series4100 dat-sw en

8/10/2019 Series4100 Dat-sw En

1/20

SecureCommunications

R&SM3SR Series4100Software Defined RadiosSpecifications


2/20

Version 04.00, July 2011

2 Rohde & SchwarzR&SM3SR Series4100 Software Defined Radios

CONTENTSSpecifications.................................................... ....................................................... ....................................................... 3

General data ...........................................................................................................................................................................................3

Transmitter data......................................................................................................................................................................................4

Receiver data..........................................................................................................................................................................................5

Radio data with options...........................................................................................................................................................................7

R&SFK4120/4140 digitally tuned 20 dB/40 dB RF selection (option)................................................................................................7

R&SVK4150/VK4190 500 W/1000 W power amplifier with receiver input protection (option) ..........................................................8

R&SGS4114S LINK software (option for operation with tactical data links)......................................................................................8

R&SGS4117S CE conformity mark (option) ......................................................................................................................................8

R&SGS4156S split site (option).........................................................................................................................................................9

Audio and mechanical data...................................................................................................................................................................10

Power supplies......................................................................................................................................................................................12

Ordering information ........................................................... ....................................................................... .................. 14

R&SEK4100A/D receiver ....................................................................................................................................................................14

R&SXK4115A/D transceiver................................................................................................................................................................15

500 W and 1000 W transceiver systems ..............................................................................................................................................16

Auxiliary equipment...............................................................................................................................................................................17


3/20


Rohde & SchwarzR&SM3SR Series4100 Software Defined Radios 3

SpecificationsSpecifications apply under the following conditions: 30 minutes warm-up time at ambient temperature, specified environmental conditions

met, calibration cycle adhered to, and all internal automatic adjustments performed.

Data without tolerance limits is not binding.

The radio systems described are hardware- and software-configurable. The system delivered has the configuration as confirmed in the

order.

General dataTX 1.5 MHz to 29.999999 MHzFrequency range

RX 10 kHz to 29.999999 MHz

Resolution 1 Hz

100 s 1 109

Frequency stability (OCXO)

per year 1 107

External reference frequency input 0 dBm 3 dB, 50 1/5/10 MHz

Preset pages 100

user-programmable 400 half-duplex channels

fixed-programmed 1839 ITU channels

Channel memory

additional channels for ALE 100 half-duplex channels

Test (built-in test facility) failure localization down to module level PBIT (power-on BIT)

CBIT (continuous BIT)

IBIT (initiated BIT)Remote control interfaces RS-232-C, Ethernet (IEEE 802.3)

HF parameters in line with STANAG 4203, annexes B + C

installation in operating room (distance = 1 m)

R&SEK4100A 45 dBA

R&SXK4115A/D 55 dBA

Acoustic noise

500 W/1000 W transceiver system 65 dBA

Waveforms

Classes of emission A1A, A3E, H3E, B8E, B7D, F1D, F1B,

F3E, J3E (LSB, USB), J2D (LSB, USB)

EPM (optional) powerful HF slow hopping wave-form with

embedded COMSEC

R&SSECOM-H

ALE 2G (second-generation automatic link

establishment, optional)

in line with FED-STD-1045/1046/1049,

MIL-STD-188-141B, App. A + B

ALE 3G (third-generation automatic link

establishment, optional)

in line with STANAG 4538, FLSU (fast link

setup), CLC (circuit link control)

HF modem (optional) in line with STANAG 4285,

STANAG 4539 (incl. STANAG 4415),

MIL-STD-188-110B, section 5.3 + App. C,

STANAG 4529, STANAG 4481,

STANAG 5065, MIL-STD-188-110B

App. F

Data link protocols (ARQ, optional) in line with STANAG 4538, LDL (low

latency data link protocol), HDL (high rate

data link protocol)

Data link capability (optional) in line with STANAG 5511,

MIL-STD-188-203-1A,

STANAG 5522 (fixed frequency)

MTBF

Conditions in line with MIL-HDBK-217F, +21 C, GB = ground benign, NS = naval shelteredR&SEK4100A/D basic receiver without options GB 52000 h, NS 10500 h

R&SXK4115A/D basic transceiver without options GB 50000 h, NS 9100 h

R&SGX4100A/D basic exciter without options GB 63000 h, NS 11000 h

R&SVK4150 500 W power amplifier 6119.9002.03/.13 GB 82000 h, NS 20500 h

R&SVK4190 1000 W power amplifier 6120.1501.03/.13 GB 74000 h, NS 18000 h

R&SIN4150 500 W power supply 6120.0705.02 GB 122000 h, NS 44000 h





R&SBV4190 transformer 6120.7700.08 GB 397000 h, NS 211000 h

R&SIN4000A power supply 6105.5800.02 GB 100000 h, NS 40000 h

R&SGB4000C local control panel 6105.6006.03/.06 GB 696000 h, NS 126000 h


4/20



R&SFK4120 digitally tuned RF

selection

6119.5007.02 GB 162000 h, NS 26000 h

R&SFK4140 digitally tuned RF

selection

6119.6003.02 GB 125000 h, NS 19600 h

R&SGS4102 NMEA (DSC) interface 6119.3504.02 GB 248000 h, NS 44000 h

MTTR all units and models < 30 min

Transmitter data

All transmitter data refers to a load impedance of 50 ; without the R&SFK4120/FK4140 digitally tuned RF selection.

RF output power

constant envelope modes 100 W (CW) + 1.0/ 0.5 dB150 W transceiver

non-constant envelope modes 150 W(PEP) + 1.0/ 0.5 dB

500 W transceiver system1 all modes 500 W 0.5 dB

1000 W transceiver system1 all modes 1000 W 0.5 dB

RF emergency output power

(500 W and 1000 W systems)

battery operation 100 W(CW) 1 dB

Duty cycle continuous transmission

Power step tolerance

150 W (PEP), 100 W (PEP/CW) +1.0/0.5 dB

50 W (PEP/CW) 1 dB

20 W (PEP/CW) 1 dB

10 W (PEP/CW) 1.5 dB

150 W transceiver

10 mW (PEP/CW) +3.7/2.7 dB

500 W 0.5 dB

250 W 1 dB

100 W 1 dB

50 W 1.5 dB

20 W 2 dB

500 W transceiver system1

OFF/10 mW no RF output on power amplifier

1000 W 0.5 dB

500 W 0.5 dB

250 W 1 dB

100 W 1 dB

50 W 1.5 dB

1000 W transceiver system1

OFF/10 mW no RF output on power amplifier

VSWR power reduction

VSWR 1.5 100 W(PEP/CW)/150 W (PEP) 1.0 dBVSWR 2.4 100 W(PEP/CW) 1.0 dB

150 W transceiver

VSWR > 10 W (PEP/CW)

VSWR 1.5 500 W (PEP/CW) 1.0 dB


500 W transceiver system


VSWR 1.5 1000 W (PEP/CW) 1.0 dB




Settling time after power level changes

150 W transceiver < 50 ms

500 W transceiver system < 1 s

1000 W transceiver system < 1 s

fixed frequency

RX TX 10 ms

RX/TX switching time

TX RX 15 ms

Third-order intermodulation (TOI)

150 W transceiver 32 dB below PEP

500 W transceiver system 36 dB below PEP

1000 W transceiver system 36 dB below PEP

measured at maximum nominal output power in A1A

f0 1 kHz 110 dBc (1 Hz)

f0 30 kHz 135 dBc (1 Hz)

f0 5 % 145 dBc (1 Hz)

Carrier noise level

f0 10 % 150 dBc (1 Hz)

1 See section on R&S

GS4117S for limitations.


5/20



TX harmonics

150 W transceiver at 100 W(CW) 45 dBc

500 W transceiver system at 500 W(CW) 48 dBc

1000 W transceiver system at 1000 W(CW) 48 dBc

Carrier rejection J3E 60 dB below PEP

Sideband rejection J3E 60 dB below PEP

25 % of max. output power,

in line with MIL-STD-188-141B

fc= center frequency of bandwidth (Hz)

B = TX modulation bandwidth (Hz)fc 4 B to fc + 4 B 40 dBc

0.95 fcto fc 4 B 60 dBc

fc + 4 B to 1.05 fc 60 dBc

< 0.95 fc 80 dBc

Spurious emissions

> 1.05 fc 80 dBc

voice (J3E) passband 300 Hz to 3400 HzTX modulation bandwidth2

data (J2D/B7D) passband 300 Hz to 3050 Hz

Signal-to-noise ratio J3E, H3E, in line with ITU-T (O.41/P53) 50 dB below PEP, weighted

Automatic level control (ALC)

J2D and B7D adjustable in steps of 1 dBPeak power to average power ratio

(PEP/PAVG) all other modes adjusted automatically

Selective level control (option) available for 500 W and 1000 W power

amplifiers

fully digital narrowband measurement of

the forward and reflected power at the

operational frequency, recommended for

severe co-site conditions

Voice compressor J3E, A3E, H3E, F3E compression ratio for voice signals:

> typ. 6 dB

Receiver dataAll receiver data without the R&S

FK4120/FK4140 digitally tuned RF selection and receiver input protection.

RX test signal generator source impedance: 50 . The receiver data is valid for the standalone receivers as well as for the receiving

part of the receiver/exciter and of the 150 W transceiver.

Input impedance VSWR 3 50

operation, specs complied with +7 dBm (1 V (VEMF))Antenna input level (max.)

without damage +53 dBm (200 V (VEMF))

Sensitivity (without preamplifier)

10 kHz to 15 kHz J3E (SSB), B = 1200 Hz

psophometric weighting filter (ITU-T),

SINAD = 10 dB

typ. 98 V (VEMF) (73 dBm)



SINAD = 10 dB

98 V (VEMF) (73 dBm)



SINAD = 10 dB

9.8 V (VEMF) (93 dBm)

A1A (CW), B = 300 Hz

S/N = 10 dB

0.45 V (VEMF) (120 dBm)

J3E (SSB), B = 2.7 kHz


SINAD = 10 dB

0.8 V (VEMF) (115 dBm)

100 kHz to 29.999999 MHz

A3E (AM), B = 6.0 kHz, m = 70 %

psophometric weighting filter (ITU-T),SINAD = 10 dB

1.6 V (VEMF)(109 dBm)

Sensitivity (with preamplifier)

A1A (CW), B = 300 Hz

S/N = 10 dB

0.2 V (VEMF)(127 dBm)

J3E (SSB), B = 2.7 kHz


SINAD = 10 dB

0.32 V (VEMF) (123 dBm)

100 kHz to 29.999999 MHz

A3E (AM), B = 6.0 kHz, m = 70 %


SINAD = 10 dB

0.7 V (VEMF) (116 dBm)

Noise figure (with/without preamplifier) 9 dB/18 dB

2 See section on R&S

GS4117S for limitations.


6/20



Oscillator reradiation at antenna input 10 V (VEMF) at 50

Second-order intercept point (IP2) without preamplifier, interfering signals of

2 0 dBm

+60 dBm

Third-order intercept point (IP3) without preamplifier, interfering signals of

2 0 dBm, f = 30 kHz

+35 dBm

Inband intermodulation in line with MIL-STD-188-203-1A,

frequency of audio tones within

450 Hz to 3050 Hz,

interfering signals of 2 53 dBm

IM3 40 dB (IP3 33 dBm)

Image rejection 80 dBIF rejection 90 dB

Sideband rejection (SSB) 60 dB below PEP

Crossmodulation (without preamplifier) useful signal level 1 mV (VEMF),

interfering signal level 4 V (VEMF),

interferer frequency f 30 kHz,

interferer modulation A3E,

modulation frequency 1 kHz,

modulation depth 30 %

10 % modulation transfer

Blocking (without preamplifier) useful signal level 2 mV (VEMF),

interfering signal level 5 V (VEMF),

interferer frequency f 30 kHz

3 dB reduction of audio level

Desensitization (without preamplifier) psophometric weighting filter,

useful signal level 30 V (VEMF),

RX bandwidth 2700 Hz,

interfering signal level 100 mV (VEMF),

interferer frequency f = 30 kHz

SINAD 20 dB

in line with MIL-STD-188-141B

for 99 % of 3 kHz channels 112 dBm

for 0.8 % of 3 kHz channels 106 dBm

for 0.2 % of 3 kHz channels > 106 dBm

Internally generated spurious emissions

no internally generated spurious outputs above 90 dBm

AGC range J3E, without preamplifier 3 dB output variation

for 1 V to 1 V (VEMF)

BFO (beat frequency oscillator) 2 kHz in 10 Hz steps

Passband tuning 2 kHz in 10 Hz steps

Squelch syllabic, RSSI, tone, RSSI + syllabic,

RSSI + tone

Automatic multinotch filter notch frequency 0 Hz to 3.4 kHz attenuation of unwanted signals typ. 20 dB

Noise blanker types: FLASH, SPARK, ELECTRICFENCE, available for A3E/ H3E/ F3E/ J3E

background noise is attenuated bytyp. > 10 dB for a predefined noise pattern

Mute 90 dB

Receive bandwidths (3 dB)

F3E 6.0 kHz, 8.0 kHz

A3E 3.5 kHz to 8.0 kHz, 500 Hz steps

H3E 2.1/2.4/2.7/3.1 kHz

B8E 1.8 kHz to 3.1 kHz, 100 Hz steps

B7D 1.8 kHz to 3.1 kHz, 100 Hz steps

J3E 50 Hz to 250 Hz, 50 Hz steps

300 Hz to 3.1 kHz, 100 Hz steps

J2D 100 Hz to 3.1 kHz, 100 Hz steps

A1A 50 Hz to 250 Hz, 50 Hz steps

300 Hz to 3.1 kHz, 100 Hz steps

baud rates 50 Bd, 75 Bd, 100 Bd, 150 Bd, 300 Bd,

600 Bd

F1D/F1B

shifts 42 Hz, 85 Hz, 170 Hz, 425 Hz


7/20



Radio data with options

R&S

FK4120/4140 digitally tuned 20 dB/40 dB RF selection (option)

Digitally tuned RF selection R&S

FK4120 R&S

FK4140

TX: 1.5 MHz to 29.999999 MHz TX: 1.5 MHz to 29.999999 MHzFrequency range

RX: 10 kHz to 29.999999 MHz

(lowpass filter for reception < 1.5 MHz)

RX: 10 kHz to 29.999999 MHz

(lowpass filter for reception < 1.5 MHz)

Stopband attenuation

At 10 % offset from operating

frequency

20 dB 40 dB

Input voltage protection

f 29.999999 MHz, Ri= 50 ,

without damage

VAnt200 V (VEMF) VAnt200 V (VEMF)

Transmitter

f0 1 kHz: 110 dBc (1 Hz) f0 1 kHz: 110 dBc (1 Hz)

f0 30 kHz: 135 dBc (1 Hz) f0 30 kHz: 135 dBc (1 Hz)

Carrier noise level

measured at maximum nominal output

power in A1A; transmitter terminated

into 50

f0 10 %

< 155 dBc (1 Hz), f < 10 MHz

< 165 dBc (1 Hz), f > 10 MHz

f0 5 %

< 155 dBc (1 Hz), f < 10 MHz

< 165 dBc (1 Hz), f > 10 MHz

Receiver

without preamplifier:

A1A < 0.8 V (VEMF) (115.0 dBm)

J3E < 1.32 V (VEMF) (110.6 dBm)

without preamplifier:

A1A < 1.0 V (VEMF)(113.0 dBm)

J3E < 1.8 V (VEMF) (107.9 dBm)

Sensitivity

100 kHz to 29.999999 MHz,

SINAD = 10 dB,psophometric weighting filter (ITU-T),

A1A: B = 300 Hz, J3E: B = 2.7 kHz

with preamplifier:

A1A < 0.48 V (VEMF) (119.4 dBm)

J3E < 0.91 V (VEMF) (113.8 dBm)

with preamplifier:

A1A < 0.68 V (VEMF) (116.4 dBm)J3E < 1.22 V (VEMF) (111.3 dBm)

Second order intercept point (IP2)

With or without preamplifier,

measurement level 2 +10 dBm,

interfering signals: 5 % and 10 %

offset from operating frequency

+80 dBm +100 dBm

Third order intercept point (IP3)

Without preamplifier, measurement

level 2 +10 dBm, interfering signals:

5 % and 10 % offset from operating

frequency

+50 dBm +50 dBm

With preamplifier, measurement level

2 +10 dBm, interfering signals:5 % and 10 % offset from operating

frequency

+32 dBm +45 dBm

Without preamplifier, measurement

level 2 5 dBm, interfering signals:

f 30 kHz

+27 dBm +27 dBm

Image rejection 130 dB 130 dB

IF rejection 110 dB 130 dB

Blocking

Without preamplifier,

useful signal level: 2 mV (VEMF),

interfering signal level: 10 V (VEMF),

f 5 % (f ref. to wanted signal)

3 dB reduction of audio level 3 dB reduction of audio level

Desensitization

Without preamplifier, useful signal

level 30 V (VEMF),

RX bandwidth: 2700 Hz,

interfering signal level: 315 mV or

1 V (VEMF),

f 5 % (f ref. to wanted signal)

(measurement without psophometric

weighting filter)

SINAD 20 dB

(interfering signal level: 315 mV)

SINAD 20 dB

(interfering signal level: 1 V)

Max. input level (operation) typ. 6.3 V (VEMF) typ. 6.3 V (VEMF)


8/20



R&S

VK4150/VK4190 500 W/1000 W power amplifier with receiver input protection (option)

f 29.999999 MHz, Ri= 0 VAnt100 V (VRMS)Input voltage protection (operation)

f > 29.999999 MHz, Ri= 0 VAnt10 V (VRMS)

without preamplifier, without digitally tuned RF selection

A1A < 110 dBm

J3E < 105 dBm

H3E < 96 dBm

A3E < 99 dBm

with preamplifier, without digitally tuned RF selectionA1A < 117 dBm

J3E < 113 dBm

H3E < 105 dBm

Sensitivity

100 kHz to 29.999999 MHz,

SINAD = 10 dB, psophometric

weighting filter (ITU-T)

A3E < 106 dBm

R&S

GS4114S LINK software (option for operation with tactical data links)

connection of DTS for LINK-11, LINK-Y, LINK-22

LINK-MULTI

LINK-SINGLE

J2D

LINK-Y MULTI

LINK-MULTI

LINK-SINGLE

Operating modes (D model only)

B7D

LINK-Y MULTI

in line with MIL-STD-188-203-1A, operating mode J2D/B7D, 1.5 MHz to 29.999999 MHzTX modulation bandwidthpassband 300 Hz to 3050 Hz 2.75 kHz

in line with MIL-STD-188-203-1A, operating mode J2D/B7D, 1.5 MHz to 29.999999 MHz

500 Hz to 3050 Hz < 3.5 ms

TX group delay

815 Hz to 3050 Hz 0.5 ms

in line with MIL-STD-188-203-1A

RX TX 7 ms

RX/TX switching time

TX RX 23 ms

AGC attack time 93 dBm to +7 dBm 13 ms

in line with MIL-STD-188-203-1A, frequency of audio tones within 450 Hz to 3050 Hz,

measurement level 2 53 dBm

IM3 40 dB

Inband intermodulation

IP3 33 dBm

frequency response J2D/B7D (in line with MIL-STD-188-203-1A)

450 Hz to 3050 Hz 1 dB

AF line input

300 Hz to 3050 Hz 1.5 dB

frequency response J2D/B7D (in line with MIL-STD-188-203-1A)

450 Hz to 3050 Hz 1 dB

AF line output

300 Hz to 3050 Hz 1.5 dB

R&S

GS4117S CE conformity mark (option)

CE conformity mark

R&SXK4115A/D basic transceiver

R&SGX4100A/D basic exciter

EN 300373-1 section 10.7 specifies

additional restrictions for the transmitters.

R&SVK4150 500 W power amplifier

R&SVK4190 1000 W power amplifier

R&SIN4150 500 W power supply

(model .02)

R&SIN4190 1000 W power supply

(model .02)

For operation in line with EN61000-3-2,

see operating modes described in the

operating manual.

R&SEK4100A/D basic receiver

R&SIN4000A 150 W power supply

R&SGB4000C remote control unit

These instruments already have the CE

conformity mark and therefore do not

require the R&SGS4117S option.

in line with EN 300373-1/-2/-3

with section 7.6 as restriction

limitation for CE operation:

power reduction to < 400 W for

f < 4 MHz

reduction of TX bandwidth


9/20


10/20



Audio and mechanical dataAudio data

AF microphone input (transceiver and exciter models only)

Level range unbalanced, 600 , for dyn. microphones 0.3 mV to 10 mV (VRMS)

Frequency response from line input to

antenna output

3.1 kHz bandwidth selected,

J3E modulation, 300 Hz to 3300 Hz

2.5 dB

1 kHz AF tone, F3E mode 5 % at 10 mV (VRMS)Harmonic distortion

1 kHz AF tone, J3E mode 1 % at 10 mV (VRMS)

AF line input (transceiver and exciter models only)Level range 2 line input, balanced, 600 adjustable from approx. 8 dBm to

+6 dBm, 0 dBm (nom.)

Frequency response from line input to

antenna output

3.1 kHz bandwidth selected,

J2D/J3E modulation, 300 Hz to 3300 Hz

1.5 dB

1 kHz AF tone, F3E mode 5 % at 0 dBmHarmonic distortion

1 kHz AF tone, J3E and J2D mode 1 % at 0 dBm

AF headset output

Output power into 300 load 4 V (VRMS)

Frequency response from antenna

input to headset output

3100 Hz bandwidth selected,

J3E modulation, 300 Hz to 3300 Hz

2.5 dB

Harmonic distortion 1 kHz AF tone into 300 load 5 % at 3 V (VRMS)

AF line output

Level range 2 line output, balanced, 600 settable within approx. 10 dBm to

+10 dBm in 0.1 dB steps, 0 dBm (nom.)

Frequency response from antenna

input to line output

3100 Hz bandwidth selected,

J2D/J3E modulation, 300 Hz to 3300 Hz

1.5 dB

1 kHz AF tone, F3E mode 5 % at 0 dBmHarmonic distortion

1 kHz AF tone, J3E and J2D mode 1 % at 0 dBm

nominal input power 1 WInternal loudspeaker

nominal input power (model .02 only) 0.3 W

output power into 4 > 1.5 WExternal loudspeaker output (rear panel)

harmonic distortion, 1 kHz AF tone 5 % at 1 W

Built-in interfaces

Front panel

Fill interface connector for R&SGP3000

fillgun proprietary

connector 1 NF-7Headset connector

connector 2 TRS 6.3 mm

Rear panel

External reference frequency BNC femaleRCB serial interface (optical) control of external system components SC system

Data interface RS-232-C, asynchronous,

synchronous operation prepared

15-pin female, D-Sub

RS-232-C 9-pin male, D-SubRemote control and software download

in line with IEEE 802.3 RJ-45 connector, 10BaseT

Audio/PTT 44-pin female, D-Sub

R&SXK4115A/D N femaleTX/RX (antenna)

R&SGX4100A/D BNC female

RX (antenna) BNC female

GPS (antenna) TNC female

Environmental data

Temperature ranges in line with MIL-STD-810F, method 501.4/502.4, EN 60068-2-1/2

Operating temperature range proc. II 20 C to +55 C

Storage temperature range proc. I 40 C to +70 C

Humidity in line with MIL-STD-810F, method 507.4 95 % relative humidity and variation of

temperature between +30 C to +55 C

Fungus in line with MIL-STD-810F, method 508.5 (in line with MIL-HDBK-454)

in line with MIL-STD-810F, method 500.4

proc. I, storage/air transport 10000 m above sea level

proc. II, operation

20 C to +55 C 1000 m above sea level

Permissible altitude

20 C to +35 C 3000 m above sea level

Vibration (sinusoidal) in line with MIL-STD-167-1, type 1 1.5 mm to 0.15 mm double amplitude and

4 Hz to 50 Hz, test period: 40 min/axis

Vibration (random) in line with MIL-STD-810F, method 514.5 shipboard random vibration exposure:

4 Hz to 100 Hz at 0.03 g/Hz, test period:

20 min/axis


11/20



Shock resistance in line with MIL-STD-810F, method 516.5,

proc. I, EN 60068-2-27

crossover frequency 45 Hz, 40 g, 15 ms to

23 ms, 3 shocks per main axis (pos./neg.)

EMI/EMC in line with MIL-STD-461E: CE102,

CS101, CS114, RE101, RE102, RS101,

RS103

Electrical power system requirements for R&SIN41x0 model .03 and

R&SBV4190 only

STANAG 1008, edition 8

MIL-STD-1399, section 300A

Electrical safety EN 60950-1, EN 60215-1

International protection code front panel/rest of device

R&SEK4100A/D basic receiver IP32/IP20 in line with IEC 60529R&S

XK4115A/D basic transceiver IP32/IP20 in line with IEC 60529

R&SGX4100A/D basic exciter IP32/IP20 in line with IEC 60529

R&SVK4150 500 W power amplifier IP20 in line with IEC 60529

R&SVK4190 1000 W power amplifier IP20 in line with IEC 60529

R&SIN4150 500 W power supply IP20 in line with IEC 60529

R&SIN4190 1000 W power supply IP20 in line with IEC 60529

R&SBV4190 transformer IP20 in line with IEC 60529

R&SIN4000A 150 W power supply IP32/IP20 in line with IEC 60529

Mechanical data

Dimensions W D H (Depth = distance between front panel and rear panel)

1 HU = 44 mm = 1.73 in

R&SEK4100A/D basic receiver 481 mm 481 mm 132 mm (3 HU),

19 in 19 in 5.19 in (3 HU)

R&S

XK4115A/D basic transceiver 481 mm 481 mm 132 mm (3 HU),19 in 19 in 5.19 in (3 HU)

R&SGX4100A/D basic exciter 481 mm 481 mm 132 mm (3 HU),

19 in 19 in 5.19 in (3 HU)

R&SVK4150 500 W power amplifier 481 mm 570 mm 264 mm (6 HU),

19 in 22.44 in 10.38 in (6 HU)

R&SVK4190 1000 W power amplifier 481 mm 570 mm 264 mm (6 HU),

19 in 22.44 in 10.38 in (6 HU)

Additional space (depth) for future power amplifier upgrade max. 200 mm (7.87 in)

R&SIN4150 500 W power supply 481 mm 570 mm 132 mm (3 HU),

19 in 22.44 in 5.19 in (3 HU)

R&SIN4190 1000 W power supply 481 mm 570 mm 132 mm (3 HU),

19 in 22.44 in 5.19 in (3 HU)

R&SBV4190 transformer 481 mm 570 mm 132 mm (3 HU),

19 in 22.44 in 5.19 in (3 HU)

R&S

IN4000A 150 W power supply 481 mm 420 mm 44 mm (1 HU),19 in 16.54 in 1.73 in (1 HU)

Additional space for rear cabling 200 mm (7.87 in) recommended

Weight

R&SEK4100A/D basic receiver without hardware options max. 14 kg (30.86 lb)

R&SXK4115A/D basic transceiver without hardware options max. 16.5 kg (36.38 lb)

R&SGX4100A/D basic exciter without hardware options max. 13 kg (28.65 lb)

R&SVK4150 500 W power amplifier without hardware options max. 30 kg (66.13 lb)

R&SVK4190 1000 W power amplifier without hardware options max. 38 kg (83.76 lb)

R&SIN4150 500 W power supply max. 24 kg (52.91 lb)

R&SIN4190 1000 W power supply max. 24 kg (52.91 lb)

R&SBV4190 transformer max. 53 kg (116.85 lb)

R&SIN4000A 150 W power supply max. 7.1 kg (15.65 lb)

Color of front panel RAL 7047


12/20



Power suppliesR&S

EK4100A/D receiver

specs complied with +28 V 1 VDC supply

permissible +19 V to +31 V

AC supply embedded 90 V to 264 V, 50/60 Hz

Input power consumption without options max. 80 VA

burst in line with EN 61000-4-4Power protection

surge in line with EN 61000-4-5

R&SXK4115A/D transceiverspecs complied with +28 V 1 VDC supply

permissible +19 V to +31 V

AC supply with R&SIN4000A 90 V to 264 V, 47 to 63 Hz

3

Input power consumption without options, for operation with

R&SIN4000A

max. 580 W, max. 675 VA


AC supply 230 V (1 phase + N)

208 V (, 3 phases) line-to-line

230 V (Y, 3 phases + N)

input voltage tolerance +10 %, 15 %, 47 Hz to 63 Hz

input power consumption

1 phase max. 2.5 kVA

3 phases (Y) max. 3.6 kVA

3 phases () max. 3.0 kVA

power factor correction (PFC)

1 phase > 0.99

3 phases (Y) > 0.65

R&SIN4150 power supply (model .02)

3 phases () > 0.90

AC supply, galvanically isolated phases 3 225 V from R&SBV4190

input voltage tolerance 20 %, 47 Hz to 63 Hz

input power consumption max. 2.5 kVA


to be used only in combination with an

R&SBV4190 transformer

power factor correction (PFC) 0.99

DC supply 220 V

input voltage tolerance 10 %







power factor correction (PFC) 0.99Emergency operation of all power supply

models

DC supply for battery operation 24 V to 27.6 V

AC supply, , 3 phases 440 V




3 For reduced voltage (< 100 V), ambient temperature may not exceed +50 C and output power may not exceed 700 W.


13/20





208 V (, 3 phases) line-to-line

230 V (Y, 3 phases + N)


input power consumption

1 phase max. 4.5 kVA

3 phases (Y) max. 6.5 kVA3 phases () max. 5.0 kVApower factor correction (PFC)

1 phase > 0.99

3 phases (Y) > 0.65


3 phases () > 0.90

AC supply, galvanically isolated phases 3 225 V from R&SBV4190




to be used only in combination with an


power factor correction (PFC) 0.99

Emergency operation of all power supply

models

DC supply for battery operation 24 V to 27.6 V

AC supply, , 3 phases 440 V line-to-line





14/20



Ordering information

R&SEK4100A/D receiverDesignation Type Order No.

Base units

VLF-HF Receiver, AC/DC, without local control panel and radio software, ruggedized model R&SMR4100E 6118.9609.22

Radio software

Software CD without export restriction R&S

DS4100A 6119.7800.xxSoftware CD with export restriction R&S

DS4100D 6119.7900.xx

Hardware options

Local Control Panel (without audio, incl. software and LAN), ruggedized model R&SGB4000C 6105.6006.35

Digitally Tuned RF Selection, 20 dB, functional for transmitting and receiving section R&SFK4120 6119.5007.02


NMEA (DSC) Interface, for connecting an external DSC controller (GMDSS) R&SGS4102 6119.3504.02

Software options (option keys)

ALE-2G (FED-STD-1045/1046/1049) R&SGS4101S 6120.6003.02

ALE-2G (FED-STD-1045/1046/1049), STANAG 4538/ALE-3G (FLSU, LP, xDL, ALM) R&SGS4155S 6142.7560.02

LINK Software, tactical data link capability in line with STANAG 5511, STANAG 5522 (fixed

frequency), LINK-Y

R&SGS4114S 6142.7619.02

HF Modem, single tone modems in line with STANAG 4285, STANAG 4539,

MIL-STD-188-110B section 5.3 + App. C, STANAG 4529, STANAG 4481, STANAG 5065,

MIL-STD-188-110B App. F

R&SGM4120S 6142.7519.02

Secure Digital Voice (supported in STANAG 4538 and FF), Secure Digital Data (supported in

STANAG 4538), Last Ditch Voice (supported in STANAG 4538)

R&SGM4121S 6142.7719.02

Split Site R&SGS4156S 6142.7760.02

Mating connector set

Mating Connector Set for R&SMR4100E R&S

ZF4101 6120.5007.05


15/20



R&SXK4115A/D transceiverDesignation Type Order No.

Base units

HF Transceiver, 150 W, DC, without local control panel and radio software, ruggedized model R&SMR4100X 6119.7251.22

Radio software

Software CD without export restriction R&SDS4100A 6119.7800.xx

Software CD with export restriction R&SDS4100D 6119.7900.xx

Hardware options

Local Control Panel (without audio, incl. software and LAN), ruggedized model R&SGB4000C 6105.6006.35Digitally Tuned RF Selection, 20 dB, functional for transmitting and receiving section R&S

FK4120 6119.5007.02




EPM (ECCM) Software: R&SSECOM-H R&S

GS3001S 6095.4859.02




frequency), LINK-Y

R&SGS4114S 6142.7619.02

CE Conformity Mark R&SGS4117S 6120.3140.02




R&SGM4120S 6142.7519.02



R&SGM4121S 6142.7719.02


Power supply units

External Power Supply, AC/DC, ruggedized model R&SIN4000A 6105.5800.02

Mating connector sets

Mating Connector Set for R&SIN4000A R&S

ZF4001 6105.7002.02

Mating Connector Set for R&SMR4100X R&S

ZF4101 6120.5007.02

Power supply cables

Power Supply Cable, R&SXK4115 R&S

IN4000A, 0.5 m length R&S

GK4103 6120.5807.05


IN4000A, 1 m length R&S

GK4103 6120.5807.10


IN4000A, 2.5 m length R&S

GK4103 6120.5807.25


16/20



500 W and 1000 W transceiver systemsDesignation Type Order No.

Base units

HF Receiver/Exciter, DC, without local control panel and radio software, ruggedized model R&SMR4100G 6118.9750.22

Radio software

Software CD without export restriction R&SDS4100A 6119.7800.xx

Software CD with export restriction R&SDS4100D 6119.7900.xx

Hardware options

Local Control Panel (without audio, incl. software and LAN), ruggedized model R&SGB4000C 6105.6006.35Digitally Tuned RF Selection, 20 dB, functional for transmitting and receiving section R&S

FK4120 6119.5007.02




EPM (ECCM) Software: R&SSECOM-H R&S

GS3001S 6095.4859.02




frequency), LINK-Y

R&SGS4114S 6142.7619.02

Selective Level Control (PA) R&SGS4115S 6120.6703.02

CE Conformity Mark R&SGS4117S 6120.3140.02




R&SGM4120S 6142.7519.02



R&SGM4121S 6142.7719.02


Power amplifiers

500 W HF Power Amplifier R&SVK4150 6119.9002.03

500 W HF Power Amplifier, with receiver input protection R&SVK4150 6119.9002.13

1000 W HF Power Amplifier R&SVK4190 6120.1501.03

1000 W HF Power Amplifier, with receiver input protection R&SVK4190 6120.1501.13

Power supply units for 500 W transceiver system

Power Supply 230 V AC, 1 or 3 phases + N/208 V AC, 3-phase R&SIN4150 6120.0705.02

Power Supply 440 V AC, 3 phases (used together with an R&SBV4190 transformer) R&S

IN4150 6120.0705.03

Power Supply 220 V DC R&SIN4150 6120.0705.12

Transformer 440 V AC, 3-phase R&SBV4190 6120.2908.02

Power Supply 115 V AC, 1 phase + N R&SIN4190 6120.2708.02

Power supply units for 1000 W transceiver systemPower Supply 230 V AC, 1 or 3 phases + N/208 V AC, 3-phase R&S

IN4190 6120.2708.02

Power Supply 440 V AC, 3 phases (used together with an R&SBV4190 transformer) R&S

IN4190 6120.2708.03

Transformer 440 V AC, 3-phase R&SBV4190 6120.2908.02

Mating connector sets

Mating Connector Set for R&SMR4100G R&S

ZF4101 6120.5007.04

Mating Connector Set for R&SVK4150/VK4190 R&S

ZF4103 6120.5207.02

Mating Connector Set for R&SIN4150/IN4190 R&S

ZF4107 6120.2808.02

Mating Connector Set for R&SBV4190 R&S

ZF4108 6120.7700.02

Connecting cables

Fiber-Optic Connecting Cable, R&SVKx R&S

GXx, 1 m length R&S

GK4101 6120.5620.10


GXx, 3.5 m length R&S

GK4101 6120.5620.35


GXx, 50 m length R&S

GK4101 6120.5620.50

DC Cable, R&SGXx R&S

VKx, 2.5 m length R&S

GK4104 6120.5907.25

RF Cable, R&SGXx R&S

VKx, 3 m length R&S

GK4105 6120.3604.03

Control Cable, R&SVKx R&SINx, 3 m length R&SGK4106 6120.3656.03

DC Cable, R&SVKx R&S

INx, 3 m length R&S

GK4107 6120.3704.03

Power Cable, R&SBVx R&S

INx, 3 m length R&S

GK4108 6120.3756.03


17/20



Auxiliary equipmentDesignation Type Order No.

Remote control units

Remote Control Unit, ruggedized model R&SGB4000C 6105.6006.36

Mating Connector Set for R&SGB4000C R&S

ZF4410 6105.9011.04

Audio units

Headset incl. microphone (ruggedized version) with cable and NF-7 connector R&SGA012 0693.7664.02

Handset incl. microphone (ruggedized version) with cable and NF-7 connector R&SGA013 0693.7712.02

Headset, dynamic with cable and NF-7 connector R&SGA015 0583.6012.02Microphone with PTT, handheld R&S

GA2100 6064.5001.02

Handset with PTT, standard R&SGA2120 6064.6008.03

Other equipment

Morse Key with cable and connector R&SGA2180 6075.3763.02

Fillgun R&SGP3000 6099.3805.02

USB Cable, fillgun PC R&SGK3021 6118.1750.02


18/20




19/20




20/20

R&S is a registered trademark of Rohde & Schwarz GmbH & Co. KG

Trade names are trademarks of the owners | Printed in Germany (ch)

PD 5213.9557.22 | Version 04.00 | July 2011 | R&SM3SR Series4100

Subject to change

2008 - 2011 Rohde & Schwarz GmbH & Co. KG | 81671 Mnchen, Germany

About Rohde & Schwarz

Rohde & Schwarz is an independent group of companies

specializing in electronics. It is a leading supplier of solu-

tions in the fields of test and measurement, broadcasting,

radiomonitoring and radiolocation, as well as secure

communications. Established more than 75 years ago,

Rohde & Schwarz has a global presence and a dedicated

service network in over 70 countries. Company headquar-

ters are in Munich, Germany.

Environmental commitment

Energy-efcient products

Continuous improvement in environmental sustainability

ISO 14001-certied environmental management system

Rohde & Schwarz GmbH & Co. KG

www.rohde-schwarz.com

Regional contact

Europe, Africa, Middle East

+49 89 4129 123 45

[email protected]

North America

1 888 TEST RSA (1 888 837 87 72)

[email protected]

Latin America

+1 410 910 79 88

[email protected]

Asia/Pacic

+65 65 13 04 88

[email protected]

Certifed Quality System

ISO 9001

Service you can rely on

Worldwide

Local and personalized

Customized and flexible

Uncompromising quality

Long-term dependability


AQAP-2110


EN 9100


EN 9110

series4100 dat-sw en

Documents