Rubber Products

The Definition of Rubber Products

Rubber product refers to the natural and synthetic rubber as raw materials to have the

production of various rubber products, activities, including the use of waste rubber production

and rubber products.

General Rubber

Refers to replace some or all natural rubber using plastic, such as styrene butadiene rubber,

butadiene rubber, isoprene rubber, and it is mainly used in the manufacture of rubber

product. The demand of general rubber is large, and it is the main variety of synthetic rubber.

Styrene butadiene rubber is composed of butadiene and styrene copolymer made, and its

production is the largest in all general synthetic rubber. Butadiene rubber is made by solution

polymerization of butadiene, and polybutadiene rubber has excellent cold resistance, wear

resistance and elasticity. Ethylene propylene rubber has good aging resistance performance.

Butadiene rubber majority for the production of tires, but little part is used in the manufacture

of cold products, cushioning material, such as rubber overshoes and adhesive tape. The tear

resistance variation, wet skid resistance of Butadiene rubber is not good. Ethylene propylene

rubber takes ethylene and propylene as main raw materials, aging resistance, electrical

insulation and resistance to ozone outstanding performance. Many custom rubber products

are made of this material. A large number of Ethylene propylene can be used in oil filling and

filling of carbon black products in lower prices, but the ethylene-propylene rubber chemical

stability is good, with abrasion resistance, elasticity, resistance to oil and styrene butadiene

rubber. The range of uses in Ethylene propylene rubber are very wide, it can be used as a

tire sidewall rubber strip and the inner tube, and automotive parts, and it also can be used for

wire, cable sheathing and high pressure, high pressure insulating materials. It can produce

shoes, health supplies and other light products. Chloroprene rubber, with chloroprene as

main raw materials, through homopolymerization and small amounts of other monomers

copolymerized. Such as high tensile strength, heat resistance, light fastness, excellent aging

resistance, oil resistance is superior to natural rubber, styrene-butadiene rubber, butadiene

rubber. With strong resistance and excellent resistance to flame spread properties, chemical

stability in good water resistance.

The Introduction of PVC

PVC color is yellowish and translucent, shiny. Transparency is better than polyethylene. With

the additive dosage, it can be divided into soft, hard PVC products. The soft product is tough

and it feels sticky. Many pvc charms have also come to our daily life. Hard products hardness

is higher than that of low density polyethylene, polypropylene and below, in which there will

be a whitening phenomenon. Products: sheet metal, pipes, common soles, toys, doors and

windows, cable jacket, such as stationery. It is also a use of a chlorine atom substituted

polyethylene in a hydrogen atom of polymeric materials.

The article is come from:http://fashion.jewellryboxes.net/custom-rubber-products/rubber-

products.htm