rubber products catalog

Rubber Products Catalog

visit us at warco.com

Fluorozone

INFINISIL and more!

New Products!Featuring

Proudly manufactured in the USA since 1910.

TM

America's choice for quality rubber.

Catalog effective: December 20, 2017

visit us at warco.com

Table of Contents

General Production Information

Specification Index

Sheet Rubber- Neoprene Sheet

- Nitrile (Buna-N) Sheet

- SBR Sheet

- Natural Rubber Sheet

- EPDM Sheet

- Skirtboard & Chute Lining

- AASHTO Bearing Pads

- Fluorozone® FKM & Viton™

- INFINISIL™ Silicone Sheet

- Butyl Sheet

- Cloth Inserted (CI) Sheet

- Thermoplastic Elastomer (TPE) Sheet

Rubber Mats & Matting- Corrugated Matting

- ASTM Switchboard Type 1 Matting

- KleenRite® Matting

- FingerTrac Entrance Mats

- Tredair Anti-Fatigue Comfort Mats

Rubber Extrusion- 60 Durometer Neoprene Tubing

- Neoprene Cable Jacket Tubing to MIL-R-6855

Utility Tarp Straps

Rubber Waterstop

Product Index

Terms & Conditions of Sale

Page:

. . . . . . . . . . . . . . . . 3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

. . . . . . . . . . . . . . . . . . . . . . . . . . . 18

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

. . . . . . . . . . . . . . . . . . . . . . . . . . 20

. . . . . . . . . . . . . . . . . . . . . . . . . . . 23

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

. . .. . . . . . . . . . . . . . . . . . . 27

. . . . . . . . . . . . . . . . . . . . . . . . 30

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

. . . . . . . . . . . . . . . . . . 30

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

. . . . . . . . . . . . . . . . . . . . . . . . . . . 31

. . . . . . . . . . . . . . . . . . . 31

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

. . . . . . . . . . . . . . . . . . . . . 32

. . . . . . . 32

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

. . . . . . . . . . . . . . . . . . . . . 37

Rubber Products Catalog

Proudly manufactured in the USA since 1910America's choice for quality rubber.

Sales, Manufacturing & Distribution750 North Main Street

Orange, California 92868Tel: 714-532-3355

Fax: 714-532-2238Email: [email protected]

Sales, Manufacturing & Distribution16310 Highway 15 NorthRipley, Mississippi 38663

Tel: 800-245-8748Fax: 662-837-0132

Email: [email protected]

Corporate Office1337 Braden Court


Fax: 714-532-2238

West American Rubber Company, LLC

Biltrite Ripley Operations, LLC

3Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]

GENERAL PRODUCTION INFORMATIONOur unique combination of equipment and talent allows WARCO BILTRITE to be thoroughly proficientin Large Volume, Short Run, and Custom Rubber production. Please contact our sales department for quotations on volume in excess of 1,000 lbs or on any Sheet, Matting, Extrusion, or Molded Rubber products not featured in our catalog. Additionally, we would be pleased to quote you on any custom molding, extrusion, sheet, mats, or matting products made to your requirements and specification.

For quotes, please contact customer service:

Toll Free: 800-245-8748 | Tel: 714-532-3355 | Fax: 714-532-2238 | Email: [email protected]

1/64” thick - 180 FT1/32” thick - 150 FT1/16” thick - 100 FT3/32” thick - 65 FT or 75 FT1/8” thick - 50 FT3/16” thick - 30 FT or 40 FT1/4” thick - 25 FT or 40 FT5/16” thick - 20 FT or 25 FT3/8” thick - 16.5 FT or 30 FT1/2” thick - 12.5 FT or 30 FT3/4” thick - 30 FT1” thick - 30 FT1 1/4” thick - 30 FT

Sheet Rubber Roll Length: Standard Roll approximate length ±10%

Custom FormulationsSheet Rubber SlittingFabric, Paper & Matte FinishTalc FreeStencillingColor MatchingTight TolerancesCustom Widths, Thicknessesand Lengths

.031” and thinner ± .010“

.032” to .061” ± .012“

.062” to .124” ± .016”

.125” to .186” ± .020”

.187” to .374” ± .031”

.375” to .500” ± .047”

.501” to .750” ± .094”

.751” and thicker ± 10%

Sheet RubberThickness Tolerance:(Standard RMA)

Closer tolerances and customthicknesses are available& can be quoted on request:

Tel: 714-532-3355

Toll-Free: 800-245-8748

Please call for details:Tel: 714-532-3355Toll-Free: 800-245-8748

Special Services and Optionsare Available:

1/64”1/32”1/16”3/32”1/8”3/16”1/4”5/16”3/8”1/2”5/8“3/4”7/8”1”

0.016”0.031”0.062”0.093”0.125”0.187”0.25”0.312”0.375”0.5”0.625“0.75”0.875”1.0”

0.397 mm0.793 mm1.588 mm2.381 mm3.175 mm4.763 mm6.35 mm7.938 mm9.525 mm12.7 mm15.875 mm19.05 mm22.225 mm25.4 mm

Fraction to Decimal toMillimeter Conversion:

Products may vary, please see productlisting for specific roll lengths. Per RMA, roll goods may contain multiple pieces.

All options may not be available on all products

Pricing: Sheet Rubber and Rubber Matting products are priced per foot ($/FT). Rubber Mats, Molded Rubber Sheets and Molded Bearing Pads are priced per each ($/EA). Extrusion is priced per foot ($/FT) or per 100 feet ($/CFT). Please call us for a quote.

Minimum Purchase:Regularly Stocked Sheet Item: 1 RollNon-Regularly Stocked Item: See Product for details or call us at 1-800-254-8748 for quoteCustom & Non-Catalog items: Please call for quote

Width Tolerance: Sheet Rubber comes trimmed or untrimmed. Trimmed Sheet Rubber is provided either 36”, 48”, or 72“ wide ± 1”. Untrimmed Sheet Rubber is provided either 36” usable, 48” usable, or 55“ usable and can measure approximately 3” in additional width. Custom widths are available, please call for details.

Sheet Rubber Finish: Unless otherwise noted, sheet rubber has a standard smooth finish. Textured (fabric) finish and matte finish are available on most materials at an additional cost. Please call for details.

Rubber Color: Unless otherwise noted, the standard color of our rubber is Black. Custom colors and color matching are available. Please call for details.

Test Reports: Short form test results, basic physicals, are available. Full test reports to particular specifications will be quoted on request. Certifications are sent with your order upon request at no charge.

Physical Properties: The minimum physical properties in this price list are obtained on ASTM test slabs and buttons.

Unless stated otherwise, products are manufactured to meet standard RMA Commercial guidelines. Per RMA, roll goods may contain multiple pieces.

ASTM and Product Physical Values: ASTM basic requirements for physical properties are based on values obtained from standard laboratory test specimens prepared and tested in accordance with the applicable ASTM test methods. Test results from specimens prepared from finished products may not duplicate values obtained from standard test specimens. Per ASTM D 2000, Section 7.1, Buyer agrees that when standard test specimens are cut from finished parts in accordance with Practice D 3183, a deviation to the extent of 10% on tensile strength and elongation values is permissible.

Payment Terms: Net 30 days. No Cash Discounts. New customer orders for shipment on open account are subject to credit approval.

Freight Terms: F.O.B. our warehouse location.

Price of material per foot ($/FT), pereach ($/EA) or per 100 feet ($/CFT)

WARCO BILTRITE Part Number

Regularly Stocked Items aredenoted with . Regularly StockedItems available for purchase bythe foot at warco.com/buy-the-footare denoted with

Price Page Key:

Durometer Hardness(Shore A ± 5)

1/32”

1/16”

3/32”

1/8”

75 Duro075F2124

3/16”

1/4”

Thic

kn

ess

(in

ch

es)

$29.9944228656

$54.5744228658

$76.4344228661

$107.9844228344

$163.6444228662

$219.9544228666

Width36”

MAGNIFY

75 Duro

$29.9944228656

$54.57

Please call or check warco.com for a quote.


ASTM Specification

ASTM C542ASTM E662ASTM D178-93ASTM D1330ASTM D2000 AAASTM D2000 BAASTM D2000 BCASTM D2000 CAASTM D2000 BFASTM D2000 BGASTM D2000 GEASTM D2000 HK

Military Specification

MIL-R-900MIL-G-1149MIL-R-2765MIL-R-3065 SBMIL-R-3065 SCMIL-R-3065 RSMIL-R-6855 Class 1MIL-R-6855 Class 2MIL-R-21252MIL-R-83248CMIL-R-83285MIL-STD-454

AMS

Aerospace MaterialSpecification

FDA

FDA Approved Ingredientsper 21 CFR 177.2600

Page

99301313-15, 18, 25, 30, 3115, 165 - 9171010 - 122322

Page

171212115, 6, 815, 16118, 321720, 221732

Page

9, 20, 22, 23

Page

7, 10, 11, 14, 15, 21, 22, 24, 29

NSF CompliantNSF 51 CompliantNSF 61 Compliant

A-A & ZZ-R

ZZ-R-765 2A & 2B(A-A-59588)

SAE J200

SAE J200 AASAE J200 BASAE J200 BCSAE J200 BF

Specialty Applications

HHP–151F - Cloth-InsertedFungus ResistantTransformer - General Electric A12C11E7Low Smoke, Low FlameHigh, Low TemperatureFabric Reinforced

AASHTO

AASHTO Grade 2AASHTO Grade 3

Transportation

Bio-Deisel CompatibleBoeing BSS 7239Bombardier SMP 800–CCaltrans 51–1.14 WaterstopsGeneral Motors (GMP.E/P.)Daimler Chrysler (MSAR)Ford (WSD-M2D)

Page

2828

Page

23

Page

1415, 165, 610

Page

25, 263212

92325, 26

Page18, 19 19

Page

1399332827-2929

Specification IndexWith two full laboratories and 3,000+ rubber compounds, WARCO BILTRITE is proficient at designing formulations to meet some of the world’s most stringent specifications. In addition to the specifications listed below, WARCO BILTRITE’s technical and development team is available to assist you with your specific requirements.

Please contact us for more information:

Tel: 714-532-3355 Toll-Free: 800-245-8748 Fax: 714-532-2238 Email: [email protected]

WARCO BILTRITE has the knowledge, talent and expertise to formulate rubber compounds to meet some of the world’s most stringent specifications. Contact us today to learn how WARCO BILTRITE’s technical and development team can help you meet your specification:


In Need of a Spec Not Listed Here?


Made in USA | Virgin Polymer | No Regrind and No Recycled Materials

Thicknessinches

Widthinches

DurometerHardnessShore A ± 5

2.6 lb1/16 thru 2 36, 48, 72608806 500 200

UltimateElongation

typ. %

Estimated WeightPer Foot

(1/8” x 36”)

Tensiletyp. psi

–20ºF to +170ºF

TemperatureRange

BLACKOUT is a low cost neoprene blended sheet rubber designed for basic applications.Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote

Thicknessinches

Widthinches


Specifications

2.6 lb

2.7 lb

2.7 lb

2.5 lb

2.8 lb

1/32 thru 2

1/32 thru 2

1/32 thru 2

1/16 thru 1

1/32 thru 2

36, 48, 72

36, 48, 72

36, 48, 72

36, 48

36, 48, 72

508015 & 8145

608016 & 8146

708017 & 8147

408014 & 8144

808018 & 8148

800†

900†

1000

800

1000

300

300

200

350

100

UltimateElongation

min. %


(1/8” x 36”)

Tensilemin. psi

ASTM D 2000 1BC 609,SAE J200 1BC 609,MIL-R-3065 SC 609



ASTM D 2000 1BC 408,SAE J200 1BC 408,

MIL-R-3065 SC 408 Z1*


–20ºF to +170ºF

–20ºF to +170ºF

–20ºF to +170ºF

–20ºF to +170ºF

–20ºF to +170ºF

TemperatureRange

*Z1 = Elongation: 350% min† = 1,000 psi Product is Available - Please contact Customer Service for details.

A smooth finish general purpose sheet with low temperature flexibility and oil resistance. Resists

rotting, checking, and cracking due to weather exposure. Designed to meet ASTM specifications for 1 BC Material.Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote

Commercial Neoprene - Style 10


2.6 lb

2.7 lb

2.7 lb

2.8 lb

1/16 thru 1/4

1/16 thru 1/4

1/16 thru 1/4

1/16 thru 1/4

36, 72

36, 72

36

36, 72

508015

608016

708017

808018

800

900

1000

1000

300

300

200

100

ASTM D 2000 1BC 609,SAE J200 1BC 609,MIL R 3065 SC 609




–20ºF to +170ºF

–20ºF to +170ºF

–20ºF to +170ºF

–20ºF to +170ºF

UltimateElongation

min. %


(1/8” x 36”)

Thicknessinches

Widthinches


Specifications

*Supplied Talc-Free

Tensilemin. psi

A commercial blended neoprene sheet with a matte finish on one side. It is free of talc and release

solutions which make it excellent for applications that involve the use of pressure sensitive adhesives (PSA). Finish: Matte Finish on one side, Smooth on reverse side Color: Black Trim: TrimmedNon-Stock Minimum: Please call for quote

Matte Finish Neoprene - Style 12

TemperatureRange


(1/8” x 36”)

Thicknessinches

Widthinches


Specifications

2.46 lb

2.48 lb

2.52 lb

2.45 lb

2.75 lb

1/64 thru 1/2

1/64 thru 1/2

1/64 thru 1/4

1/32 thru 1/4

1/32 thru 1/4

36, 48

36, 48

36, 48

36, 48

36, 48

50050E0357

60060E0264

70070E0321

40040E0423

80080E1109

1000

1000

1000

450

1000

300

300

200

300

100

ASTM D 2000M1BC 607

ASTM D 2000M1BC 707

ASTM D 2000M1BC 507

ASTM D 2000M1BC 403

2.2 lb1/32 thru 1/4 36, 4830030E1084

450 300ASTM D 2000

M1BC 303

ASTM D 2000M1BC 807

UltimateElongation

min. %

Tensilemin. psi

–30ºF to +200ºF

–30ºF to +200ºF

–30ºF to +200ºF

–30ºF to +200ºF

–30ºF to +200ºF

–30ºF to +200ºF

TemperatureRange

A premium grade blended sheet for applications requiring a higher percentage of

Neoprene and wider temperature range than standard commercial grade. This Neoprene formula has great resistance to weathering and moderate resistance to oil and gasoline.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Mid-Grade Neoprene - 5100 Series

WARCO BILTRITE has the knowledge, talent and expertise to formulate rubber compounds to meet some of the world’s most stringent specifications. Contact us today to learn how WARCO BILTRITE’s technical and development team can help you meet your specification:


Can’t Find the Spec You’re Looking For?


Thicknessinches

Widthinches


UltimateElongation

min. %


(1/8” x 36”)Specifications

2.43 lb

2.46 lb

2.54 lb

2.65 lb

2.77 lb

2.79 lb

2.81 lb

1/32 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

1/32 thru 1/4

36, 48

36, 48

36, 48

36, 48

36, 48

36, 48

36, 48

40040E0247

50050E0503

60060E0306

30030E0242

70070E0313

80080E0325

90090E0228

1000

1450

1450

450

1450

1450

1000

400

350

350

300

250

100

100

ASTM D 2000M1BC 303

ASTM D 2000M1BC 407

ASTM D 2000M1BC 510

ASTM D 2000M1BC 610

ASTM D 2000M1BC 710

ASTM D 2000M1BC 810

ASTM D 2000M1BC 907

Tensilemin. psi

–30ºF to +220ºF

–30ºF to +220ºF

–30ºF to +220ºF

–30ºF to +220ºF

–30ºF to +220ºF

–30ºF to +220ºF

–30ºF to +220ºF

TemperatureRange

This product is designed to give maximum performance and service,

resisting degradation from ozone and performing well in contact with oils and many chemicals. Premium Neoprene exhibits integrity over a wide temperature range as well as an outstanding resistance to damage caused by flexing and twisting.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Premium Neoprene (100% Neoprene)

UltimateElongation

min. %


(1/8” x 36”)

Thicknessinches

Widthinches


Specifications

2.98 lb

2.98 lb

60060E1062

55055E1053

1000

800

300

350

2.65 lb1/32 thru 1/4

1/32 thru 1/4

1/32 thru 1/4

40040E1058

600 400FDA ApprovedIngredients per 21 CFR 177.2600

FDA ApprovedIngredients per 21 CFR 177.2600

FDA ApprovedIngredients per21 CFR 177.2600

36, 48

36, 48

36, 48

Tensilemin. psi

This off-white Neoprene material contains FDA approved ingredients per 21 CFR 177.2600, an FDA regulation dealing with rubber articles articles intended for repeated food exposure.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

FDA Neoprene

–30ºF to +220ºF

–30ºF to +220ºF

–30ºF to +220ºF

TemperatureRange

---

---

---

---

---

36 x 3648 x 48

36 x 3648 x 48

36 x 3648 x 48

36 x 3648 x 48

36 x 3648 x 48

UltimateElongation

min. %

Thicknessinches

Sizes*inches


Specifications

5.9 lb

5.88 lb

60060E0915

50050E0914

700

500

250

300

5.4 lb1/8 thru 4

1/8 thru 4

1/8 thru 4

40040E0913

500 350

6.4 lb

6.15 lb

80080E0888

70070E0916

700

700

100

1501/8 thru 4

1/8 thru 4

Tensilemin. psi


(5/16” x 36”)

Available in 36”x36” or 48”x48” - Longer lengths available, please call for quote. Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call for quote

Neoprene Performance Molded Sheets

–30ºF to +200ºF

---36 x 3648 x 48 5.5 lb1/8 thru 420

020E0241500 550 –30ºF to +200ºF

–30ºF to +200ºF

–30ºF to +200ºF

–30ºF to +200ºF

–30ºF to +200ºF

TemperatureRange

*For 30 FT lengths, please see Commercial Neoprene - Style 10.



(1/8” x 36”)

2.53 lb

2.69 lb

2.67 lb

2.45 lb

Thicknessinches

Widthinches


Specifications

–60ºF to +220ºF

–50ºF to +220ºF

–60ºF to +220ºF

–50ºF to +220ºF

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

36, 48

36, 48

36, 48

36, 48

50050E0218

60060E0700

70070E0722

40040E0687

1450

1450

1450

1450

350

350

250

500

ASTM D 2000M2BC 610

A14 B14 C12 E034 F17

ASTM D 2000M2BC 710

A14 B14 C12 E034 F17

ASTM D 2000M2BC 510

A14 B14 C12 E034 F17

ASTM D 2000M2BC 410

A14 B14 C12 E034 F17

UltimateElongation

min. %

TemperatureRange

Tensilemin. psi

ASTM D 2000 M2BC (Neoprene)Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)


(1/8” x 36”)

2.45 lb

2.53 lb

2.69 lb

2.36 lb

2.67 lb

2.78 lb

Thicknessinches

Widthinches


Specifications

–50ºF to +220ºF

–50ºF to +220ºF

–50ºF to +220ºF

–50ºF to +220ºF

–40ºF to +220ºF

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

1/8 thru 4(slabs only)

1/64 thru 1/4

36, 48

36, 48

36, 48

36 x 3648 x 48

36, 48

50050E0785

60060E0700

70070E0711

40040E0687

80080E0702

1300

1500

1500

1200

1600

500

350

300

500

200

MIL-R-6855 Class 2,Grade 30, Type A&B






UltimateElongation

min. %

TemperatureRange

30030E0811

–40ºF to +220ºF1/64 thru 1/4 36, 48 1600 150

Tensilemin. psi

MIL-R-6855 Class 2 (A & B) - Oil Resistant NeopreneFinish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)


(1/8” x 36”)

Thicknessinches

Widthinches


Specifications

–60ºF to +220ºF

–60ºF to +220ºF

–60ºF to +220ºF

–60ºF to +220ºF

–60ºF to +220ºF

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

1/32 thru 1/4

1/64 thru 1/4

36, 48

36, 48

36, 48

36, 48

36, 48

50050E0727

60060E0724

70070E0722

40040E0726

80080E0701

1000

1500

1500

1000

1500

400

350

300

400

250

MIL-R-3065 SC310 F1

MIL-R-3065 SC410 F2

MIL-R-3065 SC515 F2

MIL-R-3065 SC615 F2

MIL-R-3065 SC715 F2

MIL-R-3065 SC815 F1

UltimateElongation

min. %

TemperatureRange

30030E0693

–60ºF to +220ºF1/64 thru 1/4

2.47 lb

2.61 lb

2.65 lb

2.39 lb

2.61 lb

2.61 lb36, 48 1500 100

Tensilemin. psi

MIL-R-3065 SC (Neoprene)Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)



(1/8” x 36”)

2.51 lb

2.45 lb

2.53 lb

Thicknessinches

Widthinches


Specifications

–30ºF to +220ºF

–40ºF to +220ºF

1/64 thru 1/4

1/64 thru 1/4

36, 48

36, 48

50050E0705

50050E0785

1200

1500

300

350AMS 3205

Low Temperature(Neoprene)

AMS 3208Weather Resistant

(Neoprene)

AMS 3215Fuel Resistant

(Nitrile)

UltimateElongation

min. %

TemperatureRange

–30ºF to +220ºF1/64 thru 1/4 36, 4870070P0452

1500 250

Tensilemin. psi

Aerospace Material Specification (AMS)Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

UltimateElongation

min. %

TemperatureRange


(1/8” x 36”)

Thicknessinches

Widthinches


Specifications

2.98 lb

2.98 lb

60060E0969

50**050E0970

1450

1450

350

350

2.44 lb1/32 thru 1/4

1/32 thru 1/4

1/32 thru 1/4

40**040E0737

1000 500

–30ºF to +220ºF

–40ºF to +220ºF

–50ºF to +220ºFASTM D 2000 M2BC 407

A14 B14 C12 F17 Z1*

ASTM D 2000 M2BC 510A14 B14 C12 F17 Z1*

ASTM D 2000 M2BC 610A14 B14 C12 Z1*

36

36

36

Tensilemin. psi

This specially formulated sheet product line prevents the growth of bacteria, fungi, and yeasts while avoiding obstacles that organic

biocides have posed in the past. This product can alleviate cleaning challenges in food-processing, medical, industrial, and other applications prone to microbial growth. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Anti-Microbial Neoprene

*Z1=Fungus resistance per MIL STD 810, Method 508**This material is also available with MIL-R-6855 Class 2 (Grade 40 & Grade 50), MIL STD 810E Method 508.4 specification.

Please contact Customer Service for a quote.


(1/8” x 36”)

Thicknessinches

Widthinches


UltimateElongation

min. %Specifications

2.98 lb1/32 thru 1/4 36, 4865065E1344

1200 300

ASTM E 662, ASTM C 542 (ASTM C 1166 Procedure),Bombardier SMP 800-C*,

Boeing BSS 7239, UL 94VO**

Tensilemin. psi

*Certified by Bodycote Materials Testing Canada, Inc.**This material meets the flame requirement for UL 94VO, but is not UL listed.

Another example of the extensive capabilities of our laboratory. WARCO BILTRITE fire retardant elastomers offer significant benefits for gasketing and noise control inside railcars. The unique formulations of our highly engineered elastomers allow to safely resist the distribution of flame while emitting very low amounts of toxic smoke. This material is designed and formulated to meet the mass transit industry’s most demanding requirements and specifications for smoke generation (ASTM E 662), flame propogation (ASTM C 542), and toxic fume production (SMP 800-C). Rail transit, truck, bus or automotive, WARCO BILTRITE has the material to meet your requirements. Finish: Nylon Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Low Smoke, Low Flame, Low Toxicity Neoprene

–30ºF to +220ºF

TemperatureRange


Thicknessinches

Widthinches


Specifications

2.6 lb

2.7 lb

2.7 lb

2.5 lb

2.8 lb

1/32 thru 1

1/32 thru 1

1/32 thru 1

1/16 thru 1

1/32 thru 1

36, 48

36, 48

36, 48

36, 48

36, 48

508225 & 8355

608226 & 8356

708227 & 8357

408224 & 8354

808228 & 8358

800

900

1000

800

1000

300

200

200

350

100

ASTM D 2000 1BF 609,SAE J200 1BF 609

ASTM D 2000 1BF 710,SAE J200 1BF 710

ASTM D 20001BF 508 Z1,*SAE J200 1BF 508 Z1*

ASTM D 2000 1BF 408 Z1*,SAE J200 1BF 408 Z1*

ASTM D 2000 1BF 810,SAE J200 1BF 810

UltimateElongation

min. %

Tensilemin. psi


(1/8” x 36”)

*Z1 = Meets basic requirements for BF materials. Physical properties are as listed.

A smooth finish blended Nitrile sheet, which is offered in a range of five durometers (40 thru 80 durometer) in order to

perform in a wide variety of applications. Designed to meet ASTM specifications for 1BF material.Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote

Commercial Nitrile - Style 35

–20ºF to +170ºF

–20ºF to +170ºF

–20ºF to +170ºF

–20ºF to +170ºF

–20ºF to +170ºF

TemperatureRange

36, 48

36, 48

36, 48

36, 48

36, 48

36, 48

*1/4” thick 90 durometer material available in slabs only.

Thicknessinches

Widthinches


Specifications

2.32 lb

2.36 lb

2.48 lb

2.22 lb

2.59 lb

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

50050P0266

60060P0187

70070P0135

40040P0179

80080P0206

1000

1450

1450

1000

1450

350

300

250

450

125

ASTM D 2000M1BG 610

ASTM D 2000M1BG 710

ASTM D 2000M1BG 507

ASTM D 2000M1BG 407

ASTM D 2000M1BG 810

2.34 lb1/32 thru 1/4**90090P0270 1450 100

ASTM D 2000M1BG 910

UltimateElongation

min. %

Tensilemin. psi


(1/8” x 36”)

This material is formulated to give excellent fuel and oil resistance and a longer service life in demanding applications.

Finish: Smooth Color: Black Trim: UnTrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Premium Nitrile

–30ºF to +220ºF

–30ºF to +220ºF

–30ºF to +220ºF

–30ºF to +220ºF

–30ºF to +220ºF

–30ºF to +220ºF

TemperatureRange

Thicknessinches

Widthinches


UltimateElongation

min. %SpecificationsTensile

min. psi

1/16 thru 1/4


(1/8” x 36”)

2.8 lb36, 48 1000 350ASTM D 2000 1BG 610,


Style 37 is specially formulated for its whiteness, used in food,phamaceutical, and cosmetic processing. Made from FDA-approved ingredients

per 21CFR 177.2600, it is non-marking, non-allergenic, and safe to use for repeated food exposure. It has good oil and abrasion resistance and handles oily and greasy food products well. This product conforms with 3-A Sanitary 18-03 requirements for multiple use rubber Class III and Class IV. Finish: Smooth Color: White Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote

FDA Nitrile - Style 37

608035

–25ºF to +180ºF

TemperatureRange


ThicknessInches

WidthInches


UltimateElongation


2.71 lb

2.75 lb

2.95 lb

3.31 lb

1/32 thru 1/2

1/32 thru 1/2

1/32 thru 1/2

1/32 thru 1/4

36, 48

36, 48

36, 48

36, 48

55055P0146

65065P0364

80080P0100

45045P0152

1000

1000

450

450

250

200

100

300ASTM D 2000 M1BG 503 Z1 Z2 Z3,*

FDA approved ingredientsper 21 CFR 177.2600

ASTM D 2000 M1BG 607 Z1 Z2 Z3,*FDA approved ingredients

per 21 CFR 177.2600

ASTM D 2000 M1BG 707 Z1 Z2 Z3,*FDA approved ingredients

per 21 CFR 177.2600

ASTM D 2000 M1BG 803 Z1 Z2*,*FDA approved ingredients

per 21 CFR 177.2600

*Z1 = ± 5 Durometer, Z2 = FDA Ingredients per 21 CFR 177.2600, Z3 = White in Color **Z1 = FDA Ingredients per 21 CFR 177.2600, Z2 = White in Color

WARCO WHITE® is a registered trademark of West American Rubber Company, LLC. All rights reserved.

Tensilemin. psi


(1/8” x 36”)

As its name implies, this material is specially formulated for its whiteness and is used extensively in food and pharmaceutical

environments. It is formulated with FDA-approved ingredients. It is non-toxic, non-marking and non-allergenic. It exhibits good abrasion resistance and handles oily and greasy food products well. All materials are made with FDA approved ingredients per 21 CFR 177.2600 and are intended for repeated food exposure. Finish: Smooth Color: White Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

WARCO White® FDA Nitrile

–30ºF to +220ºF

–30ºF to +220ºF

–30ºF to +220ºF

–30ºF to +220ºF

TemperatureRange


(1/8” x 36”)

2.38 lb

2.42 lb

2.5 lb

2.15 lb

2.46 lb

Thicknessinches

Widthinches


Specifications

–50ºF to +220ºF

–50ºF to +220ºF

–50ºF to +220ºF

–50ºF to +220ºF

–50ºF to +220ºF

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

36, 48

36, 48

36, 48

36, 48

36, 48

50050P0472

60060P0473

70070P0474

80080P0475

1200

1300

1400

1100

1600

350

300

200

450

150

MIL-R-6855Class 1 Grade 40





UltimateElongation

min. %

TemperatureRange

40040P0471

Tensilemin. psi

MIL-R-6855 Class 1 (Fuel Resistant Nitrile)Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)


(1/8” x 36”)

2.22 lb

2.28 lb

2.35 lb

2.22 lb

2.45 lb

Thicknessinches

Widthinches


Specifications

–60ºF to +220ºF

–60ºF to +220ºF

–60ºF to +220ºF

–60ºF to +220ºF

–40ºF to +220ºF

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

36, 48

36, 48

36, 48

36, 48

36, 48

50050P0468

60060P0461

70070P0444

40040P0477

80080P0475

1500

1500

1500

1000

1500

400

300

250

450

125

MIL-R-3065 SB410 F2

MIL-R-3065 SB515 F2

MIL-R-3065 SB615 F2

MIL-R-3065 SB715 F2

MIL-R-3065 SB815 F1

UltimateElongation

min. %

TemperatureRange

Tensilemin. psi

MIL-R-3065 SB (Nitrile)Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)



(1/8” x 36”)

2.22 lb

2.41 lb

2.41 lb

2.14 lb

Thicknessinches

Widthinches


Specifications

–40ºF to +220ºF

–40ºF to +220ºF

–40ºF to +220ºF

–40ºF to +220ºF

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

36, 48

36, 48

36, 48

36, 48

50050P0683

60060P0450

70070P0627

40040P0626

1000

1450

1450

1000

350

300

250

450

ASTM D 2000M5BG 610

A14 B14 E014 E034 F17

ASTM D 2000M5BG 710

A14 B14 E014 E034 F17

ASTM D 2000M5BG 507

A14 B14 E014 E034 F17

ASTM D 2000M5BG 407

A14 B14 E014 E034 F17

UltimateElongation

min. %

TemperatureRange

Tensilemin. psi

ASTM D 2000 M5BG (Nitrile)

Estimated WeightPer Linear Foot

(1/8” x 36”)

2.13 lb

2.67 lb

Thicknessinches

Widthinches


Specifications

–30ºF to +200ºF1/64 thru 1/4 36, 4850050E0189

1000 300MIL-G-1149 Type 1Class 1 Grade 50

(Neoprene)

UltimateElongation

min. %

TemperatureRange

–40ºF to +180ºF1/64 thru 1/4 36, 4850050A0172


(SBR)

2.32 lb–40ºF to +200ºF1/64 thru 1/4 36, 4850050P0447


(Nitrile)

Tensilemin. psi

MIL-G-1149Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

A Nitrile material designed specifically for the transformer oil market; helping to dissipate the likelihood of high electrostatic charging tendencies. These

highly engineered materials, in addition to meeting their respective ASTM D 2000 line call-outs, meet industry specification GE A12C11E7. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Thicknessinches

WidthInches


UltimateElongation


2.36 lb

2.42 lb

1/32 thru 1/2

1/32 thru 1/2

36, 48

36, 4870070P0807

60060P0996

2000

2000

250

300

ASTM D 20005BG 620 A14 B14 E034;

General Electric A12C11E7

ASTM D 20005BG 720 A14 B14 E034;

General Electric A12C11E7

Tensilemin. psi


(1/8” x 36”)

Transformer Oil Nitrile

–20ºF to +250ºF

–30ºF to +250ºF

TemperatureRange

2.24 lb


(1/8” x 36”)

Thicknessinches

Widthinches


SpecificationsUltimate

Elongationmin. %

TemperatureRange

Tensilemin. psi

–50ºF to +220ºF1/64 thru 1/4 36, 4840040P0445

1000 300 MIL-R-2765

MIL-R-2765 (Nitrile)Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)


Thicknessinches

Widthinches


UltimateElongation

min. %Features

2.39 lb

2.4 lb

1/32 thru 1/2

1/32 thru 1/2

36, 48

36, 4870070P1042

60060P0678

1500

1500

250

300Compatible with

Bio-Diesel B20 & B100

Compatible withBio-Diesel B20 & B100

Tensilemin. psi


(1/8” x 36”)

Specially designed and developed for use in environments where alternative fuels are present. Immersion test results indicate that these materials are compatible with alternative

fuels and are suitable for Bio-Diesel B20 (20% Bio-Diesel and 80% Petroleum Diesel) & Bio-Diesel B100 (100% Bio-Diesel).Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Bio-Diesel Nitrile

–30ºF to +220ºF

–30ºF to +220ºF

TemperatureRange

Thicknessinches

Widthinches


Specifications

3.5 lb1/32 thru 1/4 36, 48, 72 758010 400 150

ASTM D 1330 Grade 2,ASTM D 2000 1AA 704 Z1

(Z1 = 75 ± 5 Durometer)

UltimateElongation

min. %

Tensilemin. psi


(1/8” x 36”)

An economical red sheet for use in low pressure applications with no oil resistant requirements.

100 lb (half) rolls are also available. Please call for quote.Finish: Smooth (Also available in fabric finish) Color: Red (Also available in Black) Trim: TrimmedNon-Stock Minimum: Please call 1-800-245-8748 for quote

Red Rubber SBR - Style 20

–20ºF to +170ºF

TemperatureRange

UltimateElongation

%

Thicknessinches

Widthinches


Specifications

2.7 lb1/16 thru 1/4758008

700 150 ASTM D 1330 Grade 136

Tensilepsi


(1/8” x 36”)

Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote

Premium SBR - Style 22

–20ºF to +170ºF

TemperatureRange

Thicknessinches

Widthinches


Specifications

3.0 lb1/16 thru 1/4 36, 4875075A0370

450 150ASTM D 2000M1AA 703 Z1

(Z1 = 75 ± 5 Durometer)

UltimateElongation

min. %

Tensilemin. psi


(1/8” x 36”)

A premium grade SBR sheet with a high tensile strength. Well suited for the heating and plumbing trades. Has good aging, abrasion and tear

resistant properties. Refer to physical properties and ASTM data in assessing suitability for intended applications. Finish: Smooth Color: Red (Also available in Black) Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Specification Grade SBR

–40ºF to +180ºF

TemperatureRange


UltimateElongation

min. %

Thicknessinches

Widthinches


Specifications

1.9 lb1/16 thru 1408031 & 8131

3000 600

ASTM D 2000 1AA 430,SAE J200 1AA 430,


36, 48

Tensilemin. psi


(1/8” x 36”)

Excellent physical properties such as superior resilience, tensile, elongation, and abrasion resistance. Style 28 is a tan floating stock

and is produced entirely with FDA approved ingredients. It has good tear strength and is resistant to water most salts, mild acids and other chemicals. Not suited for environments involving ozone, strong acids, animal fats, oils, greases and most hydrocarbons. Non-marking and safe to use for repeated food exposure. Finish: Smooth Color: Tan Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote

Natural Rubber - Style 28

–20ºF to +140ºF

TemperatureRange

UltimateElongation

min. %

Thicknessinches

Widthinches


Specifications

2.28 lb

2.07 lb

60060R0134

50050R0566

2500

2500

400

400

1.91 lb1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

40040R0246 2500 500

ASTM D 2000M1AA 417

ASTM D 2000M1AA 517

ASTM D 2000M1AA 617

36, 48

36, 48

36, 48

Tensilemin. psi


(1/8” x 36”)

In addition to our Tan Natural Rubber - Style 28, our Black Natural Rubber exhibits extremely good resiliency and abrasion resistance. It has good tear

strength and is resistant to water, most salts and mild acids.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Black Natural Rubber

–40ºF to +160ºF

–40ºF to +160ºF

–40ºF to +160ºF

TemperatureRange

UltimateElongation*

min. %

ThicknessInches

WidthInches


Specifications

1.91 lb1/16 thru 1/240040R0149

2500 500ASTM D 2000 M1AA 417,

FDA Approved IngredientsPER 21CFR 177.2600

36, 48

Tensile*min. psi


(1/8” x 36”)

Light Tan Pure Gum Floating stock has superior resilience, tensile, elongation and abrasion

resistance properties. Light Tan Natural Rubber is produced entirely with FDA approved ingredients per 21 CFR 177.2600. It has good tear strength and is resistant to water, most salts, mild acids, and many other chemicals. Not suited for environments involving ozone, strong acids, animal fats, oils, greases, and most hydrocarbons. Non-marking and safe to use for repeated food exposure.Finish: Smooth Color: Light Tan (Also available in Black) Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Pure Gum Floating Natural Rubber

–40ºF to +160ºF

TemperatureRange


UltimateElongation

min. %

Thicknessinches

Widthinches


Specifications

2.19 lb1/64 thru 1/440040R0579

2500 500ASTM D 2000 M1AA 417,

FDA approved ingredientsper 21 CFR 177.2600

36, 48

Tensilemin. psi


(1/8” x 36”)

Superior resilience, tensile, elongation and abrasion resistance properties. It has good tear strength and is resistant to water, most salts, mild acids, and many other chemicals. Made with FDA approved ingredients per 21 CFR 177.2600. Finish: Smooth Color: Dark Tan Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

EZ Cut Non-Floating Gum Natural Rubber

–40ºF to +160ºF

TemperatureRange

UltimateElongation

min. %

Thicknessinches

Widthinches


Specifications

1.91 lb1/64 thru 1/440040R0526

2500 500ASTM D 2000 M1AA 417,

FDA approved ingredientsper 21CFR 177.2600

36, 48

This material does not contain protein, which may cause alergic reactions.

Tensilemin. psi


(1/8” x 36”)

This offering represents a synthetic polyisoprene which does not contain protein, which can cause allergic reactions in some cases. All materials are made with FDA approved ingredients per 21 CFR 177.2600.Finish: Smooth Color: Light Tan Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Protein Free (Synthetic Polyisoprene) Natural Rubber

–40ºF to +160ºF

TemperatureRange

UltimateElongation

min. %

Thicknessinches

Widthinches


Specifications

1.93 lb1/8 thru 240040R0573

2500 500ASTM D 2000

M4AA 421 F17 G2136, 48

Tensilemin. psi


(1/8” x 36”)

Tuff-Stuff® Natural Rubber is an outstanding abrasion resistant material. Tuff-Stuff® delivers an optimum combination of tear,

abrasion, noise, and impact resistance resulting in reduced maintenance costs and longer service life from capital equipment. Tuff-Stuff® and Tuff-Stuff Plus® have each been specifically formulated and field proven to deliver the ultimate in durability and long life for high production mineral and aggregate facilities. Tear Resistance (Die C) = 200 PPI. Finish: Smooth Color: Red Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Tuff-Stuff® Natural Rubber

–40ºF to +160ºF

TemperatureRange

Thicknessinches

Widthinches


2.5 lb

2.6 lb

1/16 thru 1/4

1/16 thru 1/4

36, 48

36, 48

508058

608060

800

800

300

250

UltimateElongation

min. %

Tensilemin. psi


(1/8” x 36”)

ASTM D 2000 3BA 508 C12,SAE J200 3BA 508 C12,MIL-R-3065 RS 508 C1


Specifications

Our most economical EPDM sheet offered. Intended to be used in less critical applications where temperatures are of an intermittent nature.Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote

Commercial EPDM - Style 40

–40ºF to +212ºF

2.7 lb1/16 thru 1/4 36, 48708061 800 150


–40ºF to +212ºF

–40ºF to +212ºF

TemperatureRange


Thicknessinches

Widthinches


Specifications

2.2 lb

2.2 lb

2.2 lb

2.2 lb

1/16 thru 1/4

1/16 thru 1/4

1/16 thru 1/4

1/16 thru 1/4

36, 48

36, 48

36, 48

36, 48508054

608053

708051

808052

1500

1500

1500

1500

350

250

150

400

ASTM D 2000 3BA 515A14 B13 C12 F17,SAE J200 3BA 515A14 B13 C12 F17,

MIL-R-3065 RS 515 C1 F1


MIL-R-3065 RS 615 C1 F1


MIL-R-3065 RS 715 C1 F1


MIL-R-3065 RS 815 C1 F1

UltimateElongation

min. %

Tensilemin. psi


(1/8” x 36”)

High Grade EPDM is suited for applications where a high performance rating is required. It exhibits excellent resistance to heat, ozone and sunlight and has good temperature flexibility.Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote

Premium EPDM - Style 45

–40ºF to +225ºF

–40ºF to +225ºF

–40ºF to +225ºF

–40ºF to +225ºF

TemperatureRange

ThicknessInches

WidthInches


Specifications

2.2 lb

2.22 lb

2.28 lb

2.03 lb

2.28 lb

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

36, 48

36, 48

36, 48

36, 48

36, 48

50050K0042

60060K0020

70070K0052

40040K0038

80080K0036

1015

1015

1015

1015

1450

300

300

200

300

150

ASTM D 2000M2BA 407 C12 F17

ASTM D 2000M2BA 507 C12 F17

ASTM D 2000M2BA 607 C12 F17

ASTM D 2000M2BA 707 C12 F17

ASTM D 2000M2BA 810 C12 F17

UltimateElongation

min. %

Tensilemin. psi


(1/8” x 36”)

An EPDM best suited for applications where a high performance rating is required.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Premium EPDM

–50ºF to +220ºF

–50ºF to +220ºF

–50ºF to +220ºF

–50ºF to +220ºF

–50ºF to +220ºF

TemperatureRange


UltimateElongation

min. %

Thicknessinches

Widthinches


Specifications

2.15 lb

2.2 lb

2.32 lb

2.1 lb

60060K0190

70070K0186

80080K0386

50050K0474

1450

1450

1450

1450

250

200

150

300

2.13 lb1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

40040K0175

1450 500 ASTM D 2000 M4CA 410A25 B35 C32 EA14 F19

ASTM D 2000 M4CA 510A25 B35 C32 EA14 F19

ASTM D 2000 M4CA 610A25 B35 C32 EA14 F19

ASTM D 2000 M4CA 710A25 B35 C32 EA14 F19

ASTM D 2000 M4CA 810A25 B35 C32 EA14 F19

36, 48

36, 48

36, 48

36, 48

36, 48

Tensilemin. psi


(1/8” x 36”)

Peroxide cured EPDM provides exceptional heat and aging stability and better compression set performance at higher temperatures. Most peroxides do not bloom and have better color control and stability.

Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Peroxide Cure EPDM

–60ºF to +300ºF

–60ºF to +300ºF

–60ºF to +300ºF

–60ºF to +300ºF

–60ºF to +300ºF

TemperatureRange


(1/8” x 36”)

Thicknessinches

Widthinches



Elongationmin. %

TemperatureRange

Tensilemin. psi

2.3 lb–40ºF to +220ºF1/64 thru 1/4 36, 4885085K0104

1600 70 MIL-R-21252

MIL-R-21252 (EPDM)Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

MIL-R-83285 Grade 80 (EPDM)Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

2.32 lb


(1/8” x 36”)

Thicknessinches

Widthinches



Elongationmin. %

TemperatureRange

Tensilemin. psi

–60ºF to +300ºF1/64 thru 1/4 36, 4880080K0386 2000 150 MIL-R-83285 Grade 80

Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

2.1 lb


(1/8” x 36”)

Thicknessinches

Widthinches



Elongationmin. %

TemperatureRange

Tensilemin. psi

–40ºF to +180ºF1/64 thru 1/4 36, 4845045K0438

1000 300 MIL-R-900

MIL-R-900 (EPDM)



(1/8” x 36”)

2.08 lb

2.14 lb

2.2 lb

2.1 lb

Thicknessinches

Widthinches


Specifications

–60ºF to +300ºF

–60ºF to +300ºF

–60ºF to +300ºF

–60ºF to +300ºF

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

1/64 thru 1/4

36, 48

36, 48

36, 48

36, 48

50050K0336

60060K0190

70070K0186

40040K0175

1450

1450

1450

1450

400

350

250

400

ASTM D 2000M4AA 610

A13 B13 C12 F17

ASTM D 2000M4AA 710

A13 B13 C12 F17

ASTM D 2000M4AA 510

A13 B13 C12 F17

ASTM D 2000M4AA 407

A13 B13 C12 F17

UltimateElongation

min. %

TemperatureRange

Tensilemin. psi

ASTM D 2000 M4AA (EPDM)Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

UltimateElongation

min. %

Thicknessinches

Widthinches


Features

3.3 lb1/8 thru 1658055

1500 300 Good abrasion andtear resistance

48

Tensilemin. psi


(1/8” x 36”)

A commercial blended SBR compound used to control wear on surfaces impacted by solid materials and slurries.Good abrasion and tear resistance. Protects surfaces such as chutes, skirtboards, impact areas, and tumblers. This product is also available in extruded 50 FT straight lengths. May also be customized with beveled or chamfered edges. Please call for dimensions and a quote.Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote

Skirtboard & Chute Lining - Style 25

–20ºF to +170ºF

TemperatureRange

UltimateElongation

min. %

Thicknessinches

Widthinches


Weight Per Foot

(1/2” x 36”)Specification

12.2 lb

16 lb

708067

608066

2250

2250

300

350

15.8 lb1/4 thru 1

1/4 thru 1

1/4 thru 1

508065

2250 400 AASHTO Grade 2*Neoprene

AASHTO Grade 2*Neoprene

AASHTO Grade 2*Neoprene

Tensilemin. psi

48

48

48

Available in lengths up to 30’. Longer lengths available, please call for quote. Also available in 36” x 36” and 48” x 48” slabs.Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote

AASHTO Unsupported Neoprene Bearing Pads - Style 71

Certain states specify requirements other than standard AASHTO specifications. When ordering, identify all requirements or submit individual state specifications. Above meets the Standard Specifications for Highway Bridges, adopted by the American Association of State Highway and Transportation Officials, Sixteenth Edition 1993, Section M251-92, Level 1.*Other AASHTO grades are available. Please contact customer service for details.

–40ºF to +220ºF

–40ºF to +220ºF

–40ºF to +220ºF

TemperatureRange


UltimateElongation

min. %

Thicknessinches


Weight Per Foot


12.2 lb

12 lb

708095

608093

2250

2250

300

400

11.8 lb1/4 thru 1

1/4 thru 1

1/4 thru 1

508091

2250 450AASHTO Grade 2*

Natural Rubber

AASHTO Grade 2*Natural Rubber

AASHTO Grade 2*Natural Rubber

Tensilemin. psi

Widthinches

48

48

48

Certain states specify requirements other than standard AASHTO specifications. When ordering, identify all requirements or submit individual state specifications. Above meets the Standard Specifications for Highway Bridges, adopted by the American Associa-tion of State Highway & Transportation Officials, Sixteenth Edition 1993, Section M251-92, Level 1.*Other AASHTO grades are available. Please contact customer service for details.

Natural Rubber Unsupported AASHTO Bearing Pads are available in Grade 2 (other grades also available) in lengths up to 30 feet. Longer lengths available, please call for quote. Also available in 36” x 36” and 48” x 48” slabs. Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote

AASHTO Unsupported Natural Rubber Bearing Pads - Style 72

–40ºF to +160ºF

–40ºF to +160ºF

–40ºF to +160ºF

TemperatureRange

UltimateElongation

min. %

Thicknessinches

Widthinches


Estimated Weight Per Foot


2.60 lb

2.56 lb

70070E0056

60060E0054

2250

2250

300

350

2.54 lb1/8 thru 1/2

1/8 thru 1/2

1/8 thru 1/2

50050E0052

2250 400 AASHTO Grade 3Neoprene

AASHTO Grade 3Neoprene


Tensilemin. psi

36, 48

36, 48

36, 48

Also available in 36” x 36” and 48” x 48” slabs. Thickness Tolerance: 1.25” thick or less = +0.125“/-0 Width Tolerance: 36” width = +0.25”/-0, 48” width = +0.5”/-0 Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

AASHTO Unsupported Calendered Neoprene Bearing Pads


–40ºF to +220ºF

–40ºF to +220ºF

TemperatureRange

–40ºF to +220ºF

UltimateElongation

min. %

Thicknessinches

Sizeinches


Estimated Weight Per Foot


10.39 lb

10.31 lb

70070E0869

60060E0986

2250

2250

300

350

10.15 lb1/4 thru 1

1/4 thru 1

1/4 thru 1

50050E0979

2250 400 AASHTO Grade 3Neoprene



Tensilemin. psi

36x3648x48

36x3648x48

36x3648x48

Also available in 36” and 48” width rolls. Thickness Tolerance: 1.25” thick or less = +0.125“/-0 Width Tolerance: 36” width = +0.25”/-0, 48” width = +0.5”/-0 Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call for quote

AASHTO Unsupported Molded Neoprene Bearing Pads


–40ºF to +220ºF

–40ºF to +220ºF

–40ºF to +220ºF

TemperatureRange


Thicknessinches

SheetWidthinches


3.68 lb 060F02071/64 - 1/4 36, 4860 800 1200

Tensile (psi) Estimated WeightPer Foot

(1/8” x 36”)

–20ºF to +400ºF

TemperatureRange Compound

minimum typical

250 350

3.65 lb 075F02331/64 - 1/4 36, 4870 900 1200 –20ºF to +400ºF200 300

3.65 lb 075F02051/64 - 1/4 36, 4875 1000 1250 –20ºF to +400ºF200 300

UltimateElongation (%)

minimum typical

Fluorozone® Premium Performance FKM sheet is made with 100% virgin domestic-made premium 3M™ Dyneon™ Fluoroelastomer polymer. With 66% Fluorine content, Fluorozone® Premium Performance FKM is comparable to A-type Fluoroelastomer products. This material exhibits resistance to a broad range of oils, fuels, lubricants and most mineral acids. Fluorozone® has very good resistance to many aliphatic hydrocarbon fluids that can dissolve many other types of rubber.

Finish: Smooth (Nylon finish available, upcharge will apply) Color: Black Trim: Untrimmed

FluorozonePremium Performance FKM

Tensile & Elongation physicals are presented in minimum and typical values - we certify to minimum value.

®

Thicknessinches

SheetWidthinches


4.40 lb 075F02171/64 - 1/4 36, 4875 1000 1200

Tensile (psi) Estimated WeightPer Foot

(1/8” x 36”)

–20ºF to +400ºF

TemperatureRange Compound

minimum typical

175 200


minimum typical

Fluorozone® Brown Premium Performance FKM sheet is made with 100% virgin USA-made premium 3M™ Dyneon™ Fluoroelastomer polymer (formerly known as Fluorel™). Fluorozone® Brown Premium Performance FKM exhibits resistance to a broad range of oils, fuels, lubricants and most mineral acids. Fluorozone® has very good resistance to many aliphatic hydrocarbon fluids that can dissolve many other types of rubber.

Finish: Smooth (Nylon finish available, upcharge will apply) Color: Brown Trim: Untrimmed


®FluorozoneBrown Premium Performance FKM

Fluorozone® Mil-Spec Performance FKM sheet is formulated to meet the AMS 3216 specification (supercedes MIL-R-83248) and is made with 100% virgin domestic-made premium 3M™ Dyneon™ Fluoroelastomer polymer (formerly known as Fluorel™). Fluorozone Mil-Spec Performance FKM is our second offering in the Fluorozone® FKM product family. This material exhibits a higher temperature range and increased tensile strength compared to our Fluorozone Premium Performance grade. Fluorozone has very good resistance to many aliphatic hydrocarbon fluids that can dissolve many other types of rubber and has resistance to a broad range of oils, fuels, lubricants and most mineral acids.


FluorozoneMil-Spec Performance FKM


®

Thicknessinches

SheetWidthinches


3.55 lbAMS 3216G,

MIL-R-83248C Type II Class 11/32 - 1/4 36, 4875075F0212

1600 1850

Tensile (psi)Estimated

WeightPer Foot

(1/8” x 36”)

–20ºF to +500ºF

TemperatureRange Specifications

minimum typical

125 150


minimum typical


Formulated for food and lab applications where FDA compliance is required. Made from FDA-approved ingredients per 21CFR 177.2600 including 100% virgin domestic-made premium 3M™ Dyneon™ Fluoroelastomer polymer (formerly known as Fluorel™). With 66% Fluorine content, this material exhibits resistance to a broad range of oils, fuels, lubricants and most mineral acids. It has very good resistance to many aliphatic hydrocarbon fluids that act as solvents for many other rubbers.


FluorozoneFDA Performance FKM


®

Thicknessinches

SheetWidthinches


3.76 lb FDA 21 CFR 177.2600

FDA 21 CFR 177.2600

1/32 - 1/4 36, 4860060F0221

800 1200

Tensile (psi)Estimated

WeightPer Foot

(1/8” x 36”)

–20ºF to +450ºF

TemperatureRange Compliance

minimum typical

200 250

3.92 lb1/32 - 1/4 36, 4875075F0223

800 1300 –20ºF to +450ºF150 200


minimum typical

Features

66% Fluorine,Cinnamon Scented,

100% Viton® FKM

Thicknessinches

Widthinches


UltimateElongation

min. %

3.7 lb1/32 thru 1/4 36, 4870070F0074

800 175

Tensilemin. psi


(1/8” x 36”)

This material exhibits a broad range of resistance to oils, fuels, lubricants and most mineral acids. It has very good resistance to many aliphatic hydrocarbon fluids that act as solvents for many other rubbers. Exceptionally good compression set attributes even at temperatures that can embrittle other non-fluorinated elastomers. It also exhibits good resistance to atmospheric oxidation, sun, and weather, and has excellent resistance to fungus and mold. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: Please call for minimums and availability.

Commercial Viton® A

–20ºF to +400ºF

3.7 lb1/32 thru 1/4 36, 4875075F2124

1000 175 –20ºF to +400ºF

TemperatureRange

Features

100% DuPont Viton® FKM

Thicknessinches

Widthinches


UltimateElongation

min. %

4.4 lb1/32 thru 1/4 36, 4875075F0123

1000 175

Tensilemin. psi


(1/8” x 36”)

This material exhibits a broad range of resistance to oils, fuels, lubricants and most mineral acids. It has very good resistance to many aliphatic hydrocarbon fluids that act as solvents for many other rubbers. Exceptionally good compression set attributes even at temperatures that can embrittle other non-fluorinated elastomers. It also exhibits good resistance to atmospheric oxidation, sun, and weather, and has excellent resistance to fungus and mold. Finish: Smooth Color: Brown Trim: UntrimmedNon-Stock Minimum: Please call for minimums and availability.

Brown Commercial Viton® A

–20ºF to +400ºF

TemperatureRange

Viton™ and any associated logo is a trademark or copyright of THE CHEMOURS COMPANY FC, LLC used under license by West American Rubber Company, LLC.


Viton™ and any associated logo is a trademark or copyright of THE CHEMOURS COMPANY FC, LLC used under license by West American Rubber Company, LLC.

Thicknessinches

Widthinches


UltimateElongation


3.79 lb

3.58 lb

1/16 - 1/4

1/32 - 1/4

36, 48

36, 4870070F0052

60060F0053

1000

1000

175

200 ASTM D 2000M1HK 607

ASTM D 2000M1HK 707

3.61 lb1/32 - 1/4 36, 4880080F0054

1000 150 ASTM D 2000M1HK 807

Tensilemin. psi


(1/8” x 36”)

A broad range of resistance to oils, fuels, lubricants and most mineral acids. Very good resistance to many aliphatic hydrocarbon fluids that

act as solvents for many other rubbers. Exceptionally good compression set resistance; even at temperatures that can degradate other non-fluorinated elastomers. Good resistance to atmospheric oxidation, sun, and weather. Excellent resistance to fungus and mold. 66% fluorine content.Finish: Smooth Color: Black Trim: UntrimmedNon-Stock Minimum: Please call for minimums and availability.

Premium Viton® A

–20ºF to +450ºF

–20ºF to +450ºF

–20ºF to +450ºF

TemperatureRange

Thicknessinches

Widthinches


UltimateElongation


3.63 lb1/64 thru 1/4 36, 4875075F0081

1600 125AMS 3216G,

MIL-R-83248C Type II Class 1

Tensilemin. psi


(1/8” x 36”)

Mil-Spec Viton® A

–20ºF to +500ºF

TemperatureRange

A broad range of resistance to oils, fuels, lubricants and most mineral acids. Excellent resistance to hot greases found in engines and compressors and excellent resistance to a wide range of concentrated acids. Made with 66% fluorine content. This material is approved under the Government’s Q.P.L. 83248-3.Finish: Smooth Color: Black Trim: UntrimmedNon-Stock Minimum: Please call for minimums and availability.

Thicknessinches

Widthinches


UltimateElongation


3.75 lb1/32 - 1/4 36, 4870070F0195

1000 175ASTM D 2000

M1HK 707

3.81 lb1/32 - 1/4 36, 4875075F0165

1000 150ASTM D 2000M1HK 807 Z*

Tensilemin. psi


(1/8” x 36”)

Viton® B has greater res istance and retains flexibility better after dry heat aging than Viton® A. It is recommended for applications requiring maximum retention of elastic

properties combined with good mechanical properties. Viton® B offers superior resistance to both diluted and concentrated aggressive acids. Finish: Smooth Color: Black Trim: UntrimmedNon-Stock Minimum:Please call for minimums and availability.

Viton® B

–20ºF to +450ºF

–20ºF to +450ºF

TemperatureRange

*Z = 75 ± 5 Durometer

ThicknessInches

WidthInches


UltimateElongation


3.63 lb1/64 thru 1/4 36, 4875075F0151

700 150FDA approvedingredients per21 CFR 177.2600

Tensilemin. psi


(1/8” x 36”)

Perfect for food and lab applications where FDA compliance is required. This material has good chemical resistance, high temperature properties and is

resistant to corrosives. Safe to use for repeated food exposure.Finish: Smooth Color: Black Trim: UntrimmedNon-Stock Minimum: Please call for minimums and availability.

FDA Viton® A

–20ºF to +450ºF

TemperatureRange


Thicknessinches

Widthinches


Tensiletypical psi

Features

2.46 lb

2.63 lb

2.59 lb

2.36 lb

--- lb

1/32 thru 1/4

1/32 thru 1/4

1/32 thru 1/4

1/32 thru 1/4

1/32 thru 1/4

36, 48

36, 48

36, 48

36, 48

36, 48

50050S0843

60060S0844

70070S0845

40040S0842

80080S0846

750

800

800

750

800

400

350

300

450

200

High and LowTemperature Resistance,

Excellent WeatheringResistance

UltimateElongation

min. %

WARCO BILTRITE’s commercial grade silicone sheet is designed to be used in applications where physical properties are not critical but extreme temperature (high or low) resistance is still needed. This material also provides excellent UV and ozone resistance. It is non-toxic, chemically inert and fungus resistant. Finish: Smooth Color: Red (Also available in Black, White, & Gray) Trim: UntrimmedNon-Stock Minimum: Please call for minimums and availability.


(1/8” x 36”)

–80ºF to +450ºF

–80ºF to +450ºF

–80ºF to +450ºF

–80ºF to +450ºF

–80ºF to +450ºF

TemperatureRange

Performance Silicone

T M

Thicknessinches

Widthinches


Tensile (psi) Speci�cations

2.42 lb

2.57 lb

2.59 lb

2.36 lb

A-A-59588 2A & 2B Grade 50,AMS 3302, ASTM D2000 M1GE 505




1/32 thru 1/4

1/32 thru 1/4

1/32 thru 1/4

1/32 thru 1/4

36, 48

36, 48

36, 48

36, 48

50050S0562

60060S0563

70070S0564

40040S0561

820

820

900

800

725

725

725

725


INFINISIL™ Spec-Grade Performance Silicone is designed to be used in applications where higher physical properties and lower compression set are required. It is resistant to extreme high and low temperature ranges and is proven to be an excellent gasketing material. Meets the A-A-59588 speci�cation which supercedes ZZ-R-765.Finish: Smooth Color: Red (Also available in Black, White, & Gray) Trim: UntrimmedNon-Stock Minimum: Please call for minimums and availability.


(1/8” x 36”)

–80ºF to +450ºF

–80ºF to +450ºF

–80ºF to +450ºF

–80ºF to +450ºF

TemperatureRange

Spec-Grade Performance Silicone

T M

min. typical

300

320

280

400

250

200

150

300

min. typical


This Silicone material is designed for applications where food or consumables are present. FDA Silicone is low volatile, peroxide-free and does not discolor over time. The ingredients used to make this product are listed in CFR 177.2600, an FDA regulation dealing with rubber articles that are intended for repeated food exposure. This material is ozone and UV resistant.Finish: Smooth Color: Red (Also available in Black, White, & Gray) Trim: UntrimmedNon-Stock Minimum: Please call for minimums and availability.

FDA Performance Silicone

T M

36, 48

36, 48

36, 48

36, 48

36, 48

Thicknessinches


Tensilemin. psi

Specifications

2.54 lb

2.67 lb

2.75 lb

2.18 lb

2.77 lb

1/32 thru 1/4

1/32 thru 1/4

1/32 thru 1/4

1/32 thru 1/4

1/32 thru 1/4

50050S1091

60060S1092

70070S1093

40040S1090

80080S1094

450

450

450

450

450

250

200

150

300

100

FDA approved ingredients

per 21 CFR 177.2600

UltimateElongation

min. %

Widthinches


(1/8” x 36”)

–80ºF to +400ºF

–80ºF to +400ºF

–80ºF to +400ºF

–80ºF to +400ºF

–80ºF to +400ºF

TemperatureRange


Butyl (also known as Isobutylene-isoprene) is impermeable to air and used in many applications requiring airtight rubber. Butyl rubber has outstanding resistance to gases, vapors, heat aging, oxygen, ozone, sunlight, abrasion and

tearing. It has excellent resistance to alkalis and acids and is good for electrical insulation.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Tensilemin. psi

Thicknessinches

Widthinches


Specifications

2.2 lb

2.24 lb

2.3 lb

2.09 lb

1/32 thru 1/4

1/32 thru 1/4

1/32 thru 1/4

1/32 thru 1/4

36, 48

36, 48

36, 48

36, 48

50050T0055

60060T0056

70070T0080

40040T0083

1000

1000

1450

1000

400

300

250

400

ASTM D 2000M1AA 607

ASTM D 2000M1AA 710

ASTM D 2000M1AA 507

ASTM D 2000M1AA 407

UltimateElongation

min. %


(1/8” x 36”)

Butyl

–40ºF to +180ºF

–40ºF to +180ºF

–40ºF to +180ºF

–40ºF to +180ºF

TemperatureRange

UltimateElongation*

min. %

Cotton1/16 thru 1/4 36, 4870*070E1162

800* 150*

Thicknessinches

Widthinches

DurometerHardness*Shore A ± 5

FabricType

Tensile*min. psi

*Physicals are based on rubber only (no insert).Durometer and tensile strength of the above material is calculated with the respective material inserted into the sheet.This construction includes one Cotton ply for each 1/16” thickness: 1/16 - 3/32 = 1 ply 1/8” = 2 plies 3/16” = 3 plies 1/4” = 4 plies

Cloth reinforcement enhances dimensional stability in flanged gasket applications with high compression loads. This construction includes one ply of cotton fabric for each 1/16” thickness.Temperature Range: –30ºF to +200ºF Finish: Smooth Color: Black Trim: Untrimmed Fabric Type: CottonNon-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Features

Cotton-InsertedSheet

Cloth-Inserted Neoprene - Regular Cotton Ply


(1/8” x 36”)

2.41 lb

UltimateElongation*

min. %

Polyester4.0 oz1/16 thru 1/4 36, 4870*070E1028

800* 150*

Thicknessinches

Widthinches


FabricType

FabricWeight

Tensile*min. psi

*Physicals are based on rubber only (no insert).Durometer and tensile strength of the above material is calculated with the respective material inserted into the sheet.This construction includes one ply for each 1/16” thickness: 1/16 - 3/32 = 1 ply 1/8” = 2 plies 3/16” = 3 plies 1/4” = 4 plies

Cloth reinforcement enhances dimensional stability in flanged gasket applications with high compression loads. This construction includes one ply of polyester fabric for each 1/16” thickness.Temperature Range: –30ºF to +200ºF Finish: Smooth Color: Black Trim: Untrimmed Fabric Type: PolyesterNon-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Features

Polyester-InsertedSheet

Cloth-Inserted Neoprene - Regular Polyester Ply


(1/8” x 36”)

2.34 lb


UltimateElongation*

min. %

Cotton1/16 thru 1/4 36, 4865*065A0447

1300* 300*

Thicknessinches

Widthinches


FabricType

–30ºF to +170ºF*

TemperatureRange*

Tensile*min. psi

*Physicals are based on rubber only (no insert).This construction includes one ply for each 1/16” thickness: 1/16 - 3/32 = 1 ply 1/8” = 2 plies 3/16” = 3 plies 1/4” = 4 plies

Cloth reinforcement enhances dimensional stability in flanged gasket applications with high compression loads. Suitable for use in air, hot water, low pressure steam, and hydraulic services. An SBR compound reinforced with a close weave cotton fabric. This construction includes one ply of cotton fabric for each 1/16” thickness.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Features


Cloth-Inserted SBR - Regular Cotton Ply


(1/8” x 36”)

2.75 lb

UltimateElongation*

min. %

4.0 ozPolyester1/16 thru 1/4 36, 4865*

065A04461300* 300*

Thicknessinches

Widthinches


FabricType

Tensile*min. psi

*Physicals are based on rubber only (no insert).This construction includes one ply for each 1/16” thickness: 1/16 - 3/32 = 1 ply 1/8” = 2 plies 3/16” = 3 plies 1/4” = 4 plies

Cloth reinforcement enhances dimensional stability in flanged gasket applications with high compression loads. Suitable for use in air, hot water, low pressure steam, and hydraulic services. An SBR compound reinforced with a close weave polyester. This construction includes one ply of polyester fabric for each 1/16” thickness.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Features


Cloth-Inserted SBR - Regular Polyester Ply


(1/8” x 36”)

2.74 lb–30ºF to +170ºF*

TemperatureRange*

UltimateElongation*

min. %

Cotton1/8 thru 1/4 36, 4865*065A0447

1300* 300*

Thicknessinches

Widthinches


FabricType

Tensile*min. psi

*Physicals are based on rubber only (no insert).This construction includes the following fabric content per thickness: 1/8“ = 1 ply 3/16” = 2 plies 1/4” = 3 plies

Like Regular Ply CI Sheet, reduced ply CI sheet addresses the need for dimensional stability in applications with high compression loads. Cotton fabric content per thickness is one ply for 1/8”, two plies for 3/16”, and three plies for 1/4”.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Features


Cloth-Inserted SBR - Reduced Cotton Ply


(1/8” x 36”)

2.75 lb–30ºF to +170ºF

TemperatureRange

UltimateElongation*

min. %

4.0 ozPolyester1/8 thru 1/4 36, 4865*

065A04461300* 300*

Thicknessinches

Widthinches


FabricType

Tensile*min. psi

*Physicals are based on rubber only (no insert).This construction includes the following fabric content per thickness: 1/8“ = 1 ply 3/16” = 2 plies 1/4” = 3 plies

Like Regular Ply CI Sheet, reduced ply CI sheet addresses the need for dimensional stability in applications with high compression loads. Polyester fabric content per thickness is one ply for 1/8”, two plies for 3/16”, and three plies for 1/4”.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Features


Cloth-Inserted SBR - Reduced Polyester Ply


(1/8” x 36”)

2.74 lb–30ºF to +170ºF

TemperatureRange


Estimated WeightPer Linear Foot

(1/8” x 36”)

Thicknessinches

Widthinches


OilResistance

2.23 lb

2.40 lb

2.73 lb

1/16 thru 1/4

1/16 thru 1/4

1/16 thru 1/4

36, 48

36, 48

36, 48

50050A0425

50050P1016

60060E1395

1500

1500

1500

250

250

250

High

n/a

Medium

2.23 lb1/16

thru 1/436, 4850

050A0425

Class

3

4

2

1 1500 250 n/a

UltimateElongation*

min. %

Tensile*min. psi

SBR

Nitrile

Neoprene

SBR

Polymer

10.8 oz

10.8 oz

10.8 oz

10.8 oz

FabricWeightper sq yd

-40ºF to +220ºF

-40ºF to +200ºF

-40ºF to +250ºF

-40ºF to +200ºF

TemperatureRange

*Physicals are based on rubber only (no insert).This construction includes one 10.8 oz (per sq yd) cotton ply for each 1/16” thickness:1/16” = 1 ply; 1/8” = 2 ply; 3/16” = 3 ply; 1/4” = 4 ply

Designed for ventilating systems and for flange joints for water or brine systems to

withstand 250 pounds of pressure. A typical application is a flange gasket in which the compression loads are so high that non-reinforced rubber would squeeze or extrude out between the flanges.Finish: Smooth Color: Black Trim: Untrimmed Fabric Type: CottonNon-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

HHP-151F Cloth-Inserted (CI) Sheet

A family of both soft and hard, black, versatile thermoplastic. This material combines good

physical properties and chemical resistance for use in a wide range of applications. Specified for its performance properties in a variety of industries: major appliances, caster wheels, mass transit, safety & protection, marine and industrial machinery. Finish: Smooth Color: Black Trim: Trimmed Minimum: Please call for quote

Thicknessinches

Widthinches

DurometerHardness

Shore ± 5

DurometerType

UltimateElongation*

%Specifications

1.27 lb

1.27 lb

1.27 lb

1.27 lb

1.27 lb

1.27 lb

1.27 lb

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

24

24

24

24

24

24

24

64101M0064

73101M0073

80101M0080

55101M0055

87101M0087

40103M0040

50103M0050

A

A

A

A

A

D

D

1000

1200

1600

640

2300

2750

4000

440

375

450

330

550

600

600

MSAR20A

Tensile*psi


(1/8” x 24”)

General Purpose Grade TPE - Black

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

TemperatureRange

*Typical Values


SpecificationsDaimlerChrysler, Ford Worldwide, General Motors

MSAR20C, WSD-M2D380-A1,

GMP.E/P.003

MSAR20D, WSD-M2D381-A1,

GMP.E/P.004

MSAR20E, WSD-M2D382-A1,

GMP.E/P.005

MSAR30A, WSD-M2D441-A,

GMP.E/P.006

MSAR30B, WSD-M2D712-A1,

GMP.E/P.007

MSAR20B, WSD-M2D379-A1,

GMP.E/P.002

A family of soft, as well as hard, colorable, versatile thermoplastic. This material

combines good physical properties and chemical resistance for use in a wide range of applications. Finish: Smooth Color: Neutral Trim: Trimmed Minimum: Please call for quote

Thicknessinches

Widthinches

DurometerHardness

Shore ± 5

DurometerType

UltimateElongation*

%

1.27 lb

1.27 lb

1.27 lb

1.27 lb

1.27 lb

1.27 lb

1.27 lb

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

24

24

24

24

24

24

24

64201M0064

73201M0073

80201M0080

55201M0055

87201M0087

40203M0040

50203M0050

A

A

A

A

A

D

D

1000

1200

1600

640

2300

2750

4000

440

375

450

330

550

600

600

- - - - -

Tensile*psi


(1/8” x 24”)

General Purpose Grade TPE - Neutral

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

TemperatureRange

*Typical Values

Santoprene™ 241-55 TPE is manufactured by

Exxon Mobil and compliant with NSF/ANSI 51 & 61 for plumbing applications in contact with potable water and food processing equipment. Complies with FDA regulations for rubber articles intended for repeated use, as well as those in contact with non-fatty, non-oily foods as closures and sealing gaskets. Made in the USA.Finish: Smooth Color: Neutral Trim: Trimmed Minimum: Please call for quote

SpecificationsThicknessinches

Widthinches

DurometerHardness

Shore ± 5

DurometerType

UltimateElongation*

%

1.27 lb

1.27 lb

1.27 lb

1.27 lb

1.27 lb

1.27 lb

1.27 lb

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

24

24

24

24

24

24

24

64241M0064

73241M0073

80241M0080

55241M0055

87241M0087

40243M0040

50243M0050

A

A

A

A

A

D

D

1000

1200

1600

640

2300

2750

2700

440

460

500

330

500

550

550

Tensile*psi


(1/8” x 24”)

NSF/ANSI 51 & 61Compliant

Santoprene™ 241-55 TPE (NSF Compliant)

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

TemperatureRange

*Typical Values


MSAR40A

MSAR40B

A hard, colorable, flame retardant material. It exhibits good fluid resistance and contains non-ether brominated flame retardants

(non-furan emitting). It does not contain added antioxidants or metal deactivators.Finish: Smooth Color: Neutral Trim: Trimmed Minimum: Please call for quote

Thicknessinches

Widthinches

DurometerHardness

Shore ± 5

DurometerType

UltimateElongation*

%Specifications

1.27 lb

1.27 lb

1.27 lb

1.27 lb

1.27 lb

Tensile*psi


(1/8” x 24”)

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

24

24

24

24

24

85251M0085

92251M0092

36253M0036

80251M0080

50253M0050

A

A

D

A

D

1480

2020

1700

1050

3720

445

530

490

410

660

Flame Retardant Grade TPE

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

TemperatureRange

*Typical Values


per 21 CFR 177.2600

TPEs (thermoplastic elastomers) have the properties and performance of rubber, but are

processed like plastic. It has excellent clarity & superior colorability, and very good heat resistance. It was designed for applications where FDA compliance, clarity & enhanced heat resistance are required. Safe to use for repeated food exposure. Finish: Smooth Color: Black Trim: Trimmed Minimum: Please call for quote

Thicknessinches

Widthinches

DurometerHardness

Shore ± 5

DurometerType

UltimateElongation*

%Features

1.27 lb

1.27 lb

1.27 lb

Tensile*psi


(1/8” x 24”)

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

24

24

24

64171M0064

73171M0073

55171M0055

A

A

A

1000

1200

640

440

460

330

FDA Approved Grade TPE - Black

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

TemperatureRange

*Typical Values

TPEs (thermoplastic elastomers) have the properties and performance of rubber, but are

processed like plastic. It has excellent clarity & superior colorability, and very good heat resistance. It was designed for applications where FDA compliance, clarity & enhanced heat resistance are required. Safe to use for repeated food exposure. Finish: Smooth Color: Neutral Trim: Trimmed Minimum: Please call for quote

ThicknessInches

WidthInches

DurometerHardness

Shore ± 5

DurometerType

UltimateElongation*

%Specifications

1.27 lb

1.27 lb

1.27 lb

1.27 lb

1.27 lb

1.27 lb

1.27 lb

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

0.02 thru 0.25

24

24

24

24

24

24

24

64271M0064

73271M0073

80271M0080

55271M0055

87271M0087

40273M0040

50273M0050

A

A

A

A

A

D

D

1000

1200

1600

640

2300

2750

4000

440

460

500

330

500

550

550


per 21 CFR 177.2600

Tensile*psi


(1/8” x 24”)

FDA Approved Grade TPE - Neutral

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

–50ºF to +275ºF

TemperatureRange

*Typical Values


Approximate WeightPer Foot(12” x 36”)

Thicknessinches

Widthinches

Color SurfaceTexture Specifications

Corrugated1/8BlackHalf = 75 feetFull = 150 feet 2.1 lb ASTM D 2000 1AA 70624, 36, 48, 72

ApproximateRoll Length

Corrugated MattingMost widely used where floor protection and safety are vitally important. Applications include general use in industry, home and office for heavy traffic areas, aisles, hard floor surfaces or as anti-fatigue matting. Use thicker mattingfor extra heavy duty service. Product strengths include extended wear, all-weather, strong sound absorption characteristics, cleanability and wearresistance. Will not curl, shrink, or separate. This product can be easily beveled and perforated for entry mat use.Finish: Corrugated Texture Color: Black Trim: Trimmed Non-Stock Minimum: Please call for quote

24, 36, 48, 72

Corrugated3/16Black 75 feet 3.7 lb36, 48, 72

Corrugated1/4Black75 feet

72” = 36 feet 5 lb

Corrugated3/8Black 18 feet 7.4 lb

ASTM D 2000 1AA 706

ASTM D 2000 1AA 706

ASTM D 2000 1AA 70672


Thicknessinches

Widthinches

Color SurfaceTexture Specifications

Corrugated1/4Black 75 feet 5 lb*ASTM D 178-93Type 1 Class 224, 36, 48

ApproximateRoll Length

*Conforms to OSHA Regulations. Ref. 29 CFR 1920.137 & 29 CFR 1910.309(b)

ASTM Switchboard Type 1 MattingExpressly designed to protect against electrical shock when working around high voltage apparatus such as fuse boxes, control panels, and electrical machinery, when used as specified by ASTM D178-93, as amended. Proof tested at 20,000 volts AC. Maximum recommended use voltage is 17,000 volts. Dielectric strength 30,000 volts AC. Permanently branded. Please refer to specifications for additional information. Finish: Corrugated Texture Color: Black Trim: Trimmed



Thicknessinches

Widthinches

Color SurfaceTexture

Non-Directional,Textured Finish0.08Black

Half = 75 feetFull = 150 feet 1.6 lb ASTM D 2000 1AA 70436, 48

ApproximateRoll Length Specifications

KleenRite® MattingKleenRite® matting is ideally suited for tool box lining, utility vehicles, step stools and a myriad of other applications. Finish: KleenRite Texture Color: Black Trim: Trimmed

FingerTrac Entrance MatsStop dirt at the door with WARCO BILTRITE's FingerTrac Entrance Mats.WARCO BILTRITE provides high quality FingerTrac Rubber Entrance Mats made in the USA designed to maintain cleanliness and to help protect and extend flooring life. Perfectly suited for outdoor or indoor entrances and specifically designed to clean and scrape shoe soles of any dirt, sand, grit, mud and snow - eliminating ugly tracking problems in office buildings, retail establishments and homes, resulting in reduced costs on floor and carpet maintenance issues.

All weather high performance mat

Designed with thousands of flexible tapered vertical rubber fingers that scrape shoe soles clean and a thicker base that provides more flexing and longer wear

Contains 30% more fingers and is 25% heavier on average than the imports

Full 1/8" fingerbed thickness

Beveled edges on all four sides enhance safety while trapping dirt and other elements

Easy to clean

Utilize the FingerTrac superior construction by placing at workstations as anti-fatigue mats

Tredair Anti-Fatigue Comfort MatsThe ultimate in comfort with honeycombed air cells providing resilience while creating long-lasting foot and leg comfort that decreases back fatigue. Greater comfort translates into increased productivity and wellness. Interlocking and beveled edge design allows flexibility to form any length. Black in Color


UltimateElongation

min. %

Inner DiameterRangeinches

Wall ThicknessRangeinches


Specifications

1/16 thru 560060E0055

1500 300Mil-R-6855 Class 2

Type A/B Grade 601/32 thru 1

Tensilemin. psi

Protects wires and cables from abrasion, corrosion and the elements. Designed to fit loose or be blown on to wire bundles for a tight fit. WARCO BILTRITE carries compound in stock for a shorter production lead time.Color: Black Purchase Minimum: $500.00 per line item

Neoprene Cable Jacket Tubing to Mil-R-6855 Class 2 Type A/B Grade 60

–50ºF to +220ºF

TemperatureRange

Catalog Pricing is available on the following pages for the Wall Thicknesses below:

3/32”Wall

1/32”Wall

5/32”Wall

3/64”Wall

3/16”Wall

1/16”Wall

1/8”Wall

UltimateElongation

min. %

Inner DiameterRangeinches

Wall ThicknessRangeinches


Specifications

1/16 thru 560060E0713

1500 300

Anti-Fungal Per Mil-Std-8.10,ASTM G21, Mil-Std-454 Req 4,

Mil-R-6855 Class 2Type A/B Grade 60

1/32 thru 1

Tensilemin. psi

WARCO BILTRITE’s 60 Durometer Neoprene Tubing is Anti-Fungal per Mil-Std-8.10 and is designed to meet the Mil-R-6855 Class 2 specification. Compression Set = 50% max. Material is supplied unmarked. For markings, please contact us.Color: Black Stock-Item Purchase Minimum: 10 Feet Non-Stock Purchase Minimum: Please call for quote

60 Durometer Neoprene Tubing

–50ºF to +220ºF

TemperatureRange

1/2”(± 0.016)

9/16”(± 0.017)

5/8”(± 0.018)

1/4”(± 0.010)

5/16”(± 0.011)

3/8”(± 0.013)

21/32”(± 0.019)

3/4”(± 0.021)

DurometerHardness

(Shore A ± 5)

Inn

er

Dia

me

ter

(in

ch

es)

60 Duro060E0713

The following sizes are stock items:

5/8” ID(± 0.018)

1/16” Wall(± 0.009)

3/8” ID(± 0.013)

1/16” Wall(± 0.009)

5/16” ID(± 0.011)

1/16” Wall(± 0.009)

1/4” ID(± 0.010)

1/16” Wall(± 0.009)

1/2” ID(± 0.016)

1/16” Wall(± 0.009)

9/16” ID(± 0.017)

1/16” Wall(± 0.009)

21/32” ID(± 0.019)

1/16” Wall(± 0.009)

3/4” ID(± 0.021)

1/16” Wall(± 0.009)

Please contact us for stencilling, other dimensions, profiles or polymers and for orders over $500.00Call 714-532-3355 or email [email protected]

$1.2831265092

$1.45

$1.6331265094

$1.76

$2.16

$0.75

$0.90

$0.97

(± 0.009)Wall

Thickness

1/16”

31265091

31265093

31267794

Prices are per foot ($/ft). $10.00 Min.

= Regularly Stocked Items.

31267792

31267793

31265095


Rubber Waterstop has been used extensively on projects throughout the United States and the world. Beginning with projects designed to meet the U.S. Army Corps. of Engineers’ and the U.S. Bureau of Reclamation’s specifications, Rubber

Waterstop usage has expanded to all types of concrete structures for the purpose of keeping liquids in or out. SBR Rubber is used primarily for water containment, while Neoprene Rubber is used generally for projects involving sewage, water treatment, and chemical environments. Waterstops are also available in other polymers such as EPDM, Nitrile, Silicone, and Natural Rubber. WARCO BILTRITE maintain Waterstop compounds that meet the U.S. Army Corps of Engineers’ CRD-C-513-71 specification and Caltrans 51-2.04 specification. Other compounds can be provided to meet other national and international specifications in accordance with project requirements. Non-specification commercial grade Rubber Waterstop is also available. Please contact us for details.

Rubber Waterstop

Tensile Strength PSI (min)

Tensile Strength @ 300% Modulus (PSI min)

Ultimate Elongation, (% min)

Durometer, Shore A (+/- 5)

Water Absorption, 2 Days at 70C % Weight Change (% max)Compression Set, 22 hrs. @ 70C % of original deflection (max)Accelerated Aging, 96 hrs. @70C % of Tensile Strength before aging (min) % of Elongation before aging (min)Ozone Resistance, 7 Days at 50 PPHM @ 38C, 20 % Elongation

ASTM TestMethods

SBR(Styrene Butadien)

NaturalRubber

High TensileNeoprene*

D412

D412

D412

D2240

D471

D395(Method B)

D573D573

D1149

3000

1150

450

65

5

30

8080

no cracks

3500

1450

500

65

5

30

8080

no cracks

2500

1150

450

65

5

40

8080

no cracks

*Provides Maximum Resistance to Ozone, Sewage, Oil, and Solvents

Physical Properties Chart of Various Polymers

Thicknessinches

Widthinches


Specifications

2.56 lb1/8 thru 1/2 36, 4855055E0507

2000 300 Caltrans 51-2.04Waterstops

UltimateElongation

min. %

Tensilemin. psi


(1/8” x 36”)

Finish: Smooth Color: Black

Caltrans Strip Waterstop

–40ºF to +220ºF

TemperatureRange

Single piece molded construction ensures exceptional strength and stretch resiliency. The special EPDM compound used in the construction of WARCO BILTRITE Utility Straps is suited for high oxidation and weather resistance without cracking. An assortment of lengths including 6 in, 10 in, 15 in, 15 in, 21 in, 31 in are available.

Utility Tarp Straps


The profiles below are normally provided in SBR and Neoprene compounds as required. Waterstop is usually provided in 50 ft. lengths, but can be manufactured in longer and shorter lengths to minimize field splicing. Special profiles and compounds can be provided to meet specific project requirements. WARCO BILTRITE Rubber Waterstop is also available in non-spec commercial grade.

Waterstop Extruded Profile Chart

ProfilesNormal Size

(Width x Thickness x Bulb O.D.) PolymerWeight Per

100 Feet

Neoprene

SBR

Neoprene

SBR

Neoprene

SBR

Neoprene

SBR

160 lb

130 lb

230 lb

190 lb

125 lb

105 lb

300 lb

250 lb

Dumbbell Type 6” x 3/8” x 3/4” end bulbs

152.4mm x 9.5mm x 19mm end bulbs

Dumbbell Type 9” x 3/8“ x 3/4” end bulbs

228.6mm x 9.5mm x 19mm end bulbs

Center Bulb Type 6” x 1/4“ x 5/8” end bulbs (1 1/8” center bulb)

152.4mm x 6.3mm x 15.9mm end bulbs (28.6mm center bulb)

Center Bulb Type 9” x 3/8“ x 1” end bulbs (1 1/2” center bulb)

228.6mm x 9.5mm x 25.4mm end bulbs (38mm center bulb)

Utilize the Molded Waterstop Intersections below in conjunction with WARCO BILTRITE’s Extruded Waterstop profiles above to create custom systems that fit a multitude of applications.

C 6” DBU C 9” DBU C 6” DBCBU C 9” DBCBU

C 6” DBFC C 9” DBFC C 6” DBCBFC C 9” DBCBFC

C 6” DBFT C 9” DBFT C 6” DBCBFT C 9” DBCBFT

C 6” DBFE C 9” DBFE C 6” DBCBFE C 9” DBCBFE

C 6” DBVE C 9” DBVE C 6” DBCBVE C 9” DBCBVE

C 6” DBVT C 9” DBVT C 6” DBCBVT C 9” DBCBVT

Flat Cross

Flat Tee

Flat Ell

Vertical Tee

Vertical Ell

Union

TYPE6“ 9“ 6“ 9“

Waterstop Molded Intersections


Notes


Table of Contents

General Production Information

Specification Index

Neoprene SheetBLACKOUT Commercial NeopreneCommercial Neoprene - Style 10Matte Finish Neoprene - Style 12Mid-Grade Neoprene - 5100 SeriesPremium Neoprene (100% Neoprene)FDA NeopreneNeoprene Performance Molded SheetsASTM D 2000 M2BC (Neoprene)MIL-R-6855 Class 2 (A&B) - Oil Resistant NeopreneMIL-R-3065 SC (Neoprene)Aerospace Material Specification (Neoprene/Nitrile)Anti-Microbial NeopreneLow Smoke, Low Flame, Low Toxicity Neoprene

Nitrile (Buna-N) SheetCommercial Nitrile - Style 35Premium NitrileFDA Nitrile - Style 37WARCO White® FDA NitrileMIL-R-6855 Class 1 (Fuel Resistant Nitrile)MIL-R-3065 SB (Nitrile)ASTM D 2000 M5BG (Nitrile)MIL-G-1149 (Neoprene/SBR/Nitrile)MIL-R-2765 (Nitrile)Transformer Oil MaterialBio-Diesel Nitrile

SBR SheetRed Rubber SBR - Style 20Specification Grade SBRPremium SBR - Style 22

Natural Rubber SheetNatural Rubber - Style 28Black Natural RubberPure Gum FloatingEZ Cut Non-Floating GumProtein Free (Synthetic Polyisoprene)Tuff-Stuff®

EPDM SheetCommercial EPDM - Style 40Premium EPDM - Style 45Premium EPDMPeroxide Cure EPDMMIL-R-21252 (EPDM)MIL-R-83285 GR80 (EPDM)MIL-R-900 (EPDM)ASTM D 2000 M4AA (EPDM)

Skirtboard & Chute Lining

AASHTO Bearing PadsAASHTO Unsupported Neoprene

Bearing Pads - Style 71AASHTO Unsupported Natural Rubber

Bearing Pads - Style 72AASHTO Unsupported Calendered Neoprene

Bearing PadsAASHTO Unsupported Molded Neoprene

Bearing Pads

Viton® & Fluoroelastomer SheetFluorozone® Premium Performance FKMFluorozone® Brown Premium Performance FKMFluorozone® Mil-Spec Performance FKMFluorozone® FDA Performance FKMCommercial Viton™ ABrown Commercial Viton™ APremium Viton™ AMil-Spec Viton™ APremium Viton™ BFDA Viton™ A

Silicone SheetINFINISIL™ Performance SiliconeINFINISIL™ Spec-Grade Performance SiliconeINFINISIL™FDA Performance Silicone

Butyl Sheet

Cloth-Inserted (CI) SheetCloth-Inserted Neoprene - Regular Cotton PlyCloth-Inserted Neoprene - Regular Polyester PlyCloth-Inserted SBR - Regular Cotton PlyCloth-Inserted SBR - Regular Polyester PlyCloth-Inserted SBR - Reduced Cotton PlyCloth-Inserted SBR - Reduced Polyester PlyHHP-151F Cloth-Inserted Sheet

Thermoplastic Elastomer SheetGeneral Purpose Grade TPE - BlackGeneral Purpose Grade TPE - NeutralSantoprene™ 241-55 TPEFlame Retardant Grade TPEFDA Approved Grade TPE (Black)FDA Approved Grade TPE (Neutral)

Rubber Mats & MattingCorrugated MattingASTM Switchboard Type 1 MattingKleenRite® MattingFingerTrac® Entrance MatsTredair® Comfort Mats

Rubber Extrus60 Durometer Neoprene TubingNeoprene Cable Jacket Tubing to MIL-R-6855

Utility Tarp Straps

Rubber Waterstop

TERMS AND CONDITIONS OF SALE

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

. . . . . . . . . . . . . . . . . . . . 3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5. . . . . . . . . . . . . . . . . . 5

. . . . . . . . . . . . . . . . . . . . 5

. . . . . . . . . . . . . . . . . . . . 6. . . . . . . . . . . . . . . . . . 6

. . . . . . . . . . . . . . 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

. . . . . . . . . . . . . . . 7. . . . . . . . . . . . . . . . . . . . 8

. . . . . . 8. . . . . . . . . . . . . . . . . . . . . . . . . 8

. . . . 9. . . . . . . . . . . . . . . . . . . . . . . . . . 9

. . . . . . . . 9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10. . . . . . . . . . . . . . . . . . . . . . 10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

. . . . . . . . . . . . . . . . . . . . . . . 11. . . . . . . . . . . . 11

. . . . . . . . . . . . . . . . . . . . . . . . . . . 11. . . . . . . . . . . . . . . . . . . . . . 12

. . . . . . . . . . . . . . . . . 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

. . . . . . . . . . . . . . . . . . . . . . . . . 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13. . . . . . . . . . . . . . . . . . . . . . . . 13

. . . . . . . . . . . . . . . . . . . . . . . . . . 13

. . . . . . . . . . . . . . . . . . . . . . . . . . 13

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14. . . . . . . . . . . . . . . . . . . . . . . . . 14

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

. . . . . . . . . . . . . . . . . . . . . . . . 15. . . . . . . . . . . . . . . 15

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15. . . . . . . . . . . . . . . . . . . . . . 15

. . . . . . . . . . . . . . . . . . . . . . . . . 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17. . . . . . . . . . . . . . . . . . . . . . . . 17

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17. . . . . . . . . . . . . . . . . . . . . . 18

. . . . . . . . . . . . . . . . . . . . . . . . 18

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

. . . . . . . . . . . . . . . . . . . . . . . . . 18

. . . . . . . . . . . . . . . . . . . . . . . . . 19

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

. . . . . . . . . . . . . . . . . . . 20. . . . . . . . . . . . 20

. . . . . . 20. . . . . . . . . . . . 20

. . . . . . . . . . . . . . . . 21. . . . . . . . . . . . . . . . . . . . . . . . . . . 21

. . . . . . . . . . . . . . . . . . . . . . 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23. . . . . . . . . . . . . . . . . . . 23

. . . . . . . . . 23. . . . . . . . . . . . . . . 24

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

. . . . . . . . . . . . . . . . . . . . . . . . . . 25. . . . . . . . 25

. . . . . . 25. . . . . . . . . . . . . 26

. . . . . . . . . . . 26. . . . . . . . . . . . 26

. . . . . . . . . . . 26. . . . . . . . . . . . . . . . . . . . 27

. . . . . . . . . . . . . . . . . . . . 27. . . . . . . . . . . . . . . . . 27

. . . . . . . . . . . . . . . 28. . . . . . . . . . . . . . . . . . . . . . . . . 28

. . . . . . . . . . . . . . . . . . . . . . . 29. . . . . . . . . . . . . . . . . . . 29

. . . . . . . . . . . . . . . . . 29

. . . . . . . . . . . . . . . . . . . . . . . . . . . 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

. . . . . . . . . . . . . . . . . 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

. . . . . . . . . . . . . . . . . . . . . . . . 31. . . . . . . . . . . . . . . . . . . . . . . . . . . 31

ions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32. . . . . . . . . . . . . . . . . . . 32

. . . . . . . . 32

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

. . . . . . . . . . . . . . . . . 37

For more information, please visit us at warco.com


WARCO BILTRITE products are sold commercially for multiple applications as determined by the end-user. Information on certain physical properties of our various styles and grades is provided in our product literature, but such information is unrelated to any particular use or application. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. Consultation with qualified engineers and testing laboratories is recommended. WARCO BILTRITE does not recommend any of its products for any particular use or application. The purchaser or user shall assume full responsibility for the adequacy and suitability for the intended use. Rubber products may fail as a result of temperature variances, excessive pressures, abrasion or damaging substances. The wear life of rubber products is limited by the circumstances and conditions of use. Rubber materials should be inspected regularly and should be replaced as appropriate for operational and safety requirements and the prevention of injury or damage to persons and property.Our rubber products, except where indicated, are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named polymer is not necessarily the polymer representing the highest percentage of the polymer blend. The various specification call outs are a valuable guide in selecting the type and grade of sheet rubber for a particular application. In any application, the customer should evaluate the performance requirements and conditions that will affect the working life of the rubber product. Field should be performed before the type of rubber is selected. If the customer’s quality assurance incorporates the testing of rubber material, the test criteria should include the physical property call outs of the specifications that are most critical to its application. Polymer type alone may not be adequate for the selecting of the rubber that is best suited for a specific application.ASTM basic requirements for physical properties are based on values obtained from standard laboratory test specimens prepared and tested in accordance with the applicable ASTM test methods. Test results from specimens prepared from finished products may not duplicate values obtained from standard test specimens. Per ASTM D2000, Section 7.1, Buyer agrees that when standard test specimens are cut from finished parts in accordance with Practice D 3183, a deviation to the extent of 10% on tensile strength and elongation values is permissible.Unless stated otherwise, products are manufactured to meet standard RMA Commercial guidelines. Per RMA, roll goods may contain multiple pieces. 1. PAYMENTS: Seller may require full or partial payment in advance at any time if in its sole judgment, the financial condition of the Buyer does not justify the terms of paymentspecified herein. A charge of 1-1/2 percent (1-1/2%) per month (or at the highest ratepermitted by law) shall be payable on all overdue accounts. Orders will not be processeduntil payment terms are approved by Seller’s Credit Department.2. PRICES SUBJECT TO CHANGE: Seller may change any price, shipment or freight term in effect at any time and from time to time by giving Buyer at least fifteen (15) days written notice thereof. Buyer’s failure to give Seller a written objection to any such change withinten (10) days after receipt of notice shall constitute acceptance of such change. Whereobjection is made, Seller shall advise Buyer within ten (10) days thereafter whether Sellerwill (a) continue to deliver at the price or on the terms in effect prior to the announcedchange, or (b) cancel this contract. Any cancellation shall be effective upon Buyer’s receipt of Seller’s notice and shall be without further obligation of either party to the other except to perform or pay all obligations accrued through date of cancellation. Provided however, that in the case of non-stock items ordered specifically for Buyer’s use, Seller reserves the right to increase prices to cover the increases in its costs arising from increases in the cost ofmaterials or labor rates which become effective between the date of this acknowledgment and the date of shipment. In such event, this Agreement shall remain in effect at the priceadjusted to reflect said increases.3. MINIMUM PURCHASE: Stock sheet Item = One roll minimum.

Non-stock sheet and Custom items = Please request quote.4. TAXES: Buyer shall reimburse Seller for all taxes, excises or other charges which Seller may be required to pay to any governmental entity (national, state or local) upon the sales, production or transportation of the goods sold hereunder.5. DELIVERY: Unless otherwise specified herein, goods will be delivered F.O.B. point ofshipment, freight allowed on specified pounds. Seller will determine the point of origin ofshipment, the method of transportation, and the routing of shipment. Partial deliveries shall be accepted by the Buyer and paid for at the prices and terms hereunder. Seller does notguarantee any delivery or completion date. In the event of delay in delivery of goods, Seller shall not be liable or responsible for any loss, damage, expense or charge of any kind,direct or indirect, suffered or incurred by Buyer as a result of such delay.6. TITLE AND RISK OF LOSS: Title and risk of loss in the goods shall pass to Buyer upon Seller’s delivery to carrier at the shipping point, notwithstanding the terms of shipmentspecified herein.7. WARRANTIES AND DISCLAIMERS: Goods furnished under this Agreement shallconform to the description herein. All first quality goods are warranted to be free fromdefects in material and workmanship at the time of shipment. Seller shall convey good title to buyer. Seller further warrants that the goods sold hereunder do not infringe any validUnited States patent, but Seller does not warrant, however, that the use of the goods orproducts made therefrom, either alone or in conjunction with other materials, will notinfringe any valid United States patent. THE WARRANTIES SET FORTH IN THISPROVISION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIESEXPRESSED OR IMPLIED, INCLUDING WARRANTIES ARISING FROM COURSE OFDEALING OR USAGE OF TRADE. SELLER MAKES NO WARRANTY, EXPRESSED ORIMPLIED, OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.ALL PRODUCTS ARE SOLD AND WARRANTED ONLY PURSUANT TO OURPUBLISHED TERMS AND CONDITIONS OF SALE. WE ARE NOT RESPONSIBLE TOTHE USER FOR ANY CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGESRESULTING FROM PRODUCT USE OR PROCESSING.8. CLAIM PERIOD AND REMEDIES: Prompt written notice shall be given to Seller of any claim of failure of goods to conform to the warranties hereunder. Should any failure toconform to these warranties appear under normal and proper use within the period of one (1) year from the date of shipment to the Buyer, Seller shall correct such nonconformity, at its option, by repair or replacement of the defective goods, or by the refund of the purchase price thereof with due allowance made for the service rendered by the goods returned. Inno event shall Buyer commence any action under this Agreement later than one year after receipt of the goods. The remedies provided above are the Buyer’s sole remedies for anyfailure of Seller to comply with its obligations. Correction of any non-conformity by repair or replacement or by refund of the purchase price of the nonconforming goods (less allowance for use) shall constitute fulfillment of all obligations of Seller with respect thereto, whether the claims of Buyer are based in contract, or tort (including negligence), or otherwise.

STANDARD TERMS AND CONDITIONS OF SALEIndustrial Rubber Products

9. LIMITATION OF LIABILITY: Seller shall not be liable in contract, in tort (includingnegligence),or otherwise for damage or loss of other property, loss of profits or revenue,loss of use of property or equipment, claims of customers of the Buyer, or for any special, indirect, incidental, or consequential damages whatsoever. Under no circumstances shallSeller’s liability exceed the purchase price of the goods in respect of which damages areclaimed.10. PRODUCTS SUITABILITY AND LENGTH OF SERVICE: Determination of thesuitability of the goods for the uses and applications contemplated by Buyer and othersshall be the sole responsibility of the Buyer or user. No guaranty is given with respect tolength of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since theconditions of the use and application by Buyer and others are beyond Seller’s control.11. FORCE MAJEURE: Seller shall not be liable for failure to perform or for delay inperformance due to fire, flood, strike or other labor difficulty (Seller shall not be required to settle any labor matter against its own best judgment), act of God, act of any governmentauthority, acts or omissions of the Buyer, riot, embargo, explosion, accident, breakdown of machinery or equipment, shortage of or inability to obtain fuel, power, raw materials,equipment, transportation of the product at usual prices or usual sources, or due to anyother cause beyond its reasonable control. Quantities so affected by such circumstancesmay be eliminated without liability, but this Agreement shall otherwise remain unaffected.12. RETURNED GOODS: No goods may be returned without Seller’s prior writtenauthorization. Each request for exchange or return shall describe the condition of the goods and the reasons for the requested return or exchange. If the Seller agrees to accept a return or exchange, the Buyer shall pay return transportation cost and a restocking charge; therestocking charge will be determined based upon the Seller’s ability to resell the exchanged or returned material and the reason for the return.13. QUANTITY VARIANCE: Due to manufacturing variances, the quantity of goodsdelivered will be within 10%, more or less, of the quantity specified and shall be charged at the unit price herein.14. ENTIRE AGREEMENT: This Agreement constitutes the complete and final Agreement of sale and purchase of the goods specified herein and supersedes all prior contracts and discussions. No modification hereof shall be effected by the use of purchase order,acknowledgment, acceptance, or other forms at variance with or in addition to the termsand conditions contained herein. No modification shall be effected in any manner other than in writing and signed by the party claimed to be bound thereby.15. GOVERNING LAW: This contract shall be governed by and construed under the lawsof the State of California.16. TRANSPORTATION POLICY: All deliveries will be made F.O.B. Point of Shipment,freight calculated and billed when releases for shipment are below the stated freightallowances for the product ordered, released and shipped. For specific freight allowancesplease refer to catalog sections for products ordered. Freight prepaid and allowed by most economical routing on shipments weighing 3,000 lbs or more to one destination, from one location, one shipment, one purchase order, within the continental United States. Applicable surcharges and/or accessorial charges are not covered and will be billed accordingly.Freight allowance applies to roll goods of WARCO calendered Sheet products and BiltriteSheet & Matting products only. Does not apply to "Buy the Foot" items or extruded, molded, and spliced products. Orders including both stock and made-to-order items will not becombined for weight unless the stock items are stocked at the manufacturing plantproducing the made-to-order items and the customer is willing to wait for shipment at onetime to one destination. All price page and catalog weights are approximate and actualshipping weights may vary from these listings. In case of dispute, actual shipping weightswill apply. Origin, Method of Shipping and Routing: Seller will determine the point oforigin of shipment, the method of transportation and the routing of shipment. Purchasersrequiring shipment by a method or routing other than that will be billed any excess orpremium in transportation charges. If Seller elects to ship by other than common carrier,the full transportation charges will be prepaid and any freight charges billable (underallowances) will be calculated and billed. Purchaser Pick Up: No allowance will be made in lieu of transportation if the buyer accepts shipment at the factory or the warehouse orfreight station. Transportation charges will not be deducted from the selling price.17. CONCEALED DAMAGE: Seller will not participate in any settlement of claims forconcealed damage. Upon receipt of any shipment, Buyer must unpack immediately and, if damage is discovered, must:

• Not move the product from the point of examination• Retain shipping container and packing material• Notify the carrier’s agent to make an inspection and confirm in writing• Send Seller a copy of the carrier’s inspection report• Make a claim for damage with the carrier• Recovery for any damage to merchandise incurred during shipping shall be the sole

responsibility of Buyer. Any such damage shall not defeat or otherwise affect theobligation of Buyer to pay all amounts due Seller with respect to the damaged goods.

18. CANCELLATION: Requests for cancellation or modification of orders must besubmitted in writing and received by Seller at least 2 days prior to shipment. Anycancellation or modification will be effective only when acknowledged in writing by Sellerand can be made subject to status of production of goods. Orders for merchandiseproduced specifically for a customer cannot be canceled once goods are produced.19. ACCEPTANCE OF ORDERS: Issuance of any Catalog or Price List does not constitute an offer for the sale of any products described therein. All orders are subject to theacceptance of Seller. All orders accepted by Seller are accepted on the understanding that Buyer, by placing the order, has agreed to these Standard Terms & Conditions of Sale and that they are therefore part of the Buyer's order. 20. ATTORNEYS’ FEES AND VENUE: In any action to collect amounts due Seller withrespect to sales made to Buyer, arising out of or relating to this Agreement or any suchsales, or in which a party seeks an interpretation of this Agreement or asserts it as adefense, the prevailing party shall be entitled to recover attorneys’ fees in an amountdetermined by the Court to be reasonable, as well as such party’s costs of suit. All notices, requests, claims and other communications by Buyer with respect to this Agreement or sales hereunder shall be directed to Seller at its executive offices at 1337 Braden Court, Orange, California 92868 (714) 532-3355. Any action brought by Buyer against Seller must be brought in a state or federal court located in Orange County, California, and any action brought in any other location shall, upon appropriate motion by Seller, be dismissed.

WEST AMERICAN RUBBER COMPANY, LLC | 1337 BRADEN COURT, ORANGE, CALIFORNIA 92868 | TEL: 714-532-3355 | [email protected] RIPLEY OPERATIONS, LLC | 16310 HIGHWAY 15 NORTH, RIPLEY, MISSISSIPPI 38663 | TEL: 800-245-8748 | [email protected]

TERMS AND CONDITIONS OF SALE ARE SUBJECT TO CHANGE WITHOUT NOTICE. VISIT WWW.WARCO.COM/TERMS FOR THE MOST CURRENT TERMS AND CONDITIONS.

Sales, Manufacturing & Distribution750 North Main Street


Fax: 714-532-2238Email: [email protected]

Sales, Manufacturing & Distribution16310 Highway 15 NorthRipley, Mississippi 38663

Tel: 800-245-8748Fax: 662-837-0132

Email: [email protected]

Corporate Office1337 Braden Court


Fax: 714-532-2238

West American Rubber Company, LLC

Biltrite Ripley Operations, LLC

For more information please visit us at warco.com

Contents © Copyright West American Rubber Company, LLC 2017. All rights reserved.

rubber products catalog

Documents