SIMATIC

S7-400S7-400 Automation System Module Data

Reference Manual

Ausgabe 11/2016A5E00850736-08

Preface

General specifications 1

Rack 2

Power supply modules 3

Digital modules 4

Analog modules 5

Interface modules 6

S5 interface IM 463-2 7PROFIBUS DP master interface IM 467/IM 467 FO 8Cable duct and fan subassemblies 9

RS 485 repeater 10Parameter sets of signal modules ADiagnostic data of signal modules B

Accessories and spare parts CDirective on handling electrostatic sensitive devices (ESD)

D

List of abbreviations E

Legal informationWarning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger.

DANGERindicates that death or severe personal injury will result if proper precautions are not taken.

WARNINGindicates that death or severe personal injury may result if proper precautions are not taken.

CAUTIONindicates that minor personal injury can result if proper precautions are not taken.

NOTICEindicates that property damage can result if proper precautions are not taken.If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage.

Qualified PersonnelThe product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems.

Proper use of Siemens productsNote the following:

WARNINGSiemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed.

TrademarksAll names identified by are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of LiabilityWe have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.

Siemens AGDivision Process Industries and DrivesPostfach 48 4890026 NRNBERGGERMANY

A5E00850736-08 11/2016 Subject to change

Copyright Siemens AG 2016.All rights reserved

Preface

Purpose of this manual The information contained in this manual can be used as a reference for operating, for descriptions of the functions, and for the specifications of the signal modules, power supply modules and interface modules of the S7-400.

How to configure, assemble and wire these modules in an S7-400 system is described in the installation manuals for each system.

Basic knowledge required This manual requires general knowledge of automation engineering.

In addition, you are required to know how to use computers or devices with similar functions (e. g. programming devices) under Windows 2000 or XP operating systems. Since S7-400 is configured with the STEP 7 basic software, you have to have a good working knowledge of the software. You can acquire this knowledge in the manual "Programming with STEP 7". Read the notes on the safety of electronic controllers in the appendix of the Installation manual especially when using an S7-400 in safety-relevant areas.

Target groupThis manual is aimed at people with the required qualifications to commission, operate and maintain the products described.

Scope of the manual The manual applies to the S7-400 automation system.

Changes compared to the previous versionThe following changes have been made compared to the previous version of this manual S7-400 Automation System; Module Specifications, Edition 05/2007 (A5E00850735-04):

The revision of the ATEX standard was taken into consideration in chapter Standards, certificates and approvals (Page 13).

ApprovalsYou can find details on the certificates and approvals in the chapter General specifications (Page 13)General specifications.

S7-400 Automation System Module DataReference Manual, Ausgabe 11/2016, A5E00850736-08 3

Position in the information landscape This manual forms part of the S7-400 documentation.

System Documentation packageS7-400 S7-400 automation system, installation

S7-400 automation system, module specifications S7-400 automation system, CPU specifications S7-400 instruction list

Further InformationYou can find further and additional information on the topics in this manual in the following manuals:

Programming with STEP 7 (http://support.automation.siemens.com/WW/view/en/18652056)

Configuring Hardware and Communication Connections with STEP 7 (http://support.automation.siemens.com/WW/view/en/18652631)

System and Standard Functions (http://support.automation.siemens.com/WW/view/en/1214574)

PROFINET system description (http://support.automation.siemens.com/WW/view/en/19292127)

Isochrone mode (http://support.automation.siemens.com/WW/view/en/15218045)

Recycling and disposalThe S7-400 is environmentally friendly and is thus recyclable. For environmentally compliant recycling and disposal of your discarded device, please contact a company certified for the disposal of electronic waste.

Additional supportIf you have any questions relating to the products described in this manual and cannot find the answers in this documentation, please contact your Siemens partner at the appropriate office or sales and service location.

You will find information on who to contact at:

Contact partners (http://www.siemens.com/automation/partner)

A guide to the technical documents for the various SIMATIC products and systems is available at:

Documentation (http://www.automation.siemens.com/simatic/portal/html_76/techdoku.htm)

You can find the online catalog and order system under:

Catalog (http://mall.automation.siemens.com/)

Preface

S7-400 Automation System Module Data4 Reference Manual, Ausgabe 11/2016, A5E00850736-08

http://support.automation.siemens.com/WW/view/en/18652056http://support.automation.siemens.com/WW/view/en/18652631http://support.automation.siemens.com/WW/view/en/18652631http://support.automation.siemens.com/WW/view/en/1214574http://support.automation.siemens.com/WW/view/en/1214574http://support.automation.siemens.com/WW/view/en/19292127http://support.automation.siemens.com/WW/view/en/19292127http://support.automation.siemens.com/WW/view/en/15218045http://www.siemens.com/automation/partnerhttp://www.automation.siemens.com/simatic/portal/html_76/techdoku.htmhttp://mall.automation.siemens.com/

Training centerWe offer a range of relevant courses to help you to get started with the SIMATIC S7 automation system. Please contact your regional training center or our central training center in 90327 Nuremberg, Germany for details:

Training (http://www.sitrain.com/index_en.html)

Technical support You can contact Technical Support for all Industry Automation products using the Web form for Support Request Support Request (http://www.siemens.de/automation/support-request)

Additional information about our technical support is available on the Internet at Technical Support (http://support.automation.siemens.com)

Service & Support on the InternetIn addition to our documentation, we offer a comprehensive knowledge base online on the Internet at:

Service & Support (http://www.siemens.com/automation/service&support)

There you will find:

Our newsletter containing up-to-date information on your products.

The latest documents via our search function in Service & Support.

An international forum where users and specialists can exchange their experiences.

Your local contact partner for automation and drive technology in our contacts database.

Information about on-site service, repairs and spare parts. Much more can be found under "Services".

Applications and tools for optimizing operations with SIMATIC S7. Performance measurements for DP and PN, for example, are also published here.

Preface

S7-400 Automation System Module DataReference Manual, Ausgabe 11/2016, A5E00850736-08 5

http://www.sitrain.com/index_en.htmlhttp://www.siemens.de/automation/support-requesthttp://support.automation.siemens.comhttp://www.siemens.com/automation/service&support

Preface

S7-400 Automation System Module Data6 Reference Manual, Ausgabe 11/2016, A5E00850736-08

Table of contents

Preface.................................................................................................