | |11.30 | |11.40 | |11.50 | |

29/64 11.51 | |11.60 | |11.70 | |11.80 142 9411.90 151 101

15/32 11.91 | |12.00 | |12.10 | |12.20 | |

31/64 12.30 151 10112.40 151 10112.50 | |12.60 | |12.70 | |12.80 | |12.90 | |13.00 | |13.10 | |13.20 151 10113.25 160 10813.30 | |13.40 | |

17/32 13.49 | |13.50 | |13.60 | |13.70 | |13.75 | |13.80 | |

35/64 13.89 | |13.90 | |14.00 160 10814.25 169 114

9/16 14.29 | |14.50 169 114

bright TiN

6.004.11 7.64 14.48 35.436.304.22 8.80 15.17 41.806.366.516.684.52 8.80 16.10 37.405.936.896.987.287.284.965.08 9.16 17.02 42.729.569.786.849.905.58 11.24 17.60 46.6610.53

1/2 8.43 12.27 63.7210.9311.156.17 13.20 18.88 46.66

33/64 9.9012.1213.0313.1913.5710.8810.39 14.94 21.88 49.5513.9514.1714.1414.2211.8214.7810.66 15.63 22.81 62.1715.3211.8515.32

41


Guhring no. 9651 5523 5519 5522



Ø-range mm

14.68 … 16.00

Diameter Lengths


DIN 338Jobber drills, right-hand cutting

SuperLine

37/64 14.68 178 12014.75 | |15.00 | |

19/32 15.08 | |15.25 | |

39/64 15.48 | |15.50 | |15.75 | |16.00 178 120

16.5916.8613.7414.6218.8519.6117.8820.6016.29

42 SuperLine

Long series twist drills, right-hand cutting DIN 340

1.00 56 331.10 60 371.20 65 411.30 65 411.40 70 451.50 70 451.60 76 501.70 76 501.80 80 531.90 80 532.00 85 562.10 85 562.20 90 592.30 90 592.40 95 622.50 | |2.60 95 622.70 10 662.80 | |2.90 | |3.00 10 663.10 106 693.20 | |3.30 106 693.40 112 733.50 | |3.60 | |3.70 112 733.80 119 783.90 | |4.00 | |4.10 | |4.20 119 784.30 126 824.40 | |4.50 | |4.60 | |4.70 126 824.80 132 874.90 | |5.00 | |5.10 132 87

Tool material HSCO


Type GU 500 DZ GU 500 DZ

Surface finish

Ø-range mm

1.00 … 5.10

Diameter Lengths

total flutemm length length Unit price in £


bright TiN

3.57 6.414.83 7.254.41 8.094.52 7.984.83 7.883.78 6.834.73 8.094.62 8.824.62 8.514.31 9.033.47 6.723.89 7.773.89 7.883.89 7.773.99 7.143.57 6.834.10 7.884.31 8.304.62 7.984.20 8.303.68 7.354.41 8.824.20 8.194.62 8.724.41 9.034.52 8.824.73 9.144.73 8.934.52 8.614.41 9.664.73 9.354.41 9.454.20 9.144.52 10.194.94 9.035.67 9.664.31 9.244.83 10.714.41 10.405.04 10.614.73 10.715.15 11.87

43SuperLine


5.20 132 875.30 132 875.40 139 915.50 | |5.60 | |5.70 | |5.80 | |5.90 | |6.00 139 916.10 148 976.20 | |6.30 | |6.40 | |6.50 | |6.60 | |6.70 148 976.80 156 1026.90 | |7.00 | |7.10 | |7.20 | |7.30 | |7.40 | |7.50 156 1027.60 165 1097.70 | |7.80 | |7.90 | |8.00 | |8.10 | |8.20 | |8.30 | |8.40 | |8.50 165 1098.60 175 1158.70 | |8.80 | |8.90 | |9.00 | |9.10 | |9.20 | |9.30 175 115

Tool material HSCO



Surface finish

Ø-range mm

5.20 … 9.30

Diameter Lengths


5.25 11.665.99 12.816.62 11.974.20 11.137.04 14.497.14 16.074.10 14.077.56 15.755.78 13.347.98 15.867.98 14.187.56 15.867.88 14.395.88 13.868.82 15.968.82 16.388.72 17.549.87 18.177.98 16.49

10.08 15.9610.61 18.2710.92 19.1111.13 19.8511.66 20.169.24 19.11

10.19 20.3711.13 22.5811.34 21.638.09 18.38

11.87 20.2711.66 22.1611.66 23.4213.13 25.2010.08 21.6312.81 21.4215.65 21.6314.18 22.0517.12 22.379.77 22.79

15.33 22.7916.28 22.7913.44 22.79

44 SuperLine

9.40 175 1159.50 175 1159.60 184 1219.70 | |9.80 | |9.90 | |

10.00 | |10.10 | |10.20 | |10.30 | |10.40 | |10.50 184 12111.00 195 12811.50 195 12812.00 205 13412.50 | |13.00 205 13413.50 214 14014.00 214 140

Tool material HSCO



Surface finish

Ø-range mm

9.40 … 14.00

Diameter Lengths




bright TiN

13.97 22.7912.39 22.7919.22 24.0524.68 25.2017.12 26.9922.58 29.3016.17 31.7117.12 34.5517.96 36.9618.48 39.8019.11 39.8020.16 40.4324.05 48.0924.68 48.6222.58 49.2526.99 53.9729.30 58.5931.71 59.7534.02 62.16

45SuperLine

from 1.0 – 10.5 mmin increments of 0.5 mmsupplementary sizes3.3/4.2/6.8/10.2

24 7,018

from 1.0 – 13.0 mmin increments of 0.5 mm 25 7,014



Tool material HSCO

Guhring no. 201

Consisting of 5523

Type GU 500 DZ

Surface finish

Compositionof drill set

Drillsper set

Code-no.

Unit price in £

Tool material HSS

Guhring no. 201

Consisting of 9651

Type N


Compositionof drill set

Drillsper set

Code-no.

Unit price in £

Sets of jobber drills, right-hand cutting DIN 338

49.90

57.54

36.63

66.79

46

≤500>500-850≤850850-1000≤ 700700-850850-1000850-≤10001000-1200≤750850-≤10001000-1200≥850-≤1000>1000-1200≤850>850-1000≥650-1000

≤330 HB≤850≤850≤850

≤40-48 HRC>48-60 HRC

≤1200≤240 HB <300 HB ≤220 HB <300 HB

800-1000 1200-1400

≤240 HB<300 HB≤350 HB

≤850 >850-1200≤400≤450≤600≤600≤450≤400≤600≤600≤600 >600-850≤850>850-1000

K/PRT 100 U

55105610

145 7120 6170 8145 8130 8125 7120 7120 7105 7145 8120 785 5110 7105 580 665 5

60 360 555 545 555 335 235 4195 9160 9

140 9130 840 345 440 3310 9310 9260 9220 9280 8125 7325 8220 7125 7105 690 680 6

≤3×DK/P

RT 100 U

55145614

130 7110 6145 8110 7120 7110 7105 7105 7100 6130 8120 785 5100 690 565 655 5

45 355 445 445 345 325 225 4210 8155 8

155 7125 735 340 435 3

260 9260 9220 9180 8260 8105 7270 8180 7105 685 680 560 5

≤3×D

SuperLine

SL programGuhringNavigator Drilling Tools Application recommendations

bright

TiAlN nanoA-coated

FIRE-coated

Tools with bold feed column no. are preferred choice.

F

General recommendations: For safety reasons it is very important, that a drill does not exceed a speed of n = 6,000 rev./min when unsupported. The centrifugal forces can break these long tools before reaching the workpiece surface!

Application recommendations for 7xD, 10xD and 12xD drills: Pilot holes are necessary for extra length SL drills ≥7 xD:1.) the pilot hole can be produced with a short, rigid drill. The diameter should be 0.01 - 0.02 mm larger than the diameter of the SL drill, the drilling depth > 1 x D.

2.) alternatively SL drills can produce their own pilot hole. Cutting speed and feed rate should be reduced by 30-40%.

The recommended minimum coolant pressure is 40 bar.

Application recommendations RT 100 VA: Powerful machines, no play in spindlebearings, alignment accurate tool holders. Max. concentricity error of clamped tools 0.02 mm, high coolant pressures. We recommend the application of hydraulic chucks or shrink fit chucks.

Coolant hints:We recommend lubrication by soluble oil or neat oil. Under special conditions coo-ling just by air is possible. But instead ofair cooling we would always preferminimal quantity lubrication, that thetools are especially suited for. WithMQL we recommend the conical shankend and the Guhring MQL components.

For RT 100 VA drills with nom. diameter ≤ 10 mm please choose feed column no. 3, for nom. diameter > 10 mm please choose feed column no. 2.

Material group Material examples, new description (old description in brackets) Figures in bold = material no. to DIN EN

Tensile strength Hardness MPa (N/mm2)

Cool-ant

Common structural steels 1.0035 S185(St33),1.0486 P275N(StE285),1.0345 P235GH(H1),1.0425 P265GH(H2)1.0050 E295 (St50-2), 1.0070 E360 (St70-2), 1.8937 P500NH (WStE500)

Free-cutting steels 1.0718 11SMnPb30 (9SMnPb28), 1.0736 11SMn37 (9SMn36)1.0727 46S20 (45S20), 1.0728 (60S20), 1.0757 46SPb20 (45SPb20)

Unalloyed heat-treatable 1.0402 C22, 1.1178 C30E (Ck30)steels 1.0503 C45, 1.1191 C45E (Ck45)

1.0601 C60, 1.1221 C60E (Ck60)Alloyed heat-treatable steels 1.5131 50MnSi4, 1.7003 38Cr2, 1.7030 28Cr4

1.5710 36NiCr6, 1.7035 41Cr4, 1.7225 42CrMo4Unalloyed case hard. steels 1.0301 (C10), 1.1121 C10E (Ck10)Alloyed case hardened steels 1.7043 38Cr4

1.5752 15NiCr13 (15NiCr13), 1.7131 16MnCr5, 1.7264 20CrMo5Nitriding steels 1.8504 34CrAl6

1.8519 31CrMoV9, 1.8550 34CrAlNi7Tool steels 1.1750 C75W, 1.2067 102Cr6, 1.2307 29CrMoV9

1.2080 X210Cr12, 1.2083 X42Cr13, 1.2419 105WCr6, 1.2767 X45NiCrMo4High speed steels 1.3243 S 6-5-2-5, 1.3343 S 6-5-2, 1.3344 S 6-5-3Spring steels 1.5026 55Si7, 1.7176 55Cr3, 1.8159 51CrV4 (51CrV4)Stainless steels, sulphured 1.4005 X12CrS13, 1.4104 X14CrMoS17, 1.4105 X6CrMoS17, 1.4305 X8CrNiS18-9 austenitic 1.4301 X5CrNi18-10 (V2A), 1.4541 X6CrNiTi18-10, 1.4571 X6CrNiMoTi 17-12-2 (V4A) martensitic 1.4057 X20CrNi 17 2 (X17CrNi16-2), 1.4122 X39CrMo17-1, 1.4521 X2CrMoTi18-2Hardened steels –

Special alloys Nimonic, Inconel, Monel, HastelloyCast iron 0.6010 EN-GJL-100(GG10), 0.6020 EN-GJL-200(GG20)

0.6025 EN-GJL-250(GG25), 0.6035 EN-GJL-350(GG35)New cast materials CGI EN-GJV250 (GGV25), EN-GJV350 (GGV35)

EN-GJV400 (GGV40), EN-GJV500 (GGV50), SiMo 6New cast materials ADI EN-GJS-800-8 (ADI800), EN-GJS-1000-5 (ADI1000)

EN-GJS-1200-2 (ADI1200), EN-GJS-1400-1 (ADI1400)Spheroidal graphite iron and 0.7050 EN-GJS-500-7(GGG50), 0.8035 EN-GJMW-350-4(GTW35)malleable cast iron 0.7070 EN-GJS-700-2(GGG70), 0.8170 EN-GJMB-700-2(GTS70)Chilled cast iron –Ti and Ti-alloys 3.7024 Ti99,5, 3.7114 TiAl5Sn2,5, 3.7124 TiCu2

3.7154 TiAl6Zr5, 3.7165 TiAl6V4, 3.7184 TiAl4Mo4Sn2,5, - TiAl8Mo1V1Aluminium and Al-alloys 3.0255 Al99,5, 3.2315 AlMgSi1, 3.3515 AlMg1Al wrought alloys 3.0615 AlMgSiPb, 3.1325 AlCuMg1, 3.3245 AlMg3Si, 3.4365 AlZnMgCu1,5Al cast alloys ≤ 10 % Si 3.2131 G-AlSi5Cu1, 3.2153 G-AlSi7Cu3, 3.2573 G-AlSi9 > 10 % Si 3.2581 G-AlSi12, 3.2583 G-AlSi12Cu, - G-AlSi12CuNiMgMagnesium alloys 3.5200 MgMn2, 3.5812.05 G-MgAl8Zn1, 3.5612.05 G-MgAl6Zn1Copper, low-alloyed 2.0070 SE-Cu, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPbBrass, short-chipping 2.0380 CuZn39Pb2, 2.0401 CuZn39Pb3, 2.0410 CuZn43Pb2 long-chipping 2.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,5Bronze, short-chipping 2.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn

2.0790 CuNi18Zn19PbBronze, long-chipping 2.0916 CuAl5, 2.0960 CuAl9Mn, 2.1050 CuSn10

2.0980 CuAl11Ni, 2.1247 CuBe2

Drill Ømm

Feed column no.1 2 3 4 5 6 7 8 9

f (mm/rev.)0.50 0.004 0.006 0.007 0.008 0.010 0.012 0.014 0.016 0.0191.00 0.006 0.008 0.012 0.014 0.016 0.018 0.020 0.023 0.0252.00 0.020 0.025 0.032 0.040 0.050 0.063 0.080 0.100 0.1252.50 0.025 0.032 0.040 0.050 0.063 0.080 0.100 0.125 0.1603.15 0.032 0.040 0.050 0.063 0.080 0.100 0.125 0.160 0.1604.00 0.040 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.2005.00 0.040 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.2506.30 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.250 0.3158.00 0.063 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.315

10.00 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.400 0.40012.50 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.400 0.50016.00 0.100 0.125 0.160 0.200 0.250 0.315 0.400 0.500 0.63020.00 0.125 0.160 0.200 0.250 0.315 0.400 0.500 0.630 0.63025.00 0.160 0.200 0.250 0.315 0.400 0.500 0.630 0.800 0.80031.50 0.160 0.200 0.250 0.315 0.400 0.500 0.630 0.800 1.00040.00 0.200 0.250 0.315 0.400 0.500 0.630 0.800 1.000 1.25050.00 0.250 0.310 0.400 0.500 0.630 0.800 1.000 1.250 1.25063.00 0.315 0.400 0.500 0.630 0.800 1.000 1.250 1.600 1.60080.00 0.400 0.500 0.630 0.800 1.000 1.250 1.600 1.600 2.000

Cooling: without coolant ducts with coolant ducts

Coolant: Air Neat oil Soluble oil

Cutting direction: right-hand cutting

Tool materialCarbide grade

TypeSurface finish

Cooling

Gu

hr.

no. DIN

6537HAHE

G.S.HAHE

Feed col.no.

Carbide

vcm/min

vcm/min

Feed col.no.

Carbide

47

≤3×DK/P

RT 100 U

55115611

K/PRT 100 U

55145614

K/PRT 100 VA

85108610

K/PRT 100 U

55155615

K/PRT 100 U

55125612

K/PRT 100

5525

KRT 150 GG

5513

KFT 200 G

5518

145 7120 6170 8145 8130 8125 7120 7120 7105 7145 8120 785 5110 7105 580 665 5

60 360 555 545 555 335 235 4210 9160 9

140 9130 840 345 440 3310 9310 9260 9220 9280 8125 7325 8220 7125 7105 690 680 6

130 7110 6145 8110 7120 7110 7105 7105 7100 6130 8120 785 5100 690 565 655 5

45 355 445 445 345 325 225 4210 8155 8

155 7125 735 340 435 3260 9260 9220 9180 8260 8105 7270 8180 7105 685 680 560 5

80 560 3/2*80 5

30 2

35 2

130 7110 6145 8110 7120 7110 7105 7105 7100 6130 8120 785 5100 690 565 655 5

45 355 445 445 345 325 225 4195 8155 8

145 7125 735 340 435 3

260 9260 9220 8170 8260 8105 7270 8180 7105 685 680 560 5

145 6120 5170 7145 7130 7125 6120 6120 6105 6145 7120 685 4110 6105 480 565 460 460 260 455 445 455 235 135 3210 8180 8

160 8130 740 240 340 2310 8310 8260 8220 8280 7125 6325 7220 6125 6105 590 580 5

110 8110 8120 8120 8110 6110 8100 7110 7110 6110 8110 7110 6100 580 5100 680 550 550 5100 560 3100 550 4

30 2140 8100 8100 6100 690 8

140 8100 8

220 7180 7

120 1120 8

120 6100 6

90 680 640 2

410 8410 8380 8330 8

280 7

110 680 5

100 680 6

80 670 6

180 7160 7150 7120 6180 6

180 6

≤5×D ≤7×D ≤12×D≤10×DK/P

RT 100 VA

85118611

80 560 3/2*80 5

30 2

35 2

≤3×D

SuperLine

vcm/min

Feed col.no.

Feed col.no.

Feed col.no.

Feed col.no.

Feed col.no.

Feed col.no.

Feed col.no.

Feed col.no.

CarbideCarbide Carbide Carbide Carbide CarbideCarbideCarbide

vcm/min

vcm/min

vcm/min

vcm/min

vcm/min

vcm/min

vcm/min

Feed col.no.

Carbide

vcm/min

48

≤500>500-850≤850850-1000≤ 700700-850850-1000850-≤10001000-1200≤750850-≤10001000-1200≥850-≤1000>1000-1200≤850>850-1000≥650-1000

≤330 HB≤850≤850≤850

≤40-48 HRC>48-60 HRC

≤1200≤240 HB <300 HB ≤240 HB<300 HB≤350 HB

≤850 >850-1200≤400≤450≤600≤600≤450≤400≤600≤600≤600 >600-850≤850>850-1000

–– ––

SuperLine

Material group Material examples, new description (old description in brackets)Figures in bold = material no. to DIN EN

Tensile strength HardnessMPa (N/mm2)

Cool-ant

Common structural steels 1.0035 S185(St33),1.0486 P275N(StE285),1.0345 P235GH(H1),1.0425 P265GH(H2)1.0050 E295 (St50-2), 1.0070 E360 (St70-2), 1.8937 P500NH (WStE500)

Free-cutting steels 1.0718 11SMnPb30 (9SMnPb28), 1.0736 11SMn37 (9SMn36)1.0727 46S20 (45S20), 1.0728 (60S20), 1.0757 46SPb20 (45SPb20)

Unalloyed heat-treatable steels 1.0402 C22, 1.1178 C30E (Ck30)1.0503 C45, 1.1191 C45E (Ck45)1.0601 C60, 1.1221 C60E (Ck60)

Alloyed heat-treatable steels 1.5131 50MnSi4, 1.7003 38Cr2, 1.7030 28Cr41.5710 36NiCr6, 1.7035 41Cr4, 1.7225 42CrMo4

Unalloyed case hardened steels 1.0301 (C10), 1.1121 C10E (Ck10)Alloyed case hardened steels 1.7043 38Cr4

1.5752 15NiCr13 (15NiCr13), 1.7131 16MnCr5, 1.7264 20CrMo5Nitriding steels 1.8504 34CrAl6


1.2080 X210Cr12, 1.2083 X42Cr13, 1.2419 105WCr6, 1.2767 X45NiCrMo4High speed steels 1.3243 S 6-5-2-5, 1.3343 S 6-5-2, 1.3344 S 6-5-3Spring steels 1.5026 55Si7, 1.7176 55Cr3, 1.8159 51CrV4 (51CrV4)Stainless steels, sulphured 1.4005 X12CrS13, 1.4104 X14CrMoS17, 1.4105 X6CrMoS17, 1.4305 X8CrNiS18-9 austenitic 1.4301 X5CrNi18-10 (V2A), 1.4541 X6CrNiTi18-10, 1.4571 X6CrNiMoTi 17-12-2 (V4A) martensitic 1.4057 X20CrNi 17 2 (X17CrNi16-2), 1.4122 X39CrMo17-1, 1.4521 X2CrMoTi18-2Hardened steels –


0.6025 EN-GJL-250(GG25), 0.6035 EN-GJL-350(GG35)Spheroidal graphite iron and 0.7050 EN-GJS-500-7(GGG50), 0.8035 EN-GJMW-350-4(GTW35)malleable cast iron 0.7070 EN-GJS-700-2(GGG70), 0.8170 EN-GJMB-700-2(GTS70)Chilled cast iron –Ti and Ti-alloys 3.7024 Ti99,5, 3.7114 TiAl5Sn2,5, 3.7124 TiCu2

3.7154 TiAl6Zr5, 3.7165 TiAl6V4, 3.7184 TiAl4Mo4Sn2,5, - TiAl8Mo1V1Aluminium and Al-alloys 3.0255 Al99,5, 3.2315 AlMgSi1, 3.3515 AlMg1Al wrought alloys 3.0615 AlMgSiPb, 3.1325 AlCuMg1, 3.3245 AlMg3Si, 3.4365 AlZnMgCu1,5Al cast alloys ≤ 10 % Si 3.2131 G-AlSi5Cu1, 3.2153 G-AlSi7Cu3, 3.2573 G-AlSi9 > 10 % Si 3.2581 G-AlSi12, 3.2583 G-AlSi12Cu, - G-AlSi12CuNiMgMagnesium alloys 3.5200 MgMn2, 3.5812.05 G-MgAl8Zn1, 3.5612.05 G-MgAl6Zn1Copper, low-alloyed 2.0070 SE-Cu, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPbBrass, short-chipping 2.0380 CuZn39Pb2, 2.0401 CuZn39Pb3, 2.0410 CuZn43Pb2 long-chipping 2.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,5Bronze, short-chipping 2.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn


2.0980 CuAl11Ni, 2.1247 CuBe2Duroplastics Bakelit, Resopal, Pertinax, MoltoprenThermoplastics Plexiglass, Hostalen, Novodur, MakralonKevlar KevlarGlass, carbon concent. plastics GFK/CFK

Drill Ømm

Feed column no.1 2 3 4 5 6 7 8 9

f (mm/rev.)0.50 0.004 0.006 0.007 0.008 0.010 0.012 0.014 0.016 0.0191.00 0.006 0.008 0.012 0.014 0.016 0.018 0.020 0.023 0.0252.00 0.020 0.025 0.032 0.040 0.050 0.063 0.080 0.100 0.1252.50 0.025 0.032 0.040 0.050 0.063 0.080 0.100 0.125 0.1603.15 0.032 0.040 0.050 0.063 0.080 0.100 0.125 0.160 0.1604.00 0.040 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.2005.00 0.040 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.2506.30 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.250 0.3158.00 0.063 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.315

10.00 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.400 0.40012.50 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.400 0.50016.00 0.100 0.125 0.160 0.200 0.250 0.315 0.400 0.500 0.63020.00 0.125 0.160 0.200 0.250 0.315 0.400 0.500 0.630 0.63025.00 0.160 0.200 0.250 0.315 0.400 0.500 0.630 0.800 0.80031.50 0.160 0.200 0.250 0.315 0.400 0.500 0.630 0.800 1.00040.00 0.200 0.250 0.315 0.400 0.500 0.630 0.800 1.000 1.25050.00 0.250 0.310 0.400 0.500 0.630 0.800 1.000 1.250 1.25063.00 0.315 0.400 0.500 0.630 0.800 1.000 1.250 1.600 1.60080.00 0.400 0.500 0.630 0.800 1.000 1.250 1.600 1.600 2.000

Coolant: Air Neat oil Soluble oil

* Cutting lip corrected to appr. 10°

General recommendations: For safety reasons it is very important, that a drill does not exceed a speed of n = 6,000 rev./min when unsupported. The centrifugal forces can break these long tools before reaching the workpiece surface!

SL programGuhringNavigator Drills Application recommendations

bright

TiN-coated

UF Ultra fine grain


* Use tools with large back taper

S

49

HSS-E-PM–

GT 500

5521

HSS-E-PM–

GT 500

5522

K10/K20N

5516

K10/K20N

5517

40 632 545 640 542 640 528 425 420 340 422 418 320 415 325 415 315 312 215 410 312 3

50 640 645 632 68 3

50 5

60 550 545 440 432 425 4

40 632 545 640 542 640 528 425 420 340 422 418 320 415 325 415 315 312 215 410 312 3

50 640 645 632 68 3

50 5

60 550 545 440 432 425 4

HSCO– –GU 500

5524 5520

HSCO– –GU 500

5523 5519

35 45 6 630 35 5 540 50 6 630 40 6 632 42 6 628 35 6 620 22 5 515 18 4 413 15 3 330 40 6 616 20 4 412 15 3 315 18 4 410 12 3 315 18 4 410 13 3 310 13 3 3

14 18 4 410 12 4 412 15 4 4

36 45 6 630 36 6 630 40 6 622 28 6 6

50 70 7 750 70 7 765 85 7 760 70 6 660 70 6 625 32 5 545 63 5 530 40 5 536 50 4 430 35 4 430 32 4 425 28 4 420 25 4 415 15 4 4

35 45 6 630 35 5 540 50 6 630 40 6 632 42 6 628 35 6 620 22 5 515 18 4 413 15 3 330 40 6 616 20 4 412 15 3 315 18 4 410 12 3 315 18 4 410 13 3 310 13 3 3

14 18 4 410 12 4 412 15 4 4

36 45 6 630 36 6 630 40 6 622 28 6 6

50 70 7 750 70 7 765 85 7 760 70 6 660 70 6 625 32 5 545 63 5 530 40 5 536 50 4 430 35 4 430 32 4 425 28 4 420 25 4 415 15 4 4

25 425 325 320 3

15 290 480 470 460 4

20 315 2

200 7200 7150 6120 6180 580 5*180 5*180 5*120 5120 570 450 350 440 3

80 3

25 425 325 320 3

15 290 480 470 460 4

20 315 2

200 7200 7150 6120 6180 580 5*180 5*180 5*120 5120 570 450 340 450 3

80 3

HSCO– –GU 500

5536 5537

29 32 6 622 25 5 532 35 6 625 28 6 625 28 6 622 25 6 613 15 5 512 13 4 411 12 3 325 28 6 612 14 4 411 12 3 312 13 4 47 8 3 312 13 4 49 10 3 39 10 3 3

12 13 4 47 8 4 411 12 4 4

29 32 6 623 26 6 625 28 6 618 20 6 6

45 50 7 745 50 7 754 60 7 745 50 6 645 50 6 621 24 5 545 50 5 525 28 5 531 35 4 422 25 4 422 24 4 418 20 4 416 18 4 411 12 4 4

Feed col.no.

vcm/min

vcm/min

≤10×D

SuperLine

≤3×D drilling depth ≤5×D drilling depthTool materialCarbide grade

TypeSurface finish

Gu

hri

ng

no.

stra

igh

t

DIN 1897DIN 338DIN 340DIN 6539G.S.

Feed col.no.

Feed col.no.

Feed col.no.

Feed col.no.

Feed columnno.

Feed columnno.

vcm/min

vcm/min

vcm/min

vcm/min

vcm/min

vcm/min

vcm/min

vcm/min

Carbide Carbide

50

RF 100 U • • • • • •RF 100 F • • • •RF 100 A • •RF 100 SF • • • • • • • • • • •• •

400

300

200

100

0

0 0.5 1.0 1.5 2.0

400

300

200

100

0

0 0.5 1.0 1.5 2.0

SuperLine

The cutting force comparison between a conventional milling cutter type N and a RF100 clearly shows the quieter, more rigid operation of the RF100.

Ff in

[N

]Ff

in [

N]

Milling length section [mm]

Type N

RF 100

Material(ISO-code)

Ste

el

Cas

t ir

on

Sta

inle

ss

stee

l

Alu

min

ium

Ti-

spec

ial

allo

ys

Har

den

ed

stee

l

Hardnesstensile strength

up t

o 85

0 N

/mm

2

abov

e 85

0 N

/mm

2

up t

o 18

0 H

B 3

0

abov

e 18

0 H

B 3

0

up t

o 75

0 N

/mm

2

abov

e 75

0 N

/mm

2

up t

o 3%

Si

abov

e 3

% S

i

Ti-b

ased

Ni-b

ased

up t

o 52

HR

C

abov

e 52

HR

C

= optimal suitability = limited suitability

Guhring solid carbide Ratio end mills type RF 100

We have developed the Ratio end mill with uneven helix angle pri-marily to prevent chattering and the so-called corkscrew effect (as found when withdrawing tools having a large helix angle).

However, the uneven helix angle does not only combat these two unwanted effects but offers the following additional advantages:

Summary of advantages• suitable for roughing and finishing• up to 60% higher feed rates• up to 4-times longer tool life• vibration-free operation• improved workpiece surface quality

with micro-corner protection for longer tool life

12 3

4 1

2 3

4 1

23 4

35°

38°

35°

38°

1

2

3

4

Guhring’s Ratio end mills offer a very simple, but highly efficient solution in order to provide optimal rigidity during the machining process. The cutting edges possess different helix angles. Subsequently, Ratio end mills have an uneven cutting edge spacing that effectively suppresses the rege-nerative effect.

In contrast to the heavy chattering characteristics displayed by a tool with an even cutting edge spacing, the milling process with a Ratio end mill from Guhring is chatter-free resulting in an improved workpiece surface quality as well as an increased profile accuracy and an improved tool life.

Cutting edge runout

End mill centre

End mill face

Cutting edges

Flute form relative to the tool axis

SL program Milling cutters

51SuperLine

6.00 6 54 10 8.00 8 58 1210.00 10 66 1412.00 12 73 1614.00 14 75 1816.00 16 82 2218.00 18 84 2420.00 20 92 26

Ratio unequal helix end mills RF 100, 4-fluted DIN 6527 short

FIRE *with highly unequal helix angles

Regrinding and

recoating

Net priceper piece


Carbide grade K/P

Guhring no. 5534

Form HB

Type N

Tolerance on cutting diameter h10

Surface finish

Helix angle* 35° and 38°

Ø-range mm

6.00 … 20.00

l2

l1

d1 d2

Diametermm

Lengthsmm

nominalØ

shankØ

totallength

cutting edgelength

d1 d2 l1 l2 Unit price in £

13.7418.3825.9134.1142.4355.3981.5685.39

13.3513.3520.2120.2124.0224.0225.47

52 SuperLine

4.00 6 57 115.00 6 57 136.00 6 57 138.00 8 63 19

10.00 10 72 2212.00 12 83 2614.00 14 83 2616.00 16 92 3218.00 18 92 3220.00 20 104 3825.00 25 121 45

Ratio unequal helix end mills RF 100, 4-fluted DIN 6527 long

Regrinding and

recoating

Net priceper piece


Carbide grade K/P


Form HA HB

Type N N

Tolerance on cutting diameter h10 h10

Surface finish


Ø-range mm

4.00 … 25.00

l2

l1

d1 d2

Diametermm

Lengthsmm

nominalØ

shankØ

totallength

cutting edgelength



15.86 17.0715.86 17.0716.26 16.9220.88 21.5531.08 31.7340.06 40.8653.14 53.8069.79 70.5998.74 99.55107.21 107.87224.46 231.06

13.3513.3520.1620.1624.0224.0225.4728.01

53

35°38°

SuperLine

• up to 60% higher in feed rates

• longer tool life

• vibration-free machining

• suitable for roughing and finishing

• increased surface quality

Guhring no. 5534 code no 1,0FIRE-coated, short length, cutting over centre, diameters 6, 8, 10, 12 and 16 mm

£ 104.43/set

Guhring no. 5535 code no 1,0FIRE-coated, long length, cutting over centre, diameters 6, 8, 10, 12 and 16 mm

£ 117.65/set

The Super-Line RF 100 Package Deal

54 SuperLine

10.00 10.00 100.00 40.0012.00 12.00 150.00 45.0016.00 16.00 150.00 65.0020.00 20.00 150.00 65.0025.00 25.00 150.00 75.00


Ratio unequal helix end mills RF 100, 4-fluted Guhring std.

Regrinding and

recoating

Net priceper piece

l2

l1

d1

d2


Carbide grade K/P

Guhring no. 5582

Form HA

Type N


Surface finish


Ø-range mm

10.00 … 25.00

l2

l1

d1

d2

Diametermm

Lengthsmm

nominalØ

shankØ

totallength

cutting edgelength


FIRE *with highly unequal helix angles

65.4494.38177.92235.82322.15

13.3520.1624.1425.4728.01

55SuperLine

0.50* 3 38 1.50.60* | | 1.50.80* | | 21.00* | | |1.20* | | |1.50* | | |1.80* 3 38 22.00 6 35 42.50 | 36 53.00 | 36 53.50 | 37 64.00 | 38 74.50 | 38 85.00 | 39 |5.50 | | |5.75 | | |6.00 6 39 86.75 8 42 107.00 | | |7.75 | 42 108.00 8 43 118.70 10 48 |9.00 | | |9.70 | 48 11

10.00 10 50 1312.00 12 55 1514.00 14 58 1516.00 16 62 1818.00 18 70 2020.00 20 75 22

Mini slot drills, 3-fluted Guhring std. short

FIRE *≤ Ø 1.8 mm: straight shank according to DIN 6535 HA


Carbide grade K/P

Guhring no. 5573

Form –

Type N


Surface finish

Helix angle 30°

Ø-range mm

0.50 … 20.00

l2l1

d1

d2

Diametermm

Lengthsmm

nominalØ

shankØ

totallength

cutting edgelength


8.988.987.286.089.406.089.407.948.207.948.207.949.408.989.4010.458.9813.7412.5712.8312.5719.2918.3819.2917.8521.4229.2237.8045.2160.42

56 SuperLine

Mini slot drills, 3-fluted Guhring std. longTool material Carbide-UF

Carbide grade K/P

Guhring no. 5574

Form –

Type N


Surface finish

Helix angle 45°

Ø-range mm

1.00 … 10.00

l2

l1

d1

d2

Diametermm

Lengthsmm

nominalØ

shankØ

totallength

cutting edgelength



FIRE *≤ Ø 1.8 mm: straight shank according to DIN 6535 HA

1.00* 3 38 21.20* | | 21.50* | | 31.80* 3 38 32.00 6 45 42.50 | | 53.00 | | 63.50 | | 64.00 | | 74.50 | | 85.00 | | |5.50 | | 85.75 | | 106.00 6 45 |6.75 8 55 107.00 | | 127.75 | | 128.00 8 | 138.70 10 | 149.00 | | 149.70 | | 16

10.00 10 55 16

7.288.987.288.9810.0510.4510.0510.0510.0510.7110.0510.7110.7110.0514.0113.7413.7413.7418.6417.4518.9118.38

57SuperLine

Ball nose slot drills, 2-fluted DIN 6527 long

FIRE

Regrinding and

recoating

Net priceper piece


Carbide grade K/P


Form HA HB

Type N N

Tolerance on cutting diameter H10 h10

Surface finish

Helix angle 30° 30°

Ø-range mm

0.50 … 20.00

l2 l1

d1 d2

Diametermm

Lengthsmm

nominalØ

shankØ

totallength

cutting edgelength


0.50 3 38 11.00 3 38 21.50 3 38 32.00 6 57 63.00 6 57 74.00 6 57 85.00 6 57 106.00 6 57 108.00 8 63 16

10.00 10 72 1912.00 12 83 2220.00 20 104 32

24.4621.2920.1020.5020.5020.50 21.1520.50 21.1520.50 21.1526.17 26.8433.98 34.6347.46 48.11

120.02

17.4418.8325.4728.01

58 SuperLine

2.00 6 57 63.00 | | 74.00 | | 85.00 | | 106.00 6 57 107.00 8 63 138.00 8 63 169.00 10 72 16

10.00 10 72 1912.00 12 83 2214.00 14 83 2216.00 16 92 2618.00 18 92 2620.00 20 104 32

Slot drills, 2-fluted DIN 6527 long

Regrinding and

recoating

Net priceper piece


Carbide grade K/P


Form HA HB

Type N N


Surface finish

Helix angle 30°

Ø-range mm

2.00 … 20.00

l2

l1

d1 d2

Diametermm

Lengthsmm

nominalØ

shankØ

totallength

cutting edgelength



FIRE

12.31 13.0912.31 13.0911.50 12.3111.50 12.3110.71 11.3718.64 19.2915.07 15.8626.84 27.4922.36 23.0131.99 32.7847.33 47.9957.38 58.0483.29 83.9587.12 88.04

10.1612.1312.1317.4417.4418.7120.1621.37

59SuperLine

3.00 3 75 204.00 4 | 255.00 5 | 306.00 6 75 308.00 8 100 40

10.00 10 100 4012.00 12 150 4514.00 14 | 4516.00 16 | 6518.00 18 | |20.00 20 150 65

3.00 6 50 44.00 | 54 55.00 | 54 66.00 | 54 78.00 8 58 9

10.00 10 66 1112.00 12 73 1214.00 14 75 1416.00 16 82 1618.00 18 84 1820.00 20 92 20

Slot drills, 2-fluted Guhring std.

Regrinding and

recoating

Net priceper piece

Tool material Car.-UF

Carbide grade K/P

Guhring no. 5549

Form –

Type N


Surface finish

Helix angle 30°

Ø-range mm

3.00 … 20.00

l2

l1

d1 d2

Diametermm

Lengthsmm

nom.Ø

shankØ

totallength

cut. edgelength

d1 d2 l1 l2 Unit pr./£

Slot drills, 2-fluted DIN 6527 short

Regrinding

Net priceper piece


Carbide grade K


Form HA HB

Type W* W*

Tolerance on cutting diameter e8 e8

Surface finish

Helix angle 45°

Ø-range mm

3.00 … 20.00

l2l1

d1

d2

Diametermm

Lengthsmm

nom.Ø

shankØ

totallength

cut. edgelength

d1 d2 l1 l2 Unit price/£

bright FIRE *especially for aluminium and non-ferrous metals

16.1217.4518.3818.3835.0343.0966.3680.25106.42124.00141.45

9.79 10.319.79 10.319.79 10.319.79 10.3111.63 12.5716.12 16.7924.20 24.8532.93 33.5837.15 37.9450.37 51.0265.71 66.36

8.039.4913.3513.3514.7016.0717.48

10.6912.1317.4417.4418.7120.1621.37

60 SuperLine


Regrinding

Net priceper piece


Carbide grade K


Form HA HB

Type W* W*

Tolerance on cutting diameter e8 e8

Surface finish

Helix angle 45°

Ø-range mm

3.00 … 20.00

l2l1

d1

d2

Diametermm

Lengthsmm

nominalØ

shankØ

totallength

cutting edgelength



bright *especially for aluminium and non-ferrous metals

3.00 6 57 74.00 | | 85.00 | | 106.00 6 57 108.00 8 63 16

10.00 10 72 1912.00 12 83 2214.00 14 83 2216.00 16 92 2618.00 18 92 2620.00 20 104 32

12.57 13.2212.57 13.2212.57 13.2212.57 13.2213.89 14.5524.85 25.5335.84 36.4843.76 44.5659.09 59.9067.82 68.6292.53 93.33

8.039.4913.3513.3514.7016.0717.48

61SuperLine

Slot drills, 3-fluted DIN 6527 short

Regrinding and

recoating

Net priceper piece


Carbide grade K/P


Form HA HB

Type NH NH


Surface finish

Helix angle 45°

Ø-range mm

3.00 … 20.00

l2 l1

d1

d2

Diametermm

Lengthsmm

nominalØ

shankØ

totallength

cutting edgelength


FIRE

3.00 6 50 44.00 | 54 55.00 | | 66.00 6 54 77.00 8 58 88.00 8 58 99.00 10 66 10

10.00 10 66 1112.00 12 73 1214.00 14 75 1416.00 16 82 1618.00 18 84 1820.00 20 92 20

12.31 13.0911.50 12.3111.50 12.3111.50 12.3118.12 18.7716.66 17.3324.99 25.6523.27 24.2029.22 30.0140.32 41.1355.92 49.3163.45 64.1184.07 85.00

13.3514.7814.7820.1620.1621.3721.3722.82

62 SuperLine

2.00 6 57 62.50 | | 73.00 | | |3.50 | | 74.00 | | 84.50 | | 85.00 | | 106.00 6 57 107.00 8 63 138.00 8 63 168.50 10 72 |9.00 | | 16

10.00 10 72 1912.00 12 83 2214.00 14 83 2216.00 16 92 2618.00 18 92 2620.00 20 104 32


Regrinding and

recoating

Net priceper piece


Carbide grade K/P


Form HA HB

Type N N


Surface finish

Helix angle 30°

Ø-range mm

2.00 … 20.00

l2 l1

d1

d2

Diametermm

Lengthsmm

nominalØ

shankØ

totallength

cutting edgelength



FIRE

12.31 13.0913.09 13.7412.31 13.0913.09 13.7411.50 12.3113.35 14.0111.50 12.3110.71 11.3718.64 19.2915.07 15.8627.90 28.5626.84 27.4922.36 23.0131.99 32.7847.33 47.9957.38 58.0483.29 83.9587.12 88.04

13.3514.7814.7814.7820.1620.1621.3721.3722.82

63SuperLine

3.00 6 57 73.50 | | 74.00 | | 84.50 | | 85.00 | | 106.00 6 57 107.00 8 63 138.00 8 63 169.00 10 72 16

10.00 10 72 1912.00 12 83 2214.00 14 83 2216.00 16 92 2618.00 18 92 2620.00 20 104 32

8.00 8 63 1610.00 10 72 1912.00 12 83 2216.00 16 92 2620.00 20 104 32

Regrinding and

recoating

Net priceper piece


Carbide grade K/P


Form HA HB

Type NH NH


Surface finish

Helix angle 45°

Ø-range mm

3.00 … 20.00

l2 l1

d1

d2

Diametermm

Lengthsmm

nom.Ø

shankØ

totallength

cut. edgelength


Regrinding

Net priceper piece

Tool material Carb.-UF

Carbide grade K

Guhring no. 5544

Form HB

Type WR*


Surface finish

Helix angle 30°

Ø-range mm

8.00 … 20.00

l2

l1

d1 d2

Diametermm

Lengthsmm

nom.Ø

shankØ

totallength

cut. edgelength

d1 d2 l1 l2 Unit pr./£


bright FIRE

13.89 14.5515.34 16.0013.89 14.5515.34 16.0013.89 14.5513.89 14.5518.38 19.0317.45 18.3827.10 27.7625.53 26.1738.74 39.3948.92 49.5866.36 67.0280.90 81.56105.75 106.42

29.2235.8444.5667.02

124.00

10.6912.1316.6518.6920.12

13.3514.7814.7820.1620.1621.3721.3722.82

64 SuperLine

3.00 6 57 84.00 6 57 115.00 6 57 136.00 6 57 138.00 8 63 19

10.00 10 72 2212.00 12 83 2620.00 20 104 38


FIRE

Ball nose end mills, 4-fluted DIN 6527 long

Regrinding and

recoating

Net priceper piece


Carbide grade K/P

Guhring no. 5584

Form HB

Type N


Surface finish

Helix angle 30°

Ø-range mm

3.00 … 20.00

Diametermm

Lengthsmm

nominalØ

shankØ

totallength

cutting edgelength


l2

l1

d1

d2

24.5824.5825.3924.5830.8140.0654.87137.87

17.4418.8325.4728.01

65SuperLine

2.00 6 57 73.00 | | 84.00 | | 115.00 | | 136.00 6 57 137.00 8 63 168.00 8 63 199.00 10 72 19

10.00 10 72 2212.00 12 83 2614.00 14 83 2616.00 16 92 3218.00 18 92 3220.00 20 104 38

End mills, 4-fluted DIN 6527 long

Regrinding and

recoating

Net priceper piece


Carbide grade K/P

Guhring no. 5532

Form HB

Type N


Surface finish

Helix angle 30°

Ø-range mm

2.00 … 20.00

l2

l1

d1 d2

Diametermm

Lengthsmm

nominalØ

shankØ

totallength

cutting edgelength


FIRE

14.4215.4815.0715.8615.8618.6418.6424.2028.8239.0053.9372.0591.88111.96

13.3513.3514.7814.7820.1620.1621.3721.3722.82

66 SuperLine

3.00 3 75 204.00 4 | 255.00 5 | 306.00 6 75 308.00 8 100 40

10.00 10 100 4012.00 12 150 4514.00 14 | 4516.00 16 | 6518.00 18 | |20.00 20 150 65


FIRE

End mills, 4-fluted Guhring std.

Regrinding and

recoating

Net priceper piece


Carbide grade K/P

Guhring no. 5556

Form HA

Type N


Surface finish

Helix angle 30°

Ø-range mm

3.00 … 20.00

l2

l1

d1 d2

Diametermm

Lengthsmm

nominalØ

shankØ

totallength

cutting edgelength


18.3820.3621.9427.7629.2240.8664.1177.3497.70

110.12127.56

13.3514.7820.1620.1621.3721.3722.82

67SuperLine

3.00 6 57 11 64.00 6 57 11 |5.00 6 57 13 |6.00 6 57 13 |8.00 8 63 19 |

10.00 10 72 22 |12.00 12 83 26 |14.00 14 83 26 |16.00 16 92 32 618.00 18 92 32 820.00 20 104 38 825.00 25 121 45 10

End mills, multi-fluted DIN 6527 long

Regrinding and

recoating

Net priceper piece


Carbide grade K/P


Form HA HB

Type NH NH


Surface finish

Helix angle 45°

Ø-range mm

6.00 … 20.00

l2

l1

d1 d2

Diametermm

Lengthsmm

nominalØ

shankØ

totallength

cutting edgelength

no. ofcutting edges


FIRE

20.5019.5518.5117.45 18.3821.29 21.9432.93 33.5843.76 44.5659.90 59.9079.58 80.2592.53 93.33110.12 110.78195.11

13.3514.7820.1620.1621.3721.3722.8228.01

68 SuperLine

6.00 6 75 30 68.00 8 100 40 |

10.00 10 100 40 |12.00 12 150 45 |16.00 16 | 65 620.00 20 150 65 8


FIRE

End mills, multi-fluted Guhring std.

Regrinding and

recoating

Net priceper piece


Carbide grade K/P


Form HA HB

Type NH NH


Surface finish

Helix angle 45°

Ø-range mm

6.00 … 20.00

l2

l1

d1 d2

Diametermm

Lengthsmm

nominalØ

shankØ

totallength

cutting edgelength

no. ofcutting edges


24.99 25.6528.69 29.6051.02 51.8270.59 71.38127.56 128.23191.68 192.34

14.7820.1621.3722.82

69SuperLine

6.00 6 57 138.00 8 63 19

10.00 10 72 2212.00 12 83 2614.00 14 83 2616.00 16 92 3218.00 18 92 3220.00 20 104 38

End mills, 4-fluted DIN 6527 long

Regrinding and

recoating

Net priceper piece


Carbide grade K/P


Form HB HB

Type NRf HR


Surface finish

Helix angle 30° 20°

Ø-range mm

6.00 … 20.00

l2

l1

d1 d2

HR

Diametermm

Lengthsmm

nominalØ

shankØ

totallength

cutting edgelength


FIRE

41.91 52.8848.11 57.1252.22 62.1362.13 73.1186.8598.61 116.86130.75147.40 174.75

14.7820.1620.1621.3721.3722.82

70

42414142414142424241414241404140424042404140

40414041404040404343424344434342424142404040

85 - 105 81 - 99 85 - 105 63 - 77 85 - 105 76 - 94 63 - 77 76 - 94 63 - 77 90 - 110 76 - 94 54 - 66 85 - 105 76 - 94 76 - 94 63 - 77 45 - 55 45 - 55 45 - 55 40 - 50 36 - 44 45 - 55

27 - 33 108 - 132 99 - 121 90 - 110 81 - 99 54 - 66 45 - 55 36 - 44

405 - 495 495 - 605 198 - 242 162 - 198 225 - 275 108 - 132 90 - 110 81 - 99 90 - 110 72 - 88 72 - 88 63 - 77

108 - 132 99 - 121

4241414241414242424141424140414042

424041

4041404140404040

85 - 105 81 - 99 85 - 105 63 - 77 85 - 105 76 - 94 63 - 77 76 - 94 63 - 77 90 - 110 76 - 94 54 - 66 85 - 105 76 - 94 76 - 94 63 - 77 45 - 55

45 - 55 40 - 50 36 - 44

27 - 33 108 - 132 99 - 121 90 - 110 81 - 99 54 - 66 45 - 55 36 - 44

≤500>500-850≤850850-1000≤700700-850850-1000850-10001000-1200≤750850-10001000-1200≥850-10001000-1200≤850850-1000>650-1000

≤330 HB≤750750-800850-1200

≤40-54 HRC>54-60 HRC

≤1200≤240 HB<300 HB≤240 HB<300 HB≤350 HB

≤850850-1200≤450≤450≤600≤600≤450≤400≤600≤600≤600>600-850≤850850-1000––

N N N NH W N NH NH N N NDIN 6527 HA 5730 5507 5549 5505 5506 5742 5743 5585**DIN 6527 HB 5530 5531 5502 5546 5542 5543 5533** 5584** HA 5745 5729* HB 5573 5574 5545 5529*

SuperLine

Milling cutters

* For large cutting depths on unstable machines fz and vc must be reduced or a 4-flute tool RF 100 (Guhring no. 5582) must be applied.** To improve the surface quality, the milling angle should be 10°-15°.

Slot milling

ae = 1 x D ae = 1 x D

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.

1 x D = 75%1,5 x D = 50%

1 x D = 75%1,5 x D = 50%

3 x D = 50% 1 x D = 75%1,5 x D = 50%

1 x D = 75%1,5 x D = 50%

1,5 x D = 75% 1,5 x D = 75%

Material group Material examples Tens. strength Hard-MPa (N/mm2) ness

Common structural steels 1.0035 S185, 1.0486 P275N, 1.0345 P235GH, 1.0425 P265GH1.0050 E295, 1.0070 E360, 1.8937 P500NH

Free-cutting steels 1.0718 11SMnPb30, 1.0736 11SMn371.0727 46 S20, 1.0728 60 S20, 1.0757 46SPb20

Unalloyed heat-treatable 1.0402 C22, 1.1178 C30Esteels 1.0503 C45, 1.1191 C45E

1.0601 C60, 1.1221 C60EAlloyed heat-treatable steels 1.5131 50MnSi4, 1.7003 38Cr2, 1.7030 28Cr4

1.5710 36NiCr6, 1.7035 41Cr4, 1.7225 42CrMo4Unalloyed case hard. steels 1.0301 C10, 1.1121 C10EAlloyed case hardened steels 1.7043 38Cr4

1.5752 15NiCr13, 1.7131 16MnCr5, 1.7264 20CrMo5Nitriding steels 1.8504 34CrAl6


1.2080 X210Cr12, 1.2083 X42Cr13, 1.2419 105WCr6High speed steels 1.3243 S 6-5-2-5, 1.3343 S 6-5-2, 1.3344 S 6-5-3Spring steels 1.5026 55Si7, 1.7176 55Cr3, 1.8159 51CrV4Stainless steels, sulphured 1.4005 X12CrS13, 1.4104 X14CrMoS17, 1.4105 X6CrMoS17 austenitic 1.4301 X5CrNi18-10, 1.4541 X6CrNiTi18-10 martensitic 1.4057 X20CrNi17-2, 1.4122 X39CrMo17-1 Hardened steels –


0.6025 EN-GJL-250(GG25), 0.6035 EN-GJL-350(GG35)Spheroidal graphite and 0.7050 EN-GJS-500-7(GGG50), 0.8035 EN-GJMW-350-4(GTW35)malleable cast iron 0.7070 EN-GJS-700-2(GGG70), 0.8170 EN-GJMB-700-2(GTS70)Chilled cast iron –Ti and Ti-alloys 3.7024 Ti99,5, 3.7114 TiAl5Sn2,5, 3.7124 TiCu2

3.7154 TiAl6Zr5, 3.7164 TiAl6V4, 3.7184 TiAl4Mo4Sn2,5Al and Al-alloys 3.0255 Al99,5, 3.2315 AlMgSi1, 3.3515 AlMg1Al wrought alloys 3.0615 AlMgSiPb, 3.1325 AlCuMg1, 3.3245 AlMg3SiAl cast alloys ≤ 10 % Si 3.2131 G-AlSi5Cu1, 3.2153 G-AlSi7Cu3, 3.2573 G-AlSi9 > 10 % Si 3.2581 G-AlSi12, 3.2583 G-AlSi12Cu, - G-AlSi12CuNiMgMagnesium alloys MgMn2, G-MgAl8Zn1, G-MgAl6Zn3Copper, low-alloyed 2.0070 SE-Cu, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPbBrass, short-chipping 2.0380 CuZn39Pb2, 2.0401 CuZn39Pb3, 2.0410 CuZn43Pb2 long-chipping 2.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,5Bronze, short-chipping 2.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn


2.0980 CuAl11Ni, 2.1247 CuBe2Duroplastics Bakelit, Resopal, Pertinax, MoltoprenThermoplastics Plexiglass, Hostalen, Novodur, Makralon

ap with fz-correction

Cutter-Ømm

Feed column no.

37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

fz (mm/tooth) 2.00 0.001 0.001 0.001 0.002 0.002 0.004 0.005 0.006 0.007 0.008 0.010 0.012 0.014 0.016 0.018 0.0203.00 0.002 0.002 0.003 0.003 0.004 0.007 0.010 0.010 0.010 0.015 0.016 0.013 0.019 0.022 0.024 0.0305.00 0.005 0.006 0.007 0.009 0.010 0.014 0.020 0.020 0.022 0.025 0.026 0.026 0.028 0.030 0.032 0.0386.00 0.006 0.008 0.009 0.011 0.013 0.017 0.024 0.025 0.027 0.031 0.029 0.033 0.039 0.036 0.041 0.0478.00 0.010 0.012 0.014 0.016 0.019 0.024 0.032 0.032 0.035 0.042 0.042 0.047 0.053 0.052 0.058 0.064

10.00 0.013 0.015 0.018 0.021 0.025 0.030 0.038 0.039 0.044 0.050 0.053 0.059 0.065 0.066 0.073 0.08012.00 0.010 0.018 0.022 0.026 0.030 0.036 0.046 0.048 0.052 0.059 0.063 0.072 0.079 0.085 0.090 0.10016.00 0.020 0.023 0.027 0.032 0.038 0.045 0.054 0.058 0.063 0.071 0.079 0.088 0.095 0.100 0.110 0.12020.00 0.023 0.028 0.033 0.038 0.045 0.057 0.066 0.073 0.080 0.090 0.097 0.100 0.110 0.120 0.130 0.14025.00 0.030 0.035 0.040 0.045 0.055 0.065 0.075 0.100 0.120 0.130 0.140 0.150 0.165 0.170 0.180 0.190

Tools with bold feed column no. (FC no.) are preferred choice.

ae = Width of cut

ap = Depth of cut

Tool material Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UFTyp

Gu

hri

ng

no.

Guhring std.Guhring std.

ap = 0.5 x D ap = 0.5 x D ap = 2 x D ap = 0.5 x D ap = 0.5 x D ap = 0.5 x D ap = 0.5 x D ap = 1.5 x D ap = 3 x D ap = 0.05 x D ap = 0.05 x D

71

N N N NH W N NH NH N N NDIN 6527 HA 5730 5507 5549 5505 5506 5742 5743 5585**DIN 6527 HB 5530 5531 5502 5546 5542 5543 5533** 5584** HA 5745 5729* HB 5573 5574 5545 5529*

3938383938383939393838393837383739

38373837

3737

72 - 88 67 - 83 72 - 88 54 - 66 72 - 88 63 - 77 54 - 66 63 - 77 54 - 66 67 - 83 63 - 77 45 - 55 72 - 88 63 - 77 63 - 77 54 - 66 40 - 50

94 - 116 85 - 105 81 - 99 67 - 83

58 - 72 31 - 39

4646454647464645454445434343

297 - 363 360 - 440 144 - 176 117 - 143 171 - 209 81 - 99 72 - 88 67 - 83 72 - 88 63 - 77 63 - 77 54 - 66 81 - 99 72 - 88

94 - 116 89 - 109 94 - 116 69 - 85 94 - 116 84 - 104 69 - 85 84 - 104 69 - 85 99 - 121 84 - 104 59 - 73 94 - 116 84 - 104 84 - 104 69 - 85 49 - 61 49 - 61 49 - 61 45 - 55 39 - 49 49 - 61

29 - 37 118 - 146 108 - 134 99 - 121 89 - 109 59 - 73 49 - 61 39 - 49

217 - 267 178 - 218

118 - 146 99 - 121

99 - 121 79 - 97

43424243424243434342424342414241434143414241

4142414241414141

4344

4444

4342

4241414241414242

4141

41

414042

424041

414041404040404646454647464645454445434343

85 - 105 81 - 99 85 - 105 63 - 77 85 - 105 76 - 94 63 - 77 76 - 94

90 - 110 76 - 94

85 - 105

76 - 94 63 - 77 45 - 55

45 - 55 40 - 50 36 - 44

108 - 132 99 - 121 90 - 110 81 - 99 54 - 66 45 - 55 36 - 44

297 - 363 360 - 440 144 - 176 117 - 143 171 - 209 81 - 99 72 - 88 67 - 83 72 - 88 63 - 77 63 - 77 54 - 66 81 - 99 72 - 88

94 - 116 89 - 109 94 - 116 69 - 85 94 - 116 84 - 104 69 - 85 84 - 104

99 - 121 84 - 104

94 - 116

84 - 104 69 - 85 49 - 61

49 - 61 45 - 55 39 - 49

29 - 37 118 - 146 108 - 134 99 - 121 89 - 109 59 - 73 49 - 61 39 - 49

297 - 363 360 - 440 217 - 267 178 - 218 171 - 209 118 - 146 99 - 121 67 - 83 99 - 121 79 - 97 63 - 7754 - 6681 - 9972 - 88

4342424342424343

4242

42

424143

434142

41424142414141414646434447444445434245434343

48474746474746464547474647454745464546454643

4547464746

45445050484950494848484747464646

171 - 209 157 - 193 171 - 209 126 - 154 171 - 209 153 - 187 126 - 154 153 - 187 126 - 154 189 - 231 153 - 187 117 - 143 171 - 209 153 - 187 153 - 187 126 - 154 94 - 116 94 - 116 94 - 116 81 - 99 76 - 94 49 - 61

54 - 66 220 - 270 202 - 248 180 - 220 157 - 193

94 - 116 76 - 94

810 - 990 720 - 880 405 - 495 324 - 396 450 - 550 216 - 264 198 - 242 162 - 198 198 - 242 153 - 187 153 - 187 126 - 154 216 - 264 198 - 242

136 - 168 45 126 - 154 44 136 - 168 44 100 - 124 43 136 - 168 44 122 - 150 44 100 - 124 43 122 - 150 43 100 - 124 42 151 - 185 44 122 - 150 44 93 - 115 43

136 - 168 44 122 - 150 42 122 - 150 44 100 - 124 42 75 - 93 43 75 - 93 42 75 - 93 43 64 - 80 42 61 - 75 43 39 - 49 41

32 - 40 42 132 - 162 44 121 - 149 43 108 - 132 44 94 - 116 41

56 - 70 42 45 - 57 41

486 - 594 41 432 - 528 41 243 - 297 45 194 - 238 46

118 - 146 45

118 - 146 45 91 - 113 44

75 - 93 43

48474746474746464547474647454745464546454644

454746474644

153 - 187 144 - 176 153 - 187 153 - 187 135 - 165 135 - 165 117 - 143 126 - 154 153 - 187 198 - 242 171 - 209 108 - 132 144 - 176 135 - 165 135 - 165 117 - 143 85 - 105 85 - 105 85 - 105 76 - 94 67 - 83 49 - 61

49 - 61 198 - 242 189 - 231 171 - 209 144 - 176 99 - 121

48474746474746464547474647454745464546454644

454746474644

505048495049484848474746

153 - 187 144 - 176 153 - 187 153 - 187 135 - 165 135 - 165 117 - 143 126 - 154 153 - 187 198 - 242 171 - 209 108 - 132 144 - 176 135 - 165 135 - 165 117 - 143 85 - 105 85 - 105 85 - 105 76 - 94 67 - 83 49 - 61

49 - 61 198 - 242 189 - 231 171 - 209 144 - 176 99 - 121

720 - 880 855 - 1045 342 - 418 288 - 352 405 - 495 180 - 220 171 - 209 162 - 198 180 - 220 171 - 209 198 - 242 189 - 231

SuperLine

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.

1 x D = 75%1,5 x D = 50%

1 x D = 75%1,5 x D = 50%

3 x D = 50% 1 x D = 75%1,5 x D = 50%

1 x D = 75%1,5 x D = 50%

1,5 x D = 75% 1,5 x D = 75%

Fine finishing Trace milling

ae = 1 x D ae = 1 x D ae = 1 x D ae = 1 x D ae = 1 x D ae = 0.05 x D ae = 0.05 x D ae = 0.05 x D ae = 0.05 x D

Tool material Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UFTyp

Gu

hri

ng

no.


ap = 0.5 x D ap = 0.5 x D ap = 2 x D ap = 0.5 x D ap = 0.5 x D ap = 0.5 x D ap = 0.5 x D ap = 1.5 x D ap = 3 x D ap = 0.05 x D ap = 0.05 x D

72

≤500>500-850≤850850-1000≤700700-850850-1000850-10001000-1200≤750850-10001000-1200≥850-10001000-1200≤850850-1000>650-1000

≤330 HB≤750750-800850-1200

≤40-54 HRC>54-60 HRC

≤1200≤240 HB<300 HB≤240 HB<300 HB≤350 HB

≤850850-1200≤450≤450≤600≤600≤450≤400≤600≤600≤600>600-850≤850850-1000––

51505049505049494850504950485048494849484946

4850495049474342

170 - 208 157 - 193 170 - 208 126 - 154 170 - 208 151 - 185 126 - 154 151 - 185 126 - 154 189 - 231 151 - 185 113 - 139 170 - 208 151 - 185 151 - 185 126 - 154 94 - 116 94 - 116 80 - 10070 - 9065 - 70 44 - 54

56 - 70 220 - 270 201 - 247 182 - 224 157 - 193 107 - 131

54 - 86 44 - 72

4746464546464545444646454644464445

454445

4645464543444347474546474645454544

110 - 136 102 - 126 110 - 136 81 - 101 110 - 136 98 - 120 81 - 101 98 - 120 81 - 101

123 - 151 98 - 120 73 - 91

110 - 136 98 - 120 98 - 120 81 - 101 61 - 75

60 - 8055 - 7550 - 65

143 - 175 131 - 161 118 - 146 102 - 126 69 - 85 61 - 75 49 - 61

300 - 380370 - 440150 - 185115 - 145175 - 21580 - 10075 - 9560 - 7575 - 9555 - 70

N N NH W NRf HR N N N N WDIN 6527 HA 5735* 5582 5505 5506 5742 5743 5735 5582 5556DIN 6527 HB 5535* 5534* 5502 5546 5542 5543 5504** 5583** 5535 5534 5532 5543 HA HB

SuperLine

Material group Material examples Tens. strength Hard-MPa (N/mm2) ness

Common structural steels 1.0035 S185, 1.0486 P275N, 1.0345 P235GH, 1.0425 P265GH1.0050 E295, 1.0070 E360, 1.8937 P500NH

Free-cutting steels 1.0718 11SMnPb30, 1.0736 11SMn371.0727 46 S20, 1.0728 60 S20, 1.0757 46SPb20

Unalloyed heat-treatable 1.0402 C22, 1.1178 C30Esteels 1.0503 C45, 1.1191 C45E

1.0601 C60, 1.1221 C60EAlloyed heat-treatable steels 1.5131 50MnSi4, 1.7003 38Cr2, 1.7030 28Cr4

1.5710 36NiCr6, 1.7035 41Cr4, 1.7225 42CrMo4Unalloyed case hard. steels 1.0301 C10, 1.1121 C10EAlloyed case hardened steels 1.7043 38Cr4

1.5752 15NiCr13, 1.7131 16MnCr5, 1.7264 20CrMo5Nitriding steels 1.8504 34CrAl6


1.2080 X210Cr12, 1.2083 X42Cr13, 1.2419 105WCr6High speed steels 1.3243 S 6-5-2-5, 1.3343 S 6-5-2, 1.3344 S 6-5-3Spring steels 1.5026 55Si7, 1.7176 55Cr3, 1.8159 51CrV4Stainless steels, sulphured 1.4005 X12CrS13, 1.4104 X14CrMoS17, 1.4105 X6CrMoS17 austenitic 1.4301 X5CrNi18-10, 1.4541 X6CrNiTi18-10 martensitic 1.4057 X20CrNi17-2, 1.4122 X39CrMo17-1 Hardened steels –


0.6025 EN-GJL-250(GG25), 0.6035 EN-GJL-350(GG35)Spheroidal graphite and 0.7050 EN-GJS-500-7(GGG50), 0.8035 EN-GJMW-350-4(GTW35)malleable cast iron 0.7070 EN-GJS-700-2(GGG70), 0.8170 EN-GJMB-700-2(GTS70)Chilled cast iron –Ti and Ti-alloys 3.7024 Ti99,5, 3.7114 TiAl5Sn2,5, 3.7124 TiCu2

3.7154 TiAl6Zr5, 3.7164 TiAl6V4, 3.7184 TiAl4Mo4Sn2,5Al and Al-alloys 3.0255 Al99,5, 3.2315 AlMgSi1, 3.3515 AlMg1Al wrought alloys 3.0615 AlMgSiPb, 3.1325 AlCuMg1, 3.3245 AlMg3SiAl cast alloys ≤ 10 % Si 3.2131 G-AlSi5Cu1, 3.2153 G-AlSi7Cu3, 3.2573 G-AlSi9 > 10 % Si 3.2581 G-AlSi12, 3.2583 G-AlSi12Cu, - G-AlSi12CuNiMgMagnesium alloys MgMn2, G-MgAl8Zn1, G-MgAl6Zn3Copper, low-alloyed 2.0070 SE-Cu, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPbBrass, short-chipping 2.0380 CuZn39Pb2, 2.0401 CuZn39Pb3, 2.0410 CuZn43Pb2 long-chipping 2.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,5Bronze, short-chipping 2.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn


2.0980 CuAl11Ni, 2.1247 CuBe2Duroplastics Bakelit, Resopal, Pertinax, MoltoprenThermoplastics Plexiglass, Hostalen, Novodur, Makralon

ap with fz-correction

Cutter-Ømm

Feed column no.

37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

fz (mm/tooth) 2.00 0.001 0.001 0.001 0.002 0.002 0.004 0.005 0.006 0.007 0.008 0.010 0.012 0.014 0.016 0.018 0.0203.00 0.002 0.002 0.003 0.003 0.004 0.007 0.010 0.010 0.010 0.015 0.016 0.013 0.019 0.022 0.024 0.0305.00 0.005 0.006 0.007 0.009 0.010 0.014 0.020 0.020 0.022 0.025 0.026 0.026 0.028 0.030 0.032 0.0386.00 0.006 0.008 0.009 0.011 0.013 0.017 0.024 0.025 0.027 0.031 0.029 0.033 0.039 0.036 0.041 0.0478.00 0.010 0.012 0.014 0.016 0.019 0.024 0.032 0.032 0.035 0.042 0.042 0.047 0.053 0.052 0.058 0.064

10.00 0.013 0.015 0.018 0.021 0.025 0.030 0.038 0.039 0.044 0.050 0.053 0.059 0.065 0.066 0.073 0.08012.00 0.010 0.018 0.022 0.026 0.030 0.036 0.046 0.048 0.052 0.059 0.063 0.072 0.079 0.085 0.090 0.10016.00 0.020 0.023 0.027 0.032 0.038 0.045 0.054 0.058 0.063 0.071 0.079 0.088 0.095 0.100 0.110 0.12020.00 0.023 0.028 0.033 0.038 0.045 0.057 0.066 0.073 0.080 0.090 0.097 0.100 0.110 0.120 0.130 0.14025.00 0.030 0.035 0.040 0.045 0.055 0.065 0.075 0.100 0.120 0.130 0.140 0.150 0.165 0.170 0.180 0.190

Tools with bold feed column no. (FC no.) are preferred choice.

ae = Width of cut

ap = Depth of cut

Roughing

ae = 0.5-1.0 x D ae = 0.25 x D

* With this application, optimal chip evacuation must be ensured. Slot milling only recommended > Ø 5 mm.** In the event of excessive edge wear through vibration, the feed rate should be reduced by 30%.

Milling cuttersSchneidstoff Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF

Typ

Gu

hri

ng

no.


ap = 1 x D ap = 2 x D ap = 1 x D ap = 1 x D ap =1 x D ap = 1 x D ap = 1 x D ap = 2 x D ap = 1 x D ap = 2 x D ap = 1 x D

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.

ap 1.5 x D = 50%ae 0.25 x D = 150%

ap 0.5 x D = 75%ap 2 x D = 50%

ap 0.5 x D = 120%ap 2 x D = 50%

ap 0.5 x D = 120%ap 2 x D = 50%

ap 1.5 x D = 50%ae 0.25xD = 140%

ap 0.5 x D = 120% ap 2 x D = 50% ap 3 x D = 50% ap 2 x D = 50% ap 3 x D = 50% ap 2 x D = 50%

73

N N NH W NRf HR N N N N WDIN 6527 HA 5735* 5582 5505 5506 5742 5743 5735 5582 5556DIN 6527 HB 5535* 5534* 5502 5546 5542 5543 5504** 5583** 5535 5534 5532 5543 HA HB

4646444546454444444343424242

297 - 363 360 - 440 144 - 176 117 - 143 171 - 209 81 - 99 72 - 88 67 - 83 72 - 88 63 - 77 63 - 77 54 - 66 81 - 99 72 - 88

170 - 208157 - 193170 - 208126 - 154170 - 208151 - 185126 - 154151 - 185126 - 154189 - 231151 - 185113 - 139170 - 208151 - 185151 - 185126 - 15494 - 116 67 - 83 67 - 83 58 - 72 54 - 66 31 - 39

40 - 50 157 - 193 144 - 176 130 - 160 112 - 138 76 - 94 67 - 83 54 - 66

117 - 143

63 - 77 63 - 77 54 - 66 81 - 99 72 - 88

49484847484847474648484748464846474647464744

4648474847454645

45

4343424242

39

4140413941394726

403838

4241424139

42

4241

72 - 88

86 - 106 64 - 80 97 - 119 86 - 106 86 - 106 72 - 88 54 - 66 54 - 66

43 - 53 25 - 31 18 - 22

126 - 154 115 - 141 104 - 128 90 - 110 61 - 75

117 - 143

117 - 14387 - 107

43424241424241414042424142404240

41404138

4244434443

4140

444444434342

97 - 119 90 - 110 97 - 119 72 - 88 97 - 119 86 - 106 72 - 88 86 - 106 72 - 88

108 - 132 86 - 106 64 - 80 97 - 119 86 - 106 86 - 106 72 - 88

54 - 66 46 - 58 43 - 53 25 - 31

32 - 40

126 - 154 115 - 141 104 - 128 90 - 110

54 - 66 43 - 53

117 - 14394 - 116117 - 14387 - 10787 - 10772 - 90

4443434243434242414343424341434142

444344

43424342

4140464544454645444444

139 - 171 127 - 157 139 - 171 109 - 135 139 - 171 121 - 149 103 - 127 121 - 149 103 - 127 134 - 164 121 - 149 90 - 112

139 - 171 121 - 149 121 - 149 103 - 127 79 - 97

72 - 9062 - 7558 - 72

182 - 224 163 - 201 152 - 186 127 - 157

79 - 97 61 - 75

220 - 280250 - 300220 - 250200 - 240210 - 260110 - 120100 - 12090 - 110

100 - 120

49484847484847474648484748464846474647464744

4648474847454645

212 - 260 194 - 238 212 - 260 158 - 194 212 - 260 194 - 238 158 - 194 188 - 230 158 - 194 236 - 290 188 - 230 139 - 171 212 - 260 194 - 238 188 - 230 158 - 194 121 - 149 121 - 149 121 - 149 103 - 127 97 - 119 61 - 75

72 - 90 255 - 313 255 - 313 231 - 283 194 - 238 134 - 164 121 - 149 97 - 119

4342424142424141404242414240424041

42414241

403945

4344

44434343

103 - 127 94 - 116

103 - 127 81 - 99

103 - 127 90 - 110 76 - 94 90 - 110 76 - 94

99 - 121 90 - 110 67 - 83

103 - 127 90 - 110 90 - 110 76 - 94 58 - 72

135 - 165 121 - 149 112 - 138 94 - 116

58 - 72 45 - 55

450 - 550

225 - 275 180 - 220

135 - 165 108 - 132 90 - 110

108 - 132

515049

5150494949

48

4747

342 - 418 414 - 506 165 - 203

197 - 241 93 - 115 82 - 102 77 - 95 82 - 102

72 - 90

93 - 115 82 - 102

4847474647474646454747464745474546

464546

454746474644454450

4849

4948484847

157 - 193 144 - 176 157 - 193 117 - 143 157 - 193 144 - 176 117 - 143 139 - 171 117 - 143 175 - 215 139 - 171 103 - 127 157 - 193 144 - 176 139 - 171 117 - 143 90 - 110

90 - 110 76 - 94 72 - 88

54 - 66 189 - 231 189 - 231 171 - 209 144 - 176 99 - 121 90 - 110 72 - 88

765 - 935

373 - 457 306 - 374

198 - 242 180 - 220 144 - 176 180 - 220 135 - 165

SuperLine

Schneidstoff Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UFTyp

Gu

hri

ng

no.


ap = 1 x D ap = 2 x D ap = 1 x D ap = 1 x D ap =1 x D ap = 1 x D ap = 1 x D ap = 2 x D ap = 1 x D ap = 2 x D ap = 1 x D

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.vc

m/minFc no.

vc m/min

Fc no.

ap 1.5 x D = 50%ae 0.25 x D = 150%

ap 0.5 x D = 75%ap 2 x D = 50%

ap 0.5 x D = 120%ap 2 x D = 50%

ap 0.5 x D = 120%ap 2 x D = 50%

ap 1.5 x D = 50%ae 0.25xD = 140%

ap 0.5 x D = 120% ap 2 x D = 50% ap 3 x D = 50% ap 2 x D = 50% ap 3 x D = 50% ap 2 x D = 50%

Finishing

ae = 0.5-1.0 x D ae = 0.5-1.0 x D ae = 0.5-1.0 x D ae = 0.5-1.0 x D ae = 0.1 x D ae = 0.1 x D ae = 0.1 x D ae = 0.1 x D ae = 0.1 x D

74 SuperLine

SL program Machine Taps

for through holes DIN 371Tool material HSS-E PM HSS-E

Guhring no. 5560 5590 5558 5587 5588 5559

Type N N H H VA VA

Form B B B B B B

Tolerance zone ISO 2/6H ISO 2/6H ISO 2/6H ISO 2/6H ISO 2/6H ISO 2/6H

Surface finish S C S

nominal Ø-range

M 3 … M 10d

1

l 1

SW

d 2

l 2 dk

Diametermm

Lengthsmm

nominalØ

pitch shankØ

squareSW

tapping size hole

totallength

thread length



M 3 0.50 3.5 2.7 2.50 56 10M 4 0.70 4.5 3.4 3.30 63 12M 5 0.80 6.0 4.9 4.20 70 14M 6 1.00 6.0 4.9 5.00 80 16M 8 1.25 8.0 6.2 6.80 90 20M 10 1.50 10.0 8.0 8.50 100 22

7.04 11.53 7.52 17.94 12.25 8.987.04 12.01 7.52 17.94 12.37 8.987.04 12.37 8.24 19.29 13.35 9.597.04 14.92 8.24 19.29 16.74 8.989.46 19.65 10.07 21.47 17.94 10.6710.67 21.71 12.61 24.26 22.68 13.23

75SuperLine

for through holes DIN 371Tool material HSS-E

Guhring no. 5561 5586 5557 5550 5595

Type N N Al GG GG

Form B B B C C

Tolerance zone ISO 2/6H ISO 2/6H ISO 2/6H ISO 2/6H 6HX

Surface finish S A

nominal Ø-range

M 3 … M 10

d 1

l 1

SW

d 2

l 2 dk

Diametermm

Lengthsmm

nominalØ

pitch shankØ

squareSW

tapping size hole

totallength

thread length


for cast-materials






M 3 0.50 3.5 2.7 2.50 56 10M 4 0.70 4.5 3.4 3.30 63 12M 5 0.80 6.0 4.9 4.20 70 14M 6 1.00 6.0 4.9 5.00 80 16M 8 1.25 8.0 6.2 6.80 90 20M 10 1.50 10.0 8.0 8.50 100 22

7.04 10.55 7.52 7.52 21.597.04 11.05 7.52 7.52 22.077.04 12.01 8.24 7.52 22.447.04 13.83 8.24 7.52 22.449.46 17.59 9.59 9.59 27.6510.67 21.11 11.53 12.01 35.18

76 SuperLine

M 12 1.75 9 7 10.20 110 24M 16 2.00 12 9 14.00 110 26M 20 2.50 16 12 17.50 140 32

for through holes DIN 376Tool material HSS-E

Guhring no. 5563

Type N

Form B

Tolerance zone ISO 2/6H

Surface finish

nominal Ø-range

M 12 … M 20

d 1

l 1

SW

d2

l 2 dk

Diametermm

Lengthsmm

nominalØ

pitch shankØ

squareSW

tapping size hole

totallength

thread length




17.8326.6840.27

77SuperLine

M 3 0.50 3.5 2.7 2.80 56 10M 4 0.70 4.5 3.4 3.65 63 12M 5 0.80 6.0 4.9 4.65 70 14M 6 1.00 6.0 4.9 5.55 80 16M 8 1.25 8.0 6.2 7.40 90 18M 10 1.50 10.0 8.0 9.25 100 20

for through holes and blind holes ~DIN 371Tool material HSS-E

Guhring no. 5598

Type N

Form C

Tolerance zone 6HX

Surface finish S

nominal Ø-range

M 3 … M 10

Diametermm

Lengthsmm

nominalØ

pitch shankØ

squareSW

tapping size hole

totallength

thread length


for cast-materials






SL program Fluteless Taps

dk

d 1

l 1

SW

d 2

l 2

P

16.8617.3518.4421.3524.3831.29

78 SuperLine

for through holes and blind holes ~DIN 376Tool material HSS-E

Guhring no. 5599

Type N

Form C

Tolerance zone 6HX

Surface finish S

nominal Ø-range

M 12 … M 16

Diametermm

Lengthsmm

nominalØ

pitch shankØ

squareSW

tapping size hole

totallength

thread length


M 12 1.75 9.0 7.0 11.25 110 24M 14 2.00 11.0 9.0 13.10 110 26M 16 2.00 12.0 9.0 15.10 110 26

SL program Fluteless Taps


d k

d 1

l 1

SW d 2

l 2

P

36.8756.0358.58

79SuperLine

Tool material HSS-E

Guhring no. 5554 5592 5552 5591

Type N R40 N R40 H R40 H R40

Form C C C C

Tolerance zone ISO 2/6H ISO 2/6H ISO 2/6H ISO 2/6H

Surface finish S C

nominal Ø-range

M 3 … M 10

d1

l1

SW

d2

l2 dk

Diametermm

Lengthsmm

nominalØ

pitch shankØ

squareSW

tapping size hole

totallength

thread length


for blind holes DIN 371

M 3 0.50 3.5 2.7 2.50 56 6.00M 4 0.70 4.5 3.4 3.30 63 7.50M 5 0.80 6.0 4.9 4.20 70 8.50M 6 1.00 6.0 4.9 5.00 80 11.00M 8 1.25 8.0 6.2 6.80 90 14.00M 10 1.50 10.0 8.0 8.50 100 16.00

for cast-materials






8.98 11.89 7.52 13.098.98 12.98 7.52 13.718.98 13.71 8.24 14.798.98 16.50 8.24 18.8110.67 18.68 10.07 21.7112.61 22.68 12.61 27.90

80 SuperLine

Tool material HSS-E

Guhring no. 5553 5596 5555 5594 5551

Type VA R40 VA R40 N R40 N R40 Al R45

Form C C C C C

Tolerance zone ISO 2/6H ISO 2/6H ISO 2/6H ISO 2/6H ISO 2/6H

Surface finish S S

nominal Ø-range

M 3 … M 10

d1

l1

SW

d2

l2 dk

Diametermm

Lengthsmm

nominalØ

pitch shankØ

squareSW

tapping size hole

totallength

thread length


for blind holes DIN 371

M 3 0.50 3.5 2.7 2.50 56 6.00M 4 0.70 4.5 3.4 3.30 63 7.50M 5 0.80 6.0 4.9 4.20 70 8.50M 6 1.00 6.0 4.9 5.00 80 11.00M 8 1.25 8.0 6.2 6.80 90 14.00M 10 1.50 10.0 8.0 8.50 100 16.00



9.59 13.47 8.98 12.98 7.529.59 13.59 8.98 13.59 7.529.59 13.95 8.98 13.95 8.249.59 14.55 8.98 16.25 8.2412.61 20.25 10.67 18.20 9.5914.55 25.11 12.61 23.53 11.53

81SuperLine

for blind holes DIN 376Tool material HSS-E

Guhring no. 5589

Type N R40

Form C


Surface finish

nominal Ø-range

M 12 … M 20

Diametermm

Lengthsmm

nominalØ

pitch shankØ

squareSW

tapping size hole

totallength

thread length


M 12 1.75 9 7 10.20 110 18.50M 16 2.00 12 9 14.00 110 20.00M 20 2.50 16 12 17.50 140 25.00

for cast-materials






d1

l1

SW

d2

l2 dk

18.5627.1640.88

82 SuperLine


Guhring no. 5593

Type H

Form C


Surface finish

nominal Ø-range

M 4 … M 10IC ≥ M5

Diametermm

Lengthsmm

nominalØ

pitch shankØ

squareSW

tapping size hole

totallength

thread length


for through holes and blind holes DIN 371

M 4 0.70 4.5 3.4 3.30 63 10M 5 0.80 6.0 4.9 4.20 70 10M 6 1.00 6.0 4.9 5.00 80 12M 8 1.25 8.0 6.2 6.80 90 16M 10 1.50 10.0 8.0 8.50 100 18


bright

d 1

l 1

SW

d2

l 2 dk

35.0362.0153.1480.2586.33

83SuperLine

Product information• Ø > 4,0 mm with highly

unequal flute spacing• left hand spiral flutes• tolerance: from Ø 0.98 to 5.03 mm: 0.000/+0.004 from Ø 5.97 to 12.05 mm: 0.000/+0.005

NC machine chucking reamers are si-milar to DIN 8093 with straight shank (h6) for standardised tool clamping in hydraulic or shrink fit chucks. The combination of NC machine chucking reamer and hydraulic, high precision clamping or shrink fit chuck respec-tively offers highest concentricity and process reliability for the production of holes to required tolerances.


Carbide grade K10

Guhring no. 5527

Form

Type

Tolerance see product information

Surface finish

Cutting direction right

Ø-range mm

0.98 … 4.01

Diametermm

Lengths mm

nominalØ

shankØ

total length effective length

flute length no. of flutes

d1 d2 l1 l2 l4 z Unit price in £

SL program Reamers

NC machine chucking reamers Guhring std.

0.980 4 50 22 6 30.990 4 50 22 6 |1.000 4 50 22 6 |1.010 4 50 22 6 |1.020 4 50 22 6 |1.030 4 50 22 9 |1.480 4 50 22 9 |1.490 4 50 22 9 |1.500 4 50 22 9 |1.510 4 50 22 9 |1.520 4 50 22 9 |1.530 4 50 22 9 31.980 4 50 22 12 41.990 4 50 22 12 |2.000 4 50 22 12 |2.010 4 50 22 12 |2.020 4 50 22 12 |2.030 4 50 22 12 |2.480 4 60 32 16 |2.490 4 60 32 16 |2.500 4 60 32 16 |2.510 4 60 32 16 |2.520 4 60 32 16 |2.530 4 60 32 16 42.970 4 64 36 17 62.980 4 64 36 17 |2.990 4 64 36 17 |3.000 4 64 36 17 |3.010 4 64 36 17 |3.020 4 64 36 17 |3.030 4 64 36 17 |3.970 4 77 45 21 |3.980 4 77 45 21 |3.990 4 77 45 21 |4.000 4 77 45 21 |4.010 4 77 45 21 6

bright

d2

l 1

d1

l 4

l2

29.6629.6625.6329.6629.6629.6629.6629.6626.0029.6629.6629.6629.6629.6626.0029.6629.6629.6629.6629.6631.9429.6629.6629.6630.7930.7930.7927.2530.7930.7930.7936.4736.4736.4732.0536.47

84 SuperLine


bright

SL program Reamers





Carbide grade K10

Guhring no. 5527

Form

Type


Surface finish


Ø-range mm

4.20 … 11.97

Diametermm

Lengths mm

nominalØ

shankØ



d1 d2 l1 l2 l4 z Unit price in £4.020 4 77 45 21 64.030 4 77 45 21 |4.970 6 93 59 26 |4.980 6 93 59 26 |4.990 6 93 59 26 |5.000 6 93 59 26 |5.010 6 93 59 26 |5.020 6 93 59 26 |5.030 6 93 59 26 |5.970 6 93 57 26 |5.980 6 93 57 26 |5.990 6 93 57 26 |6.000 6 93 57 26 |6.010 6 93 57 26 |6.020 6 93 57 26 |6.030 6 93 57 26 |7.000 8 109 69 31 |7.970 8 117 75 33 |7.980 8 117 75 33 |7.990 8 117 75 33 |8.000 8 117 75 33 |8.010 8 117 75 33 |8.020 8 117 75 33 |8.030 8 117 75 33 |8.040 8 125 75 33 |9.000 10 133 81 36 |9.970 10 133 87 38 |9.980 10 133 87 38 |9.990 10 133 87 38 |

10.000 10 133 87 38 |10.010 10 133 87 38 |10.020 10 133 87 38 |10.030 10 133 87 38 |10.040 10 133 87 38 |10.050 10 133 87 38 |11.970 12 151 105 44 6

d2

l 1

d1

l 4

l2

36.4736.4739.6239.6239.6236.0939.6239.6239.6242.7842.7842.7839.2443.2843.2843.2839.6254.5154.5154.5149.6054.5154.5154.5154.5154.5162.4762.4762.4759.3162.4762.4762.4762.4762.4775.21

85SuperLine


bright





Carbide grade K10

Guhring no. 5527

Form

Type


Surface finish


Ø-range mm

11.98 … 12.05

Diametermm

Lengths mm

nominalØ

shankØ



d1 d2 l1 l2 l4 z Unit price in £11.980 12 151 105 44 611.990 12 151 105 44 |12.000 12 151 105 44 |12.010 12 151 105 44 |12.020 12 151 105 44 |12.030 12 151 105 44 |12.040 12 151 105 44 |12.050 12 151 105 44 6

d2

l 1

d1

l 4

l2

75.2175.2172.0675.2175.2175.2175.2175.21

86 SuperLine

–

5527

≤330 HB

≤40-48 HRC>48-60 HRC

≤240 HB<300 HB≤240 HB<300 HB≤350 HB

––––

≤500>500-850≤850850-1000≤ 700700-850850-1000850-10001000-1200≤750850-10001000-1200≥850-10001000-1200≤850850-1000≥650-1000

≤850≤850≤850

≤1200

≤850 850-1200≤400≤450≤600≤600≤450≤400≤600≤600≤600>600-850≤850850-100

vcm/min

72 7371

181618161816141412181412141212101010866

6201820184

101030304030252535303530302520202020

7272727271717171717171717171717171

717171

7171717171

717173737272727272727272727273737373

74 75bright


For blind holes with close diameter tolerances choose straight-fluted reamers.

soluble oilneat oilair

Coolant:

< 4.004.005.006.308.00

10.0012.5016.0020.0025.0031.5040.0050.00

> 50.00

0.0800.1000.1000.1250.1600.2000.2000.2500.3150.4000.4000.5000.6300.800

0.1000.1250.1250.1600.2000.2500.2500.3150.4000.5000.5000.6300.8001.000

0.1250.1600.1600.2000.2500.3150.3150.4000.5000.6300.6300.8001.0001.250

Reamer-Ø

mmf (mm/rev.)

Feed column no.

Material examplesFigures in bold = material no. to DIN EN 10 027

Material group Tensile strengthN/mm2

Cool-ant

1.0035 S185, 1.0486 StE P275N, 1.0345 P235GH, 1.0425 P265GH1.0050 E295, 1.0070 E360, 1.8937 P500NH1.0718 11SMnPb30, 1.0736 115Mn371.0727 46 S20, 1.0728 60 S20, 1.0757 46SPb201.0402 C22, 1.1178 C30E1.0503 C45, 1.1191 C45E1.0601 C60, 1.1221 C60E1.5131 50MnSi4, 1.7003 38Cr2, 1.7030 28Cr41.5710 36NiCr6, 1.7035 41Cr4, 1.7225 42CrMo41.0301 C10, 1.1121 C10E1.7043 38Cr41.5752 14NiCr14, 1.7131 16MnCr5, 1.7264 20CrMo51.8504 34CrAl61.8519 31CrMoV9, 1.8550 34CrAlNi71.1750 C75W, 1.2067 102Cr6, 1.2307 29CrMoV91.2080 X210Cr12, 1.2083 X42Cr13, 1.2419 105WCr6, 1.2767 X45NiCrMo41.3243 S 6-5-2-5, 1.3343 S 6-5-2, 1.3344 61CrV41.5026 55Si7, 1.7176 55Cr3, 1.8159 51CrV41.4005 X12CrS13, 1.4104 X14CrMoS17, 1.4105 X6CrMoS17, 1.4305 X8CrNiS18 91.4301 X5CrNi18 10, 1.4541 X6CrNiTi18 10, 1.4571 X6CrNiMoTi 17 12 21.4057 X17CrNi16-1, 1.4122 X39CrMo17-1, 1.4521 X2CrMoTi18 2–

Nimonic, Inconel, Monel, HastelloyEN-GJL-100 ... EN-GJL-200 (previously GG10 ... GG20)EN-GJL-250 ... EN-GJL-350 (previously GG25 ... GG45)EN-GJMW-350-4, EN-GJMB-550-4, EN-GJS-500-7 (prev. GTW35, GTS55, GGG50)EN-GJMB-700-2, EN-GJS-700-2 (prev.GTW65, GTS70, GGG70)–3.7024 Ti99,5, 3.7114 TiAl5Sn2,5, 3.7124 TiCu23.7154 TiAl6Zr5, 3.7164 TiAl6V4, 3.7184 TiAl4Mo4Sn2,5, - TiAl8Mo1V13.0255 Al99,5, 3.2315 AlMgSi1, 3.3515 AlMg13.0615 AlMgSiPb, 3.1325 AlCuMg1, 3.3245 AlMg3Si, 3.4365 AlZnMgCu1,53.2131 G-AlSi5Cu1, 3.2153 G-AlSi7Cu3, 3.2573 G-AlSi93.2581 G-AlSi12, 3.2583 G-AlSi12Cu, - G-AlSi12CuNiMgMgMn2, G-MgAl8Zn1, G-MgAl6Zn32.0070 SE-Cu, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPb2.0380 CuZn39Pb2, 2.0401 CuZn39Pb3, 2.0410 CuZn43Pb22.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,52.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn2.0790 CuNi18Zn19Pb2.0916 CuAl5, 2.0960 CuAl9Mn, 2.1050 CuSn102.0980 CuAl11Ni, 2.1247 CuBe2Bakelit, Resopal, Pertinax, MoltoprenPlexiglass, Hostalen, Novodur, MakralonKevlarGFK/CFK

Common structural steels

Free-cutting steels

Unalloyed heat-treatable steels

Alloyed heat-treatable steels

Unalloyed case hardened steelsAlloyed case hardened steels

Nitriding steels

Tool steels

High speed steelsSpring steelsStainless steels, sulphured austenitic martensiticHardened steels

Special alloysCast iron

Spheroidal graphite and malleable cast ironChilled cast ironTi and Ti-alloys

Aluminium and Al-alloysAl wrought alloysAl cast iron ≤ 10 % Si > 10 % SiMagnesium alloysCopper, low-alloyedBrass, short-chipping long-chippingBronze, short-chipping

Bronze, long-chipping

DuroplasticsThermoplasticsKevlarGlass, carbon concent. plastics

Hard-ness

0.3000.3000.4000.4000.6000.6000.8000.8000.8001.0001.0001.2001.4001.600

0.5000.5000.7001.0001.4001.4001.8002.2002.2002.5003.0003.0003.0003.000

Feed column no.

Tool material/Carbide grade

Form

Surface finish

Guhring std.

stra

igh

t

Gu

hr.

no.

Carbide/K10

NC machine chucking reamers

Concentrate on your core business tasks. Leave the intelligent tool storage and administration to Guhring. With TM Tool Dispensing Systems the customer benefits from controlled tool availability around the clock, reduction of storage as well as administration costs and transparency of tool consumption, cost allocation as well as stock levels.

TM Tool Dispensing Systems

The new dimension for economic machining

Superline

Drilling

Special tooling SolutionS

Milling

Modular tooling systeMs

tool restoration service

Reaming pcd/pcbTapping/Thread milling/fluTeless Tapping

Countersinking/de-burning

8th EditionSuperline

Guhring Ltd.Castle Bromwich Business Park, Tameside Drive,Birmingham B35 7AG

Telephone: 0121 749 5544Fax: 0121 776 7224 www.guhring.co.uk

No liability can be accepted for printing errors or technical changes of any kind.Our Conditions of Sale and Terms of Payment apply. Available on request.

1118

-VII-

05 •

Pri

nte

d in

Ger

man

y •

2011

sl 8 edition catalogue

Documents