schedule “c” list of parallel rate contract for item

1/66

Chhattisgarh State Industrial Development Corporation Limited (A Government of Chhattisgarh Undertaking) 1st Floor Udhyog Bhawan Ring Road No. -1, Telibhanadha Raipur 492006 (C.G) EPABX No.-91771-6002071-73, Tele Fax : 91771-2583793 & 91771- 4057624 (MKT) CIN- U45203CT1981SG001853 PAN – AABCM6288N Service Tax Regn. No- AABCM6288NSD004. Website: www. csidc.in, Email : [email protected], [email protected]

SCHEDULE “C” LIST OF PARALLEL RATE CONTRACT FOR ITEM- STEEL CYLINDER PIPE WITH

CONCRETE LINING AND COATING CONFORMING TO IS 1916/1989

S.No. Name of the RC Holding Firm Validity of Rate Contract

Rate Contract No.

1 2 3 4

1 M/s Universal Controls & Systems, 36/5 Sector H, Govindpura Industrial Area, Bhopal (M.P.) Mob.-09926320005 E-Mail: [email protected]

12-04-2016 To

11-04-2017

Rate Contract No. CSIDC/MKD/15-16/125/ 6003/SCP/UC&S/7221 Dated: 12-04-2016

2 M/s M.D. Industries, 59-A, Sector-H Govindpura Industrial Area, Bhopal- 462001 Mob.-09826019065 E-Mail: [email protected]

12-04-2016 To

11-04-2017

Rate Contract No. CSIDC/MKD/15-16/125/ 6003/SCP/MDI/7222 Dated: 12-04-2016

3 M/s Jain Engineeing Works, 367-369, Agrawal Udhyog Nagar, Gram Palda, Nemawar Road, Indore (M.P.) Ph.-0731-4092915, Mob.-9993399993, [email protected]

12-04-2016 To

11-04-2017

Rate Contract No. CSIDC/MKD/15-16/125/ 6003/SCP/JEW/7223 Dated: 12-04-2016

4 M/s Neeti Infraventure Pvt. Ltd.,, Survey No.-59/6-59/11, Eden Rice Mill Compound, Kathadi, Raipur (C.G.) Mob.-9630408586 [email protected]

12-04-2016 To

11-04-2017

Rate Contract No. CSIDC/MKD/15-16/125/ 6003/SCP/NI/7224 Dated: 12-04-2016

5 M/s Universal Projects, P-08, MPAKVN, Industrial Growth Centre, Borgaon, Dist.-Chhindware (M.P.) Ph.-0712-2764197, Mob.-09370226373 Email.- [email protected]

12-04-2016 To

11-04-2017

Rate Contract No. CSIDC/MKD/15-16/125/ 6003/SCP/UP/7225 Dated: 12-04-2016

2/66


No./CSIDC/MKD/PS-III/15-16/ Raipur Dated:

Registered A/D

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/UC&S/7221 Dated: 12-04-2016

To, M/s Universal Controls & Systems,

36/5 Sector H, Govindpura Industrial Area, Bhopal (M.P.) Mob.-09926320005 E-Mail: [email protected]

Sub :- Rate Contract for the supply of Item Steel Cylinder Pipe with Concrete Lining and Coating conforming to IS 1916/1989 (Valid From dated 12-04-16 to 11-04-17)

Ref :- (I) This Office Tender Enquiry No. CSIDC/MKD/15-16/125/6003/ (II) Your Offer acceptance along with undertaking submitted on dated 11-04-2016

Dear Sir,

You are hereby informed that your above referred tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This Rate Contract will be governed by the terms and conditions brought in CSIDC Form No.1 & 2. The Rate Contract and the Schedules annexed hereto shall be the sole repository of this Rate Contract / Transaction.

You are required to show the original INK-SIGNED subject Rate Contract to the satisfaction

of Direct Demanding Officer who will place the supply order as per instructions contained in CSIDC form No. 2 and also to the Quality Assurance Officer for inspection purpose and to the Paying Authority at the time of getting the payment. SCHEDULES ANNEXED: 1. Schedule “A” Description of Stores, Prices, Duties/Taxes. 2. Annexure -“B” Technical Particulars of Item Steel Cylinder Pipe with Concrete Lining and

Coating conforming to IS 1916/1989. 3. Schedule “B” Special conditions of contract (if any). 4. Schedule “C” Information to DDOs about parallel rate contracts. 5. Schedule “D” Format for Drawal Report.

Encl. 12 pages Yours faithfully,

(Subas Chandra Bhagat) Incharge Marketing For and on behalf of the purchaser

named in CSIDC Form No.2

3/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/UC&S/7221 Dated: 12-04-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.

2. The Registrar, Honourable High court Chhattisgarh, Bilaspur.

3. The Accountant General Chhattisgarh State, Raipur.

4. All HODs of Chhattisgarh Govt. with a request to circulate the copy of R/C to all Direct

Demanding Officers of your institution against issue of purchase order (Indent) in Favour of Rate Contract Holders of CSIDC, pre dispatched inspection of stores, also acceptance of store and ensure to endorse the copy of purchase order (Indent) to the CSIDC Ltd.,

5. All The Collectors, Chhattisgarh State against issue of purchase order (Indent) in of Rate Contract Holders of CSIDC,

6. The Director Treasury, Chhattisgarh Govt., Raipur with a request to circulate copy of R/C to all branches under your control.

7. (i) Engineer in Chief Water Resources Department, Raipur C.G. (ii) Engineer in Chief PHED C.G.Indravati Bhawan, Black –B-4, 3rd floor, Naya Raipur

(iii) Engineer in Chief PWD C.G. Civil Lines, Raipur (iv) Commissioner Municipal Corporation, Raipur/Bilaspur/Durg/Bhilai/Rajnandgaon/

Raigarh/ambikapur/Korba/Jagdalpur/Chirmiri (v) Principle Chief Conservator of Forest C.G. Raipur.

Sr. No. 1 to 7 above are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like E.D. Registration, Tax Registration etc. before taking action i.e. release of supply order, inspection of stores, payment of bill whichever is applicable, as the responsibility rests with the concerned authority.

8. (i) CSIDC (DEPARTMENTAL TECHNICAL WING)

(ii) ADG (Q & A), DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 (iii) Manager Indian Register of Shipping, Senior MIG-2, Sector-A, 1st Floor, Infront of

Bank of India Indrapuri Bhopal. (iv) Chief Engineer, PDIL, 4th floor, 4/2 Karaya Road, 67 Shekespeare Sarani, Kolkata

(W.B.) (v) General Manager (Inspection) RITES Ltd., Churchgate Station Road, Second Floor,

M.K. Road, Mumbai-400020 (vi) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal

(MP)-462011. Above (i) to (vi) are requested to call for original INK-SIGNED Rate Contract for verification to their full satisfaction including validity of various documents like Validity of DTIC/NSIC/DGS&D Registration, BIS/BEE License etc. before taking action i.e. inspection of stores, as the responsibility rests with the concerned authority. For information and necessary action against Authorized Inspection Agency accorded by CSIDC for inspection of stores. 9. Manager (Tender), Marketing Div., CSIDC Ltd., Raipur. He is requested to maintain a master

file of Rate Contract. 10. Computer cell, CSIDC Ltd., Raipur to release Rate Contract on CSIDC website. 11 Main file of Item- “Steel Cylinder Pipe with Concrete Lining and Coating conforming to

IS 1916/1989”

(Subas Chandra Bhagat)

Incharge Marketing For and on behalf of the purchaser

Named in CSIDC Form No. 2

4/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/UC&S/7221 Dated: 12-04-2016 SCHEDULE “A”

Description of Stores, Prices, Duties/Taxes For the supply of Item- Steel Cylinder Pipe with Concrete Lining and Coating conforming to IS

1916/1989 as per Annexure’A’ enclosed.

1. (a) NAME AND FULL ADDRESS OF M/s Universal Controls & Systems, THE FIRM :- 36/5 Sector H,

Govindpura Industrial Area, Bhopal (M.P.) Mob.-09926320005

(b) NAME AND FULL ADDRESS OF M/s Universal Controls & Systems,

MANUFACTURER :- 36/5 Sector H, Govindpura Industrial Area, Bhopal (M.P.) Mob.-09926320005

(c) Category :- General 2. VALIDITY OF RATE CONTRACT :- From 12-04-2016 to 11-04-2017

3. DESCRIPTION OF ITEM- Steel Cylinder Pipe with Concrete Lining and Coating conforming to IS 1916/1989 SPECIFICATION, UNIT RATE AS BELOW

Sl. No.

Item Code Item Description F.O.R. Dest. ED & VAT Extra

As Applicable (Rate Per Meter)

1 2 3 4 Schedule-1 - Class 1,Steel Cylinder Pipe with Concrete Lining and Coating conforming to IS 1916/1989 (Steel cylinder Pipe Re-enforcement RCC)

1 CSIDC_RC.28.57.14 300 4065.00 2 CSIDC_RC.28.57.15 400 5603.00 3 CSIDC_RC.28.57.16 450 6096.00 4 CSIDC_RC.28.57.17 500 9122.00 5 CSIDC_RC.28.57.18 600 10943.00 6 CSIDC_RC.28.57.19 700 12764.00 7 CSIDC_RC.28.57.20 800 14585.00 8 CSIDC_RC.28.57.21 900 16406.00 9 CSIDC_RC.28.57.22 1000 20573.00 10 CSIDC_RC.28.57.23 1100 22629.00 11 CSIDC_RC.28.57.24 1200 30000.00 12 CSIDC_RC.28.57.26 1400 35361.00 13 CSIDC_RC.28.57.27 1500 37885.00 14 CSIDC_RC.28.57.28 1600 47912.00 15 CSIDC_RC.28.57.29 1700 50904.00 16 CSIDC_RC.28.57.30 1800 53896.00 17 CSIDC_RC.28.57.32 2000 69259.00 18 CSIDC_RC.28.57.34 2200 76180.00 19 CSIDC_RC.28.57.37 2500 98283.00 20 CSIDC_RC.28.57.39 2700 118799.00 21 CSIDC_RC.28.57.42 3000 131993.00

(Subas Chandra Bhagat) Incharge Marketing

5/66


Schedule-2-Class 2,Steel Cylinder Pipe with Concrete Lining and Coating conforming to IS 1916/1989 (Steel cylinder Pipe Re-enforcement RCC)

22 CSIDC_RC.28.57.45 300 4075.00 23 CSIDC_RC.28.57.46 400 5613.00 24 CSIDC_RC.28.57.47 450 6106.00 25 CSIDC_RC.28.57.48 500 9132.00 26 CSIDC_RC.28.57.49 600 10953.00 27 CSIDC_RC.28.57.50 700 12774.00 28 CSIDC_RC.28.57.51 800 14595.00 29 CSIDC_RC.28.57.52 900 16416.00 30 CSIDC_RC.28.57.53 1000 20583.00 31 CSIDC_RC.28.57.54 1100 22639.00 32 CSIDC_RC.28.57.55 1200 30323.00 33 CSIDC_RC.28.57.57 1400 35371.00 34 CSIDC_RC.28.57.58 1500 37895.00 35 CSIDC_RC.28.57.59 1600 47922.00 36 CSIDC_RC.28.57.60 1700 50914.00 37 CSIDC_RC.28.57.61 1800 53906.00 38 CSIDC_RC.28.57.63 2000 69269.00 39 CSIDC_RC.28.57.65 2200 76190.00 40 CSIDC_RC.28.57.70 2700 118809.00 41 CSIDC_RC.28.57.73 3000 132003.00



Schedule-4- Class 4,Steel Cylinder Pipe with Concrete Lining and Coating conforming to IS 1916/1989 (Steel cylinder Pipe Re-enforcement RCC)

63 CSIDC_RC.28.57.107 300 4095.00 64 CSIDC_RC.28.57.109 400 5633.00 65 CSIDC_RC.28.57.110 450 6127.00 66 CSIDC_RC.28.57.111 500 9153.00 67 CSIDC_RC.28.57.112 600 10974.00


6/66


68 CSIDC_RC.28.57.113 700 12795.00 69 CSIDC_RC.28.57.114 800 16494.00 70 CSIDC_RC.28.57.115 900 18651.00 71 CSIDC_RC.28.57.116 1000 25296.00 72 CSIDC_RC.28.57.117 1100 27789.00 73 CSIDC_RC.28.57.118 1200 31345.00 74 CSIDC_RC.28.57.120 1400 41927.00 75 CSIDC_RC.28.57.121 1500 45203.00 76 CSIDC_RC.28.57.122 1600 55415.00 77 CSIDC_RC.28.57.123 1700 58876.00 78 CSIDC_RC.28.57.124 1800 62337.00 79 CSIDC_RC.28.57.126 2000 78636.00 80 CSIDC_RC.28.57.128 2200 96809.00 81 CSIDC_RC.28.57.131 2500 121723.00 82 CSIDC_RC.28.57.133 2700 131456.00 83 CSIDC_RC.28.57.136 3000 157318.00



Note :- Technical particulars as per Annexure B enclosed

4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State) 5. EXCISE DUTY : Not Applicable 6. SALES TAX /VAT/CST Extra, if applicable

TIN –No. 23919093848 Address:

M/s Universal Controls & Systems, 36/5 Sector H, Govindpura Industrial Area, Bhopal (M.P.) Mob.-09926320005 E-Mail: [email protected]


7/66


7. DELIVERY PERIOD : 45 Days

8. a. ANNUAL TURN OVER : 2014-2015- 10104987.00 2013-2014- 2005000.00 2012-2013- Nil

b. MONETARY LIMIT : 11 Lakhs

c. INSTALLED CAPACITY : (as per NSIC Registration Bhopal Installed Capacity Certificate) Description Annual Capacity

Steel Cylinder Pipe 24000 Mtrs

9. SLAB DISCOUNT (IF ANY) : Nil

10. PRICES : Price are firm and Final

11. MINIMUM QUANTITY IN : Not Mentioned. SINGLE SUPPLY ORDER

12. STATUS OF RC HOLDING : Manufacturer FIRM

13. REGISTRATION STATUS : Manufacturer is Registered with NSIC Bhopal Registration No:- NSIC/GP/BHO/2014/0007810 Validity Dated 21/11/2016 (The firm shall renew the license well in time No, supply order to be issued by DDO`s during expiry period)

14. BIS LICENSE : NM

15. PAYING AUTHORITY : As Mentioned in supply order to be issued by Direct Demanding Officers (DDOs).

16. PAYMENT TERMS : The payment of full 100% of prices of the stores of each consignment there-of will be made after receipt and acceptance of the stores by the consignee/interim consignee in full and good condition within 20 days as per SPR rule No.11, if the bills are in order. In case of delay in payment without any reason the department will be liable to pay interest as per prevailing bank rate. Bills are to be submitted in the prescribed form of the paying authority of purchaser / indenter and are to be supported with inspection note issued by the inspector and consignee’s Receipt Certificate.

17. INSPECTION AUTHORITY: CSIDC (DEPARTMENTAL TECHNICAL WING) OR

ADG (Q & A) , DGS&D, Jeewan Tara Building 5 Parliament Street New Delhi 110001 OR

Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.) OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) OR


8/66


General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah)

OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)

18. QUALITY ASSURANCE : CSIDC (DEPARTMENTAL TECHNICAL WING) Shri Sanjiv Awasthy Mob. No. 9926999936

Email- [email protected] OR

Dy. Director (Q&A), DGS&D, Bhilai (C.G.) Shri Man singh Mob. No. 9424120029 E-mail- [email protected] OR

Manager (Operation) Indian Register of Shipping Senior MIG-2, Secter A, 1st Floor, in front of Bank of India Indrapuri Bhopal. (M.P.)

Shri Amit Kumar Gupta Mob. No. 8871453225] M. Nazim Athar Mob. No. 8085182339 E-mail- [email protected]

OR Chief Engineer, Project & Development India Ltd. 4st floor, 4/2 Karaya Road, 67 Shekespeare Sarani Kolkata (W.B.) Fax No. 033&22873274

OR General Manager (Inspection) RITES Ltd. Churchgate Station Road, Second Floor, M.K. Road, Mumbai-400020 (Mah) Mob. No. 02222084155 E-mail- [email protected] OR Manager (Operations) SGS India Pvt. Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal-462011. (M.P.)

Shri Jitendra Raj Mob. No. 9752848321 E-mail- [email protected]

19. PLACE WHERE THE STORES

ARE TO BE OFFERED FOR INSPECTION : M/s Universal Controls & Systems,

36/5 Sector H, Govindpura Industrial Area, Bhopal (M.P.) Mob.-09926320005 E-Mail: [email protected]

20. INSPECTION CHARGES : Inspection charges 0.60%+ Service Tax As applicable to Be paid extra at the time of inspection to Quality Assurance Officer which will be billed by the unit along with bill of the material and will be reimbursed by the paying authority of DDO.


9/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/UC&S/7221 Dated: 12-04-2016 21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form

No. 1, Clause 7, the Purchaser /DDOs may require the contractor to furnish a security deposit which shall be made after issue of the acceptance of the supply order within the period specified by the purchaser / DDOs. Such security deposit shall not ordinarily exceed 3%. The security shall be in form of Demand Drafts issued by any of the Scheduled Commercial Banks. No other form of security is to be accepted. The security deposit amount is to be refunded after successful completion of the supply.

22. Special Note : 1. Purchasing Departments/end user will ensure to sending The copy of every order to this office. 2. Purchasing Departments/end user will ensure to Pre

Dispatch inspection of stores through Inspection agency enlisted in the CSIDC Panel.

3. Purchasing Departments/end user will be responsible for ensuring the Quality of accepted stores.

4. Purchasing Department/end user shall be ensure to execute the Integrity Pact between BUYER and BIDDER/ SUPPLIER in accordance with the letter vide No.799/eq-l-@2013 New Raipur Dated 10.07.2013 and 243/fo-@fu-@pkj@2013 New Raipur Dated 06.07.2013 issued by the Chief Secretary. Govt. of Chhattisgarh.

5. Purchasing Department/end user will ensure to issue the purchase Order in accordance with the Store Purchase Rules-2002 (As Amended) vide Clause No.-13


10/66


Annexure – B

CSIDC/MKD/TECH/2015-16/38

TECHNICAL PARTICULARS FOR Steel Cylinder Pipes with Concrete Lining and Coating conforming to IS 1916/1989, (Steel Cylinder

Pipe Re-enforcement RCC) (TSC 17-12-2015)

Specification :- Steel Cylinder Pipes with Concrete Lining and Coating conforming to IS 1916/1989, (Steel Cylinder Pipe Re-enforcement RCC) with up to date amendments, if any in the following Sizes & Classifications:

Class of Pipe Test Pressure Nominal Internal Diameter in mm Class - 1 0.5 Mpa (or 50m Head) 300, 400, 450, 500, 600, 700,800, 900, 1000, 1100,

1200, 1400, 1500, 1600, 1700, 1800, 2000, 2200, 2500, 2700, 3000

Class - 2 1.0 Mpa (or 100m Head) 300, 400, 450, 500, 600, 700,800, 900, 1000, 1100, 1200, 1400, 1500, 1600, 1700, 1800, 2000, 2200, 2700 & 3000

Class – 3 1.5 Mpa (or 150m Head) 300, 400, 450, 500, 600, 700,800, 900, 1000, 1100, 1200, 1400, 1500, 1600, 1700, 1800, 2000, 2200, 2500, 2700 & 3000

Class – 4 2.0 Mpa (or 200m Head) 300, 350, 400,450, 500, 600, 700,800, 900, 1000, 1100, 1200, 1400, 1500, 1600, 1700, 1800, 2000, 2200, 2500, 2700 & 3000

Class – 5 2.5 Mpa (or 250m Head) 300,350,400, 450, 500, 600, 800, 900, 1000, 1100, 1200, 1400, 1500, 1600, 1700, 1800, 2000, 2200, 2500, 2700 & 3000

Note :-

1. All the Pipes shall be supplied with Plain ends. Pipes of Nominal internal diameter up to 700mm shall be supplied along with one collar with each pipe.

2. The length in which the pipes are to be supplied shall be as per the requirement of the purchaser. However, the recommended length is 6 meters

3. The Steel Cylinder used in the pipes shall be manufactured from steel plates conforming to IS: 2062/1999. At the time of inspection, the supplier shall submit the Test Certificate of the Steel used in the pipes.

4. Minimum Thickness of the Plates used for the manufacture of the Steel Cylinder shall be as given in the Table 1 of IS: 1916/1989.

5. The Steel Cylinder shall be fabricated as per clause 9.1 of IS: 1916/1989. The ends of the Steel Cylinder shall be square with its longitudinal axis.

6. Each Steel Cylinder shall be subject, before concreting. to hydrostatic test under a water pressure equivalent to the "Test Pressure" given in the above Table. Manufacturer shall maintain records of Hydrostatic Testing of Steel Cylinders and shall submit the same to the Inspecting officer at the time of Inspection.

(S.N Chopra)

Incharge PS-III

11/66


7. Materials used for Lining & Coating shall be as per clause 11 of IS: 1916/1989. 8. Minimum Thickness of Lining & Minimum Thickness of coating shall be as given in the table 2 of

IS: 1916/1989. 9. Minimum reinforcement in the coating shall be As per Clause 13.1 of IS: 1916/1989. 10. Curing of the pipes shall be done as per the clause 13.4 of IS: 1916/1989.

11. Beside manufacturing facilities, the manufacturing units shall have facilities for conducting the

following tests: i) Compressive Strength of Concrete Cubes. ii) Hydrostatic Test for Steel Cylinder & Finished Pipes. 12. The following information shall be shall be clearly marked on the each Finished Pipe. i) Size of Pipe, ii) Class of Pipe, iii) Date of manufacture, and iv) Indication of the source of manufacture 13. Workmanship and finish of the Pipes shall be as per clause 5 of IS: 1916/1989. 14. The tolerance on internal diameter and length of the pipes shall be as per Clause 4.1.1 & 4.2 of IS:

1916/1989. 15. The area concerned of Approved Inspection Agency shall inspect the Pipes. Inspection comprises

Visual Examination of the Finished Pipes, Dimensional Checking & Hydrostatic Test of Finished Pipes at Factory. The Finished pipes shall be subjected to Factory Hydrostatic Pressure Test under a water pressure equivalent to fifty percent of the Test Pressure given in the above table. The pipe shall be tested for 3 minutes. During the Test the pipe shall be absolutely watertight and show no leaks, weeping or defects considered determental to the pipe's performance.

16. Scale of sampling, depending on the no. of pipes in the offered lot is given below :

No. of Pipes in the offered lot

No. of Samples for Dimensional Checking

No. of samples for Hydrostatic Test of Finished Pipe at Factory

Upto 50 3 1 51 to 100 5 1 101 to 300 8 2 301 to 500 13 2

501 to 1000 26 4 17. Tenderer's shall quote rates of Per Meter of the pipe, on F.O.R. Destination basis, excluding Taxes

& duties in the enclosed proforma. 18 Pre-despatch inspection of stores against the R/C shall be reported as per CSIDC Inspection

Report Performa. A copy of this Performa is enclosed with the hard copy of T.E. The suppliers down loading the tender from Web site can obtain the copy of this Form from Web site itself.

Recommended by Technical Specification Committee Dated 17-12-2015

(S.N Chopra) Incharge PS-III

12/66


SCHEDULE ‘B’ (SPECIAL CONDITION OF CONTRACT)

Rate Contract will be governed by the terms & conditions laid down in the CSIDC form No. 1 & 2.


Incharge Marketing

13/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/UC&S/7221 Dated: 12-04-2016 SCHEDULE “C”

LIST OF PARALLEL RATE CONTRACT FOR ITEM- STEEL CYLINDER PIPE WITH CONCRETE LINING AND COATING CONFORMING TO IS 1916/1989

S.No. Name of the RC Holding Firm Validity of

Rate Contract Rate Contract No.

1 2 3 4


12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



14/66


SCHEDULE – “D”

FORMAT FOR QUATERLY DRAWAL REPORT

Name of the Firm __________________ I- Jan-Mar Report No. __________________ II- Apr-June Rate Contract No. __________________ III- July-Sept. Date of Submission __________________ IV- Oct - Dec Total Position of Order against Rate Contract till the submission of Report. S.No. Name of

Department Quantity and Value of Orders Received (Rs.)

Quantity and Value of Orders Executed (Rs.)

Balance Quantity and Value to be Supplied (Rs.)

Reasons

Foot 1. Value indicate should be a) Value of orders received during the quarter-Rs.

Total value inclusive of all Taxes duties and incidental b) Value of orders supplied during the quarter-Rs. Charges

2. Nil report should also be Submitted.


Incharge Marketing

15/66



Registered A/D

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/MDI/7222 Dated: 12-04-2016

To, M/s M.D. Industries,

59-A, Sector-H Govindpura Industrial Area, Bhopal Mob.-09826019065 E-Mail: [email protected]



Dear Sir,








16/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/MDI/7222 Dated: 12-04-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.















M.K. Road, Mumbai-400020 (vii) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal



IS 1916/1989”




17/66


SCHEDULE “A” Description of Stores, Prices, Duties/Taxes

For the supply of Item- Steel Cylinder Pipe with Concrete Lining and Coating conforming to IS 1916/1989 as per Annexure’A’ enclosed.

1. (a) NAME AND FULL ADDRESS OF M/s M.D. Industries,

THE FIRM :- 59-A, Sector-H Govindpura Industrial Area, Bhopal Mob.-09826019065

(b) NAME AND FULL ADDRESS OF M/s M.D. Industries,

MANUFACTURER :- 59-A, Sector-H Govindpura Industrial Area, Bhopal Mob.-09826019065



Sl. No.






18/66









19/66






4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State) 5. EXCISE DUTY : Not Applicable

6. SALES TAX /VAT/CST : Extra, if applicable TIN –No. 23073702320

Address: M/s M.D. Industries,



Incharge Marketing

20/66



8. a. ANNUAL TURN OVER : 2014-2015- 63349179.00 2013-2014- 84162935.00 2012-2013- 95462493.00

b. MONETARY LIMIT : 14 Lacs


Steel Cylinder Pipe 16100 Mtrs





13. REGISTRATION STATUS : Manufacturer is Registered with NSIC Bhopal Registration No:- NSIC/GP/BHO/2015/0017729 Validity Dated 10-05-2018 (The firm shall renew the license well in time No, supply order to be issued by DDO`s during expiry period)

14. BIS LICENSE : NM (The firm shall renew the license well in time No, supply order to be issued by DDO`s during expiry period)







21/66













ARE TO BE OFFERED FOR INSPECTION : M/s M.D. Industries,




22/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/MDI/7222 Dated: 12-04-2016 21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form








23/66


Annexure – B






1200, 1400, 1500, 1600, 1700, 1800, 2000, 2200, 2500, 2700, 3000





Note :-




4. Minimum Thickness of the Plates used for the manufacture of the Steel Cylinder shall be as given in the Table 1 of IS : 1916/1989.

5. The Steel Cylinder shall be fabricated as per clause 9.1 of IS : 1916/1989. The ends of the Steel Cylinder shall be square with its longitudinal axis.


(S.N Chopra)

Incharge PS-III

24/66



IS : 1916/1989. 9. Minimum reinforcement in the coating shall be As per Clause 13.1 of IS: 1916/1989. 10. Curing of the pipes shall be done as per the clause 13.4 of IS: 1916/1989.


following tests: iii) Compressive Strength of Concrete Cubes. iv) Hydrostatic Test for Steel Cylinder & Finished Pipes. 12. The following information shall be shall be clearly marked on the each Finished Pipe. v) Size of Pipe, vi) Class of Pipe, vii) Date of manufacture, and viii) Indication of the source of manufacture 13. Workmanship and finish of the Pipes shall be as per clause 5 of IS : 1916/1989. 14. The tolerance on internal diameter and length of the pipes shall be as per Clause 4.1.1 & 4.2 of IS :

1916/1989. 15. The area concerned of Approved Inspection Agency shall Inspect the Pipes. Inspection comprises






Upto 50 3 1 51 to 100 5 1 101 to 300 8 2 301 to 500 13 2






25/66





Incharge Marketing

26/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/MDI/7222 Dated: 12-04-2016 SCHEDULE “C”




1 2 3 4


12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



27/66








Reasons





Incharge Marketing

28/66



Registered A/D

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/JEW/7223 Dated: 12-04-2016

To, M/s Jain Engineeing Works,

367-369, Agrawal Udhyog Nagar, Gram Palda, Nemawar Road, Indore (M.P.) Ph.-0731-4092915, Mob.-9993399993, [email protected]



Dear Sir,








29/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/JEW/7223 Dated: 12-04-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.















M.K. Road, Mumbai-400020 (viii) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal



IS 1916/1989”




30/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/JEW/7223 Dated: 12-04-2016 SCHEDULE “A”


1916/1989 as per Annexure’A’ enclosed. 1. (a) NAME AND FULL ADDRESS OF M/s Jain Engineeing Works,

THE FIRM :- 367-369, Agrawal Udhyog Nagar, Gram Palda, Nemawar Road, Indore (M.P.) Ph.-0731-4092915, Mob.-9993399993,

(b) NAME AND FULL ADDRESS OF M/s Jain Engineeing Works, MANUFACTURER :- 367-369, Agrawal Udhyog Nagar,

Gram Palda, Nemawar Road, Indore (M.P.) Ph.-0731-4092915, Mob.-9993399993,



Sl. No.






31/66









32/66






4. TERMS OF DELIVERY : F. O. R Destination (Any where in C.G. State) 5. EXCISE DUTY : Not Applicable 6. SALES TAX /VAT/CST Extra, if applicable


M/s Jain Engineeing Works, 367-369, Agrawal Udhyog Nagar, Gram Palda, Nemawar Road, Indore (M.P.) Mob.-9993399993, [email protected]


Incharge Marketing

33/66



8. a. ANNUAL TURN OVER : 2014-2015- 16,21,08,827 2013-2014- 13,29,27,182 2012-2013- 12,53,74,148


c. INSTALLED CAPACITY : (as per NSIC Registration Indore Installed Capacity Certificate) Description Annual Capacity

Steel Cylinder Pipe 1000 MT


10. PRICES : Price are Firm and Final



13. REGISTRATION STATUS : Manufacturer is Registered with NSIC Indore Registration No:- NSIC/GP/IND/J-07/15-16/1312 Validity Dated 15/08/2017 (The firm shall renew the license well in time No, supply order to be issued by DDO`s during expiry period)








34/66













ARE TO BE OFFERED FOR INSPECTION : M/s Jain Engineeing Works,

367-369, Agrawal Udhyog Nagar, Gram Palda, Nemawar Road, Indore (M.P.) Ph.-0731-4092915, Mob.-9993399993, [email protected]


35/66



21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form








36/66


Annexure – B






1200, 1400, 1500, 1600, 1700, 1800, 2000, 2200, 2500, 2700, 3000





Note :-







(S.N Chopra)

Incharge PS-III

37/66





following tests: v) Compressive Strength of Concrete Cubes. vi) Hydrostatic Test for Steel Cylinder & Finished Pipes. 12. The following information shall be shall be clearly marked on the each Finished Pipe. ix) Size of Pipe, x) Class of Pipe, xi) Date of manufacture, and xii) Indication of the source of manufacture 13. Workmanship and finish of the Pipes shall be as per clause 5 of IS : 1916/1989. 14. The tolerance on internal diameter and length of the pipes shall be as per Clause 4.1.1 & 4.2 of IS :







Upto 50 3 1 51 to 100 5 1 101 to 300 8 2 301 to 500 13 2






38/66





Incharge Marketing

39/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/JEW/7223 Dated: 12-04-2016 SCHEDULE “C”




1 2 3 4


12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



40/66








Reasons





Incharge Marketing

41/66



Registered A/D

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/NI/ 7224 Dated: 12-04-2016

To, M/s Neeti Infraventure Pvt. Ltd., Survey No.-59/6-59/11, Eden Rice Mill Compound, Kathadi, Raipur (C.G.) Mob.-9630408586 [email protected]



Dear Sir,








42/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/NI/7224 Dated: 12-04-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.















M.K. Road, Mumbai-400020 (ix) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal



IS 1916/1989”




43/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/NI/ 7224 Dated: 12-04-2016 SCHEDULE “A”



1. (a) NAME AND FULL ADDRESS OF M/s Neeti Infraventure Pvt. Ltd., THE FIRM :- Survey No.-59/6-59/11,

Eden Rice Mill Compound, Kathadi, Raipur (C.G.) Mob.-9630408586 [email protected]

(b) NAME AND FULL ADDRESS OF M/s Neeti Infraventure Pvt. Ltd.,

MANUFACTURER :- Survey No.-59/6-59/11, Eden Rice Mill Compound, Kathadi, Raipur (C.G.) Mob.-9630408586 [email protected]



Sl. No.






44/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/NI/7224 Dated: 12-04-2016








45/66







6. SALES TAX /VAT/CST Extra, if applicable


M/s Neeti Infraventure Pvt. Ltd., Survey No.-59/6-59/11, Eden Rice Mill Compound, Kathadi, Raipur (C.G.) Mob.-9630408586 [email protected]


46/66



8. a. ANNUAL TURN OVER : 2014-2015- 8,04,38,956 2013-2014- 7,49,46,407 2012-2013- 53,32,143

b. MONETARY LIMIT : NM

c. INSTALLED CAPACITY : (as per DTIC Registration Raipur Installed Capacity Certificate) Description Annual Capacity

Steel Cylinder Pipe 5000 M.T.


10. PRICES : Price are Firm and Final



13. REGISTRATION STATUS : Manufacturer is Registered with DTIC Raipur Registration No:- 22/011/11/01429 Dated 11/11/2011 (The firm shall renew the license well in time No, supply order to be issued by DDO`s during expiry period)








47/66













ARE TO BE OFFERED FOR INSPECTION : M/s Neeti Infraventure Pvt. Ltd.,

Survey No.-59/6-59/11, Eden Rice Mill Compound, Kathadi, Raipur (C.G.) Mob.-9630408586 [email protected]



48/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/NI/ 7224 Dated: 12-04-2016 21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form








49/66


Annexure – B






1200, 1400, 1500, 1600, 1700, 1800, 2000, 2200, 2500, 2700, 3000





Note :-








50/66





following tests: vii) Compressive Strength of Concrete Cubes. viii) Hydrostatic Test for Steel Cylinder & Finished Pipes. 12. The following information shall be shall be clearly marked on the each Finished Pipe. xiii) Size of Pipe, xiv) Class of Pipe, xv) Date of manufacture, and xvi) Indication of the source of manufacture 13. Workmanship and finish of the Pipes shall be as per clause 5 of IS : 1916/1989. 14. The tolerance on internal diameter and length of the pipes shall be as per Clause 4.1.1 & 4.2 of IS :







Upto 50 3 1 51 to 100 5 1 101 to 300 8 2 301 to 500 13 2






51/66





Incharge Marketing

52/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/NI/7224 Dated: 12-04-2016 SCHEDULE “C”




1 2 3 4


12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



53/66








Reasons





Incharge Marketing

54/66



Registered A/D

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/UP/7225 Dated: 12-04-2016

To, M/s Universal Projects, P-08, MPAKVN, Industrial Growth Centre, Borgaon, Dist.-Chhindware (M.P.) Ph.-0712-2764197, Mob.-09370226373 Email.- [email protected]



Dear Sir,








55/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/UP/ 7225 Dated: 12-04-2016 Copy to, 1. The Secretary, Chhattisgarh Vidhan Sabha, Raipur.















M.K. Road, Mumbai-400020 (x) Operations Manager SGS India Pvt, Ltd. 43, RR Arcade, Zone-2, MP Nagar, Bhopal



IS 1916/1989”




56/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/UP/ 7225 Dated: 12-04-2016 SCHEDULE “A”



1. (a) NAME AND FULL ADDRESS OF M/s Universal Projects THE FIRM :- P-08, MPAKVN, Industrial Growth Centre,

Borgaon, Dist.-Chhindware (M.P.) Ph.-0712-2764197, Mob.-09370226373 Email.- [email protected]

(b) NAME AND FULL ADDRESS OF M/s Universal Projects,

MANUFACTURER :- P-08, MPAKVN, Industrial Growth Centre, Borgaon, Dist.-Chhindware (M.P.) Ph.-0712-2764197, Mob.-09370226373 Email.- [email protected]



Sl. No.






57/66









58/66







6. SALES TAX /VAT/CST Extra, if applicable


M/s Universal Projects, P-08, MPAKVN, Industrial Growth Centre, Borgaon, Dist.-Chhindware (M.P.) Ph.-0712-2764197, Mob.-09370226373 Email.- [email protected]


59/66



8. a. ANNUAL TURN OVER : 2014-2015- 142 lacs 2013-2014- 108.51 lacs 2012-2013- 107.23 lacs



Steel Cylinder Pipe 12000 M.T.





13. REGISTRATION STATUS : Manufacturer is Registered with NSIC Bhopal Registration No:- NSIC/GP/BHO/2014/0006541 Validity Dated 11/09/2017 (The firm shall renew the license well in time No, supply order to be issued by DDO`s during expiry period)








60/66













ARE TO BE OFFERED FOR INSPECTION : M/s Universal Projects,

P-08, MPAKVN, Industrial Growth Centre, Borgaon, Dist.-Chhindware (M.P.) Ph.-0712-2764197, Mob.-09370226373 Email.- [email protected]



61/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/UP/ 7225 Dated: 12-04-2016 21. SECURITY DEPOSIT : As per General conditions of contract, CSIDC Form








62/66


Annexure – B






1200, 1400, 1500, 1600, 1700, 1800, 2000, 2200, 2500, 2700, 3000





Note :-







(S.N Chopra)

Incharge PS-III

63/66





following tests: ix) Compressive Strength of Concrete Cubes. x) Hydrostatic Test for Steel Cylinder & Finished Pipes. 12. The following information shall be shall be clearly marked on the each Finished Pipe. xvii) Size of Pipe, xviii) Class of Pipe, xix) Date of manufacture, and xx) Indication of the source of manufacture 13. Workmanship and finish of the Pipes shall be as per clause 5 of IS : 1916/1989. 14. The tolerance on internal diameter and length of the pipes shall be as per Clause 4.1.1 & 4.2 of IS :







Upto 50 3 1 51 to 100 5 1 101 to 300 8 2 301 to 500 13 2






64/66





Incharge Marketing

65/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/UP/7225 Dated: 12-04-2016 SCHEDULE “C”




1 2 3 4


12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



12-04-2016 To

11-04-2017



66/66

Rate Contract No. CSIDC/MKD/15-16/125/6003/SCP/UP/ 7225 Dated: 12-04-2016







Reasons





Incharge Marketing

schedule “c” list of parallel rate contract for item

Documents